SAE Standards : SAE - Aerospace Standards (AS) Page 9
>> Page 1 2 3 4 5 6 7 8 9 
SAE ARP 335
MOUNTING PAD & FLANGE - FUEL INJECTION PUMP (7-9 CYLINDERS)-Cancelled, No Replacement
SAE ARP 336
MOUNTING PAD & FLANGE - FUEL INJECTION PUMP (12-14 CYLINDERS)-Cancelled, No Replacement
SAE ARP 4047A
Aircraft Deicing Vehicle Self-Propelled, Small Capacity
SAE ARP 4078A
Storage, Use, and Care of Borescopes and Fibrescopes (Flexible Borescopes)
SAE ARP 4171A
Safety Considerations of Food and Beverage Service Carts-Cancelled 02/2005, No Replacement
SAE ARP 4192A
Passenger Safety Video Briefings
SAE ARP 424
SPARK IGNITER OUTLINE/THREADED MOUNTING
SAE ARP 4258A
Application of Low Speed Avionic System Discrete Signal Interfaces-Cancelled 5/2006, No Replacement
SAE ARP 4268A
Aerospace Hydraulic System Fluid Contamination - Location of Sampling Points-Cancelled 1/1999, No Replacement
SAE ARP 4387A
Accommodation for Passengers with Ambulatory Disabilities Transport Category Aircraft Cabins with Seating Capacities Greater Than 44
SAE ARP 4457
Torsion Strength Testing of Hydraulic Tube Joints
SAE ARP 4466
Dimensional Compatibility of Child Restraint Systems and Passenger Seat Systems in Civil Transport Airplanes
SAE ARP 450D
FLIGHT DECK VISUAL, AUDIBLE, & TACTILE SIGNALS-Cancelled 2/1994
SAE ARP 4732
Cover Shipping Flexible (Nonreuseable)
SAE ARP 4737 SUP 1A
Aircraft Deicing/Anti-icing Methods-Supplement 1
SAE ARP 4741
Aerospace-Hydraulic Switching Valve, Pressure or Pilot Operated
SAE ARP 476A
Shock and Vibration Evaluation of Packaging-Cancelled 5/1996, No Replacement
SAE ARP 4776
Pallet/Container Loader Auto-Levelling Systems
SAE ARP 4785A
Leakage, Requirements and Test Methods, for Fuel Couplings, Pneumatic Couplings, Hydraulic Fittings, Quick Disconnects, and Hose Assemblies
SAE ARP 494D
TERMINALS-INPUT-IGNITION EXCITERS-Cancelled 10/1994, No Replacement
SAE ARP 495D
Passenger Evacuation Devices - Civil Air Transport
SAE ARP 5072
COUPLING ASSEMBLIES, NON-LOCKING PROBE STYLE, MINITURE SELF-ALIGNING, SELF-SEALING DISCONNECTS-Cancelled, No Replacement; SAE AS 5072
SAE ARP 5141
Chassis Mounted Lifts Used to Board Airline Passengers with Mobility Impairments
SAE ARP 5400
Identifiication and Implementation of Global Standardization Opportunities in the Commercial Jet Transport Industry
SAE ARP 5435
APU Gas Turbine Engine Test Cell Correlation
SAE ARP 5446
Safety Instructions for Sight-Impaired Passengers
SAE ARP 5448/2
Plain Bearing High Speed Oscillation Test
SAE ARP 5453
Training Pilots Prior Simultaneous Instrument Landing System (ILS) Precision Runway Monitor (PRM) Approaches to Closely-Spaced Parallel Runways
SAE ARP 5483/4
Rolling Element Test Method for Axial Limit and Fracture Load Testing
SAE ARP 5483/5
Rolling Element Bearing Test Method for Radial Limit and Fracture Load Testing
SAE ARP 5483/6
Rolling Element Bearing Test Method for Dimensional Stability
SAE ARP 5602/1
A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Introduction to Aerospace Fiber Optics Knowledge Competencies
SAE ARP 5602/2
A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Introduction to Aerospace Fiber Optics Hands-on Competencies
SAE ARP 5602/4
A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Fabricator Hands-on Competencies
SAE ARP 5602/7
A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Technician Knowledge Competencies
SAE ARP 5602/8
A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Introduction to Aerospace Fiber Optics Technician, Quality Assurance Inspector, or Engineer Hands-on Competencies
SAE ARP 560A
MISSILE HYDRAULIC PUMPS-Cancelled, No Replacement; SAE AIR 560
SAE ARP 5628
Final Approach Spacing System (FASS)
SAE ARP 568B
UNIFORM DASH NUMBERING SYSTEM FOR O-RINGS
SAE ARP 571C
FLIGHT DECK CONTROLS AND DISPLAYS FOR COMMUNICATION-Cancelled, No Replacement
SAE ARP 575B
Filter Patch Testing Procedures for Aerospace Hydraulic Pumps and Motors-Cancelled 10/2000; No Replacement
SAE ARP 578
DETAIL REQUIREMENTS FOR 4000 AND 5000 PSI AIRCRAFT-Cancelled, No Replacement
SAE ARP 57A
CARBURETOR ENVELOPE, AIRCRAFT - SIZE 48-Cancelled, No Replacement
SAE ARP 5889
Alternative (Ecological) Method for Measuring Electronic Product Immunity to External Electromagnetic Fields
SAE ARP 58A
CARBURETOR ENVELOPE, ARICRAFT - SIZE 58-Cancelled, No Replacement
SAE ARP 591
Conventional Representation-Cancelled 5/1996, No Replacement
SAE ARP 592A
Terminal, Taper Pin, Design and Application
SAE ARP 5991
Test Method for the Determination of Water Concentration in Polyol Ester and Diester Aerospace Lubricants by Coulometric Karl Fischer Titration
SAE ARP 5996A
Evaluation of Coking Propensity of Aviation Lubricants Using the Hot Liquid Process Simulator (HLPS) Single Phase Flow Technique
SAE ARP 59A
CARBURETOR ENVELOPE, ARICRAFT - SIZE 78-Cancelled, No Replacement
SAE ARP 602
HOSE ASSEMBLIES, FLEXIBLE METAL, AERONAUTICAL, MEDIUM PRESSURE
SAE ARP 60A
CARBURETOR ENVELOPE, AIRCRAFT - SIZE 100-Cancelled 8/1965, No Replacement
SAE ARP 614B
