DIN Standards Catalogue
Specification for representation of process control engineering requests in P&I Diagrams and for data exchange between P&ID tools and PCE-CAE tools (Text in English) (FOREIGN STANDARD)
DIN V 44366:2004
Non-destructive examination of fusion welds - Visual examination (FOREIGN STANDARD)
DIN EN 970:1997
DIN EN 910:1996
Bend testing of welds in metallic materials (FOREIGN STANDARD)
DIN EN 895:1999
Destructive testing of welds in metallic materials - Transverse tensile test (FOREIGN STANDARD)
Longitudinal tensile test on weld metal in fusion welded joints (FOREIGN STANDARD)
DIN EN 876:1995
Welds in metallic materials Impact tests (FOREIGN STANDARD)
DIN EN 875:1995
Safety of machinery - Safety requirements for pressure metal diecasting units; German version EN 869:2006 (FOREIGN STANDARD)
DIN EN 869:2007
Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders; English version of DIN EN 792-9 (FOREIGN STANDARD)
DIN EN 792-9:2001
Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers; English version of DIN EN 792-8 (FOREIGN STANDARD)
DIN EN 792-8:2001
Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (FOREIGN STANDARD)
DIN EN 792-7:2002
Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners; English version of DIN EN 792-6 (FOREIGN STANDARD)
DIN EN 792-6:2001
Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills; English version of DIN EN 792-5 (FOREIGN STANDARD)
DIN EN 792-5:2001
Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools; English version of DIN EN 792-4 (FOREIGN STANDARD)
DIN EN 792-4:2001
Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers; English version of DIN EN 792-3 (FOREIGN STANDARD)
DIN EN 792-3:2001
Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools; English version of DIN EN 792-2 (FOREIGN STANDARD)
DIN EN 792-2:2001
Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools; German version EN 792-13:2000+A1:2008 (Foreign Standard)
DIN EN 792-13:2009
Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws; English version of DIN EN 792-12 (FOREIGN STANDARD)
DIN EN 792-12:2001
Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws; English version EN 792-12:2000/prA1:2008 (FOREIGN STANDARD)
DIN EN 792-12/A1:2008
Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears; English version of DIN EN 792-11 (FOREIGN STANDARD)
DIN EN 792-11:2001
Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools; English version of DIN EN 792-10 (FOREIGN STANDARD)
DIN EN 792-10:2001
Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners; English version of DIN EN 792-1 (FOREIGN STANDARD)
DIN EN 792-1:2001
Fluxes for submerged arc welding - Classification (FOREIGN STANDARD)
DIN EN 760:1996
DIN EN 757:1997
Covered electrodes for manual metal arc welding of high strength steels - Classification (FOREIGN STANDARD)
Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment; English version of DIN EN 746-8 (FOREIGN STANDARD)
DIN EN 746-8:2001
Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment; English version of DIN EN 746-5 (FOREIGN STANDARD)
DIN EN 746-5:2001
Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment; English version of DIN EN 746-4 (FOREIGN STANDARD)
DIN EN 746-4:2000
Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases (FOREIGN STANDARD)
DIN EN 746-3:1997
Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems (FOREIGN STANDARD)
DIN EN 746-2:1997
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment (FOREIGN STANDARD)
DIN EN 746-1:1997
Gas welding equipment - Air-aspirated hand blowpipes - Specifications and methods of test (FOREIGN STANDARD)
DIN EN 731:1995
Gas welding equipment - Safety devices - Part 2: Devices not incorporating a flame (flashback) arrestor (FOREIGN STANDARD)
DIN EN 730-2:2003
Gas welding equipment - Safety devices - Part 1: Devices incorporating a flame (flashback) arrestor (FOREIGN STANDARD)
DIN EN 730-1:2003
Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment (FOREIGN STANDARD)
DIN EN 710:1998
Machine tools - Safety - Hydraulic presses; English version of DIN EN 693 (FOREIGN STANDARD)
DIN EN 693:2001
Machine tools - Safety - Hydraulic presses; English version EN 693:2001/prA1:2008 (Foreign Standard)
DIN EN 693/A1:2008
Machine tools - Mechanical presses - Safety (FOREIGN STANDARD)
DIN EN 692:2006
Machine tools - Mechanical presses - Safety; English version EN 692:2005/prA1:2008 (Foreign Standard)
DIN EN 692/A1:2008
DIN EN 60546-2:2008
Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing (IEC 65B/660/CDV:2008); German version FprEN 60546-2:2008 (FOREIGN STANDARD)
DIN EN 60546-1:2008
Controllers with analogue signals for use in industrial-process control systems - Part 1: Methods of evaluating the performance (IEC 65B/659A/CDV:2008); German version FprEN 60546-1:2008 (FOREIGN STANDARD)
Thermal spraying; determination of the tensile adhesive strength of thermally sprayed coatings (FOREIGN STANDARD)
DIN EN 582:1994
Guide for procurement of power station equipment - Part 8-1: Control and instrumentation (FOREIGN STANDARD)
DIN EN 45510-8-1:1998
DIN EN 4500-6:1996
Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 6: Specific rules for filler metals for brazing (FOREIGN STANDARD)
DIN EN 3879:1996
Aerospace series - Metallic materials - Filler metal for welding; technical specification (FOREIGN STANDARD)
DIN EN 3878:1998
Aerospace series - Test method for metallic materials, braze alloys - Flexibility test (FOREIGN STANDARD)
DIN EN 3877:1998
Aerospace series - Metallic materials - Test method; determination of solidus and liquidus temperatures by differential thermal analysis of braze alloys (FOREIGN STANDARD)
DIN EN 3876:1998
Aerospace series - Test method for metallic materials, braze alloys - Fusion test (FOREIGN STANDARD)
DIN EN 3875:1996
Aerospace series - Metallic materials - Filler metal for brazing; technical specification (FOREIGN STANDARD)
Soft soldering fluxes; test methods; determination of zinc content (ISO 9455-8:1991) (FOREIGN STANDARD)
DIN EN 29455-8:1994
Soft soldering fluxes; test methods; copper mirror test (ISO 9455-5:1992) (FOREIGN STANDARD)
DIN EN 29455-5:1994
Soft soldering fluxes; test methods; assessment of tackniness of flux residues (ISO 9455-14:1991) (FOREIGN STANDARD)
DIN EN 29455-14:1994
Soft soldering fluxes; test methods; solubility of flux residues (ISO 9455-11:1991) (FOREIGN STANDARD)
DIN EN 29455-11:1994
Soft soldering fluxes; test methods; determination of non-volatile matter by the gravimetric method (ISO 9455-1:1990) (FOREIGN STANDARD)
DIN EN 29455-1:1994
Soft soldering fluxes; classification and requirements; classification, labelling and packaging (ISO 9454-1:1990) (FOREIGN STANDARD)
DIN EN 29454-1:1994
Resistance spot welding equipment; cooling tubes (ISO 9313:1989) (FOREIGN STANDARD)
DIN EN 29313:1992
Qualification test of welders - Fusion welding - Part 1: Steels; German version EN 287-1:2004 + A2:2006 (FOREIGN STANDARD)
DIN EN 287-1:2006
Resistance spot welding; electrode holders; part 3: parallel shank fixing for end thrust (ISO 8430-3:1988) (FOREIGN STANDARD)
DIN EN 28430-3:1992
Resistance spot welding; electrode holders; part 2: Morse taper fixing (ISO 8430-2:1988) (FOREIGN STANDARD)
