BIS Standards Catalogue
ISO5364 : 2008 EDTN4 ISO5364 : 2008 EDTN4. ISO5364 : 2008 Anaesthetic and respiratory equipment. Oropharyngeal airways
BS EN ISO 6721-2:2008 BS EN ISO 6721-2:2008. Plastics. Determination of dynamic mechanical properties. Torsion-pendulum method
ISO/IEC14476-5 : 2008 EDTN1 ISO/IEC14476-5 : 2008 EDTN1. ISO/IEC 14476-5 Information technology - Enhanced communications transport protocol. Part 5: Specification of N-plex multicast transport
08/30181037 DC 08/30181037 DC. BS EN 4656. Aerospace series. Steel FE-PM (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. B
08/30181044 DC 08/30181044 DC. BS EN 15828. Hardware for furniture. Strength and durability of hinges and their components. Stays and hinges pivoting on a horizontal axis
08/30181052 DC 08/30181052 DC. BS EN 4657. Aerospace series. Steel FE-PM (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. B
08/30181055 DC 08/30181055 DC. BS EN 4658. Aerospace series. Steel FE-PM (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. F
08/30181058 DC 08/30181058 DC. BS EN ISO 28927-5. Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 5. Drills and impact drills
08/30181062 DC 08/30181062 DC. BS EN 4659. Aerospace series. Steel FE-PM (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. F
08/30181065 DC 08/30181065 DC. BS EN 4670. Aerospace series. Steel FE-PM (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Softened. Forging stock. A or D ≤ 300 mm
08/30181068 DC 08/30181068 DC. BS EN ISO 28927-6. Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 6. Rammers
08/30181072 DC 08/30181072 DC. BS EN ISO 28927-7. Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 7. Nibblers and shears
08/30181082 DC 08/30181082 DC. BS EN ISO 28927-8. Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 8. Saws, polishing and filing machines with reciprocating acti
08/30181096 DC 08/30181096 DC. BS EN ISO 28927-9. Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 9. Scaling hammers and needle scalers
08/30181106 DC 08/30181106 DC. BS EN 4671. Aerospace series. Steel FE-PM (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. F
08/30181131 DC 08/30181131 DC. BS EN 55011 AMD. Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement
08/30181155 DC 08/30181155 DC. BS EN 4672. Aerospace series. Steel FE-PM (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Softened. Forging stock. a or D ≤ 300 mm
08/30181164 DC 08/30181164 DC. BS ISO 9867 AMD1. Textiles. Evaluation of the wrinkle recovery of fabrics. Appearance method
08/30181175 DC 08/30181175 DC. BS ISO 22089. Aerospace. Hydraulic power transfer units. General specifications
WD/ISO/IEC14496-10 : 2008 (CD) HEAD ED4 WD/ISO/IEC14496-10 : 2008 (CD) HEAD ED4. ISO/IEC 14496-10 Information technology - Coding of audio-visual objects . Part 10: Advanced video coding
08/30181228 DC 08/30181228 DC. BS EN ISO 21627-1. Plastics. Epoxy resins. Determination of chlorine content. Part 1. Inorganic chlorine
08/30181232 DC 08/30181232 DC. BS EN ISO 21627-2. Plastics. Epoxy resins. Determination of chlorine content. Part 2. Easily saponifiable chlorine
08/30181237 DC 08/30181237 DC. BS EN ISO 21627-3. Plastics. Epoxy resins. Determination of chlorine content. Part 3. Total chlorine
08/30181243 DC 08/30181243 DC. BS EN ISO 7579. Dyestuffs. Determination of solubility in organic solvents. Gravimetric and photometric methods
08/30181258 DC 08/30181258 DC. BS EN 14229. Structural timber. Wood poles for overhead lines
BS ISO 7194:2008 BS ISO 7194:2008. Measurement of fluid flow in closed conduits. Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of curre
BS ISO 3966:2008 BS ISO 3966:2008. Measurement of fluid flow in closed conduits. Velocity area method using Pitot static tubes
BS ISO/IEC 7811-6:2008 BS ISO/IEC 7811-6:2008. Identification cards. Recording technique. Magnetic stripe. High coercivity
BS ISO 3354:2008 BS ISO 3354:2008. Measurement of clean water flow in closed conduits. Velocity-area method using current-meters in full conduits and under regular flow conditions
BS ISO/IEC 7811-9:2008 BS ISO/IEC 7811-9:2008. Identification cards. Recording technique. Tactile identifier mark
CWA 15740:2008 CWA 15740:2008. Risk-based inspection and maintenance procedures for European industry (RIMAP)
08/30181295 DC 08/30181295 DC. BS ISO 5631-1. Paper and board. Determination of colour by diffuse reflectance. Part 1. Indoor daylight conditions (C/2°)
PD CLC/TR 50378-2-2:2008 PD CLC/TR 50378-2-2:2008. Passive components to be used in optical fibre communication systems. Product specifications. SC(SC2)-APC connector-type fixed optical attenuators us
08/30181362 DC 08/30181362 DC. BS EN 60384-14. Fixed capacitors for use in electronic equipment. Part 14. Sectional specification. Fixed capacitors for electromagnetic interference suppression and con
08/30181385 DC 08/30181385 DC. BS EN ISO 6721-1 AMD1. Plastics. Determination of dynamic mechanical properties. Part 1. General principles
08/30181397 DC 08/30181397 DC. BS EN 60456. Clothes washing machines for household use. Methods for measuring the performance
08/30181401 DC 08/30181401 DC. BS IEC 60747-14-1. Semiconductor devices. Part 14-1. Semiconductor sensors. Generic specification for sensors
08/30181437 DC 08/30181437 DC. BS EN 316. Wood fibreboards. Definition, classification and symbols
08/30181440 DC 08/30181440 DC. BS EN 622-4. Fibreboards. Specifications. Part 4. Requirements for softboards
08/30181443 DC 08/30181443 DC. BS EN 622-5. Fibreboards. Specifications. Part 5. Requirements for dry process boards (MDF)
08/30181446 DC 08/30181446 DC. BS EN 1069-1. Water slides. Part 1. Safety requirements and test methods
08/30181449 DC 08/30181449 DC. BS EN 1069-2. Water slides. Part 2. Instructions
08/30181461 DC 08/30181461 DC. BS EN 15830. Rough terrain variable reach trucks. Visibility. Test methods and verification
08/30181467 DC 08/30181467 DC. BS EN 15834. Refrigerating systems and heat pumps. Qualification of tightness of components and joints
08/30181473 DC 08/30181473 DC. BS EN 545. Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
08/30181476 DC 08/30181476 DC. BS EN ISO 10717. Footwear. Test method for slide fasteners. Burst strength
08/30181480 DC 08/30181480 DC. BS EN 13301. Bitumen and bituminous binders. Determination of staining tendency of bitumen
08/30181483 DC 08/30181483 DC. BS EN 13302. Bitumen and bituminous binders. Determination of viscosity of bitumen using a rotating spindle apparatus
08/30181486 DC 08/30181486 DC. BS EN ISO 10768. Footwear. Test method for the determination of the resistance of elastics for footwear to repeated extension. Fatigue resistance
08/30181490 DC 08/30181490 DC. BS EN ISO 10750. Footwear. Test method for slide fasteners. Attachment strength of end stops
08/30181494 DC 08/30181494 DC. BS EN ISO 20869. Footwear. Test methods for outsoles, insoles, lining and insocks. Water soluble content
08/30181498 DC 08/30181498 DC. BS EN 61000-5-8. Electromagnetic compatibility (EMC). Part 5-8. Installation and mitigation guidelines. HEMP protection methods for the distributed infrastructure
08/30181511 DC 08/30181511 DC. BS EN 50519. Assessment of workers' exposure to electric and magnetic fields of industrial induction heating equipment
08/30181522 DC 08/30181522 DC. BS EN 61280-1-3. Fibre optic communication subsystem basic test procedures. Part 1-3. Test procedures for general communication subsystems. Central wavelength and spectr
08/30181526 DC 08/30181526 DC. BS EN ISO 15747. Plastic containers for intravenous injections
08/30181539 DC 08/30181539 DC. BS EN ISO 12574-3. Thermal insulation. Cellulose-fibre loose-fill for horizontal applications in ventilated roof spaces. Part 3. Test methods
08/30181604 DC 08/30181604 DC. BS EN ISO 10781. Health informatics. HL7 Electronic health record system functional model, release 1
BS EN 60079-6:2007 BS EN 60079-6:2007. Explosive atmospheres. Equipment protected by oil immersion "o"
08/30181628 DC 08/30181628 DC. BS ISO/IEC 15423. Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing
08/30181631 DC 08/30181631 DC. BS IEC 60092-509. Electrical installations in ships. Part 509. Operation of electrical installations
08/30181642 DC 08/30181642 DC. BS EN 60598-2-20 ED 3. Luminaires. Part 2-20. Particular requirements. Lighting chains
08/30181649 DC 08/30181649 DC. BS EN 15837. Ethanol as a blending component for petrol. Determination of phosphorus, copper and sulfur content. Inductively coupled plasma optical emission spectrometri
08/30181655 DC 08/30181655 DC. BS EN 13001-3-1. Cranes. General design. Part 3-1. Limit states and proof of competence of steel structures
08/30181778 DC 08/30181778 DC. BS EN 15836-1. Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools. Part 1. Homogenous membranes of nominal thickness equal to or gr
08/30181781 DC 08/30181781 DC. BS EN 15836-2. Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools. Part 2. Reinforced membranes of nominal thickness equal to or gr
08/30181784 DC 08/30181784 DC. BS EN 15839. Railway applications. Testing for the acceptance of running characteristics of railway vehicles. Freight wagons. Testing of running safety under longitudina
08/30181799 DC 08/30181799 DC. BS EN 15835. Foodstuffs. Determination of ochratoxin A in cereal based foods for infants and young children. HPLC method with immunoaffinity column clean up
08/30181802 DC 08/30181802 DC. BS EN 15829. Foodstuffs. Determination of ochratoxin A in currants, raisins, sultanas, mixed dried fruit and dried figs. HPLC method with immunoaffinity column cleanup a
08/30181828 DC 08/30181828 DC. BS 5979. Code of practice for the planning, design, setting up and use of temporarily installed suspended access equipment
