DIN Standards : DIN ICS 91 Construction Materials and Building(Page 3)
DIN EN 12618-2:2004
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength (FOREIGN STANDARD)
DIN EN 12618-1:2003
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility (FOREIGN STANDARD)
DIN EN 12617-4:2002
Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion (FOREIGN STANDARD)
DIN EN 12617-3:2002
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents (FOREIGN STANDARD)
DIN EN 12617-2:2004
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage (FOREIGN STANDARD)
DIN EN 12617-1:2003
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS) (FOREIGN STANDARD)
DIN EN 12615:1999
Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength (FOREIGN STANDARD)
DIN EN 12614:2005
Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers (FOREIGN STANDARD)
DIN EN 12605:2000
Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods; English version of DIN EN 12605 (FOREIGN STANDARD)
DIN EN 12604:2000
Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements; English version of DIN EN 12604 (FOREIGN STANDARD)
DIN EN 12599:2000
Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems; English version of DIN EN 12599 (FOREIGN STANDARD)
DIN EN 12589:2002
Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate; English version of DIN EN 12589 (FOREIGN STANDARD)
DIN EN 12541:2003
Pressure flushing valves and automatic closing urinal valves PN 10 (FOREIGN STANDARD)
DIN EN 1253-5:2004
Gullies for buildings - Part 5: Gullies with light liquids closure (FOREIGN STANDARD)
DIN EN 1253-4:2000
Gullies for buildings - Part 4: Access covers; English version of DIN EN 1253-4 (FOREIGN STANDARD)
DIN EN 1253-3:1999
Gullies for buildings - Part 3: Quality control (FOREIGN STANDARD)
DIN EN 1253-2:2004
Gullies for buildings - Part 2: Test methods (FOREIGN STANDARD)
DIN EN 12504-4:2004
Testing concrete in structures - Part 4: Determination of ultrasonic pulse velocity (FOREIGN STANDARD)
DIN EN 12504-3:2005
Testing concrete in structures - Part 3: Determination of pull-out force (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 12504-2:2001
Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number; English version of DIN EN 12504-2 (FOREIGN STANDARD)
DIN EN 12504-1:2009
Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression; German version EN 12504-1:2009 (Foreign Standard)
DIN EN 12489:2000
Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method; English version of DIN EN 12489 (FOREIGN STANDARD)
DIN EN 12480:2007
Gas meters - Rotary displacement gas meters; German version EN 12480:2002+A1:2006 (FOREIGN STANDARD)
DIN EN 12467:2006
Fibre cement flat sheets - Product specification and test methods; German version EN 12467:2004 + A1:2005 + A2:2006 (FOREIGN STANDARD)
DIN EN 12464-2:2007
Light and lighting - Lighting of work places - Part 2: Outdoor work places; German version EN 12464-2:2007 (FOREIGN STANDARD)
DIN EN 12464-1:2003
Light and lighting - Lighting of work places - Part 1: Indoor work places (FOREIGN STANDARD)
DIN EN 12453:2001
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements; English version of DIN EN 12453 (FOREIGN STANDARD)
DIN EN 12446:2003
Chimneys - Components - Concrete outer wall elements (FOREIGN STANDARD)
DIN EN 12445:2001
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods; English version of DIN EN 12445 (FOREIGN STANDARD)
DIN EN 12444:2001
Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation; English version of DIN EN 12444 (FOREIGN STANDARD)
DIN EN 12431:2007
Thermal insulating products for building applications - Determination of thickness for floating floor insulating products; German version EN 12431:1998 + A1:2006 (FOREIGN STANDARD)
DIN EN 12430:2007
Thermal insulating products for building applications - Determination of behaviour under point load; German version EN 12430:1998 + A1:2006 (FOREIGN STANDARD)
DIN EN 12429:1998
Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions (FOREIGN STANDARD)
DIN EN 12428:2000
Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation; English version of DIN EN 12428 (FOREIGN STANDARD)
DIN EN 12427:2000
Industrial, commercial and garage doors and gates - Air permeability - Test method; English version of DIN EN 12427 (FOREIGN STANDARD)
DIN EN 12426:2000
Industrial, commercial and garage doors and gates - Air permeability - Classification; English version of DIN EN 12426 (FOREIGN STANDARD)
DIN EN 12425:2000
Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification; English version of DIN EN 12425 (FOREIGN STANDARD)
DIN EN 12424:2000
Industrial, commercial and garage doors and gates - Resistance to wind load - Classification; English version of DIN EN 12424 (FOREIGN STANDARD)
DIN EN 12418:2000
Masonry and stone cutting-off machines for job site - Safety; English version of DIN EN 12418 (FOREIGN STANDARD)
DIN EN 12412-4:2003
Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 4: Roller shutter boxes (FOREIGN STANDARD)
DIN EN 12412-2:2003
Thermal performance of windows, doors and shutters - Determination of thermal transmittance by hot box method - Part 2: Frames (FOREIGN STANDARD)
DIN EN 12405-1:2007
Gas meters - Conversion devices - Part 1: Volume conversion; German version EN 12405-1:2005+A1:2006 (FOREIGN STANDARD)
DIN EN 12400:2003
Windows and pedestrian doors - Mechanical durability - Requirements and classification (FOREIGN STANDARD)
DIN EN 12390-8:2009
Testing hardened concrete - Part 8: Depth of penetration of water under pressure; German version EN 12390-8:2009 (Foreign Standard)
DIN EN 12390-7:2009
Testing hardened concrete - Part 7: Density of hardened concrete; German version EN 12390-7:2009 (Foreign Standard)
DIN EN 12390-6:2001
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; English version of DIN EN 12390-6 (FOREIGN STANDARD)
DIN EN 12390-5:2009
Testing hardened concrete - Part 5: Flexural strength of test specimens; German version EN 12390-5:2009 (Foreign Standard)
DIN EN 12390-4:2000
Testing hardened concrete - Part 4: Compressive strength; Specification for testing machines; English version of DIN EN 12390-4 (FOREIGN STANDARD)
DIN EN 12390-3:2009
Testing hardened concrete - Part 3: Compressive strength of test specimens; German version EN 12390-3:2009 (Foreign Standard)
DIN EN 12390-2:2009
Testing hardened concrete - Part 2: Making and curing specimens for strength tests; German Version EN 12390-2:2009 (Foreign Standard)
DIN EN 12390-1:2001
Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds; English version of DIN EN 12390-1 (FOREIGN STANDARD)
DIN EN 12365-4:2003
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method (FOREIGN STANDARD)
DIN EN 12365-3:2003
