BIS Standards Catalogue
ISO11992-2 : 2003 EDTN 2 ISO11992-2 : 2003 EDTN 2. ISO11992-2 : 2003 Road vehicles- Interchange of digital information on electrical connections between towing and towed vehicles. Part 2: Application
ISO11992-3 : 2003 EDTN 2 ISO11992-3 : 2003 EDTN 2. ISO11992-3 : 2003 Road vehicles- Interchange of digital information on electrical connections between towing and towed vehicles. Part 3: Application
BS EN 54-12:2002 BS EN 54-12:2002. Fire detection and fire alarm systems. Smoke detectors. Line detectors using an optical light beam
BS IEC 61501:1998 BS IEC 61501:1998. Nuclear reactor instrumentation. Wide range neutron fluence rate meter. Mean square voltage method
ISO13855 : 2002 EDTN 1 ISO13855 : 2002 EDTN 1. ISO13855 : 2002 Safety of machinery- Positioning of protective equipment with respect to the approach speeds of parts of the human body
ISO14120 : 2002 EDTN 1 ISO14120 : 2002 EDTN 1. ISO14120 : 2002 Safety of machinery- Guards - General requirements for the design and construction of fixed and movable guards
BS EN ISO 15061:2001, BS 6068-2.73:2001 BS EN ISO 15061:2001, BS 6068-2.73:2001. Water quality. Determination of dissolved bromate. Method by liquid chromatography of ions
BS EN 790:2001 BS EN 790:2001. Inland navigation vessels. Stairs with inclination angles of 45° to 60°. Requirements, types
BS EN 50343:2003 BS EN 50343:2003. Railway applications. Rolling stock. Rules for installation of cabling
BS ISO 4709:2000 BS ISO 4709:2000. Composition cork. Gasket material. Classification system, requirements, sampling, packing and marking
BS EN 806-2:2005 BS EN 806-2:2005. Specifications for installations inside buildings conveying water for human consumption. Design
BS EN 54-13:2005 BS EN 54-13:2005. Fire detection and fire alarm systems. Compatibility assessment of system components
BS EN ISO 1211:2001, BS 1741-3:2001 BS EN ISO 1211:2001, BS 1741-3:2001. Milk. Determination of fat content. Gravimetric method (Reference method)
BS IEC 62198:2001 BS IEC 62198:2001. Project risk management. Application guidelines
DD CEN/TS 54-14:2004 DD CEN/TS 54-14:2004. Fire detection and fire alarm systems. Guidelines for planning, design, installation, commissioning, use and maintenance
BS EN 60512-23-4:2001, IEC 60512-23-4:2001 BS EN 60512-23-4:2001, IEC 60512-23-4:2001. Connectors for electronic equipment. Tests and measurements. Screening and filtering tests. Test 23d. Transmissio
BS EN 12020-2:2001 BS EN 12020-2:2001. Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063. Tolerances on dimensions and form
BS EN 10226-1:2004 BS EN 10226-1:2004. Pipe threads where pressure tight joints are made on the threads. Taper external threads and parallel internal threads. Dimensions, tolerances and designation
BS EN 60512-1:2001, IEC 60512-1:2001 BS EN 60512-1:2001, IEC 60512-1:2001. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General
BS EN 60512-1-100:2001, IEC 60512-1-100:2001 BS EN 60512-1-100:2001, IEC 60512-1-100:2001. Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Genera
BS EN 10217-7:2005 BS EN 10217-7:2005. Welded steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
BS EN 1759-1:2004 BS EN 1759-1:2004. Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated. Steel flanges, NPS 1/2 to 24
BS EN 10025-1:2004 BS EN 10025-1:2004. Hot rolled products of structural steels. General technical delivery conditions
BS ISO 15738:2002 BS ISO 15738:2002. Ships and marine technology. Gas inflation systems for inflatable life-saving appliances
BS EN 12952-15:2003 BS EN 12952-15:2003. Water-tube boilers and auxiliary installations. Acceptance tests
BS EN 12953-11:2003 BS EN 12953-11:2003. Shell boilers. Acceptance tests
BS EN 60454-3-16:2003 BS EN 60454-3-16:2003. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Polyester film/glass filament combin
BS EN 60554-2:2002 BS EN 60554-2:2002. Cellulosic papers for electrical purposes. Methods of test
BS EN 573-3:2003 BS EN 573-3:2003. Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition
BS EN 573-4:2004 BS EN 573-4:2004. Aluminium and aluminium alloys. Chemical composition and form of wrought products. Forms of products
BS ISO 8913:2006 BS ISO 8913:2006. Aerospace. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400°F/3000 psi (204°C/20684 kPa) and 204°C/21000 kPa (400°F/3046 psi). Procurem
ISO15383 : 2001 EDTN 1 ISO15383 : 2001 EDTN 1. ISO15383 : 2001 Protective gloves for firefighters Laboratory test methods and performance requirements
BS ISO 15202-2:2001 BS ISO 15202-2:2001. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sample prepara
WD/15759 : 2002 EDTN 1 WD/15759 : 2002 EDTN 1. ISO15759 : 2002 Medical infusion equipment- Plastics caps with inserted elastomeric liner for containers manufactured by the Blow-Fill-Seal (BFS) process
BS 5628-3:2001 BS 5628-3:2001. Code of practice for use of masonry. Materials and components, design and workmanship
BS ISO 16165:2001 BS ISO 16165:2001. Ships and marine technology. Marine environment protection. Terminology relating to oil spill response
PD ISO/IEC Guide 67:2004 PD ISO/IEC Guide 67:2004. Conformity asessment. Fundamentals of product certification
DD CEN/TS 772-22:2006 DD CEN/TS 772-22:2006. Methods of test for masonry units. Determination of freeze/thaw resistance of clay masonry units
BS EN 10226-2:2005 BS EN 10226-2:2005. Pipe threads where pressure tight joints are made on the threads. Taper external threads and taper internal threads. Dimensions, tolerances and designation
BS EN 485-3:2003 BS EN 485-3:2003. Aluminium and aluminium alloys. Sheet, strip and plate. Tolerances on dimensions and form for hot-rolled products
BS EN 2435-005:2006 BS EN 2435-005:2006. Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion resistance for military application
BS EN 4508:2006 BS EN 4508:2006. Aerospace series. Paints and varnishes. Test method for anti slip coatings. Determination of the sliding friction behaviour
BS EN 4588:2007 BS EN 4588:2007. Aerospace series. Paints and varnishes. Two component, cold curing polyurethane paint, anti slip
BS ISO 10109-7:2001 BS ISO 10109-7:2001. Optics and optical instruments. Environmental requirements. Test requirements for optical measuring instruments
BS EN 1780-1:2002 BS EN 1780-1:2002. Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings. Numerical designation system
BS EN 1780-2:2002 BS EN 1780-2:2002. Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings. Chemical symbol based designation
BS EN 1780-3:2002 BS EN 1780-3:2002. Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings. Writing rules for chemical composi
BS EN 13704:2002 BS EN 13704:2002. Chemical disinfectants. Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and insti
BS EN 60893-1:2004 BS EN 60893-1:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Definitions, designations and general requirements
BS EN 60893-3-1:2004 BS EN 60893-3-1:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requi
BS EN 60893-3-3:2004 BS EN 60893-3-3:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requi
BS EN 60893-3-4:2004 BS EN 60893-3-4:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requi
