ISO ICS 87 Paint and colour industries

ICS Field
87.020 Paint coating processes
Surface preparation for painting, see 25.220.10
Standard and/or project TC
ISO 12944-1:1998
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 1: General introduction 90.93 TC 35/SC 14
ISO 12944-2:1998
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 2: Classification of environments 90.93 TC 35/SC 14
ISO 12944-3:1998
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 3: Design considerations 90.93 TC 35/SC 14
ISO 12944-5:2007
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective paint systems 60.60 TC 35/SC 14
ISO 12944-6:1998
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 6: Laboratory performance test methods 90.92 TC 35/SC 14
ISO 12944-7:1998
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 7: Execution and supervision of paint work 90.93 TC 35/SC 14
ISO 12944-8:1998
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 8: Development of specifications for new work and maintenance 90.93 TC 35/SC 14
ISO 15741:2001
Paints and varnishes -- Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases 90.93 TC 35/SC 14
ISO 16276-1:2007
Corrosion protection of steel structures by protective paint systems -- Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating -- Part 1: Pull-off testing 60.60 TC 35/SC 14
ISO 16276-2:2007
Corrosion protection of steel structures by protective paint systems -- Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating -- Part 2: Cross-cut testing and X-cut testing 60.60 TC 35/SC 14
ISO 19840:2004
Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces 90.93 TC 35/SC 14
ISO/CD 29601
Paints and varnishes -- Corrosion protection of steel by protective paint systems -- Assessment of, and acceptance criteria for, the porosity of a dry film 30.60 TC 35/SC 14

87.040 Paints and varnishes
Including coating powders, paint coatings and protective paint systems
Standard and/or project TC
ISO/DIS 1513
Paints and varnishes -- Preparation of test samples 40.60 TC 35/SC 9
ISO 1513:1992
Paints and varnishes -- Examination and preparation of samples for testing 90.92 TC 35/SC 9
ISO 1513:1992/Cor 1:1994
60.60 TC 35/SC 9
ISO 1514:2004
Paints and varnishes -- Standard panels for testing 90.93 TC 35/SC 9
ISO 1516:2002
Determination of flash/no flash -- Closed cup equilibrium method 90.93 TC 28
ISO 1517:1973
Paints and varnishes -- Surface-drying test -- Ballotini method 90.92 TC 35/SC 9
ISO 1518:1992
Paints and varnishes -- Scratch test 90.92 TC 35/SC 9
ISO/DIS 1518
Paints and varnishes -- Scratch test 40.20 TC 35/SC 9
ISO/CD 1519
Paints and varnishes -- Bend test (cylindrical mandrel) 30.99 TC 35/SC 9
ISO 1519:2002
Paints and varnishes -- Bend test (cylindrical mandrel) 90.92 TC 35/SC 9
ISO 1520:2006
Paints and varnishes -- Cupping test 90.93 TC 35/SC 9
ISO 1522:2006
Paints and varnishes -- Pendulum damping test 90.93 TC 35/SC 9
ISO 1523:2002
Determination of flash point -- Closed cup equilibrium method 90.93 TC 28
ISO 1524:2000
Paints, varnishes and printing inks -- Determination of fineness of grind 90.93 TC 35/SC 9
ISO 2409:2007
Paints and varnishes -- Cross-cut test 90.92 TC 35/SC 9
ISO/CD 2409
Paints and varnishes -- Cross-cut test 30.20 TC 35/SC 9
ISO/CD 2431
Paints and varnishes -- Determination of flow time by use of flow cups 30.20 TC 35/SC 9
ISO 2431:1993
Paints and varnishes -- Determination of flow time by use of flow cups 90.92 TC 35/SC 9
ISO 2431:1993/Cor 1:1994
60.60 TC 35/SC 9
ISO 2431:1993/Cor 2:1999
60.60 TC 35/SC 9
ISO 2808:2007
Paints and varnishes -- Determination of film thickness 60.60 TC 35/SC 9
ISO 2810:2004
Paints and varnishes -- Natural weathering of coatings -- Exposure and assessment 90.93 TC 35/SC 9
ISO 2811-1:1997
Paints and varnishes -- Determination of density -- Part 1: Pyknometer method 90.92 TC 35/SC 9
ISO/CD 2811-1
Paints and varnishes -- Determination of density -- Part 1: Pyknometer method 30.99 TC 35/SC 9
ISO/CD 2811-2
Paints and varnishes -- Determination of density -- Part 2: Immersed body (plummet) method 30.99 TC 35/SC 9
ISO 2811-2:1997
Paints and varnishes -- Determination of density -- Part 2: Immersed body (plummet) method 90.92 TC 35/SC 9
ISO 2811-3:1997
Paints and varnishes -- Determination of density -- Part 3: Oscillation method 90.92 TC 35/SC 9
ISO/CD 2811-3
Paints and varnishes -- Determination of density -- Part 3: Oscillation method 30.99 TC 35/SC 9
ISO/CD 2811-4
Paints and varnishes -- Determination of density -- Part 4: Pressure cup method 30.99 TC 35/SC 9
ISO 2811-4:1997
Paints and varnishes -- Determination of density -- Part 4: Pressure cup method 90.92 TC 35/SC 9
ISO 2812-1:2007
Paints and varnishes -- Determination of resistance to liquids -- Part 1: Immersion in liquids other than water 60.60 TC 35/SC 9
ISO 2812-2:2007
Paints and varnishes -- Determination of resistance to liquids -- Part 2: Water immersion method 60.60 TC 35/SC 9
ISO 2812-3:2007
