BIS Standards Catalogue
ISO6182-7 : 2004 EDTN.1 ISO6182-7 : 2004 EDTN.1. ISO6182-7 : 2004 Fire protection - Automatic sprinkler systems. Part 7: Requirements and test methods for early suppression fast response (ESFR) sprink
ISO7301 : 2002 EDTN 2 ISO7301 : 2002 EDTN 2. ISO7301 : 2002 Rice- Specification
ISO/TR14569-1 : 2007 EDTN1 ISO/TR14569-1 : 2007 EDTN1. ISO/TR 14569-1 Dental materials - Guidance on testing of wear. Part 1: Wear by toothbrushing
ISO/TR14933 : 2001 EDTN 1 ISO/TR14933 : 2001 EDTN 1. ISO/TR14933 : 2001 Road vehicles- Test procedures for evaluating occupant interactions with deploying side impact airbags
ISO770 : 2002 EDTN 2 ISO770 : 2002 EDTN 2. ISO770 : 2002 Oil of eucalyptus globulus (Eucalyptus globulus (Abill)
BS EN ISO 14902:2001 BS EN ISO 14902:2001. Animal feeding stuffs. Determination of trypsin inhibitor activity of soya products
ISO14573 : 2002 EDTN 1 ISO14573 : 2002 EDTN 1. ISO14573 : 2002 Snowboard strap bindings for soft boots- Requirements and test methods
ISO13993 : 2001 EDTN 1 ISO13993 : 2001 EDTN 1. ISO13993 : 2001 Rental ski shop practice- Sampling and inspection of complete and incomplete alpine ski-binding-boot systems in rental applications
ISO13584-24 : 2003 EDTN 1 ISO13584-24 : 2003 EDTN 1. ISO13584-24 : 2003 EDTN 1 Industrial automation systems - Parts Library. Part 24 : Logical model of supplier library
04/19986707 DC 04/19986707 DC. BS EN 1804-4. Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 4. Electro-hydraulic control systems
ISO14131 : 2005 EDTN1 (R08) ISO14131 : 2005 EDTN1 (R08). ISO14131 : 2005 Agricultural sprayers - Boom steadiness - Test methods
BS EN 50191:2001 BS EN 50191:2001. Erection and operation of electrical test equipment
BS 8432:2005 BS 8432:2005. Spinal orthoses. Guide to design
BS ISO 14154:2005 BS ISO 14154:2005. Soil quality. Determination of some selected chlorophenols. Gas-chromatographic method with electron-capture detection
ISO10833 : 2001 EDTN 2 ISO10833 : 2001 EDTN 2. ISO10833 : 2001 Textile floor coverings-Determination of mechanical damage at a cut edge using a modified Vettermann Drum Tester
ISO12710 : 2002 EDTN 1 ISO12710 : 2002 EDTN 1. ISO12710 : 2002 Non-destructive testing- Ultrasonic inspection- Evaluating electronic characteristics of ultrasonic test instruments
BS EN ISO 8442-5:2004 BS EN ISO 8442-5:2004. Materials and articles in contact with foodstuffs. Cutlery and holloware. Specification for sharpness and edge retention test of cutlery
BS EN 61685:2002, IEC 61685:2001 BS EN 61685:2002, IEC 61685:2001. Ultrasonics. Flow measurement systems. Flow test object
ISO13641-2 : 2003 EDTN 1 ISO13641-2 : 2003 EDTN 1. ISO13641-2 : 2003 Water quality- Determination of inhibition of activity of anaerobic bacteria. Part 2: Test at low biomass concentrations
ISO13625 : 2002 EDTN 1 ISO13625 : 2002 EDTN 1. ISO13625 : 2002 Petroleum & Natural Gas industries- Drilling & Production Equipment- Desing,Rating & Testing of Marine Drilling Riser Couplin
ISO13626 : 2003 EDTN 1 ISO13626 : 2003 EDTN 1. ISO13626 : 2003 Petroleum and natural gas industries - Drilling and production equipment - Drilling and well servicing structures - Specification
WD/BSISO14560 : 2004 WD/BSISO14560 : 2004. Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million
WD/ISO14572 : 2001 EDTN 1 WD/ISO14572 : 2001 EDTN 1. ISO14572 : 2001 Road vehicles- Round, unscreened, 60 V and 600 V multicore sheathed cables- Test methods and requirements for basic and high perfor
ISO/IEC15816 : 2002 EDTN 1 ISO/IEC15816 : 2002 EDTN 1. ISO/IEC15816 : 2002 Information technology- Security techniques- Security information objects (SIOs)
WD/ISO14607 : 2002 EDTN 1 WD/ISO14607 : 2002 EDTN 1. ISO14607 : 2002 Implants for surgery- Mammary implants
ISO/TS12104 : 2003 EDTN1 ISO/TS12104 : 2003 EDTN1. ISO/TS12104 : 2003 Road vehicles - Shift pattern of mechanical gearboxes with power-assisted gear change
WD/ISO/TS14167 : 2003 EDTN 1 WD/ISO/TS14167 : 2003 EDTN 1. ISO/TS14167 : 2003 Gas analysis- General quality assurance aspects in the use and preparation of reference gas mixtures- Guidelines
PD CR 13933:2000, CR 13933:2000 PD CR 13933:2000, CR 13933:2000. Masonry cement. Testing for workability (cohesivity)
BS EN 2591-100:2005 BS EN 2591-100:2005. Aerospace series. Elements of electrical and optical connection. Test methods. General
04/19987805 DC 04/19987805 DC. BS ISO 14505-1. Ergonomics of the thermal environment. Evaluation of thermal environment in vehicles. Part 1. Principles and methods for assessment of thermal stress
BS EN 50260-2-14:2002 BS EN 50260-2-14:2002. Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for routers and laminate trimmers
BS EN 50260-2-10:2002 BS EN 50260-2-10:2002. Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for reciprocating saws
BS EN 50260-2-7:2002 BS EN 50260-2-7:2002. Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for spray guns
BS EN 50260-2-6:2002 BS EN 50260-2-6:2002. Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for hammers
BS EN 50260-2-5:2002 BS EN 50260-2-5:2002. Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for circular saws and circular knives
BS EN 50260-2-4:2002 BS EN 50260-2-4:2002. Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for sanders
BS EN 50260-2-2:2002 BS EN 50260-2-2:2002. Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for screwdrivers and impact wrenches
BS EN 50260-2-1:2002 BS EN 50260-2-1:2002. Safety of hand-held battery-powered motor-operated tools and battery packs. Particular requirements for drills
BS EN 50260-1:2002 BS EN 50260-1:2002. Safety of hand-held battery-powered motor-operated tools and battery packs. General requirements
BS EN 61192-2:2003 BS EN 61192-2:2003. Workmanship requirements for soldered electronic assemblies. Surface-mount assemblies
BS EN 61391-1:2006 BS EN 61391-1:2006. Ultrasonics. Pulse-echo scanners. Techniques for calibrating spatial measurement systems and measurement of system point-spread function response
BS EN 13634:2002 BS EN 13634:2002. Protective footwear for professional motorcycle riders. Requirements and test methods
BS EN 13594:2002 BS EN 13594:2002. Protective gloves for professional motorcycle riders. Requirements and test methods
ISO11873 : 2005 EDTN1 ISO11873 : 2005 EDTN1. ISO11873 : 2005 Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders - Infrared detection method
BS ISO 3601-3:2005 BS ISO 3601-3:2005. Fluid power systems. O-rings. Quality acceptance criteria
WD/ISO3601-1 : 2002 EDTN 3 WD/ISO3601-1 : 2002 EDTN 3. ISO3601-1 : 2002 Fluid systems- Sealing devices- O-rings. Part 1: Inside diameters, cross-sections tolerances and size identification code
ISO14254 : 2001 EDTN 1 ISO14254 : 2001 EDTN 1. ISO14254 : 2001 Soil quality - Determination of exchangable acidity of barium chloride extract
ISO14256-1 : 2003 EDTN 1 ISO14256-1 : 2003 EDTN 1. ISO14256-1 : 2003 Soil quality- Determination of nitrate, nitrite and ammonium in field moist soils by extraction with potassium chloride solution. P
BS 6656:2002 BS 6656:2002. Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide
BS EN ISO 10088:2001 BS EN ISO 10088:2001. Small craft. Permanently installed fuel systems and fixed fuel tanks
BS EN 14730-1:2006 BS EN 14730-1:2006. Railway applications. Track. Aluminothermic welding of rails. Approval of welding processes
BS EN 50171:2001 BS EN 50171:2001. Central power supply systems
BS 8403:2002 BS 8403:2002. Specification for aquatic spineboards for recovering casualties in controlled aquatic conditions
ISO128-1 : 2003 EDTN 1 ISO128-1 : 2003 EDTN 1. ISO128-1 : 2003 Technical drawings- General principles of presentation-. Part 1: Basic conventions- Lines
BS 6463-102:2001 BS 6463-102:2001. Quicklime, hydrated lime and natural calcium carbonate. Methods for chemical analysis
ISO13897 : 2003 (R08) EDTN 1 ISO13897 : 2003 (R08) EDTN 1. ISO13897 : 2003 Dental amalgam capsules
ISO/IEC13818-4 : 2004 EDTN2 ISO/IEC13818-4 : 2004 EDTN2. ISO/IEC13818-4 : 2004 Information technology - Generic coding of moving pictures and associated audio information - . Part 4. Conformance testi
BS EN 13402-2:2002 BS EN 13402-2:2002. Size designation of clothes. Primary and secondary dimensions
ISO/IEC14492 : 2001 EDTN 1 ISO/IEC14492 : 2001 EDTN 1. ISO/IEC14492 : 2001 Information technology- Lossy/lossless coding of bi-level images
BS ISO 8015:1985 BS ISO 8015:1985. Technical drawings. Fundamental tolerancing principle
PD IEC TR 62248:2002 PD IEC TR 62248:2002. Approaches to conformance and certification testing for design automation standards
ISO13520 : 2002 EDTN 1 ISO13520 : 2002 EDTN 1. ISO13520 : 2002 Standard practice for the estimation of ferrite content in austenitic stainless steel castings
05/19988811 DC 05/19988811 DC. BS EN 15258. Precast concrete products. Retaining wall elements
ISO2173 : 2003 EDTN 2 ISO2173 : 2003 EDTN 2. ISO2173 : 2003 Fruit and vegetable products - Determination of soluble solids content -Refractometric method
BS EN 527-2:2002 BS EN 527-2:2002. Office furniture. Work tables and desks. Mechanical safety requirements
BS 7906-1:2005 BS 7906-1:2005. Use of lifting equipment for performance, broadcast and similar applications. Code of practice for installation, use and removal of above stage equipment (excluding trus
BS EN ISO 5436-1:2001 BS EN ISO 5436-1:2001. Geometrical Product Specifications (GPS). Surface texture: Profile method; Measurement standards. Geometric product specifications (GPS). Surface texture.
