BIS Standards Catalogue
DD ENV 1855:1996 DD ENV 1855:1996. Identification card systems. Intersector integrated circuit(s) card systems. Tolerance ranges for IC cards
BS EN 1446:1996, BS 2782-11:Method 1114C:1996 BS EN 1446:1996, BS 2782-11:Method 1114C:1996. Plastics piping and ducting systems.Thermoplastics pipes. Determination of ring flexibility
DD ENV 50121-5:1996 DD ENV 50121-5:1996. Railway applications. Electromagnetic compatibility. Fixed power supply installations
DD ENV 50121-4:1996 DD ENV 50121-4:1996. Railway applications. Electromagnetic compatibility. Emission and immunity of the signalling and telecommunications apparatus
DD ENV 50121-3-2:1996 DD ENV 50121-3-2:1996. Railway applications. Electromagnetic compatibility. Rolling stock. Apparatus
DD ENV 50121-3-1:1996 DD ENV 50121-3-1:1996. Railway applications. Electromagnetic compatibility. Rolling stock. Train and complete vehicle
DD ENV 50121-2:1996 DD ENV 50121-2:1996. Railway applications. Electromagnetic compatibility. Emission of the whole railway system to the outside world
DD ENV 50121-1:1996 DD ENV 50121-1:1996. Railway applications. Electromagnetic compatibility. General
BS 5883:1996 BS 5883:1996. Specification for surface swimming goggles
BS EN 122190:1996 BS EN 122190:1996. Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series 7-16
BS 7866:1996 BS 7866:1996. Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers
BS EN 61071-2:1996, IEC 61071-2:1994 BS EN 61071-2:1996, IEC 61071-2:1994. Power electronic capacitors. Requirements for disconnecting test on fuses, destruction test, self healing test and endurance
BS EN 61329:1996, IEC 61329:1995 BS EN 61329:1996, IEC 61329:1995. Sound system equipment. Methods for measuring and specifying the performance of sounders (electroacoustic transducers for tone produc
BS 2782-3:Method 370:1996, ISO 9352:1995 BS 2782-3:Method 370:1996, ISO 9352:1995. Methods of testing plastics. Mechanical properties. Determination of resistance to wear by abrasive wheels
BS 2782-7:Method 740B:1996, ISO 1147:1995 BS 2782-7:Method 740B:1996, ISO 1147:1995. Methods of testing plastics. Rheological properties. Polymer dispersions and synthetic rubber latices. Freeze-thaw
BS 2782-7:Method 740C:1996, ISO 2115:1996 BS 2782-7:Method 740C:1996, ISO 2115:1996. Methods of testing plastics. Rheological properties. Polymer dispersions. Determination of white point temperature
BS 5514-1:1996, ISO 3046-1:1995 BS 5514-1:1996, ISO 3046-1:1995. Reciprocating internal combustion engines. Performance. Standard reference conditions, declarations of power, fuel and lubricating oil
BS 5514-7:1996, ISO 3046-7:1995 BS 5514-7:1996, ISO 3046-7:1995. Reciprocating internal combustion engines: performance. Codes for engine power
BS 7854-2:1996, ISO 10816-2:1996 BS 7854-2:1996, ISO 10816-2:1996. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Large land-based steam turbine generator
BS 7698-8:1996, ISO 8528-8:1995 BS 7698-8:1996, ISO 8528-8:1995. Reciprocating internal combustion engine driven alternating current generating sets. Requirements and tests for low-power generating se
BS 7698-9:1996, ISO 8528-9:1995 BS 7698-9:1996, ISO 8528-9:1995. Reciprocating internal combustion engine driven alternating current generating sets. Measurement and evaluation of mechanical vibration
BS ISO 8178-3:1994 BS ISO 8178-3:1994. Reciprocating internal combustion engines. Exhaust emission measurement. Definitions and methods of measurement of exhaust gas smoke under steady state condition
BS 7016-8:1996, ISO 7967-8:1994 BS 7016-8:1996, ISO 7967-8:1994. Components and systems of reciprocating internal combustion engines. Glossary of terms for starting systems
BS 7698-7:1996, ISO 8528-7:1994 BS 7698-7:1996, ISO 8528-7:1994. Reciprocating internal combustion engine driven alternating current generating sets. Technical declarations for specification and desig
DC96/500807 DC96/500807. Ergonomics of the thermal environment. Code of practice for the design and evaluation of working practices for cold indoor environments
DC96/703799 DC96/703799. Inland navigation vessels. Rope tubs (prEN 12339)
DC96/704435 DC96/704435. Methods for the calibration of vibration and shock pick-ups. Part 21. Shock calibration using laser doppler velocimeter (ISO/DIS 5347-21)
DD ENV 1649:1996 DD ENV 1649:1996. Bar coding. Operational aspects affecting the reading of bar code symbols
DD ENV 1828:1996 DD ENV 1828:1996. Medical informatics. Structure for classification and coding of surgical procedures
DD ENV 1973:1996 DD ENV 1973:1996. Information technology. European Subsets of ISO/IEC 10646-1
PD 7028:1996 PD 7028:1996. Essential requirements for terminal equipment intended for connection to analogue baseband leased lines of the public telecommunications network
BS EN 50090-3-2:1996 BS EN 50090-3-2:1996. Home and building electronic systems (HBES). Aspects of application. User process
BS EN 577:1996 BS EN 577:1996. Aluminium and aluminium alloys. Liquid metal. Specifications
BS EN ISO 8596:1996, BS 4274-2:1996 BS EN ISO 8596:1996, BS 4274-2:1996. Visual acuity test types. Specification for Landolt ring optotype for non-clinical purposes
BS EN ISO 8597:1996, BS 4274-3:1996 BS EN ISO 8597:1996, BS 4274-3:1996. Visual acuity test types. Method for correlating optotypes used for non-clinical purposes
DD ENV 1992-1-4:1996 DD ENV 1992-1-4:1996. Eurocode 2: Design of concrete structures. General rules. Lightweight aggregate concrete with closed structure (together with United Kingdom National Applica
DD ENV 1992-1-5:1996 DD ENV 1992-1-5:1996. Eurocode 2: Design of concrete structures. General rules. Structures with unbonded and external prestressing tendons (together with United Kingdom National A
DD ENV 1992-1-2:1996 DD ENV 1992-1-2:1996. Eurocode 2: Design of concrete structures. General rules. Structural fire design (together with United Kingdom National Application Document)
DD ENV 1992-1-3:1996 DD ENV 1992-1-3:1996. Eurocode 2: Design of concrete structures. General rules. Precast concrete elements and structures (together with United Kingdom National Application Documen
DD ENV 1991-2-1:1996 DD ENV 1991-2-1:1996. Basis of design and actions on structures. Actions on structures. Densities, self-weight and imposed loads (together with United Kingdom Application Document
DC96/704649 DC96/704649. ISO/DIS 9692-2 (prEN ISO 9692-2). Welding and allied processes. Joint preparation. Part 2. Submerged arc welding of steels
W/D DC96/704405 W/D DC96/704405. Geometrical product specification (GPS). Length standards. Gauge blocks (ISO/DIS 3650)
DC96/703958 DC96/703958. Standard for valves for tubeless tyres and valves for inner tubes. Dimensions and designation (ISO/DIS 9413)
DC96/560778 DC96/560778. BS ISO 8536-4. British standard for infusion equipment for medical use. Part 4. Infusion sets for single use, gravity feed
DC96/560777 DC96/560777. BS ISO 1135-4. British standard for transfusion equipment for medical use. Part 4. Transfusion sets for single use
DC96/500863 DC96/500863. BS 4585. Methods of test for spices and condiments. Part 9. Determination of acid. Insoluble ash (ISO/DIS 930)
DC96/500862 DC96/500862. BS 4585. Methods of test for spices and condiments. Part 3. Determination of total ash (ISO/DIS 928)
DC96/641648 DC96/641648. ISO/IEC DIS 14709-1. Information technology. Customer premises cabling. Part 1. Integrated Services Digital Network (ISDN)
DC96/641270 DC96/641270. Implementation of ISO/IEC 13522-5. 1996. Information technology. Coding of multimedia and hypermedia information. Part 5. Support for Base-Level Interactive Applications
DC96/641269 DC96/641269. Implementation of ISO/IEC 13522-3. Information technology. Coding of multimedia and hypermedia information. Part 3. MHEG script interchange representation
DC96/121035 DC96/121035. BS 3900 Part C5. Methods of test for paints. Determination of film thickness (ISO/DIS 2808)
DC96/102110 DC96/102110. prEN 12269. Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the 'beam test'
BS 8800:1996 BS 8800:1996. Guide to occupational health and safety management systems
BS EN 60510-2-6:1996, IEC 60510-2-6:1992 BS EN 60510-2-6:1996, IEC 60510-2-6:1992. Methods of measurement for radio equipment used in satellite earth stations. Measurements for sub-systems. Frequency
BS EN 60510-2-5:1996, IEC 60510-2-5:1992 BS EN 60510-2-5:1996, IEC 60510-2-5:1992. Methods of measurement for radio equipment used in satellite earth stations. Measurements for sub-systems. Frequency