Paints and varnishes -- Determination of resistance to liquids -- Part 3: Method using an absorbent medium 60.60 TC 35/SC 9
ISO 2812-4:2007
Paints and varnishes -- Determination of resistance to liquids -- Part 4: Spotting methods 60.60 TC 35/SC 9
ISO 2812-5:2007
Paints and varnishes -- Determination of resistance to liquids -- Part 5: Temperature-gradient oven method 60.60 TC 35/SC 9
ISO 2813:1994
Paints and varnishes -- Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees 90.60 TC 35/SC 9
ISO 2813:1994/Cor 1:1997
60.60 TC 35/SC 9
ISO 2814:1973
Paints and varnishes -- Comparison of contrast ratio (hiding power) of paints of the same type and colour 90.93 TC 35/SC 9
ISO 2815:2003
Paints and varnishes -- Buchholz indentation test 90.93 TC 35/SC 9
ISO 2884-1:1999
Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 1: Cone-and-plate viscometer operated at a high rate of shear 90.93 TC 35/SC 9
ISO 2884-2:2003
Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 2: Disc or ball viscometer operated at a specified speed 90.93 TC 35/SC 9
ISO 3231:1993
Paints and varnishes -- Determination of resistance to humid atmospheres containing sulfur dioxide 90.93 TC 35/SC 9
ISO 3233:1998
Paints and varnishes -- Determination of percentage volume of non-volatile matter by measuring the density of a dried coating 90.92 TC 35/SC 9
ISO/NP 3233
Paints and varnishes -- Determination of percentage volume of non-volatile matter by measuring the density of a dried coating 10.99 TC 35/SC 9
ISO 3233:1998/Cor 1:1999
60.60 TC 35/SC 9
ISO 3248:1998
Paints and varnishes -- Determination of the effect of heat 90.93 TC 35/SC 9
ISO 3251:2008
Paints, varnishes and plastics -- Determination of non-volatile-matter content 60.60 TC 35/SC 10
ISO 3270:1984
Paints and varnishes and their raw materials -- Temperatures and humidities for conditioning and testing 90.93 TC 35/SC 9
ISO 3668:1998
Paints and varnishes -- Visual comparison of the colour of paints 90.93 TC 35/SC 9
ISO 3678:1976
Paints and varnishes -- Print-free test 90.93 TC 35/SC 9
ISO 3679:2004
Determination of flash point -- Rapid equilibrium closed cup method 90.93 TC 28
ISO 3680:2004
Determination of flash/no flash -- Rapid equilibrium closed cup method 90.93 TC 28
ISO 3856-1:1984
Paints and varnishes -- Determination of "soluble" metal content -- Part 1: Determination of lead content -- Flame atomic absorption spectrometric method and dithizone spectrophotometric method 90.93 TC 35/SC 2
ISO 3856-2:1984
Paints and varnishes -- Determination of "soluble" metal content -- Part 2: Determination of antimony content -- Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method 90.93 TC 35/SC 2
ISO 3856-3:1984
Paints and varnishes -- Determination of "soluble" metal content -- Part 3: Determination of barium content -- Flame atomic emission spectrometric method 90.93 TC 35/SC 2
ISO 3856-4:1984
Paints and varnishes -- Determination of "soluble" metal content -- Part 4: Determination of cadmium content -- Flame atomic absorption spectrometric method and polarographic method 90.93 TC 35/SC 2
ISO 3856-5:1984
Paints and varnishes -- Determination of "soluble" metal content -- Part 5: Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form -- Diphenylcarbazide spectrophotometric method 90.93 TC 35/SC 2
ISO 3856-6:1984
Paints and varnishes -- Determination of "soluble" metal content -- Part 6: Determination of total chromium content of the liquid portion of the paint -- Flame atomic absorption spectrometric method 90.93 TC 35/SC 2
ISO 3856-7:1984
Paints and varnishes -- Determination of "soluble" metal content -- Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints -- Flameless atomic absorption spectrometric method 90.93 TC 35/SC 2
ISO 4618:2006
Paints and varnishes -- Terms and definitions 90.60 TC 35
ISO 4622:1992
Paints and varnishes -- Pressure test for stackability 90.92 TC 35/SC 9
ISO 4623-1:2000
Paints and varnishes -- Determination of resistance to filiform corrosion -- Part 1: Steel substrates 90.93 TC 35/SC 9
ISO 4623-2:2003
Paints and varnishes -- Determination of resistance to filiform corrosion -- Part 2: Aluminium substrates 90.93 TC 35/SC 9
ISO 4623-2:2003/Cor 1:2005
60.60 TC 35/SC 9
ISO 4624:2002
Paints and varnishes -- Pull-off test for adhesion 90.93 TC 35/SC 9
ISO 4628-1:2003
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 1: General introduction and designation system 90.93 TC 35/SC 9
ISO 4628-2:2003
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 2: Assessment of degree of blistering 90.93 TC 35/SC 9
ISO 4628-3:2003
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 3: Assessment of degree of rusting 90.93 TC 35/SC 9
ISO 4628-4:2003
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 4: Assessment of degree of cracking 90.93 TC 35/SC 9
ISO 4628-5:2003
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 5: Assessment of degree of flaking 90.93 TC 35/SC 9
