DIN Standards : DIN ICS 75 Petroleum And Related Technologies
DIN 51345:1986
Testing the compatibility of fire-resistant hydraulic fluids with metals (FOREIGN STANDARD)
DIN 51350-4:1984
Testing of lubricants; testing by the Shell four-ball tester; determination of welding load of consistent lubricants (FOREIGN STANDARD)
DIN 51350-5:1984
Testing of lubricants; testing by the Shell four-ball tester; determination of wear characteristics for consistent lubricants (FOREIGN STANDARD)
DIN 51350-6:1996
Determination of shear stability of polymer-containing lubricating oils by the Shell four-ball tester (FOREIGN STANDARD)
DIN 51352-1:1985
Testing of lubricants; determination of ageing characteristics of lubricating oils; increase in Conradson carbon residue after ageing by passing air through the lubricating oil (FOREIGN STANDARD)
DIN 51352-2:1985
Testing of lubricants; determination of ageing characteristics of lubricating oils; Conradson carbon residue after ageing by passing air through the lubricating oil in the presence of iron(III)oxide (FOREIGN STANDARD)
DIN 51358:1996
Testing of corrosion preventing properties of lubricating oils for internal combustion engines by the seawater immersion test (FOREIGN STANDARD)
DIN 51360-1:1985
Testing of cooling lubricants; determination of corrosion preventing characteristics of cooling lubricants mixed with water; Herbert corrosion test (FOREIGN STANDARD)
DIN 51360-2:1981
Testing of cooling lubricants; determination of corrosion preventing characteristics of cooling lubricants mixed with water; chip/filter paper method (FOREIGN STANDARD)
DIN 51363-2:2003
Determining the phosphorus content of lubricating oils and additives by wavelength dispersive X-ray fluorescence spectrometry (FOREIGN STANDARD)
DIN 51368:1990
Determination of fraction separated by hydrochloric acid from water mix metal working fluids (FOREIGN STANDARD)
DIN 51369:1981
Testing of cooling lubricants; Determination of the pH value of water-mixed cooling lubricants (FOREIGN STANDARD)
DIN 51375-2:2001
Determination the 1,2-ethanediol content of motor oils by gas chromatography (FOREIGN STANDARD)
DIN 51377:2003
Determination of the apparent viscosity of engine oils at -5 ?C to -35 ?C - using the cold-cranking simulator (FOREIGN STANDARD)
DIN 51378:1994
Determination of carbon-type composition of mineral oils (FOREIGN STANDARD)
DIN 51380:1990
Determination of readily volatile components in used automotive engine oils by gas chromatography (FOREIGN STANDARD)
DIN 51390-2:1997
Determination of the silicon content of petroleum products by wavelength-dispersive X-ray fluorescence spectrometry (FOREIGN STANDARD)
DIN 51391-2:1994
Determination of additive elements content of lubricants by wavelength-dispersive X-ray fluorescence spectrometry (XRS) (FOREIGN STANDARD)
DIN 51396-1:2005
Testing of lubricants - Determination of wear elements - Part?1: Direct determination by inductively coupled plasma optical emission spectroscopy (ICP-OES) (FOREIGN STANDARD)
DIN 51400-2:2001
Determining the total sulfur content of petroleum products by the Grote-Krekeler combustion method (FOREIGN STANDARD)
DIN 51400-3:2001
Determination the total sulfur content of petroleum products by Schoeniger comustion method and thorin or sulfonazo III titration (FOREIGN STANDARD)
DIN 51400-4:2000
Determining the total sulfur content of petroleum products by the Lingener combustion method (FOREIGN STANDARD)
DIN 51400-7:1992
Determination of the sulfur content (total sulfur) of petroleum products by oxidative microcoulometry (FOREIGN STANDARD)
DIN 51405:2004
General principles governing the gas chromatographic analysis of petroleum products and related liquids and solvents used in paints an varnishes (FOREIGN STANDARD)
DIN 51408-1:1983
Testing of liquid petroleum hydrocarbons; determination of chlorine content; Wickbold combustion method (FOREIGN STANDARD)
DIN 51412-1:2005
Testing of petroleum products - Determination of the electrical conductivity - Part 1: Laboratory method (FOREIGN STANDARD)
DIN 51412-2:2006
Testing of petroleum products - Determination of the electrical conductivity - Part 2: Field method (FOREIGN STANDARD)
DIN 51413-2:1984
Analysis of liquid petroleum products by gas chromatography; determination of benzene content (FOREIGN STANDARD)
DIN 51417-2:1997
