DIN Standards Catalogue
DIN EN 912:2001
Timber fasteners - Specifications for connectors for timber (includes corrigendum AC:2000); English version of DIN EN 912:1999 + AC:2000 (FOREIGN STANDARD)
DIN EN 28839:1991
Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986) (FOREIGN STANDARD)
Determination of shear strength of pins (ISO 8749:1986) (FOREIGN STANDARD)
DIN EN 28749:1992
DIN EN 28738:1992
Plain washers for clevis pins; product grade (ISO 8738:1986) (FOREIGN STANDARD)
DIN EN 28737:1992
Unhardened taper pins with external thread (ISO 8737:1986) (FOREIGN STANDARD)
DIN EN 28736:1992
Unhardened taper pins with internal thread (ISO 8736:1986) (FOREIGN STANDARD)
Countersunk head screws; head configuration and gauging (ISO 7721:1983) (FOREIGN STANDARD)
DIN EN 27721:1992
DIN EN 27436:1992
Slotted set screws with cup point (ISO 7436:1983) (FOREIGN STANDARD)
DIN EN 27435:1992
Slotted set screws with long dog point (ISO 7435:1983) (FOREIGN STANDARD)
DIN EN 27434:1992
Slotted set screws with cone point (ISO 7434:1983) (FOREIGN STANDARD)
DIN EN 26157-3:1991
Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988) (FOREIGN STANDARD)
DIN EN 26157-1:1991
Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988) (FOREIGN STANDARD)
DIN EN 24766:1992
Slotted set screws with flat point (ISO 4766:1983) (FOREIGN STANDARD)
DIN EN 24015:1991
Hexagon head bolts with reduced shank (shank diameter pitch diameter); product grade B (ISO 4015:1979) (FOREIGN STANDARD)
Clevis pins with head (ISO 2341:1986) (FOREIGN STANDARD)
DIN EN 22341:1992
Clevis pins without head (ISO 2340:1986) (FOREIGN STANDARD)
DIN EN 22340:1992
DIN EN 22339:1992
Unhardened taper pins (ISO 2339:1986) (FOREIGN STANDARD)
DIN EN 20898-7:1995
Mechanical properties of fastenersr- Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992) (FOREIGN STANDARD)
DIN EN 20898-2:1994
Mechanical properties of fasteners; nuts with coarse pitch thread and specified proof load values (ISO 898-2:1992) (FOREIGN STANDARD)
DIN EN 20273:1992
Fasteners; clearance holes for bolts and screws (ISO 273:1979) (FOREIGN STANDARD)
DIN EN 20225:1992
Fasteners; bolts, screws, studs and nuts; symbols and designations of dimensioning (ISO 225:1983) (FOREIGN STANDARD)
DIN EN 1667:1998
Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread (ISO 12126:1997, modified) (FOREIGN STANDARD)
DIN EN 1666:1998
Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread (ISO 12125:1997, modified) (FOREIGN STANDARD)
DIN EN 1665 Berichtigung 1:2007
Hexagon bolts with flange, heavy series; German version EN 1665:1997, Corrigenda to DIN EN 1665:1998-11; German version EN 1665:1997/AC:2007 (FOREIGN STANDARD)
DIN EN 1665:1998
Hexagon bolts with flange - heavy series; English version of DIN EN 1665 (FOREIGN STANDARD)
DIN EN 1664:1998
Prevailing torque type all-metal hexagon nuts with flange (ISO 7044:1997, modified) (FOREIGN STANDARD)
DIN EN 1663:1998
Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified) (FOREIGN STANDARD)
DIN EN 1662 Berichtigung 1:2007
Hexagon bolts with flange, small series (ISO/DIS 15071:1996, modified); German version EN 1662:1997, Corrigenda to DIN EN 1662:1998-02; German version EN 1662:1997/AC:2007 (FOREIGN STANDARD)
DIN EN 1662:1998
Hexagon bolts with flange - Small series (ISO/DIS 15071:1996, modified) (FOREIGN STANDARD)
DIN EN 1661:1998
Hexagon nuts with flange (ISO/DIS 4161:1996, modified) (FOREIGN STANDARD)
Cylindrical helical springs made of round wire - Quality specifications for cold coiled compression springs; German version EN 15800:2008 (Foreign Standard)
DIN EN 15800:2009
DIN EN 1515-2:2002
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated; English version of DIN EN 1515-2 (FOREIGN STANDARD)
DIN EN 1515-1:2000
Flanges and their joints - Bolting - Part 1: Selection of bolting (FOREIGN STANDARD)
DIN EN 1514-2:2005
Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges (FOREIGN STANDARD)
DIN EN 15048-2:2007
Non-preloaded structural bolting assemblies - Part 2: Suitability test; German version EN 15048-2:2007 (FOREIGN STANDARD)
DIN EN 15048-1:2007
Non-preloaded structural bolting assemblies - Part 1: General requirements; German version EN 15048-1:2007 (FOREIGN STANDARD)
DIN EN 14831:2005
Fasteners - Tightening performance - Torque/Angle simplified test method (FOREIGN STANDARD)
DIN EN 14592:2009
Timber structures - Dowel-type fasteners - Requirements; German version EN 14592:2008 (Foreign Standard)
DIN EN 14545:2009
Timber structures - Connectors - Requirements; German version EN 14545:2008 (Foreign Standard)
DIN EN 14399-6:2006
High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers; German version EN 14399-6:2005 + AC:2006 (FOREIGN STANDARD)
DIN EN 14399-5:2006
High-strength structural bolting assemblies for preloading - Part 5: Plain washers; German version EN 14399-5:2005 + AC:2006 (FOREIGN STANDARD)
DIN EN 14399-4:2006
High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies; German version EN 14399-4:2005 (FOREIGN STANDARD)
DIN EN 14399-3:2006
High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies; German version EN 14399-3:2005 (FOREIGN STANDARD)
DIN EN 14399-2:2006
High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading; German version EN 14399-2:2005 (FOREIGN STANDARD)
DIN EN 14399-1:2006
High-strength structural bolting assemblies for preloading - Part 1: General requirements; German version EN 14399-1:2005 (FOREIGN STANDARD)
DIN EN 14219 Berichtigung 1:2007
Hexagon bolts with flange with metric fine pitch thread - Small series (ISO 15072:1999, modified); German version EN 14219:2003, Corrigenda to DIN EN 14219:2003-09; German version EN 14219:2003/AC:2007 (FOREIGN STANDARD)
DIN EN 14219:2003
Hexagon nuts with flange - Small series (ISO 15072:1999, modified) (FOREIGN STANDARD)
DIN EN 14218:2003
Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified) (FOREIGN STANDARD)
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 3: Torsion springs (FOREIGN STANDARD)
DIN EN 13906-3:2002