BS 6840-18:1996, IEC 60268-18:1995 BS 6840-18:1996, IEC 60268-18:1995. Sound system equipment. Peak programme level meters. Guide for digital audio level meter
BS EN 60510-3-4:1996, IEC 60510-3-4:1992 BS EN 60510-3-4:1996, IEC 60510-3-4:1992. Methods of measurement for radio equipment used in satellite earth stations. Methods of measurement on combinations o
DD ENV 60695-2-4/2:1996, IEC 60695-2-4/2:1994 DD ENV 60695-2-4/2:1996, IEC 60695-2-4/2:1994. Fire hazard testing. Test methods. 500 W nominal test flames and guidance
BS EN 60695-2-1/2:1996, IEC 60695-2-1/2:1994 BS EN 60695-2-1/2:1996, IEC 60695-2-1/2:1994. Fire hazard testing. Test methods. Glow-wire flammability test on materials
BS EN 166000:1996 BS EN 166000:1996. Harmonized system of quality assessment for electronic components. Generic specification. Surface acoustic wave (SAW) filters
BS CECC 00808:1996 BS CECC 00808:1996. Harmonized system of quality assessment for electronic components. Guidance document: use and application of plastic encapsulated devices
BS EN 61610:1996, IEC 61610:1995 BS EN 61610:1996, IEC 61610:1995. Prints and transparencies produced from electronic sources. Assessment of image quality
BS EN 61041-2:1996, BS 7434-2:1996,IEC 61041-2:1994 BS EN 61041-2:1996, BS 7434-2:1996,IEC 61041-2:1994. Non-broadcast video tape recorders. Methods of measurement. Video characteristics chrominance S
DD ENV 50185-2:1996 DD ENV 50185-2:1996. Infra-red free air application. Applications
BS EN 116000-3:1996 BS EN 116000-3:1996. Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays. Test and measurement procedu
BS EN 116000-1:1996 BS EN 116000-1:1996. Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays. General
BS 7868:1996, IEC 61295:1994 BS 7868:1996, IEC 61295:1994. Guide for calibration tapes for broadcast VTRs
BS EN 474-2:1996 BS EN 474-2:1996. Earth-moving machinery. Safety. Requirements for tractor-dozers
BS EN 10083-3:1996 BS EN 10083-3:1996. Quenched and tempered steels. Technical delivery conditions for boron steels
BS ISO 2330:1995 BS ISO 2330:1995. Fork-lift trucks. Fork arms. Technical characteristics and testing
BS EN ISO 10240:1996 BS EN ISO 10240:1996. Small craft. Owner's manual
BS ISO 509:1996 BS ISO 509:1996. Pallet trucks. Principal dimensions
BS EN 789:1996 BS EN 789:1996. Timber structures. Test methods. Determination of mechanical properties of wood-based panels
DD ENV 1992-1-6:1996 DD ENV 1992-1-6:1996. Eurocode 2: Design of concrete structures. General rules. Plain concrete structures
BS EN 1033:1996 BS EN 1033:1996. Hand-arm vibration. Laboratory measurement of vibration at the grip surface of hand-guided machinery. General
BS EN 474-3:1996 BS EN 474-3:1996. Earth-moving machinery. Safety. Requirements for loaders
BS EN 910:1996 BS EN 910:1996. Destructive tests on welds in metallic materials. Bend tests
BSEN 1055:1996, BS 2782-11:Method 1111A:1996 BSEN 1055:1996, BS 2782-11:Method 1111A:1996. Plastics piping systems. Thermoplastics piping systems for soil and waste discharge inside buildings. Test me
DC96/121809 DC96/121809. ISO/DIS 14616. Plastics. Heat-shrinkable films of polyethylene, ethylene copolymers and their mixtures. Determination of shrinkage stress and contraction stress
DC96/560834 DC96/560834. In vitro diagnostic systems. Culture media for microbiology. Performance criteria for culture media (prEN 12322)
DC96/704045 DC96/704045. Protective caps for valves with flanged connections prEN 12351
DC96/704883 DC96/704883. Aerospace series. Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads of classifications 450MPa (at ambient temperature) /425°C, 600MPa (at ambient t
DC96/704899 DC96/704899. Chromic-sulphuric acid pickle of aluminium and aluminium alloys (prEN 2334)
DC96/704900 DC96/704900. Aerospace series. Shaft nuts and rings threaded, self-locking, in FE-PA92HT (A286), silver plated assembly recommendations (TR 4239)
BS 8444-3:1996, IEC 60300-3-9:1995 BS 8444-3:1996, IEC 60300-3-9:1995. Risk management. Guide to risk analysis of technological systems
BS CECC 00804:1996 BS CECC 00804:1996. Harmonized system of quality assessment for electronic components. Interpretation of 'EN ISO 9000:1994'. Reliability aspects for electronic components
BS ISO 6710:1995 BS ISO 6710:1995. Single-use containers for venous blood specimen collection
BS EN ISO 6341:1996, BS 6068-5.1:1996 BS EN ISO 6341:1996, BS 6068-5.1:1996. Water quality. Biological methods. Water quality. Determination of the inhibition of the mobility of Daphnia magna Straus (
DC96/121996 DC96/121996. IEC 1061-3-1 (15C/625/CDV). Specification for non-impregnated densified laminated wood for electrical purposes. Part 3. Specifications for individual materials. Sheet 1. Sheet
DC96/204549 DC96/204549. PC optical connector reference plug selection for measuring return loss and prediction of random mated connector performances [86B/767/CDV]
DC96/204550 DC96/204550. Attenuation of random mated connectors [86B/768/CDV]
DC96/703122 DC96/703122. Technical documentation in the product life cycle. Part 1. Definition of a life cycle model and allocation of technical documents to phases and activities (ISO/CD 15226). Defi
DC96/703123 DC96/703123. Technical drawings. Simplified representations. Part 1:Pictorial presentation (ISO/CD 12752-1). Pictorial presentation
DC96/703124 DC96/703124. Technical drawings. Simplified representations. Part 2. Dimensioning (ISO/CD 12752-2). Dimensioning
BS EN 45503:1996 BS EN 45503:1996. Attestation standard for the assessment of contract award procedures of entities operating in the water, energy, transport and telecommunication sectors
BS EN 1411:1996, BS 2782-11:Method 1108B:1996 BS EN 1411:1996, BS 2782-11:Method 1108B:1996. Plastics piping and ducting systems. Thermoplastics pipes. Determination of resistance to external blows by
BS EN 10246-7:1996 BS EN 10246-7:1996. Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the det
BS EN 10246-1:1996 BS EN 10246-1:1996. Non-destructive testing of steel tubes. Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for veri
BS ISO 11567:1995 BS ISO 11567:1995. Carbon fibre. Determination of filament diameter and cross-sectional area
BS EN 381-3:1996 BS EN 381-3:1996. Protective clothing for users of hand-held chain saws. Test methods for footwear
DD 235:1996 DD 235:1996. Guide to in-vehicle information systems
DC96/121968 DC96/121968. Rubber, vulcanized. Determination of elongation, creep and tension set at constant load (ISO/DIS 12244)
DC96/121969 DC96/121969. Rubber, vulcanized. Determination of low temperature characteristics. Temperature-retraction procedure (TR test) (Amendment No. 1 to ISO 2921:1982)
DC96/121976 DC96/121976. Plastics. Determination of dynamic mechanical properties. Part 8. Longitudinal and shear vibration. Wave-propagation method (ISO/DIS 6721-8)
DC96/121977 DC96/121977. Plastics. Determination of dynamic mechanical properties. Part 9. Tensile vibration. Sonic-pulse propagation method (ISO/DIS 6721-9)
DC96/121978 DC96/121978. Plastics. Determination of dynamic mechanical properties. Part 10. Complex shear viscosity using a parallel-plate oscillatory rheometer (ISO/DIS 6721-10)
DC96/204180 DC96/204180. prEN 50106-2-45. Additional routine tests for portable electric heating tools and similar appliances within the scope of EN 60335-2-45
DC96/520654 DC96/520654. BS EN 50131-6. Alarm systems. Intrusion systems. Part 6. Power supplies [prEN 50131-6]
DC96/520655 DC96/520655. BS EN 50132-2-1. Alarm systems. CCTV surveillance systems for use in security applications. Part 2-1. Black & white cameras [prEN 50132-2-1]
DC96/520694 DC96/520694. BS 7755. Soil quality. Part 1. Terminology and classification. New section. Simplified soil description [ISO/DIS 11259]
DC96/204543 DC96/204543. prEN 50106-2-35. Additional routine tests for instantaneous water heaters within the scope of EN 60335-2-35
DC96/204542 DC96/204542. prEN 50106-2-21. Additional routine tests for storage water heaters within the scope of EN 60335-2-21
DC96/204401 DC96/204401. IEC 1010. Safety requirements for electrical equipment for measurement, control, and laboratory use. IEC 1010-3. Protocol for the preparation of conformity verification report
DC96/204365 DC96/204365. IEC 1189. Test methods for electronic materials, interconnection structures and assemblies. Amendment 1 to Part 1. General test methods and methodology. Amendment 3 to Part 2.
