SAE Standards : SAE - Aerospace Standards (AS) Page 3
>> Page 1 2 3 4 5 6 7 8 9 
SAE AS 4663A
Fitting, Union, Short Flareless-FSC 4730
SAE AS 4681A
Fitting, Union, Reducer/Expander Bulkhead, Flareless and Short Flareless-FSC 4730
SAE AS 4809C
FITTING ASSEMBLY, TEE, BEAM SEAL, RETAINED NUT ON RUN
SAE AS 5160A
Fitting, Bolt, Flared
SAE AS 5185
FITTING, ELBOW, 90???°, PIPE TO HOSE-FSC 4730; Supersedes AN842
SAE AS 8952A
Bearings, Roller, Rod End, Antifriction Self-Aligning-FSC 3110; Should Be Used Instead of MIL-B-8952B, Which Was Cancelled on 30 August 1999
SAE AS 9202B
Gasket - Metal O-Ring, .062 Tube X .010 Wall, Cres - UNS S31200-FSC 5330
SAE AS 9464C
(R) PIN, STRAIGHT, HEADED, .248 DIAMETER, CRES, UNS S66286-FSC 5315
SAE AS 9503A
(R) BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A
SAE MA 4189
Screw, Machine, 100 Degree CSK, Flat Head, Offset Cruciform Recess, Full Shank, UNS S66286, MJ Thread, Metric-FSC 5306
SAE AIR 1922
System Integration Factors That Affect Hydraulic Pump Life
SAE AIR 797E
(R) Hose Characteristics and Selection Chart
SAE ARP 5107B
Guidelines for Time-Limited-Dispatch (TLD) Analysis for Electronic Engine Control Systems
SAE AS 150801 THRU AS 151100A
(R) STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A-FSC 5307
SAE AS 27644B
(R) Bearing, Ball, Airframe, Anti-Friction, Double Row, Heavy Duty
SAE AS 3472A
Ring, Retaining - Internal, Spiral Wound Heavy and Medium Duty, UNS S66286-UNS S66286; FSC 5365
SAE AS 39029/27
Contacts, Electrical Connector, Socket, Crimp Removable, Sheilded, Size 12 (For MIL-C-38999 Series II Connectors)-FSC 5935
SAE AS 4459A
(R) Fittings, Tube, Fluid System (3000/4000 psig Rated Pressure), Externally Swaged, Specification for
SAE AS 4471B
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO 90???°
SAE AS 4873
GLAND DESIGN, ELASTOMERIC O-RING SEALS, STATIC RADIAL AND FACE 800 PSI MAXIMUM SERVICE
SAE AS 5003C
FITTING, TEE, BEAM SEAL, BULKHEAD ON RUN
SAE AS 5837
MALE FERRULE, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, BUTT WELDED-FSC 4730
SAE AS 7106
National Aerospace and Defense Contractors Accreditation Program Quality Program Requirements
SAE AS 7225
Rivets, Carbon Steel Procurement Specification for-FSC 5320
SAE AS 85049/23
Connector Accessories, Electrical, Backshell, Nonenvironmental, 45 Degrees, Shield Termination, Category 3A (for MIL-C-5015 Crimp, MIL-C-26482 Series 2, MIL-C-81703 Series 3, and MIL-C-83723 Series III Connectors)-FSC 5935
SAE AS 85049/63A
(R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90 DEGREE, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (MIL-DTL-38999 SERIES I AND II CONNECTORS)-FSC 5935
SAE AS 85421/14C
FITTING, ELBOW, 90???°, BEAM SEAL, 3000/4000 PSI, MALE TO FEMALE
SAE AS 9676A
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A
SAE MA 4872
Paint Stripping of Commercial Aircraft - Evaluation of Materials and Process
SAE AIR 4923
Bolts and Screws, Aerospace Engine - Materials, Procurement Specifications and Properties
SAE ARP 1923A
Qualification and Certification of Etch Inspectors
SAE ARP 743B
Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces by the Manual Particle Count Method
SAE AS 1012
FITTING END; ATTACHABLE, SWIVEL FEMALE 37 DEGREE MACHINED FLARE, FLEXIBLE METAL HOSE - STRAIGHT, 45 DEGREE ELBOW AND 90 DEGREE ELBOW STYLES
SAE AS 1895/18A
Flange, Male, Integral, Weld Ring, Type I Standard Profile
SAE AS 21447A
(R) BEARING, ROLLER, NEEDLE, TRACK ROLLER, CROWN RADIUSED O.D. INTEGRAL STUD, TYPE VII ANTIFRICTION, INCH
SAE AS 21925B
(R) ELBOW, 90 DEGREE UNIVERSAL, FLARELESS TUBE, HIGH PROFILE
SAE AS 3320C
STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .250-20UNJC X .250-28UNJF-FSC 5307
SAE AS 4131A
ELBOW, 90???°, REDUCED BODY, FLARELESS-FSC 4730
SAE AS 4444/1
Sleeve, Bite Type, 24???° Cone Flareless Fitting
SAE AS 4799A
(R) Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Female to Straight Female-FSC 4720
SAE AS 5187
Fitting, Elbow, 45 Degrees, Bulkhead, Hose-FSC 4730; Supersedes AN846
SAE AS 5970A
FITTING ASSEMBLY, ELBOW, 90???°, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
SAE AS 685C
Piloted Ring Seal Fluid Connection Bosses
SAE AS 7413
Coupling Assemblies, Quick Disconnect, Automatic Shutoff
SAE AS 7458
Studs, Steel, Low Alloy, Heat Resistant Normalized and Tempered, Roll Threaded 135 000 psi Tensile Strength-; FSC 5307
SAE AS 85049/28
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY 3B (FOR MIL-C-83733 CONNECTORS)-FSC 5935
SAE AS 85049/57A
(R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 45 DEGREE, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (MIL-DTL-38999 SERIES I AND II CONNECTORS)-FSC 5935
SAE AS 85449/3
CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, HIGH TEMPERATURE