Cylindrical helical springs made from round wire and bars - Calculation and design - Part 2: Extension springs (FOREIGN STANDARD)
DIN EN 13906-2:2002
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1: Compression springs (FOREIGN STANDARD)
DIN EN 13906-1:2002
DIN EN 13446:2002
Wood-based panels - Determination of withdrawal capacity of fasteners (FOREIGN STANDARD)
DIN EN 13411-7:2009
Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket; German version EN 13411-7:2006+A1:2008 (Foreign Standard)
DIN EN 13411-6:2009
Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket; German version EN 13411-6:2004+A1:2008 (Foreign Standard)
DIN EN 13411-5:2009
Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips; German version EN 13411-5:2003+A1:2008 (Foreign Standard)
DIN EN 13411-3:2009
Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing; German version EN 13411-3:2004+A1:2008 (Foreign Standard)
DIN EN 13411-2:2009
Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings; German version EN 13411-2:2001+A1:2008 (Foreign Standard)
DIN EN 13411-1:2009
Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings; German version EN 13411-1:2002+A1:2008 (Foreign Standard)
DIN EN 13298:2003
Railway applications - Suspension components - Helical suspension springs, steel (FOREIGN STANDARD)
DIN EN 13271:2004
Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints (FOREIGN STANDARD)
DIN EN 12756:2001
Mechanical seals - Principal dimensions, designation and material codes; English version of DIN EN 12756 (FOREIGN STANDARD)
Castors and wheels - Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h) (FOREIGN STANDARD)
DIN EN 12533:1999
Castors and wheels - Castors and wheels for applications up to 1,1 m/s (4 km/h) (FOREIGN STANDARD)
DIN EN 12532:1999
Castors and wheels - Castors and wheels for manually propelled institutional applications (FOREIGN STANDARD)
DIN EN 12530:1999
DIN EN 12512:2005
Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners (FOREIGN STANDARD)
DIN EN 12095:1997
Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength (FOREIGN STANDARD)
DIN EN 12080:2008
Railway applications - Axleboxes - Rolling bearings; German version EN 12080:2007 (FOREIGN STANDARD)
DIN EN 10230-1:2000
Steel wire nails - Part 1: Loose nails for general applications (FOREIGN STANDARD)
DIN EN 10226-3:2005
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges (FOREIGN STANDARD)
DIN EN 10226-2:2005
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation (FOREIGN STANDARD)
DIN EN 10226-1:2004
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation (FOREIGN STANDARD)
DIN 988:1990
Shim rings and supporting rings (FOREIGN STANDARD)
DIN 986:2000
Prevailing torque type hexagon domed cap nuts with non-metallic insert (FOREIGN STANDARD)
DIN 984:1981
Spring retaining rings with lugs for use in bores (internal circlips) (FOREIGN STANDARD)
DIN 983:1981
Retaining rings with lugs for use on shafts (external circlips) (FOREIGN STANDARD)
DIN 981:1993
Locknuts for use with rolling bearings (FOREIGN STANDARD)
DIN 979:2000
Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grades A and B (FOREIGN STANDARD)
DIN 976-1:2002
Metric thread stud bolts (FOREIGN STANDARD)
Diameters of counterbores (holes) for hexagon bolts and nuts (FOREIGN STANDARD)
DIN 974-2:1991
DIN 97:1986
Slotted countersunk (flat) head wood screws (FOREIGN STANDARD)
Axial load fatigue testing of threaded fasteners (FOREIGN STANDARD)
DIN 969:1997
Cross recessed pan head tapping screws with collar (Foreign Standard)
DIN 968:2008
Cross recessed pan head screws with collar - Product grade A (FOREIGN STANDARD)
DIN 967:2002
Designation system for fasteners (FOREIGN STANDARD)
DIN 962:2001
DIN 96:1986
Slotted round head wood screws (FOREIGN STANDARD)
DIN 95:1986
Slotted raised countersunk (oval) head wood screws (FOREIGN STANDARD)
DIN 940:1995
Studs with a length of engagement equal to about 2,5 d (FOREIGN STANDARD)
DIN 939:1995
Studs with a length of engagement equal to about 1,25 d (FOREIGN STANDARD)
DIN 938:1995
Studs with a length of engagement equal to about 1 d (FOREIGN STANDARD)
DIN 935-3:2000
Hexagon slotted nuts with metric coarse pitch thread - Product grade C (FOREIGN STANDARD)
DIN 935-1:2000
Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grades A and B (FOREIGN STANDARD)
DIN 931-2:1987
M 42 to M 160 ? 6 hexagon head bolts; product grade B (FOREIGN STANDARD)
DIN 931 Beiblatt 1:1986
Hexagon head bolts with shank; masses (FOREIGN STANDARD)
DIN 929:2000
Hexagon weld nuts (FOREIGN STANDARD)
DIN 928:2000
Square weld nuts (FOREIGN STANDARD)
DIN 927:2006
Slotted shoulder screws (FOREIGN STANDARD)
DIN 925:2006
Slotted countersunk head screws with full dog point (FOREIGN STANDARD)
DIN 924:2006
Slotted raised countersunk head screws with full dog point (FOREIGN STANDARD)
DIN 923:2006
Slotted pan head screws with shoulder (FOREIGN STANDARD)
DIN 922:2006
Slotted pan head screws with small head and full dog point (FOREIGN STANDARD)
DIN 921:2007
Slotted pan head screws with large head (FOREIGN STANDARD)
DIN 920:2006
Slotted pan head screws with small head (FOREIGN STANDARD)
DIN 918 Beiblatt 3:2005
Overview of European Standards for fasteners (FOREIGN STANDARD)
DIN 917:2000
Hexagon cap nuts (FOREIGN STANDARD)
DIN 910:1992
Hexagon-duty hexagon head screw plugs (FOREIGN STANDARD)
DIN 909:1992
Hexagon head pipe plugs (FOREIGN STANDARD)
DIN 8196-1:1987
Toothing of chain wheels for roller chains as specified in DIN 8187 and DIN 8188; profile dimensions (FOREIGN STANDARD)
Chain wheels for roller chains as specified in DIN 8187; dimensions (FOREIGN STANDARD)
DIN 8192:1987
American type roller chains - Part 1: Simple, duplex and triplex chains (FOREIGN STANDARD)
DIN 8188-1:1996
DIN 8187-1 Berichtigung 1:2006
European type roller chains - Part 1: Simple, duplex and triplex roller chains, Corrigenda to DIN 8187-1:1996-03 (FOREIGN STANDARD)
DIN 8187-1:1996
European type roller chains - Part 1: Simple, duplex and triplex chains (FOREIGN STANDARD)
Cranked-link roller chains (rotary chains) (FOREIGN STANDARD)