DC96/121995 DC96/121995. Plastics. Determination of the combustibility of specimens using a 125 mm flame source. (ISO/DIS 10351)
DC96/121994 DC96/121994. Plastics. Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source. (ISO/DIS 1210)
BS EN 313-1:1996 BS EN 313-1:1996. Plywood. Classification and terminology. Plywood. Classification and terminology. Classification
BS EN 1298:1996 BS EN 1298:1996. Mobile access and working towers. Rules and guidelines for the preparation of an instruction manual
BS EN 717-3:1996 BS EN 717-3:1996. Wood-based panels. Determination of formaldehyde release. Formaldehyde release by the flask method
BS EN 600:1996, BS 3704:1996 BS EN 600:1996, BS 3704:1996. Natural rubber latex male condoms
BS 6912-23:1996, ISO 9244:1995 BS 6912-23:1996, ISO 9244:1995. Safety of earth-moving machinery. Safety signs and hazard pictorials. General principles
BS EN ISO 12236:1996 BS EN ISO 12236:1996. Geosynthetics. Static puncture test (CBR test)
BS 6914-9:1996, ISO 7133:1994 BS 6914-9:1996, ISO 7133:1994. Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Terminology and commercial specifications for tra
BS EN 10154:1996 BS EN 10154:1996. Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions
BS EN 942:1996 BS EN 942:1996. Timber in joinery. General classification of timber quality
DC96/103101 DC96/103101. prEN 12372. Tests on natural stone. Determination of flexural strength under concentrated load
DC96/122186 DC96/122186. Vulcanized rubber. Preformed gaskets used in buildings. Classification. Material specifications. Test methods on gaskets. (ISO/CD 3934-1)
DC96/122187 DC96/122187. Vulcanized rubber and rubber products. Specification for controlled storage and packing. (ISO/CD 2230.2)
DC96/122188 DC96/122188. Thermoplastic rubber. Preformed gaskets used in buildings. Classification. Material specifications. Test methods on gaskets (ISO/CD 3934-2.2)
DC96/122201 DC96/122201. Rubber, vulcanized thermoplastic. Determination of stress relaxation in compression at ambient and at elevated temperatures (ISO/CD 3384)
DC96/122206 DC96/122206. Plastics pipes and fittings. Bending-tensile cycle test for PE/steel transition fittings and PE tapping tees (ISO/DIS 13924)
DC96/122245 DC96/122245. Plastics. Method for outdoor exposure of photodegradable plastics (ISO/CD 15250)
DC96/561236 DC96/561236. Visual acuity test types. Part 1. Specification for test charts for clinical determination of distance visual acuity
DC96/705320 DC96/705320. Technical Drawings. General principles of presentation. Part 25. Lines on shipbuilding drawings. Lines on shipbuilding drawings
DC96/705319 DC96/705319. Technical Drawings. General principles of presentation. Part 24. Lines on mechanical engineering drawings. Lines on mechanical engineering drawings
DC96/705318 DC96/705318. Technical drawings. General principles of presentation. Part 22. Leader lines. Leader lines
DC96/121408 DC96/121408. BS EN ISO 12944-7. Paints and varnishes. Corrosion protection of steel structures by protective paint schemes. Part 7. Execution and supervision of paint work. (ISO/DIS 12944-
DC96/121409 DC96/121409. BS EN ISO 12944-8. Paints and varnishes. Corrosion protection of steel structures by protective paint schemes. Part 8. Development of specifications for new work and maintenan
DC96/122202 DC96/122202. Rubber. Determination of abrasion resistance using a relating drum device (ISO/CD 4649)
DC96/540875 DC96/540875. Ergonomic requirements for office work with visual display terminals (VDTs). Part 15. Command dialogues (ISO/DIS 9241-15)
DC96/561185 DC96/561185. ISO 7197. Neurosurgical implants. Sterile, single-use hydrocephalus shunts and components. (ISO/DIS 7197)
DC96/122316 DC96/122316. ISO/DIS 291. Plastics. Standard atmosphere for conditioning and testing
DC96/705900 DC96/705900. Gas-filled storage water heaters for sanitary uses fitted or intended to be filled with flue dampers (prEN 89/prA2)
BS 5588-0:1996 BS 5588-0:1996. Fire precautions in the design, construction and use of buildings. Guide to fire safety codes of practice for particular premises/applications
BS EN 60966-2-1:1996, IEC 60966-2-1:1991 BS EN 60966-2-1:1996, IEC 60966-2-1:1991. Radio frequency and coaxial cable assemblies. Sectional specification for flexible coaxial cable assemblies
BS EN 61249-7-1:1996, IEC 61249-7-1:1995 BS EN 61249-7-1:1996, IEC 61249-7-1:1995. Materials for interconnection structures. Sectional specification set for restraining core materials. Copper/invar/co
BS EN 61182-7:1996, IEC 61182-7:1995 BS EN 61182-7:1996, IEC 61182-7:1995. Printed boards. Electronic data description and transfer. Bare board electric test information in digital form
BS EN 50117-2:1996 BS EN 50117-2:1996. Coaxial cables. Sectional specification for indoor drop cables
BS EN 60966-3:1996, IEC 60966-3:1992 BS EN 60966-3:1996, IEC 60966-3:1992. Radio frequency and coaxial cable assemblies. Sectional specification for semi-flexible coaxial cable assemblies
BS EN 60966-3-1:1996, IEC 60966-3-1:1992 BS EN 60966-3-1:1996, IEC 60966-3-1:1992. Radio frequency and coaxial cable assemblies. Blank detail specification for semi-flexible coaxial cable assemblies
BS EN 60966-4-1:1996, IEC 60966-4-1:1992 BS EN 60966-4-1:1996, IEC 60966-4-1:1992. Radio frequency and coaxial cable assemblies. Blank detail specification for semi-rigid coaxial cable assemblies
BS EN 60966-2-2:1996, IEC 60966-2-2:1992 BS EN 60966-2-2:1996, IEC 60966-2-2:1992. Radio frequency and coaxial cable assemblies. Blank detail specification for flexible coaxial cable assemblies
BS EN 60966-4:1996, IEC 60966-4:1992 BS EN 60966-4:1996, IEC 60966-4:1992. Radio frequency and coaxial cable assemblies. Sectional specification for semi-rigid coaxial cable assemblies
BS IEC 1000-2-6:1995 BS IEC 1000-2-6:1995. Electromagnetic compatibility (EMC). Environment. Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conduct
BS IEC 1000-2-5:1995 BS IEC 1000-2-5:1995. Electromagnetic compatibility (EMC). Environment. Classification of electromagnetic environments. Basic EMC publication
BS EN 60835-3-2:1996, BS 7573-3.2:1996,IEC 60835-3-2:1995 BS EN 60835-3-2:1996, BS 7573-3.2:1996,IEC 60835-3-2:1995. Methods of measurement for equipment used in digital microwave radio transmission s
BS EN 1056:1996, BS 2782-11:Method 1107A:1996 BS EN 1056:1996, BS 2782-11:Method 1107A:1996. Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) w
BS EN 10106:1996 BS EN 10106:1996. Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state
DD 233:1996 DD 233:1996. Code of practice for gaseous fire fighting systems
BS EN 1120:1996, BS 2782-12:Methods 1209A & B BS EN 1120:1996, BS 2782-12:Methods 1209A & B. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Determinatio
BS 4401-5:1996, ISO 1444:1996 BS 4401-5:1996, ISO 1444:1996. Methods of test for meat and meat products. Determination of free fat content
DD ENV 12260:1996 DD ENV 12260:1996. Water quality. Determination of nitrogen. Determination of bound nitrogen, after combustion and oxidation to nitrogen dioxide, using chemiluminescence detection
BS 5760-13.5:1996, IEC 60605-3-5:1996 BS 5760-13.5:1996, IEC 60605-3-5:1996. Reliability of systems, equipment and components. Guide to reliability test conditions for consumer equipment. Ground mobil
BS EN 1174-1:1996 BS EN 1174-1:1996. Sterilization of medical devices. Estimation of the population of micro-organisms on product. Requirements
BS EN 2149:1996 BS EN 2149:1996. Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series
BS EN ISO 1127:1997 BS EN ISO 1127:1997. Stainless steel tubes. Dimensions, tolerances and conventional masses per unit length
BS 4084:1996, ISO 3161:1996 BS 4084:1996, ISO 3161:1996. UNJ threads, with controlled root radius, for aerospace. Inch series
BS ISO 11323:1996 BS ISO 11323:1996. Iron ores. Vocabulary
BS 1841-1:1996, ISO 730-1:1994 BS 1841-1:1996, ISO 730-1:1994. Rear-mounted, three-point linkage on agricultural wheeled tractors. Specification for categories 1, 2, 3 and 4
BS EN 1119:1996, BS 2782-12:Method 1223C:1996 BS EN 1119:1996, BS 2782-12:Method 1223C:1996. Plastics piping systems. Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test
BS EN ISO 10321:1996, ISO 10321:1992 BS EN ISO 10321:1996, ISO 10321:1992. Geotextiles. Tensile test for joints/seams by wide-width method
BS EN ISO 10319:1996, ISO 10319:1993 BS EN ISO 10319:1996, ISO 10319:1993. Geotextiles. Wide-width tensile test
BS 6843-1:1996, ISO 8216-1:1996 BS 6843-1:1996, ISO 8216-1:1996. Classification of petroleum fuels. Marine fuels
BS EN ISO 7823-1:1996 BS EN ISO 7823-1:1996. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics. Cast sheets
BS MA 100:1996, ISO 8217:1996 BS MA 100:1996, ISO 8217:1996. Specification for petroleum fuels for marine oil engines and boilers
DC96/102426 DC96/102426. prEN 717-1. Wood-based panels. Determination of formaldehyde release. Part 1. Formaldehyde emission by the chamber method
DC96/705066 DC96/705066. Aerospace series. Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire resistant, operating temperature 260 °C peak. Part 001. Technical specification
DC96/705067 DC96/705067. Aerospace series. Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire resistant, operating temperature 260 °C peak. Part 002. Specification of perfor
DC96/705068 DC96/705068. Aerospace series. Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire resistant, operating temperature 260°C peak. Part 003. Square flange receptacle
DC96/705069 DC96/705069. Aerospace series. Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire resistant, operating temperature 260°C peak. Part 004. Jam-nut mounted receptac