DIN EN 28430-2:1992
Resistance spot welding; electrode holders; part 1: taper fixing 1:10 (ISO 8430-1:1988) (FOREIGN STANDARD)
DIN EN 28430-1:1992
DIN EN 28206:1992
Acceptance testing for oxygen cutting machines; testing the accuracy and operational characteristics (ISO 8206:1991) (FOREIGN STANDARD)
Projections for resistance welding (ISO 8167:1989) (FOREIGN STANDARD)
DIN EN 28167:1992
Welds in steel; calibration block No. 2 for ultrasonic examination of welds (ISO 7963:1985) (FOREIGN STANDARD)
DIN EN 27963:1992
Spot welding equipment; taper plug gauges and taper ring gauges (ISO 5822:1988) (FOREIGN STANDARD)
DIN EN 25822:1992
DIN EN 2500-6:1996
Aerospace series - Instructions for the drafting and use of metallic material standards - Part 6: Specific requirements for filler metals for brazing; inactive for new design (FOREIGN STANDARD)
Hand and machine-operated circular screwing dies for parallel pipe threads, G series (ISO 4231:1987) (FOREIGN STANDARD)
DIN EN 24231:1990
Hand and machine-operated circular screwing dies for taper pipe threads, R series (ISO 4230:1987) (FOREIGN STANDARD)
DIN EN 24230:1990
Hand and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988) (FOREIGN STANDARD)
DIN EN 22568:1990
DIN EN 22401:1994
Covered electrodes - Determination of the efficiency, metal recovery and deposition coefficient (ISO 2401:1972) (FOREIGN STANDARD)
Slots in platens for projection welding machines (ISO 865:1981) (FOREIGN STANDARD)
DIN EN 20865:1992
Non-destructive testing of welds - Ultrasonic testing of welded joints (includes Amendment A1) (FOREIGN STANDARD)
DIN EN 1714:2002
Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds (includes Amendment A1) (FOREIGN STANDARD)
DIN EN 1713:2002
Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels (includes Amendment A1:2002) (FOREIGN STANDARD)
DIN EN 1712:2002
Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis; English version of DIN EN 1711 (FOREIGN STANDARD)
DIN EN 1711:2000
Welding - Basic weld joint details in steel - Part 2: Not internally pressurized components; English version of DIN EN 1708-2 (FOREIGN STANDARD)
DIN EN 1708-2:2000
Welding - Basic welded joint details in steel - Part 1: Pressurized components (FOREIGN STANDARD)
DIN EN 1708-1:1999
DIN EN 1600:1997
Covered electrodes for manual metal arc welding of stainless and heat resisting steels - Classification (FOREIGN STANDARD)
Thermal spraying - Component related procedure qualification; German version EN 15648:2009 (Foreign Standard)
DIN EN 15648:2009
Machine-tools safety - Safety requirements for the design and construction of work holding chucks; German version EN 1550:1997+A1:2008 (Foreign Standard)
DIN EN 1550:2008
Dryers and ovens, in which flammable substances are released - Safety requirements; English version of DIN EN 1539:200 (FOREIGN STANDARD)
DIN EN 1539:2000
Thermal spraying - Determination of shear load resistance of thermally sprayed coatings; German version EN 15340:2007 (FOREIGN STANDARD)
DIN EN 15340:2007
Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units; German version EN 15339-2:2007 (FOREIGN STANDARD)
DIN EN 15339-2:2007
Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions; German version EN 15311:2007 (FOREIGN STANDARD)
DIN EN 15311:2007
Vitreous and porcelain enamels - Production of specimens for testing enamel on sheet steel, sheet aluminium and cast iron; German version EN 15206:2007 (FOREIGN STANDARD)
DIN EN 15206:2007
Vitreous and porcelain enamels - Glass lined apparatus for process plants - Part 3: Thermal shock resistance; German version EN 15159-3:2006 (FOREIGN STANDARD)
DIN EN 15159-3:2006
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock; German version EN 15159-2:2006 (FOREIGN STANDARD)
DIN EN 15159-2:2006
Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories; German version EN 15159-1:2006 (FOREIGN STANDARD)
DIN EN 15159-1:2006
Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation; German version EN 15085-5:2007 (FOREIGN STANDARD)
DIN EN 15085-5:2008
Railway applications - Welding of railway vehicles and components - Part 4: Production requirements; German version EN 15085-4:2007 (FOREIGN STANDARD)
DIN EN 15085-4:2008
Railway applications - Welding of railway vehicles and components - Part 3: Design requirements; German version EN 15085-3:2007 (FOREIGN STANDARD)
DIN EN 15085-3:2008
Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer; German version EN 15085-2:2007 (FOREIGN STANDARD)
DIN EN 15085-2:2008
Railway applications - Welding of railway vehicles and components - Part 1: General; German version EN 15085-1:2007 (FOREIGN STANDARD)
DIN EN 15085-1:2008
Transportable wall saw and wire saw equipment for job site - Safety; German version EN 15027:2007 (Foreign Standard)
DIN EN 15027:2008
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components; German version EN 14879-5:2007 (FOREIGN STANDARD)
DIN EN 14879-5:2007
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components; German version EN 14879-4:2007 (FOREIGN STANDARD)
DIN EN 14879-4:2008
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components; German version EN 14879-3:2006 (FOREIGN STANDARD)
DIN EN 14879-3:2007
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components; German version EN 14879-2:2006 (FOREIGN STANDARD)
DIN EN 14879-2:2007
Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications; German version EN 14866:2005 (FOREIGN STANDARD)
DIN EN 14866:2006
Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification; German version EN 14864:2005+A1:2007 (FOREIGN STANDARD)
DIN EN 14864:2007
Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers (FOREIGN STANDARD)
DIN EN 14863:2006
Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds; German version EN 14730-2:2006 (FOREIGN STANDARD)
DIN EN 14730-2:2006
Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes; German version EN 14730-1:2006 (FOREIGN STANDARD)
DIN EN 14730-1:2006
Imperfections in thermoplastic welds - Classification (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN EN 14728:2005
Welding consumables - Welding consumables for hard-facing (FOREIGN STANDARD)
DIN EN 14700:2005
Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces; German version EN 14681:2006 (FOREIGN STANDARD)
DIN EN 14681:2007
Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals; German version EN 14673:2006 (FOREIGN STANDARD)
DIN EN 14673:2007
Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals; German version EN 14656:2006 (FOREIGN STANDARD)
DIN EN 14656:2007
Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (FOREIGN STANDARD)
DIN EN 14640:2005
Thermal spraying - Recommendations for thermal spraying (FOREIGN STANDARD)
DIN EN 14616:2005
Space product assurance - Verification and approval of automatic machine wave soldering (FOREIGN STANDARD)
DIN EN 14612:2004
Railway applications - Track - Flash butt welding of rails - Part 1: New R220, R260, R260Mn and R350HTgrade rails in a fixed plant; German version EN 14587-1:2007 (FOREIGN STANDARD)
DIN EN 14587-1:2007
Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys (FOREIGN STANDARD)
