JIS Standards Catalogue

JIS A 1423:1983
Simplified test method for emissivity by infrared radio meter (FOREIGN STANDARD)
JIS A 1429:2007
Field measurement of sound pressure level from appliances and equipment used in water supply and drainage installations in buildings (FOREIGN STANDARD)
JIS B 0251:2008
Limit gauges for metric screw threads (Foreign Standard)
JIS B 0401-1:1998
ISO system of limits and fits -- Part 1: Bases of tolerances, deviations and fits (FOREIGN STANDARD)
JIS B 0401-2:1998
ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts (FOREIGN STANDARD)
JIS B 0403:1995
Castings -- System of dimensional tolerances and machining allowances (FOREIGN STANDARD)
JIS B 0405:1991
General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (FOREIGN STANDARD)
JIS B 0411:1978
Permissible deviations in dimensions without tolerance indication for metallic sintered products (FOREIGN STANDARD)
JIS B 0415:1975
Dimensional tolerance for steel die forgings (hammer and press forging) (FOREIGN STANDARD)
JIS B 0416:1975
Dimensional tolerance for steel die forgings (upsetting) (FOREIGN STANDARD)
JIS B 0417:1979
Permissible deviation in dimensions without tolerance indication for gas cut steel plates (FOREIGN STANDARD)
JIS B 0418:1999
Machining allowance for open die forgings (FOREIGN STANDARD)
JIS B 0419:1991
General tolerances -- Part 2: Geometrical tolerances for features without individual tolerance indications (FOREIGN STANDARD)
JIS B 0612:2002
Geometrical Product Specifications (GPS) -- Series of conical tapers and taper angles (FOREIGN STANDARD)
JIS B 0613:1976
Deviations for centre distance (FOREIGN STANDARD)
JIS B 0614:1987
System of cone tolerances (FOREIGN STANDARD)
JIS B 0615:2002
Geometrical Product Specifications (GPS) -- Series of angles and slopes on prisms (FOREIGN STANDARD)
JIS B 0616:1996
System of cone fits (FOREIGN STANDARD)
JIS B 0621:1984
Definitions and designations of geometrical deviations (FOREIGN STANDARD)
JIS B 0631:2000
Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Motif parameters (FOREIGN STANDARD)
JIS B 0632:2001
Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Metrological characteristics of phase correct filters (FOREIGN STANDARD)
JIS B 0633:2001
Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture (FOREIGN STANDARD)
JIS B 0641-1:2001
Geometrical Product Specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 1: Decision rules for proving conformance or nonconformance with specifications (FOREIGN STANDARD)
JIS B 0651:2001
Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments (FOREIGN STANDARD)
JIS B 0659-1:2002
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 1: Material measures (FOREIGN STANDARD)
JIS B 0670:2002
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Calibration of contact (stylus) instruments (FOREIGN STANDARD)
JIS B 0671-1:2002
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 1: Filtering and general measurement conditions (FOREIGN STANDARD)
JIS B 0671-2:2002
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve (FOREIGN STANDARD)
JIS B 0671-3:2002
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 3: Height characterization using the material probability curve (FOREIGN STANDARD)
JIS B 0701:1987
Chamfer and roundness of machined parts (FOREIGN STANDARD)
JIS B 0703:1987
Roundness of castings (FOREIGN STANDARD)
JIS B 0706:1987
Corner and fillet radii of forged parts (hot and warm forgings) (FOREIGN STANDARD)
JIS B 0711:1976
Removal in grindings (FOREIGN STANDARD)
JIS B 0906:1998
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- General guidelines (FOREIGN STANDARD)
JIS B 0907:1989
Mechanical vibration of rotating and reciprocating machinery -- Requirements for instruments for measuring vibration severity (FOREIGN STANDARD)
JIS B 0910:1999
Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- General guidelines (FOREIGN STANDARD)
JIS B 1548:1995
Rolling bearings -- Measuring methods of A-weighted sound pressure levels (FOREIGN STANDARD)
JIS B 1753:1999
Acceptance code for gears -- Determination of airborne sound power levels emitted by gear units (FOREIGN STANDARD)
JIS B 1754:1998
Acceptance code for gears -- Part 2: Determination of mechanical vibrations of gear units during acceptance testing (FOREIGN STANDARD)
JIS B 2005-4:2008
Industrial-process control valves -- Part 4: Inspection and routine testing (FOREIGN STANDARD)
JIS B 2005-8-2:2008
Industrial-process control valves -- Part 8: Noise considerations -- Section 2: Laboratory measurement of noise generated by hydrodynamic flow through control valves (Foreign Standard)
JIS B 2005-8-3:2008
Industrial-process control valves -- Part 8-3: Noise considerations -- Control valve aerodynamic noise prediction method (Foreign Standard)
JIS B 2005-8-4:2008
Industrial-process control valves -- Part 8-4: Noise considerations -- Prediction of noise generated by hydrodynamic flow (Foreign Standard)
JIS B 3102:2001
Gauge blanks for screw threads limit gauges (FOREIGN STANDARD)
JIS B 3301:2008
Taper gauges -- Morse tapers and metric tapers (FOREIGN STANDARD)
JIS B 6004:1980
Method of sound level measurement for machine tools (FOREIGN STANDARD)
JIS B 6521:1978
Methods of measurement for noise emitted by wood working machinery (FOREIGN STANDARD)
JIS B 7184:1999
Profile projectors (FOREIGN STANDARD)
JIS B 7309:1982
Tipping bucket rain gauges (FOREIGN STANDARD)
JIS B 7410:1997
Liquid-in-glass thermometers for testing of petroleum products (FOREIGN STANDARD)
JIS B 7411:1997
Solid-stem general purpose liquid-in-glass thermometers (FOREIGN STANDARD)
JIS B 7420:1997
Plain limit gauges (FOREIGN STANDARD)
JIS B 7430:1977
Optical flats (FOREIGN STANDARD)
JIS B 7431:1977
Optical parallels (FOREIGN STANDARD)
JIS B 7432:1985
Optical polygons for angle standards (FOREIGN STANDARD)
JIS B 7440-2:2003
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 2: CMMs used for measuring size (FOREIGN STANDARD)
JIS B 7440-3:2003
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 3: CMM's with the axis of a rotary table as the fourth axis (FOREIGN STANDARD)
JIS B 7440-4:2003
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 4: CMMs used in scanning measuring mode (FOREIGN STANDARD)
JIS B 7440-5:2004
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 5: CMMs using multiple-stylus probing systems (FOREIGN STANDARD)
JIS B 7440-6:2004
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 6: Estimation of errors in computing Gaussian associated features (FOREIGN STANDARD)
JIS B 7450:1989
Digital position readout (FOREIGN STANDARD)
JIS B 7451:1997
Instruments for the assessment of departure from roundness -- Measurement of variations in radius (FOREIGN STANDARD)
JIS B 7502:1994
Micrometer callipers (FOREIGN STANDARD)
JIS B 7503:1997
Dial gauges (FOREIGN STANDARD)
JIS B 7506:2004
Gauge blocks (FOREIGN STANDARD)
JIS B 7507:1993
Vernier, dial and digital callipers (FOREIGN STANDARD)
JIS B 7510:1993
Precision levels (FOREIGN STANDARD)
JIS B 7512:2005
Steel tape measures (FOREIGN STANDARD)
JIS B 7513:1992
Precision surface plates (FOREIGN STANDARD)
JIS B 7514:1977
Steel straightedges (FOREIGN STANDARD)
JIS B 7515:1982
Cylinder gauges (FOREIGN STANDARD)
JIS B 7516:2005
Metal rules (FOREIGN STANDARD)
JIS B 7517:1993
Vernier, dial and digital height gauges (FOREIGN STANDARD)
JIS B 7518:1993
Vernier, dial and digital depth gauges (FOREIGN STANDARD)
JIS B 7519:1994
Microindicators (FOREIGN STANDARD)
JIS B 7520:1981
Indicating micrometers (FOREIGN STANDARD)
JIS B 7522:2005
Textile tape measures (FOREIGN STANDARD)
JIS B 7523:1977
Sine bars (FOREIGN STANDARD)
JIS B 7524:2008
Feeler gauges (FOREIGN STANDARD)
JIS B 7525:1997
Density hydrometers (FOREIGN STANDARD)
JIS B 7526:1995
Squares (FOREIGN STANDARD)
JIS B 7528:1979
Mercury filled thermometers (FOREIGN STANDARD)
JIS B 7529:1979
Vapour pressure thermometers (FOREIGN STANDARD)
JIS B 7531:1982
Gear tooth vernier callipers (FOREIGN STANDARD)
JIS B 7533:1990
Dial test indicators (Lever type) (FOREIGN STANDARD)
JIS B 7534:2005
Carpenter's squares (FOREIGN STANDARD)
JIS B 7535:1982
Flow type air gauges (FOREIGN STANDARD)
JIS B 7536:1982
Electrical comparators (FOREIGN STANDARD)
JIS B 7538:1992
Autocollimators (FOREIGN STANDARD)
JIS B 7539:1971
Cylindrical squares (FOREIGN STANDARD)
JIS B 7541:2001
Standard scales (FOREIGN STANDARD)
JIS B 7543:2005
Triangular scales (FOREIGN STANDARD)
JIS B 7544:1994
Depth micrometers (FOREIGN STANDARD)
JIS B 7545:1982
Test bars (FOREIGN STANDARD)
JIS B 7547:2008
Procedures of characterization and calibration for digital pressure gauges (Foreign Standard)
JIS B 7553:1993
Parshall flume type flowmeters (FOREIGN STANDARD)
JIS B 7554:1997
Electromagnetic flowmeters (FOREIGN STANDARD)
JIS B 7555:2003
Method of flow measurement by coriolis meters (mass flow, density and volume flow measurement) (FOREIGN STANDARD)
JIS B 7556:2008
Procedures of calibration and testing for gas flowmeter (FOREIGN STANDARD)
JIS B 7601:1983
Trip balances (FOREIGN STANDARD)
JIS B 7603:1997
Hopper scales (FOREIGN STANDARD)
JIS B 7738:2001
Verification of helical compression and extension springs testing machines (FOREIGN STANDARD)
JIS B 8222:1993
Land boilers -- Heat balancing (FOREIGN STANDARD)
JIS B 8302:2002
Measurement methods of pump discharge (FOREIGN STANDARD)
