BIS Standards Catalogue
BS EN ISO 659:2009 BS EN ISO 659:2009. Oilseeds. Determination of oil content (Reference method)
09/30178433 DC 09/30178433 DC. BS ISO 7301. Rice. Specification
BS EN ISO 19432:2008 BS EN ISO 19432:2008. Building construction machinery and equipment. Portable, hand-held internal combustion engine driven cut-off machines. Safety requirements and testing
ISO6804 : 2009 EDTN3 ISO6804 : 2009 EDTN3. Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers. Specification
BS ISO 702-1:2009 BS ISO 702-1:2009. Machine tools. Connecting dimensions of spindle noses and work holding chucks. Conical connection
DD CEN/TS 15883:2009 DD CEN/TS 15883:2009. Residential solid fuel burning appliances. Emission test methods
09/30178652 DC 09/30178652 DC. BS EN ISO 6892-2. Metallic materials. Tensile testing. Part 2. Method of test at elevated temperature
BS EN 12002:2008 BS EN 12002:2008. Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts
DD IEC/PAS 62545:2008 DD IEC/PAS 62545:2008. Environmental information on electrical and electronic equipment (EIEEE)
BS EN 15037-2:2009 BS EN 15037-2:2009. Precast concrete products. Beam-and-block floor systems. Concrete blocks
BS EN 15037-3:2009 BS EN 15037-3:2009. Precast concrete products. Beam-and-block floor systems. Clay blocks
09/30178938 DC 09/30178938 DC. BS ISO 10244. Document management. Business process baselining and analysis
ISO18435-1 : 2009 EDTN1 ISO18435-1 : 2009 EDTN1. Industrial automation systems and integration. Diagnostics, capability assessment and maintenance applications integration. Part 1: Overview and genera
09/30179065 DC 09/30179065 DC. BS ISO 10965. Textile floor coverings. Determination of electrical resistance
BS 2742:2009 BS 2742:2009. Use of the Ringelmann and miniature smoke charts
09/30179088 DC 09/30179088 DC. BS ISO 26262-1. Road vehicles. Functional safety. Part 1. Vocabulary
09/30179091 DC 09/30179091 DC. BS ISO 26262-2. Road vehicles. Functional safety. Part 2. Management of functional safety
09/30179094 DC 09/30179094 DC. BS ISO 26262-3. Road vehicles. Functional safety. Part 3. Concept phase
09/30179097 DC 09/30179097 DC. BS ISO 26262-4. Road vehicles. Functional safety. Part 4. Product development. System level
09/30179100 DC 09/30179100 DC. BS ISO 26262-5. Road vehicles. Functional Safety. Part 5. Product development. Hardware level
09/30179103 DC 09/30179103 DC. BS ISO 26262-6. Road vehicles. Functional safety. Part 6. Product development. Software level
09/30179106 DC 09/30179106 DC. BS ISO 26262-7. Road vehicles. Functional safety. Part 7. Production and operation
09/30179109 DC 09/30179109 DC. BS ISO 26262-8. Road vehicles. Functional safety. Part 8. Supporting processes
09/30179112 DC 09/30179112 DC. BS ISO 26262-9. Road vehicles. Functional safety.Part 9. ASIL-oriented and safety-oriented analyses
BS ISO 1501:2009 BS ISO 1501:2009. ISO miniature screw threads
BS EN 15559:2009 BS EN 15559:2009. Fertilizers. Determination of nitric and ammoniacal nitrogen according to Arnd
BS EN 15560:2009 BS EN 15560:2009. Fertilizers. Determination of total nitrogen in calcium cyanamide nitrate free
BS EN 15561:2009 BS EN 15561:2009. Fertilizers. Determination of total nitrogen in calcium cyanamide containing nitrates
BS EN 15562:2009 BS EN 15562:2009. Fertilizers. Determination of cyanamide nitrogen
BS EN 15604:2009 BS EN 15604:2009. Fertilizers. Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
BS EN 4626-202:2009 BS EN 4626-202:2009. Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65°C to 125°
BS EN 2854-002:2009 BS EN 2854-002:2009. Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm2. Operating temperatures between -55°C and 260°C. Gener
BS EN 4640-001:2009 BS EN 4640-001:2009. Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Technical spec
BS ISO 22266-1:2009 BS ISO 22266-1:2009. Mechanical vibration. Torsional vibration of rotating machinery. Land-based steam and gas turbine generator sets in excess of 50 MW
09/30179533 DC 09/30179533 DC. BS EN ISO 13679. Petroleum and natural gas industries. Procedures for testing casing and tubing connections
09/30179548 DC 09/30179548 DC. BS ISO 10904. Fibre-cement corrugated sheets and fittings for roofing and cladding
09/30179615 DC 09/30179615 DC. BS ISO 10595. Resilient floor coverings. Semi-flexible/vinyl composition(VCT) poly(vinyl chloride) floor tiles. Specification
09/30179710 DC 09/30179710 DC. BS EN 13035-5 AMD1. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Part 5. Machines and installations for stacking
09/30179731 DC 09/30179731 DC. BS EN 1034-2 AMD1. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Part 2. Barking drums
09/30179734 DC 09/30179734 DC. BS EN 1034-3 AMD1. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Part 3. Winders and slitters, plying
09/30179737 DC 09/30179737 DC. BS EN 1034-4 AMD1. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Part 4. Pulpers and their loading fac
09/30179740 DC 09/30179740 DC. BS EN 1034-5 AMD1. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Part 5. Sheeters
09/30179743 DC 09/30179743 DC. BS EN 1034-6 AMD1. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Part 6. Calender
09/30179746 DC 09/30179746 DC. BS EN 1034-7 AMD1. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Part 7. Chests
09/30179749 DC 09/30179749 DC. BS EN 1034-13 AMD1. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Part 13. Machines for de-wiring bale
09/30179752 DC 09/30179752 DC. BS EN 1034-14 AMD1. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Part 14. Reel splitter
09/30179755 DC 09/30179755 DC. BS EN 1034-22 AMD1. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Part 22. Wood Grinders
09/30179833 DC 09/30179833 DC. BS EN 1010-3 AMD1. Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Part 3. Cutting machines
09/30179836 DC 09/30179836 DC. BS EN 1010-4 AMD1. Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Part 4. Bookbinding, paper convert
09/30179897 DC 09/30179897 DC. BS ISO 15192. Soil quality. Determination of chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
ISO9125 : 2009 EDTN2 ISO9125 : 2009 EDTN2. ISO9125 : 2009 Fibre-cement slates and fittings - Product specification and test methods
09/30180073 DC 09/30180073 DC. BS ISO 13956. Plastics pipes and fittings. Determination of cohesive resistance. Tear test for polyethylene (PE) saddle assemblies
09/30180076 DC 09/30180076 DC. BS ISO 21751. Plastics pipes and fittings. Determination of cohesive resistance. Strip-bend test for electrofusion assemblies
BS EN 61770:2009 BS EN 61770:2009. Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets
BS ISO 6814:2009 BS ISO 6814:2009. Machinery for forestry. Mobile and self-propelled machinery. Terms, definitions and classification
BS EN 10244-1:2009 BS EN 10244-1:2009. Steel wire and wire products. Non-ferrous metallic coatings on steel wire. General principles
BS EN 10244-2:2009 BS EN 10244-2:2009. Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings
BS EN 50411-2-8:2009 BS EN 50411-2-8:2009. Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Microduct connectors, for air blown optical fibres,
BS ISO 5408:2009 BS ISO 5408:2009. Screw threads. Vocabulary
BS ISO 11107:2009 BS ISO 11107:2009. Recreational diving services. Requirements for training programmes on enriched air nitrox (EAN) diving
BS ISO 11121:2009 BS ISO 11121:2009. Recreational diving services. Requirements for introductory training programmes to scuba diving
BS EN 934-2:2009 BS EN 934-2:2009. Admixtures for concrete, mortar and grout. Concrete admixtures. Definitions, requirements, conformity, marking and labelling
BS EN 934-4:2009 BS EN 934-4:2009. Admixtures for concrete, mortar and grout. Admixtures for grout for prestressing tendons. Definitions, requirements, conformity, marking and labelling
DD CEN/TS 1992-4-1:2009 DD CEN/TS 1992-4-1:2009. Design of fastenings for use in concrete. General
DD CEN/TS 1992-4-2:2009 DD CEN/TS 1992-4-2:2009. Design of fastenings for use in concrete. Headed fasteners
DD CEN/TS 1992-4-3:2009 DD CEN/TS 1992-4-3:2009. Design of fastenings for use in concrete. Anchor channels
DD CEN/TS 1992-4-4:2009 DD CEN/TS 1992-4-4:2009. Design of fastenings for use in concrete. Post-installed fasteners. Mechanical systems
DD CEN/TS 1992-4-5:2009 DD CEN/TS 1992-4-5:2009. Design of fastenings for use in concrete. Post-installed fasteners. Chemical systems
BIP 2155 BIP 2155. The Essential Guide to Technical Product Specification: Engineering Drawing
BS 8517-1:2009 BS 8517-1:2009. Security dogs. Code of practice for the use of general purpose security dogs
09/30180585 DC 09/30180585 DC. BS ISO/IEC 24723. Information technology. Automatic identification and data capture techniques. EAN.UCC Composite bar code symbology specification
BS 8507-2:2009 BS 8507-2:2009. Code of practice for close protection services. Services outside the United Kingdom
ISO/IEC12139-1 : 2009 EDTN1 ISO/IEC12139-1 : 2009 EDTN1. ISO/IEC 12139-1 Information technology - Telecommunications and information exchange between systems - Powerline communication (PLC) - High spe
BS EN ISO 660:2009 BS EN ISO 660:2009. Animal and vegetable fats and oils. Determination of acid value and acidity
BS ISO 13772:2009 BS ISO 13772:2009. Forestry machinery. Portable chain-saws. Non-manually actuated chain brake performance
BS ISO 7770:2009 BS ISO 7770:2009. Textiles. Test method for assessing the smoothness appearance of seams in fabrics after cleansing
BS ISO 9682-1:2009 BS ISO 9682-1:2009. Iron ores. Determination of manganese content. Flame atomic absorption spectrometric method
BS ISO 9683-2:2009 BS ISO 9683-2:2009. Iron ores. Determination of vanadium content. Flame atomic absorption spectrometric methods
BS ISO 11533:2009 BS ISO 11533:2009. Iron ores. Determination of cobalt. Flame atomic absorption spectrometric method
09/30180832 DC 09/30180832 DC. BS EN 13675 AMD1. Safety of machinery. Safety requirements for tube forming and rolling mills and finishing line equipment
09/30180865 DC 09/30180865 DC. BS ISO 4209-2. Truck and bus tyres and rims (metric series). Part 2. Rims
09/30180884 DC 09/30180884 DC. BS EN 50128. Railway applications. Communication, signalling and processing systems. Software for railway control and protection systems
09/30181245 DC 09/30181245 DC. BS ISO 3039. Corrugated fibreboard. Determination of the grammage of the component papers after separation
09/30181290 DC 09/30181290 DC. BS 7654. Specification for single-phase street lighting cut-out assemblies for low-voltage public electricity distribution systems. 25 A rating for highway power supplie
09/30181298 DC 09/30181298 DC. BS 7657. Specification for cut-out assemblies up to 100 A rating, for power supply to buildings
09/30181336 DC 09/30181336 DC. BS ISO 22197-2. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials.