DC96/705070 DC96/705070. Aerospace series. Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire resistant, operating temperature 260°C peak. Part 005. Hermetic square flange r
DC96/705071 DC96/705071. Aerospace series. Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire resistant, operating temperature 260°C peak. Part 006. Hermetic jam-nut mounted
DC96/705072 DC96/705072. Aerospace series. Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire resistant, operating temperature 260°C peak. Part 007. Hermetic receptacle with
BS EN 1702:1996 BS EN 1702:1996. EDI. Message. Sanitary/phytosanitary certificate (SANCRT)
BS EN 50144-2-9:1996 BS EN 50144-2-9:1996. Safety of hand-held electric motor operated tools. Particular requirements for tappers
BS EN 50144-2-4:1996 BS EN 50144-2-4:1996. Safety of hand-held electric motor operated tools. Particular requirements for sanders
BS EN 872:1996, BS 6068-2.54:1996 BS EN 872:1996, BS 6068-2.54:1996. Water quality. Determination of suspended solids. Method by filtration through glass fibre filters
BS EN 1077:1996 BS EN 1077:1996. Specification for helmets for alpine skiers
BS EN 1701:1996 BS EN 1701:1996. EDI. Message. Price/sales catalogue message (PRICAT)
BS EN 50144-2-8:1996 BS EN 50144-2-8:1996. Safety of hand-held electric motor operated tools. Particular requirements for sheet metal shears and nibblers
BS EN 50144-2-7:1996 BS EN 50144-2-7:1996. Safety of hand-held electric motor operated tools. Particular requirements for spray guns
DC96/103635 DC96/103635. prEN 12400. Windows and doors. Mechanical durability. Requirements and classification
DC96/120091 DC96/120091. prEN ISO 14918. Thermal spraying. Approval testing of thermal sprayers (ISO/DIS 14918)
DC96/122136 DC96/122136. BS 7011:Part 1:Section 1.1:1989. Consumable accessories for light microscopes. Immersion oils. Specification for immersion oils for general use
DC96/122137 DC96/122137. BS ISO 14615. Adhesives. Durability of structural adhesive joints. Exposure to humidity and temperature under load (ISO/DIS 14615)
DC96/122496 DC96/122496. ISO/DIS 7370. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Specification for nominal sizes, diameter series, nominal pipe lengths and tolerances
DC96/122505 DC96/122505. Rubber hoses and hose assemblies for rotary drilling and vibration application. Specification (ISO/CD 6807)
WD/DC96/122655 WD/DC96/122655. Rubber and plastics hoses for fuel. Methods of test for flammability (ISO/DIS 13774)
DC96/206108 DC96/206108. Domestic and similar electronic equipment interconnection requirements. A V link. BS EN 50157-2-2. Part 2. Basic system orientated commands. [CENELEC prEN 50157-2-2]. BS EN 50
BS EN 50016:1996 BS EN 50016:1996. Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus 'p'
BS EN ISO 9241-10:1996, ISO 9241-10:1996 BS EN ISO 9241-10:1996, ISO 9241-10:1996. Ergonomic requirements for office work with visual display terminals (VDTs). Dialogue principles
BS EN 50144-2-5:1996 BS EN 50144-2-5:1996. Safety of hand-held electric motor operated tools. Particular requirements for circular saws and circular knives
BS EN 50144-2-10:1996 BS EN 50144-2-10:1996. Safety of hand-held electric motor operated tools. Particular requirements for jig saws
BS EN 50134-7:1996 BS EN 50134-7:1996. Alarm systems. Social alarm systems. Application guidelines
BS EN 60068-2-68:1996, IEC 60068-2-68:1994 BS EN 60068-2-68:1996, IEC 60068-2-68:1994. Environmental testing. Test methods. Test L. Dust and sand
BS EN 61346-1:1996, IEC 61346-1:1996 BS EN 61346-1:1996, IEC 61346-1:1996. Industrial systems, installations and equipment and industrial products. Structuring principles and reference designations. B
BS EN 60695-2-1/3:1996, IEC 60695-2-1/3:1994 BS EN 60695-2-1/3:1996, IEC 60695-2-1/3:1994. Fire hazard testing. Test methods. Glow-wire ignitability test on materials
BS EN 60068-2-69:1996, IEC 60068-2-69:1995 BS EN 60068-2-69:1996, IEC 60068-2-69:1995. Environmental testing. Test methods. Tests. Test Te. Solderability testing of electronic components for surface m
BS EN 60068-2-70:1996, IEC 60068-2-70:1995 BS EN 60068-2-70:1996, IEC 60068-2-70:1995. Environmental testing. Test methods. Test Xb. Abrasion of markings and letterings caused by rubbing of fingers an
BS EN 165000-4:1996 BS EN 165000-4:1996. Film and hybrid integrated circuits. Customer information, product assessment level schedules and blank detail specification
BS EN 165000-3:1996 BS EN 165000-3:1996. Film and hybrid integrated circuits. Self-audit checklist and report for film and hybrid integrated circuit manufacturers
BS EN 165000-2:1996 BS EN 165000-2:1996. Film and hybrid integrated circuits. Internal visual inspection and special tests
BS EN 165000-1:1996 BS EN 165000-1:1996. Film and hybrid integrated circuits. Generic specification. Capability approval procedure
BS EN 61212-2:1996 BS EN 61212-2:1996. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Methods of test
BS EN 1412:1996 BS EN 1412:1996. Copper and copper alloys. European numbering system
BS EN 50090-2-1:1996 BS EN 50090-2-1:1996. Home and building electronic systems (HBES). System overview. Architecture
BS EN 60896-2:1996, IEC 60896-2:1995 BS EN 60896-2:1996, IEC 60896-2:1995. Stationary lead-acid batteries. General requirements and methods of test. Valve regulated types
BS EN 60931-2:1996, IEC 60931-2:1996 BS EN 60931-2:1996, IEC 60931-2:1996. Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Agein
BS EN 60794-3:1996, IEC 60794-3:1994 BS EN 60794-3:1996, IEC 60794-3:1994. Optical fibre cables. Telecommunication cables. Sectional specification
BS EN 61249-5-1:1996, IEC 61249-5-1:1995 BS EN 61249-5-1:1996, IEC 61249-5-1:1995. Materials for interconnection structures. Sectional specification set for conductive foils and films with and without
BS EN 60305:1996, IEC 60305:1995 BS EN 60305:1996, IEC 60305:1995. Insulators for overhead lines with a nominal voltage above 1 kV. Ceramic or glass insulator units for a.c. systems. Characteristics o
BS EN 60086-4:1996, IEC 60086-4:1996 BS EN 60086-4:1996, IEC 60086-4:1996. Primary batteries. Safety standard for lithium batteries
BS EN 122180:1996 BS EN 122180:1996. Harmonized system of quality assessment for electronic components. Sectional specification. Radio frequency coaxial connectors. Series SSMC
BS EN 60068-2-52:1996, IEC 60068-2-52:1996 BS EN 60068-2-52:1996, IEC 60068-2-52:1996. Environmental testing. Test methods. Tests. Test Kb. Salt mist cyclic (sodium chloride solution)
DC96/706288 DC96/706288. Aerospace series. Identification marking methods for engine items (prEN 4301)
DC96/706615 DC96/706615. Petroleum products. Prediction of bulk moduli of petroleum fluids for hydraulic power systems (ISO/DIS 6073)
DC96/707113 DC96/707113. Non-destructive testing. Qualification and certification of personnel (ISO/CD 9712)
DC96/120933 DC96/120933. BS EN ISO 1461. Hot dip galvanized coatings on fabricated ferrous products. Specifications (prEN ISO 1461)
DC96/120934 DC96/120934. BS EN ISO 14713. Protection against corrosion of iron and steel in structures. Metal coatings. Guidelines (prEN ISO 14713)
DC96/122153 DC96/122153. BS 7079 Part B8 Preparation of steel substrates before application of paints and related products. Methods for the assessment of surface cleanliness. Field method for refracto
DC96/122156 DC96/122156. BS 7079 Part B9 Preparation of steel substrates before application of paints and related products. Methods for the assessment of surface cleanliness. Field method for the cond
DC96/122727 DC96/122727. Plastics. Determination of the Izod impact strength (ISO/CD 180)
DC96/122728 DC96/122728. Plastics. Determination of Charpy impact strength. Part 1. Not instrumented impact test (ISO/CD 179-1). Part 1: Non-instrumented impact test
DC96/122730 DC96/122730. Textile floor coverings. Laboratory cleaning procedure using spray extraction (ISO/DIS 11379)
DC96/122816 DC96/122816. prEN ISO 13000:Part 1 (ISO/DIS 13000-1). Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Part 1. Requirements and designation
96/205832 DC 96/205832 DC. IEC 695-6-31.Part 6. Guidance and test methods for the assessment of obscuration hazard of smoke from electrotechnical products involved in fires. Section 31. Application to
DC96/205889 DC96/205889. IEC 1866. Interactive text transmission system (ITTS) [IEC 100C/19/CDV]
DC96/205978 DC96/205978. IEC 825-4. Safety of laser products. Part 4. Laser guards (76/141/CDV)
DC96/206383 DC96/206383. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Part 2. Performance requirements for
BS EN 1277:1996, BS2782-11:Meth1112L,M,N&Q:1996 BS EN 1277:1996, BS2782-11:Meth1112L,M,N&Q:1996. Plastics piping systems. Thermoplastics piping systems for buried non-pressure applications. Test m
BS 5964-3:1996, ISO 4463-3:1995 BS 5964-3:1996, ISO 4463-3:1995. Building setting out and measurement. Check-lists for the procurement of surveys and measurement services
BS EN ISO 7437:1996 BS EN ISO 7437:1996. Technical drawings. Construction drawings. General rules for execution of production drawings for prefabricated structural components
DD ENV 1893:1996 DD ENV 1893:1996. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of tensile properties
DD ENV 1894:1996 DD ENV 1894:1996. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of shear strength by compression l
DD ENV 1892:1996 DD ENV 1892:1996. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of tensile properties
DC96/561517 DC96/561517. British Standard for containers and accessories for pharmaceutical preparations. Part 5. Dropper assemblies (Identical with ISO/DIS 11418-5)
DC96/706219 DC96/706219. Aerospace series. Connectors, electrical, circular, bayonet coupling. Operating temperature 175°C or 200°C continuous duty. Part 001. Technical specification (prEN 3646-001).
