DIN Standards : DIN ICS 91 Construction Materials and Building
DIN V 18599-6:2007
Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 6: Final energy demand of ventilation systems and air h (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN V 18599-4:2007
Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 4: Net and final energy demand for lighting (FOREIGN STANDARD)
DIN V 18599-2:2007
Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 2: Net energy demand for heating and cooling of building zones (FOREIGN STANDARD)
DIN V 18599-10:2007
Energy efficiency of buildings - Calculation of the net, final and primary energy demand for heating, cooling, ventilation, domestic hot water and lighting - Part 10: Boundary conditions of use, climatic data (FOREIGN STANDARD)
DIN SPEC 1096*DIN-Fachbericht CEN/TR 15855:2009
Construction products - Assessment of release of dangerous substances - Barriers to trade; English version CEN/TR 15855:2009 (Foreign Standard)
DIN EN 998-2:2003
Specification for mortar for masonry - Part 2: Masonry mortar (FOREIGN STANDARD)
DIN EN 998-1:2003
Specification for mortar for masonry - Part 1: Rendering and plastering mortar (FOREIGN STANDARD)
DIN EN 997:2008
WC pans and WC suites with integral trap; German version EN 997:2003+A1:2006 (FOREIGN STANDARD)
DIN EN 996:1996
Piling equipment - Safety requirements (FOREIGN STANDARD)
DIN EN 992:1995
Determination of the dry density of lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 991:1995
Determination of the dimensions of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 990:2003
Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 989:1995
Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the 'push-out' test (FOREIGN STANDARD)
DIN EN 952:1999
Door leaves - General and local flatness - Measurement method (FOREIGN STANDARD)
DIN EN 951:1999
Door leaves - Method for measurement of height, width, thickness and squareness (FOREIGN STANDARD)
DIN EN 950:1999
Door leaves - Determination of the resistance to hard body impact (FOREIGN STANDARD)
DIN EN 949:1999
Windows and curtain walling, doors, blinds and shutters - Determination of the resistance to soft and heavy body impact for doors (FOREIGN STANDARD)
DIN EN 948:1999
Hinged or pivoted doors - Determination of the resistance to static torsion (FOREIGN STANDARD)
DIN EN 947:1999
Hinged or pivoted doors - Determination of the resistance to vertical load (FOREIGN STANDARD)
DIN EN 934-6:2006
Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity (FOREIGN STANDARD)
DIN EN 934-5:2008
Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling; German version EN 934-5:2007 (FOREIGN STANDARD)
DIN EN 934-4:2002
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons; Definitions, requirements, conformity, marking and labelling; English version of DIN EN 934-4 (FOREIGN STANDARD)
DIN EN 934-4/A1:2005
Admixtures for concrete, mortar and grout - Admixtures for grout for prestressing tendons - Part 4: Definitions, requirements, conformity, marking and labelling (FOREIGN STANDARD)
DIN EN 933-9:1998
Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test (FOREIGN STANDARD)
DIN EN 933-8:1999
Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test (FOREIGN STANDARD)
DIN EN 933-7:1998
Tests for geometrical properties of aggregates - Part 7: Determination of shell content; percentage of shells in coarse aggregates (FOREIGN STANDARD)
DIN EN 933-6:2002
Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics; Flow coefficient of aggregates; English version of DIN EN 933-6 (FOREIGN STANDARD)
DIN EN 933-4:2008
Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index; German version EN 933-4:2008 (FOREIGN STANDARD)
DIN EN 933-2:1996
Tests for geometrical properties of aggregates - Determination of particle size distribution: Test sieves and nominal aperture size (FOREIGN STANDARD)
DIN EN 933-11:2009
Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate; German version EN 933-11:2009 (Foreign Standard)
DIN EN 933-10:2001
Test for geometrical properties of aggregates - Part 10: Assessment of fines; Grading of fillers (air jet sieving); English version of DIN EN 933-10 (FOREIGN STANDARD)
DIN EN 933-1:2006
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method (FOREIGN STANDARD)
DIN EN 932-5:2000
Tests for general properties of aggregates - Part 5: Common equipment and calibration (FOREIGN STANDARD)
DIN EN 932-2:1999
Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples (FOREIGN STANDARD)
DIN EN 932-1:1996
Tests for general properties of aggregates - Part 1: Methods for sampling (FOREIGN STANDARD)
DIN EN 846-9:2000
Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels; English version of DIN EN 846-9 (FOREIGN STANDARD)
DIN EN 846-8:2006
Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers; German version EN 846-8:2000 + A1:2006 (FOREIGN STANDARD)
DIN EN 846-7:2000
Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections); English (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 846-6:2000
Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test); English version of DIN EN 846-6 (FOREIGN STANDARD)
DIN EN 846-5:2000
Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couple test); English version of DIN EN 846-5 (FOREIGN STANDARD)
DIN EN 846-4:2005
Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps (FOREIGN STANDARD)
DIN EN 846-3:2000
Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement; English version of DIN EN 846-3 (FOREIGN STANDARD)
DIN EN 846-2:2000
Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints; English version of DIN EN 846-2 (FOREIGN STANDARD)
DIN EN 846-13:2001
Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings; English version of DIN EN 846-13 (FOREIGN STANDARD)
DIN EN 846-11:2000
Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels; English version of DIN EN 846-11 (FOREIGN STANDARD)
DIN EN 846-10:2000
Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets; English version of DIN EN 846-10 (FOREIGN STANDARD)
DIN EN 845-3:2008
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork; German version EN 845-3:2003+A1:2008 (FOREIGN STANDARD)
DIN EN 845-2:2003
Specification for ancillary components for masonry - Part 2: Lintels (FOREIGN STANDARD)
DIN EN 845-1:2008
Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets; German version EN 845-1:2003+A1:2008 (FOREIGN STANDARD)
DIN EN 835:1995
Heat cost allocators for the determination of the consumption of room heating radiators - Appliances without an electrical energy supply, based on the evaporation principle (FOREIGN STANDARD)
DIN EN 834:1994
Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply (FOREIGN STANDARD)
DIN EN 826:1996
Thermal insulating products for building applications - Determination of compression behaviour (FOREIGN STANDARD)
DIN EN 825:1994
