BIS Standards Catalogue
BS EN 60825-2:2004+A1:2007 BS EN 60825-2:2004+A1:2007. Safety of laser products. Safety of optical fibre communication systems (OFCS)
BS EN 14758-1:2005+A1:2009 BS EN 14758-1:2005+A1:2009. Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifiers (PP-MD). Specifications for pipe
BS EN ISO 3093:2007 BS EN ISO 3093:2007. Wheat, rye and respective flours, durum wheat and durum wheat semolina. Determination of the Falling Number according to Hagberg-Perten
BS 25999-1:2006 (Spanish) (Paperback) BS 25999-1:2006 (Spanish) (Paperback). BS 25999-1:2006 Business continuity management . Code of practice
BS EN ISO 14183:2008 BS EN ISO 14183:2008. Animal feeding stuffs. Determination of monensin, narasin and salinomycin contents. Liquid chromatographic method using post-column derivatization
BS EN 1916:2002 BS EN 1916:2002. Concrete pipes and fittings, unreinforced, steel fibre and reinforced
BS EN 1917:2002 BS EN 1917:2002. Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
ISO/IEC19776-1 : 2005 (CD-ROM) EDTN1 ISO/IEC19776-1 : 2005 (CD-ROM) EDTN1. . Part 1. Extensible Markup Language (XML) encoding
BS EN 14958:2006+A1:2009 BS EN 14958:2006+A1:2009. Food processing machinery. Machinery for grinding and processing flour and semolina. Safety and hygiene requirements
BS ISO 281:2007 BS ISO 281:2007. Rolling bearings. Dynamic load ratings and rating life
BS 1339-3:2004 BS 1339-3:2004. Humidity. Guide to the measurement of humidity
BS EN 13959:2004 BS EN 13959:2004. Anti-pollution check valves. DN 6 to DN 250 inclusive Family E, type A, B, C, and D
BS EN 14451:2005 BS EN 14451:2005. Devices to prevent pollution by backflow of potable water. In-line anti-vacuum valves DN 8 to DN 80. Family D, type A
BS 8427:2004 BS 8427:2004. Jug water filter systems. Specification
BS EN 50131-1:2006+A1:2009 BS EN 50131-1:2006+A1:2009. Alarm systems. Intrusion and hold-up systems. System requirements
BS EN 62061:2005 BS EN 62061:2005. Safety of machinery. Functional safety of safety-related electrical, electronic and programmable electronic control systems
BS EN 12635:2002+A1:2008 BS EN 12635:2002+A1:2008. Industrial, commercial and garage doors and gates. Installation and use
BS EN 1760-3:2004+A1:2009 BS EN 1760-3:2004+A1:2009. Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive bumpers, plates, wi
BS EN 13862:2001+A1:2009 BS EN 13862:2001+A1:2009. Floor cutting-off machines. Safety
BS EN 12921-2:2005+A1:2008 BS EN 12921-2:2005+A1:2008. Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours. Safety of machines using water based cleaning liqui
BS EN 12921-3:2005+A1:2008 BS EN 12921-3:2005+A1:2008. Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours. Safety of machines using flammable cleaning liquids
BS EN 12921-4:2005+A1:2008 BS EN 12921-4:2005+A1:2008. Machines for surface cleaning and pretreatment of industrial items using liquids and vapours. Safety of machines using halogenated solvents
BS EN 12981:2005+A1:2009 BS EN 12981:2005+A1:2009. Coating plants. Spray booths for application of organic powder coating material. Safety requirements
BS EN 13355:2004+A1:2009 BS EN 13355:2004+A1:2009. Coating plants. Combined booths. Safety requirements
BS EN 14462:2005+A1:2009 BS EN 14462:2005+A1:2009. Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3
BS EN ISO 9902-7:2001+A1:2009 BS EN ISO 9902-7:2001+A1:2009. Textile machinery. Noise test code. Dyeing and finishing machines
BS EN 60335-2-76:2005+A1:2006 BS EN 60335-2-76:2005+A1:2006. Household and similar electrical appliances. Safety. Particular requirements for electric fence energizers
BS EN 60335-1:2002+A2:2006 BS EN 60335-1:2002+A2:2006. Household and similar electrical appliances. Safety. General requirements
BS EN 50121-1:2006 BS EN 50121-1:2006. Railway applications. Electromagnetic compatibility. General
BS EN 50121-2:2006 BS EN 50121-2:2006. Railway applications. Electromagnetic compatibility. Emissions of the whole railway system to the outside world
