SAE  Standards : SAE - Aerospace Standards (AS) Page 6

SAE MA 3438
Spacer, Sleeve - for 6mm Bolt, AMS4901 or AMS4921, Metric-FSC 5365

SAE MA 3441
Washer-Key, Cup Lock, AMS 5510, Metric-FSC 5310

SAE MA 4035
Rings, Retaining - Spiral Wound, Uniform Section Corrosion Resistant, Procurement Specification For, Metric

SAE MA 4044
Nut, Spanner - End Slots, Cupwasher Locked, UNS S66286, Silver Plated, MJ Thread, Metric-FSC 5310

SAE MA 4811
Insert - Thin Wall, Self-Locking, Metric Short and Long Length Installation and Removal of

SAE AIR 1076
Aircraft Fire Protection for Reciprocating and Gas Turbine Engine Installations

SAE AIR 1116A
Fluid Properties

SAE AIR 1151
Flight Compartment Glare

SAE AIR 1221
Electromagnetic Compatibility (EMC) System Design Checklist

SAE AIR 1336A
Vehicle Electrical Systems

SAE AIR 1660B
Fuel Level Control Valves/Systems

SAE AIR 171D
Glossary of Technical and Physiological Terms Related to Aerospace Oxygen Systems

SAE AIR 1749
Aircraft Engine Fuel Feed and Transfer Component Pressure Definitions

SAE AIR 1811A
Liquid Cooling Systems

SAE AIR 1823A
(R) Engineering Analysis System (EASY) Computer Program for Dynamic Analysis of Aircraft ECS

SAE AIR 1850A
Twin Engine Helicopter Power Requirements

SAE AIR 4172
HELICOPTER ENGINE MOUNTING

SAE AIR 4394
Vacuum Investment Cast PH13-8Mo Corrosion Resistant Steel

SAE AIR 4827
Modeling Techniques for Jet Engine Test Cell Aerodynamics

SAE AIR 4964
Titanium Alloy Bars, Wire, Forgings, and Rings 4.5Al - 3V - 2Fe - 2Mo Annealed

SAE AIR 5464
Metal Clad Fibers for Electrical Shielding & Harness Overbraid

SAE AIR 787A
(R) Filter-Element Cleaning Methods

SAE ARD 4461
ASSEMBLY AND SOLDERING CRITERIA FOR HIGH QUALITY/HIGH RELIABILITY SOLDERED WIRE AND CABLE TERMINATION IN AEROSPACE VEHICLES

SAE ARP 1088A
Aircraft Indicating Systems

SAE ARP 1107B
Tail Bumpers for Piloted Aircraft

SAE ARP 1287A
SAE Standards for Use in the Design of Aerospace Vehicular Ground Equipment

SAE ARP 1315D
(R) Safety Considerations for Airplane Lavatories

SAE ARP 1323A
Type Measurements of Airplane Interior Sound Pressure Levels During Cruise

SAE ARP 1350
Installation and Mounting of Singlehole Mount, Cylindrical, Electrical Connectors, Procedure for

SAE ARP 1372B
Minimum Requirements for Air Cargo Unit Load Device Ground Handling and Transport Systems

SAE ARP 159A
Dielectric Testing of Spark Plugs

SAE ARP 4101/3
Crew Rest Facilities

SAE ARP 4102/3
Flight Deck Tire Pressure Monitoring System (TPMS)

SAE ARP 4102/9A
Flight Management System (FMS)

SAE ARP 4104/1
Flight Envelope Awareness/Protection

SAE ARP 4769A
Crew Rest Container for Main Deck or Lower Deck

SAE ARP 4791A
Human Engineering Recommendations for Data Link Systems

SAE ARP 4865
GAS TURBINE ENGINE FUEL NOZZLE TEST PROCEDURES

SAE ARP 5021
Oxygen Cylinder Installation Guide

SAE ARP 5257
Tire Overspeed Landing Test

SAE ARP 5298
Aircraft Fueling Adapter Wear Limits

SAE ARP 5430
Human Interface Criteria for Vertical Situation Awareness Displays

SAE ARP 5621
Electronic Display of Aeronautical Information (Charts)

SAE ARP 583H
Flight Attendant Stations

SAE ARP 5890
Guidelines for Preparing Reliability Assessment Plans for Electronic Engine Controls

SAE ARP 711A
Illuminated Signs

SAE ARP 726A
Universal Leak Detector

SAE ARP 731C
(R) General Requirements for Application of Vapor Cycle Refrigeration Systems for Aircraft

SAE ARP 798A
(R) Design Criteria for White Incandescent Lighted Aerospace Instruments

SAE ARP 846
Low Tension Spark Igniter Sparking Voltage Test

SAE AS 10380
Coupling Installations, Standard Conduit, Electrical-FSC 5975

SAE AS 1065
Quality & Serviceability Requirements for Aircraft Cylinder Assemblies Charged with Aviator′s Breathing Oxygen

SAE AS 1130F
Air and Air/Surface (Platform) Cargo Pallets

SAE AS 125851 THRU AS 125875B
(R) PLUG - PIPE, CADMIUM PLATED, STEEL UNS G87400, COUNTERSUNK HEX

SAE AS 1426A
Standard Galley System Specification Part I, Performance, Design, Development

SAE AS 15532
Data Word and Message Formats

SAE AS 1560A
Modules and Basic Racks of Metric Spur and Helical Gears

SAE AS 1585C
FITTING, REDUCER, INTEGRAL WELD RING, 3000 PSI-FSC 4730

SAE AS 1831A
Electrical Power, 270 V DC, Aircraft, Characteristics and Utilization of

SAE AS 1974
Clamps, Support, Comparative Fatigue Strengths, Test Method

SAE AS 21432A
(R) BEARING, ROLLER, NEEDLE, TRACK ROLLER, INTEGRAL STUD, TYPE VII, ANTIFRICTION, INCH

SAE AS 22074
CIRCUIT BREAKER, RECYCLING, TRIP-FREE, PUSH-PULL, 1/2 THRU 5 AMPERE, TYPE I-FSC 5925

SAE AS 25435A
TERMINAL-LUG, CRIMP STYLE, STRAIGHT TYPE, FOR ALUMINUM AIRCRAFT WIRE, CLASS 1-FSC 5940

SAE AS 25481
Cable Assemblies, Electric Power, for Portable Ground Support Test Equipment

SAE AS 3083
Insert - CRES Helical Coil Fine Thread, Straight Stud Locking, 3 Dia Nom Length-FSC 5340

SAE AS 3109
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, CRES AMS 5731, .3125-24 UNJF-3A-FSC 5306

SAE AS 31371A
CONNECTOR, PLUG, ELECTRIC, SOLDER TYPE, PUSH-PULL COUPLING SERIES 1 (CLASS E, P AND J)-FSC 5935

SAE AS 3139A
STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, AMS 5731 .250-28 UNJF-3A X .190-32 UNJF-3A-FSC 5307; Reaffirmed Noncurrent July 2004

SAE AS 3179
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CL TOL SHANK, AMS 5643, .500-20, UNJF-3A

SAE AS 3180
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CL TOL SHANK, AMS 5643, .5625-18 UNJF-3A

SAE AS 3246B
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A

SAE AS 34561
Connectors, Plug, Electrical, Rear Release, Crimp Contact, AN Type-FSC 5935

SAE AS 3550
Assembly Nut, Plate, Removable Self-Locking Nut-FSC 5310

SAE AS 38386/1A
(R) CONNECTOR, AIR DUCT HOSE, GROUND COOLING, MALE

SAE AS 39029/108
Contacts, Electrical Connector, Pin, Crimp Removable, Socket, Single Wire-FSC 5935

SAE AS 39029/51
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded (for MIL-C-83733 Connectors)-FSC 5935

SAE AS 4112
Production Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Remote Terminals

SAE AS 4202A
Adapter - Port Connection, Ring Locked Design, Installation and Removal of 8000 psi Systems

SAE AS 4341
Wire, Retaining for Retained Nut

SAE AS 4346
Union Assembly, Adjustable End

SAE AS 4542
Elbow, 90 Degrees, Beam Seal, Male 4000 psi, Hydraulic-FSC 4730

SAE AS 4625B
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275 Degrees F, 3000 psi Flareless, Titanium Fittings, Including Jump Size, Straight to 45 Degrees-FSC 4720

SAE AS 4642
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 4000 psi, FLARED, STRAIGHT TO STRAIGHT, CRES FITTINGS-FSC 4720

SAE AS 4669A
Fitting, Elbow, 90 Degrees, Bulkhead, Short Flareless-FSC 4730

SAE AS 4677A
Fitting, Tee, Bulkhead on Run, Boss on Side, Short Flareless-FSC 4730

SAE AS 4706B
Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Male to 90° Male

SAE AS 483B
Skid Control Equipment

SAE AS 4984
Coating Requirements for Aerospace Hand Tools

SAE AS 50151
Connectors, Electrical, Circular Threaded, AN Type, General Specification For-FSC 5935

SAE AS 5072/1A
Coupling Assembly, .375 Diameter, Non-Locking Probe Style, Miniature Self-Sealing-Aligning, Self-Sealing Disconnect for Ethylene/Glycol/ Water

