DIN Standards : DIN ICS 91 Construction Materials and Building(Page 2)
DIN EN 1462:2004
Brackets for eaves gutters - Requirements and testing (FOREIGN STANDARD)
DIN EN 14618:2005
Agglomerated stone - Terminology and classification (FOREIGN STANDARD)
DIN EN 14617-9:2005
Agglomerated stone - Test methods - Part 9: Determination of impact resistance (FOREIGN STANDARD)
DIN EN 14617-8:2008
Agglomerated stone - Test methods - Part 8: Determination of resistance to fixing (dowel hole); German version EN 14617-8:2007 (FOREIGN STANDARD)
DIN EN 14617-6:2005
Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance (FOREIGN STANDARD)
DIN EN 14617-5:2005
Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance (FOREIGN STANDARD)
DIN EN 14617-4:2005
Agglomerated stone - Test methods - Part 4: Determination of the abrasion resistance (FOREIGN STANDARD)
DIN EN 14617-2:2008
Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German version EN 14617-2:2008 (Foreign Standard)
DIN EN 14617-16:2005
Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles (FOREIGN STANDARD)
DIN EN 14617-15:2005
Agglomerated stone - Test methods - Part 15: Determination of compressive strength (FOREIGN STANDARD)
DIN EN 14617-13:2005
Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity (FOREIGN STANDARD)
DIN EN 14617-12:2005
Agglomerated stone - Test methods - Part 12: Determination of dimensional stability (FOREIGN STANDARD)
DIN EN 14617-11:2005
Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient (FOREIGN STANDARD)
DIN EN 14617-10:2005
Agglomerated stone - Test methods - Part 10: Determination of chemical resistance (FOREIGN STANDARD)
DIN EN 14617-1:2005
Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption (FOREIGN STANDARD)
DIN EN 14609:2004
Windows - Determination of the resistance to static torsion (FOREIGN STANDARD)
DIN EN 14608:2004
Windows - Determination of the resistance to racking (FOREIGN STANDARD)
DIN EN 14600:2006
Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification (FOREIGN STANDARD)
DIN EN 14528:2007
Bidets - Functional requirements and test methods; German version EN 14528:2007 (FOREIGN STANDARD)
DIN EN 14527:2006
Shower trays for domestic purposes; German version EN 14527:2006 (FOREIGN STANDARD)
DIN EN 14518:2005
Ventilation for buildings - Chilled beams - Testing and rating of passive chilled beams (FOREIGN STANDARD)
DIN EN 14516:2006
Baths for domestic purposes; German version EN 14516:2006 (FOREIGN STANDARD)
DIN EN 14511-4:2008
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Requirements; German version EN 14511-4:2007 (FOREIGN STANDARD)
DIN EN 14511-3 Berichtigung 1:2008
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods; German version EN 14511-3:2007, Corrigendum to DIN EN 14511-3:2008-02; German version EN 14511-3:2007/AC:2
DIN EN 14511-3:2008
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods; German version EN 14511-3:2007 (FOREIGN STANDARD)
DIN EN 14511-2:2008
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions; German version EN 14511-2:2007 (FOREIGN STANDARD)
DIN EN 14509:2007
Self-supporting double skin metal faced insulating panels - Factory made products - Specifications; German version EN 14509:2006 (FOREIGN STANDARD)
DIN EN 14501:2006
Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification (FOREIGN STANDARD)
DIN EN 14500:2008
Blinds and shutters - Thermal and visual comfort - Test and calculation methods; German version EN 14500:2008 (FOREIGN STANDARD)
DIN EN 14498:2004
Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles (FOREIGN STANDARD)
DIN EN 14497:2004
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability (FOREIGN STANDARD)
DIN EN 14496:2006
Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards - Definitions, requirements and test methods (FOREIGN STANDARD)
DIN EN 14488-7:2006
Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete; German version EN 14488-7:2006 (FOREIGN STANDARD)
DIN EN 14488-6:2006
Testing sprayed concrete - Part 6: Thickness of concrete on a substrate; German version EN 14488-6:2006 (FOREIGN STANDARD)
DIN EN 14488-5:2006
Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens; German version EN 14488-5:2006 (FOREIGN STANDARD)
DIN EN 14488-4:2008
Testing sprayed concrete - Part 4: Bond strength of cores by direct tension; German version EN 14488-4:2005+A1:2008 (FOREIGN STANDARD)
DIN EN 14488-3:2006
Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens; German version EN 14488-3:2006 (FOREIGN STANDARD)
DIN EN 14488-2:2006
Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete; German version EN 14488-2:2006 (FOREIGN STANDARD)
DIN EN 14488-1:2005
Testing sprayed concrete - Part 1: Sampling fresh and hardened concrete (FOREIGN STANDARD)
DIN EN 14487-2:2007
Sprayed concrete - Part 2: Execution; German version EN 14487-2:2006 (FOREIGN STANDARD)
DIN EN 14474:2005
Precast concrete products - Concrete with woodchips as aggregate - Requirements and test methods (FOREIGN STANDARD)
DIN EN 14471:2005
Chimneys - System chimneys with plastic flue liners - Requirements and test methods (FOREIGN STANDARD)
DIN EN 14459 Berichtigung 1:2009
Control functions in electronic systems for gas burners and gas burning appliances - Methods for classification and assessment; German version EN 14459:2007, Corrigendum to DIN EN 14459:2008-02; German version EN 14459:2007/AC:2008 (Foreign Standard)
DIN EN 14459:2008
Control functions in electronic systems for gas burners and gas burning appliances - Methods for classification and assessment; German version EN 14459:2007 (FOREIGN STANDARD)
DIN EN 14437:2005
Determination of the uplift resistance of installed clay or concrete tiles for roofing - Roof system test method (FOREIGN STANDARD)
DIN EN 14411:2007
Ceramic tiles - Definitions, classification, characteristics and marking; German version EN 14411:2006 (FOREIGN STANDARD)
DIN EN 14406:2004
