BIS Standards Catalogue
DC95/214251 DC95/214251. IEC 875-1-1 (First Edition). Fibre optic branching devices. Blank detail specification. (86B/578/CDV)
DC95/542692 DC95/542692. Optics and optical instruments. Environmental test methods. Part 3. Mechanical stress (CD 9022-3)
BS EN ISO 7622-2:1996 BS EN ISO 7622-2:1996. Steel cord conveyor belts. Longitudinal traction test. Measurement of tensile strength
BS EN ISO 7622-1:1996 BS EN ISO 7622-1:1996. Steel cord conveyor belts. Longitudinal traction test. Measurement of elongation
BS ISO 11168:1995 BS ISO 11168:1995. Socket wrenches for spark and glow plugs
BS ISO 2936:1995 BS ISO 2936:1995. Assembly tools for screws and nuts. Hexagon socket screw keys
BS EN ISO 1660:1996, BS 308-2.3:1995 BS EN ISO 1660:1996, BS 308-2.3:1995. Technical drawings. Dimensioning and tolerancing of profiles
BS ISO 1007:1995 BS ISO 1007:1995. Photography. 135-size film and magazine. Specifications
BS EN ISP 11185-11:1996 BS EN ISP 11185-11:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT232.
DC95/542755 DC95/542755. ISO/CD 1203. Photography. Roll film cameras. Back window location (Revision of ISO 1203:1984)
DC95/542758 DC95/542758. ISO/CD 1754 Photography. 35mm film and roll film cameras. Picture sizes (Revision of ISO 1754:1986)
DC95/563034 DC95/563034. BS 5724. Medical electrical equipment. Part 2. Particular requirements for safety. Section 2.4. Specification for cardiac defibrillators and cardiac defibrillator-monitors (IE
BS EN 60626-2:1996, IEC 60626-2:1995 BS EN 60626-2:1996, IEC 60626-2:1995. Combined flexible materials for electrical insulation. Methods of test
BS EN 61286:1996, IEC 61286:1995 BS EN 61286:1996, IEC 61286:1995. Information technology. Coded graphic character set for use in the preparation of documents used in electrotechnology and for informa
BS EN 60835-3-11:1996, BS 7573-3.11:1996,IEC 60835-3-11:1995 BS EN 60835-3-11:1996, BS 7573-3.11:1996,IEC 60835-3-11:1995. Methods of measurement for equipment used in digital microwave radio transmis
BS EN 61327:1996, IEC 61327:1995 BS EN 61327:1996, IEC 61327:1995. Helical-scan digital composite video cassette recording system using 12,65 mm (0,5 in) magnetic tape. Format D-3
BS EN 116501:1996 BS EN 116501:1996. Harmonized system of quality assessment for electronic components. Blank detail specification. Electromechanical all-or-nothing TELECOM relays of assessed quality
BS EN 116303:1996 BS EN 116303:1996. Harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical all-or-nothing heavy load relays of assessed quali
BS EN 116503:1996 BS EN 116503:1996. Harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical all-or-nothing TELECOM relays of assessed quality,
BS EN ISO 105-D02:1996 BS EN ISO 105-D02:1996. Textiles. Tests for colour fastness. Colour fastness to rubbing: Organic solvents
BS EN ISO 105-P02:1996 BS EN ISO 105-P02:1996. Textiles. Tests for colour fastness. Colour fastness to pleating. Steam pleating
BS EN 188200:1996 BS EN 188200:1996. Harmonized system of quality assessment for electronic components. Sectional specification. Optical fibres A1 category graded index multimode
BS EN 188201:1996 BS EN 188201:1996. Harmonized system of quality assessment for electronic components. Family specification: A1a graded index multimode optical fibres
BS EN 188202:1996 BS EN 188202:1996. Harmonized system of quality assessment for electronic components. Family specification: A1b graded index multimode optical fibres
BS EN 186240:1996 BS EN 186240:1996. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type MT
BS EN ISO 105-B05:1996 BS EN ISO 105-B05:1996. Textiles. Tests for colour fastness. Detection and assessment of photochromism
BS EN ISO 105-X10:1996 BS EN ISO 105-X10:1996. Textiles. Tests for colour fastness. Assessment of migration of textile colours into polyvinyl chloride coatings
BS EN ISO 105-X01:1996 BS EN ISO 105-X01:1996. Textiles. Tests for colour fastness. Colour fastness to carbonizing: Aluminium chloride
BS EN ISO 105-S03:1996 BS EN ISO 105-S03:1996. Textiles. Tests for colour fastness. Colour fastness to vulcanization. Open steam
BS EN ISO 105-G01:1996 BS EN ISO 105-G01:1996. Textiles. Tests for colour fastness. Colour fastness to nitrogen oxides
BS EN ISO 105-X09:1996 BS EN ISO 105-X09:1996. Textiles. Tests for colour fastness. Colour fastness to formaldehyde
BS EN ISO 105-S02:1996 BS EN ISO 105-S02:1996. Textiles. Tests for colour fastness. Colour fastness to vulcanization: Sulfur monochloride
BS EN ISO 105-Z02:1996 BS EN ISO 105-Z02:1996. Textiles. Tests for colour fastness. Colour fastness to metals in the dye-bath. Iron and copper