SAE AS 9207A
(R) SCREW, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A-FSC 5305
SAE ARP 1515A
Threaded Fastener Protrusion Through Self-Locking Nuts
SAE ARP 1658B
Hose Assemblies, Installed, Visual Inspection Guide For
SAE ARP 4105B
Abbreviations, Acronyms, and Terms for Use on the Flight Deck
SAE ARP 9114
Direct Ship Guidance for Aerospace Companies-Contains Color
SAE AS 138F
HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO 90 DEGREE
SAE AS 2094
Test Methods for Tube-Fitting Assemblies
SAE AS 21234
Fitting, Tiedown, Cargo Ring(5,000 LB) and Seat Stud, Type I-FSC 1670
SAE AS 24462A
(R) BEARING, ROLLER, NEEDLE, SINGLE ROW, THIN SHELL, TYPE II, ANTIFRICTION-FSC 3110
SAE AS 24509A
(R) CIRCUIT BREAKER - AIRCRAFT, TRIP-FREE, TOGGLE, 5 THRU 15 AMP, TYPE I
SAE AS 3229A
RIVET - TUBULAR, UNIVERSAL, AS7228-FSC 5320
SAE AS 3543
Stud, Locked in, Key Locked, UNS S66286, 140 ksi/1200 Degrees F, Lightweight, Self-Broaching Keys-FSC 5340
SAE AS 4137A
ELBOW, 45???°, SWIVEL, REDUCED BODY, FLARELESS-FSC 4730
SAE AS 4461A
Assembly and Soldering Criteria for High Quality/High Reliability Soldered Wire and Cable Termination in Aerospace Vehicles
SAE AS 4678B
Nut, Bulkhead, Short Flareless
SAE AS 5191
Fitting, Elbow, 45 Degrees, Internal Straight Thread Port-FSC 4730
SAE AS 7103A
National Aerospace and Defense Contractors Accreditation Program (NADCAP) Requirements for Accreditation of Pass Through Distributors
SAE AS 7109/1A
(R) Nadcap Requirements for Thermal Spray
SAE AS 7110/1D
Nadcap Requirements for Brazing (Torch and Induction)
SAE AS 85049/4A
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, SET-UP, CATEGORY 1A (FOR MIL-C-22992 CONNECTORS, CLASSES C, J, AND R)-FSC 5935
SAE AS 85052
Clamp, Loop, Cushion, General Specification for
SAE AS 9219B
BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A-FSC 5306
SAE AS 9316A
(R) SCREW, MACHINE - HEXAGON HEAD, SLOTTED, FULL SHANK, ALLOY STEEL, UNS K14675, 135 KSI MIN, .1900-32 UNS-3A-FSC 5305
SAE AS 931B
(R) Fitting, Adapter, Union, Flareless to Boss
SAE AS 9392
Cushion, Loop Clamp - Multiple, 3-Tube, AMS 3303
SAE AS 9463A
(R) Pin, Straight, Headed, .186 Diameter, CRES, UNS S66286
SAE AS 9596A
(R) BRACKET, ANGLE, 90 DEGREES, CADMIUM PLATED, STEEL UNS G41300, .190 BOLT-FSC 5340
SAE AS 962A
Flange - Accessory, 5.000 BC Square, Design Standard for
SAE JA1002
Software Reliability Program Standard
SAE AIR 1388B
Service Damage Limits for Aircraft Hydraulic Tubing
SAE ARP 4048
Balancing Machines - Description and Evaluation Horizontal, Two-Plane, Hard-Bearing Type for Gas Turbine Rotors
SAE AS 121601 THRU AS 121650
Pin, Straight, Headed - .125 Nom.-FSC 5315
SAE AS 1229C
Insert, Screw Thread, Helical Coil, Stud Locking, Performance Standard for
SAE AS 137F
HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, STRAIGHT TO 45 DEGREE
SAE AS 1634D
HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARELESS, STRAIGHT TO 45???°
SAE AS 1736B
WASHER, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS
SAE AS 22759/21
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, NICKEL-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 1000-VOLT
SAE AS 27195
Seal, Plain, Rubber, Synthetic Oil Resistant, (-65 to + 275 Degree F), Mold in Groove-FSC 5330
SAE AS 3063B
Bolts, Screws, and Studs, Geometric Control Requirements
SAE AS 3100
Bolt, Machine - Hexagon Head, PD Shank, CRES AMS 5731, .250-28 UNJF-3A-FSC 5306
SAE AS 3122
PIN, EXPANSION - ALUMINUM, 2024-T4, LONG
SAE AS 3226
Tube, Tee, Boss - AMS 5646-FSC 4730
SAE AS 3397
Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251-FSC 5310
SAE AS 34001A
Connectors, Receptacle, Electric, Wall Mounting, Front Release, Crimp Contact, AN Type-FSC 5935; Should Be Used for New Design Instead of MS3400, which Was Inactivated for New Design January 8, 1999
SAE AS 4283A
Handles and Attachments for Hand Socket Wrenches
SAE AS 4569C
(R) Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 3000 psi, 275 Degrees F, Titanium Fittings, Flareless, Straight to 45 Degrees-FSC 4720
SAE AS 51007
Gasket, Rubber, Synthetic-FSC 5330
SAE AS 5498
Minimum Operational Performance Specification for Inflight Icing Detection Systems
SAE AS 7110D
Nadcap Requirements for Welding/Brazing
SAE AS 7116/3
NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELECTRICAL DISCHARGE MACHINING (EDM)
SAE AS 7211A
Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification-UNS S32100; FSC 5315
SAE AS 7472
Bolts and Screws, Steel, Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded-; FSC 5306; UNS S30200
SAE AS 85049/109B-A1
CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, NON-SELF LOCKING AND SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, MIL-DTL-5015 (SERIES I & II), AS81703 SERIES III, AND MIL-DTL-26482 SERIES II CONNECTORS)