BS EN 60893-3-5:2004 BS EN 60893-3-5:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requi
BS EN 60893-3-6:2004 BS EN 60893-3-6:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requi
BS EN 60893-3-7:2004 BS EN 60893-3-7:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requi
ISO15708-2 : 2002 EDTN 1 ISO15708-2 : 2002 EDTN 1. ISO15708-2 : 2002 Non-destructive testing- Radiation methods- Computed tomography. Part 2: Examination practices
BS EN ISO 9606-2:2004 BS EN ISO 9606-2:2004. Qualification test of welders. Fusion welding. Aluminium and aluminium alloys
BS EN ISO 15607:2003 BS EN ISO 15607:2003. Specification and qualification of welding procedures for metallic materials. General rules
BS EN ISO 15609-1:2004 BS EN ISO 15609-1:2004. Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Arc welding
BS EN ISO 15614-2:2005 BS EN ISO 15614-2:2005. Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc welding of aluminium and its alloys
BS 5446-2:2003 BS 5446-2:2003. Fire detection and fire alarm devices for dwellings. Specification for heat alarms
BS 5839-9:2003 BS 5839-9:2003. Fire detection and alarm systems for buildings. Code of practice for the design, installation, commissioning and maintenance of emergency voice communication systems
BS 6266:2002 BS 6266:2002. Code of practice for fire protection for electronic equipment installations
DD ENV 12836:2001 DD ENV 12836:2001. Surface active agents. Determination of the water number of alkoxylated products
BS EN 13705:2004 BS EN 13705:2004. Welding of thermoplastics. Machines and equipment for hot gas welding (including extrusion welding)
BS EN 13693:2004 BS EN 13693:2004. Precast concrete products. Special roof elements
ISO12494 : 2001 EDTN 1 ISO12494 : 2001 EDTN 1. ISO12494 : 2001 Atmospheric icing of structures
BS EN 13711:2002 BS EN 13711:2002. Inland navigation vessels. Winches for ship operation. Safety requirements
BS EN 13708:2002 BS EN 13708:2002. Foodstuffs. Detection of irradiated food containing crystalline sugar by ESR spectroscopy
BS EN ISO 3126:2005 BS EN ISO 3126:2005. Plastics piping systems. Plastics components. Determination of dimensions
BS EN 13549:2001 BS EN 13549:2001. Cleaning services. Basic requirements and recommendations for quality measuring systems
BS EN 13585:2002 BS EN 13585:2002. Foodstuffs. Determination of fumonisins B1 and B2 in maize. HPLC method with solid phase extraction clean-up
BS EN 13687-4:2002 BS EN 13687-4:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Dry thermal cycling
BS EN 13733:2002 BS EN 13733:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of the durability of structural bonding agents
BS EN 13687-5:2002 BS EN 13687-5:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Resistance to temperature shock
BS EN 61300-3-34:2002, IEC 61300-3-34:2001 BS EN 61300-3-34:2002, IEC 61300-3-34:2001. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations a
BS EN 62005-3:2001 BS EN 62005-3:2001. Reliability of fibre optic interconnecting devices and passive optical components. Relevant tests for evaluating failure modes and failure mechanisms for passive
BS EN 13726-1:2002 BS EN 13726-1:2002. Test methods for primary wound dressings. Aspects of absorbency
BS EN 13726-2:2002 BS EN 13726-2:2002. Test methods for primary wound dressings. Moisture vapour transmission rate of permeable film dressings
BS 4875-1:2001 BS 4875-1:2001. Strength and stability of furniture. Requirements for the strength and durability of the structure of domestic and contract seating
BS ISO 14621-2:2003 BS ISO 14621-2:2003. Space systems. Electrical, electronic and electromechanical (EEE) parts. Control programme requirements
BS EN 13453-2:2004 BS EN 13453-2:2004. Bunk beds and high beds for non-domestic use. Test methods
BS EN 13706-1:2002 BS EN 13706-1:2002. Reinforced plastics composites. Specifications for pultruded profiles. Designation
BS ISO 15213:2003 BS ISO 15213:2003. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions
BS 6279-2:2001, ISO 6322-2:2000 BS 6279-2:2001, ISO 6322-2:2000. Storage of cereals and pulses. Practical recommendations
BS EN 60876-1:2001, IEC 60876-1:2001 BS EN 60876-1:2001, IEC 60876-1:2001. Fibre optic spatial switches. Generic specification
BS EN 62077:2001, IEC 62077:2001 BS EN 62077:2001, IEC 62077:2001. Fibre optic circulators. Generic specification
BS ISO 14997:2003 BS ISO 14997:2003. Optics and optical instruments. Test methods for surface imperfections of optical elements
PD CR 13714:2001 PD CR 13714:2001. Characterization of sludges. Sludge management in relation to use or disposal
BS ISO/IEC 19500-2:2003 BS ISO/IEC 19500-2:2003. Information technology. Open distributed processing. General Inter-ORB Protocol (GIOP)/Internet Inter-ORB Protocol (IIOP)
PD IEC TR 61000-5-6:2002 PD IEC TR 61000-5-6:2002. Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Mitigation of external EM influences
BS ISO 8573-4:2001 BS ISO 8573-4:2001. Compressed air. Test methods for solid particle content
BS EN 50229:2001 BS EN 50229:2001. Electric clothes washer-dryers for household use. Methods of measuring the performance
BS EN 13503-5:2001 BS EN 13503-5:2001. Ophthalmic implants. Intraocular lenses. Biocompatibility
BS EN 13503-6:2002 BS EN 13503-6:2002. Ophthalmic implants. Intraocular lenses. Shelf-life and transport stability
BS EN 13503-7:2002 BS EN 13503-7:2002. Ophthalmic implants. Intraocular lenses. Clinical investigations
BS EN 13274-6:2002 BS EN 13274-6:2002. Respiratory protective devices. Methods of test. Determination of carbon dioxide content of the inhalation air
BS EN 379:2003 BS EN 379:2003. Personal eye-protection. Automatic welding filters
BS ISO 12003-2:2002 BS ISO 12003-2:2002. Agricultural and forestry tractors. Narrow-track wheeled tractors. Rear-mounted roll-over protective structures
BS ISO 12003-1:2002 BS ISO 12003-1:2002. Agricultural and forestry tractors. Narrow-track wheeled tractors. Front-mounted roll-over protective structures
BS ISO 18921:2002 BS ISO 18921:2002. Imaging materials. Compact discs (CD-ROM). Method for estimating the life expectancy based on the effects of temperature and relative humidity
BS EN 50134-3:2001 BS EN 50134-3:2001. Alarm systems. Social alarm systems. Local unit and controller
ISO17658 : 2002 EDTN 1 ISO17658 : 2002 EDTN 1. ISO17658 : 2002 Welding0 Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts- terminology
DD 252:2002 DD 252:2002. Components for residential sprinkler systems. Specification and test methods for residential sprinklers
BS IEC 60747-14-3:2001, IEC 60747-14-3:2001 BS IEC 60747-14-3:2001, IEC 60747-14-3:2001. Discrete semiconductor devices and integrated circuits. Semiconductor devices. Semiconductor sensors. Pressure
BS EN 61754-15:2001, IEC 61754-15:1999 BS EN 61754-15:2001, IEC 61754-15:1999. Fibre optic connector interfaces. Type LSH connector family
BS ISO 418:2001 BS ISO 418:2001. Photography. Processing chemicals. Specifications for anhydrous sodium sulfite
BS ISO 3627:2001 BS ISO 3627:2001. Photography. Processing chemicals. Specifications for anhydrous sodium metabisulfite