DIN 8182:1999
DIN 8181:2000
Double-pitch roller chains (FOREIGN STANDARD)
Bush chains (FOREIGN STANDARD)
DIN 8164:1999
DIN 8154:1999
Solid bearing pin bush chains (FOREIGN STANDARD)
DIN 8152-4:1989
Leaf chains; clevises and sheaves for heavy series LH chains; connecting dimensions (FOREIGN STANDARD)
DIN 8152-3:1989
Leaf chains; heavy series LH (FOREIGN STANDARD)
DIN 8141-2:1993
ISO metric coarse and fine pitch screw threads for interference fits in aluminium cast alloys with diameters from 5 mm to 16 mm - Gauges for internal and external threads (FOREIGN STANDARD)
DIN 8141-1:1993
ISO metric coarse and fine pitch screw threads for interference fits in aluminium cast alloys with diameters from 5 mm to 16 mm - Nominal sizes, tolerances and limits of size (FOREIGN STANDARD)
DIN 8140-3:1993
Wire for ISO metric screw threads - Gauges and gauge sizes (FOREIGN STANDARD)
DIN 8140-2:2005
Wire thread inserts for ISO metric screw threads - Part 2: Helical coil threads for inserts, thread tolerances (Foreign Standard)
DIN 8140-1:1999
Wire thread inserts for ISO metric - Dimensions and technical delivery conditions (FOREIGN STANDARD)
DIN 80705:1990
Thin nuts with coarse pitch and fine pitch thread and with small widths across flats (FOREIGN STANDARD)
Bow Nuts; Metric Screw Thread (FOREIGN STANDARD)
DIN 80704:1968
DIN 7998:1975
Threads and Thread Ends for Wood Screws (FOREIGN STANDARD)
Cross recessed countersunk head wood screws (FOREIGN STANDARD)
DIN 7997:1984
Cross recessed pan head wood screws (FOREIGN STANDARD)
DIN 7996:1986
Cross recessed raised countersunk head wood screws (FOREIGN STANDARD)
DIN 7995:1984
DIN 7993:1970
Round Wire Snap Rings and Snap Ring Grooves for Shafts and Bores (FOREIGN STANDARD)
DIN 7992:1970
T-head Bolts with Large Head (FOREIGN STANDARD)
DIN 7990:2008
Hexagon head bolts with hexagon nut for steel structures (FOREIGN STANDARD)
DIN 7989-2:2001
Washers for use structural steelwork - Part 2: Product grade A (FOREIGN STANDARD)
DIN 7989-1:2001
Washers for use in structural steelwork - Part 1: Product grade C (FOREIGN STANDARD)
DIN 7984:2002
Hexagon socket thin head cap screws (FOREIGN STANDARD)
DIN 7975:1989
Tapping screw connections; guideline values for core hole diameters and use (FOREIGN STANDARD)
DIN 797:1970
Special Foundation Bolts (FOREIGN STANDARD)
DIN 7969:2007
Slotted countersunk head bolts with hexagon nut for steel structures (FOREIGN STANDARD)
DIN 7968:2007
Hexagon fit bolts with hexagon nut for steel structures (FOREIGN STANDARD)
DIN 7965:1965
Screwed Inserts (Screw Plugs) (FOREIGN STANDARD)
DIN 7952-2:1971
Sheet Metal Rim Holes with Screw Thread; Prepunch Hole Diameters (FOREIGN STANDARD)
DIN 787:2005
DIN 780-2:1977
Series of modules for gears; Modules for cylindrical worm gear transmissions (FOREIGN STANDARD)
DIN 780-1:1977
Series of Modules for Gears; Modules for Spur Gears (FOREIGN STANDARD)
Bolt end protrusions (FOREIGN STANDARD)
DIN 78:2001
DIN 7753-3:1986
Endless narrow V-belts for the automotive industry; dimensions of belts and pulley groove profiles (FOREIGN STANDARD)
DIN 7753-1:1988
Endless narrow V-belts for mechanical engineering purposes; dimensions (FOREIGN STANDARD)
DIN 76-3:1977
Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch (FOREIGN STANDARD)
DIN 76-2:1984
Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1 (FOREIGN STANDARD)
DIN 7604:1992
Light-duty hexagon head screw plugs (FOREIGN STANDARD)
DIN 75532-1:1976
Transmission of rotary motions; Types of connection to gears, intermediate gears, flexible drive shafts and equipment (FOREIGN STANDARD)
Cross recessed head thread cutting screws - Dimensions, requirements and testing (FOREIGN STANDARD)
DIN 7516:1995
DIN 7513:1995
Hexagon head and slotted head thread cutting screws - Dimensions, requirements and testing (FOREIGN STANDARD)
DIN 7500-2:1984
Thread rolling screws for ISO metric thread; guideline values for hole diameters (FOREIGN STANDARD)
Case hardened and tempered thread rolling screws for metric ISO thread - Part 1: Types, designation, requirements (FOREIGN STANDARD)
DIN 7500-1:2007
Cylindrical Shaft Ends; Dimensions, Nominal Transmissible Torques (FOREIGN STANDARD)
DIN 748-1:1970
DIN 740-2:1986
Power transmission engineering; flexible shaft couplings; parameters and design principles (FOREIGN STANDARD)
DIN 740-1:1986
Power transmission engineering; flexible shaft couplings; technical delivery conditions (FOREIGN STANDARD)
Countersinks for countersunk head screws (except screws with DIN EN 27721 head) (FOREIGN STANDARD)
DIN 74:2003
DIN 7349:1974
Plain Washers for Bolts with Heavy Clamping Sleeves (FOREIGN STANDARD)
DIN 7341:1977
Rivet Pins (FOREIGN STANDARD)
DIN 7340:1993
Tubular rivets cut from the tube (FOREIGN STANDARD)
DIN 7339:1993
Tubular rivets (one piece) drawn from strip (FOREIGN STANDARD)
DIN 7338:1993
Rivets for brake linings and clutch linings (FOREIGN STANDARD)
Compression rivets (FOREIGN STANDARD)
DIN 7331:1993
DIN 728:1991
Single direction self-aligning thrust bearings with asymmetric rollers (FOREIGN STANDARD)
DIN 7273-1:1970
Knuckle Threads for Steel Sheet Pieces up to 0.5 mm Thickness and Appropriated Couplings; Dimensions, Tolerances (FOREIGN STANDARD)
DIN 715:1987
Rolling bearings; double direction thrust ball bearings (FOREIGN STANDARD)
DIN 711:1988
Rolling bearings; single direction thrust ball bearings (FOREIGN STANDARD)
DIN 6928:2008
Hexagon head tapping screws with collar (Foreign Standard)
DIN 6918:1990
Square taper washers for high-strength structual bolting of steel channel sections (FOREIGN STANDARD)
DIN 6917:1989
Square taper washers for high-strength structural bolting of steel I sections (FOREIGN STANDARD)
DIN 6912:2002
Hexagon socket thin head cap screws with pilot recess (FOREIGN STANDARD)
Conical spring washers for screw and washer assemblies (FOREIGN STANDARD)
DIN 6908:1995
DIN 6889:1956
Taper Key Torque Transmission; Gib-head Saddle Keys, Dimensions and Application (FOREIGN STANDARD)
DIN 6888:1956
Drive Type Fastenings without Taper Action; Woodruff Keys, Dimensions and Application (FOREIGN STANDARD)
