DIN  Standards : DIN ICS 49 Aircraft and Space Vehicle Engineering (Page 4)

DIN EN 3228:1993
Aerospace series; nuts, hexagon, plain, reduced height, normal across flats, in steel, cadmium plated; classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3226:1993
Aerospace series; nuts, hexagon, plain, normal height, normal across flats, in steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3225-4:1994
Aerospace series; heat resisting alloys produced from atomized powder, powder, compacted forging stock and and parts; technical specification; part 4: pre-production and production parts (FOREIGN STANDARD)
DIN EN 3225-3:1994
Aerospace series; heat resisting alloys produced from atomized powder, powder, compacted forging stock and and parts; technical specification; part 3: hot compacted forging stock (FOREIGN STANDARD)
DIN EN 3225-2:1994
Aerospace series; heat resisting alloys produced from atomized powder, powder, compacted forging stock and and parts; technical specification; part 2: atomized powder (FOREIGN STANDARD)
DIN EN 3225-1:1994
Aerospace series; heat resisting alloys produced from atomized powder, powder, compacted forging stock and and parts; technical specification; part 1: general requirements (FOREIGN STANDARD)
DIN EN 3220:1988
Aerospace series; heat resisting nickel base alloy (Ni-P101 HT); cold worked and softened; bar and wire for continuous forging or extrusion for fasteners 3 D 30 mm (FOREIGN STANDARD)
DIN EN 3219:1988
Aerospace series; heat resisting nickel base alloy (Ni-P100 HT); cold worked and softened; bar and wire for continuous forging or extrusion for fasteners 3 D 30 mm (FOREIGN STANDARD)
DIN EN 3218-011:2006
Aerospace series - Connectors, rectangular, with metallic shells and screws-locking - Part 011: Tool, insert extraction for EN 3218-005 to EN 3218-008 connectors - Product standard; German and English version EN 3218-011:2006 (FOREIGN STANDARD)
DIN EN 3218-010:2006
Aerospace series - Connectors, rectangular, with metallic shells and screws-locking - Part 010: Protective covers for EN 3218-006 and EN 3218-008 connectors - Product standard; German and English version EN 3218-010:2006 (FOREIGN STANDARD)
DIN EN 3218-009:2006
Aerospace series - Connectors, rectangular, with metallic shells and screws-locking - Part 009: Protective covers for EN 3218-005 and EN 3218-007 connectors - Product standard; German and English version EN 3218-009:2006 (FOREIGN STANDARD)
DIN EN 3218-008:2006
Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 008: Receptacle with rear-removable size 20 crimp contacts - Product standard; German and English version EN 3218-008:2006 (FOREIGN STANDARD)
DIN EN 3218-007:2006
Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 007: Plug with rear-removable size 20 crimp contacts - Product standard; German and English version EN 3218-007:2006 (FOREIGN STANDARD)
DIN EN 3218-006:2006
Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 006: Receptacle with non-removable size 22 solder contacts - Product standard; German and English version EN 3218-006:2006 (FOREIGN STANDARD)
DIN EN 3218-005:2006
Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 005: Plug with non-removable size 22 solder contacts - Product standard; German and English version EN 3218-005:2006 (FOREIGN STANDARD)
DIN EN 3218-002:2006
Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 002: Specification of performance and contact arrangements; German and English version EN 3218-002:2006 (FOREIGN STANDARD)
DIN EN 3218-001:2006
Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 001: Technical specification; German and English version EN 3218-001:2006 (FOREIGN STANDARD)
DIN EN 3212:1995
Aerospace series - Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution (FOREIGN STANDARD)
DIN EN 3207:1998
Aerospace series - Rubber compounds - Technical specification (FOREIGN STANDARD)
DIN EN 3202:1996
Aerospace series - Holes and traps for T-head bolts - Design standard (FOREIGN STANDARD)
DIN EN 3201:2009
Aerospace series - Holes for metric threaded fasteners - Design standard; German and English version EN 3201:2008 (Foreign Standard)
DIN EN 3199:1994
Aerospace series - Lead-acid batteries for aircraft - Technical specification (FOREIGN STANDARD)
DIN EN 3197:1994
Aerospace series; installation of aircraft electrical and optical interconnection systems (FOREIGN STANDARD)
DIN EN 3196:1994
Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3163:2007
Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, softened, forging stock a or D 300 mm; German and English version EN 3163:2007 (FOREIGN STANDARD)
DIN EN 3162:2007
Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, sheet and strip a 6 mm, R<(Index)m> 930 MPa; German and English version EN 3162:2007 (FOREIGN STANDARD)
DIN EN 3161:2007
Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D 200 mm, R<(Index)m> 930 MPa; German and English version EN 3161:2007 (FOREIGN STANDARD)
DIN EN 3160:2007
Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D 200 mm, R<(Index)m> 1310 MPa; German and English version EN 3160:2007 (FOREIGN STANDARD)