Determination of mineral oil content of water-miscible metalworking lubricants by column chromatography (FOREIGN STANDARD)
DIN 51422-2:2004
Testing of petroleum products - Gas chromatographic determination of the purity of cetane and 1-methylnaphthalene (FOREIGN STANDARD)
DIN 51425:2004
Testing of mineral oil hydrocarbons and similar materials - Analysis by high pressure liquid chromatography - General working principles (FOREIGN STANDARD)
DIN 51426:2002
Determination of the red dye content and marker no. 2 content of domestic fuel oil by spectrophotometry (FOREIGN STANDARD)
DIN 51431-1:1997
Determination of magnesium content of lubricants by atomic absorption spectrometry (FOREIGN STANDARD)
DIN 51431-2:2004
Determination of magnesium content of lubricants by wavelength dispersive X-ray fluorescence spectrometry (FOREIGN STANDARD)
DIN 51432:1992
Determination of water and solvent in used oils and of their distillation residue by the distillation method (FOREIGN STANDARD)
DIN 51433:1992
Determination of the mineral oil content of used oil by infrared spectrometry (FOREIGN STANDARD)
DIN 51440-1:2003
Determination the phosphorus content of petrols by wavelength-dispersive X-ray fluorescence spectrometry (FOREIGN STANDARD)
DIN 51443:1992
Direct determination of the boron content of lubricating oils by atomic absorption spectrometry (AAS) (FOREIGN STANDARD)
DIN 51443-2:2001
Direct determination of boron content of lubricants by inductively coupled plasma/optical emission spectroscopy (ICP/OES) (FOREIGN STANDARD)
DIN 51444:2003
Determination of bound nitrogen in petroleum products by combustion and chemiluminescence (FOREIGN STANDARD)
DIN 51448-1:1997
Determination of certain liquid petroleum hydrocarbons by gas chromatography using a column switching technique (FOREIGN STANDARD)
DIN 51451:2004
Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles (Foreign Standard)
DIN 51453:2004
Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method (Foreign Standard)
DIN 51502:1990
Designation of lubricants and marking of lubricant containers, equipment and lubricating points (FOREIGN STANDARD)
DIN 51503-1:1997
Lubricants - Refrigerator oils - Minimum requirements (FOREIGN STANDARD)
DIN 51503-2:1998
Testing used lubricants for refrigeration compressors (FOREIGN STANDARD)
DIN 51506:1985
Lubricants; VB and VC lubricating oils with and without additives and VDL lubricating oils; classification and requirements (FOREIGN STANDARD)
DIN 51515-1:2001
Normal-duty L-TD type lubricants and governor fluids for use turbines (FOREIGN STANDARD)
DIN 51519:1998
ISO viscosity classification for industrial liquid lubricants (FOREIGN STANDARD)
DIN 51520:1995
Non-aqueous metalworking fluids - Minimum requirements and testing (FOREIGN STANDARD)
DIN 51521:1999
Type SE water-miscible metalworking fluids - Requirements and testing (FOREIGN STANDARD)
DIN 51522:1998
Heat transfer fluids - Requirements and testing (FOREIGN STANDARD)
DIN 51524-1:2006
Pressure fluids - Hydraulic oils - Part 1: HL hydraulic oils; Minimum requirements (FOREIGN STANDARD)
DIN 51524-1 Berichtigung 1:2006
Pressure fluids - Hydraulic oils - Part 1: HL hydraulic oils; Minimum requirements, Corrigenda to DIN 51524-1:2006-04 (FOREIGN STANDARD)
DIN 51524-2:2006
Pressure fluids - Hydraulic oils - Part 2: HLP hydraulic oils; Minimum requirements (FOREIGN STANDARD)
DIN 51524-2 Berichtigung 1:2006
Pressure fluids - Hydraulic oils - Part 2: HLP hydraulic oils; Minimum requirements, Corrigenda to DIN 51524-2:2006-04 (FOREIGN STANDARD)
DIN 51524-3:2006
Pressure fluids - Hydraulic oils - Part 3: HVLP hydraulic oils; Minimum requirements (FOREIGN STANDARD)
DIN 51524-3 Berichtigung 1:2006
Pressure fluids - Hydraulic oils - Part 3: HVLP hydraulic oils; Minimum requirements, Corrigenda to DIN 51524-3:2006-04 (FOREIGN STANDARD)
DIN 51528:1998
Determination of thermal stability of unused heat transfer fluids (FOREIGN STANDARD)
DIN 51538:1998
Testing of lubricants for refrigeration compressors for resistance to ammonia (FOREIGN STANDARD)
DIN 51554-1:1978
Testing of mineral oils; Test of susceptibility to ageing according to Baader; Purpose, sampling, ageing (FOREIGN STANDARD)
DIN 51554-2:1978
Testing of mineral oils; test of susceptibility to ageing according to Baader; testing at 110 ?C (FOREIGN STANDARD)