DIN 6887:1968
Stressed-type Fastenings with Taper Action; Taper Keys with Gip Head, Keyways, Dimensions and Application (FOREIGN STANDARD)
DIN 6886:1967
Stressed-type Fastenings with Taper Action; Taper Keys, Keyways, Dimensions and Application (FOREIGN STANDARD)
DIN 6885-3:1956
Drive Type Fastenings without Taper Action; Parallel Keys, Shallow Pattern, Dimensions and Application (FOREIGN STANDARD)
DIN 6885-1:1968
Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern (FOREIGN STANDARD)
DIN 6884:1956
Taper Key Torque Transmission; Gib-head Parallel Keys, Dimensions and Application (FOREIGN STANDARD)
DIN 6883:1956
Taper Key Torque Transmission; Parallel Keys, Dimensions and Application (FOREIGN STANDARD)
DIN 6881:1956
Taper Key Torque Transmission; Saddle Keys, Dimensions and Application (FOREIGN STANDARD)
DIN 68163:1982
Nails for assembling timber pallets (FOREIGN STANDARD)
DIN 6799:1981
Lock washers (retaining washers) for shafts (FOREIGN STANDARD)
Conical spring washers for bolt/nut assemblies (FOREIGN STANDARD)
DIN 6796:1987
DIN 6792:1993
Semi-tubular countersunk head rivets; nominal diameters 1,6 to 10 mm (FOREIGN STANDARD)
DIN 6791:1993
Semi-tubular pan head rivets; nominal diameters 1,6 to 10 mm (FOREIGN STANDARD)
DIN 675:1993
Flat countersunk head rivets; nominal diameters 3 to 5 mm (FOREIGN STANDARD)
DIN 674:1993
Flat round head rivets; nominal diameters 1,4 to 6 mm (FOREIGN STANDARD)
DIN 662:1993
Mushroom head rivets; nominal diameters 1,6 to 6 mm (FOREIGN STANDARD)
Countersunk head rivets; nominal diameters 1 to 8 mm (FOREIGN STANDARD)
DIN 661:1993
DIN 660:1993
Round head rivets; nominal diameters 1 to 8 mm (FOREIGN STANDARD)
DIN 653:2006
Knurled thumb screws, low type (FOREIGN STANDARD)
DIN 6434:1984
Rivet sets (FOREIGN STANDARD)
DIN 6379:2003
Studs for use with T-nuts (FOREIGN STANDARD)
DIN 635-1:1987
Rolling bearings; single-row self-aligning roller bearings (FOREIGN STANDARD)
DIN 6340:1987
Washers for clamping devices (FOREIGN STANDARD)
Ball handles (FOREIGN STANDARD)
DIN 6337:1996
DIN 6319 Berichtigung 1:2007
Spherical washers, conical seats, Corrigenda to DIN 6319:2001-10 (Foreign Standard)
DIN 6319:2001
Spherical washers and conical seats (FOREIGN STANDARD)
DIN 6307:2002
Tommy nuts with movable bar (FOREIGN STANDARD)
DIN 6306:2002
Tommy screws with movable bar (FOREIGN STANDARD)
DIN 6305:2002
Tommy nuts with fixed bar (FOREIGN STANDARD)
DIN 6304:2002
Tommy screws with fixed bar (FOREIGN STANDARD)
DIN 6303:2006
Knurled nuts (FOREIGN STANDARD)
DIN 630:1993
Double row self-aligning ball bearings with cylindrical and tapered bore (FOREIGN STANDARD)
DIN 628-6:1999
Single-row, angular contact radial ball bearings with contact angles of 15? and 25? (FOREIGN STANDARD)
DIN 628-5:1994
Double row angular contact radial ball bearings with spacer balls (FOREIGN STANDARD)
DIN 626-2:1999
Rolling bearings with spherical outside surface and extended inner ring - Part 2: Housing for insert bearings (FOREIGN STANDARD)
DIN 626-1:1999
Rolling bearings with spherical outside surface and extended inner ring - Part 1: Insert bearings (FOREIGN STANDARD)
DIN 625-4:1987
Rolling bearings; radial contact groove ball bearings with flanged outer ring (FOREIGN STANDARD)
DIN 625-3:1990
Rolling bearings; double row radial contact ball bearings (FOREIGN STANDARD)
DIN 625-1:1989
Rolling bearings; single row radial contact ball bearings (FOREIGN STANDARD)
Designation system for rolling bearings (FOREIGN STANDARD)
DIN 623-1:1993
DIN 620-6:2004
Rolling bearings - Rolling bearing tolerances - Part 6: Chamfer dimension limits (FOREIGN STANDARD)
DIN 620-2:1988
Rolling bearings; tolerances for rolling bearings; tolerances for radial bearings (FOREIGN STANDARD)
DIN 620-1:1982
Rolling bearings; Gauging methods for dimensional and running tolerances (FOREIGN STANDARD)
DIN 616:2000
Rolling bearings - General plan for boundary dimensions (FOREIGN STANDARD)
DIN 611:1990
Overview of standards for rolling bearings (FOREIGN STANDARD)
DIN 609:1995
Hexagon fit bolts (FOREIGN STANDARD)
DIN 608:1981
Flat countersunk square neck bolts, with short square (FOREIGN STANDARD)
Cup head nib bolts (FOREIGN STANDARD)
DIN 607:1981
DIN 6063-2:2004
Screw threads used mainly for plastic containers - Part 2: Dimensions of trapezoidal threads (FOREIGN STANDARD)
DIN 605:1981
Flat countersunk square neck bolts, with long square (FOREIGN STANDARD)
DIN 604:1981
Flat countersunk nib bolts (FOREIGN STANDARD)
DIN 603:1981
Mushroom head square neck bolts (FOREIGN STANDARD)
DIN 5903-2:1997
Fish bolts - Part 2: With square head (FOREIGN STANDARD)
DIN 5903-1:1997
Fish bolts - Part 1: With round head and oval neck (FOREIGN STANDARD)
DIN 58405-4:1972
Spur Gear Drives for Fine Mechanics; Tables (FOREIGN STANDARD)
DIN 58405-3:1972
Spur Gear Drives for Fine Mechanics; Indication in Drawings, Examples for Calculation (FOREIGN STANDARD)
DIN 58405-2:1972
Spur Gear Drives for Fine Mechanics; Gear Fit Selection, Tolerances, Allowances (FOREIGN STANDARD)
DIN 58405-1:1972
Spur Gear Drives for Fine Mechanics; Scope, Definitions, Principal Design Data, Classification (FOREIGN STANDARD)
DIN 582:2003
Eyenuts for lifting purposes (FOREIGN STANDARD)
Collar eyebolts for lifting purposes (FOREIGN STANDARD)
DIN 580:2003
DIN 571:1986
Hexagon head wood screws (FOREIGN STANDARD)
DIN 564:1995
Hexagon set screws with small hexagon, half dog point and flat cone point (FOREIGN STANDARD)
DIN 562:2000
Square thin nuts - Product grade B (FOREIGN STANDARD)
DIN 561:1995
Hexagon set screws with small hexagon and full dog point (FOREIGN STANDARD)
DIN 557:1994
Product grade C square nuts (FOREIGN STANDARD)
DIN 5481 Berichtigung 1:2009
Serration shafts, Corrigendum to DIN 5481:2005-06 (Foreign Standard)
DIN 5481:2005
Serration shafts (FOREIGN STANDARD)
DIN 5480-2:2006
Involute splines based on reference diameters - Part 2: Nominal and inspection dimensions (FOREIGN STANDARD)
DIN 5480-16 Berichtigung 1:2009
