Update & Latest for ISO Standards
Page -1 -2 - 3- 4 -5 -6 -7
ISO/IEC 14496-5/Amd25:2009 Reference software for MPEG-4 - Amendment 2: Reference software for scene partitioning
ISO/IEC 13818-1/Cor2:2009 Information technology - Generic coding of moving pictures and associated audio information: Systems - Corrigendum
ISO 7135:2009 Earth-moving machinery - Hydraulic excavators - Terminology and commercial specifications
ISO 1942:2009 Dentistry - Vocabulary
ISO 12620:2009 Terminology and other language and content resources - Specification of data categories and management of a Data Category Registry for language resources
ISO/TR 23605:2009 Technical product specification (TPS) - Application guidance - International model for national implementation
ISO 8000-102:2009 Data quality - Part 102: Master data: Exchange of characteristic data: Vocabulary
ISO 22006:2009 Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production
ISO 18113-4:2009 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 4: In vitro diagnostic reagents for self-testing
ISO 20906:2009 Acoustics - Unattended monitoring of aircraft sound in the vicinity of airports
ISO 27894:2009 Vacuum technology - Vacuum gauges - Specifications for hot cathode ionization gauges
ISO 2314:2009 Gas turbines - Acceptance tests
ISO/TR 12309:2009 Health informatics - Guidelines for terminology development organizations
ISO/TR 22957:2009 Document management - Analysis, selection and implementation of electronic document management systems (EDMS)
ISO 28741/Cor1:2009 Corrigendum
ISO/TS 22239-1:2009 Road vehicles - Child seat presence and orientation detection system (CPOD) - Part 1: Specifications and test methods
ISO 8789:2009 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification
ISO/TS 22239-2:2009 Road vehicles - Child seat presence and orientation detection system (CPOD) - Part 2: Resonator specification
ISO/TS 22239-3:2009 Road vehicles - Child seat presence and orientation detection system (CPOD) - Part 3: Labelling
ISO 4254-10:2009 Agricultural machinery - Safety - Part 10: Rotary tedders and rakes
ISO 24333:2009 Cereals and cereal products - Sampling
ISO/TS 22002-1:2009 Prerequisite programmes on food safety - Part 1: Food manufacturing
ISO 19901-6:2009 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 6: Marine operations
ISO 2930:2009 Rubber, raw natural - Determination of plasticity retention index (PRI)
ISO 29804:2009 Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material
ISO/IEC TR 29163-1:2009 Information technology - Sharable Content Object Reference Model (SCORMr) 2004 3rd Edition - Part 1: Overview Version 1.1
ISO/IEC 15420:2009 Information technology - Automatic identification and data capture techniques - EAN/UPC bar code symbology specification
ISO/IEC 18014-3:2009 Information technology - Security techniques - Time-stamping services - Part 3: Mechanisms producing linked tokens
ISO/IEC 18014-2:2009 Information technology - Security techniques - Time-stamping services - Part 2: Mechanisms producing independent tokens
ISO/IEC 14776-453:2009 Information technology - Small computer system interface (SCSI) - Part 453: Primary commands-3 (SPC-3)
ISO/IEC 18033-4/Amd1:2009 - Amendment 1: Rabbit and Decim
ISO/IEC 14496-16:2009 Information technology - Coding of audio-visual objects - Part 16: Animation Framework eXtension (AFX)
ISO/IEC 14496-3/Cor1:2009 Information technology - Coding of audio-visual objects - Part 3: Audio - Corrigendum
ISO/IEC 8825-5:2008 Information technology - ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 ISO/IEC 8825-4:2008 Information technology - ASN.1 encoding rules: XML Encoding Rules (XER) ISO/IEC 8825-3:2008 Information technology - ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) ISO/IEC 8825-2:2008 Information technology - ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) ISO/IEC 8825-1:2008 Information technology - ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) ISO/IEC 8824-1:2008 Information technology - Abstract Syntax Notation One (ASN.1): Specification of basic notation ISO/IEC 8824-2:2008 Information technology - Abstract Syntax Notation One (ASN.1): Information object specification ISO/IEC 8824-3:2008 Information technology - Abstract Syntax Notation One (ASN.1): Constraint specification ISO/IEC 8824-4:2008 Information technology - Abstract Syntax Notation One (ASN.1): Parameterization of ASN.1 specifications
ISO 2076:2010 Textiles - Man-made fibres - Generic names
ISO 15223-2:2010 Medical devices - Symbols to be used with medical device labels, labelling, and information to be supplied - Part 2: Symbol development, selection and validation
ISO 15752:2010 Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety
ISO 10936-2:2010 Optics and photonics - Operation microscopes - Part 2: Light hazard from operation microscopes used in ocular surgery
ISO 7396-1/Amd1:2010 - Amendment 1: Requirements for terminal units for vacuum fitted on medical supply units with operator-adjustable portions and connected to the pipeline through flexible hoses
ISO 15798:2010 Ophthalmic implants - Ophthalmic viscosurgical devices
ISO 6182-12:2010 Fire protection - Automatic sprinkler systems - Part 12: Requirements and test methods for grooved-end components for steel pipe systems
ISO 17874-1:2010 Remote handling devices for radioactive materials - Part 1: General requirements
ISO/TR 9241-100:2010 Ergonomics of human-system interaction - Part 100: Introduction to standards related to software ergonomics
ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture
ISO 15242-2/Cor1:2010 Corrigendum
ISO 15242-3/Cor1:2010 Corrigendum
ISO 10961:2010 Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection
ISO 9539:2010 Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes
ISO 8729-1:2010 Ships and marine technology - Marine radar reflectors - Part 1: Passive type
ISO 16853:2010 Textile machinery - Sliver cans, rectangular - Main dimensions and tolerances
ISO 105-A01:2010 Textiles - Tests for colour fastness - Part A01: General principles of testing
ISO 22369-2:2010 Crop protection equipment - Drift classification of spraying equipment - Part 2: Classification of field crop sprayers by field measurements
ISO 13739:2010 Petroleum products - Procedures for transfer of bunkers to vessels
ISO 7507-4:2010 Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 4: Internal electro-optical distance-ranging method
ISO 10679:2010 Steel - Cast tool steel
ISO 12625-12:2010 Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency
ISO 29803:2010 Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS)
ISO 12968:2010 Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test)
ISO 3864 - Graphical Symbols Package Graphical Symbols - Safety Colours and Safety Signs Package
ISO 19719:2010 Machine tools - Work holding chucks - Vocabulary
ISO 31000 / ISO Guide 73 / ISO/IEC 31010 Risk Management Package ISO 31000 / ISO Guide 73 / ISO/IEC 31010 Risk Management Package
ISO 2859-Sampling Procedures for Inspection by Attributes Package ISO 2859-Sampling Procedures for Inspection by Attributes Package
ISO 5725-Accuracy of Measurement Methods and Results Package ISO 5725-Accuracy of Measurement Methods and Results Package
ISO/IEC 17043:2010 Conformity assessment - General requirements for proficiency testing
ISO/IEC 17025 and ISO 15189 Competence Testing and Calibration of Medical Laboratories Package ISO/IEC 17025 and ISO 15189 Competence Testing and Calibration of Medical Laboratories Package
ISO 11135 - Sterilization of Health Care Products Package ISO 11135 - Sterilization of Health Care Products Package (Ethylene Oxide process)
ISO 15752:2010 Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety
ISO 6474-1:2010 Implants for surgery - Ceramic materials - Part 1: Ceramic materials based on high purity alumina
ISO 14708-5:2010 Implants for surgery - Active implantable medical devices - Part 5: Circulatory support devices
ISO/DIS 23908-1 Sharps injury protection - Requirements and test methods - Part 1: Sharps protection features for single-used hypodermic needles, catheters, introducers for catheters and needles used for blood sampling
ISO 6182-12:2010 Fire protection - Automatic sprinkler systems - Part 12: Requirements and test methods for grooved-end components for steel pipe systems
ISO 17201-3:2010 Acoustics - Noise from shooting ranges - Part 3: Guidelines for sound propagation calculations
ISO 15242-2/Cor1:2010 Corrigendum
ISO 9539:2010 Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes
ISO/TR 21548:2010 Health informatics - Security requirements for archiving of electronic health records - Guidelines
ISO 7628:2010 Road vehicles - Thermoplastics tubing for air braking systems
ISO 8729-1:2010 Ships and marine technology - Marine radar reflectors - Part 1: Passive type
ISO 8566-1:2010 Cranes - Cabins and control stations - Part 1: General
ISO 16853:2010 Textile machinery - Sliver cans, rectangular - Main dimensions and tolerances
ISO 29981:2010 Milk products - Enumeration of presumptive bifidobacteria - Colony count technique at 37 degrees C
ISO 14715:2010 Oil of thyme containing thymol, Spanish type Thymus zygis (Loefl.) L.
ISO 13739:2010 Petroleum products - Procedures for transfer of bunkers to vessels
ISO 10679:2010 Steel - Cast tool steel
ISO 12625-12:2010 Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency
ISO 16409/Amd1:2010 Dentistry - Oral hygiene products - Manual interdental brushes - Amendment 1
ISO/IEC 17000 / 17011 / 17021 Conformity Assessment Package ISO/IEC 17000 / 17011 / 17021 Conformity Assessment Package
ISO Standards Handbook - Cranes Cranes
ISO/IEC 27000 Information Technology Security Techniques Collection ISO/IEC 27000 Information Technology Security Techniques Collection
ISO/IEC 23002-4:2010 Information technology - MPEG video technologies - Part 4: Video tool library
ISO/IEC 14496-27:2009 Information technology - Coding of audio-visual objects - Part 27: 3D Graphics conformance
ISO/IEC 24744/Amd1:2010 Software Engineering - Metamodel for Development Methodologies - Amendment 1: Notation
ISO/IEC 9594-2:2005/Cor2:2010 Information technology - Open Systems Interconnection - The Directory: Models - Corrigendum 2
ISO/IEC 12139-1/Cor1:2010 Information technology - Telecommunications and information exchange between systems - Powerline communication (PLC) - High speed PLC medium access control (MAC) and physical layer (PHY) - Part 1: General requirements - Corrigendum 1
ISO 28238:2010 Compression and injection moulds - Components for gating systems
ISO 22745-2:2010 Industrial automation systems and integration - Open technical dictionaries and their application to master data - Part 2: Vocabulary
ISO 15519-1:2010 Specification for diagrams for process industry - Part 1: General rules
ISO 10579:2010 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts
ISO/TS 13141:2010 Electronic fee collection - Localisation augmentation communication for autonomous systems
ISO 25112:2010 Intelligent transport systems - Communications access for land mobiles (CALM) - Mobile wireless broadband using IEEE 802.16
ISO 25113:2010 Intelligent transport systems - Communications access for land mobiles (CALM) - Mobile wireless broadband using HC-SDMA
ISO/TS 10272-3:2010 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method
ISO 28620:2010 Medical devices - Non-electrically driven portable infusion devices
