DIN Standards : DIN ICS 49 Aircraft and Space Vehicle Engineering (Page 3)
DIN EN 3035:1996
Aerospace series - Nuts, self-locking, hexagonal, with captive washer - In heat resisting steel FE-PA92HT (A286), silver coated - Classification 1100 MPa/425 ?C; German and English version EN 3034:2009 (Foreign Standard)
DIN EN 3034:2009
Aerospace series - Nuts, self-locking, hexagonal with captive washer, in heat resisting steel FE-PA2601 (A286), uncoated - Classification: 1100 MPa/425 ?C; German and English version EN 3033:2008 (Foreign Standard)
DIN EN 3033:2008
Aerospace series; test method for dry film lubricants; thickness measurement (FOREIGN STANDARD)
DIN EN 3032:1994
Aerospace series; test method for dry film lubricants; solids content (FOREIGN STANDARD)
DIN EN 3030:1994
Aerospace series; test method for dry film lubricants; salt spray test (FOREIGN STANDARD)
DIN EN 3027:1994
Aerospace series; test method for dry film lubricants; corrosion test on steels specimens (FOREIGN STANDARD)
DIN EN 3026:1994
Aerospace series - Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286), silver-plated - Classification: 1 100 MPa (at ambient temperature)/650 ?C; German and English version EN 3020:2008 (Foreign Standard)
DIN EN 3020:2008
Aerospace series - Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286) - Classification: 1 100 MPa (at ambient temperature)/650 ?C; German and English version EN 3019:2008 (Foreign Standard)
DIN EN 3019:2008
Aerospace series - Washers, facing/packing - Heat resisting steel; German and English version EN 3017:2008 (FOREIGN STANDARD)
DIN EN 3017:2008
Aerospace series - Washers countersunk, load spreading - Heat resisting steel; German and English version EN 3016:2008 (Foreign Standard)
DIN EN 3016:2008
Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 3015:2001
Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 3014:2001
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy); classification: 1210 MPa (at ambient temperature)/730 ?C (FOREIGN STANDARD)
DIN EN 3012:1995
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa/730 ?C (FOREIGN STANDARD)
DIN EN 3011:1998
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification 1210 MPa/730 ?C (FOREIGN STANDARD)
DIN EN 3010:1998
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa/650 ?C, silver plated (FOREIGN STANDARD)
DIN EN 3009:1998
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa/650 ?C (FOREIGN STANDARD)
DIN EN 3008:1998
Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 3007:1996
Aerospace series - Screws, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 3006:1994
Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated - Classification: 1210 MPa (at ambient temperature)/730 oC - Technical specificatio (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3005:2005
Aerospace series - Nuts, self-locking, MJ theads, in heat resisting steel FE-PA2601 (A286); classification: 1100 MPa (at ambient temperature)/650 ?C; technical specification (FOREIGN STANDARD)
DIN EN 3004:1997
Aerospace series; tempered float glass plies for aircraft applications; technical specification (FOREIGN STANDARD)
DIN EN 3001:1993
Aerospace series - Washers, flat, in heat resisting steel, passivated (FOREIGN STANDARD)
DIN EN 2998:1996
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ?C to 175 ?C continuous, 200 ?C continuous, 260 ?C peak - Part 013: O-ring seal for jam-nut receptacles - Produ
DIN EN 2997-013:2009
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ?C to 175 ?C continuous, 200 ?C continuous, 260 ?C peak - Part 012: Jam-nut for jam-nut receptacles - Product s
DIN EN 2997-012:2009
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ?C to 175 ?C continuous, 200 ?C continuous, 260 ?C peak - Part 005: Hermet (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2997-005:2008
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ?C to 175 ?C continuous, 200 ?C continuous, 260 ?C peak - Part 004: Jam-nu (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2997-004:2008
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ?C to 175 ?C continuous, 200 ?C continuous, 260 ?C peak - Part 003: Square (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2997-003:2008
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ?C to 175 ?C continuous, 200 ?C continuous, 260 ?C peak - Part 002: Specif (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2997-002:2008
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 ?C to 175 ?C continuous, 200 ?C continuous, 260 ?C peak - Part 001: Techni (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2997-001:2008
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact - Product standard; German and English version EN 2996-005:2006 (Foreign Standard)
DIN EN 2996-005:2009
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 - Part 005: With polarized signal contact - Product standard; German and English version EN 2996-005:2006 (FOREIGN STANDARD)
DIN EN 2996-005:2008
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 004: With signal contact - Product standard; German and English version EN 2996-004:2006 (FOREIGN STANDARD)
DIN EN 2996-004:2008
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 001: Technical specification; German and English version EN 2996-001:2006 (FOREIGN STANDARD)
DIN EN 2996-001:2008
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact - Product standard; German and English version EN 2995-005-2006 (FOREIGN STANDARD)
DIN EN 2995-005:2007
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 004: With signal contact - Product standard; German and English version EN 2995-004:2006 (FOREIGN STANDARD)
DIN EN 2995-004:2007
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 001: Technical specification; German and English version EN 2995-001:2006 (FOREIGN STANDARD)
DIN EN 2995-001:2007
Aerospace series - Nickel-cadmium batteries - Of format F type (FOREIGN STANDARD)
DIN EN 2993:1996
Aerospace series - Nickel-cadmium batteries - Of format E type (FOREIGN STANDARD)
DIN EN 2991:1996
Aerospace series - Nickel-cadmium batteries of format D type (FOREIGN STANDARD)
DIN EN 2988:1996
Aerospace series - Nickel-cadmium batteries of format C type (FOREIGN STANDARD)
DIN EN 2987:1996
Aerospace series - Nickel-cadmium batteries - Of format B type (FOREIGN STANDARD)
DIN EN 2986:1996
Aerospace series - Nickel-cadmium batteries of format A type (FOREIGN STANDARD)
DIN EN 2985:1996
Aerospace series - Carbon fibre filament yarn (Polyacrylonitrile precursor) - Technical specification (FOREIGN STANDARD)
DIN EN 2962:1996
Aerospace series - Heat resisting alloy NI-PH2601, solution treated; bar for machined fasteners D 50 mm, R<(Index)m> 1270 MPa (FOREIGN STANDARD)
DIN EN 2961:1994
Aerospace series; heat resisting nickel base alloy (Ni-P101 HT); cold worked and solution treated; bar for machining for fasteners 3 D 50 mm (FOREIGN STANDARD)
DIN EN 2960:1988
Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al), solution treated and cold worked - Bar for forged fasteners 3 mm D 30 mm (FOREIGN STANDARD)
DIN EN 2959:2000
Aerospace series; recycling of titanium and titanium alloy scrap (FOREIGN STANDARD)
DIN EN 2955:1993
Aerospace series - Recycling of titanium and titanium alloy scrap (FOREIGN STANDARD)
DIN EN 2955/A1:1995
Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked; bar for forged fasteners D 50 mm, 1270 MPa R<(Index)m> 1550 MPa (FOREIGN STANDARD)
DIN EN 2952:1996
Aerospace series - Metallic materials - Test method; micrographic determination of content of non-metallic inclusions (FOREIGN STANDARD)
DIN EN 2951:1998
Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects; German and English version EN 2950:2008 (Foreign Standard)
DIN EN 2950:2009
Aerospace series - Washers, wire locking, in corrosion resisting steel - passivated (FOREIGN STANDARD)
DIN EN 2949:1996
Aerospace series - Washers, tab, in heat resisting steel, passivated (FOREIGN STANDARD)
DIN EN 2948:1996
Aerospace series - Steel FE-PA3004 (X10CrNi18-09) - Air melted - Non heat treated - Cold drawn wire - a or D 2,3 mm; German and English version EN 2947:2006 (FOREIGN STANDARD)
DIN EN 2947:2007
Aerospace series - Inserts, screw thread, helical coil, self-locking - Assembly procedure (FOREIGN STANDARD)
DIN EN 2945:1998
Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting alloy FE-PA3004 (FOREIGN STANDARD)
DIN EN 2944:1998
Aerospace series - Inserts, screw thread, helical coil, self-locking - Technical specification (FOREIGN STANDARD)
DIN EN 2943:1998
Aerospace series - Insert, screw thread, helical coil, self-locking, in head resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated (FOREIGN STANDARD)
DIN EN 2942:1998
Aerospace series - Nickel alloy rivets - Technical specification; German and English version EN 2941:2008 (Foreign Standard)
DIN EN 2941:2009
Aerospace series - Screws, 100? countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2940:1995
Aerospace series - Screws, 100? countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2939:1994
Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2938:1995
Aerospace series - Screws, hexagon-head, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2937:1994
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa (at ambient temperature)/730 ?C (FOREIGN STANDARD)
DIN EN 2936:1996
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ?C (FOREIGN STANDARD)
DIN EN 2935:1996
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2934:1996
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2933:1996
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2932:1996
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2931:1994
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperatur)/730 ?C (FOREIGN STANDARD)
DIN EN 2930:1996
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ?C (FOREIGN STANDARD)
DIN EN 2929:1996
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2928:1996
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2927:1996
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2926:1996
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2925:1994
Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated, left hand thread; classification: 600 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 2924:1997
Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, silver plated - Classification: 600 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 2923:1997
Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated, left hand thread; Classification: 600 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2922:1997
Aerospace series - Washers, flat, large diameter, in heat resisting steel, passivated (FOREIGN STANDARD)
DIN EN 2914:1996
Aerospace series - Washers, flat, large diameter, in steel, cadmium plated (FOREIGN STANDARD)
DIN EN 2913:2000
Aerospace series - Washers, flat, large diameter, in aluminium alloy, anodized or chromated (FOREIGN STANDARD)
DIN EN 2912:1996
Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2911:1995
Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2910:1994
Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2909:1995
Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2908:1994
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2907:1995
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2906:1994
Aerospace series - Vulcanized rubbers - Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers (FOREIGN STANDARD)
DIN EN 2899:1997
Aerospace series - Corrosion and heat resisting steel rivets - Technical specification; German and English version EN 2898:2008 (Foreign Standard)
DIN EN 2898:2009
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa/235 ?C (FOREIGN STANDARD)
DIN EN 2897:1996
Aerospace series; nuts, hexagonal, plain, normal height, normal across flats, in corrosion resisting steel, passivated; classification: 900 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 2895:1994
Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting nickel base alloy, passivated, MoS<(Index)2> lubricated; classification: 1550 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2894:1995
Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 ?C; German and English version EN 2889:2006 (FOREIGN STANDARD)
DIN EN 2889:2007
Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 ?C; German and English (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2888:2007
Aerospace series - bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 2887:1995
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa/235 ?C (FOREIGN STANDARD)
DIN EN 2886:1996
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated, classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2885:1996
Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2884:1996
Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2883:1995
Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 ?C; German and English v (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2882:2008
Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa ( (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2881:2007
Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/120 ?C (FOREIGN STANDARD)
DIN EN 2880:1998
Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2879:1998
Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2878:1998
Aerospace series - Nuts, hexagon, plain, reduced height, normal across flats, in aluminium alloy, anodized - Classification: 450 MPa (at ambient temperature)/120 ?C (FOREIGN STANDARD)
DIN EN 2876:1995
Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2874:1996
Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2870:1996
Aerospace series; nuts, hexagonal, slotted/castellated; normal height, normal across flats, in heat resisting steel, silver passivated; classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2869:1993
Aerospace series; nuts, hexagonal, slotted/castellated; normal height, normal across flats, in heat resisting steel, silver plated; classification: 1100 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2868:1993
Aerospace series; nuts, anchor, self-locking, floating, one lug, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2867:1993
Aerospace series; nuts, anchor, self-locking, floating, one lug, with counterbore, in steel, cadmium plated, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2866:1993
Aerospace series; nuts, anchor, self-locking, floating, two lug, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2865:1993
Aerospace series; nuts, anchor, self-locking, fixed, 90? corner, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 2863:1993
Aerospace series; nuts, anchor, self-locking, fixed, 90? corner, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 2862:1993
Aerospace series; heat resisting alloys; forging stock and forgings; technical specification; part 3: pre-production and production forgings (FOREIGN STANDARD)
DIN EN 2860-3:1994
Aerospace series; heat resisting alloys; forging stock and forgings; technical specification; part 2: forging stock (FOREIGN STANDARD)
DIN EN 2860-2:1994
Aerospace series; heat resisting alloys; forging stock and forgings; technical specification; part 1: general requirements (FOREIGN STANDARD)
DIN EN 2860-1:1994
Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1100 MPa (at ambient temperature)/235 ?C; German and English (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2859:2008
Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 3: pre-production and production forgings (FOREIGN STANDARD)
DIN EN 2858-3:1994
Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 2: forging stock (FOREIGN STANDARD)
DIN EN 2858-2:1994
Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 1: general requirements (FOREIGN STANDARD)
DIN EN 2858-1:1994
Aerospace series - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore - Classification: 1100 MPa/235 ?C; German and English version EN 2856:2006 (FOREIGN STANDARD)
DIN EN 2856:2007
Aerospace series - Cables, electrical for general purpose - Cross sections equal to and greater than 9 mm <(hoch)2> - Operating temperatures between -55 ?C and 260 ?C - Part 003: Product standard; German and English version EN 2854-003:2009 (Foreign Stand
DIN EN 2854-003:2009
Aerospace series - Cables, electrical, for general purposes - Cross sections equal to and greater than 9 mm<(hoch)2>; operating temperatures between -55 ?C and 260 ?C - Part 002: General (FOREIGN STANDARD)
DIN EN 2854-002:1996
Aerospace series - Current ratings for electrical cables with conductor EN 2083; German and English version EN 2853:2005 (FOREIGN STANDARD)