Involute splines based on reference diameters - Part 16: Tools, Corrigendum to DIN 5480-16:2006-03 (Foreign Standard)
DIN 5480-16:2006
Involute splines based on reference diameters - Part 16: Tools (FOREIGN STANDARD)
DIN 5480-15 Berichtigung 1:2009
Involute splines based on reference diameters - Part 15: Inspection, Corrigendum to DIN 5480-15:2006-03 (Foreign Standard)
DIN 5480-15:2006
Involute splines based on reference diameters - Part 15: Inspection (FOREIGN STANDARD)
DIN 5480-1:2006
Involute splines based on reference diameters - Part 1: Generalities (FOREIGN STANDARD)
DIN 5472:1980
Machine Tools; Spline Shafts and Spline Bore Profiles with 6 Splines; Internal Centering, Dimensions (FOREIGN STANDARD)
DIN 5471:1974
Machine Tools; Spline Shafts and Spline Bore Profiles with 4 Splines, Internal Centering, Dimensions (FOREIGN STANDARD)
DIN 547:2006
Round nuts with drilled holes in one face (FOREIGN STANDARD)
DIN 5464:1965
Straight-sided Splines; Heavy Series (FOREIGN STANDARD)
DIN 546:1986
Slotted round nuts (FOREIGN STANDARD)
DIN 5425-1:1984
Rolling bearings; mounting tolerances; general guidelines (FOREIGN STANDARD)
DIN 5419:1959
Felt Rings, Felt Strips, Ring Grooves for Rolling Bearing Housings (FOREIGN STANDARD)
DIN 5418:1993
Mounting dimensions of rolling bearings (FOREIGN STANDARD)
DIN 5417:1976
Securing Parts for Rolling Bearings; Snap Rings for Bearings with Ring Groove (FOREIGN STANDARD)
DIN 5402-3:1993
Rollers for needle roller bearings (FOREIGN STANDARD)
Balls for rolling bearings and general industrial use (FOREIGN STANDARD)
DIN 5401:2002
DIN 5296:1966
Rings (FOREIGN STANDARD)
DIN 529:1986
Masonry and foundation bolts (FOREIGN STANDARD)
DIN 525:1986
Weld studs (FOREIGN STANDARD)
DIN 513-3:1985
Metric buttress threads; deviations and tolerances (FOREIGN STANDARD)
DIN 513-2:1985
Metric buttress threads; general plan (FOREIGN STANDARD)
DIN 513-1:1985
Metric buttress threads; thread profiles (FOREIGN STANDARD)
DIN 508:2002
Nuts for T-slots (FOREIGN STANDARD)
DIN 50282:1979
Plain Bearings; The Tribological Behaviour of Metallic Antifriction Materials; Significant Definitions (FOREIGN STANDARD)
DIN 50280:1975
Running Test on Radial Plain Bearings; General (FOREIGN STANDARD)
DIN 48063-1:1978
Split Pins; Dimensions (FOREIGN STANDARD)
DIN 480:1985
Square head bolts with collar and oval half dog point (FOREIGN STANDARD)
DIN 479:1985
Square head bolts with short dog point (FOREIGN STANDARD)
DIN 478:1985
Square head bolts with collar (FOREIGN STANDARD)
DIN 475-1:1984
Widths across flats for bolts, screws, valves and fittings (FOREIGN STANDARD)
Circlips (retaining rings) for bores; Normal type and heavy type (FOREIGN STANDARD)
DIN 472:1981
Circlips (retaining rings) for shafts; Normal type and heavy type (FOREIGN STANDARD)
DIN 471:1981
DIN 470:1974
Sealing Washers (FOREIGN STANDARD)
DIN 467:2006
Knurled nuts, low type (FOREIGN STANDARD)
DIN 466:2006
Knurled nuts, high type (FOREIGN STANDARD)
DIN 464:2007
Knurled thumb screws, high type (FOREIGN STANDARD)
DIN 462:1973
Machine Tools; Internal Tab Washers for Slotted Round Nuts for Hook Spanner according to DIN 1804 (FOREIGN STANDARD)
DIN 444:1983
Eyebolts (FOREIGN STANDARD)
DIN 443:1970
Sealing Push-in Caps (FOREIGN STANDARD)
DIN 442:1970
Sealing Expanding Caps (FOREIGN STANDARD)
DIN 440:2001
Washers with square hole for use in timber constructions (FOREIGN STANDARD)
DIN 436:1990
Square washers for use in timber constructions (FOREIGN STANDARD)
DIN 435:2000
Square taper steel washers for use with I sections (FOREIGN STANDARD)
DIN 434:2000
Square taper steel washers for use with channel sections (FOREIGN STANDARD)
DIN 431:2000
Pipe nuts with thread as in ISO 228-1 (FOREIGN STANDARD)
DIN 405-3:1997
General purpose knuckle threads - Gauges for external and internal threads - Types, profiles and tolerances (FOREIGN STANDARD)
DIN 405-2:1997
General purpose knuckle threadsd- Tolerances (FOREIGN STANDARD)
DIN 405-1:1997
General-purpose knuckle threads - Profiles and nominal sizes (FOREIGN STANDARD)
DIN 40430:1971
Steel Conduit Thread; Dimensions (FOREIGN STANDARD)
DIN 404:2006
Slotted capstan screws (FOREIGN STANDARD)
DIN 4024-2:1991
Machine foundations; rigid foundations for machinery with periodic excitation (FOREIGN STANDARD)
DIN 4024-1:1988
Machine foundations; flexible structures that support machines with rotating elements (FOREIGN STANDARD)
DIN 4000-23:1988
Tabular layouts of article characteristics for iron and steel (FOREIGN STANDARD)
DIN 4000-1 Beiblatt 1:1975
Tabular Lay-outs of Article Characteristics; Principles; Application in Article Characteristics Lists (FOREIGN STANDARD)
DIN 3993-4:1981
Geometrical design of cylindrical internal involute gear pairs; Diagrams for limits of internal gear - pinion type cutter matings (FOREIGN STANDARD)
DIN 3993-3:1981
Geometrical design of cylindrical internal involute gear pairs; Diagrams for the determination of addendum modification coefficients (FOREIGN STANDARD)
DIN 3993-2:1981
Geometrical design of cylindrical internal involute gear pairs; Diagrams for geometrical limits of internal gear-pinion matings (FOREIGN STANDARD)
DIN 3993-1:1981
Geometrical design of cylindrical internal involute gear pairs; Basic rules (FOREIGN STANDARD)
DIN 3979:1979
Tooth Damage on Gear Trains; Designation, Characteristics, Causes (FOREIGN STANDARD)
DIN 3977:1981
Measuring element diameters for the radial or diametral dimension for testing tooth thickness of cylindrical gears (FOREIGN STANDARD)
DIN 3972:1952
Reference Profiles of Gear-cutting Tools for Involute Tooth Systems according to DIN 867 (FOREIGN STANDARD)
DIN 3970-2:1974
Master Gears for Checking Spur Gears; Receiving Arbors (FOREIGN STANDARD)
DIN 3970-1:1974
Master Gears for Checking Spur Gears; Gear Blank and Tooth System (FOREIGN STANDARD)
DIN 3967:1978
System of Gear Fits; Backlash, Tooth Thickness Allowances, Tooth Thickness Tolerances; Principles (FOREIGN STANDARD)
DIN 3965-4:1986
Tolerancing of bevel gears; tolerances for shaft angle errors and axes intersection point deviations (FOREIGN STANDARD)
DIN 3965-3:1986