09/30181339 DC 09/30181339 DC. BS ISO 22197-3. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials.
BS IEC 60747-14-3:2009 BS IEC 60747-14-3:2009. Semiconductor devices. Semiconductor sensors. Pressure sensors
BS EN ISO 15747:2005 BS EN ISO 15747:2005. Plastic containers for intravenous injection
09/30181563 DC 09/30181563 DC. BS ISO 22762-1. Elastomeric seismic-protection isolators. Part 1. Test methods
09/30181664 DC 09/30181664 DC. BS EN 13035-4 AMD1. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Part 4. Tilting tables
09/30181667 DC 09/30181667 DC. BS EN 13035-6 AMD1. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Part 6. Machines for break-out
09/30181670 DC 09/30181670 DC. BS EN 13035-7 AMD1. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Part 7. Cutting machines for laminated glass
09/30181673 DC 09/30181673 DC. BS EN 13035-9 AMD1. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Part 9. Washing installations
09/30181676 DC 09/30181676 DC. BS EN 13035-11 AMD1. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Part 11. Drilling machines
09/30181956 DC 09/30181956 DC. BS EN ISO 80601-2-61. Medical electrical equipment. Part 2-61 Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medi
BS EN 61076-3-117:2009 BS EN 61076-3-117:2009. Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for protective housings for use with 8-way shield
09/30182052 DC 09/30182052 DC. BS EN 60601-2-8. Medical electrical equipment. Part 2-8. Particular requirements for basic safety and essential performance of therapeutic X-ray equipment operating in t
BS 3165:2009 BS 3165:2009. Rubber suction hose and hose assemblies with semi-embedded wire helix for fire-fighting purposes. Requirements and test methods
09/30182064 DC 09/30182064 DC. BS ISO 22762-2. Elastomeric seismic-protection isolators. Part 2. Applications for bridges. Specifications
09/30182101 DC 09/30182101 DC. BS EN 60349-1. Electrical traction. Rotating electrical machines for rail and road vehicles. Part 1. Machines other than electronic convertor-fed alternating current mot
09/30182105 DC 09/30182105 DC. BS EN 60349-2. Electric traction. Rotating electrical machines for rail and road vehicles. Part 2. Electronic converter-fed alternating current motors
09/30182200 DC 09/30182200 DC. BS EN 500-1 AMD1. Mobile road construction machinery. Safety. Part 1. Common requirements
09/30182215 DC 09/30182215 DC. BS EN 12001 AMD1. Conveying, spraying and placing machines for concrete and mortar. Safety requirements
09/30182302 DC 09/30182302 DC. BS EN 1034-1. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Part 1. Common requirements
BS EN 2206:2008 BS EN 2206:2008. Aerospace series. Steel FE-PL1502 (25CrMo4). 650 MPa ≤ Rm ≤ 850 MPa. Bars. De ≤ 150 mm
BS EN 2438:2008 BS EN 2438:2008. Aerospace series. Steel FE-PL2102 (35NiCr6). 900 MPa ≤ Rm ≤ 1100 MPa. Bars. De ≤ 40 mm
BS EN 2439:2009 BS EN 2439:2009. Aerospace series. Steel FE-PL2102 (34NiCr6). 900 MPa ≤ Rm ≤ 1100 MPa. Forgings. De ≤ 40 mm
BS EN 2446:2008 BS EN 2446:2008. Aerospace series. Steel FE-PL1503 (35CrMo4). 1100 MPa ≤ Rm ≤ 1300 MPa. Bars. De ≤ 25 mm
BS EN 2448:2008 BS EN 2448:2008. Aerospace series. Steel FE-PL1503 (35CrMo4). 900 MPa ≤ Rm ≤ 1100 MPa. Bars. De ≤ 40 mm
BS EN 2460:2009 BS EN 2460:2009. Aerospace series. Steel FE-PM1901 (X12CrNi13). 600 MPa ≤ Rm ≤ 800 MPa. Bars. De ≤ 70 mm
BS EN 2461:2009 BS EN 2461:2009. Aerospace series. Steel FE-PM1901 (X12CrNi13). 600 MPa ≤ Rm ≤ 800 MPa. Forgings. De ≤ 70 mm
BS EN 2466:2009 BS EN 2466:2009. Aerospace series. Steel FE-PA3901 (X2CrNi19-11). Softened. Forgings. De ≤ 100 mm
09/30182748 DC 09/30182748 DC. BS 5306-0. Fire protection installations and equipment on premises. Part 0. Guide for the selection of installed systems and other fire equipment
BS EN 13753:2009 BS EN 13753:2009. Products used for treatment of water intended for human consumption. Granular activated alumina
BS EN 13752:2009 BS EN 13752:2009. Products used for treatment of water intended for human consumption. Manganese dioxide
BS EN 13754:2009 BS EN 13754:2009. Products used for treatment of water intended for human consumption. Bentonite
BS EN 899:2009 BS EN 899:2009. Chemicals used for treatment of water intended for human consumption. Sulfuric acid
BS EN 12903:2009 BS EN 12903:2009. Products used for the treatment of water intended for human consumption. Powdered activated carbon
BS EN 12907:2009 BS EN 12907:2009. Products used for treatment of water intended for human consumption. Pyrolyzed coal material
BS EN 12915-1:2009 BS EN 12915-1:2009. Products used for the treatment of water intended for human consumption. Granular activated carbon. Virgin granular activated carbon
BS EN 12915-2:2009 BS EN 12915-2:2009. Products used for the treatment of water intended for human consumption. Granular activated carbon. Reactivated granular activated carbon
BS EN 2209:2008 BS EN 2209:2008. Aerospace series. Steel FE-PL1502 (25CrMo4). 900 MPa ≤ Rm ≤ 1100 MPa. Sheets, strips and plates. 0,5 mm ≤ a ≤ 20 mm
09/30182901 DC 09/30182901 DC. BS ISO 26203-2. Metallic materials. Tensile testing method at high strain rates. Part 2. Servo-hydraulic and other test systems
09/30182918 DC 09/30182918 DC. BS ISO 15031-2. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Part 2. Terms, definitions, abbreviations and acro
09/30183034 DC 09/30183034 DC. BS ISO 6469-3. Electrically propelled road vehicles. Safety specifications. Part 3. Protection of persons against electric shock
ISO3949 : 2009 EDTN4 ISO3949 : 2009 EDTN4. Plastics hoses and hose assemblies. Textile-reinforced types for hydraulic applications. Specification
BS IEC 61226:2009 BS IEC 61226:2009. Nuclear power plants. Instrumentation and control important to safety. Classification of instrumentation and control functions
PD IEC/TR 61156-1-2:2009 PD IEC/TR 61156-1-2:2009. Multicore and symmetrical pair/quad cables for digital communications. Electrical transmission characteristics and test methods of symmetrical pair/q
09/30183239 DC 09/30183239 DC. BS EN 62572-3. Fibre optic active components and devices. Reliability standards. Part 3. Laser modules used for telecommunication
09/30183457 DC 09/30183457 DC. BS EN 13020 AMD1. Road surface treatment machines. Safety requirements
09/30183531 DC 09/30183531 DC. BS EN 50518-3. Monitoring and alarm receiving centre. Part 3. Procedures and requirements for operation
BS EN ISO 10472-1:2008 BS EN ISO 10472-1:2008. Safety requirements for industrial laundry machinery. Common requirements
BS EN ISO 10472-2:2008 BS EN ISO 10472-2:2008. Safety requirements for industrial laundry machinery. Washing machines and washer-extractors
09/30184110 DC 09/30184110 DC. BS ISO 16000-25. Indoor air. Part 25. Determination of the emission of semi-volatile organic compounds by building products. Micro-chamber method
09/30184122 DC 09/30184122 DC. BS 8525-1. Greywater systems. Part 1. Code of practice
09/30184127 DC 09/30184127 DC. BS EN 61709. Electronic components. Reliability. Reference conditions for failure rates and stress models for conversion
BS ISO 8139:2009 BS ISO 8139:2009. Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Mounting dimensions of rod-end spherical eyes
BS ISO 8140:2009 BS ISO 8140:2009. Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Mounting dimensions of rod-end clevises
09/30184409 DC 09/30184409 DC. BS ISO 24500. Ergonomics. Accessible design. Auditory signals for consumer products
09/30184412 DC 09/30184412 DC. BS ISO 24501. Ergonomics. Accessible design. Sound pressure levels of auditory signals for consumer products
09/30184446 DC 09/30184446 DC. BS EN ISO 24503. Ergonomics. Accessible design. Using tactile dots and bars on consumer products
09/30184526 DC 09/30184526 DC. BS ISO 4666-3. Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Part 3. Compression flexometer
09/30184697 DC 09/30184697 DC. BS ISO 10678. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of
BS EN ISO 8586-2:2008 BS EN ISO 8586-2:2008. Sensory analysis. General guidance for the selection, training and monitoring of assessors. Expert sensory assessors
BS EN ISO 10472-3:2008 BS EN ISO 10472-3:2008. Safety requirements for industrial laundry machinery. Washing tunnel lines including component machines
09/30184783 DC 09/30184783 DC. BS ISO 10676. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for water purification performance of semiconducting photocatalytic materials b
09/30184926 DC 09/30184926 DC. BS EN 61439-3. Low-voltage switchgear and controlgear assemblies. Part 3. Distribution boards
ISO/IEC15963 : 2009 EDTN2 ISO/IEC15963 : 2009 EDTN2. Information technology. Radio frequency identification for item management. Unique identification for RF tags
BS ISO 10242-2:2008 BS ISO 10242-2:2008. Tools for pressing. Punch holder shanks. Type C
BS ISO 10242-3:2008 BS ISO 10242-3:2008. Tools for pressing. Punch holder shanks. Type D
09/30185156 DC 09/30185156 DC. BS EN 1811. Reference test method for release of nickel from post assemblies which are inserted into pierced parts of the human body and products intended to come into d