SAE AS 5072C
Coupling Assemblies, Non-Locking Probe Style, Miniature Self-Aligning, Self-Sealing Disconnects

SAE AS 50861/3
Wire, Electrical, Polyvinyl Chloride Insulated, PVC-Glass-PVC-Nylon, Tin-Coated Copper Conductor, 600-Volt, 105°C

SAE AS 5258/2
Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle

SAE AS 5419/1
WIRE, THERMOCOUPLE, HIGH TEMPERATURE AND FIRE RESISTANT LIGHT WEIGHT, SMALL DIAMETER NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, 260 DEGREES C

SAE AS 5419/5
WIRE, THERMOCOUPLE, FLUOROPOLYMER INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN), THERMOCOUPLE EXTENSION, 200 DEGREES C

SAE AS 5461A
HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 45 DEGREE TO 45 DEGREE

SAE AS 5531
UNION, SHORT FLARELESS TUBE FITTING, INTERNALLY SWAGED-FSC 4730

SAE AS 5973
FITTING ASSEMBLY, CROSS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI-FSC 4730

SAE AS 632C
HOSE ASSEMBLY, 3000 psi, PTFE, FLARED, 90° TO 90°, HEAVYWEIGHT-FSC 4720

SAE AS 640
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARED, STRAIGHT TO STRAIGHT

SAE AS 648B
(R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, STRAIGHT TO 45°

SAE AS 650B
(R) Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, 45 Degrees to 45 Degrees

SAE AS 654
Cable, Special Purpose, Electrical: Wire, Electrical (Ignition, High-Tension)

SAE AS 7110/10A
National Aerospace and Defense Contractors Accreditation Program Requirements for Foundry In-Process Welding of Castings

SAE AS 7234
Rivets, Blind, Corrosion Resistant Alloy 67Ni - 31Cu Procurement Specification For-FSC 5320; UNS N04405; Supersedes AMS 7234D

SAE AS 7365
Duct Assembly, Ground, Conditioned Air, Metallic Reinforced, Low Pressure, 350 Degrees F

SAE AS 7974/4
CABLE ASSEMBLY, EXTERNAL ELECTRIC POWER, AIRCRAFT, SINGLE-JACKETED 115/200 VOLT, 400 HERTZ-FSC 6150

SAE AS 8015B
Minimum Performance Standards for Parachute Assemblies and Components, Personnel

SAE AS 8027
Crew Member Oxygen Regulators, Demand

SAE AS 8040A
Heater, Aircraft Internal Combustion Heat Exchanger Type

SAE AS 8045
Minimum Performance Standard for Underwater Locating Devices (Acoustic) (Self- Powered)

SAE AS 81582/6
CONNECTOR, ADAPTER ASSEMBLY, UMBILICAL CABLE TO STORES INTERFACE LANYARD RELEASE-FSC 5935

SAE AS 81659/35
CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, CRIMP CONTACTS, (DUAL INSERT, TYPE II, CLASS 1, (-65°C TO +125°C), SERIES 2, SHELL DESIGNATOR A)-FSC 5935

SAE AS 81714/30
Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Sizes 20-3, 20-4, 20-5 Vertical Mounting with Integral Bracket, Series I-FSC 5940

SAE AS 85049/121A
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)-FSC 5935

SAE AS 85352
Inflator Assembly and Gage Elements, Pneumatic Pressure, Remote Control, Direct Reading-FSC 4920

SAE AS 85449/5
CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, FIRE RESISTANCE, LOW SMOKE DENSITY AND TOXICITY

SAE AS 8662
Knife, Hunting, Sheathed, Survival, Pilot′s-FSC 7340; Should Be Used Instead of MIL-K-8662E(1), Which Was Cancelled on 30 August 1999

SAE AS 9144A
(R) Gasket - Type XX Engine Accessory Drive-FSC 5330

SAE AS 91721A
(R) Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 KSI MIN .3750-24 UNF-3A

SAE AS 9312A
(R) STUD, SHOULDERED, STEPPED, HEX, WRENCHING, DRILLED, STEEL UNS G87400, CAD, PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3750-24 UNF-3A-FSC 5307

SAE AS 94A
Snap Ring, Non-Controllable Propeller Hub

SAE AS 9587A
(R) Bolt, Machine-Hexagon Head, Drilled 6 Holes, Full Shank, UNS S66286, 130 ksi Min, .4375-20 UNJF-3A

SAE AS 9599A
(R) BRACKET, ANGLE 90°, CADMIUM PLATED, ALLOY STEEL UNS G41300, .190 X .375 BOLT-FSC 5340

SAE AS 965B
Drive-Studded, Accessory, (203.2) 8.000 BC Round, Design Standard For

SAE AS 971B
Drive-Accessory, (254) 10.000 BC Round, QAD, Design Standard for

SAE AS 9761
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Titanium AMS 4967, .3125-24 UNJF-3A-FSC 5306

SAE AS 9786
Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .375-24 UNJF-3A-FSC 5306

SAE AS 9928A
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A

SAE JA1004
Software Supportability Program Standard

SAE MA 1508
Undercuts for Straight Screw Threads - Metric

SAE MA 2002A
Impulse Testing of Hydraulic Hose, Tubing and Fitting Assemblies

SAE MA 2036A
Cap Assembly, Pressure Seal, Flareless Tube, Metric-FSC 4730

SAE MA 2150/5
CLAMP, LOOP STYLE, WITH INSERT, HYDROCARBON FLUID RESISTANT, METRIC

SAE MA 2151/1
Clamp, Saddle Type, Cushioned, Hydrocarbon Fluid Resistant, Metric-FSC 5340

SAE MA 3304A
Bolt-Machine, Hex Head, Drilled, PD Shank, MJ Thread, AMS 6322, Cadmium Plate, Metric-FSC 5306

SAE MA 3449
Bolt, Spline Drive Extended Washer Head, Reduced Head, Retainer Locked, PD Shank, AMS 5708, Metric-FSC 5306

SAE MA 3520
Insert - Thin Wall, Short Self-Locking, 550 Degrees C, Silver Plated UNS N07718, MJ Thread, Metric-FSC 5340; UNS N07718

SAE MA 4187
BOLT, MACHINE, SPLINE DRIVE, SPECIAL EXTENDED WASHER, REDUCED HEAD, PD SHANK, AMS 5662, METRIC-FSC 5305; UNS N07718

SAE AIR 1069A
Crew Oxygen Requirements Up to a Maximum Altitude of 45,000 Ft.

SAE AIR 1087B
Aircraft Accessory Drag Torque During Engine Starts

SAE AIR 1266A
Fault Isolation in Environmental Control Systems of Commercial Transports

SAE AIR 1276A
Aircraft Flashtube Anticollision Lighting Systems

SAE AIR 1673A
Aircraft Cargo Door Opening/Sill Details for Ground Support Equipment Interface

SAE AIR 1939
Aircraft Engine Life Cycle Cost Guide

SAE AIR 4057A
Secondary Filters for Fluid System Reliability

SAE AIR 4077
Mechanical Switch Usage for Landing Gear Applications

SAE AIR 4151
Introduction to Starting Systems

SAE AIR 4358
Steering Effect of Tilted, Free-Swiveling Nose Gears

SAE AIR 4359
Effects of Hanging Loads (e.g., GOH) on ULD Performance

SAE AIR 4367A
(R) Aircraft Inflight Ice Detectors and Icing Rate Measuring Instruments

SAE AIR 4783
Glossary of Terms - Aircraft Ground Refueling

SAE AIR 4789B
(R) Aerospace Information Report on Evaluating Corrosion Testing of Electrical Connectors and Accessories for the Purpose of Qualification

SAE AIR 4905
Wheel Chocks

SAE AIR 5020
Time-Dependent In-Flight Thrust Determination

SAE AIR 5662
Method for Predicting Lateral Attenuation of Airplane Noise

SAE AIR 713A
Guideline for Determining, Presenting, and Substantiating Turbine Engine Starting and Motoring Characteristics,

SAE AIR 818D
Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards for

SAE AIR 825/11A
Closed-Cycle Protective Breathing Devices

SAE AIR 888B
Fine Wire Mesh for Filter Elements

SAE ARD 50083
Human Factors Issues Associated with Cockpit Display of Traffic Information (CDTI)

SAE ARP 1048B
(R) Instrument and Cockpit Illumination for General Aviation Aircraft

SAE ARP 1051B
Format, Text, and Numbering System for Preparing Specifications Covering Civil Aircraft Ground Support Equipment

SAE ARP 1536A
Abrasion Test Procedure for Chafe Guard

SAE ARP 1612A
Polyimide Printed Circuit Boards Fabrication of

SAE ARP 1971B
Aircraft Deicing Vehicle - Self-Propelled, Large and Small Capacity

SAE ARP 246C
Orientation of Engine Axis, Coordinate and Numbering Systems for Aircraft Gas Turbine Engines

SAE ARP 36103
Air Cargo Unit Load Devices - Center of Gravity Control Methods

SAE ARP 4101/4
Flight Deck Environment

SAE ARP 4101/8
Flight Deck Interior Doors for Transport Aircraft

SAE ARP 4153
Human Interface Criteria for Collision Avoidance Systems in Transport Aircraft

SAE ARP 4166
Cover, Shipping and Storage (Flexible, Reusable, Water- Vaporproof)