BS EN 61029-2-9:2002 BS EN 61029-2-9:2002. Safety of transportable motor-operated tools. Particular requirements for mitre saws
BS ISO 10209-1:1992 BS ISO 10209-1:1992. Technical product documentation. Vocabulary. Terms relating to technical drawings: General and types of drawings
BS 5709:2001 BS 5709:2001. Gaps, gates and stiles. Specification
BS 7870-7.1:2003 BS 7870-7.1:2003. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11
BS 8000-3:2001 BS 8000-3:2001. Workmanship on building sites. Code of practice for masonry
03/108782 DC 03/108782 DC. EN ISO 1942. Dental vocabulary
ISO13355 : 2001 EDTN 1 ISO13355 : 2001 EDTN 1. ISO13355 : 2001 Packaging- Complete, filled transport packages and unit loads- Vertical random vibration test
WD/ISO11979-6 : 2002 EDTN 1 WD/ISO11979-6 : 2002 EDTN 1. ISO11979-6 : 2002 Optics and optical instruments- Intraocular lenses. Part 6: Determination of shelf-life and transport stability
ISO13559 : 2002 EDTN.1 ISO13559 : 2002 EDTN.1. ISO13559 : 2002 Butter, fermented milks and fresh cheese - Enumeration of contaminating microorganisms - Colony count technique at 30C
BS EN ISO 3381:2005 BS EN ISO 3381:2005. Railway applications. Acoustics. Measurement of noise inside railbound vehicles
BS EN ISO 3095:2005 BS EN ISO 3095:2005. Railway applications. Acoustics. Measurement of noise emitted by railbound vehicles
BS EN 13830:2003 BS EN 13830:2003. Curtain walling. Product standard
BS EN 13779:2004 BS EN 13779:2004. Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems
BS EN 60270:2001, IEC 60270:2000 BS EN 60270:2001, IEC 60270:2000. High-voltage test techniques. Partial discharge measurements
BS EN 60052:2002 BS EN 60052:2002. Voltage measurement by means of standard air gaps
BS EN 196-5:2005 BS EN 196-5:2005. Methods of testing cement. Pozzolanicity test for pozzolanic cements
BS EN 196-3:2005 BS EN 196-3:2005. Methods of testing cement. Determination of setting time and soundness
BS EN 196-2:2005 BS EN 196-2:2005. Methods of testing cement. Chemical analysis of cement
BS EN 196-1:2005 BS EN 196-1:2005. Methods of testing cement. Determination of strength
BS EN 61534-1:2003 BS EN 61534-1:2003. Powertrack systems. General requirements
ISO15384 : 2003 EDTN 1 ISO15384 : 2003 EDTN 1. ISO15384 : 2003 Protective clothing for fire fighters- Laboratory test methods and performance requirements for wildland firefighting
BS EN 388:2003 BS EN 388:2003. Protective gloves against mechanical risks
BS EN 12332-2:2002 BS EN 12332-2:2002. Rubber- or plastics-coated fabrics. Determination of bursting strength. Hydraulic method
ISO12716 : 2001 EDTN1 ISO12716 : 2001 EDTN1. ISO12716 : 2001 Non-destructive testing - Acoustic emission inspection - Vocabulary
BS EN 13809:2003 BS EN 13809:2003. Tourism services. Travel agencies and tour operators. Terminology
BS EN 61427:2002 BS EN 61427:2002. Secondary cells and batteries for solar photovoltaic energy systems. General requirements and methods of test
BS EN 50124-2:2001 BS EN 50124-2:2001. Railway applications. Insulation coordination. Overvoltages and related protection
DD CEN/TS 14383-4:2006 DD CEN/TS 14383-4:2006. Prevention of crime. Urban planning and design. Shops and offices
DD CEN/TS 14383-3:2005 DD CEN/TS 14383-3:2005. Prevention of crime. Urban planning and building design. Dwellings
DD ENV 14383-2:2003 DD ENV 14383-2:2003. Prevention of crime. Urban planning and design. Urban planning
BS EN 14383-1:2006 BS EN 14383-1:2006. Prevention of crime. Urban planning and building design. Definition of specific terms
WD/ISO15194 : 2002 EDTN 1 WD/ISO15194 : 2002 EDTN 1. ISO15194 : 2002 In vitro diagnostic systems - Measurement of quantities in samples of biological origin - Description of reference materials
WD/ISO15193 : 2002 EDTN.1 WD/ISO15193 : 2002 EDTN.1. ISO15193 : 2002 In vitro diagnostic systems - Measurement of quantities in samples of biological origin - Presentation of reference measurement pro
BS 5950-2:2001 BS 5950-2:2001. Structural use of steelwork in building. Specification for materials, fabrication and erection. Rolled and welded sections
BS EN 60454-3-19:2003 BS EN 60454-3-19:2003. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Tapes made from various backing mate
BS EN 60454-3-18:2003 BS EN 60454-3-18:2003. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials
BS EN 60454-3-17:2002, IEC 60454-3-17:2001 BS EN 60454-3-17:2002, IEC 60454-3-17:2001. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual mater
BS EN 60454-3-15:2002, IEC 60454-3-15:2001 BS EN 60454-3-15:2002, IEC 60454-3-15:2001. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual mater
BS EN 60454-3-14:2002, IEC 60454-3-14:2001 BS EN 60454-3-14:2002, IEC 60454-3-14:2001. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual mater
DD ENV 1994-2:2001 DD ENV 1994-2:2001. Eurocode 4. Design of composite steel and concrete structures. Composite bridges (together with United Kingdom National Application Document)
ISO/TS19103 : 2005 EDTN1 ISO/TS19103 : 2005 EDTN1. ISO/TS19103 : 2005 Geographic information - Conceptual schema language
BS EN 50119:2001 BS EN 50119:2001. Railway applications. Fixed installations. Electric traction overhead contact lines
BS EN 50291:2001 BS EN 50291:2001. Electrical apparatus for the detection of carbon monoxide in domestic premises. Test methods and performance requirements
BS EN 50238:2003 BS EN 50238:2003. Railway applications. Compatibility between rolling stock and train detection systems
ISO10196 : 2003 EDTN 2 ISO10196 : 2003 EDTN 2. ISO10196 : 2003 Document imaging applications- Recommendations for the creation of original documents
DC01/203086 DC01/203086. Draft British Standard BS IEC 60745-2-6 A2 Safety of hand-held motor-operated electric tools. Part 2-6: Particular requirements for hammers
BS EN 12094-1:2003 BS EN 12094-1:2003. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for electrical automatic control and delay devices
BS EN 50272-2:2001 BS EN 50272-2:2001. Safety requirements for secondary batteries and battery installations. Stationary batteries
ISO14256-2 : 2005 (R08) EDTN1 ISO14256-2 : 2005 (R08) EDTN1. ISO14256-2 : 2005 Soil quality - Determination of nitrate, nitrite and ammonium in field moist soils by extraction with potassium chloride
BS 7972:2001 BS 7972:2001. Safety requirements and test methods for children's bedguards for domestic use
BS 6164:2001 BS 6164:2001. Code of practice for safety in tunnelling in the construction industry
BS EN 12405:2002 BS EN 12405:2002. Gas meters. Gas-volume electronic conversion devices
ISO11393-4 : 2003 EDTN 1 ISO11393-4 : 2003 EDTN 1. ISO11393-4 : 2003 Protective clothing for users of hand-held chain saws. Part 4: Test methods and performance requirements for chain-saw protective g
ISO15322 : 2005 EDTN 1 ISO15322 : 2005 EDTN 1. ISO15322 : 2005 Dried milk and dried milk products - Determination of their behaviour in hot coffee (Coffee test)
ISO15172 : 2005 EDTN1 ISO15172 : 2005 EDTN1. ISO15172 : 2005 Road vehicles - Wheels - Nut seat strength test
04/19985115 DC 04/19985115 DC. BS ISO 15172. Road vehicles. Wheels. Nut seat strength tests
ISO10303-24 : 2001 EDTN 1 ISO10303-24 : 2001 EDTN 1. ISO10303-24 : 2001 Industrial automation systems and integration- Product data representation and exchange. Part 24: Implementation methods: C lang
05/19985193 DC 05/19985193 DC. ISO 10303-221. Industrial automation systems and integration. Product data representation and exchange. Part 221. Application protocol: functional data and their schemat
ISO3515 : 2002 EDTN 3 ISO3515 : 2002 EDTN 3. ISO3515 : 2002 Oil of lavender (Lavandula angustifolia P.Miller)