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution (FOREIGN STANDARD)
DIN EN 14394:2008
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 ?C; German version EN 14394:2005+A1:2008 (Foreign Standard)
DIN EN 14367:2005
Non controllable backflow preventer with different pressure zones - Family C, type A (FOREIGN STANDARD)
DIN EN 14353:2008
Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods; German version EN 14353:2007 (FOREIGN STANDARD)
DIN EN 14351-1:2006
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics; German version EN 14351-1:2006 (FOREIGN STANDARD)
DIN EN 14337:2006
Heating systems in buildings - Design and installation of direct electrical room heating systems (FOREIGN STANDARD)
DIN EN 14336:2005
Heating systems in buildings - Installation and commissioning of water based heating systems (FOREIGN STANDARD)
DIN EN 14317-2:2007
Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products; German version EN 14317-2:2007 (FOREIGN STANDARD)
DIN EN 14317-1:2004
Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation (FOREIGN STANDARD)
DIN EN 14316-2:2007
Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products; German version EN 14316-2:2007 (FOREIGN STANDARD)
DIN EN 14316-1:2004
Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation (FOREIGN STANDARD)
DIN EN 14297:2004
Chimneys - Freeze-thaw resistance test method for chimney products (FOREIGN STANDARD)
DIN EN 14296:2005
Sanitary appliances - Communal washing troughs (FOREIGN STANDARD)
DIN EN 14277:2006
Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes; German version EN 14277:2006 (FOREIGN STANDARD)
DIN EN 14250:2005
Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners (FOREIGN STANDARD)
DIN EN 14240:2004
Ventilation for buildings - Chilled ceilings - Testing and rating (FOREIGN STANDARD)
DIN EN 14239:2004
Ventilation for buildings - Ductwork - Measurement of ductwork surface area (FOREIGN STANDARD)
DIN EN 14236:2008
Ultrasonic domestic gas meters; German version EN 14236:2007 (FOREIGN STANDARD)
DIN EN 14224:2006
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of crack bridging ability (FOREIGN STANDARD)
DIN EN 14223:2006
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption (FOREIGN STANDARD)
DIN EN 14216:2004
Cement - Composition, specifications and conformity criteria for very low heat special cements (FOREIGN STANDARD)
DIN EN 14209:2006
Preformed plasterboard cornices - Definitions, requirements and test methods (FOREIGN STANDARD)
DIN EN 14203:2004
Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods (FOREIGN STANDARD)
DIN EN 14202:2004
Blinds and shutters - Suitability for use of tubular and square motorizations - Requirements and test methods (FOREIGN STANDARD)
DIN EN 14201:2004
Blinds and shutters - Resistance to repeated operations (mechanical endurance) - Methods of testing (FOREIGN STANDARD)
DIN EN 14154-3:2007
Water meters - Part 3: Test methods and equipment; German version EN 14154-3:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 14154-2:2007
Water meters - Part 2: Installation and conditions of use; German version EN 14154-2:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 14154-1:2007
Water meters - Part 1: General requirements; German version EN 14154-1:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 14134:2004
Ventilation for buildings - Performance testing and installation checks of residential ventilation systems (FOREIGN STANDARD)
DIN EN 14124:2005
Inlet valves for flushing cisterns with internal overflow (FOREIGN STANDARD)
DIN EN 14117:2004
Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products (FOREIGN STANDARD)
DIN EN 14114:2002
Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems (FOREIGN STANDARD)
DIN EN 14068:2004
Products and systems for the protection and repair of concrete structures - Test methods - Determination of water tightness of injected cracks without movement in concrete (FOREIGN STANDARD)
DIN EN 14063-1:2004
Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation (FOREIGN STANDARD)
DIN EN 14037-3:2003
Ceiling-mounted radiant panels supplied with water at a temperature below 120 ?C - Part 3: Rating method and evaluation radiant thermal output (FOREIGN STANDARD)
DIN EN 14037-2:2003
Ceiling-mounted radiant panels supplied with water at a temperature below 120 ?C - Part 2: Test method for thermal output (FOREIGN STANDARD)
DIN EN 14024:2005
Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment (FOREIGN STANDARD)
DIN EN 14019:2004
Curtain Walling - Impact resistance - Performance requirements (FOREIGN STANDARD)
DIN EN 14016-2:2004
Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods (FOREIGN STANDARD)
DIN EN 13978-1:2005
Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions (FOREIGN STANDARD)
DIN EN 13964:2007
Suspended ceilings - Requirements and test methods; German version EN 13964:2004 + A1:2006 (FOREIGN STANDARD)
DIN EN 13963 Berichtigung 1:2006
Jointing materials for gypsum plasterboards - Definitions, requirements and test methods; German version EN 13963:2005, Corrigenda to DIN EN 13963:2005-08; German version EN 13963:2005/AC:2006 (FOREIGN STANDARD)
DIN EN 13963:2005
Jointing materials for gypsum plasterboards - Definitions, requirements and test methods (FOREIGN STANDARD)
DIN EN 13950:2006
Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods (FOREIGN STANDARD)
DIN EN 13948:2008
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to root penetration; German version EN 13948:2007 (FOREIGN STANDARD)
DIN EN 13947:2007
Thermal performance of curtain walling - Calculation of thermal transmittance; German version EN 13947:2006 (FOREIGN STANDARD)
DIN EN 13941:2009
Design and installation of preinsulated bonded pipe systems for district heating; German and English version prEN 13941:2009 (Foreign Standard)
DIN EN 13941:2003
Design and installation of preinsulated bonded pipe systems for district heating (FOREIGN STANDARD)