DIN EN 2853:2006
Aerospace series - Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction (FOREIGN STANDARD)
DIN EN 2850:1998
Aerospace series - Glass fibre thermosetting preimpregnates; technical specification - Part 4: Unidirectional glass/epoxy resin preimpregnate curing at up to 125 ?C for continuous use up to 80 ?C (FOREIGN STANDARD)
DIN EN 2833-4:1998
Aerospace series - Glass fibre thermosetting preimpregnates; technical specification - Part 3: Glass fabric/epoxy resin preimpregnates curing at up to 180 ?C for continous use up to 120 ?C (FOREIGN STANDARD)
DIN EN 2833-3:1998
Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 2: Glass fabric/Epoxy resin preimpregnates curing at up to 125 ?C for continous use up to 80 ?C (FOREIGN STANDARD)
DIN EN 2833-2:1995
Aerospace series - Glass fibre thermosetting preimpregnates; technical specification - Part 1: General requirements (FOREIGN STANDARD)
DIN EN 2833-1:1998
Aerospace series - Adhesion test for metallic coatings by shot peening (FOREIGN STANDARD)
DIN EN 2829:1995
Aerospace series - Fibre reinforced plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics (FOREIGN STANDARD)
DIN EN 2823:1999
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D 200 mm - R<(Index)m> 1310 MPa; German a (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 2821:2007
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5), consumable electrode remelted, solution treated and precipitation treated - Forgings a or D 200 mm, R<(Index)m> 1070 MPa (FOREIGN STANDARD)
DIN EN 2818:2000
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) consumable electrode remelted, solution treated and precipitation treated - Bar for machining a or D 200 mm, R<(Index)m> 1070 MPa (FOREIGN STANDARD)
DIN EN 2817:2000
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5), consumable electrode remelted, solution treated and precipitation treated - Forgings a or D 200 mm, R<(Index)m> 965 MPa (FOREIGN STANDARD)
DIN EN 2816:2000
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) consumable electrode remelted, solution treated and precipitation treated - Bar for machining, a or D 200 mm, R<(Index)m> 965 MPa (FOREIGN STANDARD)
DIN EN 2815:2000
Aerospace series - Aluminium alloy AL-P6061-T6 - Drawn tube for pressure applications 0,6 mm a 12,5 mm (FOREIGN STANDARD)
DIN EN 2813:2000
Aerospace series - Stripping of electric cables (FOREIGN STANDARD)
DIN EN 2812:1997
Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2810:2001
Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification: 900 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 2809:2001
Aerospace series - Anodizing of titanium and titanium alloys (FOREIGN STANDARD)
DIN EN 2808:1997
Aerospace series - Aluminium alloy AL-P7475-T7651 - Plate, 6 mm a 40 mm (FOREIGN STANDARD)
DIN EN 2805:2000
Aerospace series - Aluminium alloy AL-P7075-T7651 - Plate, 6 mm a 25 mm (FOREIGN STANDARD)
DIN EN 2804:2000
Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm a 6 mm; German and English version EN 2803:2005 (FOREIGN STANDARD)
DIN EN 2803:2005
DIN EN 2802: 2005 (FOREIGN STANDARD)
DIN EN 2802:2005
Aerospace series - Fluorocarbon rubber (FPM) - Low compression set, hardness 90 IRHD (FOREIGN STANDARD)
DIN EN 2799:1995
Aerospace series - Fluorocarbon rubber (FPM) - Low compression set, hardness 80 IRHD (FOREIGN STANDARD)
DIN EN 2798:1995
Aerospace series - Fluorocarbon rubber (FPM) - Low compression set, hardness 70 IRHD (FOREIGN STANDARD)
DIN EN 2797:1995
Aerospace series - Fluorocarbon rubber (FPM) - Low compression set, hardness 60 IRHD (FOREIGN STANDARD)
DIN EN 2796:1995
Aerospace series - Fluorocarbon rubber (FPM) - Low compression set, hardness 50 IRHD (FOREIGN STANDARD)
DIN EN 2795:1995
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals; product standard (FOREIGN STANDARD)
DIN EN 2794-004:1999
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 003: Metric thread terminals; product standard (FOREIGN STANDARD)
DIN EN 2794-003:1999
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification (FOREIGN STANDARD)
DIN EN 2794-001:1999
DIN EN 3626:2007
Aerospace series - Nuts, hexagon, self-locking in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 ?C; German and English version EN 3626:2006 (FOREIGN STANDARD)
DIN EN 3624:1996
Aerospace series - Polysulphide sealants, two component - Technical specification (FOREIGN STANDARD)
DIN EN 3618:1995
Aerospace series - Rivets, solid, 100? countersunk normal head, in titanium Ti 44,5 Cb; inch based series (FOREIGN STANDARD)
DIN EN 3615:1999
Aerospace series - Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption (FOREIGN STANDARD)
DIN EN 3612:1996
Aerospace series - Undercuts for splines - Design standard (FOREIGN STANDARD)
DIN EN 3611:1995
Aerospace series - Spigots - Dimensions and fit selection; design standard (FOREIGN STANDARD)
DIN EN 3567-004:2003
Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 004: Double in-line couplers; Product standard; German and English version EN 3567-004:2001 (FOREIGN STANDARD)
DIN EN 3567-003:2003
Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003: Single in-line couplers; Product standard; German and English version EN 3567-003:2001 (FOREIGN STANDARD)
DIN EN 3567-001:2003
Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 001: Technical specification; German and English version EN 3567-001:2001 (FOREIGN STANDARD)
DIN EN 3557:1998
Aerospace series - Aluminium alloy AL-P6061-T4 - Drawn tube for pressure applications, 0,6 mm a 3 mm (FOREIGN STANDARD)
DIN EN 3553:2006
Aerospace series - Aluminium alloy AL-P2618A-T6511 - Extruded bar and section - a or D 160 mm; German and English version EN 3553:2004 (FOREIGN STANDARD)
DIN EN 3552:2006
Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm; German and English version EN 3552:2005 (FOREIGN STANDARD)
DIN EN 3545-009:2009
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 009: Protective cover for plug and receptacle - Product standard; German and English v
DIN EN 3545-008:2008
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 008: Tools for assembly/removal of coding and att (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3545-007:2006
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 007: Cable clamp - Product standard; German and E (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3545-006:2007
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 006: Male coding and attachment System for mounti (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3545-005:2007
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 005: Female coding and attachment System for moun (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3545-004:2006
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 004: Connectors with male contacts - Product stan (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3545-003:2006
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 003: Connectors with female contacts - Product st (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3545-002:2009
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 002: Specification of performance and contact arrangements; German and English version
DIN EN 3545-001:2009
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 ?C to 175 ?C - Part 001: Technical specification; German and English version EN 3545-001:2008 (Foreign Sta
DIN EN 3543:1997
Aerospace series - Screws, 100? countersunk normal head, offset cruciform recess, close tolerance shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3542:1998
Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750) (FOREIGN STANDARD)
DIN EN 3539:1993
Aerospace series; nuts, anchor, self-locking, one lug, fixed, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3538:1993
Aerospace series; nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3537:1993
Aerospace series; nuts, anchor, self-locking, fixed, two lug, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3536:2007
Aerospace series - Nuts, hexagon, self-locking, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C; German and English version EN 3536:2006 (FOREIGN STANDARD)
DIN EN 3532:2007
Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm a 40 mm - 1 750 MPa R< (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3531:2007
Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a 6 mm - 1 750 MPa R<(Index (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3529:1999
Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5), vacuum induction melted and vacuum arc remelted, solution treated and precipitation treated - Forgings a or D 150 mm, 1750 MPa R<(Index)m> 2000 MPa (FOREIGN STANDARD)
DIN EN 3527:2007
Aerospace series - Steel FE-PL1504 (33CrMoV12) - Air melted - Softened - Forging stock - a or D 300 mm; German and English version EN 3527:2007 (FOREIGN STANDARD)
DIN EN 3526:2007
Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm a 6 mm - 980 MPa R<(Index)m> 1180 MPa; German and English version EN 3526:2007 (FOREIGN STANDARD)
DIN EN 3525:2007
Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm a 20 mm - 1080 MPa R<(Index)m> 1280 MPa; German and English version EN 3525:2007 (FOREIGN STANDARD)
DIN EN 3524:2007
Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm a 6 mm - 1080 MPa R<(Index)m> 1280 MPa; German and English version EN 3524:2007 (FOREIGN STANDARD)
DIN EN 3523:2007
Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De 100 mm - 1080 MPa R<(Index)m> 1280 MPa; German and English version EN 3523:2007 (FOREIGN STANDARD)
DIN EN 3521:1999
Aerospace series - Steel FE-PL2106 (30CrNiMo8) air melted, hardened and tempered - Bar for machining D<(Index)e> 150 mm, 900 MPa R<(Index)m> 1100 MPa (FOREIGN STANDARD)
DIN EN 3520:1995
Aerospace series - Steel FE-PL2105 - Air melted; softened; forging stock a or D 300 mm (FOREIGN STANDARD)
DIN EN 3519:1995
Aerospace series - Steel FE-PL2105 - Air melted; hardened and tempered; bar for machining D<(Index)e> 150 mm, 880 MPa R<(Index)m> 1080 MPa (FOREIGN STANDARD)
DIN EN 3518:1995
Aerospace series - Steel FE-PL2105 - Air melted; hardened and tempered; forgings D<(Index)e> 150 mm, 1080 MPa R<(Index)m> 1280 MPa (FOREIGN STANDARD)
DIN EN 3517:1995
Aerospace series - Steel FE-PL2105 - Air melted; hardened and tempered; bar for machining D<(Index)e> 150 mm, 1080 MPa R<(Index)m> 1280 MPa (FOREIGN STANDARD)
DIN EN 3516:1999
Aerospace series - Steel FE-PL8201 (41NiCrMo2), air melted, softened - Forging stock a or D 300 mm (FOREIGN STANDARD)
DIN EN 3515:1999
Aerospace series - Steel FE-PL8201 (41NiCrMo2), air melted, hardened and tempered - Hand and die forgings D<(Index)e> 25 mm, 1100 MPa R<(Index)m> 1300 MPa (FOREIGN STANDARD)
DIN EN 3512:1999
Aerospace series - Steel FE-PL1801 (100Cr6), vacuum induction melted and consumable electrode remelted, hardened and tempered - Hollow bars for the manufacturer of bearings 3,5 mm a 55 mm (FOREIGN STANDARD)
DIN EN 3511:1999
Aerospace series - Steel FE-PL1801 (100Cr6), vacuum induction melted and consumable electrode remelted, softened - Bar for the manufacture of machined bearings a or D 130 mm (FOREIGN STANDARD)
DIN EN 3510:1998
Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) solution treated and precipitation treated - Bar and section D<(Index)e> 100 mm (FOREIGN STANDARD)
DIN EN 3509:1999
Aerospace series - Steel FE-PL1501 (30CrMo12), air melted, hardened and tempered - Bar D<(Index)e> 40 mm, 1050 MPa R<(Index)m> 1250 MPa (FOREIGN STANDARD)
DIN EN 3508:1999
Aerospace series - Steel FE-PL1501 (30CrMo12), air melted, hardened and tempered - Bar D<(Index)e> 100 mm, 930 MPa R<(Index)m> 1080 MPa (FOREIGN STANDARD)
DIN EN 3507:2007
Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - D<(Index)e> 100 mm - 930 MPa R<(Index)m> 1080 MPa; German and English version EN 3507:2006 (FOREIGN STANDARD)
DIN EN 3506:2003
Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm a 100 mm; Dimensions; German and English version EN 3506:2001 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3504:1994
Aerospace series; titanium and titanium alloys; circular tubes for fluids; close tolerances; diameter 3,2 mm D 50 mm, thickness 0,25 mm a 2 mm; dimensions (FOREIGN STANDARD)
DIN EN 3499:1992
Aerospace series; titanium TI-P99003; annealed, sheet and strip, cold rolled, a 3 mm, 570 MPa R<(Index)m> 730 MPa (FOREIGN STANDARD)
DIN EN 3498:1992
Aerospace series; titanium TI-P99002; annealed, sheet and strip, cold rolled, a 3 mm, 390 MPa R<(Index)m> 540 MPa (FOREIGN STANDARD)
DIN EN 3497:1992
Aerospace series; titanium TI-P99001; annealed, sheet and strip, cold rolled, a 3 mm, 290 MPa R<(Index)m> 420 MPa (FOREIGN STANDARD)
DIN EN 3496:1996
Aerospace series - Titanium TI-P99003 - Grade 2, annealed, forgings D<(Index)e> 150 mm (FOREIGN STANDARD)
DIN EN 3495:1996
Aerospace series - Titanium alloy TI-P19001 - Grade 2, annealed, forgings D<(Index)e> 150 mm (FOREIGN STANDARD)
DIN EN 3494:1996
Aerospace series - Titanium alloy TI-P19001 - Grade 2, solution treated and aged, forgings D<(Index)e> 75 mm (FOREIGN STANDARD)
DIN EN 3491:2007
Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - D<(Index)e> 100 mm - 900 MPa R<(Index)m> 1100 MPa; German and English version EN 3491:2006 (FOREIGN STANDARD)
DIN EN 3490:2007
Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Bar for machining - De 200 mm - 900 MPa R<(Index)m> 1100 MPa; German and English version EN 3490:2007 (FOREIGN STANDARD)
DIN EN 3488:2008
Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Sheet and strip - a 6 mm - 500 MPa R<(Index)m> 700 MPa; German and English version EN 3488:2007 (FOREIGN STANDARD)
DIN EN 3487:2008
Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Bar for machining - a or D 250 mm - 500 MPa R<(Index)m> 700 MPa; German and English version EN 3487:2007 (FOREIGN STANDARD)
DIN EN 3480:2008
Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Plate - 6 mm a 50 mm - 500 MPa R<(Index)m> 700 MPa; German and English version EN 3480:2007 (FOREIGN STANDARD)
DIN EN 3479:2007
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Plate - 6 mm a 20 mm - 1070 MPa R<(Index)m> (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3477:1999
Aerospace series - Steel FE-PM3503 (X7CrNiMo15-7-3) - Air melted, solution treated and precipitation treated - Plate 6 mm a 15 mm, 1310 MPa R<(Index)m> 1550 MPa (FOREIGN STANDARD)
DIN EN 3476:2007
Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Softened - Forging stock - a or D 300 mm; German and English version EN 3476:2006 (FOREIGN STANDARD)
DIN EN 3475-811:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 811: Unbalance attenuation; English version prEN 3475-811:2008 (Foreign Standard)
DIN EN 3475-810:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 810: Structural return loss; English version prEN 3475-810:2008 (Foreign Standard)
DIN EN 3475-809:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 809: Resistance unbalance; English version prEN 3475-809:2008 (Foreign Standard)
DIN EN 3475-808:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 808: Cross-talk; German and English version EN 3475-808:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-807:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 807: Transfer impedance; German and English version EN 3475-807:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-806:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 806: Attenuation; German and English version EN 3475-806:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-805:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 805: Characteristic impedance; German and English version EN 3475-805:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-804:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 804: Velocity of propagation; German and English version EN 3475-804:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-803:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 803: Capacitance variation; German and English version EN 3475-803:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-802:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance; English version prEN 3475-802:2008 (Foreign Standard)
DIN EN 3475-802:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 802: Capacitance unbalance; German and English version EN 3475-802:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-801:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 801: Capacitance per unit length; German and English version EN 3475-801:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-706:2006