ISO 10993-16:2010 Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables
ISO 7885:2010 Dentistry - Sterile injection needles for single use
ISO 14708-6:2010 Implants for surgery - Active implantable medical devices - Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators)
ISO/TR 7250-2:2010 Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from individual ISO populations
ISO 8995-1:2002 Lighting of work places - Part 1: Indoor
ISO 8995-1/Cor1:2005 Corrigendum
ISO 28077:2006 Photocarcinogenesis action spectrum (non-melanoma skin cancers)
ISO 8995-3:2006 Lighting of work places - Part 3: Lighting requirements for safety and security of outdoor work places
ISO 21072-3:2010 Ships and marine technology - Marine environment protection: performance testing of oil skimmers - Part 3: High viscosity oil
ISO 11161/Amd1:2010 Industrial automation systems - Safety of integrated manufacturing systems - Basic requirements - Amendment 1
ISO 7240-24:2010 Fire detection and fire alarm systems - Part 24: Sound-system loudspeakers
ISO 16312-1:2010 Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment - Part 1: Criteria
ISO 17166:1999 Erythema reference action spectrum and standard erythema dose
ISO 23539:2005 Photometry - The CIE system of physical photometry
ISO 23603:2005 Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour
ISO 11929:2010 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and application
ISO 15548-1/Cor1:2010 Corrigendum
ISO 1436/Cor1:2010 Rubber products - Hoses and hose assemblies - Wire reinforced hydraulic type - Corrigendum
ISO 10497:2010 Testing of valves - Fire type-testing requirements
ISO 11298-1:2010 Plastics piping systems for renovation of underground water supply networks - Part 1: General
ISO 11295:2010 Classification and information on design of plastics piping systems used for renovation
ISO 11298-3:2010 Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes
ISO 8779:2010 Plastics piping systems - Polyethylene (PE) pipes for irrigation - Specifications
ISO 4395/Cor1:2010 Fluid power systems and components - Cylinders - Piston rod thread dimensions and types - Corrigendum
ISO 7289:2010 Gas welding equipment - Quick-action couplings with shut-off valves for welding, cutting and allied processes
ISO 2135:2010 Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
ISO 10074:2010 Anodizing of aluminium and its alloys - Specification for hard anodic oxidation coatings on aluminium and its alloys
ISO 10911:2010 Solid hardmetal end mills with cylindrical shank - Dimensions
ISO 14341:2010 Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification
ISO 14344:2010 Welding consumables - Procurement of filler materials and fluxes
ISO 22745-1:2010 Industrial automation systems and integration - Open technical dictionaries and their application to master data - Part 1: Overview and fundamental principles
ISO 22745-11:2010 Industrial automation systems and integration - Open technical dictionaries and their application to master data - Part 11: Guidelines for the formulation of terminology
ISO 22745-20:2010 Industrial automation systems and integration - Open technical dictionaries and their application to master data - Part 20: Procedures for the maintenance of an open technical dictionary
ISO 17635:2010 Non-destructive testing of welds - General rules for metallic materials
ISO 23279:2010 Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds
ISO 26382:2010 Cogeneration systems - Technical declarations for planning, evaluation and procurement
ISO 8143:2010 Thermal insulation products for building equipment and industrial installations - Calcium silicate products
ISO/TS 21547:2010 Health informatics - Security requirements for archiving of electronic health records - Principles
ISO 13606-5:2010 Health informatics - Electronic health record communication - Part 5: Interface specification
ISO 12643-4:2010 Graphic technology - Safety requirements for graphic technology equipment and systems - Part 4: Converting equipment and systems
ISO 7117:2010 Motorcycles - Measurement method for determining maximum speed
ISO 12214:2010 Road vehicles - Direction-of-motion stereotypes for automotive hand controls
ISO 10605/Cor1:2010 Corrigendum
ISO 15370:2010 Ships and marine technology - Low-location lighting (LLL) on passenger ships - Arrangement
ISO 27025:2010 Space systems - Programme management - Quality assurance requirements
ISO 27875:2010 Space systems - Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages
ISO/TR 29944:2010 Powered industrial trucks and tractors - Brake performance - Determination of measurement procedures
ISO 17234-1:2010 Leather - Chemical tests for the determination of certain azo colorants in dyed leathers - Part 1: Determination of certain aromatic amines derived from azo colorants
ISO 105-C08:2010 Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
ISO 3175-1:2010 Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 1: Assessment of performance after cleaning and finishing
ISO 3175-2:2010 Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene
ISO 14419:2010 Textiles - Oil repellency - Hydrocarbon resistance test
ISO 22000 Food Safety Management Systems Package ISO 22000 Food Safety Management Systems Package
ISO 17678:2010 Milk and milk products - Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method)
ISO 27205:2010 Fermented milk products - Bacterial starter cultures - Standard of identity
ISO 29081:2010 Surface chemical analysis - Auger electron spectroscopy - Reporting of methods used for charge control and charge correction
ISO 16110-2:2010 Hydrogen generators using fuel processing technologies - Part 2: Test methods for performance
ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