DIN EN 14532-3:2005
Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys (FOREIGN STANDARD)
DIN EN 14532-2:2005
Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys (FOREIGN STANDARD)
DIN EN 14532-1:2005
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems (FOREIGN STANDARD)
DIN EN 14483-5:2004
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (FOREIGN STANDARD)
DIN EN 14483-4:2004
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel (FOREIGN STANDARD)
DIN EN 14483-3:2004
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours EN 14483-2:2004 (FOREIGN STANDARD)
DIN EN 14483-2:2004
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature (FOREIGN STANDARD)
DIN EN 14483-1:2004
Vitreous and porcelain enamels - Characteristics of the enamel coatings applied to steel panels intended for architecture (FOREIGN STANDARD)
DIN EN 14431:2004
Vitreous and porcelain enamels - High voltage test (FOREIGN STANDARD)
DIN EN 14430:2004
Non-destructive testing of welds - Radiographic testing of welded joints (includes Amendment A1) (FOREIGN STANDARD)
DIN EN 1435:2002
DIN EN 14324:2004
Brazing - Guidance on the application of brazed joints (FOREIGN STANDARD)
Welding consumables - Wire and tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (FOREIGN STANDARD)
DIN EN 14295:2004
Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials (FOREIGN STANDARD)
DIN EN 1418:1998
Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000, modified) (FOREIGN STANDARD)
DIN EN 14163:2002
Safety of machine tools - Transfer and special purpose machines (FOREIGN STANDARD)
DIN EN 14070:2004
Safety of machine tools - Transfer and special-purpose machines; English version EN 14070:2003/prA1:2008 (Foreign Standard)
DIN EN 14070/A1:2008
DIN EN 1403:1998
Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements (FOREIGN STANDARD)
Machine tools - Safety - Guillotine shears (FOREIGN STANDARD)
DIN EN 13985:2003
Machine tools - Safety - Guillotine shears; English version EN 13985:2003/prA1:2008 (Foreign Standard)
DIN EN 13985/A1:2008
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed systems; German version EN 1395-7:2007 (FOREIGN STANDARD)
DIN EN 1395-7:2007
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems; German version EN 1395-6:2007 (FOREIGN STANDARD)
DIN EN 1395-6:2007
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers; German version EN 1395-5:2007 (FOREIGN STANDARD)
DIN EN 1395-5:2007
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying; German version EN 1395-4:2007 (FOREIGN STANDARD)
DIN EN 1395-4:2007
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying; German version EN 1395-3:2007 (FOREIGN STANDARD)
DIN EN 1395-3:2007
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVOF; German version EN 1395-2:2007 (FOREIGN STANDARD)
DIN EN 1395-2:2007
Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1: General requirements; German version EN 1395-1:2007 (FOREIGN STANDARD)
DIN EN 1395-1:2007
Machine tools - Safety - Sawing machines for cold metal (FOREIGN STANDARD)
DIN EN 13898:2004
Machine tools - Safety - Sawing machines for cold metal; English version EN 13898:2003/prA1:2008 (Foreign Standard)
DIN EN 13898/A1:2008
Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding (FOREIGN STANDARD)
DIN EN 13887:2003
Sherardizing - Zinc diffusion coatings on ferrous products - Specification (FOREIGN STANDARD)
DIN EN 13811:2003
Machine tools - Safety - Multi-spindle automatic turning machines; English version of DIN EN 13788 (FOREIGN STANDARD)
DIN EN 13788:2002
Safety requirements for coated abrasives; English version of DIN EN 13743 (FOREIGN STANDARD)
DIN EN 13743:2002
Safety of machine tools - Pneumatic presses; German version EN 13736:2003, Corrigenda to DIN EN 13736:2003-06; German version EN 13736:2003/AC:2004 (FOREIGN STANDARD)
DIN EN 13736 Berichtigung 1:2006
Safety of machine tools - Pneumatic presses (FOREIGN STANDARD)
DIN EN 13736:2003
Safety of machine tools - Pneumatic presses; English version EN 13736:2003/prA1:2008 (Foreign Standard)
DIN EN 13736/A1:2008
Welding of thermoplastics - Machines and equipment for hot gas welding (including extrusion welding) (FOREIGN STANDARD)
DIN EN 13705:2004
DIN EN 13603:2002
Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes (FOREIGN STANDARD)
DIN EN 13523-26:2006
Coil coated metals - Test methods - Part 26: Resistance to condensation of water; German version EN 13523-26:2006 (FOREIGN STANDARD)
DIN EN 13523-25:2006
Coil coated metals - Test methods - Part 25: Resistance to humidity; German version EN 13523-25:2006 (FOREIGN STANDARD)
DIN EN 13523-24:2005
Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking (FOREIGN STANDARD)
DIN EN 13523-20:2005
Coil coated metals - Test methods - Part 20: Foam adhesion (FOREIGN STANDARD)
DIN EN 13523-19:2005
Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing (FOREIGN STANDARD)
DIN EN 13523-17:2005
Coil coated metals - Test methods - Part 17: Adhesion of strippable films (FOREIGN STANDARD)
DIN EN 13523-16:2005
Coil coated metals - Test methods - Part 16: Resistance to abrasion (FOREIGN STANDARD)
DIN EN 13523-12:2005
Coil coated metals - Test methods - Part 12: Resistance to scratching (FOREIGN STANDARD)
DIN EN 13523-11:2005
Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) (FOREIGN STANDARD)
DIN EN 13523-0:2001
Coil coated metals - Test methods - Part 0: General introduction and list of test methods; English version of DIN EN 13523-0 (FOREIGN STANDARD)
Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; English version of DIN EN 13507 (FOREIGN STANDARD)
DIN EN 13507:2001
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials (FOREIGN STANDARD)
DIN EN 13479:2005
Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes (FOREIGN STANDARD)
DIN EN 13438:2006
DIN EN 13347:2003
Copper and copper alloys - Rod and wire for welding and braze welding (FOREIGN STANDARD)
Gas welding equipment - Small kits for gas brazing and welding (FOREIGN STANDARD)
DIN EN 1326:1996
Safety requirements for superabrasives; English version of DIN EN 13236 (FOREIGN STANDARD)
DIN EN 13236:2001
Safety requirements for superabrasives (FOREIGN STANDARD)
DIN EN 13236/A1:2005
Machine tools - Safety - Stationary grinding machines; German version EN 13218:2002+A1:2008+AC1:2008 (Foreign Standard)
DIN EN 13218:2008
Thermal spraying - Thermal spray coordination - Tasks and responsibilities; English version of DIN EN 13214 (FOREIGN STANDARD)
DIN EN 13214:2001
DIN EN 1321:1996
Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (FOREIGN STANDARD)
DIN EN 1320:1996
Destructive tests on welds in metallic materials - Fracture test (FOREIGN STANDARD)
Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test (FOREIGN STANDARD)
DIN EN 13144:2003
DIN EN 13134:2000
Brazing - Procedure approval; English version of DIN EN 13134 (FOREIGN STANDARD)
DIN EN 13133:2000
Brazing - Brazer approval; English version of DIN EN 13133 (FOREIGN STANDARD)
Safety of machine tools - Milling machines (including boring machines); German version EN 13128:2001+A1:2006 (FOREIGN STANDARD)
DIN EN 13128:2007
Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing (FOREIGN STANDARD)