BS EN 14317-1:2004 BS EN 14317-1:2004. Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products. Specification for bonded and loose-fill p
BS EN 14316-1:2004 BS EN 14316-1:2004. Thermal insulation products for buildings. In-situ thermal insulation formed from expanded perlite (EP) products. Specification for bonded and loose-fill product
BS EN 61000-2-12:2003 BS EN 61000-2-12:2003. Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage pow
BS 903-0:2003 BS 903-0:2003. Physical testing of rubber. General
WD/ISO7718 : 2003 EDTN 2 WD/ISO7718 : 2003 EDTN 2. ISO7718 : 2003 Aircraft- Main deck passenger doors- Interface requirements for connection with passenger-boarding bridge or transfer vehicle
ISO15685 : 2004 EDTN.1 ISO15685 : 2004 EDTN.1. ISO15685 : 2004 Soil quality - Determination of potential nitrification and inhibitiob of nitrification - Rapid test by ammonium oxide
BS EN 60953-3:2002, IEC 60953-3:2001 BS EN 60953-3:2002, IEC 60953-3:2001. Rules for steam turbine thermal acceptance tests. Thermal performance verification tests of retrofitted steam turbines
BS EN 40-2:2004 BS EN 40-2:2004. Lighting columns. General requirements and dimensions
BS EN 13537:2002 BS EN 13537:2002. Requirements for sleeping bags
BS EN 13536:2002 BS EN 13536:2002. Manufactured articles filled with feather and down. Requirements for clothing. Light use
BS EN 13542:2001 BS EN 13542:2001. Manufactured articles filled with feather and down. Method for determining the compressibility index of clothing
04/19985587 DC 04/19985587 DC. BS EN 894-4. Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Part 4. Location and arrangement of displays and control actu
WD/ISO9445 : 2002 EDTN 2 WD/ISO9445 : 2002 EDTN 2. ISO9445 : 2002 Continuously cold-rolled stainless steel narrow strip, wide strip, plate/shee and cut lengths- Tolerances on dimensions and form
WD/ISO9444 : 2002 EDTN 2 WD/ISO9444 : 2002 EDTN 2. ISO9444 : 2002 Hot rolled wide strip and sheet of stainless steel- Tolerances on dimensions and form
BS EN ISO 10211-2:2001 BS EN ISO 10211-2:2001. Thermal bridges in building construction. Heat flows and surface temperatures. Linear thermal bridges
ISO3864-1 : 2002 EDTN 1 ISO3864-1 : 2002 EDTN 1. ISO3864-1 : 2002 Safety colours and safety signs. Part 1: Safety signs in workplaces and public areas- Design principles
DD ENV 13696:2001 DD ENV 13696:2001. Wood and parquet flooring. Determination of elasticity and resistance to wear
BS EN 13595-1:2002 BS EN 13595-1:2002. Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. General requirements
BS EN 1008:2002 BS EN 1008:2002. Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industr
EN13852-1 CORR1 (12/04) EN13852-1 CORR1 (12/04). EN13852-1 : 2004 Cranes - Offshore cranes -. Part 1: General - purpose offshore cranes
BS 6262-7:2005 BS 6262-7:2005. Glazing for buildings. Code of practice for the provision of information
BS 6262-1:2005 BS 6262-1:2005. Glazing for buildings. General methodology for the selection of glazing
BS IEC 60747-8:2000 BS IEC 60747-8:2000. Discrete semiconductor devices and integrated circuits. Field-effect transistors. Additional ratings and characteristics and amds in the measuring methods for
BS EN 13698-1:2003 BS EN 13698-1:2003. Pallet production specification. Construction specification for 800 mm x 1200 mm flat wooden pallets
ISO2692 : 2006 EDTN2 ISO2692 : 2006 EDTN2. Technical drawings - Geometrical tolerancing - Maximum material requirement, Minimum material requirement, Reciprocity requirement
BS EN 61192-1:2003 BS EN 61192-1:2003. Workmanship requirements for soldered electronic assemblies. General
ISO2560 : 2002 EDTN.2 ISO2560 : 2002 EDTN.2. ISO2560 : 2002 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification
WD/ISO13958 : 2002 EDTN 1 WD/ISO13958 : 2002 EDTN 1. ISO13958 : 2002 Concentrates for haemodialysis or haemodiafiltration
WD/ISO13959 : 2002 EDTN 1 WD/ISO13959 : 2002 EDTN 1. ISO13959 : 2002 Water for haemodialysis and related therapies
ISO13960 : 2003 EDTN1 ISO13960 : 2003 EDTN1. ISO13960 : 2003 Cardiovascular implants and artificial organs- Plasmafilters
PD CEN/TR 15135:2005 PD CEN/TR 15135:2005. Welding. Design and non-destructive testing of welds
WD/ISO4952 : 2003 EDTN 2 WD/ISO4952 : 2003 EDTN 2. ISO4952 : 2003 Structural steels with improved atmospheric corrosion resistance
ISO2928 : 2003 EDTN 3 (R08) ISO2928 : 2003 EDTN 3 (R08). ISO2928 : 2003 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase) and natural gas up to 25 bar (2,5 MP
BS ISO 12656:2001 BS ISO 12656:2001. Micrographics. Use of bar codes on aperture cards
BS EN 13583:2001 BS EN 13583:2001. Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of hail resistance
BS EN 13789:2002 BS EN 13789:2002. Industrial valves. Cast iron globe valves
ISO7358 : 2002 EDTN 1 ISO7358 : 2002 EDTN 1. ISO7358 : 2002 Oils of bergamot, lemon, citron and lime, fully or partially reduced in bergaptene Determination of bergaptene content by high performance l
ISO5129 : 2001 EDTN 3 ISO5129 : 2001 EDTN 3. ISO5129 : 2001 Acoustics - measurement of sound pressure levels in the aircraft interior during flight
DD CEN/TS 12666-2:2005 DD CEN/TS 12666-2:2005. Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Guidance for the assessment of conformity
ISO8898 : 2003 EDTN 1 ISO8898 : 2003 EDTN 1. ISO8898 : 2003 Oil of mandarin petitgrain (Citrus reticulata Blanco)
WD/ISO10605 : 2001 EDTN 1 WD/ISO10605 : 2001 EDTN 1. ISO10605 : 2001 Road vehicles- Test methods for electrical disturbances from electrostatic discharge
ISO12616 : 2002 EDTN 1 ISO12616 : 2002 EDTN 1. ISO12616 : 2002 Translation-oriented terminography
ISO10972-3 : 2003 EDTN 1 ISO10972-3 : 2003 EDTN 1. ISO10972-3 : 2003 Cranes- Requirements for mechanisms. Part 3: Tower cranes
BS EN 617:2001 BS EN 617:2001. Continuous handling equipment and systems. Safety and EMC requirements for equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
ISO11835 : 2002 EDTN 2 ISO11835 : 2002 EDTN 2. ISO11835 : 2002 Road vehicles- Motor vehicles with antilock braking systems- Measurement of braking performance
ISO139 : 2005 EDTN2 ISO139 : 2005 EDTN2. ISO139 : 2005 Guidelines for the selection of quality management system consultants and use of their services
DD CEN/TS 15122:2005 DD CEN/TS 15122:2005. Surfaces for sports areas. Determination of resistance of synthetic sports surfaces to repeated impact
ISO10303-204 : 2002 EDTN 1 ISO10303-204 : 2002 EDTN 1. ISO10303-204 : 2002 Industrial automation systems and integration- Product data representation and exchange. Part 204: Application protocol- Mech
DC04/19993047 DC04/19993047. BS EN15501 Cranes - Bridge and gantry cranes
ISO10381-5 : 2005 EDTN1 ISO10381-5 : 2005 EDTN1. ISO10381-5 : 2005 Soil quality - Sampling. Part 5: Guidance on the procedure for the investigation of urban and industrial sites
ISO501 : 2003 EDTN 3 ISO501 : 2003 EDTN 3. ISO501 : 2003 Coal - Determination of the crucible swelling number
WD/ISO3522 : 2006 EDTN3 WD/ISO3522 : 2006 EDTN3. ISO3522 : 2006 Cast aluminium and aluminium alloys. Chemical composition and mechanical properties
ISO115 : 2003 EDTN 1 ISO115 : 2003 EDTN 1. ISO115 : 2003 Unalloyed aluminium ingots for remelting- classification and composition
ISO15763 : 2002 EDTN 1 ISO15763 : 2002 EDTN 1. ISO15763 : 2002 Road vehicles - Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t
BS EN 14963:2006 BS EN 14963:2006. Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods
ISO5982 : 2001 EDTN 2 ISO5982 : 2001 EDTN 2. ISO5982 : 2001 Mechanical vibration and shock- Range of idealized values to characterize seated-body biodynamic response under vertical vibration
