Update & Latest for ISO Standards
Page -1 -2
ISO 4720:2009 Essential oils - Nomenclature
ISO 23185:2009 Assessment and benchmarking of terminological resources - General concepts, principles and requirements
ISO 4378-1:2009 Plain bearings - Terms, definitions, classification and symbols - Part 1: Design, bearing materials and their properties
ISO 4378-2:2009 Plain bearings - Terms, definitions, classification and symbols - Part 2: Friction and wear
ISO 4378-3:2009 Plain bearings - Terms, definitions, classification and symbols - Part 3: Lubrication
ISO 4378-4:2009 Plain bearings - Terms, definitions, classification and symbols - Part 4: Basic symbols
ISO 4378-5:2009 Plain bearings - Terms, definitions, classification and symbols - Part 5: Application of symbols
ISO 10002/Cor1:2009 Quality management - Customer satisfaction - Guidelines for complaints handling in organizations - Corrigendum 1
ISO 3951-2/Amd1:2009 Sampling procedures for inspection by variables - Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics - Amendment 1
IEC/FDIS 31010 Risk management - Risk assessment techniques
ISO 14813-6:2009 Intelligent transport systems - Reference model architecture(s) for the ITS sector - Part 6: Data presentation in ASN.1
ISO/TS 17574:2009 Electronic fee collection - Guidelines for security protection profiles
ISO 25424:2009 Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices
ISO 14161:2009 Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results
ISO 21072-2:2009 Ships and marine technology - Marine environment protection: performance testing of oil skimmers - Part 2: Static water conditions
ISO 5667-15:2009 Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples
ISO 23161:2009 Soil quality - Determination of selected organotin compounds - Gas-chromatographic method
ISO 18857-2:2009 Water quality - Determination of selected alkylphenols - Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation
ISO 16063-31:2009 Methods for the calibration of vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity
ISO/IEC Guide 98-1:2009 Uncertainty of measurement - Part 1: Introduction to the expression of uncertainty in measurement
ISO 3548-2:2009 Plain bearings - Thin-walled half bearings with or without flange - Part 2: Measurement of wall thickness and flange thickness
ISO 20806:2009 Mechanical vibration - Criteria and safeguards for the in-situ balancing of medium and large rotors
ISO 8434-6:2009 Metallic tube connections for fluid power and general use - Part 6: 60 degree cone connectors with or without O-ring
ISO 8521:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the apparent initial circumferential tensile strength
ISO 3949:2009 Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification
ISO/TS 15877-7:2009 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity
ISO 13479:2009 Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes
ISO 10928:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
ISO 18435-1:2009 Industrial automation systems and integration - Diagnostics, capability assessment and maintenance applications integration - Part 1: Overview and general requirements
ISO 10303-235:2009 Industrial automation systems and integration - Product data representation and exchange - Part 235: Application protocol: Engineering properties for product design and verification
ISO 10643:2009 Dimensions of accessories for cutter arbors with parallel key and tenon drive
ISO 9463:2009 Nuclear energy - Nuclear fuel technology - Determination of plutonium in nitric acid solutions by spectrophotometry
ISO 12967-1:2009 Health informatics - Service architecture - Part 1: Enterprise viewpoint
ISO 12967-2:2009 Health informatics - Service architecture - Part 2: Information viewpoint
ISO 12967-3:2009 Health informatics - Service architecture - Part 3: Computational viewpoint
ISO 19144-1:2009 Geographic information - Classification systems - Part 1: Classification system structure
ISO 19111-2:2009 Geographic information - Spatial referencing by coordinates - Part 2: Extension for parametric values
ISO 25720:2009 Health informatics - Genomic Sequence Variation Markup Language (GSVML)
ISO/TR 25257:2009 Health informatics - Business requirements for an international coding system for medicinal products
ISO 24097-1:2009 Intelligent transport systems - Using web services (machine-machine delivery) for ITS service delivery - Part 1: Realization of interoperable web services
ISO 22179:2009 Intelligent transport systems - Full speed range adaptive cruise control (FSRA) systems - Performance requirements and test procedures
ISO 11012:2009 Heavy commercial vehicles and buses - Open-loop test methods for the quantification of on-centre handling - Weave test and transition test
ISO 10088:2009 Small craft - Permanently installed fuel systems
ISO 2563:2009 Aircraft ducting and piping - Profile dimensions for flanges of V-band couplings
ISO 22915-21:2009 Industrial trucks - Verification of stability - Part 21: Order-picking trucks with operator position elevating above 1 200 mm
ISO 22915-7:2009 Industrial trucks - Verification of stability - Part 7: Bidirectional and multidirectional trucks
ISO 14401-1:2009 Earth-moving machinery - Field of vision of surveillance and rear-view mirrors - Part 1: Test methods
ISO 14401-2:2009 Earth-moving machinery - Field of vision of surveillance and rear-view mirrors - Part 2: Performance criteria
ISO 4918:2009 Resilient, textile and laminate floor coverings - Castor chair test
ISO 105-G02/Cor2:2009 Textiles - Tests for colour fastness - Part G02: Colour fastness to burnt-gas fumes - Corrigendum
ISO 24631-1:2009 Radiofrequency identification of animals - Part 1: Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and use of a manufacturer code)
ISO 24631-2:2009 Radiofrequency identification of animals - Part 2: Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785
ISO 24631-3:2009 Radiofrequency identification of animals - Part 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785
ISO 24631-4:2009 Radiofrequency identification of animals - Part 4: Evaluation of performance of RFID transceivers conforming with ISO 11784 and ISO 11785
ISO 4254-6:2009 Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors
ISO 28139:2009 Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements
ISO 1871:2009 Food and feed products - General guidelines for the determination of nitrogen by the Kjeldahl method
ISO 11053:2009 Vegetable fats and oils - Determination of cocoa butter equivalents in milk chocolate
ISO 28198:2009 Vegetable fats and oils - Determination of toluene insoluble matter
ISO/TR 26369:2009 Cosmetics - Sun protection test methods - Review and evaluation of methods to assess the photoprotection of sun protection products
ISO 17824:2009 Petroleum and natural gas industries - Downhole equipment - Sand screens
ISO 11158:2009 Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HH, HL, HM, HV and HG
ISO 6892-1:2009 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
ISO 18352:2009 Carbon-fibre-reinforced plastics - Determination of compression-after-impact properties at a specified impact-energy level
ISO 1658:2009 Natural rubber (NR) - Evaluation procedure
ISO 2006-2:2009 Rubber latex, synthetic - Determination of mechanical stability - Part 2: Moderate-speed method under load
ISO 4662:2009 Rubber, vulcanized or thermoplastic - Determination of rebound resilience
ISO 2006-1:2009 Rubber latex, synthetic - Determination of mechanical stability - Part 1: High-speed method
ISO 2476:2009 Butadiene rubber (BR) - Solution-polymerized types - Evaluation procedures
ISO 2322:2009 Styrene-butadiene rubber (SBR) - Emulsion- and solution-polymerized types - Evaluation procedures