DIN EN 13100-3:2005
Non-destructive testing of welded joints of thermoplastics semi-finished products - Part 2: X-ray radiographic testing; German version EN 13100-2:2004 (FOREIGN STANDARD)
DIN EN 13100-2:2005
Non-destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination; English version DIN EN 13100-1 (FOREIGN STANDARD)
DIN EN 13100-1:2000
Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies (FOREIGN STANDARD)
DIN EN 13067:2003
Machine tools - Safety - Electrodischarge machines; English version of DIN EN 12957 (FOREIGN STANDARD)
DIN EN 12957:2001
Machine tools - Safety - Electro Discharge Machines; English version EN 12957:2001/prA1:2008 (Foreign Standard)
DIN EN 12957/A1:2008
Filler materials for thermoplastics - Scope, designation, requirements, tests (FOREIGN STANDARD)
DIN EN 12943:1999
Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 4: Safety of machines using halogenated solvents (FOREIGN STANDARD)
DIN EN 12921-4:2005
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 4: Safety of machines using halogenated solvents; English version EN 12921-4:2005/prA1:2008 (FOREIGN STANDARD)
DIN EN 12921-4/A1:2008
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleanig liquids (FOREIGN STANDARD)
DIN EN 12921-3:2005
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids; English version EN 12921-3:2005/prA1:2008 (FOREIGN STANDARD)
DIN EN 12921-3/A1:2008
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids (FOREIGN STANDARD)
DIN EN 12921-2:2005
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids; English version EN 12921-2:2005/prA1:2008 (Foreign Standard)
DIN EN 12921-2/A1:2008
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (FOREIGN STANDARD)
DIN EN 12921-1:2005
Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels (includes Amendment A1:2002) (FOREIGN STANDARD)
DIN EN 1291:2002
Non-destructive testing of welds - Magnetic particle testing of welds (includes Amendment A1:2002) (FOREIGN STANDARD)
DIN EN 1290:2002
Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels (includes Amendment A1:2002) (FOREIGN STANDARD)
DIN EN 1289:2002
Founding - Equipment for the production of lost patterns for the lost wax casting process; English version of DIN EN 12883 (FOREIGN STANDARD)
DIN EN 12883:2001
Safety of machine tools - Manually controlled turning machines with or without automatic control; English version of DIN EN 12840 (FOREIGN STANDARD)
DIN EN 12840:2001
Testing of welded joints of thermoplastic semi-finished products - Part 8: Requirements; English version of DIN EN 12814-8 (FOREIGN STANDARD)
DIN EN 12814-8:2001
Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens (FOREIGN STANDARD)
DIN EN 12814-7:2003
Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; English version of DIN EN 12814-6 (FOREIGN STANDARD)
DIN EN 12814-6:2000
Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination; English version of DIN EN 12814-5 (FOREIGN STANDARD)
DIN EN 12814-5:2000
Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test; English version of DIN EN 12814-4 (FOREIGN STANDARD)
DIN EN 12814-4:2001
Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test (including Amendment A1:2005) (FOREIGN STANDARD)
DIN EN 12814-3:2005
Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test; English version of DIN EN 12814-2 (FOREIGN STANDARD)
DIN EN 12814-2:2000
DIN EN 12814-1 Berichtigung 1:2004
Corrigenda to DIN EN 12814-1:1999-12 (FOREIGN STANDARD)
Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test (FOREIGN STANDARD)
DIN EN 12814-1:1999
DIN EN 12799:2000
Brazing - Non-destructive examination of brazed joints; English version of DIN EN 12799 (FOREIGN STANDARD)
DIN EN 12797:2000
Brazing - Destructive tests of brazed joints; English version of DIN EN 12797 (FOREIGN STANDARD)
Thermal spraying - Powders - Composition, technical supply conditions (FOREIGN STANDARD)
DIN EN 1274:2005
Gas supply systems - Welding steel pipework - Functional requirements; English version of DIN EN 12732 (FOREIGN STANDARD)
DIN EN 12732:2000
Safety of machine tools - Drilling machines; English version of DIN EN 12717 (FOREIGN STANDARD)
DIN EN 12717:2002
Safety of machine tools - Drilling machines; English version EN 12717:2001/prA1:2008 (Foreign Standard)
DIN EN 12717/A1:2008
Safety of machine tools - Hydraulic press brakes; English version of DIN EN 12622 (FOREIGN STANDARD)
DIN EN 12622:2001
DIN EN 12540:2000
Corrosion protection of metals - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium; English version of DIN EN 12540 (FOREIGN STANDARD)
Welding consumables - Rods for gas welding of non-alloy and creep-resisting steels - Classification; English version of DIN EN 12536 (FOREIGN STANDARD)
DIN EN 12536:2000
Non-destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels; German version EN 12517-2:2008 (Foreign Standard)
DIN EN 12517-2:2008
Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels; German version EN 12517-1:2006 (FOREIGN STANDARD)
DIN EN 12517-1:2006
DIN EN 12487:2007
Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys; German version EN 12487:2007 (FOREIGN STANDARD)
Foundry machinery - Safety requirements for abrasive blasting equipment; English version of DIN EN 1248 (FOREIGN STANDARD)
DIN EN 1248:2002
Safety of machine tools - Large numerically controlled turning machines and turning centres; English version of DIN EN 12478 (FOREIGN STANDARD)
DIN EN 12478:2001
Phosphate conversion coatings of metals - Method of specifying requirements; English version of DIN EN 12476 (FOREIGN STANDARD)
DIN EN 12476:2001
Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines (FOREIGN STANDARD)
DIN EN 1247:2004
Machine tools - Safety - Machining centres; German version EN 12417:2001+A1:2006 (FOREIGN STANDARD)
DIN EN 12417:2007
Machine tools - Safety - Machining centres; English version EN 12417:2001/prA2:2008 (Foreign Standard)
DIN EN 12417/A2:2008
Safety requirements for bonded abrasive products; German version EN 12413:2007 (FOREIGN STANDARD)
DIN EN 12413:2007
DIN EN 12373-9:1999
Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus (FOREIGN STANDARD)
DIN EN 12373-8:1999
Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings (FOREIGN STANDARD)
DIN EN 12373-7:2002
Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment (FOREIGN STANDARD)
DIN EN 12373-6:1999
Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment (FOREIGN STANDARD)
DIN EN 12373-5:1999
Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (FOREIGN STANDARD)
DIN EN 12373-3:1999
Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (FOREIGN STANDARD)
DIN EN 12373-2:1999
Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (FOREIGN STANDARD)
DIN EN 12373-19:2001
Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting corrosion; Grid method; English version of DIN EN 12373-19 (FOREIGN STANDARD)
DIN EN 12373-18:2001
Aluminium and aluminium alloys - Anodizing - Part 18: Rating system for the evaluation of pitting corrosion; Chart method; English version of DIN EN 12373-18 (FOREIGN STANDARD)
DIN EN 12373-17:2001
Aluminium and aluminium alloys - Anodizing - Part 17: Determination of electric breakdown potential; English version of DIN EN 12373-17 (FOREIGN STANDARD)