BS EN ISO 105-Z01:1996 BS EN ISO 105-Z01:1996. Textiles. Tests for colour fastness. Colour fastness to metals in the dye-bath: chromium salts
BS EN ISO 105-X02:1996 BS EN ISO 105-X02:1996. Textiles. Tests for colour fastness. Colour fastness to carbonizing: Sulfuric acid
BS EN ISO 105-S01:1996 BS EN ISO 105-S01:1996. Textiles. Tests for colour fastness. Colour fastness to vulcanization. Hot air
DC95/125928 DC95/125928. BS EN 61010-2-043. Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-043. Particular requirements for dry heat sterilizers using
DC95/126123 DC95/126123. Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply. Specifications. Part 4. Valves and ancillary equipment (ISO/DIS 4422-4)
BS CECC 00108:1996 BS CECC 00108:1996. Rule of Procedure 8. Attestation of conformity. The CECC Mark and conditions of use, certificates of approval and procedures for the attestation of conformity
BS EN ISO 9856:1996, BS 490-10.8:1996 BS EN ISO 9856:1996, BS 490-10.8:1996. Conveyor belts. Determination of elastic modulus
BS EN ISP 11185-9:1996 BS EN ISP 11185-9:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT222. Pa
BS 6312-2.1:1994 BS 6312-2.1:1994. Connectors for analogue telecommunication interfaces. Sockets for use with plugs specified in BS 6312:Part 1. Specification for sockets. General requirements
BS 6312-1:1994 BS 6312-1:1994. Connectors for analogue telecommunication interfaces. Specification for plugs
BS EN ISP 11185-3:1996 BS EN ISP 11185-3:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT215, FV
BS EN ISP 11185-4:1996 BS EN ISP 11185-4:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT217. Ho
BS EN ISP 11185-5:1996 BS EN ISP 11185-5:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT218. Lo
BS EN ISP 11185-6:1996 BS EN ISP 11185-6:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT219. St
BS EN ISP 11185-7:1996 BS EN ISP 11185-7:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT2110. E
BS EN ISP 11185-8:1996 BS EN ISP 11185-8:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT221. Fo
BS ISO 8225:1995 BS ISO 8225:1995. Photography. Ammonia-processed diazo photographic film. Specifications for stability
BS ISO 9718:1995 BS ISO 9718:1995. Photography. Processed vesicular photographic film. Specifications for stability
BS EN 10212:1996 BS EN 10212:1996. Chemical analysis of ferrous materials. Determination of arsenic in steel and iron. Spectrophotometric method
DC95/126161 DC95/126161. prEN 12202-5. Plastics piping systems for hot and cold water. Polypropylene (PP). Part 5. Fitness for purpose of the system. Part 5 : Fitness for purpose of the system
DC95/126160 DC95/126160. prEN 12202-3. Plastics piping systems for hot and cold water. Polypropylene (PP). Part 3. Fittings. Part 3 : Fittings
DC95/126159 DC95/126159. prEN 12202-2. Plastics piping systems for hot and cold water. Polypropylene (PP). Part 2. Pipes. Part 2 : Pipes
DC95/126158 DC95/126158. prEN 12202-1. Plastics piping systems for hot and cold water. Polypropylene (PP). Part 1. General. Part 1 : General
DC95/108644 DC95/108644. Amendment No. 1 to BS 598:Part101:1987. Sampling and examination of bituminous mixtures for roads and other paved areas. Part 101. Methods for preparatory treatment of samples
DC95/108646 DC95/108646. Amendment No. 1 to BS 598:Part 108:1990. Sampling and examination of bituminous mixtures for roads and other paved areas. Part 108. Methods for determination of the condition
DC95/108647 DC95/108647. Amendment No. 1 to BS 598:Part 109:1990. Sampling and examination of bituminous mixtures for roads and other paved areas. Part 109. Methods of the assessment of the compaction
PD 6592:1996, CR 1460:1994 PD 6592:1996, CR 1460:1994. Packaging. Energy recovery from used packaging
BS EN ISO 6551:1996 BS EN ISO 6551:1996. Petroleum liquids and gases. Fidelity and security of dynamic measurement. Cabled transmission of electric and/or electronic pulsed data
DC95/522016 DC95/522016. BS 7755. Soil quality. Part 2. Sampling. New section. Guidance on the procedure for investigation of natural, near natural and cultivated sites [ISO/DIS 10381-4]. Part 4: Guid
DC95/126162 DC95/126162. Agglomerated cork disks. Test methods (ISO/DIS 8507)
DC95/126036 DC95/126036. prEN 12240. Touch and close fasteners. Determination of the overall effective width of tapes and the effective closure width
BS EN ISO 3735:1996 BS EN ISO 3735:1996. Crude petroleum and fuel oils. Determination of sediment. Extraction method
BS EN ISO 7278-1:1996 BS EN ISO 7278-1:1996. Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters. General principles