BS EN 61158-4:2004 BS EN 61158-4:2004. Fieldbus standard for use in industrial control systems. Data link protocol specification
BS EN 61158-3:2004 BS EN 61158-3:2004. Digital data communications for measurement and control. Fieldbus for use in industrial control systems. Data link service definition
BS EN 60335-2-103:2003 BS EN 60335-2-103:2003. Specification for safety of household and similar electrical appliances. Particular requirements for drives for gates, doors and windows. Particular requ
DD 257-3:2003 DD 257-3:2003. Methods of analysis of wood preservatives and treated timber. Quantitative analysis of permethrin in solutions of wood preservatives in organic solvents
DD 257-5:2003 DD 257-5:2003. Methods of analysis of wood preservatives and treated timber. Determination of carboxylic acid type in zinc and copper carboxylate preservative solutions by gas chromatogr
05/19993827 DC 05/19993827 DC. BS EN 3120. Aerospace series. Titanium alloy TI-P64003. Cold worked and stress relieved. Seamless tube for pressure systems - 4mm ≤ D ≤ 50mm 690 MPa ≤ Rm ≤ 1030 MPa
ISO11264 : 2005 EDTN1 ISO11264 : 2005 EDTN1. ISO11264 : 2005 Soil quality - Determination of herbicides - Method using HPLC with UV-detection
ISO10382 : 2002 EDTN 1 ISO10382 : 2002 EDTN 1. ISO10382 : 2002 Soil quality- Gas chromatographic determination of the contents of polychlorinated biphenyls (PCB) and organochloro pesticides (OCP)
BS 7952:2001 BS 7952:2001. Specification for chemical firelighters in solid form used for the ignition of solid fuels in residential heating and cooking appliances
ISO10464 : 2004 EDTN1 ISO10464 : 2004 EDTN1. ISO10464 : 2004 Gas cyclinders - Refillable welded steel cylinders for liquefied prtroleum gas (LPG) - Periodic inspection and testing
BS EN 60076-10:2001, IEC 60076-10:2001 BS EN 60076-10:2001, IEC 60076-10:2001. Power transformers. Determination of sound levels
ISO8820-4 : 2002 EDTN 1 ISO8820-4 : 2002 EDTN 1. ISO8820-4 : 2002 Road vehicles- Fuses-. Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B)
ISO8820-3 : 2002 EDTN 2 ISO8820-3 : 2002 EDTN 2. ISO8820-3 : 2002 Road vehicles- Fuse-links-. Part 3: Fuse-links with tabs (blade type)
BS EN 61558-2-12:2001 BS EN 61558-2-12:2001. Safety of power transformers, power supply units and similar. Particular requirements for constant voltage transformers
ISO/IEC14776-232 : 2001 EDTN 1 ISO/IEC14776-232 : 2001 EDTN 1. ISO/IEC14776-232 : 2001 Information technology- Small computer system interface (SCSI). Part 232: Serial Bus Protocol 2 (SBP-2)
ISO12168-2 : 2001 EDTN 1 ISO12168-2 : 2001 EDTN 1. ISO12168-2 : 2001 Plain bearings- hydrostatic plain journal bearings without drainage grooves under steady state conditions-. Part 2: Characteristic
ISO12130-3 : 2001 EDTN 1 ISO12130-3 : 2001 EDTN 1. ISO12130-3 : 2001 Plain bearings- Hydrodynamic plain tilting pad thrust bearings under steady-state conditions -. Part 3: Guide values for the calcul
ISO12130-2 : 2001 EDTN 1 ISO12130-2 : 2001 EDTN 1. ISO12130-2 : 2001 Plain bearings- Hydrodynamic plain tilting pad thrust bearings under steady-state conditions -. Part 2: Functions for calculation o
ISO12130-1 : 2001 EDTN 1 ISO12130-1 : 2001 EDTN 1. ISO12130-1 : 2001 Plain bearings- Hydrodynamic plain tilting pad thrust bearings under steady-state conditions -. Part 1: Calculation of tilting pad
BS EN 61558-2-19:2001, IEC EN 61558-2-19:2000 BS EN 61558-2-19:2001, IEC EN 61558-2-19:2000. Safety of power transformers, power supply units and similar. Particular requirements for perturbation atte
BS EN 60427:2001, IEC 60427:2000 BS EN 60427:2001, IEC 60427:2000. Synthetic testing of high-voltage alternating current circuit-breakers
ISO5692-1 : 2004 EDTN.1 (R08) ISO5692-1 : 2004 EDTN.1 (R08). ISO5692-1 : 2004 Agricultural vehicles - mechanical connections on towed vehicles-. Part 1: Dimensions for hitch-rings
BS EN 4434:2005 BS EN 4434:2005. Aerospace series. Copper or copper alloy lightweight conductors for electrical cables. Product standard (normal and tight tolerances)
BS 3680-3Q:2002 BS 3680-3Q:2002. Measurement of liquid flow in open channels. Guidelines for safe working practice in river flow measurement
WD/ISO4040 : 2001 EDTN 4 WD/ISO4040 : 2001 EDTN 4. ISO4040 : 2001 Road vehicles (except motorcyles)- Location of hand controls, indicators and tell-tales
BS 6207-3:2001 BS 6207-3:2001. Mineral insulated cables with a rated voltage not exceeding 750 V. Guide to use
BSISO/IEC15948 : 2004 (CD-ROM) BSISO/IEC15948 : 2004 (CD-ROM). BSISO/IEC15948 : 2004 Information technology - Computer Graphics and image processing - Portable Network Graphics (PNG) : Functional Spec
ISO9455-17 : 2002 EDTN 1 ISO9455-17 : 2002 EDTN 1. ISO9455-17 : 2002 Soft soldering fluxes- Test methods. Part 17 : Surface insulation resistance, comb test and electrochemical migration test of flux
ISO/IEC10589 : 2002 EDTN 2 ISO/IEC10589 : 2002 EDTN 2. ISO/IEC10589 : 2002 Information technology - Telecommunications and information exchange between systems - Intermediate system to Intermediate sy
BS 7979:2001 BS 7979:2001. Specification for limestone fines for use with Portland cement
BS EN 60255-22-6:2001 BS EN 60255-22-6:2001. Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Immunity to conducted disturbances induced by radio frequenc
ISO/IECISP12062-6 : 2003 EDTN 1 ISO/IECISP12062-6 : 2003 EDTN 1. ISO/IECISP12062-6 : 2003 Information technology - International Standardized Profiles AMH2n - Message Handling Systems - Interpersonal
ISO/IECISP12062-5 : 2003 EDTN 3 ISO/IECISP12062-5 : 2003 EDTN 3. ISO/IECISP12062-5 : 2003 Information technology - International Standardized Profiles AMH2n - Message Handling Systems - Interpersonal
ISO/IECISP12062-4 : 2003 EDTN 3 ISO/IECISP12062-4 : 2003 EDTN 3. ISO/IECISP12062-4 : 2003 Information technology - International Standardized Profiles AMH2n - Message Handling Systems - Interpersonal
ISO/IECISP12062-3 : 2003 EDTN 3 ISO/IECISP12062-3 : 2003 EDTN 3. ISO/IECISP12062-3 : 2003 Information technology - International Standardized Profiles AMH2n - Message Handling Systems - Interpersonal
ISO/IECISP12062-2 : 2003 EDTN 3 ISO/IECISP12062-2 : 2003 EDTN 3. ISO/IECISP12062-2 : 2003 Information technology - International Standardized Profiles AMH2n - Message Handling Systems - Interpersonal
ISO/IECISP12062-1 : 2003 EDTN 3 ISO/IECISP12062-1 : 2003 EDTN 3. ISO/IECISP12062-1 : 2003 Information technology- International Standardized Profiles AMH2n - Message Handling Systems- Interpersonal Me
BS 6915:2001 BS 6915:2001. Design and construction of fully supported lead sheet roof and wall coverings. Code of practice
ISO3601-5 : 2002 EDTN 1 ISO3601-5 : 2002 EDTN 1. ISO3601-5 : 2002 Fluid power systems - O-rings. Part 5: Suitability of elastomeric materials for industrial applications
BS 6203:2003 BS 6203:2003. Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications
ISO5349-2 : 2001 EDTN 1 ISO5349-2 : 2001 EDTN 1. ISO5349-2 : 2001 Mechanical vibration - Measurement and assessment of human exposure to hand transmitted-vibration. Part 2: Practical guidance for meas
ISO4306-3 : 2003 (3RD EDTN) HEADER ISO4306-3 : 2003 (3RD EDTN) HEADER. ISO4306-3 : 2003 Cranes - Vocabulary. Tower cranes
BS 6121-1:2005 BS 6121-1:2005. Mechanical cable glands. Armour glands. Requirements and test methods
ISO10691 : 2004 EDTN1 ISO10691 : 2004 EDTN1. ISO10691 : 2004 Gas cylinders - Refillable welded steel cylinders for liquefied petroleum gas (LPG) - Procedures for checking before, during and after fill
WD/ISO4141-4 : 2001 EDTN 1 WD/ISO4141-4 : 2001 EDTN 1. ISO4141-4 : 2001 Road vehicles- Multicore connecting cables. Part 4: Articulation test method and requirements for coiled cable assemblies.