HOSE ASSEMBLIES, AIRCRAFT/MISSILE, HIGH TEMPERATURE
SAE ARP 669
COLOR CODING OF TERMINALS/WIRING FOR FLIGHT EQUIP.-Cancelled, No Replacement
SAE ARP 682C
Safety Lap Belts (for Civil Transport Aircraft)-Cancelled 8/2000
SAE ARP 698
THE PROCESS OF LUBRICATING AND TORQUING THREAD-Cancelled, No Replacement
SAE ARP 71
GENERATOR ENVELOPE (AUXILIARY ENGINE DRIVEN) MOUNTING PAD AND DRIVE 8 INCH BOLT CIRCLE-Cancelled, No Replacement
SAE ARP 72
MOUNTING FLANGE, PAD AND DRIVE - ACCESSORY TO GEAR BOX, 10 INCH BOLT-Cancelled, No Replacement
SAE ARP 724
PILOT'S CENTER INSTRUMENT OVERHEAD PANELS & FLIGHT-Cancelled 3/1971
SAE ARP 735
AEROSPACE VEHICLE CRYOGENIC DUCT SYSTEMS-Cancelled, No Replacement
SAE ARP 745A
General Components Specification for Explosive Actuated Valves One Cycle-Cancelled 11/2002, No Replacement
SAE ARP 750C
Passenger Seat Design, Commercial Transport Aircraft-Cancelled 5/1999; No Replacement
SAE ARP 760
400-CYCLE GROUND POWER UNIT PROVISIONS FOR AIRCRAFT-Cancelled 3/1986
SAE ARP 766A
Restraint Device for Small Children-Cancelled 1/1995, No Replacement
SAE ARP 767C
Impact Protective Design of Occupant Environment Transport Aircraft
SAE ARP 788
Procedure For The Determination Of The Silting Index Of A Fluid
SAE ARP 796
MEASUREMENTS OF AIRCRAFT EXTERIOR NOISE IN THE FLD-Cancelled, No Replacement
SAE ARP 807A
Flight Deck Interior Doors and Their Operation
SAE ARP 808A
ESCAPE PROVISIONS, FLIGHT DECK-Cancelled 2/1994
SAE ARP 816
PRESSURE FUELING SIMULATOR FOR EVALUATING AIRCRAFT-Cancelled 1/1981, No Replacement
SAE ARP 819
Fluid System Characteristics Affecting Hydraulic Pump Operation-Cancelled 12/2002, No Replacement
SAE ARP 824
HOSE ASSEMBLIES,FLEXIBLE METAL,HIGH-PRESS. & TEMP.-Cancelled, No Replacement
SAE ARP 830
MINIMUM REQUIREMENTS FOR AIR CARGO PALLETS-Cancelled 8/1982
SAE ARP 831
PALLET SIZES-Cancelled 8/1982
SAE ARP 842C
DESIGN OBJECTIVES FOR HANDLING QUALITIES OF TRANSPORT-Cancelled 2/1994
SAE ARP 862B
Skid Control Performance-Cancelled 02/2002; No Replacement
SAE ARP 865B
DIFINITIONS AND PROCEDURES FOR COMPUTING/NOISE LEVEL-Cancelled, No Replacement
SAE ARP 87
HEATER, AIRPLANE, STEAM TYPE-Cancelled, No Replacement
SAE ARP 88
HEATER, AIRPLANE, LIQUID TYPE-Cancelled, No Replacement
SAE ARP 891B
Determination of Aluminum Alloy Tempers Through Electrical Conductivity Measurement (Eddy Current)-: 2003
SAE ARP 9004A
Direct Ship - Recommended Practices for Aerospace Companies
SAE ARP 9062A
Aerospace Operator Self-Verification Programs
SAE ARP 914B
Glossary of Electrical Connection Terms-Cancelled 02/2002; No Replacement
SAE ARP 917B
Stowage of Flight Crew's Survival, Emergency and Miscellaneous Equipment-Cancelled 03/2000; No Replacement
SAE ARP 936A
Capacitor, 10 Microfarad for EMI Measurements
SAE ARP 975
COUPLING-CLAMP GROOVE V-BAND - 6,400: 9,400: 11,400 - FLANGE OD-Cancelled, No Replacement; SAE AIR 975
SAE ARP 979
PERFORMANCE QUALIFICATION TESTING FOR BACK-UP RING-Cancelled 11/1984, No Replacement
SAE ARP 990
MINIMUM REQUIREMENTS FOR AIR CARGO PALLET NETS-Cancelled 8/1982
SAE ARP 998B
Crew Restraint System-Cancelled 8/2000, No Replacement
SAE AS 100002C
Gasket-Type XI Engine Accessory Drive
SAE AS 100005C
Gasket - Type XIV-C Engine Accessory Drive
SAE AS 1011A
Fitting End Attachable, Male for 37 Degree Flared Tube Connection, Flexible Metal Hose-Straight, 45 Degree Elbow and 90 Degree Elbow Styles-Cancellation Notice
SAE AS 1015A
Fitting End Attachable, Female Flareless Machined Nipple, Flexible Metal Hose - Straight, 45 Degree Elbow and 90 Degree Elbow Styles-Cancellation Notice
SAE AS 1016A
Fitting End Attachable, Flareless Male, Flexible Metal Hose - Straight, 45 Degree Elbow and 90 Degree Elbow Styles-Cancellation Notice
SAE AS 1020
SCREW, UNION ADJUSTABLE FLARELESS-Cancelled 10/1978, No Replacement
SAE AS 106
RIVNUT, DE-ICER ATTACHMENT (KEYED)-Cancelled, No Replacement
SAE AS 108
GASKET, GOVERNOR MOUNTING-Cancelled, No Replacement
SAE AS 10B
INDICATOR, HUMIDITY, LARGE-Cancelled, No Replacement
SAE AS 1104
Single-Degree-of-Freedom Spring-Restrained Rate Gyros
SAE AS 1105A
Service Time Coding of Propulsion Engine Items-Reaffirmed Noncurrent May 2006
SAE AS 1142
HERMETICITY TESTING OF MICROELECTRONIC DEVICES-Cancelled 6/1992, No Replacement
SAE AS 1162
Attitude Instruments, Pitch and Roll Part I: Minimum Performance Standard for Equipment-Reaffirmed Noncurrent July 2001
SAE AS 1190
THERMOCOMPRESSION WIRE BONDING-Cancelled 6/1992, No Replacement
SAE AS 1194
Regulator Oxygen, Diluter Demand, Automatic Pressure Breathing-Cancelled 12/1996, No Replacement
SAE AS 1198
AEROSPACE WIRE AND CABLES METHODS OF TESTING-Cancelled, No Replacement
SAE AS 11A
EQUIPMENT, SPRAY, CORROSION-PREVENTATIVE COMPOUND-Cancelled, No Replacement
SAE AS 12
Magnetos, Aircraft, Mountings for-Cancelled 4/1997
SAE AS 126A
PROPELLER SHAFT END, TAPER TYPE - NUMBER 0-Cancelled, No Replacement
SAE AS 128
PROPELLER HUB - FLANGED - SPLINE TYPE - #71/2-Cancelled, No Replacement
SAE AS 129
PROPELLER HUB - FLANGED - SPLINE TYPE - #10-Cancelled, No Replacement
