SAE Standards : SAE – Aerospace Materials Specifications (AMS)
>> Page 1 2 3 4 5 6 7 
SAE – Aerospace Materials Specifications (AMS)
SAE AMS-H-6875A
Heat Treatment of Steel Raw Materials-Should Be Used Instead of MIL-H-6875, Which Was Cancelled on 2 February 1999
SAE AMS 2700B
Passivation of Corrosion Resistant Steels
SAE AMS-QQ-S-763B
Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings
SAE AMS 5643Q
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardenable-UNS S17400
SAE AMS-QQ-P-416B
Plating, Cadmium (Electrodeposited)
SAE AMS 2770H
Heat Treatment of Wrought Aluminum Alloy Parts
SAE AMS 5659L
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30CB (Nb) - 3.5Cu Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable (Composition similar to UNS S15500)
SAE AMS-QQ-A-250/11
Aluminum Alloy 6061, Plate and Sheet-UNS A96061
SAE AMS-DTL-23053/5
Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Flexible, Crosslinked-FSC 5970; Should Be Used Instead of MIL-DTL-23053/5C, Which Was Cancelled on 16 September 1999
SAE AMS-DTL-23053
Insulation Sleeving, Electrical, Heat Shrinkable, General Specification for-FSC 5970; Should Be Used Instead of MIL-DTL-23053E, Which Was Cancelled on 16 September 1999
SAE AMS-QQ-A-250A
Aluminum and Aluminum Alloy, Plate and Sheet General Specification for
SAE AMS 4928R
Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed-UNS R56400
SAE AMS 5662M
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 Degrees F (968 Degrees C) Solution Heat Treated, Precipitation Hardenable-UNS N07718
SAE AMS 2759/3D
Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
SAE AMS 4911L
Titanium Alloy, Sheet, Strip, and Plate 6AI - 4V Annealed-UNS R56400
SAE AMS 5731L
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1800 °F (982 °C) Solution Heat Treated-UNS S66286
SAE AMS-S-8802B
Sealing Compound, Temperature Resistant, Integral Fuel Tanks and Fuel Cell Cavities, High Adhesion
SAE AMS-QQ-A-250/12
Aluminum Alloy 7075, Plate and Sheet-A97075
SAE AMS 2750D
(R) Pyrometry
SAE AMS 5510R
Steel, Corrosion and Heat Resistant, Sheet, Strip and Plate 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated-UNS S32100
SAE AMS 2759/1D
Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)
SAE AMS 5737P
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1650 Degrees F (899 Degrees C) Solution and Precipitation Heat Treated-UNS S66286
SAE AMS 2175
Castings, Classification and Inspection of-Superseding AMS-STD-2175
SAE AMS-QQ-A-200/11
Aluminum Alloy 7075, Bar, Rod, Shapes, Tube, and Wire, Extruded-UNS A97075
SAE AMS-S-6758A
Steel, Chrome-Molybdenum (4130) Bars and Reforging Stock (Aircraft Quality)
SAE AMS 7276G
Rings, Sealing, Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 70 to 80
SAE AMS 5629E
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable-UNS S13800
SAE AMS-QQ-A-200/8
Aluminum Alloy 6061, Bar, Rod, Shapes, Tube, and Wire, Extruded-UNS A96061
SAE AMS-QQ-C-320B
Chromium Plating (Electrodeposited)
SAE AMS-STD-2154
Inspection, Ultrasonic, Wrought Metals, Process for
SAE AMS-QQ-A-250/4A
Aluminum Alloy 2024, Plate and Sheet-UNS A92024
SAE AMS 6415S
Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340)-UNS G43406
SAE AMS 6414K
Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Vacuum Consumable Electrode Remelted-UNS G43406
SAE AMS 2404E
Plating, Electroless Nickel
SAE AMS-QQ-N-290A
Nickel Plating (Electrodeposited)
SAE AMS 4050H
Aluminum Alloy, Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451) Solution Heat Treated, Stress Relieved, and Overaged-UNS A97050
SAE AMS-QQ-A-250/5A
Aluminum Alloy Alclad 2024, Plate and Sheet-UNS A82024
SAE AMS 2772E
Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS-DTL-22499
Shim Stock, Laminated
SAE AMS-C-26074B
Electroless Nickel Coatings
SAE AMS 5732J
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1800 Degrees F (982 Degrees C) Solution and Precipitation Heat Treated-UNS S66286
SAE AMS-S-5000A
Steel, Chrome-Nickel-Molybdenum (E4340) Bars and Reforging Stock
SAE AMS 2658B
Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts-: 2006
SAE AMS 6322N
Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740)-UNS G87400
SAE AMS-S-13165A
Shot Peening of Metal Parts
SAE AMS 2759D
Heat Treatment of Steel Parts General Requirements
SAE AMS-W-6858B
Welding, Resistance: Spot and Seam
SAE AMS 4640G
Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50)-Composition similar to UNS C63000
SAE AMS 2430M
(R) Shot Peening, Automatic
SAE AMS-A-21180A
Aluminum-Alloy Castings, High Strength AREA MECA-Superseding AMS 3894/2A
SAE AMS 5596K
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated-UNS N07718
SAE AMS 2644E
Inspection Material, Penetrant
SAE AMS 5599G
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7 Cb (Nb) Solution Heat Treated-UNS N06625
SAE AMS 5513H
Steel, Corrosion Resistant, Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Solution Heat Treated-UNS S30400
SAE AMS-QQ-A-225/8A
Aluminum Alloy 6061, Bar, Rod, and Wire, and Special Shapes; Rolled, Drawn, or Cold Finished-A96061
SAE AMS-QQ-A-225/9
Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished
SAE AMS 5663M
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 Degrees F (968 Degrees C) Solution and Precipitation Heat Treated-UNS N07718
SAE AMS 5604E
Steel, Corrosion Resistant, Sheet, Strip, and Plate 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb Solution Heat Treated, Precipitation Hardenable-UNS S17400