Thermal insulating products for building applications - Determination of flatness (FOREIGN STANDARD)
DIN EN 824:1994
Thermal insulating products for building applications - Determination of squareness (FOREIGN STANDARD)
DIN EN 823:1994
Thermal insulating products for building applications - Determination of thickness (FOREIGN STANDARD)
DIN EN 822:1994
Thermal insulating products for building applications - Determination of length and width (FOREIGN STANDARD)
DIN EN 81-80:2004
Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts (FOREIGN STANDARD)
DIN EN 81-72:2003
Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 72: Firefighters lifts (FOREIGN STANDARD)
DIN EN 81-71:2007
Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts; German version EN 81-71+A1:2006 (FOREIGN STANDARD)
DIN EN 81-70:2005
Safety rules for the construction and installations of lifts - Particular applications for passenger and goods passengers lifts - Part 70: Accessibility to lifts for persons including persons with disability (FOREIGN STANDARD)
DIN EN 817:2008
Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications; German version EN 817:2008 (Foreign Standard)
DIN EN 815:1996
Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock (FOREIGN STANDARD)
DIN EN 81-3:2001
Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts; English version of DIN EN 81-3 (FOREIGN STANDARD)
DIN EN 81-2:2000
Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts (includes corrigendum AC:1999); English version of DIN EN 81-2:1998 + AC:1999 (FOREIGN STANDARD)
DIN EN 81-2/A2:2005
Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts - A2: Machinery and pulley spaces (FOREIGN STANDARD)
DIN EN 81-2/A1:2006
Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts (FOREIGN STANDARD)
DIN EN 81-1:2000
Safety rules for the construction and installation of lifts - Part 1: Electric lifts (includes Corrigendum AC:1999); English version of DIN EN 81-1:1998 + AC:1999 (FOREIGN STANDARD)
DIN EN 81-1/A2:2005
Safety rules for the construction and installation of lifts - Part 1: Electric lifts - A2: Machinery and pulley spaces (FOREIGN STANDARD)
DIN EN 81-1/A1:2006
Safety rules for the construction and installation of lifts - Part 1: Electric lifts (FOREIGN STANDARD)
DIN EN 810:1997
Dehumidifiers with electrically driven compressors - Rating tests, marking, operational requirements and technical data sheet (FOREIGN STANDARD)
DIN EN 806-3:2006
Specifications for installations inside buildings conveying water for human consumption - Part 3: Pipe sizing - Simplified method; German version EN 806-3:2006 (FOREIGN STANDARD)
DIN EN 806-2:2005
Specification for installations inside buildings conveying water for human consumption - Part 2: Design (FOREIGN STANDARD)
DIN EN 806-1:2001
Specifications for installations inside buildings conveying water for human consumption - Part 1: General (includes Amendment A1:2001); English version of DIN EN 806-1:2001 + A1:2001 (FOREIGN STANDARD)
DIN EN 80:2002
Wall-hung urinals - Connecting dimensions; English version of DIN EN 80 (FOREIGN STANDARD)
DIN EN 791:1996
Safety of drill rigs (FOREIGN STANDARD)
DIN EN 779:2003
Particulate air filters for general ventilation - Requirements, testing and marking (FOREIGN STANDARD)
DIN EN 772-9:2005
Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling (FOREIGN STANDARD)
DIN EN 772-7:1998
Methods of test for masonry units - Part 7: Determination of water absorption of clay masonry damp proof course units by boiling in water (FOREIGN STANDARD)
DIN EN 772-6:2002
Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units; English version of DIN EN 772-6 (FOREIGN STANDARD)
DIN EN 772-5:2002
Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units; English version of DIN EN 772-5 (FOREIGN STANDARD)
DIN EN 772-4:1998
Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units (FOREIGN STANDARD)
DIN EN 772-3:1998
Methods of test for masonry units - Part 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing (FOREIGN STANDARD)
DIN EN 772-20:2005
Methods of test for masonry units - Part 20: Determination of flatness of faces of masonry units (FOREIGN STANDARD)
DIN EN 772-2:2005
Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation) (FOREIGN STANDARD)
DIN EN 772-19:2000
Methods of test for masonry units - Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units; English version of DIN EN 772-19 (FOREIGN STANDARD)
DIN EN 772-18:2000
Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units; English version of DIN EN 772-18 (FOREIGN STANDARD)
DIN EN 772-16:2005
Methods of test for masonry units - Part 16: Determination of dimensions (FOREIGN STANDARD)
DIN EN 772-15:2000
Methods of test for masonry units - Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units; English version of DIN EN 772-15 (FOREIGN STANDARD)
DIN EN 772-14:2002
Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units; English version of DIN EN 772-14 (FOREIGN STANDARD)
DIN EN 772-13:2000
Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone); English version of DIN EN 772-13 (FOREIGN STANDARD)
DIN EN 772-10:1999
Methods of test for masonry units - Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units (FOREIGN STANDARD)
DIN EN 772-1:2000
Methods of test for masonry units - Part 1: Determination of compressive strength; English version of DIN EN 772-1 (FOREIGN STANDARD)
DIN EN 771-6:2005
Specifications for masonry units - Part 6: Natural stone masonry units (FOREIGN STANDARD)
DIN EN 771-5:2005
Specification for masonry units - Part 5: Manufactured stone masonry units (FOREIGN STANDARD)
DIN EN 771-4:2005
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units (FOREIGN STANDARD)
DIN EN 771-3:2005
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates) (FOREIGN STANDARD)
DIN EN 771-2:2005
Specification for masonry units - Part 2: Calcium silicate masonry units (FOREIGN STANDARD)
DIN EN 771-1:2005
Specification for masonry units - Part 1: Clay masonry units (FOREIGN STANDARD)
DIN EN 74-3:2007
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures; German version EN 74-3:2007 (FOREIGN STANDARD)
DIN EN 74-2:2009
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures; German version EN 74-2:2008 (Foreign Standard)
DIN EN 74-1:2005
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures (FOREIGN STANDARD)
DIN EN 695:2005
Kitchen sinks - Connecting dimensions (FOREIGN STANDARD)
DIN EN 680:2006
Determination of the drying shrinkage of autoclaved aerated concrete (FOREIGN STANDARD)
DIN EN 679:2005
Determination of the compressive strength of autoclaved aerated concrete (FOREIGN STANDARD)
DIN EN 678:1994
Determination of the dry density of autoclaved aerated concrete (FOREIGN STANDARD)
DIN EN 677:1998
Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW (FOREIGN STANDARD)
DIN EN 656:2000
Gas fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW but not exceeding 300 kW; English version of DIN EN 656 (FOREIGN STANDARD)
