BIS Standards Catalogue
BS EN 4372:2009 BS EN 4372:2009. Aerospace series. Heat resisting nickel alloy with copper NI-PD9001 (NiCu31). Wire for solid rivets. D ≤ 10 mm
PAS 5308-1:2009 PAS 5308-1:2009. Control and instrumentation cables. Specification for polyethylene insulated cables
PAS 5308-2:2009 PAS 5308-2:2009. Control and instrumentation cables. Specification for PVC insulated cables
09/30200348 DC 09/30200348 DC. BS EN ISO 544. Welding consumables. Technical delivery conditions for filler materials and fluxes. Type of product, dimensions, tolerances and markings
09/30200381 DC 09/30200381 DC. BS 7928-2. Head and face protection for cricketers. Part 2. Face protectors for cricket wicket-keepers
09/30200445 DC 09/30200445 DC. BS EN 15191. Precast concrete products. Classification of glass-fibre reinforced concrete performances
09/30200468 DC 09/30200468 DC. BS EN 15942. Sustainability of construction works. Environmental product declarations. Communication format. Business to Business
BS EN 3613:2009 BS EN 3613:2009. Aerospace series. Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NIPH2601 (Inconel 718), silver plated. Classification:
09/30200633 DC 09/30200633 DC. BS ISO 4641. Rubber hoses and hose assemblies for water suction and discharge. Specification
BS ISO/IEC 7811-2:2001 BS ISO/IEC 7811-2:2001. Identification cards. Recording technique. Magnetic stripe. Low coercivity
09/30200754 DC 09/30200754 DC. BS ISO 18275. Welding consumables. Covered electrodes for manual metal arc welding of high-strength steels. Classification
BS ISO 27448:2009 BS ISO 27448:2009. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for self-cleaning performance of semiconducting photocatalytic materials. Measurement o
09/30200831 DC 09/30200831 DC. BS EN 15312 AMD1. Free access multi-sports equipment. Requirements, including safety, and test methods
09/30200834 DC 09/30200834 DC. BS EN 1559-1. Founding. Technical conditions of delivery. Part 1. General
09/30200837 DC 09/30200837 DC. BS EN 1560. Founding. Designation system for cast iron. Material symbols and material numbers
09/30200840 DC 09/30200840 DC. BS EN 1564. Founding. Ausferritic spheroidal graphite cast iron
09/30200844 DC 09/30200844 DC. BS EN 779. Particulate air filters for general ventilation. Determination of the filtration performance
09/30200854 DC 09/30200854 DC. BS EN 12816. LPG equipment and accessories. Transportable refillable LPG cylinders. Disposal
09/30200857 DC 09/30200857 DC. BS EN 13109. Liquefied petroleum gas equipment and accessories. LPG tanks. Disposal
BS EN ISO 14971:2009 BS EN ISO 14971:2009. Medical devices. Application of risk management to medical devices
09/30200982 DC 09/30200982 DC. BS EN ISO 24034. Welding consumables. Solid wires and rods for fusion welding of titanium and titanium alloys. Classification
09/30201029 DC 09/30201029 DC. BS 6089. Assessment of in-situ compressive strength in structures and precast concrete components. Complementary guidance to that given in BS EN 13791
PD IEC/TR 62343-6-2:2009 PD IEC/TR 62343-6-2:2009. Dynamic modules. Software and hardware interfaces. Survey results
BS EN 4074:2009 BS EN 4074:2009. Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1100
BS EN 4137:2009 BS EN 4137:2009. Aerospace series. Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient tempe
BS EN 2883:2009 BS EN 2883:2009. Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient te
BS EN 4136:2009 BS EN 4136:2009. Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient tem
BS EN 4135:2009 BS EN 4135:2009. Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1
09/30201200 DC 09/30201200 DC. BS 3HR 201. Specification for Nickel-chromium-titanium aluminium heat-resisting alloy plate, sheet and strip (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)
09/30201203 DC 09/30201203 DC. BS 3HR 202. Specification for Nickel-chromium-cobalt-titanium aluminium heat-resisting alloy sheet and strip (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
09/30201205 DC 09/30201205 DC. BS 2HR 203. Specification for Nickel-chromium-titanium heat-resisting alloy plate, sheet and strip (Nickel base, Cr 19.5, Ti 0.4)
09/30201208 DC 09/30201208 DC. BS 2HR 204. Specification for Nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy sheet and strip (Nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)
09/30201210 DC 09/30201210 DC. BS 2HR 205. Specification for Nickel-copper alloy sheet and strip: annealed (Nickel base, Cu 31)
09/30201213 DC 09/30201213 DC. BS 2HR 206. Specification for Nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (Nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1
09/30201215 DC 09/30201215 DC. BS 2HR 207. Specification for Nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2
09/30201218 DC 09/30201218 DC. BS 2HR 208. Specification for Nickel-chromium-iron alloy plate, sheet and strip: annealed (Nickel base, Cr 15.5, Fe 8)
09/30201228 DC 09/30201228 DC. BS EN 81-73 AMD1. Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts. Part 73. Behaviour of lif
09/30201231 DC 09/30201231 DC. BS EN 15080-13. Extended application of results from fire resistance tests. Part 13. Loadbearing columns
BS EN 3475-407:2009 BS EN 3475-407:2009. Aerospace series. Cables, electrical, aircraft use. Test methods. Flammability
BS EN 3052:2009 BS EN 3052:2009. Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa
09/30201278 DC 09/30201278 DC. BS EN 15943. Curriculum Exchange Format (CEF) Data Model
09/30201334 DC 09/30201334 DC. BS ISO 13127. Packaging. Child resistant packaging. Mechanical test methods for reclosable child resistant packaging systems
09/30201361 DC 09/30201361 DC. BS ISO 12643-2. Graphic technology. Safety requirements for graphic technology equipment and systems. Part 2. Press equipment and systems
ISO/IEC14496-5 AMD19 (06/09) CD HEADER ISO/IEC14496-5 AMD19 (06/09) CD HEADER. ISO/IEC 14496-5 Information technology - Coding of audio-visual objects. Part 5: Reference software
09/30201423 DC 09/30201423 DC. BS EN 15944. Liquid petroleum products. Determination of nickel and vanadium content. Inductively coupled plasma optical emission spectrometry (ICP OES)
09/30201429 DC 09/30201429 DC. BS EN 280. Mobile elevating work platforms. Design calculations. Stability criteria. Construction. Safety. Examinations and tests
09/30201444 DC 09/30201444 DC. BS EN 15945. Packaging. Ease of opening. Criteria and test method for evaluating consumer packaging
09/30201447 DC 09/30201447 DC. BS EN 15946. Conservation of cultural property. Packing methods
09/30201486 DC 09/30201486 DC. BS EN 10305-1. Steel tubes for precision applications. Technical delivery conditions. Part 1. Seamless cold drawn tubes
09/30201490 DC 09/30201490 DC. BS EN 10305-2. Steel tubes for precision applications. Technical delivery conditions. Part 2. Welded cold drawn tubes
09/30201494 DC 09/30201494 DC. BS EN 10305-3. Steel tubes for precision applications. Technical delivery conditions. Part 3. Welded cold sized tubes
09/30201500 DC 09/30201500 DC. BS EN 10305-5. Steel tubes for precision applications. Technical delivery conditions. Part 5. Welded and cold sized square and rectangular tubes
BS EN 3614:2009 BS EN 3614:2009. Aerospace series. Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated. Classification: 900 MPa/650°C
09/30201771 DC 09/30201771 DC. BS 2HR 40. Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (Cobalt base, Cr 20, W 15, Ni 10, Mn 1.5)
09/30201774 DC 09/30201774 DC. BS 2HR 51. Specification for high expansion heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Solution treat
09/30201778 DC 09/30201778 DC. BS 2HR 52. Specification for heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3)
09/30201781 DC 09/30201781 DC. BS 2HR 53. Specification for nickel-iron-chromium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 42.5, Cr 12.5, Mo 5.8, Ti 3.0, Fe rem