BS EN ISO 4267-2:1996 BS EN ISO 4267-2:1996. Petroleum and liquid petroleum products. Calculation of oil quantities. Dynamic measurements
BS EN ISO 3838:1996, BS 2000-189/190:1998 BS EN ISO 3838:1996, BS 2000-189/190:1998. Methods for determination of density or relative density of petroleum and petroleum products (pyknometer methods)
DC95/522017 DC95/522017. BS 7755. Soil quality. Part 5. Physical methods. New section. Determination of aggregate strength. Tensile strength measurement (crushing test) [ISO/DIS 11273-1]. Part 1: Meas
DC95/715582 DC95/715582. Space data and information transfer systems. ASCII encoded English (ISO/DIS 14962)
DC95/214874 DC95/214874. Electromagnetic compatibility (EMC). Part 3. Limits. Section 3. Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current ≤
BS ISO 3773:1983 BS ISO 3773:1983. Cinematography. Tape splices for 8 mm Type S motion-picture film for projector use. Dimensions
BS ISO 2967:1982 BS ISO 2967:1982. Cinematography. Magnetic stripes for sound records on 35 mm motion-picture film perforated 8 mm Type S-5R (1-3-5-7-0). Positions and width dimensions
BS ISO 3639:1981 BS ISO 3639:1981. Cinematography. Projection reels/spools 75 to 312 mm diameter for 8 mm Type S motion-picture film. Dimensions and specifications
BS ISO 6077:1993 BS ISO 6077:1993. Photography. Photographic films and papers. Wedge test for brittleness
BS ISO 3027:1984 BS ISO 3027:1984. Cinematography. Magnetic stripes and recording head gaps for sound record on 8 mm Type S motion-picture films. Position and width dimensions
BS ISO 3068:1982 BS ISO 3068:1982. Cinematography. Magnetic stripes for sound records on 16 mm motion-picture film perforated 8 mm Type S-2R (1-4) and (1-3). Positions and width dimensions
BS EN 61221:1996, IEC 61221:1993 BS EN 61221:1996, IEC 61221:1993. Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications
BS ISO 3022:1988 BS ISO 3022:1988. Cinematography. 35 mm motion-picture film perforated 16 mm (1-3-0). Cutting and perforating dimensions
BS ISO 3645:1984 BS ISO 3645:1984. Cinematography. Image area produced by 8 mm Type S motion-picture camera aperture and maximum projectable image area. Positions and dimensions
BS ISO 3774:1988 BS ISO 3774:1988. Cinematography. 35 mm motion-picture film perforated 8 mm Type S (1-3-5-7-0) and (1-0). Cutting and perforating dimensions
BS ISO 9334:1995 BS ISO 9334:1995. Optics and optical instruments. Optical transfer function. Definitions and mathematical relationships
BS ISO 5-3:1995 BS ISO 5-3:1995. Photography. Density measurements. Spectral conditions
BS EN 926-1:1996 BS EN 926-1:1996. Paragliding equipment. Paragliders. Requirements and test methods for structural strength
DC95/542825 DC95/542825. Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam parameters. Beam positional stability (ISO/DIS 11670)
DC95/563134 DC95/563134. BS EN 12182. Technical aids for disabled persons. General requirements and test methods (prEN 12182)
DC95/716339 DC95/716339. Aerospace series. Aerospace. Inserts, self-locking, MJ threads, closed type, with or without helical coil insert, aluminium alloy, coated or uncoated. Dimensions (ISO/CD 13596
DC95/716338 DC95/716338. Aerospace series. Aerospace. Inserts, self-locking, MJ threads, reduced flanges, closed type, aluminium alloy, coated or uncoated. Dimensions (ISO/CD 13598)
DC95/716337 DC95/716337. Aerospace series. Aerospace. Inserts, clearance hole, aluminium alloy, coated or uncoated. Dimensions (ISO/CD 13599)
DC95/542828 DC95/542828. Photography. Slide trays for projectors. Part 2. Straight slide tray, closed type (Japanese design) (ISO/DIS 11106-2)
DC95/542829 DC95/542829. Photography. Slide trays for projectors. Part 1. Straight slide tray, open type (European design) (ISO/DIS 11106-1)
BS 5202-16:1996, ISO 8454:1995 BS 5202-16:1996, ISO 8454:1995. Methods for chemical analysis of tobacco and tobacco products. Determination of carbon monoxide in the vapour phase of cigarette smoke (N
DC95/542822 DC95/542822. Packaging. Sacks made from thermoplastic flexible film. Method for the determination of the peel resistance of glued seams in the bottom of pasted sacks (CD 15120)
DC95/716321 DC95/716321. Aerospace series. Nuts, hexagon, self-locking by domed plastic cap, normal height, normal across flats, in corrosion resisting steel, passivated. Classification. 900 MPa (at a
DC95/716322 DC95/716322. Aerospace series. Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in corrosion resisting steel, passivated. Classification. 900 MPa (at ambien