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability; German and English version EN 3475-706:2005 (FOREIGN STANDARD)
DIN EN 3475-705:2006
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement; German and English version EN 3475-705:2005 (FOREIGN STANDARD)
DIN EN 3475-704:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility; German and English version EN 3475-704:2007 (Foreign Standard)
DIN EN 3475-703:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 703: Permanence of manufacturer's marking (FOREIGN STANDARD)
DIN EN 3475-702:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 702: Screen pushback capability (FOREIGN STANDARD)
DIN EN 3475-701:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 701: Strippabilitiy and adherence of insulation to the conductor (FOREIGN STANDARD)
DIN EN 3475-605:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 605: Wet short circuit test; German and English version EN 3475-605:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-604:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 604: Resistance to dry arc propagation; German and English version EN 3475-604:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-603:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking; German and English version EN 3475-603:2007 (Foreign Standard)
DIN EN 3475-602:2008
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity; German and English version EN 3475-602:2007 (Foreign Standard)
DIN EN 3475-601:2008
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density; German and English version EN 3475-601:2007 (Foreign Standard)
DIN EN 3475-514:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands; German and English version EN 3475-514:2007 (Foreign Standard)
DIN EN 3475-513:2007
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties); German and English version EN 3475-513:2005 (FOREIGN STANDARD)
DIN EN 3475-512:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 512: Flexure endurance; German and English version EN 3475-512:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-511:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion; German and English version EN 3475-511:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-510:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material; German and English version EN 3475-510:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-509:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 509: Solderability; German and English version EN 3475-509:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-508:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness; German and English version EN 3475-508:2007 (Foreign Standard)
DIN EN 3475-507:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507: Adherence of plating; German and English version EN 3475-507:2007 (Foreign Standard)
DIN EN 3475-506:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity; German and English version EN 3475-506:2007 (Foreign Standard)
DIN EN 3475-504:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 504: Torsion (FOREIGN STANDARD)
DIN EN 3475-503:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 503: Scrape abrasion (FOREIGN STANDARD)
DIN EN 3475-502:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 502: Notch propagation (FOREIGN STANDARD)
DIN EN 3475-501:2008
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through; German and English version EN 3475-501:2006 (FOREIGN STANDARD)
DIN EN 3475-418:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermal endurance for conductors; German and English version EN 3475-418:2007 (Foreign Standard)
DIN EN 3475-417:2009
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 417: Fire resistance of cables confined inside a harness; English version prEN 3475-417:2008 (Foreign Standard)
DIN EN 3475-416:2007
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability; German and English version EN 3475-416:2005 (FOREIGN STANDARD)
DIN EN 3475-415:2007
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature; German and English version EN 3475-415:2005 (FOREIGN STANDARD)
DIN EN 3475-414:2007
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test); German and English version EN 3475-414:2005 (FOREIGN STANDARD)
DIN EN 3475-413:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 413: Wrap back test; German and English version EN 3475-413:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-412:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 412: Humidity resistance; German and English version EN 3475-412:2002 (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 3475-411:2007
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids; German and English version EN 3475-411:2005 (FOREIGN STANDARD)
DIN EN 3475-410:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 410: Thermal endurance (FOREIGN STANDARD)
DIN EN 3475-409:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing (FOREIGN STANDARD)
DIN EN 3475-408:2006
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance; German and English version EN 3475-408:2005 (FOREIGN STANDARD)
DIN EN 3475-406:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 406: Cold bend test (FOREIGN STANDARD)
DIN EN 3475-405:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 405: Bending at ambient temperature (FOREIGN STANDARD)
DIN EN 3475-404:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 404: Thermal shock (FOREIGN STANDARD)
DIN EN 3475-403:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 403: Delamination and blocking (FOREIGN STANDARD)
DIN EN 3475-402:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 402: Shrinkage and delamination (FOREIGN STANDARD)
DIN EN 3475-401:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 401: Accelerated ageing (FOREIGN STANDARD)
DIN EN 3475-307:2006
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage; German and English version EN 3475-307:2005 (FOREIGN STANDARD)
DIN EN 3475-306:2007
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors; German and English version EN 3475-306:2005 (FOREIGN STANDARD)
DIN EN 3475-305:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 305: Overload resistance (FOREIGN STANDARD)
DIN EN 3475-304:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 304: Surface resistance (FOREIGN STANDARD)
DIN EN 3475-303:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 303: Insulation resistance (FOREIGN STANDARD)
DIN EN 3475-302:2007
Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test; German and English version EN 3475-302:2006 (FOREIGN STANDARD)
DIN EN 3475-301:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 301: Electrical resistance per unit length (FOREIGN STANDARD)
DIN EN 3475-203:2006
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions; German and English version EN 3475-203:2006 (FOREIGN STANDARD)
DIN EN 3475-202:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 202: Mass (FOREIGN STANDARD)
DIN EN 3475-201:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 201: Visual examination (FOREIGN STANDARD)
DIN EN 3475-100:2002
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 100: General (FOREIGN STANDARD)
DIN EN 3474:2006
Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm a 6 mm; German and English version EN 3474:2005 (FOREIGN STANDARD)
DIN EN 3470:1999
Aerospace series - Steel FE-PM1503 (X3CrNiMoAL 13-8-2), vacuum induction melded and consumable electrode remelded, solution treated and precipitation treated - Hand and die forgings, a oder D 150 mm, 1200 M (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3469:2000
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) consumable electrode remelted, solution treated and precipitation treated - Forgings a or D 200 mm, R<(Index)m> 1310 MPa (FOREIGN STANDARD)
DIN EN 3467:1997
Aerospace series - Titanium alloy TI-C64001, not heat treated - Remelting stock, D <(Index)e> 300 mm (FOREIGN STANDARD)
DIN EN 3466:1994
Aerospace series - Titanium alloy TI-P63001, solution treated and aged; bar for machining D 150 mm (FOREIGN STANDARD)
DIN EN 3465:1996
Aerospace series - Titanium alloy TI-P63001 - Not heat treated, grade 2 forging stock for solution treated and aged forgings a or D 360 mm (FOREIGN STANDARD)
DIN EN 3464:1996