09/30201787 DC 09/30201787 DC. BS 2HR 55. Specification for nickel-iron-chromium-molybdenum-aluminium- titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al
09/30201792 DC 09/30201792 DC. BS 2HC 100. Procedure for inspection, testing and acceptance of iron, nickel, copper, cobalt and refractory metal base alloy castings
09/30201849 DC 09/30201849 DC. BS ISO/IEC 19785-1 AMD1. Information technology. Common biometric formats framework. Part 1. Data element specification
09/30201852 DC 09/30201852 DC. BS ISO/IEC 19785-2 AMD1. Information technology. Common biometric exchange formats framework. Part 2. Procedures for the operation of the biometric registration authorit
09/30201855 DC 09/30201855 DC. BS ISO/IEC 19785-3 AMD1. Information Technology. Common biometric exchange formats framework. Part 3. Patron format specifications
09/30201899 DC 09/30201899 DC. BS EN 1949. Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles
09/30201902 DC 09/30201902 DC. BS EN 624. Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats
09/30201908 DC 09/30201908 DC. BS EN 15947-1. Pyrotechnic articles. Fireworks, categories 1, 2, and 3. Part 1. Terminology
09/30201912 DC 09/30201912 DC. BS EN 15947-2. Pyrotechnic articles. Fireworks, categories 1, 2, and 3. Part 2. Categories and types of firework
09/30201915 DC 09/30201915 DC. BS EN 15947-3. Pyrotechnic articles. Fireworks, categories 1, 2, and 3. Part 3. Minimum labelling requirements
09/30201918 DC 09/30201918 DC. BS EN 15947-4. Pyrotechnic articles. Fireworks, categories 1, 2 and 3. Part 4. Test methods
09/30201921 DC 09/30201921 DC. BS EN 15947-5. Pyrotechnic articles. Fireworks, categories 1, 2, and 3. Part 5. Requirements for construction and performance
09/30201943 DC 09/30201943 DC. BS EN ISO 12625-8. Tissue paper and tissue products. Part 8. Water-absorption time and water-absorption capacity, basket-immersion test method
09/30201953 DC 09/30201953 DC. BS EN ISO 14271. Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
09/30201986 DC 09/30201986 DC. BS EN 12697-45. Bituminous mixtures. Test methods for hot mix asphalt. Part 45. Saturation Ageing Tensile Stiffness (SATS) Conditioning Test
09/30201989 DC 09/30201989 DC. BS EN 15950. Fertilizers. Determination of N-(1,2-dicarboxyethyl) D,L aspartic acid (Imino-di-succinic-acid, IDHA) using high-performance liquid chromatography (HPLC)
09/30201992 DC 09/30201992 DC. BS EN 12182. Assistive products for persons with disability. General requirements and test methods
09/30201995 DC 09/30201995 DC. BS EN 15949. Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills
09/30201998 DC 09/30201998 DC. BS EN 15948. Cereals. Determination of moisture and protein. Method using Near-Infrared-Transmittance in combination with an Artificial Neural Network (ANN) Prediction M
09/30202002 DC 09/30202002 DC. BS EN 15358. Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels
09/30202006 DC 09/30202006 DC. BS EN 15359. Solid recovered fuels. Specifications and classes
09/30202009 DC 09/30202009 DC. BS EN 15440. Solid recovered fuels. Method of the determination of biomass content
09/30202012 DC 09/30202012 DC. BS EN 15442. Solid recovered fuels. Methods for sampling
09/30202015 DC 09/30202015 DC. BS EN 15443. Solid recovered fuels. Methods for the preparation of the laboratory sample
BS EN 3733-001:2009 BS EN 3733-001:2009. Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous. Technical specifica
BS EN 3745-506:2009 BS EN 3745-506:2009. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Impact resistance
09/30202029 DC 09/30202029 DC. BS EN 13852-1. Cranes. Offshore cranes. Part 1. General-purpose offshore cranes
09/30202136 DC 09/30202136 DC. BS EN ISO 32100. Rubber- or plastics-coated fabrics. Physical and mechanical tests. Determination of flex resistance by the flexometer method
09/30202155 DC 09/30202155 DC. BS EN ISO 27953-1. Health informatics. Pharmacovigilance. Individual case safety Report. Part 1. The framework for adverse event reporting
09/30202159 DC 09/30202159 DC. BS EN ISO 27953-2. Health informatics. Pharmacovigilance. Individual case safety report. Part 2. Human pharmaceutical reporting requirements for ICSR
BS EN ISO 5492:2009 BS EN ISO 5492:2009. Sensory analysis. Vocabulary
09/30202228 DC 09/30202228 DC. BS ISO/IEC 23002-4 AMD1. Information technology. MPEG video technologies. Part 4. Video tool library
BIP 0050:2009 BIP 0050:2009. Data Protection Pocket Guide. Essential Facts at Your Fingertips, Second Edition
09/30202303 DC 09/30202303 DC. BS EN 13420. Windows. Behaviour between different climates. Test method
09/30202307 DC 09/30202307 DC. BS EN 12514-1. Parts for supply systems for consuming units with liquid fuels. Part 1. Safety requirements and tests. Terminology, general requirements
09/30202310 DC 09/30202310 DC. BS EN 12514-2. Parts for supply systems for consuming units with liquid fuels. Part 2. Safety requirements and tests. Feed pumps, control and safety devices, service ves
09/30202313 DC 09/30202313 DC. BS EN 12514-3. Parts for supply systems for consuming units with liquid fuels. Part 3. Safety requirements and tests. Valves and meters
09/30202316 DC 09/30202316 DC. BS EN 12514-4. Parts for supply systems for consuming units with liquid fuels. Part 4. Safety requirements and tests. Pipings and parts within pipelines
BS EN 9100:2009 BS EN 9100:2009. Aerospace series. Quality management systems. Requirements (based on ISO 9001:2000) and Quality systems. Model for quality assurance in design, development, production
ISO/IEC14776-414 : 2009 EDTN1 ISO/IEC14776-414 : 2009 EDTN1. ISO/IEC 14776-414 Information technology - Small computer system interface (SCSI) - . Part 414: Architecture model-4 (SAM-4)
BS EN 2812:2009 BS EN 2812:2009. Aerospace series. Stripping of electric cables
09/30202466 DC 09/30202466 DC. BS ISO 9815. Road vehicles. Passenger-car and trailer combinations. Lateral stability test
09/30202519 DC 09/30202519 DC. BS EN 312. Particleboards. Specifications
09/30202529 DC 09/30202529 DC. BS EN 15954-1. Railway applications. Track. Trailers and associated equipment. Part 1. Technical requirements for running and working
09/30202532 DC 09/30202532 DC. BS EN 15954-2. Railway applications. Track. Trailers and associated equipment. Part 2. General safety requirements
09/30202535 DC 09/30202535 DC. BS EN 15955-1. Railway applications. Track. Demountable machines and associated equipment. Part 1. Technical requirements for running and working
09/30202538 DC 09/30202538 DC. BS EN 15955-2. Railway applications. Track. Demountable machines and associated equipment. Part 2. General safety requirements
09/30202541 DC 09/30202541 DC. BS EN 15380-4. Railway applications. Classification system for railway vehicles. Part 4. Function groups
BIP 2185 BIP 2185. Communication Strategies: Write Your Incident Communication Plan Now
09/30202626 DC 09/30202626 DC. BS EN ISO 12474. Hexagon socket head cap screws with metric fine pitch thread
09/30202630 DC 09/30202630 DC. BS ISO 4249-3. Motorcycle tyres and rims (code-designated series). Part 3. Rims
09/30202633 DC 09/30202633 DC. BS ISO 5751-1. Motorcycle tyres and rims (metric series). Part 1. Design guides
09/30202636 DC 09/30202636 DC. BS ISO 5751-2. Motorcycle tyres and rims (metric series). Part 2. Tyre dimensions and load-carrying capacities
09/30202639 DC 09/30202639 DC. BS ISO 5751-3. Motorcycle tyres and rims (metric series). Part 3. Range of approved rim contours
09/30202667 DC 09/30202667 DC. BS ISO 13674-1. Road vehicles. Test method for the quantification of on-centre handling. Part 1. Weave test
09/30202711 DC 09/30202711 DC. BS EN 1267. Industrial valves. Test of flow resistance using water as test fluid
09/30202714 DC 09/30202714 DC. BS EN 12266-1. Industrial valves. Testing of metallic valves. Part 1. Pressure tests, test procedures and acceptance criteria. Mandatory requirements