DIN EN 3155-075:2009
Aerospace series - Electrical contacts used in elements of connection - Part 075: Contacts, electrical, quadrax, size 8, female, type E, crimp, class R - Product standard; German and English version EN 3155-075:2009 (Foreign Standard)
DIN EN 3155-074:2009
Aerospace series - Electrical contacts used in elements of connection - Part 074: Contacts, electrical, quadrax, size 8, male, type E, crimp, class R - Product standard; German and English version EN 3155-074:2009 (Foreign Standard)
DIN EN 3155-071:2009
Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-071:2007 (Foreign Standard)
DIN EN 3155-070:2009
Aerospace series - Electrical contacts used in elements of connection - Part 070: Contacts, electrical, male, type A, crimp, class S - Product standard; German and English version EN 3155-070:2007 (Foreign Standard)
DIN EN 3155-069:2009
Aerospace series - Electrical contacts used in elements of connection - Part 069: Contacts, electrical, coaxial, size 16, female, type D, solder, class P - Product standard; English version prEN 3155-069:2008 (Foreign Standard)
DIN EN 3155-068:2009
Aerospace series - Electrical contacts used in elements of connection - Part 068: Contacts, electrical, coaxial, size 08, female, type D, solder, class R - Product standard; English version prEN 3155-068:2008 (Foreign Standard)
DIN EN 3155-067:2009
Aerospace series - Electrical contacts used in elements of connection - Part 067: Contacts, electrical, coaxial, size 08, male, type D, solder, class R - Product standard; English version prEN 3155-067:2008 (Foreign Standard)
DIN EN 3155-066:2007
Aerospace series - Electrical contacts used in elements of connection - Part 066: Contacts, electrical, female, type A, crimp, class S, size 8 - Product standard; German and English version EN 3155-066:2006 (FOREIGN STANDARD)
DIN EN 3155-065:2007
Aerospace series - Electrical contacts used in elements of connection - Part 065: Contacts, electrical, male, type A, crimp, class S, size 8 - Product standard; German and English version EN 3155-065:2006 (FOREIGN STANDARD)
DIN EN 3155-064:2009
Aerospace series - Electrical contacts used in elements of connection - Part 064: Contacts, electrical, coaxial, 50 ohms, size 1, female, type D, solder, class R - Product standard; German and English version EN 3155-064:2009 (Foreign Standard)
DIN EN 3155-063:2009
Aerospace series - Electrical contacts used in elements of connection - Part 063: Contacts, electrical, coaxial, 50 ohms, size 1, male, type D, solder, class R - Product standard; German and English version EN 3155-063:2009 (Foreign Standard)
DIN EN 3155-061:2007
Aerospace series - Electrical contacts used in elements of connection - Part 061: Contacts, electrical, coaxial, size 12, female, type D, solder, class R - Product standard; German and English version EN 3155-061:2006 (FOREIGN STANDARD)
DIN EN 3155-060:2007
Aerospace series - Electrical contacts used in elements of connection - Part 060: Contacts, electrical, coaxial, size 12, male, type D, solder, class R - Product standard; German and English version EN 3155-060:2006 (FOREIGN STANDARD)
DIN EN 3155-059:2007
Aerospace series - Electrical contacts used in elements of connection - Part 059: Contacts, electrical, coaxial, size 16, female, type D, solder, class R - Product standard; German and English version EN 3155-059:2006 (FOREIGN STANDARD)
DIN EN 3155-058:2007
Aerospace series - Electrical contacts used in elements of connection - Part 058: Contacts, electrical, coaxial, size 16, male, type D, solder, class R - Product standard; German and English version EN 3155-058:2006 (FOREIGN STANDARD)
DIN EN 3155-057:2007
Aerospace series - Electrical contacts used in elements of connection - Part 057: Contacts, electrical, female, thermocouple NiCr, type C, crimp, class T - Product standard; German and English version EN 3155-057:2006 (FOREIGN STANDARD)
DIN EN 3155-056:2007
Aerospace series - Electrical contacts used in elements of connection - Part 056: Contacts, electrical, male, thermocouple NiCr, type C, crimp, class T - Product standard; German and English version EN 3155-056:2006 (FOREIGN STANDARD)
Aerospace series - Anaerobic polymerisable compounds - Technical specification (FOREIGN STANDARD)
DIN EN 3792:1995
Aerospace series - Holes for 100? countersunk head screws - Design standard; German and English version EN 3782:2008 (Foreign Standard)
DIN EN 3782:2008
Aerospace series - Grooves for spiral wound retaining rings - Design standard; German and English version EN 3781:2008 (Foreign Standard)
DIN EN 3781:2008
Aerospace series - Polycarbonate sheet - Dimensions (FOREIGN STANDARD)
DIN EN 3779:2002
Aerospace series - Pins, quick release, two balls, double acting, single locking, "L" type handle, in corrosion resisting steel (FOREIGN STANDARD)
DIN EN 3778:1999
Aerospace series - Pins, quick release, single and double acting - Technical specification (FOREIGN STANDARD)
DIN EN 3777:1999
Aerospace series - Pins, quick release, two balls, single acting, single locking, "L" type handle, in corrosion resisting steel (FOREIGN STANDARD)