SAE AS 1297A
Reducers, Pneumatic Pressure, Missile-Reaffirmed Noncurrent May 2002
SAE AS 13
Magnetos, Aircraft, Drives for
SAE AS 130A
Tube Bending Radius-Cancelled 10/1997, No Replacement
SAE AS 132
PIN - TAPER-Cancelled 12/1964, No Replacement
SAE AS 133
PIN, CLEVIS-Cancelled, No Replacement
SAE AS 134
BOLT HEADS, HEXAGON - LARGE FILLET AIRCRAFT ENGINE-Cancelled 12/1964, No Replacement
SAE AS 13441A
Test Methods for Electrical Connectors-
SAE AS 1346
THERMOCOMPRESSION BONDING OF GOLD BEAM LEADS-Cancelled 9/1992, No Replacement
SAE AS 135
SCREW HEADS, FLAT FILLISTER - LARGE FILLET AIRCRAFT ENGINE-Cancelled 12/1964, No Replacement
SAE AS 1355A
ULTRASONIC TRANSDUCERS, IMMERSION AND CONTACT PERFORMANCE PARAMETERS-Cancelled, No Replacement
SAE AS 13591A
Cleaning Methods and Procedures for Breathing Oxygen Equipment-Cancelled 6/2001
SAE AS 1370A
METRIC SCREW THREADS - MJ PROFILE
SAE AS 1391
WRENCHING CONFIGURATION, BI-HEXAGONAL, FOR METRIC THREADED FASTENERS-Cancelled, No Replacement
SAE AS 1396
CLAMP, HALF / TUBE SUPPORT-Cancelled 1/1979
SAE AS 14
Magnetos, Aircraft, Installation of-(Inactive for New Design After October 01, 1982)
SAE AS 143C
HEATERS, AIRCRAFT, INTERNAL COMBUSTION HEAT EXCHANGE-Cancelled, No Replacement
SAE AS 1473B
Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, Straight to Straight
SAE AS 1474B
Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, Straight to 45 Degrees
SAE AS 1475B
Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, Straight to 90 Degrees
SAE AS 1476B
Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, 45 Degree to 45 Degree
SAE AS 1477B
Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, 45 Degrees to 45 Degrees
SAE AS 1478B
Hose Assembly, Flexible, Low Pressure, Flareless, Potable Water, 90 Degrees to 90 Degrees
SAE AS 1484
Hose Assembly, Semi- Rigid, Low Pressure, Flareless, Potable Water, Straight to 45 Degree
SAE AS 1485
Hose Assembly, Semi- Rigid, Low Pressure, Flareless, Potable Water, Straight to 90 Degree
SAE AS 1486
HOSE ASSEMBLY, SEMI-RIGID, LOW PRESSURE, FLARELESS, POTABLE WATER, 45° TO 45°
SAE AS 1487
HOSE ASSEMBLY, SEMI-RIGID, LOW PRESSURE, FLARELESS, POTABLE WATER, 45° TO 90°
SAE AS 1488
HOSE ASSEMBLY, SEMI-RIGID, LOW PRESSURE, FLARELESS, POTABLE WATER, 90° TO 90°
SAE AS 1492B
Interline Air Cargo Pallet Nets
SAE AS 1494A
INTERLINE AIR CARGO PALLET NETS-Cancelled, No Replacement
SAE AS 15
MAGNETOS, AIRCRAFT, TESTS OF-Cancelled, No Replacement
SAE AS 1520
AREAS FOR CALCULATING STRESS OR LOAD VALUES
SAE AS 1567
No Title Available-Renumbered as SAE MA 1567
SAE AS 1578A
Bellmouth Tube End, Welding-Cancelled, No Replacement
SAE AS 1624A
HOSE, POLYTETRAFLUOROETHYLENE (TFE), LIGHTWEIGHT 3,000 PSI, HIGH TEMPERATURE, HYDRAULIC AND PNEUMATIC-FSC 4730
SAE AS 167A
Chart - Humidity Indicator, Color Comparison
SAE AS 16842A
Clamp, Wire, Rope, Saddled, Single Grip, Steel-FSC 4030; Cancelled 08/2005, No Replacement
SAE AS 16A
PERFORMANCE PRESENTATION, AIRCRAFT RECIPROCATING ENGINE - SINGLE SPEED ENGINE-Cancelled, No Replacement
SAE AS 170
CAP, THREAD PROTECTOR (INBOARD) - DUAL PROPELLER SHAFTS-Cancelled, No Replacement
SAE AS 17109
(R) BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS AND MOTOR-GENERATORS, THIN EXTRA LIGHT, TYPE III
SAE AS 172
NUT, PROPELLER SHAFT, SHIPPING-Cancelled, No Replacement
SAE AS 1722A
HOSE, POLYTETRAFLUOROETHYLENE (TFE) LIGHTWEIGHT HIGH TEMPERATURE AND HIGH PRESSURE (3000 PSIG) WITH INTEGRAL FIRE PROTECTION
SAE AS 173
CAP, PROPELLER SHAFT, SHIPPING-Cancelled, No Replacement
SAE AS 17320
Mounting Devices for Aircraft Electric Equipment, Quick Attach-Detach, Circular, 5-, 8-, and 10-Inch-FSC 6115
SAE AS 174
SERVICE BULLETINS FOR AIRCRAFT ENGINES, PREPARATION OF-Cancelled, No Replacement
SAE AS 178
Two-Speed Propeller Reduction Gear Control-Cancelled 5/1996, No Replacement
SAE AS 17A
PERFORMANCE PRESENTATION, AIRCRAFT RECIPROCATING ENGINE - TWO SPEED ENGINE-Cancelled, No Replacement
SAE AS 181
WHEEL AND AXLE DIMENSIONS, TAIL WHEEL, HIGH PRESSURE - STRAIGHT AXLE TYPE-Cancelled, No Replacement
SAE AS 182
WHEEL AND AXLE DIMENSIONS, TAIL WHEEL, HIGH PRESSURE - STUB AXLE TYPE-Cancelled, No Replacement
SAE AS 183
WHEEL AND AXLE DIMENSIONS, LOW PROFILE - STRAIGHT AXLE TYPE-Cancelled, No Replacement
SAE AS 184
WHEEL AND AXLE DIMENSIONS, LOW - PROFILE - STUB AXLE TYPE-Cancelled, No Replacement
SAE AS 185
WHEEL AND AXLE DIMENSIONS, HIGH PRESSURE - STUB AXLE TYPE-Cancelled, No Replacement
SAE AS 1856A
Installation, Non- Reversible Fitting End-FSC 4730
SAE AS 1857A
Fitting End, Non-Reversible, Flareless Tube Connection, Oversize Thread-FSC 4730
SAE AS 1858A
Fitting End, Non- Reversible, Flared Tube Connection, Oversize Thread-FSC 4730
SAE AS 1859A
Fitting End, Non- Reversible, Straight Thread, Boss Connection-FSC 4730
SAE AS 18607A
Thermal Anti-Icing Equipment, Wing and Empennage-Cancelled 7/2001, No Replacement
SAE AS 1860A
Nut, Sleeve Coupling, Tube Reducer, Flareless-FSC 4730
SAE AS 1861A
Nut, Sleeve Coupling, Tube Reducer, Flared-FSC 4730