ISO/TR 24475:2010 Cosmetics - Good Manufacturing Practices - General training document
ISO 3924:2010 Petroleum products - Determination of boiling range distribution - Gas chromatography method
ISO 26203-1:2010 Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems
ISO 26482:2010 Hardmetals - Determination of lead and cadmium content
ISO 17054:2010 Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique
ISO 25902-2:2010 Titanium pipes and tubes - Non-destructive testing - Part 2: Ultrasonic testing for the detection of longitudinal imperfections
ISO 945-1/Cor1:2010 Corrigendum
ISO/TR 12134:2010 Rubber - Estimation of uncertainty for test methods - Non-functional parameters
ISO 23794:2010 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
ISO 11339:2010 Adhesives - T-peel test for flexible-to-flexible bonded assemblies
ISO 2440/Amd1:2010 Polymeric materials, cellular flexible - Accelerated ageing tests - Amendment 1
ISO 25179:2010 Adhesives - Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
ISO 4251-4:2010 Tyres (ply rating marked series) and rims for agricultural tractors and machines - Part 4: Tyre classification and nomenclature
ISO 4898:2010 Rigid cellular plastics - Thermal insulation products for buildings - Specifications
ISO 10191:2010 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods
ISO 5351:2010 Pulps - Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
ISO 14436:2010 Pulps - Standard tap water for drainability measurements - Conductivity 40 mS/m to 150 mS/m
ISO 16053:2010 Paints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test
ISO 9117-2:2010 Paints and varnishes - Drying tests - Part 2: Pressure test for stackability
ISO 9117-3:2010 Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini
ISO 29581-2:2010 Cement - Test methods - Part 2: Chemical analysis by X-ray fluorescence
ISO/TR 12603:2010 Building construction machinery and equipment - Classification
ISO 10545-16:2010 Ceramic tiles - Part 16: Determination of small colour differences
ISO 16508:1999 Road traffic lights - Photometric properties of 200 mm roundel signals
ISO/IEC TR 18018:2010 Information technology - Systems and software engineering - Guide for configuration management tool capabilities
ISO/IEC 9594-2/Cor2:2010 Extensions to Support Paged Result on the DSP - Corrigendum
ISO/IEC 9798-2/Cor1:2010 Information technology - Security techniques - Entity authentication - Part 2: Mechanisms using symmetric encipherment algorithms - Corrigendum
ISO/IEC 14496-4/Cor7:2010 Conformance testing for MPEG-4 - Corrigendum
ISO/IEC 14662:2010 Information technology - Open-edi reference model
ISO/IEC 27003:2010 Information technology - Security techniques - Information security management system implementation guidance
ISO/IEC 14496-5/Amd14/Cor1:2010 Reference software for MPEG-4 - Amendment 1 - Corrigendum
ISO/IEC 14543-5-1:2010 Information technology - Home electronic system (HES) architecture - Part 5-1: Intelligent grouping and resource sharing for Class 2 and Class 3 - Core protocol
ISO/IEC 14165-133:2010 Information technology - Fibre Channel - Part 133: Switch Fabric-3 (FC-SW-3)
ISO/IEC 14543-5-22:2010 Information technology - Home electronic system (HES) architecture - Part 5-22: Intelligent grouping and resource sharing for HES Class 2 and Class 3 - Application profile - File profile
ISO/IEC 15938-12/Cor2:2010 Corrigendum
ISO/IEC 14496-5/Amd23:2010 Reference software for MPEG-4 - Amendment 2: Synthesized texture reference software
ISO/IEC 14496-20/Amd2:2010 - Amendment 2: Technology for scene adaptation
ISO 20795-2:2010 Dentistry - Base polymers - Part 2: Orthodontic base polymers
ISO 8536-2:2010 Infusion equipment for medical use - Part 2: Closures for infusion bottles
ISO 27427:2010 Anaesthetic and respiratory equipment - Nebulizing systems and components
ISO 2889:2010 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities
ISO 9241-210:2010 Ergonomics of human-system interaction - Part 210: Human-centred design for interactive systems
ISO 4866:2010 Mechanical vibration and shock - Vibration of fixed structures - Guidelines for the measurement of vibrations and evaluation of their effects on structures
ISO 12188-1:2010 Tractors and machinery for agriculture and forestry - Test procedures for positioning and guidance systems in agriculture - Part 1: Dynamic testing of satellite-based positioning devices
ISO 16992:2010 Passenger car tyres - Spare unit substitutive equipment (SUSE)
ISO 1825:2010 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification
ISO 6179:2010 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)
ISO 17078-1/Amd1:2010 Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels - Amendment 1
ISO 19334:2010 Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis
ISO 9211-1:2010 Optics and photonics - Optical coatings - Part 1: Definitions
ISO 6422-1:2010 Layout key for trade documents - Part 1: Paper-based documents
ISO 7967-5:2010 Reciprocating internal combustion engines - Vocabulary of components and systems - Part 5: Cooling systems
ISO 7967-9:2010 Reciprocating internal combustion engines - Vocabulary of components and systems - Part 9: Control and monitoring systems
ISO 28640:2010 Random variate generation methods
ISO 20795-2:2010 Dentistry - Base polymers - Part 2: Orthodontic base polymers
ISO 8536-2:2010 Infusion equipment for medical use - Part 2: Closures for infusion bottles
ISO 27427:2010 Anaesthetic and respiratory equipment - Nebulizing systems and components
ISO 27186:2010 Active implantable medical devices - Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements
ISO 2889:2010 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities
ISO 9241-210:2010 Ergonomics of human-system interaction - Part 210: Human-centred design for interactive systems
ISO 29042-5:2010 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet
ISO 29042-6:2010 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet
ISO 29042-7:2010 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Test bench method for the measurement of the pollutant concentration parameter
ISO 16972:2010 Respiratory protective devices - Terms, definitions, graphical symbols and units of measurement
ISO/TS 22939:2010 Soil quality - Measurement of enzyme activity patterns in soil samples using fluorogenic substrates in micro-well plates
ISO 29441:2010 Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection
ISO/PAS 3930:2010 Instruments for measuring vehicle exhaust emissions - Metrological and technical requirements; Metrological control and performance tests
ISO 4866:2010 Mechanical vibration and shock - Vibration of fixed structures - Guidelines for the measurement of vibrations and evaluation of their effects on structures
ISO 13229:2010 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value
ISO 10216:2010 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method
ISO 3580:2010 Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification
ISO 12188-1:2010 Tractors and machinery for agriculture and forestry - Test procedures for positioning and guidance systems in agriculture - Part 1: Dynamic testing of satellite-based positioning devices
ISO 9211-2:2010 Optics and photonics - Optical coatings - Part 2: Optical properties
ISO 16992:2010 Passenger car tyres - Spare unit substitutive equipment (SUSE)
ISO 16750-2:2010 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
ISO 17386:2010 Transport information and control systems - Manoeuvring Aids for Low Speed Operation (MALSO) - Performance requirements and test procedures
ISO 1825:2010 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification
ISO 12117-2/Cor1:2010 Corrigendum
ISO 6179:2010 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)
ISO 105-C06:2010 Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering
ISO 11058:2010 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load
ISO 4802-1:2010 Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Part 1: Determination by titration method and classification
ISO 4802-2:2010 Glassware - Hydrolytic resistance of the interior surfaces of glass containers - Part 2: Determination by flame spectrometry and classification
ISO 17078-1/Amd1:2010 Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels - Amendment 1
ISO 10426-1/Cor1:2010 Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification - Corrigendum
ISO 21809-5:2010 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings
ISO 4986:2010 Steel castings - Magnetic particle inspection
ISO 4987:2010 Steel castings - Liquid penetrant inspection
ISO 12123:2010 Optics and photonics - Specification of raw optical glass
ISO 5794-1:2010 Rubber compounding ingredients - Silica, precipitated, hydrated - Part 1: Non-rubber tests
ISO 4662/Cor1:2010 Rubber - Determination of rebound resilience of vulcanizates - Corrigendum
ISO 25337:2010 Plastics - Production quality control - Statistical method for using single measurements
ISO 4000-1:2010 Passenger car tyres and rims - Part 1: Tyres (metric series)
ISO 19334:2010 Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis
ISO 10545-6:2010 Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles
ISO/TR 12910:2010 Light-frame timber construction - Comparison of four national design documents
ISO/TR 25743:2010 Lifts (elevators) - Study of the use of lifts for evacuation during an emergency
ISO 15206:2010 Timber poles - Basic requirements and test methods
ISO 8124-3:2010 Safety of toys - Part 3: Migration of certain elements
ISO 8124-4:2010 Safety of toys - Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use
ISO/IEC 10373-6/Amd7:2010 Test methods for ePassport
ISO/IEC TR 15938-8/Amd5:2010 - Amendment 5: Extraction and matching of image signature tools
ISO/IEC TR 18047-2/Cor1:2010 Corrigendum
ISO/IEC 24730-5:2010 Information technology - Real-time locating systems (RTLS) - Part 5: Chirp spread spectrum (CSS) at 2,4 GHz air interface
ISO/IEC/IEEE 16326:2009 Systems and software engineering - Life cycle processes - Project management
ISO/IEC/IEEE 9945:2009 Information technology - Portable Operating System Interface (POSIXr) Base Specifications, Issue 7
ISO/IEC 24739-3:2010 Information technology - AT Attachment with Packet Interface - 7 - Part 3: Serial transport protocols and physical interconnect (ATA/ATAPI-7 V3)
ISO/IEC TR 29794-4:2010 Information technology - Biometric sample quality - Part 4: Finger image data
ISO/IEC TR 29794-5:2010 Information technology - Biometric sample quality - Part 5: Face image data
ISO/IEC 19794-2/Amd1:2010 - Amendment 1: Detailed description of finger minutiae location, direction, and type
ISO/IEC TR 19791:2010 Information technology - Security techniques - Security assessment of operational systems
ISO 9211-1:2010 Optics and photonics - Optical coatings - Part 1: Definitions
ISO 2146:2010 Information and documentation - Registry services for libraries and related organizations
ISO 21217:2010 Intelligent transport systems - Communications access for land mobiles (CALM) - Architecture
ISO/TR 11766:2010 Intelligent transport systems - Communications access for land mobiles (CALM) - Security considerations for lawful interception
ISO/TS 16949:2009S Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations Standard in Spanish
ISO/PAS 3930:2009 Instruments for measuring vehicle exhaust emissions - Metrological and technical requirements; Metrological control and performance tests
ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
ISO 10156:2010 Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
ISO/TS 29002-20:2010 Industrial automation systems and integration - Exchange of characteristic data - Part 20: Concept dictionary resolution services
ISO/TS 22745-40:2010 Industrial automation systems and integration - Open technical dictionaries and their application to master data - Part 40: Master data representation
ISO/TS 29002-6:2010 Industrial automation systems and integration - Exchange of characteristic data - Part 6: Concept dictionary terminology reference model
ISO/TS 22745-35:2010 Industrial automation systems and integration - Open technical dictionaries and their application to master data - Part 35: Query for characteristic data
ISO/TS 22745-14:2010 Industrial automation systems and integration - Open technical dictionaries and their application to master data - Part 14: Dictionary query interface
ISO/TS 22745-10:2010 Industrial automation systems and integration - Open technical dictionaries and their application to master data - Part 10: Dictionary representation
ISO 22840:2010 Intelligent transport systems - Devices to aid reverse manoeuvres - Extended-range backing aid systems (ERBA)
ISO 17078-4:2010 Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment
ISO/IEC TR 29107-1:2010 Information technology - Intelligent homes - Taxonomy of specifications - Part 1: The scheme
ISO/IEC 19785-1/Amd1:2010 - Amendment 1: Support for additional data elements
ISO/IEC 19785-2/Amd1:2010 - Amendment 1: Additional registrations
ISO/IEC 19785-3/Amd1:2010 - Amendment 1: Support for Additional Data Elements
ISO 15622:2010 Intelligent transport systems - Adaptive Cruise Control systems - Performance requirements and test procedures
ISO/TS 10004:2010 Quality management - Customer satisfaction - Guidelines for monitoring and measuring
ISO 10012 and ISO 19011 Environmental Management Measurement and Auditing Systems Package ISO 10012 and ISO 19011 Environmental Management Measurement and Auditing Systems Package
ISO 10012 and ISO/IEC 17025 Laboratories Measurement Management System Requirements Package ISO 10012 and ISO/IEC 17025 Laboratories Measurement Management System Requirements Package
ISO 10012 / ISO 9000 / ISO 9001 Quality Measurement Management Systems Package ISO 10012 / ISO 9000 / ISO 9001 Quality Measurement Management Systems Package
ISO 15747:2010 Plastic containers for intravenous injections
ISO/DIS 25539-3 Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters
ISO 9917-2:2010 Dentistry - Water-based cements - Part 2: Resin-modified cements
ISO 1135-4:2010 Transfusion equipment for medical use - Part 4: Transfusion sets for single use
ISO 14602:2010 Non-active surgical implants - Implants for osteosynthesis - Particular requirements
ISO 27108:2010 Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)
ISO 14122-4/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders - Amendment 1
ISO 14122-1/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels - Amendment 1
ISO 14122-2/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways - Amendment 1
ISO 14122-3/Amd1:2010 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails - Amendment 1
ISO 3500/Amd1:2010 Seamless steel CO2 cylinders for fixed fire-fighting installations on ships - Amendment 1
ISO 15769:2010 Hydrometry - Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods
ISO 286-1:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
ISO 898 - Mechanical Properties of Fasteners Package ISO 898 - Mechanical Properties of Fasteners Package
ISO 11237:2010 Rubber hoses and hose assemblies - Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
ISO 9809-1:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
ISO 9809-2:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa
ISO 9809-3:2010 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders
ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength
ISO 230 - Test Code for Machine Tools Package ISO 230 - Test Code for Machine Tools Package
ISO 10303-214:2010 Industrial automation systems and integration - Product data representation and exchange - Part 214: Application protocol: Core data for automotive mechanical design processes
ISO 13399-1/Amd1:2010 Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model - Amendment 1
ISO 18901:2010 Imaging materials - Processed silver-gelatin-type black-and-white films - Specifications for stability
ISO 16750-5:2010 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads
ISO 16750-4:2010 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads
ISO 8709:2010 Mopeds - Brakes and brake systems - Tests and measurement methods
ISO 8710:2010 Motorcycles - Brakes and brake systems - Tests and measurement methods
ISO 30002:2010 Ships and marine technology - Ship recycling management systems - Guidelines for selection of ship recyclers (and pro forma contract)
ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes
ISO 12956:2010 Geotextiles and geotextile-related products - Determination of the characteristic opening size
ISO 105-D01:2010 Textiles - Tests for colour fastness - Part D01: Colour fastness to drycleaning using perchloroethylene solvent
ISO 105-E01:2010 Textiles - Tests for colour fastness - Part E01: Colour fastness to water
ISO 105-E07:2010 Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water
ISO 105-E09:2010 Textiles - Tests for colour fastness - Part E09: Colour fastness to potting
ISO 105-E12:2010 Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling
ISO 105-E03:2010 Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water)
ISO 12958:2010 Geotextiles and geotextile-related products - Determination of water flow capacity in their plane