09/30202717 DC 09/30202717 DC. BS EN 12266-2. Industrial valves. Testing of metallic valves. Part 2. Tests, test procedures and acceptance criteria. Supplementary requirements
09/30202720 DC 09/30202720 DC. BS EN 15962. Fertilizers. Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients
09/30202737 DC 09/30202737 DC. BS EN 15964. Breath alcohol test devices other than single use devices. Requirements and test methods
BIP 2013:2009 BIP 2013:2009. Understanding ISO 9001:2008 and Process-based Management Systems (Second Edition)
BIP 2014:2009 BIP 2014:2009. Creating a Process-based Management System for ISO 9001:2008 and Beyond (Second Edition)
BIP 2015:2009 BIP 2015:2009. Process Management Auditing for ISO 9001:2008 (Second Edition)
09/30202799 DC 09/30202799 DC. BS EN 1300 AMD1. Secure storage units. Classification for high security locks according to their resistance to unauthorized opening
09/30203004 DC 09/30203004 DC. BS 8493 AMD1. Light reflectance value (LRV) of a surface. Method of test
09/30203020 DC 09/30203020 DC. BS 7972 AMD1. Safety requirements and test methods for children's bedguards for domestic use
09/30203024 DC 09/30203024 DC. BS 8423. Fireguards for fires and heating appliances for domestic use. Specification
09/30203037 DC 09/30203037 DC. BS EN 15407. Solid recovered fuels. Method for the determination of carbon (C), hydrogen (H) and nitrogen (N) content
09/30203040 DC 09/30203040 DC. BS EN 15408. Solid recovered fuels. Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content
09/30203049 DC 09/30203049 DC. BS EN 10351. Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of low alloyed steels. Determination of Mn, P, Cu
BS EN ISO 23553-1:2009 BS EN ISO 23553-1:2009. Safety and control devices for oil burners and oil-burning appliances. Particular requirements. Shut-off devices for oil burners
09/30203147 DC 09/30203147 DC. BS ISO/IEC 15444-1 AMD4. Information technology. JPEG 2000 image coding system. Part 1. Core coding system
09/30203214 DC 09/30203214 DC. BS ISO 11790. Copper, lead, zinc and nickel concentrates. Guidelines for the inspection of mechanical sampling systems
09/30203217 DC 09/30203217 DC. BS ISO 11794. Copper, lead, zinc and nickel concentrates. Sampling of slurries
09/30203301 DC 09/30203301 DC. BS EN 13739-2. Agricultural machinery. Solid fertilizer broadcasters and full width distributors. Environmental protection. Part 2. Test methods
09/30203307 DC 09/30203307 DC. BS EN 14636-2. Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC). Part 2. Manholes and inspection chambers
09/30203310 DC 09/30203310 DC. BS EN 15090. Footwear for firefighters
09/30203324 DC 09/30203324 DC. BS EN 15969-1. Tanks for transport of dangerous goods. Digital interface for the data transfer between tank vehicle and with stationary facilities. Part 1. Protocol spec
09/30203421 DC 09/30203421 DC. BS 5950-3.1 AMD1. Structural use of steelwork in building. Part 3. Design in composite construction. Code of practice for design of simple and continuous composite beams
BS EN ISO 527-5:2009 BS EN ISO 527-5:2009. Plastics. Determination of tensile properties. Test conditions for unidirectional fibre-reinforced plastic composites
09/30203506 DC 09/30203506 DC. BS EN 61534-1. Powertrack systems. Part 1. General requirements
09/30203522 DC 09/30203522 DC. BS ISO 1174-1. Assembly tools for screws and nuts. Driving squares. Part 1. Driving squares for hand socket tools
09/30203525 DC 09/30203525 DC. BS ISO 2236. Assembly tools for screws and nuts. Forged and tubular socket wrenches. Maximum outside head dimensions
09/30203528 DC 09/30203528 DC. BS ISO 3315. Assembly tools for screws and nuts. Driving parts for handoperated square drive socket wrenches. Dimensions and tests
DD IEC/PAS 61076-2-108:2009 DD IEC/PAS 61076-2-108:2009. Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for glass to metal seal style M12 connecto
09/30203673 DC 09/30203673 DC. BS 7371-7. Coatings on metal fasteners. Part 7. Specification for mechanically applied zinc and zinc based coatings
09/30203680 DC 09/30203680 DC. BS EN 60034-16-1. Rotating electrical machines. Part 16-1. Excitation systems for synchronous machines. Definitions
09/30203688 DC 09/30203688 DC. BS 7861-2. Strata reinforcement support systems components used in coal mines. Part 2. Specification for flexible systems for roof reinforcement
09/30203716 DC 09/30203716 DC. PD 6662. Scheme for the application of European Standards for intrusion and hold-up alarm systems
09/30203717 DC 09/30203717 DC. BS ISO 4603 AMD1. Textile glass. Woven fabrics. Determination of thickness
09/30203720 DC 09/30203720 DC. BS 8532. Terminal units for anaesthetic gas scavenging systems
09/30203722 DC 09/30203722 DC. BS EN 60745-2-3 AMD. Hand-held motor-operated electric tools. Safety. Part 2-3. Particular requirements for grinders, polishers and disk-type sanders
09/30203725 DC 09/30203725 DC. BS EN 60335-2-11 AMD. Household and similar electrical appliances. Safety. Part 2-11. Particular requirements for tumble dryers
CWA 15965:2009 CWA 15965:2009. Consumer confidence and nomenclature in the diamond industry
BS EN 15016-4:2006 BS EN 15016-4:2006. Technical drawings. Railway applications. Data exchange
CWA 15966:2009 CWA 15966:2009. Guidelines and recommendations for building metadata application profiles for agricultural learning resources
ISO/TS22745-30 : 2009 (CD-ROM) HEADER ISO/TS22745-30 : 2009 (CD-ROM) HEADER. ISO/TS 22745-30 Industrial automation systems and integration - Open technical dictionaries and their application to master
09/30203808 DC 09/30203808 DC. BS EN ISO 80601-2-12. Medical electrical equipment. Part 2-12. Particular requirements for basic safety and essential performance of critical care ventilators
09/30203828 DC 09/30203828 DC. BS EN 62614. Fibre optics. Launch condition requirements for measuring multimode attenuation
09/30203832 DC 09/30203832 DC. BS EN 60335-2-24 AMD. Household and similar electrical appliances. Safety. Part 2-24. Particular requirements for refrigerating appliances, ice-cream appliances and ice-
09/30203839 DC 09/30203839 DC. BS EN 61730-1 AMD1. Photovoltaic (PV) module safety qualification. Part 1. Requirements for construction
09/30203843 DC 09/30203843 DC. BS EN 61730-2 AMD1. Photovoltaic (PV) module safety qualification. Part 2. Requirements for testing
09/30203912 DC 09/30203912 DC. BS EN 12566-7. Small wastewater treatment systems for up to 50 PT. Part 7. Prefabricated tertiary treatment units
09/30203919 DC 09/30203919 DC. BS EN 15972. Water quality. Guidance on quantitative and qualitative investigations of marine phytoplankton
09/30204029 DC 09/30204029 DC. BS EN 61439-1. Low-voltage switchgear and controlgear assemblies. Part 1. General rules
09/30204033 DC 09/30204033 DC. BS EN 61439-2. Low-voltage switchgear and controlgear assemblies. Part 2. Power switchgear and controlgear assemblies
CWA 15971-4:2009 CWA 15971-4:2009. Discovery of and access to eGovernment resources. Federated terminological resources
CWA 15971-5:2009 CWA 15971-5:2009. Discovery of and access to eGovernment resources. Establishment of a set of soft cultural elements
BS EN ISO 14159:2008 BS EN ISO 14159:2008. Safety of machinery. Hygiene requirements for the design of machinery
09/30204072 DC 09/30204072 DC. BS EN 62612. Self-ballasted led-lamps for general lighting services $0G 50 V. Performance requirements
09/30204130 DC 09/30204130 DC. BS ISO 11217. Aerospace. Hydraulic system fluid contamination. Location of sampling points and criteria for sampling
09/30204136 DC 09/30204136 DC. BS ISO 30002. Ships and marine technology. Ship recycling management systems. Guidelines for selection of ship recyclers (and pro forma contract)
09/30204161 DC 09/30204161 DC. BS EN 62631-1. Guidelines for the determination of dielectric and resistive properties of solid insulating materials. Part 1. General considerations