ISO 6804:2009 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers - Specification
ISO 25518:2009 Single-use rubber gloves for general applications - Specification
ISO 21627-1:2009 Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine
ISO 21627-2:2009 Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine
ISO 21627-3:2009 Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine
ISO 11093-5:2009 Paper and board - Testing of cores - Part 5: Determination of characteristics of concentric rotation
ISO 28199-1:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels
ISO 28199-2:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling
ISO 28199-3:2009 Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power
ISO/IEC TR 14165-312:2009 Information technology - Fibre Channel - Part 312: Avionics environment upper layer protocol MIL-STD-1553B Notice 2 (FC-AE-1553)
ISO/IEC 9594-9:2008 Information technology - Open Systems Interconnection - The Directory: Replication
ISO/IEC 9834-1:2008 Information technology - Open Systems Interconnection - Procedures for the operation of OSI Registration Authorities: General procedures and top arcs of the International Object Identifier tree
ISO/IEC 29199-2:2009 JPEG XR image coding system - Part 2: Image coding specification
ISO/IEC 9834-3:2008 Information technology - Open Systems Interconnection - Procedures for the operation of OSI Registration Authorities: Registration of Object Identifier arcs beneath the top-level arc jointly administered by ISO and ITU-T
ISO/IEC 9834-7:2008 Information technology - Open Systems Interconnection - Procedures for the operation of OSI Registration Authorities: Joint ISO and ITU-T Registration of International Organizations
ISO/IEC 9834-8:2008 Information technology - Open Systems Interconnection - Procedures for the operation of OSI Registration Authorities: Generation and registration of Universally Unique Identifiers (UUIDs) and their use as ASN.1 Object Identifier components
ISO/IEC 24713-3:2009 Information technology - Biometric profiles for interoperability and data interchange - Part 3: Biometrics-based verification and identification of seafarers
ISO/IEC 23000-4/Amd2:2009 - Amendment 2: Conformance and reference software for protected musical slide show application format
ISO/IEC 14496-3:2009 Information technology - Coding of audio-visual objects - Part 3: Audio
ISO/IEC 15459-8:2009 Information technology - Unique identifiers - Part 8: Grouping of transport units
ISO/IEC 15963:2009 Information technology - Radio frequency identification for item management - Unique identification for RF tags
ISO/IEC 11770-2/Cor1:2009 Information technology - Security techniques - Key management - Part 2: Mechanisms using symmetric techniques - Corrigendum 1
ISO/IEC 11770-3/Cor1:2009 Information technology - Security techniques - Key management - Part 3: Mechanisms using asymmetric techniques - Corrigendum 1
ISO/IEC 11770-4/Cor1:2009 Information technology - Security techniques - Key management - Part 4: Mechanisms based on weak secrets - Corrigendum 1
ISO/IEC 9798-3/Cor1:2009 Information technology - Security techniques - Entity authentication mechanisms - Part 3: Entity authentication using a public key algorithm - Corrigendum
ISO/IEC 9798-4/Cor1:2009 Information technology - Security techniques - Entity authentication - Part 4: Mechanisms using a cryptographic check function - Corrigendum
ISO/IEC 9798-6/Cor1:2009 Corrigendum
ISO/IEC 1539-1/Cor4:2009 Information technology - Programming languages - Fortran - Part 1: Base language - Corrigendum
ISO/IEC 9945:2009 Information technology - Portable Operating System Interface (POSIXr) Base Specifications, Issue 7
ISO/IEC 15444-4/Cor1:2009 Information technology - JPEG 2000 image coding system: Conformance testing - Corrigendum 1
ISO/IEC 23003-1/Amd2/Cor1:2009 Information technology - MPEG audio technologies - Part 1: MPEG Surround - Amendment 2:Reference software - Corrigendum 1
ISO/IEC 18000-2:2009 Information technology - Radio frequency identification for item management - Part 2: Parameters for air interface communications below 135 kHz
ISO/IEC 24739-1:2009 Information technology - AT Attachment with Packet Interface - 7 - Part 1: Register Delivered Command Set, Logical Register Set (ATA/ATAPI-7 V1)
ISO/IEC 14651/Amd1:2009 Information technology - International string ordering and comparison - Method for comparing character strings and description of the common template tailorable ordering - Amendment 1
ISO/IEC 14496-12/Cor3:2009 Corrigendum
ISO/IEC 15444-12/Cor3:2009 Corrigendum
ISO/IEC 23003-1/Cor2:2009 Corrigendum
ISO/IEC 24702/Amd1:2009 Information technology - Generic cabling - Industrial premises - Amendment 1
ISO 7131:2009 Earth-moving machinery - Loaders - Terminology and commercial specifications
ISO/DIS 26000 Guidance on social responsibility
ISO 22514-1:2009 Statistical methods in process management - Capability and performance - Part 1: General principles and concepts
ISO 24978:2009 Intelligent transport systems - ITS Safety and emergency messages using any available wireless media - Data registry procedures
ISO 9362:2009 Banking - Banking telecommunication messages - Business identifier code (BIC)
ISO 80601-2-56:2009 Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
ISO 8612:2009 Ophthalmic instruments - Tonometers
ISO 21987:2009 Ophthalmic optics - Mounted spectacle lenses
ISO 21969:2009 High-pressure flexible connections for use with medical gas systems
ISO 11980:2009 Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations
ISO 10993-1:2009 Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process
ISO 14937:2009 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
ISO/TS 21220:2009 Particulate air filters for general ventilation - Determination of filtration performance
ISO 16000-17/Cor1:2009 Indoor air - Part 17: Detection and enumeration of moulds - Culture-based method - Corrigendum 1
ISO 15011-3:2009 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding
ISO 15011-2:2009 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc wel
ISO 15011-1:2009 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis
ISO/TS 10832:2009 Soil quality - Effects of pollutants on mycorrhizal fungi - Spore germination test
ISO/TR 21808:2009 Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters
ISO 7919-4:2009 Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 4: Gas turbine sets with fluid-film bearings
ISO 10816-4:2009 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 4: Gas turbine sets with fluid-film bearings
ISO 7919-2:2009 Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
ISO 10816-2:2009 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
ISO 10816-1/Amd1:2009 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines - Amendment 1
ISO/TR 1281-2/Cor1:2009 Rolling bearings - Explanatory notes on ISO 281 - Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses - Corrigendum 1
ISO/TR 1281-1/Cor1:2009 Rolling bearings - Explanatory notes on ISO 281 - Part 1: Basic dynamic load rating and basic rating life - Corrigendum 1
ISO 5753-1:2009 Rolling bearings - Internal clearance - Part 1: Radial internal clearance for radial bearings
ISO 10770-1:2009 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1: Test methods for four-port directional flow-control valves
ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
ISO 4395:2009 Fluid power systems and components - Cylinder piston rod end types and dimensions
ISO 1402:2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
ISO/TR 20173:2009 Welding - Grouping systems for materials - American materials
ISO 2560:2009 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification
ISO/TS 22224:2009 Health informatics - Electronic reporting of adverse drug reactions
ISO 15782-1:2009 Certificate management for financial services - Part 1: Public key certificates
ISO/PAS 28005-2:2009 Security management systems for the supply chain - Electronic port clearance (EPC) - Part 2: Core data elements
ISO/TR 15801:2009 Document management - Information stored electronically - Recommendations for trustworthiness and reliability
ISO 3780:2009 Road vehicles - World manufacturer identifier (WMI) code
ISO 7612:2009 Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions
ISO 3779:2009 Road vehicles - Vehicle identification number (VIN) - Content and structure
ISO/TR 10603:1992 Road vehicles - Legal situation concerning lighting and light-signalling devices
ISO 30003:2009 Ships and marine technology - Ship recycling management systems - Requirements for bodies providing audit and certification of ship recycling management
ISO 10596:2009 Ships and marine technology - Marine wind vane and anemometers
ISO 105-B08/Amd1:2009 Textiles - Tests for colour fastness - Part B08: Quality control of blue wool reference materials 1 to 7 - Amendment 1
ISO 28499-1:2009 Buffalo hides and buffalo calf skins - Part 1: Description of defects
ISO 28499-2:2009 Buffalo hides and buffalo calf skins - Part 2: Grading on the basis of mass and size
ISO 28499-3:2009 Buffalo hides and buffalo calf skins - Part 3: Grading on the basis of defects
ISO 105-J03:2009 Textiles - Tests for colour fastness - Part J03: Calculation of colour differences
ISO 18696/Cor1:2009 Corrigendum
ISO 1833-20:2009 Textiles - Quantitative chemical analysis - Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide)
ISO 27587:2009 Leather - Chemical tests - Determination of the free formaldehyde in process auxiliaries
ISO 20369:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content
ISO 20370:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content
ISO 3308/Amd1:2009 Tobacco and tobacco products - Routine analytical cigarette-smoking machine - Definitions, standard conditions and auxiliary equipment - Amendment 1
ISO 3400/Amd1:2009 Tobacco and tobacco products - Determination of alkaloids in cigarette smoke condensates - Spectrophotometric method - Amendment 1
ISO 8454/Amd1:2009 Cigarettes - Determination of carbon monoxide in the vapour phase of smoke (NDIR method) - Amendment 1
ISO 24557:2009 Pulses - Determination of moisture content - Air-oven method
ISO 11865:2009 Instant whole milk powder - Determination of white flecks number
ISO 11870:2009 Milk and milk products - Determination of fat content - General guidance on the use of butyrometric methods
ISO 12080-1:2009 Dried skimmed milk - Determination of vitamin A content - Part 1: Colorimetric method
ISO 12080-2:2009 Dried skimmed milk - Determination of vitamin A content - Part 2: Method using high-performance liquid chromatography
ISO 14378:2009 Milk and dried milk - Determination of iodide content - Method using high-performance liquid chromatography
ISO 8196-1:2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Part 1: Analytical attributes of alternative methods
ISO 8196-2:2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Part 2: Calibration and quality control in the dairy laboratory
ISO 8196-3:2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
ISO/TS 16634-2:2009 Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 2: Cereals, pulses and milled cereal products
ISO 927:2009 Spices and condiments - Determination of extraneous matter and foreign matter content
ISO 3890-1:2009 Milk and milk products - Determination of residues of organochlorine compounds (pesticides) - Part 1: General considerations and extraction methods
ISO 3890-2:2009 Milk and milk products - Determination of residues of organochlorine compounds (pesticides) - Part 2: Test methods for crude extract purification and confirmation
ISO/TR 16268:2009 Surface chemical analysis - Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation
ISO 6145-9:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method
ISO 7404-2:2009 Methods for the petrographic analysis of coals - Part 2: Methods of preparing coal samples
ISO 7404-3:2009 Methods for the petrographic analysis of coals - Part 3: Method of determining maceral group composition
ISO 7404-5:2009 Methods for the petrographic analysis of coals - Part 5: Method of determining microscopically the reflectance of vitrinite
ISO 28300/Cor1:2009 Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks - Corrigendum 1
ISO 12917-1/Cor1:2009 Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 1: Manual methods - Corrigendum 1
ISO 10407-2/Cor1:2009 Petroleum and natural gas industries - Rotary drilling equipment - Part 2: Inspection and classification of used drill stem elements - Corrigendum 1
ISO 15156-1:2009 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials
ISO 15156-2:2009 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
ISO 15156-3:2009 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
ISO 3907:2009 Hardmetals - Determination of total carbon - Gravimetric method
ISO 3908:2009 Hardmetals - Determination of insoluble (free) carbon - Gravimetric method
ISO/TR 10809-1:2009 Cast irons - Part 1: Materials and properties for design
ISO 20501/Cor1:2009 Fine ceramics (advanced ceramics, advanced technical ceramics) - Weibull statistics for strength data - Corrigendum 1
ISO 26842-1:2009 Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 1: Resistance to delamination in non-severe environments
ISO 26842-2:2009 Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 2: Resistance to delamination in severe environments
ISO 28078-2:2009 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 28078-1:2009 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 2470-1:2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness)
ISO 5631-1:2009 Paper and board - Determination of colour by diffuse reflectance - Part 1: Indoor daylight conditions (C/2 degrees)
ISO 787-7:2009 General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure
ISO 7579:2009 Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods
ISO 21873-2:2009 Building construction machinery and equipment - Mobile crushers - Part 2: Safety requirements
ISO 29805:2009 Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes
ISO 24011:2009 Resilient floor coverings - Specification for plain and decorative linoleum
ISO/IEC 15444-4/Cor1:2009 Information technology - JPEG 2000 image coding system: Conformance testing - Corrigendum 1
ISO/IEC 23003-1/Amd2/Cor1:2009 Information technology - MPEG audio technologies - Part 1: MPEG Surround - Amendment 2:Reference software - Corrigendum 1
ISO/IEC 18000-2:2009 Information technology - Radio frequency identification for item management - Part 2: Parameters for air interface communications below 135 kHz
ISO/IEC 24739-1:2009 Information technology - AT Attachment with Packet Interface - 7 - Part 1: Register Delivered Command Set, Logical Register Set (ATA/ATAPI-7 V1)
ISO/IEC 14651/Amd1:2009 Information technology - International string ordering and comparison - Method for comparing character strings and description of the common template tailorable ordering - Amendment 1
ISO/IEC 14496-12/Cor3:2009 Corrigendum
ISO/IEC 15444-12/Cor3:2009 Corrigendum
ISO/IEC 23003-1/Cor2:2009 Corrigendum
ISO/IEC 24702/Amd1:2009 Information technology - Generic cabling - Industrial premises - Amendment 1
ISO/IEC 26513:2009 Systems and software engineering - Requirements for testers and reviewers of user documentation
ISO/IEC 19794-2/Cor1:2009 Corrigendum
ISO/IEC 9995-7:2009 Information technology - Keyboard layouts for text and office systems - Part 7: Symbols used to represent functions
