BIS Standards Catalogue
ISO16312-1 : 2006 EDTN1 ISO16312-1 : 2006 EDTN1. ISO 16312-1 Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment -
BS EN 50216-5:2002 BS EN 50216-5:2002. Power transformer and reactor fittings. Liquid level, pressure and flow indicators, pressure relief devices and dehydrating breathers
BS EN 50216-8:2005 BS EN 50216-8:2005. Power transformer and reactor fittings. Butterfly valves for insulating liquid circuits
BS EN 60952-2:2004 BS EN 60952-2:2004. Aircraft batteries. Design and construction requirements
BS EN 60952-3:2004 BS EN 60952-3:2004. Aircraft batteries. Product specification and declaration of design and performance (DDP)
BS EN 60952-1:2004 BS EN 60952-1:2004. Aircraft batteries. General test requirements and performance levels
BS EN 60079-0:2006 BS EN 60079-0:2006. Electrical apparatus for explosive gas atmospheres. General requirements
DD ISO/PAS 28003:2006 DD ISO/PAS 28003:2006. Security management systems for the supply chain. Requirements for bodies providing audit and certification of supply chain security management systems
DD ISO/TS 4869-5:2006 DD ISO/TS 4869-5:2006. Acoustics. Hearing protectors. Method for estimation of noise reduction using fitting by inexperienced test subjects
BS EN 50163:2004 BS EN 50163:2004. Railway applications. Supply voltages of traction systems
BS EN 50317:2002 BS EN 50317:2002. Railway applications. Current collection systems. Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact
BS EN 14872:2006 BS EN 14872:2006. Bicycles. Accessories for bicycles. Luggage carriers
BS EN 13001-1:2004 BS EN 13001-1:2004. Crane safety. General design. General principles and requirements
BS EN 13001-2:2004 BS EN 13001-2:2004. Crane safety. General design. Load actions
BS EN 60335-2-6:2003+A2:2008 BS EN 60335-2-6:2003+A2:2008. Household and similar electrical appliances. Safety. Particular requirements for stationary cooking ranges, hobs, ovens and similar appliance
BS EN 60335-2-23:2003+A1:2008 BS EN 60335-2-23:2003+A1:2008. Household and similar electrical appliances. Safety. Particular requirements for appliances for skin or hair care
BS EN 60335-2-32:2003+A1:2008 BS EN 60335-2-32:2003+A1:2008. Household and similar electrical appliances. Safety. Particular requirements for massage appliances
BS EN ISO 18857-1:2006, 6068-2.92:2005 BS EN ISO 18857-1:2006, 6068-2.92:2005. Water quality. Determination of selected alkylphenols. Method for non-filtered samples using liquid-liquid extraction and
BS EN 60335-2-105:2005+A1:2008 BS EN 60335-2-105:2005+A1:2008. Household and similar electrical appliances. Safety. Particular requirements for multifunctional shower cabinets
BS EN 12899-1:2001 BS EN 12899-1:2001. Fixed, vertical road traffic signs. Fixed signs
BS EN ISO 8980-1:2004, BS 2738-6:2004 BS EN ISO 8980-1:2004, BS 2738-6:2004. Ophthalmic optics. Uncut finished spectacle lenses. Specifications for single-vision and multifocal lenses
BS EN 14902:2005 BS EN 14902:2005. Ambient air quality. Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
BS EN 15167-1:2006 BS EN 15167-1:2006. Ground granulated blast furnace slag for use in concrete, mortar and grout. Definitions, specifications and conformity criteria
BS EN 15167-2:2006 BS EN 15167-2:2006. Ground granulated blast furnace slag for use in concrete, mortar and grout. Conformity evaluation
BS ISO 16132:2004 BS ISO 16132:2004. Ductile iron pipes and fittings. Seal coats for cement mortar linings
BS ISO 22762-3:2005 BS ISO 22762-3:2005. Elastomeric seismic-protection isolators. Applications for buildings. Specifications
BS ISO 22762-2:2005 BS ISO 22762-2:2005. Elastomeric seismic-protection isolators. Applications for bridges. Specifications
BS EN ISO 12402-6:2006 BS EN ISO 12402-6:2006. Personal flotation devices. Special purpose lifejackets and buoyancy aids. Safety requirements and additional test methods
BS EN 13135-1:2003 BS EN 13135-1:2003. Cranes. Safety. Design. Requirements for equipment. Electrotechnical equipment
BS EN 60601-1-2:2002, IEC 60601-1-2:2002 BS EN 60601-1-2:2002, IEC 60601-1-2:2002. Medical electrical equipment. General requirements for safety. Collateral standard. Electromagnetic compatibility. Re
DD CEN/TS 13001-3-2:2004 DD CEN/TS 13001-3-2:2004. Cranes. General design. Limit states and proof of competence of wire ropes in reeving systems
DD ISO/PAS 28001:2006 DD ISO/PAS 28001:2006. Security management systems for the supply chain. Best practices for implementing supply chain security. Assessments and plans
BS EN 13956:2005 BS EN 13956:2005. Flexible sheet for waterproofing. Plastic and rubber sheets for roof waterproofing. Definitions and characteristics
BS EN ISO 8980-2:2004, BS 2738-7:2004 BS EN ISO 8980-2:2004, BS 2738-7:2004. Ophthalmic optics. Uncut finished spectacle lenses. Specifications for progressive power lenses
BS ISO 10245-4:2004 BS ISO 10245-4:2004. Cranes. Limiting and indicating devices. Jib cranes
BS ISO 22762-1:2005 BS ISO 22762-1:2005. Elastomeric seismic-protection isolators. Test methods
PD CEN/TR 15588:2007 PD CEN/TR 15588:2007. Hardware for furniture. Terms for hinges and their components
BS 25999-1:2006 BS 25999-1:2006. Business continuity management. Code of practice
DD IEC/TS 62257-9-2:2006 DD IEC/TS 62257-9-2:2006. Recommendations for small renewable energy and hybrid systems for rural electrification. Microgrids
DD IEC/TS 62257-9-3:2006 DD IEC/TS 62257-9-3:2006. Recommendations for small renewable energy and hybrid systems for rural electrification. Integrated system. User interface
DD IEC/TS 62257-9-4:2006 DD IEC/TS 62257-9-4:2006. Recommendations for small renewable energy and hybrid systems for rural electrification. Integrated system. User installation
BSEN12815 : 2001 BSEN12815 : 2001 . BSEN12815 : 2001 Residential cookers fired by solid fuel - Requirements and test methods
BS EN 61000-4-30:2003 BS EN 61000-4-30:2003. Electromagnetic compatibility (EMC). Testing and measurement techniques. Power quality measurement methods
BS 7872:2002 BS 7872:2002. Manned security services. Cash-in-transit services (collection and delivery). Code of practice
BS EN 60745-2-9:2003+A1:2008 BS EN 60745-2-9:2003+A1:2008. Hand-held motor-operated electric tools. Safety. Particular requirements for tappers
DD IEC/PAS 62500:2006 DD IEC/PAS 62500:2006. Process management for avionics. Guide for defining and performing highly accelerated tests in avionic systems
BS EN 60745-2-18:2004+A1:2008 BS EN 60745-2-18:2004+A1:2008. Hand-held motor-operated electric tools. Safety. Particular requirements for strapping tools
BS EN 1364-4:2007 BS EN 1364-4:2007. Fire resistance tests for non-loadbearing elements. Curtain walling. Part configuration
BS EN 60335-2-102:2006 BS EN 60335-2-102:2006. Household and similar electrical appliances. Safety. Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
BS EN 50338:2006 BS EN 50338:2006. Safety of household and similar electrical appliances. Particular requirements for pedestrian-controlled battery powered electrical lawnmowers