09/30204183 DC 09/30204183 DC. BS EN 88-1. Pressure regulators and associated safety devices for gas appliances. Part 1. Pressure regulators for inlet pressures up to and including 500 mbar
09/30204189 DC 09/30204189 DC. BS EN 1080. Impact protection helmets for young children
09/30204193 DC 09/30204193 DC. BS EN 15975-1. Security of drinking water supply. Guidelines for risk and crisis management. Part 1. Crisis management
09/30204197 DC 09/30204197 DC. BS EN 15977. Rubber or plastic coated fabrics. Mechanical properties. Determination of the elongation under load and the residual deformation
09/30204200 DC 09/30204200 DC. BS EN 15976. Flexible sheets for waterproofing. Determination of emissivity
09/30204245 DC 09/30204245 DC. BS EN 61300-2-6. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-6. Tests. Tensile strength of coupling mechani
09/30204275 DC 09/30204275 DC. BS EN 61300-2-17. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-17. Tests. Cold
09/30204284 DC 09/30204284 DC. BS EN 61300-3-39. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-39. Examinations and measurements. PC optical
09/30204320 DC 09/30204320 DC. BS EN 60730-2-9 AMD1. Automatic electrical controls for household and similar use. Part 2-9. Particular requirements for temperature sensing controls
09/30204325 DC 09/30204325 DC. BS EN 4156. Aerospace series. Rod ends, with self-aligning double row ball bearings and threaded shank in steel. Inner ring and balls in corrosion resisting steel. Dimen
09/30204326 DC 09/30204326 DC. BS EN 4351. Aerospace series. Rodends, with self- aligning double row ball bearings and threaded shank in corrosion resisting steel. Dimensions and loads. Inch series
09/30204341 DC 09/30204341 DC. BS EN 61968-11. Application integration at electric utilities. System Interfaces for Distribution Management. Part 11. Common Information Model (CIM) Extensions for Dist
ISO/IEC14496-10 : 2009 (CD-ROM) HEAD ED5 ISO/IEC14496-10 : 2009 (CD-ROM) HEAD ED5. ISO/IEC 14496-10 Information technology. Coding of audio-visual objects. Part 10: Advanced Video Coding
CWA 15974:2009 CWA 15974:2009. Interoperability of the electronic European health insurance cards (WS/eEHIC)
09/30204355 DC 09/30204355 DC. BS ISO TS 10004. Quality management. Customer Satisfaction. Guidelines for monitoring and measuring
09/30204363 DC 09/30204363 DC. BS EN 6029. Aerospace series. Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement. 1,5 x thread diameter in corrosion resisting steel. Dimensions a
09/30204364 DC 09/30204364 DC. BS EN 6104. Aerospace series. Rivets, solid, in aluminium or aluminium alloy. Inch series. Technical specification
09/30204366 DC 09/30204366 DC. BS EN 4604-009. Aerospace series. Cable, electrical, for signal transmission. Part 009. Cable, coaxial, light weight, 50 Ohms, 180°C, type KW (light WN). Product standar
BS EN ISO 9612:2009 BS EN ISO 9612:2009. Acoustics. Determination of occupational noise exposure. Engineering method
09/30204372 DC 09/30204372 DC. BS EN 4604-010. Aerospace series. Cable, electrical, for signal transmission. Part 010. Cable, coaxial, light weight, 50 Ohms, 200°, type KX (light WD). Product standard
09/30204398 DC 09/30204398 DC. BS EN 15978. Sustainability of construction works. Assessment of environmental performance of buildings. Calculation method
09/30204406 DC 09/30204406 DC. BS ISO 1268-4 AMD1. Fibre-reinforced plastics. Methods of producing test plates. Part 4. Moulding of prepregs
09/30204441 DC 09/30204441 DC. BS EN 62554. Measurement of mercury level in fluorescent lamps
09/30204447 DC 09/30204447 DC. BS EN 60352-5. Solderless connections. Part 5. Press-in connections. General requirements, test methods and practical guidance
09/30204515 DC 09/30204515 DC. BS EN 3528. Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar. De ≤ 150 mm. 1 750 MPa ≤
BS IEC 60951-1:2009 BS IEC 60951-1:2009. Nuclear power plants. Instrumentation important to safety. Radiation monitoring for accident and post-accident conditions. General requirements
BS IEC 60951-2:2009 BS IEC 60951-2:2009. Nuclear power plants. Instrumentation important to safety. Radiation monitoring for accident and post-accident conditions. Equipment for continuous off-line mo
09/30204584 DC 09/30204584 DC. BS 5892-1 AMD3. Railway rolling stock materials. Part 1. Specification for axles for traction and trailing stock
DD ISO/PAS 17712:2006 DD ISO/PAS 17712:2006. Freight containers. Mechanical seals
09/30204653 DC 09/30204653 DC. BS EN 61231. International lamp coding system (ILCOS)
09/30204713 DC 09/30204713 DC. BS EN 61853-1. Photovoltaic (PV) module performance testing and energy rating. Part 1. Irradiance and temperature performance measurements and power rating
09/30204721 DC 09/30204721 DC. BS ISO/IEC 9798-1. Information technology. Security techniques. Entity authentication. Part 1. General
09/30204735 DC 09/30204735 DC. BS 7533-3 AMD1. Pavements constructed with clay, natural stone or concrete pavers. Part 3. Code of practice for laying precast concrete paving blocks and clay pavers for
09/30204740 DC 09/30204740 DC. BS EN 61300-3-33. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-33. Examinations and measurements. Ferrule wi
09/30204756 DC 09/30204756 DC. BS ISO/IEC 11770-1. Information technology. Security techniques. Key management. Part 1. Framework
09/30204814 DC 09/30204814 DC. BS EN 374-1. Protective gloves against chemicals and micro-organisms. Part 1. Terminology and performance requirements
09/30204823 DC 09/30204823 DC. BS EN 15981. European Learner Mobility Model
09/30204826 DC 09/30204826 DC. BS EN 15982. Metadata for Learning Opportunities (MLO). Advertising
09/30204832 DC 09/30204832 DC. BS EN 71-1 AMD11. Safety of toys. Part 1. Mechanical and physical properties
BS EN ISO 10993-15:2009 BS EN ISO 10993-15:2009. Biological evaluation of medical devices. Identification and quantification of degradation products from metals and alloys
09/30204924 DC 09/30204924 DC. BS EN 62455. Internet protocol (IP) and transport stream (TS) based service access (TA1)
09/30204928 DC 09/30204928 DC. BS EN 61834-4 AMD1. Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1125-50 sys
09/30204997 DC 09/30204997 DC. BS ISO 13526. Space data and information transfer systems. Tracking data message
09/30205000 DC 09/30205000 DC. BS ISO 13527. Space data and information transfer systems. XML formatted data unit (XFDU) structure and construction rules
09/30205003 DC 09/30205003 DC. BS ISO 13537. Space data and information transfer systems. Reference architecture for space data systems
09/30205006 DC 09/30205006 DC. BS ISO 13541. Space data and information transfer systems. Attitude data messages
09/30205023 DC 09/30205023 DC. BS EN 61158-2. Industrial communication networks. Fieldbus specifications. Part 2. Physical layer specification and service definition
09/30205027 DC 09/30205027 DC. BS EN 4265. Aerospace series. Bearing spherical plain, metal to metal in corrosion resisting steel, wide series. Dimensions and loads. Inch series
ISO/IEC13818-4 AMD3 (06/09) CD HEADER ISO/IEC13818-4 AMD3 (06/09) CD HEADER. ISO/IEC 13818-4 Information technology. Generic coding of moving pictures and associated audio information. Part 4: Conform
09/30205059 DC 09/30205059 DC. BS EN 1804-1 AMD1. Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 1. Support units and general requirements
09/30205062 DC 09/30205062 DC. BS EN 1804-2 AMD1. Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 2. Power set legs and rams
09/30205065 DC 09/30205065 DC. BS EN 1804-3 AMD1. Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 3. Hydraulic control systems
09/30205068 DC 09/30205068 DC. BS EN 1151-1. Pumps. Rotodynamic pumps. Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations.