BS ISO 3629:2000 BS ISO 3629:2000. Photography. Processing chemicals. Specifications for potassium metabisulfite
BS ISO 5990:2000 BS ISO 5990:2000. Photography. Processing chemicals. Specifications for potassium sulfite, 650 g/l solution
BS ISO 17531:2002 BS ISO 17531:2002. Photography. Processing chemicals. Specifications for 4-(N-ethyl-N-2- methanesulfonylaminoethyl)-2-methylphenylenediamine sesquisulfate monohydrate
BS EN 50336:2002 BS EN 50336:2002. Bushings for transformers and reactor cable boxes not exceeding 36 kV
BS EN 61300-2-40:2001 BS EN 61300-2-40:2001. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Screen testing of attenuation of single-mode tune
BS EN 60793-1-41:2002 BS EN 60793-1-41:2002. Optical fibres. Measurement methods and test procedures. Bandwidth
BS EN 60793-1-43:2002, IEC 60793-1-43:2001 BS EN 60793-1-43:2002, IEC 60793-1-43:2001. Optical fibres. Measurement methods and test procedures. Numerical aperture
BS EN 60793-1-44:2002 BS EN 60793-1-44:2002. Optical fibres. Measurement methods and test procedures. Cut-off wavelength
BS EN 60793-1-45:2003 BS EN 60793-1-45:2003. Optical fibres. Measurement methods and test procedures. Mode field diameter
BS EN 60793-1-46:2002 BS EN 60793-1-46:2002. Optical fibres. Measurement methods and test procedures. Monitoring of changes in optical transmittance
BS ISO 15635:2001 BS ISO 15635:2001. Coated abrasives. Flap discs
BS ISO 8349:2002 BS ISO 8349:2002. Road vehicles. Measurement of road surface friction
BS EN 13706-2:2002 BS EN 13706-2:2002. Reinforced plastics composites. Specifications for pultruded profiles. Method of test and general requirements
BS ISO 16057:2002 BS ISO 16057:2002. Coated abrasives. Vulcanized fibre discs
BS EN 12927-2:2004 BS EN 12927-2:2004. Safety requirements for cableway installations designed to carry persons. Ropes. Safety factors
BS EN 12927-6:2004 BS EN 12927-6:2004. Safety requirements for cableway installations designed to carry persons. Ropes. Discard criteria
BS EN 13706-3:2002 BS EN 13706-3:2002. Reinforced plastics composites. Specifications for pultruded profiles. Specific requirements
ISO7176-23 : 2002 EDTN 1 ISO7176-23 : 2002 EDTN 1. ISO7176-23 : 2002 Wheelchairs -. Part 23: Requirements and test method for attendant-operated stair-climbing devices
BS EN ISO 16665:2005, BS 6068-5.38:2005 BS EN ISO 16665:2005, BS 6068-5.38:2005. Water quality. Guidelines for quantitative sampling and sample processing of marine soft-bottom macro-fauna
BS EN ISO 5667-19:2004, BS 6068-6.19:2004 BS EN ISO 5667-19:2004, BS 6068-6.19:2004. Water quality. Sampling. Guidance on sampling in marine sediments
BS EN ISO 17994:2004, BS 6068-4.19:2004 BS EN ISO 17994:2004, BS 6068-4.19:2004. Water quality. Criteria for establishing equivalence between microbiological methods
BS ISO 16703:2004 BS ISO 16703:2004. Soil quality. Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
BS ISO 16000-3:2001 BS ISO 16000-3:2001. Indoor air. Determination of formaldehyde and other carbonyl compounds. Active sampling method
BS ISO 16000-4:2004 BS ISO 16000-4:2004. Indoor air. Determination of formaldehyde. Diffusive sampling method
BS EN 13727:2003 BS EN 13727:2003. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants for instruments used in th
BS EN 13718-1:2002 BS EN 13718-1:2002. Air, water and difficult terrain ambulances. Medical devices interface requirements for the continuity of patient care
BS EN 13718-2:2002 BS EN 13718-2:2002. Air, water and difficult terrain ambulances. Operational and technical requirements for the continuity of patient care
DD CLC/TS 50131-4:2006 DD CLC/TS 50131-4:2006. Alarm systems. Intrusion and hold-up systems. Warning devices
BS EN 14148:2003 BS EN 14148:2003. Foodstuffs. Determination of vitamin K1 by HPLC
BS EN 13784:2002 BS EN 13784:2002. Foodstuffs. DNA comet assay for the detection of irradiatied foodstuffs. Screening method
BS EN 13805:2002 BS EN 13805:2002. Foodstuffs. Determination of trace elements. Pressure digestion
BS ISO 12141:2002 BS ISO 12141:2002. Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
BS 7991:2001 BS 7991:2001. Determination of the mode I adhesive fracture energy, GIC, of structural adhesives using the double cantilever beam (DCB) and tapered double cantilever beam (TDCB) specimens
BS EN 771-2:2001 BS EN 771-2:2001. Specification for masonry units. Calcium silicate masonry units
BS EN 771-4:2001 BS EN 771-4:2001. Specification for masonry units. Autoclaved aerated concrete masonry units
BS EN 13751:2002 BS EN 13751:2002. Foodstuffs. Detection of irradiated food using photostimulated luminescence
BS EN ISO 13710:2004 BS EN ISO 13710:2004. Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
BS 4676:2005 BS 4676:2005. Protective clothing. Footwear and gaiters for use in molten metal foundries. Requirements and test methods
BS EN 13750:2002 BS EN 13750:2002. Domestic water kettles for use on top of stove, cooker or hob. Requirements and test methods
BS EN ISO 16140:2003 BS EN ISO 16140:2003. Microbiology of food and animal feeding stuffs. Protocol for the validation of alternative methods
BS EN 13740-2:2003 BS EN 13740-2:2003. Agricultural machinery. Solid fertilizer line-distributors. Environmental protection. Test methods
BS EN 60512-1-1:2002 BS EN 60512-1-1:2002. Connectors for electronic equipment. Tests and measurements. General. Test 1a. Visual examination
BS EN 62018:2003 BS EN 62018:2003. Power consumption of information technology equipment. Measurement methods
BS EN 60512-1-2:2002 BS EN 60512-1-2:2002. Connectors for electronic equipment. Tests and measurements. General. Test 1b. Examination of dimension and mass
BS EN 60512-2-1:2002 BS EN 60512-2-1:2002. Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2a. Contact resistance. Millivolt level
BS EN 60512-2-2:2003 BS EN 60512-2-2:2003. Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2b. Contact resistance. Specified test
BS EN 60512-2-3:2002 BS EN 60512-2-3:2002. Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2c. Contact resistance variation
BS EN 60512-2-5:2003 BS EN 60512-2-5:2003. Connectors for electronic equipment. Tests and measurements. Test 2e. Contact disturbance
BS EN 60512-2-6:2002 BS EN 60512-2-6:2002. Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2f. Housing (shell) electrical continui
BS EN 60512-3-1:2002 BS EN 60512-3-1:2002. Connectors for electronic equipment. Tests and measurements. Insulation tests. Test 3a. Insulation resistance
BS EN 60512-4-1:2003 BS EN 60512-4-1:2003. Connectors for electronic equipment. Tests and measurements. Voltage stress tests. Test 4a. Voltage proof
BS EN 60512-4-2:2002 BS EN 60512-4-2:2002. Connectors for electronic equipment. Tests and measurements. Voltage stress tests. Test 4b. Partial discharge
BS EN 60512-4-3:2002 BS EN 60512-4-3:2002. Connectors for electronic equipment. Tests and measurements. Voltage stress tests. Test 4c. Voltage proof of pre-insulated crimp barrels
BS EN 60512-5-1:2002 BS EN 60512-5-1:2002. Connectors for electronic equipment. Tests and measurements. Current-carrying capacity tests. Test 5a. Temperature rise