08/30181853 DC 08/30181853 DC. BS EN ISO 10734. Footwear. Test method for slide fasteners. Strength of slide fastener pullers
08/30181857 DC 08/30181857 DC. BS EN ISO 10748. Footwear. Test method for slide fasteners. Slider locking strength
08/30181862 DC 08/30181862 DC. BS EN ISO 10749. Footwear. Test method for slide fasteners. Resistance to damage during closure under lateral force
08/30181867 DC 08/30181867 DC. BS EN ISO 10751. Footwear. Test method for slide fasteners. Resistance to repeated opening and closing
08/30181871 DC 08/30181871 DC. BS EN ISO 10764. Footwear. Test method for slide fasteners. Lateral strength
08/30181875 DC 08/30181875 DC. BS EN ISO 10765. Footwear. Test method for the characterization of elastic materials. Tensile performance
08/30181879 DC 08/30181879 DC. BS EN ISO 17704. Footwear. Test methods for uppers, linings and insocks. Abrasion resistance
08/30181884 DC 08/30181884 DC. BS EN ISO 20868. Footwear. Test methods for insoles. Abrasion resistance
08/30181888 DC 08/30181888 DC. BS EN ISO 20877. Footwear. Test methods for whole shoe. Thermal insulation
CWA 15832:2008 CWA 15832:2008. Humanitarian mine action. Follow-on processes after the use of demining machines
CWA 15833:2008 CWA 15833:2008. Humanitarian mine action. Quality management. Quality assurance (QA) and quality control (QC) for mechanical demining
EP 400 EP 400. BSI Catalogue 2008 (CD-ROM) (one-off version)
BS ISO 12257:2008 BS ISO 12257:2008. Aerospace. Internal six-lobe drives. Metric series
08/30181966 DC 08/30181966 DC. BS ISO 13739. Petroleum products. Procedures for the transfer of bunker fuel to ships
08/30181977 DC 08/30181977 DC. BS EN ISO 9493. Geometrical product specifications (GPS). Dimensional measuring equipment: Dial test indicators (lever type). Design and metrological requirements
08/30182001 DC 08/30182001 DC. BS EN 61753-141-2. Fibre optic interconnecting devices and passive components performance standard. Part 141-2. Fibre optic passive chromatic dispersion compensator usin
08/30182018 DC 08/30182018 DC. BS EN 62133. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed secondary cells, and for batteries
08/30182033 DC 08/30182033 DC. BS 7965. Guide to the selection, installation, operation and calibration of diagonal path transit time ultrasonic flowmeters for industrial gas applications
08/30182044 DC 08/30182044 DC. BS ISO 21461 AMD1. Rubber. Determination of the aromaticity of oil in vulcanized rubber compounds
BS 8723-3:2007 BS 8723-3:2007. Structured vocabularies for information retrieval. Guide. Vocabularies other than thesauri
BS 8723-4:2007 BS 8723-4:2007. Structured vocabularies for information retrieval. Guide. Interoperability between vocabularies
08/30182090 DC 08/30182090 DC. BS EN ISO 11357-1. Plastics. Differential scanning calorimetry (DSC). Part 1. General principles
BIP 2109:2008 BIP 2109:2008. The Design, Installation, Commissioning and Maintenance of Fire Detection and Fire Alarm Systems: A Guide to BS 5839-1 (3rd edition)
08/30182133 DC 08/30182133 DC. BS ISO 2006-1. Rubber latex, synthetic. Determination of mechanical stability. Part 1. High-speed method
08/30182136 DC 08/30182136 DC. BS ISO 13399-1 AMD1. Cutting tool data representation and exchange. Part 1. Overview, fundamental principles and general information model
08/30182164 DC 08/30182164 DC. BS ISO 31000. Risk management. Principles and guidelines on implementation
08/30182181 DC 08/30182181 DC. BS EN 13263-1 AMD1. Silica fume for concrete. Part 1. Definitions, requirements and conformity criteria
08/30182184 DC 08/30182184 DC. BS EN 13263-2 AMD1. Silica fume for concrete. Part 2. Conformity evaluation
08/30182311 DC 08/30182311 DC. BS EN 15843. Water quality. Guidance standard on determining the degree of modification of river hydromorphology
08/30182314 DC 08/30182314 DC. BS EN 15841. Air quality. Ambient air. Determination of lead, nickel,arsenic and cadmium in atmospheric deposition
08/30182372 DC 08/30182372 DC. BS EN 15842. Foodstuffs. Detection of food allergens. General considerations and validation of methods
08/30182461 DC 08/30182461 DC. BS ISO 20369. Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of citrate content
08/30182464 DC 08/30182464 DC. BS ISO 20370. Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of acetate content
08/30182467 DC 08/30182467 DC. BS EN ISO 9902-1 AMD1. Textile machinery. Noise test code. Part 1. Common requirements
08/30182471 DC 08/30182471 DC. BS EN ISO 9902-2 AMD1. Textile machinery. Noise test code. Part 2. Spinning preparatory and spinning machinery
08/30182475 DC 08/30182475 DC. BS EN ISO 9902-3 AMD1. Textile machinery. Noise test code. Part 3. Nonwoven machinery
08/30182479 DC 08/30182479 DC. BS EN ISO 9902-4 AMD1. Textile machinery. Noise test code. Part 4. Yarn processing, cordage and rope manufacturing machinery
08/30182483 DC 08/30182483 DC. BS EN ISO 9902-5 AMD1. Textile machinery. Noise test code. Part 5. Weaving and knitting preparatory machinery
08/30182487 DC 08/30182487 DC. BS EN ISO 9902-6 AMD1. Textile machinery. Noise test code. Part 6. Fabric manufacturing machinery
08/30182501 DC 08/30182501 DC. BS EN 61850-7-1. Communication networks and systems for power utility automation. Part 7-1. Basic communication structure. Principles and models
ISO/IEC16512-2 : 2008 EDTN1 ISO/IEC16512-2 : 2008 EDTN1. ISO/IEC16512-2 : 2008 Information technology – Relayed multicast protocol:. Part 2: Specification for simplex group applications
HB 10194:2008 HB 10194:2008. Code of Practice for In-Service Inspection and Testing of Electrical Equipment - 3rd Edition
08/30182517 DC 08/30182517 DC. BS ISO 16063-31. Methods for the calibration of vibration and shock transducers. Part 31. Testing of transverse vibration sensitivity
NA to BS EN 1991-2:2003 NA to BS EN 1991-2:2003. UK National Annex to Eurocode 1. Actions on structures. Traffic loads on bridges
08/30182556 DC 08/30182556 DC. BS EN 62153-4-11. Metallic communication cable test methods. Part 4-11. Electromagnetic Compatibility (EMC). Coupling attenuation or screening attenuation of patch cords
08/30182560 DC 08/30182560 DC. BS EN 62153-4-12. Metallic communication cable test methods. Part 4-12. Electromagnetic Compatibility (EMC). Coupling attenuation or screening attenuation of connecting
08/30182564 DC 08/30182564 DC. BS EN 62153-4-13. Metallic communication cable test methods. Part 4-13. Electromagnetic Compatibility (EMC). Coupling attenuation of links and channels (Laboratory condi
08/30182579 DC 08/30182579 DC. BS EN ISO 11111-1 AMD1. Textile machinery. Safety requirements. Part 1. Common requirements
08/30182583 DC 08/30182583 DC. BS EN ISO 11111-2 AMD1. Textile machinery. Safety requirements. Part 2. Spinning preparatory and spinning machines
08/30182587 DC 08/30182587 DC. BS ISO/IEC 15938-3 AMD3. Information technology. Multimedia content description interface. Part 3. Visual
08/30182589 DC 08/30182589 DC. BS EN ISO 11111-3 AMD1. Textile machinery. Safety requirements. Part 3. Nonwoven machinery
08/30182593 DC 08/30182593 DC. BS EN ISO 11111-4 AMD1. Textile machinery. Safety requirements. Part 4. Yarn processing, cordage and rope manufacturing machinery
08/30182597 DC 08/30182597 DC. BS EN ISO 11111-5 AMD1. Textile machinery. Safety requirements. Part 5. Preparatory machinery to weaving and knitting
08/30182601 DC 08/30182601 DC. BS EN ISO 11111-6 AMD1. Textile machinery. Safety requirements. Part 6. Fabric manufacturing machinery
08/30182605 DC 08/30182605 DC. BS EN ISO 11111-7 AMD1. Textile machinery. Safety requirements. Part 7. Dyeing and finishing machinery
08/30182672 DC 08/30182672 DC. BS EN 60034-1. Rotating electrical machines. Part 1. Rating and performance
08/30182686 DC 08/30182686 DC. BS ISO 4251-4. Tyres (ply rating marked series) and rims for agricultural tractors and machines. Part 4. Tyre classification and nomenclature
08/30182689 DC 08/30182689 DC. BS EN 60071-1 AMD1. Insulation co-ordination. Part 1. Definitions, principles and rules
08/30182693 DC 08/30182693 DC. BS ISO 11053. Animal and vegetable fats and oils. Determination of cocoa butter equivalents in milk chocolate
08/30182696 DC 08/30182696 DC. BS ISO 11795 AMD1. Agricultural tractor drive wheel tyres. Method of measuring tyre rolling circumference
DD ISO/TS 13473-4:2008 DD ISO/TS 13473-4:2008. Characterization of pavement texture by use of surface profiles. Spectral analysis of texture profiles
ISO/IEC23002-2:2008 EDTN1 CDROM ISO/IEC23002-2:2008 EDTN1 CDROM. ISO/IEC23002-2 : 2008 Information technology. MPEG video technologies. Part 2. Fixed-point 8×8 inverse discrete cosine transform and di
08/30182737 DC 08/30182737 DC. BS ISO/IEC 23004-8. Information technology. Multimedia middleware. Part 8. Reference software
08/30182780 DC 08/30182780 DC. BS EN 12520. Furniture. Strength, durability and safety. Requirements for domestic seating
08/30182786 DC 08/30182786 DC. BS EN 13977. Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance
08/30182823 DC 08/30182823 DC. BS ISO/IEC 13250-5. Information technology. Document description and processing languages. Topic maps. Part 5. Reference model
ISO11193-1 : 2008 EDTN2 ISO11193-1 : 2008 EDTN2. ISO11193-1 : 2008 Single-use medical examination gloves. Part 1. Specification for gloves made from rubber latex or rubber solution
08/30182897 DC 08/30182897 DC. BS ISO 1927-1. Unshaped refractory materials. Part 1. Introduction and classification
08/30182971 DC 08/30182971 DC. BS ISO 6472. Rubber compounding ingredients. Symbols and abbreviated terms
ISO20632 : 2008 EDTN1 ISO20632 : 2008 EDTN1. ISO 20632 Reaction-to-fire tests - Small room test for pipe insulation products or systems
08/30183028 DC 08/30183028 DC. BS ISO 6469-1. Electric road vehicles. Safety specifications. Part 1. On-board rechargeable energy storage system (RESS)