BS EN 50121-3-1:2006 BS EN 50121-3-1:2006. Railway applications. Electromagnetic compatibility. Rolling stock. Train and complete vehicle
BS EN 50121-3-2:2006 BS EN 50121-3-2:2006. Railway applications. Electromagnetic compatibility. Rolling stock. Apparatus
BS EN 50121-4:2006 BS EN 50121-4:2006. Railway applications. Electromagnetic compatibility. Emission and immunity of the signalling and telecommunications apparatus
BS EN 50121-5:2006 BS EN 50121-5:2006. Railway applications. Electromagnetic compatibility. Emission and immunity of fixed power supply installations and apparatus
BS EN 14375:2003 BS EN 14375:2003. Child-resistant non-reclosable packaging for pharmaceutical products. Requirements and testing
BS ISO 6336-1:2006 BS ISO 6336-1:2006. Calculation of load capacity of spur and helical gears. Basic principles, introduction and general influence factors
BS ISO 6336-2:2006 BS ISO 6336-2:2006. Calculation of load capacity of spur and helical gears. Calculation of surface durability (pitting)
BS ISO 6336-3:2006 BS ISO 6336-3:2006. Calculation of load capacity of spur and helical gears. Calculation of tooth bending strength. Corrigendum 1
BS ISO 5006:2006 BS ISO 5006:2006. Earth-moving machinery. Operator's field of view. Test method and performance criteria
BS EN ISO 4498:2007 BS EN ISO 4498:2007. Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness
BS EN ISO 10081-1:2005 BS EN ISO 10081-1:2005. Classification of dense shaped refractory products. Alumina-silica
BS EN ISO 10081-2:2005 BS EN ISO 10081-2:2005. Classification of dense shaped refractory products. Basic products containing less than 7 % residual carbon
BS EN ISO 10081-3:2005 BS EN ISO 10081-3:2005. Classification of dense shaped refractory products. Basic products containing from 7% to 50% residual carbon
BS EN 1797:2001 BS EN 1797:2001. Cryogenic vessels. Gas/material compatibility
BS EN ISO 5802:2008, BS 848-3:2001 BS EN ISO 5802:2008, BS 848-3:2001. Fans for general purpose. Performance testing in situ
BS ISO 6488:2004 BS ISO 6488:2004. Tobacco and tobacco products. Determination of water Content. Karl Fischer method
BIP 0104:2008 BIP 0104:2008. ISO 9001:2000. The Quality Management Process
BIP 0103:2008 BIP 0103:2008. ISO/IEC 20000: A Pocket Guide
BIP 0106:2008 BIP 0106:2008. Implementing Information Security based on ISO 27001/ISO 17799: A Management Guide
BIP 0105:2008 BIP 0105:2008. Information Security based on ISO 27001/ISO 17799: A Management Guide
BS EN 1670:2007 BS EN 1670:2007. Building hardware. Corrosion resistance. Requirements and test methods
BS EN ISO 6886:2008 BS EN ISO 6886:2008. Animal and vegetable fats and oils. Determination of oxidative stability (accelerated oxidation test)
BS EN ISO 23275-1:2008 BS EN ISO 23275-1:2008. Animal and vegetable fats and oils. Cocoa butter equivalents in cocoa butter and plain chocolate. Determination of the presence of cocoa butter equivalen
BS EN ISO 16851:2004 BS EN ISO 16851:2004. Textile conveyor belts. Determination of the net length of an endless (spliced) conveyor belt
BS ISO/IEC 19790:2006 BS ISO/IEC 19790:2006. Information technology. Security techniques. Security requirements for cryptographic modules
BS ISO 5293:2004 BS ISO 5293:2004. Conveyor belts. Determination of minimum transition distance on three idler rollers
BS ISO 18431-2:2004 BS ISO 18431-2:2004. Mechanical vibration and shock. Signal processing. Time domain windows for Fourier Transform analysis
BS 4A 100:2003 BS 4A 100:2003. Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa
BS EN 60335-2-97:2006+A11:2009 BS EN 60335-2-97:2006+A11:2009. Household and similar electrical appliances. Safety. Particular requirements for drives for rolling shutters, awnings, blinds and similar
BS EN 60335-2-40:2003+A2:2009 BS EN 60335-2-40:2003+A2:2009. Household and similar electrical appliances. Safety. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