DIN EN 656/A1:2006
Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW; German version EN 656:1999/A1:2006 (FOREIGN STANDARD)
DIN EN 627:1995
Specification for data logging and monitoring of lifts, escalators and passenger conveyors (FOREIGN STANDARD)
DIN EN 625:1995
Gas-fired central heating boilers - Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW (FOREIGN STANDARD)
DIN EN 612:2005
Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet (FOREIGN STANDARD)
DIN EN 596:1996
Test methods for timber structures - Soft body impact testing of timber framed walls (FOREIGN STANDARD)
DIN EN 595:1996
Test methods for timber structures - Testing of trusses for the determination of strength and deformation behaviour (FOREIGN STANDARD)
DIN EN 594:1996
Test methods for timber structures - Determination of racking strength and stiffness of timber frame wall panels (FOREIGN STANDARD)
DIN EN 58:2004
Bitumen and bituminous binders - Sampling bituminous binders (FOREIGN STANDARD)
DIN EN 544:2006
Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods (FOREIGN STANDARD)
DIN EN 539-2 Berichtigung 1:2009
Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 2: Test for frost resistance; German version EN 539-2:2006, Corrigendum to DIN EN 539-2:2006; German version EN 539-2:2006/AC:2008 (Foreign Standard)
DIN EN 539-2:2006
Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 2: Test for frost resistance; German version EN 539-2:2006 (FOREIGN STANDARD)
DIN EN 539-1:2005
Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 1: Impermeability test (FOREIGN STANDARD)
DIN EN 536:1999
Road construction machines - Asphalt mixing plants - Safety requirements (FOREIGN STANDARD)
DIN EN 534:2006
Corrugated bitumen sheets - Product specification and test methods; German version EN 534:2006 (FOREIGN STANDARD)
DIN EN 525:1997
Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW (FOREIGN STANDARD)
DIN EN 517:2006
Prefabricated accessories for roofing - Roof safety hooks (FOREIGN STANDARD)
DIN EN 516:2006
Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps (FOREIGN STANDARD)
DIN EN 508-3:2009
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel; German version EN 508-3:2008 (Foreign Standard)
DIN EN 508-2:2009
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium; German version EN 508-2:2008 (Foreign Standard)
DIN EN 508-1:2009
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel; German version EN 508-1:2008 (Foreign Standard)
DIN EN 506:2009
Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet; German version EN 506:2008 (Foreign Standard)
DIN EN 501:1994
Roofing products from metal sheet - Specification for fully supported roofing products of zinc sheet (FOREIGN STANDARD)
DIN EN 500-4:2007
Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines; German version EN 500-4:2006 (FOREIGN STANDARD)
DIN EN 495-5:2001
Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 495-5 (FOREIGN STANDARD)
DIN EN 494:2007
Fibre-cement profiled sheets and fittings - Product specification and test methods; German version EN 494:2004+A1:2005+A2:2006+A3:2007 (FOREIGN STANDARD)
DIN EN 492:2006
Fibre-cement slates and fittings - Product specification and test methods (FOREIGN STANDARD)
DIN EN 491 Berichtigung 1:2007
Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods; German version EN 491:2004, Corrigenda to DIN EN 491:2005-03 (FOREIGN STANDARD)
DIN EN 491:2005
Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods (FOREIGN STANDARD)
DIN EN 490:2006
Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications; German version EN 490:2004 + A1:2006 (FOREIGN STANDARD)
DIN EN 483:2000
Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW; English version of DIN EN 483 (FOREIGN STANDARD)
DIN EN 483/A2:2002
Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW; English version of DIN EN 483:1999/A2:2001 (FOREIGN STANDARD)
DIN EN 451-2:1995
Method of testing fly ash - Determination of fineness by wet sieving (FOREIGN STANDARD)
DIN EN 450-2:2005
Fly ash for concrete - Part 2: Conformity evaluation (FOREIGN STANDARD)
DIN EN 450-1:2008
Fly ash concrete - Part 1: Definition, specifications and conformity criteria; German version EN 450-1:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 447:2008
Grout for prestressing tendons - Basic requirements; German version EN 447:2007 (FOREIGN STANDARD)
DIN EN 446:2008
Grout for prestressing tendons - Grouting procedures; German version EN 446:2007 (FOREIGN STANDARD)
DIN EN 445:2008
Grout for prestressing tendons - Test methods; German version EN 445:2007 (FOREIGN STANDARD)
DIN EN 413-2:2005
Masonry cement - Part 2: Test methods (FOREIGN STANDARD)
DIN EN 413-1:2004
Masonry cement - Part 1: Composition, specifications and conformity criteria (FOREIGN STANDARD)
DIN EN 40-4 Berichtigung 1:2008
Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns; German version EN 40-4:2005; Corrigenda to DIN EN 40-4:2006-06, German version EN 40-4:2005/AC:2006 (FOREIGN STANDARD)
DIN EN 40-4:2006
Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns; German version EN 40-4:2005 (FOREIGN STANDARD)
DIN EN 40-3-2:2002
Lighting columns - Part 3-2: Design and verification; Verification by testing (FOREIGN STANDARD)
DIN EN 40-3-1:2002
Lighting columns - Part 3-1: Design and verification; Specification for characteristic loads (FOREIGN STANDARD)
DIN EN 383:2007
Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners; German version EN 383:2007 (FOREIGN STANDARD)
DIN EN 380:1993
Timber structures; test methods; general principles for static load testing (FOREIGN STANDARD)
DIN EN 38:1992
Wall hung W.C. pan with independent water supply; connecting dimensions (FOREIGN STANDARD)
DIN EN 37:1999
Pedestal W.C. pans with independent water supply - Connecting dimensions (FOREIGN STANDARD)
DIN EN 36:1999
Wall-hung bidets with over-rim supply - Connecting dimensions (FOREIGN STANDARD)
DIN EN 35:2000
Pedestal bidets with over-rim supply - Connecting dimensions; English version of DIN EN 35 (FOREIGN STANDARD)
DIN EN 34:1992
Wall hung W.C. pan with close coupled cistern; connecting dimensions (FOREIGN STANDARD)
DIN EN 32:1999
Wall-hung wash basins - Connecting dimensions (FOREIGN STANDARD)
DIN EN 31:1999
Pedestal wash basins - Connecting dimensions (FOREIGN STANDARD)
DIN EN 303-7:2007
Heating boilers - Part 7: Gas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1 000 kW; German version EN 303-7:2006 (FOREIGN STANDARD)
DIN EN 303-6:2000
Heating boilers - Part 6: Heating boilers with forced draught burner - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceedng 70 (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 29052-1:1992
Acoustics; determination of dynamic stiffness; part 1: materials used under floating floors in dwellings (FOREIGN STANDARD)
DIN EN 29048:1991