SAE ARP 4249
Bearing Corrosion Test Method

SAE ARP 4729
Document for 270 Voltage Direct Current (270 V DC) System

SAE ARP 484A
Spark Igniter Gap Types

SAE ARP 485A
Temperature Measuring Devices Nomenclature

SAE ARP 4925A
Aerospace Design and Installation of Commercial Transport Helicopter Hydraulic Systems

SAE ARP 4927
Integration Procedures for the Introduction of New Systems to the Cockpit

SAE ARP 5102
Fluid Fittings - Jump Size Limitations

SAE ARP 5289
Electronic Aeronautical Symbols

SAE ARP 5448/5
Plain Bearing No-Load Rotational Breakaway Torque Measurement

SAE ARP 5483/3
Rolling Element Bearing Axial and Radial Internal Clearance

SAE ARP 5497
Modification or Replacement of Components on Dynamically Certified Seat Systems

SAE ARP 5584
Document for Electric Power Management

SAE ARP 5589
Human Engineering Considerations for Design and Implementation of Perspective Flight Guidance Displays

SAE ARP 577D
(R) Emergency Placarding - Internal and External

SAE ARP 5898
Human Interface Criteria for Flight Deck Surface Operations Displays

SAE ARP 5916
Design Specification for Regional Aircraft Towbarless Tow Vehicle for Pushback and/or Maintenance Towing Operations

SAE ARP 5943
Snowplows and Hitches

SAE ARP 676
Lever Ends (Involute Serrations)

SAE ARP 826
Electrical Computing Resolvers

SAE ARP 863A
Universal Turnover Build-Up Stand for Small Propulsion Units Requiring Vertical Assembly

SAE ARP 892
D-C Starter-Generator, Engine, General Specification for,

SAE ARP 900A
Methods for Evaluating Cryogenic Filters

SAE ARP 949B
Turbine Engine Starting System Design Requirements

SAE AS 1014
FITTING END; ATTACHABLE, SWIVEL FLANGE, FLEXIBLE METAL HOSE - STRAIGHT, 45 DEGREES ELBOW AND 90 DEGREES ELBOW STYLES

SAE AS 115501 THRU AS 115550
Screw - Flat Fillister Head, .3125-24

SAE AS 115601 THRU AS 115650
Screw - Flat Fillister Head, Drilled Shank, .190-32

SAE AS 121851 THRU AS 121925
Pin, Straight, Headed - .500 Nom.

SAE AS 129293 THRU AS 129604
Stud - Straight, Drilled, .3125-18 X .3125-24-FSC 5307

SAE AS 14244
Clamp, Loop Type, Bonding, Metric-FSC 5340

SAE AS 1606
Gas Turbine Starter (Jet Fuel Starter) Specification

SAE AS 1638D
(R) HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, 90 DEGREES TO 90 DEGREES

SAE AS 16781
Fiber Optics Test Methods and Instrumentation-FSC 9999

SAE AS 17108A
(R) BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS AND MOTOR-GENERATORS, WIDE CARTRIDGE, TYPE II

SAE AS 18259
Installation of Window Anti-Icing, De-Greasing, and Washing Systems (General Specification for)

SAE AS 1863
Hose Assembly, Rubber, Flareless, Field Attachable Fitting, Straight to Straight

SAE AS 21941A
(R) BOLT, CLUSTER FITTING, DOUBLE PORT THROUGH, FLARELESS

SAE AS 21944A
(R) BODY, CLUSTER FITTING, TWO WAY, 180°, FLARELESS

SAE AS 22227A
(R) Bearing, Ball, Annular, Generator and Motor Generator

SAE AS 25183
CONNECTOR, PLUG, ELECTRIC, POTTING SEAL, SOLDER CONTACT, AN TYPE-FSC 5935

SAE AS 3073C
GASKET - 37 degrees FLARED TUBE FITTING, COPPER, AMS 4500

SAE AS 3082
Insert - CRES Helical Coil Fine Thread, Straight Stud Locking, 2.5 Dia Nom Length-FSC 5340

SAE AS 3091
Stud - Straight, Key Locked, CRES AMS 5731 .250-28 UNJF X .250-28 UNJF

SAE AS 3104
Bolt, Machine - Hexagon Head, PD Shank, CRES AMS 5731, .500-20 UNJF-3A-FSC 5306

SAE AS 3114
Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, CRES AMS 5731, .190-32 UNJF-3A

SAE AS 3117
Bolt, Machine-Hexagon Head, Drilled 6 Holes, PD Shank, CRES AMS 5731, .375-24 UNJF-3A

SAE AS 3147
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .190-32 UNJF-3A-FSC 5306

SAE AS 3151
BOLT, MACHINE- DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS 4967, .4375-20 UNJF - 3A

SAE AS 3223A
Cover - Engine Accessory Drive, Round, 5.000 Bolt Circle, AMS 4490-FSC 2995

SAE AS 3256B
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CRES, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A

SAE AS 3259
PIN - COTTER, CRES AMS 7211, METRIC SERIES-FSC 5315

SAE AS 3293A
GASKET - 37 DEGREES FLARED TUBE FITTING, COPPER, AMS 4500

SAE AS 39029/99
Contacts, Electrical Connector, Pin, Crimp Removable, Coaxial, Size 5 (for DOD-C-83527 Connectors)-FSC 5935

SAE AS 4108/2
T-BOLT, A-286, 1000°F BUSHING HEAD

SAE AS 4156A
Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification

SAE AS 4157A
Coupling Assemblies, Hydraulic, Self-Sealing, Quick Disconnect 5000 and 8000 Pounds per Square Inch, Gage

SAE AS 425C
Nomenclature and Abbreviations for Use on the Flight Deck

SAE AS 4502C
HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARED, 45° TO 45°

SAE AS 4504C
HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARED, 90° TO 90°

SAE AS 4510/2
Fittings, Weld to Beam Seal, Fluid Connection

SAE AS 452A
Oxygen Mask Assembly, Demand and Pressure Breathing, Crew-Reaffirmed Noncurrent October 2003

SAE AS 4541
Elbow, 45 Degrees, Beam Seal, Male 4000 psi, Hydraulic-FSC 4730

SAE AS 4574A
(R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Beam Seal, Straight to Straight-FSC 4720

SAE AS 4578A
(R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Beam Seal, 45 Degrees to 90 Degrees-FSC 4720

SAE AS 473C
Flange-Accessory, 10

SAE AS 4828
Technical Manual Development for Ground Support Equipment

SAE AS 5010
Fitting, Tee, External Swage, Hydraulic

SAE AS 516A
Adapter 10

SAE AS 522A
Flange Accessory 3.000 Pilot Diameter - QAD-Reaffirmed Noncurrent October 2001

SAE AS 5242
Fitting, Elbow, 45 Degree, Bulkhead, Flareless to Flared

SAE AS 5258/4
Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle, Low Profile

SAE AS 5258/7
Insulating Components, Molded, Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, T

SAE AS 5379
Valves, Safety, Cabin Air, General Specification for

SAE AS 5488
Regional Aircraft Towbar Attach Fitting Interface

SAE AS 56C
Lever Ends-Fuel and Power Control

SAE AS 5756/4
CABLE, ELECTRICAL, 600 VOLTS, PORTABLE, MULTICONDUCTOR, OZONE RESISTANT-FSC 6145; Amendment 1 - July 2004

SAE AS 631C
HOSE ASSEMBLY, 3000 psi, PTFE, FLARED, 45° TO 90°, HEAVYWEIGHT-FSC 4720

SAE AS 649B
(R) Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, Straight to 90 Degree

SAE AS 651B
(R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, 45° TO 90°

SAE AS 665
Tapered Axle Collar Dimensions

SAE AS 7106/5
National Aerospace and Defense Contractors Accreditation Program Self-Release Agreements - Requirements

SAE AS 7109/3A
(R) Nadcap Requirements for Diffusion Coating Processes

SAE AS 7113
National Aerospace and Defense Contractors Accreditation Program Requirements for Fastener Manufacturing

SAE AS 7365/1
PIN, FEMALE COUPLING

SAE AS 8009B
(R) Pressure Altimeter Systems

SAE AS 8044
Takeoff Performance Monitor (TOPM) System, Airplane, Minimum Performance Standard for

SAE AS 8054
AIRBORNE ENGINE VIBRATION MONITORING (EVM) SYSTEM, GUIDELINES FOR PERFORMANCE STANDARD FOR

SAE AS 81659/37
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, CRIMP CONTACTS, (TRIPLE INSERT, TYPE II, CLASS 1, (-65°C TO +125°C), SERIES 2, SHELL DESIGNATOR A)-FSC 5935

SAE AS 81714/25
Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Size 20-1, Series I-FSC 5940

SAE AS 81765/2
Insulating Components, Molded, Electrical, Heat Shrinkable Polychloroprene, Flexible, Crosslinked-FSC 5970

SAE AS 85049/131
CONNECTOR ACCESSORIES, FIBER OPTIC BACKSHELL, STRAIGHT, SELF-LOCKING CATEGORY 3B FOR MIL-DTL-38999 SERIES III & SAE AS5590/1 CONNECTORS-FSC 5935