DIN 51554-3:1978
Testing of mineral oils; Test of susceptibility to ageing according to Baader; Testing at 95 ?C (FOREIGN STANDARD)
DIN 51558-1:1979
Testing of Mineral Oils; Determination of the Neutralization Number, Colour-indicator titration (FOREIGN STANDARD)
DIN 51563:1976
Testing of Mineral Oils and Related Materials; Determination of Viscosity Temperature Relation; Slope m (FOREIGN STANDARD)
DIN 51574:2004
Testing of lubricants - Sampling of lubricating oils from internal combustion engines (Foreign Standard)
DIN 51575:1984
Testing of petroleum products; determination of sulfated ash (FOREIGN STANDARD)
DIN 51576:2003
Determination the salt content of petoleum products (FOREIGN STANDARD)
DIN 51577-4:1994
Determination of chlorine and bromine contents of petroleum products by energy-dispersive X-ray spectrometry using a miniature spectrometer (FOREIGN STANDARD)
DIN 51579:1965
Testing of Paraffin; Determination of Needle Penetration (FOREIGN STANDARD)
DIN 51581-1:2003
Determining the evaporative loss of petroleum products by the Noack method (FOREIGN STANDARD)
DIN 51581-2:1997
Determination of evaporation loss of petroleum products by gas chromatography (FOREIGN STANDARD)
DIN 51589-1:1991
Determination of water separation ability of lubricating oils and low-flammability fluids after contact with steam (FOREIGN STANDARD)
DIN 51595:2000
Determination of asphaltene content of petroleum products by precipitation in heptane (FOREIGN STANDARD)
DIN 51603-3:2003
S type fuel oils - Requirements and testing (FOREIGN STANDARD)
DIN 51603-5:2003
SA type fuel oils - Requirements and testing (FOREIGN STANDARD)
DIN 51604-1:1982
FAM testing fluid for polymer materials; Composition and requirements (FOREIGN STANDARD)
DIN 51604-2:1984
Methanolic FAM testing fluid for polymer materials; composition and requirements (FOREIGN STANDARD)
DIN 51604-3:1984
Methanolic lower layer FAM testing fluid for polymer materials; composition and requirements (FOREIGN STANDARD)
DIN 51613:1966
Testing of Liquefied Petroleum Gases; Determination of Elementary Sulphur and Residue on Evaporation (FOREIGN STANDARD)
DIN 51622:1985
Liquefied petroleum gases; propane, propene, butane, butene and their mixtures; requirements (FOREIGN STANDARD)
DIN 51630:1999
Petroleum spirit - Requirements and testing (FOREIGN STANDARD)
DIN 51631:1999
Special-boiling-point spirits - Requirements and testing (FOREIGN STANDARD)
DIN 51632-1:2001
Regular wite spirit - Requirements and testing (FOREIGN STANDARD)
DIN 51632-2:2001
Low aromatics white spirit - Requirements and testing (FOREIGN STANDARD)
DIN 51666:2007
Testing of petroleum products - Determination of composition for calculation of carbon content and calorific value of heating gas from refineries - Gas chromatography method (FOREIGN STANDARD)
DIN 51705:2001
Determination of bulk density of solid fuels (FOREIGN STANDARD)
DIN 51718:2002
Determining the moisture content of solid fuels (FOREIGN STANDARD)
DIN 51719:1997
Determination of ash in solid mineral fuels (FOREIGN STANDARD)
DIN 51720:2001
Determining the volatile matter content of solid fuels (FOREIGN STANDARD)
DIN 51721:2001
Determining the carbon and hydrogen contents of solid fuel by the Radmacher-Hoverath method (FOREIGN STANDARD)
DIN 51723:2002
Determining the fluorine content of solid fuels (FOREIGN STANDARD)
DIN 51724-1:1999
Determination of total sulfur in solid fuels (FOREIGN STANDARD)
DIN 51724-2:1999
Determination of sulfur compounds in solid fuels (FOREIGN STANDARD)
DIN 51725:2004
Testing of solid fuels - Determination of the phosphorus content (FOREIGN STANDARD)
DIN 51726:2004
Testing of solid fuels - Determination of the carbonate carbon dioxide content (FOREIGN STANDARD)
DIN 51727:2001
Determination of chlorine content of solid fuels (FOREIGN STANDARD)
DIN 51729-10:1996
Analysis of coal ash and coke ash by X-ray fluorescence (XFA) (FOREIGN STANDARD)
DIN 51739:1998
Determining hard coal dilatation (FOREIGN STANDARD)
DIN 51741:1998
Determination of the crucible swelling number of coal (FOREIGN STANDARD)
DIN 51742:2001
Determination of the Hardgrove grindability index of hard coal (FOREIGN STANDARD)
DIN 51750-1:1990
Sampling of petroleum products; general information (FOREIGN STANDARD)
DIN 51750-2:1990
Sampling of liquid petroleum products (FOREIGN STANDARD)