BS 8848:2007+A1:2009 BS 8848:2007+A1:2009. Specification for the provision of visits, fieldwork, expeditions, and adventurous activities, outside the United Kingdom
BS EN 1303:2005 BS EN 1303:2005. Building hardware. Cylinders for locks. Requirements and test methods
BS EN 13999-4:2007+A1:2009 BS EN 13999-4:2007+A1:2009. Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of v
BS EN 13999-3:2007+A1:2009 BS EN 13999-3:2007+A1:2009. Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of v
BS EN 14680:2006 BS EN 14680:2006. Adhesives for non-pressure thermoplastic piping systems. Specifications
BS EN 14814:2007 BS EN 14814:2007. Adhesives for thermoplastic piping systems for fluids under pressure. Specifications
BS EN 60745-1:2006 BS EN 60745-1:2006. Hand-held motor-operated electric tools. Safety. General requirements
BS 6622:2007 BS 6622:2007. Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV. Requirements and test methods
BSEN60216-3 : 2006 (TEXT) BSEN60216-3 : 2006 (TEXT).
BS EN 50083-8:2002+A11:2008 BS EN 50083-8:2002+A11:2008. Cable networks for television signals, sound signals and interactive services. Electromagnetic compatibility for networks
BS EN 13814:2004 BS EN 13814:2004. Fairground and amusement park machinery and structures. Safety
BS 6700:2006+A1:2009 BS 6700:2006+A1:2009. Design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages Specification
BS EN 60335-2-5:2003+A2:2008 BS EN 60335-2-5:2003+A2:2008. Household and similar electrical appliances. Safety. Particular requirements for dishwashers
BS EN 10293:2005 BS EN 10293:2005. Steel castings for general engineering uses
BS EN 14388:2005 BS EN 14388:2005. Road traffic noise reducing devices. Specifications
BS EN 1912:2004+A3:2009 BS EN 1912:2004+A3:2009. Structural timber. Strength classes. Assignment of visual grades and species
BS EN 1677-5:2001+A1:2008 BS EN 1677-5:2001+A1:2008. Components for slings. Safety. Forged steel lifting hooks with latch. Grade 4
BS EN 1677-6:2001+A1:2008 BS EN 1677-6:2001+A1:2008. Components for slings. Safety. Links. Grade 4
BS EN 13889:2003+A1:2008 BS EN 13889:2003+A1:2008. Forged steel shackles for general lifting purposes. Dee shackles and bow shackles. Grade 6. Safety
BS EN 60810:2003+A1:2008 BS EN 60810:2003+A1:2008. Lamps for road vehicles. Performance requirements
BS IEC 60747-1:2006 BS IEC 60747-1:2006. Semiconductor devices. General
BS EN 1998-2:2005+A1:2009 BS EN 1998-2:2005+A1:2009. Eurocode 8. Design of structures for earthquake resistance. Bridges
BS EN 15326:2007+A1:2009, BS 2000-549:2007 BS EN 15326:2007+A1:2009, BS 2000-549:2007. Bitumen and bituminous binders. Measurement of density and specific Gravity. Capillary-stoppered pyknometer metho
BS EN 14067-4:2005+A1:2009 BS EN 14067-4:2005+A1:2009. Railway applications. Aerodynamics. Requirements and test procedures for aerodynamics on open track
BS EN 15033:2006 BS EN 15033:2006. Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats
BS EN 14491:2006 BS EN 14491:2006. Dust explosion venting protective systems
BS EN 13480-3:2002+A3:2009 BS EN 13480-3:2002+A3:2009. Metallic industrial piping. Design and calculation
BS 4449:2005+A2:2009 BS 4449:2005+A2:2009. Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification
BS EN ISO 4404-1:2006 BS EN ISO 4404-1:2006. Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids. Water-containing fluids
BS EN ISO 4404-2:2003 BS EN ISO 4404-2:2003. Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids. Non-aqueous fluids
BS EN 13795-2:2004+A1:2009 BS EN 13795-2:2004+A1:2009. Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment. Test methods
BS EN 13795-3:2006+A1:2009 BS EN 13795-3:2006+A1:2009. Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment. Performance requirements and perf
BS EN 60898-1:2003+A1:2004 BS EN 60898-1:2003+A1:2004. Electrical accessories. Circuit breakers for overcurrent protection for household and similar installations. Circuit-breakers for a.c. operation