08/30183031 DC 08/30183031 DC. BS ISO 6469-2. Electric road vehicles. Safety specifications. Part 2. Vehicle operational safety means and protection against failures
08/30183041 DC 08/30183041 DC. BS EN 61000-3-12. Electromagnetic compatibility (EMC). Part 3-12. Limits. Limits for harmonic currents produced by equipment connected to public low voltage systems with
08/30183047 DC 08/30183047 DC. BS ISO 3949. Plastics hoses and hose assemblies. Textile-reinforced types for hydraulic applications. Specification
08/30183108 DC 08/30183108 DC. BS IEC/TS 60034-31. Rotating electrical machines. Part 31. Guide for the selection and application of energy-efficient motors including variable-speed applications
08/30183116 DC 08/30183116 DC. BS EN 459-1. Building lime. Part 1. Definitions, specifications and conformity criteria
08/30183119 DC 08/30183119 DC. BS EN 459-2. Building lime. Part 2. Test methods
08/30183128 DC 08/30183128 DC. BS EN 15845. Paper and board. Determination of the cytotoxicity of aqueous extracts
08/30183131 DC 08/30183131 DC. BS EN 1313-1. Round and sawn timber. Permitted deviations and preferred sizes. Part 1. Softwood sawn timber
08/30183136 DC 08/30183136 DC. BS EN 62384 AMD1. D.C. or A.C. supplied electronic control gear for LED modules. Performance requirements
08/30183151 DC 08/30183151 DC. BS EN 60669-2-1 AMD11. Switches for household and similar fixed electrical installations. Part 2-1. Particular requirements. Electronic switches
08/30183157 DC 08/30183157 DC. BS IEC/TS 62504. Terms and definitions for LEDs and LED modules in general lighting
08/30183161 DC 08/30183161 DC. BS EN 60670-1 AMD1. Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 1. General requirements
08/30183218 DC 08/30183218 DC. BS EN 50416 AMD1. Household and similar electrical appliances. Safety. Particular requirements for commercial electric conveyor dishwashing machines
08/30183222 DC 08/30183222 DC. BS ISO/IEC 13818-4 AMD3. Information technology. Generic coding of moving pictures and associated audio information. Part 4. Conformance testing
08/30183252 DC 08/30183252 DC. BS ISO 11363-1. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders. Part 1. Specifications
08/30183256 DC 08/30183256 DC. BS ISO 11363-2. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders. Part 2. Inspection gauges
08/30183262 DC 08/30183262 DC. BS EN 60335-2-58 AMD. Household and similar electrical appliances. Safety. Part 2-58. Particular requirements for commercial electric dishwashing machines
08/30183266 DC 08/30183266 DC. BS EN 60335-2-58 AMD. Household and similar electrical appliances. Safety. Part 2-58. Particular requirements for commercial electric dishwashing machines
08/30183284 DC 08/30183284 DC. BS ISO 10241-2. Terminological entries in standards. Part 2. Introduction of international terminology standards into different environments
08/30183287 DC 08/30183287 DC. BS ISO 12625-12. Tissue paper and tissue products. Part 12. Determination of tensile strength of perforated lines. Calculation of perforation efficiency
08/30183296 DC 08/30183296 DC. BS ISO/IEC 23000-4 AMD1. Information technology. Multimedia application format (MPEG-A). Part 4. Musical slide show application format
08/30183343 DC 08/30183343 DC. BS EN 257. Mechanical thermostats for gas-burning appliances
08/30183361 DC 08/30183361 DC. BS EN 50524. Data sheet and name plate for photovoltaic inverters
ISO/IEC14776-223 : 2008 EDTN1 ISO/IEC14776-223 : 2008 EDTN1. ISO/IEC14776-223 : 2008 Information technology. Small computer system interface (SCSI). Part 223. Fibre channel protocol, third version (FC
ISO/IEC14543-4-1 : 2008 EDTN1 ISO/IEC14543-4-1 : 2008 EDTN1. ISO/IEC14543-4-1 : 2008 Information technology. Home electronic system (HES) architecture. Part 4-1. Communication layers. Application laye
ISO/IEC14543-4-2 : 2008 EDTN1 ISO/IEC14543-4-2 : 2008 EDTN1. ISO/IEC14543-4-2 : 2008 Information technology. Home electronic system (HES) architecture. Part 4-2. Communication layers. Transport, netwo
08/30183388 DC 08/30183388 DC. BS EN 60974-11. Arc welding equipment. Part 11. Electrode holders
08/30183419 DC 08/30183419 DC. BS EN 62576. Electric double-layer capacitors for use in hybrid electric vehicles. Test methods for electrical characteristics
08/30183463 DC 08/30183463 DC. BS EN 15848. Water conditioning equipment inside buildings. Adjustable chemical dosing systems. Requirements for performance, safety and testing
08/30183518 DC 08/30183518 DC. BS EN 61000-4-3 AMD. Electromagnetic compatibility (EMC). Part 4-3. Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test. I
08/30183534 DC 08/30183534 DC. BS EN 61000-4-6 AMD. Electromagnetic compatibility (EMC). Part 4-6. Testing and measurement techniques. Immunity to conducted disturbances, induced by radio- frequency f
08/30183539 DC 08/30183539 DC. BS ISO 1825. Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification
08/30183566 DC 08/30183566 DC. BS ISO 11148-3. Hand-held non-electric power tools. Safety requirements. Part 3. Drills and tappers
08/30183591 DC 08/30183591 DC. BS ISO/IEC 23000-6. Information technology. Multimedia application format (MPEG-A). Part 6. Professional archival application format
08/30183593DC 08/30183593DC. BS ISO/IEC 23000-7 AMD1. Information technology. Multimedia application format (MPEG-A). Part 7. Open acces application format
08/30183606 DC 08/30183606 DC. BS EN 60335-2-109. Household and similar electrical appliances. Safety. Part 2-109. Particular requirements for UV radiation water treatment appliances
08/30183612 DC 08/30183612 DC. BS ISO 7612. Diesel engines. Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions
08/30183661 DC 08/30183661 DC. BS ISO 29473. Fire tests. Uncertainty of measurements in fire tests
08/30183769 DC 08/30183769 DC. BS EN 61340-4-6. Electrostatics. Part 4-6. Standard test methods for specific applications. Wrist straps
08/30183777 DC 08/30183777 DC. BS IEC 61340-4-8. Electrostatics. Part 4-8. Standard test methods for specific applications. Discharge shielding. Bags
08/30183784 DC 08/30183784 DC. BS ISO/IEC 20926. Software and systems engineering. Software measurement. IFPUG functional size measurement method 2009
08/30183795 DC 08/30183795 DC. BS EN 62271-106. High-voltage switchgear and controlgear. Part 106. Alternating current contactors, contactor-based controllers and contactor-based motor-starters
CWA 15846:2008 CWA 15846:2008. Measuring method for dynamic compactness and bearing capacity with SP-LFWD (small-plate light falling weight deflectometer)
CWA 15847:2008 CWA 15847:2008. Innovation, coordination and collaboration in service driven manufacturing supply chains. Reference model for industrial services
08/30183804 DC 08/30183804 DC. BS EN 50206-2. Railway applications. Rolling stock. Pantographs. Characteristics and tests. Part 2. Pantographs for metros and light rail vehicles
08/30183807 DC 08/30183807 DC. BS EN 50206-1. Railway applications. Rolling stock. Pantographs. Characteristics and tests. Part 1. Pantographs for main line vehicles
08/30183838 DC 08/30183838 DC. BS EN ISO 11148-4. Hand-held non-electric power tools. Safety requirements. Part 4. Non-rotary percussive power tools
08/30183842 DC 08/30183842 DC. BS EN ISO 11148-6. Hand-held non-electric power tools. Safety requirements. Part 6. Assembly power tools for threaded fasteners
08/30183846 DC 08/30183846 DC. BS EN 14078. Liquid petroleum products. Determination of fatty methyl ester (FAME) content in middle distillates. Infrared spectrometry method
08/30183852 DC 08/30183852 DC. BS EN 1106. Manually operated taps for gas burning appliances
08/30183861 DC 08/30183861 DC. BS EN 13732. Food processing machinery. Bulk milk coolers on farm. Requirements for performance, safety and hygiene
08/30183867 DC 08/30183867 DC. BS EN 13141-7. Ventilation for buildings. Performance testing of components/products for residential ventilation. Part 7. Performance testing of a mechanical supply and
08/30183870 DC 08/30183870 DC. BS EN 15304. Determination of the freeze-thaw resistance of autoclaved aerated concrete
08/30183873 DC 08/30183873 DC. BS EN 1007-5. Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Part 5. Determination of distribution of tensile strength and of tensi
08/30183878 DC 08/30183878 DC. BS EN 13507. Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying
BS EN 60601-1-6:2007 BS EN 60601-1-6:2007. Medical electrical equipment. General requirements for basic safety and essential Performance. Collateral standard. Usability
08/30183905 DC 08/30183905 DC. BS ISO/IEC 14496-4 AMD35. Information technology. Coding of audio-visual objects. Part 4. Conformance testing
BS EN 15333-1:2008 BS EN 15333-1:2008. Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatus. Demand apparatus
08/30183914 DC 08/30183914 DC. BS EN 60358-1. Coupling capacitors and capacitor dividers. Part 1. Common clauses
08/30183918 DC 08/30183918 DC. BS EN 603335-2-14 AMD. Household and similar electrical appliances. Safety. Part 2-14. Particular requirements for kitchen machines
08/30183921 DC 08/30183921 DC. BS EN 603335-2-97 AMD. Household and similar electrical appliances. Safety. Part 2-97. Particular requirements for drives for rolling shutters, awnings, blinds and simil
CWA 15849:2008 CWA 15849:2008. Coding of information and traceability of human tissues and cells
08/30183936 DC 08/30183936 DC. BS EN 61987-10. Industrial-process measurement and control. Data structures and element process equipment catalogues. Part 10. Lists of properties (LOPs) for industrial-
08/30183974 DC 08/30183974 DC. BS EN 31010. Risk management. Risk assessment techniques