Building construction; jointing products; determination of extrudability of sealants using standardized apparatus (ISO 9048:1987) (FOREIGN STANDARD)
DIN EN 28970:1991
Timber structures; testing of joints made with mechanical fasteners; requirements for wood density (ISO 8970:1989) (FOREIGN STANDARD)
DIN EN 28394:1991
Building construction; jointing products; determination of extrudability of one-component sealants (ISO 8394:1988) (FOREIGN STANDARD)
DIN EN 274-3:2002
Waste fittings for sanitary appliances - Part 3: Quality control; English version of DIN EN 274-3 (FOREIGN STANDARD)
DIN EN 274-2:2002
Waste fittings for sanitary appliances - Part 2: Test methods; English version of DIN EN 274-2 (FOREIGN STANDARD)
DIN EN 274-1:2002
Waste fittings for sanitary appliances - Part 1: Requirements; English version of DIN EN 274-1 (FOREIGN STANDARD)
DIN EN 26927:1991
Building construction; jointing products; sealants; vocabulary (ISO 6927:1981) (FOREIGN STANDARD)
DIN EN 26891:1991
Timber structures; joints made with mechanical fasteners; general principles for the determination of strength and deformation characteristics (ISO 6891:1983) (FOREIGN STANDARD)
DIN EN 259-2:2001
Wallcoverings in roll form - Heavy duty wallcoverings - Part 2: Determination of impact resistance; English version of DIN EN 259-2 (FOREIGN STANDARD)
DIN EN 259-1:2001
Wallcoverings in roll form - Heavy duty wallcoverings - Part 1: Specifications; English version of DIN EN 259-1 (FOREIGN STANDARD)
DIN EN 248:2003
Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr (FOREIGN STANDARD)
DIN EN 234:1997
Wallcoverings in roll form - Specification for wallcoverings for subsequent decoration (includes Amendment A1:1996) (FOREIGN STANDARD)
DIN EN 233:1999
Wallcoverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings (FOREIGN STANDARD)
DIN EN 215:2007
Thermostatic radiator valves - Requirements and test methods; German version EN 215:2004+A1:2006 (FOREIGN STANDARD)
DIN EN 206-1:2001
Concrete - Part 1: Specification, performance, production and conformity; English version of DIN EN 206-1 (FOREIGN STANDARD)
DIN EN 206-1/A2:2005
Concrete - Part 1: Specification, performance, production and conformity (FOREIGN STANDARD)
DIN EN 206-1/A1:2004
Concrete - Part 1: Specification, performance, production and conformity (FOREIGN STANDARD)
DIN EN 20140-2:1993
Acoustics; measurement of sound insulation in buildings and of building elements; part 2: determination, verification and application of precision data (ISO 140-2:1991) (FOREIGN STANDARD)
DIN EN 20140-10:1992
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 10: Laboratory measurement of airborne sound insulation of small building elements (FOREIGN STANDARD)
DIN EN 200:2008
Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification; German version EN 200:2008 (Foreign Standard)
DIN EN 1998-6:2006
Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys (FOREIGN STANDARD)
DIN EN 1998-5:2006
Eurocode 8: Design of structures for earthquake resistance - Part 5: Foundations, retaining structures and geotechnical aspects (FOREIGN STANDARD)
DIN EN 1998-4:2007
Eurocode 8: Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines; German version EN 1998-4:2006 (FOREIGN STANDARD)
DIN EN 1998-3:2006
Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings (FOREIGN STANDARD)
DIN EN 1998-2:2006
Eurocode 8: Design of structures for earthquake resistance - Part 2: Bridges; German version EN 1998-2:2005 (FOREIGN STANDARD)
DIN EN 1998-1:2006
Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings (FOREIGN STANDARD)
DIN EN 1997-2:2007
Eurocode 7: Geotechnical design - Part 2: Ground investigation and testing; German version EN 1997-2:2007 (FOREIGN STANDARD)
DIN EN 1997-1:2008
Eurocode 7: Geotechnical design - Part 1: General rules; German version EN 1997-1:2004 (Foreign Standard)
DIN EN 1996-3:2006
Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures (FOREIGN STANDARD)
DIN EN 1996-2:2006
Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry (FOREIGN STANDARD)
DIN EN 1996-1-1:2006
Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures (FOREIGN STANDARD)
DIN EN 1995-2:2006
Eurocode 5: Design of timber structures - Part 2: Bridges (FOREIGN STANDARD)
DIN EN 1995-1-1:2008
Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings; German version EN 1995-1-1:2004+A1:2008 (Foreign Standard)
DIN EN 1994-2 Berichtigung 1:2008
Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges; German version EN 1994-2:2005, Corrigendum to DIN EN 1994-2:2006-07; German version EN 1994-2:2005/AC:2008 (Foreign Standard)
DIN EN 1994-2:2006
Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges; German version EN 1994-2:2005 (FOREIGN STANDARD)
DIN EN 1994-1-1:2006
Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings; German version EN 1994-1-1:2004 (FOREIGN STANDARD)
DIN EN 1993-5:2007
Eurocode 3: Design of steel structures - Part 5: Piling; German version EN 1993-5:2007 (FOREIGN STANDARD)
DIN EN 1993-5/NA:2008
National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 5: Piling (Foreign Standard)
DIN EN 1993-3-2:2007
Eurocode 3: Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys; German version EN 1993-3-2:2006 (FOREIGN STANDARD)
DIN EN 1993-3-1:2007
Eurocode 3: Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts; German version EN 1993-3-1:2006 (FOREIGN STANDARD)
DIN EN 1993-2:2007
Eurocode 3: Design of steel structures - Part 2: Steel Bridges; German version EN 1993-2:2006 (FOREIGN STANDARD)
DIN EN 1993-1-9:2005
Eurocode 3: Design of steel structures - Part 1-9: Fatigue (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1993-1-8:2005
Eurocode 3: Design of steel structures - Part 1-8: Design of joints (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1993-1-7:2007
Eurocode 3: Design of steel structures - Part 1-7: Plated structures subject to out of plane loading; German version EN 1993-1-7:2007 (FOREIGN STANDARD)
DIN EN 1993-1-6:2007
Eurocode 3: Design of steel structures - Part 1-6: Strength and stability of shell structures; German version EN 1993-1-6:2007 (FOREIGN STANDARD)
DIN EN 1993-1-5:2007
Eurocode 3: Design of steel structures - Part 1-5: Plated structural elements; German version EN 1993-1-5:2006 (FOREIGN STANDARD)
DIN EN 1993-1-4:2007
Eurocode 3: Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels; German version EN 1993-1-4:2006 (FOREIGN STANDARD)
DIN EN 1993-1-3:2007
Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting; German version EN 1993-1-3:2006 (FOREIGN STANDARD)
DIN EN 1993-1-12:2007
Eurocode 3: Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S700; German version EN 1993-1-12:2007 (FOREIGN STANDARD)
DIN EN 1993-1-11:2007
Eurocode 3: Design of steel structures - Part 1-11: Design of structures with tension components; German version EN 1993-1-11:2006 (FOREIGN STANDARD)
DIN EN 1993-1-10:2005
Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties (FOREIGN STANDARD)
DIN EN 1993-1-1:2005
Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1992-3:2006
Eurocode 2: Design of concrete structures - Part 3: Liquid retaining and containment structures; German version EN 1992-3:2006 (FOREIGN STANDARD)
DIN EN 1992-2:2007
Eurocode 2: Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules; German version EN 1992-2:2005 (FOREIGN STANDARD)
DIN EN 1992-1-1:2005
Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings (FOREIGN STANDARD)
DIN EN 1991-4:2006
Eurocode 1: Actions on structures - Part 4: Silos and tanks; German version EN 1991-4:2006 (FOREIGN STANDARD)
DIN EN 1991-2:2004
Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges (FOREIGN STANDARD)
DIN EN 1991-1-7:2007
Eurocode 1: Actions on structures - Part 1-7: General actions - Accidental actions; German version EN 1991-1-7:2006 (FOREIGN STANDARD)
DIN EN 1991-1-6:2005
Eurocode 1: Actions on structures - Part 1-6: General actions, Actions during execution (FOREIGN STANDARD)
DIN EN 1991-1-5:2004
Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions (FOREIGN STANDARD)
DIN EN 1991-1-4:2005
Eurocode 1: Actions on structures - Part 1-4: General actions, Wind actions (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1991-1-3:2004
Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads (FOREIGN STANDARD)
DIN EN 1991-1-1:2002
Eurocode 1: Actions on structures - Part 1-1: General actions; Densities, self-weight, imposed loads for buildings (FOREIGN STANDARD)
DIN EN 1990:2002
Eurocode: Basis of structural design (FOREIGN STANDARD)
DIN EN 1990/A1:2006
Eurocode: Basis of structural design; German version EN 1990:2002/A1:2005 (FOREIGN STANDARD)
DIN EN 198:2008
Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods; German version EN 198:2008 (Foreign Standard)
DIN EN 197-4:2004
Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 197-2:2000
Cement - Part 2: Conformity evaluation; English version of DIN EN 197-2 (FOREIGN STANDARD)
DIN EN 197-1/A3:2007
Cement - Part 1: Composition, specifications and conformity criteria for common cements; German version EN 197-1:2000/A3:2007 (FOREIGN STANDARD)
DIN EN 196-9:2004
Methods of testing cement - Part 9: Heat of hydration; Semi-adiabatic method (FOREIGN STANDARD)
DIN EN 196-8:2004
Methods of testing cement - Part 8: Heat of hydration - Solution method (FOREIGN STANDARD)
DIN EN 196-7:2008
Methods of testing cement - Part 7: Methods of taking and preparing samples of cement; German version EN 196-7:2007 (FOREIGN STANDARD)
DIN EN 196-6:1990
Methods of testing cement; determination of fineness (FOREIGN STANDARD)
DIN EN 196-5:2005
Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement (FOREIGN STANDARD)
DIN EN 196-3:2009
Methods of testing cement - Part 3: Determination of setting times and soundness; German version EN 196-3:2005+A1:2008 (Foreign Standard)
DIN EN 196-2:2005
Methods of testing cement - Part 2: Chemical analysis of cement (FOREIGN STANDARD)
DIN EN 196-10:2006
Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement; German version EN 196-10:2006 (FOREIGN STANDARD)
DIN EN 196-1:2005
Methods of testing cement - Part 1: Determination of strength (FOREIGN STANDARD)
DIN EN 1946-5:2000
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5: Measurements by pipe test methods; English version of DIN EN 1946-5 (FOREIGN STANDARD)
DIN EN 1946-4:2000
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 4: Measurements by hot box methods; English version of DIN EN 1946-4 (FOREIGN STANDARD)
DIN EN 1946-3:1999
Thermal performance of building products and building components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by heat flow meter method (FOREIGN STANDARD)
DIN EN 1946-2:1999
Thermal performance of building products and building components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 2: Measurements by guarded hot plate method (FOREIGN STANDARD)
DIN EN 1946-1:1999
Thermal performance of building products and building components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 1: Common criteria (FOREIGN STANDARD)
DIN EN 1937:1999
Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures (FOREIGN STANDARD)
DIN EN 1935:2002
Building hardware - Single-axis hinges - Requirements and test methods (FOREIGN STANDARD)
DIN EN 1934:1998
Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry (FOREIGN STANDARD)
DIN EN 1933:1999
Exterior blinds - Resistance to load due to water accumulation - Test method (FOREIGN STANDARD)
DIN EN 1932:2001
External blinds and shutters - Resistance to wind loads - Method of testing; English version of DIN EN 1932 (FOREIGN STANDARD)
DIN EN 1931:2001
Bitumen, plastic and rubber sheets for roof waterproofing - Determination of water vapour transmission properties; English version of DIN EN 1931 (FOREIGN STANDARD)
DIN EN 1928:2000
Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness; English version of DIN EN 1928 (FOREIGN STANDARD)
DIN EN 1906:2002
Building hardware - Lever handles and knob furniture - Requirements and test methods; English version of DIN EN 1906 (FOREIGN STANDARD)
DIN EN 1886:2009
Ventilation for buildings - Air handling units - Mechanical performance; German version EN 1886:2007 (Foreign Standard)
DIN EN 1881:2007
Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method; German version EN 1881:2006 (FOREIGN STANDARD)
DIN EN 1877-2:2000
Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number; English v (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 1877-1:2000
Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent; English version of DIN EN 1877-1 (FOREIGN STANDARD)
DIN EN 1873:2006
Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods (FOREIGN STANDARD)
DIN EN 1859:2006
Chimneys - Metal chimneys - Test methods; German version EN 1859:2000 + A1:2006 (FOREIGN STANDARD)
DIN EN 1859:2006
Chimneys - Metal chimneys - Test methods; German version EN 1859:2000 + A1:2006 (FOREIGN STANDARD)
DIN EN 1858:2009
Chimneys - Components - Concrete flue blocks; German version EN 1858:2008 (Foreign Standard)
DIN EN 1858:2009
Chimneys - Components - Concrete flue blocks; German version EN 1858:2008 (Foreign Standard)
DIN EN 1857:2008
Chimneys - Components - Concrete flue liners; German version EN 1857:2003+A1:2008 (FOREIGN STANDARD)
DIN EN 1857:2008
Chimneys - Components - Concrete flue liners; German version EN 1857:2003+A1:2008 (FOREIGN STANDARD)
DIN EN 1856-2:2004
Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes (FOREIGN STANDARD)
DIN EN 1856-2:2004
Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes (FOREIGN STANDARD)
DIN EN 1856-1:2006
Chimneys - Requirements for metal chimneys - Part 1: System chimney products; German version EN 1856-1:2003 + A1:2006 (FOREIGN STANDARD)
DIN EN 1856-1:2006