Tolerancing of bevel gears; tolerances for tangential composite errors (FOREIGN STANDARD)
DIN 3965-2:1986
Tolerancing of bevel gears; tolerances for individual parameters (FOREIGN STANDARD)
DIN 3965-1:1986
Tolerancing of bevel gears; basic concepts (FOREIGN STANDARD)
Deviations of Shaft Centre Distances and Shaft Position Tolerances of Casings for Cylindrical Gears (FOREIGN STANDARD)
DIN 3964:1980
DIN 3963:1978
Tolerances for Cylindrical Gear Teeth; Tolerances for Working Deviations (FOREIGN STANDARD)
DIN 3962-3:1978
Tolerances for Cylindrical Gear Teeth; Tolerances for Pitch-span Deviations (FOREIGN STANDARD)
DIN 3962-2:1978
Tolerances for Cylindrical Gear Teeth; Tolerances for Tooth Trace Deviations (FOREIGN STANDARD)
DIN 3962-1:1978
Tolerances for Cylindrical Gear Teeth; Tolerances for Diviations of Individual Parameters (FOREIGN STANDARD)
DIN 3961:1978
Tolerances for Cylindrical Gear Teeth; Bases (FOREIGN STANDARD)
DIN 3858:2005
Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions (Foreign Standard)
DIN 380-2:1985
Stub metric trapezoidal screw threads; general plan (FOREIGN STANDARD)
DIN 380-1:1985
Stub metric trapezoidal screw threads; thread profiles (FOREIGN STANDARD)
DIN 38:1983
Plain bearings; bearing metal lining for thick-walled multilayer plain bearings (FOREIGN STANDARD)
DIN 3780:1954
Seals and Packings; Stuffing Box Diameters and Related Packing Widths, Design Sheet (FOREIGN STANDARD)
DIN 3771-5:1993
O-rings for use in fluid power systems - Design details and dimensions of housings (FOREIGN STANDARD)
DIN 3771-3:1984
O-rings for use in fluid power systemsl - Materials and fields of application (FOREIGN STANDARD)
DIN 3771-1:1984
O-rings for use in fluid systemsh - Dimensions to ISO 3601-1 (FOREIGN STANDARD)
DIN 3760:1996
Rotary shaft lip seals (FOREIGN STANDARD)
DIN 3570:1968
Steel Strap for Tubes of NW 20 to 500 (FOREIGN STANDARD)
DIN 3567:1963
Pipe Brackets for NW 20 to 500 (FOREIGN STANDARD)
DIN 34828:2005
Welding studs for turnbuckles (FOREIGN STANDARD)
DIN 34827:2005
Hexalobular socket set screws (FOREIGN STANDARD)
DIN 34823:2005
Raised countersunk head screws with 12 point socket (FOREIGN STANDARD)
Cheese head screws with flange with 12 point socket (FOREIGN STANDARD)
DIN 34822:2005
Cheese head screws with 12 point socket (FOREIGN STANDARD)
DIN 34821:2005
DIN 34820:2004
Plain washers, chamfered, for steel structures (FOREIGN STANDARD)
DIN 34819:2008
Hexalobular socket raised head tapping screws with collar (Foreign Standard)
DIN 34818:2002
Sheet spring nuts with tappping screw thread (FOREIGN STANDARD)
DIN 34817:2001
Weld screws with metric thread (FOREIGN STANDARD)
DIN 34816:1999
Plastic washers - Large series (FOREIGN STANDARD)
DIN 34815:1999
Plastic washers - Standard series (FOREIGN STANDARD)
DIN 34814:1999
Plastic hexagon nuts (FOREIGN STANDARD)
Cross-recessed cheese head plastic screws (FOREIGN STANDARD)
DIN 34813:1999
Cross-recessed pan head plastic screws (FOREIGN STANDARD)
DIN 34812:1999
Cross-recessed flat head plastic screws (FOREIGN STANDARD)
DIN 34811:1999
DIN 34810:1999
Plastic hexagon head screws (FOREIGN STANDARD)
DIN 34803:2001
Split pin holes and wire holes in bolts, screws and studs (FOREIGN STANDARD)
DIN 34802:2001
Steel hexalobular socket heat cap screws with large driving feature (FOREIGN STANDARD)
DIN 34801:1999
Steel hexalobular head bolts with large flange (FOREIGN STANDARD)
Bolts and screws with external hexalobular driving feature with small flange (FOREIGN STANDARD)
DIN 34800:2005
Ball knobs (FOREIGN STANDARD)
DIN 319:2002
DIN 318:1999
Wing screws with edged wings (FOREIGN STANDARD)
DIN 31699:1986
Plain bearings; shafts, collars, thrust collars; geometrical tolerances and surface roughness (FOREIGN STANDARD)
DIN 31698:1979
Plain Bearings, Fits (FOREIGN STANDARD)
DIN 31697:1978
Plain Thrust Bearings; Ring Thrust Bearings; Fitting Dimensions (FOREIGN STANDARD)
DIN 31696:1978
Plain Thrust Bearings; Pivoted Pad Thrust Bearings; Fitting Dimensions (FOREIGN STANDARD)
DIN 31694:1990
Pedestal plain bearings; centre flange bearings (FOREIGN STANDARD)
DIN 31693:1990
Pedestal plain bearings; side flange bearing (FOREIGN STANDARD)
DIN 31692-3:1996
Vibration monitoring of plain bearings (FOREIGN STANDARD)
DIN 31692-2:1996
Temperature monitoring of plain bearings (FOREIGN STANDARD)
DIN 31692-1:1996
Lubrication and lubrication monitoring of plain bearings (FOREIGN STANDARD)
DIN 31690:1990
Pedestal plain bearings; block plummer (FOREIGN STANDARD)
DIN 31670-8:1986
Plain bearings; quality assurance of plain bearings; checking the geometrical tolerances and surface roughness of shafts, collars, and thrust collars (FOREIGN STANDARD)
DIN 31652-3:1983
Plain bearings; hydrodynamic plain journal bearings designed for operation under steady-state conditions; operational parameters necessary when designing circular cylindrical bearings (FOREIGN STANDARD)
DIN 31652-2:1983
Plain bearings; hydrodynamic plain journal bearings designed for operation under steady-state conditions; functions necessary when designing circular cylindrical bearings (FOREIGN STANDARD)
DIN 31652-1:1983
Plain bearings; hydrodynamic plain journal bearings designed for operation under steady-state conditions; design of circular cylindrical bearings (FOREIGN STANDARD)
DIN 316:1998
Wing screws with rounded wings (FOREIGN STANDARD)
DIN 315:1998
Wing nuts with rounded wings (FOREIGN STANDARD)
DIN 314:1999
Wing nuts with edged wings (FOREIGN STANDARD)
DIN 30295-2:1973
Rounded Trapezoidal Threads; Limiting Screw Thread Dimensions and Allowances; Permissible Deviations and Permissible Wear of Thread Gauges (FOREIGN STANDARD)
DIN 30295-1:1973
Rounded Trapezoidal Threads; Nominal Dimensions (FOREIGN STANDARD)
Countersunk head rivets; nominal diameters 10 to 36 mm (FOREIGN STANDARD)
DIN 302:1993
DIN 28091-4:1995
Sheet gasket materials - Part 4: Technical delivery conditions for exfoliated graphite-based sheet gasket materials (FOREIGN STANDARD)
DIN 28091-3:1995