BS ISO 11170:1995 BS ISO 11170:1995. Hydraulic fluid power. Filter elements. Procedure for verifying performance characteristics. Polyester film/glass filament combinations with pressure sensitive adh
BS ISO 2261:1994 BS ISO 2261:1994. Reciprocating internal combustion engines. Hand-operated control devices. Standard direction of motion
BS EN ISO 11442-4:1996, BS 308-4.14:1996 BS EN ISO 11442-4:1996, BS 308-4.14:1996. Technical product documentation. Handling of computer-based technical information. Document management and retrieval
BS EN ISO 11442-3:1996, BS 308-4.13:1996 BS EN ISO 11442-3:1996, BS 308-4.13:1996. Technical product documentation. Handling of computer-based technical information. Phases in the product design proce
BS EN ISO 11442-2:1996, BS 308-4.12:1996 BS EN ISO 11442-2:1996, BS 308-4.12:1996. Technical product documentation. Handling of computer-based technical information. Original documentation
BS EN ISO 11442-1:1996, BS 308-4.11:1996 BS EN ISO 11442-1:1996, BS 308-4.11:1996. Technical product documentation. Handling of computer-based technical information. Security requirements
BS EN ISO 10209-2:1996, BS 308-1.7:1996 BS EN ISO 10209-2:1996, BS 308-1.7:1996. Technical product documentation. Vocabulary. Terms relating to projection methods
BS EN ISO 6412-3:1996, BS 308-4.8:1996 BS EN ISO 6412-3:1996, BS 308-4.8:1996. Technical drawings. Simplified representation of pipelines. Terminal features of ventilation and drainage systems
BS EN ISO 6410-3:1996, BS 308-1.20:1996 BS EN ISO 6410-3:1996, BS 308-1.20:1996. Technical drawings. Screw threads and threaded parts. Simplified representation
BS EN ISO 6410-2:1996, BS 308-1.11:1996 BS EN ISO 6410-2:1996, BS 308-1.11:1996. Technical drawings. Screw threads and threaded parts. Screw thread inserts
BS EN ISO 6410-1:1996, BS 308-1.10:1996 BS EN ISO 6410-1:1996, BS 308-1.10:1996. Technical drawings. Screw threads and threaded parts. General conventions
BS 7846:1996 BS 7846:1996. Specification for 600/1000 V armoured fire-resistant electric cables having low emission of smoke and corrosive gases when affected by fire
BS EN 122150:1996 BS EN 122150:1996. Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series EIA Flange
BS EN 60154-1:1996, IEC 60154-1:1982 BS EN 60154-1:1996, IEC 60154-1:1982. Flanges for waveguides. General requirements
BS EN 120000:1996 BS EN 120000:1996. Harmonized system of quality assessment for electronic components. General specification: semiconductor optoelectronic and liquid crystal devices
DD ENV 50218:1996 DD ENV 50218:1996. Description of a parametrized European mini test chip
BS EN ISO 7998:1996 BS EN ISO 7998:1996. Optics and optical instruments. Spectacle frames. Vocabulary and lists of equivalent terms
BS 7793-2:1996 BS 7793-2:1996. Vitreous enamel coatings for use on bolted steel panels. Specification for coatings on bolted steel panels for use in industrial liquid storage tanks
BS EN 1940:1996 BS EN 1940:1996. Self adhesive tapes. Measurement of breaking strength
BS EN 1941:1996 BS EN 1941:1996. Self adhesive tapes. Measurement of elongation at break
BS EN 1942:1996 BS EN 1942:1996. Self adhesive tapes. Measurement of thickness
BS EN 1943:1996 BS EN 1943:1996. Self adhesive tapes. Measurement of static shear adhesion
BS EN 1944:1996 BS EN 1944:1996. Self adhesive tapes. Measurement of unwind adhesion at low speed
BS EN 1945:1996 BS EN 1945:1996. Self adhesive tapes. Measurement of quick stick
DC96/122671 DC96/122671. Determination of viscosity using free falling-ball viscometer (ISO/CD 12058-2). Part 2: Free-falling-ball method
DC96/561544 DC96/561544. Ophthalmic instruments. Direct ophthalmoscopes (ISO/DIS 10942)(prEN ISO 10942)
BS EN 1093-3:1996 BS EN 1093-3:1996. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Emission rate of a specified pollutant. Bench test method using the real pollutan
BS EN 838:1996 BS EN 838:1996. Workplace atmospheres. Diffusive samplers for the determination of gases and vapours. Requirements and test methods
DD ENV 1991-1:1996 DD ENV 1991-1:1996. Eurocode 1. Basis of design and actions on structures. Basis of design (together with United Kingdom national application document)
BS 5489-9:1996 BS 5489-9:1996. Road lighting. Code of practice for lighting for urban centres and public amenity areas
DC96/206758 DC96/206758. IEC 118-12. Hearing aids. Part 12. Dimensions of electrical connector systems (IEC document 29/330/FDIS)
DC96/501351 DC96/501351. Packaging. Flexible collapsible tubes. Terminology (prEN 12374)
BS EN ISO 9288:1996 BS EN ISO 9288:1996. Thermal insulation. Heat transfer by radiation. Physical quantities and definitions
BS EN ISO 9346:1996 BS EN ISO 9346:1996. Thermal insulation. Mass transfer. Physical quantities and definitions
BS EN 1703:1996 BS EN 1703:1996. EDI. Message. Sales data report message (SLSRPT)
BS EN 1256:1996 BS EN 1256:1996. Gas welding equipment. Specification for hose assemblies for equipment for welding, cutting and allied processes
BS ISO/IEC 8613-12:1996 BS ISO/IEC 8613-12:1996. Information processing. Text and office systems. Office document architecture (ODA) and interchange format. Information technology. Open Document Archi
BS ISO 6036:1996 BS ISO 6036:1996. Cinematography. Colour motion-picture prints and slides for television. Density specifications
BS EN 60831-2:1996, IEC 60831-2:1995 BS EN 60831-2:1996, IEC 60831-2:1995. Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Ageing te
BS 6404-20:1996 BS 6404-20:1996. Magnetic materials. Resistance and temperature classification of insulation coatings
DD 237:1996, ISO/TR 12603:1996 DD 237:1996, ISO/TR 12603:1996. Building construction machinery and equipment. Classification
BS 2782-3:Method 352F:1996, ISO 7765-2:1994 BS 2782-3:Method 352F:1996, ISO 7765-2:1994. Methods of testing plastics. Mechanical properties. Determination of impact resistance by the free-falling dart
BS 5964-2:1996, ISO 4463-2:1995 BS 5964-2:1996, ISO 4463-2:1995. Building setting out and measurement. Measuring stations and targets
BS EN ISO 3450:1996 BS EN ISO 3450:1996. Safety of earth-moving machinery. Specification for braking systems and performance requirements and test procedures for rubber-tyred machines
BS EN 913:1996 BS EN 913:1996. Gymnastic equipment. General safety requirements and test methods
BS EN 914:1996 BS EN 914:1996. Gymnastic equipment. Parallel bars and combination asymmetric/parallel bars. Functional and safety requirements, test methods
BS EN 915:1996 BS EN 915:1996. Gymnastic equipment. Asymmetric bars. Functional and safety requirements, test methods
BS EN 916:1996 BS EN 916:1996. Gymnastic equipment. Vaulting boxes. Functional and safety requirements, test methods
BS 6356-9:1996 BS 6356-9:1996. Spraying equipment for crop protection. Specification for systems for closed transfer of liquid formulations
BS 6356-8:1996 BS 6356-8:1996. Spraying equipment for crop protection. Specification for induction hoppers
BS 2000-0.1:1996 BS 2000-0.1:1996. Methods of test for petroleum and its products. General introduction. Specifications. IP Standard thermometers. IP Standard thermometers
BS 2000-0.2:1996 BS 2000-0.2:1996. Methods of test for petroleum and its products. General introduction. Specifications for IP standard reference liquids
BS 2000-0.3:1996 BS 2000-0.3:1996. Methods of test for petroleum and its products. General introduction. Significance and usage of IP precision data
BS 2000-0.4:1996 BS 2000-0.4:1996. Methods of test for petroleum and its products. General introduction. Barometric pressure corrections