08/30184135 DC 08/30184135 DC. BS 7863. Recommendations for colour coding to indicate the extinguishing media contained in portable fire extinguishers
BIP 3083:2008 BIP 3083:2008. BS EN 980:2008. Graphical symbols for use in the labelling of medical devices CD-ROM
BS EN ISO 5801:2008, BS 848-1:2007 BS EN ISO 5801:2008, BS 848-1:2007. Industrial fans. Performance testing using standardized airways
08/30184166 DC 08/30184166 DC. BS ISO 8143. Thermal insulation products for building equipment and industrial installations. Calcium silicate products
08/30184169 DC 08/30184169 DC. BS EN 61243-3. Live working. Voltage detectors. Part 3. Two-pole low-voltage type
08/30184178 DC 08/30184178 DC. BS EN 61400-25-6. Wind turbines. Part 25-6. Communications for monitoring and control of wind power plants. Logical node classes and data classes for condition monitorin
08/30184193 DC 08/30184193 DC. BS ISO 29803. Thermal insulation products for building applications. Determination of the resistance to impact of external thermal insulation composite systems (ETICS)
08/30184196 DC 08/30184196 DC. BS ISO 29804. Thermal insulation products for building applications. Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insul
08/30184200 DC 08/30184200 DC. BS ISO 29805. Thermal insulation products for building applications. Determination of the mechanical properties of glass fibre meshes
08/30184210 DC 08/30184210 DC. BS EN ISO 81714-1. Design of graphical symbols for use in the technical documentation of products. Part 1. Basic rules
BIP 0102:2008 BIP 0102:2008. Implementing ISO/IEC 20000 Certification: The Roadmap
BIP 0101:2008 BIP 0101:2008. ISO/IEC 20000: An Introduction
08/30184268 DC 08/30184268 DC. BS EN 15649-4. Floating leisure articles for use on and in the water. Part 4. Additional specific safety requirements and test methods for Class B devices
08/30184277 DC 08/30184277 DC. BS EN 12561-1. Railway applications. Tank wagons. Part 1. Identification plates for tank wagons for the carriage of dangerous goods
08/30184280 DC 08/30184280 DC. BS EN 12561-3. Railway applications. Tank wagons. Part 3. Bottom filling and emptying devices for gases liquefied under pressure
08/30184283 DC 08/30184283 DC. BS EN 12561-4. Railway applications. Tank wagons. Part 4. Top devices for top emptying and filling of liquid products
08/30184286 DC 08/30184286 DC. BS EN 12561-5. Railway applications. Tank wagons. Part 5. Top devices for bottom emptying and top filling of liquid products
08/30184289 DC 08/30184289 DC. BS EN 12561-6. Railway applications. Tank wagons. Part 6. Manholes
08/30184292 DC 08/30184292 DC. BS EN 12561-7. Railway applications. Tank wagons. Part 7. Platforms and ladders
08/30184296 DC 08/30184296 DC. BS EN 12561-8. Railway applications. Tank wagons. Part 8. Heating connections
08/30184300 DC 08/30184300 DC. BS EN 12952-2. Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories
08/30184303 DC 08/30184303 DC. BS EN 12952-3. Water-tube boilers and auxiliary installations. Part 3. Design and calculation for pressure parts
08/30184309 DC 08/30184309 DC. BS EN 12952-5. Water-tube boilers and auxiliary installations. Part 5. Workmanship and construction of pressure parts of the boiler
08/30184312 DC 08/30184312 DC. BS EN 12952-6. Water-tube boilers and auxiliary installations. Part 6. Inspection during construction; documentation and marking of pressure parts of the boiler
08/30184338 DC 08/30184338 DC. BS ISO/IEC 23000-11. Information technology. Multimedia application format (MPEG-A). Part 11. Stereoscopic video application format
08/30184343 DC 08/30184343 DC. BS ISO/IEC 19763-3. Information technology. Metamodel framework for interoperability (MFI). Part 3. Metamodel for ontology registration
PD 156865:2008 PD 156865:2008. Standardized method of life cycle costing for construction procurement. A supplement to BS ISO 15686-5. Buildings and constructed assets. Service life planning. Life cyc
08/30184354 DC 08/30184354 DC. BS ISO/IEC 23001-4. Information technology. MPEG systems technologies. Part 4. Codec configuration representation
08/30184355 DC 08/30184355 DC. BS ISO/IEC 23002-4. Information technology. MPEG video technologies. Part 4. Video tool library
08/30184395 DC 08/30184395 DC. BS ISO 8894-1. Refractory materials. Determination of thermal conductivity. Part 1. Hot-wire (cross-array) and resistance thermometer methods
08/30184405 DC 08/30184405 DC. BS EN 62532. Fluorescent induction lamps. Safety requirements
08/30184415 DC 08/30184415 DC. BS EN 60851-5 AMD1. Winding wires. Test methods. Part 5. Electrical properties
08/30184419 DC 08/30184419 DC. BS EN 60851-1 AMD2. Winding wires. Test methods. Part 1. General
08/30184486 DC 08/30184486 DC. BS EN ISO 1135-4. Transfusion equipment for medical use. Part 4. Transfusion sets for single use
BS EN 60534-9:2007 BS EN 60534-9:2007. Industrial-process control valves. Test procedure for response measurements from step inputs
08/30184522 DC 08/30184522 DC. BS ISO 2129. Geometrical Product Specifications (GPS). Indication of dimensions and tolerances. Mechanical engineering drawings
08/30184542 DC 08/30184542 DC. BS EN 3155-076. Aerospace series. Electrical contacts used in elements of connection. Part 076. Contacts, electrical, male, type A, crimp, class R. Product standard
08/30184545 DC 08/30184545 DC. BS EN 3155-077. Aerospace series. Electrical contacts used in elements of connection. Part 077. Contacts, electrical, female, type A, crimp, class R. Product standard
08/30184548 DC 08/30184548 DC. BS EN 6049-002. Aerospace series. Electrical cables, installation. Protection sleeves in meta-aramid fibres. Part 002. General and list of product standard
08/30184551 DC 08/30184551 DC. BS EN 50329 AMD1. Railway applications. Fixed installations. Traction transformers
08/30184557 DC 08/30184557 DC. BS EN 62271-111. High-voltage switchgear and controlgear. Part 111. Pad-mounted, dry vault, and submersible automatic circuit reclosers and fault interrupters for altern
08/30184562 DC 08/30184562 DC. BS EN 62271-103. High-voltage switchgear and controlgear. Part 103. Switches for rated voltages above 1 kV up to and including 52 kV
08/30184566 DC 08/30184566 DC. BS ISO 21931-1. Sustainability in building construction. Framework for methods of assessment for environmental performance of construction works. Part 1. Buildings
08/30184575 DC 08/30184575 DC. BS EN ISO 787-7. General methods of test for pigments and extenders. Part 7. Determination of residue on sieve. Water method. Manual procedure
08/30184583 DC 08/30184583 DC. BS IEC/TS 60034-18-32. Rotating electrical machines. Part 18-32. Functional evaluation of insulation systems. Test procedures for form-wound windings. Electrical evaluat
08/30184585 DC 08/30184585 DC. BS EN ISO 3924. Petroleum products. Determination of boiling range distribution. Gas chromatography method
08/30184602 DC 08/30184602 DC. BS EN 1639. Dentistry. Medical devices for dentistry. Instruments
08/30184608 DC 08/30184608 DC. BS EN 1640. Dentistry. Medical devices for dentistry. Equipment
08/30184612 DC 08/30184612 DC. BS EN 1641. Dentistry. Medical devices for dentistry. Materials
08/30184615 DC 08/30184615 DC. BS EN 1642. Dentistry. Medical devices for dentistry. Dental implants
08/30184618 DC 08/30184618 DC. BS EN 1824. Road marking materials. Road trials
08/30184621 DC 08/30184621 DC. BS EN 1423. Road marking materials. Drops on materials. Glass beads, antiskid aggregates and mixtures of the two
08/30184624 DC 08/30184624 DC. BS EN 13197. Road marking materials. Wear simulator. Turntable
08/30184627 DC 08/30184627 DC. BS EN 13459. Road marking materials. Sampling from storage and testing
08/30184630 DC 08/30184630 DC. BS EN 12802. Road marking materials. Laboratory methods for identification
08/30184633 DC 08/30184633 DC. BS EN 1871. Road marking materials. Laboratory methods for identification
08/30184636 DC 08/30184636 DC. BS EN 1790. Road marking materials. Preformed road markings
08/30184639 DC 08/30184639 DC. BS EN 13212. Road marking materials. Requirements for factory production control
08/30184645 DC 08/30184645 DC. BS EN 15860. Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods
08/30184648 DC 08/30184648 DC. BS EN 15859. Air quality. Certification of automated dust arrestment plant monitors for use on stationary sources. Performance criteria and test procedures
08/30184667 DC 08/30184667 DC. BS EN ISO 2062. Textiles. Yarns from packages. Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
08/30184727 DC 08/30184727 DC. BS ISO 6145-5. Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Part 5. Capillary calibration devices
08/30184746 DC 08/30184746 DC. BS ISO 22199. Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Emission
BS EN 15285:2008 BS EN 15285:2008. Agglomerated stone. Modular tiles for flooring and stairs (internal and external)
08/30184758 DC 08/30184758 DC. BS EN 378-1 AMD1. Refrigerating systems and heat pumps. Safety and environmental requirements. Part 1. Basic requirements, definitions, classification and selection crit
08/30184762 DC 08/30184762 DC. BS EN 61300-2-24. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-24. Tests. Screen testing of ceramic alignmen
08/30184786 DC 08/30184786 DC. BS ISO/IEC 26513. Software and systems engineering. Requirements for assessors and testers of user documentation
08/30184911 DC 08/30184911 DC. BS EN 62365. Digital audio. Digital input-output interfacing. Transmission of digital audio over asynchronous transfer mode (ATM) networks
08/30184920 DC 08/30184920 DC. BS EN 60034-18-31. Rotating electrical machines. Part 18-31. Functional evaluation of insulation systems. Test procedures for form-wound windings. Thermal evaluation and
08/30184950 DC 08/30184950 DC. BS EN 50291-1. Electrical apparatus for the detection of carbon monoxide in domestic premises. Part 1. Test methods and performance requirements