ISO/CD 4628-6
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 6: Assessment of degree of chalking by tape method 30.20 TC 35/SC 9
ISO 4628-6:2007
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 6: Assessment of degree of chalking by tape method 90.92 TC 35/SC 9
ISO 4628-7:2003
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 7: Assessment of degree of chalking by velvet method 90.93 TC 35/SC 9
ISO/CD 4628-8
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 8: Assessment of degree of delamination and corrosion around a scribe 30.20 TC 35/SC 9
ISO 4628-8:2005
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 8: Assessment of degree of delamination and corrosion around a scribe 90.92 TC 35/SC 9
ISO 4628-10:2003
Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 10: Assessment of degree of filiform corrosion 90.93 TC 35/SC 9
ISO 6270-1:1998
Paints and varnishes -- Determination of resistance to humidity -- Part 1: Continuous condensation 90.93 TC 35/SC 9
ISO 6270-2:2005
Paints and varnishes -- Determination of resistance to humidity -- Part 2: Procedure for exposing test specimens in condensation-water atmospheres 90.93 TC 35/SC 9
ISO/CD 6272-1
Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 1: Falling-weight test, large-area indenter 30.20 TC 35/SC 9
ISO 6272-1:2002
Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 1: Falling-weight test, large-area indenter 90.92 TC 35/SC 9
ISO/CD 6272-2
Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 2: Falling-weight test, small-area indenter 30.20 TC 35/SC 9
ISO 6272-2:2002
Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 2: Falling-weight test, small-area indenter 90.92 TC 35/SC 9
ISO 6503:1984
Paints and varnishes -- Determination of total lead -- Flame atomic absorption spectrometric method 90.93 TC 35/SC 2
ISO 6504-1:1983
Paints and varnishes -- Determination of hiding power -- Part 1: Kubelka-Munk method for white and light-coloured paints 90.93 TC 35/SC 9
ISO 6504-3:2006
Paints and varnishes -- Determination of hiding power -- Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate 90.93 TC 35/SC 9
ISO 6713:1984
Paints and varnishes -- Preparation of acid extracts from paints in liquid or powder form 90.93 TC 35/SC 2
ISO 6860:2006
Paints and varnishes -- Bend test (conical mandrel) 90.93 TC 35/SC 9
ISO 7252:1984
Paints and varnishes -- Determination of total mercury -- Flameless atomic absorption spectrometric method 90.93 TC 35/SC 2
ISO 7724-1:1984
Paints and varnishes -- Colorimetry -- Part 1: Principles 90.93 TC 35/SC 9
ISO 7724-2:1984
Paints and varnishes -- Colorimetry -- Part 2: Colour measurement 90.93 TC 35/SC 9
ISO 7724-3:1984
Paints and varnishes -- Colorimetry -- Part 3: Calculation of colour differences 90.93 TC 35/SC 9
ISO/DIS 7783
Paints and varnishes -- Determination of water-vapour transmission properties -- Cup method 40.60 TC 35/SC 9
ISO 7783-1:1996
Paints and varnishes -- Determination of water-vapour transmission rate -- Part 1: Dish method for free films 90.92 TC 35/SC 9
ISO 7783-1:1996/Cor 1:1998
60.60 TC 35/SC 9
ISO 7783-2:1999
Paints and varnishes -- Coating materials and coating systems for exterior masonry and concrete -- Part 2: Determination and classification of water-vapour transmission rate (permeability) 90.92 TC 35/SC 9
ISO 7784-1:1997
Paints and varnishes -- Determination of resistance to abrasion -- Part 1: Rotating abrasive-paper-covered wheel method 90.93 TC 35/SC 9
ISO 7784-2:1997
Paints and varnishes -- Determination of resistance to abrasion -- Part 2: Rotating abrasive rubber wheel method 90.93 TC 35/SC 9
ISO 7784-3:2000
Paints and varnishes -- Determination of resistance to abrasion -- Part 3: Reciprocating test panel method 90.93 TC 35/SC 9
ISO 8130-1:1992
Coating powders -- Part 1: Determination of particle size distribution by sieving 90.93 TC 35/SC 9
ISO 8130-2:1992
Coating powders -- Part 2: Determination of density by gas comparison pyknometer (referee method) 90.93 TC 35/SC 9
ISO 8130-3:1992
Coating powders -- Part 3: Determination of density by liquid displacement pyknometer 90.93 TC 35/SC 9
ISO 8130-4:1992
Coating powders -- Part 4: Calculation of lower explosion limit 90.93 TC 35/SC 9
ISO 8130-4:1992/Cor 1:1993
60.60 TC 35/SC 9
ISO 8130-5:1992
Coating powders -- Part 5: Determination of flow properties of a powder/air mixture 90.93 TC 35/SC 9
ISO 8130-6:1992
Coating powders -- Part 6: Determination of gel time of thermosetting coating powders at a given temperature 90.93 TC 35/SC 9
ISO 8130-6:1992/Amd 1:1998
60.60 TC 35/SC 9
ISO 8130-7:1992
Coating powders -- Part 7: Determination of loss of mass on stoving 90.93 TC 35/SC 9
ISO 8130-8:1994
Coating powders -- Part 8: Assessment of the storage stability of thermosetting powders 90.60 TC 35/SC 9
ISO 8130-9:1992
Coating powders -- Part 9: Sampling 90.93 TC 35/SC 9
ISO 8130-10:1998
Coating powders -- Part 10: Determination of deposition efficiency 90.93 TC 35/SC 9