SAE AS 85049/134
CONNECTOR ACCESSORIES, FIBER OPTIC BACKSHELLS FILLER PLUG, CATEGORY 7-FSC 5935

SAE AS 85049/135
CONNECTOR ACCESSORIES, FIBER OPTIC BACKSHELL, SPLIT, STRAIGHT, SELF-LOCKING CATEGORY 3B FOR MIL-DTL-38999 SERIES III AND AS5590/1 CONNECTORS

SAE AS 8581
Engine; Rocket, Solid Propellant 5 Second Duration, 4500 Pounds Thrust-FSC 2845; Should Be Used Instead of MIL-E-8581A(AS), Which Was Cancelled on 26 May 2000

SAE AS 90484
GASKET, FLANGE MOUNT, CONNECTOR, ELECTRIC-FSC 5935

SAE AS 90708
Ring, Retaining, External, Interlocking-FSC 5365

SAE AS 9231
Bracket, Angle, 90 Degree .190 X .375 Bolt-FSC 5340

SAE AS 9294A
(R) BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A-FSC 5306

SAE AS 9297A
(R) BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A-FSC 5306

SAE AS 9317B
(R) SCREW, MACHINE - HEXAGON HEAD, SLOTTED, FULL SHANK, ALLOY STEEL, UNS K14675, 135 KSI MIN, .2500-28 UNS-3A, NI - CAD. PLATE-FSC 5305

SAE AS 9376B
GASKET - METAL O-RING, .125 TUBE X .010 WALL, SILVER PLATED, CRES - UNS S32100-FSC 5330

SAE AS 9402A
(R) BOLT, TEE HEAD - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .5000-20 UNJF-3A

SAE AS 9457B
BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .5625-18 UNJF-3A

SAE AS 9521B
BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A

SAE AS 9531A
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A

SAE AS 9533A
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .4375-20 UNJF-3A

SAE AS 967B
Drive-Studded, Accessory, (254) 10.000 BC Round, Design Standard For

SAE AS 9687A
(R) BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKELCADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A

SAE AS 9760
Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Titanium AMS 4967, .250-28 UNJF-3A-FSC 5306

SAE AS 9771
Packing, Preformed - AMS 3650, Seal-FSC 5330

SAE AS 9821
Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, AMS 5643, .500-20 UNJF-3A

SAE MA 14489
CLAMP, LOOP, METAL, PLAIN, SUPPORT, AIRCRAFT, METRIC-FSC 5340

SAE MA 2006
Hydraulic Tubing - Qualification Test Requirements-Same as ISO/DIS 8574

SAE MA 2008
Radii-Tube Bend, Metric

SAE MA 2058B
(R) UNION, REDUCER/EXPANDER BULKHEAD, FLARELESS TUBE, METRIC

SAE MA 2115
Union, Flareless Tube or Boss-FSC 4730

SAE MA 2150/3
CLAMP, LOOP STYLE, CUSHIONED, WITH WEDGE, HIGH TEMPERATURE, METRIC

SAE MA 2155/5
Clamp, Rectangular Loop, Cushioned, with Wedge, High Temperature, Stainless Steel, Metric

SAE MA 2306
FITTING, ADAPTER, BULKHEAD, EXTERNAL THREAD BEAM SEAL TO INTEGRAL WELD RING, METRIC

SAE MA 2537
Groove Design, Metal C-Ring Gasket, Face Type Internal Pressure, Metric-FSC 5330

SAE MA 3351
NUT, SPLINE DRIVE - EXTENDED WASHER, CUPWASHER LOCK, UNS S66286, SILVER PLATE, MJ THREAD, METRIC-FSC 5310;

SAE MA 3394
Clip - Spring, Tension, Inner 6.7 mm Bolt Hole, AMS 5525, Metric-FSC 5340

SAE MA 3422
Nut, Plain Hex - UNS S66286, Silver Plate, MJ Thread, Metric-FSC 5310; UNS S66286

SAE MA 3424
Nut, Plain Hex - Thin, UNS S66286, Silver Plate, MJ Thread, Metric-FSC 5310; UNS S66286

SAE MA 3437
Spacer, Sleeve - for 5mm Bolt, AMS4901 or AMS4921, Metric-FSC 5365;

SAE MA 4039A
Washer, Key - 270 Degree Locking, Cres, UNS S32100, Metric-UNS S32100; FSC 5310

SAE MAP 4919
Fluid Connections, Fittings, Hex Width, Metric

SAE AIR 1090
Ignition Exciter Output Voltage Pulse Measurement Using a Pressurized Ball Gap

SAE AIR 1167
Environmental Criteria and Tests for Aerospace Ground Equipment in Support of Space Systems

SAE AIR 1169B
Bibliography of References Pertaining to The Effects of Oxygen on Ignition and Combustion of Materials

SAE AIR 1289A
Evaluation of Helicopter Turbine Engine Linear Vibration Environment

SAE AIR 1363A
Four Wheel Drive Aircraft Tow Tractors - Factors for Design Consideration

SAE AIR 1375C
Minimum Safety Requirements for Special Purpose Airline Ground Support Equipment

SAE AIR 1389A
(R) Regulatory Requirements Covering the Use of Breathing Oxygen in Aircraft

SAE AIR 1666A
(R) Performance Testing of Lubricant Filter Elements Utilized in Aircraft Power and Propulsion Lubrication Systems

SAE AIR 1667A
(R) Rotor Blade Electrothermal Ice Protection Design Considerations

SAE AIR 1706B
The Advanced Environmental Control System (AECS) Computer Program for Steady State Analysis and Preliminary System Sizing

SAE AIR 1828B
(R) Guide to Engine Lubrication System Monitoring

SAE AIR 1900A
(R) Guide to Temperature Monitoring in Aircraft Gas Turbine Engines

SAE AIR 1918
Comparison of Hydraulic System Cleanliness Procedures and Requirements for Ten Aerospace Companies-Reaffirmed Noncurrent December 2004

SAE AIR 1973A
Trademarks, Hydraulics System Component Manufacturers, Index of

SAE AIR 4065
Propeller/Propfan In-Flight Thrust Determination

SAE AIR 4096
Helicopter Engine Foreign Object Damage

SAE AIR 4281
Oil Systems for Helicopter Powerplants

SAE AIR 4365
400 Hz Connection Aircraft Electrical Maintenance Procedures

SAE AIR 4782
Hydrant Valve and Coupler Historical Background

SAE AIR 4986
Engine Electrostatic Gas Path Monitoring

SAE AIR 5065
Influence of Grain Flow on Bolt Integrity

SAE AIR 5080
Integration of Probabilistic Methods into the Design Process

SAE AIR 5122
ACRYLIC WINDOW TERMINOLOGY AND CRAZING ACCEPTANCE CRITERIA

SAE AIR 5314
Introduction to Generic Open Architecture (GOA) Family of Documents

SAE AIR 5320
Summary of Icing Simulation Test Facilities

SAE AIR 5433
Lubricating Characteristics and Typical Properties of Lubricants Used in Aviation Propulsion and Drive Systems

SAE AIR 5504
Aircraft Inflight Icing Terminology

SAE AIR 5575
Hot Stamp Wire Marking Concerns for Aerospace Vehicle Applications

SAE AIR 5683
High Performance 1553 Research and Development

SAE AIR 5883
Landing Gears Shock Struts Bearing Selection

SAE AIR 5892A
Nonvolatile Exhaust Particle Measurement Techniques-Contains Color;

SAE AIR 801
Oscillographic Method for Measuring Spark Energy of Capacitor Discharge Ignition Systems-Reaffirmed Noncurrent June 1994

SAE AIR 806B
Air Conditioning of Aircraft Cargo

SAE AIR 825/4A
Chemical Oxygen Systems

SAE AIR 885
Spark Calorimeter-Reaffirmed Noncurrent June 1994

SAE AIR 974A
Long-Term Storage of Missile Hydraulic Systems

SAE AIR 975A
Maintenance of Pitot- Static Systems of Transport Aircraft

SAE AIR 984C
Air Bleed Objective for Helicopter Turbine Engines

SAE AIR5615
Procedure for Determining the Dimensional Relationship of Rotating Components Coupled with Thrust Wires

SAE ARD 50002
Discussion of Standardization Concepts for Condition Monitoring and Performance Analysis Software

SAE ARD 50048
Human Modeling System User Requirements Survey

SAE ARD 5296
Requirements for the Avionics Architecture Description Language (AADL)

SAE ARD 5668
1760 Routing Protocol Requirements

SAE ARD 5906
Ice Shape Measurement and Comparison Techniques Workshop

SAE ARP 1134
Adapter Interface- Turbine Engine Blade Moment Weighing Scale

SAE ARP 1217A
Instrumentation Requirements for Turboshaft Engine Performance Measurements

SAE ARP 1334B
Ground Equipment Requirements for Compatibility with Aircraft Unit Load Devices

SAE ARP 1554C
Auto Transport Unit Load Device

SAE ARP 1785B
(R) Standard Codes for Outer Sleeving on Hose Assemblies

SAE ARP 1798
Portable Emergency Lighting Systems for Airline Crew Members

SAE ARP 1833A
Sealing Techniques for Missile Applications

SAE ARP 1926
Cure Monitor, Electrical Methods

SAE ARP 1927
Application of Direct Pressure to Resin in Curing of Epoxy and Addition Type Polyimides

