SAE Standards : SAE - Aerospace Standards (AS) Page 4
>> Page 1 2 3 4 5 6 7 8 9 
SAE AS 81044/6
Wire, Electric, Crosslinked Polyalkene Insulated, Tin-Coated Copper, Normal Weight, 600-Volt, 150 Degrees C-FSC 6145
SAE AS 85049/127A
CONNECTOR ACCESSORIES, ELECTRICAL,BUSHING STRIP CATEGORY 7
SAE AS 85049/54A
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, 45°, CATEGORY 4C (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)-FSC 5935
SAE AS 85049/75
CONNECTOR ACCESSORIES, ELECTRICAL, POTTING BOOT, CATEGORY 7 (FOR USE WITH MIL-C-85049/58 POTTING BOOT RING)
SAE AS 85421/12C
FITTING, ELBOW, 90°, BEAM SEAL, 3000/4000 PSI, MALE TO MALE
SAE AS 85485/12
CABLE, ELECTRIC, FILTER LINE, SHIELDED, JACKETED, RADIO FREQUENCY ABSORPTIVE, 150 DEGREES C, 600-VOLT-FSC 6145
SAE AS 91691A
(R) Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 KSI MIN .1900-32 UNF-3A
SAE AS 9228
Bracket, Angle, 90 Degree .190 Bolt-FSC 5340
SAE AS 9354
Clamp, Loop - Aluminum, .265 Hole
SAE AS 9460
RIVET, SOLID - 100° FLUSH HEAD, AMS 7235-FSC 5320
SAE AS 9844A
(R) PIN, STRAIGHT, HEADED, .1874 DIAMETER, UNS S41800-FSC 5315
SAE MA 1937
Nut, Hex, Free Running, Procurement Specification for, Metric
SAE MA 3344
Nut, Plain Hex - Thin, UNS S66286, MJ Thread, Metric-FSC 5310; UNS S66286
SAE AIR 2000E
(R) Aerospace Fluid System Standards, Metric, National and International
SAE AIR 5919
Alternatives to Cadmium Plating
SAE ARP 1256C
(R) Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines
SAE ARP 5256
Mixing Resins, Adhesives and Potting Compounds
SAE ARP 780B
Environmental Systems Schematic Symbols
SAE AS 117041 THRU AS 117080
Screw - Oval Fillister Drilled Head, .164-32-FSC 5305
SAE AS 1369B
FITTING, PLUG, FLARED TUBE, FOR SEAL RING-FSC 4730
SAE AS 1553A
Performance Standard for Tube Support Loop-Cushioned Clamp
SAE AS 21440
BEARING, ROLLER, NEEDLE, TRACK ROLLER,INTEGRAL STUD, SEALED, TYPE VIII,ANTIFRICTION, INCH-FSC 3110
SAE AS 22759/17
Wire, Electric, Fluoropolymer-Insulated, Extruded ETFE, Medium Weight, Silver-Coated High Strength Copper Alloy Conductor, 600-Volt, 150 Degrees C-FSC 6145
SAE AS 3167
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .190-32 UNJF-3A
SAE AS 3410A
Bolt, Tee Head - AMS 5662, Chamfered, .250-28UNJF-3A (Stress Rupture Resistant)-FSC 5306
SAE AS 3545
Insert, Screw Thread, Self-Locking, Locked in, Key Locked, Heavy-Duty, Self-Broaching Keys, UNS S66286-FSC 5340
SAE AS 39029/16
Contacts, Electrical Connectors, Sockets, Crimp Removable, (for Mil-C-81659 Series 4 Connectors)-FSC 5935
SAE AS 39029/8
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, (for Mil-C-26482 Series 2 and Mil-C-81703 Series 3 Connectors-FSC 5935
SAE AS 4076
Contractile Strain Ratio Testing of Titanium Hydraulic Tubing
SAE AS 4108/3
Eye Bolt, A-286, 1000 Degrees F-FSC 5306
SAE AS 4302
Tee Assembly, Flared Tube, Retained Nut on Run, for Seal Ring
SAE AS 4319B
FITTING, EXPANDER, ADAPTER, FLARED TUBE TO BOSS FOR SEAL RING-FSC 4730
SAE AS 4666A
Fitting, Elbow, 45 Degrees, Bulkhead, Short Flareless-FSC 4730
SAE AS 4864A
(R) FITTING, PLUG, PIPE, EXTERNAL THREAD, COUNTERSUNK HEX HEAD
SAE AS 5002C
FITTING, ELBOW, 90°, BEAM SEAL
SAE AS 5310A
FITTING END, BULKHEAD, SPHERICAL, 37° FLARED TUBE CONNECTION DESIGN STANDARD
SAE AS 5529
SLEEVE, FLARELESS TUBE FITTING, INTERNALLY SWAGED-FSC 4730
SAE AS 7106/2A
National Aerospace and Defense Contractors Accreditation Program Requirements for Corrective Action and Disposition System for Nonconforming Material
SAE AS 7473A
Bolts and Screws Roll Threaded Procurement Specification for-FSC 5306; UNS K00802,UNS K91505,UNS K91456,UNS S32100,UNS S34700
SAE AS 8006
Minimum Performance Standard for Pitot and Pitot-Static Tubes
SAE AS 8017B
Minimum Performance Standard for Anticollision Light Systems
SAE AS 8055
Minimum Performance Standard for Airborne Head Up Display (HUD)
SAE AS 85421/7A
FITTING ASSEMBLY, CROSS, BEAM SEAL, 3000/4000 PSI, 4 FEMALE ENDS
SAE AS 85449/4
CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, PTFE
SAE AS 85731
Fastener, Positive Locking, Electronic Equipment, General Specification For-FSC 5340; Amendment 1: 09/2004
SAE AS 8914A
(R) Bearing, Roller, Self-Aligning, Airframe, Antifriction-FSC 3110; Should Be Used Instead of MIL-B-8914B(3), Which Was Cancelled on 30 August 1999
SAE AS 9212A
(R) BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A
SAE AS 9454B
BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .3750-24 UNJF-3A
SAE AS 9806
Bolt, Machine - Hexagon Head, PD Shank, AMS 5643, .250-28 UNJF-3A
SAE MA 3445
PACKING, PREFORMED O-RING SEAL, FLUOROCARBON (MIL-R-83485, TYPE I), METRIC-FSC 5330
SAE AIR 1168/12
Spacecraft Thermal Balance
SAE AIR 1168/8
Aircraft Fuel Weight Penalty Due to Air Conditioning
SAE AIR 1277B
(R) Cooling of Military Avionic Equipment
SAE AIR 4071
Lubricants for Oxygen Use
SAE AIR 4094
Aircraft Flight Control Systems Descriptions
SAE AIR 4253A
Description of Actuation Systems for Aircraft with Fly-By-Wire Flight Control Systems
SAE AIR 4275
Jet Reference Fluid Study for Fuel Tank Sealants
SAE AIR 64B
Electrical and Electronic Equipment Cooling in Commercial Transports
SAE AIR 825/1
Introduction to Oxygen Equipment for Aircraft
SAE ARD 50055
Aircraft Electrical Systems
SAE ARP 1598A
Landing Gear System Development Plan
SAE ARP 4102/4
Flight Deck Alerting System (FAS)
SAE ARP 4107
Aerospace Glossary for Human Factors Engineers
SAE ARP 4163
Balancing Machines: Tooling Design Criteria
SAE ARP 4945A
Aerospace-Solenoid Valve, Hydraulic, Three Way, Two Position, Direct Acting
SAE ARP 4968
Installation Standard for Couplings
SAE ARP 5151
Safety Assessment of General Aviation Airplanes and Rotorcraft in Commercial Service
SAE ARP 6002
Marking; Standard Hose, Aircraft-FSC 4720; Should Be Used Instead of MIL-M-6002A, Which Was Cancelled on 1 November 1999
SAE ARP 9034
A Process Standard for the Storage, Retrieval and Use of Three-Dimensional Type Design Data
SAE AS 1006E
R) FITTING, CROSS, STANDARD AND REDUCER FLARELESS-FSC 4730
SAE AS 126587 THRU AS 126652A
(R) STUD - STRAIGHT, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .3750 - 16 NS X .3750 - 24 UNF-3A
SAE AS 1366A
ELBOW, 90°, FLARED TUBE BULKHEAD UNIVERSAL, FOR SEAL RING
SAE AS 1541A
Hose, Air Duct, Flexible, Helical Convoluted, Metallic Wire Supported (Covered), Self Extinguishing
SAE AS 155301 THRU AS 155600A
(R) STUD, STEPPED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3750-16 UNS X .3125-24 UNF-3A
SAE AS 21441A
Bearing, Roller, Needle, Track Roller, Integral Heavy Stud, Type IX, Antifriction, Inch-FSC 3110; Should Be Used Instead of MS21441B, Which Was Cancelled on 22 Novmeber 1999
SAE AS 3230A
Rivet - Tubular, Countersunk, AS 7232-FSC 5320
SAE AS 3248B
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A
SAE AS 3319C
STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .190-24UNJC X .190-32UNJF-FSC 5307
SAE AS 3563B
NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, EXTENDED WRENCH PAD, 160 KSI, 800 °F, UNS S66286-FSC 5310
SAE AS 39029/71
Contacts, Electrical Connector, Pin, Removable, Solderless Wrappost Termination (for MIL-C-38999 Series I, II, III and IV, MIL-C-24308, MIL-C-83733, and MIL-C-55302/69 Connectors)-FSC 5935
SAE AS 4211D
FITTING, CROSS, BEAM SEAL
SAE AS 4299A
Rings, Retaining - Spiral Wound, Uniform Section Corrosion and Heat Resistant, UNS S66286-FSC 5365
SAE AS 4304
Tee Assembly, Flared Tube, Retained Nut on Side, for Seal Ring
SAE AS 4308B
FITTING, BUSHING-SCREW THREAD EXPANDER FOR SEAL RING-FSC 4730
SAE AS 4318A
FITTING, ADAPTER, FLARED TUBE, .375 BULKHEAD TO BOSS FOR SEAL RING-FSC 4730
SAE AS 4350
Plug, Hex Head
SAE AS 4624B
Hose Assembly, Polytetrafluoroethylene, Para Aramid Reinforced, Heavy-Duty, 275 Degrees F, 3000 psi Flareless, Titanium Fittings, Including Jump Size, Straight to Straight-FSC 4720
SAE AS 4684B
Fitting Assembly, Elbow, 45 Degree, Flareless and Short Flareless, Reducer, Retained Nut
SAE AS 4690B
(R) FITTING, TEE, REDUCER, BULKHEAD ON SIDE, FLARELESS AND SHORT FLARELESS
SAE AS 4958