SAE AMS 5528H
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 17Cr - 7.1Ni - 1.1Al Solution Heat Treated, Precipitation Hardenable
SAE AMS-QQ-A-225/6A
Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished-A92024
SAE AMS-A-22771A
Aluminum Alloy Forgings, Heat Treated
SAE AMS-QQ-A-367A
Aluminum Alloy Forgings
SAE AMS-P-83461
Packing, Preformed, Petroleum Hydralic Fluid Resistant, Improved Performance at 275 Degrees F (135 Degrees C)
SAE AMS-WW-T-700/6A
Tube, Aluminum Alloy, Drawn, Seamless, 6061
SAE AMS 5678F
Steel, Corrosion Resistant, Wire 17Cr - 7.1Ni - 1.1Al Cold Drawn, Precipitation-Hardenable-UNS S17700
SAE AMS-QQ-A-200B
Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes, Tube, and Wire, Extruded: General Specification for
SAE AMS 6350K
Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)-UNS G41300
SAE AMS 5640U
Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9.0Ni Free Machining-UNS S30300 (Type 1); UNS S30323 (Type 2); UNS S30310 (Type 3)
SAE AMS-P-83461/1A
Packing, Preformed, Petroleum Hydraulic Fluid Resistant Improved Performance at 275°F (135°C) Sizes and Tolerances
SAE AMS-QQ-A-250/13
Aluminum Alloy Alclad 7075, Plate and Sheet
SAE AMS 5666F
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, Extrusions, and Rings 62Ni - 21.5Cr - 9.0Mo - 3.65 (Cb+Ta) Annealed-UNS N06625
SAE AMS 5639H
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 19Cr - 10Ni Solution Heat Treated-UNS S30400
SAE AMS-QQ-A-200/3
Aluminum Alloy 2024, Bar, Rod, Shapes, Tube, and Wire, Extruded-UNS A92024
SAE AMS 5646M
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11 Ni - 0.60Cb (SAE 30347) Solution Heat Treated-UNS S34700
SAE AMS 6345B
Steel, Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Otherwise Heat Treated-UNS G41300
SAE AMS 5525J
Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 °F (982 °C) Solution Heat Treated-UNS S66286
SAE AMS-C-9084
Cloth, Glass, Finished, for Resin Laminates-FSC 8305; Should Be Used Instead of MIL-C-9084C, Which Was Cancelled on 10 September 1999
SAE AMS 2403L
Plating, Nickel General Purpose
SAE AMS 5536M
Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated-UNS N06002
SAE AMS 2242F
Tolerances Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and Plate
SAE AMS 2759/2D
Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher
SAE AMS 3216G
Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set 70 to 80
SAE AMS-H-81200A
Heat Treatment of Titanium and Titanium Alloys-Replaces MIL-H-81200
SAE AMS 5516P
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated-UNS S30200
SAE AMS-R-83485
Rubber, Fluorocarbon Elastomer, Improved Performance at Low Temperatures
SAE AMS-QQ-A-250/8B
Aluminum Alloy 5052, Plate and Sheet-UNS A95052
SAE AMS-QQ-A-225B
Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; General Specification For
SAE AMS-R-83485/1
Rubber, Fluorocarbon Elastomer, Improved Performance at Low Temperatures, O-Rings, Sizes and Tolerances-FSC 5330
SAE AMS 5613R
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 12.5Cr (SAE 51410) Annealed-UNS S41000
SAE AMS 2771C
Heat Treatment of Aluminum Alloy Castings
SAE AMS 6265M
Steel, Bars, Forgings, and Tubing 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (SAE 9310) Vacuum Consumable Electrode Remelted-UNS G93106
SAE AMS 2406L
Plating, Chromium Hard Deposit
SAE AMS 5645P
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 10Ni - 0.40Ti (SAE 30321) Solution Heat Treated-UNS S32100
SAE AMS-QQ-A-250/1A
Aluminum 1100, Plate and Sheet-UNS A91100
SAE AMS 4027M
(R) Aluminum Alloy, Sheet and Plate 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated-UNS A96061
SAE AMS-R-83248/1
Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, and Compression Set Resistant (O-Rings, Class 1, 75 Hardness)
SAE AMS 6382M
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed-UNS G41400
SAE AMS 5557J
Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated-UNS S32100
SAE AMS-DTL-23053/8
Insulation Sleeving, Electrical, Heat Shrinkable, Polyvinylidene Fluoride, Semi-Rigid, Crosslinked-FSC 5970; Should Be Used Instead of MIL-DTL-23053/8C, Which Was Cancelled on 16 September 1999
SAE AMS 5517L
Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 125 ksi (862 MPa) Tensile Strength-UNS S30100
SAE AMS-T-6736B
Tubing, Chrome-Molybdenum (4130 or 8630) Steel, Seamless and Welded
SAE AMS 2759/9C
(R) Hydrogen Embrittlement Relief (Baking) of Steel Parts
SAE AMS-DTL-23053/4
Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Dual-Wall, Outer Wall Crosslinked-FSC 5970; Should Be Used Instead of MIL-DTL-23053/4D, Which Was Cancelled on 16 September 1999
SAE AMS 2759/5D
Heat Treatment Martensitic Corrosion-Resistant Steel Parts
SAE AMS 5630J
Steel, Corrosion Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C)
SAE AMS 5355H
Steel, Corrosion Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated-UNS J92200
SAE AMS 5512L
Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 18Cr - 10.5Ni - 0.80Cb (SAE 30347) Solution Heat Treated-UNS S34700
SAE AMS 5518K
Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 150 ksi (1034 MPa) Tensile Strength-UNS S30100
SAE AMS 2488D
(R) Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher
SAE AMS 2418G
Plating, Copper
SAE AMS 7259D
Rings, Sealing, Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95
SAE AMS 2424E
Plating, Nickel Low-Stressed Deposit
SAE AMS 2410J
Plating, Silver Nickel Strike, High Bake