SAE AS 18A
PERFORMANCE PRESENTATION, AIRCRAFT RECIPORCATING ENGINE - TWO SPEED ENGINE-Cancelled, No Replacement
SAE AS 194A
Nomenclature - Engine Cooling Fan
SAE AS 196
Thermo-Sensitive Element (Iron - Constantan)
SAE AS 198
WHEEL AND AXLE DIMENSIONS, LOW PRESSURE - STUB AXLE TYPE-Cancelled, No Replacement
SAE AS 1988A
Air Cargo Pallet Extenders
SAE AS 199
WHEEL AND AXLE DIMENSIONS, LOW PRESSURE - STRAIGHT AXLE TYPE-Cancelled, No Replacement
SAE AS 19A
PERFORMANCE PRESENTATION, AIRCRAFT RECIPROCATING ENGINE - ENGINE STAGE ENGINE-Cancelled, No Replacement
SAE AS 20005
DRIVE - TYPE XV ENGINE ACCESSORY - DESIGN STANDARD FOR
SAE AS 20010
DRIVE - TYPE XX ENGINE ACCESSORY - DESIGN STANDARD FOR
SAE AS 20708/139
SYNCHRO CONTROL TRANSMITTER, TYPE 31CX6a-FSC 5990
SAE AS 20708/25
Synchro, Control Transformer, Type 16CTB4b-FSC 5990
SAE AS 20708/39
Synchro, Control Transformer, Type 19CTB4b-FSC 5990
SAE AS 21
Symbols and Sketches for Pressures and Temperatures in Induction System - Aircraft Engine-Cancelled 12/1996, No Replacement
SAE AS 211
FLASHER, POSITION LIGHT-Cancelled 6/1965, No Replacement
SAE AS 212
SWITCHES, AIRCRAFT-Cancelled, No Replacement
SAE AS 213
CRANKING MOTORS - 12 VOLT-Cancelled, No Replacement
SAE AS 21446A
BEARING, ROLLER, SELF-ALIGNING SINGLE ROW, BARREL ROLLER, TORQUE TUBE, AIRFRAME, ANTIFRICTION, SEALED TYPE V-FSC 3110; Cancelled 07/2004, No Replacement
SAE AS 215
GENERATOR CONTROL UNIT - 12 VOLT-Cancelled, No Replacement
SAE AS 216
MAGNETIC SWITCHES - 12 VOLT-Cancelled, No Replacement
SAE AS 22
PUMPS, HYDRAULIC HAND-Cancelled, No Replacement
SAE AS 22598A
Interpretation Kit, Photographic, Pocket-Size BS-5( )-FSC 6675; Cancelled 07/2004, No Replacement
SAE AS 227D
WHEELS AND BRAKES-FOR CIVIL AIRCRAFT APPLICATIONS-Cancelled, No Replacement
SAE AS 235
TERMINAL, THERMO-SENSITIVE ELEMENT-Cancelled, No Replacement
SAE AS 23A
TESTS, AIRCRAFT HYDRAULIC SYSTEMS & COMPONENTS-Cancelled, No Replacement
SAE AS 25439A
SPLICE-PERMANENT CRIMP STYLE, 2 WAY TYPE FOR ALUMINUM AIRCRAFT WIRE, CLASS 1-FSC 5940
SAE AS 25472
GAGE, IN-SERVICE-INSPECTION, FOR USE WITH MS25442 CRIMPING DIES(FOR USE WITH ALUMINUM WIRE TERMINALS)
SAE AS 25959A
Tie Downs, Cargo, Aircraft-Cancelled 06/2006 No Replacement
SAE AS 26780A
Tie Down, Cargo, Aircraft, Nylon Web Net-Cancelled 06/2006 No Replacement
SAE AS 270
AIRCRAFT POSITION LIGHTS (PERSONAL AIRCRAFT TYPES)-Cancelled, No Replacement
SAE AS 271A
AIRCRAFT POSITION LIGHTS-Cancelled, No Replacement
SAE AS 272
DEFINITIONS, AIRCRAFT TURBINE ENGINE PERFORMANCE-Cancelled, No Replacement
SAE AS 27260A
Tie Down, Cargo, Aircraft, CGU-1/B-Cancelled 06/2006 No Replacement
SAE AS 273
POSITION LIGHT FLASHERS: SINGLE-CIRCUIT-Cancelled 5/1984, No Replacement
SAE AS 27429
Splice, Conductor, Disconnect, Crimp Style, Copper, Insulated Barrel, Type II, Class 1 for 105 Degrees C Total Conductor Temperature-FSC 5940
SAE AS 278A
COCKPIT FLIGHT INSTRUMENT PANEL ARRANGEMENT-Cancelled 3/1971
SAE AS 280
WHEEL AND AXLE DIMENSIONS FOR TYPE VII TIRE-STUB (TAPERED) AXLE TYPE-Cancelled 1/1965, No Replacement
SAE AS 28912B
Bearing, Roller, Self-Aligning, Single Row Airframe, Anti-Friction, Sealed, Type I-FSC 3110; Cancelled 07/2004, No Replacement
SAE AS 290B
SEATS FOR FLIGHT DECK CREWMEN-TRANSPORT AIRCRAFT-Cancelled, No Replacement
SAE AS 29523
Hook, Filler Cap Chain-Cancelled 4/1999, No Replacement; FSC 4030
SAE AS 29600/1
CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, SEALING PLUG, SIZE 8, (SERIES A)-FSC 5935
SAE AS 29600/10
CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, RECEPTACLE, FLANGED (SERIES A)-FSC 5935
SAE AS 29600/11
CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, RECEPTACLE, JAM NUT (SERIES A)-FSC 5935
SAE AS 29600/21
CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, RECEPTACLE, JAM NUT (SERIES B)-FSC 5935
SAE AS 29600/4
CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENTAL RESISTANT, REMOVABLE CRIMP CONTACT, BACKSHELL 45°, SELF LOCKING (SERIES A AND B)-FSC 5935
SAE AS 29600/6
CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENTAL RESISTANT, REMOVABLE CRIMP CONTACTS, STOWAGE RECEPTACLE (SERIES B)-FSC 5935
SAE AS 30
BOLT HEADS, HEXAGON - AIRCRAFT ENGINE-Cancelled, No Replacement
SAE AS 307
Cover, Flight - Governor Mounting Pad
SAE AS 31
SCREW HEADS, FLAT FILLISTER - AIRCRAFT ENGINE-Cancelled, No Replacement
SAE AS 31301
CONNECTOR, RECEPTACLE, ELECTRIC, SOLDER TYPE, WALL MTG. FLANGE, PUSH-PULL COUPLING, SERIES 1 (CLASS E, P AND J)-FSC 5935
SAE AS 31321
CONNECTOR, RECEPTACLE, ELECTRIC, SOLDER TYPE, BOX MOUNTING FLANGE, PUSH-PULL COUPLING, SERIES 1 (CLASS E AND H)-FSC 5935; Amendment 1: 09/2004
SAE AS 31381
CONNECTOR, PLUG, ELECTRIC, SOLDER TYPE LANYARD, PUSH-PULL COUPLING, SERIES 1 (CLASS E, P, AND J)-FSC 5935
SAE AS 33
NUTS, PLAIN HEXAGON - AIRCRAFT ENGINE-Cancelled 7/2002, No Replacement
SAE AS 3305
INSERT, HELICAL COIL - SCREW LOCKING - AMS 7246-Cancelled, No Replacement
SAE AS 33700
Insert Arrangements, Electric Connector, Shell Size 12-FSC 5935
SAE AS 338