09/30185270 DC 09/30185270 DC. BS EN ISO 24502. Ergonomics. Accessible design. Specification of age-related relative luminance in visual signs and displays
09/30185274 DC 09/30185274 DC. BS ISO 15031-6. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Part 6. Diagnostic trouble code definitions
ISO/IEC14165-312 : 2009 EDTN1 ISO/IEC14165-312 : 2009 EDTN1. Information technology. Fibre channel . Part 312:Avionics environment upper layer protocol (FC-AE-1553)
09/30185454 DC 09/30185454 DC. BS ISO 10110-8. Optics and photonics. Preparation of drawings for optical elements and systems. Part 8. Surface texture
BS EN 3389:2009 BS EN 3389:2009. Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy). Classification: 1210 MPa/730°C. Manufacturing method option
BS EN 590:2009 BS EN 590:2009. Automotive fuels. Diesel. Requirements and test methods
BS EN 615:2009 BS EN 615:2009. Fire protection. Fire extinguishing media. Specifications for powders (other than class D powders)
09/30185794 DC 09/30185794 DC. BS EN 10294-2. Hollow bars for machining. Technical delivery conditions. Part 2. Stainless steels and nickel alloys with specified machinability properties
09/30185811 DC 09/30185811 DC. BS EN 15984. Petroleum industry and products. Determination of composition of refinery heating gas and calculation of carbon content and calorific value. Gas chromatogra
09/30185845 DC 09/30185845 DC. BS EN 13126-5. Building hardware. Hardware for windows and balcony doors. Requirements and test methods. Part 5. Devices that restrict the opening of windows
09/30185848 DC 09/30185848 DC. BS EN 13126-19. Building hardware. Requirements and test methods for windows and door height windows. Part 19. Sliding Closing Devices
BS EN 933-10:2009 BS EN 933-10:2009. Tests for geometrical properties of aggregates. Assessment of fines. Grading of filler aggregates (air jet sieving)
BS EN 1097-8:2009 BS EN 1097-8:2009. Tests for mechanical and physical properties of aggregates. Determination of the polished stone value
09/30185891 DC 09/30185891 DC. BS EN 12665. Light and lighting. Basic terms and criteria for specifying lighting requirements
BS EN 820-4:2009 BS EN 820-4:2009. Advanced technical ceramics. Thermomechanical properties of monolithic ceramics. Determination of flexural creep deformation at elevated temperatures
BS EN 623-5:2009 BS EN 623-5:2009. Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of phase volume fraction by evaluation of micrographs
BS EN 820-5:2009 BS EN 820-5:2009. Advanced technical ceramics. Thermomechanical properties of monolithic ceramics. Determination of elastic moduli at elevated temperatures
BS EN 1006:2009 BS EN 1006:2009. Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties
BS EN 1071-9:2009 BS EN 1071-9:2009. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of fracture strain
BS EN 1071-10:2009 BS EN 1071-10:2009. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by cross sectioning
09/30185939 DC 09/30185939 DC. BS EN 12513. Founding. Abrasion resistant cast irons
09/30185942 DC 09/30185942 DC. BS EN 13835. Founding. Austenitic cast irons
09/30185992 DC 09/30185992 DC. BS EN 13674-1. Railway applications. Track. Rail. Part 1. Vignole railway rails 46 kg/m and above
09/30186079 DC 09/30186079 DC. BS EN 12948. Liming materials. Determination of size distribution by dry and wet sieving
09/30186127 DC 09/30186127 DC. BS EN 13508-2 AMD1. Investigation and assessment of drain and sewer systems outside building. Part 2. Visual Inspection Coding System
09/30186157 DC 09/30186157 DC. BS ISO 10677. Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet light source for testing semiconducting photocatalytic materials
DD CEN/TS 15880:2009 DD CEN/TS 15880:2009. Advanced technical ceramics. Ceramic composites. Determination of the fibre/matrix interfacial frictional shear stress at room temperature by a single fibre
DD CEN/TS 15881:2009 DD CEN/TS 15881:2009. Advanced technical ceramics. Ceramic composites. Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests o
PAS 402:2009 PAS 402:2009. Waste resource management. Specification for performance reporting
09/30186350 DC 09/30186350 DC. BS EN 60825-2 AMD2. Safety of optical fibre communication systems (OFCS)
09/30186388 DC 09/30186388 DC. BS ISO/IEC 24800-3. Information technology. JPSearch. Part 3. Query format
09/30186390 DC 09/30186390 DC. BS ISO/IEC 24800-4. Information technology. JPSearch. Part 4. File format for metadata embedded in image data (JPEG and JPEG 2000)
BS EN 13941:2009 BS EN 13941:2009. Design and installation of preinsulated bonded pipe systems for district heating
BS EN 573-3:2009 BS EN 573-3:2009. Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
BS EN 933-11:2009 BS EN 933-11:2009. Tests for geometrical properties of aggregates. Classification test for the constituents of coarse recycled aggregate
BS EN 15870:2009 BS EN 15870:2009. Adhesives. Determination of tensile strength of butt joints
BS EN 15865:2009 BS EN 15865:2009. Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners
09/30186472 DC 09/30186472 DC. BS EN 13023 AMD1. Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment. Accuracy grades 2 and 3
BS 8522:2009 BS 8522:2009. Furniture removal activities. Commercial moving services
BS EN 140401:2009 BS EN 140401:2009. Blank Detail Specification. Fixed low power film surface mount (SMD) resistors
09/30186922 DC 09/30186922 DC. BS EN ISO 13585. Brazing. Brazer qualification
BS EN 50523-1:2009 BS EN 50523-1:2009. Household appliances interworking. Functional specification
BS EN 50523-2:2009 BS EN 50523-2:2009. Household appliances interworking. Data structures
BS EN 13888:2009 BS EN 13888:2009. Grout for tiles. Requirements, evaluation of conformity, classification and designation
BS EN 13226:2009 BS EN 13226:2009. Wood flooring. Solid parquet elements with grooves and/or tongues
BS EN 12847:2009, BS 2000-485:2009 BS EN 12847:2009, BS 2000-485:2009. Bitumen and bituminous binders. Determination of settling tendency of bituminous emulsions
BS EN 13075-2:2009, BS 2000-495:2009 BS EN 13075-2:2009, BS 2000-495:2009. Bitumen and bituminous binders. Determination of breaking behaviour. Determination of fines mixing time of cationic bitumen e
BS EN 12591:2009 BS EN 12591:2009. Bitumen and bituminous binders. Specifications for paving grade bitumens
DD IEC/TS 62564-1:2009 DD IEC/TS 62564-1:2009. Aerospace qualified electronic component (AQEC). Microcircuits
09/30187488 DC 09/30187488 DC. BS EN 60076-16. Power transformers. Part 16. Transformers for wind turbines application
BS EN 14121:2009 BS EN 14121:2009. Aluminium and aluminium alloys. Sheet, strip and plate for electrotechnical applications
09/30187535 DC 09/30187535 DC. BS EN 13000. Cranes. Mobile cranes
09/30187538 DC 09/30187538 DC. BS EN 15979. Testing of ceramic raw and basic materials. Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc
09/30187541 DC 09/30187541 DC. BS EN 15991. Testing of ceramic and basic materials. Direct determination of mass fractions of impurities in powders and granules of nonoxidic ceramic raw and basic mate
BS EN 10028-2:2009 BS EN 10028-2:2009. Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties
BS EN 10028-3:2009 BS EN 10028-3:2009. Flat products made of steels for pressure purposes. Weldable fine grain steels, normalized
BS EN 10028-4:2009 BS EN 10028-4:2009. Flat products made of steels for pressure purposes. Nickel alloy steels with specified low temperature properties
BS EN 10028-5:2009 BS EN 10028-5:2009. Flat products made of steels for pressure purposes. Weldable fine grain steels, thermomechanically rolled
BS EN 10028-6:2009 BS EN 10028-6:2009. Flat products made of steels for pressure purposes. Weldable fine grain steels, quenched and tempered
BS EN ISO 24373:2009 BS EN ISO 24373:2009. Welding consumables. Solid wires and rods for fusion welding of copper and copper alloys. Classification
BS EN ISO 26304:2009 BS EN ISO 26304:2009. Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels. Class
09/30187580 DC 09/30187580 DC. BS EN ISO 10863. Welding. Use of time-of-flight diffraction technique (TOFD) for testing of welds
PD CLC/TR 50481:2009 PD CLC/TR 50481:2009. Recommendations on filters for shielded enclosures
ISO/IEC15459-8 : 2009 EDTN1 ISO/IEC15459-8 : 2009 EDTN1. Information technology. Unique Identifiers. Part 8: Grouping of transport units
ISO/IEC18000-7 : 2009 EDTN3 ISO/IEC18000-7 : 2009 EDTN3. Information technology. Radio frequency identification for item management. Parameters for active air interface communications at 433 MHz
09/30187671 DC 09/30187671 DC. BS EN ISO 7599. Anodizing of aluminium and its alloys. General specifications for anodic oxidation coatings on aluminium
ISO/IEC26925 : 2009 EDTN2 ISO/IEC26925 : 2009 EDTN2. ISO/IEC 26925 Information technology Data interchange on 120 mm and 80 mm optical disk using +RW HS format Capacity: 4,7 Gbytes and 1,46 Gbytes per