Performance, Nut, Self-Locking, Castellated, Prevailing Torque, UNJ 16 Pitch Thread Form-UNS G41300 AND UNS G43400
SAE AS 4976
Insert, Screw Thread, Non-Locking, UNS S66286, Locked In, Key Locked Procurement Specification For-FSC 5340
SAE AS 5167A
Fitting, Adapter, Flared, Air Pressure Gage
SAE AS 782
Clamp, Half Tube Support
SAE AS 8025A
Passenger Oxygen Mask
SAE AS 8029
Minimum Performance Standard for Fuel and Oil Quantity Indicating System Components
SAE AS 8047
Performance Standard for Cabin Crew Portable Protective Breathing Equipment for Use During Aircraft Emergencies
SAE AS 85049/105A
CONNECTORS, ACCESSORIES, COMPOSITE, RFI/EMI, ELECTRICAL, STRAIN RELIEF, 90°, SELF-LOCKING, CATEGORY 3C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)-FSC 5935
SAE AS 85049/115B
(R) CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
SAE AS 85049/59
Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For MIL-C-22992 Connectors, Classes C, J, and R)-Amendment 1: 08 2006
SAE AS 893B
Fitting, Tee, Standard and Reducer, Flareless Tube to Pipe on Side, External Thread
SAE AS 9283A
(R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A-FSC 5306
SAE AS 9453B
BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A
SAE AS 9505A
(R) BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A
SAE AS 9577
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, .375-24 UNJF-3A-FSC 5306
SAE AS 9677A
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A
SAE AS 9783
Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .190-32 UNJF-3A-FSC 5306
SAE MA 1943A
Nuts, Self-Locking, UNS N07001 730 Degrees C, 1100 MPa, and 1210 MPa Procurement Specification for, Metric-FSC 5310
SAE MA 2039A
PLUG, PORT - MJ THREAD, O-RING SEAL, AMS-5640, METRIC-FSC 4730
SAE MA 3338
BOLT, MACHINE-HEX HEAD, PD SHANK, LONG THREAD, AMS 5662, METRIC-FSC 5306
SAE MA 3375B
Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specification, Metric-FSC 5307
SAE AIR 1168/14
Spacecraft Life Support Systems
SAE AIR 1703
In-Flight Thrust Determination
SAE AIR 4004
Guide for Installation of Electrical Wire and Cable on Aircraft Landing Gear
SAE AIR 4922
Primary Flight Control Hydraulic Actuation System Interface Definition
SAE AIR 5278
Composite and Bonded Structure Engineers: Training Document
SAE AIR 5372
Information on Brake-By-Wire (BBW) Brake Control Systems
SAE AIR 825/12A
Oxygen System Integration and Performance Precautions
SAE ARP 1843A
Surface Preparation for Structural Adhesive Bonding Titanium Alloy Parts
SAE ARP 4058A
(R) Actuators: Mechanical, Geared Rotary, General Specification For
SAE ARP 4101/2
Pilot Visibility from the Flight Deck
SAE ARP 4146A
Coiled Tubing - Titanium Alloy, Hydraulic Applications, Aerospace
SAE ARP 4168A
Night Vision Goggle (NVG) Compatible Light Sources
SAE ARP 4493
Aerospace - Direct Drive Servovalves
SAE AS 1177A
Nondestructive Inspection Standards for Bolts and Screws
SAE AS 1250A
ELBOW, 90°, FLARED TUBE FOR SEAL RING
SAE AS 1291A
Sleeve, Hose Assembly, Chafe Guard, TFE or FEP
SAE AS 1294
Sleeve, Hose Assembly, Chafe Guard, Nylon Coil
SAE AS 150201 THRU AS 150300
Pin-Lock, Steel-FSC 5315
SAE AS 21231
Bearing, Plain, Self-Aligning, TFE Lined, Wide-FSC 3120; Should Be Used Instead of MS21231B, Which Was Cancelled on 03 May 1999
SAE AS 22759/28
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, POLYIMIDE COATED, SILVER-COATED COPPER CONDUCTOR, 600-VOLT
SAE AS 27649B
(R) Bearing, Ball, Airframe, Antifriction, Intermediate Duty-FSC 3110
SAE AS 3095
Insert - CRES Helical Coil Fine Thread, Locking (Low Friction Systems) 2 Dia Nom Length-FSC 5340
SAE AS 3108
Bolt, Machine-Hexagon Head, Drilled 1 Hole, PD Shank, CRES AMS 5731, .250-28 UNJF-3A
SAE AS 3166
UNION, TUBE - CRES AMS 5646, CONICAL END, CONNECTOR
SAE AS 3172
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .500-20 UNJF-3A
SAE AS 3228A
Rivet - Tubular, Countersunk, AS 7228-FSC 5320
SAE AS 3291
NUT, SELF-LOCKING, DOUBLE HEXAGON, AMS 5709-FSC 5310
SAE AS 3546A
Insert, Screw Thread, Self-Locking, Locked in, Key Locked, Extra Heavy-Duty, Self-Broaching Keys, UNS S66286
SAE AS 3566
Nut, Self-Locking, Castellated, Prevailing Torque, UNJ 16 Pitch Thread Form-FSC 5310
SAE AS 39029/33
Contacts, Electrical Connector, Pin, Crimp Removable (for MIL-C-81511 Series 1 and 2 Connectors)
SAE AS 39029/6
Contacts, Electrical Connector, Pin, Crimp Removable, Shielded, (For MIL-C-81511 Series 1 and 2 Connectors)-FSC 5935
SAE AS 39029/78
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, Size 16 (for MIL-C-38999 Series II and Mil-C24308 Connectors)-FSC 5935
SAE AS 4234
Fitting, Adapter, Beam Seal, Swivel Nut, External Swage Tube End, Hydraulic, 3000 psi
SAE AS 4347
Union Assembly, Double Retained Nut-FSC 4730
SAE AS 4842/2
Fittings, Flareless to Pipe Threaded, Fluid Connection
SAE AS 4891
Stud, Locked in, Key Locked, UNS S66286, Classification: 140 ksi Procurement Specification for-FSC 5307
SAE AS 5419
Cable, Thermocouple Extension, Shielded and Unshielded
SAE AS 5506/1
SAE Architecture Analysis and Design Language (AADL) Annex Volume 1: Annex A: Graphical AADL Notation, Annex C: AADL Meta-Model and Interchange Formats, Annex D: Language Compliance and Application Program Interface Annex E: Error Model Annex
SAE AS 5864
FITTING END, BULKHEAD, 24° CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD-FSC 4730
SAE AS 7110/4D
Nadcap Requirements for Resistance Welding (Spot, Seam, Projection)
SAE AS 7114/4
NADCAP Requirements for Nondestructive Testing Facility Radiography-Superseding AS 7100/1A
SAE AS 81714/7
Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size 20, Series I-FSC 5940
SAE AS 8243
Anti-Icing and Deicing-Defrosting Fluids-FSC 6850
SAE AS 85049/126-A1
Connector Accessories, Electrical, Strain Relief, 90° Self-Locking and Non-Self-Locking, Category 4C (For MIL-DTL-38999 Series III and IV Connectors)
SAE AS 85049/130A
(R) CONNECTOR ACCESSORIES, ELECTRICAL GASKETING MATERIAL, CONDUCTIVE/ NON-CONDUCTIVE, FLANGE MOUNT, CATEGORY 7-FSC 5935
SAE AS 9372B
GASKET - METAL O-RING, .062 TUBE X .006 WALL, SILVER PLATED, CRES - UNS S32100-FSC 5330
SAE AS 9466A
(R) Pin, Straight, Headed, .373 Diameter, Cres, UNS S66286
SAE AS 9496A
(R) BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .6250-18 UNJF-3A-FSC 5306
SAE AS 9551A
(R) BRACKET, FLAT, STEEL UNS G41300, CADMIUM PLATED-FSC 5340
SAE AS 9573A
(R) Screw, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Corrosion and Heat Resistant Steel, UNS S66286, 130 Ksi Min, .1640-36 UNJF-3A
SAE AS 970B
Drive-Accessory, (203.2) 8.000 BC Round, QAD, Design Standard for
SAE AS 9784
Bolt, Machine - Hexagon Head, Full Shank, AMS 5643, .250-28 UNJF-3A-FSC 5306
SAE AS 9845A
(R) PIN, STRAIGHT, HEADED, .2499 DIAMETER, UNS S41800-FSC 5315
SAE MA 2151
Clamp Assemblies, Saddle or Omega Style, Two Point Mount, Multiple Shapes, Metric
SAE MA 3399
Clamp - Tube Support, Spring Clips and PTFE Cushion Procurement Specification for-FSC 5340
SAE MAP 1670
Studs, Installation Practice for Interference Fit - Metric
SAE MAP 1753A
Hole Sizes, Recommended for Metric Fasteners on Propulsion Equipment
SAE AIR 1936A
Study of Wrenching Engagement on AS870C Double Hexagon (12 Point) Fasteners
SAE AIR 4093
Compendium of Gas Properties
SAE AIR 4766/1
Air Quality for Commercial Aircraft Cabin Particulate Contaminants
SAE AIR 5388
Unique Wheel and Brake Designs
SAE AIR 5444
Investigation of Whisker Formation on Tin Plated Conductors
SAE AIR 825/6
On Board Oxygen Generating Systems (Molecular Sieve)
SAE ARP 1111
Inspection of Worn Involute Splines
SAE ARP 1330C
Welding of Structures for Ground Support Equipment
SAE ARP 4024
Aircraft/Engine Fuel Pump Net Positive Suction Pressure Performance Test and Evaluation
SAE ARP 4162A
Balancing Machine Proving Rotors
SAE ARP 4418A
(R) Procedure for Sampling and Measurement of Engine and APU Generated Contaminants in Bleed Air Supplies from Aircraft Engines
SAE ARP 4553
Accumulator, Hydraulic, Cylindrical Aircraft, Self-Displacing
SAE ARP 4967A
(R) Night Vision Imaging Systems (NVIS) Integrally Illuminated Information Panels