JIS B 8310:1985
Methods of a-weighted sound pressure level measurement for pumps (FOREIGN STANDARD)
JIS B 8346:1991
Fans, blowers and compressors -- Determination of A-weighted sound pressure level (FOREIGN STANDARD)
JIS B 8572-1:2008
Fuel oil flow meters -- Measuring instruments used in transaction or certification -- Part 1: Fuel dispensers for motor vehicles (Foreign Standard)
JIS C 1102-1:2007
Direct acting indicating analogue electrical measuring instruments and their accessories -- Part 1: Definitions and general requirements common to all parts (FOREIGN STANDARD)
JIS C 1102-2:1997
Direct acting indicating analogue electrical measuring instruments and their accessories Part 2: Special requirements for ammeters and voltmeters (FOREIGN STANDARD)
JIS C 1102-3:1997
Direct acting indicating analogue electrical measuring instruments and their accessories Part 3: Special requirements for wattmeters and varmeters (FOREIGN STANDARD)
JIS C 1102-4:1997
Direct acting indicating analogue electrical measuring instruments and their accessories Part 4: Special requirements for frequency meters (FOREIGN STANDARD)
JIS C 1102-5:1997
Direct acting indicating analogue electrical measuring instruments and their accessories Part 5: Special requirements for phase meters, power factor meters and synchroscopes (FOREIGN STANDARD)
JIS C 1102-6:1997
Direct acting indicating analogue electrical measuring instruments and their accessories Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters (FOREIGN STANDARD)
JIS C 1102-7:1997
Direct acting indicating analogue electrical measuring instruments and their accessories Part 7: Special requirements for multi-function instruments (FOREIGN STANDARD)
JIS C 1102-8:1997
Direct acting indicating analogue electrical measuring instruments and their accessories Part 8: Special requirements for accessories (FOREIGN STANDARD)
JIS C 1102-9:1997
Direct acting indicating analogue electrical measuring instruments and their accessories Part 9: Recommended test methods (FOREIGN STANDARD)
JIS C 1103:1984
Dimensions of electrical indicating instruments for switchboards (FOREIGN STANDARD)
JIS C 1202:2000
Circuit testers (FOREIGN STANDARD)
JIS C 1210:1979
General rules for electricity meters (FOREIGN STANDARD)
JIS C 1211:1995
Alternating-current watt-hour meters (for direct connection) (FOREIGN STANDARD)
JIS C 1216:1995
Alternating-current watt-hour meters (for connection through instrument transformer) (FOREIGN STANDARD)
JIS C 1263:1995
Var-hour meters (FOREIGN STANDARD)
JIS C 1281:1979
Weather-proof performance of electricity meters (FOREIGN STANDARD)
JIS C 1283:1979
Watt-hour, var-hour and maximum demand indicators for telemetering (FOREIGN STANDARD)
JIS C 1302:2002
Insulation resistance testers (FOREIGN STANDARD)
JIS C 1304:2002
Earth testers (FOREIGN STANDARD)
JIS C 1508:2000
Electroacoustics -- Random incidence and diffuse field calibration of sound level meters (FOREIGN STANDARD)
JIS C 1509-1:2005
Electroacoustitcs -- Sound level meters -- Part 1: Specifications (FOREIGN STANDARD)
JIS C 1509-2:2005
Electroacoustics -- Sound level meters -- Part 2: Pattern evaluation tests (FOREIGN STANDARD)
JIS C 1510:1995
Vibration level meters (FOREIGN STANDARD)
JIS C 1512:1996
Level recorders for recording sound level and/or vibration level (FOREIGN STANDARD)
JIS C 1515:2004
Electroacoustics -- Sound calibrators (FOREIGN STANDARD)
JIS C 1602:1995
Thermocouples (FOREIGN STANDARD)
JIS C 1604:1997
Resistance thermometer sensors (FOREIGN STANDARD)
JIS C 1605:1995
Mineral insulated thermocouples (FOREIGN STANDARD)
JIS C 1610:1995
Extension and compensating cables for thermocouples (FOREIGN STANDARD)
JIS C 1611:1995
Thermistor for temperature measurement (FOREIGN STANDARD)
JIS C 1612:2000
Test methods for radiation thermometers (FOREIGN STANDARD)
JIS C 1731-1:1998
Instrument transformetrs for testing purpose and used with general instrument -- Part 1: Current transformers (FOREIGN STANDARD)
JIS C 1731-2:1998
Instrument tranformters for testing purpose and used with general instrument -- Part 2: Voltage transformers (FOREIGN STANDARD)
JIS C 1736:2003
Instrument transformers for metering service (FOREIGN STANDARD)
JIS C 2135:2004
Dry, solid insulating materials -- Resistance test to high-voltage, low-current arc discharges -- Test methods (FOREIGN STANDARD)
JIS C 2170:2004
Electrostatics -- Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation (FOREIGN STANDARD)
JIS C 3407:2003
High voltage cables for X-ray apparatus (FOREIGN STANDARD)
JIS C 5512:2000
Hearing aids (FOREIGN STANDARD)
JIS C 60068-2-21:2002
Environmental testing -- Part 2-21: Tests -- Test U: Robustness of termination and integral mounting devices (FOREIGN STANDARD)
JIS C 60068-2-57:2002
Environmental testing -- Electrotechnical products -- Time-history vibration test method (FOREIGN STANDARD)
JIS C 60068-2-59:2001
Environmental testing -- Part 2: Test methods Test Fe: Vibration -- Sine-beat method (FOREIGN STANDARD)
JIS C 60068-2-77:2002
Environmental testing -- Part 2-77: Tests -- Test 77: Body strength and impact shock (FOREIGN STANDARD)
JIS C 6185:2008
Test methods of optical time domain reflectometer (FOREIGN STANDARD)
JIS C 8367:1997
Electromechanical pressure type thermostats for household appliances (FOREIGN STANDARD)
JIS D 1026:1987
Measurement of noise emitted by stationary road vehicles (FOREIGN STANDARD)
JIS D 1601:1995
Vibration testing methods for automobile parts (FOREIGN STANDARD)
JIS D 1616:1995
Road vehicles -- Measurement methods of noise emitted by exhaust systems (FOREIGN STANDARD)
JIS E 4023:1990
Vibration characteristics of railway rolling stock -- Measuring methods (FOREIGN STANDARD)
JIS E 4031:2008
Rolling stock equipment -- Shock and vibration tests (Foreign Standard)
JIS H 7305:2003
Superconductivity -- Part 3: Critical current measurement -- DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors (FOREIGN STANDARD)
JIS H 7851:2005
Testing method for heat resistance under temperature gradient (FOREIGN STANDARD)
JIS K 0970:1989
Piston operated micro-volumetric apparatus (FOREIGN STANDARD)
JIS K 6385:2001
Testing methods for rubber vibration isolators (FOREIGN STANDARD)
JIS K 6386:1999
Rubber materials for vibration isolators (FOREIGN STANDARD)
JIS L 0809:2001
Instrumental determination of colour fastness -- Change in colour and staining (FOREIGN STANDARD)
JIS P 8149:2000
Paper and board -- Determination of opacity (paper backing) -- Diffuse reflectance method (FOREIGN STANDARD)
JIS R 0301:1991
Heat balancing of pottery and refractory firing tunnel kiln (FOREIGN STANDARD)
JIS R 0302:1991
Heat balancing of pottery and refractory firing periodic kiln (FOREIGN STANDARD)
JIS R 0304:1991
Heat balancing of continuous dryer for ores and other materials (FOREIGN STANDARD)
JIS R 0305:1991
Heat balancing of kiln and furnace for lime (FOREIGN STANDARD)
JIS T 1201-1:2000
Audiometers -- Part 1: Pure-tone audiometers (FOREIGN STANDARD)
JIS T 1201-2:2000
Audiometers -- Part 2: Equipment for speech audiometry (FOREIGN STANDARD)
JIS Z 0119:2002
Mechanical-shock fragility testing methods for packaging and products design (FOREIGN STANDARD)
JIS Z 4334:2005
Reference sources for the calibration of surface contamination monitors -- Beta-emitters (maximum beta energy greater than 0.15 MeV) and alpha-emitters (FOREIGN STANDARD)
JIS Z 4337:1997
Installed articles surface contamination monitoring assemblies for beta emitters (FOREIGN STANDARD)
JIS Z 4501:1988
Testing method of lead equivalent for X-ray protective devices (FOREIGN STANDARD)
JIS Z 4511:2005
Methods of calibration for exposure meters, air kerma meters, air absorbed dose meters and dose-equivalent meters (FOREIGN STANDARD)
JIS Z 4520:2007
Test procedures for germanium gamma-ray detectors (FOREIGN STANDARD)
JIS Z 4601:1997
Radioactive dust samplers (FOREIGN STANDARD)
JIS Z 8110:1995
Colour specification -- Names of light-source colour (FOREIGN STANDARD)
JIS Z 8404-1:2006
Measurement uncertainty -- Part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation (FOREIGN STANDARD)
JIS Z 8601:1954
Preferred numbers (FOREIGN STANDARD)
JIS Z 8701:1999
Colour specification -- The CIE 1931 standard colorimetric system and the CIE 1964 supplementary standard colorimetric system (FOREIGN STANDARD)
JIS Z 8704:1993
Temperature measurement -- Electrical methods (FOREIGN STANDARD)
JIS Z 8705:1992
Method of temperature measurement by liquid-in-glass thermometers (FOREIGN STANDARD)
JIS Z 8705:1992/AMENDMENT 1:2006
Method of temperature measurement by liquid-in-glass thermometers (Amendment 1) (FOREIGN STANDARD)
JIS Z 8706:1980
Methods of temperature measurement by optical pyrometers (FOREIGN STANDARD)
JIS Z 8707:1992
Method of temperature measurement by filled-system thermometers and bimetallic thermometers (FOREIGN STANDARD)
JIS Z 8710:1993
Temperature measurement -- General requirement (FOREIGN STANDARD)
JIS Z 8713:1995
Retroreflectors -- Optical properties -- Vocabulary (FOREIGN STANDARD)
JIS Z 8714:1995
Retroreflectors -- Optical properties -- Measuring method (FOREIGN STANDARD)
JIS Z 8716:1991
Fluorescent lamp as a simulator of CIE standard illuminant D65 for a visual comparison of surface colours -- Type and characteristics (FOREIGN STANDARD)
JIS Z 8717:1989