ISO/IEC12862 : 2009 EDTN1 ISO/IEC12862 : 2009 EDTN1. ISO/IEC 12862. Information technology. 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for
ISO/IEC17344 : 2009 EDTN4 ISO/IEC17344 : 2009 EDTN4. ISO/IEC 17344 Information technology Data interchange on 120 mm and 80 mm optical disk using +R format Capacity: 4,7 Gbytes and 1,46 Gbytes per sid
ISO/IEC17341 : 2009 EDTN4 ISO/IEC17341 : 2009 EDTN4. ISO/IEC 17341 Information technology. Data interchange on 120 mm and 80 mm optical disk using +RW format. Capacity: 4,7 Gbytes and 1,46 Gbytes per
ISO/IEC29642 : 2009 EDTN2 ISO/IEC29642 : 2009 EDTN2. ISO/IEC 29642 Information technology Data interchange on 120 mm and 80 mm optical disk using +RW DL format Capacity: 8,55 Gbytes and 2,66 Gbytes pe
09/30187760 DC 09/30187760 DC. BS EN 1562. Founding. Malleable cast irons
BS EN 14133:2009 BS EN 14133:2009. Foodstuffs. Determination of ochratoxin A in wine and beer. HPLC method with immunoaffinity column clean-up
BS EN 14132:2009 BS EN 14132:2009. Foodstuffs. Determination of ochratoxin A in barley and roasted coffee. HPLC method with immunoaffinity column clean-up
09/30187923 DC 09/30187923 DC. BS ISO 10668. Brand valuation. Basic requirements for methods of monetary brand valuation
09/30188083 DC 09/30188083 DC. BS ISO 12251. Diesel engines. Clamp-mounted common-rail fuel injectors. Mounting dimensions
DD IEC/PAS 60539-1-1:2008 DD IEC/PAS 60539-1-1:2008. Directly heated negative temperature coefficient thermistors. Blank detail specification. Sensing application. Assessment level EZ
09/30188300 DC 09/30188300 DC. BS ISO 24343-3. Resilient and laminate floor coverings. Determination of indentation and residual indentation. Part 3. Resilient semi-flexible/vinyl composition tiles. I
BS ISO 10935:2009 BS ISO 10935:2009. Microscopes. Interfacing connection type C
09/30188337 DC 09/30188337 DC. BS ISO 15031-5. Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Part 5. Emissions-related diagnostic services
BS EN 14081-4:2009 BS EN 14081-4:2009. Timber structures. Strength graded structural timber with rectangular cross section. Machine grading. Grading machine settings for machine controlled systems
09/30188385 DC 09/30188385 DC. BS EN 15269-2. Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements o
09/30188568 DC 09/30188568 DC. BS ISO 22762-3. Elastomeric seismic-protection isolators. Part 3. Applications for buildings. Specifications
09/30188869 DC 09/30188869 DC. BS ISO 6312. Road vehicles. Brake linings. Shear test procedure for disc brake pad and drum brake shoe assemblies
BS EN 2543:2009 BS EN 2543:2009. Aerospace series. Steel FE-PL1502 (25CrMo4). Annealed. Sheet and strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts
BS EN 3329:2009 BS EN 3329:2009. Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed. Sheet and Strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts
BS EN 3330:2009 BS EN 3330:2009. Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed. Bar and wire. De ≤ 40 mm. For prevailing torque nuts
09/30189104 DC 09/30189104 DC. BS ISO 9554. Fibre ropes. General specifications
09/30189108 DC 09/30189108 DC. BS EN ISO 2307. Fibre ropes. Determination of certain physical and mechanical properties
BS IEC 61588:2008 BS IEC 61588:2008. Precision clock synchronization protocol for networked measurement and control systems
09/30189298 DC 09/30189298 DC. BS EN ISO 19110 AMD1. Geographic information. Methodology for feature cataloguing
BS EN 12808-4:2009 BS EN 12808-4:2009. Grouts for tiles. Determination of shrinkage
BS EN 14618:2009 BS EN 14618:2009. Agglomerated stone. Terminology and classification
BS EN 50411-2-5:2009 BS EN 50411-2-5:2009. Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed closures for air blown fibre microduct, type
09/30189801 DC 09/30189801 DC. BS 8524-1. Active fire curtain barrier assemblies. Part 1. Specification
ISO18286 : 2008 EDTN2 ISO18286 : 2008 EDTN2. ISO 18286 Hot-rolled stainless steel plates Tolerances on dimensions and shape
09/30189868 DC 09/30189868 DC. BS ISO 22901-2. Road vehicles. Open diagnostic data exchange (ODX). Part 2. Emissions-related diagnostic data
09/30189953 DC 09/30189953 DC. BS 8520-1. Equipment used in the controlled removal of asbestos-containing materials. Part 1. Controlled wetting equipment. Specification
09/30189955 DC 09/30189955 DC. BS 8520-2. Equipment used in the controlled removal of asbestos-containing materials. Part 2. Negative pressure units. Specification
09/30189957 DC 09/30189957 DC. BS 8520-3. Equipment used in the controlled removal of asbestos-containing materials. Part 3. Operation, cleaning and maintenance of class H vacuum cleaners. Code of pra
BS EN 15254-2:2009 BS EN 15254-2:2009. Extended application of results from fire resistance tests. Nonloadbearing walls. Masonry and gypsum blocks
BS EN 13743:2009 BS EN 13743:2009. Safety requirements for coated abrasive products
PD CEN/TR 14383-7:2009 PD CEN/TR 14383-7:2009. Prevention of crime. Urban planning and building design. Design and management of public transport facilities
BS ISO 725:2009 BS ISO 725:2009. ISO inch screw threads. Basic dimensions
BS EN ISO 23811:2009 BS EN ISO 23811:2009. Paints and varnishes. Determination of percentage volume of non-volatile matter by measuring the nonvolatile matter content and the density of the coating ma
09/30190250 DC 09/30190250 DC. BS ISO 18651-1. Building construction machinery and equipment. Internal vibrators for concrete. Part 1. Terminology and commercial specifications
PD CEN/TR 12401:2009 PD CEN/TR 12401:2009. Dentistry. Guidance on the classification of dental devices and accessories
BS EN 10225:2009 BS EN 10225:2009. Weldable structural steels for fixed offshore structures. Technical delivery conditions
BS EN 10238:2009 BS EN 10238:2009. Automatically blast-cleaned and automatically prefabrication primed structural steel products
BS ISO 13779-2:2008 BS ISO 13779-2:2008. Implants for surgery. Hydroxyapatite. Coatings of hydroxyapatite
BS ISO 13779-1:2008 BS ISO 13779-1:2008. Implants for surgery. Hydroxyapatite. Ceramic hydroxyapatite
09/30190446 DC 09/30190446 DC. BS ISO 1496-1 AMD7. Series 1 freight containers. Specification and testing. Part 1. General cargo containers for general purposes
09/30190473 DC 09/30190473 DC. BS 3900-0. Methods of test for paints. Part 0. Index of test methods
09/30190545 DC 09/30190545 DC. BS ISO 2493-1. Paper and board. Determination of bending resistance. Part 1. Constant rate of deflection
PD ISO/TR 24156:2008 PD ISO/TR 24156:2008. Guidelines for using UML notation in terminology work
DD ISO/TS 13434:2008 DD ISO/TS 13434:2008. Geosynthetics. Guidelines for the assessment of durability
09/30190856 DC 09/30190856 DC. BS ISO 10649-1. Cutter arbors with parallel key and tenon drive. Part 1. General dimensions
09/30190859 DC 09/30190859 DC. BS ISO 10649-2. Cutter arbors with parallel key and tenon drive. Part 2. Dimensions and designation of tool holders with hollow taper interface
09/30190862 DC 09/30190862 DC. BS ISO 10649-3. Cutter arbors with parallel key and tenon drive. Part 3. Dimensions and designation of tool holders with 7/24 taper for automatic tool changers
09/30190865 DC 09/30190865 DC. BS ISO 10649-4. Cutter arbors with parallel key and tenon drive. Part 4. Dimensions and designation of tool holders with 7/24 taper without automatic tool changers
BS ISO 30042:2008 BS ISO 30042:2008. Systems to manage terminology, knowledge and content. TermBase eXchange (TBX)
09/30191202 DC 09/30191202 DC. BS ISO 22810. Horology. Water-resistant watches
09/30191277 DC 09/30191277 DC. BS EN 61753-087-2. Fibre optic interconnecting devices and passive components performance standard. Part 087-2. Non-connectorised single-mode bidirectional 1310 nm upstr
09/30191285 DC 09/30191285 DC. BS EN 61753-086-6. Fibre optic interconnecting devices and passive components performance standard. Part 086-6. Non-connectorised single-mode bidirectional 1490 / 1550 n
BS EN ISO 1628-1:2009 BS EN ISO 1628-1:2009. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. General principles
09/30191349 DC 09/30191349 DC. BS EN 60268-4. Sound system equipment. Part 4. Microphones
DD IEC/PAS 61169-18:2009 DD IEC/PAS 61169-18:2009. Radio-frequency connectors. Sectional specification. Radio frequency coaxial connectors of type SSMA
DD IEC/PAS 61169-19:2009 DD IEC/PAS 61169-19:2009. Radio-frequency connectors. Sectional specification for SSMB series R.F. coaxial connectors
DD IEC/PAS 61169-35:2009 DD IEC/PAS 61169-35:2009. Radio-frequency connectors. Sectional specification. Radio frequency coaxial connectors of type 2,92
DD IEC/PAS 61169-41:2009 DD IEC/PAS 61169-41:2009. Radio-frequency connectors. Sectional specification for CQA series quick lock R.F. coaxial connectors
BS EN ISO 20361:2009 BS EN ISO 20361:2009. Liquid pumps and pump units. Noise test code. Grades 2 and 3 of accuracy
BS EN ISO 8359:2009 BS EN ISO 8359:2009. Oxygen concentrators for medical use. Safety requirements