BS EN 1943:2002 BS EN 1943:2002. Self adhesive tapes. Measurement of static shear adhesion
BS EN 12390-3:2002 BS EN 12390-3:2002. Testing hardened concrete. Compressive strength of test specimens
BS EN ISO 16104:2003 BS EN ISO 16104:2003. Packaging. Transport packaging for dangerous goods. Test methods
BS ISO 5833:2002 BS ISO 5833:2002. Implants for surgery. Acrylic resin cements
BS EN 3475-408:2005 BS EN 3475-408:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Fire resistance
BS ISO 16200-1:2001 BS ISO 16200-1:2001. Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Pumped sampling method
BS EN ISO 13969:2004 BS EN ISO 13969:2004. Milk and milk products. Guidelines for a standardized description of microbial inhibitor tests
BS ISO 14302:2002 BS ISO 14302:2002. Aerospace series. Space systems. Electromagnetic compatibility requirements
BS ISO 15592-3:2003 BS ISO 15592-3:2003. Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis. Determination of total particulate matter of smoking articl
BS EN 13891:2003 BS EN 13891:2003. Tensional strapping. Guide to selection and use of tensional strapping
BS EN 13394:2001 BS EN 13394:2001. Packaging. Specification for non-metallic tensional strapping
BS EN 13393:2001 BS EN 13393:2001. Packaging. Specification for edge protectors
BS EN 13246:2001 BS EN 13246:2001. Packaging. Specification for tensional steel strapping
BS ISO 9512:2002 BS ISO 9512:2002. Cigarettes. Determination of ventilation. Definitions and measurement principles
BS EN 13247:2001 BS EN 13247:2001. Packaging. Specification for tensional strapping for lifting, lashing and securing of loads
BS EN 13545:2002 BS EN 13545:2002. Pallet superstructures. Pallet collars. Test methods and performance requirements
BS EN 12674-2:2002 BS EN 12674-2:2002. Roll containers. General design and safety principles
BS EN ISO 1302:2002 BS EN ISO 1302:2002. Geometrical product specifications (GPS). Indication of surface texture in technical product documentation
BS EN 12810-2:2003 BS EN 12810-2:2003. Facade scaffolds made of prefabricated components. Particular methods of structural design
BS EN 12811-1:2003 BS EN 12811-1:2003. Temporary works equipment. Scaffolds. Performance requirements and general design
BS EN 61290-3-2:2003 BS EN 61290-3-2:2003. Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters. Electrical spectrum analyzer method
BS EN 12811-2:2004 BS EN 12811-2:2004. Temporary works equipment. Information on materials
BS EN 62005-2:2001 BS EN 62005-2:2001. Reliability of fibre optic interconnecting devices and passive optical components. Quantitative assessment of reliability based on accelerated ageing tests. Temp
BS ISO 3046-5:2001 BS ISO 3046-5:2001. Reciprocating internal combustion engines. Performance. Torsional vibrations
BS ISO 18925:2002 BS ISO 18925:2002. Imaging materials. Optical disk media. Storage practices
BS EN 13743:2002 BS EN 13743:2002. Safety requirements for coated abrasives
BS ISO 17560:2002 BS ISO 17560:2002. Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth profiling of boron in silicon
PD CR 13768:2001 PD CR 13768:2001. Characterization of sludges. Good practice for combined incineration of sludges and household wastes
PD CR 13767:2001, CR 13767:2001 PD CR 13767:2001, CR 13767:2001. Characterization of sludges. Good practice for sludges incineration with and without grease and screenings
BS EN ISO 8536-8:2004 BS EN ISO 8536-8:2004. Infusion equipment for medical use. Infusion equipment for use with pressure infusion apparatus
BS EN ISO 8536-9:2004 BS EN ISO 8536-9:2004. Infusion equipment for medical use. Fluid lines for use with pressure infusion equipment
BS EN ISO 8536-10:2004 BS EN ISO 8536-10:2004. Infusion equipment for medical use. Accessories for fluid lines for use with pressure infusion equipment
BS EN 13760:2003 BS EN 13760:2003. Automotive LPG filling system for light and heavy duty vehicles. Nozzle, test requirements and dimensions
BS EN 10296-1:2003 BS EN 10296-1:2003. Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions. Non-alloy and alloy steel tubes
BS EN ISO 8536-11:2004 BS EN ISO 8536-11:2004. Infusion equipment for medical use. Infusion filters for use with pressure infusion equipment
BS EN 60684-3-340 to 342:2003 BS EN 60684-3-340 to 342:2003. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Expandable braided polyethylen
BS EN 60684-3-343 to 345:2002 BS EN 60684-3-343 to 345:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Expandable braided ethylene ch
DD IEC TS 62091:2003 DD IEC TS 62091:2003. Low-voltage switchgear and controlgear. Controllers for drivers of stationary fire pumps
BS EN 60684-3-420 to 422:2002 BS EN 60684-3-420 to 422:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Polyethylene terephthalate tex
ISO17640 : 2005 EDTN1 ISO17640 : 2005 EDTN1. ISO17640 : 2005 Non-destructive testing of welds - Ultrasonic testing of welded joints
BS EN ISO 14587:2001 BS EN ISO 14587:2001. Hexalobular socket raised countersunk (oval) head tapping screws
ISO17638 : 2003 EDTN 1 ISO17638 : 2003 EDTN 1. ISO17640 : 2003 Non-destructive examination of welds- Magnetic particle testing
ISO17636 : 2003 EDTN 1 ISO17636 : 2003 EDTN 1. ISO17636 : 2003 Non-destructive examination of welds - Radiographic testing of fusion-welded joints
ISO17639 : 2003 EDTN 1 ISO17639 : 2003 EDTN 1. ISO17639 : 2003 Non-destructive examination of fusion welds- Macroscopic and microscopic examination of welds
ISO17635 : 2003 EDTN 1 ISO17635 : 2003 EDTN 1. ISO17635 : 2003 Non-destructive examination of welds- General rules for metallic materials
ISO9015-2 : 2003 EDTN 1 ISO9015-2 : 2003 EDTN 1. ISO9015 : 2003 Destructive test on on welds in metallic materials - Hardness tesing. Part 2 : Hardness test on arc welded joints
BS EN 13544-2:2002 BS EN 13544-2:2002. Respiratory therapy equipment. Tubing and connectors
BS EN 13544-3:2001 BS EN 13544-3:2001. Respiratory therapy equipment. Air entrainment devices
BS EN 13783:2002 BS EN 13783:2002. Foodstuffs. Detection of irradiated food using Direct Epifluorescent Filter Technique/Aerobic Plate Count (DEFT/APC). Screening method
BS ISO/IEC 11694-3:2001 BS ISO/IEC 11694-3:2001. Identification cards. Optical memory cards. Linear recording method. Optical properties and characteristics
ISO/IEC10021-1 : 2003 (EDTN2) HEADER ISO/IEC10021-1 : 2003 (EDTN2) HEADER. ISO/IEC10021-1 : 2003 Information technology - Message Handling systems (MHS). Part 1: System and Service Overview
BS EN 12780:2002, BS 6068-4.15:2002 BS EN 12780:2002, BS 6068-4.15:2002. Water quality. Detection and enumeration of Pseudomonas aeruginosa by membrane filtration
ISO/IEC10021-4 : 2003 (CD-ROM) ISO/IEC10021-4 : 2003 (CD-ROM) . ISO/IEC10021-4 : 2003 Information technology - Message Handlin system: Abstract service definition and procedures
BS EN 13981-2:2004 BS EN 13981-2:2004. Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery. Plates and sheets
BS EN 10162:2003 BS EN 10162:2003. Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
BS EN 60255-22-7:2003 BS EN 60255-22-7:2003. Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Power frequency immunity tests