Methods of measurement for colour of fluorescent objects (FOREIGN STANDARD)
JIS Z 8718:1990
Evaluation method of degree of metamerism for change in observers (FOREIGN STANDARD)
JIS Z 8719:1996
Metamerism index -- Evaluation method of degree of metamerism for change in illuminant (FOREIGN STANDARD)
JIS Z 8721:1993
Colour specification -- Specification according to their three attributes (FOREIGN STANDARD)
JIS Z 8723:2000
Methods for visual comparison of surface colours (FOREIGN STANDARD)
JIS Z 8724:1997
Methods of colour measurement -- Light-source colour (FOREIGN STANDARD)
JIS Z 8726:1990
Method of specifying colour rendering properties of light sources (FOREIGN STANDARD)
JIS Z 8731:1999
Acoustics -- Description and measurement of environmental noise (FOREIGN STANDARD)
JIS Z 8735:1981
Methods of measurement for vibration level (FOREIGN STANDARD)
JIS Z 8741:1997
Specular glossiness -- Method of measurement (FOREIGN STANDARD)
JIS Z 8765:1980
Method of flow measurement by turbine meters (FOREIGN STANDARD)
JIS Z 8803:1991
Viscosity of liquid -- Methods of measurement (FOREIGN STANDARD)
JIS Z 8807:1976
Measuring methods for specific gravity of solid (FOREIGN STANDARD)
JIS Z 8809:2000
Standard liquids for calibrating viscometers (FOREIGN STANDARD)
JIS Z 8812:1987
Measuring methods of eye-hazardous ultraviolet radiation (FOREIGN STANDARD)
JIS Z 8902:1984
Xenon standard white light source (FOREIGN STANDARD)
JIS Z 9090:1991
Measurement -- General rules for calibration system (FOREIGN STANDARD)
JIS Z 9202:1991
General rules for heat balance (FOREIGN STANDARD)
JIS Z 9204:1991
General rules for energy evaluation method by available energy (FOREIGN STANDARD)
JIS C 60695-1-3:1993
Fire hazard testing Part 1: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electrotechnical products Guidance for use preselection procedures (FOREIGN STANDARD)
JIS B 7721:2002
Verification and calibration of the force measuring system of the tension/compression testing machines (FOREIGN STANDARD)
JIS B 7728:2002
Calibration of force-proving instruments used for the verification of uniaxial testing machines (FOREIGN STANDARD)
JIS B 7739:1989
Pendulum-type impact testing machines for non-metallic materials (FOREIGN STANDARD)
JIS B 7751:2007
Light-exposure and light-and-water-exposure apparatus (Enclosed carbon-arc type) (FOREIGN STANDARD)
JIS B 7754:1991
Light-exposure and light-and-water-exposure apparatus (xenon-arc lamp type) (FOREIGN STANDARD)
JIS B 7757:1995
Forced air circulation oven type thermal accelerated aging testers (FOREIGN STANDARD)
JIS B 9921:1997
Light scattering automatic particle counter (FOREIGN STANDARD)
JIS B 9924:1990
Surface particle counters (FOREIGN STANDARD)
JIS B 9925:1997
Light scattering automatic particle counter for liquid (FOREIGN STANDARD)
JIS C 0025:1988
Basic environmental testing procedures Part 2: Tests Test N: Change of temperature (FOREIGN STANDARD)
JIS C 0046:1993
Environmental testing Part 2: Test methods Test Eg: Impact, spring hammer (FOREIGN STANDARD)
JIS C 0099:2005
Environmental testing: Tests -- Test: Test methods for solderability of surface mounting devices (SMD) by wetting balance using lead-free solder paste (FOREIGN STANDARD)
JIS C 1010-2-32:2006
Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-32: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement (FOREIGN STANDARD)
JIS C 2136:2004
Test method for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions (FOREIGN STANDARD)
JIS C 3005:2000
Test methods for rubber or plastic insulated wires and cables (FOREIGN STANDARD)
JIS C 60068-1:1993
Environmental testing Part 1: General and guidance (FOREIGN STANDARD)
JIS C 60068-2-1:1995
Environmental testing procedures Part 2: Tests, Tests A: Cold (FOREIGN STANDARD)
JIS C 60068-2-11:1989
Basic environmental testing procedures Part 2: Tests -- Test Ka: Salt mist (FOREIGN STANDARD)
JIS C 60068-2-13:1989
Basic environmental testing procedures Part 2: Tests, Test M: Low air pressure (FOREIGN STANDARD)
JIS C 60068-2-17:2001
Basic environmental testing procedures -- Part 2: Tests -- Test Q: Sealing (FOREIGN STANDARD)
JIS C 60068-2-18:2007
Environmental testing -- Part 2-18: Tests -- Test R and guidance: Water (FOREIGN STANDARD)
JIS C 60068-2-2:1995
Basic environmental testing procedures Part 2: Tests, Test B: Dry heat (FOREIGN STANDARD)
JIS C 60068-2-20:1996
Basic environmental testing procedures Part 2: Tests. Test T: Soldering (FOREIGN STANDARD)
JIS C 60068-2-27:1995
Basic environmental testing procedures Part 2: Tests, Test Ea and guidance: Shock (FOREIGN STANDARD)
JIS C 60068-2-29:1995
Basic environmental testing procedures Part 2: Tests Test Eb and guidance: Bump (FOREIGN STANDARD)
JIS C 60068-2-30:1988
Basic environmental testing procedures Part 2: Tests Test Db: Damp heat, cyclic (12 + 12-Hour cycle) (FOREIGN STANDARD)
JIS C 60068-2-31:1995
Environmental testing Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens (FOREIGN STANDARD)
JIS C 60068-2-32:1995
Environmental testing Part 2: Tests. Test Ed: Free fall (FOREIGN STANDARD)
JIS C 60068-2-38:1988
Basic environmental testing procedures Part 2: Tests Test Z/AD: Composite temperature/humidity cyclic test (FOREIGN STANDARD)
JIS C 60068-2-40:1995
Environmental testing Part 2: Tests, Test Z/AM: Combined cold/low air pressure tests (FOREIGN STANDARD)
JIS C 60068-2-41:1995
Environmental testing Part 2: Tests, Test Z/BM: Combined dry heat/low air pressure tests (FOREIGN STANDARD)
JIS C 60068-2-42:1993
Basic environmental testing procedures Part 2: Tests Test Kc: Sulphur dioxide test for contacts and connections (FOREIGN STANDARD)
JIS C 60068-2-43:1993
Basic environmental testing procedures Part 2: Tests Test Kd: Hydrogen sulphide test for contacts and connections (FOREIGN STANDARD)
JIS C 60068-2-45:1995
Environmental testing procedures of electronic and electrical resistance to solvents (immersion in cleaning solvents) (FOREIGN STANDARD)
JIS C 60068-2-46:1993
Basic environmental testing procedures Part 2: Tests Guidance to Test Kd: Hydrogen sulphide test for contacts and connections (FOREIGN STANDARD)
JIS C 60068-2-47:2008
Environmental testing -- Part 2-47: Tests -- Mounting of specimens for vibration, impact and similar dynamic tests (Foreign Standard)
JIS C 60068-2-49:1993
Basic environmental testing procedures Part 2: Tests Guidance to Test Kc: Sulphur dioxide test for contacts and connections (FOREIGN STANDARD)
JIS C 60068-2-50:1997
Basic environmental testing procedures Part 2: Tests Tests Z/Afc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens (FOREIGN STANDARD)
JIS C 60068-2-51:1997
Basic environmental testing procedures Part 2: Tests Tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens (FOREIGN STANDARD)
JIS C 60068-2-52:2000
Environmental testing -- Part 2: Tests -- Test Kb: Salt mist, cyclic (sodium, chloride solution) (FOREIGN STANDARD)
JIS C 60068-2-53:1997
Basic environmental testing procedures Part 2: Tests Guidance to tests Z/AFc and Z/BFc: Combined temperature (cold and dry heat) and vibration (sinusoidal) tests (FOREIGN STANDARD)
JIS C 60068-2-54:1996
Environmental testing Part 2: tests. Test Ta: Soldering. Solderability testing by the wetting balance method (FOREIGN STANDARD)
JIS C 60068-2-6:1999
Environmental testing Part 2: Tests -- Test Fc: Vibration (sinusoidal) (FOREIGN STANDARD)
JIS C 60068-2-60:1999
Environmental testing -- Part 2: Tests -- Test Ke: Flowing mixed gas corrosion test (FOREIGN STANDARD)
JIS C 60068-2-61:1996
Environmental testing Part 2: Test methods Test Z/ABDM: Climatic sequence (FOREIGN STANDARD)
JIS C 60068-2-64:1997
Environmental testing Part 2: Test methods -- Test Fh: Vibration, broad-band random (digital control) and guidance (FOREIGN STANDARD)
JIS C 60068-2-66:2001
Environmental testing -- Part 2: Test methods -- Test Cx: Damp heat, steady state (unsaturated pressurized vapour) (FOREIGN STANDARD)
JIS C 60068-2-67:2001
Environmental testing -- Part 2: Tests -- Test Cy: Damp heat, steady state, accelerated test primarily intended for components (FOREIGN STANDARD)
JIS C 60068-2-7:1993
Basic environmental testing procedures Part 2: Tests -- Test Ga and guidance: Acceleration, steady state (FOREIGN STANDARD)
JIS C 60068-2-70:2007
Environmental testing -- Part 2: Tests -- Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands (FOREIGN STANDARD)
JIS C 60068-2-78:2004
Environmental testing -- Part 2-78: Tests -- Test Cab: Damp heat, steady state (FOREIGN STANDARD)
JIS C 60068-2-81:2007
Environmental testing -- Part 2-81: Shock -- Shock response spectrum synthesis (FOREIGN STANDARD)
JIS C 60068-3-1:1995
Background information, Section One -- Cold and dry heat tests (FOREIGN STANDARD)
JIS C 60068-3-3:2000
Environmental testing -- Part 3: Guidance Seismic test method for equipments (FOREIGN STANDARD)
JIS C 60355:1993
An appraisal of the problems of accelerated testing for atmospheric corrosion (FOREIGN STANDARD)
JIS C 60695-10-2:2008
Fire hazard testing -- Part 10-2: Abnormal heat -- Ball pressure test (Foreign Standard)
JIS C 60695-1-1:2000
Fire hazard testing -- Part 1: Guidance for assessing fire hazard of electrotechnical products -- Section 1: General guidance (FOREIGN STANDARD)
JIS C 60695-1-2:1993
Fire hazard testing Part 1: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electerotechnical products Guidance for electronic components (FOREIGN STANDARD)