DIN EN 12373-16:2001
Aluminium and aluminium alloys - Anodizing - Part 16: Check for continuity of thin anodic oxidation coatings Copper sulfate test; English version of DIN EN 12373-16 (FOREIGN STANDARD)
DIN EN 12373-15:2000
Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation; English version of DIN EN 12373-15 (FOREIGN STANDARD)
DIN EN 12373-14:2000
Aluminium and aluminium alloys - Anodizing - Part 14: Visual determination of image clarity of anodic oxidation coatings - Chart scale method; English version of DIN EN 12373-14 (FOREIGN STANDARD)
DIN EN 12373-13:2000
Aluminium and aluminium alloys - Anodizing - Part 13: Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer; English version of DIN EN 12373-13 (FOREIGN STANDARD)
DIN EN 12373-12:2000
Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments; English version of DIN EN 12373-12 (FOREIGN STANDARD)
DIN EN 12373-11:2000
Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20?, 45?, 60? or 85?; English version of DIN EN 12373-11 (FOREIGN STANDARD)
DIN EN 12373-10:1999
Aluminium and aluminium alloy - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus (FOREIGN STANDARD)
DIN EN 12373-1:2001
Aluminium and aluminium alloys - Anodizing - Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium; English version of DIN EN 12373-1 (FOREIGN STANDARD)
DIN EN 12348:2000
Core drilling machines on stand - Safety; English version of DIN EN 12348 (FOREIGN STANDARD)
DIN EN 12330:2000
Corrosion protection of metals - Electrodeposited coatings of cadmium on iron or steel; English version of DIN EN 12330 (FOREIGN STANDARD)
Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes; English version of DIN EN 12074 (FOREIGN STANDARD)
DIN EN 12074:2000
Non-destructive testing of welds - General rules for metallic materials (includes Amendment A1) (FOREIGN STANDARD)
DIN EN 12062:2002
Power-driven brushes -Part 2: Safety requirements (FOREIGN STANDARD)
DIN EN 1083-2:1997
Fluxes for brazing - Classification and technical delivery conditions (FOREIGN STANDARD)
DIN EN 1045:1997
DIN EN 1044:1999
Brazing - Filler metals (FOREIGN STANDARD)
Hardness testing of welds in metallic materials - Part 2: Micro hardness testing on welded joints (FOREIGN STANDARD)
DIN EN 1043-2:1996
Hardness testing of welds in metallic materials - Hardness test on arc welded joints (FOREIGN STANDARD)
DIN EN 1043-1:1996
Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire (FOREIGN STANDARD)
DIN EN 10245-4:2003
Steel wire and wire products - Organic coatings on wire - Part 3: PE coated wire; English version of DIN EN 10245-3 (FOREIGN STANDARD)
DIN EN 10245-3:2001
Steel wire and wire products - Organic coatings on wire - Part 2: PVC coated wire; English version of DIN EN 10245-2 (FOREIGN STANDARD)
DIN EN 10245-2:2001
Steel wire and wire products - Organic coatings on wire - Part 1: General rules; English version of DIN EN 10245-1 (FOREIGN STANDARD)
DIN EN 10245-1:2001
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings; Enlgish version of DIN EN 10244-6 (FOREIGN STANDARD)
DIN EN 10244-6:2001
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings; Enlgish version of DIN EN 10244-5 (FOREIGN STANDARD)
DIN EN 10244-5:2001
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings; English version of DIN EN 10244-4 (FOREIGN STANDARD)
DIN EN 10244-4:2001
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings; English version of DIN EN 10244-3 (FOREIGN STANDARD)
DIN EN 10244-3:2001
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings; English version of DIN EN 10244-2 (FOREIGN STANDARD)
DIN EN 10244-2:2001
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles; English version of DIN EN 10244-1 (FOREIGN STANDARD)
DIN EN 10244-1:2001
DIN EN 10169-3:2003
Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications (FOREIGN STANDARD)
DIN EN 10169-2:2006
Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications; German version EN 10169-2:2006 (FOREIGN STANDARD)
DIN EN 10169-1:2004
Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) (FOREIGN STANDARD)
Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons (FOREIGN STANDARD)
DIN EN 1011-8:2005
Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding (FOREIGN STANDARD)
DIN EN 1011-7:2004
Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding (FOREIGN STANDARD)
DIN EN 1011-6:2006
Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel (FOREIGN STANDARD)
DIN EN 1011-5:2003
Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys; English version of DIN EN 1011-4 (FOREIGN STANDARD)
DIN EN 1011-4:2001
Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels; English version of DIN EN 1011-3 (FOREIGN STANDARD)
DIN EN 1011-3:2001
Recommendation for welding of metallic materials - Part 2: Arc welding of ferritic steels; English version of DIN EN 1011-2 (FOREIGN STANDARD)
DIN EN 1011-2:2001
Recommendations for welding of metallic materials - Part 1: General guidance for arc welding (includes amendment A1:2002) (FOREIGN STANDARD)
DIN EN 1011-1:2002
Vocabulary of heat treatment terms for ferrous products (FOREIGN STANDARD)
DIN EN 10052:1994
Side milling cutters; technical delivery conditions (FOREIGN STANDARD)
DIN 885-2:1990
DIN 884-2:1990
Cylindrical milling cutters; technical delivery conditions (FOREIGN STANDARD)
Machine tools; straight sided power presses; acceptance conditions (FOREIGN STANDARD)
DIN 8651:1990
Machine tools; grinding spindles with cartridge diameters up to 200 mm; acceptance conditions (FOREIGN STANDARD)
DIN 8637:1990
DIN 8635:1971
Acceptance Conditions for Machine Tools; Vertical Honing Machines up to 500 mm Length of Stroke (FOREIGN STANDARD)
Machine tools - External cylindrical centreless grinding machines - Acceptance conditions (FOREIGN STANDARD)
DIN 8634:1994
Machine Tools; Surface Grinding Machines; Surface Grinding Machines with Two Columns; Grinding-machines for Grinding Slideways; Acceptance Conditions (FOREIGN STANDARD)
DIN 8632-4:1978
Machine Tools; Surface Grinding Machines with Horizontal Grinding Wheel Spindle, with Round Table; Acceptance Conditions (FOREIGN STANDARD)
DIN 8632-3:1976
Machine tools; surface grinding machines with horizontal grinding wheel spindle and rectangular reciprocating table; acceptance conditions (FOREIGN STANDARD)
DIN 8632-1:1989
Machine tools; external cylindrical grinding machines with a movable workpiece table; acceptance conditions (FOREIGN STANDARD)
DIN 8630:1988
Machine Tools; Vertical Drilling Machines; Pillar Type Drilling Machines; Acceptance Conditions (FOREIGN STANDARD)
DIN 8626-2:1976
Machine Tools; Vertical Drilling Machines; Box Type Drilling Machines; Acceptance Conditions (FOREIGN STANDARD)
DIN 8626-1:1976
Machine Tools; Radial Drilling Machines with Adjustable Arm; Acceptance conditions (FOREIGN STANDARD)
DIN 8625-1:1976
Machine Tools; Boring and Millung Machines with Horizontal Spindle; Table-Type Machines; Rotary Tables; Acceptance Conditions (FOREIGN STANDARD)
DIN 8620-3:1980
Machine Tools; Milling Machines with Vertical Spindle and Fixed Table; Acceptance Conditions (FOREIGN STANDARD)
DIN 8615-4:1979