Sheet gasket materials - Part 3: Technical delivery conditions for PTFE sheet gasket materials (FOREIGN STANDARD)
DIN 28091-2:1995
Sheet gasket materials - Part 2: Technical delivery conditions for compressed fibre gasket materials (FOREIGN STANDARD)
DIN 28091-1:1995
Technical delivery conditions for gasket sheets - Part 1: Gasket materials; general requirements (FOREIGN STANDARD)
DIN 271:1974
Tangential Keys and Tangential Keyways for Constant Loads (FOREIGN STANDARD)
DIN 268:1974
Tangential Keys and Tangential Keyways for Alternating Shock Loads (FOREIGN STANDARD)
DIN 267-6:1975
Fasteners - Product grade F (FOREIGN STANDARD)
DIN 267-29:1993
Fasteners; product grades for parts for bolted connections for use at temperatures ranging from -200 ?C to +700 ?C (FOREIGN STANDARD)
DIN 267-28:2004
DIN 267-27:2004
Technical Delivery conditions for fasteners - Part 27: Adhesive-coated steel screws, bolts and studs (FOREIGN STANDARD)
DIN 267-26:2005
Fasteners - Technical specifications - Part 26: Conical spring washers for bolted connections (FOREIGN STANDARD)
DIN 267-2:1984
Fasteners; technical delivery conditions; design and dimensional accuracy (FOREIGN STANDARD)
DIN 264-2:1973
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances Permissible Deviations and Permissible Wear of Screw Thread Gauges (FOREIGN STANDARD)
DIN 264-1:1973
Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Nominal Dimensions (FOREIGN STANDARD)
DIN 262-2:1973
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges (FOREIGN STANDARD)
DIN 262-1:1973
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Nominal Dimensions (FOREIGN STANDARD)
DIN 261:1987
T-head bolts (FOREIGN STANDARD)
DIN 258:1977
Taper Pins with Thread Ends and Constant Taper Lengths (FOREIGN STANDARD)
DIN 25424-1:1981
Fault tree analysis; Method and graphical symbols (FOREIGN STANDARD)
Bolts, screws, studs and nuts used in rail vehicle construction - Summary (FOREIGN STANDARD)
DIN 25200:1997
Bolted Connections with Reduced Shank; Threaded Holes for Studs (FOREIGN STANDARD)
DIN 2510-8:1971
Bolted Connections with Reduced Shank; Extension Sleeves (FOREIGN STANDARD)
DIN 2510-7:1971
Bolted Connections with Reduced Shank; Cap Nuts (FOREIGN STANDARD)
DIN 2510-6:1974
Bolted Connections with Reduced Shank; Hexagon Nuts (FOREIGN STANDARD)
DIN 2510-5:1971
Bolted Connections with Reduced Shank; Studs (FOREIGN STANDARD)
DIN 2510-4:1971
Bolted Connections with Reduced Shank; Stud-bolts (FOREIGN STANDARD)
DIN 2510-3:1971
Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits (FOREIGN STANDARD)
DIN 2510-2:1971
Bolted Connections with Reduced Shank; Survey, Range of Application and Examples of Installation (FOREIGN STANDARD)
DIN 2510-1:1974
DIN 2509:1986
Double end studs (FOREIGN STANDARD)
Centralized lubrication systems; Technical quantities and units (FOREIGN STANDARD)
DIN 24271-3:1982
DIN 22425:1990
Triangular nuts for use with electrical equipment in mining (FOREIGN STANDARD)
DIN 2218:1976
Endless V-belts for Mechanical Engineering; Calculation of Drives, Power Ratings (FOREIGN STANDARD)
DIN 2217-2:1973
Driving Elements; Grooved Pulleys for V-belts; Testing of Grooves (FOREIGN STANDARD)
DIN 2217-1:1973
Driving Elements; V-belt Pulleys; Dimensions, Material (FOREIGN STANDARD)
DIN 2216:1972
Open Ended V-belts; Dimensions (FOREIGN STANDARD)
Classical endless V-belts - Dimensions (FOREIGN STANDARD)
DIN 2215:1998
DIN 2211-3:1986
Power transmission elements; grooved pulleys for narrow V-belts; assignment of pulleys to electric motors (FOREIGN STANDARD)
DIN 2211-2:1984
Power transmission elements; grooved pulleys for narrow V-belts; inspection of grooves (FOREIGN STANDARD)
DIN 2211-1:1984
Power transmission elements; grooved pulleys for narrow V-belts; dimensions, materials (FOREIGN STANDARD)
Cold coiled cylindrical helical torsion springs - Requirements and testing (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 2194:2002
DIN 2192:2002
Flat springs - Requirements and testing (FOREIGN STANDARD) (FOREIGN STANDARD)
DIN 2098-2:1970
Helical Springs Made of Round Wire; Dimensions for Cold-coiled compression springs of less than 0.5 mm Wire Diameter (FOREIGN STANDARD)
DIN 2098-1:1968
Helical springs Made of Round Wire; Dimensions for Cold Coiled Compression Springs with Wire Diameter from 0.5 mm upwards (FOREIGN STANDARD)
DIN 2097:1973
Helical Springs Made of Round Wire; Quality Specifications for Cold Coiled Tension Springs (FOREIGN STANDARD)
DIN 2096-1:1981
Helical compression springs made of round wire and rod; Quality requirements for hot formed compression springs (FOREIGN STANDARD)
DIN 2093:2006
Disc springs - Quality specifications - Dimensions (FOREIGN STANDARD)
DIN 2092:2006
Disc springs - Calculation (FOREIGN STANDARD)
Circular section torsion bar springs; Calculation and design (FOREIGN STANDARD)
DIN 2091:1981
DIN 2090:1971
Helical Compression Springs made of Flat Bar Steel; Calculation (FOREIGN STANDARD)
DIN 2082-1:1979
Nuts for Milling Machine Arbors (FOREIGN STANDARD)
DIN 202:1999
Screw threads - General plan (FOREIGN STANDARD)
DIN 189:1977
Driving Elements; Sole Plates; Main Dimensions (FOREIGN STANDARD)
DIN 188:1987
T-head bolts with double nib (FOREIGN STANDARD)
DIN 186:1988
T-head bolts with square neck (FOREIGN STANDARD)
DIN 1850-6:1998
Plain bearings - Thermoplastic bushes (FOREIGN STANDARD)
DIN 1850-5:1998
Plain bearings -Thermoset bushes (FOREIGN STANDARD)
DIN 1850-4:1998
Plain bearings - Artificial carbon bushes (FOREIGN STANDARD)
DIN 1850-3:1998
Plain bearings - Sintered bushes (FOREIGN STANDARD)
DIN 1816:1971
Round Nut with Set Pin Holes Inside; ISO Metric Fine Thread (FOREIGN STANDARD)
DIN 1804:1971
Slotted Round Nut for Hook Spanner; ISO Metric Fine Thread (FOREIGN STANDARD)
Closed Insert Nuts with Dead Hole for Plastics Mouldings (FOREIGN STANDARD)
DIN 16903-3:1974
Closed Insert Nuts with Disc for Plastics Mouldings (FOREIGN STANDARD)
DIN 16903-2:1974
DIN 16903-1:1974
Open Insert Nuts for Plastics Mouldings (FOREIGN STANDARD)
DIN 168-1:1998
Glass container knuckle thread finishes - Thread sizes (FOREIGN STANDARD)