BS EN ISO 9360-2:2009 BS EN ISO 9360-2:2009. Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans. HMEs for use with tracheostomized pati
BS EN ISO 8835-2:2009 BS EN ISO 8835-2:2009. Inhalational anaesthesia systems. Anaesthetic breathing systems (ISO 8835-2:2007)
09/30191867 DC 09/30191867 DC. NA to BSEN1995-1-1 AMD1. UK National Annex to Eurocode 5. Design of timber structures. Part 1-1. General. Common rules and rules for buildings
09/30191924 DC 09/30191924 DC. BS EN ISO 16014-5. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 5. Light-scatt
09/30191988 DC 09/30191988 DC. BS EN ISO 10927. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mas
09/30192009 DC 09/30192009 DC. BS ISO 10352. Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area
BS EN ISO 22867:2008 BS EN ISO 22867:2008. Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
BS EN 299:2009 BS EN 299:2009. Oil pressure atomizing nozzles. Determination of the angle and spray characteristics
BS EN 13751:2009 BS EN 13751:2009. Foodstuffs. Detection of irradiated food using photostimulated luminescence
09/30192061 DC 09/30192061 DC. BS ISO 11382. Optics and photonics. Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 μm to 25 μm
09/30192150 DC 09/30192150 DC. BS ISO/IEC 21000-19. Information technology. Multimedia framework (MPEG-21). Part 19. Media Value Chain Ontology
DD IEC/PAS 62596:2009 DD IEC/PAS 62596:2009. Electrotechnical products. Determination of restricted substances. Sampling procedure. Guidelines
09/30192320 DC 09/30192320 DC. BS EN 13633. Building hardware. Electrically controlled panic exit systems for use on escape routes. Requirements and test methods
09/30192323 DC 09/30192323 DC. BS EN 13637. Building hardware. Electrically controlled exit systems for use on escape routes. Requirements and test methods
09/30192338 DC 09/30192338 DC. BS EN 1060-1 AMD2. Non-invasive sphygmomanometers. Part 1. General requirements
09/30192383 DC 09/30192383 DC. BS ISO 4602. Reinforcements. Woven fabrics. Determination of number of yarns per unit length of warp and weft
09/30192428 DC 09/30192428 DC. BS ISO 9241-129. Ergonomics of human-system interaction. Part 129. Guidance on individualization
DD ISO/TS 16457:2009 DD ISO/TS 16457:2009. Space systems. Space environment (natural and artificial). The Earth's ionosphere model. International reference ionosphere (IRI) model and extensions to the
09/30192488 DC 09/30192488 DC. BS EN 62595. Electro-optical measurement methods of LED backlight unit for liquid crystal displays
BS EN ISO 18777:2009 BS EN ISO 18777:2009. Transportable liquid oxygen systems for medical use. Particular requirements
09/30192568 DC 09/30192568 DC. BS 8409. Fully enclosed play facilities. Code of practice
BS 4500:2009 BS 4500:2009. Limits and fits. Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm
BS 1916-1:2009 BS 1916-1:2009. Limits and fits for engineering. Guide to limits and tolerances
BS 1916-2:2009 BS 1916-2:2009. Limits and fits for engineering. Guide to the selection of fits in BS 1916-1
BS 1916-3:2009 BS 1916-3:2009. Limits and fits for engineering. Guide to tolerances, limits and fits for large diameters
09/30192653 DC 09/30192653 DC. BS ISO/IEC 14496-20 AMD1. Information technology. Coding of audio-visual objects. Part 20. Lightweight Application Scene Representation (LASeR) and Simple Aggregation Fo
BS EN 3155-032:2009 BS EN 3155-032:2009. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, coaxial, 50 ohms, size 5, male, type D, crimp, class R. Product sta
BS EN 3155-033:2009 BS EN 3155-033:2009. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical,coaxial, 50 ohms, size 5, female, type D, crimp, class R. Product St
09/30192714 DC 09/30192714 DC. BS EN 795. Personal fall protection equipment. Anchor devices
DD ISO/TS 12854:2009 DD ISO/TS 12854:2009. Gaseous media fire-extinguishing systems. Physical properties and system design. Scaling factors for Class B fuels other than heptane
BS EN ISO 8596:2009 BS EN ISO 8596:2009. Ophthalmic optics. Visual acuity testing. Standard optotype and its presentation
BS EN ISO 11981:2009 BS EN ISO 11981:2009. Ophthalmic optics. Contact lenses and contact lens care products. Determination of physical compatibility of contact lens care products with contact lenses
BS EN ISO 15254:2009 BS EN ISO 15254:2009. Ophthalmic optics and instruments. Electro-optical devices for enhancing low vision
BS EN ISO 10944:2009 BS EN ISO 10944:2009. Ophthalmic instruments. Synoptophores
BS EN ISO 10341:2009 BS EN ISO 10341:2009. Ophthalmic instruments. Refractor heads
BS EN ISO 10343:2009 BS EN ISO 10343:2009. Ophthalmic instruments. Ophthalmometers
BS 4311-2:2009 BS 4311-2:2009. Gauge blocks manufactured to imperial specification. Accessories
09/30193226 DC 09/30193226 DC. BS EN ISO 22868. Forestry and garden machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (Grade 2 accuracy)
09/30193281 DC 09/30193281 DC. BS EN 14658 AMD1. Continuous handling equipment and systems. General safety requirements for continuous handling equipment for opencast lignite mining
09/30193287 DC 09/30193287 DC. BS EN 15980. Air quality. Determination of the deposition of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[
BS EN ISO 12870:2009 BS EN ISO 12870:2009. Ophthalmic optics. Spectacle frames. Requirements and test methods
09/30193376 DC 09/30193376 DC. BS ISO 34-1. Rubber, vulcanized or thermoplastic. Determination of tear strength. Part 1. Trouser, angle and crescent test pieces
BS EN ISO 14534:2009 BS EN ISO 14534:2009. Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements
09/30193399 DC 09/30193399 DC. BS ISO 23529. Rubber. General procedures for preparing and conditioning test pieces for physical test methods
BS EN ISO 15004-1:2009 BS EN ISO 15004-1:2009. Ophthalmic instruments. Fundamental requirements and test methods. General requirements applicable to all ophthalmic instruments
BS EN ISO 11979-8:2009 BS EN ISO 11979-8:2009. Ophthalmic implants. Intraocular lenses. Fundamental requirements
09/30193520 DC 09/30193520 DC. BS EN 60947-5-3. Low-voltage switchgear and controlgear. Part 5-3. Control circuit devices and switching elements. Requirements for proximity devices with defined behavi
BS EN ISO 8835-5:2009 BS EN ISO 8835-5:2009. Inhalational anaesthesia systems. Anaesthesia ventilators
BS EN ISO 9919:2009 BS EN ISO 9919:2009. Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use
BS EN ISO 10651-6:2009 BS EN ISO 10651-6:2009. Lung ventilators for medical use. Particular requirements for basic safety and essential performance. Home-care ventilatory support devices
BS EN ISO 1889:2009 BS EN ISO 1889:2009. Reinforcement yarns. Determination of linear density
09/30193765 DC 09/30193765 DC. BS ISO 11527. Building construction. Jointing products. Test method to determine stringiness of sealants
09/30193787 DC 09/30193787 DC. BS EN 62026-7. Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs). Part 7. CompoNet
09/30193804 DC 09/30193804 DC. BS EN ISO 11986. Ophthalmic optics. Contact lenses and contact lens care products. Determination of preservative uptake and release
09/30193808 DC 09/30193808 DC. BS EN ISO 14729 AMD1. Ophthalmic optics. Contact lens care products. Microbiological requirements and test methods for products and regimens for hygienic management of c
BS EN ISO 10651-2:2009 BS EN ISO 10651-2:2009. Lung ventilators for medical use. Particular requirements for basic safety and essential performance. Home care ventilators for ventilator-dependent pati
09/30193817 DC 09/30193817 DC. BS EN ISO 8624. Ophthalmic optics. Spectacle frames. Measuring system and terminology
BS EN 61966-5:2009 BS EN 61966-5:2009. Multimedia systems and equipment. Colour measurement and management. Equipment using plasma display panels
09/30193829 DC 09/30193829 DC. BS EN ISO 1797-1. Dental rotary instruments. Shanks. Part 1. Shanks made of metals
09/30193854 DC 09/30193854 DC. BS EN ISO 7711-2. Dentistry. Rotary diamond instruments. Part 2. Discs
BS EN ISO 7376:2009 BS EN ISO 7376:2009. Anaesthetic and respiratory equipment. Laryngoscopes for tracheal intubation
BS EN 13445-1:2009 BS EN 13445-1:2009. Unfired pressure vessels. General
BS EN ISO 10651-4:2009 BS EN ISO 10651-4:2009. Lung ventilators . Particular requirements for operator-powered resuscitators
BS EN ISO 8835-4:2009 BS EN ISO 8835-4:2009. Inhalational anaesthesia systems. Anaesthetic vapour delivery devices
BS EN 13445-2:2009 BS EN 13445-2:2009. Unfired pressure vessels. Materials
BS EN ISO 18778:2009 BS EN ISO 18778:2009. Respiratory equipment. Infant monitors. Particular requirements
BS EN 13445-3:2009 BS EN 13445-3:2009. Unfired pressure vessels. Design
BS EN ISO 8185:2009 BS EN ISO 8185:2009. Respiratory tract humidifiers for medical use. Particular requirements for respiratory humidification systems
BS EN ISO 5360:2009 BS EN ISO 5360:2009. Anaesthetic vaporizers. Agent-specific filling systems
BS EN 13445-4:2009 BS EN 13445-4:2009. Unfired pressure vessels. Fabrication