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method (FOREIGN STANDARD)
DIN EN 12365-2:2003
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods (FOREIGN STANDARD)
DIN EN 12365-1:2003
Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification (FOREIGN STANDARD)
DIN EN 12354-6:2004
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces (FOREIGN STANDARD)
DIN EN 12354-4:2001
Building acoustics - Estimation of acoustic performance of buildings from the performance of products - Part 4: Transmission of indoor sound to the outside; English version of DIN EN 12354-4 (FOREIGN STANDARD)
DIN EN 12354-3:2000
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 3: Airborne sound insulation against outdoor sound; English version of DIN EN 12354-3 (FOREIGN STANDARD)
DIN EN 12354-2:2000
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms; English version of DIN EN 12354-2 (FOREIGN STANDARD)
DIN EN 12354-1:2000
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms; English version of DIN EN 12354-1 (FOREIGN STANDARD)
DIN EN 12336:2005
Tunneling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements (FOREIGN STANDARD)
DIN EN 12336/A1:2008
Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements; English version EN 12336:2005/prA1:2008 (FOREIGN STANDARD)
DIN EN 12327:2000
Gas supply systems - Pressure testing, commissioning and decomissioning procedures - Functional requirements; English version of DIN EN 12327 (FOREIGN STANDARD)
DIN EN 12326-2:2004
Slate and stone products for discontinuous roofing and cladding - Part 2: Methods of test (FOREIGN STANDARD)
DIN EN 12326-1:2004
Slate and stone products for discontinuous roofing and cladding - Part 1: Product specification (FOREIGN STANDARD)
DIN EN 12320:2001
Building hardware - Padlocks and padlock fittings - Requirements and test methods; English version of DIN EN 12320 (FOREIGN STANDARD)
DIN EN 12317-2:2001
Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 12317-2 (FOREIGN STANDARD)
DIN EN 12317-1:1999
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints (FOREIGN STANDARD)
DIN EN 12316-2:2001
Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastics and rubber sheets for roof waterproofing; English version of DIN EN 12316-2 (FOREIGN STANDARD)
DIN EN 12316-1:1999
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints (FOREIGN STANDARD)
DIN EN 12311-2:2000
Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 12311-2 (FOREIGN STANDARD)
DIN EN 12311-1:1999
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties (FOREIGN STANDARD)
DIN EN 12310-2:2000
Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 12310-2 (FOREIGN STANDARD)
DIN EN 12310-1:1999
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of resistance to tearing (nail shank) (FOREIGN STANDARD)
DIN EN 12269-2:2004
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test (FOREIGN STANDARD)
DIN EN 12269-1:2000
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test; English version of DIN EN 12269-1 (FOREIGN STANDARD)
DIN EN 12261:2007
Gas meters - Turbine gas meters; German version EN 12261:2002 + A1:2006 (FOREIGN STANDARD)
DIN EN 12239:2001
Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications; English version of DIN EN 12239 (FOREIGN STANDARD)
DIN EN 12238:2001
Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application; English version of DIN EN 12238 (FOREIGN STANDARD)
DIN EN 12237:2003
Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts (FOREIGN STANDARD)
DIN EN 12236:2002
Ventilation for buildings - Ductwork hangers and supports - Requirements for strength; English version of DIN EN 12236 (FOREIGN STANDARD)
DIN EN 12219:2000
Doors - Climatic influences - Requirements and classification; English version of DIN EN 12219 (FOREIGN STANDARD)
DIN EN 12217:2004
Doors - Operating forces - Requirements and classification (FOREIGN STANDARD)
DIN EN 12211:2000
Windows and doors - Resistance to wind load - Test method; English version of DIN EN 12211 (FOREIGN STANDARD)
DIN EN 12210:2003
Windows and doors - Resistance to wind load - Classification (includes Corrigendum AC:2002) (FOREIGN STANDARD)
DIN EN 12209 Berichtigung 1:2006
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods; German version EN 12209:2003, Corrigenda to DIN EN 12209:2004-03; German version EN 12209:2003/AC:2005 (FOREIGN STANDARD)
DIN EN 12209:2004
Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods (FOREIGN STANDARD)
DIN EN 12208:2000
Windows and doors - Watertightness - Classification; English version of DIN EN 12208 (FOREIGN STANDARD)
DIN EN 12207:2000
Windows and doors - Air permeability - Classification; English version of DIN EN 12207 (FOREIGN STANDARD)
DIN EN 12194:2000
Shutters, external and internal blinds - Misuse - Test methods; English version of DIN EN 12194 (FOREIGN STANDARD)
DIN EN 12192-1:2002
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar (FOREIGN STANDARD)
DIN EN 12190:1998
Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar (FOREIGN STANDARD)
DIN EN 12189:1999
Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time (FOREIGN STANDARD)
DIN EN 12188:1999
Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterization of structural bonding agents (FOREIGN STANDARD)
DIN EN 12179:2000
Curtain walling - Resistance to wind load - Test method; English version of DIN EN 12179 (FOREIGN STANDARD)
DIN EN 12171:2002
Heating systems in buildings - Procedure for the preparation of document for operation, maintenance and use - Heating systems not requiring a trained operator (FOREIGN STANDARD)
DIN EN 12170:2002
Heating systems in buildings - Procedure for the preparation of document in respect of operation, maintenance and use - Heating systems requiring a trained operator (FOREIGN STANDARD)
DIN EN 12159:2001
Builders' hoists for persons and materials with vertically guided cages; English version of DIN EN 12159 (FOREIGN STANDARD)
DIN EN 12159/A1:2008
Builders hoists for persons and materials with vertically guided cages; English version EN 12159:2000/prA1:2008 (Foreign Standard)
DIN EN 12158-2:2001
Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices; English version of DIN EN 12158-2 (FOREIGN STANDARD)
DIN EN 12158-1:2001
Builders' hoists for goods - Part 1: Hoists with accessible platforms; English version of DIN EN 12158-1 (FOREIGN STANDARD)
DIN EN 12155:2000
Curtain walling - Watertightness - Laboratory test under static pressure; English version of DIN EN 12155 (FOREIGN STANDARD)
DIN EN 12154:2000
Curtain walling - Watertightness - Performance requirements and classification; English version of DIN EN 12154 (FOREIGN STANDARD)
DIN EN 12153:2000
Curtain walling - Air permeability - Test methods; English version of DIN EN 12153 (FOREIGN STANDARD)