09/30205119 DC 09/30205119 DC. BS EN 14397-1. Fertilizers and liming materials. Determination of carbon dioxide. Part 1. Method for solid fertilizers
09/30205122 DC 09/30205122 DC. BS EN 15583-2. Winter maintenance equipment. Snow ploughs. Part 2. Testing criteria and their requirements
09/30205125 DC 09/30205125 DC. BS EN 15400. Solid recovered fuels. Determination of calorific value
09/30205128 DC 09/30205128 DC. BS EN 15402. Solid recovered fuels. Determination of the content of volatile matter
09/30205131 DC 09/30205131 DC. BS EN 15403. Solid recovered fuels. Determination of ash content
09/30205134 DC 09/30205134 DC. BS EN 15414-3. Solid recovered fuels. Determination of moisture content using the oven dry method. Part 3. Moisture in general analysis sample
09/30205176 DC 09/30205176 DC. BS ISO/TS 25680. Medical laboratories. Calculation and expression of measurement uncertainty
09/30205182 DC 09/30205182 DC. BS EN 50310. Application of equipotential bonding and earthing in buildings with information technology equipment
09/30205253 DC 09/30205253 DC. BS EN 4266. Aerospace series. Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated, wide series. Dimensions and loads. Inch series
09/30205254 DC 09/30205254 DC. BS EN 2481. Aerospace series. Steel FE-PL76. 1250 MPa ≤ Rm ≤ 1400 MPa. Forgings De ≤ 75 mm
09/30205255 DC 09/30205255 DC. BS EN 2482. Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1100 MPa ≤ Rm ≤ 1300 MPa. Bars. De ≤ 100 mm
09/30205256 DC 09/30205256 DC. BS EN 2483. Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1100 MPa ≤ Rm ≤ 1300 MPa. Forgings. De ≤ 100 mm
09/30205261 DC 09/30205261 DC. BS ISO/IEC 19794-2 AMD1. Information technology. Biometric data interchange formats. Part 2. Finger minutiae data
09/30205262 DC 09/30205262 DC. BS EN 61290-4-1. Optical amplifiers. Test methods. Part 4-1. Gain transient parameters. Two-wavelength method
09/30205272 DC 09/30205272 DC. BS EN 61290-4-2. Optical amplifiers. Test methods. Part 4-2. Gain transient parameters. Broadband source method
09/30205276 DC 09/30205276 DC. BS EN 2311. Aerospace series. Bushes with self-lubricating liner. Technical specification
09/30205281 DC 09/30205281 DC. BS EN 50191. Erection and operation of electrical test equipment
09/30205291 DC 09/30205291 DC. BS EN 4165-024. Aerospace series. Connector, electrical, rectangular, modular. Operating temperature 175°C continuous. Part 024. Single module plug
09/30205293 DC 09/30205293 DC. BS EN 4689. Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. High flexibility and chemical agent resistance for military applicatio
09/30205295 DC 09/30205295 DC. BS EN 4165-025. Aerospace series. Connector, electrical, rectangular, modular. Operating temperature 175°C continuous. Part 025. Single module receptacle
09/30205296 DC 09/30205296 DC. BS EN 4165-026. Aerospace series. Connector, electrical, rectangular, modular. Operating temperature 175°C continuous. Part 026. Shielded accessories for single modules
09/30205299 DC 09/30205299 DC. BS EN 4688. Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing epoxy primer. High corrosion resistance for military applicat
09/30205302 DC 09/30205302 DC. BS EN 4687. Aerospace series. Paints and varnishes. Chromate free (non corrosion inhibiting) two component cold curing primer. Chromat free primer for military applicati
09/30205304 DC 09/30205304 DC. BS EN 3280. Aerospace series. Bearings, airframe rolling, rigid or self-aligning. Technical specification
09/30205322 DC 09/30205322 DC. BS EN 61784-2 AMD1. Industrial communication networks. Profiles. Part 2. Additional fieldbus profiles for real-time networks (CPF18)
09/30205326 DC 09/30205326 DC. BS EN 61784-3 AMD1. Industrial communication networks. Profiles. Part 3. Functional safety fieldbuses. Additional specifications for CPF 18
09/30205330 DC 09/30205330 DC. BS EN 61158-3-22. Industrial communication networks. Fieldbus specifications. Part 3-22. Data-link layer service definition. Type 22 elements
09/30205350 DC 09/30205350 DC. BS EN 60695-7-2. Fire hazard testing. Part -7-2. Toxicity of fire effluent. Summary and relevance of test methods
09/30205353 DC 09/30205353 DC. BS EN ISO 20846. Petroleum products. Determination of sulfur content of automotive fuels. Ultraviolet fluorescence method
09/30205358 DC 09/30205358 DC. BS EN ISO 20884. Petroleum products. Determination of sulfur content of automotive fuels. Wavelength-dispersive X-ray fluorescence spectrometry
09/30205384 DC 09/30205384 DC. BS ISO 26262-10. Road vehicles. Functional safety. Part 10. Guideline
09/30205407 DC 09/30205407 DC. BS IEC 60747-1 AMD1. Semiconductor devices. Part 1. General
09/30205410 DC 09/30205410 DC. BS EN 62271-204. High-voltage switchgear and controlgear. Part 204. Rigid high-voltage, gas-insulated transmission lines for rated voltages of 72,5 kV and above
09/30205415 DC 09/30205415 DC. BS EN 60312-1. Vacuum cleaners for houshold use. Part 1. Dry vacuum. Methods for measuring performance
09/30205442 DC 09/30205442 DC. BS EN 61375-1. Electronic railway equipment. Train communication network. Part 1. TCN. Train communication network. General architecture
09/30205446 DC 09/30205446 DC. BS EN 61375-2-1. Electronic railway equipment. Train communication network. Part 2-1. WTB. Wire Train Bus
09/30205450 DC 09/30205450 DC. BS EN 61375-2-2. Electronic railway equipment. Train communication network. Part 2-2. WTB. Wire Train Bus conformance testing
09/30205454 DC 09/30205454 DC. BS EN 61375-3-1. Electronic railway equipment. Train communication network. Part 3-1. MVB. Multipurpose Vehicle Bus
09/30205458 DC 09/30205458 DC. BS EN 61375-3-2. Electronic railway equipment. Train communication network. Part 3-2. MVB. Multipurpose Vehicle Bus conformance testing
09/30205462 DC 09/30205462 DC. BS EN 61375-3-3. Electronic railway equipment. Train communication network. Part 3-3. CCN. CANopen Consist Network Bus
09/30205523 DC 09/30205523 DC. BS EN 14214. Automotive fuels. Fatty acid methyl esters (FAME) for diesel engines. Requirements and test methods
09/30205526 DC 09/30205526 DC. BS EN 197-1. Cement. Part 1. Composition, specifications and conformity criteria for common cements
09/30205529 DC 09/30205529 DC. BS EN 459-3. Building lime. Part 3. Conformity evaluation
09/30205556 DC 09/30205556 DC. BS EN 932-5. Tests for general properties of aggregates. Part 5. Common equipment and calibration
09/30205567 DC 09/30205567 DC. BS EN 15705. Fertilizers. Determination of urea condensates using high performance liquid chromatography (HPLC). Isobutylidenediurea and crotonylidenediurea (method A) a
09/30205570 DC 09/30205570 DC. BS EN 13799. LPG equipment and accessories. Contents gauges for LPG tanks
09/30205573 DC 09/30205573 DC. BS EN 15987. Leather. Terminology. Key definitions for the leather trade
09/30205582 DC 09/30205582 DC. BS EN 15986. Symbol for use in the labelling of medical devices. Requirements for labelling of medical devices containing phthalates
09/30205684 DC 09/30205684 DC. BS 7375. Code of practice for distribution of electricity on construction and building sites
PD ISO/TR 12773-1:2009 PD ISO/TR 12773-1:2009. Business requirements for health summary records. Requirements
BS ISO/IEC 11889-2:2009 BS ISO/IEC 11889-2:2009. Information technology. Trusted platform module. Design principles
BS ISO/IEC 11889-3:2009 BS ISO/IEC 11889-3:2009. Information technology. Trusted platform module. Structures
BS ISO/IEC 11889-4:2009 BS ISO/IEC 11889-4:2009. Information technology. Trusted platform module. Commands
09/30205702 DC 09/30205702 DC. BS EN ISO 15877-1 AMD1. Plastics piping systems for hot and cold water installations. Chlorinated poly (vinyl chloride) (PVC-C). Part 1. General
09/30205706 DC 09/30205706 DC. BS ISO 15877-2 AMD1. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Part 2. Pipes
09/30205715 DC 09/30205715 DC. BS ISO 15877-5 AMD1. Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Part 5. Fitness for purpose of the system
09/30205730 DC 09/30205730 DC. BS ISO/IEC 25040. Software engineering. Software product Quality Requirements and Evaluation (SQuaRE). Evaluation reference model and guide