ISO/IEC 9995-8:2009 Information technology - Keyboard layouts for text and office systems - Part 8: Allocation of letters to the keys of a numeric keypad
ISO/IEC 9995-5:2009 Information technology - Keyboard layouts for text and office systems - Part 5: Editing and function section
ISO/IEC 9995-4:2009 Information technology - Keyboard layouts for text and office systems - Part 4: Numeric section
ISO/IEC 9995-2:2009 Information technology - Keyboard layouts for text and office systems - Part 2: Alphanumeric section
ISO/IEC 9995-1:2009 Information technology - Keyboard layouts for text and office systems - Part 1: General principles governing keyboard layouts
ISO/IEC 9594-3/Cor2:2009 Extensions to Support Paged Result on the DSP - Corrigendum
ISO/IEC 9594-6/Cor2:2009 Extensions to Support Paged Result on the DSP - Corrigendum
ISO/IEC 14496-5/Amd24:2009 Reference software for MPEG-4 - Amendment 2: Reference software for AAC-ELD
ISO/IEC 14496-5/Amd22:2009 Reference software for MPEG-4 - Amendment 2: Reference software for 3D Graphics Compression Model (3DGCM)
ISO/IEC TR 20000-3:2009 Information technology - Service management - Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1
ISO/IEC 10646/Amd6:2009 - Amendment 6: Bamum, Javanese, Lisu, Meetei Mayek, Samaritan, and other characters
ISO/IEC 11693-2:2009 Identification cards - Optical memory cards - Part 2: Co-existence of optical memory with other machine readable technologies
ISO 7240-18:2009 Fire detection and alarm systems - Part 18: Input/output devices
ISO 3822-3/Amd1:2009 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances - Amendment 1
ISO 702-2/Cor1:2009 Machine tools - Spindle noses and face plates - Sizes for interchangeability - Part 2: Camlock type - Corrigendum 1
ISO/TS 22224:2009 Health informatics - Electronic reporting of adverse drug reactions
ISO 19126:2009 Geographic information - Feature concept dictionaries and registers
ISO 15511:2009 Information and documentation - International standard identifier for libraries and related organizations (ISIL)
ISO 9100-3/Cor1:2009 Glass containers - Vacuum lug finishes - Part 3: 38 regular - Corrigendum 1
ISO 9100-4/Cor1:2009 Glass containers - Vacuum lug finishes - Part 4: 38 medium - Corrigendum 1
ISO 22958/Cor1:2009 Textiles - Water resistance - Rain tests: exposure to a horizontal water spray - Corrigendum 1
ISO 6145-5:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices
ISO/TR 4277:2009 Cryolite, natural and artificial - Conventional test for evaluation of free fluorides content
ISO 13503-2/Amd1:2009 Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations - Amendment 1: Addition of Annex B: Proppand specification
ISO/IEC 19776-1:2009 Information technology - Computer graphics, image processing and environmental data representation - Extensible 3D (X3D) encodings - Part 1: Extensible Markup Language (XML) encoding
ISO/IEC 13818-1/Amd3:2009 Information technology - Generic coding of moving pictures and associated audio information: Systems - Amendment 3: Transport of Scalable Video
ISO 10077-1/Cor1:2009 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: Simplified method - Corrigendum
ISO 10303-104/Cor1:2009 Industrial automation systems and integration - Product data representation and exchange - Part 104: Integrated application resource: Finite element analysis - Corrigendum 1
ISO 10596:2009 Ships and marine technology - Marine wind vane and anemometers
ISO 105-F10/Amd1:2009 Textiles - Tests for colour fastness - Part F10: Specification for adjacent fabric: Multifibre - Amendment 1
ISO 10704:2009 Water quality - Measurement of gross alpha and gross beta activity in non-saline water - Thin source deposit method
ISO 10874:2009 Resilient, textile and laminate floor coverings - Classification
ISO 10975:2009 Tractors and machinery for agriculture - Auto-guidance systems for operator-controlled tractors and self-propelled machines - Safety requirements
ISO 10991:2009 Micro process engineering - Vocabulary
ISO 10993-1:2009 Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process
ISO 10993-7/Cor1:2009 Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals - Corrigendum 1
ISO 11296-1:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
ISO 11296-3:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes
ISO 11296-4:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes
ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
ISO 11545:2009 Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution
ISO 11737-2:2009 Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process
ISO 11980:2009 Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations
ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient
ISO 12256/Cor1:2009 Aerospace - Drives, internal, cruciform, ribbed - Metric series - Corrigendum 1
ISO 12706:2009 Non-destructive testing - Penetrant testing - Vocabulary
ISO 13351:2009 Fans - Dimensions
ISO 13624-1:2009 Petroleum and natural gas industries - Drilling and production equipment - Part 1: Design and operation of marine drilling riser equipment
ISO 13824:2009 Bases for design of structures - General principles on risk assessment of systems involving structures
ISO 1402:2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
ISO 14243-1:2009 Implants for surgery - Wear of total knee-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
ISO 14243-2:2009 Implants for surgery - Wear of total knee-joint prostheses - Part 2: Methods of measurement
ISO 14343:2009 Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification
ISO 148-1:2009 Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 14937:2009 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
ISO 15011-1:2009 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis
ISO 15011-2:2009 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 2: Determination of the emission rates of carbon monoxide (CO), carbon dioxide (CO2), nitrogen monoxide (NO) and nitrogen dioxide (NO2) during arc wel
ISO 15011-3:2009 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 3: Determination of ozone emission rate during arc welding
ISO 15156-1:2009 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials
ISO 15156-2:2009 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
ISO 15156-3:2009 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
ISO 15590-1:2009 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends
ISO 15782-1:2009 Certificate management for financial services - Part 1: Public key certificates
ISO 16894:2009 Wood-based panels - Oriented strand board (OSB) - Definitions, classification and specifications
ISO 17264:2009 Intelligent transport systems - Automatic vehicle and equipment identification - Interfaces
ISO 17267:2009 Intelligent transport systems - Navigation systems - Application programming interface (API)
ISO 17364:2009 Supply chain applications of RFID - Returnable transport items (RTIs)
ISO 17365:2009 Supply chain applications of RFID - Transport units
ISO 17366:2009 Supply chain applications of RFID - Product packaging
ISO 17367:2009 Supply chain applications of RFID - Product tagging
ISO 1833-20:2009 Textiles - Quantitative chemical analysis - Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide)
ISO 21809-4:2009 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 4: Polyethylene coatings (2-layer PE)
ISO 21873-2:2009 Building construction machinery and equipment - Mobile crushers - Part 2: Safety requirements
ISO 21969:2009 High-pressure flexible connections for use with medical gas systems
ISO 22009:2009 Space systems - Space environment (natural and artificial) - Model of the earths magnetospheric magnetic field
ISO 22769:2009 Oil of Australian sandalwood (Santalum spicatum (R.Br.) A.DC.)