ISO 8130-11:1997
Coating powders -- Part 11: Inclined-plane flow test 90.93 TC 35/SC 9
ISO 8130-12:1998
Coating powders -- Part 12: Determination of compatibility 90.93 TC 35/SC 9
ISO 8130-13:2001
Coating powders -- Part 13: Particle size analysis by laser diffraction 90.93 TC 35/SC 9
ISO 8130-14:2004
Coating powders -- Part 14: Terminology 90.93 TC 35/SC 9
ISO 9038:2002
Test for sustained combustibility of liquids 90.92 TC 35/SC 9
ISO 9117-1:2009
Paints and varnishes -- Drying tests -- Part 1: Determination of through-dry state and through-dry time 60.60 TC 35/SC 9
ISO/DIS 9117-2
Paints and varnishes -- Drying tests -- Part 2: Pressure test for stackability 40.99 TC 35/SC 9
ISO/DIS 9117-3
Paints and varnishes -- Drying tests -- Part 3: Surface-drying test using ballotini 40.99 TC 35/SC 9
ISO 9514:2005
Paints and varnishes -- Determination of the pot life of multicomponent coating systems -- Preparation and conditioning of samples and guidelines for testing 90.60 TC 35/SC 9
ISO/DIS 10890
Paints and varnishes -- Modelling of biocide release rate from antifouling paints by mass-balance calculation 40.93 TC 35/SC 9
ISO 11341:2004
Paints and varnishes -- Artificial weathering and exposure to artificial radiation -- Exposure to filtered xenon-arc radiation 90.93 TC 35/SC 9
ISO 11503:1995
Paints and varnishes -- Determination of resistance to humidity (intermittent condensation) 90.93 TC 35/SC 9
ISO 11507:2007
Paints and varnishes -- Exposure of coatings to artificial weathering -- Exposure to fluorescent UV lamps and water 60.60 TC 35/SC 9
ISO 11890-1:2007
Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 1: Difference method 60.60 TC 35
ISO 11890-2:2006
Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 2: Gas-chromatographic method 90.60 TC 35
ISO 11997-1:2005
Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 1: Wet (salt fog)/dry/humidity 90.93 TC 35/SC 9
ISO 11997-2:2000
Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 2: Wet (salt fog)/dry/humidity/UV light 90.93 TC 35/SC 9
ISO 11998:2006
Paints and varnishes -- Determination of wet-scrub resistance and cleanability of coatings 90.60 TC 35/SC 9
ISO/AWI 12013-1
Paints and varnishes -- Determination of crosslinking using the pendulum-damping test -- Part 1: Start of crosslinking 20.00 TC 35/SC 9
ISO/AWI 12013-2
Paints and varnishes -- Determination of crosslinking using the pendulum-damping test -- Part 2: Glass-transition temperature 20.00 TC 35/SC 9
ISO 12137-1:1997
Paints and varnishes -- Determination of mar resistance -- Part 1: Method using a curved stylus 90.92 TC 35/SC 9
ISO/DIS 12137-1
Paints and varnishes -- Determination of scratch resistance -- Part 1: Method using a curved stylus 40.20 TC 35/SC 9
ISO 12137-1:1997/Cor 1:1998
60.60 TC 35/SC 9
ISO 12137-2:1997
Paints and varnishes -- Determination of mar resistance -- Part 2: Method using a pointed stylus 90.92 TC 35/SC 9
ISO/DIS 12137-2
Paints and varnishes -- Determination of scratch resistance -- Part 2: Method using a pointed stylus 40.20 TC 35/SC 9
ISO/WD 13129
Paints and varnishes -- Electrochemical measurement of the protection provided to steel by paint coatings -- Current interrupter technique 20.20 TC 35/SC 9
ISO 13803:2000
Paints and varnishes -- Determination of reflection haze on paint films at 20 degrees 90.93 TC 35/SC 9
ISO 15181-1:2007
Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 1: General method for extraction of biocides 60.60 TC 35/SC 9
ISO 15181-2:2007
Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate 60.60 TC 35/SC 9
ISO 15181-3:2007
Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract 60.60 TC 35/SC 9
ISO 15181-4:2008
Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate 60.60 TC 35/SC 9
ISO 15181-5:2008
Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract 60.60 TC 35/SC 9
ISO/CD 15181-6
Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 6: Determination of tralopyril release rate by quantification of its degradation product in the extract 30.99 TC 35/SC 9
ISO 15184:1998
Paints and varnishes -- Determination of film hardness by pencil test 90.60 TC 35/SC 9
ISO 15234:1999
Paints and varnishes -- Testing of formaldehyde-emitting coatings and melamine foams -- Determination of the steady-state concentration of formaldehyde in a small test chamber 90.93 TC 35/SC 10
ISO 15528:2000
Paints, varnishes and raw materials for paints and varnishes -- Sampling 90.93 TC 35/SC 9
ISO 15710:2002
Paints and varnishes -- Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution 90.93 TC 35/SC 9
ISO 15711:2003
Paints and varnishes -- Determination of resistance to cathodic disbonding of coatings exposed to sea water 90.93 TC 35/SC 9
ISO/DIS 16053
Paints and varnishes -- Coating materials and coating systems for exterior wood -- Natural weathering test 40.60 TC 35/SC 9
ISO 16053:2004