JIS C 60695-2-3:1987
Fire hazard testing Part 2: Test methods bad-connection test with heaters (FOREIGN STANDARD)
JIS C 60695-2-4-0:1995
Fire hazard testing Part 2: Test methods -- Section 4/sheet 0: Diffusion type and premixed type flame test methods (FOREIGN STANDARD)
JIS C 60695-5-1:1996
Fire hazard testing Part 5: Assessment of potential corrosion damage by fire effluent -- Section 1: General guidance (FOREIGN STANDARD)
JIS C 60695-5-2:1999
Fire hazard testing -- Part 5: Assessment of potential corrosion damage by fire effluent -- Section 2: Guidance on the selection and use of test methods (FOREIGN STANDARD)
JIS C 60695-7-1:1997
Fire hazard testing Part 7: Guidance on the minimization of toxic hazards due to fires involving electrotechnical products Section 1: General (FOREIGN STANDARD)
JIS C 60721-2-1:1995
Classification of environmental conditions Part 2: Environmental conditions appearing in nature Temperature and humidity (FOREIGN STANDARD)
JIS C 60721-2-2:1996
Classification of environmental conditions Part 2: Environmental conditions appearing in nature. Precipitation and wind (FOREIGN STANDARD)
JIS C 60721-2-3:1997
Classification of environmental conditions Part 2: Environmental conditions appearing in nature Air pressure (FOREIGN STANDARD)
JIS C 60721-2-4:1999
Classification of environmental conditions -- Part 2: Environmental conditions appearing in nature. Solar radiation and temperature (FOREIGN STANDARD)
JIS C 60721-3-0:1995
Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Introduction (FOREIGN STANDARD)
JIS C 60721-3-3:1997
Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 3: Stationary use at weatherprotected locations (FOREIGN STANDARD)
JIS C 60721-3-4:1997
Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 4: Stationary use at non-weatherprotected locations (FOREIGN STANDARD)
JIS C 60721-3-7:1999
Classification of environmental conditions -- Part 3: Classification of groups of environmental parameters and their severities. Section 7: Portable and non-stationary use (FOREIGN STANDARD)
JIS C 60721-3-9:2000
Classification of environmental conditions -- Part 3: Classification of groups of environmental parameters and their severities -- Section 9: Microclimates inside products (FOREIGN STANDARD)
JIS G 0585:2002
Radiographic inspection for steel castings (FOREIGN STANDARD)
JIS G 3556:2002
Industrial woven wire cloth (FOREIGN STANDARD)
JIS H 7803:2005
General rules for the determination of particle size and crystallite size in metal catalysts (FOREIGN STANDARD)
JIS H 8667:2002
Test methods for cermet sprayed coatings (FOREIGN STANDARD)
JIS L 0854:2001
Test method for colour fastness to transfer of dye (FOREIGN STANDARD)
JIS Z 2252:1991
Test methods for Vickers hardness at elevated temperatures (FOREIGN STANDARD)
JIS Z 2255:2003
Method for ultra-low loaded hardness test (FOREIGN STANDARD)
JIS Z 2314:1991
Test methods for performance characteristics of eddy current testing instruments (FOREIGN STANDARD)
JIS Z 2315:1991
Test methods for performance characteristics of eddy current flaw detecting system (FOREIGN STANDARD)
JIS Z 2319:1991
Methods for magnetic leakage flux testing (FOREIGN STANDARD)
JIS Z 2320-1:2007
Non-destructive testing -- Magnetic particle testing -- Part 1: General principles (FOREIGN STANDARD)
JIS Z 2320-2:2007
Non-destructive testing -- Magnetic particle testing -- Part 2: Detection media (FOREIGN STANDARD)
JIS Z 2320-3:2007
Non-destructive testing -- Magnetic particle testing -- Part 3: Equipment (FOREIGN STANDARD)
JIS Z 2321:1993
AC yoke magnet for magnetic particle testing (FOREIGN STANDARD)
JIS Z 2329:2002
Methods for bubble leak testing (FOREIGN STANDARD)
JIS Z 2330:1992
Standard recommended guide for the selection of helium leak testing (FOREIGN STANDARD)
JIS Z 2331:2006
Method for helium leak testing (FOREIGN STANDARD)
JIS Z 2332:1993
Test method for leaks using the pressure change measurement (FOREIGN STANDARD)
JIS Z 2333:2005
Test method for leaks using ammonia gas (FOREIGN STANDARD)
JIS Z 2340:2002
Confirmation method of calibration by visual calibration gauge on magnetic particle and liquid penetrant testing (FOREIGN STANDARD)
JIS Z 2343-1:2001
Non-destructive testing -- Penetrant testing -- Part 1: General principles -- Method for liquid penetrant testing and classification of the penetrant indication (FOREIGN STANDARD)
JIS Z 2343-2:2001
Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials (FOREIGN STANDARD)
JIS Z 2343-3:2001
Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks (FOREIGN STANDARD)
JIS Z 2343-4:2001
Non-destructive testing -- Penetrant testing -- Part 4: Equipment (FOREIGN STANDARD)
JIS Z 2345:2000
Standard test blocks for ultrasonic testing (FOREIGN STANDARD)
JIS Z 2350:2002
Method for measurement of performance characteristics of ultrasonic probes (FOREIGN STANDARD)
JIS Z 2351:1992
Method for assessing the electrical characteristics of ultrasonic testing instrument using pulse echo technique (FOREIGN STANDARD)
JIS Z 2352:1992
Method for assessing the overall performance characteristics of ultrasonic pulse echo testing instrument (FOREIGN STANDARD)
JIS Z 2354:1992
Method for measurement of ultrasonic attenuation coefficient of solid by pulse echo technique (FOREIGN STANDARD)
JIS Z 2355:2005
Methods for measurement of thickness by ultrasonic pulse echo technique (FOREIGN STANDARD)
JIS Z 2356:2006
Method of automatic ultrasonic inspection for graphite ingot (FOREIGN STANDARD)
JIS Z 2381:2001
General requirements for atmospheric exposure test (FOREIGN STANDARD)
JIS Z 3060:2002
Method for ultrasonic examination for welds of ferritic steel (FOREIGN STANDARD)
JIS Z 3105:2003
Methods of radiographic examination for welded joints in aluminium (FOREIGN STANDARD)
JIS Z 4560:1991
Industrial gamma-ray apparatus for radiography (FOREIGN STANDARD)
JIS Z 4561:1992
Viewing illuminators for industrial radiograph (FOREIGN STANDARD)
JIS Z 4606:2007
Industrial X-ray apparatus for radiographic testing (FOREIGN STANDARD)
JIS Z 4614:1993
Source container of measuring instrument utilizing ionizing radiation (FOREIGN STANDARD)
JIS Z 8703:1983
Standard atmospheric conditions for testing (FOREIGN STANDARD)
JIS Z 8801-1:2006
Test sieves -- Part 1: Test sieves of metal wire cloth (FOREIGN STANDARD)
JIS Z 8801-2:2000
Test sieves -- Part 2: Test sieves of perforated metal plate (FOREIGN STANDARD)
JIS Z 8801-3:2000
Test sieves -- Part 3: Test sieves of electroformed sheets (FOREIGN STANDARD)
JIS Z 8816:2001
Particulate materials -- General requirements for methods of sampling (FOREIGN STANDARD)
JIS Z 8820-2:2004
Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 2: Fixed pipette method (FOREIGN STANDARD)
JIS Z 8823-2:2004
Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 2: Photocentrifuge method (FOREIGN STANDARD)
JIS Z 8841:1993
Granules and agglomerates -- Test methods for strength (FOREIGN STANDARD)
JIS Z 8909-1:2005
Test method of filter media for dust collection Part 1: Filter efficiency (FOREIGN STANDARD)
JIS Z 8909-2:2008
Test method of filter media for dust collection -- Part 2: Test on durability under simulated running conditions (FOREIGN STANDARD)
JIS Z 8909-3:2008
Test method of filter media for dust collection -- Part 3: Test for durability under high temperature (FOREIGN STANDARD)
JIS Z 8910:2007
Test method of filter media for dust collection -- Sampling and test method for fabric filter durability (FOREIGN STANDARD)

JIS K 6372:1995
Synchronous belts for general power transmission (FOREIGN STANDARD)
Classical V-belts for power transmission (Foreign Standard)
JIS K 6323:2008
Cold-rolled steel strips for springs (FOREIGN STANDARD)
JIS G 4802:2005
JIS G 3104:2004
Steel bars for rivets (FOREIGN STANDARD)
JIS E 1107:2008
Steel bolts and nuts for fish-plates and fastenings (Foreign Standard)
Automotive parts -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid (FOREIGN STANDARD)
JIS D 2610:2005
Grease guns (FOREIGN STANDARD)
JIS B 9808:1991
JIS B 7141:2003
Microscope -- Screw thread for objectives (FOREIGN STANDARD)
Jig bushes and accessories (FOREIGN STANDARD)
JIS B 5201:1998
JIS B 4356:1996/AMENDMENT 1:2009
Pinion type cutters (Amendment 1) (Foreign Standard)
JIS B 4356:1996
Pinion type cutters (FOREIGN STANDARD)
JIS B 4351:1985/AMENDMENT 1:2009
Straight bevel gear generating cutters (Type G) (Amendment 1) (Foreign Standard)
JIS B 4351:1985
Straight bevel gear generating cutters (type G) (FOREIGN STANDARD)
Involute gear milling cutters (Amendment 1) (Foreign Standard)
JIS B 4232:1996/AMENDMENT 1:2009
Involute gear milling cutters (FOREIGN STANDARD)
JIS B 4232:1996
JIS B 2809:1996/AMENDMENT 1:2009
Wire ropes -- Grips for rope or wire strand (Amendment 1) (Foreign Standard)
JIS B 2809:1996
Wire ropes -- Grips for rope or wire strand (FOREIGN STANDARD)
JIS B 2808:2005
Spring pins (FOREIGN STANDARD)
JIS B 2804:2001
Retaining rings (FOREIGN STANDARD)
JIS B 2710-4:2008
Leaf springs -- Part 4: Specification of products (FOREIGN STANDARD)
JIS B 2710-3:2008
Leaf springs -- Part 3: Method of testing (FOREIGN STANDARD)
JIS B 2710-2:2008
Leaf springs -- Part 2: Design method (FOREIGN STANDARD)
JIS B 2710-1:2008
Leaf springs -- Part 1: Terms and definitions (FOREIGN STANDARD)