DIN EN 12152:2002
Curtain walling - Air permeability - Performance requirements and classification (FOREIGN STANDARD)
DIN EN 12151:2008
Machinery and plants for the preparation of concrete and mortar - Safety requirements; German version EN 12151:2007 (FOREIGN STANDARD)
DIN EN 12149:1998
Wallcoverings in roll form - Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release (FOREIGN STANDARD)
DIN EN 12114:2000
Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method; English version of DIN EN 12114 (FOREIGN STANDARD)
DIN EN 12111:2003
Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements (FOREIGN STANDARD)
DIN EN 12110:2003
Tunnelling machines - Air locks - Safety requirements (FOREIGN STANDARD)
DIN EN 12109:1999
Vacuum drainage systems inside buildings (FOREIGN STANDARD)
DIN EN 12098-5:2005
Controls for heating systems - Part 5: Start-stop schedulers for heating systems (FOREIGN STANDARD)
DIN EN 12098-3:2003
Controls for heating systems - Part 3: Outside temperature compensated control equipment for electrical heating systems (FOREIGN STANDARD)
DIN EN 12098-2:2001
Controls for heating systems - Part 2: Optimum start-stop control equipment for hot water heating systems; English version of DIN EN 12098-2 (FOREIGN STANDARD)
DIN EN 12098-1:1996
Controls for heating systems - Part 1: Outside temperature compensated control equipment for hot water heating systems (FOREIGN STANDARD)
DIN EN 12097:2006
Ventilation for buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems; German version EN 12097:2006 (FOREIGN STANDARD)
DIN EN 12091:1997
Thermal insulating products for building applications - Determination of freeze-thaw resistance (FOREIGN STANDARD)
DIN EN 12090:1997
Thermal insulating products for building applications - Determination of shear behaviour (FOREIGN STANDARD)
DIN EN 12089:1997
Thermal insulating products for building applications - Determination of bending behaviour (FOREIGN STANDARD)
DIN EN 12088:1997
Thermal insulating products for building applications - Determination of long-term water absorption by diffusion (FOREIGN STANDARD)
DIN EN 12087:2007
Thermal insulating products for building applications - Determination of long term water absorption by immersion; German version EN 12087:1997 + A1:2006 (FOREIGN STANDARD)
DIN EN 12086:1997
Thermal insulating products for building applications - Determination of water vapour transmission properties (FOREIGN STANDARD)
DIN EN 12085:1997
Thermal insulating products for building applications - Determination of linear dimensions of test specimens (FOREIGN STANDARD)
DIN EN 12059:2008
Natural stone products - Dimensional stone work - Requirements; German version EN 12059:2008 (FOREIGN STANDARD)
DIN EN 12058:2005
Natural stone products - Slabs for floors and stairs - Requirements (FOREIGN STANDARD)
DIN EN 12057:2005
Natural stone products - Modular tiles - Requirements (FOREIGN STANDARD)
DIN EN 12056-5:2001
Gravity drainage systems inside buildings - Part 5: Installation and testing, instructions for operation, maintenance and user; English version of DIN EN 12056-5 (FOREIGN STANDARD)
DIN EN 12056-4:2001
Gravity drainage systems inside buildings - Part 4: Waste water lifting plants; Layout and calculation; English version of DIN EN 12056-4 (FOREIGN STANDARD)
DIN EN 12056-3:2001
Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation; English version of DIN EN 12056-3 (FOREIGN STANDARD)
DIN EN 12056-2:2001
Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation; English version of DIN EN 12056-2 (FOREIGN STANDARD)
DIN EN 12051:1999
Building hardware - Door and window bolts - Requirements and test methods (FOREIGN STANDARD)
DIN EN 12050-4:2001
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter; English version of DIN EN 12050-4 (FOREIGN STANDARD)
DIN EN 12050-3:2001
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications; English version of DIN EN 12050-3 (FOREIGN STANDARD)
DIN EN 12050-2:2001
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater; English version of DIN EN 12050-2 (FOREIGN STANDARD)
DIN EN 12050-1:2001
Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter; English version of DIN EN 12050-1 (FOREIGN STANDARD)
DIN EN 12046-2:2000
Operating forces - Test method - Part 2: Doors; English version of DIN EN 12046-2 (FOREIGN STANDARD)
DIN EN 12046-1:2004
Operating forces - Test method - Part 1: Windows (FOREIGN STANDARD)
DIN EN 12045:2000
Shutters and blinds, power-operated - Safety in use - Measurement of the transmitted force; English version of DIN EN 12045 (FOREIGN STANDARD)
DIN EN 12039:1999
Flexible sheets for waterproofing - Bitumen s for roof waterproofing - Determination of adhesion of granules (FOREIGN STANDARD)
DIN EN 12001:2004
Conveying, spraying and placing machines for concrete and mortar - Safety requirements (FOREIGN STANDARD)
DIN EN 1195:1998
Timber structures - Test methods - Performance of structural floor decking (FOREIGN STANDARD)
DIN EN 1192:2000
Doors - Classification of strength requirements; English version of DIN EN 1192 (FOREIGN STANDARD)
DIN EN 1191:2000
Windows and doors - Resistance to repeated opening and closing - Test method; English version of DIN EN 1191 (FOREIGN STANDARD)
DIN EN 1170-8:2009
Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test; German version EN 1170-8:2008 (Foreign Standard)
DIN EN 1170-7:1998
Precast concrete products - Test method for glass-fibre reinforced cement - Part 7: Measurement of extremes of dimensional variations due to moisture content (FOREIGN STANDARD)
DIN EN 1170-6:1998
Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density (FOREIGN STANDARD)
DIN EN 1170-5:1998
Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength by the 'complete bending test' method (FOREIGN STANDARD)
DIN EN 1170-4:1998
Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength by the 'Simplified bending test' method (FOREIGN STANDARD)
DIN EN 1170-3:1998
Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC (FOREIGN STANDARD)
DIN EN 1170-2:1998
Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC by the 'Wash out test' (FOREIGN STANDARD)
DIN EN 1170-1:1998
Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix by the 'Slump test' method (FOREIGN STANDARD)
DIN EN 1169:1999
Precast concrete products - General rules for factory production control of glass-fibre reinforced cement (FOREIGN STANDARD)
DIN EN 1168:2009
Precast concrete products - Hollow core slabs; German version EN 1168:2005+A2:2009 (Foreign Standard)
DIN EN 115-1:2009
Safety of escalators and moving walks - Part 1: Construction and installation; German version EN 115-1:2008 (Foreign Standard)
DIN EN 1148:1998