DIN EN 3776:1999
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I<(Index)n> - Part 004: UNC thread terminals; product standard (FOREIGN STANDARD)
DIN EN 3774-004:1999
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I<(Index)n> - Part 003: Metric thread terminals; product standard (FOREIGN STANDARD)
DIN EN 3774-003:1999
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 2 A to 25 A, switching capacity 65 I<(Index)n> - Part 001: Technical specification (FOREIGN STANDARD)
DIN EN 3774-001:1999
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 I<(Index)n>/1000 A max. - Part 004: UNC thread terminals; product standard (FOREIGN STANDARD)
DIN EN 3773-004:1999
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 I<(Index)n>/1000 A max. - Part 003: Metric thread terminals; product standard (FOREIGN STANDARD)
DIN EN 3773-003:1999
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 I<(Index)n>/1000 A max. - Part 001: Technical specification (FOREIGN STANDARD)
DIN EN 3773-001:1999
Aerospace series - Nuts, bihexagonal, plain, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3771:1999
Aerospace series - Electrolytic polishing of corrosion resistant steels and heat resisting alloys (FOREIGN STANDARD)
DIN EN 3769:1997
Aerospace series; nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3768:1993
Aerospace series - Rivets, blind, nut plate, 100? countersunk head, in heat resisting steel, passivated, metric series (FOREIGN STANDARD)
DIN EN 3767:1996
Aerospace series - Rivets, blind, nut plate, universal head, in heat resisting steel, passivated, metric series (FOREIGN STANDARD)
DIN EN 3766:1996
Aerospace series - Electrolytic silver plating for general use - Steels, heat resisting alloys, copper and copper alloys (FOREIGN STANDARD)
DIN EN 3765:1997
Aerospace series - Washers, concave, in heat resisting steel, passivated (FOREIGN STANDARD)
DIN EN 3764:1997
Aerospace series - Nuts, hexagonal, self-locking, ball seat, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3763:1997
Aerospace series - Heat resisting alloy FE-PA2601, softened and cold worked; wire for forged fasteners D 15 mm, 1100 MPa R<(Index)m> 1300 MPa (FOREIGN STANDARD)
DIN EN 3762:1994
Aerospace series - Heat resisting alloy FE-PA2601, softened and cold worked; bar for forged fasteners D 50 mm, 1100 MPa R<(Index)m> 1300 MPa (FOREIGN STANDARD)
DIN EN 3761:1994
Aerospace series - Screws, 100? countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3760:1996
Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3759:1996
Aerospace series - Simplex high speed data transmission system (FOREIGN STANDARD)
DIN EN 3758:1998
Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3757:1999
Aerospace series; nuts, anchor, self-locking, fixed, 60? corner, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3754:1993
Aerospace series; nuts, anchor, self-locking, fixed, 60? corner, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3753:1993
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 oC - Technical specification; German and English (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3752:2005
Aerospace series - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3751:1997
Aerospace series; nuts, anchor, self-locking, fixed, 90? corner, reduced series, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3750:1993
Aerospace series - O-ring grooves - Dimensions; German and English version EN 3748:2001 (FOREIGN STANDARD)
DIN EN 3748:2002
Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Technical specification; German and English version EN 3747:2007 (FOREIGN STANDARD)
DIN EN 3747:2008
Aerospace series - O-rings, in fluorosilicon rubber (FVMQ) - Hardness 80 IRHD; German and English version EN 3746:2007 (Foreign Standard)
DIN EN 3746:2008
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 705: Contrast measurement; German and English version EN 3745-705:2007 (Foreign Standard)
DIN EN 3745-705:2009
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 701: Strippability; German and English version EN 3745-701:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-701:2002
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 603: Nuclear radiation; German and English version EN 3745-603:2008 (Foreign Standard)
DIN EN 3745-603:2009
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 602: Toxicity; German and English version EN 3745-602:2008 (Foreign Standard)
DIN EN 3745-602:2009
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density; German and English version EN 3745-601:2007 (Foreign Standard)
DIN EN 3745-601:2009
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 514: Cable twist bend; English version prEN 3745-514:2008 (Foreign Standard)
DIN EN 3745-514:2009
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance; German and English version EN 3745-513:2005 (FOREIGN STANDARD)
DIN EN 3745-513:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure endurance; German and English version EN 3745-512:2005 (FOREIGN STANDARD)
DIN EN 3745-512:2006