Shipping Containers- Aircraft Engines and Components-Cancelled 5/1996, No Replacement
SAE AS 339A
Cover-Shipping Container Log Data and Inspection Port
SAE AS 34
NUTS, CASTELLATED HEXAGON - AIRCRAFT ENGINE-Cancelled, No Replacement
SAE AS 34661
CONNECTOR, RECEPTACLE, ELECTRIC, HERMETIC, SOLDER TYPE, BOX MOUNTING, PUSH-PULL COUPLING, SERIES 3 (CLASS H)-FSC 5935; Amendment 1: 09/2004
SAE AS 35
NUTS, SHEAR, SLOTTED HEXAGON - AIRCRAFT ENGINE-Cancelled, No Replacement
SAE AS 3502
INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED SELF-BROACHING KEYS, UNS S66286
SAE AS 35091
RECEPTACLES, ELECTRIC, AIRCRAFT STORAGE BATTERY-FSC 5935
SAE AS 351A
Wrench - Propeller Shaft (Shaft Sizes No. 40-50-60)
SAE AS 352A
Wrench - Propeller Shaft (Shaft Sizes No. 10-20-30)
SAE AS 353
Handle - Propeller Shaft Wrench
SAE AS 36
WASHERS, PLAIN - AIRCRAFT ENGINE-Cancelled, No Replacement
SAE AS 3602
Nut Element, Attached Retention Element, 450 Degrees F, 125 ksi Ftu, UNS S66286-FSC 5310
SAE AS 3616
NUT, SELF-LOCKING, DOUBLE HEXAGON REDUCED FLANGE, SOLID FILM LUBE COUNTERBORED 180 KSI, 1400 °F, UNS N07001
SAE AS 3658
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN
SAE AS 3659
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN
SAE AS 38
LOCKWIRE, STAINLESS STEEL - AIRCRAFT ENGINE-Cancelled, No Replacement
SAE AS 38999/40A
Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environmental Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Wall Mounting Flange, Breech Coupling, Removable Crimp Contacts, Series IV, Metric-Cancelled 9/2000, No Replacement; FSC 5935
SAE AS 38999/41A
Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Box Mounting Flange, Hermetic, Breech Coupling, Hermetic Solder Contacts, Series IV, Metric-Cancelled 9/2000, No Replacement; FSC 5935
SAE AS 38999/42A
Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Box Mounting Flange, Breech Coupling, Removable Crimp Contacts, Series IV, Metric-Cancelled 9/2000, No Replacement; FSC 5935
SAE AS 38999/43A
Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Jam Nut Mounting, Hermetic, Breech Coupling, Hermetic Solder Contacts, Series IV, Metric-Cancelled 9/2000, No Replacement; FSC 5935
SAE AS 38999/44A
Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Jam-Nut Mounting, Breech Coupling, Removable Crimp Contacts, Series IV, Metric-Cancelled 9/2000, No Replacement; FSC 5935-3515
SAE AS 38999/45A
Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Solder Mounting, Hermetic, Breech Coupling, Hermetic Solder Contacts, Series IV, Metric-Cancelled 9/2000, No Replacement; FSC 5935
SAE AS 38999/46A
Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environmental Resistant, Removable Crimp and Hermetic Solder Contacts, Plug, Breech Coupling, EMI Grounding, Removable Crimp Contacts, Series IV, Metric-Cancelled 9/2000, No Replacement; FSC 5935
SAE AS 38999/47A
Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Plug, Breech Coupling, Removable Crimp Contacts, Series IV, Metric-Cancelled 9/2000, No Replacement; FSC 5935
SAE AS 38999/48A
Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptable, Weld Mounting Hermetic, Breech Coupling, Hermetic Solder Contacts, Series IV, Metric-Cancelled 9/2000, No Replacement; FSC 5935
SAE AS 38999/49A
Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptable, in Line Cable, Breech Coupling, Removable Crimp Contacts, Series IV, Metric-Cancelled 9/2000, No Replacement; FSC 5935
SAE AS 39
COTTER PINS, STAINLESS STEEL - AIRCRAFT ENGINE-Cancelled, No Replacement
SAE AS 39631A
Universal Joint, Antifriction Bearings-FSC 3010; Cancelled 05/2005, No Replacement
SAE AS 397A
Direction Instrument, Non-Magnetic, Stabilized Type (Directional Gyro)-Reaffirmed Noncurrent July 2001
SAE AS 399A
Direction Instrument, Magnetic, (Stabilized Type)-Reaffirmed Noncurrent July 2001
SAE AS 401B
POWERPLANT FIRE DETECTION INSTRUMENTS-THERMAL-Cancelled 4/1980
SAE AS 4074.2
High Speed Ring Bus-Cancelled 1/1993, No Replacement
SAE AS 4074/3A
Type E-1 Electrical Media Interface Characteristics
SAE AS 4149A
Clamp, Loop-Cushioned, Integral Lock-Cancelled 10/2000; No Replacement
SAE AS 415
Altimeter, Pressure, Compensated (Turbine Powered Subsonic Aircraft)
SAE AS 417A
Air Data Computer, MPS-Reaffirmed Noncurrent July 2001
SAE AS 418A
Maximum Allowable Airspeed Instruments (Reciprocating Engine Powered Aircraft)-Reaffirmed Noncurrent July 2001
SAE AS 42
CAP, THREAD PROTECTOR - SINGLE AND DUAL PROPELLER SHAFTS-Cancelled, No Replacement
SAE AS 4297
WATER CONDITIONING AGENTS FOR AQUEOUS MAGNETIC PARTICLE INSPECTION-Cancelled, No Replacement
SAE AS 43
GOVERNOR, PROPELLER, MOUNTING PAD & DRIVE-Cancelled, No Replacement
SAE AS 430
Powerplant Fire Detection Instruments - Thermal and Flame Contact Types (Turbine)-Reaffirmed Noncurrent July 2001
SAE AS 436
Mach Meters (Turbine Powered Subsonic Aircraft)-Reaffirmed Noncurrent July 2001
SAE AS 4364
UTILIZATION OF BATTERY-POWERED GROUND SUPPORT EQUIPMENT-Cancelled, No Replacement
SAE AS 4571B