Helical torsion springs -- Requirements for design, performance test method (FOREIGN STANDARD)
JIS B 2709:2000
Coned disc springs (FOREIGN STANDARD)
JIS B 2706:2001
Helical compression and extension springs -- Requirements for design, performance test method (FOREIGN STANDARD)
JIS B 2704:2000
JIS B 2405:2003
Mechanical seals -- General requirements (FOREIGN STANDARD)
JIS B 2402-5:2002
Rotary shaft lip type seals -- Part 5: Identification of visual imperfections (FOREIGN STANDARD)
JIS B 2402-4:2002
Rotary shaft lip type seals -- Part 4: Performance test procedures (FOREIGN STANDARD)
JIS B 2402-3:2002
Rotary shaft lip type seals -- Part 3: Storage, handling and installation (FOREIGN STANDARD)
JIS B 2402-1:2002
Rotary shaft lip type seals -- Part 1: Nominal dimensions and tolerances (FOREIGN STANDARD)
Belt drives -- Pulleys and V-ribbed belts for industrial applications (FOREIGN STANDARD)
JIS B 1858:2005
Curvilinear toothed synchronous belt drive systems for general power transmission -- Part 2: Pulley (FOREIGN STANDARD)
JIS B 1857-2:2001
Curvilinear toothed synchronous belt drive systems for general power transmission -- Part 1: Belt (FOREIGN STANDARD)
JIS B 1857-1:2001
JIS B 1856:1993
Synchronous belt drives -- Pulleys (FOREIGN STANDARD)
Grooved pulleys for narrow V-belts (FOREIGN STANDARD)
JIS B 1855:1991
Grooved pulleys for classical V-belts (FOREIGN STANDARD)
JIS B 1854:1987
JIS B 1852:1980
Pulleys for flat transmission belts (FOREIGN STANDARD)
Fatigue test method for transmission precision roller chains (Foreign Standard)
JIS B 1811:2008
Guidance on the selection of roller chain drives (FOREIGN STANDARD)
JIS B 1810:1999
Gears -- Surface temper etch inspection after grinding (Foreign Standard)
JIS B 1756:2008
JIS B 1751:1976
Master cylindrical gears (FOREIGN STANDARD)
Dimensions of cylindrical worm gears (FOREIGN STANDARD)
JIS B 1723:1977
JIS B 1706-2:1999
Straight bevel gears for general engineering and heavy engineering Part 2: Modules and diametral pitches (FOREIGN STANDARD)
JIS B 1706-1:1999
Straight bevel gear for general engineering -- Part 1: Basic rack (FOREIGN STANDARD)
Backlashes for bevel gears (FOREIGN STANDARD)
JIS B 1705:1973
Accuracy for bevel gears (FOREIGN STANDARD)
JIS B 1704:1978
Cylindrical gears -- The accuracy -- Part 3: Definitions and allowable values of deviations relevant to corresponding flanks of the gear teeth and radial composite deviations of injection molding plastic gears (Foreign Standard)
JIS B 1702-3:2008
Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information (FOREIGN STANDARD)
JIS B 1702-2:1998
Cylindrical gears -- ISO system of accuracy -- Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth (FOREIGN STANDARD)
JIS B 1702-1:1998
Cylindrical gears for general engineering and for heavy engineering -- Part 2: Modules (FOREIGN STANDARD)
JIS B 1701-2:1999
Cylindrical gears for general and heavy engineering -- Part 1: Standard basic rack tooth profile (FOREIGN STANDARD)
JIS B 1701-1:1999
JIS B 1603:1995
Straight cylindrical involute splines -- side fit -- Generalities, dimensions and inspection (FOREIGN STANDARD)
JIS B 1601:1996
Straight-sided splines for cylindrical shafts with internal centering -- Dimensions, tolerances and verification (FOREIGN STANDARD)
Bushes for journal bearings (FOREIGN STANDARD)
JIS B 1582:1996
JIS B 1566:1989
Mounting dimensions and fits for rolling bearings (FOREIGN STANDARD)
JIS B 1554:2005
Rolling bearings -- Locknuts and locking devices (FOREIGN STANDARD)
JIS B 1552:2005
Rolling bearings -- Adapter assemblies, Adapter sleeves and Withdrawal sleeves (FOREIGN STANDARD)
JIS B 1539:1993
Rolling bearings -- Self-aligning thrust roller bearings (FOREIGN STANDARD)
JIS B 1536-5:2008
Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 5: Track rollers (Foreign Standard)
JIS B 1536-4:2008
Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 4: Thrust needle roller and cage assemblies, thrust washers (Foreign Standard)
JIS B 1536-3:2008
Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 3: Radial needle roller and cage assemblies (Foreign Standard)
JIS B 1536-2:2008
Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 2: Drawn cup without inner ring (Foreign Standard)
JIS B 1536-1:2008
Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 1: Dimension series 48, 49 and 69 (Foreign Standard)
JIS B 1535:1993
Rolling bearings -- Self-aligning roller bearings (FOREIGN STANDARD)
JIS B 1534:1993
Rolling bearings -- Tapered roller bearings (FOREIGN STANDARD)
JIS B 1533:1993
Rolling bearings -- Cylindrical roller bearings (FOREIGN STANDARD)
JIS B 1532:1993
Rolling bearings -- Thrust ball bearings with flat back faces (FOREIGN STANDARD)
JIS B 1523:1993
Rolling bearings -- Self-aligning ball bearings (FOREIGN STANDARD)
JIS B 1522:1993
Rolling bearings -- Angular contact ball bearings (FOREIGN STANDARD)
JIS B 1521:1993
Rolling bearings -- Deep groove ball bearings (FOREIGN STANDARD)
JIS B 1520:1995
Rolling bearings -- Radial internal clearance (FOREIGN STANDARD)
Dynamic load ratings and rating life for rolling bearings (FOREIGN STANDARD)
JIS B 1518:1992
JIS B 1517:1984
Packaging of rolling bearings (FOREIGN STANDARD)
JIS B 1516:1987
Marking on rolling bearings and packages (FOREIGN STANDARD)
JIS B 1515-2:2006
Rolling bearings -- Tolerances -- Part 2: Measuring and gauging principles and methods (FOREIGN STANDARD)
JIS B 1514-3:2006
Rolling bearings -- Tolerances of bearings -- Part 3: Chamfer dimensions -- Maximum values (FOREIGN STANDARD)
JIS B 1514-2:2006
Rolling bearings -- Tolerances of bearings -- Part 2: Thrust bearings (FOREIGN STANDARD)
JIS B 1514-1:2006
Rolling bearings -- Tolerances of bearings -- Part 1: Radial bearings (FOREIGN STANDARD)
JIS B 1513:1995
Rolling bearings -- Designation (FOREIGN STANDARD)
JIS B 1512:2000
Rolling bearings -- Boundary dimensions (FOREIGN STANDARD)
JIS B 1511:1993
Rolling bearings -- General code (FOREIGN STANDARD)
JIS B 1509:2005
Rolling bearings -- Radial bearings with locating snap ring -- Dimensions and tolerances (FOREIGN STANDARD)
JIS B 1506:2005
Rolling bearings -- Rollers (FOREIGN STANDARD)
JIS B 1456:1989/AMENDMENT 1:2009
Roller chain shaft couplings (Amendment 1) (Foreign Standard)
JIS B 1456:1989
Roller chain shaft couplings (FOREIGN STANDARD)
JIS B 1455:1988
Rubber shaft couplings (FOREIGN STANDARD)
JIS B 1454:1988
Universal ball joints (FOREIGN STANDARD)
Geared type shaft couplings (FOREIGN STANDARD)
JIS B 1453:1988
Flexible flanged shaft couplings (FOREIGN STANDARD)
JIS B 1452:1991
JIS B 1451:1991
Rigid flanged shaft couplings (FOREIGN STANDARD)
JIS B 1360:2006
Snap pins (FOREIGN STANDARD)
JIS B 1359:1990
Parallel pins with internal thread (FOREIGN STANDARD)
JIS B 1358:1990
Taper pins with thread (FOREIGN STANDARD)
Dowel pins (parallel pins, hardened) (FOREIGN STANDARD)
JIS B 1355:1990
JIS B 1354:1988
Parallel pins (FOREIGN STANDARD)
JIS B 1353:1990
Taper pins with split (FOREIGN STANDARD)
JIS B 1352:1988
Taper pins (FOREIGN STANDARD)
JIS B 1351:1987
Split pins (FOREIGN STANDARD)
JIS B 1301:1996
Keys and their corresponding keyways (FOREIGN STANDARD)
JIS B 1258:2006
Plain washers for screw and washer assemblies -- Small, normal and large series -- Product grade A (FOREIGN STANDARD)
JIS B 1257:2004
Plain washers for tapping screw and washer assemblies -- Normal and large series -- Product grade A (FOREIGN STANDARD)
JIS B 1256:2008
Plain washers (Foreign Standard)
JIS B 1251:2001
Spring lock washers (FOREIGN STANDARD)
JIS B 1250:2008
Plain washers for metric bolts, screws and nuts for general purposes -- General plan (FOREIGN STANDARD)
JIS B 1216:2006
Push-on spring nuts (FOREIGN STANDARD)
JIS B 1215:1976
Semi-tubular rivets (FOREIGN STANDARD)
Hot headed rivets (FOREIGN STANDARD)
JIS B 1214:1995
Cold headed rivets (FOREIGN STANDARD)
JIS B 1213:1995
Hexagon weld nuts with flange (FOREIGN STANDARD)
JIS B 1200:2007
JIS B 1199-4:2001
Prevailing torque type nuts -- Part 4: All-metal hexagon nuts with flange (FOREIGN STANDARD)
JIS B 1199-3:2001
Prevailing torque type nuts -- Part 3: Hexagon nuts with flange with non-metallic insert (FOREIGN STANDARD)
JIS B 1199-2:2001
Prevailing torque type nuts -- Part 2: All-metal hexagon nuts (FOREIGN STANDARD)
JIS B 1199-1:2001/AMENDMENT 1:2008
Prevailing torque type nuts -- Part 1: Hexagon nuts with non-metallic insert (Amendment 1) (FOREIGN STANDARD)
JIS B 1199-1:2001
Prevailing torque type nuts -- Part 1: Hexagon nuts with non-metallic insert (FOREIGN STANDARD)
Headed studs (FOREIGN STANDARD)
JIS B 1198:1995
JIS B 1196:2001
Weld nuts (FOREIGN STANDARD)
JIS B 1195:1994
Weld bolts (FOREIGN STANDARD)
Hexagon socket countersunk head screws (FOREIGN STANDARD)
JIS B 1194:2006
Ball splines (FOREIGN STANDARD)
JIS B 1193:2004
Ball screws (FOREIGN STANDARD)
JIS B 1192:1997
Hexagon nuts with flange (FOREIGN STANDARD)
JIS B 1190:2005
Hexagon flange bolts (FOREIGN STANDARD)
JIS B 1189:2005
Cross recessed head screws with captive washer (FOREIGN STANDARD)
JIS B 1188:1995
Hexagon head screws with captive washer (FOREIGN STANDARD)
JIS B 1187:1995
JIS B 1186:1995/AMENDMENT 1:2007
Sets of high strength hexagon bolt, hexagon nut and plain washers for friction grip joints (Amendment 1) (FOREIGN STANDARD)
JIS B 1186:1995
Sets of high strength hexagon bolt, hexagon nut and plain washers for friction grip joints (FOREIGN STANDARD)