BS 2000-143:1996 BS 2000-143:1996. Methods of test for petroleum and its products. Determination of asphaltenes (heptane insolubles) in crude petroleum and petroleum products
BS 2000-346:1996 BS 2000-346:1996. Methods of test for petroleum and its products. Determination of polycyclic aromatics in unused lubricating base oils and asphaltene free petroleum fractions. Dimeth
BS 2000-412:1996, ISO 6614:1994 BS 2000-412:1996, ISO 6614:1994. Methods of test for petroleum and its products. Petroleum products. Determination of water separability of petroleum oils and synthetic
BS 2000-414:1996, ISO 9950:1995 BS 2000-414:1996, ISO 9950:1995. Methods of test for petroleum and its products. Industrial quenching oils. Determination of cooling characteristics. Nickel-alloy probe
BS ISO 6982:1992 BS ISO 6982:1992. Hydraulic fluid power. Cylinders. Rod end spherical eyes. Mounting dimensions
BS ISO 6981:1992 BS ISO 6981:1992. Hydraulic fluid power. Cylinders. Rod end plain eyes. Mounting dimensions
DC96/123054 DC96/123054. Plastics. Method for exposure of photodegradable plastics to artificial weathering with fluorescent UV lamps (ISO/CD 15316)
DC96/123055 DC96/123055. Plastics. Method for exposure of photodegradable plastics to artificial weathering with xenon-arc sources (ISO/CD 15315)
DC96/123062 DC96/123062. prEN ISO 7231. Polymeric materials, cellular flexible. Method of assessment of air flow value at constant pressure-drop (ISO 7231)
DC96/123063 DC96/123063. prEN ISO 3386-1. Polymeric materials, cellular flexible. Determination of stress-straincharacteristic in compression. Part 1. Low-density materials (ISO 3386-1)
DC96/123199 DC96/123199. Plastics. Pourable phenolic (PF) compression and injection moulding materials. Part 2. Preparation of test specimens and determination of properties (ISO/CD 14526-2). Part 2:
DC96/123210 DC96/123210. Plastics. Pourable epoxy (EP) compression and injection moulding materials. Part 3. Requirements on moulding materials (ISO/CD 12242-3)
DC96/123231 DC96/123231. ISO/DIS 12176-3. Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Part 3. Fusion operator badge. Part 3 : Fusion operator badge
DC96/206958 DC96/206958. IEC 1188-1-1. Design and use of printed boards and printed board assemblies. Part 1. Generic design and use requirements for printed boards and printed board assemblies. Secti
DC96/707220 DC96/707220. Transformers for resistance welding equipment. General specifications applicable to all transformers (ISO/DIS 5826)
BS 7371-9:1996 BS 7371-9:1996. Coatings on metal fasteners. Specification for phosphate or phosphate and oil coatings
BS EN ISO 5771:1996 BS EN ISO 5771:1996. Rubber hose and hose assemblies for transferring anhydrous ammonia. Specification
BS 2782-11:Method 1121H:1996, ISO/TR 10501:1993 BS 2782-11:Method 1121H:1996, ISO/TR 10501:1993. Methods of testing plastics. Thermoplastics pipes, fittings and valves. Thermoplastics pipes for the tr
BS EN 60870-2-1:1996, IEC 60870-2-1:1995 BS EN 60870-2-1:1996, IEC 60870-2-1:1995. Telecontrol equipment and systems. Operating conditions. Power supply and electromagnetic compatibility
BS EN 61194:1996 BS EN 61194:1996. Characteristic parameters of stand-alone photovoltaic (PV) systems
DD ENV 50219:1996 DD ENV 50219:1996. Description of the reliability test structures of the European mini test chip
DC96/122792 DC96/122792. ISO/DIS 10782-1. Definitions and attributes of data elements for control and monitoring of textile processes. Part 1. Spinning, preparatory and related processes
DC96/122207 DC96/122207. ISO/DIS 13951. Test method for the resistance of polyolefin pipe assemblies to tensile loading
DC96/103465 DC96/103465. prEN 12391-3. Chimneys. Execution of metal chimneys and liners. Part 3. Custom built chimneys
DC96/103464 DC96/103464. prEN 12391-2. Chimneys. Execution of metal chimneys and liners. Part 2. Relining
DC96/122208 DC96/122208. DIS 13956. Plastics pipes and fittings. Determination of cohesive strengths Tear test for polyolethylene (PE) assemblies
DC96/705073 DC96/705073. Aerospace series. Connectors, electrical, circular, scoop-proof, coupled by threaded ring, fire resistant, operating temperature 260°C peak. Part 008. Plug. Product standard (
BS EN 971-1:1996 BS EN 971-1:1996. Paints and varnishes. Terms and definitions for coating materials. General terms
PD 6600:1996, CENELEC Report R117-003:1995 PD 6600:1996, CENELEC Report R117-003:1995. Validation of EXPRESS models
PD 6599:1996, CENELEC Report R117-002:1995 PD 6599:1996, CENELEC Report R117-002:1995. Comparison of different information modelling approaches and styles
PD 6601:1996, CENELEC Report R117-004:1995 PD 6601:1996, CENELEC Report R117-004:1995. JESSI 0.8 μm CMOS transistor model for analogue and digital circuit simulation
PD 6602:1996, CENELEC Report R117-007:1995 PD 6602:1996, CENELEC Report R117-007:1995. Recommendations on necessary concepts to model behavioural semantics
PD 6603:1996, CENELEC Report R117-008:1995 PD 6603:1996, CENELEC Report R117-008:1995. Language requirements for high-level synthesis
BS EN 61515:1996, IEC 61515:1995 BS EN 61515:1996, IEC 61515:1995. Mineral insulated thermocouple cables and thermocouples
BS EN 474-4:1996 BS EN 474-4:1996. Earth-moving machinery. Safety. Requirements for backhoe loaders
BS 903-2:1997 BS 903-2:1997. Physical testing of rubber. Guide to the application of statistics to rubber testing
BS EN 462-5:1996 BS EN 462-5:1996. Non-destructive testing. Image quality of radiographs. Image quality indicators (duplex wire type), determination of image unsharpness value
BS EN 611-2:1997 BS EN 611-2:1997. Tin and tin alloys. Pewter and pewterware. Pewterware
BS EN 760:1996 BS EN 760:1996. Welding consumables. Fluxes for submerged arc welding. Classification
BS 1881-130:1996 BS 1881-130:1996. Testing concrete. Method for temperature-matched curing of concrete specimens
BS 7856:1996 BS 7856:1996. Code of practice for design of alternating current, watthour meters for active energy (classes 1 and 2)
BS 7870:Part 2:1996 BS 7870:Part 2:1996. LV and MV polymeric insulated cables for use by distribution and generation utilities. Methods of test
DC96/123240 DC96/123240. Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer. Gas chromatographic method (ISO 6401 ADD1)
DC96/561871 DC96/561871. BS ISO 10473:199X. Ambient air. Measurements of the mass of particulate matter on a filter medium. Beta-ray absorption method (ISO/DIS 10473)
DC96/707447 DC96/707447. Aerospace series. Non conformance procedures for components using salvage inserts thin wall (prEN 3916)
DC96/707723 DC96/707723. Technical product documentation. Lettering. Part 0. General requirements (ISO/DIS 3098-0)
DC96/707728 DC96/707728. Solder wire, solid and flux cored. Specification and test methods. Part 2. Determination of flux content (ISO/DIS 12224-2)
DC96/707894 DC96/707894. Agricultural wheeled tractors. Front-mounted linkage and power take-off. Part 1. Requirements (ISO/DIS 8759-1)
DC96/707895 DC96/707895. Agricultural wheeled tractors. Front-mounted linkage and power take-off. Part 2. Stationary equipment connection (ISO/DIS 8759-2)
BS EN 237:1996, BS 2000-428:1996 BS EN 237:1996, BS 2000-428:1996. Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic
BS EN 852-1:1996, BS 2782-11:Method 1122A:1996 BS EN 852-1:1996, BS 2782-11:Method 1122A:1996. Plastics piping systems for the transport of water intended for human consumption. Migration assessment.