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable to cable abrasion; German and English version EN 3745-511:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-511:2002
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 510: Bending test; German and English version EN 3745-510:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-510:2003
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 509: Kink test; German and English version EN 3745-509:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-509:2003
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 508: Torsion; German and English version EN 3745-508:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-508:2003
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 507: Cut-through; German and English version EN 3745-507:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-507:2003
Aerospace series - Fibres and cables, optical, aircraft use; test methods - Part 506: Impact resistance (FOREIGN STANDARD)
DIN EN 3745-506:2000
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength; German and English version EN 3745-505:2007 (Foreign Standard)
DIN EN 3745-505:2009
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 504: Micro bending test; German and English version EN 3745-504:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-504:2003
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion; German and English version EN 3745-503:2005 (FOREIGN STANDARD)
DIN EN 3745-503:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile strength for short length of optical fibres; German and English version EN 3745-502:2005 (FOREIGN STANDARD)
DIN EN 3745-502:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 501: Optical fibre proof test; German and English version EN 3745-501:2005 (FOREIGN STANDARD)
DIN EN 3745-501:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance; German and English version EN 3745-412:2005 (FOREIGN STANDARD)
DIN EN 3745-412:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluids; German and English version EN 3745-411:2007 (FOREIGN STANDARD)
DIN EN 3745-411:2008
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life; German and English version EN 3745-410:2007 (Foreign Standard)
DIN EN 3745-410:2009
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 407: Flammability; German and English version EN 3745-407:2005 (FOREIGN STANDARD)
DIN EN 3745-407:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test; German and English version EN 3745-406:2005 (FOREIGN STANDARD)
DIN EN 3745-406:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock; German and English version EN 3745-404:2005 (FOREIGN STANDARD)
DIN EN 3745-404:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling; German and English version EN 3745-402:2005 (FOREIGN STANDARD)
DIN EN 3745-402:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing; German and English version EN 3745-401:2005 (FOREIGN STANDARD)
DIN EN 3745-401:2006
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling; German and English version EN 3745-306:2005 (FOREIGN STANDARD)
DIN EN 3745-306:2006
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 305: Immunity to ambient light coupling; German and English version EN 3745-305:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-305:2003
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 303: Bandwidth; German and English version EN 3745-303:2007 (Foreign Standard)
DIN EN 3745-303:2009
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 302: Numerical aperture; German and English version EN 3745-302:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-302:2003
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 301: Attenuation; German and English version EN 3745-301:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-301:2003
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 205: Cable longitudinal dimensional stability; German and English version EN 3745-205:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-205:2003
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 203: Cable dimensions; German and English version EN 3745-203:2008 (Foreign Standard)
DIN EN 3745-203:2009
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions; German and English version EN 3745-202:2005 (FOREIGN STANDARD)
DIN EN 3745-202:2006
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 201: Visual examination; German and English version EN 3745-201:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3745-201:2003
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 100: General; German and English version EN 3745-100:2008 (Foreign Standard)
DIN EN 3745-100:2009
Aerospace series; straight pins, spring type, light duty, in corrosion resisting spring steel, passivated (FOREIGN STANDARD)
DIN EN 3744:1993
Aerospace series; straight pins, spring type, heavy duty, in corrosion resisting spring steel, passivated (FOREIGN STANDARD)
DIN EN 3743:1993
Aerospace series - Nuts, clip, metric - Installation holes and assembly; German and English version EN 3741:2004 (FOREIGN STANDARD)
DIN EN 3741:2005
Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3740:1996
Aerospace series; rivets, solid, 100? normal countersunk head, in titanium alloy Ti 45,5 Cb; metric series (FOREIGN STANDARD)
DIN EN 3739:1992
Aerospace series; rivets, solid, 100? normal countersunk head with dome, in titanium alloy Ti 45,5 Cb; metric series (FOREIGN STANDARD)
DIN EN 3738:1992
Aerospace series - Titanium alloy TI-P65002 - Not heat treated, grade 2 forging stock for solution treated and aged forgings a or D 360 mm (FOREIGN STANDARD)
DIN EN 3737:1996
Aerospace series - Titanium alloy TI-P65002 - Grade 2, solution treated and aged, forgings D<(Index)e> 75 mm (FOREIGN STANDARD)
DIN EN 3736:1996
Aerospace series - Titanium alloy TI-P65002, solution treated and aged; bar for machining D 75 mm (FOREIGN STANDARD)
DIN EN 3735:1994
DIN EN 3733-108:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 108: Cable support boot - Product standard; German and English version EN 3733-108:2008 (Foreign Standard)
DIN EN 3733-108:2008
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 106: Receptacle connector dummy jam nut - Product standard; German and English version EN 3733-106:2008 (Fo
DIN EN 3733-106:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 106: Receptacle connector dummy jam nut - Product standard; German and English version EN 3733-106 (Foreign
DIN EN 3733-106:2008
DIN EN 3733-105:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 105: Receptacle connector dummy two holes fixing - Product standard; German and English version EN 3733-105
DIN EN 3733-105:2008
DIN EN 3733-104:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 104: Receptacle connector dummy four holes fixing - Product standard; German and English Version EN 3733-10
DIN EN 3733-104:2008
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 103: Protective cover jam nut receptacle - Product standard; German and English version EN 3733-103:2008 (F
DIN EN 3733-103:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 101: Protective cover receptacle - Product standard; German and English version EN 3733-101:2008 (Foreign S
DIN EN 3733-101:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 009: Receptacle sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3733-009:2007
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 008: Plug sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Pr (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3733-008:2007
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 ?C continuous - Part 007: Ferrule (optical contact) for EN 4532 (200 ?m/280 ?m fibre) - Product standard; German and English ver
DIN EN 3733-007:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 ?C continuous - Part 006: Receptable, connector, jam nut fixing for cable according to EN 4532 - Product standard; German and English
DIN EN 3733-006:2008
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 ?C continuous - Part 005: Receptacle, connector, two hole fixing cable according to EN 4532 - Product standard; German and English ver
DIN EN 3733-005:2008
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 ?C continuous - Part 004: Receptacle, connector, four hole fixing cable to EN 4532, Product standard; German and English version EN 37
DIN EN 3733-004:2009
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 ?C continuous - Part 003: Plug connector for cable according to EN 4532 - Product standard; German and English version EN 3733-003:200
DIN EN 3733-003:2008
Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 ?C continuous - Part 002: List of product standards; German and English version EN 3733-002:2008 (Foreign Standard)
DIN EN 3733-002:2008
Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses; German and English version EN 3730:2001 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3730:2003
Aerospace series - Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated; German and English version EN 3729:2008 (Foreign Standard)
DIN EN 3729:2008
Aerospace series - Shaft-nuts, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated; German and English version EN 3728:2008 (Foreign Standard)
DIN EN 3728:2008
Aerospace series - Bearings, airframe rolling rigid with flanged alignment housing - Technical specification; German and English version EN 3727:2006 (FOREIGN STANDARD)
DIN EN 3727:2007
Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 oC; German and English version EN 3726:2004 (FOREIGN STANDARD)
DIN EN 3726:2005
Aerospace series - Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature); German and English version EN 3725:2004 (FOREIGN STANDARD)
DIN EN 3725:2005
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature); German and English version EN 3724:2004 (FOREIGN STANDARD)
DIN EN 3724:2005
Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3723:1996
Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3722:1995
Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3721:1995
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3720:1995
Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard; German and English version EN 3719:2005 (FOREIGN STANDARD)