JIS B 1185:1994
Wing nuts (FOREIGN STANDARD)
JIS B 1184:1994
Wing bolts (FOREIGN STANDARD)
Domed cap nuts (FOREIGN STANDARD)
JIS B 1183:2001
JIS B 1182:1995
Square head bolts (FOREIGN STANDARD)
Hexagon nuts and hexagon thin nuts (FOREIGN STANDARD)
JIS B 1181:2004
Hexagon head bolts and hexagon head screws (FOREIGN STANDARD)
JIS B 1180:2004
Flat head bolts (FOREIGN STANDARD)
JIS B 1179:1994
Foundation bolts (FOREIGN STANDARD)
JIS B 1178:1994
Hexagon socket set screws (FOREIGN STANDARD)
JIS B 1177:2007
Hexagon socket head cap screws (FOREIGN STANDARD)
JIS B 1176:2006
Hexagon socket head shoulder screws (FOREIGN STANDARD)
JIS B 1175:1988
Hexagon socket button head screws (FOREIGN STANDARD)
JIS B 1174:2006
JIS B 1173:1995
Studs (FOREIGN STANDARD)
Cup head square neck bolts (FOREIGN STANDARD)
JIS B 1171:2005
Hexagon slotted and castle nuts (FOREIGN STANDARD)
JIS B 1170:2001
Eyenuts (FOREIGN STANDARD)
JIS B 1169:1994
Eyebolts (FOREIGN STANDARD)
JIS B 1168:1994
JIS B 1167:2001
T-Slot nuts (FOREIGN STANDARD)
JIS B 1166:1995
T-Slot bolts (FOREIGN STANDARD)
JIS B 1163:2001
Square nuts (FOREIGN STANDARD)
Hexalobular socket head cap screws (FOREIGN STANDARD)
JIS B 1136:2004
JIS B 1135:1995
Slotted head wood screws (FOREIGN STANDARD)
JIS B 1130:2006
Screw and washer assemblies with plain washers -- Washer hardness classes 200 HV and 300 HV (FOREIGN STANDARD)
JIS B 1129:2004
Tapping screw washer assemblies with plain washers (FOREIGN STANDARD)
Hexalobular socket head tapping screws (FOREIGN STANDARD)
JIS B 1128:2004
Hexagon flange head tapping screws (FOREIGN STANDARD)
JIS B 1127:1995
Hexagon washer hear tapping screws (FOREIGN STANDARD)
JIS B 1126:1995
JIS B 1125:2003
Self drilling tapping screws (FOREIGN STANDARD)
Drilling screws with tapping screw thread (FOREIGN STANDARD)
JIS B 1124:2003
Hexagon head tapping screws (FOREIGN STANDARD)
JIS B 1123:1996
Cross recessed head tapping screws (FOREIGN STANDARD)
JIS B 1122:1996
JIS B 1119:1995
Machine screws and nuts for spectacle frames (FOREIGN STANDARD)
JIS B 1118:1995
Square head set screws (FOREIGN STANDARD)
JIS B 1117:1995
Slotted set screws (FOREIGN STANDARD)
JIS B 1115:1996
Slotted head tapping screws (FOREIGN STANDARD)
Cross-recessed head wood screws (FOREIGN STANDARD)
JIS B 1112:1995
Cross recessed head screws (FOREIGN STANDARD)
JIS B 1111:1996
Hexalobular socket head screws (FOREIGN STANDARD)
JIS B 1107:2004
JIS B 1101:1996
Slotted head screws (FOREIGN STANDARD)
Fasteners -- General requirements for bolts, screws, studs and nuts (FOREIGN STANDARD)
JIS B 1099:2005
Fasteners -- Quality assurance system (FOREIGN STANDARD)
JIS B 1092:2006
Fasteners -- Acceptance inspection (FOREIGN STANDARD)
JIS B 1091:2003
Blind rivets -- Mechanical testing (FOREIGN STANDARD)
JIS B 1087:2004
JIS B 1086:1998
Widening test on nuts (FOREIGN STANDARD)
Cone proof load test on nuts (FOREIGN STANDARD)
JIS B 1085:1995
Fasteners -- Torque/clamp force testing (FOREIGN STANDARD)
JIS B 1084:2007
General rules for tightening of threaded fasteners (Foreign Standard)
JIS B 1083:2008
JIS B 1081:1997
Threaded fasteners -- Axial load fatigue testing -- Test methods and evaluation of results (FOREIGN STANDARD)
JIS B 1071:1985
Method of verification for size and geometry of threaded fasteners (FOREIGN STANDARD)
JIS B 1060:2003
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws (FOREIGN STANDARD)
Drilling screws with tapping screw thread -- Mechanical and functional properties (FOREIGN STANDARD)
JIS B 1059:2001
JIS B 1058:1995
Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (FOREIGN STANDARD)
JIS B 1057:2001
Mechanical properties of non-ferrous metal fasteners (FOREIGN STANDARD)
JIS B 1056:2000
Prevailing torque type steel hexagon nuts -- Mechanical and performance properties (FOREIGN STANDARD)
JIS B 1055:1995
Tapping screws -- Mechanical properties (FOREIGN STANDARD)
JIS B 1054-4:2006
Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 4: Tapping screws (FOREIGN STANDARD)
JIS B 1054-3:2001
Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress (FOREIGN STANDARD)
JIS B 1054-2:2001
Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 2: Nuts (FOREIGN STANDARD)
JIS B 1054-1:2001
Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 1: Bolts, screw and studs (FOREIGN STANDARD)
JIS B 1053:1999
Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners not under tensile stresses (FOREIGN STANDARD)
JIS B 1052:1998
Mechanical properties of steel nuts (FOREIGN STANDARD)
JIS B 1051:2000
Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs (FOREIGN STANDARD)
Fasteners -- Hot dip galvanized coatings (FOREIGN STANDARD)
JIS B 1048:2007
JIS B 1047:2006
Passivation of corrosion-resistant stainless-steel fasteners (FOREIGN STANDARD)
Fasteners -- Non-electrolytically applied zinc flake coatings (FOREIGN STANDARD)
JIS B 1046:2005
Fasteners -- Preloading test for the detection of hydrogen embrittlement -- Parallel bearing surface method (FOREIGN STANDARD)
JIS B 1045:2001
Fasteners -- Electroplated coatings (FOREIGN STANDARD)
JIS B 1044:2001
Fasteners -- Surface discontinuities -- Part 3: Bolts, screws and studs for special requirements (FOREIGN STANDARD)
JIS B 1043:1993
Fasteners -- Surface discontinuities -- Part 2: Nuts (FOREIGN STANDARD)
JIS B 1042:1998
Fasteners -- Surface discontinuities -- Part 1: Bolts, screws and studs for general requirements (FOREIGN STANDARD)
JIS B 1041:1993
JIS B 1022:2008
Tolerances for fasteners -- Part 3: Plain washers for bolts, screws and nuts -- Product grades A and C (FOREIGN STANDARD)
JIS B 1021:2003
Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C (FOREIGN STANDARD)
Countersinks for countersunk head screws (FOREIGN STANDARD)
JIS B 1017:2008
Gauging of hexagon sockets (FOREIGN STANDARD)
JIS B 1016:2006
Hexalobular internal driving feature for bolts and screws (FOREIGN STANDARD)
JIS B 1015:2008
Countersunk flat head screws -- Part 2: Penetration depth of cross recesses (FOREIGN STANDARD)
JIS B 1014:1994
Countersunk head screws -- Head configuration and gauging (FOREIGN STANDARD)
JIS B 1013:1994
Cross recesses for screws (FOREIGN STANDARD)
JIS B 1012:1985
Centre holes (FOREIGN STANDARD)
JIS B 1011:1987
Designation system for fasteners (FOREIGN STANDARD)
JIS B 1010:2003
Bolts, screws and studs -- Nominal lengths, and thread lengths for general purpose bolts (FOREIGN STANDARD)
JIS B 1009:1991
JIS B 1008:1988
Split pin holes and wire holes for bolts, screws and studs (FOREIGN STANDARD)
JIS B 1007:2003
Tapping screws thread (FOREIGN STANDARD)
General purpose bolts and screws -- Metric series -- Radii under the head (FOREIGN STANDARD)
JIS B 1005:2003
Fasteners -- Ends of parts with exterenal ISO metric thread (FOREIGN STANDARD)
JIS B 1003:2003
Dimensions of widths across flats (FOREIGN STANDARD)
JIS B 1002:1985
Diameter of clearance holes and counterbores for bolts and screws (FOREIGN STANDARD)
JIS B 1001:1985
JIS B 0911:2000
Mechanical vibration -- Susceptibility and sensitivity of machines to unbalance (FOREIGN STANDARD)
JIS B 0905:1992
Rotating machines -- Balance quality requirements of rigid rotors (FOREIGN STANDARD)
Conical shaft ends for cone taper ratio 1:10 (FOREIGN STANDARD)
JIS B 0904:2001
Cylindrical shaft ends (FOREIGN STANDARD)
JIS B 0903:2001
Driving and driven machines -- Shaft heights (FOREIGN STANDARD)
JIS B 0902:2001
Diameter of shafts (FOREIGN STANDARD)
JIS B 0901:1977
Edge quality and its grades for material removal parts (FOREIGN STANDARD)
JIS B 0721:2004
JIS B 0271:2004
Three wires for screw thread measuring and four wires for screw thread measuring (FOREIGN STANDARD)
Inspection method for taper screw gauges (FOREIGN STANDARD)
JIS B 0262:1989
JIS B 0261:2004
Parallel screw thread gauges -- Measuring method of gauges (FOREIGN STANDARD)
JIS B 0255:1998/AMENDMENT 1:2008
Limit gauges for unified screw threads (Amendment 1) (FOREIGN STANDARD)
JIS B 0255:1998
Limit gauges for unified screw threads (FOREIGN STANDARD)
JIS B 0254:1985
Screw thread limit gauges for parallel pipe threads (FOREIGN STANDARD)
Gauges for taper pipe threads (FOREIGN STANDARD)
JIS B 0253:1985
Cycle threads (FOREIGN STANDARD)
JIS B 0225:1960
JIS B 0218:1980
Limit of sizes and tolerances for metric trapezoidal screw threads (FOREIGN STANDARD)
JIS B 0217:1980
Tolerance system for metric trapezoidal screw threads (FOREIGN STANDARD)
JIS B 0216:1987
Metric trapezoidal screw threads (FOREIGN STANDARD)
JIS B 0212:1973
Limits of sizes and tolerances for unified fine screw threads (FOREIGN STANDARD)
JIS B 0210:1973
Limits of sizes and tolerances for unified coarse screw threads (FOREIGN STANDARD)
ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (FOREIGN STANDARD)
JIS B 0209-5:2001
ISO general purpose metric screw threads -- Tolerances -- Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (FOREIGN STANDARD)
JIS B 0209-4:2001
ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads (FOREIGN STANDARD)
JIS B 0209-3:2001
ISO general purpose metric screw threads -- Tolerances -- Part 2: Limits of sizes for general purpose external and internal screw threads -- Medium quality (FOREIGN STANDARD)
JIS B 0209-2:2001
ISO general purpose metric screw threads -- Tolerances -- Part 1: Principles and basic data (FOREIGN STANDARD)
JIS B 0209-1:2001
JIS B 0208:1973