Aerospace series - Titanium alloy TI-P64001, annealed - Plates 6 mma 100 mm (FOREIGN STANDARD)
DIN EN 3463:1994
Aerospace series - Titanium alloy TI-P19001, solution treated and aged; bar for machining D 75 mm (FOREIGN STANDARD)
DIN EN 3462:1994
Aerospace series - Titanium alloy TI-P19001, annealed - Bar for machining D 150 mm (FOREIGN STANDARD)
DIN EN 3461:1994
Aerospace series - Titanium alloy TI-P99003, annealed - Bar for machining D 150 mm, 540 MPa R<(Index)m> 740 MPa (FOREIGN STANDARD)
DIN EN 3460:1997
Aerospace series - Titanium TI-P99002, annealed - Bar for machining a or D 150 mm, R<(Index)m> 390 MPa (FOREIGN STANDARD)
DIN EN 3459:1996
Aerospace series - Titanium alloy TI-P63001, solution treated and aged - Plates 6 mma 50 mm (FOREIGN STANDARD)
DIN EN 3456:1992
Aerospace series; titanium alloy TI-P64001; annealed, sheet and strip, hot rolled, a 6 mm (FOREIGN STANDARD)
DIN EN 3455:1996
Aerospace series - Titanium alloy TI-P19001 - Not heat treated, grade 2 forging stock for solution treated and aged forgings a or D 300 mm (FOREIGN STANDARD)
DIN EN 3454:1996
Aerospace series - Titanium alloy TI-P19001 - Not heat treated, grade 2 forging stock for annealed forgings a or D 300 mm (FOREIGN STANDARD)
DIN EN 3453:1996
Aerospace series - Titanium TI-P99003 - Not heat treated, grade 2 forging stock for annealed forgings a or D 300 mm (FOREIGN STANDARD)
DIN EN 3452:1996
Aerospace series - Titanium TI-P99002 - Grade 2, annealed, forgings D<(Index)e> 150 mm (FOREIGN STANDARD)
DIN EN 3451:1996
Aerospace series - Titanium TI-P99002 - Not heat treated, grade 2 forging stock for annealed forgings a or D 300 mm (FOREIGN STANDARD)
DIN EN 3446:1995
Aerospace series - Bearings, precision ball, without flange, in corrosion resisting steel, for instruments and equipment - Dimensions and loads (FOREIGN STANDARD)
DIN EN 3444:2007
Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1250 MPa (at ambient temperature)/650 ?C; German a (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3442:1992
Aerospace series; titanium TI-P99002; annealed, sheet and strip, hot rolled, a 6 mm, 390 MPa R<(Index)m> 540 MPa (FOREIGN STANDARD)
DIN EN 3441:1992
Aerospace series; titanium TI-P99001; annealed, sheet and strip, hot rolled, a 6 mm, 290 MPa R<(Index)m> 420 MPa (FOREIGN STANDARD)
DIN EN 3439:1994
Aerospace series - Lead-acid batteries for aircraft of format D type - Product standard (FOREIGN STANDARD)
DIN EN 3438:1994
Aerospace series - Lead-acid batteries for aircraft of format C type - Product standard (FOREIGN STANDARD)
DIN EN 3437:1994
Aerospace series - Lead-acid batteries for aircraft of format B type - Product standard (FOREIGN STANDARD)
DIN EN 3436:1994
Aerospace series - Lead-acid batteries for aircraft of format A type - Product standard (FOREIGN STANDARD)
DIN EN 3435:1993
Aerospace series; nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, in heat resisting steel, MoS<(Index)2> lubricated; classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3434:1999
Aerospace series - Nuts, hexagon, slotted/castellated, self-locking, in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3427:2007
Aerospace series - Groove dimensions for radial mounting retaining rings; German and English version EN 3427:2006 (FOREIGN STANDARD)
DIN EN 3424:1992
Aerospace series; rivets, solid, universal head, in titanium alloy Ti 45,5 Cb; metric series (FOREIGN STANDARD)
DIN EN 3422:1995
Aerospace series - Rivets, solid, universal head, in titanium TI-PO2, anodized - Metric series (FOREIGN STANDARD)
DIN EN 3421:1995
Aerospace series - Rivets, solid, 100? countersunk normal head, in corrosion resisting steel FE-PA11, passivated - Metric series (FOREIGN STANDARD)
DIN EN 3420:1995
Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA11, passivated - Metric series (FOREIGN STANDARD)
DIN EN 3419:1992
Aerospace series; rivets, solid, 100? normal countersunk head, in nickel base alloy NI-P11; metric series (FOREIGN STANDARD)
DIN EN 3418:1992
Aerospace series; rivets, solid, 100? normal countersunk head, in nickel base alloy NI-P11, cadmium plated; metric series (FOREIGN STANDARD)
DIN EN 3417:1992
Aerospace series; rivets, solid, universal head, in nickel base alloy NI-P11; metric series (FOREIGN STANDARD)
DIN EN 3416:1992
Aerospace series; rivets, solid, universal head, in nickel base alloy NI-P11, cadmium plated; metric series (FOREIGN STANDARD)
DIN EN 3415:1995
Aerospace series - Rivets, solid, 100? countersunk normal head, in corrosion resisting steel FE-PA92HT, passivated - Metric series (FOREIGN STANDARD)
DIN EN 3414:1995
Aerospace series - Rivets, solid, universal head, in corrosion resisting steel FE-PA92HT, passivated - Metric series (FOREIGN STANDARD)
DIN EN 3413:1992
Aerospace series; rivets, solid, 100? normal countersunk head with dome, in aluminium alloy 7050; metric series (FOREIGN STANDARD)
DIN EN 3412:1992
Aerospace series; rivets, solid, 100? normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated; metric series (FOREIGN STANDARD)
DIN EN 3411:1992
Aerospace series; rivets, solid, universal head, in aluminium alloy 2017A; metric series (FOREIGN STANDARD)
DIN EN 3410:1993
Aerospace series; rivets, solid, 100? normal countersunk head, in aluminium 1050A; metric series (FOREIGN STANDARD)
DIN EN 3409:1993
Aerospace series; rivets, solid, universal head, in aluminium 1050A, metric series (FOREIGN STANDARD)
DIN EN 3408:1992
Aerospace series; rivets, solid, 100? normal countersunk head in aluminium alloy 2017A; metric series (FOREIGN STANDARD)
DIN EN 3405:1992
Aerospace series; rivets, solid, 100? normal countersunk head with dome, in aluminium alloy 7050, anodized or chromated; metric series (FOREIGN STANDARD)
DIN EN 3404:1992
Aerospace series; rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated; metric series (FOREIGN STANDARD)
DIN EN 3403:1992
Aerospace series; rivets, solid, universal head, in aluminium alloy 5056A; metric series (FOREIGN STANDARD)
DIN EN 3401:1992
Aerospace series; rivets, solid, 100? normal countersunk head, in aluminium alloy 7050; metric series (FOREIGN STANDARD)
DIN EN 3400:1992
Aerospace series; rivets, solid, 100? normal countersunk head, in aluminium alloy 5056A, anodized or chromated; metric series (FOREIGN STANDARD)
DIN EN 3399:1992
Aerospace series; rivets, solid, 100? normal countersunk head, in aluminium alloy 5056A; metric series (FOREIGN STANDARD)
DIN EN 3398:1992
Aerospace series; rivets, solid, universal head, in aluminium alloy 7050, anodized or chromated, metric series (FOREIGN STANDARD)
DIN EN 3397:1992
Aerospace series; rivets, solid, universal head, in aluminium alloy 7050; metric series (FOREIGN STANDARD)
DIN EN 3396:1992
Aerospace series; rivets, solid, 100? normal countersunk head with dom, in aluminium alloy 5056A; metric series (FOREIGN STANDARD)
DIN EN 3395:1992
Aerospace series; rivets, solid, 100? normal countersunk head with dom, in aluminium alloy 2017A; metric series (FOREIGN STANDARD)
DIN EN 3389:2009
Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy) - Classification: 1 210 MPa/730 ?C - Manufacturing method optional - Technical specification; German and English version EN 3389:2009 (Foreign Stan
DIN EN 3388:2009
Aerospace series - Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa/650 ?C - Manufacturing method optional - Technical specification; German and English version EN 3388:2009 (Foreign S
DIN EN 3386:1992
Aerospace series; rings retaining, radial mounting, steel, phosphated (FOREIGN STANDARD)
DIN EN 3385:1992
Aerospace series; rings retaining, external, axial mounting, steel, vacuum cadmium plated (FOREIGN STANDARD)
DIN EN 3384:1992
Aerospace series; rings retaining, external, axial mounting, steel, phosphated (FOREIGN STANDARD)
DIN EN 3383:1992
Aerospace series; rings retaining, internal, axial mounting, steel, vacuum cadmium plated (FOREIGN STANDARD)
DIN EN 3382:1992
Aerospace series; rings retaining, internal, axial mounting, steel, phosphated (FOREIGN STANDARD)
DIN EN 3381:1996
Aerospace series - Screws, 100? countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3380:1996
Aerospace series - Rings, retaining - Technical specification (FOREIGN STANDARD)
DIN EN 3379:1996
Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730 ?C (FOREIGN STANDARD)
DIN EN 3378:1997