BS EN 576:2003 BS EN 576:2003. Aluminium and aluminium alloys. Unalloyed aluminium ingots for remelting. Specifications
BS EN 60335-2-88:2002 BS EN 60335-2-88:2002. Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for humidifiers intended for use
BS EN ISO 6272-1:2004, BS 3900-E13:2004 BS EN ISO 6272-1:2004, BS 3900-E13:2004. Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, large-area indenter
BS EN 10080:2005 BS EN 10080:2005. Steel for the reinforcement of concrete. Weldable reinforcing steel. General
DD CLC/TS 50131-2-6:2004 DD CLC/TS 50131-2-6:2004. Alarm systems. Intrusion systems. Requirements for opening contacts (magnetic)
BS ISO 17288-1:2002 BS ISO 17288-1:2002. Passenger cars. Free-steer behaviour. Steering-release open-loop test method
BS EN 10025-2:2004 BS EN 10025-2:2004. Hot rolled products of structural steels. Technical delivery conditions for non-alloy structural steels
BS EN 10025-3:2004 BS EN 10025-3:2004. Hot rolled products of structural steels. Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
BS EN 60255-22-4:2002 BS EN 60255-22-4:2002. Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Electrical fast transient/burst immunity test
BS EN 1330-7:2005 BS EN 1330-7:2005. Non-destructive testing. Terminology. Terms used in magnetic particle testing
BS EN 1330-10:2003 BS EN 1330-10:2003. Non-destructive testing. Terminology. Terms used in visual testing
PD CR 14599:2002 PD CR 14599:2002. Terms and definitions for welding purposes in relation with EN 1792
BS EN 14324:2004 BS EN 14324:2004. Brazing. Guidance on the application of brazed joints
ISO14737 : 2003 EDTN.1 ISO14737 : 2003 EDTN.1. ISO14737 : 2003 Cast non-alloy and low alloy steels for steels for general applications
BS ISO 14881:2001 BS ISO 14881:2001. Integrated optics. Interfaces. Parameters relevant to coupling properties
BS ISO 9633:2001 BS ISO 9633:2001. Cycle chains. Characteristics and test methods
BS EN ISO 10289:2001 BS EN ISO 10289:2001. Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates. Rating of test specimens and manufactured articles subjected t
BS EN ISO 3059:2001 BS EN ISO 3059:2001. Non-destructive testing. Penetrant testing and magnetic particle testing. Viewing conditions
BS EN 14153-2:2003 BS EN 14153-2:2003. Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Level 2. Autonomous Diver
BS EN 14153-3:2003 BS EN 14153-3:2003. Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Level 3. Dive Leader
BS EN 14153-1:2003 BS EN 14153-1:2003. Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Level 1. Supervised Diver
BS EN 14413-2:2004 BS EN 14413-2:2004. Recreational diving services. Safety related minimum requirements for the training of scuba instructors. Level 2
BS EN 14467:2004 BS EN 14467:2004. Recreational diving services. Requirements for recreational scuba diving service providers
BS EN 14096-1:2003 BS EN 14096-1:2003. Non-destructive testing. Qualification of radiographic film digitisation systems. Definitions, quantitative measurements of image quality parameters, standard re
BS EN ISO 14819-2:2003 BS EN ISO 14819-2:2003. Traffic and Traveller Information (TTI). TTI messages via traffic message coding. Event and information codes for Radio Data System. Traffic Message Chan
BS EN 14096-2:2003 BS EN 14096-2:2003. Non-destructive testing. Qualification of radiographic film digitisation systems. Minimum requirements
ISO/IEC10021-7 : 2003 (CD-ROM) HEADER ISO/IEC10021-7 : 2003 (CD-ROM) HEADER. ISO/IEC10021-7 : 2003 Information technology - Message Hanlding System (MHS): Interpersonal messaging system
BS AU 50-4.2.1a:2002, ISO 4209-2:2001 BS AU 50-4.2.1a:2002, ISO 4209-2:2001. Tyres and wheels. Rim profiles and dimensions. Commercial vehicle rims. Specification for metric series rims. Section 2: Co
BS EN 14847:2005 BS EN 14847:2005. Aerosol containers. Tinplate containers. Dimensions of the 25,4 mm (one inch) aperture
BS EN 15006:2006 BS EN 15006:2006. Metal aerosol containers. Aluminium containers. Dimensions of the 25,4 mm aperture
BS EN 14849:2005 BS EN 14849:2005. Aerosol containers. Glass containers. Dimensions of aerosol valve ferrules
BS EN 15007:2006 BS EN 15007:2006. Metal aerosol containers. Tinplate containers. Dimensions of two and three-piece cans
BS 7971-1:2002 BS 7971-1:2002. Protective clothing and equipment for use in violent situations and in training. General requirements
BS EN 15008:2006 BS EN 15008:2006. Aerosol containers. Aluminium containers. Dimensions of one-piece cans with 25,4 mm aperture
BS EN 14850:2005 BS EN 14850:2005. Aerosol containers. Metal containers with 25,4 mm aperture. Measurement of contact height
BS EN 14854:2005 BS EN 14854:2005. Aerosol containers. Glass containers. Dimensions of the neck finish
BS EN 15009:2006 BS EN 15009:2006. Aerosol containers. Compartmented aerosol containers
BS EN 14054:2003 BS EN 14054:2003. Packaging. Paper and paperboard packaging. Design of cartons
BS EN 13972:2002 BS EN 13972:2002. Rigid plastic containers. Definition of nominal, brimful and total capacity and measurement of brimful and total capacity
BS EN 13973:2002 BS EN 13973:2002. Rigid plastics containers. Method for determination of drainability
BS EN 13780:2003 BS EN 13780:2003. Touch and close fasteners. Determination of longitudinal shear strength
BS EN 13974:2002 BS EN 13974:2002. Rigid plastics containers. Specification of tolerance for dimensions, weight and volume
BS EN 14401:2004 BS EN 14401:2004. Rigid plastics containers. Methods to test the effectiveness of closures
BS ISO 14511:2001 BS ISO 14511:2001. Measurement of fluid flow in closed conduits. Thermal mass flowmeters
BS EN 14149:2003 BS EN 14149:2003. Packaging. Complete, filled transport packages and unit loads. Impact test by rotational drop
BS EN 14477:2004 BS EN 14477:2004. Packaging. Flexible packaging material. Determination of puncture resistance. Test methods
BS EN 50134-5:2004 BS EN 50134-5:2004. Alarm systems. Social alarm systems. Interconnections and communications
BS EN 14479:2004 BS EN 14479:2004. Packaging. Flexible packaging material. Determination of residual solvents by dynamic headspace gas chromatography. Absolute method
BS EN 14053:2003 BS EN 14053:2003. Packaging. Packagings manufactured from corrugated or solid fibreboard. Types and construction
BS EN 14635:2006 BS EN 14635:2006. Glass packaging. 26 H 126 crown finish. Dimensions
BS EN 14634:2006 BS EN 14634:2006. Glass packaging. 26 H 180 crown finish. Dimensions
BS EN ISO 8113:2004 BS EN ISO 8113:2004. Glass containers. Resistance to vertical load. Test method
BS EN ISO 7459:2004 BS EN ISO 7459:2004. Glass containers. Thermal shock resistance and thermal shock endurance. Test methods
BS EN ISO 7458:2004 BS EN ISO 7458:2004. Glass containers. Internal pressure resistance. Test methods
BS ISO 15550:2002 BS ISO 15550:2002. Internal combustion engines. Determination and method for the measurement of engine power. General requirements
BS EN 13776:2002 BS EN 13776:2002. Filling and discharge procedures for LPG road tankers
NC/BSENISO7539-6 : 2003 NC/BSENISO7539-6 : 2003.