Water to water heat exchangers for district heating - Test procedures for establishing the performance data (FOREIGN STANDARD)
DIN EN 1148/A1:2005
Heat exchangers - Water to water heat exchangers for district heating - Test procedures for establishing the performance data (FOREIGN STANDARD)
DIN EN 1121:2000
Doors - Behaviour between two different climates - Test method; English version of DIN EN 1121 (FOREIGN STANDARD)
DIN EN 1112:2008
Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification; German version EN 1112:2008 (FOREIGN STANDARD)
DIN EN 1111:1998
Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification (FOREIGN STANDARD)
DIN EN 1110:1999
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow resistance at elevated temperature (FOREIGN STANDARD)
DIN EN 1109:1999
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature (FOREIGN STANDARD)
DIN EN 1108:1999
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes (FOREIGN STANDARD)
DIN EN 1107-2:2001
Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing; English version of DIN EN 1107-2 (FOREIGN STANDARD)
DIN EN 1107-1:1999
Flexible sheets for waterproofing - Determination of dimensional stability - Part 1: Bitumen sheets for roof waterproofing (FOREIGN STANDARD)
DIN EN 1097-9:2005
Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test (includes Amendment A1:2005) (FOREIGN STANDARD)
DIN EN 1097-8:2000
Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value (FOREIGN STANDARD)
DIN EN 1097-7:2008
Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German version EN 1097-7:2008 (FOREIGN STANDARD)
DIN EN 1097-6:2005
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption (FOREIGN STANDARD)
DIN EN 1097-5:2008
Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven; German version EN 1097-5:2008 (FOREIGN STANDARD)
DIN EN 1097-4:2008
Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler; German version EN 1097-4:2008 (FOREIGN STANDARD)
DIN EN 1097-3:1998
Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids (FOREIGN STANDARD)
DIN EN 1097-2:2006
Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation; German version EN 1097-2:1998 + A1:2006 (FOREIGN STANDARD)
DIN EN 1097-10:2003
Tests for mechanical and physical properties of aggregates - Part 10: Determination of the water suction height (FOREIGN STANDARD)
DIN EN 1090-3:2008
Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures; German version EN 1090-3:2008 (Foreign Standard)
DIN EN 1090-2:2008
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures; German version EN 1090-2:2008 (Foreign Standard)
DIN EN 1065:1998
Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests (FOREIGN STANDARD)
DIN EN 1054:1995
Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints (FOREIGN STANDARD)
DIN EN 1052-5:2005
Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method (FOREIGN STANDARD)
DIN EN 1052-4:2000
Methods of test for masonry - Part 4: Determination of shear strength including damp-proof course; English version of DIN EN 1052-4 (FOREIGN STANDARD)
DIN EN 1052-3:2007
Methods of test for masonry - Part 3: Determination of initial shear strength; German version EN 1052-3:2002 + A1:2007 (FOREIGN STANDARD)
DIN EN 1052-2:1999
Methods of test for masonry - Part 2: Determination of flexural strength (FOREIGN STANDARD)
DIN EN 1052-1:1998
Methods of test for masonry - Part 1: Determination of compressive strength (FOREIGN STANDARD)
DIN EN 1027:2000
Windows and doors - Watertightness - Test method; English version of DIN EN 1027 (FOREIGN STANDARD)
DIN EN 1026:2000
Windows and doors - Air permeability - Test method; English version of DIN EN 1026 (FOREIGN STANDARD)
DIN EN 1024:1997
Clay roofing tiles for discontinuous laying - Determination of geometric characteristics (FOREIGN STANDARD)
DIN EN 1015-9:2007
Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar; German version EN 1015-9:1999+A1:2006 (FOREIGN STANDARD)
DIN EN 1015-7:1998
Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar (FOREIGN STANDARD)
DIN EN 1015-6:2007
Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar; German version EN 1015-6:1998+A1:2006 (FOREIGN STANDARD)
DIN EN 1015-4:1998
Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration) (FOREIGN STANDARD)
DIN EN 1015-3:2007
Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table); German version EN 1015-3:1999+A1:2004+A2:2006 (FOREIGN STANDARD)
DIN EN 1015-21:2003
Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with substrates (FOREIGN STANDARD)
DIN EN 1015-2:2007
Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars; German version EN 1015-2:1998+A1:2006 (FOREIGN STANDARD)
DIN EN 1015-18:2003
Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar (FOREIGN STANDARD)
DIN EN 1015-17:2005
Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars (FOREIGN STANDARD)
DIN EN 1015-12:2000
Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates; English version of DIN EN 1015-12 (FOREIGN STANDARD)
DIN EN 1015-11:2007
Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar; German version EN 1015-11:1999+A1:2006 (FOREIGN STANDARD)
DIN EN 1015-10:2007
Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar; German version EN 1015-10:1999+A1:2006 (FOREIGN STANDARD)
DIN EN 1015-1:2007
Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis); German version EN 1015-1:1998+A1:2006 (FOREIGN STANDARD)
DIN EN 1008:2002
Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete (FOREIGN STANDARD)
DIN 7593:1981
Water fittings for domestic installation; Screwed unions with gasket for connection to copper tube on either side, designed for nominal pressure 10 (FOREIGN STANDARD)
DIN 7591:1981
Water fittings for domestic installation; Screwed unions with flat gasket for hose connection on either side, designed for nominal pressure 10 (FOREIGN STANDARD)
DIN 68800-2:1996
Wood preservation in building construction - Preventive structural measures (FOREIGN STANDARD)
DIN 68121-1:1993
Timber profiles for windows and window doors; dimensions, quality requirements (FOREIGN STANDARD)
DIN 52612-3:1979
Testing of Thermal Insulating Materials; Determination of Thermal Conductivity by the Guarded Hot Plate Apparatus; Thermal Resistance of Laminated Materials for Use in Building Practice (FOREIGN STANDARD)
DIN 52612-2:1984
Tesing of thermal insulating materials; determination of thermal conductivity by means of the guarded hot plate apparatus; conversion of the measured values for building applications (FOREIGN STANDARD)
DIN 52459:1981
Testing of building sealants; determination of the water absorption of backfill material; retentive capacity (FOREIGN STANDARD)
DIN 52455-3:1998
Determination of adhesion/cohesion of construction sealants after exposure to artificial light (FOREIGN STANDARD)