ISO/IEC24767-1 : 2008 EDTN1 ISO/IEC24767-1 : 2008 EDTN1. ISO/IEC 24767-1 Information technology. Home network security . Security requirements
08/30185056 DC 08/30185056 DC. BS EN 15861. Food processing machinery. Smoke facilities. Safety and hygiene requirements
BS EN 13834:2007+A1:2009 BS EN 13834:2007+A1:2009. Cookware. Ovenware for use in traditional domestic ovens
08/30185105 DC 08/30185105 DC. BS EN 50377-15-1. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 15-1. Type MPO with PPS ferr
08/30185108 DC 08/30185108 DC. BS EN 4604-008. Aerospace series. Cable, electrical, for signal transmission. Part 008. Cable, coaxial, 50 ohms, 200$OD, Type WD. Product standard
08/30185130 DC 08/30185130 DC. BS EN 60061. Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1. Lamp caps. Amendment 42. Part 2. Lampholders. Amendment
08/30185179 DC 08/30185179 DC. BS EN 4673-001. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Part 001. Installation and removal procedure
08/30185184 DC 08/30185184 DC. BS EN 4673-002. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Part 002. Design standard
08/30185221 DC 08/30185221 DC. BS ISO 8811. Earth-moving machinery. Rollers and land-fill compactors. Terminology and commercial specifications
08/30185224 DC 08/30185224 DC. BS EN 4673-004. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Part 004. In heat resisting nickel base alloy Ni-P101HT (WASPALOY), silve
08/30185229 DC 08/30185229 DC. BS EN ISO 25745-1. Energy performance of lifts and escalators. Part 1. Energy measurement and conformance
08/30185233 DC 08/30185233 DC. BS EN 4673-005. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Part 005. In heat resisting nickel base alloy Ni-P101HT (WASPALOY), silve
08/30185236 DC 08/30185236 DC. BS EN 4673-006. Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Part 006. In heat resisting steel FE-PA2601 (A286), MoS2 coated
ISO/IEC10646 AMD4 (07/08) (CD-ROM)HEADER ISO/IEC10646 AMD4 (07/08) (CD-ROM)HEADER. ISO/IEC 10646 Information technology - Universal Multiple-Octet Coded Character Set (UCS)
08/30185258 DC 08/30185258 DC. BS EN 60269-5. Low-voltage fuses. Part 5. Guidance for the application of low-voltage fuses
08/30185263 DC 08/30185263 DC. BS EN 62271-102 AMD1. High-voltage switchgear and controlgear. Part 102. Alternating current disconnectors and earthing switches
08/30185288 DC 08/30185288 DC. BS ISO/IEC 22535. Information technology. Telecommunications and information exchange between systems. Corporate telecommunication networks. Tunnelling of QSIG over SIP
08/30185299 DC 08/30185299 DC. BS EN 6049-006. Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Part 006. Self-wrapping protective sleeve, flexible post inst
08/30185306 DC 08/30185306 DC. BS ISO 17386. Transport information and control systems. Manoeuvring aids for low speed operation (MALSO). Performance requirements and test procedures
08/30185313 DC 08/30185313 DC. BS ISO 15622. Transport information and control systems. Adaptive cruise control systems. Performance requirements and test procedures
08/30185354 DC 08/30185354 DC. BS IEC CISPR 35. Electromagnetic Compatibility (EMC). Immunity standard for multimedia products
BS EN 62246-2:2008 BS EN 62246-2:2008. Reed contact units. Heavy-duty reed switches
08/30185468 DC 08/30185468 DC. BS ISO/IEC 20926. Software and systems engineering. Software measurement. IFPUG functional size measurement method 2009
08/30185535 DC 08/30185535 DC. BS EN ISO 1452-1. Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC
08/30185588 DC 08/30185588 DC. BS ISO 8153-1. Aerospace. Fluid systems and components. Part 1. Terminology of hose assemblies
08/30185600 DC 08/30185600 DC. BS ISO 10643. Dimensions of accessories for cutting tools and their attachments
08/30185641 DC 08/30185641 DC. BS EN 60728-1-2. Cable networks for television signals, sound signals and interactive services. Part 1-2. Performance requirements for signals delivered at the system ou
08/30185684 DC 08/30185684 DC. BS EN ISO 10360-7. Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 7. CMMs equipped with imag
08/30185685 DC 08/30185685 DC. BS EN 9300-100. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Part 100. Common concepts for Long term archiv
08/30185688 DC 08/30185688 DC. BS EN 9300-110. Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data. Part 110. CAD mechanical 3D Explicit geometry
08/30185691 DC 08/30185691 DC. BS EN 9300-007. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Part 007. Terms and References
08/30185694 DC 08/30185694 DC. BS EN 9300-005. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Part 005. Authentication and Verification
08/30185697 DC 08/30185697 DC. BS EN 9300-002. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Part 002. Requirements
08/30185700 DC 08/30185700 DC. BS EN 9300-115. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. Part 115. Explicit CAD assembly structure
08/30185727 DC 08/30185727 DC. BS EN ISO 14344. Welding and allied processes. Flux and gas shielded electrical welding processes. Procurement guidelines for consumables
08/30185776 DC 08/30185776 DC. BS EN 1317-5 AMD2. Road restraint systems. Part 5. Product requirements and evaluation of conformity for vehicle restraint systems
08/30185866 DC 08/30185866 DC. BS EN 61000-3-15. Electromagnetic compatibility (EMC). Part 3-15. Limits. Assessment of low frequency electromagnetic immunity and emission requirements for dispersed ge
08/30186160 DC 08/30186160 DC. BS EN 3719. Aerospace series. Aluminium or aluminium alloy conductors for electrical cables. Product standard
08/30186163 DC 08/30186163 DC. BS IEC 60092-306. Electrical installations in ships. Part 306. Equipment. Luminaires and lighting accessories
08/30186166 DC 08/30186166 DC. BS EN 62275. Cable management systems. Cable ties for electrical installations
08/30186184 DC 08/30186184 DC. BS EN 61340-4-9. Electroststics. Part 4-9. Standard test methods for specific applications. Garments
KIT 200 KIT 200. Standardized method of life cycle costing for construction (BS ISO 15686-5)
08/30186234 DC 08/30186234 DC. BS ISO 19111-2. Geographic information. Spatial referencing by coordinates. Part 2. Extension for parametric values
08/30186244 DC 08/30186244 DC. BS ISO 12188-1. Test procedure for positioning and guidance systems in agriculture. Part 1. Dynamic testing of satellite-based positioning devices
08/30186256 DC 08/30186256 DC. BS ISO 12871. Determination of aliphatic alcohols content by capillary gas chromatography
08/30186264 DC 08/30186264 DC. BS ISO 12872. Method for the determination of the percentage of 2-glyceryl monopalmitate in olive oils
08/30186267 DC 08/30186267 DC. BS ISO 12873. Determination of wax content in olive oils by capillary column gas chromatography
08/30186279 DC 08/30186279 DC. BS EN 50436-3. Alcohol interlocks. Test methods and performance requirements. Part 3. Guidance for decision makers, purchasers and users
08/30186371 DC 08/30186371 DC. BS 88-2 AMD1. Low-voltage fuses. Part 2. Supplementary requirements for fuses for use by authorised persons (fuses mainly for industrial application). Examples of standa
08/30186375 DC 08/30186375 DC. BS 88-3 AMD1. Low-voltage fuses. Part 3. Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar application). Examples
08/30186393 DC 08/30186393 DC. BS ISO/IEC 15444-1 AMD2. Information technology. JPEG 2000 image coding. Part 1. Core coding system
08/30186436 DC 08/30186436 DC. BS EN 15869-1. Inland navigation vessels. Electrical shore connection, three-phase current 400 V, up to 32 A, 50 Hz. Part 1. General requirements
08/30186439 DC 08/30186439 DC. BS EN 15869-2. Inland navigation vessels. Electrical shore connection, three-phase current 400 V, up to 32 A, 50 Hz. Part 2. Onshore unit, safety requirements
08/30186443 DC 08/30186443 DC. BS EN 15869-3. Inland navigation vessels. Electrical Shore connection, three-phase current 400 V, up to 32 A, 50 Hz. Part 3. On-board unit, safety requirements
08/30186575 DC 08/30186575 DC. BS EN 60079-15. Explosive atmospheres. Part 15. Equipment protection by type of protection "n"
08/30186692 DC 08/30186692 DC. BS ISO 24610-2. Language resource management. Feature structures. Part 2. Feature system declaration
08/30186704 DC 08/30186704 DC. BS EN 61851-1. Electric vehicle conductive charging system. Part 1. General requirements
08/30186708 DC 08/30186708 DC. BS EN 62496-3-1. Optical circuit boards. Performance standard. Part 3-1. Flexible optical circuit boards using unconnectorized optical glass fibres
08/30186712 DC 08/30186712 DC. BS EN 60255-127. Measuring relays and protection equipment. Part 127. Functional standard for over/under voltage protection
ISO/PAS17005 : 2008 EDTN1 ISO/PAS17005 : 2008 EDTN1. ISO/PAS17005 : 2008 Conformity assessment. Use of management systems. Principles and requirements
08/30186847 DC 08/30186847 DC. BS ISO 23232. Textiles. Aqueous liquid repellency. Water/alcohol solution resistance test
08/30186852 DC 08/30186852 DC. BS EN ISO 4413. Hydraulic fluid power. General rules and safety requirements for systems and their components
08/30186863 DC 08/30186863 DC. BS EN ISO 4414. Pneumatic fluid power. General rules and safety requirements for systems and their components
08/30186871 DC 08/30186871 DC. BS EN ISO 105-B08 AMD1. Textiles. Tests for colour fastness. Part B08. Quality control of blue wool reference materials 1 to 7
BS 6297:2007+A1:2008 BS 6297:2007+A1:2008. Code of practice for the design and installation of drainage fields for use in wastewater treatment
BS 7835:2007 BS 7835:2007. Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV having low emission of smoke and corrosive gases when affected