DC95/715944 DC95/715944. prEN 12214. Cryogenic vessels. Requirement for miscellaneous equipment and accessories
BS ISO 4241:1987 BS ISO 4241:1987. Cinematography. Leaders and run-out trailers for 35 mm and 16 mm release prints. Specifications
BS ISO 3026:1992 BS ISO 3026:1992. Cinematography. Printed 8 mm Type S image area on 35 mm motion-picture film perforated 8 mm Type S, 2R-4.227 (1664) or 5R-4.234 (1667). Position and dimensions
BS ISO 3775:1990 BS ISO 3775:1990. Cinematography. Printed 8 mm Type S image area on 16 mm motion-picture film perforated 8 mm Type S (1-3). Position and dimensions
DC95/126195 DC95/126195. BS ISO 4798. Laboratory glassware. Filter funnels (ISO/DIS 4798)
DC95/126197 DC95/126197. BS ISO 4142. Laboratory glassware. Test tubes and culture tubes (ISO/DIS 4142)
DC95/215476 DC95/215476. Flow of cold potable water in closed conduits. Part 4. Specification for combination meters ( ISO/CD 7858-1)
BS 7087-6:1996 BS 7087-6:1996. Herbs and spices ready for food use. Specification for coriander seeds (whole and ground)
BS 7087-5:1996 BS 7087-5:1996. Herbs and spices ready for food use. Specification for dried cumin (whole and ground)
BS 7087-4:1996 BS 7087-4:1996. Herbs and spices ready for food use. Specification for cloves (whole and ground)
BS 7087-3:1996 BS 7087-3:1996. Herbs and spices ready for food use. Specification for dried sage (whole and ground)
BS 7087-7:1996 BS 7087-7:1996. Herbs and spices ready for food use. Specification for dried fenugreek (whole or ground)
BS 7087-8:1996 BS 7087-8:1996. Herbs and spices ready for food use. Specification for dried ginger (whole and ground)
BS 7087-9:1996 BS 7087-9:1996. Herbs and spices ready for food use. Specification for dried marjoram (whole, rubbed and ground)
BS 7087-10:1996 BS 7087-10:1996. Herbs and spices ready for food use. Specification for dried mint (whole, rubbed and ground)
BS 7087-11:1996 BS 7087-11:1996. Herbs and spices ready for food use. Specification for ground paprika
BS 8103-3:1996 BS 8103-3:1996. Structural design of low-rise buildings. Code of practice for timber floors and roofs for housing
DC95/542910 DC95/542910. Photography. Electronic still picture cameras. Removable memory (ISO/CD 12234)
DC95/126215 DC95/126215. BS ISO 12772. Laboratory glassware. Disposable microhaematocrit capillaries (ISO/DIS 12772)
DC95/126214 DC95/126214. BS ISO 12771. Plastics laboratory ware. Disposable serological pipettes (ISO/DIS 12771)
DC95/716284 DC95/716284. EN 304:prA1. Amendment 1. Heating boilers. Test code for heating boilers for atomizing oil burners
DC95/716286 DC95/716286. prEN 12244-2. Specification for domestic direct gas-fired washing machines of heat input not exceeding 20 kW. Part 2. Rational use of energy
DC95/716285 DC95/716285. prEN 12244-1. Specification for domestic direct gas-fired washing machines of heat input not exceeding 20 kW. Part 1. Safety
DC95/716243 DC95/716243. prEN 12239:1995. Ventilation for buildings. Air terminal devices. Aerodynamic testing and rating for displacement flow applications
BS EN 422:1996 BS EN 422:1996. Rubber and plastics. Machines. Safety. Blow moulding machines intended for the production of hollow articles. Requirements for the design and construction
BS ISO TR 12776:1995 BS ISO TR 12776:1995. Pallets. Slip sheets
BS ISO TR 11444:1995 BS ISO TR 11444:1995. Quality of sawn wood used for the construction of pallets
BS ISO 3271:1995 BS ISO 3271:1995. Iron ores. Determination of tumble strength
BS ISO 4695:1995 BS ISO 4695:1995. Iron ores. Determination of reducibility
BS ISO 7215:1995 BS ISO 7215:1995. Iron ores. Determination of relative reducibility
DC95/126342 DC95/126342. BS ISO 1773. Laboratory glassware. Narrow necked boiling flasks (ISO/DIS 1773)
DC95/715822 DC95/715822. Connections for hydraulic fluid power and general use. Hose fittings. Part 2. Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO/DIS 12151-
DC95/108483 DC95/108483. Code of practice for site investigations
BS EN ISO 9251:1996, ISO 9251:1987 BS EN ISO 9251:1996, ISO 9251:1987. Thermal insulation. Heat transfer. Conditions and properties of materials. Vocabulary
DC95/109290 DC95/109290. prEN 12247. Determination of the quality of timber in pallets
BS ISO 2328:1993 BS ISO 2328:1993. Fork lift trucks. Hook-on type fork arms and fork arm carriages. Mounting dimensions
BS EN ISO 2160:1995, BS 2000:Part 154:1995,ISO 2160:1985 BS EN ISO 2160:1995, BS 2000:Part 154:1995,ISO 2160:1985. Petroleum products. Corrosiveness to copper. Copper strip test
DC95/109293 DC95/109293. prEN 326-2. Wood-based panels. Sampling, cutting and inspection. Part 2. Quality control in the factory. Part 2 : Quality control in the factory