SAE ARP 1987/1
Titles, SAE G-3B Subcommittee Documents, Selection Of

SAE ARP 4001A
Lavatory Smoke Detectors

SAE ARP 4101/6
Stowage of Flight Crew′s Survival Emergency and Miscellaneous Equipment

SAE ARP 4101/7
Flight Deck Escape Provisions for Transport Aircraft

SAE ARP 4205
Aerospace Fluid Power - Hydraulic Filter Elements - Method for Evaluating Dynamic Efficiency with Cyclic Flow

SAE ARP 4712
Hand-Held Cabin Fire Extinguishers Transport Aircraft

SAE ARP 4768A
(R) Automatic Test Equipment, Relays Not Fully Rated 25 Amperes or Greater

SAE ARP 4834
Aircraft Tire Retreading Practice - Bias and Radial

SAE ARP 488D
Exits and Their Operation - Air Transport Cabin Emergency

SAE ARP 499B
Passageway Door Operation

SAE ARP 5061
Guidelines for Testing and Support of Aerospace, Fiber Optic, Inter-Connect Systems

SAE ARP 5119
Location of and Display Symbology Requirements for Head-Down Electronic Flight Displays for Steep IMC Approaches

SAE ARP 5146
Assessment of Aircraft Wheel Sealing Systems

SAE ARP 5293
Safety Considerations for Lasers Projected in the Navigable Airspace

SAE ARP 5448/7
Plain Bearing Wear Measurement

SAE ARP 5448/9A
Plain Bearing Lined Inside Diameter Plug Gaging

SAE ARP 5482
Photometric Data Acquisition Procedures for Impact Test

SAE ARP 5903
Droplet Impingement and Ice Accretion Computer Codes

SAE ARP 700B
High Strength Elevated Temperature Bolting Practice

SAE ARP 716C
Gap Settings for Aircraft Piston Engine Spark Plugs

SAE ARP 794A
Airstream Deviation Instrument (ADI)

SAE ARP 906B
Glossary, Aircraft Engine Starting and Auxiliary Power Systems

SAE ARP 922A
Electroluminescence, Design Criteria and Recommendations for Use in Aerospace Vehicle Crew Station Areas

SAE AS 1046C
(R) Minimum Standard for Portable Gaseous, Oxygen Equipment

SAE AS 1225A
Oxygen System Fill/Check Valve

SAE AS 1248A
Minimum Standard for Gaseous Oxygen Pressure Reducers

SAE AS 1292
Sleeve, Hose Assembly, Chafe Guard, Butyrate Coil

SAE AS 13341
Process for Barrier Coating of Anti-Friction Bearings-FSC 3110; Should Be Used Instead of MIL-STD-1334B(1), Which Was Cancelled on 2 August 1999

SAE AS 139F
HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, 45 DEGREE TO 45 DEGREE

SAE AS 1426A APPENDIX II
Standard Galley System Specification Appendix II 20.0 Data Requirements and Procedures

SAE AS 14489
Clamp, Loop, Metal, Plain Support, Aircraft, Metric-FSC 5340

SAE AS 1491A
Interline Air Cargo Pallets

SAE AS 1495A
Shaft Nut and Keywasher Installation Dimensions for

SAE AS 1637D
HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, 45 DEGREES TO 90 DEGREES

SAE AS 1909C
(R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, STRAIGHT TO STRAIGHT

SAE AS 2001A
Aerospace Fluid Systems and Components - Pressure and Temperature Classifications-This Standard is Equivalent to MA2001 (ISO 6771) Except That Imperial Units are Used

SAE AS 20708/1
Synchro, Control Transformer, Type 11CT4E-FSC 5990; Should Be Used Instead of MIL-S-20708/1F, Which Was Cancelled on 15 September 1999

SAE AS 21940A
(R) BOLT, CLUSTER FITTING, DOUBLE PORT FLARELESS

SAE AS 24466
Bearing, Roller, Needle-Double Row, Heavy Duty, Track Roller, Type VI, Antifriction, Inch-FSC 3110

SAE AS 245B
Water Solution Type Hand Fire Extinguisher

SAE AS 25042
COVER, ELECTRICAL CONNECTOR; PLUG, AN TYPE-FSC 5935

SAE AS 27444A
Net, Cargo Tiedown, Pallets, HCU-7/E, HCU-15/C, HCU-11/C, and HCU-16/C

SAE AS 28B
Spark Plugs, Aircraft Engine

SAE AS 3092
STUD - STRAIGHT, KEY LOCKED, CRES AMS 5731 .3125-24 UNJF X .3125-24 UNJF

SAE AS 3149
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .3125-24 UNJF-3A-FSC 5306

SAE AS 3158
BOLT, MACHINE- DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS 4967, .3125-24, UNJF-3A

SAE AS 3159
BOLT, MACHINE- DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS 4967, .375-24, UNJF-3A

SAE AS 3242B
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A

SAE AS 3321C
STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .3125-18UNJC X .3125-24UNJF-FSC 5307

SAE AS 34041
Connectors, Receptacle, Electric, Jam Nut Mounting, Front Release, Crimp Contact, AN Type-FSC 5935

SAE AS 3406
Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, AMS 5708, .3125-24 UNJF-3A-FSC 5306

SAE AS 3407
Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, AMS 5708, .375-24 UNJF-3A-FSC 5306

SAE AS 34121A
Connectors, Receptacle, Electric, Wall Mounting, Front Release, Crimp Contact, AN Type - with Accessory Threads-FSC 5935; Should Be Used Instead of MS3412; Amendment 1 - November 2004

SAE AS 34201
ADAPTER, CABLE CLAMP TO CABLE, BUSHING, TELESCOPING-FSC 5935

SAE AS 3478C
NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F

SAE AS 3490
STUD-STEPPED, 1.5 DIA ENGAGEMENT, .375-16 UNJC-3A MOD X .3125-24 UNJF-3A (UNS S66286)-FSC 4730

SAE AS 35071
CONNECTOR, PLUG, ELECTRIC, SOLDER CONTACT, QUICK DISCONNECT, UTILITY-FSC 5935

SAE AS 3529
Bolt, Shear - Double Hex Head, Drilled Shank UNS S66286 - 160 ksi-FSC 5306

SAE AS 36101
Air Cargo Unit Load Devices - Load Distribution Model

SAE AS 38386/4
Catch Assembly, Air Duct Hose, Ground Cooling-FSC 4730

SAE AS 4006
Hose Assembly, Polytetrafluoroethylene, PTFE, Metal Braid, Medium Pressure, Beam Seal, Straight to Straight

SAE AS 404C
Electric Tachometer: Magnetic Drag (Indicator & Generator)

SAE AS 4075/1
Optical Implementation Relating to the High Speed Ring Bus (HSRB)

SAE AS 422A
Spark Igniter Outline Right Angle Flange Mounting

SAE AS 439A
Stall Warning Instrument (Turbine Powered Subsonic Aircraft)

SAE AS 4503C
Hose Assembly, Convoluted, Polytetrafluoroethylene, Metallic Reinforced Conductive, Flared, 45 Degrees to 90 Degrees

SAE AS 470C
Drive-Accessory, 10

SAE AS 4798B
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 90° MALE

SAE AS 4825
Gasket, Fitting End, 24 Degree Cone

SAE AS 4893
Generic Open Architecture (GOA) Framework

SAE AS 4972
Fitting, Tee, Weld Ring

SAE AS 5013
FITTING, ADAPTER, STRAIGHT FLARELESS, EXTERNAL SWAGE, HYDRAULIC

SAE AS 5017
Air Filling Valves

SAE AS 5104A
Plugs, Port Connection, Ring Locked, AS1300 Port, Installation and Removal of

SAE AS 5116C
Minimum Operational Performance Specification for Ground Ice Detection Systems

SAE AS 5134A
Aviation Distress Signal

SAE AS 5135
Desiccant Port and Desiccant Holder

SAE AS 5240
Fitting, Elbow, 90 Degree, Bulkhead, Flareless to Flared

SAE AS 5363
Electromechanical Power Controller/Relay, General Specification for

SAE AS 5382/1A
CABLE, FIBER OPTIC, MULTIMODE, 100/140/172 μm GRADED INDEX, HERMETIC COATED, TIGHT BUFFER

SAE AS 5391
Health and Usage Monitoring System Accelerometer Interface Specification

SAE AS 5423A
Hose Assembly, Lined Silicone, Heated, Flareless to Fixed Cavity, 125 psi, Potable Water-FSC 4720

SAE AS 5443A
WRENCHING ELEMENT, SPLINE DRIVE - DIMENSIONS FOR-FSC 5306

SAE AS 5756/3
CABLE, POWER, ELECTRICAL, 600 VOLTS, PORTABLE, MULTICONDUCTOR-FSC 6145; Amendment 1 - July 2004

SAE AS 5902
Installation of Externally Swaged Fittings

SAE AS 5977
FITTING ASSEMBLY, 90°, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI-FSC 4730

SAE AS 652B
(R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METAL BRAID, MEDIUM PRESSURE, FLARELESS, 90° TO 90°

SAE AS 692A
Igniter, Spark, Aeronautical Engine (High Tension)