Unified fine screw threads (FOREIGN STANDARD)
JIS B 0206:1973
Unified coarse screw threads (FOREIGN STANDARD)
ISO general purpose metric screw threads -- Part 4: Basic dimensions (FOREIGN STANDARD)
JIS B 0205-4:2001
ISO general purpose metric screw threads -- Part 3: Selected sizes for screws, bolts and nuts (FOREIGN STANDARD)
JIS B 0205-3:2001
ISO general purpose metric screw threads -- Part 2: General plan (FOREIGN STANDARD)
JIS B 0205-2:2001
ISO general purpose metric screw threads -- Part 1: Basic profile (FOREIGN STANDARD)
JIS B 0205-1:2001
JIS B 0203:1999
Taper pipe threads (FOREIGN STANDARD)
JIS B 0202:1999
Parallel pipe threads (FOREIGN STANDARD)
JIS B 0201:1973
Miniature screw threads (FOREIGN STANDARD)
JIS B 0163-2:2007
Plain bearings -- Symbols -- Part 2: Applications (FOREIGN STANDARD)
JIS B 0163-1:2007
Plain bearings -- Symbols -- Part 1: Basic symbols (FOREIGN STANDARD)
Designation system for screw threads (FOREIGN STANDARD)
JIS B 0123:1999
JIS A 5529:1995/AMENDMENT 1:2008
Pins and studs for powder actuated tool (Amendment 1) (FOREIGN STANDARD)
JIS A 5529:1995
Pins and studs for powder actuated tool (FOREIGN STANDARD)
JIS A 5508:2005
Nails (FOREIGN STANDARD)
JIS Z 9102:1987
Identification marking for piping systems (FOREIGN STANDARD)
JIS Z 8753:1989
Measuring methods of low pressures by thermal conductivity gauge (FOREIGN STANDARD)
JIS Z 8752:1989
Measuring methods of low pressures by hot cathode and cold cathode ionization gauges (FOREIGN STANDARD)
JIS S 3022:2003
Oil discharge rubber hoses for oil burning appliances (FOREIGN STANDARD)
JIS S 2145:1991/AMENDMENT 2:2009
Metallic flexible hoses for gas (Amendment 2) (Foreign Standard)
JIS S 2145:1991/AMENDMENT 1:2006
Metallic flexible hoses for gas (Amendment 1) (FOREIGN STANDARD)
JIS S 2145:1991
Metallic flexible hoses for gas (FOREIGN STANDARD)
JIS K 7042:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of cemented or wrapped rigid joints (FOREIGN STANDARD)
JIS K 7040:1998
Plastics piping systems -- Glass-reinforced plastics (GRP) components -- Determination of the amount of constituents using the gravimetric method (FOREIGN STANDARD)
JIS K 7039:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and calculation of the long-term ultimate relative ring deflection, both under wet conditions (FOREIGN STANDARD)
JIS K 7038:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection (FOREIGN STANDARD)
JIS K 7037:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the apparent initial circumferential tensile strength (FOREIGN STANDARD)
JIS K 7036:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints (FOREIGN STANDARD)
JIS K 7035:1998
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness (FOREIGN STANDARD)
JIS K 7033:1998
Plastics piping systems -- Pipes made of glass-reinforced thermosetting plastics (GRP) -- Determination of initial tensile properties (FOREIGN STANDARD)
JIS K 7032:2002
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness (FOREIGN STANDARD)
JIS K 7030:1997
Pipes and fittings made of glass fiber reinforced thermosetting plastics (GRP) -- Definitions of terms relating pressure, including relationship between them, and terms for installation and jointing (FOREIGN STANDARD)
JIS K 7020:1998
Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use (FOREIGN STANDARD)
JIS K 7014:1997
Fittings and joints for fibre reinforced plastic pipes (FOREIGN STANDARD)
JIS K 7013:1997
Fibre reinforced plastic pipes (FOREIGN STANDARD)
JIS K 6914:1995/AMENDMENT 1:2006
Laminated thermosetting tubes (Amendment 1) (FOREIGN STANDARD)
JIS K 6914:1995
Laminated thermosetting tubes (FOREIGN STANDARD)
JIS K 6816:2008
Thermoplastics pipes and fittings -- Test method for Vicat softening temperature (Foreign Standard)
JIS K 6814:2008
Thermoplastics pipes -- Thermal reversion test method (Foreign Standard)
JIS K 6812:2003
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds (FOREIGN STANDARD)
JIS K 6796:1998
Pipes and fitting made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content (FOREIGN STANDARD)
JIS K 6795:1998
Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength (FOREIGN STANDARD)
JIS K 6793:2004
Polybutene (PB) pipe fittings for water supply (FOREIGN STANDARD)
JIS K 6792:2004
Polybutene (PB) pipes for water supply (FOREIGN STANDARD)
JIS K 6788:2004
Crosslinked polyethylene (PE-X) pipe fittings for water supply (FOREIGN STANDARD)
JIS K 6787:2004
Crosslinked polyethylene (PE-X) pipes for water supply (FOREIGN STANDARD)
JIS K 6780:2003/AMENDMENT 1:2008
Profile wall polyethylene pipes(Amendment 1) (Foreign Standard)
JIS K 6780:2003
Profile wall polyethylene pipes (FOREIGN STANDARD)
JIS K 6779:2004
Polybutene (PB) pipe fittings (FOREIGN STANDARD)
JIS K 6778:2004
Polybutene (PB) pipes (FOREIGN STANDARD)
JIS K 6777:2007
Chlorinated poly (vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply (FOREIGN STANDARD)
JIS K 6776:2007
Chlorinated poly (vinyl chloride) (PVC-C) pipes for hot and cold water supply (FOREIGN STANDARD)
JIS K 6771:1995
Flexible vinyl tube (FOREIGN STANDARD)
JIS K 6770:2004/AMENDMENT 1:2008
Crosslinked polyethylene (PE-X) pipe fittings (Amendment 1) (FOREIGN STANDARD)
JIS K 6770:2004
Crosslinked polyethylene (PE-X) pipe fittings (FOREIGN STANDARD)
JIS K 6769:2004
Crosslinked polyethylene (PE-X) pipes (FOREIGN STANDARD)
JIS K 6762:2004
Double wall polyethylene pipes for water supply (FOREIGN STANDARD)
JIS K 6761:2004
Polyethylene pipes for General Purposes (FOREIGN STANDARD)
JIS K 6741:2007
Unplasticized poly (vinyl chloride) (PVC-U) pipes (FOREIGN STANDARD)
JIS K 6375:1999
Plastics hoses and hose assemblies -- Thermoplastics, textile-reinforced, hydraulic type -- Specification (FOREIGN STANDARD)
JIS K 6349-3:1999
Wire reinforced rubber hoses for hydraulic -- Part 3: Wire reinforced rubber hoses (FOREIGN STANDARD)
JIS K 6349-2:1999
Wire reinforced rubber hoses for hydraulic -- Part 2: Rubber hoses and hose assemblies -- Rubber-covered, spiral wire reinforced, hydraulic type -- Specification (FOREIGN STANDARD)
JIS K 6349-1:1999
Wire reinforced rubber hoses for hydraulic -- Part 1: Rubber hoses and hose assemblies -- Wire-reinforced hydraulic type -- Specification (FOREIGN STANDARD)
JIS K 6330-9:2003
Testing methods for rubber and plastics hoses -- Part 9: Bending properties of hoses and tubing (FOREIGN STANDARD)
JIS K 6330-1:2003
Testing methods for rubber and plastics hoses -- Part 1: Methods of measurement of dimensions for hoses and hose assemblies (FOREIGN STANDARD)
JIS H 4635:2006
Titanium and titanium alloy welded pipes (FOREIGN STANDARD)
JIS H 4631:2006
Titanium and titanium alloy tubes for heat exchangers (FOREIGN STANDARD)
JIS H 4630:2007
Titanium and titanium alloys -- Seamless pipes (FOREIGN STANDARD)
JIS H 4202:2005
Magnesium alloy seamless pipes and tubes (FOREIGN STANDARD)
JIS H 3401:2001
Pipe fittings of copper and copper alloys (FOREIGN STANDARD)
JIS H 3330:2003
Plastic covered copper tubes (FOREIGN STANDARD)
JIS H 3300:2006
Copper and copper alloy seamless pipes and tubes (FOREIGN STANDARD)
JIS H 0517:2004
Differential pressure testing method of titanium welded tubes (FOREIGN STANDARD)
JIS H 0502:1986
Method of eddy current testing for copper and copper alloy pipes and tubes (FOREIGN STANDARD)
JIS G 5528:1984/AMENDMENT 1:2006
Epoxy-powder coating for interior of ductile iron pipes and fittings (Amendment 1) (FOREIGN STANDARD)
JIS G 5528:1984
Epoxy-powder coating for interior of ductile iron pipes and fittings (FOREIGN STANDARD)
JIS G 5527:1998
Ductile iron fittings (FOREIGN STANDARD)
JIS G 5526:1998
Ductile iron pipes (FOREIGN STANDARD)
JIS G 3471:1977
Corrugated steel pipes and sections (FOREIGN STANDARD)
JIS G 3469:2002
Polyethylene coated steel pipes (FOREIGN STANDARD)
JIS G 3468:2004
Large diameter welded stainless steel pipes (FOREIGN STANDARD)
JIS G 3461:2005
Carbon steel boiler and heat exchanger tubes (FOREIGN STANDARD)
JIS G 3459:2004
Stainless steel pipes (FOREIGN STANDARD)
JIS G 3458:2005
Alloy steel pipes (FOREIGN STANDARD)
JIS G 3457:2005
Arc welded carbon steel pipes (FOREIGN STANDARD)
JIS G 3456:2004
Carbon steel pipes for high temperature service (FOREIGN STANDARD)
JIS G 3455:2005
Carbon steel pipes for high pressure service (FOREIGN STANDARD)
JIS G 3454:2007
Carbon steel pipes for pressure service (FOREIGN STANDARD)
JIS G 3452:2004
Carbon steel pipes for ordinary piping (FOREIGN STANDARD)
JIS G 3448:2004
Light gauge stainless steel tubes for ordinary piping (FOREIGN STANDARD)
JIS G 3444:2006
Carbon steel tubes for general structural purposes (FOREIGN STANDARD)
JIS G 3443-4:2007
Coated steel pipes for water service -- Part 4: Internal epoxy coatings (FOREIGN STANDARD)
JIS G 3443-3:2007
Coated steel pipes for water service -- Part 3: External plastic coatings (FOREIGN STANDARD)
JIS G 3443-2:2007
Coated steel pipes for water service -- Part 2: Fittings (FOREIGN STANDARD)
JIS G 3443-1:2007
Coated steel pipes for water service -- Part 1: Pipes (FOREIGN STANDARD)
JIS G 3442:2004
Galvanized steel pipes for ordinary piping (FOREIGN STANDARD)
JIS G 3441:2004
Alloy steel tubes for machine purposes (FOREIGN STANDARD)
JIS G 0584:2004
Ultrasonic examination for arc welded steel pipes (FOREIGN STANDARD)
JIS G 0583:2004
Eddy current examination of steel pipes and tubes by encircling coil technique (FOREIGN STANDARD)