ISO 22966:2009 Execution of concrete structures
ISO 23848-1:2009 Machine tools - Ball splines - Part 1: General characteristics and requirements
ISO 23848-2:2009 Machine tools - Ball splines - Part 2: Dynamic and static load ratings and rating life
ISO 24011:2009 Resilient floor coverings - Specification for plain and decorative linoleum
ISO 25111:2009 Intelligent transport systems - Communications access for land mobiles (CALM) - General requirements for using public networks
ISO 2560:2009 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification
ISO 26782/Cor1:2009 Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time forced expired volumes in humans - Corrigendum 1
ISO 26866:2009 Road vehicles - Brake lining friction materials - Standard wear test procedure for commercial vehicles with air brakes
ISO 27587:2009 Leather - Chemical tests - Determination of the free formaldehyde in process auxiliaries
ISO 28078-1:2009 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 28078-2:2009 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 28981:2009 Mopeds - Methods for setting the running resistance on a chassis dynamometer
ISO 29802:2009 All terrain (AT) tyres and rims - Symbol marked pneumatic tyres on 5 degrees tapered rims - Designation, dimension, marking and load ratings
ISO 29805:2009 Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes
ISO 29861:2009 Document management applications - Quality control for scanning office documents in colour
ISO 29945:2009 Refrigerated non-petroleum-based liquefied gaseous fuels - Dimethylether (DME) - Method of manual sampling onshore terminals
ISO 31000:2009 Risk management - Principles and guidelines
ISO 3308/Amd1:2009 Tobacco and tobacco products - Routine analytical cigarette-smoking machine - Definitions, standard conditions and auxiliary equipment - Amendment 1
ISO 3375:2009 Textile glass - Determination of stiffness of rovings
ISO 3400/Amd1:2009 Tobacco and tobacco products - Determination of alkaloids in cigarette smoke condensates - Spectrophotometric method - Amendment 1
ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs
ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts
ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress
ISO 3506-4:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws
ISO 3601-1/Cor2:2009 Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and size identification code - Corrigendum 2
ISO 3691-5:2009 Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks
ISO 3779:2009 Road vehicles - Vehicle identification number (VIN) - Content and structure
ISO 3780:2009 Road vehicles - World manufacturer identifier (WMI) code
ISO 3890-1:2009 Milk and milk products - Determination of residues of organochlorine compounds (pesticides) - Part 1: General considerations and extraction methods
ISO 3890-2:2009 Milk and milk products - Determination of residues of organochlorine compounds (pesticides) - Part 2: Test methods for crude extract purification and confirmation
ISO 4023:2009 Rubber hoses and hose assemblies for steam - Test methods
ISO 4395:2009 Fluid power systems and components - Cylinder piston rod end types and dimensions
ISO 4468/Cor1:2009 Gear hobs - Accuracy requirements - Corrigendum 1
ISO 5536:2009 Milk fat products - Determination of water content - Karl Fischer method
ISO 5631-1:2009 Paper and board - Determination of colour by diffuse reflectance - Part 1: Indoor daylight conditions (C/2 degrees)
ISO 5753-1:2009 Rolling bearings - Internal clearance - Part 1: Radial internal clearance for radial bearings
ISO 6550-4:2009 Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 4: M8 x 1 glow-plugs
ISO 704:2009 Terminology work - Principles and methods
ISO 712:2009 Cereals and cereal products - Determination of moisture content - Reference method
ISO 7176-9:2009 Wheelchairs - Part 9: Climatic tests for electric wheelchairs
ISO 7579:2009 Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods
ISO 7612:2009 Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions
ISO 8000-110:2009 Data quality - Part 110: Master data: Exchange of characteristic data: Syntax, semantic encoding, and conformance to data specification
ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
ISO 8407:2009 Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens
ISO 8454/Amd1:2009 Cigarettes - Determination of carbon monoxide in the vapour phase of smoke (NDIR method) - Amendment 1
ISO 8536-6:2009 Infusion equipment for medical use - Part 6: Freeze drying closures for infusion bottles
ISO 8724:2009 Cork decorative panels - Specification
ISO 8986-1:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 9004:2009 Managing for the sustained success of an organization - A quality management approach
ISO 9004:2009S Gestión para el éxito sostenido de una organización - Enfoque de gestión de la calidad Standard in Spanish
ISO 9100-2/Cor1:2009 Glass containers - Vacuum lug finishes - Part 2: 33 medium - Corrigendum 1
ISO 927:2009 Spices and condiments - Determination of extraneous matter and foreign matter content
ISO 9362:2009 Banking - Banking telecommunication messages - Business identifier code (BIC)
ISO 9462/Amd1:2009 Alpine ski-bindings - Safety requirements and test methods - Amendment 1
ISO Guide 73:2009 Risk management - Vocabulary
ISO Pack: Ergonomics of Electronic Visual Displays Ergonomics of Electronic Visual Displays
ISO/HL7 10781:2009 Electronic Health Record-System Functional Model, Release 1.1
ISO/HL7 27951:2009 Health informatics - Common terminology services, release 1
ISO/IEC 10646/Amd6:2009 Amendment 6: Bamum, Javanese, Lisu, Meetei Mayek, Samaritan, and other characters
ISO/IEC 13170:2009 Information technology - 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD re-recordable disk for dual layer (DVD-RW for DL)
ISO/IEC 14496-12/Amd1:2009 Information technology - Coding of audio-visual objects - Part 12: ISO base media file format- Amendment 1: General improvements including hint tracks, metadata support and sample groups
ISO/IEC 14496-5/Amd22:2009 Reference software for MPEG-4 - Amendment 2: Reference software for 3D Graphics Compression Model (3DGCM)
ISO/IEC 14496-5/Amd24:2009 Reference software for MPEG-4 - Amendment 2: Reference software for AAC-ELD
ISO/IEC 15423:2009 Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing
ISO/IEC 15444-12/Amd1:2009 Information technology - JPEG 2000 image coding system - Part 12: ISO base media file format- Amendment 1: General improvements including hint tracks, metadata support and sample groups
ISO/IEC 15909-2:2009 Software and system engineering - High-level Petri nets - Part 2: Transfer Format
ISO/IEC 15944-7:2009 Information technology - Business Operational View - Part 7: eBusiness vocabulary
ISO/IEC 19770-2:2009 Information technology - Software asset management - Part 2: Software identification tag
ISO/IEC 19794-2/Cor1:2009 Corrigendum
ISO/IEC 19794-5/Amd2:2009 - Amendment 2: Three-dimensional face image data interchange format
ISO/IEC 23000-11:2009 Information technology - Multimedia application format (MPEG-A) - Part 11: Stereoscopic video application format