BS EN 13795-1:2002+A1:2009 BS EN 13795-1:2002+A1:2009. Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment. General requirements for manufac
PD 6547:2004+A1:2009 PD 6547:2004+A1:2009. Guidance on the use of BS EN 40-3-1 and BS EN 40-3-3
BS EN 10083-3:2006 BS EN 10083-3:2006. Steels for quenching and tempering. Technical delivery conditions for alloy steels
BS EN 490:2004+A1:2006 BS EN 490:2004+A1:2006. Concrete roofing tiles and fittings for roof covering and wall cladding. Product specifications
BS ISO/IEC 16022:2006 BS ISO/IEC 16022:2006. Information technology. Automatic identification and data capture techniques. Data Matrix bar code symbology specification
BS EN ISO 15796:2008 BS EN ISO 15796:2008. Gas analysis. Investigation and treatment of analytical bias
BS EN 14267:2004 BS EN 14267:2004. Irrigation techniques. Irrigation hydrants
BS EN 14604:2005 BS EN 14604:2005. Smoke alarm devices
BS EN 12470-2:2000+A1:2009 BS EN 12470-2:2000+A1:2009. Clinical thermometers. Phase change type (dot matrix) thermometers
BS EN 12470-4:2000+A1:2009 BS EN 12470-4:2000+A1:2009. Clinical thermometers. Performance of electrical thermometers for continuous measurement
BS EN 13771-1:2003 BS EN 13771-1:2003. Compressor and condensing units for refrigeration. Performance testing and test methods. Refrigerant compressors
BS EN 13108-20:2006 BS EN 13108-20:2006. Bituminous mixtures. Material specifications. Type testing
BS EN 13108-21:2006 BS EN 13108-21:2006. Bituminous mixtures. Material specifications. Factory production control
BS EN ISO 21427-2:2009, BS 6068-5.45:2006 BS EN ISO 21427-2:2009, BS 6068-5.45:2006. Water quality. Evaluation of genotoxicity by measurement of the induction of micronuclei. Mixed population method u
BS EN ISO 12179:2001 BS EN ISO 12179:2001. Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments
BS 5628-1:2005 BS 5628-1:2005. Code of practice for the use of masonry. Structural use of unreinforced masonry
BS 5628-2:2005 BS 5628-2:2005. Code of practice for the use of masonry. Structural use of reinforced and prestressed masonry
BS 5628-3:2005 BS 5628-3:2005. Code of practice for the use of masonry. Materials and components, design and workmanship
BS ISO 20022-1:2004 BS ISO 20022-1:2004. Financial services. UNIversal Financial industry message scheme. Overall methodology and format specifications for inputs to and outputs from the ISO 20022 rep
BS ISO 20022-2:2007 BS ISO 20022-2:2007. Financial services. UNIversal Financial Industry message scheme. Roles and responsibilities of the registration bodies
BS EN 60950-23:2006 BS EN 60950-23:2006. Information technology equipment. Safety. Large data storage equipment
BIP 0108:2008 BIP 0108:2008. Metrics for IT Service Management
BS EN ISO 5983-1:2005 BS EN ISO 5983-1:2005. Animal feeding stuffs. Determination of nitrogen content and calculation of crude protein content. Kjeldahl method
BS EN 1991-1-2:2002 BS EN 1991-1-2:2002. Eurocode 1. Actions on structures. General actions. Actions on structures exposed to fire
BS 7858:2006+A2:2009 BS 7858:2006+A2:2009. Security screening of individuals employed in a security environment. Code of practice
BS EN 3638:2007 BS EN 3638:2007. Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Consumable electrode remelted. Solution and precipitation treated. Sheet, strip and plate. 0,5 mm
BS EN 12417:2001+A2:2009 BS EN 12417:2001+A2:2009. Machine tools. Safety. Machining centres
BS EN 1990:2002+A1:2005 BS EN 1990:2002+A1:2005. Eurocode. Basis of structural design
BS EN 60779:2005 BS EN 60779:2005. Industrial electroheat Equipment. Test methods for electroslag remelting furnaces
BS EN 60519-4:2006 BS EN 60519-4:2006. Safety in electroheat installations. Particular requirements for arc furnace installations
DISC PD0024 ARCHIVAL DOCUMENTS (Text) DISC PD0024 ARCHIVAL DOCUMENTS (Text).