BS EN 826:1996 BS EN 826:1996. Thermal insulating products for building applications. Determination of compression behaviour
BS EN 1305:1996 BS EN 1305:1996. Inland navigation vessels. Connections for the discharge of oily mixture
BS EN 1306:1996 BS EN 1306:1996. Inland navigation vessels. Connections for the discharge of waste water
BS EN 10209:1996 BS EN 10209:1996. Cold rolled low carbon steel flat products for vitreous enamelling. Technical delivery conditions
BS EN 1130-1:1997 BS EN 1130-1:1997. Furniture. Cribs and cradles for domestic use. Safety requirements
BS EN 1130-2:1996 BS EN 1130-2:1996. Furniture. Cribs and cradles for domestic use. Test methods
BS EN 1327:1996 BS EN 1327:1996. Gas welding equipment. Thermoplastic hoses for welding and allied processes
BS EN 1326:1996 BS EN 1326:1996. Gas welding equipment. Small kits for gas brazing and welding
BS EN ISO 7536:1996, BS 2000-40:1996,ISO 7536:1994 BS EN ISO 7536:1996, BS 2000-40:1996,ISO 7536:1994. Methods of test for petroleum and its products. Petroleum products. Determination of oxidation st
BS EN ISO 12205:1996, BS 2000-388:1996,ISO 12205:1995 BS EN ISO 12205:1996, BS 2000-388:1996,ISO 12205:1995. Methods of test for petroleum and its products. Petroleum products. Determination of the ox
BS EN ISO 3104:1996, BS 2000-71.1:1996,ISO 3104:1994 BS EN ISO 3104:1996, BS 2000-71.1:1996,ISO 3104:1994. Methods of test for petroleum and its products. Petroleum products. Transparent and opaque li
DC96/207509 DC96/207509. Amendment 1 to IEC 335-2-54. Additional requirements for steam cleaners. Particular requirements for surface-cleaning appliances (61/1042/CD). Particular requirements for gene
DC96/561897 DC96/561897. Digital coding of oral health and care (ISO/DIS 13668)
DC96/561898 DC96/561898. Pen systems. Part 1. Glass cylinders for insulin pen-injectors (ISO/DIS 13926-1)
DC96/708159 DC96/708159. prEN 12434. Cryogenic vessels. Cryogenic flexible hoses
BS 4193-22:1996, ISO 10910:1995 BS 4193-22:1996, ISO 10910:1995. Hardmetal insert tooling. Classification and designation of approximate chip control zones for indexable inserts with chipbreakers
BS EN 1498:1996 BS EN 1498:1996. Rescue equipment. Rescue loops
BS EN 1497:1996 BS EN 1497:1996. Rescue equipment. Rescue harnesses
BS EN 1496:1996 BS EN 1496:1996. Rescue equipment. Rescue lifting devices
BS EN 854:1997 BS EN 854:1997. Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification
BS EN 1395:1996 BS EN 1395:1996. Thermal spraying. Acceptance inspection of thermal spraying equipment
BS 5882:1996 BS 5882:1996. Specification for a total quality assurance programme for nuclear installations
BS EN 60268-7:1996, BS 6840-7:1996,IEC 60268-7:1996 BS EN 60268-7:1996, BS 6840-7:1996,IEC 60268-7:1996. Sound system equipment. Headphones and earphones
BS EN 50132-7:1996 BS EN 50132-7:1996. Alarm systems. CCTV surveillance systems for use in security applications. Application guidelines
BS EN 1012-2:1997 BS EN 1012-2:1997. Compressors and vacuum pumps. Safety requirements. Vacuum pumps
BS EN 1012-1:1997 BS EN 1012-1:1997. Compressors and vacuum pumps. Safety requirements. Compressors
DC96/123373 DC96/123373. prEN 12200-3. Plastics rainwater piping systems for above-ground external use. Unplasticized poly (vinyl chloride) (PVC-U). Part 3. Recommended practice for installation. Part
DC96/207782 DC96/207782. IEC 143-3. Series capacitors for power systems. Part 3. Internal fuses (IEC Document 33/247/CDV)
WD/DC96/708643 WD/DC96/708643. Copper and copper alloys. Seamless, round tubes for general purposes (prEN 12449)
DC96/708641 DC96/708641. Copper and copper alloys. Seamless, round tubes for heat exchangers (prEN 12451)
DC96/707912 DC96/707912. Agricultural and forestry machines. Electromagnetic compatibility. Test methods and acceptance criteria (ISO/DIS 14982)
BS EN 60870-6-502:1996, IEC 60870-6-502:1995 BS EN 60870-6-502:1996, IEC 60870-6-502:1995. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendati
BS EN 61358:1996, IEC 61358:1996 BS EN 61358:1996, IEC 61358:1996. Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2)
BuyIT Guidelines BuyIT Guidelines.
WD/HB10105 : 1996 WD/HB10105 : 1996. Lifts handbook. An explanatory supplement to BS 5655:Parts 1 and 2
DD ENV 12005:1996 DD ENV 12005:1996. Information technology. Procedures for European registration of cultural elements
DD ENV 1284:1996 DD ENV 1284:1996. Identification card systems. Intersector rules for locking and unlocking of integrated circuit(s) cards
BS 1881-208:1996 BS 1881-208:1996. Testing concrete. Recommendations for the determination of the initial surface absorption of concrete
BS EN 140104:1996 BS EN 140104:1996. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed low power non-wirewound resistors (Assessment levels SB and SC
BS EN 140103:1996 BS EN 140103:1996. Harmonized system of quality assessment for electronic components. Blank detail specification. Fixed low power non-wirewound resistors (Assessment level P)
BS EN 140102:1996 BS EN 140102:1996. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed low power non-wirewound resistors (assessment level M)
DC96/103553 DC96/103553. Amendment No. 1 to BS 5950. Structural use of steelwork in building. Part 6:1995. Code of practice for design of light gauge profiled steel sheeting. Part 6: Code of practice
DC96/123411 DC96/123411. Specification for organic sulfur compounds used as odorants for natural gas (ISO/DIS 13734)
DC96/706265 DC96/706265. Aerospace series. Aircraft oxygen systems and equipment. Part 1. General design requirements (Rev BS 3N 100:1985). Design and installation
DC96/708445 DC96/708445. Non-destructive testing. Industrial radiographic films. Part 1. Classification of film systems for industrial radiography (ISO/DIS 11699-1)
DC96/708447 DC96/708447. Non-destructive testing. Radiographic examination of metallic materials by X and Gamma rays. Basic rules (revision of ISO 5579:1985)
DC96/708448 DC96/708448. Non-destructive testing. Thermal neutron radiographic testing. General principles and basic rules (ISO/DIS 11537)
BS 6388-3:1996, ISO 5630-3:1996 BS 6388-3:1996, ISO 5630-3:1996. Accelerated ageing of paper and board. Method for moist heat treatment at 80°C and 65% relative humidity
BS EN 60068-4:1996, IEC 60068-4:1987 BS EN 60068-4:1996, IEC 60068-4:1987. Environmental testing. Information for specification writers. Test summaries
BS EN 61107:1996, IEC 61107:1996 BS EN 61107:1996, IEC 61107:1996. Data exchange for meter reading, tariff and load control. Direct local data exchange
BS 4376-2:1996 BS 4376-2:1996. Electrically operated blood storage refrigerators. Specification for cabinets for the storage of frozen plasma
BS 2782-4:Method 454G:1996, ISO 4576:1996 BS 2782-4:Method 454G:1996, ISO 4576:1996. Methods of testing plastics. Chemical properties. Polymer dispersions. Determination of sieve residue (gross partic
BS EN ISO 12185:1996, BS 2000-365:1996,ISO 12185:1996 BS EN ISO 12185:1996, BS 2000-365:1996,ISO 12185:1996. Methods of test for petroleum and its products. Crude petroleum and petroleum products. Det
DC96/105041 DC96/105041. prEN 12430. Thermal insulating products for building applications. Determination of behaviour under point load
WD/DC96/105043 WD/DC96/105043. prEN ISO 15148. Building materials. Determination of water absorption coefficient (ISO/DIS 15148:1996)
DC96/123427 DC96/123427. Optics and optical instruments. Microscopes. Terms and definitions (ISO/CD 10934.2)
DC96/123430 DC96/123430. Optics and optical instruments. Stereo microscopes. Information transfer to the user (ISO/DIS 15362)
DC96/501585 DC96/501585. Gymnastic equipment. Balancing beams. Functional and safety requirements, test methods (prEN 12432)
DC96/709361 DC96/709361. prEN 12456. Cryogenic vessels. Pressure protection devices for vacuum insulated cryogenic vessels outer jackets
BS EN ISO 4135:1996 BS EN ISO 4135:1996. Anaesthesiology. Vocabulary
BS ISO 3322:1985 BS ISO 3322:1985. Fluid power systems and components. Cylinders. Nominal pressures
BS ISO 6432:1985 BS ISO 6432:1985. Pneumatic fluid power. Single rod cylinders. 10 bar (1 000 kPa) series. Bores from 8 to 25 mm. Mounting dimensions
BS AU 50-1.4.6:1996, ISO 7867-2:1996 BS AU 50-1.4.6:1996, ISO 7867-2:1996. Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Specification for service description and load ratings for m
BS M 88:1996, ISO 11242:1996 BS M 88:1996, ISO 11242:1996. Air cargo equipment. Pressure equalization requirements for cargo containers
BS M 87:1996, ISO 10841:1996 BS M 87:1996, ISO 10841:1996. Aircraft ground support equipment. Catering vehicle for large capacity aircraft. Functional requirements