ISO/IEC 26513:2009 Systems and software engineering - Requirements for testers and reviewers of user documentation
ISO/IEC 29171:2009 Information technology - Digitally recorded media for information interchange and storage - Information Versatile Disk for Removable usage (iVDR) cartridge
ISO/IEC 9594-1:2008 Information technology - Open Systems Interconnection - The Directory: Overview of concepts, models and services
ISO/IEC 9594-10:2008 Information technology - Open Systems Interconnection - The Directory: Use of systems management for administration of the Directory
ISO/IEC 9594-2:2008 Information technology - Open Systems Interconnection - The Directory: Models
ISO/IEC 9594-3/Cor2:2009 Extensions to Support Paged Result on the DSP - Corrigendum
ISO/IEC 9594-3:2008 Information technology - Open Systems Interconnection - The Directory: Abstract service definition
ISO/IEC 9594-4:2008 Information technology - Open Systems Interconnection - The Directory: Procedures for distributed operation
ISO/IEC 9594-5:2008 Information technology - Open Systems Interconnection - The Directory: Protocol specifications
ISO/IEC 9594-6/Cor2:2009 Extensions to Support Paged Result on the DSP - Corrigendum
ISO/IEC 9594-6:2008 Information technology - Open Systems Interconnection - The Directory: Selected attribute types
ISO/IEC 9594-7:2008 Information technology - Open Systems Interconnection - The Directory: Selected object classes
ISO/IEC 9594-8/Cor2:2009 Information technology - Open Systems Interconnection - The Directory - Part 8: Authentication framework - Corrigendum
ISO/IEC 9594-8:2008 Information technology - Open Systems Interconnection - The Directory: Public-key and attribute certificate frameworks
ISO/IEC 9995-1:2009 Information technology - Keyboard layouts for text and office systems - Part 1: General principles governing keyboard layouts
ISO/IEC 9995-2:2009 Information technology - Keyboard layouts for text and office systems - Part 2: Alphanumeric section
ISO/IEC 9995-4:2009 Information technology - Keyboard layouts for text and office systems - Part 4: Numeric section
ISO/IEC 9995-5:2009 Information technology - Keyboard layouts for text and office systems - Part 5: Editing and function section
ISO/IEC 9995-7:2009 Information technology - Keyboard layouts for text and office systems - Part 7: Symbols used to represent functions
ISO/IEC 9995-8:2009 Information technology - Keyboard layouts for text and office systems - Part 8: Allocation of letters to the keys of a numeric keypad
ISO/IEC Pack: Conformity Assessment - Laboratories and Inspection Bodies Conformity assessment - Laboratories and inspection bodies
ISO/IEC TR 15938-8/Amd4:2009 Information technology - Multimedia content description interface - Part 8: Extraction and use of MPEG-7 descriptions - Amendment 4: Extraction of audio features from compressed formats
ISO/IEC TR 15944-6:2009 Information technology - Business Operational View - Part 6: Technical introduction to e-Business modelling
ISO/IEC TR 20000-3:2009 Information technology - Service management - Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1
ISO/PAS 13396:2009 Road vehicles - Sled test method to enable the evaluation of side impact protection of child restraint systems - Essential parameters
ISO/PAS 28005-2:2009 Security management systems for the supply chain - Electronic port clearance (EPC) - Part 2: Core data elements
ISO/TR 10255:2009 Document management applications - Optical disk storage technology, management and standards
ISO/TR 10603:1992 Road vehicles - Legal situation concerning lighting and light-signalling devices
ISO/TR 10809-1:2009 Cast irons - Part 1: Materials and properties for design
ISO/TR 11633-1:2009 Health informatics - Information security management for remote maintenance of medical devices and medical information systems - Part 1: Requirements and risk analysis
ISO/TR 11633-2:2009 Health informatics - Information security management for remote maintenance of medical devices and medical information systems - Part 2: Implementation of an information security management system (ISMS)
ISO/TR 15801:2009 Document management - Information stored electronically - Recommendations for trustworthiness and reliability
ISO/TR 21808:2009 Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters
ISO/TS 10832:2009 Soil quality - Effects of pollutants on mycorrhizal fungi - Spore germination test
ISO/TS 12813:2009 Electronic fee collection - Compliance check communication for autonomous systems
ISO/TS 16949:2009 Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
ISO/TS 29062:2009 Road vehicles - Child restraint systems - Sled test method to enable the evaluation of side impact protection
ISO 7131:2009 Earth-moving machinery - Loaders - Terminology and commercial specifications
ISO 80000-1:2009 Quantities and units - Part 1: General
ISO 80000-2:2009 Quantities and units - Part 2: Mathematical signs and symbols to be used in the natural sciences and technology
ISO 80000-10:2009 Quantities and units - Part 10: Atomic and nuclear physics
ISO 639-6:2009 Codes for the representation of names of languages - Part 6: Alpha-4 code for comprehensive coverage of language variants
ISO 16245:2009 Information and documentation - Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents
ISO 5-1:2009 Photography and graphic technology - Density measurements - Part 1: Geometry and functional notation
ISO 369:2009 Machine tools - Symbols for indications appearing on machine tools
ISO 3040:2009 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
ISO 24153:2009 Random sampling and randomization procedures
ISO Guide 34:2009 General requirements for the competence of reference material producers
ISO 10360-2:2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions
ISO/PAS 12868:2009 Geometrical product specification (GPS) - Coordinate measuring machines (CMM): Testing the performance of CMMs using single-stylus contacting probing systems
ISO 11664-5:2009 Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u, v uniform chromaticity scale diagram
ISO 6194-3:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 3: Storage, handling and installation
ISO 22391-1:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General
ISO 22391-2:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes
ISO 22391-3:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings
ISO 22391-5:2009 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system
ISO 12500-4:2009 Filters for compressed air - Methods of test - Part 4: Water
ISO 3046-4:2009 Reciprocating internal combustion engines - Performance - Part 4: Speed governing
ISO/TS 27790:2009 Health informatics - Document registry framework
ISO/HL7 27932:2009 Data Exchange Standards - HL7 Clinical Document Architecture, Release 2
ISO/TS 22600-3:2009 Health informatics - Privilege management and access control - Part 3: Implementations
ISO/TR 11636:2009 Health Informatics - Dynamic on-demand virtual private network for health information infrastructure
ISO/TR 12033:2009 Document management - Electronic imaging - Guidance for the selection of document image compression methods