ISO9564-1 : 2002 EDTN 2 ISO9564-1 : 2002 EDTN 2. ISO9564-1 : 2002 Banking- Personal identification number management and security. Part 1: PIN protection principles and techniques
BS EN 50216-6:2002 BS EN 50216-6:2002. Power transformers and reactor fittings. Cooling equipment. Removable radiators for oil-immersed transformers
BS 644:2003 BS 644:2003. Timber windows. Factory assembled windows of various types. Specification
BS EN 50090-8:2001 BS EN 50090-8:2001. Home and building electronic systems (HBES). Conformity assessment of products
ISO/TR15801 : 2004 EDTN.1 ISO/TR15801 : 2004 EDTN.1. Electronic imaging - Information stored electronically - Recommendations for trustworthiness and reliability
BSISO/IEC14756 : 1999 BSISO/IEC14756 : 1999 .
ISO1302 : 2002 EDTN.4 ISO1302 : 2002 EDTN.4. ISO1302 : 2002 Geometrical Product Specifications (GPS) - Indication of surface texture
BS 6375-1:2004 BS 6375-1:2004. Performance of windows and doors. Classification for weathertightness and guidance on selection and specification
ISO14993 : 2001 EDTN1 ISO14993 : 2001 EDTN1. ISO14993 : 2001 Corrosion of metals and alloys Accelerated corrosion testing involving cyclic exposure to salt mist, dry and wet conditions
ISO10426-2 : 2003 EDTN 1 ISO10426-2 : 2003 EDTN 1. ISO10426-2 : 2003 Petroleum and natural gas industries - Cements and materials for well cementing-. Part 2 : Testing of well cements
BS 7935-1:2004 BS 7935-1:2004. Constant amplitude dynamic force calibration. Calibration and verification of non-resonant uniaxial dynamic testing systems. Method
WD/ISO3862-1 : 2001 EDTN 1 WD/ISO3862-1 : 2001 EDTN 1. ISO3862-1 : 2001 Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types- Specification. Part 1: Oil-based fluid
WD/ISO1436-1 : 2001 EDTN 1 WD/ISO1436-1 : 2001 EDTN 1. ISO1436-1 : 2001 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification. Part 1: Oil-based fluid applications
ISO1703 : 2005 EDTN3 ISO1703 : 2005 EDTN3. ISO1703 : 2005 Assembly tools for screws and nuts - Nomenclature
BS EN 61158-5:2004 BS EN 61158-5:2004. Digital data communications for measurement and control. Fieldbus for use in industrial control systems. Application layer service definition
BS EN 61158-6:2004 BS EN 61158-6:2004. Digital data communications for measurement and control. Fieldbus for use in industrial control systems. Application layer protocol specification
BS ISO/IEC 10967-2:2001 BS ISO/IEC 10967-2:2001. Information technology. Language independent arithmetic. Elementary numerical functions
ISO9123 : 2001 EDTN 1 ISO9123 : 2001 EDTN 1. ISO9123 : 2001 Liquid flow measurments in open channels Stage-fall-discharge relations.
WD/ISOTS13571 : 2002 EDTN 1 WD/ISOTS13571 : 2002 EDTN 1. ISO/TS13571 : 2002 Fire hazard analysis- Life threat components of fire
ISO15501-1 : 2001 EDTN 1 ISO15501-1 : 2001 EDTN 1. ISO15501-1 : 2001 Road Vehicles- Compressed natural gas (CNG) fuel systems. Part 1: Safety Requirements
ISO15501-2 : 2001 EDTN 1 ISO15501-2 : 2001 EDTN 1. ISO15501-2 : 2001 Road Vehicles - compressed natural gas fuelling system. Part 2 : Test methods
BS EN 50144-2-15:2001 BS EN 50144-2-15:2001. Safety of hand-held electric motor operated tools. Particular requirements for hedge trimmers
BS EN 50144-2-16:2003 BS EN 50144-2-16:2003. Safety of hand-held electric motor operated tools. Particular requirements for tackers
BS EN 61922:2002 BS EN 61922:2002. High-frequency induction heating installations. Test methods for the determination of power output of the generator
WD/ISO1893 : 2005 EDTN 2 WD/ISO1893 : 2005 EDTN 2. ISO1893 : 2005 Refractory products - Determination of refractoriness-under-load - Differential method with rising temperature
ISO129-1 : 2004 EDTN1 ISO129-1 : 2004 EDTN1. ISO129-1 : 2004 Technical drawings - Technical drawings - Indication of dimensions and tolerances -. Part 1: General principles
ISO/TR15300 : 2001 EDTN 1 ISO/TR15300 : 2001 EDTN 1. ISO/TR15300 : 2001 Application of OSI clinical codification to the classification and coding of dental products
ISO148-1 : 2006 EDTN1 ISO148-1 : 2006 EDTN1. ISO 148-1 Metallic materials - Charpy pendulum impact test. Test method
BS 7923:2004 BS 7923:2004. Electric cables. Internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (Um = 300 kV). Requirements and test methods
ISO14132-1 : 2002 EDTN 1 ISO14132-1 : 2002 EDTN 1. ISO14132-1 : 2002 Optics and optical instruments- Vocabulary for telescopic systems. Part 1: General terms
ISO15031-1 : 2001 EDTN.1 ISO15031-1 : 2001 EDTN.1. ISO15031-1 : 2001 Road vehicles - Communication between vehicle and external equipment for emission related diagnostics. General information
BS EN 12841:2006 BS EN 12841:2006. Personal fall protection equipment. Rope access systems. Rope adjustment devices
BS 6262-4:2005 BS 6262-4:2005. Glazing for buildings. Code of practice for safety related to human impact
BS 7977-1:2002 BS 7977-1:2002. Specification for safety and rational use of energy of domestic gas appliances. Radiant/convectors
ISO14227 : 2001 EDTN 1 ISO14227 : 2001 EDTN 1. ISO14227 : 2001 Small Craft- Compasses
ISO12106 : 2003 EDTN 1 ISO12106 : 2003 EDTN 1. ISO12106 : 2003 Metallic materials- Fatigue testing. Strain control axial fatigue method
ISO12135 : 2002 EDTN 1 ISO12135 : 2002 EDTN 1. ISO12135 : 2002 Metallic materials Unified method of test for the determination of quasistatic fracture toughness
ISO14870 : 2001 EDTN 1 ISO14870 : 2001 EDTN 1. ISO14870 : 2001 Soil quality- Extraction of trace elements by buffered DTPA solution
ISO12576-1 : 2001 (R08) EDTN 1 ISO12576-1 : 2001 (R08) EDTN 1. ISO12576-1 : 2001 Thermal insulation- Insulating materials and products for buildings - Conformity control systems. Part 1: Factory made
ISO14344 : 2002 EDTN 1 ISO14344 : 2002 EDTN 1. ISO14344 : 2002 Welding and allied processes- Flux and gas shielded electrical welding processes- Procurement guidelines for consumables
ISO14343 : 2002 EDTN 1 ISO14343 : 2002 EDTN 1. ISO14343 : 2002 Welding consumables- Wire electrodes, wires and rods for arc welding of stainless and heat resisting steels- Classification
ISO11228-1 : 2003 EDTN 1 ISO11228-1 : 2003 EDTN 1. ISO11228-1 : 2003 Ergonomics- Manual handling. Part 1: Lifting and carrying
BS EN 60819-2:2002, IEC 60819-2:2001 BS EN 60819-2:2002, IEC 60819-2:2001. Non-cellulosic papers for electrical purposes. Methods of test
DD ENV 1729-1:2001 DD ENV 1729-1:2001. Furniture. Chairs and tables for educational institutions. Functional dimensions
BS 7912:2001 BS 7912:2001. Power cables with XLPE insulation and metallic sheath, and their accessories, for rated voltages from 66 kV (Um=72.5 kV) to 132kV (Um=145kV). Requirements and test methods
BS 7922:2004 BS 7922:2004. Electric cables. Fluid-filled, paper- and PPL-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um = 420 kV). Requirement
BS 6498:2002 BS 6498:2002. Guide to preparation of microfilm and other microforms that may be required as evidence
BS 8220-3:2004 BS 8220-3:2004. Guide for security of buildings against crime. Storage, industrial and distribution premises
BS ISO/IEC 14495-1:1999 BS ISO/IEC 14495-1:1999. Information technology. Lossless and near-lossless compression of continuous-tone still images. Baseline (CD-ROM)
BS 7905-1:2001 BS 7905-1:2001. Lifting equipment for performance, broadcast and similar applications. Specification for the design and manufacture of above stage equipment (excluding trusses and tower
BS G 257-3:2004 BS G 257-3:2004. Design of electromagnetic hazard protection of civil aircraft. Guide to clearance and testing
ISO6916-2 : 2001 EDTN 1 ISO6916-2 : 2001 EDTN 1. ISO6916-2 : 2001 Flexible cellular polymeric materials- Sponge and expanded cellular rubber products- Specification. Part 2: Mouldings and extrusions
BS 6262-6:2005 BS 6262-6:2005. Glazing for buildings. Code of practice for special applications
BS 6262-3:2005 BS 6262-3:2005. Glazing for buildings. Code of practice for fire, security and wind loading
BS 6262-2:2005 BS 6262-2:2005. Glazing for buildings. Code of practice for energy, light and sound
BS EN 12284:2003 BS EN 12284:2003. Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
ISO12243 : 2003 (R08) EDTN 1 ISO12243 : 2003 (R08) EDTN 1. ISO12243 : 2003 Medical gloves made from natural rubber latex - Determination of water-extractable protein using the modified Lowry method
ISO10576-1 : 2003 EDTN 1 ISO10576-1 : 2003 EDTN 1. ISO10576-1 : 2003 Statistical methods- Guidelines for the evaluation of conformity with specified requirements. Part 1: General principles
ISO10381-4 : 2003 EDTN 1 ISO10381-4 : 2003 EDTN 1. ISO10381-4 : 2003 Soil quality- Sampling. Part 4: Guidance on the procedure for the investigation of natural and cultivated sites