BS EN 60335-2-13:2003 BS EN 60335-2-13:2003. Household and similar electrical appliances. Safety. Particular requirements for deep fat fryers, frying pans and similar appliances
BS EN 60335-2-77:2006 BS EN 60335-2-77:2006. Household and similar electrical appliances. Safety. Particular requirements for pedestrian controlled mains-operated lawnmowers
BS ISO/IEC 18046:2006 BS ISO/IEC 18046:2006. Information technology. Automatic identification and data capture techniques. Radio frequency identification device performance test methods
DD CEN ISO/TS 17764-2:2006 DD CEN ISO/TS 17764-2:2006. Animal feeding stuffs. Determination of the content of fatty acids. Gas chromatographic method
BS EN 13965-2:2004 BS EN 13965-2:2004. Characterization of waste. Terminology. Management related terms and definitions
BS EN ISO 3826-1:2003 BS EN ISO 3826-1:2003. Plastics collapsible containers for human blood and blood components. Conventional containers
BS EN ISO 1135-4:2004 BS EN ISO 1135-4:2004. Transfusion equipment for medical use. Transfusion sets for single use
DD CEN/TS 15447:2006 DD CEN/TS 15447:2006. Mounting and fixing in reaction to fire tests under the Construction Products Directive
BS EN ISO 19108:2005 BS EN ISO 19108:2005. Geographic information. Temporal schema
BS EN 10025-6:2004+A1:2009 BS EN 10025-6:2004+A1:2009. Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenche
BIP 0025-4:2007 BIP 0025-4:2007. Effective records management. How to comply with BS ISO 15489-1
BIP 3077:2006 BIP 3077:2006. Risk maker risk taker. A manager's guide to risk - DVD
BS EN 14543:2005+A1:2007 BS EN 14543:2005+A1:2007. Specification for dedicated liquefied petroleum gas appliances. Parasol patio heaters. Flueless radiant heaters for outdoor or amply ventilated area
BS EN ISO 2740:2007 BS EN ISO 2740:2007. Sintered metal materials, excluding hardmetals. Tensile test pieces
BS ISO 14813-1:2007 BS ISO 14813-1:2007. Intelligent transport systems. Reference model architecture(s) for the ITS sector. ITS service domains, service groups and services
BS ISO 13347-3:2004, BS 848-2.3:2004 BS ISO 13347-3:2004, BS 848-2.3:2004. Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. Enveloping surface method
DD CEN/TS 15442:2006 DD CEN/TS 15442:2006. Solid recovered fuels. Methods for sampling
DD CEN/TS 15443:2006 DD CEN/TS 15443:2006. Solid recovered fuels. Methods for laboratory sample preparation
ISO/IECTR26905 : 2006 EDTN1 ISO/IECTR26905 : 2006 EDTN1. ISO/IECTR26905 : 2006 Information technology — Telecommunications and information exchange between systems — Enterprise Communication in Next G
BS EN 13443-2:2005+A1:2007 BS EN 13443-2:2005+A1:2007. Water conditioning equipment inside buildings. Mechanical filters. Particle rating 1 μm to less than 80 μm. Requirements for performance, safety
BS EN 14652:2005+A1:2007 BS EN 14652:2005+A1:2007. Water conditioning equipment inside buildings. Membrane separation devices. Requirements for performance, safety and testing
BS EN 14743:2005+A1:2007 BS EN 14743:2005+A1:2007. Water conditioning equipment inside buildings. Softeners. Requirements for performance, safety and testing
BS EN 14812:2005+A1:2007 BS EN 14812:2005+A1:2007. Water conditioning equipment inside buildings. Chemical dosing systems. Pre-set dosing systems. Requirements for performance, safety and testing
BS EN 14897:2006+A1:2007 BS EN 14897:2006+A1:2007. Water conditioning equipment inside buildings. Devices using mercury low-pressure ultraviolet radiators. Requirements for performance, safety and tes
BS EN 14898:2006+A1:2007 BS EN 14898:2006+A1:2007. Water conditioning equipment inside buildings. Active media filters. Requirements for performance, safety and testing
BS EN 60335-2-25:2002 BS EN 60335-2-25:2002. Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for microwave ovens, including co
DD CLC/TS 60034-20-1:2004 DD CLC/TS 60034-20-1:2004. Rotating electrical machines. Control motors. Stepping motors
BS EN 556-1:2001 BS EN 556-1:2001. Sterilization of medical devices. Requirements for medical devices to be designated "STERILE". Requirements for terminally sterilized medical devices
ERROR ERROR.
BS 4875-5:2001 BS 4875-5:2001. Strength and stability of furniture. Requirements for strength, durability and stability of tables and trolleys for domestic and contract use
BS 7980:2003 BS 7980:2003. Vehicle lifts. Installation, maintenance, thorough examination and safe use. Code of practice
BS ISO 17247:2005 BS ISO 17247:2005. Coal. Ultimate analysis
PD ISO/TR 10064-5:2005 PD ISO/TR 10064-5:2005. Code of inspection practice. Recommendations relative to evaluation of gear measuring instruments
BS ISO 17246:2005 BS ISO 17246:2005. Coal. Proximate analysis
BS EN ISO 15839:2006 BS EN ISO 15839:2006. Water quality. On-line sensors/analysing equipment for water. Specifications and performance tests
BS EN ISO 14172:2003 BS EN ISO 14172:2003. Welding consumables. Covered electrodes for manual metal arc welding of nickel and nickel alloys. Classification
BS EN ISO 6149-1:2007 BS EN ISO 6149-1:2007. Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing. Ports with truncated housing for
BS EN ISO 6149-2:2007 BS EN ISO 6149-2:2007. Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing. Dimensions, design, test methods
BS EN ISO 6149-3:2007 BS EN ISO 6149-3:2007. Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing. Dimensions, design, test methods
BS EN 14139:2002 BS EN 14139:2002. Ophthalmic optics. Specifications for ready-to-wear spectacles
BS EN ISO 8069:2007 BS EN ISO 8069:2007. Dried milk. Determination of content of lactic acid and lactates
BS EN ISO 8968-3:2007 BS EN ISO 8968-3:2007. Milk. Determination of nitrogen content. Block-digestion method (Semi-micro rapid routine method)
BS EN ISO 12625-8:2006 BS EN ISO 12625-8:2006. Tissue paper and tissue products. Water-absorption time and water-absorption capacity, basket-immersion test method
BS EN 12794:2005 BS EN 12794:2005. Precast concrete products. Foundation piles
BS EN 13224:2004 BS EN 13224:2004. Precast concrete products. Ribbed floor elements
KIT 198 KIT 198. BS 5839-1 and BS 5839-6 Standards and Guides. Fire detection and fire alarm systems for buildings
BS EN ISO 1269:2006 BS EN ISO 1269:2006. Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of volatile matter (including water)
BS EN 1433:2002 BS EN 1433:2002. Drainage channels for vehicular and pedestrian areas. Classification, design and testing requirements, marking and evaluation of conformity
BS EN 15553:2007, BS 2000-156:2007 BS EN 15553:2007, BS 2000-156:2007. Petroleum products and related materials. Determination of hydrocarbon types. Fluorescent indicator adsorption method
BS EN ISO 17657-1:2007 BS EN ISO 17657-1:2007. Resistance welding. Welding current measurement for resistance welding. Guidelines for measurement
BS EN ISO 17657-2:2007 BS EN ISO 17657-2:2007. Resistance welding. Welding current measurement for resistance welding. Welding current meter with current sensing coil