DC95/109294 DC95/109294. prEN 326-3. Wood-based panels. Sampling, cutting and inspection. Part 3. Inspection of a consignment of panels
DC95/109444 DC95/109444. prEN 12255-2. Wastewater treatment plants (over 51 PE). Part 2. Performance requirements of raw wastewater pumping installations
DC95/126613 DC95/126613. ISO/DIS 4422-5. Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply. Specifications. Part 5. Fitness for purpose of the system
DC95/126616 DC95/126616. ISO/CD 4605. Reinforced products. Woven fabrics. Determination of mass per unit area
DC95/717316 DC95/717316. Welding and allied processes. Welding, brazing and soldering processes. Vocabulary
DC95/126497 DC95/126497. Rubber-covered rollers. Determination of apparent hardness. Part 1. IRHD method (ISO 7267-1)
BS ISO/IEC 8613-10:1995 BS ISO/IEC 8613-10:1995. Information processing. Text and office systems. Office document architecture (ODA) and interchange format. Formal specifications
BS ISO/IEC 8613-11:1995 BS ISO/IEC 8613-11:1995. Information processing. Text and office systems. Office document architecture (ODA) and interchange format. Tabular structures and tabular layout
BS ISO 11907-2:1995 BS ISO 11907-2:1995. Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Static method
BS ISO 11195:1995 BS ISO 11195:1995. Gas mixers for medical use. Stand-alone gas mixers
BS ISO 9335:1995 BS ISO 9335:1995. Optics and optical instruments. Optical transfer function. Principles and procedures of measurement
DC95/402952 DC95/402952. Design specification for the structure and content for the revision of ISO 9000-1:1994
DC95/402953 DC95/402953. Design specification for the structure and content for the revision of ISO 9001:1994, ISO 9002:1994, ISO 9003:1994
DC95/402954 DC95/402954. Design specification for the structure and content for the revision of ISO 9004-1:1994
DC95/402955 DC95/402955. Design specification for the structure and content of a standard on quality management principles and guidelines on their application (ISO 9004-8)
DC95/522201 DC95/522201. BS ISO 3382:199X. Acoustics. Measurement of the reverberation time of rooms with reference to other acoustical parameters (ISO 3382:1975) (ISO/DIS 3382)
WD/HB10103 : 1995 WD/HB10103 : 1995. Business Systems Engineering
WD/HB10102 : 1995 WD/HB10102 : 1995. Beyond Business Process Reengineering
WD/HB10101 WD/HB10101. Process Management to Quality Improvement
WD/HB10100 : 1995 (TQM glossary) WD/HB10100 : 1995 (TQM glossary). TQM Glossary
DD ENV 1014-3:1996 DD ENV 1014-3:1996. Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Determination of the benzo(a)pyrene content of creosote
BS ISO 10005:1995 BS ISO 10005:1995. Quality management. Guidelines for quality plans
BS 6465-2:1996 BS 6465-2:1996. Sanitary installations. Code of practice for space requirements for sanitary appliances
BS 4515:1996 BS 4515:1996. Specification for welding of steel pipelines on land and offshore
DC95/126635 DC95/126635. Rubber. Tolerances for products. Part 2. Geometrical tolerances (ISO/DIS 3302-2)
DC95/126553 DC95/126553. Natural gas. Preparation of calibration gas mixtures. Gravimetric methods (ISO/DIS 13275)
BS EN ISO 3830:1996, BS 2000-270:1996 BS EN ISO 3830:1996, BS 2000-270:1996. Petroleum products. Determination of lead content of gasoline. Iodine monochloride method
BS EN ISO 4259:1996, BS 2000-367:1996 BS EN ISO 4259:1996, BS 2000-367:1996. Petroleum products. Determination and application of precision data in relation to methods of test
BS EN ISO 6245:1996, BS 2000-4:1996 BS EN ISO 6245:1996, BS 2000-4:1996. Petroleum products. Determination of ash
BS EN ISO 10370:1996, BS 2000-398:1996 BS EN ISO 10370:1996, BS 2000-398:1996. Petroleum products. Determination of carbon residue. Micro method
DC95/126395 DC95/126395. BS 3900. Part J11. Methods of test for paints. Group J. Testing of coating powders. Part J11. Inclined-plane flow test (ISO 8130-11)
DC95/216460 DC95/216460. Test methods for accessories for power cables with rated voltage from 3.6/6 kV (Um = 7.2 kV) up to and including 20.8/36 kV (Um = 42 kV) (prHD 628 S1)
DC95/522196 DC95/522196. BS EN ISO 3822-3:199X. Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Part 3. Mounting and operating condition
DC95/522197 DC95/522197. BS EN ISO 3822-4:199X. Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Part 4. Mounting and operating condition
DC95/542183 DC95/542183. BS guide to smoke measurement units. Their basis and use in smoke opacity test methods
DC95/717169 DC95/717169. Road vehicles. Sound signalling devices. Tests after mounting of vehicles (ISO 6969:1981)