ISO11222 : 2002 EDTN 1 ISO11222 : 2002 EDTN 1. ISO11222 : 2002 Air quality- Comparison of mean values determined from air quality measurements with prescribed values
ISO16797 : 2004 EDTN.1 ISO16797 : 2004 EDTN.1. ISO16797 : 2004 Nuclear energy - Soxhlet-mode chemical durability test - Application to vitrified matrixes for high-level radioactive waste
ISO6962 : 2004 EDTN2 ISO6962 : 2004 EDTN2. ISO6962 : 2004 Nuclear energy -- Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioacti
BS EN 60455-3-5:2002, IEC 60455-3-5:2001 BS EN 60455-3-5:2002, IEC 60455-3-5:2001. Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Unsaturated p
BS ISO 5530-4:2002 BS ISO 5530-4:2002. Wheat flour (Triticum aestivum L.). Physical characteristics of doughs. Determination of rheological properties using an alveograph
BS ISO 16649-2:2001 BS ISO 16649-2:2001. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of β-glucuronidase-positive Escherichia coli. Colony-count technique at 4
BS ISO 16649-1:2001 BS ISO 16649-1:2001. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of β-glucuronidase-positive Escherichia coli. Colony-count technique at 4
BS EN ISO 14939:2001 BS EN ISO 14939:2001. Animal feeding stuffs. Determination of carbadox content. Method using high performance liquid chromatography
ISO12795 : 2004 EDTN1 ISO12795 : 2004 EDTN1. ISO12795 : 2004 Nuclear fuel technology - Uranium dioxide powder and pellets - Determination of uranium and oxygen/uranium ratio by gravimetric method with
BS EN 12280-2:2002 BS EN 12280-2:2002. Rubber- or plastics-coated fabrics. Accelerated ageing tests. Physical ageing: effect of light or weathering
BS EN 12280-3:2002 BS EN 12280-3:2002. Rubber- or plastics-coated fabrics. Accelerated ageing tests. Environmental ageing
BS EN 13521:2002 BS EN 13521:2002. Footwear. Test methods for uppers, lining and insocks. Thermal insulation
BS EN 13519:2002 BS EN 13519:2002. Footwear. Test methods for uppers. High temperature behaviour
BS EN 13515:2002 BS EN 13515:2002. Footwear. Test methods for uppers and lining. Water vapour permeability and absorption
BS EN 13514:2002 BS EN 13514:2002. Footwear. Test methods for uppers. Delamination resistance
BS EN 13512:2002 BS EN 13512:2002. Footwear. Test methods for uppers and lining. Flex resistance
BS EN 13522:2002 BS EN 13522:2002. Footwear. Test methods for uppers. Tensile strength and elongation
BS EN 13517:2002 BS EN 13517:2002. Footwear. Test methods for uppers, linings and insocks. Colour migration
BS EN 13579:2002 BS EN 13579:2002. Products and systems for the protection and repair of concrete structures. Test methods. Drying test for hydrophobic impregnation
BS EN 13581:2002 BS EN 13581:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of loss of mass of hydrophobic impregnated concrete after free
BS EN 60872-3:2001, IEC 60872-3:2000 BS EN 60872-3:2001, IEC 60872-3:2000. Maritime navigation and radiocommunication equipment and systems. Radar plotting aids. Electronic plotting aid (EPA). Perform
BS EN 62107:2002, IEC 62107:2000 BS EN 62107:2002, IEC 62107:2000. Super video compact disc. Disc-interchange system-specification
BS EN 13584:2003 BS EN 13584:2003. Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep in compression for repair products
BS EN 13578:2003 BS EN 13578:2003. Products and systems for the protection and repair of concrete structures. Test method. Compatibility on wet concrete
BS EN 13580:2002 BS EN 13580:2002. Products and systems for the protection and repair of concrete structures. Test methods. Water absorption and resistance to alkali for hydrophobic impregnations
BS EN 13395-4:2002 BS EN 13395-4:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Application of repair mortar overhead
BS EN 61076-3-103:2004 BS EN 61076-3-103:2004. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors. Detail spe
BS EN 60512-25-2:2002 BS EN 60512-25-2:2002. Connectors for electronic equipment. Tests and measurements. Test 25b. Attenuation (insertion loss). Section 2 Attenuation (insertion loss)
BS ISO 6550-3:2002 BS ISO 6550-3:2002. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M10 glow-plugs
ISO12800 : 2003 (EDTN1) HEADER ISO12800 : 2003 (EDTN1) HEADER. ISO12800 : 2003 Nuclear energy - Fuel technology - Guide to the measurement of the specific
BS EN 60893-2:2004 BS EN 60893-2:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Methods of test
BS EN 50324-1:2002 BS EN 50324-1:2002. Piezoelectric properties of ceramic materials and components. Terms and definitions
DD ISO/TS 13399-3:2007 DD ISO/TS 13399-3:2007. Cutting tool data representation and exchange. Reference dictionary for tool items
DD ISO/TS 13399-4:2007 DD ISO/TS 13399-4:2007. Cutting tool data representation and exchange. Reference dictionary for adaptive items
BS ISO 15860:2006 BS ISO 15860:2006. Space systems. Gas contamination. Measurement methods for field tests
BS ISO 16458:2004 BS ISO 16458:2004. Space systems. Unmanned spacecraft transportation. General requirements
BS ISO 14711:2003 BS ISO 14711:2003. Space systems. Unmanned mission operations concepts. Guidelines for defining and assessing concept products
BS ISO 14619:2003 BS ISO 14619:2003. Space systems. Space experiments. General requirements
BS ISO 14950:2004 BS ISO 14950:2004. Space systems. Unmanned spacecraft operability
BS EN 13380:2001 BS EN 13380:2001. General requirements for components used for renovation and repair of drain and sewer systems outside buildings
BS EN 62013-1:2002 BS EN 62013-1:2002. Caplights for use in mines susceptible to firedamp. General requirements. Construction and testing in relation to the risk of explosion
BS 5990:2006 BS 5990:2006. Specification for direct gas-fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heatin
BS EN 50324-2:2002 BS EN 50324-2:2002. Piezoelectric properties of ceramic materials and components. Methods of measurement. Low power
BS EN 50305:2002 BS EN 50305:2002. Railway applications. Railway rolling stock cables having special fire performance. Test methods
BS 5991:2006 BS 5991:2006. Specification for indirect gas fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heat
BS EN 55022:2006+A1:2007 BS EN 55022:2006+A1:2007. Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
BS EN 60704-2-1:2001 BS EN 60704-2-1:2001. Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particularrequirements. Particular requi
BS EN ISO 13903:2005 BS EN ISO 13903:2005. Animal feeding stuffs. Determination of amino acids content
BS EN 60793-1-30:2002 BS EN 60793-1-30:2002. Optical fibres. Measurement methods and test procedures. Fibre proof test
BS EN 60793-1-31:2002 BS EN 60793-1-31:2002. Optical fibres. Measurement methods and test procedures. Tensile strength
BS EN 60793-1-32:2003 BS EN 60793-1-32:2003. Optical fibres. Measurement methods and test procedures. Coating strippability
BS EN 60793-1-33:2002, IEC 60793-1-33:2001 BS EN 60793-1-33:2002, IEC 60793-1-33:2001. Optical fibres. Measurement methods and test procedures. Stress corrosion susceptibility. Section 33 Stress corro
BS EN 60793-1-21:2002 BS EN 60793-1-21:2002. Optical fibres. Measurement methods and test procedures. Coating geometry. Section 21 Coating geometry
BS EN 60793-1-22:2002 BS EN 60793-1-22:2002. Optical fibres. Measurement methods and test procedures. Length measurement. Section 22: Length measurement methods
BS EN 60793-1-20:2002 BS EN 60793-1-20:2002. Optical fibres. Measurement methods and test procedures. Fibre geometry. Section 20: Fibre geometry measurement methods
BS EN 13558:2003 BS EN 13558:2003. Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes
BS EN ISO 16330:2003 BS EN ISO 16330:2003. Reciprocating positive displacement pumps and pump units. Technical requirements
BS EN 13559:2003 BS EN 13559:2003. Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes
BS EN ISO 15788-2:2004 BS EN ISO 15788-2:2004. Animal and vegetable fats and oils. Determination of stigmastadienes in vegetable oils. Method using high-performance liquid chromatography (HPLC)
BS EN 1788:2001 BS EN 1788:2001. Foodstuffs. Thermoluminescence detection of irradiated food from which silicate minerals can be isolated
BS EN 60264-5-2:2001, IEC 60264-5-2:2001 BS EN 60264-5-2:2001, IEC 60264-5-2:2001. Packaging of winding wires. Cylindrical barrelled delivery spools with conical flanges. Specification for returnable
BS EN 61290-10-1:2003 BS EN 61290-10-1:2003. Optical amplifiers. Test methods. Multichannel parameters. Pulse method using an optical switch and optical spectrum analyzer
BS EN 60461:2001 BS EN 60461:2001. Time and control code for video tape recorders