SAE ARP 573D
Silver, Copper and Nickel Alloy Brazed Joints for Aerospace Propulsion Systems
SAE ARP 9005
Aerospace Guidance for Non-Deliverable Software
SAE AS 1295
SLEEVE, HOSE ASSEMBLY, CHAFE GUARD, NEOPRENE RUBBER
SAE AS 1338
Aerospace Metric 60 Degree Screw Thread Profile and Tolerance Classes
SAE AS 150301 THRU AS 150400
Pin-Lock, Brass
SAE AS 1508
Undercuts for Straight Screw Threads - Metric
SAE AS 1580B
(R) RING, WELD, 3000 psi, TITANIUM
SAE AS 1583B
(R) FITTING, TEE, INTEGRAL WELD RING, 3000 psi
SAE AS 158901 THRU AS 159200A
(R) STUD, STEPPED, NECKED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3A
SAE AS 18121
Ferrules, Outer, Insulated, Shield Terminating, Type II Two-Piece, Class I, for Shielded Cable-FSC 5940; Should Be Used Instead of MS18121G, Which Was Cancelled on 27 September 1999
SAE AS 22759/31
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, POLYIMIDE COATED, NICKEL-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT
SAE AS 24464A
(R) BEARING, ROLLER, NEEDLE-DOUBLE ROW, HEAVY DUTY, SELF-ALIGNING, TYPE IV, ANTIFRICTION, INCH-FSC 3110
SAE AS 25337
CIRCUIT BREAKER, AIRCRAFT TRIP-FREE TOGGLE, 5-50 AMP-FSC 5925
SAE AS 3126
PIN, EXPANSION - CRES, 416, LONG
SAE AS 3222B
Cover - Engine Accessory Drive, Square, 5.000 Bolt Circle, AMS 4490-FSC 2995
SAE AS 3241B
(R) Bolt, Machine-Double Hexagon Extended Washer Head, PD Shank, CRES, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A
SAE AS 3401
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .250-28 UNJF-3A-FSC 5306
SAE AS 34061
Connectors, Plug, Electric, Front Release, Crimp Contact, AN Type-FSC 5935
SAE AS 3416
Bolt, Machine - Hexagon Head, PD Shank, AMS 5662, .375-24UNJF-3A (Stress Rupture Resistant)-FSC 5306
SAE AS 3483A
(R) Nut, Self Locking, Hexagon, Regular Height, UNS S66286, Class: 125 ksi/800 Degrees F-UNS S66286; FSC 5310
SAE AS 3572
Insert, Screw Thread, Non-Locking, Locked in, Key Locked, Heavy-Duty, Self-Broaching Keys, UNS S66286-FSC 5340
SAE AS 39029/55
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26500(USAF) AND MIL-C-26518(USAF) CONNECTORS)-FSC 5935
SAE AS 39029/80
Contacts, Electrical Connector, Socket, Crimp Removable, Shielded (for MIL-C-28748/10 Connectors)-FSC 5935
SAE AS 39029/94
Contacts, Electrical Connector, Socket, Crimp Removable, (for DOD-C-83527, Connector)-FSC 5935
SAE AS 4688A
Fitting, Tee, Reducer, Flareless and Short Flareless-FSC 4730
SAE AS 5186
Fitting, Elbow, 45 Degrees, Pipe to Hose-FSC 4730; Supersedes AN844
SAE AS 5372
Fuse, Current Limiter Type, Aircraft
SAE AS 5422A
Hose Assembly, Lined Silicone, Heated, Fixed Cavity, 125 psi, Potable Water-FSC 4720
SAE AS 5506
ARCHITECTURE ANALYSIS & DESIGN LANGUAGE (AADL)
SAE AS 5692/2
ARC FAULT CIRCUIT BREAKER - AIRCRAFT, TRIP FREE, 1-20 AMP, TYPE I
SAE AS 5793
FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC-FSC 4730
SAE AS 5831
ASSEMBLED COUPLING, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, ENVELOPE DIMENSIONS
SAE AS 5878
Nut, Self-Locking, Nickel Alloy, UNS N07001, 1400 Degrees F, 180,000 psi, UNJ Thread Procurement Specification
SAE AS 625C
Hose Assembly, 3000 psi, PTFE, Flareless, 45 Degree to 90 Degree, Heavyweight
SAE AS 628C
Hose Assembly, 3000 psi,PTFE, Flared, Straight to 45 Degree, Heavyweight
SAE AS 7102/1
National Aerospace and Defense Contractors Accreditation Program Requirements for Brazing
SAE AS 7112
National Aerospace aand Defense Contractors Accreeditation Program; Requirements for Fluid System Components
SAE AS 7114/3
Nadcap Requirements for Nondestructive Testing Facility Ultrasonic Survey-Superseding AS 7100/1A
SAE AS 7325B
Gasket, Metal O-Ring Corrosion and Heat Resistant Steel Procurement Specification For-FSC 5330;
SAE AS 758B
Fittings - Installation in Straight Threaded Boss
SAE AS 8010C
Aviator?￠a??a?￠s Breathing Oxygen Purity Standard
SAE AS 81714/14
TERMINAL JUNCTION SYSTEM, RACK ASSEMBLY, TRACK, FEEDTHRU TYPE, LIGHT WEIGHT, SERIES I-FSC 5940
SAE AS 81714/27
Terminal Junction System, Terminal Junction Blocks, Sectional, Grounding Modules, Stud Type Mounting, Series I-FSC 5940
SAE AS 81822/6
WIRE, ELECTRICAL, SOLDERLESS WRAP, EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE) INSULATION, SILVER COATED SOLID CONDUCTOR-FSC 6145
SAE AS 85049/104A
CONNECTORS, ACCESSORIES, COMPOSITE, RFI/EMI, ELECTRICAL, STRAIN RELIEF, 45°, SELF-LOCKING, CATEGORY 3C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)-FSC 5935
SAE AS 85049/111B
(R) CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, MIL-DTL-5015 (SERIES I & II), AS81703 SERIES III, AND MIL-C-26482 SERIES II CONNECTORS)
SAE AS 85049/114B
(R) CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF-LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
SAE AS 9142B
Gasket - Metal O-Ring, .062 Tube X .006 Wall, Cres - UNS S32100-FSC 5330
SAE AS 9303A
(R) STUD, SHOULDERED, HEXAGON WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .1900-32 UNF-3A X .1900-32 UNF-3A-FSC 5307
SAE AS 9362A
(R) NUT, PLAIN, HEXAGON, CHECK - UNS S66286, 130 KSI MIN, SILVER PLATED-FSC 5310
SAE AS 9395
Backplate, Retaining Strap AMS 5510
SAE AS 9397A
(R) Bolt, Tee Head - Cadmium Plated, Steel, UNS G87400, 125 KSI MIN, Chamfered, .1900-32 UNJF-3A
SAE AS 9493A
(R) BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .4375-20 UNJF-3A-FSC 5306
SAE AS 9502A
(R) BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A
SAE AS 9522B
BOLT, MACHINE - HEXAGON HEAD, STEEL, CADMIUM PLATED, UNS G87400, 125 KSI MIN, .4375-20 UNJF-3A
SAE MA 3286B
(R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK, MJ THREAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 900 MPA MIN, METRIC-FSC 5306
SAE MA 3378C
Bolts and Screws, UNS N07001 Tensile Strength 1210 MPa, Thread and Fillet Radius Rolled Before Aging, Procurement Specification, Metric-UNS N07001; FSC 5306
SAE AIR 1191A
Performance of Low Pressure Ratio Ejectors for Engine Nacelle Cooling
SAE AIR 1390A
Convenient Location of Oxygen Masks for Both the Crew and Passengers of Aircraft
SAE AIR 1657B
(R) Handbook of Hydraulic Metric Calculations
SAE AIR 4204
Commercial Aircraft Auxiliary Power Unit Installations
SAE AIR 4250A
(R) Electronic Engine Control Specifications and Standards
SAE AIR 4894
Landing Gear Stability
SAE AIR 4938
Composite and Bonded Structure Technician/Specialist: Training Document
SAE AIR 5468A
Ultraviolet (UV) Lasers for Aerospace Wire Marking
SAE AIR 5479A
(R) Environmentally Compliant Processes for Landing Gear
SAE AIR 5490
Carbon Brake Contamination
SAE AIR 5885
Landing Gear Common Repairs
SAE AIR 790C
(R) Considerations on Ice Formation in Aircraft Fuel Systems
SAE AIR 81B
Hydrocarbon-Based Hydraulic Fluid Properties
SAE ARP 1322A
Overpressurization Release Devices
SAE ARP 1587B
Aircraft Gas Turbine Engine Health Management System Guide
SAE ARP 1595A
Aircraft Nosewheel Steering Systems
SAE ARP 1797A
Aircraft and Aircraft Engine Fuel Pump Low Lubricity Fluid Endurance Test
SAE ARP 1802A
Selection and Application of Polytetrafluoroethylene (PTFE or TFE) Backup Rings for Hydraulic and Pneumatic Fluid Power Applications
SAE ARP 2B
Horsepower Correction Formulae
SAE ARP 4032A
Human Engineering Considerations in the Application of Color to Electronic Aircraft Displays
SAE ARP 4101/5
Aircraft Circuit Breaker and Fuse Arrangement
SAE ARP 4102/6
Communications and Navigation Equipment
SAE ARP 4260
Photometric and Colorimetric Measurement Procedures for Airborne Flat Panel Displays
SAE ARP 4916
Masking and Cleaning of Epoxy and Polyester Matrix Thermosetting Composite Materials
SAE ARP 4991A
Core Restoration of Thermosetting Composite Components
SAE ARP 5481
Recommended Wheel Tie Bolt Preload Procedure
SAE ARP 5596A
Cargo Shoring Guidelines
SAE ARP 5905
Calibration and Acceptance of Icing Wind Tunnels
SAE ARP 813B
Maintainability Recommendations for Aircraft Wheel and Brake Design
SAE ARP 868C
Method-Pressure Drop Tests for Fuel System Components
SAE ARP 881E
(R) Lamps for Aircraft Lighting
SAE ARP 920A
Design and Installation of Pitot-Static Systems for Transport Aircraft