Aerospace series - Titanium TI-P99002, annealed - Wire for rivet 1,6 mm D 10 mm (FOREIGN STANDARD)
DIN EN 3377:1996
Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425 ?C (FOREIGN STANDARD)
DIN EN 3375-009:2009
Aerospace series - Cable, electrical, for digital data transmission - Part 009: Single braid - CAN Bus - 120 Ohms - Type WX - Product standard; English version prEN 3375-009:2008 (Foreign Standard)
DIN EN 3375-008:2009
Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 ohms - Type KD - Product standard; German and English version prEN 3375-008:2008 (Foreign Standard)
DIN EN 3375-007:2008
Aerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard; German and English version EN 3375-007:2006 (FOREIGN STANDARD)
DIN EN 3375-006:2008
Aerospace series - Cable, electrical, for digital data transmission - Part 006: Single braid - 78 Ohms - Type XM - Product standard; German and English version EN 3375-006:2006 (FOREIGN STANDARD)
DIN EN 3375-005:2009
Aerospace series - Cable, electrical, for digital data transmission - Part 005: Double braid + metallic layer - 77 Ohms - Type WV - Product standard; German and English version EN 3375-005:2007 (Foreign Standard)
DIN EN 3375-004:2009
Aerospace series - Cable, electrical, for digital data transmission - Part 004: Double braid - 77 Ohms - Type WJ - Product standard; German and English version EN 3375-004:2007 (Foreign Standard)
DIN EN 3375-001:2008
Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification; German and English version EN 3375-001:2007 (FOREIGN STANDARD)
DIN EN 3373-014:2009
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 014: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 ?C - Product standard; English version prEN 3373-014:2008
DIN EN 3373-013:2007
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 013: In-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260YC - Produ (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3373-012:2007
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 012: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150 YC - Product standard (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3373-011:2009
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 ?C for metric and inch stud series - Product standard;
DIN EN 3373-010:2009
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 ?C for metric and inch stud series - Product standard; En
DIN EN 3373-002:2009
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 002: General and list of product standard; German and English version prEN 3373-002:2008 (Foreign Standard)
DIN EN 3373-001:2008
Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 001: Technical specification; German and English version EN 3373-001:2007 (FOREIGN STANDARD)
DIN EN 3372-011:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 011: Dummy receptacle - Product standard; German and English versi
DIN EN 3372-009:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 009: Receptacle, jam nut mounting - Product standard; German and E
DIN EN 3372-008:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 008: Free plug with grounding spring - Product standard; German an
DIN EN 3372-007:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 007: Protective cover for plug - Product standard; German and Engl
DIN EN 3372-006:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 006: Protective cover for receptacle - Product standard; German an
DIN EN 3372-005:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 005: Receptacle, hermetic, round flange, solder mounting - Product
DIN EN 3372-003:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 003: Square flange receptacle - Product standard; German and Engli
DIN EN 3372-002:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 002: Specification of performance and contact arrangements; German
DIN EN 3372-001:2008
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 ?C to 175 ?C or 200 ?C continuous - Part 001: Technical specification; German and English version EN 3372-0
DIN EN 3370:1992
Aerospace series; rivets, solid, 100? normal countersunk head with dome, in aluminium alloy 7050, anodized or chromated; inch based series (FOREIGN STANDARD)
DIN EN 3369:1992
Aerospace series; rivets, solid, universal head, in aluminium alloy 7050, anodized or chromated, inch based series (FOREIGN STANDARD)
DIN EN 3368:2008
Aerospace series - Aerospace design standard - Holes for locating pins; German and English version EN 3368:2008 (FOREIGN STANDARD)
DIN EN 3365:2007
Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted, softened, forging stock a or D 300 mm; German and English version EN 3365:2007 (FOREIGN STANDARD)
DIN EN 3364:2007
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, softened, forging stock a or D 300 mm; German and English version EN 3364:2007 (FOREIGN STANDARD)
DIN EN 3361:2007
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a 6 mm, 1070 MPa R<(Index)m> 1220 MPa; (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3359:2007
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D 300 mm; German and English version EN 3359:2007 (FOREIGN STANDARD)
DIN EN 3358:1999
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2), vacuum induction melted and consumable electrode remelted, solution treated and precipitation treated - Bar for machining a or D 150 mm, R<(Index)m> < (TITLE TRUNCATED) (FOREIGN STANDARD)
DIN EN 3357:1999
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2), vacuum induction melted and consumable electrode remelted, solution treated and precipitation treated - Bar for machining a or D 150 mm, 1200 MPa
DIN EN 3356:1996
Aerospace series - Titanium alloy TI-P46001 - Grade 2, solution treated and aged, forgings D<(Index)e> 100 mm (FOREIGN STANDARD)
DIN EN 3355:1997
Aerospace series - Titanium alloy TI-P64001, annealed - Extruded section, D<(Index)e> 150 mm, 900 MPa R<(Index)m> 1160 MPa (FOREIGN STANDARD)
DIN EN 3354:1999
Aerospace series - Titanium alloy TI-P64001, annealed - Sheet for superplastic forming a 6 mm (FOREIGN STANDARD)
DIN EN 3352:1997
Aerospace series - Titanium alloy TI-C64001 - Investment casting, hot isostatic pressed, a 50 mm, R<(Index)m> 880 MPa (FOREIGN STANDARD)
DIN EN 3351:1996
Aerospace series - Titanium alloy TI-P63001 - Grade 2, solution treated and aged, forgings D<(Index)e> 150 mm (FOREIGN STANDARD)
DIN EN 3346:1998
Aerospace series - Aluminium alloy AL-P2014A-T3 - Drawn tube for structural applications; 0,6 mm a 12,5 mm (FOREIGN STANDARD)
DIN EN 3341:2006
Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 3341:2005 (FOREIGN STANDARD)
DIN EN 3339:2007
Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a 200 mm; German and English version EN 3339:2006 (FOREIGN STANDARD)
DIN EN 3338:2006
Aerospace series - Aluminium alloy AL-P7050-T74511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control; German and English version EN 3338:2005 (FOREIGN STANDARD)
DIN EN 3336:2000
Aerospace series - Aluminium alloy AL-P7150-T651 - Plate, 6 mm a 40 mm (FOREIGN STANDARD)
DIN EN 3335:2006
Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0,8 mm a 6 mm; German and English version EN 3335:2005 (FOREIGN STANDARD)
DIN EN 3333:2006
Aerospace series - Aluminium alloy AL-P7475-T762 - Sheet and strip - 0,6 mm a 6 mm; German and English version EN 3333:2005 (FOREIGN STANDARD)
DIN EN 3332:2006
Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm a 6 mm; German and English version EN 3332:2005 (FOREIGN STANDARD)
DIN EN 3330:2009
Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealed - Bar and wire - D (Index)e 40 mm - For prevailing torque nuts; German and English version EN 3330:2009 (Foreign Standard)
DIN EN 3329:2009
Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealed - Sheet and strip - 0,3 mm a 2 mm - For prevailing torque nuts; German and English version EN 3329:2009 (Foreign Standard)
DIN EN 3328:2008
Aerospace series - Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting steel FE-PM38 (FV535), uncoated - Classification: 1 000 MPa/550 ?C; German and English version EN 3328:2008 (Foreign Standard)
DIN EN 3327:2008
Aerospace series - Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated - Classification: 1275 MPa/650 ?C; German and English version EN 3327:2008 (Foreign Standard)
DIN EN 3323:2009