SAE AS 8584
Brake Systems, Wheel, Aircraft, Design of
SAE AS 9210A
(R) BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A-FSC 5306
SAE AS 9576B
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A
SAE AS 9750
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Titanium AMS 4967, .190-32 UNJF-3A-FSC 5306
SAE AS 9924A
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A
SAE MA 4534
Socket Wrenches, Hand (Metric)
SAE MAP 3440
O-Ring Groove Design for Packing Preformed, Elastomeric O-Ring Seals, Static, Radial Squeeze, Metric
SAE ARP 4256A
Design Objectives for Liquid Crystal Displays for Part 25 (Transport) Aircraft
SAE ARP 5381
Minimum Performance Recommendations for Part 23, 27, and 29 Aircraft Wheels, Brakes, and Wheel and Brake Assemblies
SAE AS 1252A
TEE, FLARED TUBE FOR SEAL RING
SAE AS 1895/22B
COUPLING, V-RETAINER, DOUBLE LATCH, TYPE I STANDARD PROFILE
SAE AS 1941A
(R) FITTING END, STRAIGHT THREAD, HIGH PRESSURE, BOSS CONNECTION, DESIGN STANDARD
SAE AS 1960/4
Flange End, Design Standard
SAE AS 22759/46
WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, LIGHTWEIGHT, NICKEL-COATED HIGH-STRENGTH COPPER ALLOY, 200???°C, 600 VOLT
SAE AS 22759/83B
(R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 °C, 600-VOLT-FSC 6145
SAE AS 3132
Pin, Expansion - CRES, 303, Short-FSC 5315
SAE AS 33601
Track and Stud Fitting for Cargo Transport Aircraft, Standard Dimensions for-FSC 1560
SAE AS 3400
Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708, .190-32 UNJF-3A
SAE AS 4210D
FITTING, TEE, BEAM SEAL
SAE AS 4213A
Fitting, Plug, Beam Seal, Hydraulic
SAE AS 4623C
Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000 psi, 275 °F, Heavy Duty, Aircraft Hydraulic Systems
SAE AS 4664A
Fitting, Union, Bulkhead, Short Flareless-FSC 4730
SAE AS 4695A
Sleeve, Tube End, Acorn to Weld, Short Flareless-FSC 4730
SAE AS 5182B
Fitting, Elbow, 45 Degrees, Bulkhead, Flared to Hose-FSC 4730
SAE AS 5385C
(R) Cargo Restraint Straps - Design Criteria and Testing Methods
SAE AS 5586
Aerospace General Requirements for Hydraulic System Reservoirs
SAE AS 5780A
(R) Specification for Aero and Aero-Derived Gas Turbine Engine Lubricants
SAE AS 5839
FEMALE FERRULE, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, BUTT WELDED-FSC 4730
SAE AS 85049/34A
(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NON-ENVIRONMENTAL, THREADED ADAPTER, CATEGORY 3C (FOR MIL-DTL-26482 SERIES 1 JAM NUT RECEPTACLE CONNECTOR)
SAE AS 85049/77A
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 45°, SHIELD TERMINATION, CATEGORY 2B, NONSELF-LOCKING (MIL-DTL-38999 SERIES I AND II CONNECTORS)-FSC 5935
SAE AS 85049/87A
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90°, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)-FSC 5935
SAE AIR 1377A
Fire Test Equipment for Flexible Hose and Tube Assemblies
SAE AIR 5128
ELECTRICAL BONDING OF AIRCRAFT FUEL SYSTEM PLUMBING SYSTEMS
SAE ARP 1493A
Wheel and Brake Design and Test Requirements for Military Aircraft
SAE ARP 4378
Accumulators, Hydraulic, Cylindrical, Aircraft, Maintenance Free, Factory Precharged
SAE ARP 5143
Vacuum Bagging of Thermosetting Composite Repairs
SAE ARP 5935
Use of HVOF Thermal Spray Coatings for Hard Chrome Replacement in Landing Gear Applications
SAE ARP 693C
Landing and Taxiing Lights - Design Criteria for Installation
SAE AS 1073A
SLEEVE HOSE ASSEMBLY, HEAT SHRINKABLE
SAE AS 157E
HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45° TO 90°, FLARED, LIGHTWEIGHT
SAE AS 1895/19A
Flange, Female, Integral, Weld Ring, Type I Standard Profile
SAE AS 269H
Identification of Material for AN, MS, and AS Engine and Propeller Standard Utility Parts and Also for Company Parts
SAE AS 4135A
TEE, BULKHEAD ON SIDE, REDUCED BODY, FLARELESS-FSC 4730
SAE AS 4303
Elbow Assembly 90 Degree, Flared Tube to Adjustable End, for Seal Ring
SAE AS 4323
Nut, Retained, for Flared Tube Fittings
SAE AS 4340B
FITTING, BUSHING, SCREW THREAD REDUCER, FOR SEAL RING-FSC 4730
SAE AS 4787
EDDY CURRENT INSPECTION OF CIRCULAR HOLES IN NONFERROUS METALLIC AIRCRAFT ENGINE HARDWARE
SAE AS 4796B
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO STRAIGHT MALE
SAE AS 4892
Insert, Screw Thread, Self-Locking, UNS S66286, Locked In, Key Locked Procurement Specification For-FSC 5340
SAE AS 5834
SLEEVE, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING-FSC 4730
SAE AS 8091
Adapter, Aircraft, Jacking Point, Design and Installation of-FSC 1730; Should Be Used Instead of MIL-STD-809B, Which Was Cancelled on 1 July 1999
SAE AS 9373B
GASKET - METAL O-RING, .062 TUBE X .010 WALL, SILVER PLATED, CRES - UNS S32100-FSC 5330
SAE AS 9494A