DIN 52455-1:2003
Determining the adhesion/cohesion of building sealants after conditioning in standard atmospheres, water or at elevated temperatures (FOREIGN STANDARD)
DIN 52452-2:1993
Testing of construction sealants for compatibility with chemicals (FOREIGN STANDARD)
DIN 52452-1:1989
Testing of building sealants for compatibility with construction materials (FOREIGN STANDARD)
DIN 52451-1:2007
Testing of sealing materials for buildings - Part 1: Determination of change in mass and volume of self-levelling joint sealants (Foreign Standard)
DIN 52450:1985
Testing of inorganic non-metallic building materials; determination of shrinkage and expansion on small specimens (FOREIGN STANDARD)
DIN 52274:1986
Testing of mineral fibre insulating materials; determination of interlaminar tensile strength perpendicular to plane of insulating layer (FOREIGN STANDARD)
DIN 52271:1981
Testing of mineral fibre insulating materials; Behaviour at elevated temperatures (FOREIGN STANDARD)
DIN 52252-2:1986
Testing the frost resistance of facing bricks and clinker blocks; freezing of bricks arranged in test blocks (FOREIGN STANDARD)
DIN 52252-1:1986
Testing the frost resistance of facing bricks and clinker blocks; freezing of single bricks on all sides (FOREIGN STANDARD)
DIN 52251-5:1987
Indirect methods of determining the frost resistance of roofing tiles; determination of drying shrinkage and firing shrinkage (FOREIGN STANDARD)
DIN 52251-3:1987
Indirect methods of determining the frost resistance of roofing tiles; determination of coefficient of impregnation (FOREIGN STANDARD)
DIN 52251-2:1987
Indirect methods of determining the frost resistance of roofing tiles; determination of water absorption (FOREIGN STANDARD)
DIN 52219:1993
On-site measurement of noise emitted by water supply and drainage systems (FOREIGN STANDARD)
DIN 52210-6:1989
Testing of acoustics in buildings; airborne impact and sound insulation; measurement of level difference (FOREIGN STANDARD)
DIN 52143:1985
Bitumen roofing felt with glass fleece base; terms and definitions, designation, requirements (FOREIGN STANDARD)
DIN 52132:1996
Polymeric bitumen roofing felt - Requirements and testing (FOREIGN STANDARD)
DIN 52128:1977
Bituminous Roof Sheeting with Felt Core; Definition, Designation, Requirements (FOREIGN STANDARD)
DIN 52123:1985
Testing of bitumen and polymer bitumen sheeting and felts (FOREIGN STANDARD)
DIN 52096:1987
Testing of fillers for road construction; testing the stiffening action of fillers on bitumen (FOREIGN STANDARD)
DIN 52024:2002
Distillation of petroleum-fluxed bitumen (FOREIGN STANDARD)
DIN 52005:2004
Bitumen and bituminous binders - Determination of ash (FOREIGN STANDARD)
DIN 51290-4:1991
Testing of polymer concrete for use in mechanical engineering - In-process testing and testing of components (FOREIGN STANDARD)
DIN 51290-3:1991
Testing of polymer concrete for use in mechanical engineering - Testing of specimens prepared in mould (FOREIGN STANDARD)
DIN 51290-2:1991
Testing of polymer concrete for use in mechanical engineering; testing of binders, fillers and ready-to-use mixtures (FOREIGN STANDARD)
DIN 51290-1:1991
Testing of polymer concrete for use in mechanical engineering; terminology (FOREIGN STANDARD)
DIN 51043:1979
Trass; Requirements, Tests (FOREIGN STANDARD)
DIN 5034-4:1994
Daylight in interiors - Part 4: Simplified method of determining window sizes in dwellings (FOREIGN STANDARD)
DIN 5034-2:1985
Daylight in interiors; principles (FOREIGN STANDARD)
DIN 5034-1:1999
Daylight in interiors - General requirements (FOREIGN STANDARD)
DIN 4753-6:1986
Water heating installations for drinking water and service water; cathodic corrosion protection of enamelled steel containers; requirements and testing (FOREIGN STANDARD)
DIN 4753-11:1990
Water heaters and hot water systems for drinking and service water; indirect heat exchangers; requirements, testing and marking (FOREIGN STANDARD)
DIN 43627-3:1998
Recessed house connection boxes for HRC fuses of size 00 rated for 100 A/500 V and size 1 rated for 250 A/500 V (FOREIGN STANDARD)
DIN 4235-5:1978
Compacting of Concrete by Vibrating; Compacting by Surface Vibrators (FOREIGN STANDARD)
DIN 4235-4:1978
Compacting of Concrete by Vibrating; Compacting of In-situ by Formwork Vibrators (FOREIGN STANDARD)
DIN 4235-3:1978
Compacting of Concrete by Vibrating; Compacting by External Vibrators during the Manufacture of Precast Components (FOREIGN STANDARD)
DIN 4235-2:1978
Compacting of Concrete by Vibrating; Compacting by Internal Vibrators (FOREIGN STANDARD)
DIN 4235-1:1978
Compacting of Concrete by Vibrating; Vibrators and Vibration Mechanics (FOREIGN STANDARD)
DIN 4226-100:2002
Aggregates for mortar and concrete - Part 100: Recycled aggregates (FOREIGN STANDARD)
DIN 4172:1955
Modular Co-ordination in Building Construction (FOREIGN STANDARD)
DIN 4166:1997
Autoclaved aerated concrete slabs and panels (FOREIGN STANDARD)
DIN 4160:2000
Non-loadbearing clay blocks for use in reinforced concrete ribbed and beam floors (FOREIGN STANDARD)
DIN 4159:1999
Loadbearing clay blocks for use in hollow pot and reinforced concrete ribbed floors, and wall panels (including Coorrigendum 1, Juni 2000) (FOREIGN STANDARD)
DIN 4158:1978
Filler concrete joists for reinforced and prestressed concrete floors (FOREIGN STANDARD)
DIN 4150-3:1999
Structural vibration - Effects of vibration on structures (FOREIGN STANDARD)
DIN 4150-1:2001
Structural vibration - Part 1: Prediction of vibration parameters (FOREIGN STANDARD)
DIN 4149:2005
Buildings in german earthquake areas - Design loads, analysis and structural design of buildings (FOREIGN STANDARD)
DIN 4141-3:1984
Structural bearings; bearing systems for buildings (FOREIGN STANDARD)
DIN 4141-2:1984
Structural bearings; bearing systems for civil engineering structures forming part of traffic routes (bridges) (FOREIGN STANDARD)
DIN 4123:2000
Excavations, foundations and underpinning work adjacent to existing buildings (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 4109:1989
Sound insulation in buildings; requirements and testing (FOREIGN STANDARD)
DIN 4103-4:1988
Internal non-loadbearing partitions; partitions with timber framing (FOREIGN STANDARD)
DIN 4103-2:1985
Internal non-loadbearing partitions; gypsum wallboard partitions (FOREIGN STANDARD)
DIN 4103-1:1984
Internal non-loadbearing partitions; requirements, testing (FOREIGN STANDARD)
DIN 3476:1996
Corrosion protection of water valves and pipe fittings by epoxy powder or liquid epoxy resin linings - Requirements and testing (FOREIGN STANDARD)
DIN 3475:1993