08/30186909 DC 08/30186909 DC. BS EN 255-3. Air conditioners. Liquid chilling packages and heat pumps with electrically driven compressors. Heating mode. Part 3. Testing and requirements for marking f
08/30186919 DC 08/30186919 DC. BS ISO 10298. Determination of toxicity of a gas or gas mixture
08/30186944 DC 08/30186944 DC. BS EN 12269-2. Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test. Part 2. Long term test
PAS 126-2:2008 PAS 126-2:2008. Furniture removal activities. Commercial moving. Provision of the service
08/30187017 DC 08/30187017 DC. BS EN 60851-2. Winding wires. Test methods. Part 2. Determination of dimensions
08/30187038 DC 08/30187038 DC. BS EN 55016-2-3 AMD1. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-3. Methods of measurement of disturbances and immunity. Ra
PAS 55-2:2008 PAS 55-2:2008. Asset management. Guidelines for the application of PAS 55-1
CWA 15748-1:2008 (Edition 2) CWA 15748-1:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Application programming interface (API). Service provider. Int
CWA 15748-10:2008 (Edition 2) CWA 15748-10:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Sensors and indicators unit device class interface. Programm
CWA 15748-11:2008 (Edition 2) CWA 15748-11:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Vendor dependent mode device class interface. Programmer's r
CWA 15748-12:2008 (Edition 2) CWA 15748-12:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Camera device class interface. Programmer's reference
CWA 15748-13:2008 (Edition 2) CWA 15748-13:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Alarm device class interface. Programmer's reference
CWA 15748-14:2008 (Edition 2) CWA 15748-14:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Card embossing unit device class interface. Programmer's ref
CWA 15748-15:2008 (Edition 2) CWA 15748-15:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Cash-in module device class interface. Programmer's referenc
CWA 15748-16:2008 (Edition 2) CWA 15748-16:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Card dispenser device class interface. Programmer's referenc
CWA 15748-17:2008 (Edition 2) CWA 15748-17:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Barcode reader device class interface. Programmer's referenc
CWA 15748-18:2008 (Edition 2) CWA 15748-18:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Item processing module device class interface. Programmer's
CWA 15748-2:2008 (Edition 2) CWA 15748-2:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Service class definition. Programmer's reference
CWA 15748-3:2008 (Edition 2) CWA 15748-3:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Printer and scanning device class interface. Programmer's refe
CWA 15748-4:2008 (Edition 2) CWA 15748-4:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Identification card device class interface. Programmer's refer
CWA 15748-5:2008 (Edition 2) CWA 15748-5:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Cash dispenser device class interface. Programmer's reference
CWA 15748-6:2008 (Edition 2) CWA 15748-6:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. PIN keypad device class interface. Programmer's reference
CWA 15748-61:2008 (Edition 2) CWA 15748-61:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Application programming interface (API). Service provider. I
CWA 15748-63:2008 (Edition 2) CWA 15748-63:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Identification card device class interface. Migration from V
CWA 15748-64:2008 (Edition 2) CWA 15748-64:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Cash dispenser device class interface. Migration from Versio
CWA 15748-65:2008 (Edition 2) CWA 15748-65:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. PIN keypad device class interface. Migration from Version 3.
CWA 15748-66:2008 (Edition 2) CWA 15748-66:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Check reader/scanner device class interface. Migration from
CWA 15748-67:2008 (Edition 2) CWA 15748-67:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Depository device class interface. Migration from Version 3.
CWA 15748-68:2008 (Edition 2) CWA 15748-68:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Text terminal unit device class interface. Migration from Ve
CWA 15748-69:2008 (Edition 2) CWA 15748-69:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Sensors and indicators unit device class interface. Migratio
CWA 15748-7:2008 (Edition 2) CWA 15748-7:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Check reader/scanner device class interface. Programmer's refe
CWA 15748-70:2008 (Edition 2) CWA 15748-70:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Vendor dependent mode device class interface. Migration from
CWA 15748-71:2008 (Edition 2) CWA 15748-71:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Camera device class interface. Migration from Version 3.0 (C
CWA 15748-72:2008 (Edition 2) CWA 15748-72:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Alarm device class interface. Migration from Version 3.0 (CW
CWA 15748-73:2008 (Edition 2) CWA 15748-73:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Card embossing unit device class interface. Migration from V
CWA 15748-74:2008 (Edition 2) CWA 15748-74:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Cash-in module device class interface. Migration from Versio
CWA 15748-8:2008 (Edition 2) CWA 15748-8:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Depository device class interface. Programmer's reference
CWA 15748-9:2008 (Edition 2) CWA 15748-9:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Text terminal unit device class interface. Programmer's refere
CWA 15748-62:2008 (Edition 2) CWA 15748-62:2008 (Edition 2). Extensions for financial services (XFS) interface specification. Release 3.10. Printer and scanning device class interface. Migration from
08/30187141 DC 08/30187141 DC. BS EN 61960. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications
08/30187148 DC 08/30187148 DC. BS ISO 7289. Gas welding equipment. Quick-action couplings with shut-off valves for welding, cutting and allied processes
BS ISO 6709:2008 BS ISO 6709:2008. Standard representation of geographic point location by coordinates
08/30187241 DC 08/30187241 DC. BS ISO 10975. Tractors and machinery for agriculture. Auto-guidance systems. Safety requirements
BS EN 1176-1:2008 BS EN 1176-1:2008. Playground equipment and surfacing. General safety requirements and test methods
BS EN 1176-2:2008 BS EN 1176-2:2008. Playground equipment and surfacing. Additional specific safety requirements and test methods for swings
BS EN 1176-3:2008 BS EN 1176-3:2008. Playground equipment and surfacing. Additional specific safety requirements and test methods for slides
BS EN 1176-4:2008 BS EN 1176-4:2008. Playground equipment and surfacing. Additional specific safety requirements and test methods for cableways
BS EN 1176-5:2008 BS EN 1176-5:2008. Playground equipment and surfacing. Additional specific safety requirements and test methods for carousels
BS EN 1176-6:2008 BS EN 1176-6:2008. Playground equipment and surfacing. Additional specific safety requirements and test methods for rocking equipment
BS EN 1176-7:2008 BS EN 1176-7:2008. Playground equipment and surfacing. Guidance on installation, inspection, maintenance and operation
08/30187323 DC 08/30187323 DC. BS ISO 21873-2. Building construction machinery and equipment. Mobile crushers. Part 2. Safety requirements
08/30187364 DC 08/30187364 DC. BS ISO 11366. Petroleum and related products. Guidance for in-service monitoring of lubricating oils for steam, gas and combined-cycle turbines
08/30187368 DC 08/30187368 DC. BS ISO 11365. Petroleum and related products. Maintenance and use guide for triaryl phosphate ester turbine control fluids
08/30187394 DC 08/30187394 DC. BS ISO 27205. Milk products. Acidifying starter cultures. Standard of identity
08/30187414 DC 08/30187414 DC. BS EN 60929. AC-supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
08/30187424 DC 08/30187424 DC. BS EN 61347-2-7. Lamp controlgear. Part 2-7. Particular requirements for D.C. supplied electronic ballasts for emergency lighting
08/30187445 DC 08/30187445 DC. BS EN 62541-1. OPC Unified Architecture. Part 1. Overview and concepts
08/30187449 DC 08/30187449 DC. BS EN 62541-2. OPC Unified Architecture. Part 2. Security model
08/30187453 DC 08/30187453 DC. BS EN 62541-3. OPC Unified Architecture. Part 3. Address space model
08/30187457 DC 08/30187457 DC. BS EN 62541-4. OPC Unified Architecture. Part 4. Services
08/30187463 DC 08/30187463 DC. BS EN 62541-5. OPC Unified Architecture. Part 5. Information model
08/30187467 DC 08/30187467 DC. BS EN 62541-6. OPC Unified Architecture. Part 6. Mappings
08/30187472 DC 08/30187472 DC. BS EN 62541-8. OPC Unified Architecture. Part 8. Data access
08/30187483 DC 08/30187483 DC. BS EN 50122-3. Railway applications. Fixed installations. Electrical safety, earthing and bonding. Part 3. Mutual interaction of A.C. and D.C. traction systems
08/30187511 DC 08/30187511 DC. BS EN ISO 14406. Geometrical product specifications (GPS). Data extraction
BS EN 10028-1:2007+A1:2009 BS EN 10028-1:2007+A1:2009. Flat products made of steels for pressure purposes. General requirements
08/30187614 DC 08/30187614 DC. BS ISO/IEC 18000-7. Information technology AIDC techniques. Radio frequency identification for item management. Air interface. Part 7. Parameters for active air interfac
08/30187620 DC 08/30187620 DC. BS ISO 12924. Lubricants, industrial oils and related products (Class L). Family X (Greases). Specification