BS EN 12729:2002 BS EN 12729:2002. Devices to prevent pollution by backflow of potable water. Controllable backflow preventer with reduced pressure zone. Family B. Type A
BS EN ISO 14890:2003 BS EN ISO 14890:2003. Conveyor belts. Specification for rubber or plastics covered conveyor belts of textile construction for general use
BS 8461:2005+A1:2009 BS 8461:2005+A1:2009. Football goals. Code of practice for their procurement, installation, maintenance, storage and inspection
BS 8462:2005+A1:2009 BS 8462:2005+A1:2009. Goals for youth football, futsal, mini-soccer and small-sided football. Specification
BS EN ISO 8655-2:2002 BS EN ISO 8655-2:2002. Piston-operated volumetric apparatus. Piston pipettes
BS EN ISO 8655-3:2002 BS EN ISO 8655-3:2002. Piston-operated volumetric apparatus. Piston burettes
BS EN ISO 8655-4:2002 BS EN ISO 8655-4:2002. Piston-operated volumetric apparatus. Dilutors
BS EN ISO 8655-5:2002 BS EN ISO 8655-5:2002. Piston-operated volumetric apparatus. Dispensers
BS EN ISO 8655-6:2002 BS EN ISO 8655-6:2002. Piston-operated volumetric apparatus. Gravimetric methods for the determination of measurement error
BS EN ISO 8655-7:2005 BS EN ISO 8655-7:2005. Piston-operated volumetric apparatus. Non-gravimetric methods for the assessment of equipment performance
BS EN 10324:2004 BS EN 10324:2004. Steel wire and wire products. Hose reinforcement wire
BS EN 62305-2:2006 BS EN 62305-2:2006. Protection against lightning. Risk management
BS EN 1991-1-3:2003 BS EN 1991-1-3:2003. Eurocode 1. Actions on structures. General actions. Snow loads
BS EN 1993-5:2007 BS EN 1993-5:2007. Eurocode 3. Design of steel structures. Piling
BS ISO 6020-2:2006 BS ISO 6020-2:2006. Hydraulic fluid power.Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series. Compact series
BS EN 1591-1:2001+A1:2009 BS EN 1591-1:2001+A1:2009. Flanges and their joints. Design rules for gasketed circular flange connections. Calculation method
BS EN 50288-7:2005 BS EN 50288-7:2005. Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for instrumentation and control cables
BS EN ISO 21487:2006 BS EN ISO 21487:2006. Small craft. Permanently installed petrol and diesel fuel tanks
BS EN ISO 7547:2004 BS EN ISO 7547:2004. Ships and marine technology. Air-conditioning and ventilation of accommodation spaces. Design conditions and basis of calculations
BS EN 62305-3:2006 BS EN 62305-3:2006. Protection against lightning. Physical damage to structures and life hazard
BS EN 12352:2006 BS EN 12352:2006. Traffic control equipment. Warning and safety light devices
BS ISO 4832:2006 BS ISO 4832:2006. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of coliforms. Colony-count technique
BS EN 13617-1:2004+A1:2009 BS EN 13617-1:2004+A1:2009. Petrol filling stations. Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
BS EN 61058-1:2002+A2:2008 BS EN 61058-1:2002+A2:2008. Switches for appliances. General requirements
BS ISO 11269-2:2005 BS ISO 11269-2:2005. Soil quality. Determination of the effects of pollutants on soil flora. Effects of chemicals on the emergence and growth of higher plants
BS EN ISO 6887-2:2003 BS EN ISO 6887-2:2003. Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Spec
BS EN ISO 15212-2:2002 BS EN ISO 15212-2:2002. Oscillation-type density meters. Process instruments for homogeneous liquids
BS EN ISO 3927:2002 BS EN ISO 3927:2002. Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression
BS EN 14600:2005 BS EN 14600:2005. Doorsets and openable windows with fire resisting and/ or smoke control characteristics. Requirements and classification
BS ISO/IEC 14888-3:2006 BS ISO/IEC 14888-3:2006. Information technology. Security techniques. Digital signatures with appendix. Discrete logarithm based mechanisms