SAE AS 7106/1
National Aerospace and Defense Contractors Accreditation Program Requirements for the Control of Deliverable Production Software

SAE AS 7110/11A
National Aerospace and Defense Contractors Accreditation Program Requirements for Gas Arc Fusion Spot Welding

SAE AS 7110/8D
Nadcap Requirements for Diffusion Welding

SAE AS 7112/1
National Aerospace and Defense Contractors Accreditation Program Hose Manufacturing Requirements

SAE AS 7119A
Nadcap Aerospace Standard for Electronics Printed Circuit Boards

SAE AS 791
Remote Servoed Air Data Instruments for Subsonic Aircraft-Reaffirmed Noncurrent July 2001

SAE AS 7928/12
TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TIN WHISKER, TYPE II, CLASS 1, (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE)

SAE AS 7974/2
CABLE ASSEMBLY, EXTERNAL POWER, AIRCRAFT 115/200 VOLT, 400 HERTZ POWER DISTRIBUTION FLIGHT LINE (FOR A/E 24A-166A)-FSC 6150

SAE AS 8001
Minimum Performance Standard for Bank & Pitch Instruments

SAE AS 8007
Minimum Safe Performance over Speed Warning Instruments

SAE AS 8008
Flight Director Equipment

SAE AS 8021
Minimum Performance Standard for Direction Instrument, Non-Magnetic (Gyroscopically Stabilized)

SAE AS 81659/65
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, CRIMP CONTACTS, (SINGLE INSERT, TYPE IV, CLASS 1, (-65°C TO +125°C), SERIES 2, SHELL DESIGNATOR A)-FSC 5935

SAE AS 81714/31
Terminal Junction System, Terminal Junction Blocks, Electronic, Modules, Feedback Type, Sizes 20-6, 20-7, 20-8 Horizontal Mounting with Integral Bracket, Series I-FSC 5940

SAE AS 832E
Air/Surface (Intermodal) General Purpose Containers

SAE AS 85049/74
CONNECTOR ACCESSORIES, ELECTRICAL, POTTING BOOT, CATEGORY 7 (FOR USE WITH MIL-C-85049/61 POTTING BOOT RING)

SAE AS 85075/1
Tie Down Assembly, Helicopter Blade CH-46 Helicopter-FSC 1730

SAE AS 85485/9
CABLE, ELECTRIC, FILTER LINE, COMPONENT WIRE, TIN-COATED COPPER CONDUCTOR, RADIO FREQUENCY, ABSORPTIVE, 150 DEGREES C, 600-VOLT-FSC 6145

SAE AS 85896
Ladder, Aircraft Maintenance, Aluminum, Three-Way Combination (Step, Straight and Extension), General Specification for

SAE AS 880
Propeller Shaft End - Flanged 4.250(107.95) Bolt Circle

SAE AS 8991
Gasket, Fuselage Light - Cover Screw-FSC 5330

SAE AS 91601B
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, BLACK OXIDE, STEEL, UNS G87400, 125 KSI MIN, .3750-24 UNF-3A-FSC 5306

SAE AS 9449A
R) SCREW, MACHINE - STEEL, DIFFUSED NICKELCADMIUM PLATED, HEXAGON HEAD UNS K14675, 195 KSI MIN, .1380-40 UNJF-3A-FSC 5305

SAE AS 9455B
BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A

SAE AS 9525B
BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .6250-18 UNJF-3A

SAE AS 9526B
BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .7500-16 UNJF-3A

SAE AS 9598A
(R) BRACKET, ANGLE 90°, CADMIUM PLATED, ALLOY STEEL UNS G41300, .190 X .312 BOLT-FSC 5340

SAE AS 959B
Drive - Studded, Accessory, 2.653 B.C. Square, Design Standard for

SAE AS 9631
Screw, Machine - Hexagon Head, PD Shank, Titanium AMS 4967, .138-40 UNJF-3A-FSC 5305

SAE AS 9638
Bolt, Machine - Hexagon Head, PD Shank, Titanium AMS 4967, .500-20 UNJF-3A

SAE AS 9796
Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, AMS 5643, .3125-24 UNJF-3A-FSC 5306

SAE AS 9894
Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, AMS 5616, .190-32 UNJF-3A-FSC 5306

SAE AS 9918
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .4375-20 UNJF-3A-FSC 5306

SAE AS 9933
Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS 6322, Cadmium Plated, .250-28 UNJF-3A-FSC 5306

SAE J2595
Performance Requirements for Sealed Beam Motor Vehicle Headlamps-Supersedes SAE J1383:12/1996

SAE MA 14298
CLAMP ASSEMBLY, CUSHIONED, METRIC-FSC 5340

SAE MA 1696A
Screw Threads, Metric Buttress - MJB Profile

SAE MA 2001B
Aerospace Fluid Systems and Components - Pressure and Temperature Classifications

SAE MA 2014A
FITTING END, ACORN FLARELESS DESIGN STANDARD, METRIC

SAE MA 2024
Flange Profiles, V-Coupling, Design Standard, Metric

SAE MA 2025B
(R) UNION, FLARELESS, NON-REDUCER, METRIC

SAE MA 2035B
(R) PLUG, FLARELESS TUBE, METRIC

SAE MA 2043B
(R) UNION, BULKHEAD, FLARELESS TUBE, METRIC

SAE MA 2150/4
CLAMP SUPPORT, LOOP CLAMP, METRIC

SAE MA 2155/1
Clamp, Rectangular Loop, Cushioned, with Wedge, Hydrocarbon Fluid Resistant, Aluminum, Metric

SAE MA 2515
Ring - Back-Up, Port Connection, AMS 3660, Metric-FSC 5330

SAE MA 3302A
Nut, Plain Hex - UNS G87400, Cadmium Plate, MJ Thread, Metric-FSC 5310

SAE MA 3423
Nut, Plain Hex - Drld, UNS S66286, Silver Plate, MJ Thread, Metric-FSC 5310; UNS S66286

SAE MA 3476
Bolt, Machine - Spline Extended Washer, Full Head, PD Shank, Long Thread, AMS 5662 - Metric-FSC 5306

SAE MA 4036
Rings, Retaining - Tapered Width, Uniform Thickness Corrosion Resistant, Procurement Specification For, Metric-FSC 5365

SAE MA 4368
Nut, Plain, Round - Spanner Wrenching, Shaft Mounted, UNS S66286, Procurement Specification for, Metric-UNS S66286; FSC 5310

SAE MAP 1201
Tolerances, Hexagon Bar, Machined Flat and Forged Wrenching Flat Sizes for Fluid Fittings, Metric

SAE AIR 1077
Metallic Seal Rings for High Temperature Reciprocating Hydraulic Service

SAE AIR 1091
High Voltage Pulse Generator

SAE AIR 1186
Installation and Use of Equilateral Triangle Cross-Section Hydraulic O-Ring Seal Backup Rings (Dyna-Baks)

SAE AIR 1262
Aircraft Fire Protection for Helicopter Gas Turbine Powerplant and Related Systems Installations

SAE AIR 1358A
Aerospace Information Report for Continuous Flow Oxygen Hose Disconnect Fittings

SAE AIR 1490B
Environmental Degradation of Textiles

SAE AIR 1589
Aircraft Damage Caused by Ground Support Equipment-Errata

SAE AIR 1600A
Animal Environment in Cargo Compartments

SAE AIR 1813A
The Coanda/Refraction Concept for Gas Turbine Engine Test Cell Noise Suppression

SAE AIR 1906
Estimation of One-Third- Octave-Band Lateral Attenuation of Sound from Jet-Propelled Airplanes

SAE AIR 1989A
Helicopter External Noise Estimation

SAE AIR 36106
Air Cargo Unit Load Devices - Use of Airworthiness Reference Documents

SAE AIR 4083A
Helicopter Power Assurance

SAE AIR 4271
Handbook of System Data Communications

SAE AIR 4286
Maintenance of Ground Support Equipment

SAE AIR 4298
Impulse Test Machine, Sine Wave, Equipment and Operation of

SAE AIR 4728
References, Spacecraft and Spacecraft Servicing, Fluid System Components (Abbreviations, Acronyms, Definitions, Applicable Documents and Environmental Conditions)

SAE AIR 4899
Cargo Compartments Maximum Package Size Calculation Methodology

SAE AIR 5317
A Guide to APU Health Management

SAE AIR 5354
History of the SAE A-10 Aircraft Oxygen Equipment Committee

SAE AIR 77
Spark Energy Measurements Using Oscilloscopic Methods-Inactive for New Design After May 01,1989

SAE AIR 860A
Aircraft Electrical Heating Systems

SAE AIR 951A
Spark Energy Measurement, Alternative Methods

SAE ARD 50013
Solid Rocket Booster Reliability Guidebook

SAE ARD 50047
Probabilistic Methods a Joint Industry/Government/Academia Assessment of Needs and Goals

SAE ARP 1153A
Method for Determining Relative Specific Gravity Polytetrafluoroethylene Tubing

SAE ARP 1173
Test Procedure to Measure the R.F. Shielding Characteristics of E.M.I. Gaskets