08/30187623 DC 08/30187623 DC. BS EN 60335-2-25. Household and similar electrical appliances. Safety. Part 2-25. Particular requirements for microwave ovens, including combination microwave ovens
08/30187630 DC 08/30187630 DC. BS EN 60335-2-90 AMD1. Household and similar electrical appliances. Safety. Part 2-90. Particular requirements for commercial microwave ovens
BS EN 14511-3:2007 BS EN 14511-3:2007. Air conditioners, liquid chilling packages and heat pumps with electrical driven compressors for space heating and cooling. Test methods
BS EN 10213:2007 BS EN 10213:2007. Steel castings for pressure purposes
KIT 201 KIT 201. Guide to statistical process control (SPC) charts for variables
BS EN 10340:2007 BS EN 10340:2007. Steel castings for structural uses
08/30187682 DC 08/30187682 DC. BS ISO/IEC 26925. Information technology. Data interchange on 120 mm and 80 mm optical disk using +RW HS format. Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording
08/30187684 DC 08/30187684 DC. BS ISO/IEC 12862. Information technology. 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for DL)
08/30187686 DC 08/30187686 DC. BS ISO/IEC 17344. Information technology. Data interchange on 120 mm and 80 mm optical disk using +R format. Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording spe
08/30187688 DC 08/30187688 DC. BS ISO/IEC 17341. Information technology. Data interchange on 120 mm and 80 mm optical disk using +RW format. Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording sp
08/30187690 DC 08/30187690 DC. BS ISO/IEC 29642. Information technology. Data interchange on 120 mm and 80 mm optical disk using +RW DL format. Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recordin
08/30187781 DC 08/30187781 DC. BS EN ISO 10993-16. Biological evaluation of medical devices. Part 16. Toxicokinetic study design for degradation products and leachables
08/30187804 DC 08/30187804 DC. BS EN ISO 2867. Earth-moving machinery. Access systems
08/30187815 DC 08/30187815 DC. BS ISO 19713-1. Road vehicles. Inlet air cleaning equipment for internal combustion engines and compressors. Part 1. Fractional efficiency testing with fine particles (0
08/30187838 DC 08/30187838 DC. BS ISO/IEC 14496-5 AMD22. Information technology. Coding of audio-visual objects. Part 5. Reference software for 3D Graphics Compression Model (3DGCM)
08/30187839 DC 08/30187839 DC. BS ISO 3779. Road vehicles. Vehicle identification number (VIN). Content and structure
BS EN 62233:2008 BS EN 62233:2008. Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure
BS EN 60825-1:2007 BS EN 60825-1:2007. Safety of laser products. Equipment classification and requirements
08/30188055 DC 08/30188055 DC. BS EN 60904-4. Photovoltaic devices. Part 4. Procedure for establishing the traceability of the calibration of reference solar devices
BS ISO 3601-1:2008 BS ISO 3601-1:2008. Fluid power systems. O-rings. Inside diameters, cross-sections, tolerances and designation codes
08/30188165 DC 08/30188165 DC. BS EN ISO 105-J03. Textiles. Tests for colour fastness. Part J03. Calculation of colour differences
08/30188242 DC 08/30188242 DC. BS EN 15850. Foodstuffs. Determination of zearalenone in barley, maize and wheat flour, polenta and cereal based foods for infants and young children. HPLC method with i
08/30188245 DC 08/30188245 DC. BS EN 15851. Foodstuffs. Determination of aflatoxin B1 in cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluoresce
08/30188248 DC 08/30188248 DC. BS EN 60512-9-3. Connectors for electronic equipment. Tests and measurements. Part 9-3. Endurance tests. Test 9c. Mechanical operation (engaging/separating) with electri
BS EN 60927:2007 BS EN 60927:2007. Auxiliaries for lamps. Starting devices (other than glow starters). Performance requirements
08/30188330 DC 08/30188330 DC. BS EN ISO 178. Plastics. Determination of flexural properties
08/30188464 DC 08/30188464 DC. BS EN 62317-2. Ferrite cores. Dimensions. Part 2. Pot-cores for use in telecommunications, power supply, and filter applications
08/30188476 DC 08/30188476 DC. BS ISO 13584-32. Industrial automation systems and integration. Parts library. Part 32. Implementation resources. OntoML. Ontology markup language
08/30188489 DC 08/30188489 DC. BS EN 54-27. Fire detection and fire alarm systems. Part 27. Duct smoke detectors
08/30188496 DC 08/30188496 DC. BS EN 61000-4-15. Electromagnetic compatibility (EMC). Part 4-15. Testing and measurement techniques. Flickermeter. Functional and design specifications
DD ISO/TS 21872-1:2007 DD ISO/TS 21872-1:2007. Microbiology of food and animal feeding stuffs. Horizontal method for the detection of potentially enteropathogenic Vibrio spp. Detection of Vibrio parah
08/30188504 DC 08/30188504 DC. BS ISO 3500 AMD1. Gas cylinders. Seamless steel CO2 cylinders for fixed fire-fighting installations on ships
08/30188684 DC 08/30188684 DC. BS ISO 7268. Pipe components. Definition and selection of PN, Class and K
08/30188848 DC 08/30188848 DC. BS EN 60904-10. Photovoltaic devices. Part 10. Methods of linearity measurement
08/30188855 DC 08/30188855 DC. BS EN ISO 10156. Gases and gas mixtures. Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
08/30188907 DC 08/30188907 DC. BS EN 1317-6. Road restraint systems. Pedestrian restraint systems. Part 6. Pedestrian parapet
08/30188933 DC 08/30188933 DC. BS EN 15854. Ventilation for buildings. Air diffusion. Aerodynamic testing and rating for mixing flow application. Non-isothermal procedure for a cold jet
08/30188941 DC 08/30188941 DC. BS ISO 8301 AMD1. Thermal insulation. Determination of steady-state thermal resistance and related properties. Heat flow meter apparatus
BS 3621:2007+A1:2009 BS 3621:2007+A1:2009. Thief resistant lock assembly. Key egress
BS 8621:2007+A1:2009 BS 8621:2007+A1:2009. Thief resistant lock assembly. Keyless egress
BS 10621:2007+A1:2009 BS 10621:2007+A1:2009. Thief resistant dual-mode lock assembly
08/30189028 DC 08/30189028 DC. PAS 24 AMD1. Enhanced security performance requirements for door assemblies. Single and double leaf, hinged external door assemblies to dwellings
BIP 2177:2008 BIP 2177:2008. Hot and Cold Water Supply. 3rd edition
08/30189097 DC 08/30189097 DC. BS ISO 12968. Thermal insulation products for building applications. Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (f
08/30189214 DC 08/30189214 DC. BS EN 55016-1-1 AMD1. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-1. Radio disturbance and immunity measuring apparatus. Mea
08/30189220 DC 08/30189220 DC. BS EN 55016-2-1 AMD1. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-1. Methods of measurement of disturbances and immunity. Co
08/30189231 DC 08/30189231 DC. BS EN 55016-2-2 AMD1. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-2. Methods of measurement of disturbances and immunity. Me
08/30189237 DC 08/30189237 DC. BS EN 55016-2-3 AMD2. Specification for radio disturbance and immunity measuring apparatus and methods. Part 2-3. Methods of measurement of disturbances and immunity. Ra
08/30189288 DC 08/30189288 DC. BS EN 61076-2-107. Connectors for electronic equipment. Product requirements. Part 2–107. Detail specification for circular hybrid connectors M12 with electrical and fib
08/30189315 DC 08/30189315 DC. BS EN ISO 12099. Animal feedstuffs, cereals and milled cereal products. Guidelines for the application of near infrared spectrometry
08/30189351 DC 08/30189351 DC. BS EN 60793-1-41. Optical fibres. Part 1-41. Measurement methods and test procedures. Bandwidth
08/30189407 DC 08/30189407 DC. BS EN 61512-4. Batch control. Part 4. Batch production records
08/30189438 DC 08/30189438 DC. BS ISO 28499-1. Buffalo hides and buffalo calf skins. Part 1. Description of defects
08/30189441 DC 08/30189441 DC. BS ISO 28499-2. Buffalo hides and buffalo calf skins. Part 2. Grading on the basis of mass and size
08/30189444 DC 08/30189444 DC. BS ISO 28499-3. Buffalo hides and buffalo calf skins. Part 3. Grading on the basis of defects
08/30189631 DC 08/30189631 DC. BS EN 50215. Railway applications. Rolling stock. Testing of rolling stock on completion of construction and before entry into service
08/30189644 DC 08/30189644 DC. BS ISO 28198. Animal and vegetable fats and oils. Determination of toluene insoluble matter
08/30189740 DC 08/30189740 DC. BS ISO IEC 24791-1. Information technology. Radio Frequency Identification (RFID) for item management. Software system infrastructure. Part 1. Architecture
08/30189750 DC 08/30189750 DC. BS EN 4675. Aerospace series. Titanium. Ti 5Al 5Mo 5V 3Cr 0.4Fe. 1300 MPa ≤ Rm ≤ 1400 MPa. Bars. De $OL 110 mm
08/30189753 DC 08/30189753 DC. BS EN 50377-13-2. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 13-2. Type LX.5-PC DUPLEX t
08/30189758 DC 08/30189758 DC. BS EN 50377-13-3. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 13-3. Type LX.5-APC DUPLEX
08/30189820 DC 08/30189820 DC. BS EN ISO 8253-1. Acoustics. Audiometric test methods. Part 1. Basic pure-tone air and bone conduction threshold audiometry
08/30189842 DC 08/30189842 DC. BS ISO 11012. Heavy commercial vehicles and buses. Open-loop test methods for quantification of on-centre handling. Weave test and transition test
08/30189871 DC 08/30189871 DC. BS EN 62216. Digital terrestrial television receivers for the DVT-B system
08/30189878 DC 08/30189878 DC. BS EN 60064 AMD5. Tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements. General
08/30189882 DC 08/30189882 DC. BS EN 60630 AMD6. Maximum lamp outlines for incandescent lamps
08/30189886 DC 08/30189886 DC. BS EN ISO 14906. Road transport and traffic telematics. Electronic fee collection. Application interface definition for dedicated short-range communication
08/30189890 DC 08/30189890 DC. BS EN 61243-1 AMD1. Live working. Voltage detectors. Part 1. Capacitive type to be used for voltages exceeding 1 kV A.C.