BS EN ISO 11197:2009 BS EN ISO 11197:2009. Medical supply units
BS EN 13445-5:2009 BS EN 13445-5:2009. Unfired pressure vessels. Inspection and testing
BS EN ISO 21647:2009 BS EN ISO 21647:2009. Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas monitors
BS EN 13445-6:2009 BS EN 13445-6:2009. Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
09/30194014 DC 09/30194014 DC. BS EN 14351-1 AMD1. Windows and doors. Product standard, performance characteristics. Part 1. Windows and external pedestrian doorsets without resistance to fire and/or
09/30194124 DC 09/30194124 DC. BS EN 15254-7. Extended application of results from fire resistance tests. Non-loadbearing walls. Part 7. Non-load bearing sandwich panels. Ceilings
BS EN ISO 5366-1:2009 BS EN ISO 5366-1:2009. Anaesthetic and respiratory equipment. Tracheostomy tubes. Tubes and connectors for use in adults
09/30194263 DC 09/30194263 DC. BS EN 61439-6. Low-voltage switchgear and controlgear assemblies. Part 6. Busbar trunking systems (busways)
BS 8406:2009 BS 8406:2009. Event stewarding and crowd safety. Code of practice
PD 6689:2009 PD 6689:2009. Surface treatments. Guidance on the use of BS EN 12271 and BS EN 12273
09/30194335 DC 09/30194335 DC. BS EN 61800-3 AMD1. Adjustable speed electrical power drive systems. Part 3. EMC requirements and specific test methods
BS EN ISO 16484-6:2009 BS EN ISO 16484-6:2009. Building automation and control systems (BACS). Data communication conformance testing
BS EN 13445-8:2009 BS EN 13445-8:2009. Unfired pressure vessels. Additional requirements for pressure vessels of aluminium and aluminium alloys
BS EN ISO 14896:2009 BS EN ISO 14896:2009. Plastics. Polyurethane raw materials. Determination of isocyanate content
BS EN ISO 8836:2009 BS EN ISO 8836:2009. Suction catheters for use in the respiratory tract
BS EN ISO 9360-1:2009 BS EN ISO 9360-1:2009. Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans. HMEs for use with minimal tidal volume
BS EN ISO 10993-9:2009 BS EN ISO 10993-9:2009. Biological evaluation of medical devices. Framework for identification and quantification of potential degradation products
BS EN ISO 10993-6:2009 BS EN ISO 10993-6:2009. Biological evaluation of medical devices. Tests for local effects after implantation
BS EN ISO 10993-3:2009 BS EN ISO 10993-3:2009. Biological evaluation of medical devices. Tests for genotoxicity, carcinogenicity and reproductive toxicity
09/30194494 DC 09/30194494 DC. BS ISO 24099. Navigation data delivery structures and protocols
BS EN 14188-4:2009 BS EN 14188-4:2009. Joint fillers and sealants. Specifications for primers to be used with joint sealants
BS EN 15466-1:2009 BS EN 15466-1:2009. Primers for cold and hot applied joint sealants. Determination of homogeneity
BS EN 15466-2:2009 BS EN 15466-2:2009. Primers for cold and hot applied joint sealants. Determination of resistance against alkali
BS EN 15466-3:2009 BS EN 15466-3:2009. Primers for cold and hot applied joint sealants. Determination of solids content and evaporation behaviour of volatiles
DD ISO/TS 13075:2009 DD ISO/TS 13075:2009. Gaseous-media fire-extinguishing systems. Engineered extinguishing systems. Flow calculation implementation method and flow verification and testing for appr
09/30194585 DC 09/30194585 DC. BS ISO 17893 AMD1. Steel wire ropes. Vocabulary, designation and classification
09/30194709 DC 09/30194709 DC. BS 10999. Specification for distress signal units for the Fire and Rescue Service
09/30194950 DC 09/30194950 DC. BS ISO 11337. Plastics. Polyamides. Determination of e-caprolactam and w-laurolactam by gas chromatography
BS EN ISO 23210:2009 BS EN ISO 23210:2009. Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at low concentrations by use of impactors
ISO23570-3 : 2009 EDTN2 ISO23570-3 : 2009 EDTN2. ISO 23570-3 Industrial automation systems and integration - Distributed installation in industrial applications - . Part 3: Power distribution bus
09/30195191 DC 09/30195191 DC. BS ISO 24101-2. Intelligent transport systems. Communications access for land mobiles (CALM). Application management. Part 2. Conformance test
DD IEC/PAS 62612:2009 DD IEC/PAS 62612:2009. Self-ballasted LED-lamps for general lighting services. Performance requirements
BS ISO 8082-1:2009 BS ISO 8082-1:2009. Self-propelled machinery for forestry. Laboratory tests and performance requirements for roll-over protective structures. General machines
BS EN ISO 10993-18:2009 BS EN ISO 10993-18:2009. Biological evaluation of medical devices. Chemical characterization of materials
BS EN ISO 10993-17:2009 BS EN ISO 10993-17:2009. Biological evaluation of medical devices. Establishment of allowable limits for leachable substances
BS EN ISO 10993-16:2009 BS EN ISO 10993-16:2009. Biological evaluation of medical devices. Toxicokinetic study design for degradation products and leachables
BS EN ISO 10993-14:2009 BS EN ISO 10993-14:2009. Biological evaluation of medical devices. Identification and quantification of degradation products from ceramics
BS EN ISO 10993-13:2009 BS EN ISO 10993-13:2009. Biological evaluation of medical devices. Identification and quantification of degradation products from polymeric medical devices
BS EN ISO 10993-12:2009 BS EN ISO 10993-12:2009. Biological evaluation of medical devices. Sample preparation and reference materials
BS EN ISO 10993-11:2009 BS EN ISO 10993-11:2009. Biological evaluation of medical devices. Tests for systemic toxicity
09/30195381 DC 09/30195381 DC. BS EN 60269-6. Low-voltage fuses. Part 6. Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
BS EN 4199-005:2009 BS EN 4199-005:2009. Aerospace series. Bonding straps for aircraft. Flat braid conductors copper, tin plated -65°C up to 150°C and copper, nickel plated, -65°C up to 260°C. Product
BS EN 4131:2009 BS EN 4131:2009. Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickelbase alloy, aluminium IVD coated. Classifi
BS EN 4134:2009 BS EN 4134:2009. Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification:
BS EN 4129:2009 BS EN 4129:2009. Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambie
BS EN 4130:2009 BS EN 4130:2009. Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa
BS EN 4133:2009 BS EN 4133:2009. Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambie
09/30195515 DC 09/30195515 DC. BS ISO/IEC 29199-4. Information technology. JPEG XR image coding system. Part 4. Conformance testing
09/30195517 DC 09/30195517 DC. BS ISO/IEC 29199-5. Information technology. JPEG XR image coding system. Part 5. Reference software
BS ISO 16265:2009 BS ISO 16265:2009. Water quality. Determination of the methylene blue active substances (MBAS) index. Method using continuous flow analysis (CFA)
09/30195571 DC 09/30195571 DC. BS EN ISO 12677. Chemical analysis of refractory products by X-ray fluorescence (XRF). Fused cast-bead method
BS EN ISO 16061:2008 BS EN ISO 16061:2008. Instrumentation for use in association with non-active surgical implants. General requirements
09/30195693 DC 09/30195693 DC. BS EN 249. Sanitary appliances. Shower trays made from crosslinked cast acrylic sheets. Requirements and test methods
09/30195696 DC 09/30195696 DC. BS EN 15636. Sanitary appliances. Shower trays made from impact modified extruded acrylic sheets. Requirements and test methods
09/30195723 DC 09/30195723 DC. BS ISO 10617. Textiles. Standard data format for colorimetric communication. Textiles and related measurements
09/30195732 DC 09/30195732 DC. BS ISO 10804. Restrained joint systems for ductile iron pipelines. Design rules and type testing
09/30195738 DC 09/30195738 DC. BS ISO 23269-3. Ships and marine technology. Breathing apparatus for ships. Part 3. Self-contained breathing apparatus (safety equipment) required by the IMO IBC and IGC
09/30195768 DC 09/30195768 DC. BS ISO 6224. Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification
09/30195818 DC 09/30195818 DC. BS ISO 3613. Metallic and other inorganic coatings. Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys. Test methods
09/30195823 DC 09/30195823 DC. BS ISO 2135. Anodizing of aluminium and its alloys. Accelerated test of light-fastness of coloured anodic oxidation coatings using artificial light
09/30195826 DC 09/30195826 DC. BS EN ISO 2085. Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
09/30195830 DC 09/30195830 DC. BS EN ISO 3211. Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation
09/30195834 DC 09/30195834 DC. BS EN ISO 2128. Anodizing of aluminium and its alloys. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope
09/30195839 DC 09/30195839 DC. BS ISO 10216. Anodizing of aluminium and its alloys. Instrumental determination of image clarity of anodic oxidation coatings. Instrumental method
09/30195846 DC 09/30195846 DC. BS EN ISO 2143. Anodizing of aluminium and its alloys. Estimation of loss of absorptive power of anodic oxidation coatings after sealing. Dye spot test with prior acid t
09/30195849 DC 09/30195849 DC. BS EN ISO 7759. Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophoto
09/30195852 DC 09/30195852 DC. BS EN ISO 6581. Anodizing of aluminium and its alloys. Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
09/30195858 DC 09/30195858 DC. BS EN ISO 2931. Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
09/30195861 DC 09/30195861 DC. BS EN ISO 7668. Anodizing of aluminium and its alloys. Measurement of specular reflectance and specular gloss of anodic oxidation coating at angles of 20 degrees, 45 deg
09/30195864 DC 09/30195864 DC. BS EN ISO 6719. Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
09/30195867 DC 09/30195867 DC. BS EN ISO 3210. Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in ph
09/30195872 DC 09/30195872 DC. BS EN ISO 2376. Anodizing of aluminium and its alloys. Determination of electric breakdown potential
09/30195875 DC 09/30195875 DC. BS ISO 10074. Anodizing of aluminium and its alloys. Specification for hard anodic oxidation coatings on aluminium and its alloys
09/30195878 DC 09/30195878 DC. BS ISO 11005. Technical product documentation. Use of main documents
09/30195901 DC 09/30195901 DC. BS ISO 15817. Earth-moving machinery. Safety requirements for remote operator control systems
09/30196072 DC 09/30196072 DC. BS ISO 8082-2. Self-propelled machinery for forestry. Laboratory tests and performance requirements for roll-over protective structures. Part 2. Machines having a rotati
09/30196113 DC 09/30196113 DC. BS ISO 9717. Metallic and other inorganic coatings. Phosphate conversion coating of metals
09/30196132 DC 09/30196132 DC. BS ISO 11513. Gas cylinders. Refillable welded steel cylinders containing adsorbent materials for sub-atmospheric gas packaging. Design, construction and testing
09/30196149 DC 09/30196149 DC. BS ISO 10845-2. Construction procurement. Part 2. Formatting and compilation of procurement documentation
09/30196152 DC 09/30196152 DC. BS ISO 10845-3. Construction procurement. Part 3. Standard conditions of tender
09/30196155 DC 09/30196155 DC. BS ISO 10845-4. Construction procurement. Part 4. Standard conditions for the calling for expressions of interest
09/30196158 DC 09/30196158 DC. BS ISO 10845-5. Construction procurement. Part 5. Participation of targeted enterprises in contracts
09/30196161 DC 09/30196161 DC. BS ISO 10845-6. Construction procurement. Part 6. Participation of targeted partners in joint ventures in contracts
09/30196164 DC 09/30196164 DC. BS ISO 10845-7. Construction procurement. Part 7. Participation of local enterprises and labour in contracts
09/30196167 DC 09/30196167 DC. BS ISO 10845-8. Construction procurement. Part 8. Participation of targeted labour in contracts
09/30196200 DC 09/30196200 DC. BS ISO 10376. Pulps. Determination of mass fraction of fines
09/30196273 DC 09/30196273 DC. BS ISO 1920-10. Testing of concrete. Part 10. Determination of static modulus of elasticity in compression
09/30196279 DC 09/30196279 DC. BS ISO 15375. Medical infusion bottles. Suspension devices for multiple use. Requirements and test methods
09/30196282 DC 09/30196282 DC. BS ISO 8362-6. Injection containers and accessories. Part 6. Caps made of aluminium-plastics combinations for injection vials
09/30196289 DC 09/30196289 DC. BS ISO 28401. Light metals and their alloys. Titanium and titanium alloys. Classification and terminology
09/30196292 DC 09/30196292 DC. BS EN ISO 2106. Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
09/30196304 DC 09/30196304 DC. BS EN ISO 8994. Aluminium and aluminium alloys. Rating system for the evaluation of pitting corrosion. Grid method
09/30196307 DC 09/30196307 DC. BS EN ISO 8993. Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method
09/30196310 DC 09/30196310 DC. BS EN ISO 10215. Anodizing of aluminium and its alloys. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
09/30196340 DC 09/30196340 DC. BS ISO 23269-2. Ships and marine technology. Breathing apparatus for ships. Part 2. Breathing apparatus for shipboard firefighters
09/30196396 DC 09/30196396 DC. BS ISO 13822. Bases for design of structures. Assessment of existing structures
09/30196425 DC 09/30196425 DC. BS EN ISO 520. Cereals and pulses. Determination of the mass of 1000 grains
09/30196441 DC 09/30196441 DC. BS ISO 29990. Learning services for non-formal education and training. Basic requirements for service providers
09/30196489 DC 09/30196489 DC. BS ISO 105-A11. Textiles. Tests for colour fastness. Part A11. Determination of colour fastness grades by digital imaging techniques
09/30196492 DC 09/30196492 DC. BS EN ISO 25139. Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography
09/30196505 DC 09/30196505 DC. BS EN ISO 10077-2. Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. Part 2. Numerical method for frames
09/30196508 DC 09/30196508 DC. BS ISO 9328-1. Steel flat products for pressure purposes. Technical delivery conditions. Part 1. General requirements
09/30196511 DC 09/30196511 DC. BS ISO 9328-7. Steel flat products for pressure purposes. Technical delivery conditions. Part 7. Stainless steels
09/30196518 DC 09/30196518 DC. BS ISO 28581. Water quality. Determination of selected non-polar substances. Method using gas chromatography-mass spectrometry (GC-MS)
09/30196533 DC 09/30196533 DC. BS ISO 29821-1. Condition monitoring and diagnostics of machines. Ultrasound. Part 1. General guidelines
09/30196542 DC 09/30196542 DC. BS ISO 9698. Water quality. Determination of tritium activity concentration. Liquid scintillation counting method
09/30196558 DC 09/30196558 DC. BS ISO 18632. Alloyed steel. Determination of manganese. Potentiometric and visual titration method
09/30196580 DC 09/30196580 DC. BS ISO 10392. Road vehicles. Determination of centre of gravity
09/30196607 DC 09/30196607 DC. BS ISO 9328-2. Steel flat products for pressure purposes. Technical delivery conditions. Part 2. Non-alloy and alloy steels with specified elevated temperature propertie
09/30196680 DC 09/30196680 DC. BS ISO 30023. Textiles. Care labelling code using symbols for workwear to be industrially laundered
09/30196683 DC 09/30196683 DC. BS ISO 10094-1. Pneumatic fluid power. Electro-pneumatic pressure control valves. Part 1. Main characteristics to include in the supplier's literature
09/30196686 DC 09/30196686 DC. BS ISO 10094-2. Pneumatic fluid power. Electro-pneumatic pressure control valves. Part 2. Test methods to determine main characteristics to include in the supplier's lit
09/30196744 DC 09/30196744 DC. BS ISO 10542-1. Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems. Part 1. Requirements and test methods
09/30196750 DC 09/30196750 DC. BS EN ISO 15883-6. Washer-disinfectors. Part 6. Requirements and tests for washer-disinfectors employing thermal disinfection for noninvasive, non-critical medical devic
09/30196799 DC 09/30196799 DC. BS ISO 11037. Sensory analysis. General guidance for sensory assessment of the colour of products
09/30196820 DC 09/30196820 DC. BS ISO 11850. Machinery for forestry. Self-propelled machinery. Safety requirements
09/30196832 DC 09/30196832 DC. BS ISO 12690. Thermal spraying. Thermal spray coordination. Tasks and responsibilities
09/30196835 DC 09/30196835 DC. BS 8529. Composite doorsets. Domestic external doorsets. Specification
09/30196894 DC 09/30196894 DC. BS ISO 16653-3. Mobile elevating work platforms. Design, calculations, safety requirements and test methods relative to special features. Part 3. MEWPs for orchard opera
09/30196964 DC 09/30196964 DC. BS ISO 25178-7. Geometrical product specifications (GPS). Surface texture. Areal. Part 7. Software measurement standards
09/30196967 DC 09/30196967 DC. BS ISO 25178-603. Geometrical product specifications (GPS). Surface texture. Areal. Part 603. Nominal characteristics of non-contact (phaseshifting interferometric micro
09/30197002 DC 09/30197002 DC. BS ISO 10830. Space systems. Non-destructive testing. Automatic ultrasonic inspection method of graphite ingot for solid rocket motors
09/30197005 DC 09/30197005 DC. BS ISO 10871. Water quality. Determination of the inhibition of dehydrogenase activity of Arthrobacter globiformis. Solid contact test using the redox dye resazurine
09/30197008 DC 09/30197008 DC. BS ISO 11026. Heavy commercial vehicles and buses. Test method for roll stability. Closing curve test
09/30197014 DC 09/30197014 DC. BS ISO 11231. Space systems. Probabilistic Risk Assessment (PRA)
09/30197023 DC 09/30197023 DC. BS ISO 22448. Earth-moving. Theft deterrent systems. Classification and performance
09/30197207 DC 09/30197207 DC. BS ISO 27026. Space systems. Programme management. Breakdown of project management structures
09/30197440 DC 09/30197440 DC. BS ISO 16612-2. Graphic technology. Variable data exchange. Part 2. Using PDF/X-4 and PDF/X-5 (PDF/VT-1 and PDF/VT-2)
09/30197538 DC 09/30197538 DC. BS ISO 12778. Metallic and other inorganic coatings. Vitreous and porcelain enamels. Glass-lined flanged steel pipes and flanged steel fittings. Quality requirements