DIN 51750-3:1991
Sampling of pasty and solid petroleum products (FOREIGN STANDARD)
DIN 51755:1974
Testing of Mineral Oils and Other Combustible Liquids; Determination of Flash Point by the Closed Tester according to Abel-Pensky (FOREIGN STANDARD)
DIN 51756-1:1990
Determination of knock characteristics (octane number) of petrol; general (FOREIGN STANDARD)
DIN 51756-7:1986
Testing of gasolines; determination of knock characteristics (octane number) of alcohols and alcohol/fuel mixtures using the CFR engine (FOREIGN STANDARD)
DIN 51757:1994
Determination of density of petroleum products (FOREIGN STANDARD)
DIN 51769-6:1990
Determination of total lead content of petrol with a lead content exceeding 25 mg/l by wavelenght-dispersive X-ray spectrometry (XRS) (FOREIGN STANDARD)
DIN 51773:1996
Determination of ignition quality (cetane number) of diesel fuels using the BASF engine (FOREIGN STANDARD)
DIN 51777-2:1974
Testing of Mineral Oil Hydrocarbons and Solvents; Determination of Water Content according to Karl Fischer; Indirect Method (FOREIGN STANDARD)
DIN 51790-3:1978
Testing of Liquid Fuels; Determination of Vanadium Content; Vanadium Content in the Range of 0.4 to 4.0 mg/kg; Determination by Flameless Atomic Absorption Spectroscopy after Incineration (FOREIGN STANDARD)
DIN 51790-7:2002
Determining the vanadium and nickel content of liquid fuels by wavelength dispersive X-ray spectrometry using the fundamental parameter method (FOREIGN STANDARD)
DIN 51794:2003
Determing of ignition temperature of petroleum products (FOREIGN STANDARD)
DIN 51798:2005
Testing of liquid fuels - Determination of the crystallization point of pure benzene (FOREIGN STANDARD)
DIN 51802:1990
Testing lubricating greases for their corrosion-inhibiting properties by the SKF Emcor method (FOREIGN STANDARD)
DIN 51807-1:1979
Testing of lubricants; Test of the behaviour of lubricating greases in the presence of water; Static test (FOREIGN STANDARD)
DIN 51813:1989
Determination of solid matter content of lubricating greases (particle sizes above 25 ?m) (FOREIGN STANDARD)
DIN 51817:1998
Determination of oil separation from lubricating grease under static conditions (FOREIGN STANDARD)
DIN 51819-1:1999
Testing rolling bearing lubricants using the FE 8 wear test machine - Principles (FOREIGN STANDARD)
DIN 51819-2:1999
Testing rolling bearing lubricants using the FE 8 wear test machine - Test procedure (FOREIGN STANDARD)
DIN 51825:2004
Lubricants - Lubricating greases K - Classification and requirements (FOREIGN STANDARD)
DIN 51828-1:2000
Determining the biodegradability of lubricants and related products - Part 1: General (FOREIGN STANDARD)
DIN 51853:1995
Sampling of gaseous fuels (FOREIGN STANDARD)
DIN 51855-8:1997
Determination of sulfur compounds in gaseous fuels and other gases - Part 8: Gas-chromatographic method using specific detectors for determining hydrogen sulfide, carbonyl sulfide and other sulfur compounds (FOREIGN STANDARD)
DIN 51865-1:1998
Determination of mercury content of gaseous fuels by chemisorption on iodine and atomic absorption spectrometry (AAS) (FOREIGN STANDARD)
DIN 51865-2:2000
Determining of mercury content of gaseous fuels by the modified Lingener combustion method and atomic absorption spectrometry (FOREIGN STANDARD)
DIN 51865-3:1998
Determination of mercury content of gaseous fuels and absorption in solutions by atomic absorption spectrometry (AAS) (FOREIGN STANDARD)
DIN 51869:2000
Dermining the water content of gaseous fuels and other gases by Karl Fischer coulometric method (FOREIGN STANDARD)
DIN 51872-5:1996
Determination of the composition of gaseous fuels and other gases by capillary gas chromatography (FOREIGN STANDARD)
DIN 51900-1:2000
Determining the gross calorific value of solid and liquid fuels using the bomb calorimeter, and calculation of net calorific value - Part 1: General information (FOREIGN STANDARD)
DIN 51900-2:2003
Determining the gross calorific value of solid and liquid fuels using the isoperibol or static jacket calorimeter and calculation of net calorific value (FOREIGN STANDARD)
DIN 51900-3:2005
Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 3: Method using adiabatic jacket (FOREIGN STANDARD)
DIN 52025:2004
Determination the Kraemer-Sarnow softening point of fusible carbonaceous materials (FOREIGN STANDARD)