09/30205773 DC 09/30205773 DC. PD IEC/TR 62153-4-1. Metallic communication cable test methods. Part 4-1. Electromagnetic compatibility (EMC). Introduction to electromagnetic (EMC) screening measuremen
09/30205816 DC 09/30205816 DC. BS ISO 19334. Binders for paints and varnishes. Gum rosin. Gas-chromatographic analysis
09/30205831 DC 09/30205831 DC. BS ISO/IEC 14496-5 AMD2. Information technology. Coding of audio-visual objects. Part 5. Reference software
ISO/IEC/TR29138-1 : 2009 EDTN1 ISO/IEC/TR29138-1 : 2009 EDTN1. ISO/IEC 29138-1 Information technology - Accessibility considerations for people with disabilities - . Part 1: User needs summary
ISO/IEC/TR29138-3 : 2009 EDTN1 ISO/IEC/TR29138-3 : 2009 EDTN1. ISO/IEC/TR 29138-3 Information technology - Accessibility considerations for people with disabilities - . Part 3: Guidance on user needs
ISO/IEC/TR29138-2 : 2009 EDTN1 ISO/IEC/TR29138-2 : 2009 EDTN1. ISO/IEC/TR 29138-2 Information technology - Accessibility considerations for people with disabilities - . Part 2: Standards inventory
09/30205918 DC 09/30205918 DC. BS EN 1794-1. Road traffic noise reducing devices. Non-acoustic performance. Part 1. Mechanical performance and stability requirements
09/30205921 DC 09/30205921 DC. BS EN 1794-2. Road traffic noise reducing devices. Non-acoustic performance. Part 2. General safety and environmental requirements
09/30205947 DC 09/30205947 DC. BS EN 62271-206. High-voltage prefabricated switchgear and controlgear assemblies. Part 206. Voltage presence indicating systems
09/30206024 DC 09/30206024 DC. BS EN 61199. Single-capped fluorescent lamps. Safety specifications
09/30206090 DC 09/30206090 DC. BS EN 62496-4. Optical circuit boards. Interface standards. Part 4. General and guidance
09/30206094 DC 09/30206094 DC. BS EN 62496-3. Optical circuit boards. Part 3. Performance standards. General and guidance
09/30206120 DC 09/30206120 DC. BS EN 60061-1 AMD44. Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1. Lamp caps
09/30206144 DC 09/30206144 DC. BS EN 60335-2-76 AMD1. Household and similar electrical appliances. Safety. Part 2-76. Particular requirements for electric fence energizers
09/30206172 DC 09/30206172 DC. BS EN 60695-7-3. Fire hazard testing. Part 7-3. Toxicity of fire effluent. Use and interpretation of test results
09/30206176 DC 09/30206176 DC. BS EN 62137-3. Electronics assembly technology. Selection guidance of environmental and endurance test methods for solder joints
09/30206195 DC 09/30206195 DC. BS EN ISO 9311-2. Adhesives for thermoplastic piping systems. Part 2. Determination of shear strength
09/30206253 DC 09/30206253 DC. BS EN ISO 14372. Welding consumables. Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
09/30206282 DC 09/30206282 DC. BS EN 62561-5. Requirements for Lightning Protection System Components (LPSC). Part 5. Requirements for earth electrode inspection housings and earth electrode seals
09/30206286 DC 09/30206286 DC. BS EN 62561-6. Requirements for Lightning Protection System Components (LPSC). Part 6. Requirements for lightning strike counters
09/30206291 DC 09/30206291 DC. BS EN 62549. Articulated systems for cable guiding
BS 7121-13:2009 BS 7121-13:2009. Code of practice for safe use of cranes. Hydraulic gantry lifting systems
09/30206303 DC 09/30206303 DC. BS EN 60335-2-40 AMD1. Household and similar electrical appliances. Safety. Part 2-40. Particular requirements for electrical heat pumps, air-conditioners and dehumidifi
09/30206315 DC 09/30206315 DC. BS EN 62639. Fluorescent induction lamps. Performance specification
BS EN ISO 22088-6:2009 BS EN ISO 22088-6:2009. Plastics. Determination of resistance to environmental stress cracking (ESC). Slow strain rate method
09/30206330 DC 09/30206330 DC. BS EN 61803 AMD1. Determination of power losses in high-voltage direct current (HVDC) converter stations
09/30206340 DC 09/30206340 DC. BS EN 14511-1. Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Part 1. Terms and definition
09/30206343 DC 09/30206343 DC. BS EN 14511-2. Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Part 2. Test conditions
09/30206346 DC 09/30206346 DC. BS EN 14511-3. Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Part 3. Test methods
09/30206349 DC 09/30206349 DC. BS EN 14511-4. Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Part 4. Requirements
09/30206358 DC 09/30206358 DC. BS EN 1870-4. Safety of woodworking machines. Circular sawing machines. Part 4. Multi-blade rip sawing machines with manual loading and/or unloading
09/30206385 DC 09/30206385 DC. BS EN 13759. Furniture. Operating mechanisms for seating and sofa-beds. Test methods
09/30206527 DC 09/30206527 DC. BS EN 60079-0. Explosive atmospheres. Part 0. Equipment. General requirements
09/30206575 DC 09/30206575 DC. BS ISO 12153. Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys. Classification
09/30206605 DC 09/30206605 DC. BS EN 60695-2-10. Fire hazard testing. Part 2-10. Glowing/hot-wire based test methods. Glow-wire apparatus and common test procedure
09/30206609 DC 09/30206609 DC. BS EN 60695-11-10. Fire hazard testing. Part 11-10. Test flames. 50 W horizontal and vertical flame test methods
09/30206613 DC 09/30206613 DC. BS EN 60695-11-20. Fire hazard testing. Part 11-20. Test flames. 500 W flame test methods
09/30206653 DC 09/30206653 DC. BS EN 61591 AMD2. Household range hoods. Methods for measuring performance
09/30206692 DC 09/30206692 DC. BS EN 228. Automotive fuels. Unleaded petrol. Requirements and test methods
09/30206695 DC 09/30206695 DC. BS EN 15376. Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods
09/30206726 DC 09/30206726 DC. BS EN 12464-1. Light and lighting. Lighting of work places. Part 1. Indoor work places
09/30206741 DC 09/30206741 DC. BS EN 15997. All terrain vehicles. Safety requirements and test methods
09/30206804 DC 09/30206804 DC. BS EN 60335-1 AMD1. Household and similar electrical appliances. Safety. Part 1. General requirements
BS EN ISO 22794:2009 BS EN ISO 22794:2009. Dentistry. Implantable materials for bone filling and augmentation in oral and maxillofacial surgery. Contents of a technical file
09/30206879 DC 09/30206879 DC. BS EN 2997-001. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 °C to 175
09/30206880 DC 09/30206880 DC. BS EN 2997-002. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 °C to 175
09/30206914 DC 09/30206914 DC. BS EN 2596. Aerospace series. Washers, lock, with radial serrations in corrosion resisting steel, cadmium plated for flight control rods. Dimensions
09/30206916 DC 09/30206916 DC. BS EN 2546. Aerospace series. Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods. Dimensions
09/30206919 DC 09/30206919 DC. BS EN 3745-301. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Part 301. Attenuation
09/30206920 DC 09/30206920 DC. BS EN 3745-405. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Part 405. Cable, fiber optic, low/high temperature bend test
09/30206921 DC 09/30206921 DC. BS EN 3745-510. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Part 510. Bending test
09/30206924 DC 09/30206924 DC. BS EN 60118-15. Electroacoustics. Part 15. Hearing aids. Methods for characterising signal processing in hearing aids
09/30206928 DC 09/30206928 DC. BS EN 60695-11-3 AMD1. Fire hazard testing. Part 11-3. Test flames. 500 W flames. Apparatus and confirmational test methods
09/30206932 DC 09/30206932 DC. BS EN 60695-11-4 AMD1. Fire hazard testing. Part 11-4. Test flames. 50 W. Apparatus and confirmatory test method
09/30206973 DC 09/30206973 DC. BS ISO 8217. Petroleum products. Fuels (class F). Specifications of marine fuels
09/30206976 DC 09/30206976 DC. BS ISO 8216-1. Petroleum products. Fuels (class F) classification. Part 1. Categories of marine fuels
09/30206982 DC 09/30206982 DC. BS EN 9137. Quality Management Systems. Guidance for the Application of AQAP 2110 within an 9100:2009 Quality Management System
09/30207007 DC 09/30207007 DC. BS EN 60335-2-3 AMD. Household and similar electrical appliances. Safety. Part 2-3. Particular requirements for electric irons
09/30207010 DC 09/30207010 DC. BS EN 60335-2-6 AMD. Household and similar electrical appliances. Safety. Part 2-6. Particular requirements for stationary cooking ranges, hobs, ovens and similar applia