ISO 8573-1:2010 Compressed air - Part 1: Contaminants and purity classes
ISO Guide 30 / Guide 31 / Guide 32 / Guide 33 / Guide 34 / Guide 35 Reference Materials Package ISO Guide 30 / Guide 31 / Guide 32 / Guide 33 / Guide 34 / Guide 35 Reference Materials Package
ISO 22621-5:2010 Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) - Polyamide (PA) - Part 5: Fitness for purpose of the system
ISO 22621-6:2010 Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) - Polyamide (PA) - Part 6: Code of practice for design, handling and installation
ISO 3386-1/Amd1:2010 Flexible cellular materials - Determination of compression stress/strain characteristic and compression stress value - Part 1: Low density materials - Amendment 1
ISO 3386-2/Amd1:2010 Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Part 2: High density materials - Amendment 1
ISO 1628-3:2010 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes
ISO 11795/Amd1:2010 Agricultural tractor drive wheel tyres - Method of measuring tyre rolling circumference - Amendment 1
ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples
ISO 12344:2010 Thermal insulating products for building applications - Determination of bending behaviour
ISO/IEC 24792:2010 Information technology - Telecommunications and information exchange between systems - Multicast Session Management Protocol (MSMP)
ISO/IEC 13818 Information technology - Generic Coding of Moving Pictures and Audio Information Package (Parts 1 - 3) ISO/IEC 13818 Information technology - Generic Coding of Moving Pictures and Audio Information Package (Parts 1 - 3)
ISO/TS 80004-3:2010 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects
ISO 7010/Amd5:2010 Graphical symbols - Safety colours and safety signs - Safety signs used in workplaces and public areas - Amendment 5
ISO 24100:2010 Intelligent transport systems - Basic principles for personal data protection in probe vehicle information services
ISO 9173-2:2010 Dentistry - Extraction forceps - Part 2: Designation
ISO 15225:2010 Medical devices - Quality management - Medical device nomenclature data structure
ISO 13855:2010 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body
ISO/TR 23849:2010 Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery
ISO 1182:2010 Reaction to fire tests for products - Non-combustibility test
ISO 13472-2:2010 Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 2: Spot method for reflective surfaces
ISO/TS 14253-4:2010 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules
ISO 13254:2010 Thermoplastics piping systems for non-pressure applications - Test method for watertightness
ISO 13255:2010 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
ISO 13259:2010 Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints
ISO 13262:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
ISO 13265:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
ISO 13266:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading
ISO 13267:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance
ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
ISO/IEEE 11073-10408:2010 Health informatics - Point-of-care medical device communication - Part 10408: Device specialization - Thermometer
ISO/IEEE 11073-10415:2010 Health informatics - Point-of-care medical device communication - Part 10415: Device specialization - Weighing scale
ISO/IEEE 11073-10471:2010 Health informatics - Point-of-care medical device communication - Part 10471: Device specialization - Independant living activity hub
ISO/IEEE 11073-20601:2010 Health informatics - Point-of-care medical device communication - Part 20601: Application profile - Optimized exchange protocol
ISO/IEEE 11073-10404:2010 Health informatics - Personal health device communication - Part 10404: Device specialization - Pulse oximeter
ISO/IEEE 11073-10407:2010 Health informatics - Personal health device communication - Part 10407: Device specialization - Blood pressure monitor
ISO/IEEE 11073-10417:2010 Health informatics - Personal health device communication - Part 10417: Device specialization - Glucose meter
ISO 9815:2010 Road vehicles - Passenger-car and trailer combinations - Lateral stability test
ISO 17631/Amd1:2010 - Amendment 1: Requirements specific to high speed crafts
ISO 1833-24:2010 Textiles - Quantitative chemical analysis - Part 24: Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane)
ISO 10580:2010 Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions
ISO 20869:2010 Footwear - Test method for outsoles, insoles, linings and insocks - Water soluble content
ISO 12030:2010 Tobacco and tobacco products - Non-destructive determination of strips density variation ratio in case - Ionizing radiation method
ISO 12871:2010 Olive oils and olive-pomace oils - Determination of aliphatic alcohols content by capillary gas chromatography
ISO 12872:2010 Olive oils and olive-pomace oils - Determination of the 2-glyceryl monopalmitate content
ISO 12873:2010 Olive oils and olive-pomace oils - Determination of wax content by capillary gas chromatography
ISO 15472:2010 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
ISO 10298:2010 Determination of toxicity of a gas or gas mixture
ISO 12924:2010 Lubricants, industrial oils and related products (Class L) - Family X (Greases) - Specification
ISO 10679/Cor1:2010 Corrigendum
ISO 8894-1:2010 Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer)
ISO 8664/Amd1:2010 Agricultural tractor drive-wheel tyres - Service description (load index - speed symbol) marked tyres - Amendment 1
ISO 7867-2/Amd1:2010 Tyres and rims (metric series) for agricultural tractors and machines - Part 2: Service description and load ratings - Amendment 1: .