DIN 1587:2000
Hexagon domed cap nuts (FOREIGN STANDARD)
DIN 158-1:1997
Metric taper external and mating parallel internal screw threads - Dimensions, tolerances and inspection (FOREIGN STANDARD)
DIN 15403:1969
Lifting Hooks for Hoists; Knuckle Threads (FOREIGN STANDARD)
DIN 15020-2:1974
Lifting Appliances; Principles Relating to Rope Drives; Supervision during Operation (FOREIGN STANDARD)
DIN 15020-1:1974
Lifting Appliances; Principles Relating to Rope Drives; Calculation and Construction (FOREIGN STANDARD)
DIN 1495-3:1996
Sintered metal plain bearings subject to specific requirements for use in small-power and fractional horse-power electric motors - Part 3: Requirements and testing (FOREIGN STANDARD)
DIN 1495-2:1983
Sintered metal plain bearings which meet specific requirements for fractional and subfractional horsepower electric motors; Cylindrical bearings; Dimensions (FOREIGN STANDARD)
DIN 1495-1:1983
Sintered metal plain bearings which meet specific requirements for fractional and subfractional horsepower electric motors; Spherical bearings; Dimensions (FOREIGN STANDARD)
DIN 1480:2005
Forged turnbuckles, (open type) (FOREIGN STANDARD)
DIN 1479:2005
Hexagon turnbuckles (FOREIGN STANDARD)
DIN 1478:2005
Turnbuckles made from steel tubes or round steel bars (FOREIGN STANDARD)
DIN 1469:1978
Grooved Pins, Half Length Grooved with Gorge (FOREIGN STANDARD)
Conical shaft ends with internal threade - Dimensions (FOREIGN STANDARD)
DIN 1449:1970
Conical Shaft Ends with External Thread; Dimensions (FOREIGN STANDARD)
DIN 1448-1:1970
Clevis pins with head and stud end (FOREIGN STANDARD)
DIN 1445:1977
DIN 1441:1974
Washers; Type Coarse for Bolts (FOREIGN STANDARD)
DIN 13-9:1999
General purpose ISO metric screw threads - Limits of size for 1 mm to 68 mm diameter coarse pitch threads with recommended tolerance classes (FOREIGN STANDARD)
DIN 13-8:1999
General purpose ISO metric screw threads - Nominal sizes for 3 mm fine pitch threads with diameters from 28 mm to 300 mm (FOREIGN STANDARD)
DIN 13-7:1999
General purpose ISO metric screw threads - Nominal sizes for 2 mm fine pitch threads with diameters from 17 mm to 300 mm (FOREIGN STANDARD)
DIN 13-6:1999
General purpose ISO metric screw threads - Nominal sizes for 1,5 mm fine pitch threads with diameters from 12 mm to 300 mm (FOREIGN STANDARD)
DIN 13-52:1999
General purpose ISO metric screw threads - Tolerances for multi-start threads (FOREIGN STANDARD)
DIN 13-50:1999
General purpose ISO metric screw threads - Tolerances for cold-formed internal threads (FOREIGN STANDARD)
DIN 13-5:1999
General purpose ISO metric screw threads - Nominal sizes for 1 mm and 1,25 mm fine pitch threads with diameters from 7,5 mm to 200 mm (FOREIGN STANDARD)
DIN 13-4:1999
General purpose ISO metric screw threads - Nominal sizes for 0,75 mm fine pitch threads with diameters from 5 mm to 110 mm (FOREIGN STANDARD)
DIN 13-3:1999
General purpose ISO metric screw threads - Nominal sizes for 0,5 mm fine pitch threads with diameters from 3,5 mm to 90 mm (FOREIGN STANDARD)
DIN 13-28:1975
ISO Metric Screw Threads; Coarse and Fine Screw Threads from 1 to 250 mm Screw Thread Diameter; Root Cross-sections, Tensile Stress Cross-sections and Pitch Angles (FOREIGN STANDARD)
DIN 13-20:2000
General purpose ISO metric screw threads - Part 20: Limits of size for 1 mm to 68 mm diameter coarse pitch threads with recommended tolerance classes (FOREIGN STANDARD)
DIN 13-2:1999
General purpose ISO metric screw threads - Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads with diameters from 1 mm to 50 mm (FOREIGN STANDARD)
DIN 13-19:1999
General purpose ISO metric screw threads - Nominal profiles (FOREIGN STANDARD)
DIN 13-11:1999
General purpose ISO metric screw threads - Nominal sizes for 8 mm fine pitch threads with diameters from 130 mm to 1 000 mm (FOREIGN STANDARD)
DIN 13-10:1999
General purpose ISO metric screw threads - Nominal sizes for 6 mm fine pitch threads with diameters from 70 mm to 500 mm (FOREIGN STANDARD)
DIN 13-1:1999
General purpose ISO metric screw threads - Nominal sizes for 1 mm to 68 mm diameter coarse pitch threads (FOREIGN STANDARD)
DIN 124:1993
Steel round head rivets with nominal diameters from 10 to 36 mm (FOREIGN STANDARD)
DIN 118-1:1977
Driving Elements; Pedestal Plain Bearings for General Mechanical Engineering Applications; Main Dimensions (FOREIGN STANDARD)
DIN 1163:1973
Moulding nails (FOREIGN STANDARD)
DIN 116:1971
Driving Elements; Flange Couplings, Dimensions, Torques, Speeds (FOREIGN STANDARD)
DIN 1158:1973
Wall hooks (FOREIGN STANDARD)
Decorator's tacks (FOREIGN STANDARD)
DIN 1157:1973
DIN 1143-1:1982
Round plain head nails for use in automatic nailing machines (FOREIGN STANDARD)
DIN 11204:2008
Fasteners - Inspection documents - List of information and description (FOREIGN STANDARD)
DIN 111:1982
Driving elements; Pulleys for flat transmission belts; Dimensions, nominal torsional moments (FOREIGN STANDARD)
DIN 11024:1973
Spring Cotters (FOREIGN STANDARD)
DIN 109-2:1973
Driving Elements; Centre Distances for V-belt Drives (FOREIGN STANDARD)
DIN 109-1:1973
Driving Elements; Circumferential Speeds (FOREIGN STANDARD)
DIN 103-8:1972
ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter (FOREIGN STANDARD)
DIN 103-7:1972
ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter (FOREIGN STANDARD)
DIN 103-6:1972
ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter (FOREIGN STANDARD)
DIN 103-5:1972
ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter (FOREIGN STANDARD)
DIN 103-4:1977
ISO Metric Trapezoidal Screw Thread; Nominal Dimensions (FOREIGN STANDARD)
DIN 103-3:1977
ISO Metric Trapezoidal Screw Thread; Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose (FOREIGN STANDARD)
DIN 103-2:1977
ISO Metric Trapezoidal Screw Thread; General Plan (FOREIGN STANDARD)
DIN 103-1:1977
ISO Metric Trapezoidal Screw Thread; Profiles (FOREIGN STANDARD)
DIN 101:1993
Rivets; technical specifications (FOREIGN STANDARD)DIN Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