09/30207013 DC 09/30207013 DC. BS EN 60335-2-7 AMD. Household and similar electrical appliances. Safety. Part 2-7. Particular requirements for washing machines
09/30207016 DC 09/30207016 DC. BS EN 60335-2-75 AMD. Household and similar electrical appliances. Safety. Part 2-75. Particular requirements for commercial dispensing appliances and vending machines
09/30207079 DC 09/30207079 DC. BS EN 60335-2-52 AMD. Household and similar electrical appliances. Safety. Part 2-52. Particular requirements for oral hygiene appliances
09/30207082 DC 09/30207082 DC. BS EN 50383 AMD. Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixe
09/30207086 DC 09/30207086 DC. BS EN 60335-2-23 AMD. Household and similar electrical appliances. Safety. Part 2-23. Particular requirements for appliances for skin or hair care
09/30207089 DC 09/30207089 DC. BS EN 60335-2-2 AMD. Household and similar electrical appliances. Safety. Part 2-2. Particular requirements for vacuum cleaners and water-suction cleaning appliances
09/30207158 DC 09/30207158 DC. BS EN 62642-1. Alarm systems. Intrusion and hold-up systems. Part 1. System requirements
09/30207175 DC 09/30207175 DC. BS EN 62276. Single crystal wafers for surface acoustic wave (SAW) device applications. Specifications and measuring method
09/30207299 DC 09/30207299 DC. BS EN 60252-2. AC motor capacitors. Part 2. Motor start capacitors
09/30207307 DC 09/30207307 DC. BS EN 60115-2. Fixed resistors for use in electronic equipment. Part 2. Sectional specification. Leaded fixed low power film resistors
BS EN 50342-4:2009 BS EN 50342-4:2009. Lead-acid starter batteries. Dimensions of batteries for heavy vehicles
09/30207352 DC 09/30207352 DC. BS EN 62149-4. Fibre optic active components and devices. Performance standards. Part 4. 1300 nm fibre optic transceivers for Gigabit Ethernet application
09/30207401 DC 09/30207401 DC. BS ISO 13007-1. Ceramic tiles. Grouts and adhesives. Part 1. Definitions and specifications for adhesives
09/30207404 DC 09/30207404 DC. BS ISO 13007-2. Ceramic Tiles. Grouts and adhesives. Part 2. Test methods for adhesives
09/30207407 DC 09/30207407 DC. BS ISO 13007-3. Ceramic tiles. Grouts and adhesives. Part 3. Definitions and specifications for grouts
09/30207410 DC 09/30207410 DC. BS ISO 13007-4. Ceramic Tiles. Grouts and adhesives. Part 4. Test methods for grouts
09/30207413 DC 09/30207413 DC. BS EN 61755-3-6 AMD1. Fibre optic connector optical interfaces. Part 3-6. Optical interface. 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrul
09/30207531 DC 09/30207531 DC. BS EN ISO 14534. Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements
09/30207606 DC 09/30207606 DC. BS EN 61148. Terminal markings for valve device stacks and assemblies and for power converter equipment
09/30207691 DC 09/30207691 DC. BS ISO/IEC 19761. Software engineering. COSMIC. A functional size measurement method
09/30207781 DC 09/30207781 DC. BS EN 62560. Self-ballasted LED-lamps for general lighting services by voltage $0G 50 V. Safety specifications
ISO/IEC18026 : 2009 (CD-ROM) HEADER ISO/IEC18026 : 2009 (CD-ROM) HEADER. ISO/IEC 18026 Information technology Spatial Reference Model (SRM)
09/30207944 DC 09/30207944 DC. BS EN 2133. Aerospace series. Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys
09/30207945 DC 09/30207945 DC. BS EN 3310. Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Not heat treated. Forging stock, for annealed forgings. a or D ≤ 360 mm
09/30207946 DC 09/30207946 DC. BS EN 3312. Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Forgings. De ≤ 150 mm
BS EN ISO 23606:2009 BS EN ISO 23606:2009. Textiles. Knitted fabrics. Representation and pattern design
09/30208058 DC 09/30208058 DC. BS EN 60749-19 AMD1. Semiconductor devices. Mechanical and climatic test methods. Part 19. Die shear strength
09/30208070 DC 09/30208070 DC. BS EN 60749-30 AMD1. Semiconductor devices. Mechanical and climatic test methods. Part 30. Preconditioning of non-hermetic surface mount devices prior to reliability tes
09/30208075 DC 09/30208075 DC. BS EN 55016-1-5 AMD1. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-5. Radio disturbance and immunity measuring apparatus. Ant
09/30208079 DC 09/30208079 DC. BS EN 60749-7. Semiconductor devices. Mechanical and climatic test methods. Part 7. Internal moisture content measurement and the analysis of other residual gases
09/30208089 DC 09/30208089 DC. BS EN 60749-23 AMD1. Semiconductor devices. Mechanical and climatic test methods. Part 23. High temperature operating life
09/30208094 DC 09/30208094 DC. BS EN 60749-32 AMD1. Semiconductor devices. Mechanical and climatic test methods. Part 32. Flammability of plastic-encapsulated devices (externally induced)
09/30208131 DC 09/30208131 DC. BS EN 3354. Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Sheet for superplastic forming. a ≤ 6 mm
09/30208165 DC 09/30208165 DC. BS EN 3355. Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Extruded section. De ≤ 150 mm. 900 MPa ≤ Rm ≤ 1160 MPa
09/30208211 DC 09/30208211 DC. BS ISO 10033-2. Laminated veneer lumber. Bonding quality. Part 2. Requirements
09/30208223 DC 09/30208223 DC. BS EN 4801. Aerospace series. Flange couplings. Swivel flange with 3 fastening holes, in heat resisting steel. Inch series
09/30208256 DC 09/30208256 DC. BS EN 4802. Aerospace series. Flange couplings. Swivel flange with 3 fastening holes, in nickel alloy. Inch series
09/30208258 DC 09/30208258 DC. BS EN 4803. Aerospace series. Flange couplings. Swivel flange with 4 fastening holes, in heat resisting steel. Inch series
09/30208260 DC 09/30208260 DC. BS EN 4804. Aerospace series. Flange couplings. Swivel flange with 4 fastening holes, in nickel alloy. Inch series
09/30208266 DC 09/30208266 DC. BS EN 4805. Aerospace series. Flange couplings. Weld coupling, straight, in heat resisting steel. Inch series
09/30208267 DC 09/30208267 DC. BS EN 4806. Aerospace series. Flange couplings. Weld coupling, Straight, in nickel alloy. Inch series
09/30208268 DC 09/30208268 DC. BS EN 4807. Aerospace series. Flange couplings. Weld coupling, 90° elbow, in heat resisting steel. Inch series
09/30208270 DC 09/30208270 DC. BS EN 4808. Aerospace series. Flange couplings. Weld coupling, 90° elbow, in nickel alloy. Inch series
09/30208273 DC 09/30208273 DC. BS EN 4809. Aerospace series. Flange couplings. Gasket seal with fluorocarbon seal on aluminium plate with 3 fastening holes. Inch series
09/30208346 DC 09/30208346 DC. BS EN 4810. Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal on heat resisting steel plate with 3 fastening holes. Inch series
09/30208350 DC 09/30208350 DC. BS EN 4811. Aerospace series. Flange couplings. Gasket seal with fluorocarbon seal on aluminium plate with 4 fastening holes. Inch series
09/30208355 DC 09/30208355 DC. BS EN 4812. Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes. Inch series
09/30208358 DC 09/30208358 DC. BS EN 4813. Aerospace series. Flange couplings cap, in heat resisting steel. Inch series
09/30208359 DC 09/30208359 DC. BS EN 4814. Aerospace series. Flange couplings up to 21 000 kPa. Technical specification. Inch series
09/30208363 DC 09/30208363 DC. BS EN 4816. Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal. Technical specification. Inch series
BS EN 4199-003:2009 BS EN 4199-003:2009. Aerospace series. Bonding straps for aircraft. Bonding strap assemblies with flat braided conductor copper, tin plated -65°C up to 150°C and copper, nickel pla
09/30208365 DC 09/30208365 DC. BS ISO 9328-3 AMD1. Steel flat products for pressure purposes. Technical delivery conditions. Part 3. Weldable fine grain steels, normalized
09/30208367 DC 09/30208367 DC. BS ISO 9328-4 AMD1. Steel flat products for pressure purposes. Technical delivery conditions. Part 4. Nickel-alloy steels with specified low temperature propertie
09/30208369 DC 09/30208369 DC. BS ISO 9328-5 AMD1. Steel flat products for pressure purposes. Technical delivery conditions. Part 5. Weldable fine grain steels, thermomechanically rolled
09/30208371 DC 09/30208371 DC. BS ISO 9328-6 AMD1. Steel flat products for pressure purposes. Technical delivery conditions. Part 6. Weldable fine grain steels, quenched and tempered