Machine Tools; Milling Machines with Horizontal Spindle and Fixed Table; Acceptance Conditions (FOREIGN STANDARD)
DIN 8615-3:1979
Machine Tools; Horizontal Automatic Lathes; Swiss-Type Automatic Lathes; Acceptance Conditions (FOREIGN STANDARD)
DIN 8611-3:1976
Machine Tools; Horizontal Automatic Lathes; Front-loaded; Acceptance Conditions (FOREIGN STANDARD)
DIN 8611-2:1976
Machine Tools; Horizontal Single-spindle Automatic Lathes; Acceptance Conditions (FOREIGN STANDARD)
DIN 8611-1:1976
Machine Tools; Lathes of Normal Accuracy, Swing above 800 up to 1600 mm; Acceptance Conditions (FOREIGN STANDARD)
DIN 8607:1976
Machine Tools; Lathes of Normal Accuracy; Swing up to 800 mm; Acceptance Conditions (FOREIGN STANDARD)
DIN 8606:1976
Machine Tools; Lathes of High Accuracy Swing up to 500 mm, Turning Length up to 1500 mm, Acceptance Conditions (FOREIGN STANDARD)
DIN 8605:1976
Metal-cutting Tools; Milling Cutters, Rotation, Flute Direction, End Thrust (FOREIGN STANDARD)
DIN 857:1951
DIN 856-2:1990
Convex milling cutters; technical delivery conditions (FOREIGN STANDARD)
Welding of Vessels; Vessels of Metallic Materials, Principles for Welding (FOREIGN STANDARD)
DIN 8562:1975
Semi-circular Profile Milling Cutters, Convex; Dimensions (FOREIGN STANDARD)
DIN 856-1:1978
DIN 855-2:1990
Concave milling cutters; technical delivery conditions (FOREIGN STANDARD)
Semi-circular Profile Milling Cutters, Concave; Dimensions (FOREIGN STANDARD)
DIN 855-1:1978
Testing of Soldering Joints; Gap Soldered Joints, Shear Test, Creep Shear Test (FOREIGN STANDARD)
DIN 8526:1977
DIN 852-2:1990
Bore type thread milling cutters for ISO metric threads; technical delivery conditions (FOREIGN STANDARD)
Production Processes of Autogenous Engineering; Survey (FOREIGN STANDARD)
DIN 8522:1980
DIN 852-1:1991
Bore type thread milling cutters for ISO metric threads; dimensions (FOREIGN STANDARD)
DIN 8519:1996
Annular and elongated projections for resistance welding of sheet steel (FOREIGN STANDARD)
T-slot cutters; technical delivery conditions (FOREIGN STANDARD)
DIN 851-3:1990
T-slot cutters with Morse taper shanks; dimensions (FOREIGN STANDARD)
DIN 851-2:1991
T-slot cutters with parallel shanks; dimensions (FOREIGN STANDARD)
DIN 851-1:1991
Woodruff cutters; technical delivery conditions (FOREIGN STANDARD)
DIN 850-2:1990
Double equal-angle milling cutters; technical delivery conditions (FOREIGN STANDARD)
DIN 847-2:1990
Double Equal-Angle Milling Cutters; Dimensions (FOREIGN STANDARD)
DIN 847-1:1978
Morse taper shank end mills; technical delivery conditions (FOREIGN STANDARD)
DIN 845-2:1990
Parallel shank end mills; technical delivery conditions (FOREIGN STANDARD)
DIN 844-2:1990
Parallel shank end mills; dimensions (FOREIGN STANDARD)
DIN 844-1:1989
Single-angle milling cutters; dimensions (FOREIGN STANDARD)
DIN 842-1:1984
Machine-reamers with parallel shanks with carbide tips, with long cutting part (FOREIGN STANDARD)
DIN 8093:1997
Lathe centres 60? with extractor nut (FOREIGN STANDARD)
DIN 807:1966
DIN 806:1971
60? lathe centres without extractor nut (FOREIGN STANDARD)
Machine-reamers with parallel shanks with carbide tips, with short cutting part (FOREIGN STANDARD)
DIN 8050:1997
Side Milling Cutters with Exchangeable Blades; Carbide-tipped (FOREIGN STANDARD)
DIN 8048:1956
Side Milling Cutters; Carbide-tipped (FOREIGN STANDARD)
DIN 8047:1956
Twist Drills with Morse Taper Shank with Carbide Tips for Drilling Metal (FOREIGN STANDARD)
DIN 8041:1971
Machine Tools; On-load Speeds for Machine Tools; Nominal Values, Limiting Values, Transmission Ratios (FOREIGN STANDARD)
DIN 804:1977
Twist Drills with Parallel Shank with Carbide Tips for Drilling Plastics (Thermosetting Plastics) (FOREIGN STANDARD)
DIN 8038:1971
Twist Drills with Parallel Shank with Carbide Tips for Drilling Metal (FOREIGN STANDARD)
DIN 8037:1971
Machine Tools; Feeds for Machine Tools; Nominal Values, Limiting Values, Transmission Ratios (FOREIGN STANDARD)
DIN 803:1977
Tolerances on the threaded portion of taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts according to DIN 8140 for ISO metric coarse and fine pitch threads; Manufacturing tolerances on the threaded portion (FOREIGN STANDARD)
DIN 802-6:2003
Manufacturing tolerances for the threaded portion of screwing taps - Ground taps for ISO metric threads - Interference fit threads as in DIN 8141-1 (FOREIGN STANDARD)
DIN 802-5:1997
DIN 8013:1963
Carbide Tips for Drills; Point Angle 85? for Light Loading (FOREIGN STANDARD)
DIN 8012:1972
Carbide Inserts for Centre Points (FOREIGN STANDARD)
DIN 8010:1963
Carbide Tips for Drills; Point Angle 115? for Heavy Loading (FOREIGN STANDARD)
Metal-cutting Tools; Hobs for Spur Gears, with Clutch Drive Slot or Keyway, Modules 1 to 20 (FOREIGN STANDARD)
DIN 8002:1955
DIN 8000:1962
Design Dimensions and Errors of Hobs for Involute Spur Gears; Fundamental Terms (FOREIGN STANDARD)
High Speed Steel Tips for Lathe and Planer Tools (FOREIGN STANDARD)
DIN 771:1962
Shank Sections for Lathe and Planer Tools; Machined All Over, Not Required to Meet Special Standards of Accuracy (FOREIGN STANDARD)
DIN 770-2:1962
Shank Sections for Lathe and Planer Tools; Rolled and Forged Shanks (FOREIGN STANDARD)
DIN 770-1:1962
Screwdrivers for Hexagon Insert Bits (FOREIGN STANDARD)
DIN 7431:1978
Machine Tools; External Cylindrical Grinding Machines; Definitions and Terms (FOREIGN STANDARD)
DIN 69718-1:1976
Machine Tools; Modular Units; Support Brackets, Constructural Sizes (FOREIGN STANDARD)
DIN 69524:1979
Machine Tools; Modular Units; Centre Bases for Longitudinal Cycle Machines, Constructional Sizes (FOREIGN STANDARD)
DIN 69521:1979
Machine tools; Multi-spindle heads; Gears Type A (FOREIGN STANDARD)
DIN 69001-52:1981
Machine tools; Multi-spindle heads; Bearing bushes Type A (FOREIGN STANDARD)
DIN 69001-51:1981
Machine tools; Multi-spindle heads; Sleeves Type A (FOREIGN STANDARD)
DIN 69001-50:1981
Machine tools; Multi-spindle heads; Step rings Types A and B (FOREIGN STANDARD)
DIN 69001-49:1981
Machine tools; Multi-spindle heads; Gauge rings Type A (FOREIGN STANDARD)
DIN 69001-48:1981
Machine tools; Multi-spindle heads; Keys Type A (FOREIGN STANDARD)
DIN 69001-46:1981
Machine tools; Multi-spindle heads; Clamping pieces Type A (FOREIGN STANDARD)
DIN 69001-45:1981
Machine tools; Multi-spindle heads; Pinion sleeves Types A and B (FOREIGN STANDARD)
DIN 69001-43:1981
Machine tools; Multi-spindle heads; Drive sleeves Type A (FOREIGN STANDARD)
DIN 69001-42:1981
Machine tools; Multi-spindle heads; Guide sleeves Type A (FOREIGN STANDARD)
DIN 69001-41:1981
Machine tools; Multi-spindle heads; Protection rings Type A (FOREIGN STANDARD)
DIN 69001-39:1981
Machine tools; Multi-spindle heads; Mounting rings Types A to D (FOREIGN STANDARD)
DIN 69001-38:1981
Machine tools; Multi-spindle heads; Covers Types A and B (FOREIGN STANDARD)
DIN 69001-35:1981
Machine tools; Multi-spindle heads; Tapping spindles Type A (FOREIGN STANDARD)
DIN 69001-34:1981
Machine tools; Multi-spindle heads; Boring spindles Types A and B (FOREIGN STANDARD)
DIN 69001-33:1981
Machine tools; Multi-spindle heads; Intermediate shafts Types A to G (FOREIGN STANDARD)