JIS G 0582:2004
Ultrasonic examination for steel pipes and tubes (FOREIGN STANDARD)
JIS E 6602:2004
Air conditioning units for rolling stock (FOREIGN STANDARD)
JIS D 2609:2002
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (FOREIGN STANDARD)
JIS C 9617:1992
Dehumidifiers (FOREIGN STANDARD)
JIS C 9603:1988/AMENDMENT 1:2006
Ventilating fans (Amendment 1) (FOREIGN STANDARD)
JIS C 9603:1988
Ventilating fans (FOREIGN STANDARD)
JIS C 9601:1990/AMENDMENT 1:2007
Electric fans (Amendment 1) (FOREIGN STANDARD)
JIS C 9601:1990
Electric fans (FOREIGN STANDARD)
JIS C 1031:1990
Methods of evaluating the performance of pressure and differential pressure transmitters for use in industrial-process control systems (FOREIGN STANDARD)
JIS B 9910:1994
Method of measuring performance for dust collectors (FOREIGN STANDARD)
JIS B 9901:1997
Gas-removal -- Method of test for performance of gas-removal filters (FOREIGN STANDARD)
JIS B 8607:2008
Flare type and brazing type fittings for refrigerants (FOREIGN STANDARD)
JIS B 8605:2002
Stop valves for refrigerants (FOREIGN STANDARD)
JIS B 8602:2002
Pipe flanges for refrigerants (FOREIGN STANDARD)
JIS B 8602:1999
Pipe flanges for refrigerants (FOREIGN STANDARD)
JIS B 8502:1986
Construction of welded aluminium and aluminium alloy storage tanks (FOREIGN STANDARD)
JIS B 8473:2007
Fuel oil pipe line -- Solenoid valves (FOREIGN STANDARD)
JIS B 8472:2008
Steam pipe line -- Solenoid valves (Foreign Standard)
JIS B 8471:2004
Water pipe line -- Solenoid valves (FOREIGN STANDARD)
JIS B 8414:2004
Relief valves for hot water appliances (FOREIGN STANDARD)
JIS B 8410:2004
Pressure reducing valves for water works (FOREIGN STANDARD)
JIS B 8401:1999
Automatic steam traps (FOREIGN STANDARD)
JIS B 8400-1:2003
Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm and 26 mm -- Part 1: Mounting interface surfaces without electrical connector (FOREIGN STANDARD)
JIS B 8376:1994
Speed control valves for pneumatic use (FOREIGN STANDARD)
JIS B 8374:1993
Pneumatic system -- 3-port solenoid operated valves (FOREIGN STANDARD)
JIS B 8373:1993
Pneumatic system -- 2-port solenoid operated valves (FOREIGN STANDARD)
JIS B 8372-2:2003
Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers (FOREIGN STANDARD)
JIS B 8372-1:2003
Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 1: Main characteristics to be included in literature from suppliers and product-making requirements (FOREIGN STANDARD)
JIS B 8365:1988
Dimensions of clamped-type vacuum couplings (FOREIGN STANDARD)
JIS B 8358:2004
Hydraulic fluid power -- Bladder type accumulators -- Test methods (FOREIGN STANDARD)
JIS B 8355:1997
Hydraulic fluid power -- Subplate type solenoid operated four-port valves (FOREIGN STANDARD)
JIS B 8342:2008
Small-size reciprocating air compressors (Foreign Standard)
JIS B 8331:2002
Forward-curved bladed fans (FOREIGN STANDARD)
JIS B 8330:2000
Testing methods for turbo-fans (FOREIGN STANDARD)
JIS B 8327:2002
Testing methods for performance of pump, using model pump (FOREIGN STANDARD)
JIS B 8301:2000
Rotodynamic pumps -- Hydraulic performance acceptance tests - Grades 1 and 2 (FOREIGN STANDARD)
JIS B 8286:2005
Sight glasses for pressure vessels (FOREIGN STANDARD)
JIS B 8285:2003
Welding procedure qualification test for pressure vessels (FOREIGN STANDARD)
JIS B 8284:2003
Quick closure for pressure vessels (FOREIGN STANDARD)
JIS B 8280:2003
Pressure vessels of noncircular cross section (FOREIGN STANDARD)
JIS B 8279:2003
Jacket for pressure vessels (FOREIGN STANDARD)
JIS B 8278:2003
Saddle supported horizontal pressure vessels (FOREIGN STANDARD)
JIS B 8266:2003/AMENDMENT 1:2006
Alternative standard for construction of pressure vessels (Amendment 1) (FOREIGN STANDARD)
JIS B 8266:2003
Alternative standard for construction of pressure vessels (FOREIGN STANDARD)
JIS B 8265:2003/AMENDMENT 2:2008
Construction of pressure vessel -- General principles (Amendment 2) (Foreign Standard)
JIS B 8265:2003/AMENDMENT 1:2006
Construction of pressure vessel -- General principles (Amendment 1) (FOREIGN STANDARD)
JIS B 8265:2003
Construction of pressure vessel -- General principles (FOREIGN STANDARD)
JIS B 8246:2004
Valves for high pressure gas cylinders (FOREIGN STANDARD)
JIS B 8245:2004
Valves for liquefied petroleum gas cylinder (FOREIGN STANDARD)
JIS B 8241:1989
Seamless steel gas cylinders (FOREIGN STANDARD)
JIS B 8240:1986
Construction of pressure vessels for refrigeration (FOREIGN STANDARD)
JIS B 8230:1989
Small type seamless steel gas cylinders (FOREIGN STANDARD)
JIS B 6164:1996
Compression type tube fittings for machine tools (FOREIGN STANDARD)
JIS B 2490:2008
Test method for sealing behavior of gaskets for pipe flanges (Foreign Standard)
JIS B 2410:2005
O-rings -- Suitability of elastomeric materials for industrial applications (FOREIGN STANDARD)
JIS B 2408:2005
O-rings -- Quality acceptance criteria (FOREIGN STANDARD)
JIS B 2407:1995
Back-up rings for O-rings (FOREIGN STANDARD)
JIS B 2406:1991
O-rings housings -- Design criteria (FOREIGN STANDARD)
JIS B 2404:2006
Dimensions of gaskets for use with pipe flanges (FOREIGN STANDARD)
JIS B 2403:2009
V packings (Foreign Standard)
JIS B 2401:2005
O-rings (FOREIGN STANDARD)
JIS B 2352:2005
Bellows type expansion joints (FOREIGN STANDARD)
JIS B 2321:1995/AMENDMENT 1:2009
Aluminium and aluminium alloy butt-welding pipe fittings (Amendment 1) (Foreign Standard)
JIS B 2321:1995
Aluminium and aluminium alloy butt-welding pipe fittings (FOREIGN STANDARD)
JIS B 2316:2007
Steel socket-welding pipe fittings (FOREIGN STANDARD)
JIS B 2313:2009
Steel plate butt-welding pipe fittings (Foreign Standard)
JIS B 2312:2009
Steel butt-welding pipe fittings (Foreign Standard)
JIS B 2311:2009
Steel butt-welding pipe fittings for ordinary use (Foreign Standard)
JIS B 2308:2002
Stainless steel threaded fittings (FOREIGN STANDARD)
JIS B 2303:1995
Screwed drainage fittings (FOREIGN STANDARD)
JIS B 2302:1998
Screwed type steel pipe fittings (FOREIGN STANDARD)
JIS B 2301:2004
Screwed type malleable cast iron pipe fittings (FOREIGN STANDARD)
JIS B 2292-2:2005
Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 2: Metric series (FOREIGN STANDARD)
JIS B 2292-1:2005
Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 1: Inch series shown in metric units (FOREIGN STANDARD)
JIS B 2291:1994
21 MPa slip-on welding pipe flanges for hydraulic use (FOREIGN STANDARD)
JIS B 2290:1998
Vacuum technology -- Flange dimensions (FOREIGN STANDARD)
JIS B 2251:2008
Bolt tighting procedure for pressure boundary flanged joint assembly (Foreign Standard)
JIS B 2241:2006
Aluminium alloy pipe flanges (FOREIGN STANDARD)
JIS B 2240:2006
Copper alloy pipe flanges (FOREIGN STANDARD)
JIS B 2239:2004
Cast iron pipe flanges (FOREIGN STANDARD)
JIS B 2220:2004
Steel pipe flanges (FOREIGN STANDARD)
JIS B 2207:1995/AMENDMENT 1:2006
Basis for calculation of aluminium alloy pipe flanges with full face gasket (Amendment 1) (FOREIGN STANDARD)
JIS B 2207:1995
Basis for calculation of aluminium alloy pipe flanges with full face gasket (FOREIGN STANDARD)
JIS B 2206:1995/AMENDMENT 1:2006
Basis for calculation of aluminium alloy pipe flanges (Amendment 1) (FOREIGN STANDARD)
JIS B 2206:1995
Basis for calculation of aluminium alloy pipe flanges (FOREIGN STANDARD)
JIS B 2205:1991/AMENDMENT 1:2006
Basis for calculation of pipe flanges (Amendment 1) (FOREIGN STANDARD)
JIS B 2205:1991
Basis for calculation of pipe flanges (FOREIGN STANDARD)
JIS B 2071:2000
Steel valves (FOREIGN STANDARD)
JIS B 2061:2006
Faucets, ball taps and flush valves (FOREIGN STANDARD)
JIS B 2051:1994
Malleable iron 10 K screwed valves (FOREIGN STANDARD)
JIS B 2032:1995
Wafer type rubber-seated butterfly valves (FOREIGN STANDARD)
JIS B 2031:1994
Gray cast iron valves (FOREIGN STANDARD)
JIS B 2011:2003/AMENDMENT 1:2004
Bronze gate, globe, angle, and check valves (Amendment 1) (FOREIGN STANDARD)
JIS B 2005-6-2:2005
Industrial-process control valves -- Part 6-2: Mounting details for attachment of positioners to control valves -- Positioner mounting on rotary actuators (FOREIGN STANDARD)
JIS B 2005-3-3:2005
Industrial-process control valves -- Part 3-3: Dimensions -- End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (FOREIGN STANDARD)
JIS B 2005-3-2:2005
Industrial-process control valves -- Part 3-2: Dimensions -- Face-to-face dimensions for rotary control valves except butterfly valves (FOREIGN STANDARD)
JIS B 2005-3-1:2005
Industrial-process control valves -- Part 3-1: Dimensions -- Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (FOREIGN STANDARD)
JIS B 2005-2-1:2005
Industrial-process control valves -- Part 2-1: Flow capacity -- Sizing equations for fluid flow under installed conditions (FOREIGN STANDARD)
JIS B 2004:1994
General rules for marking on valves (FOREIGN STANDARD)
JIS B 2003:1994
General rules for inspection of valves (FOREIGN STANDARD)
JIS B 2002:1987
Face-to-face and end-to-end dimensions of valves (FOREIGN STANDARD)
JIS B 2001:1987
Nominal size and bore of valves (FOREIGN STANDARD)
JIS A 5314:1998
Mortar lining for ductile iron pipes (FOREIGN STANDARD)
JIS A 4110:1989/AMENDMENT 1:2008
Glassfiber reinforced Plastic Water Tanks (Amendment 1) (FOREIGN STANDARD)
JIS A 4110:1989
Glassfiber reinforced plastic water tanks (FOREIGN STANDARD)

JIS Standards Catalogue