09/30208393 DC 09/30208393 DC. BS EN 61000-4-18 AMD1. Electromagnetic compatibility (EMC). Part 4-18. Testing and measurement techniques. Oscillatory wave immunity test. Basic EMC publication
09/30208401 DC 09/30208401 DC. BS EN 60598-2-2. Luminaires. Part 2-2. Particular requirements. Recessed luminaires
09/30208429 DC 09/30208429 DC. BS EN 50467. Railway applications. Rolling stock. Electrical connectors, requirements and test methods
PD ISO/TS 16949:2009 PD ISO/TS 16949:2009. Quality management systems. Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
09/30208577 DC 09/30208577 DC. BS EN 61196-1-119. Coaxial communication cables. Part 1-119. RF Power Rating
09/30208581 DC 09/30208581 DC. BS EN 61196-1-304. Coaxial communication cables. Part 1-304. Impact resistance
09/30208585 DC 09/30208585 DC. BS EN 61672-1. Electroacoustics. Sound level meters. Part 1. Specifications
09/30208590 DC 09/30208590 DC. BS EN 61672-2. Electroacoustics. Sound level meters. Part 2. Pattern evaluation tests
09/30208595 DC 09/30208595 DC. BS EN 61672-3. Electroacoustics. Sound level meters. Part 3. Periodic tests
09/30208696 DC 09/30208696 DC. BS EN 61189-11. Test methods for electrical materials, interconnection structures and assemblies. Part 11. Measurement of melting temperature and melting temperature ran
09/30208741 DC 09/30208741 DC. BS EN 62109-2. Safety of power converters for use in photovoltaic power systems. Part 2. Particular requirements for inverters
DD IEC/PAS 62633:2009 DD IEC/PAS 62633:2009. Industrial communication networks. Profiles. Additional Fieldbus profiles for real-time networks based on ISO/IEC 8802-3. SNpTYPE
DD IEC/PAS 61784-3-18:2009 DD IEC/PAS 61784-3-18:2009. Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF SNpFAMILY
09/30208762 DC 09/30208762 DC. BS EN 62271-1 AMD1. High-voltage switchgear and controlgear. Part 1. Common specifications
09/30208778 DC 09/30208778 DC. BS EN 50540. Aluminium Conductors Steel Supported (ACSS) for overhead lines
09/30208869 DC 09/30208869 DC. BS EN 15877-1. Railway applications. Marking on railway vehicles. Part 1. Freight wagons
09/30209001 DC 09/30209001 DC. BS EN 50149. Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires
BS EN ISO 14314:2009 BS EN ISO 14314:2009. Reciprocal internal combustion engines. Recoil starting equipment. General safety requirements
BS EN 61646:2008 BS EN 61646:2008. Thin-film terrestrial photovoltaic (PV) modules. Design qualification and type approval
BS EN 2606:2009 BS EN 2606:2009. Aerospace series. 60° interface for adaptors, threaded, with lockring. Geometric configuration
BS EN 12613:2009 BS EN 12613:2009. Plastics warning devices for underground cables and pipelines with visual characteristics
ISO/IEC25437 : 2009 EDTN2 ISO/IEC25437 : 2009 EDTN2. Information technology. Telecommunications and information exchange between systems. WS-Session. Web services for application session services
09/30209278 DC 09/30209278 DC. BS ISO 12646 AMD1. Graphic technology. Displays for colour proofing. Characteristics and viewing conditions
09/30209334 DC 09/30209334 DC. BS EN 60034-2-3. Rotating electrical machines. Part 2-3. Specific test methods for determining losses and efficiency of converter-fed AC motors
09/30209379 DC 09/30209379 DC. BS EN 62031 AMD1. LED modules for general lighting. Safety specifications
09/30209389 DC 09/30209389 DC. BS EN 60115-8-1. Fixed resistors for use in electronic equipment. Part 8-1. Blank detail specification. Fixed chip resistors. Assessment level E
09/30209395 DC 09/30209395 DC. BS EN 60539-2 AMD1. Directly heated negative temperature coefficient thermistors. Part 2. Sectional specification. Surface mount negative temperature coefficient thermis
09/30209670 DC 09/30209670 DC. BS EN 60749-21. Semiconductor devices. Mechanical and climatic test methods. Part 21. Solderability
09/30209746 DC 09/30209746 DC. BS EN 60749-29. Semiconductor devices. Mechanical and climatic test methods. Part 29. Latch-up test
09/30209772 DC 09/30209772 DC. BS EN 60512-26-100 AMD1. Connectors for electronic equipment. Tests and measurements. Part 26-100. Measurement setup, test and reference arrangements and measurements fo
09/30209802 DC 09/30209802 DC. BS EN 2252. Aerospace series. Steel FE-PL1505 (15CrMoV6). 1 080 MPa ≤ Rm ≤ 1 250 MPa. Forgings. De ≤ 100 mm
09/30209876 DC 09/30209876 DC. BS EN ISO 23953-1 AMD1. Refrigerated display cabinets. Part 1. Vocabulary
09/30209882 DC 09/30209882 DC. BS EN ISO 23953-2 AMD1. Refrigerated display cabinets. Part 2. Classification, requirements and test conditions
09/30209889 DC 09/30209889 DC. BS ISO/IEC 23006-1. Information technology. MPEG extensible middleware (MXM). Part 1. MXM architecture and technologies
09/30209891 DC 09/30209891 DC. BS ISO/IEC 23006-2. Information technology. MPEG extensible middleware (MXM). Part 2. MXM API
09/30209893 DC 09/30209893 DC. BS ISO/IEC 23006-3. Information technology. MPEG extensible middleware (MXM). Part 3. MXM conformance and reference software
09/30209895 DC 09/30209895 DC. BS ISO/IEC 23006-4. Information technology. MPEG extensible middleware (MXM). Part 4. MXM protocols
09/30209898 DC 09/30209898 DC. BS EN 3813. Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar and wire for forged fasteners. De ≤ 50 mm
09/30209900 DC 09/30209900 DC. BS EN 3155-035. Aerospace series. Electrical contacts used in elements of connection. Part 035. Contacts, electrical, triaxial, size 08, female, type D, crimp, class R.
09/30209901 DC 09/30209901 DC. BS EN 2267-012. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between ?65 °C and 260 °C. Part 012. XX family, single UV laser printab
09/30209902 DC 09/30209902 DC. BS EN 2267-011. Aerospace series. Cables, electrical, for general purpose. Operating temperatures between ?65 °C and 260 °C. Part 011. XXA family, single and multicore a
09/30209903 DC 09/30209903 DC. BS EN 2714-015. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between ?65 °C and 260 °C. Part 015. XX family, sc
09/30209904 DC 09/30209904 DC. BS EN 3745-517. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Part 517. Cable, fiber optic, cable tie clamping test
09/30209905 DC 09/30209905 DC. BS EN 3745-515. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Part 515. Cable, fiber optic, buffer insertion force
09/30209906 DC 09/30209906 DC. BS EN 3745-516. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Part 516. Severe cable bend test
KIT203 Eur Press Vssls BSEN13445 Pts1-6 KIT203 Eur Press Vssls BSEN13445 Pts1-6. European Pressure Vessels
KIT204 Euro Press Vsl BSEN13445 Pts1-6&8 KIT204 Euro Press Vsl BSEN13445 Pts1-6&8. European Pressure Vessels
09/30209939 DC 09/30209939 DC. BS EN 60749-34. Semiconductor devices. Mechanical and climatic test methods. Part 34. Power cycling
09/30209949 DC 09/30209949 DC. BS EN 60570. Electrical supply track systems for luminaires
09/30209972 DC 09/30209972 DC. BS EN 62005-9-3. Fibre optic interconnecting devices and passive components. Reliability. Part 9-3. Reliability qualification for 1-row multi-fibre rectangular ferrule a
09/30210064 DC 09/30210064 DC. BS EN 4531-001. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Part 001. Technical specification
09/30210065 DC 09/30210065 DC. BS EN 4531-002. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Part 002. Specification of performance an
09/30210066 DC 09/30210066 DC. BS EN 4531-003. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Part 003. Square flange receptacle. Produ
09/30210067 DC 09/30210067 DC. BS EN 4531-004. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Part 004. Jam nut receptacle. Product sta
09/30210068 DC 09/30210068 DC. BS EN 4531-005. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Part 005. Plug. Product standard
09/30210121 DC 09/30210121 DC. BS EN 4531-101. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Part 101. Optical contact for EN 4641-100
09/30210122 DC 09/30210122 DC. BS EN 4531-901. Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Part 901. Square flange receptacle. Produ
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