BS EN 1999-1-2:2007 BS EN 1999-1-2:2007. Eurocode 9. Design of aluminium structures. Structural fire design
BS EN 50423-3:2005 BS EN 50423-3:2005. Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV. Set of National Normative Aspects
BS EN 1995-1-2:2004 BS EN 1995-1-2:2004. Eurocode 5. Design of timber structures. General. Structural fire design
BS EN 61347-2-13:2006 BS EN 61347-2-13:2006. Lamp controlgear. Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
BS ISO/IEC 18004:2006 BS ISO/IEC 18004:2006. Information technology. Automatic identification and data capture techniques. QR Code 2005 bar code symbology specification
BS EN 619:2002 BS EN 619:2002. Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of unit loads
BS EN 620:2002 BS EN 620:2002. Continuous handling equipment and systems. Safety and EMC requirements for fixed belt conveyors for bulk materials
BS ISO 4525:2003 BS ISO 4525:2003. Metallic coatings. Electroplated coatings of nickel plus chromium on plastics materials
BS EN ISO 6158:2004 BS EN ISO 6158:2004. Metallic coatings. Electrodeposited coatings of chromium for engineering purposes
BS EN ISO 4526:2004 BS EN ISO 4526:2004. Metallic coatings. Electroplated coatings of nickel for engineering purposes
BS EN ISO 17201-1:2005 BS EN ISO 17201-1:2005. Acoustics. Noise from shooting ranges. Determination of muzzle blast by measurement
BS EN ISO 13628-2:2006 BS EN ISO 13628-2:2006. Petroleum and natural gas industries. Design and operation of subsea production systems. Unbonded flexible pipe systems for subsea and marine application
BS EN ISO 9047:2003 BS EN ISO 9047:2003. Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants at variable temperatures
BS 8434-2:2003+A2:2009 BS 8434-2:2003+A2:2009. Methods of test for assessment of the fire integrity of electric cables. Test for unprotected small cables for use in emergency circuits. BS EN 50200 wit
BS EN 12271:2006 BS EN 12271:2006. Surface dressing. Requirements
BS EN ISO 4126-4:2004 BS EN ISO 4126-4:2004. Safety devices for protection against excessive pressure. Pilot operated safety valves
BS EN ISO 4126-7:2003 BS EN ISO 4126-7:2003. Safety devices for protection against excessive pressure. Common data
BS EN ISO 4126-2:2003 BS EN ISO 4126-2:2003. Safety devices for protection against excessive pressure. Bursting disc safety devices
BS EN 60939-1:2005 BS EN 60939-1:2005. Passive filter units for electromagnetic interference suppression. Generic specification
BS EN 60896-21:2004 BS EN 60896-21:2004. Stationary lead-acid batteries. Valve regulated types. Methods of test
BS EN 618:2002 BS EN 618:2002. Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
BS ISO 3272-1:2003 BS ISO 3272-1:2003. Microfilming of technical drawings and other drawing office documents. Operating procedures
BS ISO 18431-1:2005 BS ISO 18431-1:2005. Mechanical vibration and shock. Signal processing. General introduction
BS ISO 15665:2003 BS ISO 15665:2003. Acoustics. Acoustic insulation for pipes, valves and flanges
BS EN 50436-1:2005 BS EN 50436-1:2005. Alcohol interlocks. Test methods and performance requirements. Instruments for drink-driving-offender programs
BS EN 12845:2004+A2:2009 BS EN 12845:2004+A2:2009. Fixed firefighting systems. Automatic sprinkler systems. Design, installation and maintenance
BS ISO/IEC 23026:2006 BS ISO/IEC 23026:2006. Software engineering. Recommended practice for the internet. Web site engineering, web site management, and web site life cycle
BS EN 71-1:2005+A9:2009 BS EN 71-1:2005+A9:2009. Safety of toys. Mechanical and physical properties
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