DIN 69001-32:1981
Machine tools; Multi-spindle heads; Driving pinions Type A (FOREIGN STANDARD)
DIN 69001-31:1981
Machine tools; Multi-spindle heads; Assemblies, Spindle drives, Types A to F (FOREIGN STANDARD)
DIN 69001-16:1981
Machine tools; Multi-spindle heads; Assemblies, Tapping spindles, Type A (FOREIGN STANDARD)
DIN 69001-15:1981
Machine tools; Multi-spindle heads; Assemblies, Spindle seals Types A to D (FOREIGN STANDARD)
DIN 69001-14:1981
Machine tools; Multi-spindle heads; Assemblies, Boring spindles Types A to D (FOREIGN STANDARD)
DIN 69001-13:1981
Machine tools; Multi-spindle heads; Assemblies, Intermediate shafts Types A to P (FOREIGN STANDARD)
DIN 69001-12:1981
Drills with type A hollow taper shanks and coolant supply as in DIN 69893-1, with indexable inserts - Designation (FOREIGN STANDARD)
DIN 6596:1998
Drills with type A hollow taper shanks and coolant supply as in DIN 69893-1, with indexable inserts - Main dimensions (FOREIGN STANDARD)
DIN 6594:1998
DIN 65582:1990
Aerospace; heat treatment of aluminium- and magnesium-alloy castings (FOREIGN STANDARD)
DIN 65570:1990
Aerospace; heat treatment facilities; general requirements (FOREIGN STANDARD)
DIN 65471:1991
Aerospace; filler metals for welding titanium and titanium alloys; filler rods and filler wires; dimensions, masses (FOREIGN STANDARD)
DIN 65470:1989
Aerospace; filler metals for welding metallic materials; technical specification (FOREIGN STANDARD)
Technical delivery conditions for DIN 6537 and DIN 6539 solid hardmetal twist drills - Checking of dimensions (FOREIGN STANDARD)
DIN 6540-2:1993
Technical delivery conditions for DIN 6537 and DIN 6539 solid hardmetal twist drills - Requirements (FOREIGN STANDARD)
DIN 6540-1:1993
DIN 6539:1991
Continuous parallel shank solid hardmetal twist drills; dimensions (FOREIGN STANDARD)
Reinforced parallel shank twist drills with hardmetal cutting edges - Dimensions (FOREIGN STANDARD)
DIN 6538-1:1993
Stepped parallel shank solid hardmetal twist drills - Dimensions (FOREIGN STANDARD)
DIN 6537:1993
Parallel shanks for hardmetal twist drills and end mills; dimensions (FOREIGN STANDARD)
DIN 6535:1992
Parallel shank solid hardmetal end mills; technical delivery conditions (FOREIGN STANDARD)
DIN 6529:1992
Solid hardmetal end mills with continuous parallel shank - Dimensions (FOREIGN STANDARD)
DIN 6528:2002
Solid hardmetal end mills with stepped parallel shank - Dimensions (FOREIGN STANDARD)
DIN 6527:2002
DIN 6518-2:1990
Corner rounding concave milling cutters with parallel shank; technical delivery conditions (FOREIGN STANDARD)
DIN 6518-1:1989
Corner rounding concave milling cutters with parallel shank; dimensions (FOREIGN STANDARD)
DIN 65153:1997
Aerospace - Acceptance testing of plasma arc welding equipment (FOREIGN STANDARD)
DIN 6513-2:1990
Corner rounding concave cutters; technical delivery conditions (FOREIGN STANDARD)
T-slots for T-head bolts (FOREIGN STANDARD)
DIN 649:1987
DIN 6370:1957
Clamping Devices; Machine Vices, Capacities, Mating Dimensions, Permissible Variations, Jaws (FOREIGN STANDARD)
Lathe Chucks, Power-operated, without Trough-hole (FOREIGN STANDARD)
DIN 6353:1977
DIN 6352-1:1968
Chuck backplates with 1 : 4 Locating Taper; Basic Flanges (FOREIGN STANDARD)
Lathe Chucks, Hand-operated; Jaws also Individually Adjustable, Mounting Recess with 1 : 4 Taper (FOREIGN STANDARD)
DIN 6351-2:1969
Lathe Chucks, Hand-operated; Jaws also Individually Adjustable with Cylindrical Mounting Recess (FOREIGN STANDARD)
DIN 6351-1:1968
Lathe Chucks, Hand-operated; Jaws not Individually Adjustable, Mounting recess with 1 : 4 Taper (FOREIGN STANDARD)
DIN 6350-2:1969
Lathe Chucks, Hand-operated; Jaws not Individually Adjustable, with Cylindrical Mounting Recess (FOREIGN STANDARD)
DIN 6350-1:1968
Drilling Jigs; Quick-clamping (FOREIGN STANDARD)
DIN 6348:1971
Parallels (FOREIGN STANDARD)
DIN 6346:1997
Machine Tools; Spinning and Planishing Lathes; Acceptance Conditions (FOREIGN STANDARD)
DIN 55803:1979
Machine Tools; Folding Machines; Acceptance Conditions (FOREIGN STANDARD)
DIN 55802:1979
DIN 55666:1995
Determining the equilibrium concentration of formaldehyde in a small test chamber when released from coatings, melamine foams and textiles (FOREIGN STANDARD)
Machine Tools; Swivel Bending Machine; Sizes (FOREIGN STANDARD)
DIN 55220:1980
Machine tools; straight sided high speed mechanical presses with nominal forces from 250 kN to 4000 kN; sizes (FOREIGN STANDARD)
DIN 55185:1983
Machine tools; straight sided single acting mechanical presses with nominal forces from 400 kN to 4000 kN; sizes (FOREIGN STANDARD)
DIN 55181:1983
Open-Front Bench Type Eccentric Presses; Sizes (FOREIGN STANDARD)
DIN 55170:1961
Spindle Noses for Adjustable Adapters; Connecting Dimensions (FOREIGN STANDARD)
DIN 55058:1978
Machine Tools; Spindle Noses and Face Plates with Centering Taper; Camlock Type, Accessories; Dimensions (FOREIGN STANDARD)
DIN 55029:1980
Machine Tools; Mountings for Clamping Devices; Connecting Dimensions for Spindle Noses according to DIN 55026 and DIN 55027 (FOREIGN STANDARD)
DIN 55028:1980
Machine Tools; Spindle Noses with Centering Taper, Face Plate and Bayonet Type Fastening, Accessories; Dimensions (FOREIGN STANDARD)
DIN 55027:1980
Machine Tools; Spindle Noses with Centering Taper and Flange; Dimensions (FOREIGN STANDARD)
DIN 55026:1980
Lathe Mandrels; Mandrels for Workpiece-mounting (FOREIGN STANDARD)
DIN 523:1974
DIN 51032:1986
Ceramics, glass, glass ceramics, vitreous enamels; permissible limits for the release of lead and cadmium from articles intended for use in contact with foodstuffs (FOREIGN STANDARD)
Testing of metallic coatings; adherence of hot-dip zinc coatings (FOREIGN STANDARD)
DIN 50978:1985
Electrodeposited tin coatings on ferrous and copper and copper alloy products (FOREIGN STANDARD)
DIN 50965:2000
Modified corrodkote test for electrodeposited coatings (FOREIGN STANDARD)
DIN 50958:2001
DIN 50938:2000
Black oxide treatment of ferrous products - Requirements and testing (FOREIGN STANDARD)
Metallic Coatings; Pores, Inclusions, Blisters and Cracks, Definitions (FOREIGN STANDARD)
DIN 50903:1967
Testing the wear and effectiveness of metallic abrasives by centrifugal blasting (FOREIGN STANDARD)
DIN 50315:1988
Sulfur dioxide corrosion testing in a saturated atmosphere (FOREIGN STANDARD)
DIN 50018:1997
High Speed Steel Tool Holder Bits (FOREIGN STANDARD)
DIN 4964-1:1962
Straight Cutting Tools for Lathe Work with High Speed Steel Cutting Edges (FOREIGN STANDARD)
DIN 4951:1962
Tools for solderless electrical connections; hand crimping tools; concepts, requirements, testing (FOREIGN STANDARD)
DIN 41641-1:1983
Tolerances for Single-start Hobs for Involute Spur Gears (FOREIGN STANDARD)
DIN 3968:1960
DIN 347:1962
Countersinks with 120? Point Angle (FOREIGN STANDARD)
Drills for use prior to tapping screw threads (FOREIGN STANDARD)
DIN 336:2003
DIN 333:1986
60? centre drills; types R, A, and B (FOREIGN STANDARD)
Machine tools; 60? centre holes; dimensioning (FOREIGN STANDARD)
DIN 332-7:1982
DIN 332-4:1990
Centre holes for rail vehicles axles (FOREIGN STANDARD)
DIN 332-1:1986
60? centre holes; types R, A, B, and C (FOREIGN STANDARD)