SAE AS 115401 THRU AS 115450
SCREW - FLAT FILLISTER HEAD, .190-32-FSC 5305
SAE AS 116901 THRU AS 116912
Screw - Oval Fillister Head, .112-40-FSC 5305
SAE AS 123751 THRU AS 123850B
(R) PIN, COTTER - CRES, UNS S30200, AS7210
SAE AS 125551 THRU AS 125700
Rivet - Universal Head, Mild Steel-FSC 5320
SAE AS 1584B
(R) FITTING, ELBOW, 90°, INTEGRAL WELD RING, 3000 psi
SAE AS 21938A
(R) BOLT, CLUSTER FITTING, SINGLE PORT FLARELESS
SAE AS 21943A
(R) BODY, CLUSTER FITTING, TWO WAY, 90°, FLARELESS
SAE AS 24651
ELBOW, TUBE - 90°, BULKHEAD, FLARELESS TUBE UNIVERSAL TO FLARED TUBE-FSC 4730; Should Be Used Instead of MS24651, Which Was Cancelled on 2 August 1999
SAE AS 25488
CONNECTOR, PLUG, ATTACHABLE EXTERNAL ELECTRIC POWER, AIRCRAFT, 28 VOLT DC, OPERATING POWER-FSC 5935
SAE AS 28431
Aerospace Signaling Torque Wrenches
SAE AS 28915B
(R) BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW TORQUE TUBE, AIRFRAME, ANTI-FRICTION, SEALED, TYPE IV-FSC 3110
SAE AS 3093
STUD - STRAIGHT, KEY LOCKED, CRES AMS 5731 .375-24 UNJF X .375-24 UNJF
SAE AS 39029/112
ELECTRICAL CONNECTOR, CONTACT BUSHING, WIRE BARREL
SAE AS 39029/69
Connector Contacts, Electrical Socket, Crimp Removable, for Mil-C-85028 (AS) Connectors-FSC 5935; Amendment 1 - December 2004
SAE AS 393B
Airspeed Tubes Electrically Heated
SAE AS 4230C
FITTING, ELBOW, 45°, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
SAE AS 4233C
FITTING, ELBOW, 90°, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
SAE AS 4251
Coupling Assemblies, Non-Locking Probe Style, Self-Aligning, Self-Sealing Disconnects
SAE AS 4401
SEPARABLE FITTINGS, PERMANENT FITTINGS, TUBING, FLUID SYSTEMS 8000 psi QUALIFICATION TEST STANDARD FOR
SAE AS 462
SHAFTS FOR BALL BEARING RETAINING SPANNER NUTS AND KEY WASHERS
SAE AS 4667
Elbow Assembly, 45 Degrees, Retained Nut, Short Flareless
SAE AS 4679B
Washer, Flat, Short Flareless-FSC 4730
SAE AS 4687C
Fitting Assembly, Elbow, 90 Degree, Flareless and Short Flareless, Reducer, Retained Nut
SAE AS 4696
Fitting, Sleeve, Flareless, Nonreducer and Reducer, Short Acorn to Weld Tube End-FSC 4730
SAE AS 4792
Water Conditioning Agents for Aqueous Magnetic Particle Inspection
SAE AS 4832
Gland Design: Nominal 3/8 in Cross Section for Custom Compression Type Seals
SAE AS 5004C
FITTING, TEE, BEAM SEAL, BULKHEAD ON SIDE
SAE AS 5166A
Fitting, Tee, Air Pressure Gage
SAE AS 5239
Fitting, Adapter, Bulkhead, Flareless to Flared-FSC 4730
SAE AS 5258
Insulating Components, Molded, Electrical, Heat Shrinkable, Connector and Cable Accessory, Sealing Strain Relief, General Specification For
SAE AS 5395
Health and Usage Monitoring System Data Interchange Specification
SAE AS 5439
Adapter Reducer, Beam Seal - Port Connection, Ring Locked Design, Installation and Removal of
SAE AS 586B
Wheel and Brake (Sand and Permanent Mold) Castings - Minimum Requirements for Aircraft Applications
SAE AS 6480A
Tie Down, Cargo, Aircraft, Type C-2
SAE AS 707B
Thermal Sensitive Inflation Pressure Release Devices for Tubeless Aircraft Wheels
SAE AS 7112/6
National Aerospace and Defense Contractors Accreditation Program Titanium 3Al-2.5V Alloy, Seamless Hydraulic Tubing Manufacturing Requirements
SAE AS 7118/3
Nadcap REQUIREMENTS FOR CORE PROCESSING
SAE AS 8003
Minimum Performance Standard for Automatic Pressure Altitude Reporting Code Generating Equipment
SAE AS 81714/21
Terminal Junction System, Terminal Junction Blocks, Electronic, In-Line Junctions, Integral Diode, Series I-FSC 5940
SAE AS 81714/24
Terminal Junction System, Terminal Junction Blocks, Sectional, Electronic, In-Line Junctions, Double, Integral Diode(s), Series I-FSC 5940
SAE AS 81714/6
Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size 22, Series I-FSC 5940
SAE AS 81714/69
TERMINAL JUNCTION SYSTEM, BLOCK REMOVAL TOOLS, SERIES II-FSC 5940
SAE AS 81822/13
WIRE, ELECTRICAL, SOLDERLESS WRAP, EXTRUDED ETHYLENE-TETRAFLUOROETHYLENE (ETFE) INSULATION, SILVER COATED SOLID CONDUCTOR-FSC 6145
SAE AS 85049/64
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, SPLIT, STRAIGHT, CATEGORY 4C (MIL-C-38999 SERIES I AND II CONNECTORS)-FSC 5935
SAE AS 8712
Valve; Air Relief, Low Pressure
SAE AS 9141B
Gasket - Metal O-Ring, .035 Tube X .006 Wall, Cres - UNS S32100-FSC 5330
SAE AS 9305A
(R) STUD, SHOULDERED, HEXAGON WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .2500-28 UNF-3A-FSC 5307
SAE AS 9353
Clamp, Loop - Aluminum, .204 Hole
SAE AS 9465A
(R) Pin, Straight, Headed, .311 Diameter, Cres, UNS S66286
SAE MA 2012B
(R) Port, Internal, Straight Thread, Fitting Connection, Design Standard, Metric
SAE MA 3347
Bolt, Machine-Hex Head-Full Shank, Long Thread, AMS 5731 Metric-FSC 5306
SAE MA 3377A
Bolts and Screws, Nickel Alloy UNS N07718, Tensile Strength 1275 MPa Procurement Specification, Metric-UNS N07718; FSC 5306
SAE MA 3442
Packing, Preformed - O-Ring Seal, AMS 7267, Metric-FSC 5330
SAE MA 4021
Ring, Retaining - Internal, Tapered, Type I, Class 1 AMS 5520, Metric-FSC 5365
SAE MA 4045
WASHER, CUP, LOCK - SPANNER NUT AMS 5646, METRIC
SAE MAP 749B
AIRCRAFT TURBINE ENGINE FUEL SYSTEM COMPONENT ENDURANCE TEST PROCEDURE (ROOM TEMPERATURE CONTAMINATED FUEL)
SAE AIR 1168/13
Spacecraft Equipment Environmental Control
SAE AIR 1539B
(R) Environmental Control System Contamination
SAE AIR 4015C
Icing Technology Bibliography
SAE AIR 4465
Design and Handling Guide Radio Frequency Absorptive Type Wire and Cables (Filter Line, MIL-C-85485)
SAE AIR 4487
Investigation of Silver Plated Conductor Corrosion (Red Plague)
SAE AIR 4498
Aus-Bay Quenching of 300M Steel
SAE AIR 4508
MIL-STD-1773 Users Handbook
SAE AIR 4713
Aerospace - Chlorinated Solvent Contamination of MIL-H-5606/MIL-H-83282 Vehicle Hydraulic Systems
SAE AIR 4762
Compilation of Freezing Brake Experience and Suggested Designs and Operating Procedures Required to Prevent Its Occurrence
SAE AIR 5120
Engine Monitoring System Reliability and Validity
SAE AIR 5271
A Guideline for Application of High-Density Fiber Optic Interconnects to Aerospace Platforms
SAE AIR5925
Measurement Uncertainty Applied to Cost-Effective Testing
SAE ARP 1974
Clamps, Support, Comparative Fatigue Strengths, Test Method
SAE ARP 4049
Cargo Restraint on Aircraft Passenger Seats - Main Passenger Cabin
SAE ARP 4101
Flight Deck Layout and Facilities
SAE ARP 4255
Electrical Actuation Systems for Aerospace and Other Applications
SAE ARP 4698
Guide for Choosing a Minimum Wall Thickness of Tubing for Use With Weld Fittings Coded for a Range of Wall Sizes
SAE ARP 4868
Application Programming Interface Requirements for the Presentation of Gas Turbine Engine Performance on Digital Computers
SAE ARP 4912B
Design Recommendations for Spare Seals in Landing Gear Shock Struts
SAE ARP 4943
Ground Support Equipment Hydraulic Systems, Design and Installation, Recommended Practices for
SAE ARP 5088A
Test Method for the Determination of Total Acidity in Polyol Ester and Diester Gas Turbine Lubricants by Automatic Potentiometric Titration
SAE ARP 5486
Air Cargo Pallets - Utilization Guidelines
SAE ARP 5571
Gas Turbine Engine Performance Presentation and Nomenclature for Digital Computers Using Object-Oriented Programming
SAE ARP 587B
Balancing Machines - Description and Evaluation Horizontal, Two-Plane, Soft-Bearing Type for Gas Turbine Rotors
SAE ARP 688A
Reusable Lock for Spanner Nuts
SAE AS 103A
Fitting Assembly, Cross, Flareless and Short Flareless, Reducer, Retained Nut
SAE AS 1293
Sleeve, Hose Assembly, Chafe Guard, TEE Coil
SAE AS 1561
Stud, Locked in - Ring, Straight, Installation and Removal of
SAE AS 158E
HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 90° TO 90°, FLARED, LIGHTWEIGHT
SAE AS 22759/15
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, FEP-PVF2, LIGHT WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT
SAE AS 24000
Fuse Holder, Block-Type, 1-, 2-, and 3-Pole, 1- to 30-Ampere, Aircraft-FSC 5920; Should Be Used Instead of MS24000F, Which Was Cancelled on 13 September 1999
SAE AS 24652
ELBOW, TUBE - 90°, BULKHEAD, FLARED TUBE, UNIVERSAL TO FLARELESS TUBE-FSC 4730; Should Be Used Instead of MS24652, Which Was Cancelled on 2 August 1999