ISO 11093-5/Cor1:2010 Paper and board - Testing of cores - Part 5: Determination of characteristics of concentric rotation - Corrigendum
ISO 29481-1:2010 Building information modelling - Information delivery manual - Part 1: Methodology and format
ISO/IEC 24800-3:2010 Information technology - JPSearch - Part 3: Query format
ISO/IEC 11989:2010 Information technology - iSCSI Management API
ISO/IEC 14496-5/Amd15:2010 Reference software for MPEG-4 - Amendment 1: Reference software for Multiview Video Coding
ISO/IEC 29109-2:2010 Information technology - Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 - Part 2: Finger minutiae data
ISO/IEC 29109-4:2010 Information technology - Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 - Part 4: Finger image data
ISO/IEC 23000-6/Amd1:2010 - Amendment 1: Conformance and reference software for professional archival application format
ISO/IEC 15938-6/Amd3:2010 - Amendment 3: Reference software for image signature tools
ISO/IEC 14476-4:2010 Information technology - Enhanced communications transport protocol: Specification of QoS management for duplex multicast transport
ISO/IEC 24764:2010 Information technology - Generic cabling systems for data centres
ISO/IEC TR 20000-5:2010 Information technology - Service management - Part 5: Exemplar implementation plan for ISO/IEC 20000-1
ISO/IEC 14496-4/Amd38:2010 Conformance testing for MPEG-4 - Amendment 3: Conformance testing for Multiview Video Coding
ISO/IEC 13157-1:2010 Information technology - Telecommunications and information exchange between systems - NFC Security - Part 1: NFC-SEC NFCIP-1 security services and protocol
ISO/IEC 13157-2:2010 Information technology - Telecommunications and information exchange between systems - NFC Security - - Part 2: NFC-SEC cryptography standard using ECDH and AES
ISO/IEC 14476-6:2010 Information technology - Enhanced communications transport protocol: Specification of QoS management for n-plex multicast transport
ISO/IEC 11801/Amd2:2010 Information technology - Generic cabling for customer premises - Amendment 2
ISO/IEC 13818-2/Amd3:2010 Information technology - Generic coding of moving pictures and associated audio information: Video - Amendment 3: New level for 1080@50p/60p
ISO 17893/Amd1:2010 Steel wire ropes - Vocabulary, designation and classification - Amendment 1
ISO 13091-1/Amd1:2010 Mechanical vibration - Vibrotactile perception thresholds for the assessment of nerve dysfunction - Part 1: Methods of measurement at the fingertips - Amendment 1
ISO 10052/Amd1:2010 Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method - Amendment 1
ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 11363-1:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications
ISO 11363-2:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges
ISO 23125:2010 Machine tools - Safety - Turning machines
ISO 13674-1:2010 Road vehicles - Test method for the quantification of on-centre handling - Part 1: Weave test
ISO/IEC 29133:2010 Information technology - Automatic identification and data capture techniques - Quality test specification for rewritable hybrid media data carriers
ISO/IEC 14496-20/Amd3:2010 - Amendment 3: Presentation and Modification of Structured Information (PMSI)
ISO/IEC 10373-2/Cor1:2010 Identification cards - Test methods - Part 2: Cards with magnetic stripes - Corrigendum
ISO/IEC 29500-1/Cor1:2010 Corrigendum
ISO/IEC 29500-2/Cor1:2010 Corrigendum
ISO/IEC 29500-4/Cor1:2010 Corrigendum
ISO 7240-20:2010 Fire detection and alarm systems - Part 20: Aspirating smoke detectors
ISO 7240-25:2010 Fire detection and fire alarm systems - Part 25: Components using radio transmission paths
ISO 21927-3/Amd1:2010 Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators - Amendment 1
ISO 21927-2/Amd1:2010 Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators - Amendment 1
ISO 27407:2010 Hydraulic fluid power - Marking of performance characteristics on hydraulic filters
ISO 5597:2010 Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
ISO 4513:2010 Road vehicles - Visibility - Method for establishment of eyellipses for drivers eye location
ISO 11639:2010 Aerospace - Part numbering for hose assemblies
ISO 16368:2010 Mobile elevating work platforms - Design, calculations, safety requirements and test methods
ISO 7752-3:2010 Cranes - Control layout and characteristics - Part 3: Tower cranes
ISO 7752-1:2010 Cranes - Control layout and characteristics - Part 1: General principles
ISO 11784/Amd2:2010 Agricultural equipment - Animal electronic identification - Code structure - Amendment 2: Indication of an advanced transponder
ISO 12315:2010 Aluminium oxide primarily used for production of aluminium - Method for calculating the Al2O3 content of smelter-grade alumina
ISO 26142:2010 Hydrogen detection apparatus - Stationary applications
ISO 10307-2/Cor1:2010 Petroleum products - Total sediment in residual fuel oils - Part 2: Determination using standard procedures for ageing - Corrigendum
ISO 28641:2010 Rubber compounding ingredients - Organic chemicals - General test methods
ISO 4190-1:2010 Lift (Elevator) installation - Part 1: Class I, II, III and VI lifts
ISO 22389-1:2010 Timber structures - Bending strength of I-beams - Part 1: Testing, evaluation and characterization
ISO/IEC 15421:2010 Information technology - Automatic identification and data capture techniques - Bar code master test specifications
ISO/IEC 14496-26:2010 Information technology - Coding of audio-visual objects - Part 26: Audio conformance
ISO/IEC 18051:2010 Information technology - Telecommunications and information exchange between systems - Services for Computer Supported Telecommunications Applications (CSTA) Phase III
ISO/IEC 18056:2010 Information technology - Telecommunications and information exchange between systems - XML protocol for Computer Supported Telecommunications Applications (CSTA) Phase III
ISO/IEC 29500-3/Cor1:2010 Corrigendum
ISO 11323:2010 Iron ore and direct reduced iron - Vocabulary
ISO 15001:2010 Anaesthetic and respiratory equipment - Compatibility with oxygen
ISO 28319:2010 Dentistry - Laser welding
ISO 11953:2010 Dentistry - Implants - Clinical performance of hand torque instruments
ISO 10342:2010 Ophthalmic instruments - Eye refractometers
ISO 12867:2010 Ophthalmic instruments - Trial frames
ISO 12402-2/Amd1:2010 Personal flotation devices - Part 2: Lifejackets, performance level 275 - Safety requirements - Amendment 1
Update & Latest for ISO Standards
Page -1 -2 - 3- 4 -5 -6 -7
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