Paints and varnishes -- Coating materials and coating systems for exterior wood -- Natural weathering test 90.92 TC 35/SC 9
ISO 16773-1:2007
Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 1: Terms and definitions 60.60 TC 35/SC 9
ISO 16773-2:2007
Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 2: Collection of data 60.60 TC 35/SC 9
ISO 16773-3:2009
Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 3: Processing and analysis of data from dummy cells 60.60 TC 35/SC 9
ISO 16773-4:2009
Paints and varnishes -- Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens -- Part 4: Examples of spectra of polymer-coated specimens 60.60 TC 35/SC 9
ISO 16805:2003
Binders for paints and varnishes -- Determination of glass transition temperature 90.93 TC 35/SC 10
ISO 16862:2003
Paints and varnishes -- Evaluation of sag resistance 90.93 TC 35/SC 9
ISO 17132:2007
Paints and varnishes -- T-bend test 60.60 TC 35/SC 9
ISO 17872:2007
Paints and varnishes -- Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing 60.60 TC 35/SC 9
ISO 17895:2005
Paints and varnishes -- Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) 90.60 TC 35
ISO 19334:2006
Binders for paints and varnishes -- Gum rosin -- Gas-chromatographic analysis 90.92 TC 35/SC 10
ISO/DIS 19334
Binders for paints and varnishes -- Gum rosin -- Gas-chromatographic analysis 40.20 TC 35/SC 10
ISO 20340:2009
Paints and varnishes -- Performance requirements for protective paint systems for offshore and related structures 60.60 TC 35/SC 14
ISO 20566:2005
Paints and varnishes -- Determination of the scratch resistance of a coating system using a laboratory car-wash 90.92 TC 35/SC 9
ISO/NP 20566
Paints and varnishes -- Determination of the scratch resistance of a coating system using a laboratory car-wash 10.99 TC 35/SC 9
ISO 20567-1:2005
Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 1: Multi-impact testing 90.93 TC 35/SC 9
ISO 20567-2:2005
Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 2: Single-impact test with a guided impact body 90.93 TC 35/SC 9
ISO 21227-1:2003
Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 1: General guidance 90.93 TC 35/SC 9
ISO 21227-2:2006
Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 2: Evaluation procedure for multi-impact stone-chipping test 90.93 TC 35/SC 9
ISO 21227-3:2007
Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 3: Evaluation of delamination and corrosion around a scribe 60.60 TC 35/SC 9
ISO 21227-4:2008
Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 4: Evaluation of filiform corrosion 60.60 TC 35/SC 9
ISO 23811:2009
Paints and varnishes -- Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate 60.60 TC 35/SC 9
ISO/TR 24430:2003
Paints and varnishes -- Guidelines for the determination of the precision of a test method by interlaboratory trials 90.60 TC 35
ISO 28199-1
Paints and varnishes -- Evaluation of properties of coating systems related to the application process -- Part 1: Relevant vocabulary and preparation of test panels 60.00 TC 35/SC 9
ISO 28199-2
Paints and varnishes -- Evaluation of properties of coating systems related to the application process -- Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling 60.00 TC 35/SC 9
ISO 28199-3
Paints and varnishes -- Evaluation of properties of coating systems related to the application process -- Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power 60.00 TC 35/SC 9

87.060 Paint ingredients
87.060.01 Paint ingredients in general
ISO 3270:1984
Paints and varnishes and their raw materials -- Temperatures and humidities for conditioning and testing 90.93 TC 35/SC 9
87.060.10 Pigments and extenders
Standard and/or project TC
ISO 473:1982
Lithopone pigments for paints -- Specifications and methods of test 90.60 TC 35/SC 2
ISO 510:1977
Red lead for paints 90.93 TC 35/SC 2
ISO 591-1:2000
Titanium dioxide pigments for paints -- Part 1: Specifications and methods of test 90.93 TC 35/SC 2
ISO 787-1:1982
General methods of test for pigments and extenders -- Part 1: Comparison of colour of pigments 90.60 TC 35/SC 2
ISO 787-2:1981
General methods of test for pigments and extenders -- Part 2: Determination of matter volatile at 105 degrees C 90.60 TC 35/SC 2
ISO 787-3:2000
General methods of test for pigments and extenders -- Part 3: Determination of matter soluble in water -- Hot extraction method 90.93 TC 35/SC 2
ISO 787-4:1981
General methods of test for pigments and extenders -- Part 4: Determination of acidity or alkalinity of the aqueous extract 90.60 TC 35/SC 2
ISO 787-5:1980
General methods of test for pigments and extenders -- Part 5: Determination of oil absorption value 90.93 TC 35/SC 2
ISO 787-7:1981
General methods of test for pigments and extenders -- Part 7: Determination of residue on sieve -- Water method -- Manual procedure 90.93 TC 35/SC 2
ISO/FDIS 787-7
General methods of test for pigments and extenders -- Part 7: Determination of residue on sieve -- Water method -- Manual procedure 50.20 TC 35/SC 2