DC95/563426 DC95/563426. Medical electrical equipment. Dosimeters with ionization chambers and/or semiconductor connectors as used in X-ray diagnostic imaging (IEC 1674 - 62C/147/CDV)
DC95/126842 DC95/126842. Plastics. Liquid epoxy resins. Determination of tendency to crystallize
DC95/563429 DC95/563429. Ophthalmic optics. Spectacle lenses. Fundamental requirements for uncut finished spectacle lenses (ISO/DIS 14889)(prEN ISO 14889)
DC95/563411 DC95/563411. Ophthalmic instruments. Fundus cameras (ISO/DIS 10940)(prEN ISO 10940)
DC95/563410 DC95/563410. Contact lenses and contact lens care products. Test methods for the determination of shelf-life and in-use stability (ISO/DIS 13212)(prEN ISO 13212)
DC95/503181 DC95/503181. BS 5381. Methods for determination of physical properties of tobacco and tobacco products. Determination of loss of tobacco from the ends. Method using a rotating cylindrical
DC95/503182 DC95/503182. BS 5381. Methods for determination of physical properties of tobacco and tobacco products. Determination of loss of tobacco from the ends. Method using a rotating cubic box (s
DC96/200639 DC96/200639. Recommended methods of measurement on receivers for television broadcast transmissions. Part 8. Measurements on D2-MAC/Packet equipment. (IEC/100A/1/CDV)
DC96/120339 DC96/120339. Graphic technology. Assessment of penetrability, detachment and resistance of printed labels to hot alkali solutions (ISO/DIS 12632)
DC96/540012 DC96/540012. Packaging. Tactile warnings of danger. Requirements. prEN 272
DC95/216454 DC95/216454. IEC standard. Methods for measuring the performance of electric portable appliances for cooking, grilling and similar functions. Document 59G/60/CD
DC96/520030 DC96/520030. Water quality. Part 6 sampling. New section. Guidance on sampling of sewage, waterworks and related sludges (ISO/DIS 5667-13)
DC95/125721 DC95/125721. Classification scheme for geotextiles
DISC PD 0008:1996 DISC PD 0008:1996. Code of practice for legal admissibility of information stored on electronic document management systems
BS EN ISO 7345:1996 BS EN ISO 7345:1996. Thermal insulation. Physical quantities and definitions
DC96/500080 DC96/500080. BS 4289. Methods for analysis of oilseeds. Part 10. Determination of chlorophyll content of rapeseed (ISO/DIS 10519)
Licensees - Concise (Diskette) Licensees - Concise (Diskette). BSI Register of Licensees - Concise (Diskette)
DC96/120557 DC96/120557. Amendment to BS 3502:Part 3. Rubber compounding ingredients. Abbreviations. DAM 1 New material (ISO/DIS 6472/DAM 1)
DC96/700802 DC96/700802. Amendment 1 to ISO 7967-2:1987. Reciprocating international combustion engines. Vocabulary of components and systems. Part 2. Main running gear (ISO 7967-2:1987/DAM1). Main ru
DC96/402010 DC96/402010. Design management systems. Part 2. Guide to managing the design of manufactured products
DC96/120211 DC96/120211. BS 3900. Part F16. Methods of test for paints. Determination of resistance to artificial weathering by exposure to fluorescent UV and condensation (ISO/DIS 11507)
DC96/640185 DC96/640185. ISO/IEC DIS 11770-1. Information technology. Security techniques. Key management. Part 1. Framework
DC96/700312 DC96/700312. Industrial valves. Technical conditions of delivery. Part 3. Test procedures and acceptance criteria. prEN 12266-3
DC95/210015 DC95/210015. IEC 79-17 Inspection and maintenance of electrical installations in hazardous areas (other than mines) (IEC Document 31J/41/CDV)
DC96/120514 DC96/120514. ISO/DIS 12176-1. Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Part 1. Butt fusion
EP 010 EP 010. BSI Electronic Book. Demonstration disk
WD/DC96/100358 WD/DC96/100358. prEN 12274-3. Slurry surfacing. Test method. Part 3. Consistency. Part 3 : Consistency
DC96/200641 DC96/200641. Cabled distribution systems for television and sound signals. Part 1. System requirements. Section 9. Safety (IEC/100D/1/CDV)
DC96/200642 DC96/200642. Cabled distribution systems for television and sound signals. Part 3. Active coaxial wideband distribution equipment (IEC/100D/2/CDV)
DC96/200643 DC96/200643. Cabled distribution systems for television and sound signals. Part 4. Passive coaxial wideband distribution equipment (IEC/100D/3/CDV)
DC96/570008 DC96/570008. Mountaineering equipment. Chocks safety requirements and test methods (prEN 12270)
BS AU 266-1:1996, ISO 11154-1:1995 BS AU 266-1:1996, ISO 11154-1:1995. Specification for roof load carriers. Roof bars
BS ISO/IEC 15802-1:1995 BS ISO/IEC 15802-1:1995. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks - common specifications. Medi