BS EN ISO 17657-3:2007 BS EN ISO 17657-3:2007. Resistance welding. Welding current measurement for resistance welding. Current sensing coil
BS EN ISO 17657-4:2007 BS EN ISO 17657-4:2007. Resistance welding. Welding current measurement for resistance welding. Calibration system
BS EN ISO 17657-5:2007 BS EN ISO 17657-5:2007. Resistance welding. Welding current measurement for resistance welding. Verification of welding current measuring system
BS EN ISO 16432:2007 BS EN ISO 16432:2007. Resistance welding. Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s)
DD CEN/TS 15568:2006 DD CEN/TS 15568:2006. Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Sampling strategies
BS EN 12277:2007 BS EN 12277:2007. Mountaineering equipment. Harnesses. Safety requirements and test methods
DD CEN/TS 15558:2007 DD CEN/TS 15558:2007. Fertilizers. Determination of nitric and ammoniacal nitrogen according to Ulsch
DD CEN/TS 15560:2007 DD CEN/TS 15560:2007. Fertilizers. Determination of total nitrogen in calcium cyanamide nitrate free
DD CEN/TS 15561:2007 DD CEN/TS 15561:2007. Fertilizers. Determination of total nitrogen in calcium cyanamide containing nitrates
DD CEN/TS 15562:2007 DD CEN/TS 15562:2007. Fertilizers. Determination of cyanamide nitrogen
BS EN 437:2003+A1:2009 BS EN 437:2003+A1:2009. Tests gases. Test pressures. Appliance categories
BS EN 13674-1:2003+A1:2007 BS EN 13674-1:2003+A1:2007. Railway applications. Track. Rail. Vignole railway rails 46 kg/m and above
BS EN 12416-1:2001 BS EN 12416-1:2001. Fixed firefighting systems. Powder systems. Requirements and test methods for components
BS EN 12416-2:2001 BS EN 12416-2:2001. Fixed firefighting systems. Powder systems. Design, construction and maintenance
BS EN 694:2001 BS EN 694:2001. Fire-fighting hoses. Semi-rigid hoses for fixed systems
BS EN 14540:2004 BS EN 14540:2004. Fire-fighting hoses. Non-percolating layflat hoses for fixed systems
BS EN 1947:2002 BS EN 1947:2002. Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
BS EN 13977:2005 BS EN 13977:2005. Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance
BS EN 13758-1:2002 BS EN 13758-1:2002. Textiles. Solar UV protective properties. Method of test for apparel fabrics
BS EN 13758-2:2003 BS EN 13758-2:2003. Textiles. Solar UV protective properties. Classification and marking of apparel
BS EN 494:2004 BS EN 494:2004. Fibre-cement profiled sheets and fittings. Product specification and test methods
BS EN 15360:2007 BS EN 15360:2007. Fertilizers. Determination of dicyandiamide. Method using high-performance liquid chromatography (HPLC)
BS EN 450-1:2005+A1:2007 BS EN 450-1:2005+A1:2007. Fly ash for concrete. Definition, specifications and conformity criteria
BS EN 13063-1:2005 BS EN 13063-1:2005. Chimneys. System chimneys with clay/ceramic flue liners. Requirements and test methods for sootfire resistance
BS EN 13063-2:2005 BS EN 13063-2:2005. Chimneys. System chimneys with clay/ceramic flue liners. Requirements and test methods under wet conditions
BS EN 13363-1:2003 BS EN 13363-1:2003. Solar protection devices combined with glazing. Calculation of solar and light transmittance. Simplified method
BS EN 13592:2003 BS EN 13592:2003. Plastics sacks for household waste collection. Types, requirements and test methods
BS EN 12697-2:2002 BS EN 12697-2:2002. Bituminous mixtures. Test method for hot mix asphalt. Determination of particle size distribution
BS EN 12697-5:2002 BS EN 12697-5:2002. Bituminous mixtures. Test methods for hot mix asphalt. Determination of the maximum density
BS EN 12697-6:2003 BS EN 12697-6:2003. Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens
BS EN 12697-17:2004 BS EN 12697-17:2004. Bituminous mixtures. Test methods for hot mix asphalt. Particle loss of porous asphalt specimen
BS EN 12697-19:2004 BS EN 12697-19:2004. Bituminous mixtures. Test methods for hot mix asphalt. Permeabilty of specimen
BS EN 12697-22:2003 BS EN 12697-22:2003. Bituminous mixtures. Test methods for hot mix asphalt. Wheel tracking
BS EN 12697-24:2004 BS EN 12697-24:2004. Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fatigue
BS EN 12697-30:2004 BS EN 12697-30:2004. Bituminous mixtures. Test methods for hot mix asphalt . Specimen preparation by impact compactor
BS EN 12697-32:2003 BS EN 12697-32:2003. Bituminous mixtures. Test methods for hot mix asphalt. Laboratory compaction of bituminous mixtures by vibratory compactor
BS EN 12697-33:2003 BS EN 12697-33:2003. Bituminous mixtures. Test methods for hot mix asphalt. Specimen prepared by roller compactor
BS EN 12697-34:2004 BS EN 12697-34:2004. Bituminous mixtures. Test methods for hot mix asphalt . Marshall test
BS EN 12697-35:2004 BS EN 12697-35:2004. Bituminous mixtures. Test methods for hot mix asphalt. Laboratory mixing
BS EN 13454-2:2003 BS EN 13454-2:2003. Binders, composite binders and factory made mixtures or floor screeds based on calcium sulfate. Test methods
BS EN 71-9:2005+A1:2007 BS EN 71-9:2005+A1:2007. Safety of toys. Organic chemical compounds. Requirements
BS EN 847-1:2005 BS EN 847-1:2005. Tools for woodworking. Safety requirements. Milling tools, circular saw blades
BS EN 12101-6:2005 BS EN 12101-6:2005. Smoke and heat control systems. Specification for pressure differential systems. Kits
BS EN ISO 16433:2007 BS EN ISO 16433:2007. Resistance welding. Procedure for seam welding of uncoated and coated low carbon steels
DD CEN/TS 13001-3.1:2004 DD CEN/TS 13001-3.1:2004. Cranes. General design. Limit states and proof of competence of steel structures
BS ISO 1138:2007 BS ISO 1138:2007. Rubber compounding ingredients. Carbon black. Determination of sulfur content
BS EN 14943:2005 BS EN 14943:2005. Transport services. Logistics. Glossary of terms
DD ISO/TS 26844:2006 DD ISO/TS 26844:2006. Milk and milk products. Determination of antimicrobial residues. Tube diffusion test
BS 6644:2005+A1:2008 BS 6644:2005+A1:2008. Specification for installation of gas-fired hot water boilers of rated inputs of between 70kW (net) and 1.8 MW (net) (2nd and 3rd family gases)
BS 5871-2:2005 BS 5871-2:2005. Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances. Inset live fuel effect g
BS ISO 11534:2006 BS ISO 11534:2006. Iron ores. Determination of tin. Flame atomic absorption spectrometric method
ISO16484-5 : 2007 EDTN2 ISO16484-5 : 2007 EDTN2. ISO16484-5 : 2007 Building automation and control systems -. Part 5: Data communication protocol
BS EN 60450:2004 BS EN 60450:2004. Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
BS EN 61338-1-4:2006 BS EN 61338-1-4:2006. Waveguide type dielectric resonators. General information and test conditions. Measurement method of complex relative permittivity for dielectric resonator m
BS EN 12290:2005 BS EN 12290:2005. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of compression properties
BS 8468-1:2006 BS 8468-1:2006. Respiratory equipment for use against chemical, biological, radiological and nuclear (CBRN) agents. Positive pressure, self-contained, open-circuit breathing apparatus.