Aerospace series - Bolts with double hexagon head, relieved shank long thread - In heat resisting steel FE-PM38 (FV 535) Classification: 1000 MPa/550 ?C; German and English version EN 3323:2009 (Foreign Standard)
DIN EN 3322:1996
Aerospace series - Titanium alloy TI-P65001, solution treated and aged - Grade 1-forgings D<(Index)e> 75 mm (FOREIGN STANDARD)
DIN EN 3321:1996
Aerospace series - Titanium alloy TI-P65001, as forged - Grade 1 forging stock, for solution treated and aged forgings a or D 360 mm (FOREIGN STANDARD)
DIN EN 3320:1996
Aerospace series - Titanium alloy TI-P64002 - Grade 2, annealed, forgings D<(Index)e> 150 mm (FOREIGN STANDARD)
DIN EN 3319:1994
Aerospace series - Titanium alloy TI-P64002, annealed; bar for machining D 80 mm (FOREIGN STANDARD)
DIN EN 3318:1996
Aerospace series - Titanium alloy TI-P64002 - Not heat treated, grade 2 forging stock for annealed forgings a or D 360 mm (FOREIGN STANDARD)
DIN EN 3315:1996
Aerospace series - Titanium alloy TI-P64001, solution treated and aged - Forgings D<(Index)e> 75 mm (FOREIGN STANDARD)
DIN EN 3314:1994
Aerospace series - Titanium alloy TI-P64001, solution treated and aged; bar for machining D 75 mm (FOREIGN STANDARD)
DIN EN 3313:1996
Aerospace series - Titanium alloy TI-P64001 - Not heat treated, grade 2 forging stock for solution treated and aged forgings a or D 360 mm (FOREIGN STANDARD)
DIN EN 3312:1996
Aerospace series - Titanium alloy TI-P64001 - Grade 2, annealed, forgings D <(Index)e> 150 mm (FOREIGN STANDARD)
DIN EN 3311:1994
Aerospace series - Titanium alloy TI-P64001, annealed - Bar for machining D 150 mm (FOREIGN STANDARD)
DIN EN 3310:1996
Aerospace series - Titanium alloy TI-P64001 - Not heat treated, grade 2 forging stock for annealed forgings a or D 360 mm (FOREIGN STANDARD)
DIN EN 3308:1996
Aerospace series - Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3307:1996
Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3306:1996
Aerospace series - Screws, 100? countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3305:1996
Aerospace series - Screws, 100? countersunk head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3304:1996
Aerospace series - Screws, 100? countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 ?C (FOREIGN STANDARD)
DIN EN 3303:1997
Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3301:2008
Aerospace series - Bolts, T-head, close tolerance, medium thread length, in heat resisting steel FE-PM1708 (FV535), uncoated - Classification: 1000 MPa/550 ?C; German and English version EN 3301:2007 (FOREIGN STANDARD)
DIN EN 3299:2008
Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification; German and English version EN 3299:2007 (FOREIGN STANDARD)
DIN EN 3298:2009
Aerospace series - Inserts, thin wall, self-locking - Installation and removal procedure; German and English version EN 3298:2008 (Foreign Standard)
DIN EN 3297:1998
Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification (FOREIGN STANDARD)
DIN EN 3295:1992
Aerospace series; shaft-nuts, self-locking, in FE-PA92HT (A286), silver plated (FOREIGN STANDARD)
DIN EN 3295/A1:1999
Aerospace series - Shaft-nuts, self-locking, in FE-PA92HT (A286), silver plated; Amendment A1 (FOREIGN STANDARD)
DIN EN 3294:2008
Aerospace series - Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts - Classification: 1210 MPa/730 ?C; German and English version EN 3294:2008 (Foreign Standard)
DIN EN 3293:2008
Aerospace series - Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated - Classification: 1275 MPa/650 ?C; German and English version EN 3293:2008 (Foreign Standard)
DIN EN 3292:1994
Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4; dimensions and loads (FOREIGN STANDARD)
DIN EN 3291:1994
Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4; dimensions and loads (FOREIGN STANDARD)
DIN EN 3290:1994
Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4; dimensions and loads (FOREIGN STANDARD)
DIN EN 3289:1994
Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2; dimensions and loads (FOREIGN STANDARD)
DIN EN 3288:1994
Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2; dimensions and loads (FOREIGN STANDARD)
DIN EN 3287:1994
Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2; dimensions and load (FOREIGN STANDARD)
DIN EN 3286:1994
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2; normal clearance category; dimensions and loads (FOREIGN STANDARD)
DIN EN 3285:1994
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2; normal clearance category; dimensions and loads (FOREIGN STANDARD)
DIN EN 3284:1994
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2; normal clearance category; dimensions and loads (FOREIGN STANDARD)
DIN EN 3283:1994
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9; dimensions and loads (FOREIGN STANDARD)
DIN EN 3282:1994
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9; dimensions and loads (FOREIGN STANDARD)
DIN EN 3281:1994
Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9; dimensions and loads (FOREIGN STANDARD)
DIN EN 3280:1994
Aerospace series; bearings, airframe rolling, rigid or self-aligning; technical specification (FOREIGN STANDARD)
DIN EN 3280/A1:2002
Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification; Amendment A1 (FOREIGN STANDARD)
DIN EN 3275:2002
Aerospace series - Pipe coupling 8?30 up to 28000 kPa - Dynamic beam seal; Metric series; Technical specification; German and English version EN 3275:2002 (FOREIGN STANDARD)
DIN EN 3274:2002
Aerospace series - Pipe coupling 8?30 - Threaded; Geometric configuration (FOREIGN STANDARD)
DIN EN 3273:2006
Aerospace series - Pipe coupling 8?30 - Dynamic beam seal end for elbows, tees and crosses - Geometric configuration; German and English version EN 3273:2001 (FOREIGN STANDARD)
DIN EN 3272:2006
Aerospace series - Pipe coupling 8o30' - Dynamic beam seal end for ferrule, welded - Geometric configuration; German and English version EN 3272:2001 (FOREIGN STANDARD)
DIN EN 3269:2006
Aerospace series - Pipe coupling 8o30' in titanium alloy - Ferrules, blind, with dynamic beam seal end; German and English version EN 3269:2001 (FOREIGN STANDARD)
DIN EN 3268:2002
Aerospace series - Pipe coupling 8?30 in titanium alloy - Pressure plug (FOREIGN STANDARD)
DIN EN 3267:2002
Aerospace series - Washers, bulkhead, in titanium alloy (FOREIGN STANDARD)
DIN EN 3266:2002
Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut (FOREIGN STANDARD)
DIN EN 3264:2002
Aerospace series - Pipe coupling 8?30 in titanium alloy - Thrust wire nuts (FOREIGN STANDARD)
DIN EN 3247:2002
Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, bulkhead, welded end (FOREIGN STANDARD)
DIN EN 3246:2002
Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, bulkhead (FOREIGN STANDARD)
DIN EN 3245:2002
Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, reducer (FOREIGN STANDARD)
DIN EN 3244:2002
Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, double ended (FOREIGN STANDARD)
DIN EN 3243:2002
Aerospace series - Pipe coupling 8?30 in titanium alloy - Ferrule welded, with dynamic beam seal end (FOREIGN STANDARD)
DIN EN 3241:2009
Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA92HT (A286), silver coated - Classification: 1100 MPa (at ambient temperature)/425 ?C; German and English version EN 3241:2008 (Foreign Standard)
DIN EN 3240:2008
Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated - Classification: 1 100 MPa (at ambient temperature)/425 ?C; German and English version EN 3240:2007 (FOREIGN STANDARD)
DIN EN 3239:1995
Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/650 ?C (FOREIGN STANDARD)
DIN EN 3237:1998
Aerospace series - Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100 HT (Inconel 718) - Silver plated internal thread (FOREIGN STANDARD)
DIN EN 3236:1998
Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Silver plated internal thread (FOREIGN STANDARD)
DIN EN 3230:2001
Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN EN 3229:1993
Aerospace series; nuts, hexagon, plain, reduced height, normal across flats, in steel, cadmium plated, left hand thread; classification: 900 MPa (at ambient temperature)/235 ?C (FOREIGN STANDARD)
DIN Standards : DIN ICS 49 Aircraft and Space Vehicle Engineering (Page 3)
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