DIN EN 3719:2006
Aerospace series - Test method for metallic materials - Ultrasonic inspection of tubes (FOREIGN STANDARD)
DIN EN 3718:1996
Aerospace series - Tubes - Selection for engines fluid systems; German and English version EN 3717:2008 (Foreign Standard)
DIN EN 3717:2008
Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 006: Crimp plug - Product standard; German and English version EN 3716-006:2006 (FOREIGN STANDARD)
DIN EN 3716-006:2008
Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 005: Crimp receptacle - Product standard; German and English version EN 3716-005:2006 (FOREIGN STANDARD)
DIN EN 3716-005:2008
Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 004: Solder plug - Product standard; German and English version EN 3716-004:2006 (FOREIGN STANDARD)
DIN EN 3716-004:2007
Aerospace series - Connectors, single-way with traxial interface, for transmission of digital data - Part 003: Solder receptacle - Product standard; German and English version EN 3716-003:2006 (FOREIGN STANDARD)
DIN EN 3716-003:2007
Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 002: Conditions of use and list of product standards; German and English version EN 3716-002:2006 (FOREIGN STANDARD)
DIN EN 3716-002:2007
Aerospace series - Connector, single-way, with triaxial interface, for transmission of digital data - Part 001: Technical specification; German and English version EN 3716-001:2006 (FOREIGN STANDARD)
DIN EN 3716-001:2007
Aerospace series; nuts, anchor, self-locking, floating, two lug, with counterbore, in heat resisting steel, silver plated; classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3714:1993
Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset; German and English version EN 3711:2008 (Foreign Standard)
DIN EN 3711:2008
Aerospace series - Sockets, bi-hexagonal - Technical specification; German and English version EN 3710:2008 (Foreign Standard)
DIN EN 3710:2008
Aerospace series - Wrenches and sockets, bi-hexagonal - Technical specification; German and English version EN 3709:2006 (FOREIGN STANDARD)
DIN EN 3709:2007
Aerospace series - Modular interconnection systems - Terminal junction systems - Part 005: Frames with accessories for feedback modules version, sealed and unsealed - Product standard; German and English version EN 3708-005:2006 (FOREIGN STANDARD)
DIN EN 3708-005:2007
Aerospace series - Modular interconnection systems - Terminal junction systems - Part 004: Removable feedback modules version, unsealed - Product standard; German and English version EN 3708-004:2006 (FOREIGN STANDARD)
DIN EN 3708-004:2007
Aerospace series - Modular interconnection systems - Terminal junction systems - Part 003: Removable feedback modules version, sealed - Product standard; German and English version EN 3708-003:2006 (FOREIGN STANDARD)
DIN EN 3708-003:2007
Aerospace series - Modular interconnection systems - Terminal junction systems - Part 002: Performance specification; German and English version EN 3708-002:2006 (FOREIGN STANDARD)
DIN EN 3708-002:2007
Aerospace series - Modular interconnection systems - Terminal junction systems - Part 001: Technical specification; German and English version EN 3708-001:2006 (FOREIGN STANDARD)
DIN EN 3708-001:2007
Aerospace series - Heat release rate for materials and products under the influence of radiating heat and flames - Test method (FOREIGN STANDARD)
DIN EN 3703:1995
Aerospace series; static inverters for aircraft; technical specification (FOREIGN STANDARD)
DIN EN 3700:1993
Aerospace series - Washers in heat resisting steel; German and English version EN 3696:2001 (FOREIGN STANDARD)
DIN EN 3696:2003
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa/650 ?C; German and English version EN 3686:2008 + AC:2009 (Foreign Standard)
DIN EN 3686:2009
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa/650 ?C; German and English version EN 3686:2008 (Foreign Standard)
DIN EN 3686:2008
Aerospace series - Bolts in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa/650 ?C - Technical specification; German and English version EN 3685:2008 (Foreign Standard)
DIN EN 3685:2008
Aerospace series - Test methods - Titanium alloy wrought products - Determination of transus temperature - Metallographic method; German and English version EN 3684:2007 (FOREIGN STANDARD)
DIN EN 3684:2007
Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary content - Point count method and line intercept method; German and English version EN 3683:2007 (FOREIGN STANDARD)
DIN EN 3683:2007