BS EN 61747-3-1:2006 BS EN 61747-3-1:2006. Liquid crystal display devices. Liquid crystal display (LCD) cells. Blank detail specification
BS ISO 7540:2006 BS ISO 7540:2006. Ground paprika (Capsicum annuum L.). Specification
BS ISO 11629:2004 BS ISO 11629:2004. Cranes. Measurement of the mass of a crane and its components
BS EN ISO/IEC 17025:2005 BS EN ISO/IEC 17025:2005. General requirements for the competence of testing and calibration laboratories
BS EN 13501-5:2005 BS EN 13501-5:2005. Fire classification of construction products and building elements. Classification using data from external fire exposure to roofs tests
BS EN 60958-4:2003+A1:2008 BS EN 60958-4:2003+A1:2008. Digital audio interface. Professional applications (TA4)
DD IEC/TS 60479-1:2005 DD IEC/TS 60479-1:2005. Effects of current on human beings and livestock. General aspects
BS EN ISO 661:2005 BS EN ISO 661:2005. Animal and vegetable fats and oils. Preparation of test sample
PAS 90:2006 PAS 90:2006. Specification for safe working practice for on-site maintenance and repair of industrial trucks
BS EN 14175-1:2003 BS EN 14175-1:2003. Fume Cupboards. Vocabulary
BS EN 14175-2:2003 BS EN 14175-2:2003. Fume cupboards. Safety and performance requirements
BS ISO 3442-2:2005 BS ISO 3442-2:2005. Machine tools. Dimensions and geometric tests for self-centring chucks with two-piece jaws. Power-operated chucks with tongue and groove type jaws
BS ISO 3442-1:2005 BS ISO 3442-1:2005. Machine tools. Dimensions and geometric tests for self-centring chucks with two-piece jaws. Manually operated chucks with tongue and groove type jaws
BS EN 14041:2004 BS EN 14041:2004. Resilient, textile and laminate floor coverings. Essential characteristics
BS EN 60068-2-78:2002, IEC 60068-2-78:2001 BS EN 60068-2-78:2002, IEC 60068-2-78:2001. Environmental testing. Test methods. Test Cab. Damp heat, steady state
BS 4875-7:2006 BS 4875-7:2006. Strength and stability of furniture. Domestic and contract storage furniture. Performance requirements
BS ISO 13380:2002 BS ISO 13380:2002. Condition monitoring and diagnostics of machines. General guidelines on using performance parameters
DD CEN/TS 15440:2006 DD CEN/TS 15440:2006. Solid recovered fuels. Method for the determination of biomass content
BS EN ISO 15546:2007 BS EN ISO 15546:2007. Petroleum and natural gas industries. Aluminium alloy drill pipe
BS EN 13042-1:2007 BS EN 13042-1:2007. Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Gob feeder
BS EN 13042-3:2007 BS EN 13042-3:2007. Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. IS machines
PD IEC/TR 61946:2007 PD IEC/TR 61946:2007. Mineral insulating oils. Characterization of paraffinic /naphthenic nature. Low temperature differential scanning calorimetry (DSC) test method
BS EN ISO 8536-4:2007 BS EN ISO 8536-4:2007. Infusion equipment for medical use. Infusion sets for single use, gravity feed
BS EN 61009-1:2004 BS EN 61009-1:2004. Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's). General rules
BS EN ISO 13628-10:2006 BS EN ISO 13628-10:2006. Petroleum and natural gas industries. Design and operation of subseaprod uction systems. Specification for bonded flexible pipe
BS EN ISO 13679:2006 BS EN ISO 13679:2006. Petroleum and natural gas industries. Procedures for testing casing and tubing connections
BS 8888:2006 BS 8888:2006. Technical product specification (TPS). Specification
BS EN 13458-2:2002 BS EN 13458-2:2002. Cryogenic vessels. Static vacuum insulated vessels. Design, fabrication, inspection and testing
ISO/IEC23360-1 : 2006 EDTN1 ISO/IEC23360-1 : 2006 EDTN1. Linux Standard Base (LSB) core specification 3.1 -. Part 1: Generic specification
ISO/IEC23360-2 : 2006 EDTN1 ISO/IEC23360-2 : 2006 EDTN1. Linux Standard Base (LSB) core specification 3.1 -. Part 2: Specification for IA32 architecture
ISO/IEC23360-3 : 2006 EDTN1 ISO/IEC23360-3 : 2006 EDTN1. Linux Standard Base (LSB) core specification 3.1 -. Part 3: Specification for IA64 architecture
ISO/IEC23360-4 : 2006 EDTN1 ISO/IEC23360-4 : 2006 EDTN1. Linux Standard Base (LSB) core specification 3.1 -. Part 4: Specification for AMD64 architecture
ISO/IEC23360-5 : 2006 EDTN1 ISO/IEC23360-5 : 2006 EDTN1. Linux Standard Base (LSB) core specification 3.1 -. Part 5: Specification for PPC32 architecture
ISO/IEC23360-6 : 2006 EDTN1 ISO/IEC23360-6 : 2006 EDTN1. Linux Standard Base (LSB) core specification 3.1 -. Part 6: Specification for PPC64 architecture
ISO/IEC23360-7 : 2006 EDTN1 ISO/IEC23360-7 : 2006 EDTN1. Linux Standard Base (LSB) core specification 3.1 -. Part 7: Specification for S390 architecture
ISO/IEC23360-8 : 2006 EDTN1 ISO/IEC23360-8 : 2006 EDTN1. Linux Standard Base (LSB) core specification 3.1 -. Part 8: Specification for S390X architecture
BIP 0086:2007 BIP 0086:2007. Freedom of information. A guide for the UK private sector
BS ISO 6104:2005 BS ISO 6104:2005. Superabrasive products. Rotating grinding tools with diamond or cubic boron nitride. General survey, designation and multilingual nomenclature
BS ISO 6105-1:2004 BS ISO 6105-1:2004. Blanks for superabrasive cutting-off wheels. Manually guided cutting-off in building and civil engineering
BS ISO 6105-2:2004 BS ISO 6105-2:2004. Blanks for superabrasive cutting-off wheels. Hand-held cutting-off in building and civil engineering
BS EN ISO 12402-5:2006 BS EN ISO 12402-5:2006. Personal flotation devices. Buoyancy aids (level 50). Safety requirements
BS EN 10028-2:2003 BS EN 10028-2:2003. Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties
DD ISO/TS 16489:2006 DD ISO/TS 16489:2006. Water quality. Guidance for establishing the equivalency of results
BS EN 10028-4:2003 BS EN 10028-4:2003. Flat products made of steels for pressure purposes. Nickel alloy steels with specified low temperature properties
BS5499-11 : 2002 (TEXT) BS5499-11 : 2002 (TEXT). Graphical symbols and signs. Safety signs, including fire safety signs. Water safety signs
BIP 2127:2007 BIP 2127:2007. ISO 22000 Food safety. Guidance and workbook for the catering industry
BS EN 13369:2004+A1:2006 BS EN 13369:2004+A1:2006. Common rules for precast concrete products
BS EN 13225:2004 BS EN 13225:2004. Precast concrete products. Linear structural elements
BS EN 61300-3-29:2006 BS EN 61300-3-29:2006. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements - Measurement techniques f
BS EN ISO 9994:2006+A1:2008 BS EN ISO 9994:2006+A1:2008. Lighters. Safety specification
BS EN 60512-12-2:2006 BS EN 60512-12-2:2006. Connectors for electronic equipment. Tests and measurements. Soldering tests. Test 12b. Solderability, wetting, soldering iron method
BS EN 60512-12-4:2006 BS EN 60512-12-4:2006. Connectors for electronic equipment. Tests and measurements. Soldering tests. Test 12d. Resistance to soldering heat, solder bath method
BS EN 60512-12-5:2006 BS EN 60512-12-5:2006. Connectors for electronic equipment. Tests and measurements. Soldering tests. Test 12e. Resistance to soldering heat, soldering iron method
BS EN 60512-9-3:2006 BS EN 60512-9-3:2006. Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load
BIP 2128:2007 BIP 2128:2007. ISO 22000 Food safety. Guidance and workbook for food manufacturers
BIP 2129:2007 BIP 2129:2007. ISO 22000 Food safety. Guidance and workbook for the retail industry
BS ISO/IEC 15693-2:2006 BS ISO/IEC 15693-2:2006. Identification cards. Contactless integrated circuit cards. Vicinity cards. Air interface and initialization