(R) BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A-FSC 5306
SAE AS 9583A
(R) Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi Min, .1900-32 UNJF-3A
SAE AS 9585A
(R) BOLT, MACHINE - HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A
SAE MA 2150
Clamps, Loop or P Style, Single Point Mount, Multiple Shapes, Metric
SAE AIR 1047D
A Guide for the Selection of Quick-Disconnect Couplings for Aerospace Fluid Systems
SAE AIR 512D
Aircraft Cabin Illumination
SAE AIR 786A
Elastomer Compatibility Considerations Relative to O-Ring and Sealant Selection
SAE ARP 1481A
Corrosion Control and Electrical Conductivity in Enclosure Design
SAE ARP 1676
Recommended Formulae for Determining Drop Dimensions for Simple-Bend Tube Fittings with Flared and Flareless End Connections Used in Aerospace Applications
SAE ARP 1832
Color Identification for O-Ring Seals
SAE ARP 4293
Life Cycle Cost - Techniques and Applications
SAE ARP 5319
Impregnation of Dry Fabric and Ply Lay-Up
SAE ARP 584B
Coiled Tubing, Corrosion Resistant Steel, Hydraulic Applications, Aerospace
SAE ARP 9009
Aerospace Contract Clauses
SAE AS 123020 THRU AS 123119
Gasket - Aluminum - Non Asbestos, Annular
SAE AS 1960/2
COUPLING, SHEET METAL, 40° V-BAND, QUICK RELEASE (OPTIONAL SAFETY) LATCH
SAE AS 1960/3
Flange, Sheet Metal
SAE AS 21235
Fitting, Tiedown, Cargo Ring (10,000 LB) and Seat Stud, Type II-FSC 1670
SAE AS 21236
Ring, Cargo Tiedown (10,000 LB), Type III-FSC 1670
SAE AS 21431A
(R) BEARING, ROLLER, SELF-ALIGNING SINGLE ROW ANTI-FRICTION, SEALED -65 TO 350 °F, TYPE I-FSC 3110; Should Be Used Instead of MS21431A, Which Was Cancelled on 05 April 1999
SAE AS 21937A
(R) NUT, CLUSTER FITTING, RETAINER
SAE AS 22759/14
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, FEP-PVF2, LIGHT WEIGHT, TIN-COATED COPPER CONDUCTOR, 600-VOLT
SAE AS 22759/88B
(R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 °C, 600 VOLTS
SAE AS 24334B
Coupling Assembly, Hydraulic, Self-Sealing, Flareless Fitting to Internal Thread Boss-FSC 4730; Should Be Used Instead of MS24334
SAE AS 3265
Washer - Flat Load Spreading, Metric, AMS 5525-FSC 5310
SAE AS 33559
Adapter, Aircraft, Jacking Point, Design and Installation of-FSC 1730; Should Be Used Instead of MS33559E, Which Was Cancelled on 01 November 1999
SAE AS 3417
Bolt, Machine, Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 5662 .190-32UNJF-3A (Stress Rupture Resistant)-FSC 5306
SAE AS 38386
Duct Assembly, Ground, Conditioned Air, Insulated, Flexible
SAE AS 39029/37
Contacts, Electrical Connector, Socket, Crimp Removable (for MIL-C-28748/10 Connectors)
SAE AS 39029/86
Contacts, Electrical Connector, Socket, Crimp Removable, Thermocouple (for MIL-C-5015 MS3450 Series and MIL-C-83723 Series II Connectors)-FSC 5935
SAE AS 39029/93
Contacts, Electrical Connector, Pin, Crimp Removable, (for DOD-C-83527, Connector)-FSC 5935
SAE AS 4229
Fitting, Adapter, Bulkhead, External Thread, Beam Seal to Integral Weld Ring
SAE AS 4265
Impulse Testing of Hydraulic Tubing and Fittings, S-N Curve
SAE AS 4315
Elbow Assembly 90°, Flared Tube to Retained Nut, for Seal Ring
SAE AS 4751
Coupling Assembly, V-Band Sheet Metal Wide Flange, Pneumatic Tube
SAE AS 5238
Fitting, Adapter, Flareless to Flared-FSC 4730
SAE AS 5609
Aircraft/Store Common Interface Control Document Format Standard
SAE AS 5813
Tube - Pitot, Electrically Heated
SAE AS 7002
National Aerospace and Defense Contractors Accreditation Program (NADCAP) Rules for Implementation
SAE AS 7114/2
Nadcap Requirements for Nondestructive Testing Magnetic Particle Survey-Superseding AS 7100/1A
SAE AS 7118
Nadcap REQUIREMENTS FOR COMPOSITES
SAE AS 7997
Motors, Aircraft Hydraulic, Constant Displacement General Specification for-FSC 1650
SAE AS 81819/1
Bearings, Plain, Sliding Spherical, Self-Lubricating, Self-Aligning, High Speed Oscillation-FSC 3120
SAE AS 85049/128A
CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, SHIELD BAND, CAGEGORY 7 (FOR AS85049/82 - /90, /93, /109 - /117 ACCESSORIES)-FSC 5935
SAE AS 85049/141
CONNECTOR ACCESSORIES, ELECTRICAL BOOTS, HEAT-SHRINKABLE, 90°, CATEGORY 9-FSC 4090
SAE AS 85421/15C
FITTING, ELBOW, 45°, BEAM SEAL, 3000/4000 PSI, BULKHEAD, MALE ENDS
SAE AS 966B
Flange - Accessory, 8.000 BC Round, Design Standard for
SAE AS 9751
Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Titanium AMS 4967, .250-28 UNJF-3A-FSC 5306
SAE AS 9842A
(R) PIN, STRAIGHT, HEADED, .0937 DIAMETER, UNS S41800-FSC 5315
SAE MA 3331C
Insert, Screw Thread, Helical Coil, Metric Series, Screw Locking, CRES, Cadmium Plated
SAE AIR 1064D
(R) Braking System Dynamics
SAE AIR 5378
Aircraft Tube Bending Methods, Techniques and Tooling
SAE AIR 825C
Oxygen Equipment for Aircraft
SAE AS 121651 THRU AS 121700
Pin, Straight, Headed - .187 Nom.