DIN EN 116:1998
Diesel and domestic heating fuels - Determination of cold filter plugging point (FOREIGN STANDARD)
DIN EN 1160:1996
Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas (FOREIGN STANDARD)
DIN EN 12066:1998
Installations and equipment for liquefied natural gas - Testing of insulating linings for liquefied natural gas impounding areas (FOREIGN STANDARD)
DIN EN 12081:2008
Railway applications - Axleboxes - Lubricating greases; German version EN 12081:2007 (FOREIGN STANDARD)
DIN EN 12177:1998
Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography (FOREIGN STANDARD)
DIN EN 12177 Berichtigung 1:2006
Liquid petroleum products - Unleaded petrol - Determination of benzene content by gas chromatography; German version EN 12177:1998, Corrigenda to DIN EN 12177:1998-08; German version EN 12177:1998/AC:2000 (FOREIGN STANDARD)
DIN EN 12592:2007
Bitumen and bituminous binders - Determination of solubility; German version EN 12592:2007 (FOREIGN STANDARD)
DIN EN 12593:2007
Bitumen and bituminous binders - Determination of the Fraass breaking point; German version EN 12593:2007 (FOREIGN STANDARD)
DIN EN 12594:2007
Bitumen and bituminous binders - Preparation of test samples; German version EN 12594:2007 (FOREIGN STANDARD)
DIN EN 12595:2007
Bitumen and bituminous binders - Determination of kinematic viscosity; German version EN 12595:2007 (FOREIGN STANDARD)
DIN EN 12596:2007
Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary; German version EN 12596:2007 (FOREIGN STANDARD)
DIN EN 12606-1:2007
Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation; German version EN 12606-1:2007 (FOREIGN STANDARD)
DIN EN 12606-2:2000
Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method by extraction; English version of DIN EN 12606-2 (FOREIGN STANDARD)
DIN EN 12607-1:2007
Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 1: RTFOT method; German version EN 12607-1:2007 (FOREIGN STANDARD)
DIN EN 12607-2:2007
Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 2: TFOT Method; German version EN 12607-2:2007 (FOREIGN STANDARD)
DIN EN 12607-3:2007
Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 3: RFT Method; German version EN 12607-3:2007 (FOREIGN STANDARD)
DIN EN 12634:1999
Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method (FOREIGN STANDARD)
DIN EN 12662:2008
Liquid petroleum products - Determination of contamination in middle distillates; German version EN 12662:2008 (FOREIGN STANDARD)
DIN EN 12766-1:2000
Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD); Englis (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 12766-2:2001
Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (PCB) content; English version of DIN EN 12766-2 (FOREIGN STANDARD)
DIN EN 12766-3:2005
Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chr (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 12766-3 Berichtigung 1:2007
Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chr (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 12838:2000
Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems; English version of DIN EN 12838 (FOREIGN STANDARD)
DIN EN 12847:2009
Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions; German version EN 12847:2009 (Foreign Standard)
DIN EN 12848:2009
Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions; German version EN 12848:2009 (Foreign Standard)
DIN EN 12849:2009
Bitumen and bituminous binders - Determination of penetration power of bituminous emulsions; German version EN 12849:2009 (Foreign Standard)
DIN EN 12850:2009
Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions; German version EN 12850:2009 (Foreign Standard)
DIN EN 12916:2006
Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection; German version EN 12916:2006 (FOREIGN STANDARD)
DIN EN 13012:2002
Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers; English version of DIN EN 13012 (FOREIGN STANDARD)
DIN EN 13016-1:2007
Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE); German version EN 13016-1:2007 (FOREIGN STANDARD)
DIN EN 13016-2:2007
Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute pressure (AVP) between 40 ?C and 100 ?C; German version EN 13016-2:2007 (FOREIGN STANDARD)
DIN EN 13074:2002
Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation (FOREIGN STANDARD)