BS EN 13443-1:2002 BS EN 13443-1:2002. Water conditioning equipment inside buildings. Mechanical filters. Particle rating 80 μm to 150 μm. Requirements for performances, safety and testing
BS EN 15219:2006+A1:2007 BS EN 15219:2006+A1:2007. Water conditioning equipment inside buildings. Nitrate removal devices. Requirements for performance, safety and testing
BS EN 14651:2005+A1:2007 BS EN 14651:2005+A1:2007. Test method for metallic fibre concrete. Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
BS EN 14721:2005+A1:2007 BS EN 14721:2005+A1:2007. Test method for metallic fibre concrete. Measuring the fibre content in fresh and hardened concrete
BS EN 12737:2004+A1:2007 BS EN 12737:2004+A1:2007. Precast concrete products. Floor slats for livestock
BS EN 14125:2004 BS EN 14125:2004. Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
BS ISO 13347-2:2004, BS 848-2.2:2004 BS ISO 13347-2:2004, BS 848-2.2:2004. Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. Reverberant room method
BS EN ISO 19739:2005 BS EN ISO 19739:2005. Natural gas. Determination of sulfur compounds using gas chromatography
BS EN 60335-2-43:2003 BS EN 60335-2-43:2003. Household and similar electrical appliances. Safety. Particular requirements for appliances for clothes dryers and towel rails
BS EN 60684-3-212:2006 BS EN 60684-3-212:2006. Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable polyolefin sleevings
BS EN 60371-3-2:2006 BS EN 60371-3-2:2006. Insulating materials based on mica. Specifications for individual materials. Mica paper
BS EN ISO 15378:2007 BS EN ISO 15378:2007. Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practi
BS EN 60371-3-5:2006 BS EN 60371-3-5:2006. Insulating materials based on mica. Specifications for individual materials. Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI)
BS EN 30-1-3:2003 BS EN 30-1-3:2003. Domestic cooking appliances burning gas. Safety. Appliances having a glass ceramic hotplate
BS EN ISO 17294-1:2006 BS EN ISO 17294-1:2006. Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS). General guidelines
BS EN ISO 16712:2006, BS 6068-5.37:2005 BS EN ISO 16712:2006, BS 6068-5.37:2005. Water quality. Determination of acute toxicity of marine or estuarine sediment to amphipods
BS EN 13530-2:2002 BS EN 13530-2:2002. Cryogenic vessels. Large transportable vacuum insulated vessels. Design, fabrication, inspection and testing
BS EN 60335-2-15:2002 BS EN 60335-2-15:2002. Household and similar electrical appliances. Safety. Particular requirements for appliances for heating liquids
BS EN ISO 4126-1:2004 BS EN ISO 4126-1:2004. Safety devices for protection against excessive pressure. Safety valves
BS 7531:2006 BS 7531:2006. Rubber bonded fibre jointing for industrial and aerospace purposes. Specification
BS EN 60060-3:2006 BS EN 60060-3:2006. High voltage test techniques. Definitions and requirements for on-site tests
BS EN 60998-2-3:2004 BS EN 60998-2-3:2004. Connecting devices for low-voltage circuits for household and similar purposes. Particular requirements for connecting devices as separate entities with insu
BS EN 1123-2:2006+A1:2007 BS EN 1123-2:2006+A1:2007. Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems. Dimensions
BS EN 1836:2005 BS EN 1836:2005. Personal eye-equipment. Sunglasses and sunglare filters for general use and filters for direct observation of the sun
BS ISO 11535:2006 BS ISO 11535:2006. Iron ores. Determination of various elements. Inductively coupled plasma atomic emission spectrometric method
BS ISO 9682-2:2006 BS ISO 9682-2:2006. Iron ores. Determination of manganese content. Periodate spectrophotometric method
PD ISO/IEC Guide 75:2006 PD ISO/IEC Guide 75:2006. Strategic principles for future IEC and ISO standardization in industrial automation
BS EN 827:2005 BS EN 827:2005. Adhesives. Determination of conventional solids content and constant mass solids content
BS EN 12092:2001 BS EN 12092:2001. Adhesives. Determination of viscosity
BS EN 60684-3-233:2006 BS EN 60684-3-233:2006. Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant,
BS EN 62040-2:2006 BS EN 62040-2:2006. Uninterruptible power systems (UPS). Electromagnetic compatibility (EMC) requirements
BS EN ISO 15605:2004 BS EN ISO 15605:2004. Adhesives. Sampling
BS EN 542:2003 BS EN 542:2003. Adhesives. Determination of density
BS EN 543:2003 BS EN 543:2003. Adhesives. Determination of apparent density of powder and granule adhesives
BS EN 4057-100:2006 BS EN 4057-100:2006. Aerospace series. Cable ties for harnesses. Test methods. General
BS EN 4057-302:2006 BS EN 4057-302:2006. Aerospace series. Cable ties for harnesses. Test methods. Flammability
BS EN 4057-304:2006 BS EN 4057-304:2006. Aerospace series. Cable ties for harnesses. Test methods. Loop tensile strength at maximum working temperature
BS EN 4057-306:2006 BS EN 4057-306:2006. Aerospace series. Cable ties for harnesses. Test methods. Heat ageing test
BS EN 4057-401:2006 BS EN 4057-401:2006. Aerospace series. Cable ties for harnesses. Test methods. Loop tensile strength
BS EN 4057-402:2006 BS EN 4057-402:2006. Aerospace series. Cable ties for harnesses. Test methods. Life cycle
BS EN 4057-404:2006 BS EN 4057-404:2006. Aerospace series. Cable ties for harnesses. Test methods. Low temperature installation
BS EN 4057-406:2006 BS EN 4057-406:2006. Aerospace series. Cable ties for harnesses. Test methods. Locking device retention
BS ISO 11228-2:2007 BS ISO 11228-2:2007. Ergonomics. Manual handling. Pushing and pulling
BIP 2020:2007 BIP 2020:2007. Beyond Registration. Getting the best from ISO 9001 and business improvement
BIP 2036:2007 BIP 2036:2007. The Risk Management Universe: A guided tour. 2nd edition
BS EN ISO 13850:2006 BS EN ISO 13850:2006. Safety of machinery. Emergency stop. Principles for design
BS EN ISO 19903:2006 BS EN ISO 19903:2006. Petroleum and natural gas industries. Fixed concrete offshore structures
BS EN ISO 19904-1:2006 BS EN ISO 19904-1:2006. Petroleum and natural gas industries. Floating offshore structures. Monohulls, semi-submersibles and spars
BIP 2113:2007 BIP 2113:2007. Demonstration of conformity to a standard. A practical guide for suppliers and their customers
BS EN 14476:2005 BS EN 14476:2005. Chemical disinfectants and antiseptics. Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine. Test method and req
BS EN 420:2003 BS EN 420:2003. Protective gloves. General requirements and test methods
BS EN 60664-4:2006 BS EN 60664-4:2006. Insulation coordination for equipment within low-voltage systems. Consideration of high-frequency voltage stress
BS EN ISO 19114:2005 BS EN ISO 19114:2005. Geographic information. Quality evaluation procedures
BS EN 61347-2-1:2001, IEC 61347-2-1:2000 BS EN 61347-2-1:2001, IEC 61347-2-1:2000. Lamp controlgear. Particular requirements for starting devices (other than glow starters)
BS EN 13261:2003 BS EN 13261:2003. Railway applications. Wheelsets and bogies. Axles. Product requirements
BS EN 469:2005 BS EN 469:2005. Protective clothing for firefighters. Performance requirements for protective clothing for firefighting
BS EN 62358:2004 BS EN 62358:2004. Ferrite cores. Standard inductance factor (AL) and its tolerance