DIN EN 13914-2:2005
Design, preparation and application of external rendering and internal plastering - Part 2: Design considerations and essential principles for internal plastering (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 13914-1:2005
Design, preparation and application of external rendering and internal plastering - Part 1: External rendering (FOREIGN STANDARD)
DIN EN 13897:2005
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness after stretching at low temperature (FOREIGN STANDARD)
DIN EN 13894-2:2003
Products and systems for the protection and repair of concrete structures - Test methods; Determination of fatigue under dynamic loading - Part 2: After hardening (FOREIGN STANDARD)
DIN EN 13894-1:2004
Products and systems for the protection and repair of concrete structures - Test methods; Determination of fatigue under dynamic loading - Part 1: During cure (FOREIGN STANDARD)
DIN EN 13892-8:2003
Methods of test for screed materials - Part 8: Determination of bond strength (FOREIGN STANDARD)
DIN EN 13892-7:2003
Methods of test for screed materials - Part 7: Determination of wear resistance to rolling wheel of screed material with floor coverings (FOREIGN STANDARD)
DIN EN 13892-6:2003
Methods of test for screed materials - Part 6: Determination of surface hardness (FOREIGN STANDARD)
DIN EN 13892-5:2003
Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer (FOREIGN STANDARD)
DIN EN 13892-4:2003
Methods of test for screed materials - Part 4: Determination of wear resistance-BCA (FOREIGN STANDARD)
DIN EN 13892-3:2004
Methods of test for screed materials - Part 3: Determination of wear resistance (Boehme) (FOREIGN STANDARD)
DIN EN 13892-2:2003
Methods of test for screed materials - Part 2: Determination of flexural and compressive strength (FOREIGN STANDARD)
DIN EN 13892-1:2003
Methods of test for screed materials - Part 1: Sampling, making and curing specimens for testing (FOREIGN STANDARD)
DIN EN 13872 Berichtigung 1:2004
Corrigenda to DIN EN 13872:2004-04 (FOREIGN STANDARD)
DIN EN 13872:2004
Method of test for smoothing and/or levelling compounds - Determination of shrinkage (FOREIGN STANDARD)
DIN EN 13862:2002
Floor cutting-off machines - Safety; English version of DIN EN 13862 (FOREIGN STANDARD)
DIN EN 13859-2:2009
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls; German version EN 13859-2:2004+A1:2008 (Foreign Standard)
DIN EN 13859-1:2009
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing; German version EN 13859-1:2005+A1:2008 (Foreign Standard)
DIN EN 13836:2007
Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW; German version EN 13836:2006 (FOREIGN STANDARD)
DIN EN 13831:2007
Closed expansion vessels with built in diaphragm for installation in water; German version EN 13831:2007 (FOREIGN STANDARD)
DIN EN 13830:2003
Curtain walling - Product standard (FOREIGN STANDARD)
DIN EN 1383:2000
Timber structures - Test methods - Pull-through resistance of timber fasteners; English version of DIN EN 1383 (FOREIGN STANDARD)
DIN EN 13829:2001
Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method (ISO 9972:1996, modified); English version of DIN EN 13829 (FOREIGN STANDARD)
DIN EN 13820:2003
Thermal insulating materials for building applications - Determination of organic content (FOREIGN STANDARD)
DIN EN 1382:2000
Timber structures - Test methods - Withdrawal capacity of timber fasteners; English version of DIN EN 1382 (FOREIGN STANDARD)
DIN EN 13815:2006
Fibrous gypsum plaster casts - Definitions, requirements and test methods; German version EN 13815:2006 (FOREIGN STANDARD)
DIN EN 13814:2005
Fairground and amusement park machinery and structures - Safety (FOREIGN STANDARD)
DIN EN 13813:2003
Screed material and floor screeds - Screed materials - Properties and requirements (FOREIGN STANDARD)
DIN EN 1381:2000
Timber structures - Test methods - Loadbearing stapled joints; English version of DIN EN 1381 (FOREIGN STANDARD)
DIN EN 13808:2005
Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1380:2009
Timber structures - Test methods - Load bearing nails, screws, dowels and bolts; German version EN 1380:2009 (Foreign Standard)
DIN EN 13793:2003
Thermal insulating products for building applications - Determination of behaviour under cyclic loading (FOREIGN STANDARD)
DIN EN 13791:2008
Assessment of in-situ compressive strength in structures and precast concrete components; German version EN 13791:2007 (FOREIGN STANDARD)
DIN EN 13782:2006
Temporary structures - Tents - Safety; German version EN 13782:2005 (FOREIGN STANDARD)
DIN EN 13779:2007
Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems; German version EN 13779:2007 (FOREIGN STANDARD)
DIN EN 13748-2:2005
Terrazzo tiles - Part 2: Terrazzo tiles for external use (FOREIGN STANDARD)
DIN EN 13748-1:2005
Terrazzo tiles - Part 1: Terrazzo tiles for internal use (FOREIGN STANDARD)
DIN EN 13747:2009
Precast concrete products - Floor plates for floor systems; German version EN 13747:2005+A1:2008 (Foreign Standard)
DIN EN 13703:2004
Bitumen and bituminous binders - Determination of deformation energy (FOREIGN STANDARD)
DIN EN 13702-2:2004
Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Part 2: Coaxial cylinders method (FOREIGN STANDARD)
DIN EN 13702-1:2004
Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Part 1: Cone and plate method (FOREIGN STANDARD)
DIN EN 13693:2004
Precast concrete products - Special roof elements (FOREIGN STANDARD)
DIN EN 13687-5:2002
Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 5: Resistance to temperature shock (FOREIGN STANDARD)
DIN EN 13687-4:2002
Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 4: Dry thermal cycling (FOREIGN STANDARD)
DIN EN 13687-3:2002
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact (FOREIGN STANDARD)
DIN EN 13687-2:2002
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock) (FOREIGN STANDARD)