SAE AS 1635D
Hose Assembly, Convoluted, Polytetrafluoroethylene, Metallic Reinforced Conductive, Flareless, Straight to 90 Degree
SAE AS 176C
Limits, Table of Limits and Lubrication Charts
SAE AS 1960/5
Installation, Joint, 40 Degrees V-Band Coupling and Narrow Sheet Metal Flanges-FSC 5340
SAE AS 21439A
(R) BEARING, ROLLER, NEEDLE, DOUBLE ROW, HEAVY DUTY, TRACK ROLLER, SEALED, TYPE VI, INCH-FSC 3110
SAE AS 24405
ADAPTER, FLARELESS TUBE TO FLARED TUBE PRECISION TYPE-FSC 4730; Should Be Used Instead of MS24405, Which Was Cancelled on 1 August 1999
SAE AS 291E
Surface Texture, Roughness, Waviness and Lay-Reaffirmed Noncurrent May 2006
SAE AS 3125
Plug, Expansion - CRES, 416, Long; Std and .010 Oversize Diameters
SAE AS 3244B
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .2500-28 UNJF-3A
SAE AS 3308
Bolt, Machine - Hexagon Head, PD Shank, AMS 5708, .3125-24 UNJF-3A-FSC 5306
SAE AS 3309
Bolt, Machine - Hexagon Head, PD Shank, AMS 5708, .375-24 UNJF-3A-FSC 5306
SAE AS 3622A
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN
SAE AS 39029/19A
(R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-81511 SERIES 3 AND 4 CONNECTORS)
SAE AS 39029/24
Contacts, Electrical Connector, Socket, Crimp Removable, Sheilded, (For MIL-C-26482 Series 1 Connectors)
SAE AS 39029/85
Contacts, Electrical Connector, Pin, Crimp Removable, Thermocouple (for MIL-C-5015 MS3450 Series and MIL-C-83723 Series II Connectors)-FSC 5935
SAE AS 39029/89
Contacts, Electrical Connector, Socket, Crimp Removable (Thermocouple for MIL-C-38999 Series II, MIL-C-83733, and MIL-C-24308 Connectors)-FSC 5935
SAE AS 4686B
(R) FITTING, ELBOW, 90°, REDUCER, BULKHEAD, FLARELESS AND SHORT FLARELESS
SAE AS 4693A
Union, Tube End, External Thread to Weld, Short Flareless-FSC 4730
SAE AS 472C
Flange-Accessory, 8
SAE AS 4808B
FITTING ASSEMBLY, ELBOW, 45°, BEAM SEAL, RETAINED NUT
SAE AS 4882A
CLAMP, LOOP, CUSHIONED, HINGED, QUICK RELEASE - CABLE OR WIRE
SAE AS 5205B
NUT, FITTING, ENGINE, FLARED
SAE AS 5663
Minimum Performance Requirements for Transport Airplane Wheel and Brake Assemblies Using Electric Power Actuation
SAE AS 5832
ASSEMBLED COUPLING COMPONENTS, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING-FSC 4730
SAE AS 7233
Rivets, Solid, UNS N04400, Corrosion Resistant 67Ni - 31Cu Procurement Specification for-FSC 5320; Supersedes AMS 7233C
SAE AS 8031A
Personal Protective Devices for Toxic and Irritating Atmospheres Air Transport Flight Deck (Sedentary) Crewmembers
SAE AS 81822
Wire, Electrical, Solderless Wrap, Insulated and Uninsulated, General Specification for
SAE AS 81822/3
WIRE, ELECTRICAL, SOLDERLESS WRAP, EXTRUDED POLYVINYIDENE FLUORIDE (PVDF) INSULATION, SILVER COATED SOLID CONDUCTOR-FSC 6145
SAE AS 85049/117B
(R) CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMODATION, CATEGORY 3B FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS
SAE AS 9025A
Clamp - Loop Type Support (Heat Resistant) .265 Hole
SAE AS 9112B
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286, 130 KSI, .3125-24 UNJF-3A
SAE AS 95
Fitting Assembly, Cross, Reducer and Nonreducer, Internal Flare on One End, to Flared Tube
SAE AS 9843A
(R) PIN, STRAIGHT, HEADED, .1249 DIAMETER, UNS S41800-FSC 5315
SAE AS85049/137
CONNECTOR ACCESSORIES, FIBER OPTIC BACKSHELL, SPLIT, 90°, SELF-LOCKING CATEGORY 3B FOR MIL-DTL- 38999 SERIES III AND AS5590/1 CONNECTORS
SAE AIR 1108
Groove Design-Metal Face Seal-
SAE AIR 1329A
Electrical Connectors and Wiring, Compatibility of
SAE AIR 4246B
Contaminants for Aircraft Turbine Engine Fuel System Component Testing
SAE AIR 5060
Electronic Engine Control Design Guide for Electromagnetic Environmental Effects
SAE ARP 4392
Lighting, Aircraft Exterior, Night Vision Imaging System (NVIS) Compatible
SAE ARP 5429
Landing Gear Fatigue Tests with Equivalent Damage Spectra
SAE ARP 991B
Position and Anticollision Lights - Turbine Powered Fixed-Wing Aircraft
SAE AS 118F
(R) HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 DEGREES F, 45 DEGREE TO 45 DEGREE, FLARELESS, LIGHTWEIGHT
SAE AS 121501 THRU 121525A
(R) NUT, PLAIN - HEXAGON, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN.