SAE AMS 10134A
Angle - Unequal Leg Extruded-FSC 9540
SAE AMS-STD-66A
Steel: Chemical Composition and Hardenability
SAE AMS 2417G
Plating, Zinc-Nickel Alloy
SAE AMS 5862H
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu Consumable Electrode Remelted, Solution Heat Treated Precipitation-Hardenable-UNS S15500
SAE AMS 2774A
Heat Treatment Wrought Nickel Alloy and Cobalt Alloy Parts
SAE AMS 4901P
Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa)-UNS R50700
SAE AMS 10133A
Angle - Equal Leg Extruded-FSC 9540
SAE AMS 4967J
Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable-UNS R56400
SAE AMS 2759/6B
Gas Nitriding and Heat Treatment of Low-Alloy Steel Parts
SAE AMS-WW-T-700A
Tube, Aluminum and Aluminum Alloy, Drawn, Seamless, General Specification for
SAE AMS 3276D
(R) Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use to 360 Degrees F (182 Degrees C)
SAE AMS 2470M
Anodic Treatment of Aluminum Alloys Chromic Acid Process
SAE AMS-M-3171
Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on
SAE AMS 3277D
Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 400 °F (204 °C)
SAE AMS 5383E
Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.60Al - 18Fe Vacuum Melted Homogenization and Solution Heat Treated-UNS N07718
SAE AMS 4117H
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire and Flash Welded Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6, -T651) Solution and Precipitation Heat Treated-UNS A96061
SAE AMS 4218H
Aluminum Alloy Castings 7.0Si - 0.35Mg (A356.0-T6P) (Formerly T61P Temper) Solution and Precipitation Heat Treated-UNS A13560
SAE AMS 6440P
Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 - 1.05C) (SAE 52100) For Bearing Applications-UNS G52986
SAE AMS 2473G
Chemical Film Treatment for Aluminum Alloys General Purpose Coating
SAE AMS 2759/4B
Heat Treatment Austenitic Corrosion-Resistant Steel Parts
SAE AMS-P-5315A
(R) Butadiene - Acrylonitrile (NBR) Rubber for Fuel-Resistant Seals 60 to 70
SAE AMS-F-7190A
Forging, Steel, for Aircraft/Aerospace Equipment and Special Ordnance Applications
SAE AMS 5561G
Steel, Corrosion and Heat-Resistant, Welded and Drawn or Seamless and Drawn Tubing 9.0Mn - 20Cr - 6.5Ni - 0.28N High-Pressure Hydraulic-UNS S21900
SAE AMS 2423D
(R) Plating, Nickel Hard Deposit
SAE AMS 2675G
Brazing, Nickel Alloy Filler Metal
SAE AMS-C-27725C
Coating, Corrosion Preventative, for Aircraft Integral Fuel Tanks for Use to 250 °F (121 °C)
SAE AMS 2471F
Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Undyed Coating
SAE AMS 4945C
Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved-UNS R56320
SAE AMS 4215G
(R) Aluminum Alloy, Castings 5.0Si - 1.2Cu - 0.50Mg (C355.0-T6) Solution and Precipitation Heat Treated-UNS A33550
SAE AMS 2801B
Heat Treatment of Titanium Alloy Parts
SAE AMS-T-7081A
Tube, Aluminum Alloy, Seamless, Round, Drawn, 6061, Aircraft Hydraulic Quality
SAE AMS 5581E
Nickel Alloy, Corrosion and Heat-Resistant, Seamless or Welded Tubing 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) Annealed-UNS N06625
SAE AMS 6349C
Steel Bars 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Normalized-UNS G41400
SAE AMS 2759/7A
Carburizing and Heat Treatment of Carburizing Grade Steel Parts
SAE AMS 4219E
Aluminum Alloy Castings 7.0Si - 0.55Mg - 0.12Ti - 0.06Be (A357.0 T61P) Solution and Precipitation Heat Treated-UNS A13570
SAE AMS 5504M
Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 12.5Cr (SAE 51410) Annealed-UNS S41000
SAE AMS 6359H
Steel, Sheet, Strip, and Plate 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340)-UNS G43406
SAE AMS 5647H
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, And Rings 19Cr - 9.5Ni Solution Heat Treated-UNS S30403
SAE AMS-DTL-22499/1A
Shim Stock, Laminated, Aluminum Alloy-FSC 9535
SAE AMS 4965J
Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0AI - 4.0V Solution Heat Treated and Aged-UNS R56400
SAE AMS 4777G
Nickel Alloy, Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 to 1830 °F (971 to 999 °C) Solidus-Liquidus Range-UNS N99620
SAE AMS-DTL-23053/12
Insulation Sleeving, Electrical, Heat Shrinkable, Polytetrafluoroethylene-FSC 5970; Should Be Used Instead of MIL-DTL-23053/12C, Which Was Cancelled on 16 September 1999
SAE AMS 6484C
Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Normalized and Tempered
SAE AMS-WW-T-700/3A
Tube, Aluminum Alloy, Drawn, Seamless, 2024
SAE AMS 2400W
Plating, Cadmium
SAE AMS 2241R
Tolerances, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire
SAE AMS 2411F
Plating, Silver for High Temperature Applications
SAE AMS 6931A
Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Annealed-UNS R56400
SAE AMS 5754M
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated-UNS N06002
SAE AMS 4260F
(R) Aluminum Alloy, Investment Castings 7.0Si - 0.32Mg (356.0- T6) Solution and Precipitation Heat Treated-UNS A03560
SAE AMS 2817E
Packaging and Identification Preformed Packings
SAE AMS 3281C
(R) Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.20 to 1.35 sp gr), for Intermittent Use to 360 Degrees F (182 Degrees C)
SAE AMS-R-25988
Rubber, Fluorosilicone Elastomer, Oil-and-Fuel-Resistant, Sheets, Strips, Molded Parts, and Extruded Shapes
SAE AMS 2469G
Hard Anodic Coating Treatment of Aluminum and Aluminum Alloys Processing and Performance Requirements
SAE AMS 2431/1D
Peening Media (ASR) Cast Steel Shot, Regular Hardness (45 to 52 HRC)
SAE AMS-WW-T-700/4A
Tube, Aluminum Alloy, Drawn, Seamless, 5052