Chimneys - Requirements for metal chimneys - Part 1: System chimney products; German version EN 1856-1:2003 + A1:2006 (FOREIGN STANDARD)
DIN EN 1850-2:2001
Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1850-2 (FOREIGN STANDARD)
DIN EN 1850-2:2001
Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1850-2 (FOREIGN STANDARD)
DIN EN 1850-1:1999
Flexible sheets for waterproofing - Determination of visible defects - Part 1: Bitumen sheets for roof waterproofing (FOREIGN STANDARD)
DIN EN 1850-1:1999
Flexible sheets for waterproofing - Determination of visible defects - Part 1: Bitumen sheets for roof waterproofing (FOREIGN STANDARD)
DIN EN 1849-2:2001
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1849-2 (FOREIGN STANDARD)
DIN EN 1849-2:2001
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1849-2 (FOREIGN STANDARD)
DIN EN 1849-1:2000
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing (FOREIGN STANDARD)
DIN EN 1849-1:2000
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing (FOREIGN STANDARD)
DIN EN 1848-2:2001
Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1848-2 (FOREIGN STANDARD)
DIN EN 1848-2:2001
Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1848-2 (FOREIGN STANDARD)
DIN EN 1848-1:1999
Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing (FOREIGN STANDARD)
DIN EN 1847:2001
Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Methods for exposure to liquid chemicals, including water; English version of DIN EN 1847 (FOREIGN STANDARD)
DIN EN 1844:2001
Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1844 (FOREIGN STANDARD)
DIN EN 1838:1999
Lighting applications - Emergency lighting (FOREIGN STANDARD)
DIN EN 1806:2006
Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods; German version EN 1806:2006 (FOREIGN STANDARD)
DIN EN 1775:2007
Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations; German version EN 1775:2007 (FOREIGN STANDARD)
DIN EN 1771 Berichtigung 1:2006
Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability using the sand column test; German version EN 1771:2004, Corrigenda to DIN EN 1771:2004-11; German version EN 1771:2004/AC:2005 (Fore
DIN EN 1771:2004
Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability using the sand column test (FOREIGN STANDARD)
DIN EN 1770:1998
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion (FOREIGN STANDARD)
DIN EN 1767:1999
Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis (FOREIGN STANDARD)
DIN EN 1766:2000
Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing; English version of DIN EN 1766 (FOREIGN STANDARD)
DIN EN 1751:1999
Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves (FOREIGN STANDARD)
DIN EN 1745:2002
Masonry and masonry products - Methods for determining design thermal values (FOREIGN STANDARD)
DIN EN 1744-6:2006
Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement; German version EN 1744-6:2006 (FOREIGN STANDARD)
DIN EN 1744-5:2006
Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts; German version EN 1744-5:2006 (FOREIGN STANDARD)
DIN EN 1744-4:2005
Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures (FOREIGN STANDARD)
DIN EN 1744-3:2002
Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates (FOREIGN STANDARD)
DIN EN 1744-1:1998
Tests for chemical properties of aggregates - Part 1: Chemical analysis (FOREIGN STANDARD)
DIN EN 1742:1998
Determination of shear strength between different layers or multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 1741:1998
Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 1740:1998
Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components) (FOREIGN STANDARD)
DIN EN 1739:2007
Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1739:2007 (FOREIGN STANDARD)
DIN EN 1738:1998
Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete (FOREIGN STANDARD)
DIN EN 1737:1998
Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 1670 Berichtigung 1:2008
Building hardware - Corrosion resistance - Requirements and test methods; German version EN 1670:2007, Corrigendum to DIN EN 1670:2007-06; German version EN 1670:2007/AC:2008 (Foreign Standard)
DIN EN 1670:2007
Building hardware - Corrosion resistance - Requirements and test methods; German version EN 1670:2007 (FOREIGN STANDARD)
DIN EN 1609:2007
Thermal insulating products for building applications - Determination of dimensional short term water absorption by partial immersion; German version EN 1609:1996 + A1:2006 (FOREIGN STANDARD)
DIN EN 1608:1997
Thermal insulating products for building applications - Determination of tensile strength parallel to faces (FOREIGN STANDARD)
DIN EN 1607:1997
Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces (FOREIGN STANDARD)
DIN EN 1606:2007
Thermal insulating products for building applications - Determination of compressive creep; German version EN 1606:1996 + A1:2006 (FOREIGN STANDARD)
DIN EN 1605:2007
Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions; German version EN 1605:1996 + A1:2006 (FOREIGN STANDARD)
DIN EN 1604:2007
Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions; German version EN 1604:1996 + A1:2006 (FOREIGN STANDARD)
DIN EN 1603:2007
Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 ?C/ 50 % relative humidity); German version EN 1603:1996 + A1:2006 (FOREIGN STANDARD)
DIN EN 1602:1997
Thermal insulating products for building applications - Determination of the apparent density (FOREIGN STANDARD)
DIN EN 15665:2009
Ventilation for buildings - Determining performance criteria for residential ventilation systems; German version EN 15665:2009 (Foreign Standard)
DIN EN 15644:2009
Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements; German version EN 15644:2008 (Foreign Standard)
DIN EN 15603:2008
Energy performance of buildings - Overall energy use and definition of energy ratings; German version EN 15603:2008 (Foreign Standard)
DIN EN 15564:2009
Precast concrete products - Resin bound concrete - Requirements and test methods; German version EN 15564:2008 (Foreign Standard)
DIN EN 15498:2008
Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance; German version EN 15498:2008 (FOREIGN STANDARD)
DIN EN 15459:2008
Energy performance of buildings - Economic evaluation procedure for energy systems in buildings; German version EN 15459:2007 (FOREIGN STANDARD)
DIN EN 15456:2008
Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements; German version EN 15456:2008 (FOREIGN STANDARD)
DIN EN 1544:2007
Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars; Ge (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 15435:2008
Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance; German version EN 15435:2008 (Foreign Standard)
DIN EN 1543:1998
Products and systems for the production and repair of concrete structures - Test methods - Determination of tensile strength development for polymers (FOREIGN STANDARD)
DIN EN 15422:2008
Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes; German version EN 15422:2008 (FOREIGN STANDARD)
DIN EN 1542:1999
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off (FOREIGN STANDARD)
DIN EN 15417:2006
Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input greater than 70 kW but not exceeding 1000 kW; German version EN 15417:2006 (FOREIGN STANDARD)
DIN EN 15388:2008
Agglomerated stone - Slabs and cut-to-size products for vanity and kitchen tops; German version EN 15388:2008 (FOREIGN STANDARD)
DIN EN 15377-3:2007
Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 3: Optimizing for use of renewable energy sources; German version EN 15377-3:2007 (FOREIGN STANDARD)
DIN EN 15377-2:2008
Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 2: Design, dimensioning and installation; German version EN 15377-2:2008 (Foreign Standard)
DIN EN 15377-1:2009
Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 1: Determination of the design heating and cooling capacity; German version EN 15377-1:2008 (Foreign Standard)
DIN EN 15361:2007
Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete; German version EN 15361:2007 (FOREIGN STANDARD)
DIN EN 15332:2008
Heating boilers - Energy assessment of hot water storage systems; German version EN 15332:2007 (FOREIGN STANDARD)
DIN EN 15319:2007
General principles of design of fibrous (gypsum) plaster works; German version EN 15319:2007 (FOREIGN STANDARD)
DIN EN 15318:2008
Design and application of gypsum blocks; German version EN 15318:2007 (FOREIGN STANDARD)
DIN EN 15316-4-7:2009
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-7: Space heating generation systems, biomass combustion systems; German version EN 15316-4-7:2008 (Foreign Standard)
DIN EN 15316-4-5:2007
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: Space heating generation systems, the performance and quality of district heating and large volume (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 15316-4-4:2007
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-4: Heat generation systems, building-integrated cogeneration systems; German version EN 15316-4-4:2007 (FOREIGN STANDARD)
DIN EN 15316-4-2:2008
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems, heat pump systems; Deutsche Fassung DIN EN 15316-4-2:2008-09 (Foreign Standard)
DIN EN 15316-4-1:2008
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating generation systems, combustion systems (boilers); German version EN 15316-4-1:2008 (Foreign Standard)
DIN EN 15316-3-3:2008
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-3: Domestic hot water systems, generation; German version EN 15316-3-3:2007 (FOREIGN STANDARD)
DIN EN 15316-3-2:2008
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-2: Domestic hot water systems, distribution; German version EN 15316-3-2:2007 (Foreign Standard)
DIN EN 15316-3-1:2008
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-1: Domestic hot water systems, characterisation of needs (tapping requirements); German version EN 15316-3-1:2007 (FOREIGN STANDARD)
DIN EN 15316-2-3:2007
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-3: Space heating distribution systems; German version EN 15316-2-3:2007 (FOREIGN STANDARD)
DIN EN 15316-2-1:2007
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-1: Space heating emission systems; German version EN 15316-2-1:2007 (FOREIGN STANDARD)
DIN EN 15316-1:2007
Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General; German version EN 15316-1:2007 (FOREIGN STANDARD)
DIN EN 15304:2007
Determination of the freeze-thaw resistance of autoclaved aerated concrete; German version EN 15304:2007 (FOREIGN STANDARD)
DIN EN 1530:2000
Door leaves - General and local flatness - Tolerance classes; English version of DIN EN 1530 (FOREIGN STANDARD)
DIN EN 1529:2000
Door leaves - Height, width, thickness and squareness - Tolerance classes; English version of DIN EN 1529 (FOREIGN STANDARD)
DIN EN 15287-2:2008
Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances; German version EN 15287-2:2008 (FOREIGN STANDARD)
DIN EN 15285:2008
Agglomerated stone - Modular tiles for flooring and stairs (internal and external); German version EN 15285:2008 (Foreign Standard)
DIN EN 1527:1998
Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods (FOREIGN STANDARD)
DIN EN 15258:2009
Precast concrete products - Retaining wall elements; German version EN 15258:2008 (Foreign Standard)
DIN EN 15255:2007
Energy performance of buildings - Sensible room cooling load calculation - General criteria and validation procedures; German version EN 15255:2007 (FOREIGN STANDARD)
DIN EN 15251:2007
Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics; German version EN 15251:2007 (FOREIGN STANDARD)
DIN EN 15243:2007
Ventilation for buildings - Calculation of room temperatures and of load and energy for buildings with room conditioning systems; German version EN 15243:2007 (FOREIGN STANDARD)
DIN EN 15242:2007
Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration; German version EN 15242:2007 (FOREIGN STANDARD)
DIN EN 15241:2007
Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in commercial buildings; German version EN 15241:2007 (FOREIGN STANDARD)
DIN EN 15240:2007
Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of air-conditioning systems; German version EN 15240:2007 (FOREIGN STANDARD)
DIN EN 15239:2007
Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems; German version EN 15239:2007 (FOREIGN STANDARD)
DIN EN 15217:2007
Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings; German version EN 15217:2007 (FOREIGN STANDARD)
DIN EN 1521:1996
Determination of flexural strength of lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 15200:2007
Sanitary appliances - Multifunction shower cabinets; German version EN 15200:2007 (FOREIGN STANDARD)
DIN EN 1520:2003
Prefabricated reinforced components of lightweight aggregate concrete with open structure (includes corrigendum AC:2003) (FOREIGN STANDARD)
DIN EN 15193:2008
Energy performance of buildings - Energy requirements for lighting; German version EN 15193:2007 (FOREIGN STANDARD)
DIN EN 15184:2006
Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test); German version EN 15184:2006 (FOREIGN STANDARD)
DIN EN 15183:2006
Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test; German version EN 15183:2006 (FOREIGN STANDARD)
DIN EN 15167-2:2006
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Confomity evaluation; German version EN 15167-2:2006 (FOREIGN STANDARD)
DIN EN 15167-1:2006
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria; German version EN 15167-1:2006 (FOREIGN STANDARD)
DIN EN 15161:2007
Water conditioning equipment inside buildings - Installation, operation, maintenance and repair; German version EN 15161:2006 (FOREIGN STANDARD)
DIN EN 15116:2008
Ventilation in buildings - Chilled beams - Testing and rating of active chilled beams; German version EN 15116:2008 (FOREIGN STANDARD)