(R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Flareless, 45 Degrees to 90 Degrees-FSC 4720
SAE AS 4573B
(R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Flareless, 90 Degrees to 90 Degrees-FSC 4720
SAE AS 45A
GENERATOR, MOUNTING PAD AND DRIVE-Cancelled, No Replacement
SAE AS 4627B
R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, HEAVY-DUTY, 275 DEGREES F, 3000 psi FLARELESS TITANIUM FITTINGS, INCLUDING JUMP SIZE, 45 DEGREES TO 45 DEGREES-FSC 4720
SAE AS 4644
Hose Assembly, Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 4000 psi, Flared, Straight to 90 Degrees, CRES Fittings-FSC 4720
SAE AS 4645
Hose Assembly, Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 4000 psi, Flared, 45 Degrees to 45 Degrees, CRES Fittings-FSC 4720
SAE AS 4646
Hose Assembly, Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 4000 psi, Flared, 45 Degrees to 90 Degrees, CRES Fittings-FSC 4720
SAE AS 4707A
Test Methods Evaluation of Nonflammable, Chlorotrifluoroethylene Base Hydraulic Fluid-Cancelled 8/2000
SAE AS 4720
Batch Qualification Procedure for Tensile Strength, Elongation and Specific Gravity of Polytetrafluoroethylene (PTFE) Resins, Virgin, Modified, Pigmented and Filled Compounds Used for Compression Molding
SAE AS 474
FLANGE-ACCESSORY-SLOTTED MOUNTING HOLES-Cancelled, No Replacement
SAE AS 481B
FLANGE PILOT-ACCESSORY, O RING SEAL-Cancelled, No Replacement
SAE AS 486B
AIRCRAFT CIRCUIT BREAKER AND FUSE ARRANGEMENT
SAE AS 48A
GUN SYNCHRONIZER, MOUNTING PAD AND DRIVE-Cancelled, No Replacement
SAE AS 49A
PUMP, VACUUM OR HYDRAULIC, PAD AND DRIVE, TYPE I-Cancelled, No Replacement
SAE AS 5018
Washer, Flat, Beam Seal Fitting
SAE AS 50A
PUMP, VACUUM OR HYDRAULIC, PAD AND DRIVE, TYPE II-Cancelled, No Replacement
SAE AS 51A
PUMP, VACUUM OR HYDRAULIC, PAD AND DRIVE, TYPE III-Cancelled, No Replacement
SAE AS 521
DRIVE ACCESSORY 9.000 PILOT DIAMETER - QAD-Cancelled 1/1964, No Replacement
SAE AS 5241
FITTING, ELBOW, 90°, BULKHEAD, FLARED TO FLARELESS
SAE AS 525
FLANGE ACCESSORY 9.000 PILOT DIAMETER - QAD-Cancelled 8/1986, No Replacement
SAE AS 528
ADAPTER-10.000 BOLT CIRCLE TO 4.125 PILOT DIAMETER-Cancelled 8/1986, No Replacement
SAE AS 532A
Drive - 3/4 Generator - 8
SAE AS 533A
Flange - 3/4 Generator 8
SAE AS 534A
Drive - 3/4 Generator - 10
SAE AS 535
DRIVE-3/4 GENERATOR-10
SAE AS 53A
POWER TAKE-OFF, MOUNTING PAD & DRIVE, TYPE I & II-Cancelled, No Replacement
SAE AS 54
TACHOMETER DRIVE - TYPE I
SAE AS 55151A
Pump, Hydraulic, Ram, Hand Driven
SAE AS 5537
Weather Support to Deicing Decision Making (WSDDM) Winter Weather Nowcasting System-Contains Color
SAE AS 55941/6
SWITCH, TOGGLE, MAGNETIC HOLD-IN, DP3T LEVER LOCK-FSC 5930
SAE AS 5603
Digital Fiber Optic Link Loss Budget Methodology for Aerospace Platforms
SAE AS 5669
JAUS Transport Specification
SAE AS 5681
Minimum Operational Performance Specification for Remote On-Ground Ice Detection Systems
SAE AS 5688A
Cable Assemblies; Aircraft, Proof Testing and Prestretching of
SAE AS 5725
Interface Standard, Miniature Mission Store Interface
SAE AS 5763
CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, FUEL AND PETROLEUM BASED HYDRAULIC FLUID
SAE AS 5767
FITTING ASSEMBLY, TEE, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
SAE AS 580B
PILOT VISIBILITY FROM THE FLIGHT DECK DESIGN-Cancelled, No Replacement
SAE AS 5964
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, 45 DEGREES ELBOW TO 45 DEGREES ELBOW-FSC 4720
SAE AS 5965
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, 45 DEGREE ELBOW TO 90 DEGREE ELBOW-FSC 4720
SAE AS 61
PRIMER ELECTRICAL CONNECTION - AIRCRAFT-Cancelled, No Replacement
SAE AS 62
Carburetor Flange, Aircraft 2 Bolt - Single Barrel - No. 3 and 4-Cancelled 4/2000, No Replacement
SAE AS 6370
Wire, Electrical, Insulated, Antenna-FSC 6145
SAE AS 64
CARBURETOR FLANGE, AIRCRAFT, DOUBLE BARREL - SIZE 12 AND 16-Cancelled, No Replacement
SAE AS 6439
Hose, Rubber, Aircraft Paint Finish Remover-FSC 4720
SAE AS 65
CARBURETOR FLANGE, AIRCRAFT, DOUBLE BARREL - SIZE 24-Cancelled, No Replacement
SAE AS 66
CARBURETOR FLANGE, AIRCRAFT, DOUBLE BARREL - SIZE 24 (REMOTE FUEL DISCHARGE TYPE)-Cancelled, No Replacement
SAE AS 6625A
Spray Equipment, Aircraft Windshield, Anti-Icing-Cancelled 06/2002; No Replacement
SAE AS 67
CARBURETOR FLANGE, AIRCRAFT, RECTANGULAR - NO. 9 AND SIZE 12-Cancelled, No Replacement
SAE AS 68
CARBURETOR FLANGE, AIRCRAFT, RECTANGULAR - SIZE 24 AND 30-Cancelled, No Replacement
SAE AS 6852A
Splice, Conductor, Electric, Disconnect
SAE AS 69
CARBURETOR FLANGE, AIRCRAFT, TRIPLE BARREL - SIZE 41-Cancelled, No Replacement
SAE AS 6A
ENCLOSURE, STORAGE AND SHIPPING (AIRCRAFT ENGINE)-Cancelled, No Replacement
SAE AS 70
FLANGE, TUBE - TWO BOLT TYPE - AIRCRAFT ENGINE-Cancelled, No Replacement
SAE AS 7108/2A
National Aerospace and Defense Contractors Accreditation Program Requirements for Etch Processes (Macrostructure, Nital, Temper, Blue Etch Anodize)
SAE AS 7205
Spring Pins, Tubular, Carbon Steel, Procurement Specification for
SAE AS 7241B