SAE AS 3129
Plug, Expansion - CRES, 303, Long; Std and .010 Oversize Diameters-FSC 5315
SAE AS 3176
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CL TOL SHANK, AMS 5643, .3125-24, UNJF-3A
SAE AS 3262A
Nut, Self-Locking, Plate - 2 Lug, Floating, CBored, UNS S66286-FSC 5310; UNS S66286
SAE AS 3298
Cushion - Tube Clamp Support, PTFE, Inch
SAE AS 3413
Bolt, Machine - Hexagon Head, PD Shank AMS 5662, .190-32UNJF-3A (Stress Rupture Resistant)-FSC 5306
SAE AS 3480C
Nut, Self-Locking, Plate, One Lug, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F
SAE AS 39029/109
Contacts, Electrical Connector, Pin, Crimp Removable, Socket, Multiple Wires-FSC 5935
SAE AS 39029/23
Contacts, Electrical Connector, Pin, Crimp Removable, Sheilded, (For MIL-C-26482 Series 1 Connectors)-FSC 5935
SAE AS 405C
Fuel and Oil Quantity Instruments
SAE AS 4215
Fitting, Adapter, Beam Seal, External Thread, External Swage Tube End, Hydraulic, 3000 psi
SAE AS 4231C
FITTING, ELBOW, 45°, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
SAE AS 4305
Tee Assembly, Flared Tube, Adjustable End on Run, for Seal Ring
SAE AS 4499C
HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARED, STRAIGHT TO STRAIGHT
SAE AS 468C
Drive-Accessory, 5
SAE AS 4694A
Fitting Assembly, Cap, Hollow End, Acorn, Short Flareless
SAE AS 4726
Nuts, Self-Locking, UNS S66286 Classification: 220 ksi/850 Degrees F Procurement Specification-Superseding AS 1371; FSC 5310
SAE AS 50861/1
Wire, Electrical, Polyvinyl Chloride Insulated, Nylon Jacket, Tin-Coated Copper Conductor, 600-Volt, 105 Degrees C-FSC 6145
SAE AS 5420C
Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification
SAE AS 5649
Wire and Cable Marking Process, UV Laser
SAE AS 6399
Hose, Rubber, Wire-Wound, Synthetic, Ice Eliminating System-Should Be Used Instead of MIL-H-6399B, Which Was Cancelled on 1 July 1999
SAE AS 7118/2
Nadcap REQUIREMENTS FOR METAL BONDING
SAE AS 7210A
Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification for-UNS S30200; FSC 5315
SAE AS 7240
Washers, Spring Lock, Carbon Steel, Procurement Specification for-:1992
SAE AS 81044/13
Wire, Electric, Crosslinked Polyalkene Insulated, Silver-Coated High Strength Copper Alloy, Light Weight, 600-Volt, 150 Degrees C
SAE AS 81714/28
Terminal Junction System, Terminal Junction Blocks, Grounding Modules, Integral Bracket Mounting, Series I-FSC 5940
SAE AS 85049/65
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, SPLIT, 90°, CATEGORY 4C (MIL-C-38999 SERIES I AND II CONNECTORS)-FSC 5935
SAE AS 85052/4
Clamp Support - Loop Clamp-FSC 5340
SAE AS 85421/6A
FITTING, CROSS, BEAM SEAL, 3000/4000 PSI, MALE ENDS
SAE AS 85421/8A
FITTING, CROSS, REDUCER, BEAM SEAL 3000/4000 PSI, 4 MALE ENDS
SAE AS 895B
FITTING, ELBOW, 45°, STANDARD AND REDUCER FLARELESS TUBE TO PIPE, EXTERNAL THREAD
SAE AS 9204B
Gasket - Metal O-Ring, .094 Tube x .010 Wall, Cres - UNS S31200-FSC 5330
SAE AS 9304A
(R) STUD, SHOULDERED, STEPPED, HEX., WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .1900-32 UNF-3A X .2500-28 UNF-3A-FSC 5307
SAE MA 2093
Fitting End, Dimensions, Fluid Systems Port Connection, Metric-FSC 4730
SAE MA 3374A
Bolts and Screws, UNS S66286, Corrosion and Heat Resistant Steel, Procurement Specification, Metric-UNS S66286; FSC 5306
SAE AIR 1160C
Aircraft Engine and Accessory Drives and Flange Standards
SAE AIR 1184A
Capacitive Fuel Gauging System Accuracies
SAE AIR 1412B
(R) Designing for Long Life With Elastomers
SAE AIR 1678A
Uncertainty of In-Flight Thrust Determination
SAE AIR 1752A
Aircraft Nosewheel Steering/Centering Systems
SAE AIR 1826
Acoustical Considerations for Aircraft Environmental Control System Design
SAE AIR 1957
Heat Sinks for Airborne Vehicles
SAE AIR 5924
Guidelines for the Integration of Electronic Engine Control Systems with Transport Category Aircraft Systems
SAE AIR 5937
Information on Electric Brakes
SAE AIR 810C
Degradation Limits of Hydrocarbon-Based Hydraulic Fluids, Mil-H-5606, Mil-H-6083, Mil-H-83282 and Mil-H-46170 Used in Hydraulic Test Stands
SAE ARP 1084
Hydraulic External Leakage for In-Service Components
SAE ARP 1283A
Cargo Compartment Lighting for Transport Category Aircraft and Rotorcraft
SAE ARP 1382
Balancing Machine Tooling, Design Criteria for
SAE ARP 147E
(R) Environmental Control Systems Terminology
SAE ARP 1507A
Helicopter Engine/Airframe Interface Document and Checklist
SAE ARP 1532A
Aircraft Oxygen System Lines, Fabrication, Test and Installation
SAE ARP 1533A
Procedure for the Analysis and Evaluation of Gaseous Emissions from Aircraft Engines
SAE ARP 1575B
Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding Hand Applied Phosphoric Acid Anodizing
SAE ARP 1665A
Definition of Pressure Surge Test and Measurement Methods for Receiver Aircraft
SAE ARP 1907A
Automatic Braking Systems Requirements
SAE ARP 1928A
Torque Recommendations for Attaching Electrical Wiring Devices to Terminal Boards or Blocks, Studs, Posts, etc.
SAE ARP 217D
Testing of Airplane Installed Environmental Control Systems (ECS)
SAE ARP 219
Conducting Test of Hydraulic Components in Contamination Controlled System, Procedure and Method for
SAE ARP 4102/2
Automatic Braking System (ABS)
SAE ARP 4102/8A
Flight Deck Head-Up Displays
SAE ARP 4266
Hole Contour, Fluid Passage, Tube Fitting
SAE ARP 4285
Aerospace - Evaluation of Particulate Contamination in Hydraulic Fluid - Membrane Procedure
SAE ARP 4848
Flaring (Swaging) and Removal of Shank Nuts
SAE ARP 4900
Liquid Rocket Engine Reliability Certification
SAE ARP 498B
Design, Layout, Criteria - Plastic Integrally Lighted Panels
SAE ARP 5007A
Development Process - Aerospace Fly-By-Wire Actuation System
SAE ARP 5475
Abuse Load Testing for In-Seat Deployable Video Systems
SAE ARP 9107
Direct Delivery Authorization Guidance for Aerospace Companies
SAE ARP 958D
Electromagnetic Interference Measurement Antennas; Standard Calibration Method
SAE AS 107D
Surface Finish (RMS)-Reaffirmed Noncurrent May 2006
SAE AS 116913 THRU AS 116924A
(R) SCREW - OVAL FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS K00802, .1120-40 UNC - 2A
SAE AS 14241
Clamp, Loop Type, Cushioned Support, Metric-FSC 5340
SAE AS 15531
Digital Time Division Command/Response Multiplex Data Bus
SAE AS 17107A
(R) BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS AND MOTOR-GENERATORS, STANDARD LIGHT, TYPE I
SAE AS 17184A
(R) SCREW, EXTERNALLY RELIEVED BODY, CRES - (SYNCHRO)
SAE AS 1733D
Body, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type II
SAE AS 17983
Compass, Magnetic, Pilot′s Standby-FSC 6605; Should Be Used Instead of MS17983, Which Was Cancelled on 30 August 1999
SAE AS 1875
Boss, Low Pressure (500 psi) Standard Dimensions for
SAE AS 1914C
(R) HOSE ASSEMBLY, POLTETRAFLUOROETHYLENE, CRES REINFORCED, 400 DEGREES F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, 90 DEGREE TO 90 DEGREE
SAE AS 264E
Instrument and Cockpit Lighting for Commercial Transport Aircraft
SAE AS 3080
I NSERT - CRES HELICAL COIL FINE THREAD, STRAIGHT STUD LOCKING, 1.5 DIA NOM LENGTH-FSC 5340
SAE AS 3101
Bolt, Machine - Hexagon Head, PD Shank, CRES AMS 5731, .3125-24 UNJF-3A-FSC 5306
SAE AS 3221A
Cover - Engine Accessory Drive, Square, 2.653 Bolt Circle, AMS 4490-FSC 2995
SAE AS 3235B
(R) BOLT, TEE HEAD - CRES, UNS N07001, 165 KSI MIN, CHAMFERED, .3750-24 UNJF-3A
SAE AS 3247B
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A
SAE AS 3253B
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CRES, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A
SAE AS 3326
Nut, Self-Locking-Captive Washer, Steel-FSC 5310
SAE AS 36100A
Air Cargo Unit Load Devices - Performance Requirements and Test Parameters
SAE AS 39029/7
Contacts, Electrical Connector, Pin, Crimp Removable, Shielded (for Mil-C-26482 Series 2 and Mil-C-81703 Series 3 Connectors)-FSC 5935
SAE AS 396B
Bank and Pitch Instruments (Indicating Stabilized Type) (Gyroscopic Horizon, Attitude Gyro)-Reaffirmed Noncurrent July 2001
SAE AS 4098A