DIN EN 13075-1:2009
Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method; German version EN 13075-1:2009 (Foreign Standard)
DIN EN 13075-2:2009
Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions; German version EN 13075-2:2009 (Foreign Standard)
DIN EN 13131:2000
Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method; English version of DIN EN 13131 (FOREIGN STANDARD)
DIN EN 13132:2002
Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching; English version of DIN EN 13132 (FOREIGN STANDARD)
DIN EN 13179-1:2000
Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test; English version of DIN EN 13179-1 (FOREIGN STANDARD)
DIN EN 13179-2:2000
Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number; English version of DIN EN 13179-2 (FOREIGN STANDARD)
DIN EN 13301:2003
Bitumen and bituminous binders - Determination of staining tendency of bitumen (FOREIGN STANDARD)
DIN EN 13303:2009
Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen; German version EN 13303:2009 (Foreign Standard)
DIN EN 13304:2009
Bitumen and bituminous binders - Framework for specification of oxidised bitumens; German version EN 13304:2009 (Foreign Standard)
DIN EN 13305:2009
Bitumen and bituminous binders - Framework for specification of hard industrial bitumens; German version EN 13305:2009 (Foreign Standard)
DIN EN 13352:2002
Specification for the performance of automatic tank contents gauges (FOREIGN STANDARD)
DIN EN 13357:2003
Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens (FOREIGN STANDARD)
DIN EN 13358:2004
Bitumen and bituminous binders - Determination of the distillation characteristics of petroleum cut back bitumen products (FOREIGN STANDARD)
DIN EN 13398:2004
Bitumen and bituminous binders - Determination of the elastic recovery of modified bitumen (FOREIGN STANDARD)
DIN EN 13399:2004
Bitumen and bituminous binders - Determination of storage stability of modified bitumen (FOREIGN STANDARD)
DIN EN 13587:2004
Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method (FOREIGN STANDARD)
DIN EN 13614:2004
Bitumen and bituminous binders - Determination of adhesivity of bitumen emulsions by water immersion test - Aggregate method (FOREIGN STANDARD)
DIN EN 13617-2:2004
Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers (FOREIGN STANDARD)
DIN EN 13617-3:2004
Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves (FOREIGN STANDARD)
DIN EN 13617-4:2005
Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers (FOREIGN STANDARD)
DIN EN 13632:2004
Bitumen and bituminous binders - Visualisation of polymer dispersion in polymer modified bitumen (FOREIGN STANDARD)
DIN EN 13645:2002
Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 t (FOREIGN STANDARD)
DIN EN 13723:2002
Petroleum products - Determination of low lead contents in gasolines by wavelength-dispersive X-ray fluorescence spectrometry (XRF) (FOREIGN STANDARD)
DIN EN 14077:2004
Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method (FOREIGN STANDARD)
DIN EN 14078:2004
Liquid petroleum products - Determination of fatty acid methyl esters (FAME) in middle distillates - Infrared spectroscopy method (FOREIGN STANDARD)
DIN EN 14125:2007
Thermoplastic and flexible metal pipework for underground installation at petrol filling stations; German version EN 14125:2004+A1:2006 (FOREIGN STANDARD)
DIN EN 14156:2003
Derivatives from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods (FOREIGN STANDARD)
DIN EN 14161:2004
Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2000 modified); German and English version EN 14161:2003 (FOREIGN STANDARD)
DIN EN 14213:2003
Heating fuels - Fatty acid methyl esters (FAME) - Requirements and test methods (FOREIGN STANDARD)
DIN EN 14214:2009
Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods; German version EN 14214:2008 (Foreign Standard)
DIN EN 1425:2006
Bitumen and bituminous binders - Characterization of perceptible properties; German version EN 1425:1999 + A1:2006 (FOREIGN STANDARD)
DIN EN 1426:2007
Bitumen and bituminous binders - Determination of needle penetration; German version EN 1426:2007 (FOREIGN STANDARD)
DIN EN 14260:2003
Coal tar and pitch based binders and related products - Road tars - Characteristics and test methods (FOREIGN STANDARD)
DIN EN 14261:2003