Spheroidal graphite cast iron valves and fittings provided with internal corrosion protection by means of enamelling, for use in drinking water supply systems; requirements and testing (FOREIGN STANDARD)
DIN 3230-4:1977
Technical Conditions of Delivery for Valves; Valves for Potable Water Service, Requirements and Testing (FOREIGN STANDARD)
DIN 276-1:2008
Building costs - Part 1: Building construction (Foreign Standard)
DIN 272:1986
Testing of magnesium oxychloride screeds (FOREIGN STANDARD)
DIN 24100-1:1978
Machines for the building and building material industries; mechanical comminution; concepts relating to materials processing (FOREIGN STANDARD)
DIN 1996-9:1981
Testing of Bituminous Materials for Road Building and Related Purposes; Swelling Test (FOREIGN STANDARD)
DIN 1996-6:1988
Testing of asphalt; determination of binder content and recovery of binder (FOREIGN STANDARD)
DIN 1996-4:1984
Testing of asphalt; moulding of specimens from bituminous mixtures (FOREIGN STANDARD)
DIN 1996-3:1990
Testing of asphalt; sample preparation (FOREIGN STANDARD)
DIN 1996-17:1990
Testing of asphalt; determination of dimensional stability when heated (Nuessel deformation index) (FOREIGN STANDARD)
DIN 1996-14:1990
Testing of asphalt; determination of grading of mineral aggregate recovered from asphalt (FOREIGN STANDARD)
DIN 1996-13:1984
Testing of asphalt; indentation testing using a flat-ended indentor pin (FOREIGN STANDARD)
DIN 1986-4:2003
Site drainage systems - Part 4: Use of sewer pipes and fittings made of different materials (FOREIGN STANDARD)
DIN 1961:2006
German construction contract procedures - Part B: General conditions of contract relating to the execution of building works (FOREIGN STANDARD)
DIN 1960:2006
Contract procedures for building works - Part A: General directions of contract letting for building works (FOREIGN STANDARD)
DIN 1946-4:2008
Ventilation and air conditioning - Part 4: Ventilation in buildings and rooms of health care (Foreign Standard)
DIN 18889:1956
Coal-fired Water-heater with Storage Boiler, without Pressure for Test Pressure of 1 Atmosphere; Terms employed, Construction, Quality, Capacity and Testing (FOREIGN STANDARD)
DIN 18808:1984
Steel structures; structures made from hollow sections subjected to predominantly static loading (FOREIGN STANDARD)
DIN 18807-8:1995
Trapezoidal aluminium sheeting and connections in building - Analysis at ultimate and serviceability limit states (FOREIGN STANDARD)
DIN 18807-7:1995
Trapezoidal aluminium sheeting and connections in building - Determination of loadbearing capacity by testing (FOREIGN STANDARD)
DIN 18807-6:1995
Trapezoidal aluminium sheeting and connections in building - Part 6: Determination of loadbearing capacity by calculation (FOREIGN STANDARD)
DIN 18807-3:1987
Trapezoidal sheeting in building; trapezoidal steel sheeting; structural analysis and design (FOREIGN STANDARD)
DIN 18807-2:1987
Trapezoidal sheeting in building; trapezoidal steel sheeting; determination of loadbearing capacity by testing (FOREIGN STANDARD)
DIN 18807-1:1987
Trapezoidal sheeting in building; trapezoidal steel sheeting; general requirements and determination of loadbearing capacity by calculation (FOREIGN STANDARD)
DIN 18801:1983
Structural steel in building; design and construction (FOREIGN STANDARD)
DIN 18650-2:2005
Building hardware - Powered pedestrian doors - Part 2: Safety at powered pedestrian doors (FOREIGN STANDARD)
DIN 18650-1:2005
Building hardware - Powered pedestrian doors - Part 1: Product requirements and test methods (FOREIGN STANDARD)
DIN 18560-7:2004
Floor screeds - Part 7: Heavy-duty screeds (industrial screeds) (FOREIGN STANDARD)
DIN 18560-4:2004
Floor screeds - Part 4: Screeds laid on separated layer (FOREIGN STANDARD)
DIN 18560-3:2006
Floor screeds in building construction - Part 3: Base-bonded floor screeds (FOREIGN STANDARD)
DIN 18560-2:2004
Floor screeds in building construction - Part 2: Floor screeds and heating floor screeds on insulation layers (FOREIGN STANDARD)
DIN 18560-1:2004
Floor screeds in building construction - Part 1: General requirements, testing and construction (FOREIGN STANDARD)
DIN 18558:1985
Synthetic resin plasters; terminology, requirements, application (FOREIGN STANDARD)
DIN 18556:1985
Testing of coating material for synthetic resin plasters and of synthetic resin plasters (FOREIGN STANDARD)
DIN 18555-9:1999
Testing of mortars containing mineral binders - Part 9: Determination the compressive strength of hardened mortar (FOREIGN STANDARD)
DIN 18555-7:1987
Testing of mortars containing mineral binders; determination of water retentivity of freshly mixed mortar by the filter plate method (FOREIGN STANDARD)
DIN 18555-6:1987
Testing of mortars containing mineral binders; determination of bond strength of hardened mortar (FOREIGN STANDARD)
DIN 18555-4:1986
Testing of mortars containing mineral binders; hardened mortars; determination of linear and transverse strain and of deformation characteristics of masonry mortars by the static pressure test (FOREIGN STANDARD)
DIN 18555-3:1982
Testing of mortars containing mineral binders; hardened mortars; determination of flexural strength, compressive strength and bulk density (FOREIGN STANDARD)
DIN 18554-1:1985
Testing of masonry; determination of compressive strenght and of elastic modulus (FOREIGN STANDARD)
DIN 18545-3:1992
Glazing with sealants; rebates; glazing systems (FOREIGN STANDARD)
DIN 18545-1:1992
Glazing with sealants; rebates; requirements (FOREIGN STANDARD)
DIN 18530:1987
Solid structural decks for roofs; design and construction (FOREIGN STANDARD)
DIN 18516-4:1990
Back-ventilated, non-loadbearing, external enclosures of buildings, made from tempered safety glass panels - Requirements and testing (FOREIGN STANDARD)
DIN 18515-2:1993
Design and installation of masonry cladding on supports (FOREIGN STANDARD)
DIN 18515-1:1998
Design and installation of tile or stone cladding (FOREIGN STANDARD)
DIN 18459:2006
German construction contract procedures - Part C: General technical specifications for building works - Demolition and deconstruction works (FOREIGN STANDARD)
DIN 18451:2006
German construction contract procedures - Part C: General technical specifications for building works - Scaffolding works (FOREIGN STANDARD)
DIN 18421:2006
German construction contract procedures - Part C: General technical specifications for building works - Insulation works on technical installations (FOREIGN STANDARD)
DIN 18386:2006
German construction contract procedures - Part C: General technical specifications for building works - Automation installations in buildings (FOREIGN STANDARD)
DIN 18385:2002
Construction contract procedures (VOB) - Part C: General technical specifications construction contracts (ATV); Installation of lifts, escalators, passenger conveyors and materials handling equipment (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 18384:2000