DIN EN 13687-1:2002
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion (FOREIGN STANDARD)
DIN EN 1367-6:2008
Tests for thermal and weathering properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl); German version EN 1367-6:2008 (Foreign Standard)
DIN EN 1367-5:2002
Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock (FOREIGN STANDARD)
DIN EN 1367-4:2008
Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage; German version EN 1367-4:2008 (FOREIGN STANDARD)
DIN EN 1367-3:2001
Tests for thermal and weathering properties of aggregates - Part 3: Boiling test for "Sonnenbrand basalt"; English version of DIN EN 1367-3 (FOREIGN STANDARD)
DIN EN 1367-2:1998
Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test (FOREIGN STANDARD)
DIN EN 1367-1:2007
Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing; German version EN 1367-1:2007 (FOREIGN STANDARD)
DIN EN 13659:2009
Shutters - Performance requirements including safety; German version EN 13659:2004+A1:2008 (Foreign Standard)
DIN EN 13653:2004
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of shear strength (FOREIGN STANDARD)
DIN EN 13639 Berichtigung 1:2006
Determination of total organic carbon in limestone; German version EN 13639:2002, Corrigenda to DIN EN 13639:2002-07; German version EN 13639:2002/AC:2004 (FOREIGN STANDARD)
DIN EN 13639:2002
Determination of total organic carbon in limestone (FOREIGN STANDARD)
DIN EN 1359:2007
Gas meters - Diaphragm meters; German version EN 1359:1998 + A1:2006 (FOREIGN STANDARD)
DIN EN 13589:2008
Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method; German version EN 13589:2008 (FOREIGN STANDARD)
DIN EN 13588:2008
Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test; German version EN 13588:2008 (Foreign Standard)
DIN EN 13584:2003
Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products (FOREIGN STANDARD)
DIN EN 13583:2001
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance; English version of DIN EN 13583 (FOREIGN STANDARD)
DIN EN 13581:2002
Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress (FOREIGN STANDARD)
DIN EN 13580:2002
Products and systems for the protection and repair of concrete structures - Test methods - Water absorption and resistance to alkali for hydrophobic impregnations (FOREIGN STANDARD)
DIN EN 13579:2002
Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation (FOREIGN STANDARD)
DIN EN 13578:2004
Products and systems for the protection and repair of concrete structure - Test method - Compatibility on wet concrete (FOREIGN STANDARD)
DIN EN 13564-3:2004
Anti-flooding devices for buildings - Part 3: Quality assurance (FOREIGN STANDARD)
DIN EN 13564-2:2003
Anti-flooding devices for buildings - Part 2: Test methods (FOREIGN STANDARD)
DIN EN 13564-1:2002
Anti-flooding devices for buildings - Part 1: Requirements (FOREIGN STANDARD)
DIN EN 13561:2009
External blinds - Performance requirements including safety; German version EN 13561:2004+A1:2008 (Foreign Standard)
DIN EN 1356:1997
Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load (FOREIGN STANDARD)
DIN EN 13559:2003
Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes (FOREIGN STANDARD)
DIN EN 13558:2003
Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes (FOREIGN STANDARD)
DIN EN 1355:1997
Determination of creep strain under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 1354:2005
Determination of compressive strength of lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 1353:1997
Determination of moisture content of autoclaved aerated concrete (FOREIGN STANDARD)
DIN EN 13529:2003
Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack (FOREIGN STANDARD)
DIN EN 13527:2001
Shutters and blinds - Measurement of operating force - Test methods; English version of DIN EN 13527 (FOREIGN STANDARD)
DIN EN 1352:1997
Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure (FOREIGN STANDARD)
DIN EN 1351:1997
Determination of flexural strength of autoclaved aerated concrete (FOREIGN STANDARD)
DIN EN 13502:2003
Chimneys - Requirements and test methods for clay/ceramic flue terminals (FOREIGN STANDARD)
DIN EN 13500:2003
Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification (FOREIGN STANDARD)
DIN EN 13499:2003
Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification (FOREIGN STANDARD)
DIN EN 13498:2003
Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS) (FOREIGN STANDARD)
DIN EN 13497:2003
Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS) (FOREIGN STANDARD)
DIN EN 13496:2003
Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes (FOREIGN STANDARD)
DIN EN 13495:2003
Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test) (FOREIGN STANDARD)
DIN EN 13494:2003
Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material (FOREIGN STANDARD)
DIN EN 13472:2001
Thermal insulating products for building equipment and industrial installations - Determination of short-term water absorption by partial immersion of preformed pipe insulation; English version of DIN EN 13472 (FOREIGN STANDARD)
DIN EN 13471:2001
Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion; GEnglish version of DIN EN 13471 (FOREIGN STANDARD)
DIN EN 13470:2001
Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation; English version of DIN EN 13470 (FOREIGN STANDARD)
DIN EN 13469:2001
Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation; English version of DIN EN 13469 (FOREIGN STANDARD)
DIN EN 13468:2001
Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water-soluble chloride, fluoride, silicate, and sodium ions and pH; English version of DIN EN 13468 (FOREIGN STANDARD)
DIN EN 13467:2001
Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation; English version of DIN EN 13467 (FOREIGN STANDARD)
DIN EN 13465:2004
Ventilation for buildings - Calculation methods for the determination of air flow rates in dwellings (FOREIGN STANDARD)