SAE AMS 2412H
Plating, Silver Copper Strike, Low Bake
SAE AMS 2694B
(R) In-Process Welding of Castings
SAE AMS 3218C
Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95
SAE AMS 5519M
Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 185 ksi (1276 MPa) Tensile Strength-UNS S30100
SAE AMS-P-81728
Plating, Tin-Lead (Electrodeposited)
SAE AMS 6257D
Steel Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.44C) Consumable Electrode Vacuum Remelted Normalized and Tempered
SAE AMS 5570P
Steel, Corrosion and Heat-Resistant, Seamless Tubing 18Cr - 11Ni - 0.40Ti (SAE 30321) Solution Heat Treated-UNS S32100
SAE AMS 3195E
Silicone Rubber Sponge Closed Cell, Medium
SAE AMS 2301J
Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure
SAE AMS-DTL-23053/1
Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked Chlorinated Polyolefin, Flexible-FSC 5970; Should Be Used Instead of MIL-DTL-23053/1C, Which Was Cancelled on 16 September 1999
SAE AMS 2485K
Coating, Black Oxide
SAE AMS 3652C
Polytetrafluoroethylene (PTFE) Film Non-Critical Grade
SAE AMS 6260P
Steel, Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.07 - 0.13C) (SAE 9310)-UNS G93106
SAE AMS 2631B
Ultrasonic Inspection Titanium and Titanium Alloy Bar and Billet
SAE AMS 2806B
Identification Bars, Wire, Mechanical Tubing, and Extrusions Carbon and Alloy Steels and Corrosion and Heat Resistant Steels and Alloys
SAE AMS 5844F
Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated and Work Strengthened-UNS R30035
SAE AMS 2248F
Chemical Check Analysis Limits Corrosion and Heat Resistant Steels and Alloys, Maraging and Other Highly-Alloyed Steels, and Iron Alloys
SAE AMS 2371H
Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging Stock
SAE AMS 5734K
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1650 Degrees F (899 Degrees C) Solution Heat Treated-UNS S66286
SAE AMS-T-21014
Tungsten Base Metal, High Density-Should Be Used Instead of MIL-T-21014D, Which Was Cancelled on October 5, 1998
SAE AMS-P-5510
Packing, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 Degrees to 160 Degrees F)
SAE AMS-STD-401
Sandwich Constructions and Core Materials; General Test Methods-FSC 5680; Should Be Used Instead of MIL-STD-401B, Which Was Cancelled on 24 September 1999
SAE AMS 1424H
(R) Deicing/Anti-Icing Fluid, Aircraft SAE Type I
SAE AMS 10136A
Tee - Extruded-FSC 9540
SAE AMS 5362K
Steel, Corrosion and Heat Resistant, Investment Castings 19Cr - 12Ni - 1.0(Cb + Ta) Solution Heat Treated-UNS J92811
SAE AMS 6348C
Steel, Bars 0.95Cr - 0.20Mo (0.28 to 0.33C) (SAE 4130) Normalized-UNS G41300
SAE AMS 2300K
Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure
SAE AMS 3265B
(R) Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Nonchromated Corrosion Inhibiting For Intermittent Use to 360 °F (182 °C)
SAE AMS 6370M
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)-UNS G41300
SAE AMS 4340E
Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T76511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged-UNS A97050
SAE AMS 2380E
Approval and Control of Premium-Quality Titanium Alloys
SAE AMS 6411F
Steel Bars, Forgings, and Tubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) Consumable Electrode Remelted-UNS K23080
SAE AMS 6409C
Steel, Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Special Aircraft Quality Cleanliness Normalized and Tempered-UNS G43406
SAE AMS 6487J
Steel, Bars, and Forgings 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Consumable Electrode Vacuum Melted-UNS T20811
SAE AMS-DTL-23053/13
Insulation Sleeving, Electrical, Heat Shrinkable, Fluoroelastomer, Flexible-FSC 5970; Should Be Used Instead of MIL-DTL-23053/13B, Which Was Cancelled on 16 September 1999
SAE AMS 2518B
Thread Compound, Anti-Seize, Graphite-Petrolatum
SAE AMS 2681B
Welding, Electron-Beam
SAE AMS 4347C
Aluminum Alloy Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.5Mn (6013-T4) Solution Heat Treated and Naturally Aged-UNS A96013
SAE AMS-QQ-A-200/9A
Aluminum Alloy 6063, Bar, Rod, Shapes, Tube, and Wire, Extruded-UNS A96063
SAE AMS 5837G
Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 62Ni - 21.5Cr - 9.0Mo - 3.7Cb(Nb)-UNS N06625
SAE AMS 2615F
Pressure Testing, Hydraulic Pressure as Specified
SAE AMS 5901B
Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 8Ni (SAE 30301) Solution Heat Treated-UNS S30100
SAE AMS 4289
Aluminum Alloy Castings 7.0Si - 0.55Mg - 0.12Ti (F357.0-T6) and Precipitation Heat Treated
SAE AMS-DTL-23053/11
Insulation Sleeving, Electrical, Heat Shrinkable, Fluorinated Ethylene Propylene, Non-Crosslinked-FSC 5970; Should Be Used Instead of MIL-DTL-23053/11C, Which Was Cancelled on 16 September 1999
SAE AMS 2355H
Quality Assurance, Sampling and Testing Aluminum Alloys and Magnesium Alloy Wrought Products, Except Forging Stock, and Rolled, Forged, or Flash Welded Rings
SAE AMS 5708J
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4AI Consumable Electrode or Vacuum Induction Melted 1975 degrees F (1079 degrees C) Solution Heat Treated-UNS N07001
SAE AMS 5610N
Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 12.5Cr - Low Carbon (SAE 51416, 51416Se) Free-Machining-UNS S41600 and S41623
SAE AMS 5616L
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 13Cr - 2.0Ni - 3.0W Annealed-UNS S41800
SAE AMS-R-6855A
Elastomer, Synthetic, Sheets, Strips, Molded or Extruded Shapes, General Specification for-Should Be Used Instead of MIL-R-6855, Which Was Cancelled on December 18, 1998