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Installation of lightning protection systems (FOREIGN STANDARD)
DIN 18382:2002
Construction contract procedures (VOB) - Part C: General technical specifications construction contracts (ATV); Electrical supply systems rated for voltages up to 36 kV (FOREIGN STANDARD)
DIN 18381:2006
German construction contract procedures - Part C: General technical specifications for building works - Gas, water and sewage plumbing works inside of buildings (FOREIGN STANDARD)
DIN 18380:2006
German construction contract procedures - Part C: General technical specifications for building works - Systems for heating and central water heating (FOREIGN STANDARD)
DIN 18379:2006
German construction contract procedures - Part C: General technical specifications for building works - Room ventilation systems (FOREIGN STANDARD)
DIN 18367:2002
Constructin contract procedures (VOB) - Part C: General technical specifications construction contracts (ATV); Laying of wood block flooring (FOREIGN STANDARD)
DIN 18366:2006
German construction contract procedures - Part C: General technical specifications for building works - Wall paper hanging (FOREIGN STANDARD)
DIN 18365:2006
German construction contract procedures - Part C: General technical specifications for building works - Flooring works (FOREIGN STANDARD)
DIN 18364:2006
German construction contract procedures - Part C: General technical specifications for building works - Works for protection of steel structures (FOREIGN STANDARD)
DIN 18363:2006
German construction contract procedures - Part C: General technical specifications for building works - Painting - coatings works (FOREIGN STANDARD)
DIN 18361:2002
Contuction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Glazing (FOREIGN STANDARD)
DIN 18360:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Metalwork (FOREIGN STANDARD)
DIN 18358:2006
German construction contract procedures - Part C: General technical specifications for building works - Rolling shutters works (FOREIGN STANDARD)
DIN 18357:2006
German construction contract procedures - Part C: General technical specifications for building works - Mounting of window and door fittings (FOREIGN STANDARD)
DIN 18356:2006
German construction contract procedures - Part C: General technical specifications for building works - Parquet works (FOREIGN STANDARD)
DIN 18355:2006
German construction contract procedures - Part C: General technical specifications for building works - Joinery works (FOREIGN STANDARD)
DIN 18354:2006
German construction contract procedures - Part C: General technical specifications for building works - Asphalt flooring works (FOREIGN STANDARD)
DIN 18353:2006
German construction contract procedures - Part C: General technical specifications for building works - Floor screed works (FOREIGN STANDARD)
DIN 18352:2006
German construction contract procedures - Part C: General technical specifications for building works - Tile laying works (FOREIGN STANDARD)
DIN 18351:2006
German construction contract procedures - Part C: General technical specifications for building works - Ventilated curtain walling (FOREIGN STANDARD)
DIN 18350:2006
German construction contract procedures - Part C: General technical specifications for building works - Plaster and stucco works (FOREIGN STANDARD)
DIN 18349:2006
German construction contract procedures - Part C: General technical specifications for building works - Concrete maintenance works (FOREIGN STANDARD)
DIN 18345:2006
German construction contract procedures - Part C: General technical specifications for building works - Thermal insulation composite system (FOREIGN STANDARD)
DIN 18340:2006
German construction contract procedures - Part C: General technical specifications for building works - Dry construction works (FOREIGN STANDARD)
DIN 18339:2002
Construction contract procedures (VOB) C: General technical specifications in construction contracts (ATV); Sheet metal roofing and wall covering work (FOREIGN STANDARD)
DIN 18338:2006
German construction contract procedures - Part C: General technical specifications for building works - Roof covering and roof sealing works (FOREIGN STANDARD)
DIN 18336:2002
Construction contract procedures (VOB) - Part C: General technical specifications fin construction contracts (ATV); Waterproofing (FOREIGN STANDARD)
DIN 18335:2002
Construction contract procedures (VOB) C: General technical specifications in construction contracts (ATV); Structural steelwork (FOREIGN STANDARD)
DIN 18334:2006
German construction contract procedures - Part C: General technical specifications for building works - Carpentry and timber construction works (FOREIGN STANDARD)
DIN 18333:2000
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Cast stone work (FOREIGN STANDARD)
DIN 18332:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction conracts (ATV); Natural stone work (FOREIGN STANDARD)
DIN 18331:2006
German construction contract procedures - Part C: General technical specifications for building works - Concrete works (FOREIGN STANDARD)
DIN 18330:2006
German construction contract procedures - Part C: General technical specifications for building works - Masonry work (FOREIGN STANDARD)
DIN 18325:2002
Construction Contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Track construction (FOREIGN STANDARD)
DIN 18322:2006
German construction contract procedures - Part C: General technical specifications for building works - Cable laying works (FOREIGN STANDARD)
DIN 18321:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Jet grouting works (FOREIGN STANDARD)
DIN 18320:2006
German construction contract procedures - Part C: General technical specifications for building works - Landscaping works (FOREIGN STANDARD)
DIN 18319:2000
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Trenchless pipelaying (FOREIGN STANDARD)
DIN 18318:2006
German construction contract procedures - Part C: General technical specifications for building works - Construction works for traffic lines - Stone and tile pavements without binders, kerbs (FOREIGN STANDARD)
DIN 18317:2006
German construction contract procedures - Part C: General technical specifications for building works - Construction works for traffic lines - top layers of asphalt (FOREIGN STANDARD)
DIN 18316:2006
German construction contract procedures - Part C: General technical specifications for building works - Construction works for traffic lines - top layers with hydraulic binders (FOREIGN STANDARD)
DIN 18315:2006