BS ISO/IEC 13868:1995 BS ISO/IEC 13868:1995. Information technology. Telecommunications and information exchange between systems. Private Integrated Services Network. Inter-exchange signalling protoco
BS ISO/IEC 13863:1995 BS ISO/IEC 13863:1995. Information technology. Telecommunications and information exchange between systems. Private Integrated Services Network. Specification, functional model a
BS EN 60751:1996, IEC 60751:1983 BS EN 60751:1996, IEC 60751:1983. Industrial platinum resistance thermometer sensors
DC96/700391 DC96/700391. Trucks with 24 V systems. 7 pole connectors between towing vehicles and trailers. Type 24 S (Supplementary)
DC96/7000392 DC96/7000392. Passenger cars and light commercial vehicles with 12 V systems. 7 pole connectors between towing vehicles and trailers. Type 12 (normal)
DC96/700393 DC96/700393. Passenger cars and light commercial vehicles 12 V systems. 7-pole connectors between towing vehicles and trailers. Type 12 S (supplementary)
DC96/700394 DC96/700394. Trucks with 24 V systems. 7-pole connectors between towing vehicles and trailers. Type 24 N (normal)
DC96/701118 DC96/701118. Magnetic materials. Part 8. Specification for individual materials. Section 2. Specification for cold rolled electrical alloyed steel sheet and strip delivered in the semi-pro
DC96/701119 DC96/701119. Magnetic materials. Part 8. Specification for individual materials. Section 3. Specification for cold rolled electrical non alloyed steel sheet and strip delivered in the semi
DC96/701120 DC96/701120. Magnetic materials. Part 8. Specification for individual materials. Section 4. Specification for cold rolled non-oriented electrical steel sheet and strip delivered in the ful
DC96/701121 DC96/701121. Magnetic materials. Part 8. Specification for individual materials. Section 7. Specification for grain-oriented electrical steel sheet and strip delivered in the fully process
DC96/201167 DC96/201167. Measurement of flow of cold potable water in closed conduits. Part 1. Specification for single meters
DC96/120905 DC96/120905. ISO/DIS 12218. Graphic technology. Process control. Offset platemaking
DC96/201190 DC96/201190. IEC 684-3-272. Flexible insulating sleeving. Part 3. Specification requirements for individual types of sleeving. Sheet 272. Heat-shrinkable elastomer sleeving, flame retarded
DC96/201402 DC96/201402. IEC 728-2. Cabled distribution systems for television and sound systems. Part 2. Electromagnetic compatibility of equipment. (IEC/100D/5/CDV)
DC96/702497 DC96/702497. Small craft. Portable fuel tanks and systems for outboard motors (ISO/DIS 13591)
DC96/702527 DC96/702527. Small craft. Fire protection. Part 1. Craft with a hull length of up to and including 15 m (ISO/DIS 9094-1.2) (ISO/CEN parallel enquiry)
DC96/120897 DC96/120897. Rubber or plastics. Coated fabrics. Determination of fogging characteristics of trim materials in the interior of automobiles (ISO/DIS 6452)
DC96/702340 DC96/702340. Aerospace series. Aerospace. Nut, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235°C, 900 MPa (at
DC96/702341 DC96/702341. Aerospace series. Aerospace. Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235°C, 900 MPa
DC96/702390 DC96/702390. Aerospace series. Aerospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strengt
DC96/702392 DC96/702392. Aerospace series. Aerospace. Drives, spline. Wrenching configuration. Metric series
DC96/201957 DC96/201957. prHD 548.3.S1. Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA, with highest voltage for equipment not exceeding 35 kV. Part 3. Determination of the
DC96/702412 DC96/702412. Aircraft ground support equipment. Specific requirements. Part 2. Catering vehicles (prEN 12312-2). Catering vehicles
DC96/120232 DC96/120232. BS 3900:Part E20. Methods of test for paints. Determination of pencil hardness (ISO/CD 15184)
BS 3HR 100:1978 BS 3HR 100:1978. Procedure for inspection and testing of wrought heat-resisting alloys
BS 5502-32:1990 BS 5502-32:1990. Buildings and structures for agriculture. Guide to noise attenuation
BS 5911-120:1989 BS 5911-120:1989. Precast concrete pipes, fittings and ancillary products. Specification for reinforced jacking pipes with flexible joints
BS 853-1:1996 BS 853-1:1996. Specification for vessels for use in heating systems. Calorifiers and storage vessels for central heating and hot water supply
BS EN 441-1:1995 BS EN 441-1:1995. Refrigerated display cabinets. Terms and definitions
BS EN ISP 11185-10:1996 BS EN ISP 11185-10:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT231.