SAE AS 21237
Ring, Cargo Tiedown (25,000 LB), Type IV-FSC 1670
SAE AS 3077A
R) LOCKRING - FLUID CONNECTION BOSS INSERT, INTERNAL STRAIGHT THREAD-FSC 4730
SAE AS 3240B
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CRES, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A
SAE AS 3272
NUT - SELF-LOCKING, CLINCH, SERRATED SHANK, 700 DEGREES F, DRY FILM COATED, UNS S66286, UNJ THREAD-FSC 5310
SAE AS 3282B
GASKET - 37° FLARED TUBE FITTING, NICKEL, AMS 5553
SAE AS 3534A
(R) NUT, SELF-LOCKING, SHANK, UNS S66286 SILVER PLATE ON THD ONLY, UNJ THREAD
SAE AS 4444/2
Fitting, 24° Cone Flareless to 37° Flared, Fluid Connection
SAE AS 4467
Standardization, Hydraulic Tube Walls
SAE AS 5103
Fitting Assembly, Plug, Ring Locked Port Connection, 4000 psi and 5000 psi/8/
SAE AS 5189
Fitting, Adapter, Hose-FSC 4730; Supersedes AN849
SAE AS 5233
Fitting Assembly, Cap, Flareless-FSC 4730
SAE AS 627C
Hose Assembly, 3000 psi, PTFE, Flared, Straight to Straight, Heavyweight
SAE AS 7104A
NADCAP Requirements for Accreditation of Full Distributors
SAE AS 8056
Minimum Design and Performance of Airplane Galley In-Flight Carts, Containers, and Associated Components
SAE AS 81714/29
Terminal Junction System, Bracket, Block Mounting, Series I-FSC 5940
SAE AS 85421/17C
FITTING, TEE, BEAM SEAL, 3000/4000 PSI, BULKHEAD ON BRANCH, MALE ENDS
SAE AS 9158
Bolt-Machine, Steel, 12 Point Head, .250-28, Black Oxide-FSC 5306
SAE AS 9203B
Gasket - Metal O-Ring, .094 Tube X .006 Wall, Cres - UNS S31200-FSC 5330
SAE AS 9530A
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A
SAE AS 9885A
(R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S41800, 140 KSI MIN, .1900-32 UNJF-3A-FSC 5306
SAE MA 1518B
Bolts, Screws and Nuts - External Wrenching, Metric Threads - Design Parameters for
SAE MA 3349
Nut, Self Locking - Reduced Hex Drive, UNS S66286, Silver Plate, MJ Thread, Metric
SAE AIR 1228
Standard Impulse Machine Equipment and Operation
SAE ARP 5789
Aviation Fuel Facilities
SAE ARP 5825
Design Requirements and Test Procedures for Dual Mode Exterior Lights
SAE AS 100A
FITTING, CROSS, SHORT FLARELESS-FSC 4730
SAE AS 21220B
BEARING, ROLLER, ROD END, INTERNAL THREAD, SELF-ALIGNING, ANTI-FRICTION, AIRFRAME, HEAVY DUTY, TYPE II, -67 TO 350 °F, SEALED-FSC 3110
SAE AS 21984
CIRCUIT BREAKER-AIRCRAFT, TRIP-FREE PUSH-PULL, 3-PHASE, 5 THRU 60 AMP., TYPE I-FSC 5925; Amendment 1 - December 2004
SAE AS 22759/85B
(R) WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 °C, 600-VOLT-FSC 6145
SAE AS 3131
Plug, Expansion - CRES, 303, Short; Std and .010 Oversize Diameters-FSC 5315
SAE AS 3233
Bolt, Tee Head - AMS 5708, Chamfered, .2500-28 UNJF-3A-FSC 5306
SAE AS 3436
Spacer, Sleeve - for .250 Inch Bolt, AMS4901 or AMS4921-FSC 5365
SAE AS 4088C
Aerospace Rod Scraper Gland Design Standard
SAE AS 4203A
Fitting, Beam Seal, Female Tube End, Internal Swage, 4000 psi, Hydraulic-FSC 4730
SAE AS 4587
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 Degree F, Titanium Fittings, Beam Seal, Straight to 45 Degree
SAE AS 4661A
Fitting Assembly, Cap, Short Flareless-FSC 4730
SAE AS 469B
Drive-Accessory, 8
SAE AS 5371
Reference Standards Notched Shims for Magnetic Particle Inspection
SAE AS 8037A
Minimum Performance Standard for Aircraft Position Lights
SAE AS 81824/5
SPLICES, ELECTRIC, PERMANENT, CRIMP STYLE, COPPER, INSULATED, ENVIRONMENT RESISTANT, KIT, SHIELDED CABLE, CLASS I-FSC 5940
SAE AS 85049/30
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, INDIVIDUAL SHIELDED WIRE TERMINATION, CATEGORY 3B (FOR MIL-C-38999 SERIES I AND II CONNECTORS)-FSC 5935
SAE AS 85049/44
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN, RELIEF, STRAIGHT CATEGORY 4C (FOR MIL-C-83733 CONNECTORS)-FSC 5935
SAE AS 85049/56
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4C (MIL-C-38999 SERIES I AND II CONNECTORS)-FSC 5935
SAE AS 85049/58A
Connector Accessories, Electrical, Ring, Potting Boot, Category 5 (MIL-DTL-38999 Series I and II Connectors)-FSC 5935
SAE AS 85421/11C
FITTING, UNION, BEAM SEAL, 3000/4000 PSI, MALE ENDS
SAE AS 9133
Qualification Procedure for Aerospace Standard Parts
SAE AS 9310A
(R) STUD, SHOULDERED, HEX, WRENCHING, DRILLED, STEEL UNS G87400, CAD, PLATED, 125 KSI MIN, .2500-28 UNF-3A X .2500-28 UNF-3A-FSC 5307
SAE AS 9394
Strap, Retaining-Multiple Tube, Detachable Cushion, AMS 5510
SAE MA 4017
Ring, Retaining - Internal, Spiral Wound, Heavy & Medium Duty CRES, Metric-FSC 5365
SAE AIR 1418A
Flexure Fatigue Strength of Tube Fitting Joints
SAE AIR 1494A
Verification of Landing Gear Design Strength
SAE AIR 1758
Limits and Fits - International Metric Tolerance System
SAE ARP 4946
Aerospace - Valves, Check, Hydraulic, Aircraft and Missile
SAE ARP 4990
Turbine Flowmeter Fuel Flow Calculations
SAE ARP 5056
Flight Crew Interface Considerations in the Flight Deck Design Process for Part 25 Aircraft
SAE ARP 5607A
Legibility of Print on Aerospace Wires and Cables
SAE ARP 986C
Guide for Qualification Testing of Aircraft Air Valves
SAE AS 119F
(R) HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45° TO 90°, FLARELESS LIGHTWEIGHT
SAE AS 121701 THRU AS 121750
Pin, Straight, Headed - .250 Nom.