ISO 787-8:2000
General methods of test for pigments and extenders -- Part 8: Determination of matter soluble in water -- Cold extraction method 90.93 TC 35/SC 2
ISO 787-9:1981
General methods of test for pigments and extenders -- Part 9: Determination of pH value of an aqueous suspension 90.60 TC 35/SC 2
ISO 787-10:1993
General methods of test for pigments and extenders -- Part 10: Determination of density -- Pyknometer method 90.60 TC 35/SC 2
ISO 787-11:1981
General methods of test for pigments and extenders -- Part 11: Determination of tamped volume and apparent density after tamping 90.60 TC 35/SC 2
ISO 787-13:2002
General methods of test for pigments and extenders -- Part 13: Determination of water-soluble sulfates, chlorides and nitrates 90.93 TC 35/SC 2
ISO 787-14:2002
General methods of test for pigments and extenders -- Part 14: Determination of resistivity of aqueous extract 90.93 TC 35/SC 2
ISO 787-15:1986
General methods of test for pigments and extenders -- Part 15: Comparison of resistance to light of coloured pigments of similar types 90.93 TC 35/SC 2
ISO 787-16:1986
General methods of test for pigments and extenders -- Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments -- Visual comparison method 90.93 TC 35/SC 2
ISO 787-17:2002
General methods of test for pigments and extenders -- Part 17: Comparison of lightening power of white pigments 90.93 TC 35/SC 2
ISO 787-18:1983
General methods of test for pigments and extenders -- Part 18: Determination of residue on sieve -- Mechanical flushing procedure 90.60 TC 35/SC 2
ISO 787-19:1974
General methods of test for pigments -- Part 19: Determination of water-soluble nitrates (Salicylic acid method) 90.60 TC 35/SC 2
ISO 787-21:1979
General methods of test for pigments and extenders -- Part 21: Comparison of heat stability of pigments using a stoving medium 90.93 TC 35/SC 2
ISO 787-22:1980
General methods of test for pigments and extenders -- Part 22: Comparison of resistance to bleeding of pigments 90.93 TC 35/SC 2
ISO 787-23:1979
General methods of test for pigments and extenders -- Part 23: Determination of density (using a centrifuge to remove entrained air) 90.93 TC 35/SC 2
ISO 787-24:1985
General methods of test for pigments and extenders -- Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments -- Photometric methods 90.93 TC 35/SC 2
ISO 787-25:1993
General methods of test for pigments and extenders -- Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments -- Colorimetric method 90.60 TC 35/SC 2
ISO 788:1974
Ultramarine pigments for paints 90.93 TC 35/SC 2
ISO 1247:1974
Aluminium pigments for paints 90.93 TC 35/SC 2
ISO 1247:1974/Amd 1:1982
60.60 TC 35/SC 2
ISO 1248:2006
Iron oxide pigments -- Specifications and methods of test 90.60 TC 35/SC 2
ISO 1248:2006/Cor 1:2007
60.60 TC 35/SC 2
ISO 1248:2006/Cor 2:2008
60.60 TC 35/SC 2
ISO 1249:1974
Zinc chromate pigments -- Basic zinc potassium chromate pigments and zinc tetrahydroxychromate pigments 90.60 TC 35/SC 2
ISO 1249:1974/Cor 1:1992
60.60 TC 35/SC 2
ISO 2040:1972
Strontium chromate pigments for paints 90.93 TC 35/SC 2
ISO 2068:1972
Barium chromate pigments for paints 90.93 TC 35/SC 2
ISO 2495:1995
Iron blue pigments -- Specifications and methods of test 90.93 TC 35/SC 2
ISO 3262-1:1997
Extenders for paints -- Specifications and methods of test -- Part 1: Introduction and general test methods 90.60 TC 35/SC 2
ISO 3262-2:1998
Extenders for paints -- Specifications and methods of test -- Part 2: Barytes (natural barium sulfate) 90.60 TC 35/SC 2
ISO 3262-3:1998
Extenders for paints -- Specifications and methods of test -- Part 3: Blanc fixe 90.60 TC 35/SC 2
ISO 3262-4:1998
Extenders for paints -- Specifications and methods of test -- Part 4: Whiting 90.60 TC 35/SC 2
ISO 3262-5:1998
Extenders for paints -- Specifications and methods of test -- Part 5: Natural crystalline calcium carbonate 90.60 TC 35/SC 2
ISO 3262-6:1998
Extenders for paints -- Specifications and methods of test -- Part 6: Precipitated calcium carbonate 90.60 TC 35/SC 2
ISO 3262-7:1998
Extenders for paints -- Specifications and methods of test -- Part 7: Dolomite 90.60 TC 35/SC 2
ISO 3262-8:1999
Extenders for paints -- Specifications and methods of test -- Part 8: Natural clay 90.60 TC 35/SC 2
ISO 3262-9:1997
Extenders for paints -- Specifications and methods of test -- Part 9: Calcined clay 90.60 TC 35/SC 2
ISO 3262-10:2000
Extenders for paints -- Specifications and methods of test -- Part 10: Natural talc/chlorite in lamellar form 90.93 TC 35/SC 2
ISO 3262-11:2000
Extenders for paints -- Specifications and methods of test -- Part 11: Natural talc, in lamellar form, containing carbonates 90.93 TC 35/SC 2
ISO 3262-12:2001
Extenders for paints -- Specifications and methods of test -- Part 12: Muscovite-type mica 90.93 TC 35/SC 2
ISO 3262-13:1997
Extenders for paints -- Specifications and methods of test -- Part 13: Natural quartz (ground) 90.60 TC 35/SC 2