DIN EN 15102:2008
Decorative wallcoverings - Roll and panel form products; German version EN 15102:2007 (FOREIGN STANDARD)
DIN EN 15092:2008
Building valves - Inline hot water supply tempering valves - Tests and requirements; German version EN 15092:2008 (Foreign Standard)
DIN EN 15091:2007
Sanitary tapware - Electronic opening and closing sanitary tapware; German version EN 15091:2006 (FOREIGN STANDARD)
DIN EN 1507:2006
Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage; German version EN 1507:2006 (FOREIGN STANDARD)
DIN EN 1506:2007
Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions; German version EN 1506:2007 (FOREIGN STANDARD)
DIN EN 15057:2006
Fibre cement profiled sheets - Impact resistance test method; German version EN 15057:2006 (FOREIGN STANDARD)
DIN EN 15050:2007
Precast concrete products - Bridge elements; German version EN 15050:2007 (FOREIGN STANDARD)
DIN EN 1505:1998
Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions (FOREIGN STANDARD)
DIN EN 1504-8:2005
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity (FOREIGN STANDARD)
DIN EN 1504-5:2005
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection (FOREIGN STANDARD)
DIN EN 1504-4:2005
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding (FOREIGN STANDARD)
DIN EN 15037-1:2008
Precast concrete products - Beam-and-block floor systems - Part 1: Beams; German version EN 15037-1:2008 (FOREIGN STANDARD)
DIN EN 15026:2007
Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation; German version EN 15026:2007 (FOREIGN STANDARD)
DIN EN 14992:2007
Precast concrete products - Wall elements; German version EN 14992:2007 (FOREIGN STANDARD)
DIN EN 14989-2:2008
Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances; German version EN 14989-2:2007 (FOREIGN STANDARD)
DIN EN 14989-1:2007
Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances; German version EN 14989-1:2007 (FOREIGN STANDARD)
DIN EN 14975:2007
Loft ladders - Requirements, marking and testing; German version EN 14975:2006 (FOREIGN STANDARD)
DIN EN 14964:2007
Rigid underlays for discontinuous roofing - Definitions and characteristics; German version EN 14964:2006 (FOREIGN STANDARD)
DIN EN 1491:2000
Building valves - Expansions valves - Tests and requirements; English version of DIN EN 1491 (FOREIGN STANDARD)
DIN EN 1490:2000
Building valves - Combined temperature and pressure relief valves - Tests and requirements; English version of DIN EN 1490 (FOREIGN STANDARD)
DIN EN 14895:2006
Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders; German version EN 14895:2006 (FOREIGN STANDARD)
DIN EN 14891 Berichtigung 2:2008
Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation; German version EN 14891:2007, Corrigendum to DIN EN 14891:2007-11; Germa
DIN EN 1489:2000
Building valves - Pressure safety valves - Tests and requirements; English version of DIN EN 1489 (FOREIGN STANDARD)
DIN EN 14889-2:2006
Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity; German version EN 14889-2:2006 (FOREIGN STANDARD)
DIN EN 14889-1:2006
Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity; German version EN 14889-1:2006 (FOREIGN STANDARD)
DIN EN 1488:2000
Building valves - Expansion groups - Tests and requirements; English version of DIN EN 1488 (FOREIGN STANDARD)
DIN EN 1487:2000
Building valves - Hydraulic safety groups - Tests and requirements; English version of DIN EN 1487 (FOREIGN STANDARD)
DIN EN 14846:2008
Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods; German version EN 14846:2008 (Foreign Standard)
DIN EN 14845-2:2006
Test methods for fibres in concrete - Part 2: Effect on concrete; German version EN 14845-2:2006 (FOREIGN STANDARD)
DIN EN 14845-1:2007
Test methods for fibres in concrete - Part 1: Reference concretes; German version EN 14845-1:2007 (FOREIGN STANDARD)
DIN EN 14844:2009
Precast concrete products - Box culverts; German version EN 14844:2006+A1:2008 (Foreign Standard)
DIN EN 14843:2007
Precast concrete products - Stairs; German version EN 14843:2007 (FOREIGN STANDARD)
DIN EN 14759:2005
Shutters - Acoustic insulation relative to airborne sound - Expression of performance (FOREIGN STANDARD)
DIN EN 14721:2007
Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete; German version EN 14721:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 14716:2005
Stretched ceilings - Requirements and tests methods (FOREIGN STANDARD)
DIN EN 14707:2008
Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation; German version EN 14707:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 14706:2006
Thermal insulation products for building equipment and industrial installations - Determination of maximum service temperature (FOREIGN STANDARD)
DIN EN 14694:2005
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment (FOREIGN STANDARD)
DIN EN 14693:2006
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt; Ge (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 14692:2005
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer (FOREIGN STANDARD)
DIN EN 14691:2005
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Compatibility by heat conditioning (FOREIGN STANDARD)
DIN EN 1469:2005
Natural stone products - Slabs for cladding - Requirements (FOREIGN STANDARD)
DIN EN 14688:2007
Sanitary appliances - Wash basins - Functional requirements and test methods; German version EN 14688:2006 (FOREIGN STANDARD)
DIN EN 14651:2007
Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit or proportionality (LOP), residual); German version EN 14651:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 14650:2005
Precast concrete products - General rules for factory production control of metallic fibered concrete (FOREIGN STANDARD)
DIN EN 14649:2005
Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST) (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 14648:2007
Building hardware - Fittings for shutters - Requirements and test methods; German version EN 14648:2007 (FOREIGN STANDARD)
DIN EN 14647 Berichtigung 1:2007
Calcium aluminate cement - Composition, specifications and conformity criteria; German version EN 14647:2005, Corrigenda to DIN EN 14647:2006-01; German version EN 14647:2005/AC:2006 (FOREIGN STANDARD)
DIN EN 14647:2006
Calcium aluminate cement - Composition, specifications and conformity criteria (FOREIGN STANDARD)
DIN EN 14637:2008
Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance; German version EN 14637:2007 (FOREIGN STANDARD)
DIN EN 14630:2007
Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method; German version EN 14630:2006 (FOREIGN STANDARD)
DIN EN 14629:2007
Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete; German version EN 14629:2007 (FOREIGN STANDARD)
DIN Standards : DIN ICS 91 Construction Materials and Building
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