SAE AMS 5664E
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50A1 - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 Degrees F (1066 Degrees C) Solution Heat Treated, Precipitation Hardenable-UNS N07718
SAE AMS 10137A
Channel - Extruded-FSC 9540
SAE AMS 5853C
Steel, Corrosion and Heat Resistant, Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1800 Degrees F (982 Degrees C) Solution Treated and Work-Strengthened 160 ksi (1103 MPa) Tensile Strength-UNS S66286
SAE AMS 4943G
Titanium Alloy, Hydraulic, Seamless Tubing 3.0Al - 2.5V Annealed-(UNS R56320)
SAE AMS 5511H
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.5Ni (304L) Solution Heat Treated-UNS S30403
SAE AMS 6470L
Steel, Nitriding, Bars, Forgings, and Tubing 1.6Cr - 0.35Mo - 1.13Al (0.38 - 0.43C)-UNS K24065
SAE AMS 5343E
Steel, Corrosion-Resistant, Investmment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength-UNS J92200; UNS J92180
SAE AMS 2422E
(R) Plating, Gold
SAE AMS 5046C
Carbon Steel, Sheet, Strip, and Plate (SAE 1020 and 1025) Annealed-UNS G10200 and UNS G10250
SAE AMS-P-5516
Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F
SAE AMS 3304G
Silicone, Rubber General Purpose 70 Durometer
SAE AMS 6444K
Steel, Bars, Forgings, and Tubing 1.45Cr (0.93 - 1.05C) (SAE 52100) Premium Aircraft-Quality, Consumable Electrode Vacuum Remelted-UNS G52986
SAE AMS 6491C
Steel Bars, Forgings, and Tubing 4.1Cr - 4.2Mo - 1.0V (0.80 - 0.85C) Premium Aircraft-Quality for Bearing Applications, Double Vacuum Melted-UNS T11350
SAE AMS-QQ-A-250/30
Aluminum Alloy 2219, Plate and Sheet-UNS A92219
SAE AMS 4902H
Titanium Sheet, Strip, and Plate Commercially-Pure Annealed 40.0 ksi (276 MPa) Yield Strength-UNS R50400
SAE AMS 2807A
Identification Carbon and Low-Alloy Steels, Corrosion and Heat Resistant Steels and Alloys Sheet, Strip, Plate, and Aircraft Tubing
SAE AMS 2482C
Hard Coating Treatment of Aluminum Alloys Teflon-Impregnated or Codeposited
SAE AMS 6304K
Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C)-UNS K14675
SAE AMS 4975J
Titanium Alloy, Bars, Wire, and Rings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 0.08Si Solution and Precipitation Heat Treated-UNS R54620
SAE AMS 3302G
Silicone Rubber General Purpose 50 Durometer
SAE AMS-P-83461/2
Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Improved Performance at 275 Degree F (135 Degree C) For use in Boss Fittings, Sizes and Tolerances-FSC 5330
SAE AMS 5121J
Sheet and Strip, Steel (0.90 - 1.04C) (SAE 1095) Annealed-UNS G10950
SAE AMS 6300E
Steel Bars and Forgings 0.25Mo (0.35 - 0.40C) (SAE 4037)-UNS G40370
SAE AMS 4108F
Aluminum Alloy, Hand Forgings 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged-UNS A97050
SAE AMS-G-4343
Grease, Pneumatic System-FSC 9150; Should Be Used Instead of MIL-G-4343C, Which Was Cancelled on 10 September 1999
SAE AMS 2649C
Etch Inspection of High Strength Steel Parts
SAE AMS 5524K
Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate 18Cr - 13Ni - 2.5Mo (SAE 30316) Solution Heat Treated-UNS S31600
SAE AMS 3374C
(R) Sealing Compound Aircraft Firewall-FSC 8030
SAE AMS 5618G
Steel, Corrosion Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) Consumable Electrode Vacuum Melted-UNS S44004
SAE AMS 5344F
(R) Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H900) 180 ksi (1241 MPa) Tensile Strength (17-4)-UNS J92180 and J92200
SAE AMS 2416K
Plating, Nickel-Cadmium Diffused
SAE AMS 6351G
Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Spheroidized-UNS G41300
SAE AMS 4880D
Aluminum Bronze Alloy, Centrifugal and Continuous-Cast Castings 81.5Cu - 10.3Al - 5.0Ni - 2.8Fe Quench Hardened and Temper Annealed (TQ50)-UNS C95510
SAE AMS 2243H
Tolerances Corrosion and Heat-Resistant Steel Tubing
SAE AMS 3656E
Polytetrafluoroethylene Extrusions Normal Strength, as Sintered
SAE AMS-DTL-22499/3
Shim Stock, Laminated, CRES-FSC 9515
SAE AMS 2432C
Shot Peening, Computer Monitored
SAE AMS 4037N
Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 Flat Sheet, -T351 Plate) Solution Heat Treated
SAE AMS-QQ-A-200/16A
Aluminum Alloy, Structural Shapes, Extruded, 6061-UNS A96061
SAE AMS-C-6183
Cork and Rubber Composition Sheet; for Aromatic Fuel and Oil Resistant Gaskets
SAE AMS 5617J
Steel Bars, Wire, and Forgings, Corrosion Resistant 12Cr - 8.5Ni - 1.2Ti - 2.0Cu Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable-UNS S45500
SAE AMS 4311E
Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated-UNS A97075
SAE AMS 4946B
Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Texture Controlled Cold Worked, Stress Relieved-UNS R56320
SAE AMS-DTL-23053/18
Insulation Sleeving, Electrical, Heat Shrinkable, Modified Fluoropolymer, Crosslinked-FSC 5970; Should Be Used Instead MIL-DTL-23053/18B, Which Was Cancelled on 25 February 2000
SAE AMS 2262G
Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate
SAE AMS 2474D
Chemical Treatment for Aluminum Alloys Low Electrical Resistance Coating
SAE AMS 2808D
Identification Forgings
SAE AMS-R-83248/2
Rubber, Fluorocarbon Elastomer, High Temperature, Fluid and Compression Set Resistant (O-Rings, Class 2, 90 Hardness)
SAE AMS 5759K
Cobalt Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 52Co - 20Cr - 10Ni - 15W Solution Heat Treated-UNS R30605
SAE AMS 4787F
Gold-Nickel Alloy, Brazing Filler Metal, High Temperature 82Au - 18Ni 1740 °F (949 °C) Solidus-Liquidus Temperature-P00820
SAE AMS-QQ-A-200/15A