DIN EN 13454-2:2007
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods; German version EN 13454-2:2003+A1:2007 (FOREIGN STANDARD)
DIN EN 13450 Berichtigung 1:2004
Corrigenda to DIN EN 13450:2003-06 (FOREIGN STANDARD)
DIN EN 13450:2003
Aggregates for railway ballast (FOREIGN STANDARD)
DIN EN 13416:2001
Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling; English version of DIN EN 13416 (FOREIGN STANDARD)
DIN EN 13412:2006
Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression; German version EN 13412:2006 (FOREIGN STANDARD)
DIN EN 13410:2002
Gas-fired overhead radiant heaters - Ventilation requirements for non-domestic premises; English version of DIN EN 13410 (FOREIGN STANDARD)
DIN EN 13409:2002
Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time (FOREIGN STANDARD)
DIN EN 13408:2002
Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength (FOREIGN STANDARD)
DIN EN 13407:2006
Wall-hung urinals - Functional requirements and test methods; German version EN 13407:2006 (FOREIGN STANDARD)
DIN EN 13403:2003
Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards (FOREIGN STANDARD)
DIN EN 13395-4:2002
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 4: Application of repair mortar overhead (FOREIGN STANDARD)
DIN EN 13395-3:2002
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 3: Test for flow of repair concrete (FOREIGN STANDARD)
DIN EN 13395-2:2002
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 2: Test for flow of grout or mortar (FOREIGN STANDARD)
DIN EN 13395-1:2002
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 1: Test for flow of thixotropic mortars (FOREIGN STANDARD)
DIN EN 13391:2004
Mechanical tests for post-tensioning systems (FOREIGN STANDARD)
DIN EN 13384-3:2006
Chimneys - Thermal and fluid dynamic calculation methods - Part 3: Methods for the development of diagrams and tables for chimneys serving one heating appliance (FOREIGN STANDARD)
DIN EN 13384-2:2009
Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance; German version EN 13384-2:2003+A1:2009 (Foreign Standard)
DIN EN 13384-1:2008
Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance; German version EN 13384-1:2002+A2:2008 (FOREIGN STANDARD)
DIN EN 13383-2:2002
Armourstone - Part 2: Test methods (FOREIGN STANDARD)
DIN EN 13383-1 Berichtigung 1:2004
Corrigenda to DIN EN 13383-1:2002-08 (FOREIGN STANDARD)
DIN EN 13383-1:2002
Armourstone - Part 1: Specification (FOREIGN STANDARD)
DIN EN 1337-9:1998
Structural bearings - Part 9: Protection (FOREIGN STANDARD)
DIN EN 1337-8:2008
Structural bearings - Part 8: Guide Bearings and Restraint Bearings; German version EN 1337-8:2007 (FOREIGN STANDARD)
DIN EN 13377:2002
Prefabricated timber formwork beams - Requirements, classification and assessment (FOREIGN STANDARD)
DIN EN 1337-6:2004
Structural bearings - Part 6: Rocker bearings (FOREIGN STANDARD)
DIN EN 1337-5:2005
Structural bearings - Part 5: Pot bearings (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 13375:2004
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation (FOREIGN STANDARD)
DIN EN 1337-4 Berichtigung 1:2007
Structural bearings - Part 4: Roller bearings; German version EN 1337-4:2004, Corrigenda to DIN EN 1337-4:2004-08; German version EN 1337-4:2004/AC:2007 (FOREIGN STANDARD)
DIN EN 1337-4:2004
Structural bearings - Part 4: Roller bearings (FOREIGN STANDARD)
DIN EN 1337-3:2005
Structural bearings - Part 3: Elastomeric bearings (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 1337-11:1998
Structural bearings - Part 11: Transport, storage and installation (FOREIGN STANDARD)
DIN EN 1337-10:2003
Structural bearings - Part 10: Inspection and maintenance (FOREIGN STANDARD)
DIN EN 1337-1:2001
Structural bearings - Part 1: General design rules; English version of DIN EN 1337-1 (FOREIGN STANDARD)
DIN EN 13369 Berichtigung 1:2007
Common rules for precast concrete products; German version EN 13369:2004, Corigenda to DIN EN 13369:2004-09; German version EN 13369:2004/AC:2006 (FOREIGN STANDARD)
DIN EN 13369/A1:2006
Common rules for precast concrete products; German version EN 13369:2004/A1:2006 (FOREIGN STANDARD)
DIN EN 13330:2003
Shutters - Hard body impact - Test method (FOREIGN STANDARD)
DIN EN 13310:2003
Kitchen sinks - Functional requirements and test methods (FOREIGN STANDARD)
DIN EN 13302:2003
Bitumen and bituminous binders - Determination of viscosity of bitumen using a rotating spindle apparatus (FOREIGN STANDARD)
DIN EN 13295:2004
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation (FOREIGN STANDARD)
DIN EN 13294:2002
Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time (FOREIGN STANDARD)
DIN EN 13279-2:2004
Gypsum binders and gypsum plasters - Part 2: Test methods (FOREIGN STANDARD)
DIN EN 13264:2001
Ventilation for buildings - Floor mounted air terminal devices - Tests for structural classification; English version of DIN EN 13264 (FOREIGN STANDARD)
DIN EN 13263-2:2009
Silica fume for concrete - Part 2: Conformity evaluation; German version EN 13263-2:2005+A1:2009 (Foreign Standard)
DIN EN 13263-1:2009
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria; German version EN 13263-1:2005+A1:2009 (Foreign Standard)
DIN EN 13241-1:2004
Industrial, commercial and garage doors and gates - Product Standard - Part 1: Products without fire resistance or smoke control characteristics (FOREIGN STANDARD)
DIN EN 13225:2004
Precast concrete products - Linear structural elements (FOREIGN STANDARD)
DIN EN 13224:2007
Precast concrete products - Ribbed floor elements; German version EN 13224:2004+A1:2007 (FOREIGN STANDARD)
DIN EN 13216-1:2004
Chimneys - Test methods for system chimneys - Part 1: General test methods (FOREIGN STANDARD)
DIN EN 13213:2001
Hollow floors; English version of DIN EN 13213 (FOREIGN STANDARD)
DIN EN 13203-2:2006
Gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 300 l water storage capacity - Part 2: Assessment of energy consumption; German version EN 13203-2:2006 (FOREIGN STANDARD)