BS EN 1218-5:2004 BS EN 1218-5:2004. Safety of woodworking machines. Tenoning machines. One side profiling machines with fixed table and feed rollers or fed by chain
BS EN 1870-11:2003 BS EN 1870-11:2003. Safety of woodworking machines. Circular sawing machines. Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
BS EN 14876:2007 BS EN 14876:2007. Transportable gas cylinders. Periodic inspection and testing of welded steel pressure drums
BS EN ISO 15011-4:2006+A1:2008 BS EN ISO 15011-4:2006+A1:2008. Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Fume data sheets
BS EN 287-1:2004 BS EN 287-1:2004. Qualification test of welders. Fusion welding. Steels
BS ISO 13347-4:2004, BS 848-2.4:2004 BS ISO 13347-4:2004, BS 848-2.4:2004. Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. Sound intensity method
DD ISO/TS 13399-50:2007 DD ISO/TS 13399-50:2007. Cutting tool data representation and exchange. Reference dictionary for reference systems and common concepts
DD ISO/TS 13399-60:2007 DD ISO/TS 13399-60:2007. Cutting tool data representation and exchange. Reference dictionary for connection systems
PD IEC TR 60870-6-505:2002 PD IEC TR 60870-6-505:2002. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendations. TASE.2 User guide
BS ISO 10625:2005 BS ISO 10625:2005. Equipment for crop protection. Sprayer nozzles. Colour coding for identification
BS EN 62271-102:2002 BS EN 62271-102:2002. High-voltage switchgear and controlgear. Alternating current disconnectors and earthing switches
BS ISO 13347-1:2004, BS 848-2.1:2004 BS ISO 13347-1:2004, BS 848-2.1:2004. Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. General overview
BS EN ISO 13628-7:2006 BS EN ISO 13628-7:2006. Petroleum and natural gas industries. Design and operation of subsea production systems. Completion/workover riser systems
BS EN 153:2006 BS EN 153:2006. Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers and their combinations, toget
BS EN ISO 13501:2006 BS EN ISO 13501:2006. Petroleum and natural gas industries. Drilling fluids. Processing systems evaluation
BS ISO 844:2007 BS ISO 844:2007. Rigid cellular plastics. Determination of compression properties
PD ISO/TR 20573:2006 PD ISO/TR 20573:2006. Footwear. Performance requirements for components for footwear. Heels and top pieces
ISO/IEC14543-3-3 : 2007 EDTN 1 ISO/IEC14543-3-3 : 2007 EDTN 1. ISO/IEC14543-3-3 : 2007 Information technology - Home electronic system (HES) architecture -. Part 3-3 : User process for network based c
ISO/IEC14543-3-4 : 2007 EDTN1 ISO/IEC14543-3-4 : 2007 EDTN1. ISO/IEC14543-3-4 : 2007 Information technology - Home electronic system (HES) architecture -. Part 3-4 : System management - Management pro
ISO/IEC14543-3-7 : 2007 EDTN1 ISO/IEC14543-3-7 : 2007 EDTN1. ISO/IEC14543-3-7 : 2007 Information technology - Home electronic system (HES) architecture. Part 3-7 : Media and media dependent layers - R
BS EN 14864:2005 BS EN 14864:2005. Vitreous and porcelain enamels. Enamel coatings applied to steel for writing surfaces. Specification
BS EN 13565-1:2003+A1:2007 BS EN 13565-1:2003+A1:2007. Fixed firefighting systems. Foam systems. Requirements and test methods for components
BS EN 60062:2005 BS EN 60062:2005. Marking codes for resistors and capacitors
BS EN 60335-2-69:2003+A2:2008 BS EN 60335-2-69:2003+A2:2008. Household and similar electrical appliances. Safety. Particular requirements for wet and dry vacuum cleaners, including power brush, for in
BS EN 50117-2-2:2004+A1:2008 BS EN 50117-2-2:2004+A1:2008. Coaxial cables. Sectional specification for cables used in cabled distribution networks. Outdoor drop cables for systems operating at 5 MHz -
BS EN 50117-2-5:2004+A1:2008 BS EN 50117-2-5:2004+A1:2008. Coaxial cables. Sectional specification for cables used in cabled distribution networks. Outdoor drop cables for systems operating at 5 MHz -
BS EN 14744:2005 BS EN 14744:2005. Inland navigation vessels and sea-going vessels. Navigation light
BS EN 14707:2005+A1:2007 BS EN 14707:2005+A1:2007. Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insu
BS EN 14253:2003+A1:2007 BS EN 14253:2003+A1:2007. Mechanical vibration. Measurement and calculation of occupational exposure to whole-body vibration with reference to health. Practical guidance
BS F 156:2006 BS F 156:2006. Properties of fluid resistant ethylene-propylene rubber sheet, mouldings and extrusions. Specification
DD ISO/PAS 11154:2006 DD ISO/PAS 11154:2006. Road vehicles. Roof load carriers
BIP 2122:2007 BIP 2122:2007. BS 8555 Project Acorn Workbook. Volume 1 - stages 1-3
BS EN ISO 389-5:2006 BS EN ISO 389-5:2006. Acoustics. Reference zero for the calibration of audiometric equipment. Reference equivalent threshold sound pressure levels for pure tones in the frequency
BS EN 61008-1:2004 BS EN 61008-1:2004. Residual current operated circuit-breakers without integral overcurrent protection for household and similar used (RCCBs). General rules
BS EN 13808:2005 BS EN 13808:2005. Bitumen and bituminous binders. Framework for specifying cationic bituminous emulsions
BS EN 13032-2:2004 BS EN 13032-2:2004. Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. Presentation of data for indoor and outdoor work places
BS ISO 11898-3:2006 BS ISO 11898-3:2006. Road vehicles. Controller area network (CAN). Low-speed, fault-tolerant, medium-dependent interface
PD IEC/TR 62036:2007 PD IEC/TR 62036:2007. Mineral insulating oils. Oxidation stability test method based on differential scanning calorimetry (DSC)
ISO/IEC14543-3-6 : 2007 EDTN1 ISO/IEC14543-3-6 : 2007 EDTN1. ISO/IEC14543-3-6 : 2007 Information technology – Home electronic system (HES) architecture. Part 3-6: Media and media dependent layers - Tw
BS EN ISO 19901-7:2005 BS EN ISO 19901-7:2005. Petroleum and natural gas industries. Specific requirements for offshore structures. Stationkeeping systems for floating offshore structures and mobile o
BS EN 50341-2:2001 BS EN 50341-2:2001. Overhead electrical lines exceeding AC 45 kV. Index of national normative aspects
BS ISO 9096:2003 BS ISO 9096:2003. Stationary source emissions. Manual determination of mass concentration of particulate matter
BS EN 62217:2006 BS EN 62217:2006. Polymeric insulators for indoor and outdoor use with a nominal voltage greater than 1000 V. General definitions, test methods and acceptance criteria
BS EN 50341-3:2001 BS EN 50341-3:2001. Overhead electrical lines exceeding AC 45 kV. Set of national normative aspects
BS EN 60454-3-8:2006 BS EN 60454-3-8:2006. Pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Woven fabric tapes with pressure-sensitive adhesive based
BS EN 61755-1:2006 BS EN 61755-1:2006. Fibre optic connector optical interfaces. Optical interfaces for single mode non-dispersion shifted fibres. General and guidance
BS EN ISO 20567-1:2006 BS EN ISO 20567-1:2006. Paints and varnishes. Determination of stone-chip resistance of coatings. Multi-impact testing
BS EN ISO 20566:2006 BS EN ISO 20566:2006. Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory car-wash
BS EN ISO 6272-2:2006 BS EN ISO 6272-2:2006. Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling weight test, small-area indenter
BS EN ISO 15710:2006 BS EN ISO 15710:2006. Paints and varnishes. Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution
BS EN ISO 16862:2006 BS EN ISO 16862:2006. Paints and varnishes. Evaluation of sag resistance