Hose Assembly, Polytetrafluoroethylene, Heavy Duty, Metallic Reinforced, 400 Degrees F, 5000 psi Hydraulic and Pneumatic
SAE AS 4324
Washer, Flared Tube Fitting Adjutable End, Design Standard
SAE AS 4327
Sleeve, Flared Tube Fitting
SAE AS 4473B
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, 45° TO 90°
SAE AS 4488
Tubular Assemblies, Fusion Welded, Inspection Processes and Acceptance Standards for
SAE AS 4546
HOSE, AIR DUCT, FLEXIBLE, SILICONE-COATED FABRIC, 1 TO -.5 psi, EXTERNAL NYLON HELIX, SELF-EXTINGUISHING-fsc 4720
SAE AS 4580
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 Degree F, Titanium Fittings, Flareless, Straight to Straight
SAE AS 4676A
Fitting, Tee, Bulkhead and Boss on Run, Short Flareless-FSC 4730
SAE AS 4683B
(R) FITTING, ELBOW, 45°, REDUCER, BULKHEAD, FLARELESS AND SHORT FLARELESS
SAE AS 4704B
Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Male to Straight Male
SAE AS 4751/1
COUPLING, SHEET METAL, 40 DEGREES V-BAND, WIDE, STANDARD LATCH-FSC 5342
SAE AS 4775A
Aircraft Maintenance Jacks - General Requirements
SAE AS 5163
Fitting, Connector, Multiple Fluid Pressure Line, 75 Degree-FSC 4730
SAE AS 5164A
Fitting, Connector, Multiple Fluid Pressure Line, 45°
SAE AS 5452A
Night Vision Goggles (NVG) Compatible Lighting for Civil Aircraft
SAE AS 5692/1
ARC FAULT CIRCUIT BREAKER, TRIP FREE, PUSH-PULL, FUSIBLE LINK DESIGN, 2 ? -15 AMPS, TYPE I
SAE AS 647B
(R) Hose Assembly, Polytetrafluoroethylene, Metal Braid, Medium Pressure, Flareless, Straight to Straight
SAE AS 666C
Cavity Design and O-Ring Selection for Static Seal Use in Aircraft Tubeless Tire Wheels
SAE AS 7092A
Fittings, Cargo Tiedown, Aircraft-FSC 1670; Should Be Used Instead of MIL-F-7092(2), Which Was Cancelled on 07 September 1999
SAE AS 7109/4A
(R) Nadcap Requirements for Stripping of Coated Material
SAE AS 81044/10
WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, SILVER-COATED HIGH STRENGTH COPPER ALLOY, MEDIUM WEIGHT, 600-VOLT, 150°C
SAE AS 81714/10
TERMINAL JUNCTION SYSTEM, RACK ASSEMBLY, TRACK, FEEDTHRU TYPE, SERIES I-FSC 5940
SAE AS 81714/15
TERMINAL JUNCTION SYSTEM, GROUNDING STUD, SERIES I-FSC 5940
SAE AS 81714/18
Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Size 20, Series I-FSC 5940
SAE AS 81714/8
Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size 16, Series I-FSC 5940
SAE AS 9733
Bolt, Machine - Double Hexagon, Extended Washer Head, PD Shank, CRES AMS 5643, .250-28 UNJF-3A-FSC 5306
SAE AS 9805
BOLT, MACHINE-HEXAGON HEAD, PD SHANK, AMS 5643, .190-32 UNJF-3A
SAE AS 9955
Packing, Preformed - AMS 3668,
SAE MA 3287
Bolt, Machine-Spline Extended Washer, PD Shank Long Thread, AMS5731, Metric-FSC 5306
SAE MA 3288
NUT, PLAIN HEX - UNS S66286, MJ THREAD, METRIC
SAE MA 4016
Ring, Retaining - External, Spiral Wound, Heavy & Medium Duty CRES, Metric-FSC 5365
SAE AIR 1392A
Oxygen System Maintenance Guide
SAE AIR 5273
Actuation System Failure Detection Methods
SAE AIR 5541
Recommended Actions When Disinfectants, De-icers, and Cleaners Come in Contact with Landing Gear Structure
SAE AIR 5696
Aerospace Fluid Power - FAA Regulatory History - Transport Airplane Hydraulic Systems
SAE AIR 825/13
Guide for Evaluating Combustion Hazards in Aircraft Oxygen Systems
SAE ARD 5708
Frequently Asked Questions About IEEE-1394b and SAE AS5643
SAE ARP 1161A
Crew Station Lighting - Commercial Aircraft
SAE ARP 1201C
(R) Tolerances, Hexagon Bar, Machined Flat and Forged Wrenching Flat Sizes for Fluid Fittings
SAE ARP 1341B
Determining Decarburization and Carburization in Finished Parts of Carbon and Low-Alloy Steels
SAE ARP 142B
Assembling of Studs in Aluminum and Magnesium
SAE ARP 1616A
Self-Sealing Breakaway Valves for Crash-Resistant Aircraft Fuel and Oil Systems
SAE ARP 1953A
ACCEPTANCE TEST PROCEDURES AND STANDARDS TO INSURE CLEAN FUEL SYSTEM COMPONENTS
SAE ARP 4005A
Selection and Application of Relays for Proper Performance
SAE ARP 4050
Balancing Machines - Description and Evaluation Vertical, Two-Plane, Hard-Bearing Type for Gas Turbine Rotors
SAE ARP 4169A
(R) Night Vision Goggle (NVG) Filters
SAE ARP 4715
Induction Hardening of Steel Components
SAE ARP 4822
Night Vision Imaging System (NVIS) Compatible Illuminated Pushbutton Switches and Indicators
SAE ARP 4895A
(R) Flight Control Actuators - Dynamic Seals, Collection of Duty Cycle Data
SAE ARP 4919
Fluid Connections, Fittings, Hex Width
SAE ARP 4977
Drying of Thermosetting Composite Materials
SAE ARP 503F
Emergency Evacuation Illumination
SAE ARP 5507
Aircraft Tire-to-Wheel Performance Characteristics
SAE ARP 594D
FUEL PUMP THERMAL SAFETY DESIGN
SAE ARP 599C
Aerospace - Dynamic Test Method for Determining the Relative Degree of Cleanliness of the Downstream Side of Filter Elements
SAE ARP 841A
Leads, Flexible, Shielded, High Energy Ignition
SAE ARP 953B
Stress Dome in Fasteners
SAE ARP 993C
Fluidic Technology
SAE ARP 997C
(R) Installation and Stowage Provisions for Emergency Equipment in the Transport Aircraft Passenger Cabin
SAE AS 1078
Fitting End - Flared Tube Connection, Extended Thread
SAE AS 1145B
Aircraft Brake Temperature Monitor Systems (BTMS)
SAE AS 116925 THRU AS 116960
Screw - Oval Fillister Head, .138-32
SAE AS 14169
CIRCULAR SPLINE AND ADAPTER DETAILS ENGINE DRIVEN ACCESSORIES-FSC 6115
SAE AS 1614C
Main Line Aircraft Tow Bar Attach Fitting Interface
SAE AS 162501 THRU AS 162800A
(R) STUD, STEPPED, DRILLED, NECKED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3A
SAE AS 1735C
Nut, Coupling, Rigid, Fixed Cavity, Threaded, Ferrule Type Tube Ends, Type II-FSC 4730
SAE AS 1969
Coupling Assembly, Self-Sealing, Quick Disconnect Fuel and Oil System Components
SAE AS 21942A
(R) BODY, CLUSTER FITTING, ONE WAY, FLARELESS
SAE AS 24463B
(R) BEARING, ROLLER, NEEDLE-SINGLE ROW, HEAVY DUTY, SELF-ALIGNING, TYPE III, ANTIFRICTION, INCH-FSC 3110
SAE AS 27166
Valve, Pressure Equalizing, Gaseous Products
SAE AS 3169
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .3125-24 UNJF-3A
SAE AS 3170
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, AMS 5643, .375-24 UNJF-3A
SAE AS 3234
Bolt, Tee Head - AMS 5708, Chamfered, .3125-24 UNJF-3A-FSC 5306
SAE AS 3415
Bolt, Machine - Hexagon Head, PD Shank, AMS 5662, .3125-24UNJF- 3A (Stress Rupture Resistant)-FSC 5306
SAE AS 3496
Gasket - Type XVI Engine Accessory Drive-FSC 5330
SAE AS 35051
Cover for Use with MS90362 external Power Receptacle-FSC 5935
SAE AS 3531
Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, Drilled Head, UNS S66286 - 160 ksi-FSC 5306
SAE AS 3585
Pin and Plug, Expansion, Kit Cres, 416, Short-FSC 5340
SAE AS 3588
Pin and Plug, Expansion, Kit Al Alloy 2024, Short-FSC 5340
SAE AS 39029/25A
R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-DTL-26482 SERIES 1 CONNECTORS)
SAE AS 39029/72
Contacts, Electrical Connector, Socket, Removable, Solderless Wrappost Termination (for MIL-C-38999 Series I, II, III, and IV, MIL-C-24308, and MIL-C-55302/68, /71, and /75 Connectors)-FSC 5935
SAE AS 4225
Fitting, Elbow, 90 Degree, Beam Seal, External Thread, External Swage Tube End, Hydraulic, 3000 psi
SAE AS 4232C
FITTING, ELBOW, 90°, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
SAE AS 4306
Tee Assembly, Flared Tube, Adjustable End on Side, for Seal Ring
SAE AS 4348
Adapter Assembly, Retained Nut to Boss
SAE AS 4506A
Bolts and Screws, Steel, UNS S66286 Tensile Strength 160 ksi, Procurement Specification-FSC 5306
SAE AS 4671A
Fitting, Tee, Short Flareless-FSC 4730
SAE AS 4691D
Fitting Assembly, Tee, Flareless and Short Flareless, Reducer, Retained Nut on Run
SAE AS 471C
Flange-Accessory, 5
SAE AS 4802B
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 45° FEMALE
SAE AS 4833
Aircraft New Tire Standard - Bias and Radial
SAE AS 5171
Washer, Flat, Fitting, Flared and Flareless
SAE AS 5229
PORT, INTERNAL STRAIGHT THREAD, AIR CONNECTION, DESIGN STANDARD
SAE AS 5389
Pallet Lift Truck and Container Fork Pocket Interface
SAE AS 5652
10 Megabit/sec Network Configuration Digital Time Division Command/Response Multiplex Data Bus
SAE AS 629C
Hose Assembly, 3000 psi, PTFE, Flared, Straight to 90 Degree, Heavyweight