WASHERS, SPRING LOCK, CORROSION RESISTANT STEEL 18Cr - 9Ni-Cancelled, No Replacement
SAE AS 73
DE-ICER, ATTACHMENT ASSEMBLIES (INFLATABLE TYPE)-Cancelled, No Replacement
SAE AS 74
FAIRING, DE-ICER ATTACHMENT-Cancelled, No Replacement
SAE AS 75
PEG, DE-ICER POSITIONING-Cancelled, No Replacement
SAE AS 76
RIVNUT, DE-ICER ATTACHMENT (KEYLESS)-Cancelled, No Replacement
SAE AS 77
SCREW - DE-ICER-Cancelled, No Replacement
SAE AS 78
SCREW, DE-ICER RIVNUT PLUG-Cancelled, No Replacement
SAE AS 79
CATALOGS, SPARE PARTS, FOR AIRCRAFT ENGINES-Cancelled, No Replacement
SAE AS 7928/10
TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC, TIN WHISKER (PERMANENT, TYPE II, CLASS 1) FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS 7928/11
TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TIN WHISKER RESISTANT, TYPE I, CLASS I, FOR 175 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS 7928/9
TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, TIN WHISKER RESISTANT FOR THIN WALL WIRE, TYPE II, CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
SAE AS 7B
PLUG, DEHYDRATOR (CABLE SUPPORTING)-Cancelled, No Replacement
SAE AS 80
CATALOGS, OVERHAUL TOOL, FOR AIRCRAFT ENGINES-Cancelled, No Replacement
SAE AS 8032
AIRCRAFT GENERAL PURPOSE ELECTRICAL WIRE, MINIMUM-Cancelled, No Replacement
SAE AS 81366A
Boundary Layer Control System; Pressure-Cancelled 07/2004 No Replacement
SAE AS 815
SPARK IGNITER OUTLINE/.500-20 THREADED MOUNTING-Cancelled 2/1985, No Replacement
SAE AS 81659-A2
Connectors, Electrical, Rectangular Crimp Contacts General Specification For
SAE AS 81807A
Marking of Aircraft Ground Support Equipment and Other Flight Line Vehicles with Retro-Reflective Materials; Process For-FSC 1730; Cancelled 07/2004 No Replacement
SAE AS 8181A
Detector, Ice, Air Intake Duct, Aircraft Engines and Airframe Systems, General Specification for-Cancelled 6/2002, No Replacement
SAE AS 81822/10
WIRE, ELECTRICAL, SOLDERLESS WRAP, UNINSULATED, SILVER COATED SOLID CONDUCTOR-FSC 6145
SAE AS 827
Aircraft Anti-Collision Lights-Cancelled 8/1998; No Replacement
SAE AS 83
SCREW THREADS, AERONAUTICAL-Cancelled, No Replacement
SAE AS 83413/8A
CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: TYPE IV JUMPER CABLE ASSEMBLY, LEAD, ELECTRICAL-FSC 6150
SAE AS 838
Aircraft Hydraulic Starter/Pumps
SAE AS 845
MINIMUM DESIGN STANDARDS FOR SMOKE PROTECTION-Cancelled 8/1981
SAE AS 85049/139
BUSHING, CABLE CLAMP TO CABLE, TELESCOPING FOR AS85049 CABLE CLAMPS CATEGORY 9
SAE AS 85049/49A-A1
Connector Accessories, Electrical, Strain Relief, Straight, Self-Locking and Non-Self-locking, Category 4B (For MIL-DTL-38999 Series I and II Connectors)
SAE AS 85080/3
INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, POLYURETHANE FLEXIBLE-FSC 5970
SAE AS 85080/4
INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, CHLOROSULFONATED POLYETHYLENE FLEXIBLE-FSC 5970
SAE AS 85080/5
INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, POLYCHLOROPRENE-FSC 5970
SAE AS 85352/2
INFLATOR ASSEMBLY REMOTE CONTROLLER ASSEMBLY
SAE AS 85485/7
CABLE, ELECTRIC, FILTER LINE, UNSHIELDED, UNJACKETED, MULTIPLE-COMPONENT, RADIO FREQUENCY ABSORPTIVE, 150 DEGREES C, 600-VOLT-FSC 6145
SAE AS 8804A
Deicing System, Pneumatic Boot, Aircraft, General Specification for-No Replacement
SAE AS 8A
PLUG, DEHYDRATOR-Cancelled, No Replacement
SAE AS 9000 APPENDIX 1A
AS9000 AUDIT SUMMARY AND SUPPLIER PROFILE INSTRUCTIONS
SAE AS 9000A
Aerospace Basic Quality System Standard-Cancelled 11/1999
SAE AS 9012A
Aerospace First Article Inspection Requirement
SAE AS 9015
Supplier Self Verification Process Delegation Programs
SAE AS 91761A
Plug, Expansion - Tapered, AMS 5040-FSC 5340; Cancelled 08/2005, No Replacement
SAE AS 92B
Cones, Front, Propeller Hub
SAE AS 9334
BOLT, TEE HEAD - AMS 5735, CHAMFERED, .3125-24 UNJF-3A-Cancelled, No Replacement
SAE AS 939
SOLDER SLEEVES, HEAT SHRINKABLE, INSULATED-Cancelled, No Replacement
SAE AS 93D
Cones, Rear, Propeller Hub
SAE AS 9514A
CUSHION, LOOP CLAMP-MULTIPLE, 3-TUBE, AMS 3677-FSC 5340
SAE AS 9515A
CUSHION, LOOP CLAMP-MULTIPLE, 2-TUBE, AMS 3677-FSC 5340
SAE AS 9B
PROTECTOR & CABLE ATTACHMENT, SPARK PLUG TERMINAL (AIRCRAFT ENGINE)-Cancelled, No Replacement
SAE AS E25
HARDWARE SPECIFICATIONS SUBSCRIPTION-Cancelled, No Replacement
SAE AS5874
CLAMP, LOOP TYPE, CUSHIONED SUPPORT
SAE HIR 1063B
GENERAL - ENVIRONMENTAL CONSIDERATIONS FOR MARINE VEHICLES
SAE HIR 1149B
HYDRAULIC FLUIDS FOR MARINE VEHICLES
SAE HIR 1265
UNDERWATER FLUID SYSTEM EQUIPMENT AND COMPONENTS-Cancelled, No Replacement
SAE HIR 1415A
DESIGN GUIDE FOR HYDRAULIC SYSTEMS FOR SUBMERSIBLE-Cancelled, No Replacement
SAE HIR 1496B
HYDRAULIC SYSTEM DESIGN CRITERIA FOR ADVANCED MARINE SURFACE VEHICLES
SAE HIR 1514A
DESIGN AND SPECIFICATION GUIDE FOR HYDRAULIC PUMPS USED ON ADVANCED SURFACE CRAFT AND SUBMERSIBLE VEHICLES
SAE HIR 1528A
SEAWATER SYSTEM DESIGN CRITERIA FOR ADVANCED MARIN
SAE HIR 1559A
BLEED - AIR PNEUMATE SYSTEMS FOR GAS TURBINE EQUIP
SAE HIR 1694
MATERIALS FOR FLUID SYSTEMS OF MARINE VEH.