ISO 3262-14:2000
Extenders for paints -- Specifications and methods of test -- Part 14: Cristobalite 90.93 TC 35/SC 2
ISO 3262-15:2000
Extenders for paints -- Specifications and methods of test -- Part 15: Vitreous silica 90.93 TC 35/SC 2
ISO 3262-16:2000
Extenders for paints -- Specifications and methods of test -- Part 16: Aluminium hydroxides 90.93 TC 35/SC 2
ISO 3262-17:2000
Extenders for paints -- Specifications and methods of test -- Part 17: Precipitated calcium silicate 90.93 TC 35/SC 2
ISO 3262-18:2000
Extenders for paints -- Specifications and methods of test -- Part 18: Precipitated sodium aluminium silicate 90.93 TC 35/SC 2
ISO 3262-19:2000
Extenders for paints -- Specifications and methods of test -- Part 19: Precipitated silica 90.93 TC 35/SC 2
ISO 3262-20:2000
Extenders for paints -- Specifications and methods of test -- Part 20: Fumed silica 90.93 TC 35/SC 2
ISO 3262-21:2000
Extenders for paints -- Specifications and methods of test -- Part 21: Silica sand (unground natural quartz) 90.93 TC 35/SC 2
ISO 3262-22:2001
Extenders for paints -- Specifications and methods of test -- Part 22: Flux-calcined kieselguhr 90.93 TC 35/SC 2
ISO 3549:1995
Zinc dust pigments for paints -- Specifications and test methods 90.93 TC 35/SC 2
ISO 3711:1990
Lead chromate pigments and lead chromate-molybdate pigments -- Specifications and methods of test 90.93 TC 35/SC 2
ISO 4620:1986
Cadmium pigments -- Specifications and methods of test 90.93 TC 35/SC 2
ISO 4621:1986
Chrome oxide green pigments -- Specifications and methods of test 90.93 TC 35/SC 2
ISO 6745:1990
Zinc phosphate pigments for paints -- Specifications and methods of test 90.93 TC 35/SC 2
ISO/FDIS 7579
Dyestuffs -- Determination of solubility in organic solvents -- Gravimetric and photometric methods 50.20 TC 35/SC 2
ISO 7579:1990
Dyestuffs -- Determination of solubility in organic solvents -- Gravimetric method 90.92 TC 35/SC 2
ISO 8780-1:1990
Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 1: Introduction 90.93 TC 35/SC 2
ISO 8780-2:1990
Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 2: Dispersion using an oscillatory shaking machine 90.93 TC 35/SC 2
ISO 8780-3:1990
Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 3: Dispersion using a high-speed impeller mill 90.93 TC 35/SC 2
ISO 8780-4:1990
Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 4: Dispersion using a bead mill 90.93 TC 35/SC 2
ISO 8780-5:1990
Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 5: Dispersion using an automatic muller 90.93 TC 35/SC 2
ISO 8780-6:1990
Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 6: Dispersion using a triple-roll mill 90.93 TC 35/SC 2
ISO 8781-1:1990
Pigments and extenders -- Methods of assessment of dispersion characteristics -- Part 1: Assessment from the change in tinting strength of coloured pigments 90.93 TC 35/SC 2
ISO 8781-2:1990
Pigments and extenders -- Methods of assessment of dispersion characteristics -- Part 2: Assessment from the change in fineness of grind 90.93 TC 35/SC 2
ISO 8781-3:1990
Pigments and extenders -- Methods of assessment of dispersion characteristics -- Part 3: Assessment from the change in gloss 90.93 TC 35/SC 2
ISO 10601:2007
Micaceous iron oxide pigments for paints -- Specifications and test methods 60.60 TC 35/SC 2
ISO 14680-1:2000
Paints and varnishes -- Determination of pigment content -- Part 1: Centrifuge method 90.93 TC 35/SC 9
ISO 14680-2:2000
Paints and varnishes -- Determination of pigment content -- Part 2: Ashing method 90.93 TC 35/SC 9
ISO 14680-3:2000
Paints and varnishes -- Determination of pigment content -- Part 3: Filtration method 90.93 TC 35/SC 9

87.060.20 Binders
Standard and/or project TC
ISO 150:2006
Raw, refined and boiled linseed oil for paints and varnishes -- Specifications and methods of test 90.93 TC 35/SC 10
ISO 276:2002
Binders for paints and varnishes -- Linseed stand oil -- Requirements and methods of test 90.93 TC 35/SC 10
ISO 277:2002
Binders for paints and varnishes -- Raw tung oil -- Requirements and methods of test 90.93 TC 35/SC 10
ISO 2114:2000
Plastics (polyester resins) and paints and varnishes (binders) -- Determination of partial acid value and total acid value 90.93 TC 61/SC 12
ISO 3251:2008
Paints, varnishes and plastics -- Determination of non-volatile-matter content 60.60 TC 35/SC 10
ISO 3681:1996
Binders for paints and varnishes -- Determination of saponification value -- Titrimetric method 90.93 TC 35/SC 10
ISO 4625-1:2004
Binders for paints and varnishes -- Determination of softening point -- Part 1: Ring-and-ball method 90.93 TC 35/SC 10
ISO 4625-2:2004
Binders for paints and varnishes -- Determination of softening point -- Part 2: Cup-and-ball method 90.93 TC 35/SC 10
ISO 4629:1996
Binders for paints and varnishes -- Determination of hydroxyl value -- Titrimetric method 90.60 TC 35/SC 10
ISO 4630-1:2004