SAE AS 7109/2A
(R) Nadcap Requirements for Vapor Deposited Coatings
SAE AS 7109/6A
(R) Nadcap Requirements for Plating of Coated Parts
SAE AS 7110/3D
Nadcap Requirements for Electron Beam Welding
SAE AS 7110/6D
Nadcap Requirements for Laser Welding
SAE AS 7112/4
National Aerospace and Defense Contractors Accreditation Program Requirements for Hose/Tube Assembly
SAE AS 7116/4
NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR LASER BEAM MACHINING (LBM)
SAE AS 7469
Bolts and Screws, UNS N07041 Nickel Alloy, Corrosion and Heat Resistant, 155 ksi, Procurement Specification-FSC 5306; Supersedes AMS 7469B
SAE AS 8004
Minimum Performance Standard for Turn and Slip Instrument
SAE AS 8019A
Airspeed Instruments
SAE AS 81714/22
Terminal Junction System, Terminal Junction Blocks, Electronic, In-Line Junction, Integral Resistor, Series I-FSC 5940
SAE AS 81714/23
Terminal Junction System, Terminal Junction Blocks, Electronic, In-Line Junctions, Integral Fuse, Series I
SAE AS 81714/26
Terminal Junction System, Terminal Junction Blocks, Sectional, Modules, Electronic, Feedback Type, Size 20-2, Series I-FSC 5940
SAE AS 81822/1
WIRE, ELECTRICAL, SOLDERLESS WRAP, POLYETHYLENE TEREPHTHALATE-POLYESTER LAMINATED TAPE INSULATION, SILVER COATED SOLID CONDUCTOR-FSC 6145
SAE AS 85049/120
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90 DEGREES SELF-LOCKING, CATEGORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)-FSC 5935
SAE AS 85049/124A-A1
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
SAE AS 85049/140
CONNECTOR ACCESSORIES, ELECTRICAL BOOTS, HEAT-SHRINKABLE, STRAIGHT, CATEGORY 9-FSC 4090
SAE AS 85485
Cable, Electric, Filter Line, Radio Frequency Absorptive-FSC 6145; Amendment 1 - December 2004
SAE AS 85731/2
FASTENER, ELECTRONIC EQUIPMENT, POSITIVE SELF-LOCKING, FORCE LIMITING-FSC 5340
SAE AS 91711A
(R) Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Black Oxide, Steel, UNS G87400, 125 KSI MIN .3125-24 UNF-3A
SAE AS 9284A
(R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A-FSC 5306
SAE AS 9398B
BOLT, TEE HEAD, CHAMFERED - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A
SAE AS 9433B
BOLT, TEE HEAD, CHAMFERED - CRES, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A
SAE AS 9520B
BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A
SAE AS 9532A
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A
SAE AS 9579A
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A
SAE AS 968C
Flange - Accessory, 10.000 BC Round, Design Standard for
SAE AS 9699A
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS N07001, 165 KSI MIN, .3750-24 UNJF-3A
SAE AS 9712
Screw, Machine - Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion & Heat Resistant Steel, .138-40 UNJF-3A-FSC 5306
SAE AS 9732
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Cres AMS 5643, .190-32 UNJF-3A-FSC 5306
SAE MA 2111C
Fitting Assembly, Adapter Ring Locked Port Connection to 8 Degrees 30' Beam Seal 28 000 kPa, Metric-FSC 4730
SAE MA 3365
Bolt, Machine - Hex Head, Drilled, Full Shank, Long Thread, AMS 5731, Metric-FSC 5306
SAE MA 3434
Packing, Preformed - O-Ring Seal, AMS 7273, Metric-FSC 5330
SAE MA 4040A
Washer, Key - Dual Locking Positions, Cres, UNS S32100, Metric-UNS S32100; FSC 5310
SAE AIR 1394A
Cabling Guidelines for Electromagnetic Compatibility
SAE AIR 1664A
AIRCRAFT FLEXIBLE TANKS GENERAL DESIGN AND INSTALLATION RECOMMENDATIONS
SAE AIR 1739A
Information on Antiskid Systems
SAE AIR 4023B
(R) Aircraft Turbine Fuel Contamination History and Endurance Test Requirements
SAE AIR 4092A
Investigation of PTFE
SAE AIR 4170A
Reticulated Polyurethane Foam Explosion Suppression Material for Fuel Systems and Dry Bays
SAE AIR 4548A
Real-Time Modeling Methods for Gas Turbine Engine Performance
SAE AIR 46B
Preparation and Use of Chromel-Alumel Thermocouples for Aircraft Gas Turbine Engines
SAE AIR 4766/2
Airborne Chemicals in Aircraft Cabins
SAE AIR 4982
Aerospace Fly-By-Light Actuation Systems
SAE AIR 5022
Reliability and Safety Process Integration
SAE AIR 5145
Directory of Databases Part I - Whole Body Anthropometry Surveys
SAE AIR 5396
Characterization of Aircraft Icing Conditions
SAE AIR 5601
A Guideline for Application of RF Photonics to Aerospace Platforms
SAE AIR 5648
Fuel Versus Oxygen: Evaluations and Considerations
SAE AIR 5693
Compatibility of PTFE Hose Assemblies With Typical Fluids Found in Aerospace Applications
SAE AIR 744B
Aerospace Auxiliary Power Sources
SAE ARP 1333A
Nondestructive Testing of Electron Beam Welded Joints in Titanium-Base Alloys
SAE ARP 1786B
(R) Wheel Roll on Rim Criteria for Aircraft Application
SAE ARP 4028
Aircraft/Engine Fuel Pump Two Phase (Slugging Flow) Inlet Performance Test and Evaluation
SAE ARP 4101/1
Seats and Restraint Systems for the Flight Deck
SAE ARP 4191C
Gas Turbine Engine Performance Presentation for Digital Computer Programs Using FORTRAN 77
SAE ARP 4955A
(R) Recommended Practice for Measurement of Static and Dynamic Characteristic Properties of Aircraft Tires
SAE ARP 510A
Moment Weight of Turbine and Compressor Rotor Blades
SAE ARP 5265
Minimum Operational and Maintenance Responsibilities for Aircraft Tire Usage
SAE ARP 5366
Autopilot, Flight Director, and Autothrust Systems
SAE ARP 5904
Airborne Icing Tankers
SAE ARP 5936
Landing Gear Storage
SAE ARP 9090
Requirements for Industry Standard e-Tool to Collaborate Quality Assurance Activities Among Customers and Suppliers
SAE AS 7112/6
National Aerospace and Defense Contractors Accreditation Program Titanium 3Al-2.5V Alloy, Seamless Hydraulic Tubing Manufacturing Requirements
SAE AS 7118/3
Nadcap REQUIREMENTS FOR CORE PROCESSING
SAE AS 8003
Minimum Performance Standard for Automatic Pressure Altitude Reporting Code Generating Equipment
SAE AS 81714/21
Terminal Junction System, Terminal Junction Blocks, Electronic, In-Line Junctions, Integral Diode, Series I-FSC 5940
SAE AS 81714/24
Terminal Junction System, Terminal Junction Blocks, Sectional, Electronic, In-Line Junctions, Double, Integral Diode(s), Series I-FSC 5940
SAE AS 81714/6
Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size 22, Series I-FSC 5940
SAE AS 81714/69
TERMINAL JUNCTION SYSTEM, BLOCK REMOVAL TOOLS, SERIES II-FSC 5940
SAE AS 81822/13
WIRE, ELECTRICAL, SOLDERLESS WRAP, EXTRUDED ETHYLENE-TETRAFLUOROETHYLENE (ETFE) INSULATION, SILVER COATED SOLID CONDUCTOR-FSC 6145
SAE AS 85049/64
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, SPLIT, STRAIGHT, CATEGORY 4C (MIL-C-38999 SERIES I AND II CONNECTORS)-FSC 5935
SAE AS 8712
Valve; Air Relief, Low Pressure
SAE AS 9141B
Gasket - Metal O-Ring, .035 Tube X .006 Wall, Cres - UNS S32100-FSC 5330
SAE AS 9305A
(R) STUD, SHOULDERED, HEXAGON WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .2500-28 UNF-3A-FSC 5307
SAE AS 9353
Clamp, Loop - Aluminum, .204 Hole
SAE AS 9465A
(R) Pin, Straight, Headed, .311 Diameter, Cres, UNS S66286
SAE MA 2012B
(R) Port, Internal, Straight Thread, Fitting Connection, Design Standard, Metric
SAE MA 3347
Bolt, Machine-Hex Head-Full Shank, Long Thread, AMS 5731 Metric-FSC 5306
SAE MA 3377A
Bolts and Screws, Nickel Alloy UNS N07718, Tensile Strength 1275 MPa Procurement Specification, Metric-UNS N07718; FSC 5306
SAE MA 3442
Packing, Preformed - O-Ring Seal, AMS 7267, Metric-FSC 5330
SAE MA 4021
Ring, Retaining - Internal, Tapered, Type I, Class 1 AMS 5520, Metric-FSC 5365
SAE MA 4045
WASHER, CUP, LOCK - SPANNER NUT AMS 5646, METRIC
SAE MAP 749B
AIRCRAFT TURBINE ENGINE FUEL SYSTEM COMPONENT ENDURANCE TEST PROCEDURE (ROOM TEMPERATURE CONTAMINATED FUEL)
SAE AIR 1168/13
Spacecraft Equipment Environmental Control
SAE AIR 1539B
(R) Environmental Control System Contamination
SAE AIR 4015C
Icing Technology Bibliography
SAE AIR 4465
Design and Handling Guide Radio Frequency Absorptive Type Wire and Cables (Filter Line, MIL-C-85485)
SAE AIR 4487
Investigation of Silver Plated Conductor Corrosion (Red Plague)
SAE AIR 4498
Aus-Bay Quenching of 300M Steel
SAE AIR 4508
MIL-STD-1773 Users Handbook
SAE AIR 4713