DIN EN 13203-1:2006
Gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 300 l water storage capacity - Part 1: Assessment of performance of hot water deliveries; German version EN 13203-1:2006 (FOREIGN STANDARD)
DIN EN 13200-4:2006
Spectator facilities - Part 4: Seats - Product characteristics; German version EN 13200-4:2006 (FOREIGN STANDARD)
DIN EN 13200-3:2006
Spectator facilities - Part 3: Separating elements - Requirements (FOREIGN STANDARD)
DIN EN 13200-1:2004
Spectator facilities - Part 1: Layout criteria for spectator viewing area - Specification (FOREIGN STANDARD)
DIN EN 13198:2003
Precast concrete products - Street furniture and garden products (FOREIGN STANDARD)
DIN EN 13187:1999
Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983, modified) (FOREIGN STANDARD)
DIN EN 13180:2002
Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts; English version of DIN EN 13180 (FOREIGN STANDARD)
DIN EN 13172:2008
Thermal insulating products - Evaluation of conformity; German version EN 13172:2008 (FOREIGN STANDARD)
DIN EN 13171:2009
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2008 (Foreign Standard)
DIN EN 13170:2009
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification; German version EN 13170:2008 (Foreign Standard)
DIN EN 13169:2009
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification; German version EN 13169:2008 (Foreign Standard)
DIN EN 13168:2009
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification; German version EN 13168:2008 (Foreign Standard)
DIN EN 13167:2009
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification; German version EN 13167:2008 (Foreign Standard)
DIN EN 13166:2009
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification; German version EN 13166:2008 (Foreign Standard)
DIN EN 13165:2009
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification; German version EN 13165:2008 (Foreign Standard)
DIN EN 13164:2009
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification; German version EN 13164:2008 (Foreign Standard)
DIN EN 13163:2009
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification; German version EN 13163:2008 (Foreign Standard)
DIN EN 13162:2009
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification; German version EN 13162:2008 (Foreign Standard)
DIN EN 13142:2004
Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics (FOREIGN STANDARD)
DIN EN 13141-9:2008
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 9: Externally mounted humidity controlled air transfer device; German version EN 13141-9:2008 (Foreign Standard)
DIN EN 13141-8:2006
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) fo (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 13141-7:2004
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of mechanical supply and exhaust ventilation units (including heat recovery) for mechanic (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 13141-6:2004
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling (FOREIGN STANDARD)
DIN EN 13141-5:2005
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 5: Cowls and roof outlet terminal devices (FOREIGN STANDARD)
DIN EN 13141-3:2004
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use (FOREIGN STANDARD)
DIN EN 13141-2:2004
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices (FOREIGN STANDARD)
DIN EN 13141-10:2008
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 10: Humidity controlled extract air terminal device; German version EN 13141-10:2008 (Foreign Standard)
DIN EN 13141-1:2004
Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices (FOREIGN STANDARD)
DIN EN 13139 Berichtigung 1:2004
Corrigenda to DIN EN 13139:2002-08 (FOREIGN STANDARD)
DIN EN 13139:2002
Aggregates for mortar (FOREIGN STANDARD)
DIN EN 13126-8:2006
Building hardware - Requirements and test methods for windows and doors height windows - Part 8: Tilt & Turn, Tilt-First and Turn-Only hardware; German version EN 13126-8:2006 (FOREIGN STANDARD)
DIN EN 13126-7:2007
Building hardware - Requirements and test methods for windows and door height windows - Part 7: Finger catches; German version EN 13126-7:2007 (FOREIGN STANDARD)
DIN EN 13126-6:2009
Building hardware - Requirements and test methods for windows and doors height windows - Part 6: Variable geometry stay hinges (with or without a friction stay); German version EN 13126-6:2008 (Foreign Standard)
DIN EN 13126-4:2009
Building hardware - Requirements and test methods for windows and doors height windows - Part 4: Espagnolettes; German version EN 13126-4:2008 (Foreign Standard)
DIN EN 13126-12:2009
Building hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung projecting reversible hardware; German version EN 13126-12:2008 (Foreign Standard)
DIN EN 13126-11:2009
Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware; German version EN 13126-11:2008 (Foreign Standard)
DIN EN 13126-10:2009
Building hardware - Requirements and test methods for windows and doors height windows - Part 10: Arm-balancing systems; German version EN 13126-10:2008 (Foreign Standard)
DIN EN 13126-1:2006
Building hardware - Requirements and test methods for windows and doors height windows - Part 1: Requirements common to all types of hardware; German version EN 13126-1:2006 (FOREIGN STANDARD)
DIN EN 13125:2001
Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product; English version of DIN EN 13125 (FOREIGN STANDARD)
DIN EN 13120:2009
Internal blinds - Performance requirements including safety; German version EN 13120:2009 (Foreign Standard)
DIN EN 13116:2001
Curtain walling - Resistance to wind load - Performance requirements; English version of DIN EN 13116 (FOREIGN STANDARD)
DIN EN 13115:2001
Windows - Classification of mechanical properties - Racking, torsion and operating forces; English version of DIN EN 13115 (FOREIGN STANDARD)