Coal tar and pitch based binders and related products - Refractory binders - Characteristics and test methods (FOREIGN STANDARD)
DIN EN 14262:2003
Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: Briquetting pitch - Characteristics and test methods (FOREIGN STANDARD)
DIN EN 14263:2003
Coal tar and pitch based binders and related products - Carbon binder pitch - Characteristics and test methods (FOREIGN STANDARD)
DIN EN 14264:2003
Coal tar and pitch based binders and related products - Impregnating pitch - Characteristics and test methods (FOREIGN STANDARD)
DIN EN 14265:2003
Coal tar and pitch based binders and related products - Painting tar - Characteristics and test methods (FOREIGN STANDARD)
DIN EN 14266:2003
Coal tar and pitch based binders and related products - Coating tar - Characteristics and test methods (FOREIGN STANDARD)
DIN EN 1427:2007
Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method; German version EN 1427:2007 (FOREIGN STANDARD)
DIN EN 14274:2004
Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS) (FOREIGN STANDARD)
DIN EN 14275:2003
Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers (FOREIGN STANDARD)
DIN EN 1428:1999
Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method (FOREIGN STANDARD)
DIN EN 1429:2009
Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving; German version EN 1429:2009 (Foreign Standard)
DIN EN 1430:2009
Bitumen and bituminous binders - Determination of particle polarity of bituminous emulsions; German version EN 1430:2009 (Foreign Standard)
DIN EN 1431:2009
Bitumen and bituminous binders - Determination of residual binder and oil distillate from bitumen emulsions by distillation; German version EN 1431:2009 (Foreign Standard)
DIN EN 14331:2004
Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillate fuels - Liquid chromatography (LC)/gas chromatography (GC) method (FOREIGN STANDARD)
DIN EN 14639:2005
Crude tar and crude benzole - Characteristics and test methods (FOREIGN STANDARD)
DIN EN 14678-2:2008
LPG equipment and accessories - Equipment for Liquefied Petroleum Gas automotive filling stations - Part 2: Components other than dispensers, and installation requirements; German version EN 14678-2:2007 (FOREIGN STANDARD)
DIN EN 1473:2007
Installation and equipment for liquefied natural gas - Design of onshore installations; German version EN 1473:2007 (FOREIGN STANDARD)
DIN EN 14733:2005
Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control (FOREIGN STANDARD)
DIN EN 1474-1:2009
Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms; German version EN 1474-1:2008 (Foreign Standard)
DIN EN 1474-2:2009
Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses; German version EN 1474-2:2008 (Foreign Standard)
DIN EN 1474-3:2009
Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 3: Offshore transfer systems; German version EN 1474-3:2008 (Foreign Standard)
DIN EN 14769:2006
Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV) (FOREIGN STANDARD)
DIN EN 14770:2006
Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR) (FOREIGN STANDARD)
DIN EN 14771:2005
Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR) (FOREIGN STANDARD)
DIN EN 14832:2005
Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids (FOREIGN STANDARD)
DIN EN 14833:2005
Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids (FOREIGN STANDARD)
DIN EN 14896:2006
Bitumen and bituminous binders - Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders - Rotating spindle viscometer method; German version EN 14896:2006 (FOREIGN STANDARD)
DIN EN 14998:2005
Derivatives from coal pyrolysis - Coal tar based oils: fluxing oils - Specifications and test methods (FOREIGN STANDARD)
DIN EN 15195:2007
Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber; German version EN 15195:2007 (FOREIGN STANDARD)
DIN EN 15199-1:2007
Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils; German version EN 15199-1:2006 (FOREIGN STANDARD)
DIN EN 15199-2:2007
Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels; German version EN 15199-2:2006 (FOREIGN STANDARD)
DIN EN 15199-3:2008
Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil; German version EN 15199-3:2008 (Foreign Standard)
DIN EN 1532:1997
Installations and equipment for liquefied natural gas - Ship-to-shore interface (FOREIGN STANDARD)
DIN EN 15323:2007