SAE ARP 1278
Oscilloscopic Method of Measuring Spark Energy

SAE ARP 1348A
Baggage/Cargo Trailer Requirements

SAE ARP 1409C
(R) Aircraft On Board Weight and Balance System Requirements

SAE ARP 1621B
ULD for Aircraft Transportation of Horses

SAE ARP 169A
Numbering of Aircraft Engine Cylinders

SAE ARP 1702A
Defining and Measuring Factors Affecting Helicopter Turbine Engine Power Available

SAE ARP 1821A
Aircraft Ground Flotation Analysis Methods

SAE ARP 1835
Preparation for Delivery, General Requirements for Hose Assemblies

SAE ARP 1902A
Bolt, Tee Head, Interface Surface, Dimensions for

SAE ARP 1987/2
Titles, Hose and Hose Assembly, SAE G-3D Subcommittee, Selection of

SAE ARP 368C
Spark Plug Thread Form Data (60 Degrees Thread Angle)

SAE ARP 373B
Propeller Shaft Torque Ratings

SAE ARP 4067
DESIGN OBJECTIVES FOR CRT DISPLAYS FOR PART 23 AIRCRAFT

SAE ARP 4101/9
Crew Safety Provisions for Cargo Aircraft

SAE ARP 4102/11C
(R) Airborne Windshear Systems

SAE ARP 4102/12A
Airborne Landing Guidance System for Transport Aircraft

SAE ARP 4102/5 SECTION III
Engine Controls by Electrical or Fiber Optic Signaling

SAE ARP 426A
Compass System Installations

SAE ARP 4277
Placard and Marking Standards for Operation of Inflatable Slides and Slide/Rafts

SAE ARP 433A
Liquid Oxygen Quantity Instruments

SAE ARP 457A
Ferrule- High Altitude Spark Plug Leads

SAE ARP 4767A
Automatic Test Equipment, Relays Fully Rated 25 Amperes or Greater

SAE ARP 4902A
Design and Operation of Aircraft Deicing Facilities

SAE ARP 4904
Capability Guidelines for Computer Controlled Test Equipment for Hydraulic Components

SAE ARP 4961
Weights, Tube Fitting, Estimating, Weighing and Maintaining, Procedure for

SAE ARP 504C
Ignition System Testing - Metering and Power Supplies

SAE ARP 506A
High Temperature Insulated Terminal Lugs

SAE ARP 5108
Human Interface Criteria for Terrain Separation Assurance Display Technology

SAE ARP 5149
Training Program Guidelines for Deicing/Anti-Icing of Aircraft on Ground

SAE ARP 5283
Nose Gear Towbarless Tow Vehicle Basic Test Requirements

SAE ARP 5403
Aircraft Crash Axes

SAE ARP 5448A
Plain Bearing Test Methods

SAE ARP 5483/1
Rolling Element Bearing No-Load Torque Test

SAE ARP 5485A
Endurance Time Tests for Aircraft Deicing/Anti-Icing Fluids SAE Type II, III, and IV

SAE ARP 570A
Designation of Direction of Rotation of Helicopter Rotors

SAE ARP 690
Standard Exposed Junction Thermocouple for Controlled Conduction Errors in Measurement of Air or Exhaust Gas Temperature

SAE ARP 719A
Gas Motor

SAE ARP 725A
(R) Evaluating Effectiveness of Filter Element Cleaning Methods

SAE ARP 748A
Gas Turbine Engine Power Take-Off Pad Requirements

SAE ARP 763
Accumulators, Ground, Hydropneumatic Pressure

SAE ARP 777
Gas Actuators (Linear and Vane Rotary Type)

SAE ARP 876E
Gas Turbine Jet Exhaust Noise Prediction

SAE ARP 907
Missile & Rocket Applications: Hose Assemblies, Flexible Metal, High Pressure And High Temperature

SAE ARP 921A
Flight Test Procedures for Static Pressure Systems Installed in Subsonic Transport Aircraft

SAE ARP 935A
Control Plan/Technical Construction File

SAE ARP1146C
Combination Evacuation Slide/Raft - Civil Air Transport

SAE AS 100003C
Gasket-Type XII, XIV-A, and XIV-B Engine Accessory Drive

SAE AS 100016 THRU AS 100025
Lockwire, Brass

SAE AS 115451 THRU AS 115500
SCREW, MACHINE - STEEL, FLAT FILLISTER HEAD, .250-28-FSC 5305

SAE AS 115951 THRU AS 116000A
(R) SCREW - FLAT FILLISTER DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3125-18 UNC - 3A-FSC 5305

SAE AS 116001 THRU AS 116050A
(R) SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3125-24 UNF-3A-FSC 5305

SAE AS 116961 THRU AS 117000A
Screw - Oval Fillister Drilled Head, .138-32

SAE AS 1188
Aircraft Tire Inflation-Deflation Equipment

SAE AS 121751 THRU AS 121800
Pin, Straight, Headed - 312 NOM.-FSC 5315

SAE AS 14114
Gyroscope, Displacement, Roll and Pitch (Hard Mounted)-FSC 6610; Should Be Used Instead of MS14114(AS), Which Was Cancelled on 09 August 1999

SAE AS 1421
Aerospace Selected Diameter - Pitch Combinations of Metric 60 Degree Screw Threads for Shaft or Bearing Retaining Screw Threads

SAE AS 14243
Clamp, Loop, Nylon, Metric-FSC 5340

SAE AS 14272
Clamp, Loop, Cushioned, Elongated, Metric-FSC 5340

SAE AS 14487
Clamp, Loop, Plastic, Wire Support, Metric-FSC 5340

SAE AS 151401 THRU AS 151700A
(R) STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3A-FSC 5307

SAE AS 151701 THRU AS 152000A
(R) STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .5000-13 UNS X .4375-20 UNF-3A-FSC 5307

SAE AS 152601 THRU AS 152900A
(R) STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .2500-20 UNS X .1900-32 UNF-3A-FSC 5307

SAE AS 156E
HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45° TO 45°, FLARED, LIGHTWEIGHT

SAE AS 1677C
General Requirements for Noncertified Cargo/Baggage Containers

SAE AS 17845
Shield for Use with MS90362 External Power Receptacles-FSC 5935

SAE AS 17852
Reducers, Oxygen Pressure-FSC 1660; Should Be Used Instead of MIL-R-17852(AS), Which Was Cancelled on 28 July 1999

SAE AS 1825B
Methodology of Calculating Aircraft Cargo Volumes

SAE AS 1910C
(R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, STRAIGHT TO 45°

SAE AS 1912C
(R) HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, 45 DEGREE TO 45 DEGREE

SAE AS 1B
Altitude Graphs Aircraft Reciprocating Engine Performance

SAE AS 20708/15
Synchro, Control Transformer, Type 15CT4C-FSC 5990; Should Be Used Instead of MIL-S-20708/15G, Which Was Cancelled on 15 September 1999

SAE AS 20708/2
Synchro, Control Transmitter, Type 11CX4E-FSC 5990; Should Be Used Instead of MIL-S-20708/2E, Which Was Cancelled on 15 September 1999

SAE AS 20708/66
Synchro, Torque Receiver Transmitter, Type 31TRX6A-FSC 5990; Should Be Used Instead of MIL-S-20708/66E, Which Was Cancelled on 15 September 1999

SAE AS 20708/7
Synchro, Control Transformer, Type 26V-11CT4D-FSC 5990; Should Be Used Instead of MIL-S-20708/7E, Which Was Cancelled on 15 September 1999

SAE AS 20708/9
Synchro, Control Differential Transmitter, Type 26V-11CDX4C-FSC 5990; Should Be Used Instead of MIL-S-20708/9E, Which Was Cancelled on 15 September 1999

SAE AS 21378
PLUGS AND CABLE ASSEMBLIES, EXTERNAL POWER, AIRCRAFT, 230/400 VOLT, 400 HERTZ-FSC 5935/6150

SAE AS 214
GENERATORS - 12 VOLT-No Replacement

SAE AS 21949
BOLT-CLUSTER FITTING SINGLE PORT-FLARE-FSC 1650

SAE AS 22805
Spray Kit, Self Pressurized-FSC 4940; Should Be Used Instead of MIL-S-22805, Which Was Cancelled on 30 August 1999

SAE AS 24122
WIRING HARNESS - EXTERNAL POWER, 115 VOLT AC, SINGLE PHASE-FSC 6150

SAE AS 25064
Conduit, Flexible, Radio Frequency Shielding-FSC 5975

SAE AS 25442
DIES, FOR MS25441, HYDRAULIC CRIMPING, TOOL (FOR USE WITH ALUMINUM WIRE TERMINALS)

SAE AS 26805
Compressor Units, Air/Gas, General Requirements for

SAE AS 29600/12
CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, PLUG (SERIES A)-FSC 5935

SAE AS 3000
PLUG, MACHINE THREAD - AMS 5646, METAL GASKET, REDUCED DIAMETER THREAD

SAE AS 3040A
Installation - Multiple Tube Detachable Cushion Clamp

SAE AS 3097
Insert - CRES Helical Coil Fine Thread, Locking (Low Friction Systems) 3 Dia Nom Length-FSC 5340

SAE AS 3118
Bolt, Machine-Hexagon Head, Drilled 6 Holes, PD Shank, CRES AMS 5731, .4375-20 UNJF-3A