DIN EN 13111:2001
Flexible sheets for waterproofing - Underlays for discontinuous roofing and walls - Determination of resistance to water penetration; English version of DIN EN 13111 (FOREIGN STANDARD)
DIN EN 13108-21 Berichtigung 1:2009
Bituminous mixtures - Material specifications - Part 21: Factory Production Control; German version EN 13108-21:2006, Corrigendum to DIN EN 13108-21:2006-07; German version EN 13108-21:2006/AC:2008 (Foreign Standard)
DIN EN 13108-21:2006
Bituminous mixtures - Material specifications - Part 21: Factory Production Control; German version EN 13108-21:2006 (FOREIGN STANDARD)
DIN EN 13084-8:2005
Free-standing industrial chimneys - Part 8: Design and execution of mast construction with satellite components (FOREIGN STANDARD)
DIN EN 13084-7 Berichtigung 1:2008
Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners; German version EN 13084-7:2005, Corrigendum to DIN EN 13084-7:2006-06; German version EN 13084-7:2005/AC:2008
DIN EN 13084-7:2006
Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners; German version EN 13084-7:2005 (FOREIGN STANDARD)
DIN EN 13084-6:2005
Free-standing chimneys - Part 6: Steel liners - Design and execution (FOREIGN STANDARD)
DIN EN 13084-5:2005
Free-standing chimneys - Part 5: Material for brick liners - Product specifications (FOREIGN STANDARD)
DIN EN 13084-4:2005
Free-standing chimneys - Part 4: Brick liners - Design and execution (FOREIGN STANDARD)
DIN EN 13084-2:2007
Free-standing chimneys - Part 2: Concrete chimneys; German version EN 13084-2:2007 (FOREIGN STANDARD)
DIN EN 13084-1:2007
Free-standing chimneys - Part 1: General requirements; German version EN 13084-1:2007 (FOREIGN STANDARD)
DIN EN 13069:2005
Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods (FOREIGN STANDARD)
DIN EN 13063-2:2007
Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions; German version EN 13063-2:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 13063-1:2007
Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance; German version EN 13063-1:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 13062:2003
Products and systems for the protection and repair of concrete structure - Test methods - Determination of thixotropy of products for protects of reinforcement (FOREIGN STANDARD)
DIN EN 13057:2002
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption (FOREIGN STANDARD)
DIN EN 13055-2:2004
Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications (FOREIGN STANDARD)
DIN EN 13055-1 Berichtigung 1:2004
Corrigenda to DIN EN 13055-1:2002-08 (FOREIGN STANDARD)
DIN EN 13055-1:2002
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout (FOREIGN STANDARD)
DIN EN 13053:2007
Ventilation for buildings - Air handling units - Rating and performance for units, components and sections; German version EN 13053:2006 (FOREIGN STANDARD)
DIN EN 13051:2001
Curtain walling - Watertightness - Site test; English version of DIN EN 13051 (FOREIGN STANDARD)
DIN EN 13049:2003
Windows - Soft and heavy body impact - Test method, safety requirements and classification (FOREIGN STANDARD)
DIN EN 13043 Berichtigung 1:2004
Corrigenda to DIN EN 13043:2002-12 (FOREIGN STANDARD)
DIN EN 13043:2002
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas (FOREIGN STANDARD)
DIN EN 13030:2002
Ventilation for buildings - Terminals - Performance testing of louvres subjected to simulated rain; English version of DIN EN 13030 (FOREIGN STANDARD)
DIN EN 1303 Berichtigung 1:2008
Building hardware - Cylinders for locks - Requirements and test methods; German version EN 1303:2005, Corrigendum to DIN EN 1303:2005-04; German version EN 1303:2005/AC:2008 (Foreign Standard)
DIN EN 1303:2005
Building hardware - Cylinders for locks - Requirements and test methods (FOREIGN STANDARD)
DIN EN 13020:2005
Road surface treatment machines - Safety requirements (FOREIGN STANDARD)
DIN EN 13015:2008
Maintenance for lifts and escalators - Rules for maintenance instructions; German version EN 13015:2001+A1:2008 (Foreign Standard)
DIN EN 13009:2000
Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient; English version of DIN EN 13009 (FOREIGN STANDARD)
DIN EN 130:1990
Methods of testing doors; test for change in stiffness of the door leaves by repeated torsion (FOREIGN STANDARD)
DIN EN 1298:1996
Mobile access and working towers - Rules and guidelines for the preparation of an instruction manual (FOREIGN STANDARD)
DIN EN 12978:2003
Industrial, commercial and garage doors and gates - Safety devices for power-operated doors and gates - Requirements and test methods (FOREIGN STANDARD)
DIN EN 12978/A1:2008
Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods; English version EN 12978:2003/FprA1:2009 (Foreign Standard)
DIN EN 12970:2001
Mastic asphalt for waterproofing - Definitions, requirements and test methods; English version of DIN EN 12970 (FOREIGN STANDARD)
DIN EN 1297:2004
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water (FOREIGN STANDARD)
DIN EN 1296:2001
Bitumen, plastic and rubber sheets for roof waterprofing - Method of artificial ageing by long-term exposure to elevated temperature; English version of DIN EN 1296 (FOREIGN STANDARD)
DIN EN 12956:1999
Wallcoverings in roll form - Determination of dimensions, straightness, spongeability and washability (FOREIGN STANDARD)
DIN EN 12951:2005
Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods (FOREIGN STANDARD)
DIN EN 1294:2000
Door leaves - Determination of the behaviour under humidity variations in successive uniform climates; English version of DIN EN 1294 (FOREIGN STANDARD)
DIN EN 12939:2001
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance; English ver (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 12897:2006
Water supply - Specification for indirectly heated unvented (closed) storage water heaters; German version EN 12897:2006 (FOREIGN STANDARD)