BS 8451:2004 BS 8451:2004. Rubber hoses for gas welding, cutting and allied processes. High kink-resistant heavy duty welding hose (type H). Specification
BS EN 50326:2002 BS EN 50326:2002. Conductors for overhead lines. Characteristics of greases
BS EN 12312-14:2006 BS EN 12312-14:2006. Aircraft ground support equipment. Specific requirements. Disabled/incapacitated passenger boarding vehicles
BS EN ISO 13849-2:2003 BS EN ISO 13849-2:2003. Safety of machinery. Safety-related parts of control systems. Validation
BS EN ISO 4033:2001 BS EN ISO 4033:2001. Hexagon nuts, style 2. Product grades A and B
BS EN ISO 4032:2001 BS EN ISO 4032:2001. Hexagon nuts, style 1. Product grades A and B
ISO15473 : 2002 EDTN 1 ISO15473 : 2002 EDTN 1. ISO15473 : 2002 Soil Quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions
BS EN 14103:2003 BS EN 14103:2003. Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of ester and linolenic acid methyl ester contents
BS EN 61000-2-2:2002 BS EN 61000-2-2:2002. Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power su
BS ISO 7004:2002 BS ISO 7004:2002. Photography. Industrial radiographic films. Determination of ISO speed, ISO average gradient and ISO gradients G2 and G4 when exposed to X- and gamma-radiation
BS ISO 17900:2002 BS ISO 17900:2002. Agricultural trailers. Balanced and semi-mounted trailers. Determination of payload, vertical static load and axle load
BS EN ISO 10692-1:2001 BS EN ISO 10692-1:2001. Gas cylinders. Gas cylinder valve connections for use in the microelectronics industry. Outlet connections
BS EN 12617-3:2002 BS EN 12617-3:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of early age linear shrinkage for structural bonding agent
BS EN 60704-2-4:2001, IEC 60704-2-4:2001 BS EN 60704-2-4:2001, IEC 60704-2-4:2001. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular
BS EN 13687-1:2002 BS EN 13687-1:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Freeze-thaw cycling with de-icin
BS EN 13687-2:2002 BS EN 13687-2:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Thunder-shower cycling (thermal
BS EN 13687-3:2002 BS EN 13687-3:2002. Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Thermal cycling without de-icing
BS EN 10288:2002 BS EN 10288:2002. Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings
BS EN 13442:2002 BS EN 13442:2002. Wood and parquet flooring and wood panelling and cladding. Determination of the resistance to chemical agents
BS EN 61340-3-1:2002, IEC 61340-3-1:2002 BS EN 61340-3-1:2002, IEC 61340-3-1:2002. Electrostatics. Methods for simulation of electrostatic effects. Human body model (HBM). Component testing
BS EN 61340-3-2:2002 BS EN 61340-3-2:2002. Electrostatics. Methods for simulation of electrostatic effects. Machine model (MM). Component testing
PD IEC TS 62098:2001, IEC TS 62098:2000 PD IEC TS 62098:2001, IEC TS 62098:2000. Evaluation methods for microprocessor-based instruments
BS EN 13446:2002 BS EN 13446:2002. Wood-based panels. Determination of withdrawal capacity of fasteners
BS EN 13647:2002 BS EN 13647:2002. Wood and parquet flooring and wood panelling and cladding. Determination of geometrical characteristics
BS EN 12808-2:2002 BS EN 12808-2:2002. Adhesives and grouts for tiles. Determination of resistance to abrasion
BS EN 12808-3:2002 BS EN 12808-3:2002. Adhesives and grouts for tiles. Determination of flexural and compressive strength
BS EN 12808-4:2002 BS EN 12808-4:2002. Adhesives and grouts for tiles. Determination of shrinkage
BS EN 12808-5:2002 BS EN 12808-5:2002. Adhesives and grouts for tiles. Determination of water absorption
BS EN 1097-10:2002 BS EN 1097-10:2002. Tests for mechanical and physical properties of aggregates. Determination of water suction height
BS EN 50334:2001 BS EN 50334:2001. Marking by inscription for the identification of cores of electric cables
BS EN 61512-2:2002 BS EN 61512-2:2002. Batch control. Data structures and guidelines for languages
BS EN 13653:2004 BS EN 13653:2004. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of shear strength
BS EN 13624:2003 BS EN 13624:2003. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants for instruments used in the
BS ISO 8097:2001 BS ISO 8097:2001. Aircraft. Minimum airworthiness requirements and test conditions for certified air cargo unit load devices
BS EN 13610:2002 BS EN 13610:2002. Chemical disinfectants. Quantitative suspension test for the evaluation of virucidal activity against bacteriophages of chemical disinfectants used in food and indus
BS EN 13649:2002 BS EN 13649:2002. Stationary source emissions. Determination of the mass concentration of individual gaseous organic compounds. Activated carbon and solvent desorption method
BS ISO 11338-2:2003 BS ISO 11338-2:2003. Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbons. Sample preparation, clean-up and determination
BS 1384-2:2001, ISO 5-2:2001 BS 1384-2:2001, ISO 5-2:2001. Photographic density measurements. Geometric conditions for transmission density
BS ISO 14243-1:2002 BS ISO 14243-1:2002. Implants for surgery. Wear of total knee joint prostheses. Loading and displacement parameters for wear-testing machines with load control and corresponding en
BS EN 61978-1:2001, IEC 61978-1:2000 BS EN 61978-1:2001, IEC 61978-1:2000. Fibre optic passive dispersion compensators. Generic specification
BS EN 13657:2002 BS EN 13657:2002. Characterization of waste. Digestion for subsequent determination of aqua regia soluble portion of elements
BS EN 13656:2002 BS EN 13656:2002. Characterization of waste. Microwave assisted digestion with hydrofluoric (HF), nitric (HNO3), and hydrochloric (HCl) acid mixture for subsequent determination of el
BS EN 13138-2:2002 BS EN 13138-2:2002. Buoyant aids for swimming instruction. Safety requirements and test methods for buoyant aids to be held
BS EN 12385-5:2002 BS EN 12385-5:2002. Steel wire ropes. Safety. Stranded ropes for lifts
BS EN 12385-6:2004 BS EN 12385-6:2004. Steel wire ropes. Safety. Stranded ropes for mine shafts
BS EN 12385-7:2002 BS EN 12385-7:2002. Steel wire ropes. Safety. Locked coil ropes for mine shafts
BS EN 12385-8:2002 BS EN 12385-8:2002. Steel wire ropes. Safety. Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons
BS EN 12385-9:2002 BS EN 12385-9:2002. Steel wire ropes. Safety. Locked coil carrying ropes for cableway installations designed to carry persons
BS EN 10311:2005 BS EN 10311:2005. Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
BS EN 12195-1:2003 BS EN 12195-1:2003. Load restraint assemblies on road vehicles. Safety. Calculation of lashing forces
BS EN 12195-3:2001 BS EN 12195-3:2001. Load restraint assemblies on road vehicles. Safety. Lashing chains
BS EN 12195-4:2003 BS EN 12195-4:2003. Load restraint assemblies on road vehicles. Safety. Lashing steel wire ropes
BS ISO 1837:2003 BS ISO 1837:2003. Lifting hooks. Nomenclature
04/30008013 DC 04/30008013 DC. BS ISO 3266. Eyebolts grade 4 for general lifting purposes
BS ISO 10425:2003 BS ISO 10425:2003. Steel wire ropes for the petroleum and natural gas industries. Minimum requirements and terms of acceptance
BS ISO 14242-1:2002 BS ISO 14242-1:2002. Implants for surgery. Wear of total hip joint prostheses. Loading and displacement parameters for wear-testing machines and corresponding environmental conditi
BS EN 60601-1-1:2001 BS EN 60601-1-1:2001. Medical electrical equipment. General requirements for safety. Collateral standard. Safety requirements for medical electrical systems. Section 1.1 Collatera
BS ISO 17339:2002 BS ISO 17339:2002. Ships and marine technology. Sea anchors for survival craft and rescue boats
ISO5944 : 2001 EDTN 1 ISO5944 : 2001 EDTN 1. ISO5944 : 2001 Milk and milk products- Enumeration of coagulase-positive staphylococci Most probable number technique
BS ISO 10727:2002 BS ISO 10727:2002. Tea and instant tea in solid form. Determination of caffeine content. Method using high-performance liquid chromatography
BS EN 50377-3-1:2001 BS EN 50377-3-1:2001. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type SG terminated on IEC 60793-2 cate
BS 8409:2002 BS 8409:2002. Soft indoor play areas. Code of practice
BS ISO 18902:2001 BS ISO 18902:2001. Imaging materials. Processed photographic films, plates and papers. Filing enclosures and storage containers
BS EN 61076-2-102:2002 BS EN 61076-2-102:2002. Connectors for electronic equipment. Circular connectors. Circular connectors with assessed quality. Detail specification for plugs and jacks for externa
BS EN 60770-2:2003 BS EN 60770-2:2003. Transmitters for use in industrial-process control systems. Methods for inspection and routine testing
BS EN 61951-2:2001, IEC 61951-2:2001 BS EN 61951-2:2001, IEC 61951-2:2001. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells.