09/30197593 DC 09/30197593 DC. BS ISO/IEC 15938-6 AMD3. Information technology. Multimedia content description interface. Part 6. Reference software
09/30197604 DC 09/30197604 DC. BS ISO/IEC 15938-7 AMD5. Information technology. Multimedia content description interface. Part 7. Conformance testing
09/30197608 DC 09/30197608 DC. BS ISO 16844-2. Road vehicles. Tachograph systems. Part 2. Electrical interface with recording unit
09/30197687 DC 09/30197687 DC. BS ISO 14921. Thermal spraying. Procedures for the application of thermally sprayed coatings for engineering components
09/30197721 DC 09/30197721 DC. BS ISO 10789. Space systems. Programme management. Information and documentation management
09/30197747 DC 09/30197747 DC. BS ISO 10218-1. Robots and robotic devices. Safety requirements. Part 1. Industrial robots
09/30197768 DC 09/30197768 DC. BS ISO 11132. Sensory analysis. Methodology. General guidance for monitoring the performance of a quantitative sensory panel
09/30197779 DC 09/30197779 DC. BS ISO 7240-25. Fire detection and fire alarm systems. Part 25. Components using radio transmission paths
09/30197784 DC 09/30197784 DC. BS EN ISO 11137-2. Sterilization of health care products. Radiation. Part 2. Establishing the sterilization dose
09/30197837 DC 09/30197837 DC. BS ISO/IEC 29133. Information technology. Automatic identification and data capture techniques. Quality test specification for rewritable hybrid media data carriers
09/30197932 DC 09/30197932 DC. BS EN 60512-99-001. Connectors for electronic equipment. Tests and measurements. Part 99-001. Test schedule for mating and un-mating connectors under electrical load. Po
BS EN ISO 8536-3:2009 BS EN ISO 8536-3:2009. Infusion equipment for medical use. Aluminium caps for infusion bottles
09/30198146 DC 09/30198146 DC. BS EN ISO 12180-1. Geometrical Product Specifications (GPS). Cylindricity. Part 1. Vocabulary and parameters of cylindrical form
09/30198149 DC 09/30198149 DC. BS EN ISO 12180-2. Geometrical Product Specifications (GPS). Cylindricity. Part 2. Specification operators
09/30198152 DC 09/30198152 DC. BS EN ISO 12181-1. Geometrical Product Specifications (GPS). Roundness. Part 1. Vocabulary and parameters of roundness
09/30198155 DC 09/30198155 DC. BS EN ISO 12181-2. Geometrical Product Specifications (GPS). Roundness. Part 2. Specification operators
09/30198158 DC 09/30198158 DC. BS EN ISO 12780-1. Geometrical Product Specifications (GPS). Straightness. Part 1. Vocabulary and parameters of straightness
09/30198161 DC 09/30198161 DC. BS EN ISO 12780-2. Geometrical Product Specifications (GPS). Straightness. Part 2. Specification operators
09/30198164 DC 09/30198164 DC. BS EN ISO 12781-1. Geometrical Product Specifications (GPS). Flatness. Part 1. Vocabulary and parameters of flatness
09/30198167 DC 09/30198167 DC. BS EN ISO 12781-2. Geometrical Product Specifications (GPS). Flatness. Part 2. Specification operators
09/30198170 DC 09/30198170 DC. BS EN ISO 14253-3. Geometrical Product Specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Part 3. Guidelines for achieving agreements
09/30198173 DC 09/30198173 DC. BS EN ISO 15530-3. Geometrical Product Specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement. Part 3. Use o
09/30198176 DC 09/30198176 DC. BS EN ISO 17450-1. Geometrical product specifications (GPS). General concepts. Part 1. Model for geometrical specification and verification
09/30198179 DC 09/30198179 DC. BS EN ISO 17450-2. Geometrical product specifications (GPS). General concepts. Part 2. Basic tenets, specifications, operators and uncertainties
PD ISO/TR 12773-2:2009 PD ISO/TR 12773-2:2009. Business requirements for health summary records. Environmental scan
BS EN 2755:2009 BS EN 2755:2009. Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Elevated load at ambient temperature. Technical specification
PD ISO/TR 10771-2:2008 PD ISO/TR 10771-2:2008. Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Rating method
09/30198696 DC 09/30198696 DC. BS EN 13618. Flexible hose assemblies in drinking water installations. Functional requirements and test methods
09/30198700 DC 09/30198700 DC. BS EN 15037-4. Precast concrete products. Beam-and-block floor systems. Part 4. Expanded polystyrene blocks
BS EN 4132:2009 BS EN 4132:2009. Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temper
09/30198858 DC 09/30198858 DC. BS ISO 5794-1 AMD1. Rubber compounding ingredients. Silica, precipitated, hydrated. Part 1. Non-rubber tests
09/30198874 DC 09/30198874 DC. BS ISO 12830. Paper, board and pulps. Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium
BS EN ISO 5983-2:2009 BS EN ISO 5983-2:2009. Animal feeding stuffs. Determination of nitrogen content and calculation of crude protein content. Block digestion and steam distillation method
09/30199057 DC 09/30199057 DC. BS ISO 11926-1. Connections for general use and fluid power. Ports and stud ends with ISO 263 UN and UNF threads and O-ring sealing. Part 1. Ports with truncated housing
09/30199060 DC 09/30199060 DC. BS ISO 11926-2. Connections for general use and fluid power. Ports and stud ends with ISO 263 inch threads and O-ring sealing. Part 2. Heavy-duty (S series) stud ends
09/30199068 DC 09/30199068 DC. BS ISO 11926-3. Connections for general use and fluid power. Ports and stud ends with ISO 263 inch threads and O-ring sealing. Part 3. Light-duty (L series) stud ends
BS EN ISO 845:2009 BS EN ISO 845:2009. Cellular plastics and rubbers. Determination of apparent density
BS 7846:2009 BS 7846:2009. Electric cables. Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1000 V, having low emission of smoke and corrosive gases when affected by fire
BIP 2124:2009 BIP 2124:2009. The Design and Installation of Voice Alarm Systems. A Guide to BS 5839-8
09/30199694 DC 09/30199694 DC. BS ISO/IEC 14496-14. Information technology. Coding of audio-visual objects. Part 14. MP4 file format
09/30199696 DC 09/30199696 DC. BS ISO/IEC 23000-3 AMD2. Information technology. Multimedia application format (MPEG-A). Part 3. MPEG photo player application format
09/30199698 DC 09/30199698 DC. BS ISO/IEC 23000-9 AMD2. Information technology. Multimedia application format (MPEG-A). Part 9. Digital Multimedia Broadcasting application format
09/30199700 DC 09/30199700 DC. BS ISO/IEC 23000-12. Information technology. Multimedia application format (MPEG-A). Part 12. Interactive music application format
BS EN 15322:2009 BS EN 15322:2009. Bitumen and bituminous binders. Framework for specifying cut-back and fluxed bituminous binders
09/30199781 DC 09/30199781 DC. BS 5T 100. Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock
09/30199783 DC 09/30199783 DC. BS 4S 500. Procedure for inspection, testing and acceptance of steel sheet and strip
09/30199785 DC 09/30199785 DC. BS 6S 100. Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube)
BS EN ISO 676:2009 BS EN ISO 676:2009. Spices and condiments. Botanical nomenclature
BS EN ISO 948:2009 BS EN ISO 948:2009. Spices and condiments. Sampling
09/30199922 DC 09/30199922 DC. BS 3HR 1. Specification for nickel-chromium-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)
09/30199924 DC 09/30199924 DC. BS 3HR 2. Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1
09/30199929 DC 09/30199929 DC. BS 2HR 3. Specification for nickel-cobalt-chromium-molybdenum- aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Co 20, Cr 14.8, Mo
09/30199931 DC 09/30199931 DC. BS 2HR 4. Specification for nickel-chromium-cobalt-aluminium-molybdenum- titanium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Cr 15, Co 14.2, Al
09/30199933 DC 09/30199933 DC. BS 2HR 5. Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Cr 19.5, Ti 0.4)
09/30199935 DC 09/30199935 DC. BS 2HR 6. Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (Nickel base, Cr 21.7, Fe 18.5, Mo 9,
09/30199937 DC 09/30199937 DC. BS 2HR 10. Specification for nickel-cobalt-chromium-molybdenum- titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Co 20, Cr 20, Mo
09/30199939 DC 09/30199939 DC. BS 4HR 100. Procedure for inspection, testing and acceptance of wrought heat-resisting alloys
09/30199986 DC 09/30199986 DC. BS ISO 15524. Pneumatic fluid power. Cylinders. Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm
09/30200044 DC 09/30200044 DC. BS EN 12390-6. Testing hardened concrete. Part 6. Tensile splitting strength of test specimens
09/30200047 DC 09/30200047 DC. BS EN 12369-2. Wood-based panels. Characteristic values for structural design. Part 2. Plywood
09/30200073 DC 09/30200073 DC. BS EN 806-5. Specification for installations inside buildings conveying water for human consumption. Part 5. Operation and maintenance
09/30200076 DC 09/30200076 DC. BS EN 15939. Hardware for furniture. Determination of strength and load capacity of wall attachment devices
BS EN ISO 11806:2008 BS EN ISO 11806:2008. Agricultural and forestry machinery. Portable hand-held combustion engine driven brush cutters and grass trimmers. Safety
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