Parallel shank slot drills; technical delivery conditions (FOREIGN STANDARD)
DIN 327-2:1990
Parallel shank slot drills; dimensions (FOREIGN STANDARD)
DIN 327-1:1989
Flame cleaning of steel and concrete surfaces (FOREIGN STANDARD)
DIN 32539:1998
Testing of filler metals by means of weld metal specimens; test piece for determining the hardness for surfacing (FOREIGN STANDARD)
DIN 32525-4:1985
Testing of solderability for soft soldering; Vertical dipping test for pre-tinned specimens; Testing; Assessment (FOREIGN STANDARD)
DIN 32506-3:1981
Testing of solderability for soft soldering; Vertical dipping test for specimens of copper alloys; Testing; Assessment (FOREIGN STANDARD)
DIN 32506-2:1981
Testing of Solderability for Soft Soldering; Wetting tests (FOREIGN STANDARD)
DIN 32506-1:1981
DIN 311:1975
Bridge Reamers with Morse Taper Shank (FOREIGN STANDARD)
DIN 29850:1989
Aerospace; heat treatment of wrought aluminium alloys (FOREIGN STANDARD)
Nonmetallic protective coatings and linings for precast concrete members used in process plant - Composite coating or lining systems (FOREIGN STANDARD)
DIN 28052-5:1997
Weld preparation - Inside diameters of seamless stainless steel pipes (FOREIGN STANDARD)
DIN 2559-4:1994
Preparation of welds - Part 3: Matching of inside diameters for circumferential welds on welded pipes (Foreign Standard)
DIN 2559-3:2007
Edge preparation for welding - Part 2: Matching of inside diameter for circumferential welds on seamless pipes (Foreign Standard)
DIN 2559-2:2007
Remote handling devices for use behind shielding walls; Power manipulators, Operating elements; Arrangement and marking (FOREIGN STANDARD)
DIN 25409-8:1982
End mills with 7/24 taper shanks - Technical delivery conditions (FOREIGN STANDARD)
DIN 2328-2:1999
End mills with 7/24 taper shanks - Dimensions (FOREIGN STANDARD)
DIN 2328-1:1996
Specification and approval of laser beam surface treatment using additional materials - Part 1: Laser surface treatment specification using consumables (FOREIGN STANDARD)
DIN 2311-1:1998
Welding consumables - Welding consumables for underwater hyperbaric wet welding of unalloyed and fine grain steels - Acceptance specifications for testing and qualification of welding consumables for underwater hyperbaric wet welding (FOREIGN STANDARD)
DIN 2302:2005
Machine Taper Pin Reamers with Morse Taper Shanks (FOREIGN STANDARD)
DIN 2180:1975
Machine Taper Pin Reamers with Parallel Shanks (FOREIGN STANDARD)
DIN 2179:1975
Machine Reamers with Screwed-on Blades (FOREIGN STANDARD)
DIN 209:1979
DIN 2083-1:1980
Bearing Sleeves for Milling Machine Arbors, for Milling Cutters with Longitudinal Keyway (FOREIGN STANDARD)
DIN 2080-1:1978
7/24 Taper Shanks for Tools and Clamping Devices, Type A (FOREIGN STANDARD)
Machine chucking reamers with Morse taper shanks (FOREIGN STANDARD)
DIN 208:1981
DIN 2079:1987
7/24 tapers for spindle noses for machine tools (FOREIGN STANDARD)
Graphical Representation of Welded, Soldered and Brazed Joints; Concepts and Terms for Soldered and Brazed Joints and Seams (FOREIGN STANDARD)
DIN 1912-4:1981
Welding; Welding of Plastics, Processes (FOREIGN STANDARD)
DIN 1910-3:1977
Machine Reamers for Metric Tapers (FOREIGN STANDARD)
DIN 1896:1975
Side and face thread milling cutters for ISO metric trapezoidal threads; technical delivery conditions (FOREIGN STANDARD)
DIN 1893-2:1990
Interlocking cylindrical cutters; technical delivery conditions (FOREIGN STANDARD)
DIN 1892-2:1990
Interlocking slotting cutters; technical delivery conditions (FOREIGN STANDARD)
DIN 1891-2:1990
Straight relieved tooth slotting cutters; technical delivery conditions (FOREIGN STANDARD)
DIN 1890-2:1990
DIN 1889-5:1990
Die-sinking cutters; technical delivery conditions (FOREIGN STANDARD)
Tapered die-sinking cutters with parallel shank (FOREIGN STANDARD)
DIN 1889-3:1989
DIN 1889-1:1989
Cylindrical die-sinking cutters with parallel shank (FOREIGN STANDARD)
Shell end mills with tenon and key drive - Dimensions (FOREIGN STANDARD)
DIN 1880-1:1993
DIN 1868:1975
Detachable Pilots for Counterbores and Countersinks (FOREIGN STANDARD)
DIN 1863:1962
Countersinks for Countersunk Head Rivets (FOREIGN STANDARD)
End Mill Reamers for Jig Boring Machines (FOREIGN STANDARD)
DIN 1862:1962
DIN 1840:1970
Circular Metal Slitting Saw Blades; Tooth Forms, Side Clearance, Manufacturing Tolerances (FOREIGN STANDARD)
DIN 1838:1970
Circular Metal Slitting Saw Blades; Coarse-toothed (FOREIGN STANDARD)
DIN 1837:1970
Circular Metal Slitting Saw Blades; Fine-toothed (FOREIGN STANDARD)
DIN 1835-2:2000
Cylindrical shanks for milling cutters - Part 2: Mating dimensions for chucks and accessories (FOREIGN STANDARD)
DIN 1835-1:1999
Cylindrical shanks for milling cutters - Dimensions (FOREIGN STANDARD)
Narrow side and face milling cutters; technical delivery conditions (FOREIGN STANDARD)
DIN 1834-2:1990
Parallel shank dovetail cutters; technical delivery conditions (FOREIGN STANDARD)
DIN 1833-2:1990
Inverse dovetail cutters and dovetail cutters with parallel shank; dimensions (FOREIGN STANDARD)
DIN 1833-1:1989
Inserted tooth side and face milling cutters; technical delivery consitions (FOREIGN STANDARD)
DIN 1831-2:1990
Single-angle cutters for toolmaking; technical delivery conditions (FOREIGN STANDARD)
DIN 1823-2:1992
DIN 1823-1:1978
Angular Milling Cutters for Toolmaking; Dimensions (FOREIGN STANDARD)
Tap Wrenches; Adjustable (FOREIGN STANDARD)
DIN 1814:1979
Driving Tenons for Tools with Parallel Shank (FOREIGN STANDARD)
DIN 1809:1961
DIN 17611:2007
Anodized products of wrought aluminium and wrought aluminium alloys - Technical conditions of delivery (Foreign Standard)
Filler metals for aluminium and aluminium alloys - Part 3: Test pieces, test specimens, mechanical and technological properties of all-weld metal (FOREIGN STANDARD)
DIN 1732-3:2007
Heat treatment of ferrous materials - Part 5: Surface hardening (FOREIGN STANDARD)
DIN 17022-5:2000
Heat treatment of ferrous materials - Part 4: Nitriding and nitrocarburizing (FOREIGN STANDARD)
DIN 17022-4:1998
Heat treatment of ferrous materials; heat treatment methods; case hardening (FOREIGN STANDARD)
DIN 17022-3:1989
Heat treatment of ferrous materials; heat treatment methods; hardening and tempering of tools (FOREIGN STANDARD)
DIN 17022-2:1986
Heat treatment of ferrous products - Hardening and tempering (FOREIGN STANDARD)
DIN 17022-1:1994
Heat Treatment of Ferrous Metals; Material Selection; Steel Selection according to Hardenability (FOREIGN STANDARD)
DIN 17021-1:1976
Heat treatment of ferrous materials; notation to indicate heat treatment processes (FOREIGN STANDARD)
DIN 17014-3:1976
Welding of Thermoplastics; Principles (FOREIGN STANDARD)
DIN 16960-1:1974
Reamers; Manufacturing Tolerances and Designation (FOREIGN STANDARD)
DIN 1420:1966
Technical delivery conditions for high-speed steel twist drills - Inspection (FOREIGN STANDARD)
DIN 1414-2:1998
High-speed steel broaching tools - Technical delivery conditions (FOREIGN STANDARD)
DIN 1409:2000
Driving squares for rotating tools with parallel shanks (FOREIGN STANDARD)
DIN 10:1997
DIN Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