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 009: Size 4 plug - Product standard; German and En (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-009:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 008: Size 4 receptacle - Product standard; German (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-008:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 007: Size 3 plug - Product standard; German and En (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-007:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 006: Size 3 receptacle - Product standard; German (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-006:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 005: Size 2 plug - Product standard; German and En (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-005:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 004: Size 2 receptacle - Product standard; German (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-004:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 003: Inserts - Product standard; German and Englis (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-003:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 002: Specification of performance and contact arra (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-002:2008
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 ?C continuous - Part 001: Technical specification; German and English v (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3682-001:2008
Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) air melted, solution treated - Seamless tube for pressure applications D 50 mm; 0,5 mm a 5 mm, 500 MPa R<(Index)m> 750 MPa (FOREIGN STANDARD)
DIN EN 3680:1998
Aerospace series - Steel FE-PM3902 (X7CrNiAl17-7) air melted, solution treated and precipitation hardened - Plate, 6 mm a 15 mm, 1240 MPa R<(Index)m> 1450 MPa (FOREIGN STANDARD)
DIN EN 3679:1998
Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D 200 mm - R<(Index)m> 930 MPa; German and English version EN 3678:2007 (FOREIGN STANDARD)
DIN EN 3678:2007
Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D 200 mm - R<(Index)m> 1 310 MPa; German and English version EN 3677:2007 (FOREIGN STANDARD)
DIN EN 3677:2007
Aerospace series - Inserts, thin wall, self-locking - Design standard (FOREIGN STANDARD)
DIN EN 3676:1998
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30? swage - Classification: 1210 MPa (at ambient temperature)/730 ?C; German and English version EN 3672:2008 (Foreign Standard)
DIN EN 3672:2008
Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D 250 mm; German and English version EN 3671:2007 (FOREIGN STANDARD)
DIN EN 3671:2007
Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) - Non heat treated - Forging stock - a or D 250 mm; German and English version EN 3668:2006 (FOREIGN STANDARD)
DIN EN 3668:2007
Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked; bar for forged fasteners D 50 mm, 1550 MPa R<(Index)m> 1830 MPa (FOREIGN STANDARD)
DIN EN 3666:1996
Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys (FOREIGN STANDARD)
DIN EN 3665:1997
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus-bar version - Product standard; German and English version EN 3662-006:2006 (FOREIGN STANDARD)
DIN EN 3662-006:2008
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard; German and English version EN 3662-005:2006 (FOREIGN STANDARD)
DIN EN 3662-005:2008
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 001: Technical specification; German and English version EN 3662-001:2006 (FOREIGN STANDARD)
DIN EN 3662-001:2008
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus bar version - Product standard; German and English version EN 3661-006:2006 (FOREIGN STANDARD)
DIN EN 3661-006:2008
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard; German and English version EN 3661-005:2006 (FOREIGN STANDARD)
DIN EN 3661-005:2008
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 001: Technical specification; German and English version EN 3661-001:2006 (FOREIGN STANDARD)
DIN EN 3661-001:2008
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 027: Cable outlet, style A , 45?, unsealed, with cable tie strain relief for EN 3646 - Product standard; English version prEN 3660-027:2008 (
DIN EN 3660-027:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 026: Cable outlet, style A , 90?, unsealed, with cable tie strain relief for EN 3646 - Product standard; English version prEN 3660-026:2008 (
DIN EN 3660-026:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 025: Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN 3646 - Product standard; English version prEN 3660-025:20
DIN EN 3660-025:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 024: Grommet nut, style A, composite - Product standard; German and English version EN 3660-024:2008 (Foreign Standard)
DIN EN 3660-024:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 023: Cable outlet, style A, 90 , composite, unsealed, with cable tie strain relief - Product standard; German and English version EN 3660-023
DIN EN 3660-023:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 022: Cable outlet, style A, straight, composite, unsealed, with cable tie strain relief - Product standard; German and English version EN 366
DIN EN 3660-022:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 019: Cable outlet, style A, 45?, unsealed, with cable tie strain relief - Product standard; English version prEN 3660-019:2008 (Foreign Stand