Bitumen and bituminous binders - Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT); German version EN 15323:2007 (FOREIGN STANDARD)
DIN EN 15469:2008
Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection; German version EN 15469:2007 (FOREIGN STANDARD)
DIN EN 15470:2008
Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method; German version EN 15470:2007 (FOREIGN STANDARD)
DIN EN 15471:2008
Liquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method; German version EN 15471:2007 (FOREIGN STANDARD)
DIN EN 15492:2009
Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method; German version EN 15492:2008 (Foreign Standard)
DIN EN 15536:2007
Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods; German version EN 15536:2007 (FOREIGN STANDARD)
DIN EN 15553:2007
Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method; German version EN 15553:2007 (FOREIGN STANDARD)
DIN EN 15691:2009
Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method; German version EN 15691:2009 (Foreign Standard)
DIN EN 15721:2009
Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and volatile impurities - Gas chromatographic method; German version EN 15721:2009 (Foreign Standard)
DIN EN 1601:1997
Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID) (FOREIGN STANDARD)
DIN EN 1776:1999
Gas supply systems - Natural gas measuring stations - Functional requirements (FOREIGN STANDARD)
DIN EN 1860-1/A1:2006
Appliances, solid fuels and firelighters for barbecuing - Part 1: Barbecues burning solid fuels - Requirements and test methods; German version EN 1860-1:2003/A1:2006 (FOREIGN STANDARD)
DIN EN 1860-1:2003
Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels; Requirements and test methods (FOREIGN STANDARD)
DIN EN 1860-2:2005
Appliances, solid fuels and firelighters for barbecueing - Part 2: Barbecue charcoal and barbecue charcoal briquettes - Requirements and test methods (FOREIGN STANDARD)
DIN EN 1860-3/A1:2006
Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecue appliances - Requirements and test methods; German version EN 1860-3:2003/A1:2006 (FOREIGN STANDARD)
DIN EN 1860-3:2003
Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecue appliances; Requirements and test methods; German version EN 1860-3:2003 (FOREIGN STANDARD)
DIN EN 1918-1:1998
Gas supply systems - gas - Part 1: Functional recommendations for storage in aquifers (FOREIGN STANDARD)
DIN EN 1918-2:1998
Gas supply systems - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields (FOREIGN STANDARD)
DIN EN 1918-3:1998
Gas supply systems - Underground gas storage - Part 3: Functional recommendations for storage in solution-mined salt cavities (FOREIGN STANDARD)
DIN EN 1918-4:1998
Gas supply systems - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns (FOREIGN STANDARD)
DIN EN 1918-5:1998
Gas supply systems - Underground gas storage - Part 5: Functional recommendations for surface facilities (FOREIGN STANDARD)
DIN EN 228:2008
Automotive fuels - Unleaded petrol - Requirements and test methods; German version EN 228:2008 (Foreign Standard)
DIN EN 23015:1994
Determination of cloud point of petroleum products (ISO 3015:1992) (FOREIGN STANDARD)
DIN EN 237:2004
Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry (FOREIGN STANDARD)
DIN EN 241:2000
Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method; English version of DIN EN 241 (FOREIGN STANDARD)
DIN EN 24260:1994
Determination of sulfur content in petroleum products and hydrocarbons by the Wickbold combustion method (ISO 4260:1987) (FOREIGN STANDARD)
DIN EN 27941:1993
Analysis of commercial propane and butane by gas chromatography (ISO 7941:1988) (FOREIGN STANDARD)
DIN EN 589:2008
Automotive fuels - LPG - Requirements and test methods; German version EN 589:2008 (Foreign Standard)
DIN EN 590 Berichtigung 1:2006
Automotive fuels - Diesel - Requirements and test methods; Corrigenda to DIN EN 590:2004-03 (FOREIGN STANDARD)
DIN V 51605:2006
Fuels for vegetable oil compatible combustion engines - Fuel from rapeseed oil - Requirements and test methods (Foreign Standard)
DIN-Fachbericht CEN/TR 15716:2008
Solid recovered fuels - Determination of combustion behaviour; English version CEN/TR 15716:2008 (FOREIGN STANDARD)
DIN Standards : DIN ICS 75 Petroleum And Related Technologies
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