German construction contract procedures - Part C: General technical specifications for building works - Construction works for traffic lines - top layers without binders (FOREIGN STANDARD)
DIN 18314:2006
German construction contract procedures - Part C: General technical specifications for building works - Air-placed concrete works (FOREIGN STANDARD)
DIN 18313:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction conracts (ATV); Diaphragm walling (FOREIGN STANDARD)
DIN 18312:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction conracts (ATV); Underground construction work (FOREIGN STANDARD)
DIN 18311:2006
German construction contract procedures - Part C: General technical specifications for building works - Dredging work (FOREIGN STANDARD)
DIN 18310:2000
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Revetment work (FOREIGN STANDARD)
DIN 18309:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction conracts (ATV); Ground treatment by grouting (FOREIGN STANDARD)
DIN 18308:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction conracts (ATV); Land drainage (FOREIGN STANDARD)
DIN 18307:2006
German construction contract procedures - Part C: General technical specifications for building works - Works for pressure pipe lines in the ground (FOREIGN STANDARD)
DIN 18306:2000
Construction contract procedures (VOB) - Part C: General technical specifications in contruction contracts (ATV); Underground drainage (FOREIGN STANDARD)
DIN 18305:2000
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Groundwater lowering (FOREIGN STANDARD)
DIN 18304:2000
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Piling (FOREIGN STANDARD)
DIN 18303:2002
Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV); Timbering to trenchwork (FOREIGN STANDARD)
DIN 18302:2006
German construction contract procedures - Part C: General technical specifications for building works - Borehole extension works (FOREIGN STANDARD)
DIN 18301:2006
German construction contract procedures - Part C: General technical specifications for building works - Drilling works (FOREIGN STANDARD)
DIN 18300:2006
German construction contract procedures - Part C: General technical specifications for building works - Earthworks (FOREIGN STANDARD)
DIN 18299:2006
German construction contract procedures - Part C: General technical specifications for building works - General rules for all kinds of building works (FOREIGN STANDARD)
DIN 18262:1969
Adjustable Non-load-bearing Spring Hinge for Fire Protecting Doors (FOREIGN STANDARD)
DIN 18217:1981
Concrete surfaces and formwork surface (FOREIGN STANDARD)
DIN 18216:1986
Formwork ties; requirements, testing, use (FOREIGN STANDARD)
DIN 18205:1996
Brief for building design (FOREIGN STANDARD)
DIN 18203-3:2008
Tolerances in building constructions - Part 3: Building components of wood and derived timber products (Foreign Standard)
DIN 18203-1:1997
Tolerances for building - Part 1: Precast ordinary, reinforced and prestressed concrete components (FOREIGN STANDARD)
DIN 18202:2005
Tolerances in building construction - Buildings (FOREIGN STANDARD)
DIN 18200:2000
Conformity assessment of construction products - Factory production control, third-party inspection, and certification (FOREIGN STANDARD)
DIN 18192:1985
Bonded polyester fleece used as an inlay for bitumen and polymer bitumen sheeting; concept, designation, requirements, testing (FOREIGN STANDARD)
DIN 18182-4:1987
Accessories for the installation of gypsum plasterboard; nails (FOREIGN STANDARD)
DIN 18162:2000
Solid lightweight concrete blocks for walls (FOREIGN STANDARD)
DIN 18159-1:1991
Polyurethane (PUR) foam thermal insulating material applied in situ - Applications, requirements, workmanship and testing (FOREIGN STANDARD)
DIN 18158:1986
Clinker floor tiles (FOREIGN STANDARD)
DIN 18157-2:1982
Application of ceramic tiling using the thin-bed method; dispersion adhesives (FOREIGN STANDARD)
DIN 18148:2000
Hollow lightweight concrete concrete blocks for walls (FOREIGN STANDARD)
DIN 18100:1983
Doors; wall openings for doors with dimensions in accordance with DIN 4172 (FOREIGN STANDARD)
DIN 18095-3:1999
Smoke control door and shutter assemblies - Part 3: Application of test results (FOREIGN STANDARD)
DIN 18095-2:1991
Smoke control doors; type testing for durability and leakage (FOREIGN STANDARD)
DIN 18095-1:1988
Smoke control doors; concepts and requirements (FOREIGN STANDARD)
DIN 1164-12:2005
Special cement - Part 12: Composition, specification and conformity evaluation for cement with higher quantity of organic constituents (Foreign Standard)
DIN 1164-11:2003
Special cement - Part 11: Composition, specification and conformity evaluation for cement with short setting time (FOREIGN STANDARD)
DIN 1164-10:2004
Special cement - Part 10: Composition, requirements and conformity evaluation for special common cement (FOREIGN STANDARD)
DIN 1100:2004
Hard aggregates for cement-bound floor screeds - Requirements and test methods (FOREIGN STANDARD)
DIN 1057-1:1985
Building materials for free-standing chimneys; compass bricks; requirements, testing, inspection (FOREIGN STANDARD)
DIN 1055-2:1976
Design Loads for Buildings; Soil Characteristics; Specific Weight, Angle of Friction, Cohesion, Angle of Wall Friction (FOREIGN STANDARD)
DIN 105-5:1984
Clay bricks; lightweight horizontally perforated bricks and lightweight horizontally perforated brick panels (FOREIGN STANDARD)
DIN 1053-3:1990
Reinforced masonry; design and construction (FOREIGN STANDARD)
DIN 1053-2:1996
Masonry - Masonry strength classification on the basis of suitability testing (FOREIGN STANDARD)
DIN 1053-1:1996
Masonry - Design and construction (FOREIGN STANDARD)
DIN 1048-5:1991
Testing concrete; testing of hardened concrete (specimens prepared in mould) (FOREIGN STANDARD)
DIN 1048-2:1991
Testing concrete; testing of hardened concrete (specimens taken in situ) (FOREIGN STANDARD)
DIN 1048-1:1991
Testing concrete; testing of fresh concrete (FOREIGN STANDARD)
DIN 1045-4:2001
Plain, reinforced and prestressed concrete structures - Part 4: Supplementary specifications governing the production and conformity of precast concrete elements (FOREIGN STANDARD)
DIN 1045-3:2008
Concrete, reinforced and prestressed concrete structures - Part 3: Execution of structures (Foreign Standard)
DIN 1045-2:2008
Concrete, reinforced and prestressed concrete structures - Part 2: Concrete - Specification, properties, production and conformity - Application rules for DIN EN 206-1 (Foreign Standard)
DIN 1045-1:2008
Concrete, reinforced and prestressed concrete structures - Part 1: Design and construction (Foreign Standard)
DIN Standards : DIN ICS 91 Construction Materials and Building(Page 3)
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