BS EN 12952-1:2001 BS EN 12952-1:2001. Water-tube boilers and auxiliary installations. General
BS EN 171000:2001 BS EN 171000:2001. Harmonized system of quality assessment for electronic components. Generic specification. Filters using waveguide type dielectric resonators
BS EN ISO 7439:2002 BS EN ISO 7439:2002. Copper-bearing intra-uterine contraceptive devices. Requirements, tests
BS EN 170100:2001 BS EN 170100:2001. Harmonized system of quality assessment for electronic components. Sectional specification: Waveguide type dielectric resonators
BS ISO 9213:2004 BS ISO 9213:2004. Measurement of total discharge in open channels. Electromagnetic method using a full-channel-width coil
BS EN 12470-5:2003 BS EN 12470-5:2003. Clinical thermometers. Performance of infra-red ear thermometers (with maximum device)
BS EN 13826:2003 BS EN 13826:2003. Peak expiratory flow meters
BS EN 13867:2002 BS EN 13867:2002. Concentrates for haemodialysis and related therapies
BS EN 13868:2002 BS EN 13868:2002. Catheters. Test methods for kinking of single lumen catheters and medical tubing
ISO16050 : 2003 EDTN 1 ISO16050 : 2003 EDTN 1. ISO16050 : 2003 Foodstuffs- Determination of aflatoxin B1 and the sum of B1, B2, G1 & G2 in cereals, nuts and derived products- High performance liqu
BS EN 13645:2002 BS EN 13645:2002. Installations and equipment for liquefied natural gas. Design of onshore installations with a storage capacity between 5 t and 200 t
ISO4990 : 2003 EDTN2 ISO4990 : 2003 EDTN2. ISO4990 : 2003 EDTN 2 Steel castings - General technical delivery requirements
BS 5911-5:2004 BS 5911-5:2004. Concrete pipes and ancillary concrete products. Specification for prestressed non-pressure pipes and fittings with flexible joints
BS EN 61076-4-110:2002, IEC 61076-4-110:2001 BS EN 61076-4-110:2002, IEC 61076-4-110:2001. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data appl
BS EN ISO 18279:2003 BS EN ISO 18279:2003. Brazing. Imperfections in brazed joints
BS EN 60684-3-406 to 408:2003 BS EN 60684-3-406 to 408:2003. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Glass textile sleeving with PV
BS EN ISO 6520-2:2002 BS EN ISO 6520-2:2002. Welding and allied processes. Classification of geometric imperfections in metallic materials. Welding with pressure
BS EN ISO 3823-2:2003 BS EN ISO 3823-2:2003. Dental rotary instruments. Burs. Finishing burs
BS ISO 6721-10:1999 BS ISO 6721-10:1999. Plastics. Determination of dynamic mechanical properties. Complex shear viscosity using a parallel-plate oscillatory rheometer
BS EN 13596:2004 BS EN 13596:2004. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of bond strength
BS EN 13796-1:2005 BS EN 13796-1:2005. Safety requirements for cableway installations designed to carry persons. Carriers. Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenanc
BS EN ISO 15011-3:2002 BS EN ISO 15011-3:2002. Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc welding. Determination of ozone concent
BS EN ISO 15615:2002 BS EN ISO 15615:2002. Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. Safety requirements in high-pressure devices
BS EN ISO 15011-2:2003 BS EN ISO 15011-2:2003. Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc welding. Determination of emission rate
BS EN 12457-1:2002 BS EN 12457-1:2002. Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 2 l
BS EN 12457-2:2002 BS EN 12457-2:2002. Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10
BS EN 311:2002 BS EN 311:2002. Wood-based panels. Surface soundness. Test method
BS EN 12457-3:2002 BS EN 12457-3:2002. Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Two stage batch test at a liquid to solid ratio of 2 l
BS EN 12457-4:2002 BS EN 12457-4:2002. Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10
BS ISO 16549:2004 BS ISO 16549:2004. Textiles. Unevenness of textile strands. Capacitance method
BS ISO 17202:2002 BS ISO 17202:2002. Textiles. Determination of twist in single spun yarns. Untwist/retwist method
BS EN 12373-1:2001 BS EN 12373-1:2001. Aluminium and aluminium alloys. Anodizing. Method for specifying decorative and protective anodic oxidation coatings on aluminium
BS ISO 3085:2002 BS ISO 3085:2002. Iron ores. Experimental methods for checking the precision of sampling, sample preparation and measurement
WD/BSISO15319 : 1999 WD/BSISO15319 : 1999 .
BS EN 13793:2003 BS EN 13793:2003. Thermal insulating products for building applications. Determination of behaviour under cyclic loading
BS EN ISO 544:2003 BS EN ISO 544:2003. Welding consumables. Technical delivery conditions for welding filler metals. Type of product, dimensions, tolerances and markings
WD/BSEN60216-5 : 2003 WD/BSEN60216-5 : 2003 .
BS EN 60947-2:2003 BS EN 60947-2:2003. Specification for low-voltage switchgear and controlgear. Circuit-breakers
BS EN 61340-4-3:2002, IEC 61340-4-3:2001 BS EN 61340-4-3:2002, IEC 61340-4-3:2001. Electrostatics. Standard test methods for specific applications. Footwear
BS 7373-2:2001 BS 7373-2:2001. Product specifications. Guide to identifying criteria for a product specification and to declaring product conformity
BS EN ISO 16139:2006 BS EN ISO 16139:2006. Industrial valves. Gate valves of thermoplastic materials
BS EN ISO 16101:2004 BS EN ISO 16101:2004. Packaging. Transport packaging for dangerous goods. Plastics compatibility testing
BS EN 12504-2:2001 BS EN 12504-2:2001. Testing concrete in structures. Non-destructive testing. Determination of rebound number
BS EN 12504-3:2005 BS EN 12504-3:2005. Testing concrete in structures. Determination of pull-out force
BS EN 13782:2005 BS EN 13782:2005. Temporary structures. Tents. Safety
BS ISO 10705-3:2003, BS 6068-4.16:2003 BS ISO 10705-3:2003, BS 6068-4.16:2003. Water quality. Detection and enumeration of bacteriophages. Validation of methods for concentration of bacteriophages fro
BS EN 1168:2005 BS EN 1168:2005. Precast concrete products. Hollow core slabs
BS EN 13791:2007 BS EN 13791:2007. Assessment of in-situ compressive strength in structures and pre-cast concrete components
BS EN ISO 16103:2005 BS EN ISO 16103:2005. Packaging. Transport packages for dangerous goods. Recycled plastics material
DD ENV 12443:2001 DD ENV 12443:2001. Medical informatics. Healthcare information framework (HIF)
BS EN 62024-1:2002 BS EN 62024-1:2002. High frequency inductive components. Electrical characteristics and measuring methods. Nanohenry range chip inductor
BS EN ISO 8106:2004 BS EN ISO 8106:2004. Glass containers. Dermination of capacity by gravimetric method. Test method
BS EN ISO 8611-1:2004 BS EN ISO 8611-1:2004. Pallets for materials handling. Flat pallets. Test methods
BS EN 61754-18:2002, IEC 61754-18:2001 BS EN 61754-18:2002, IEC 61754-18:2001. Fibre optic connector interfaces. Type MT-RJ connector family
BS EN 187105:2002 BS EN 187105:2002. Single mode optical cable (duct/direct buried installation)
BS EN 50325-1:2001 BS EN 50325-1:2001. Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces. General requirements
BS EN 50325-2:2001 BS EN 50325-2:2001. Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces. DeviceNet
BS EN 50325-3:2001 BS EN 50325-3:2001. Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces. Smart distributed systems (SDS)
BS EN 13788:2002 BS EN 13788:2002. Machine tools. Safety. Multi-spindle automatic turning machines
BS EN 13804:2002 BS EN 13804:2002. Foodstuffs. Determination of trace elements. Performance criteria, general considerations and sample preparation
BS EN ISO 11554:2003 BS EN ISO 11554:2003. Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