SAE HRP 1496C
HYDRAULIC SYSTEM DESIGN CRITERIA FOR HIGH PERFORMANCE MARINE SURFACE VEHICLES AND SMALL SUBMERSIBLE VEHICLES-Cancelled, No Replacement
SAE HRP 4538
SELECTION OF HYDRAULIC DIRECTIONAL CONTROL VALVES FOR MARINE VEHICLE APPLICATIONS-Cancelled, No Replacement
SAE MA 1634
HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, STRAIGHT TO 45 DEGREES
SAE MA 1636
HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, 45 DEGREES TO 45 DEGREES
SAE MA 1637
HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, 45 DEGREES TO 90 DEGREES
SAE MA 1638
Hose Assembly, Convoluted, Polytetrafluoroethylene, Metallic Reinforced Conductive, Flareless, 90 Degrees to 90 Degrees
SAE MA 2023A
(R) ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD, METRIC
SAE MA 2026B
Fitting, Elbow, 90 Degree, Thin Wall, Flareless, Metric
SAE MA 2066A
(R) Fitting, Reducer, Integral Weld Ring, 21,000 kPa, Metric
SAE MA 2067A
SEAL SLEEVE, HYDRAULIC, OLIVE TO WELD, 20000 KPA,-Cancelled, No Replacement
SAE MA 2068A
Union, Port to Flareless, Hydraulic, 21 000 kPa, Metric-Cancelled 3/1993, No Replacement
SAE MA 2071A
(R) Fitting, Cross, Integral Weld Ring, 21,000 kPa, Metric
SAE MA 2072
NUT, OLIVE, FLARELESS, FEMALE, 20000 KPA, METRIC-Cancelled, No Replacement
SAE MA 2073
NUT, MALE, OLIVE, FLARELESS, 20000 KPA, METRIC-Cancelled, No Replacement
SAE MA 2074
SEAL RING, OLIVE, 20000 KPA, METRIC-Cancelled, No Replacement
SAE MA 2140
HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID REINFORCED, 28 000 KAP, HYDRAULIC AND PNEUMATIC-Cancelled
SAE MA 2150/6
CLAMP, LOOP STYLE, WITH INSERT, PHOSPHATE ESTER FLUID RESISTANT, METRIC
SAE MA 2241
Coupling Assembly, Threadless, Flexible, Fixed Cavity, Self-Bonding, Metric
SAE MA 2242
Assembled Coupling, Threadless - Flexible, Fixed Cavity, Self-Bonding, Envelope Dimensions, Metric-FSC 4730
SAE MA 2246
Sleeve End, Threadless Coupling, Flexible, Fixed Cavity, Self-Bonding, Design Standard, Metric-FSC 4730
SAE MA 2284
Fitting, Tee, Beam Seal, Metric
SAE MA 2292
Fitting, Elbow, 45 Degree, Bulkhead Beam Seal, Metric
SAE MA 2294
FITTING, ELBOW, 90°, BEAM SEAL, METRIC
SAE MA 2304
FITTING, UNION, REDUCER, BEAM SEAL, METRIC
SAE MA 3471
Gasket - Engine Accessory Drive Square, 127.28 BC, Metric-FSC 2995
SAE MA 4095
Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced 135 Degrees C, 34,500 kPa, Hydraulic and Pneumatic
SAE MA 4098
Hose Assembly, Polytetrafluoroethylene, Heavy Duty, Metallic Reinforced, 204 °C, 35 000 kPa Hydraulic and Pneumatic, Metric
SAE MA 4569
Hose Assembly, PTFE, Aramid Reinforced, Standard Duty, 21 000/28 000 kPa, 135 Degrees C, Titanium Fittings, Flareless, Including Jump Sizes, Straight to 45 Degrees, Metric-FSC 4720
SAE MA 4571
Hose Assembly, PTFE, Aramid Reinforced, Standard Duty, 21 000/28 000 kPa, 135 Degrees C, Titanium Fittings, Flareless, 45 Degrees to 90 Degrees, Metric-FSC 4720
SAE MA 4572
Hose Assembly, PTFE, Aramid Reinforced, Standard Duty, 21 000/28 000 kPa, 135 Degrees C, Titanium Fittings, Flareless, 45 Degrees to 45 Degrees, Metric-FSC 4720
SAE MA 4573
Hose Assembly, PTFE, Aramid Reinforced, Standard Duty, 21 000/28 000 kPa, 135 Degrees C, Titanium Fittings, Flareless, 90 Degrees to 90 Degrees, Metric-FSC 4720
SAE MA 4623
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced Heavy-Duty, 21 000 kPa, 135 Degrees C, Aircraft Hydraulic Systems, Metric
SAE MA 4624
Hose Assembly, PTFE, Para Aramid Reinforced, Heavy-Duty, 21 000 kPa, 135 Degrees C, Flareless, Titanium Fittings, Jump Sizes, Straight to Straight, Metric-FSC 4720
SAE MA 4625
Hose Assembly, PTFE, Para Aramid Reinforced, Heavy-Duty, 21 000 kPa, 135 Degrees C, Flareless, Titanium Fittings, Jump Sizes, Straight to 45 Degrees, Metric-FSC 4720
SAE MA 4626
Hose Assembly, PTFE, Para Aramid Reinforced, Heavy-Duty, 21 000 kPa, 135 Degrees C, Flareless, Titanium Fittings, Jump Sizes, Straight to 90 Degrees, Metric-FSC 4720
SAE MA 4627
Hose Assembly, PTFE, Para Aramid Reinforced, Heavy-Duty, 21 000 kPa, 135 Degrees C, Flareless, Titanium Fittings, Jump Sizes, 45 Degrees to 45 Degrees, Metric-FSC 4720
SAE MA 4628
Hose Assembly, PTFE, Para Aramid Reinforced, Heavy-Duty, 21 000 kPa, 135 Degrees C, Flareless, Titanium Fittings, Jump Sizes, 45 Degrees to 90 Degrees, Metric-FSC 4720
SAE MA 5066
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 21,000 KPA, 135 °C, BEAM SEAL, STRAIGHT TO STRAIGHT, METRIC
SAE MA 5067
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 21,000 kPa, 135 °C, BEAM SEAL, STRAIGHT TO 45°, METRIC
SAE MA 5068
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 21,000 kPa, 135 °C, BEAM SEAL, STRAIGHT TO 90°, METRIC
SAE MA 5069
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 21,000 kPa, 135 °C, BEAM SEAL, 45° TO 45°, METRIC
SAE MA 5073
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 34,500 kPa, 135 °C, BEAM SEAL, STRAIGHT TO STRAIGHT, METRIC
SAE MA 5074
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 34,500 kPa, 135 °C, BEAM SEAL, STRAIGHT TO 45°, METRIC
SAE MA 5075
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 34,500 kPa, 135 °C, BEAM SEAL, STRAIGHT TO 90°, METRIC
SAE MA 5076
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 34,500 kPa, 135 °C, BEAM SEAL, 45° TO 45°, METRIC
SAE MA 5077
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 34,500 kPa, 135 °C, BEAM SEAL, 45° TO 90°, METRIC
SAE MA 5078
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 34,500 kPa, 135 °C, BEAM SEAL, 90° TO 90°, METRIC
SAE MA 5405/2
SPLICE, FIBER OPTIC, AEROSPACE INTER-CONNECT (MIL-PRF-29504 TERMINI)
SAE MA 620 SUP 1
Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft, Metric (Supplement 1)
SAE Standards : SAE - Aerospace Standards (AS) Page 9
>> Page 1 2 3 4 5 6 7 8 9 |