BS EN 50134-1:2002 BS EN 50134-1:2002. Alarm systems. Social alarm systems. System requirements
BS EN 60793-1-50:2002 BS EN 60793-1-50:2002. Optical fibres. Measurement methods and test procedures. Damp heat (steady state)
BS EN 60793-1-53:2002 BS EN 60793-1-53:2002. Optical fibres. Measurement methods and test procedures. Water immersion
BS EN 60793-1-51:2002 BS EN 60793-1-51:2002. Optical fibres. Measurement methods and test procedures. Dry heat
BS EN 60793-1-52:2002 BS EN 60793-1-52:2002. Optical fibres. Measurement methods and test procedures. Change of temperature
BS EN 61951-1:2001, IEC 61951-1:2001 BS EN 61951-1:2001, IEC 61951-1:2001. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells.
BS EN 61851-1:2001, IEC 61851-1:2001 BS EN 61851-1:2001, IEC 61851-1:2001. Electric vehicle conductive charging system. General requirements
BS EN 61851-22:2002 BS EN 61851-22:2002. Electric vehicle conductive charging system. A.C. electric vehicle charging station
BS ISO 15592-1:2001 BS ISO 15592-1:2001. Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis. Sampling
BS ISO 15592-2:2001 BS ISO 15592-2:2001. Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis. Atmosphere for conditioning and testing
PDIEC/TR61010-3-043 : 2002 PDIEC/TR61010-3-043 : 2002 .
BS EN 61967-1:2002, IEC 61967-1:2002 BS EN 61967-1:2002, IEC 61967-1:2002. Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHz. General conditions and definitions
BS ISO 492:2002 BS ISO 492:2002. Rolling bearings. Radial bearings. Tolerances
BS ISO 16656:2004 BS ISO 16656:2004. Hydraulic fluid power. Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar). Mounting dimensions
BS EN 61967-5:2003 BS EN 61967-5:2003. Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHz. Measurement of conducted emissions. Workbench Faraday Cage method
BS ISO 14807:2001 BS ISO 14807:2001. Photography. Transmission and reflection densitometers. Method for determining performance
BS ISO 2982-2:2001 BS ISO 2982-2:2001. Rolling bearings. Accessories. Locknuts and locking devices. Dimensions
BS 8411:2007 BS 8411:2007. Code of practice for safety nets on construction sites and other works
DD CEN/TS 14159:2004 DD CEN/TS 14159:2004. Textile floor coverings. Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on patt
BS EN 61290-10-2:2003 BS EN 61290-10-2:2003. Optical amplifiers. Test methods. Multichannel parameters. Pulse method using a gated optical spectrum analyzer
BS EN ISO 4027:2003 BS EN ISO 4027:2003. Hexagon socket set screws with cone point
BS EN 50311:2003 BS EN 50311:2003. Railway applications. Rolling stock. D.C. supplied electronic ballasts for lighting fluorescent lamps
BS EN 61290-5-3:2002 BS EN 61290-5-3:2002. Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters. Reflectance tolerance using an electrical spectrum analyser
BS EN 61121:2005 BS EN 61121:2005. Tumble dryers for household use. Methods for measuring the performance
BS EN 50132-5:2001 BS EN 50132-5:2001. Alarm systems. CCTV surveillance systems for use in security applications. Video transmission
BS EN 50132-4-1:2001 BS EN 50132-4-1:2001. Alarm systems. CCTV surveillance systems for use in security applications. Black and white monitors
BS ISO 15593:2001 BS ISO 15593:2001. Environmental tobacco smoke. Estimation of its contribution to respirable suspended particles. Determination of particulate matter by ultraviolet absorbance and by
BS EN 61966-9:2001, IEC 61966-9:2000 BS EN 61966-9:2001, IEC 61966-9:2000. Multimedia systems and equipment. Colour measurement and management. Digital cameras
BS EN 60191-6-8:2001, IEC 60191-6-8:2001 BS EN 60191-6-8:2001, IEC 60191-6-8:2001. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface
ISO/TR16060 : 2003 EDTN 1 ISO/TR16060 : 2003 EDTN 1. ISO/TR16060 : 2003 Destructive tests on welds in metallic materials - Etchants for macroscopic and microscopic examination
BS EN 50201:2001 BS EN 50201:2001. Interfaces for DVB-IRD
BS EN 13683:2003 BS EN 13683:2003. Garden equipment. Integrally powered shredders/chippers. Safety
BS EN 13534:2006 BS EN 13534:2006. Food processing machinery. Curing injection machines. Safety and hygiene requirements
BS EN 13677-1:2003 BS EN 13677-1:2003. Reinforced thermoplastic moulding compounds. Specification for GMT. Designation
ISO16586 : 2003 EDTN 1 ISO16586 : 2003 EDTN 1. ISO16586 : 2003 Soil quality- Determination of soil water content as a volume fraction on basis of known bulk dry density Gravimetric method
BS EN 13677-2:2003 BS EN 13677-2:2003. Reinforced thermoplastic moulding compounds. Specification for GMT. Methods of test and general requirements
BS ISO/IEC 15288:2002 BS ISO/IEC 15288:2002. Systems engineering. System life cycle processes
BS ISO/IEC 14598-6:2001 BS ISO/IEC 14598-6:2001. Information technology. Software production evaluation. Documentation of evaluation modules
BS EN 13677-3:2003 BS EN 13677-3:2003. Reinforced thermoplastic moulding compounds. Specification for GMT. Specific requirements
BS ISO 17126:2005 BS ISO 17126:2005. Soil quality. Determination of the effects of pollutants on soil flora. Screening test for emergence of lettuce seedlings (Lactuca sativa L.)
BS EN 13697:2001 BS EN 13697:2001. Chemical disinfectants and antiseptics. Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants
BS ISO 11318:2002 BS ISO 11318:2002. Cardiac defibrillators. Connector assembly DF-1 for implantable defibrillators. Dimensions and test requirements
BS EN 13640:2002 BS EN 13640:2002. Stability testing of in vitro diagnostic reagents
BS EN 60947-5-6:2001, IEC 60947-5-6:1999 BS EN 60947-5-6:2001, IEC 60947-5-6:1999. Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. DC interfac
BS EN 13641:2002 BS EN 13641:2002. Elimination or reduction of risk of infection related to in vitro diagnostic reagents
PD ISO/IEC TR 9126-2:2003 PD ISO/IEC TR 9126-2:2003. Software engineering. Product quality. External metrics
PD ISO/IEC TR 9126-3:2003 PD ISO/IEC TR 9126-3:2003. Software engineering. Product quality. Internal metrics
BS ISO/IEC 7813:2001 BS ISO/IEC 7813:2001. Identification cards. Financial transaction cards
BS EN 352-1:2002 BS EN 352-1:2002. Hearing protectors. Safety requirements and testing. Ear-muffs
BS EN 352-2:2002 BS EN 352-2:2002. Hearing protectors. Safety requirements and testing. Ear-plugs
BS EN 352-3:2002 BS EN 352-3:2002. Hearing protectors. Safety requirements and testing. Ear-muffs attached to an industrial safety helmet
BS EN 352-6:2002 BS EN 352-6:2002. Hearing protectors. Safety requirements and testing. Ear-muffs with electrical audio input
BS EN 352-7:2002 BS EN 352-7:2002. Hearing protectors. Safety requirements and testing. Level-dependent ear-plugs
BS EN 13819-1:2002 BS EN 13819-1:2002. Hearing protectors. Testing. Physical test methods
BS EN 13819-2:2002 BS EN 13819-2:2002. Hearing protectors. Testing. Acoustic test methods
BS EN 458:2004 BS EN 458:2004. Hearing protectors. Recommendations for selection, use, care and maintenance. Guidance document
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