ISO 5-2:2009 Photography and graphic technology - Density measurements - Part 2: Geometric conditions for transmittance density
ISO 5-3:2009 Photography and graphic technology - Density measurements - Part 3: Spectral conditions
ISO 5-4:2009 Photography and graphic technology - Density measurements - Part 4: Geometric conditions for reflection density
ISO 10924-1:2009 Road vehicles - Circuit breakers - Part 1: Definitions and general test requirements
ISO 10924-4:2009 Road vehicles - Circuit breakers - Part 4: Medium circuit breakers with tabs (Blade type), Form CB15
ISO 26870:2009 Space systems - Launch pad and integration site operational documents
ISO 22915-4:2009 Industrial trucks - Verification of stability - Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height
ISO 2062:2009 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
ISO 10325:2009 Fibre ropes - High modulus polyethylene - 8-strand braided ropes, 12-strand braided ropes and covered ropes
ISO 10547:2009 Polyester fibre ropes - Double braid construction
ISO 10554:2009 Polyamide fibre ropes - Double braid construction
ISO 10556:2009 Fibre ropes of polyester/polyolefin dual fibres
ISO 10572:2009 Mixed polyolefin fibre ropes
ISO 1833-1/Cor1:2009 Textiles - Quantitative chemical analysis - Part 1: General principles of testing - Corrigendum 1
ISO/TS 27105:2009 Milk and milk products - Determination of hens egg white lysozyme by HPLC
ISO/TS 27106:2009 Cheese - Determination of nisin A content by LC-MS and LC-MS-MS
ISO 15136-1:2009 Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps
ISO/TR 29662:2009 Petroleum products and other liquids - Guidance for flash point testing
ISO/TR 13624-2:2009 Petroleum and natural gas industries - Drilling and production equipment - Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report
ISO 6721-12:2009 Plastics - Determination of dynamic mechanical properties - Part 12: Compressive vibration - Non-resonance method
ISO 1926:2009 Rigid cellular plastics - Determination of tensile properties
ISO 10456/Cor1:2009 Thermal insulation - Building materials and products - Determination of declared and design thermal values - Corrigendum 1
ISO/IEC 29141:2009 Information technology - Biometrics - Tenprint capture using biometric application programming interface (BioAPI)
ISO/IEC 20926:2009 Software and systems engineering - Software measurement - IFPUG functional size measurement method 2009
ISO/IEC 26907:2009 Information technology - Telecommunications and information exchange between systems - High-rate ultra-wideband PHY and MAC standard
ISO/IEC 26908:2009 Information technology - Telecommunications and information exchange between systems - MAC-PHY interface for ISO/IEC 26907
ISO/IEC 13156:2009 Information technology - Telecommunications and information exchange between systems - High rate 60 GHz PHY, MAC and HDMI PAL
ISO/IEC 14496-3/Amd1:2009 Information technology - Coding of audio-visual objects - Part 3: Audio - Amendment 1: HD-AAC profile and MPEG Surround signaling
ISO/IEC 13560:2009 Information technology - Telecommunications and information exchange between systems - Procedure for the registration of assigned numbers for ISO/IEC 26907 and ISO/IEC 26908
ISO/IEC 19794-7/Cor1:2009 Information technology - Biometric data interchange formats - Part 7: Signature/sign time series data - Corrigendum 1
ISO/IEC 9541-4/Cor1:2009 Information technology - Font information interchange - Part 4: Harmonization to Open Font Format - Corrigendum 1
ISO/IEC 31010:2009 Risk management - Risk assessment techniques
ISO 10993-9:2009 Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products
ISO 18113-1:2009 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements
ISO 18113-2:2009 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 2: In vitro diagnostic reagents for professional use
ISO 18113-3:2009 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 3: In vitro diagnostic instruments for professional use
ISO 18113-5:2009 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing
ISO 9801:2009 Ophthalmic instruments - Trial case lenses
ISO 8362-1:2009 Injection containers and accessories - Part 1: Injection vials made of glass tubing
ISO 16000-23:2009 Indoor air - Part 23: Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials
ISO 21438-2:2009 Workplace atmospheres - Determination of inorganic acids by ion chromatography - Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid)
ISO 16000-24:2009 Indoor air - Part 24: Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials
ISO 28927-1:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders
ISO 24095:2009 Workplace air - Guidance for the measurement of respirable crystalline silica
ISO 28927-3:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders
ISO 28927-2:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers
ISO 28927-5:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills
ISO 28927-6:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers
ISO 28927-7:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears
ISO 28927-8:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action
ISO 28927-9:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers
ISO 8253-2:2009 Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure-tone and narrow-band test signals
ISO 10360-2:2009 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions
ISO 27895:2009 Vacuum technology - Valves - Leak test
ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General
ISO 1452-2:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes
ISO 1452-3:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings
ISO 1452-4:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves
ISO 1452-5:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system
ISO 4080:2009 Rubber and plastics hoses and hose assemblies - Determination of permeability to gas
ISO 13967:2009 Thermoplastics fittings - Determination of ring stiffness
ISO 18592:2009 Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens
ISO/TS 29002-4:2009 Industrial automation systems and integration - Exchange of characteristic data - Part 4: Basic entities and types
ISO/TS 29002-10:2009 Industrial automation systems and integration - Exchange of characteristic data - Part 10: Characteristic data exchange format
ISO/TS 8000-130:2009 Data quality - Part 130: Master data: Exchange of characteristic data: Accuracy
ISO 16100-1:2009 Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 1: Framework
ISO/TS 8000-140:2009 Data quality - Part 140: Master data: Exchange of characteristic data: Completeness
ISO/TS 29002-31:2009 Industrial automation systems and integration - Exchange of characteristic data - Part 31: Query for characteristic data
ISO 6983-1:2009 Automation systems and integration - Numerical control of machines - Program format and definitions of address words - Part 1: Data format for positioning, line motion and contouring control systems
ISO 14713-1:2009 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance
ISO 14713-2:2009 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing
ISO 14713-3:2009 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing
ISO 3046-4:2009 Reciprocating internal combustion engines - Performance - Part 4: Speed governing
ISO/TS 27790:2009 Health informatics - Document registry framework
ISO 26428-9:2009 Digital cinema (D-cinema) distribution master - Part 9: Image pixel structure level 3 - Serial digital interface signal formatting
ISO 26429-8:2009 Digital cinema (D-cinema) packaging - Part 8: Packing list
ISO 26429-9:2009 Digital cinema (D-cinema) packaging - Part 9: Asset mapping and file segmentation
ISO 26429-10:2009 Digital cinema (D-cinema) packaging - Part 10: Stereoscopic picture track file
ISO 26430-4:2009 Digital cinema (D-cinema) operations - Part 4: Log record format specification
ISO 26430-5:2009 Digital cinema (D-cinema) operations - Part 5: Security log event class and constraints
ISO 26430-6:2009 Digital cinema (D-cinema) operations - Part 6: Auditorium security messages for intra-theater communications
ISO 26430-9:2009 Digital cinema (D-cinema) operations - Part 9: Key delivery bundle
ISO 26433:2009 Digital cinema (D-cinema) - XML data types
ISO 11783-10:2009 Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 10: Task controller and management information system data interchange
ISO/TR 12033:2009 Document management - Electronic imaging - Guidance for the selection of document image compression methods
ISO 13655:2009 Graphic technology - Spectral measurement and colorimetric computation for graphic arts images
ISO 12643-1:2009 Graphic technology - Safety requirements for graphic technology equipment and systems - Part 1: General requirements
ISO 3159:2009 Timekeeping instruments - Wrist-chronometers with spring balance oscillator
ISO 10924-1:2009 Road vehicles - Circuit breakers - Part 1: Definitions and general test requirements
ISO 26870:2009 Space systems - Launch pad and integration site operational documents
ISO 8026:2009 Agricultural irrigation equipment - Sprayers - General requirements and test methods
ISO 17103:2009 Agricultural machinery - Rotary disc mowers, rotary drum mowers and flail mowers - Test methods and acceptance criteria for protective skirts
ISO/TS 27105:2009 Milk and milk products - Determination of hens egg white lysozyme by HPLC
ISO 3093:2009 Wheat, rye and their flours, durum wheat and durum wheat semolina - Determination of the falling number according to Hagberg-Perten
ISO 11701:2009 Vegetable fats and oils - Determination of phospholipids content in lecithins by HPLC using a light-scattering detector
ISO 11702:2009 Animal and vegetable fats and oils - Enzymatic determination of total sterols content
ISO 12966-3:2009 Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters - Part 3: Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH)
ISO 10130:2009 Cosmetics - Analytical methods - Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC, post-column photolysis and derivatization
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
ISO 23954:2009 Oil of lime expressed, Persian type (Citrus latifolia Tanaka)
ISO 15136-1:2009 Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps
ISO 13628-5:2009 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals
ISO 10423:2009 Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment
ISO 10426-1:2009 Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification
ISO 21610:2009 Corrosion of metals and alloys - Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels
ISO 2531:2009 Ductile iron pipes, fittings, accessories and their joints for water applications
IWA 8:2009 Tableware, giftware, jewellery, luminaries - Glass clarity - Classification and test method
ISO 6721-12:2009 Plastics - Determination of dynamic mechanical properties - Part 12: Compressive vibration - Non-resonance method
ISO 29681:2009 Paper, board and pulps - Determination of pH of salted water extracts
ISO 28199-1/Cor1:2009 Corrigendum
ISO 10456/Cor1:2009 Thermal insulation - Building materials and products - Determination of declared and design thermal values - Corrigendum 1
ISO 22199:2009 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission
ISO/IEC 29141:2009 Information technology - Biometrics - Tenprint capture using biometric application programming interface (BioAPI)
ISO/IEC 7810/Amd1:2009 Identification cards - Physical characteristics - Amendment 1: Criteria for cards containing integrated circuits
ISO/IEC 15408-1:2009 Information technology - Security techniques - Evaluation criteria for IT security - Part 1: Introduction and general model
ISO/IEC 14763-3/Amd1:2009 Information technology - Implementation and operation of customer premises cabling - Part 3: Testing of optical fibre cabling - Amendment 1
ISO/IEC 14776-326/Cor1:2009 Corrigendum
ISO/IEC 24739-2:2009 Information technology - AT Attachment with Packet Interface - 7 - Part 2: Parallel transport protocols and physical interconnect (ATA/ATAPI-7)
ISO/IEC 12785-1:2009 Information technology - Learning, education, and training - Content packaging - Part 1: Information model
ISO/IEC 14165-321:2009 Information technology - Fibre Channel - Part 321: Audio-Video (FC-AV)
ISO/IEC 14496-4/Amd37:2009 Conformance testing for MPEG-4 - Amendment 3: Additional file format conformance
ISO/IEC TR 29163-2:2009 Information technology - Sharable Content Object Reference Model (SCORMr) 2004 3rd Edition - Part 2: Content Aggregation Model Version 1.1
ISO/IEC TR 29163-3:2009 Information technology - Sharable Content Object Reference Model (SCORMr) 2004 3rd Edition - Part 3: Run-Time Environment Version 1.1
ISO/IEC TR 29163-4:2009 Information technology - Sharable Content Object Reference Model (SCORMr) 2004 3rd Edition - Part 4: Sequencing and Navigation Version 1.1
ISO/IEC 24786:2009 Information technology - User interfaces - Accessible user interface for accessibility settings
ISO/IEC 16326:2009 Systems and software engineering - Life cycle processes - Project management
ISO/IEC 27004:2009 Information technology - Security techniques - Information security management - Measurement
ISO/IEC 13888-3:2009 Information technology - Security techniques - Non-repudiation - Part 3: Mechanisms using asymmetric techniques
ISO/IEC 15946-5:2009 Information technology - Security techniques - Cryptographic techniques based on elliptic curves - Part 5: Elliptic curve generation
ISO/IEC 9798-5:2009 Information technology - Security techniques - Entity authentication - Part 5: Mechanisms using zero-knowledge techniques
ISO/IEC 23001-4:2009 Information technology - MPEG systems technologies - Part 4: Codec configuration representation
ISO/IEC TR 24766:2009 Information technology - Systems and software engineering - Guide for requirements engineering tool capabilities
ISO/IEC 19757-7:2009 Information technology - Document Schema Definition Languages (DSDL) - Part 7: Character Repertoire Description Language (CREPDL)
ISO/IEC 27033-1:2009 Information technology - Security techniques - Network security - Part 1: Overview and concepts
ISO/IEC 15444-1/Amd2:2009 Codestream restrictions - Amendment 2: Extended profiles for cinema and video production and archival applications
Update & Latest for ISO Standards
Page -1 -2
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