SAE AS 1502
Hose, Air Duct, Flexible, Helical, Metallic Wire, Supported (Exposed), Self-Extinguishing
SAE AS 22759/13
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, FEP-PVF2, MEDIUM WEIGHT, TIN-COATED COPPER CONDUCTOR, 600-VOLT
SAE AS 22759/30
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, POLYIMIDE COATED, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT
SAE AS 3102
Bolt, Machine - Hexagon Head, PD Shank, CRES AMS 5731, .375-24 UNJF-3A-FSC 5306
SAE AS 3532
Bolt, Shear - Double Hex Head, Drilled Shank, UNS N07718 - 185 ksi-FSC 5306
SAE AS 3535A
(R) Nut, Self-Locking, Shank, UNS N07001 Silver Plate, UNJ Thread
SAE AS 38404
Couplings, Hose, Reattachable Screw-On-FSC 4730; Should Be Used Instead of MIL-C-38404E, Which Was Cancelled on 20 October 1999
SAE AS 4216
FITTING, BEAM SEAL, MALE BULKHEAD TUBE END, INTERNAL SWAGE, 4000 psi, HYDRAULIC
SAE AS 4372B
Performance Requirements for Wire, Electric, Insulated Copper or Copper Alloy
SAE AS 4417
Nuts, Self-Locking, Alloy, Corrosion and Heat Resistant High Strength, All Metal, Dry Film Lubricated, 1400 Degrees F (760 Degrees C), Procurement Specification
SAE AS 4458B
Fitting End, Flareless, Blunt Nose, Design Standard
SAE AS 4588
Hose Assembly, PTFE, Para-Aramid Reinforced, Standard Duty, 4000 PSI, 275 Degrees F, Titanium Fittings, Beam Seal, Straight to 90 Degree
SAE AS 4604B
Hose Assembly, 3000 psi, Polytetrafluoroethylene, Metallic Reinforced, 400 °F, Heavy Duty, Aircraft Hydraulic Systems
SAE AS 4689B
(R) FITTING, TEE, REDUCER, BULKHEAD ON RUN, FLARELESS AND SHORT FLARELESS
SAE AS 4702A
Nut, Retained, Short Flareless-FSC 4730
SAE AS 50141A
(R) Tube, Pneumatic Tire, Aircraft
SAE AS 5165A
Fitting, Connector, Multiple Fluid Pressure Line, Tee
SAE AS 5756
Cable, Power, Electrical, Portable General Specification For-Amendment 1 - July 2004
SAE AS 5838
FEMALE FERRULE, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, SWAGED-FSC 4730
SAE AS 5976A
FITTING ASSEMBLY, 90°, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
SAE AS 624C
Hose Assembly, 3000 psi, PTFE, Flareless, 45 Degree to 45 Degree, Heavyweight
SAE AS 7107
National Aerospace and Defense Contractors Accreditation Program Inspection System Requirements
SAE AS 7109A
(R) Nadcap Requirements for Coatings
SAE AS 7454
Bolts and Screws, Steel, Low Alloy, Heat Resistant 135 000 psi Tensile Strength, Normalized and Tempered, Roll Threaded-; FSC 5306
SAE AS 7455
Bolts and Screws, Steel, Low Alloy, Heat Resistant Hardened and Tempered, Roll Threaded-FSC 5306; UNS K14675; Supersedes AMS 7455E
SAE AS 7481B
Studs, Steel, UNS S66286 Aged After Roll Threaded Procurement Specification For-FSC 5307; Reaffirmed Noncurrent December 2001; Reaffirmed Noncurrent May 2006
SAE AS 8002A
Air Data Computer - Minimum Performance Standard
SAE AS 85049/3
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, CABLE SEALING, STRAIGHT, CATEGORY 1A (FOR MIL-C-22992 CONNECTORS, CLASSES C, J, AND R)-FSC 5935
SAE AS 85049/86A
(R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45°, SELF-LOCKING, SHIELD BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
SAE AS 85421/16C
FITTING, TEE, BEAM SEAL, 3000/4000 PSI, BULKHEAD ON RUN, MALE ENDS
SAE AS 90335
CONNECTOR, RECEPTACLES, PLUGS, ADAPTOR, EL, EMBEDDED, PRINTED CIRCUIT BOARD LAMP LIGHTING PANELS-FSC 5935
SAE AS 9309A
(R) STUD, SHOULDERED, STEPPED, HEX, WRENCHING, DRILLED, STEEL UNS G87400, CAD, PLATED, 125 KSI MIN, .1900-32 UNF-3A X .2500-28 UNF-3A-FSC 5307
SAE AS 932B
(R) Fitting, Adapter, Reducer/Expander, Flareless to Boss
SAE AS 9595A
(R) BRACKET, ANGLE, 90 DEGREES, CRES UNS S32100, .190 X .375 BOLT-FSC 5340
SAE AS 9714
Bolt, Machine - Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel, .190-32 UNJF-3A-FSC 5306
SAE AS 9887
Bolt, Machine-Double Hexagon Extended Washer Head, AMS 5616, .3125-24 UNJF-3A-FSC 5306
SAE AS5678
Passive RFID Tags Intended for Aircraft Use
SAE MA 1573
Nut, Self-Locking - Steel, Class 1100 MPa/235°C, MJ Thread Procurement Specification For, Metric-FSC 5310
SAE AIR 1326A
Aircraft Fuel System Vapor-Liquid Ratio Parameter
SAE ARP 1527B
Color Coding - Elastomers for Tube Clamp Cushions
SAE ARP 1827A
(R) Measuring Aircraft Gas Turbine Engine Fine Fuel Filter Element Performance
SAE ARP 1876B
Weldability Test for Weld Filler Metal Wire
SAE ARP 378C
Passenger Reading Lights
SAE ARP 5288
Transport Category Airplane Head Up Display (HUD) Systems
SAE ARP 5638
RMS Terms and Definitions
SAE ARP 597D
(R) Wheels and Brakes, Supplementary Criteria for Design Endurance Civil Transport Aircraft
SAE ARP 674C
(R) Groove Design, Metal O-Ring Gasket
SAE ARP 899B
Tube Fittings, Fluid Systems, Permanent Type, General Requirements for
SAE AS 14274
Pin, Quick Release, Positive Locking,
SAE AS 154E
HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, STRAIGHT TO 45°, FLARED, LIGHTWEIGHT
SAE AS 1720B
Ferrule End, Coupling, Flexible Variable Cavity, Threaded, Ferrule Type, Design Standard-FSC 4730