Aerospace - Chlorinated Solvent Contamination of MIL-H-5606/MIL-H-83282 Vehicle Hydraulic Systems
SAE AIR 4762
Compilation of Freezing Brake Experience and Suggested Designs and Operating Procedures Required to Prevent Its Occurrence
SAE AIR 5120
Engine Monitoring System Reliability and Validity
SAE AIR 5271
A Guideline for Application of High-Density Fiber Optic Interconnects to Aerospace Platforms
SAE AIR5925
Measurement Uncertainty Applied to Cost-Effective Testing
SAE ARP 1974
Clamps, Support, Comparative Fatigue Strengths, Test Method
SAE ARP 4049
Cargo Restraint on Aircraft Passenger Seats - Main Passenger Cabin
SAE ARP 4101
Flight Deck Layout and Facilities
SAE ARP 4255
Electrical Actuation Systems for Aerospace and Other Applications
SAE ARP 4698
Guide for Choosing a Minimum Wall Thickness of Tubing for Use With Weld Fittings Coded for a Range of Wall Sizes
SAE ARP 4868
Application Programming Interface Requirements for the Presentation of Gas Turbine Engine Performance on Digital Computers
SAE ARP 4912B
Design Recommendations for Spare Seals in Landing Gear Shock Struts
SAE ARP 4943
Ground Support Equipment Hydraulic Systems, Design and Installation, Recommended Practices for
SAE ARP 5088A
Test Method for the Determination of Total Acidity in Polyol Ester and Diester Gas Turbine Lubricants by Automatic Potentiometric Titration
SAE ARP 5486
Air Cargo Pallets - Utilization Guidelines
SAE ARP 5571
Gas Turbine Engine Performance Presentation and Nomenclature for Digital Computers Using Object-Oriented Programming
SAE ARP 587B
Balancing Machines - Description and Evaluation Horizontal, Two-Plane, Soft-Bearing Type for Gas Turbine Rotors
SAE ARP 688A
Reusable Lock for Spanner Nuts
SAE AS 103A
Fitting Assembly, Cross, Flareless and Short Flareless, Reducer, Retained Nut
SAE AS 1293
Sleeve, Hose Assembly, Chafe Guard, TEE Coil
SAE AS 1561
Stud, Locked in - Ring, Straight, Installation and Removal of
SAE AS 158E
HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 90° TO 90°, FLARED, LIGHTWEIGHT
SAE AS 22759/15
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, FEP-PVF2, LIGHT WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT
SAE AS 24000
Fuse Holder, Block-Type, 1-, 2-, and 3-Pole, 1- to 30-Ampere, Aircraft-FSC 5920; Should Be Used Instead of MS24000F, Which Was Cancelled on 13 September 1999
SAE AS 24652
ELBOW, TUBE - 90°, BULKHEAD, FLARED TUBE, UNIVERSAL TO FLARELESS TUBE-FSC 4730; Should Be Used Instead of MS24652, Which Was Cancelled on 2 August 1999
SAE AS 3129
Plug, Expansion - CRES, 303, Long; Std and .010 Oversize Diameters-FSC 5315
SAE AS 3176
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CL TOL SHANK, AMS 5643, .3125-24, UNJF-3A
SAE AS 3262A
Nut, Self-Locking, Plate - 2 Lug, Floating, CBored, UNS S66286-FSC 5310; UNS S66286
SAE AS 3298
Cushion - Tube Clamp Support, PTFE, Inch
SAE AS 3413
Bolt, Machine - Hexagon Head, PD Shank AMS 5662, .190-32UNJF-3A (Stress Rupture Resistant)-FSC 5306
SAE AS 3480C
Nut, Self-Locking, Plate, One Lug, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F
SAE AS 39029/109
Contacts, Electrical Connector, Pin, Crimp Removable, Socket, Multiple Wires-FSC 5935
SAE AS 39029/23
Contacts, Electrical Connector, Pin, Crimp Removable, Sheilded, (For MIL-C-26482 Series 1 Connectors)-FSC 5935
SAE AS 405C
Fuel and Oil Quantity Instruments
SAE AS 4215
Fitting, Adapter, Beam Seal, External Thread, External Swage Tube End, Hydraulic, 3000 psi
SAE AS 4231C
FITTING, ELBOW, 45°, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
SAE AS 4305
Tee Assembly, Flared Tube, Adjustable End on Run, for Seal Ring
SAE AS 4499C
HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARED, STRAIGHT TO STRAIGHT
SAE AS 468C
Drive-Accessory, 5
SAE AS 4694A
Fitting Assembly, Cap, Hollow End, Acorn, Short Flareless
SAE AS 4726
Nuts, Self-Locking, UNS S66286 Classification: 220 ksi/850 Degrees F Procurement Specification-Superseding AS 1371; FSC 5310
SAE AS 50861/1
Wire, Electrical, Polyvinyl Chloride Insulated, Nylon Jacket, Tin-Coated Copper Conductor, 600-Volt, 105 Degrees C-FSC 6145
SAE AS 5420C
Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification
SAE AS 5649
Wire and Cable Marking Process, UV Laser
SAE AS 6399
Hose, Rubber, Wire-Wound, Synthetic, Ice Eliminating System-Should Be Used Instead of MIL-H-6399B, Which Was Cancelled on 1 July 1999
SAE AS 7118/2
Nadcap REQUIREMENTS FOR METAL BONDING
SAE AS 7210A
Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification for-UNS S30200; FSC 5315
SAE AS 7240
Washers, Spring Lock, Carbon Steel, Procurement Specification for-:1992
SAE AS 81044/13
Wire, Electric, Crosslinked Polyalkene Insulated, Silver-Coated High Strength Copper Alloy, Light Weight, 600-Volt, 150 Degrees C
SAE AS 81714/28
Terminal Junction System, Terminal Junction Blocks, Grounding Modules, Integral Bracket Mounting, Series I-FSC 5940
SAE AS 85049/65
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, SPLIT, 90°, CATEGORY 4C (MIL-C-38999 SERIES I AND II CONNECTORS)-FSC 5935
SAE AS 85052/4
Clamp Support - Loop Clamp-FSC 5340
SAE AS 85421/6A
FITTING, CROSS, BEAM SEAL, 3000/4000 PSI, MALE ENDS
SAE AS 85421/8A
FITTING, CROSS, REDUCER, BEAM SEAL 3000/4000 PSI, 4 MALE ENDS
SAE AS 895B
FITTING, ELBOW, 45°, STANDARD AND REDUCER FLARELESS TUBE TO PIPE, EXTERNAL THREAD
SAE AS 9204B
Gasket - Metal O-Ring, .094 Tube x .010 Wall, Cres - UNS S31200-FSC 5330
SAE AS 9304A
(R) STUD, SHOULDERED, STEPPED, HEX., WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .1900-32 UNF-3A X .2500-28 UNF-3A-FSC 5307
SAE MA 2093
Fitting End, Dimensions, Fluid Systems Port Connection, Metric-FSC 4730
SAE MA 3374A
Bolts and Screws, UNS S66286, Corrosion and Heat Resistant Steel, Procurement Specification, Metric-UNS S66286; FSC 5306
SAE AIR 1160C
Aircraft Engine and Accessory Drives and Flange Standards
SAE AIR 1184A
Capacitive Fuel Gauging System Accuracies
SAE AIR 1412B
(R) Designing for Long Life With Elastomers
SAE AIR 1678A
Uncertainty of In-Flight Thrust Determination
SAE AIR 1752A
Aircraft Nosewheel Steering/Centering Systems
SAE AIR 1826
Acoustical Considerations for Aircraft Environmental Control System Design
SAE AIR 1957
Heat Sinks for Airborne Vehicles
SAE AIR 5924
Guidelines for the Integration of Electronic Engine Control Systems with Transport Category Aircraft Systems
SAE AIR 5937
Information on Electric Brakes
SAE AIR 810C
Degradation Limits of Hydrocarbon-Based Hydraulic Fluids, Mil-H-5606, Mil-H-6083, Mil-H-83282 and Mil-H-46170 Used in Hydraulic Test Stands
SAE ARP 1084
Hydraulic External Leakage for In-Service Components
SAE ARP 1283A
Cargo Compartment Lighting for Transport Category Aircraft and Rotorcraft
SAE ARP 1382
Balancing Machine Tooling, Design Criteria for
SAE ARP 147E
(R) Environmental Control Systems Terminology
SAE ARP 1507A
Helicopter Engine/Airframe Interface Document and Checklist
SAE ARP 1532A
Aircraft Oxygen System Lines, Fabrication, Test and Installation
SAE ARP 1533A
Procedure for the Analysis and Evaluation of Gaseous Emissions from Aircraft Engines
SAE ARP 1575B
Surface Preparation and Priming of Aluminum Alloy Parts for High Durability Structural Adhesive Bonding Hand Applied Phosphoric Acid Anodizing
SAE ARP 1665A
Definition of Pressure Surge Test and Measurement Methods for Receiver Aircraft
SAE ARP 1907A
Automatic Braking Systems Requirements
SAE ARP 1928A
Torque Recommendations for Attaching Electrical Wiring Devices to Terminal Boards or Blocks, Studs, Posts, etc.
SAE ARP 217D
Testing of Airplane Installed Environmental Control Systems (ECS)
SAE ARP 219
Conducting Test of Hydraulic Components in Contamination Controlled System, Procedure and Method for
SAE ARP 4102/2
Automatic Braking System (ABS)
SAE ARP 4102/8A
Flight Deck Head-Up Displays
SAE ARP 4266
Hole Contour, Fluid Passage, Tube Fitting
SAE ARP 4285
Aerospace - Evaluation of Particulate Contamination in Hydraulic Fluid - Membrane Procedure
SAE Standards : SAE - Aerospace Standards (AS) Page 4
>> Page 1 2 3 4 5 6 7 8 9
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