Aluminum Alloy Bar, Rod, Shapes, Extruded, 7075-T76 Improved Exfoliation Resistance-UNS A97075
SAE AMS 4144F
Aluminum Alloy, Hand Forgings and Rolled Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated (UNS A92219)
SAE AMS 6419F
Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.45C) Consumable Electrode Vacuum Remelted-UNS K44220
SAE AMS 4976G
Titanium Alloy, Forgings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo Solution and Precipitation Heat Treated-UNS R54620
SAE AMS 4120R
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated, Cold Worked, and Naturally Aged (T351)-UNS A92024
SAE AMS 4921L
Titanium Bars, Wire, Forgings, and Rings Commercially Pure 70 ksi (483 MPa) Yield Strength-UNS R50700
SAE AMS 4935H
Titanium Alloy Extrusions and Flash Welded Rings 6Al - 4V Annealed Beta Processed-UNS R56400
SAE AMS 5665M
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 74Ni - 15.5Cr - 8.0Fe-UNS N06600
SAE AMS 5707K
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900 degrees F (996 to 1038 Degrees C) Solution, Stabilization, and Precipitation Heat Treated-UNS N07001
SAE AMS 3824C
Cloth, Glass Finished for Resin Laminates
SAE AMS 2759/8A
(R) Ion Nitriding
SAE AMS 3660C
Polytetrafluoroethylene (PTFE) Moldings General Purpose Grade, as Sintered
SAE AMS-M-7866A
Molybdenum Disulfide, Technical, Lubrication Grade
SAE AMS-STD-753A
Corrosion-Resistant Steel Parts: Sampling, Inspection and Testing for Surface Passivation
SAE AMS 4078G
Aluminum Alloy Plate (7075-T7351) Solution Heat Treated, Stress Relieved, and Overaged-UNS A97075
SAE AMS 4439F
Magnesium Alloy Castings 4.2Zn - 1.2Rare Earths - 0.7Zr (ZE41A-T5) Precipitation Heat Treated-UNS M16410
SAE AMS 2680C
Electron-Beam Welding for Fatigue Critical Applications
SAE AMS 5589E
Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated-Composition similar to UNS N07718
SAE AMS 2431/6C
Peening Media Glass Shot
SAE AMS-QQ-A-225/1B
Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 1100-UNS A91100
SAE AMS 2759/11
Stress Relief of Steel Parts
SAE AMS 5832F
Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted-UNS N07718
SAE AMS 4083K
Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated-Ref. UNS 96061
SAE AMS 4900M
Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55.0 ksi (379 MPa) Yield Strength-UNS R50550
SAE AMS 5726D
Steel, Corrosion and Heat-Resistant, Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 °F (982 °C) Solution Heat Treated and Work-Strengthened Consumable Electrode Melted 200 ksi (1379 MPa) Tensile Strength-UNS S66286
SAE AMS-QQ-A-250/24A
Aluminum Alloy, 7075, Plate and Sheet (Improved Exfoliation Resistant)
SAE AMS 6274N
Steel Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C)(SAE 8620)-UNS G86200
SAE AMS 3209L
Chloroprene (CR) Rubber Weather Resistant 65 - 75
SAE AMS 2431/2D
Peening Media (ASH) Cast Steel Shot, High Hardness (55 to 62 HRC)
SAE AMS 3667C
Polytetrafluoroethylene Sheet, Molded General Purpose Grade, as Sintered
SAE AMS 2431B
Peening Media General Requirements
SAE AMS 4127J
Aluminum Alloy, Forgings and Rolled or Forged Rings (6061-T6) Solution and Precipitation Heat Treated-UNS A96061
SAE AMS-C-8837
Coating, Cadmium (Vacuum Deposited)-AREA MFFP; Should Be Used Instead of MIL-C-8837B, Which Was Cancelled on 10 September 1999
SAE AMS 5680J
Steel, Corrosion and Heat-Resistant, Welding Wire 18.5Cr - 11Ni - 0.40Cb (Nb) (SAE 30347)-UNS S34781
SAE AMS 4919F
Titanium Alloy Sheet, Strip, and Plate 6Al - 2Sn - 4Zr - 2Mo - 0.08Si Duplex Annealed-UNS R54620
SAE AMS 5848C
Steel, Corrosion Resistant, Bars, Wire, Forgings, Extrusions, Tubing, and Rings Wear and Galling Resistant 8.0Mn - 4.0Si - 17Cr - 8.5Ni - 0.13N Solution Heat Treated-UNS S21800
SAE AMS 2259E
Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels
SAE AMS 2809A
Identification Titanium and Titanium Alloy Wrought Products
SAE AMS 4150L
Aluminum Alloy, Extrusions and Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6) Solution and Precipitation Heat Treated-UNS A96061
SAE AMS 7490P
Rings, Flash Welded Corrosion and Heat Resistant Austenitic Steels, Austenitic-Type Iron, Nickel, or Cobalt Alloys, or Precipitation-Hardenable Alloys
SAE AMS 2405C
Electroless Nickel Plating Low Phosphorus-Reaffirmed Non-Current April 2006
SAE AMS 4201E
Aluminum Alloy Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7651) Solution Heat Treated, Stress Relieved, and Overaged-UNS A97050
SAE AMS 5648K
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 17Cr - 12Ni - 2.5Mo Solution Heat Treated-UNS S31600
SAE AMS-C-83231A
Coatings, Polyurethane, Rain Erosion Resistant for Exterior Aircraft and Missile Plastic Parts-FSC 8010
SAE AMS-I-23011B
Iron-Nickel Alloys for Sealing to Glasses and Ceramic
SAE AMS 5612J
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr Ferrite Controlled, Annealed-UNS S41001
SAE AMS-DTL-22499/4
Shim Stock, Laminated, Carbon Steel
SAE AMS 5962A
Nickel Alloy, Corrosion and Heat-Resistant, Round Bars and Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 Degrees F (968 Degrees C) Solution Treated and Work Strengthened Precipitation Hardenable-UNS N07718
SAE AMS-H-7199
Heat Treatment of Wrought Copper-Beryllium Alloys, Process for (Copper Alloys: Numbers C17000, C17200, C17300, C17500, and C17510)
SAE AMS 2665G
Brazing, Silver For Use Up to 400 °F (204 °C)
SAE AMS 5506F
Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 13Cr (0.30 - 0.40C) (SAE 51420) Annealed-UNS S42000
SAE AMS 4045J
Aluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated-UNS A97075
SAE AMS 4288
Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti (E357.0-T6) Solution and Precipitation Heat Treated
SAE AMS 6360L
Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Stress Relieved-UNS G41300
SAE AMS 4590B
Extrusions Nickel-Aluminum Bronze, Martensitic 78.5Cu - 10.5Al - 5.1Ni - 4.8Fe Solution Heat Treated and Tempered (TQ50)-UNS C63020
SAE AMS 4149D
Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74) Solution and Precipitation Heat Treated-UNS A97175
SAE AMS 5936C
Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 11Ni - 1.7Ti - 1Mo Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable-UNS S46500
SAE AMS 6400
Forgings, Steel For Aircraft/Aerospace Equipment
SAE AMS 2769A
Heat Treatment of Parts in a Vacuum
SAE AMS 2472F
Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Dyed Coating
SAE AMS 5537H
Cobalt Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate 52Co - 20Cr - 10Ni - 15W Solution Heat Treated-UNS R30605
SAE AMS 5556H
Steel, Corrosion and Heat Resistant, Seamless or Welded Hydraulic Tubing 18Cr - 11Ni - 0.70Cb (SAE 30347) Solution Heat Treated-UNS S34700
SAE AMS 4533B
Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)-UNS C17200
SAE AMS-A-25463
Adhesive, Film Form, Metallic Structural Sandwich Construction-FSC 8040
SAE AMS 2269F
Chemical Check Analysis Limits Nickel, Nickel Alloys, and Cobalt Alloys
SAE AMS 4082N
Aluminum Alloy, Seamless Drawn Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated-UNS A96061
SAE AMS 5653F
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 17Cr - 12Ni - 2.5Mo (0.030 Max C) Solution Heat Treated-UNS S31603
SAE AMS 5540M
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 74Ni - 15.5Cr - 8.0Fe Annealed-UNS N06600
SAE AMS 10138A
Zee - Equal Leg Extruded-FSC 9540
SAE AMS 2647B
(R) Fluorescent Penetrant Inspection Aircraft and Engine Component Maintenance
SAE AMS 5567E
Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (SAE 30304) Solution Heat Treated-UNS S30400
SAE AMS 5342E
Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (17-4)-UNS J91280 and UNS J92200
SAE AMS-QQ-A-250/2A
Aluminum Alloy 3003, Plate and Sheet-UNS A93003
SAE AMS 2447C
Coating, Thermal Spray High Velocity Oxygen/Fuel Process
SAE AMS 5709G
Nickel Alloy, Corrosion and Heat Resistant, Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 Degrees F (1079 Degrees C) Solution, Stabilization, and Precipitation Heat Treated-UNS N07001
SAE AMS 2486D
Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
SAE AMS 4190H
Aluminum Alloy, Welding Wire 5.2Si (4043)-UNS A94043
SAE AMS 5542N
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe Annealed-UNS N07750
SAE AMS 2451B
Plating, Brush General Requirements
SAE AMS 5040M
Steel, Sheet and Strip 0.15 Carbon, Maximum Deep Forming Grade-UNS G10100
SAE AMS 4124D
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged-UNS A97075
SAE AMS-I-23053/2
Insulation Sleeving, Electrical, Heat Shrinkable, Polyvinyl Chloride, Flexible Crosslinked and Non-Crosslinked-FSC 5970; Should Be Used Instead of MIL-I-23053/2C, Which Was Cancelled on 16 September 1999
SAE AMS 4778H
Nickel Alloy, Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range-UNS N99630
SAE AMS 5608E
Cobalt Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 40Co - 22Cr - 22Ni - 14.5W - 0.07La Solution Heat Treated-UNS R30188
SAE AMS 4013F
Aluminum Sheet, Laminated Surface Bonded
SAE AMS 4141E
Aluminum Alloy Die Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated
SAE AMS 6417F
Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 - 0.43C) Consumable Electrode Vacuum Remelted
SAE AMS 5845G
Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated, Work Strengthened, and Aged-UNS R30035
SAE AMS 5566L
Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (SAE 30304) High Pressure, Cold Drawn-UNS S30400
SAE AMS 6512E
Steel, Bars, Forgings, Tubing, and Rings 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10A1 Consumable Electrode Vacuum Melted, Annealed-UNS K92890
SAE AMS 5798F
Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe-(Composition similar to UNS N06002)
SAE AMS 3303J
Silicone, Rubber General Purpose 60 Durometer
SAE AMS 5382J
Cobalt Alloy, Corrosion and Heat Resistant, Investment Castings 54Co - 25.5Cr - 10.5Ni - 7.5W as Cast-UNS R30031
SAE AMS-DTL-23053/6
Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Semi-Rigid, Crosslinked-FSC 5970; Should Be Used Instead of MIL-DTL-23053/6D, Which Was Cancelled on 16 September 1999
SAE AMS-QQ-A-250/3
Aluminum Alloy Alclad 2014, Plate and Sheet
SAE AMS 5786F
Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 62.5Ni - 5.0Cr - 24.5Mo - 5.5Fe-UNS N10004
SAE AMS 5866D
Steel, Corrosion Resistant, Flat Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper-UNS S30200
SAE AMS 6930A
Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Solution Heat Treated and Aged-UNS R56400
SAE AMS 4107F
Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged-UNS A97050
SAE AMS 4025K
Aluminum Alloy, Sheet and Plate 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0) Annealed-UNS A96061
SAE AMS 4957D
Titanium Alloy, Round Bar and Wire 3AI - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Cold Drawn-UNS R58640
SAE AMS 5910B
Steel, Corrosion Resistant, Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength-UNS S30400
SAE AMS 6490F