SAE AS 21223A
(R) BEARING, ROLLER, ROD END, EXTERNAL THREAD, SELF-ALIGNING, ANTI-FRICTION, AIRFRAME, HEAVY DUTY, TYPE I, -67° TO 350°F, SEALED-FSC 3110
SAE AS 24001
Fuse Holder, Block-Type, 1-, 2-, and 3-Pole, 35- to 60-Ampere, Aircraft-FSC 5920; Should Be Used Instead of MS24001F, Which Was Cancelled on 13 September 1999
SAE AS 24335
Flange, Bulkhead Mounting, Hydraulic Self-Sealing Coupling-FSC 4730
SAE AS 3163
Nut, Plain - O.D. Slots, Key Washer Locked, AMS 6322, MIL-S-8879-FSC 5310
SAE AS 3611
BOLT, MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN-FSC 5306
SAE AS 39029/18
Contacts, Electrical Connector, Pin, Crimp Removable, (for Mil-C-81511 Series 3 and 4 Connectors)-FSC 5935
SAE AS 4073
Air Cycle Air Conditioning Systems for Military Air Vehicles
SAE AS 4300A
(R) FITTING ASSEMBLY, CAP, FLARELESS, PROTECTIVE CLOSURE, LOW PRESSURE
SAE AS 4659A
FITTING END, BULKHEAD, EXTERNAL THREAD, SHORT FLARELESS, DESIGN STANDARD-FSC 4730
SAE AS 5188A
Fitting, Elbow, 90 Degrees, Bulkhead, Hose-FSC 4730
SAE AS 5449
FITTING END, WELD RING, SHORT TAPERED, DESIGN STANDARD
SAE AS 56761
Splicing; Cable Terminal, Process for, Aircraft-FSC 5130; Should Be Used Instead of MIL-S-5676, Which Was Cancelled on 29 October 1999
SAE AS 686B
Piloted Ring Seal Tube Swivel Connection Assembly
SAE AS 7109/5A
(R) Nadcap Requirements for Coating Evaluation Laboratory Practices
SAE AS 7118/1
Nadcap REQUIREMENTS FOR PREPREG/ADHESIVE BONDING
SAE AS 81714/4
Terminal Junction System, Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Size 12, Series I-FSC 5940
SAE AS 85049/103A
CONNECTORS, ACCESSORIES, COMPOSITE, RFI/EMI, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING, CATEGORY 3C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)-FSC 5935
SAE AS 85049/81
CONNECTOR ACCESSORIES, ELECTRICAL, SEAL PLUG, SIZE 10, CATEGORY 7 (FOR MIL-C-38999 CONNECTORS)-FSC 5935
SAE AS 85421/3C
FITTING, TEE, REDUCER, BEAM SEAL, 3000/4000 PSI, 3 MALE ENDS
SAE AS 9462A
(R) PIN, STRAIGHT, HEADED, .124 DIAMETER, CRES, UNS S66286
SAE AS 9816
Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, AMS 5643, .190-32 UNJF-3A
SAE MA 3340B
Bolt, Machine-Spline Extended Washer, PD Shank, Long Thread, AMS 5662, Metric-FSC 5306
SAE AIR 1083B
Airborne Hydraulic and Control System Survivability for Military Aircraft
SAE AIR 1364A
Age Control of Age Sensitive Elastomeric Materials
SAE AIR 4566
Crashworthy Landing Gear Design
SAE AIR 5493A
(R) Requirements for Development, Implementation and Control of an Aerospace Auditor Training
SAE ARP 1179C
Aircraft Gas Turbine Engine Exhaust Smoke Measurement
SAE ARP 1420B
Gas Turbine Engine Inlet Flow Distortion Guidelines
SAE ARP 1675
Structural Weldbonding of Aluminum Structures
SAE ARP 1947B
Dendrite Arm Spacing of Structural Aircraft Quality D357 Aluminum Alloy Castings, Determination and Acceptance of
SAE ARP 4043B
Flight Line Grounding and Bonding of Aircraft
SAE ARP 4103
Flight Deck Lighting for Commercial Transport Aircraft
SAE ARP 4386B
(R) Terminology and Definitions for Aerospace Fluid Power, Actuation and Control Technologies
SAE ARP 5144
Heat Application for Thermosetting Resin Curing
SAE AS 1620
Stud, Locked in - Ring, Straight, Hole Preparation for
SAE AS 21443A
(R) Bearing, Ball, Airframe, Anti-Friction, Pulley
SAE AS 28772
Packing, Preformed, (
SAE AS 3076
Ring - Back-Up, Boss Connection, Polytetrafluoroethylene
SAE AS 3528
Bolt, Shear - Double Hex Head, UNS S66286 - 160 ksi-FSC 5306
SAE AS 39029/17
Contacts, Electrical Connector, Socket, Crimp Removable, (For MIL-C-81511 Series 3 Connectors)-FSC 5935
SAE AS 39029/3
Contacts, Electrical Connectors, Socket, Crimp Removable, (for Mil-C-81659 Series 1 Connectors)-FSC 5935
SAE AS 39029/49
Contacts, Electrical Connector, Socket, Crimp Removable (for MIL-C-22992 Class L Connectors)-FSC 5935
SAE AS 39029/54
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26500(USAF) AND MIL-C-26518(USAF) CONNECTORS)-FSC 5935
SAE AS 4200A
Fitting Assembly, Adapter Ring Locked Port Connection to Beam Seal 8000 psi-FSC 4730
SAE AS 4321
Fitting End, Internal Flare, Single Angle, Standard Dimensions for, Design Standard
SAE AS 4672B
Fitting, Tee, Bulkhead on Run, Short Flareless-FSC 4730
SAE AS 4701
Wire, Retainer, Tube Coupling Nut, Short Flareless-FSC 4730
SAE AS 5127/2
Test Methods for Aerospace Firewall Sealant Flame Penetration
SAE AS 5961
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, STRAIGHT TO STRAIGHT-FSC 4720
SAE AS 5963
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, STRAIGHT TO 90 DEGREES ELBOW-FSC 4720
SAE AS 623C
Hose Assembly, 3000 psi, PTFE, Flareless, Straight to 90 Degree, Heavyweight-FSC 4720
SAE AS 7116
NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR NONCONVENTIONAL MACHINING
SAE Standards : SAE - Aerospace Standards (AS) Page 3
>> Page 1 2 3 4 5 6 7 8 9
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