BS EN ISO 18613:2003 BS EN ISO 18613:2003. Repair of flat wooden pallets
BS EN ISO 4135:2001 BS EN ISO 4135:2001. Anaesthetic and respiratory equipment. Vocabulary
BS EN 14127:2004 BS EN 14127:2004. Non-destructive testing. Ultrasonic thickness measurement
BS ISO 15629:2002 BS ISO 15629:2002. Pallets for materials handling. Quality of fasteners for assembly of new and repair of used, flat, wooden pallets
BS ISO 18333:2002 BS ISO 18333:2002. Pallets for materials handling. Quality of new wooden components for flat pallets
BS ISO 18334:2003 BS ISO 18334:2003. Pallets for materials handling. Quality of assembly of new, wooden, flat pallets
BS EN 14584:2005 BS EN 14584:2005. Non-destructive testing. Acoustic emission. Examination of metallic pressure equipment during proof testing. Planar location of AE sources
BS EN ISO 90-3:2001 BS EN ISO 90-3:2001. Light gauge metal containers. Definitions and determination of dimensions and capacities. Light gauge metal containers. Definitions and determination of dimens
BS 1262:2002 BS 1262:2002. Metal packaging. Round lever-lid metal containers for surface coatings. Specification
BS EN 12674-3:2004 BS EN 12674-3:2004. Roll containers. Test methods
BS EN 12674-4:2006 BS EN 12674-4:2006. Roll containers. Performance requirements
BS EN 1744-3:2002 BS EN 1744-3:2002. Tests for chemical properties of aggregates. Preparation of eluates by leaching of aggregates
BS EN ISO 17510-1:2002 BS EN ISO 17510-1:2002. Sleep apnoea breathing therapy. Sleep apnoea breathing therapy devices
BS EN 13824:2004 BS EN 13824:2004. Sterilization of medical devices. Aseptic processing of liquid medical devices. Requirements
BS ISO 14396:2002 BS ISO 14396:2002. Reciprocating internal combustion engines. Determination and method for the measurement of engine power. Additional requirements for exhaust emission tests in acco
BS EN 13010:2003 BS EN 13010:2003. Packaging. Unit packaging. Dimensions and requirements for pegboard display
BS EN 13590:2003 BS EN 13590:2003. Packaging. Flexible carrier bags for the transport of various retail goods. General characteristics and test methods for the determination of volume and carrying cap
BS EN 50348:2002 BS EN 50348:2002. Automatic electrostatic spraying equipment for non-flammable liquid spraying material
BS EN 13626:2003 BS EN 13626:2003. Packaging. Box pallets. General requirements and test methods
BS EN 13628-1:2002 BS EN 13628-1:2002. Packaging. Flexible packaging material. Determination of residual solvents by static headspace gas chromatography. Absolute methods
BS EN 13628-2:2002 BS EN 13628-2:2002. Packaging. Flexible packaging material. Determination of residual solvents by static headspace gas chromatography. Industrial methods
BS EN 13593:2003 BS EN 13593:2003. Packaging. Paper sacks for household waste collection. Types, requirements and test methods
BS EN 9110:2005 BS EN 9110:2005. Aerospace series. Quality systems. Model for quality assurance applicable to maintenance organizations
BS EN 9120:2005 BS EN 9120:2005. Aerospace series. Quality management systems. Requirements for stockist distributors
BS EN 2243-1:2005 BS EN 2243-1:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test method. Single lap shear
BS EN 2243-2:2005 BS EN 2243-2:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test method. Peel metal-metal
BS EN 2243-3:2005 BS EN 2243-3:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test method. Peeling test metal-honeycomb core
BS EN 2243-4:2005 BS EN 2243-4:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test method. Metal-honeycomb core flatwise tensile test
BS EN 2243-5:2005 BS EN 2243-5:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test method. Ageing tests
BS EN 2243-6:2005 BS EN 2243-6:2005. Aerospace series. Non-metallic materials. Structural adhesives. Test method. Determination of shear stress and shear strain
BS EN 61754-19:2002, IEC 61754-19:2001 BS EN 61754-19:2002, IEC 61754-19:2001. Fibre optic connector interfaces. Type SG connector family
ISO3580 : 2004 EDTN.2 ISO3580 : 2004 EDTN.2. ISO3580 : 2004 Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification
ISO17846 : 2004 EDTN 1 ISO17846 : 2004 EDTN 1. ISO17846 : 2004 Welding and allied processes - Health and safety - Wordless precautionary labels for equipment and conusmables used in arc welding and cu
BS EN 60424-4:2001 BS EN 60424-4:2001. Guidance of the limits of surface irregularities of ferrite cores. Ring cores
BS EN 61855:2003 BS EN 61855:2003. Household electrical hair care appliances. Methods of measuring the performance
BS EN 60480:2004 BS EN 60480:2004. Guidelines for the checking and treatment of sulphur hexafluoride (SF6) taken from electrical equipment and specification for its re-use
BS EN ISO 9360-2:2002 BS EN ISO 9360-2:2002. Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans. HMEs for use with tracheostomized pati
BS EN 1060-4:2004 BS EN 1060-4:2004. Non-invasive sphygmomanometers. Test procedures to determine the overall system accuracy of automated non-invasive sphygmomanometers
BS EN 14079:2003 BS EN 14079:2003. Non-active medical devices. Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze
BS EN 14184:2003, BS 6068-5.34:2003 BS EN 14184:2003, BS 6068-5.34:2003. Water quality. Guidance standard for the surveying of aquatic macrophytes in running waters
BS EN 14011:2003, BS 6068-5.32:2003 BS EN 14011:2003, BS 6068-5.32:2003. Water quality. Sampling of fish with electricity
BS ISO 16603:2004 BS ISO 16603:2004. Clothing for protection against contact with blood and body fluids. Determination of the resistance of protective clothing materials to penetration by blood and bo
BS ISO 15553:2006 BS ISO 15553:2006. Water quality. Isolation and identification of Cryptosporidium oocysts and Giardia cysts from water
BS ISO 16604:2004 BS ISO 16604:2004. Clothing for protection against contact with blood and body fluids. Determination of resistance of protective clothing materials to penetration by blood-borne path
DD CLC TS 50349:2004 DD CLC TS 50349:2004. Qualification of electrical installation contractors
BS ISO 12256:2002 BS ISO 12256:2002. Drives, internal, cruciform, ribbed. Metric series
BS ISO 3764:2000 BS ISO 3764:2000. Timekeeping instruments. Movements. Forms, dimensions and nomenclature
BS EN 13802:2004 BS EN 13802:2004. Railway applications. Suspension components. Hydraulic dampers
BS ISO 15186-3:2002 BS ISO 15186-3:2002. Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity. Laboratory measurements at low frequencies
BS EN 13949:2003 BS EN 13949:2003. Respiratory equipment. Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen. Requirements, testing, marking
BS EN 14143:2003 BS EN 14143:2003. Respiratory equipment. Self-contained re-breathing diving apparatus
BS ISO 14275:2002 BS ISO 14275:2002. Aerospace. Drives, internal, offset cruciform, ribbed. Metric series
BS ISO 14276:2002 BS ISO 14276:2002. Aerospace. Drives, internal, offset cruciform. Metric series
BS ISO 14278:2002 BS ISO 14278:2002. Aerospace. Gauges, for internal offset cruciform ribbed or unribbed drives. Metric series
BS ISO 14279:2002 BS ISO 14279:2002. Aerospace. Drives, internal, cruciform. Metric series
BS ISO 14280:2002 BS ISO 14280:2002. Aerospace. Drivers, ribbed, for internal cruciform ribbed or unribbed drives. Metric series
BS ISO 14281:2002 BS ISO 14281:2002. Aerospace. Gauges, for internal cruciform ribbed or unribbed drives. Metric series