SAE AS 31351
CONNECTOR, RECEPTACLE, ELECTRIC, DUMMY STOWAGE, WALL MOUNTING FLANGE, PUSH-PULL COUPLING (SERIES 1 AND 2 CONNECTORS)-FSC 5935

SAE AS 31441
CONNECTOR, RECEPTACLE, ELECTRIC, CRIMP TYPE, JAM NUT MOUNTING, PUSH-PULL, COUPLING, SERIES 2 (CLASS E AND J)-FSC 5935

SAE AS 3148
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .250-28 UNJF-3A-FSC 5306

SAE AS 31481
CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, LANYARD, PUSH-PULL COUPLING, SERIES 2 (CLASS E AND J)-FSC 5935; Amendment 1: 09/2004

SAE AS 3150
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967, .375-24 UNJF-3A-FSC 5306

SAE AS 3160
BOLT, MACHINE- DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS 4967, .4375-20, UNJF-3A

SAE AS 3250B
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CRES, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A

SAE AS 3254B
(R) Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, CRES, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A

SAE AS 3405
Bolt, Machine - Hexagon Head, Drilled 6 Holes, PD Shank, AMS 5708, .250-28 UNJF-3A-FSC 5306

SAE AS 34081
CONNECTORS, PLUG, ELECTRIC, 90° ASSEMBLY, CRIMP CONTACT, AN TYPE-FSC 5935

SAE AS 34511
Connectors, Receptacle, Electrical, Cable Connecting, Rear Release, Crimp Contact, AN Type-FSC 5935; Should be used Insted of MS3451

SAE AS 34541
Connectors, Receptacle, Electrical, Jam Nut Mounting, Rear Release Crimp Contact, AN Type-FSC 5935; Should Be Used Instead of MS3454

SAE AS 3586
Pin and Plug, Expansion, Kit Cres, 303, Long-FSC 5340

SAE AS 3587
Pin and Plug, Expansion, Kit Cres, 303, Short-FSC 5340

SAE AS 3589
Pin and Plug, Expansion, Kit Al Alloy 2024, Long-FSC 5340

SAE AS 39029/105
Contacts, Electrical Connector, Concentric Twinax, Socket, Shielded, Size 8 (for MIL-C-28840)-FSC 5935

SAE AS 39029/97
Contacts, Electrical Connector, Pin, Crimp Removable, Coaxial, Size 1 (for DOD-C-83527 Connectors)-FSC 5935

SAE AS 39029/98
Contacts, Electrical Connector, Socket, Crimp Removable, Coaxial, Size 1 (for DOD-C-83527 Connectors)-FSC 5935

SAE AS 400B
Cargo Compartment Fire Detection Instruments (Reciprocating Engine Powered Aircraft)

SAE AS 4011
HOSE ASSEMBLY, POLYETRAFLUOROETHYLENE, PTFE, METAL BRAID, MEDIUM PRESSURE, BEAM SEAL, 90° TO 90°

SAE AS 402B
Automatic Pilots

SAE AS 4041A
Air Mode General Purpose Containers

SAE AS 4074.1
LINEAR TOKEN PASSING MULTIPLEX DATA BUS

SAE AS 4113
Validation Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Bus Controllers

SAE AS 4115
Test Plan for the Digital Time Division Command/Response Multiplex Data Bus System

SAE AS 4116
Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Monitors

SAE AS 4117
Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Couplers, Terminators, and Data Bus Cables

SAE AS 4136A
CROSS, REDUCED BODY, FLARELESS-FSC 4730

SAE AS 4270
Validation Methods for Mil-Std-1760 Mission Stores

SAE AS 4310
Tee, Flared Tube, Internal Thread on Run, for Seal Ring

SAE AS 4311
Tee, Flared Tube, Internal Thread on Side, for Seal Ring

SAE AS 4353A
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 psi, HEAVYWEIGHT, BEAM SEAL, STRAIGHT TO 45°

SAE AS 4510/1
Fittings, Weld to 24 Degree Cone Flareless, Fluid Connection

SAE AS 4576A
(R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Beam Seal, Straight to 90 Degrees-FSC 4720

SAE AS 4582
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 Degree F, Titanium Fittings, Flareless, Straight to 90 Degree

SAE AS 4583
HOSE ASSEMBLY, PTFE, PARA-ARAMID REINFORCED, STANDARD DUTY, 4000 PSI, 275 °F, TITANIUM FITTINGS, FLARELESS, 45° TO 90°

SAE AS 4585
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 Degree F, Titanium Fittings, Flareless, 90 Degree to 90 Degreee

SAE AS 47A
Pump, Fuel, Mounting Pad and Drive

SAE AS 5072/2A
Coupling Assembly, .375 Diameter, Non-Locking Probe Style, Miniature Self-Sealing-Aligning, Self-Sealing Disconnect for Ethylene/Glycol/Water

SAE AS 519A
Drive Accessory 4.125 Pilot Diameter - QAD-Reaffirmed Noncurrent October 2001

SAE AS 5258/3
Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight, Low Profile

SAE AS 5258/5
Insulating Components, Molded, Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight, Low Profile, Miniature

SAE AS 5266
Fitting, Adapter, Straight, Flared, External Swage, Hydraulic

SAE AS 5267
Fitting, Adapter, Straight, Flareless, External Swage, Hydraulic

SAE AS 526A
Coupling - Sheet Metal Retainer - QAD-Reaffirmed Noncurrent October 2001

SAE AS 527A
Coupling - Forged Retainer - QAD-Reaffirmed Noncurrent October 2001

SAE AS 5377
Nut, Self-Locking, 0.7500 thru 1.5000 Thread Sizes, UNS S66286, 160,000 psi, 800 °F, UNJ Thread - Procurement Specification

SAE AS 5382/4A
CABLE, FIBER OPTIC, SINGLE-MODE, 4.6/125/450 um, HERMETIC COATED, TIGHT BUFFER-FSC 6010

SAE AS 5463A
HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARED, WELDED, 90 DEGREE TO 90 DEGREE

SAE AS 5625
Minimum Performance Standards for Static Electric Power Frequency Converters

SAE AS 5706
Test Plan/Procedure for AS5643/1 S400 Copper Media Interface Characteristics Over Extended Distances

SAE AS 5823A
Card-Compass Correction-FSC 6610

SAE AS 5927
BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TRACK ROLLER, SEALED, TYPE V, ANTI-FRICTION, CORROSION RESISTANT NITROGEN (CREN) STEEL, INCH-FSC 3110

SAE AS 5928
BEARING, ROLLER, NEEDLE, DOUBLE ROW, HEAVY DUTY, TRACK ROLLER, SEALED, TYPE VI, ANTI-FRICTION, CORROSION RESISTANT NITROGEN (CREN) STEEL, INCH-FSC 3110

SAE AS 5956C
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, 45° TO 90°

SAE AS 5962
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, STRAIGHT TO 45 DEGREES ELBOW-FSC 4720

SAE AS 6144
Sound and Thermal Insulation for Aircraft General Specification for the Installation of

SAE AS 7116/1
NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELECTROCHEMICAL MACHINING (ECM)

SAE AS 7116/2
NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELECTROCHEMICAL GRINDING (ECG)

SAE AS 7236
Rivets, Alloy, Corrosion and Heat Resistant 52Co-20Cr-10Ni-15W Solution Heat Treated Procurement Specification For-FSC 5320; UNS R30605; Supersedes AMS 7236C

SAE AS 7365/2
COUPLING, FEMALE, 12 INCH AIR DUCT

SAE AS 7365/3
COUPLING, MALE, 12 INCH AIR DUCT

SAE AS 7365/6
BAND, FEMALE COUPLING, 12 INCH AIR DUCT

SAE AS 8014
Minimum Performance Standard Stall Warning Equipment

SAE AS 8033
Nickel Cadmium Vented Rechargeable Aircraft Batteries (Non-Sealed, Maintainable Type)

SAE AS 8042
Manifold Pressure Instruments

SAE AS 8046
Minimum Performance Standard Angle of Attack Equipment

SAE AS 814A
Spark Igniter Outline .750-20 Thread Mounting

SAE AS 81582/8
CONNECTOR, ADAPTER ASSEMBLY, UMBILICAL CABLE TO STORES INTERFACE, LANYARD RELEASE-FSC 5935

SAE AS 81582/9
CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, CAPS, PROTECTIVE-FSC 5935

SAE AS 81659/69
CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, CRIMP CONTACTS, (DUAL INSERT, TYPE IV, CLASS 1, (-65°C TO +125°C), SERIES 2, SHELL DESIGNATOR A)-FSC 5935

SAE AS 81822/4
WIRE, ELECTRICAL, SOLDERLESS WRAP, POLYIMIDE COATING OVER EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE) INSULATION, SILVER COATED SOLID CONDUCTOR-FSC 6145

SAE AS 82B
Screw Thread Form, American National, Modified (National Round - NR)

SAE AS 85049/136
CONNECTOR ACCESSORIES, FIBER OPTIC BACKSHELL, SPLIT, 45°, SELF-LOCKING CATEGORY 3B FOR MIL-DTL- 38999 SERIES III AND AS5590/1 CONNECTORS

SAE  Standards : SAE - Aerospace Standards (AS) Page 6

>> Page 1 2 3 4 5 6 7 8 9