Clear liquids -- Estimation of colour by the Gardner colour scale -- Part 1: Visual method 90.93 TC 35/SC 10
ISO 4630-2:2004
Clear liquids -- Estimation of colour by the Gardner colour scale -- Part 2: Spectrophotometric method 90.93 TC 35/SC 10
ISO 6271-1:2004
Clear liquids -- Estimation of colour by the platinum-cobalt scale -- Part 1: Visual method 90.93 TC 35/SC 10
ISO 6271-2:2004
Clear liquids -- Estimation of colour by the platinum-cobalt scale -- Part 2: Spectrophotometric method 90.93 TC 35/SC 10
ISO 6744-1:1999
Binders for paints and varnishes -- Alkyd resins -- Part 1: General methods of test 90.93 TC 35/SC 10
ISO 6744-2:1999
Binders for paints and varnishes -- Alkyd resins -- Part 2: Determination of phthalic anhydride content 90.93 TC 35/SC 10
ISO 6744-3:1999
Binders for paints and varnishes -- Alkyd resins -- Part 3: Determination of unsaponifiable matter content 90.93 TC 35/SC 10
ISO 6744-4:1999
Binders for paints and varnishes -- Alkyd resins -- Part 4: Determination of fatty acid content 90.93 TC 35/SC 10
ISO 7142:2007
Binders for paints and varnishes -- Epoxy resins -- General methods of test 60.60 TC 35/SC 10
ISO 7143:2007
Binders for paints and varnishes -- Methods of test for characterizing water-based binders 60.60 TC 35/SC 10
ISO 10283:2007
Binders for paints and varnishes -- Determination of monomeric diisocyanates in isocyanate resins 60.60 TC 35/SC 10
ISO 11668:1997
Binders for paints and varnishes -- Chlorinated polymerization resins -- General methods of test 90.93 TC 35/SC 10
ISO 11908:1996
Binders for paints and varnishes -- Amino resins -- General methods of test 90.93 TC 35/SC 10
ISO 11909:2007
Binders for paints and varnishes -- Polyisocyanate resins -- General methods of test 60.60 TC 35/SC 10
ISO 13885-1:2008
Binders for paints and varnishes -- Gel permeation chromatography (GPC) -- Part 1: Tetrahydrofuran (THF) as eluent 60.60 TC 35/SC 10
ISO 14446:1999
Binders for paints and varnishes -- Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions 90.93 TC 35/SC 10
ISO 15715:2003
Binders for paints and varnishes -- Determination of turbidity 90.93 TC 35/SC 10
ISO 15880:2000
Paints, varnishes and binders -- Determination of MEQ value of water-based coating materials and binders 90.93 TC 35/SC 10
ISO 16805:2003
Binders for paints and varnishes -- Determination of glass transition temperature 90.93 TC 35/SC 10
ISO/DIS 19334
Binders for paints and varnishes -- Gum rosin -- Gas-chromatographic analysis 40.20 TC 35/SC 10
ISO 19334:2006
Binders for paints and varnishes -- Gum rosin -- Gas-chromatographic analysis 90.92 TC 35/SC 10

87.060.30 Solvents
ISO 4626:1980
Volatile organic liquids -- Determination of boiling range of organic solvents used as raw materials 90.93 TC 35
87.060.99 Other paint ingredients
ISO 4619:1998
Driers for paints and varnishes 90.60 TC 35
ISO 8623:1997
Tall-oil fatty acids for paints and varnishes -- Specifications and test methods 90.93 TC 35

87.080 Inks. Printing inks
Materials for graphic technology, see 37.100.20
Standard and/or project TC
ISO 2834-1:2006
Graphic technology -- Laboratory preparation of test prints -- Part 1: Paste inks 90.60 TC 130
ISO 2834-2:2007
Graphic technology -- Laboratory preparation test prints -- Part 2: Liquid printing inks 60.60 TC 130
ISO 2834-3:2008
Graphic technology -- Laboratory preparation of test prints -- Part 3: Screen printing inks 60.60 TC 130
ISO 2836:2004
Graphic technology -- Prints and printing inks -- Assessment of resistance of prints to various agents 90.93 TC 130
ISO 2846-1:2006
Graphic technology -- Colour and transparency of printing ink sets for four-colour printing -- Part 1: Sheet-fed and heat-set web offset lithographic printing 90.60 TC 130
ISO 2846-2:2007
Graphic technology -- Colour and transparency of printing ink sets for four-colour printing -- Part 2: Coldset offset lithographic printing 60.60 TC 130
ISO 2846-3:2002
Graphic technology -- Colour and transparency of printing ink sets for four-colour-printing -- Part 3: Publication gravure printing 90.93 TC 130
ISO 2846-4:2000
Graphic technology -- Colour and transparency of printing ink sets for four-colour-printing -- Part 4: Screen printing 90.93 TC 130
ISO 2846-5:2005
Graphic technology -- Colour and transparency of printing ink sets for four-colour printing -- Part 5: Flexographic printing 90.93 TC 130
ISO 12040:1997
Graphic technology -- Prints and printing inks -- Assessment of light fastness using filtered xenon arc light 90.93 TC 130
ISO 12634:1996
Graphic technology -- Determination of tack of paste inks and vehicles by a rotary tackmeter 90.93 TC 130
ISO 12644:1996
Graphic technology -- Determination of rheological properties of paste inks and vehicles by the falling rod viscometer 90.93 TC 130

87.100 Paint coating equipment
Standard and/or project TC
ISO 8028:1999
Rubber and/or plastics hoses and hose assemblies for airless paint spraying -- Specification 90.60 TC 45/SC 1