08/30189894 DC 08/30189894 DC. BS EN ISO 17264. Road transport and traffic telematics. Automatic vehicle and equipment identification. Interfaces
08/30190022 DC 08/30190022 DC. BS EN 60865-1. Short-circuit currents. Calculation of effects. Part 1. Definitions and calculation methods
08/30190043 DC 08/30190043 DC. BS ISO 8789. Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification
08/30190078 DC 08/30190078 DC. BS ISO 26142. Hydrogen detector
08/30190093 DC 08/30190093 DC. BS EN 50377-7-4. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Part 7-4. LC-PC simplex terminated
08/30190107 DC 08/30190107 DC. BS ISO/IEC 29199-2. Information technology. JPEG XR image coding system. Part 2. JPEG XR image coding specification
08/30190109 DC 08/30190109 DC. BS ISO 4866. Mechanical vibration and shock. Vibration of fixed structures. Guidelines for the measurement of vibrations and evaluation of their effects on structures
08/30190127 DC 08/30190127 DC. BS ISO 16853. Textile machinery. Sliver cans, rectangular. Main dimensions and tolerances
BS 4311-1:2007 BS 4311-1:2007. Gauge blocks manufactured to imperial specification. Specification and validation
08/30190132 DC 08/30190132 DC. BS EN ISO 1874-2 AMD1. Plastics. Polyamide (PA) moulding and extrusion materials. Part 2. Preparation of test specimens and determination of properties
08/30190157 DC 08/30190157 DC. BS EN ISO 14644-9. Cleanrooms and associated controlled environments. Part 9. Classification of surface particle cleanliness
CWA 15884:2008 CWA 15884:2008. Environmental technology verification. Soil and groundwater site characterization, monitoring and remediation technologies
08/30190185 DC 08/30190185 DC. BS EN 60947-4-2. Low-voltage switchgear and controlgear. Part 4-2. Contactors and motor-starters. AC semiconductor motor controllers and starters
BS EN 12602:2008 BS EN 12602:2008. Prefabricated reinforced components of autoclaved aerated concrete
BS EN ISO 5182:2009 BS EN ISO 5182:2009. Resistance welding. Materials for electrodes and ancillary equipment
BS EN 13297:2007 BS EN 13297:2007. Textile floor coverings. Classification of needled pile floor coverings
BS EN 378-1:2008 BS EN 378-1:2008. Refrigerating systems and heat pumps. Safety and environmental requirements. Basic requirements, definitions, classification and selection criteria
ISO/TS10303-1052 : 2007 (CD-ROM) HDR ED2 ISO/TS10303-1052 : 2007 (CD-ROM) HDR ED2. ISO/TS 10303-1052 Industrial automation systems and integration - Product data representation and exchange. Part 1052
BS EN 13094:2008 BS EN 13094:2008. Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
BS EN ISO 17660-1:2006 BS EN ISO 17660-1:2006. Welding. Welding of reinforcing steel. Load-bearing welded joints
BS EN ISO 17660-2:2006 BS EN ISO 17660-2:2006. Welding. Welding of reinforcing steel. Non load-bearing welded joints
BIP 0107:2008 BIP 0107:2008. Foundations of IT Service Management Based on ITIL V3
BIP 0109:2008 BIP 0109:2008. IT Service Management based on ITIL V3 Pocket Guide
BS ISO 25981:2008 BS ISO 25981:2008. Road vehicles. Connectors for the electrical connection of towing and towed vehicles. Connectors for electronically monitored charging systems with 12 V or 24 V no
BS EN ISO 21809-2:2007 BS EN ISO 21809-2:2007. Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Fusion-bonded epoxy co
BS EN 14025:2008 BS EN 14025:2008. Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and Construction
BS EN 55016-1-4:2007+A1:2008 BS EN 55016-1-4:2007+A1:2008. Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Ancilla
DD ISO/TS 22367:2008 DD ISO/TS 22367:2008. Medical laboratories. Reduction of error through risk management and continual improvement
BS EN ISO 22794:2007 BS EN ISO 22794:2007. Dentistry. Implantable materials for bone filling and augmentation in oral and maxillofacial surgery. Contents of a technical file
BS EN ISO 7218:2007 BS EN ISO 7218:2007. Microbiology of food and animal feeding stuffs. General requirements and guidance for microbiological examinations
BS EN 14033-2:2008 BS EN 14033-2:2008. Railway applications. Track. Railbound construction and maintenance machines. Technical requirements for working
BIP 0111:2009 BIP 0111:2009. Implementing metrics for IT service management
BS EN ISO 10135:2009 BS EN ISO 10135:2009. Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD)
BS EN ISO 463:2006 BS EN ISO 463:2006. Geometrical product specifications (GPS). Dimensional measuring Equipment. Design and metrological characteristics of mechanical dial gauges
BS EN 60384-13-1:2006 BS EN 60384-13-1:2006. Fixed capacitors for use in electronic equipment . Blank detail specification. Fixed polypropylene film dielectric metal foil d.c. capacitors. Assessment l
BS EN 1927-2:2008 BS EN 1927-2:2008. Qualitative classification of softwood round timber. Pines
BS ISO/IEC 14443-4:2008 BS ISO/IEC 14443-4:2008. Identification cards. Contactless integrated circuit cards. Proximity. Transmission protocol
BS ISO 18902:2007 BS ISO 18902:2007. Imaging materials. Processed imaging materials. Albums, framing and storage materials
BS EN 60384-3-1:2006 BS EN 60384-3-1:2006. Fixed capacitors for use in electronic equipment. Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide sol
BS EN 60384-4-2:2007 BS EN 60384-4-2:2007. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed aluminium electrolytic capacitors with solid (MnO2)electrolyte. Assessmen
BS EN 62024-1:2008 BS EN 62024-1:2008. High frequency inductive components. Electrical characteristics and measuring methods. Nanohenry range chip inductor
BS EN 3686:2008 BS EN 3686:2008. Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1 100 MPa/650°C
BS EN 12945:2008 BS EN 12945:2008. Liming materials. Determination of neutralizing value. Titrimetric methods
BS EN 10253-4:2008 BS EN 10253-4:2008. Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
BS EN 14891:2007 BS EN 14891:2007. Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, evaluation of conformity, classification
BS EN 12899-1:2007 BS EN 12899-1:2007. Fixed, vertical road traffic signs . Fixed signs
BS 1580-1:2007 BS 1580-1:2007. Unified screw threads. Screw threads with diameters ? in and larger. Requirements
BS 3643-1:2007 BS 3643-1:2007. ISO metric screw threads. Principles and basic data
BS 919-1:2007 BS 919-1:2007. Screw gauge limits and tolerances. Specification for gauges for screw threads of unified form
BS 919-2:2007 BS 919-2:2007. Screw gauge limits and tolerances. Specification for gauges for screw threads of Whitworth and B.A. forms
BS 919-3:2007 BS 919-3:2007. Screw gauge limits and tolerances. Specification for gauges for screw threads of ISO metric form
BS 919-4:2007 BS 919-4:2007. Screw gauge limits and tolerances. Limits of size for gauges for screw threads of unified form diameters 1/4 in and larger
BS 7272-2:2008 BS 7272-2:2008. Writing and marking instruments. Specification for end closures to reduce the risk of asphyxiation
PP 1990:2007 Pk of 5 PP 1990:2007 Pk of 5. Extracts from the Structural Eurocodes for students of structural design
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