BS EN ISO 20567-2:2006 BS EN ISO 20567-2:2006. Paints and varnishes. Determination of stone-chip resistance of coatings. Single-impact test with a guided impact body
PP 8888-2:2007 PP 8888-2:2007. Engineering drawing practice: a guide for further and higher education to BS 8888:2006, Technical product specification (TPS)
PP 8888-2:2007 (Pack of 5) PP 8888-2:2007 (Pack of 5). Engineering drawing practice. a guide for further and higher education to BS 8888:2006, Technical product specification (TPS)
ISO/TR27245 : 2007 EDTN1 ISO/TR27245 : 2007 EDTN1. ISO/TR27245 : 2007 Cranes - Tower cranes - International Standards for design, manufacture, use and maintenance requirements and recommendations
BS EN ISO 13628-8:2006 BS EN ISO 13628-8:2006. Petroleum and natural gas industries. Design and operation of subsea production systems. Remotely operated vehicle (ROV) interfaces on subsea production
BS EN 449:2002+A1:2007 BS EN 449:2002+A1:2007. Specification for dedicated liquefied petroleum gas appliances. Domestic flueless space heaters (including diffusive catalytic combustion heaters)
BS EN 13128:2001 BS EN 13128:2001. Safety of machine tools. Milling machines (including boring machines)
BS EN ISO 14688-1:2002 BS EN ISO 14688-1:2002. Geotechnical investigation and testing. Identification and classification of soil. Identification and description
BS EN 60601-1-8:2004 BS EN 60601-1-8:2004. Medical electrical equipment. General requirements for safety. Collateral standard. General requirements, tests and guidance for alarm systems in medical ele
BS EN 10220:2002 BS EN 10220:2002. Seamless and welded steel tubes. Dimensions and masses per unit length
BS EN ISO 10848-2:2006 BS EN ISO 10848-2:2006. Acoustics. Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms. Application to light elements when t
BS EN ISO 22476-2:2005 BS EN ISO 22476-2:2005. Geotechnical investigation and testing. Field testing. Dynamic probing
BS EN ISO 14689-1:2003 BS EN ISO 14689-1:2003. Geotechnical investigation and testing. Identification and classification of rock. Identification and description
BS EN ISO 14688-2:2004 BS EN ISO 14688-2:2004. Geotechnical investigation and testing. Identification and classification of soil. Principles for a classification
BS ISO 19472:2006 BS ISO 19472:2006. Machinery for forestry. Winches. Dimensions, performance and safety
BS EN 81-71:2005 BS EN 81-71:2005. Safety rules for the construction and installation of lifts. Particular applications to passenger lifts and goods passenger lifts. Vandal resistant lifts
BS EN 60464-2:2001, IEC 60464-2:2001 BS EN 60464-2:2001, IEC 60464-2:2001. Varnishes used for electrical insulation. Methods of test
BS 8417:2003 BS 8417:2003. Preservation of timber. Recommendations
BS EN 590:2004 BS EN 590:2004. Automotive fuels. Diesel. Requirements and test methods
BS EN 228:2004 BS EN 228:2004. Automotive fuels. Unleaded petrol. Requirements and test methods
BS EN 589:2004 BS EN 589:2004. Automotive fuels. LPG. Requirements and test methods
BS ISO 10813-1:2004 BS ISO 10813-1:2004. Vibration generating machines. Guidance for selection. Equipment for environmental testing
BS EN ISO 6144:2006 BS EN ISO 6144:2006. Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
BS EN ISO 6143:2006 BS EN ISO 6143:2006. Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures
BS EN 4496:2005 BS EN 4496:2005. Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminiu
BS ISO 11962:2002 BS ISO 11962:2002. Micrographics. Image mark (blip) used with 16 mm and 35 mm roll microfilm
BS EN ISO 22476-3:2005 BS EN ISO 22476-3:2005. Geotechnical investigation and testing. Field testing. Standard penetration test
BS EN 3155-005:2006 BS EN 3155-005:2006. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class T. Product standard
BS EN ISO 14637:2006 BS EN ISO 14637:2006. Milk. Determination of urea content. Enzymatic method using difference in pH (Reference method)
BS EN ISO 6142:2006 BS EN ISO 6142:2006. Gas analysis. Preparation of calibration gas mixtures. Gravimetric method
PD ISO/TR 21730:2007 PD ISO/TR 21730:2007. Health informatics. Use of mobile wireless communication and computing technology in healthcare facilities. Recommendations for electromagnetic compatibility
BS EN ISO 2884-2:2006, BS 3900-A7-2:2003 BS EN ISO 2884-2:2006, BS 3900-A7-2:2003. Paints and varnishes. Determination of viscosity using rotary viscometers. Disc or ball viscometer operated at a spec
BS EN 10305-5:2003 BS EN 10305-5:2003. Steel tubes for precision applications - Technical delivery conditions . Welded and cold sized square and rectangular tubes
BS ISO/IEC TR 18047-3:2004 BS ISO/IEC TR 18047-3:2004. Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications at 13,56 MH
BS EN 60598-2-13:2006 BS EN 60598-2-13:2006. Luminaires. Particular requirements. Ground recessed luminaires
BS EN 14063-1:2004 BS EN 14063-1:2004. Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products . Specification for the loose-fill products before install
BS EN 62329-1:2006 BS EN 62329-1:2006. Heat shrinkable moulded shapes. Definitions and general requirements
BS EN 50329:2003 BS EN 50329:2003. Railway applications. Fixed installations. Traction transformers
BS EN 50328:2003 BS EN 50328:2003. Railway applications. Fixed installations. Electronic power convertors for substations
BS EN 61377-1:2006 BS EN 61377-1:2006. Railway applications. Rolling stock. Combined testing of inverter-fed alternating current motors and their control system
BS EN 60929:2006 BS EN 60929:2006. A.C. supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
BS EN 60335-2-67:2003 BS EN 60335-2-67:2003. Household and similar electrical appliances. Safety. Particular requirements for floor treatment and floor cleaning machines, for industrial and commercial
BS EN 365:2004 BS EN 365:2004. Personal protective equipment against falls from a height. General requirements for instructions for use, maintenance, periodic examination, repair, marking and packagin
BS EN ISO 11997-1:2006 BS EN ISO 11997-1:2006. Paints and varnishes. Determination of resistance to cyclic corrosion conditions. Wet (salt fog)/dry/humidity
BS ISO 28077:2006 BS ISO 28077:2006. Photocarcinogenesis action spectrum (non-melanoma skin cancers)
BS EN ISO 6885:2007 BS EN ISO 6885:2007. Animal and vegetable fats and oils. Determination of anisidine value
BS EN ISO 17932:2007 BS EN ISO 17932:2007. Animal and vegetable fats and oils. Determination of the deterioration of bleachability index (DOBI)
BS EN ISO 18395:2007 BS EN ISO 18395:2007. Animal and vegetable fats and oils. Determination of monoacylglycerols, diacylglycerols, triacylglycerols and glycerol by high-performance size-exclusion chr
BS EN 12828:2003 BS EN 12828:2003. Heating systems in buildings. Design for water-based heating systems
BS EN 12831:2003 BS EN 12831:2003. Heating systems in buildings. Method for calculation of the design heat load
BS EN 14336:2004 BS EN 14336:2004. Heating systems in buildings. Installation and commissioning of water based heating systems
BS ISO 11222:2002 BS ISO 11222:2002. Air quality. Determination of the uncertainty of the time average of air quality measurements
BS EN ISO 19117:2006 BS EN ISO 19117:2006. Geographic information. Portrayal
BS EN ISO 19109:2006 BS EN ISO 19109:2006. Geographic information. Rules for application schema