DIN EN 3660-019:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 018: Cable outlet, style A, 90?, unsealed, with cable tie strain relief - Product standard; English version prEN 3660-018:2008 (Foreign Stand
DIN EN 3660-018:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 017: Cable outlet, style A, straight, unsealed, with cable tie strain relief - Product standard; English version prEN 3660-017:2008 (Foreign
DIN EN 3660-017:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 015: Cable outlet, style A, 45?, unsealed, with cable tie strain relief - Product standard; German and English version EN 3660-015:2008 (Fore
DIN EN 3660-015:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 014: Cable outlet, style A, 90?, unsealed, with cable tie strain relief - Product standard; German and English version EN 3660-014:2008 (Fore
DIN EN 3660-014:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 013: Cable outlet, style A, straight, unsealed, with cable tie strain relief - Product standard; German and English version EN 3660-013:2008
DIN EN 3660-013:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 012: Grommet nut, style A for EN 3372 - Product standard; German and English version EN 3660-012:2008 (Foreign Standard)
DIN EN 3660-012:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 009: Cable outlet, style J, straight, sealed, for heat shrinkable boot - Product standard; German and English version EN 3660-009:2007 (Forei
DIN EN 3660-009:2008
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 008: Cable outlet, style C, 45?, shielded (cone grounding), unsealed with clamp strain relief - Product standard; German and English version
DIN EN 3660-008:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 007: Cable outlet, style C, 90?, shielded (cone grounding), unsealed with clamp strain relief - Product standard; German and English version
DIN EN 3660-007:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 006: Cable outlet, style C, straight, shielded (cone grounding), unsealed with clamp strain relief - Product standard; German and English ver
DIN EN 3660-006:2009
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90? unsealed, with clamp strain relief for EN 2997 and EN 4967 - Product sta (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3660-005:2007
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: cable outlet, style A, straight, unsealed with clamp strain relief for EN 2997 and EN 4067 - Produc (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3660-004:2007
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A for EN 2997 and EN 4067 - Product standard; German and English version EN 3660-003:2006 (FOREIGN STANDARD)
DIN EN 3660-003:2007
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 002: Index of product standards; German and English version EN 3660-002:2006 (FOREIGN STANDARD)
DIN EN 3660-002:2007
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification; German and English version EN 3660-001:2006 (FOREIGN STANDARD)
DIN EN 3660-001:2007
Aerospace series - Polycarbonate, self-extinguishing, low smoke emission - Characteristics (FOREIGN STANDARD)
DIN EN 3656:2002
Aerospace series; nuts, anchor, self-locking, floating, self-aligning, on lug, in steel, cadmium plated, MoS<(Index)2> lubricated; classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3653:1993
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ?C or 200 ?C continuous - Part 011: Dummy receptacle - Product standard; German and English version EN 3646-011:2006 (FOREIGN STANDARD)
DIN EN 3646-011:2007
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ?C or 200 ?C continuous - Part 010: Protective cover for plug - Product standard; German and English version EN 3646-010:2006 (FOREIGN STANDARD)
DIN EN 3646-010:2007
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ?C or 200 ?C continuous - Part 009: Protective cover for receptacle - Product standard; German and English version EN 3646-009:2006 (FOREIGN STANDARD)
DIN EN 3646-009:2007
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ?C or 200 ?C continuous - Part 008: Plug - Product standard; German and English version EN 3646-008:2006 (FOREIGN STANDARD)
DIN EN 3646-008:2007
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ?C or 200 ?C continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard; G (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3646-007:2007
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ?C or 200 ?C continuous - Part 006: Receptacle, hermetic, jam-nut mounting - Product standard; German and English version EN 3646-006:2006 (FOREIGN STANDARD)
DIN EN 3646-006:2007
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ?C or 200 ?C continuous - Part 005: Receptacle, hermetic, square flange mounting - Product standard; German and English v (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3646-005:2007
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ?C or 200 ?C continuous - Part 004: Receptacle, jam-nut mounting - Product standard; German and English version EN 3646-004:2006 (FOREIGN STANDARD)

DIN  Standards : DIN ICS 49 Aircraft and Space Vehicle Engineering (Page 4)