ISO/TR17944 : 2002 EDTN 1 ISO/TR17944 : 2002 EDTN 1. ISO/TR17944 : 2002 Banking, Securities and other financial services- Framework of security in financial systems
BS EN ISO 1567:2001 BS EN ISO 1567:2001. Dentistry. Denture base polymers
BS ISO 12107:2003 BS ISO 12107:2003. Metallic materials. Fatigue testing. Statistical planning and analysis of data
BS ISO 12108:2002 BS ISO 12108:2002. Metallic materials. Fatigue testing. Fatigue crack growth method
BS EN ISO 10360-4:2001 BS EN ISO 10360-4:2001. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs used in scanning measuring mo
BS EN ISO 13695:2004 BS EN ISO 13695:2004. Optics and photonics. Lasers and laser-related equipment. Test methods for the spectral characteristics of lasers
BS ISO 3290:2001 BS ISO 3290:2001. Rolling bearings. Balls. Dimensions and tolerances
BS 903-A58.1:2001, ISO 289-3:1999 BS 903-A58.1:2001, ISO 289-3:1999. Physical testing of rubber. Methods using the Mooney viscometer. Determination of the Delta Mooney value for non-pigmented, oil-ext
ISO8362-1 : 2003 EDTN 2 ISO8362-1 : 2003 EDTN 2. ISO8362-1 : 2003 Injection containers and accessories. Part 1: Injection vials made of glass tubing
ISO8362-4 : 2003 EDTN 2 ISO8362-4 : 2003 EDTN 2. ISO8362-4 : 2003 Injection containers and accessories. Part 4: Injection vials made of moulded glass
BS 5502-22:2003 BS 5502-22:2003. Buildings and structures for agriculture. Code of practice for design, construction and loading
BS EN ISO 18273:2004 BS EN ISO 18273:2004. Welding consumables. Wire electrodes, wires and rods for welding of aluminium and aluminium alloys. Classification
BS EN 13328-1:2001 BS EN 13328-1:2001. Breathing system filters for anaesthetic and respiratory use. Salt test method to assess filtration performance
BS ISO/IEC 15693-3:2001 BS ISO/IEC 15693-3:2001. Identification cards. Contactless integrated circuit(s) cards. Vicinity cards. Anticollision and transmission protocol
BS ISO/IEC 10373-7:2001 BS ISO/IEC 10373-7:2001. Identification cards. Test methods. Vicinity cards
BS EN ISO 1071:2003 BS EN ISO 1071:2003. Welding consumables. Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron. Classification
BS EN 50324-3:2002 BS EN 50324-3:2002. Piezoelectric properties of ceramic materials and components. Methods of measurement. High power
BS EN 13523-6:2002 BS EN 13523-6:2002. Coil coated metals. Test methods. Adhesion after indentation (cupping test)
BS EN 13523-15:2002 BS EN 13523-15:2002. Coil coated metals. Test methods. Metamerism
BS EN 13523-23:2002 BS EN 13523-23:2002. Coil coated metals. Test methods. Colour stability in humid atmospheres containing sulfur dioxide
BS 7270:2006 BS 7270:2006. Metallic materials. Constant amplitude strain controlled axial fatigue. Method of test
BS EN 60512-25-1:2001, IEC 60512-25-1:2001 BS EN 60512-25-1:2001, IEC 60512-25-1:2001. Connectors for electronic equipment. Test and measurements. Test 25a. Crosstalk ratio
BS EN 4585:2003 BS EN 4585:2003. Aerospace series. Clips, spring tension. Technical specification
BS EN 2083:2001 BS EN 2083:2001. Aerospace series. Copper and copper alloy conductors for electrical cables. Product standard
DD ISO/TS 11155-2:2002 DD ISO/TS 11155-2:2002. Road vehicles. Air filters for passenger compartments. Test for gaseous filtration
BS EN 14097:2001 BS EN 14097:2001. Space product assurance. Nonconformance control system
BS EN 14099:2001 BS EN 14099:2001. Space product assurance. Measurement of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
BS EN 14100:2001 BS EN 14100:2001. Space product assurance. The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment
BS EN 14098:2001 BS EN 14098:2001. Space product assurance. Thermal cycling test for the screening of space materials and processes
BS EN 14101:2001 BS EN 14101:2001. Space product assurance. Material selection for controlling stress-corrosion cracking
BS EN ISO 6416:2005 BS EN ISO 6416:2005. Hydrometry. Measurement of discharge by the ultrasonic (acoustic) method
BS ISO 8374:2001 BS ISO 8374:2001. Photography. Determination of ISO safelight conditions
DD ISO/TR 16144:2002 DD ISO/TR 16144:2002. Hydraulic fluid power. Calibration of liquid automatic particle counters. Procedures used to certify the standard reference material SRM 2806
PD ISO/TR 16806:2003 PD ISO/TR 16806:2003. Pneumatic fluid power. Cylinders. Load capacity of pneumatic slides and their presentation method
BS EN ISO 2439:2001 BS EN ISO 2439:2001. Flexible cellular polymeric materials. Determination of hardness (indentation technique)
BS EN ISO 10350-1:2001 BS EN ISO 10350-1:2001. Plastics. Acquisition and presentation of comparable single-point data. Moulding materials
BS ISO 15086-1:2001 BS ISO 15086-1:2001. Hydraulic fluid power. Determination of fluid-borne noise characteristics of components and systems. Hydraulic fluid power. Determination of the fluid borne no
BS EN ISO 14314:2004 BS EN ISO 14314:2004. Reciprocating internal combustion engines. Recoil starting equipment. General safety requirements
BS EN 62025-1:2002 BS EN 62025-1:2002. High frequency inductive components. Non-electrical characteristics and measuring methods. Fixed, surface mounted inductors for use in electronic and telecommuni
BS ISO 8098:2002 BS ISO 8098:2002. Cycles. Safety requirements for bicycles for young children
BS EN 13815:2006 BS EN 13815:2006. Fibrous gypsum plaster casts. Definitions, requirements and test methods
BS ISO/IEC 15939:2002 BS ISO/IEC 15939:2002. Software engineering. Software measurement process
BS ISO 13617:2001 BS ISO 13617:2001. Ships and marine technology. Shipboard incinerators. Requirements
BS ISO 16446:2002 BS ISO 16446:2002. Ships and marine technology. Marine environmental protection. Adaptor for joining dissimilar boom connectors
BS 7973-1:2001 BS 7973-1:2001. Spacers and chairs for steel reinforcement and their specification. Product performance requirements
BS ISO 14368-1:2000 BS ISO 14368-1:2000. Mineral and sapphire watch-glasses. Dimensions and tolerances
BS EN 10154:2002 BS EN 10154:2002. Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions
BS 7961:2004 BS 7961:2004. Specification for a device for measuring the static vertical mass (noseweight)at the coupling point of the towed vehicle.
BS 4274-1:2003 BS 4274-1:2003. Visual acuity test types. Test charts for clinical determination of distance visual acuity. Specification
BS ISO 14612:2004 BS ISO 14612:2004. Ships and marine technology. Ship's bridge layout and associated equipment. Requirements and guidelines for centralized and intergrated bridge functions.
BS ISO 8899:2003 BS ISO 8899:2003. Oil of lemon petitgrain [Citrus limon (L.) Burm.f.]
BS EN 60188:2001, IEC 60188:2001 BS EN 60188:2001, IEC 60188:2001. High-pressure mercury vapour lamps. Performance specifications
ISO15500-14 : 2002 EDTN 1 ISO15500-14 : 2002 EDTN 1. ISO15500-14 : 2002 Road vehicles- Compressed natural gas (CNG) fuel system components. Part 14: Excess flow valve
BS EN 60192:2001, IEC 60192:2001 BS EN 60192:2001, IEC 60192:2001. Low pressure sodium vapour lamps. Performance specification
BS ISO 17399:2003 BS ISO 17399:2003. Space systems. Man-systems integration
BS EN 13836:2006 BS EN 13836:2006. Gas fired central heating boilers. Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1 000 kW
BS EN 13842:2004 BS EN 13842:2004. Oil fired forced convection air heaters. Stationary and transportable for space heating
BS EN ISO 9454-2:2001 BS EN ISO 9454-2:2001. Soft soldering fluxes. Classification and requirements. Performance requirements
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