DIN EN 1287:1999
Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications (FOREIGN STANDARD)
DIN EN 12865:2001
Hygrothermal performance of building components and building elements - Determination of the resistance of external wall systems to driving rain under pulsating air pressure; English version of DIN EN 12865 (FOREIGN STANDARD)
DIN EN 1286:1999
Sanitary tapware - Low pressure mechanical mixing valves - General technical specifications (FOREIGN STANDARD)
DIN EN 12859:2008
Gypsum blocks - Definitions, requirements and test methods; German version EN 12859:2008 (FOREIGN STANDARD)
DIN EN 12846:2002
Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer (FOREIGN STANDARD)
DIN EN 12843:2004
Precast concrete products - Masts and poles (FOREIGN STANDARD)
DIN EN 12839:2001
Precast concrete products - Elements for fences; English version of DIN EN 12839 (FOREIGN STANDARD)
DIN EN 12835:2001
Airtight shutters - Air permeability test; English version of DIN EN 12835 (FOREIGN STANDARD)
DIN EN 12833:2001
Skylight and conservatory roller shutters - Resistance to snow load - Test method; English version of DIN EN 12833 (FOREIGN STANDARD)
DIN EN 12831:2003
Heating systems in buildings - Method for calculation of the design heat load (FOREIGN STANDARD)
DIN EN 12828:2003
Heating systems in buildings - Design of water-based heating systems (FOREIGN STANDARD)
DIN EN 12825:2002
Raised access floors; English version of DIN EN 12825 (FOREIGN STANDARD)
DIN EN 12813:2004
Temporary works equipment - Loadbearing towers of prefabricated components - Particular methods of structural design (FOREIGN STANDARD)
DIN EN 12812:2008
Falsework - Performance requirements and general design; German version EN 12812:2008 (Foreign Standard)
DIN EN 12811-3:2003
Temporary works equipment - Part 3: Load testing (FOREIGN STANDARD)
DIN EN 12811-2:2004
Temporary works equipment - Part 2: Information on materials (FOREIGN STANDARD)
DIN EN 12811-1:2004
Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design (FOREIGN STANDARD)
DIN EN 12810-2:2004
Facade scaffolds made of prefabricated components - Part 2: Particular methods of structural design (FOREIGN STANDARD)
DIN EN 12810-1:2004
Facade scaffolds made of prefabricated components - Part 1: Products specifications (FOREIGN STANDARD)
DIN EN 12808-4:2002
Adhesives and grouts for tiles - Part 4: Determination of shrinkage; English version of DIN EN 12808-4 (FOREIGN STANDARD)
DIN EN 12794 Berichtigung 1:2009
Precast concrete products - Foundation piles; German version EN 12794:2005+A1:2007, Corrigendum to DIN EN 12794:2007-08; German version EN 12794:2005+A1:2007/AC:2008 (Foreign Standard)
DIN EN 12794:2007
Precast concrete products - Foundation piles; German version EN 12794:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 12730:2001
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to static loading; English version of DIN EN 12730 (FOREIGN STANDARD)
DIN EN 12706:1999
Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics (FOREIGN STANDARD)
DIN EN 12691:2006
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact; German version EN 12691:2006 (FOREIGN STANDARD)
DIN EN 12667:2001
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance; English version of DIN EN 12667 (FOREIGN STANDARD)
DIN EN 12664:2001
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products with medium and low thermal resistance; En (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 12649:2008
Concrete compactors and smoothing machines - Safety; German version EN 12649:2008 (Foreign Standard)
DIN EN 1264-5:2009
Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output; German version EN 1264-5:2008 (Foreign Standard)
DIN EN 1264-4:2001
Floor heating - Systems and components - Part 4: Installation; English version of DIN EN 1264-4 (FOREIGN STANDARD)
DIN EN 1264-3:1997
Floor heating - Systems and components (FOREIGN STANDARD)
DIN EN 1264-2:2009
Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods; German version EN 1264-2:2008 (Foreign Standard)
DIN EN 12637-3:2004
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers (FOREIGN STANDARD)
DIN EN 12637-1:2004
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete (FOREIGN STANDARD)
DIN EN 12636:1999
Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete (FOREIGN STANDARD)
DIN EN 12635:2009
Industrial, commercial and garage doors and gates - Installation and use; German version EN 12635:2002+A1:2008 (Foreign Standard)
DIN EN 12629-8:2003
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) (FOREIGN STANDARD)
DIN EN 12629-7:2004
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products (FOREIGN STANDARD)
DIN EN 12629-5-4:2004
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines (FOREIGN STANDARD)
DIN EN 12629-5-3:2004
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines (FOREIGN STANDARD)
DIN EN 12629-5-2:2004
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis (FOREIGN STANDARD)
DIN EN 12629-5-1:2004
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis (FOREIGN STANDARD)
DIN EN 12629-4:2001
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4: Concrete roof tile making machines; English version of DIN EN 12629-4 (FOREIGN STANDARD)
DIN EN 12629-3:2003
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines (FOREIGN STANDARD)
DIN EN 12629-2:2003
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines (FOREIGN STANDARD)
DIN EN 12629-1:2001
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements; English version of DIN EN 12629-1 (FOREIGN STANDARD)
DIN EN 12620:2008
Aggregates for concrete; German version EN 12620:2002+A1:2008 (FOREIGN STANDARD)
DIN EN 12618-3:2004
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method (FOREIGN STANDARD)
DIN Standards : DIN ICS 91 Construction Materials and Building(Page 2)
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