BS M 89:1996, ISO 11995:1996 BS M 89:1996, ISO 11995:1996. Aircraft ground support equipment. Stability requirements for loading and servicing equipment
BS 6615:1996, ISO 8062:1994 BS 6615:1996, ISO 8062:1994. Specification for dimensional tolerances for metal and metal alloy castings
BS AU 50-1.4.5a:1996, ISO 7867-1:1996 BS AU 50-1.4.5a:1996, ISO 7867-1:1996. Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Specification for designations, dimensions, marking and ty
BS ISO 1219-2:1995 BS ISO 1219-2:1995. Fluid power systems and components. Graphic symbols and circuit diagrams. Circuit diagrams
BS ISO 10767-1:1996 BS ISO 10767-1:1996. Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components. Precision method for pumps
BS ISO 8131:1992 BS ISO 8131:1992. Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series. Tolerances
BS ISO TR 11255:1994 BS ISO TR 11255:1994. Applicability of hard cutting materials for machining by chip removal. Information additional to ISO 513 designation
BS EN ISP 12063-1:1996 BS EN ISP 12063-1:1996. Information technology. International Standardized Profiles AMH3n. Message Handling Systems. EDI Messaging. EDIMG MHS service support
BS EN ISP 12063-5:1996 BS EN ISP 12063-5:1996. Information technology. International Standardized Profiles AMH3n. Message Handling Systems. EDI Messaging. AMH34. EDIMG Requirements for enhanced MS acc
BS EN ISP 12063-3:1996 BS EN ISP 12063-3:1996. Information technology. International Standardized Profiles AMH3n. Message Handling Systems. EDI Messaging. AMH32. EDIMG Requirements for message transfe
BS EN ISP 12063-2:1996 BS EN ISP 12063-2:1996. Information technology. International Standardized Profiles AMH3n. Message Handling Systems. EDI Messaging. AMH31. EDIMG Content
BS EN ISP 12063-4:1996 BS EN ISP 12063-4:1996. Information technology. International Standardized Profiles AMH3n. Message Handling Systems. EDI Messaging. AMH33. EDIMG Requirements for MTS Access (P3)
BS EN 906:1996 BS EN 906:1996. Polyolefin agricultural twines
BS EN 1069-1:1996 BS EN 1069-1:1996. Water slides over 2 m height. Safety requirements and test methods
BS EN 1069-2:1996 BS EN 1069-2:1996. Water slides over 2 m height. Instructions
BS EN 50098-2:1996 BS EN 50098-2:1996. Customer premises cabling for information technology. 2048 kbit/s ISDN primary access and leased line network interface
DC96/123742 DC96/123742. Steel cord conveyor belts. Part 1. Design, dimensions and mechanical requirements for conveyor belts for general use (ISO/DIS 15236-1). Design, dimensions and mechanical requi
DC96/123785 DC96/123785. Plastics. Expandable-polystyrene (PS-E) moulding materials in the form of beads. Part 1. Designation system and basis for specifications (ISO/DIS 14883-1). Designation system
DC96/708509 DC96/708509. prEN 419-1/prA1. Non-domestic gas-fired overhead luminous radiant heaters. Part 1. Safety. Part 1:Safety
DC96/708510 DC96/708510. prEN 416-1/prA1. Single burner gas-fired overhead radiant tube heaters for non-domestic use. Part 1. Safety. Part 1: Safety
DC96/709416 DC96/709416. Gas cylinders. 17E taper thread for connection of valves to gas cylinders. Inspection gauges (prEN ISO 11219). Inspection gauges
BS 4680:1996 BS 4680:1996. Specification for clothes lockers
BS 7871-1:1996 BS 7871-1:1996. Pneumatic conveying. Glossary of terms
BS EN 829:1997 BS EN 829:1997. In vitro diagnostic systems. Transport packages for medical and biological specimens. Requirements, tests
BS EN 61268:1996, IEC 61268:1995 BS EN 61268:1996, IEC 61268:1995. Alternating current static var-hour meters for reactive energy (classes 2 and 3)
BS EN 60617-2:1996, IEC 60617-2:1996 BS EN 60617-2:1996, IEC 60617-2:1996. Graphical symbols for diagrams. Symbol elements, qualifying symbols and other symbols having general application
BS EN 61082-4:1996, IEC 61082-4:1996 BS EN 61082-4:1996, IEC 61082-4:1996. Preparation of documents used in electrotechnology. Location and installation documents
BS EN 988:1997 BS EN 988:1997. Zinc and zinc alloys. Specification for rolled flat products for building
BS 6200-5:1997 BS 6200-5:1997. Sampling and analysis of iron, steel and other ferrous metals. Guidelines on statistical procedures
BS QC 750114:1996, IEC 60747-8-3:1995 BS QC 750114:1996, IEC 60747-8-3:1995. Harmonized system of quality assessment for electronic components. Semiconductor devices. Discrete devices. Field-effect tr
BS ISO/IEC 8882-2:1995 BS ISO/IEC 8882-2:1995. Information technology. Telecommunications and information exchange between systems. X.25-DTE conformance testing. Data link layer conformance test suite
BS EN 683-1:1996 BS EN 683-1:1996. Aluminium and aluminium alloys. Finstock. Technical conditions for inspection and delivery
BS EN 10218-2:1997 BS EN 10218-2:1997. Steel wire and wire products. General. Wire dimensions and tolerances
DD ENV 12038:1996 DD ENV 12038:1996. Durability of wood and wood-based products. Wood-based panels. Method of test for determining the resistance against wood-destroying basidiomycetes
DD ENV 12037:1996 DD ENV 12037:1996. Wood preservatives. Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact. Horizontal lap-jo
BS EN ISO 1856:1996 BS EN ISO 1856:1996. Polymeric materials, cellular flexible. Determination of compression set
BS ISO 12635:1996 BS ISO 12635:1996. Graphic technology. Plates for offset printing. Dimensions
BS 2782-3:Method 323A:1996, ISO 6721-4:1994 BS 2782-3:Method 323A:1996, ISO 6721-4:1994. Methods of testing plastics. Mechanical properties. Tensile vibration. Non-resonance method
BS ISO 2942:1994 BS ISO 2942:1994. Hydraulic fluid power. Filter elements. Verification of fabrication integrity and determination of the first bubble point
BS ISO 6798:1995 BS ISO 6798:1995. Reciprocating internal combustion engines. Measurement of emitted airborne noise. Engineering method and survey method
BS ISO 7612:1994 BS ISO 7612:1994. Diesel engines. Base-mounted in-line fuel injection pumps. Mounting dimensions
BS ISO 8573-2:1996 BS ISO 8573-2:1996. Compressed air for general use. Test methods for aerosol oil content
BS 4401-16:1996, ISO 1841-2:1996 BS 4401-16:1996, ISO 1841-2:1996. Methods of test for meat and meat products. Determination of chloride content (potentiometric method)
BS 4401-6:1996, ISO 1841-1:1996 BS 4401-6:1996, ISO 1841-1:1996. Methods of test for meat and meat products. Determination of chloride content (Volhard method)
BS EN ISO 11214:1996 BS EN ISO 11214:1996. Modified starch. Determination of carboxyl group content of oxidized starch
BS 7890:1996 BS 7890:1996. Method for achieving good payment performance in commercial transactions
BS 667:1996 BS 667:1996. Specification for illuminance meters
96/208657DC 96/208657DC. IEC 1000-3-2. Definition of professional equipment (77A/159/CDV). Limits. Limits for harmonic current emissions (equipment input current equal to or less than 16 A per phase).
DC96/208779 DC96/208779. IEC 694:1996. Common specifications for high-voltage switchgear and controlgear standards. Non-conventional auxillary equipment (IEC document 17A/486/CD)
DC96/208868 DC96/208868. Amendment No.1 to IEC 335-2-41. Particular requirements for pumps for liquids having a temperature not exceeding 35°C (61/1054/CD). Particular requirements for pumps for liqui
DC96/643794 DC96/643794. Implementation of ISO/IEC DIS 7942-2:1996. Information technology. Computer graphics and image processing. Graphical Kernel System (GKS). Part 2. NDC metafile
DC96/709018 DC96/709018. Cycles. Specification for replacement brake blocks
DC96/710047 DC96/710047. Non-destructive testing. Terminology. Part 1. General terms
DC96/710048 DC96/710048. Non-destructive testing, Terminology. Part 2. Terms common to the non-destructive testing methods (prEN 1330-2)
BS EN 1160:1997 BS EN 1160:1997. Installations and equipment for liquefied natural gas. General characteristics of liquefied natural gas
BS EN 1334:1996 BS EN 1334:1996. Domestic furniture. Beds and mattresses. Methods of measurement and recommended tolerances
BS EN 1482:1996 BS EN 1482:1996. Sampling of solid fertilizers and liming materials
BS 192-1:1996 BS 192-1:1996. Open-ended wrenches. Metric and unified
BS 7825-2:1996 BS 7825-2:1996. Calibration of rubber and plastics test equipment. Calibration procedures
BS ISO 11533:1996 BS ISO 11533:1996. Iron ores. Determination of cobalt content. Flame atomic absorption spectrometric method
BS EN 2570:1996 BS EN 2570:1996. Nickel-cadmium batteries. Technical specification
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