BS EN 1337-4:2004 BS EN 1337-4:2004. Structural bearings. Roller bearings
BS EN ISO 19110:2006 BS EN ISO 19110:2006. Geographic information. Methodology for feature cataloguing
BS ISO 5599-1:2001 BS ISO 5599-1:2001. Pneumatic fluid power. Five-port directional control valves. Mounting interface surfaces without electrical connector
BS EN 13799:2002 BS EN 13799:2002. Contents gauges for LPG tanks
BS EN 60335-2-9:2003+A2:2006 BS EN 60335-2-9:2003+A2:2006. Household and similar electrical appliances. Safety. Particular requirements for grills, toasters and similar portable cooking appliances
BS 7888-4.1:2006+A1:2008, HD 629.1 S2:2006+A1:2008 BS 7888-4.1:2006+A1:2008, HD 629.1 S2:2006+A1:2008. Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up t
BS EN 14647:2005 BS EN 14647:2005. Calcium aluminate cement. Composition, specifications and conformity criteria
BS 7888-4.2:2006+A1:2008, HD 629.2 S2:2006+A1:2008 BS 7888-4.2:2006+A1:2008, HD 629.2 S2:2006+A1:2008. Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up t
BS EN 62132-1:2006 BS EN 62132-1:2006. Integrated circuits. Measurement of electromagnetic immunity, 150 kHz to 1 GHz. General conditions and definitions
BS EN 1825-1:2004 BS EN 1825-1:2004. Grease separators. Principles of design, performance and testing, marking and quality control
BS EN 61558-1:2005 BS EN 61558-1:2005. Safety of power transformers, power supplies, reactors and similar products. General requirements and tests
DD CEN ISO/TS 17764-1:2006 DD CEN ISO/TS 17764-1:2006. Animal feeding stuffs. Determination of the content of fatty acids. Preparation of methyl esters
BS ISO 3019-2:2001 BS ISO 3019-2:2001. Hydraulic fluid power. Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors. Metric series
BS ISO 5599-2:2001 BS ISO 5599-2:2001. Pneumatic fluid power. Five-port directional control valves. Mounting interface surfaces with optional electrical connector
BS EN 62271-100:2001 BS EN 62271-100:2001. High-voltage switchgear and controlgear. High-voltage alternating-current circuit-breakers
BS EN 12516-1:2005 BS EN 12516-1:2005. Industrial valves. Shell design strength. Tabulation method for steel valve shells
BS EN 60598-2-12:2006 BS EN 60598-2-12:2006. Luminaires. Particular requirements. Mains socket-outlet mounted nightlights
CWA 15660:2007 CWA 15660:2007. Providing good practice for e-learning quality approaches
CWA 15661:2007 CWA 15661:2007. Providing e-learning supplies transparency profiles
BS EN 60335-2-75:2004 BS EN 60335-2-75:2004. Household and similar electrical appliances. Safety. Particular requirements for commercial dispensing appliances and vending machines
BS EN 14132:2003 BS EN 14132:2003. Foodstuffs. Determination of ochratoxin A in barley and roasted coffee. HPLC method with immunoaffinity column clean-up
BS 5268-3:2006 BS 5268-3:2006. Structural use of timber. Code of practice for trussed rafter roofs
BS EN 14354:2004 BS EN 14354:2004. Wood-based panels. Wood veneer floor covering
BS EN 61241-1:2004 BS EN 61241-1:2004. Electrical apparatus for use in the presence of combustible dust. Protection by enclosures "tD"
BS EN 14133:2003 BS EN 14133:2003. Foodstuffs. Determination of ochratoxin A in wine and beer. HPLC method with clean-up on a immunoaffinity column clean-up
ERROR ERROR. Strength and stability of furniture. Requirements for strength, durability and stability of tables and trolleys for domestic and contract use
BS ISO 24431:2006 BS ISO 24431:2006. Gas cylinders. Cylinders for compressed and liquefied gases (excluding acetylene). Inspection at the time of filling
BS EN 60512-12-3:2006 BS EN 60512-12-3:2006. Connectors for electronic equipment. Tests and measurements. Soldering tests. Solderability, de-wetting
BS EN 13773:2003 BS EN 13773:2003. Textiles and textile products. Burning behaviour. Curtains and drapes. Classification scheme
BS EN 50110-1:2004 BS EN 50110-1:2004. Operation of electrical installations
BS EN ISO 18274:2004 BS EN ISO 18274:2004. Welding consumables. Wire and strip electrodes, wires and rods for fusion welding of nickel and nickel alloys. Classification
DD CEN/TS 15357:2006 DD CEN/TS 15357:2006. Solid recovered fuels. Terminology, definitions and descriptions
DD CEN/TS 15358:2006 DD CEN/TS 15358:2006. Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels
DD CEN/TS 15439:2006 DD CEN/TS 15439:2006. Biomass gasification. Tar and particles in product gases. Sampling and analysis
BS EN 14219:2003 BS EN 14219:2003. Hexagon bolts with flange with metric fine pitch thread. Small series
BS EN 10210-2:2006 BS EN 10210-2:2006. Hot finished structural hollow sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties
BS EN 10297-2:2005 BS EN 10297-2:2005. Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions. Stainless steel
BS EN 12697-10:2001 BS EN 12697-10:2001. Bituminous mixtures. Test methods for hot mix asphalt. Compactibility
BS EN 12697-11:2005 BS EN 12697-11:2005. Bituminous mixtures. Test methods for hot mix asphalt. Determination of the affinity between aggregate and bitumen
BS EN 12697-21:2003 BS EN 12697-21:2003. Bituminous mixtures. Test methods for hot mix asphalt. Indentation using plate specimens
BS EN ISO 23631:2006 BS EN ISO 23631:2006. Water quality. Determination of dalapon, trichloroacetic acid and selected haloacetic acids. Method using gas chromatography (GC-ECD and/or GCMS detection) a
BS EN 60115-1:2001+A1:2001 BS EN 60115-1:2001+A1:2001. Fixed resistors for use in electronic equipment. Generic specification
BS EN 12766-3:2004, BS 2000-462.3:2004 BS EN 12766-3:2004, BS 2000-462.3:2004. Petroleum products and used oils. Determination of PCBs and related products. Determination and quantification of polychl
BS EN 13160-5:2004 BS EN 13160-5:2004. Leak detection systems. Tank gauge leak detection systems
BS EN 14836:2005 BS EN 14836:2005. Synthetic surfaces for outdoor sports areas. Exposure to artificial weathering
BS EN ISO 15798:2001 BS EN ISO 15798:2001. Ophthalmic implants. Ophthalmic viscosurgical devices
PD ISO/TR 24098:2007 PD ISO/TR 24098:2007. Intelligent transport systems. System architecture, taxonomy and terminology. Procedures for developing ITS deployment plans utilizing ITS system architectur
BS EN 14387:2004+A1:2008 BS EN 14387:2004+A1:2008. Respiratory protective devices. Gas filter(s) and combined filter(s). Requirements, testing, marking
BS EN 415-7:2006+A1:2008 BS EN 415-7:2006+A1:2008. Safety of packaging machines. Group and secondary packaging machines
PD CISPR/TR 16-4-3:2004 PD CISPR/TR 16-4-3:2004. Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Statistical considerat
BS EN 13201-3:2003 BS EN 13201-3:2003. Road lighting. Calculation of performance
PD CEN/TR 15226:2006 PD CEN/TR 15226:2006. Building products. Treatment of acoustics in product technical specifications
BS 4482:2005 BS 4482:2005. Steel wire for the reinforcement of concrete products. Specification
BS 4483:2005 BS 4483:2005. Steel fabric for the reinforcement of concrete. Specification
CWA 15666:2007 CWA 15666:2007. Business requirements specification. Cross industry e-tendering process
CWA 15667:2007 CWA 15667:2007. Business requirements specification. Cross industry catalogue process
CWA 15668:2007 CWA 15668:2007. Business requirements specification. Cross industry invoicing process
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