Steel Bars, Forgings, and Tubing 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) Premium Aircraft-Quality for Bearing Applications Consumable Electrode Vacuum Melted-Composition similar to UNS T11350
SAE AMS 2433C
Plating, Nickel-Thallium-Boron or Nickel-Boron Electroless Deposition
SAE AMS 5706K
(R) Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4AI - 0.006B - 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F Solution Heat Treated-UNS N07001
SAE AMS 2481G
Phosphate Treatment Antichafing
SAE AMS 5544J
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed-UNS N07001
SAE AMS 2375D
Control of Forgings Requiring First Article Approval
SAE AMS 2401H
Plating, Cadmium Low Hydrogen Content Deposit
SAE AMS 2641A
Vehicle, Magnetic Particle Inspection Petroleum Base
SAE AMS 2630B
Inspection, Ultrasonic Product over 0.5 Inch (12.7 mm) Thick-Best Copy Available
SAE AMS 3819C
Cloths, Cleaning For Aircraft Primary and Secondary Structural Surfaces
SAE AMS 2249F
Chemical Check Analysis Limits Titanium and Titanium Alloys
SAE AMS 5085F
Steel Sheet, Strip, and Plate 0.47 - 0.55C (SAE 1050) Annealed-UNS G10500
SAE AMS 5689F
Steel, Corrosion and Heat Resistant, Wire 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated-UNS S32100
SAE AMS 5699G
Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Spring Temper, Precipitation Hardenable-UNS N07750
SAE AMS 5825G
Steel, Corrosion-Resistant, Welding Wire 16.4Cr - 4.8Ni - 0.22Cb(Nb) - 3.6Cu-UNS S17480
SAE AMS-QQ-S-700B
Steel, Sheet and Strip, Medium and High Carbon
SAE AMS 4026L
Aluminum Alloy, Sheet and Plate 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T4 Sheet, -T451 Plate) Solution Heat Treated and Naturally Aged-UNS A96061
SAE AMS 6528B
Steel, Bars 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Special Aircraft Quality Cleanliness Normalized-UNS G41300
SAE AMS 1428F
Fluid, Aircraft Deicing/Anti-icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV
SAE AMS 6427J
Steel Bars, Forgings, and Tubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.25 - 0.33C)-UNS K23080
SAE AMS-WW-T-700/7
Tube, Aluminum Alloy, Drawn, Seamless, 7075
SAE AMS 2370J
Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Wrought Products and Forging Stock
SAE AMS 2437C
Coating, Plasma Spray Deposition
SAE AMS 2670J
Brazing, Copper
SAE AMS 4133D
Aluminum Alloy Forgings and Rolled Rings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated-UNS A92014
SAE AMS 4944G
Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al - 2.5V Cold Worked, Stress Relieved-UNS R56320
SAE AMS 6371J
Steel, Mechanical Tubing 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)-UNS G413000
SAE AMS 7271H
Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Fuel and Low Temperature Resistant 60 - 70
SAE AMS 2673D
Brazing, Aluminum and Aluminum Alloys Molten Flux (Dip)
SAE AMS-DTL-23053/16
Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked, Elastromeric Polyolefin, Flexible-FSC 5970; Should Be Used Instead of MIL-DTL-23053/16B, Which Was Cancelled on 16 September 1999
SAE AMS 6472D
Steel, Bars and Forgings, Nitriding 1.6Cr - 0.35Mo - 1.1Al (0.38 - 0.43C) Hardened and Tempered, 112 ksi (772 MPa) Tensile Strength-UNS K24065
SAE AMS-QQ-A-200/1A
Aluminum Alloy 3003, Bar, Rod, Shapes, Tube, and Wire, Extruded-UNS A93003
SAE AMS 4081H
Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged-UNS A96061
SAE AMS 5576K
Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated-UNS S32100
SAE AMS 6514F
Steel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed-UNS K93120
SAE AMS 6431M
Steel, Bars, Forgings, and Tubing 1.05Cr - 0.55Ni - 1.0Mo - 0.11V (0.45 - 0.50C) Vacuum Consumable Electrode Remelted-UNS K24728
SAE AMS 5560L
Steel, Corrosion Resistant, Seamless Tubing 19Cr - 10Ni (SAE 30304) Solution Heat Treated-UNS S30400
SAE AMS 5667L
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable-UNS N07750
SAE AMS 6381G
Steel, Mechanical Tubing 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140)-UNS G41400
SAE AMS 1640B
Corrosion Removing Compound for Aircraft Surfaces
SAE AMS 3208M
Chloroprene (CR) Rubber Weather Resistant 45 - 55
SAE AMS 2610
Pressure Testing, Gaseous Media Pressure as Specified
SAE AMS 2253E
Tolerances Carbon and Alloy Steel Tubing
SAE AMS 4217H
Aluminum Alloy, Castings 7.0Si - 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated-UNS A03560
SAE AMS-C-81769
Chemical Milling of Metals, Specification for
SAE AMS 2491D
Surface Treatment of Polytetrafluoroethylene Preparation for Bonding
SAE AMS 5842E
Cobalt-Nickel Alloy, Corrosion and Heat Resistant, Bars 19Cr - 36Co - 25Ni -7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened-USN R30159
SAE AMS 5069F
Steel Bars, Forgings, and Tubing 0.15 - 0.20C (SAE 1018)-UNS G10180
SAE AMS 3325D
Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 55 - 65
SAE AMS 5906B
Steel, Corrosion Resistant, Sheet Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength-UNS S30200
SAE AMS-QQ-A-250/6A
Aluminum Alloy 5083, Plate and Sheet-UNS A95083
SAE AMS 2438C
Plating, Chromium Thin, Hard, Dense Deposit
SAE AMS 3653E
Tubing, Electrical Insulation Standard Wall, Extruded Polytetrafluoroethylene (PTFE)
SAE AMS 2643D
Structural Examination of Titanium Alloys Chemical Etch Inspection Procedure
SAE AMS 7267G
Rings, Sealing, Silicone (VSI) Rubber Heat-Resistant, Low Compression Set 70 - 80
SAE Standards : SAE – Aerospace Materials Specifications (AMS)
>> Page 1 2 3 4 5 6 7 |
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