BS EN 10204:1991 BS EN 10204:1991. Metallic products. Types of inspection documents
DC96/702415 DC96/702415. BS 5656:Part 2:Section 2.1. Safety rules for the construction and installation of escalators and passenger conveyors. Part 2. Specification for testing and examination. Sectio
DC96/121146 DC96/121146. Plastics piping systems for hot and cold water. Crosslinked polyethylene (PE-X). Part 5. Fitness for purpose of the system. Part 5 : Fitness for purpose of the system
DC96/121145 DC96/121145. Plastics piping system for hot and cold water. Crosslinked polyethylene (PE-X). Part 3. Fittings. Part 3 : Fittings
DC96/121144 DC96/121144. Plastics piping system for hot and cold water. Crosslinked polyethylene (PE-X). Part 2. Pipes. Part 2 : Pipes
DC96/121148 DC96/121148. Plastics piping systems for hot and cold water. Polybutylene (PB). Part 2. Pipes. Part 2 : Pipes
DC96/121149 DC96/121149. prEN 12319-3. Plastics piping systems for hot and cold water. Polybutylene (PB). Part 3. Fittings. Part 3 : Fittings
DC96/121150 DC96/121150. prEN 12319-5. Plastics piping systems for hot and cold water. Polybutylene (PB). Part 5. Fitness for purposes of the system. Part 5 : Fitness for purpose of the system
DC96/121143 DC96/121143. Plastics piping systems for hot and cold water. Crosslinked polyethylene (PE-X). Part 1. General. Part 1 : General
DC96/121147 DC96/121147. Plastics piping systems for hot and cold water. Polybutylene (PB). Part 1. General. Part 1 : General
BS 3555:1988 BS 3555:1988. Specification for ring wrenches
BS 122-3:1987 BS 122-3:1987. Milling cutters. Specification for milling cutters except screwed shank cutters
DC96/120674 DC96/120674. BS 3406. Methods for determination of particle size distribution. Part 9. Recommendations for the filter blockage method (mesh obscuration)
DC96/701934 DC96/701934. prEN 12308. Installations and equipment for LNG. Suitability testing of gaskets designed for flanged joints used on LNG piping
DC96/703347 DC96/703347. Amendment No 2 to ISO 4223-1:1989. Definitions of some terms used in the tyre industry. Part 1. Pneumatic tyres (ISO 4223-1:1989/DAM2). Pneumatic tyres
DC96/500673 DC96/500673. Ergonomics of the thermal environment. Instruments for measuring physical quantities (ISO/DIS 7726)
DC96/121283 DC96/121283. Rubber, vulcanized or thermoplastic. Determination of tension set at normal and high temperatures
BS 598-104:1989 BS 598-104:1989. Sampling and examination of bituminous mixtures for roads and other paved areas. Methods of test for the determination of density and compaction
BS 1377-3:1990 BS 1377-3:1990. Methods of test for soils for civil engineering purposes. Chemical and electro-chemical tests
DC96/520249 DC96/520249. BS ISO 10498:199X. Ambient air. Determination of sulfur dioxide. Ultraviolet fluorescence method (ISO/DIS 10498)
DC96/100419 DC96/100419. prEN 12310-1. Flexible sheets for roofing. Determination of nail shank tear resistance. Part 1. Bitumen sheets. Part 1 : Bitumen sheets for roof waterproofing - Determaintion
BS 5839-6:1995 BS 5839-6:1995. Fire detection and alarm systems for buildings. Code of practice for the design and installation of fire detection and alarm systems in dwellings
DC96/520294 DC96/520294. BS 6068. Water quality. Part 2. Physical, chemical and biochemical methods. New section. Determination of mercury using enrichment methods by amalgamation [prEN 12338]
DC96/121604 DC96/121604. prEN 12332-1. Rubber-or plastics coated fabrics. Determination of bursting strength. Part 1. Steel ball method
DC96/703810 DC96/703810. Aerospace series. Nuts, anchor, self-locking, fixed, 60° corner, with counterbore, in heat resisting steel, silver plated. Classification:1100 MPa (at ambient temperature)/425
DC96/703813 DC96/703813. Aerospace series. Drives, internal, offset cruciform, ribbed metric series (prEN 4319)
DC96/703814 DC96/703814. Aerospace series. Drives, internal, offset cruciform, metric series (prEN 4320)
DC96/703792 DC96/703792. Aerospace series. Aerospace. Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/4
DC96/703793 DC96/703793. Aerospace series. Aerospace. Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600MPa (at ambient temperature)/120°C, 600 MPa (at a
DC96/703794 DC96/703794. Aerospace series. Aerospace. Nuts, hexagonal, slotted (castellated), normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120
BS 5669:Part 1:1989 BS 5669:Part 1:1989. Particleboard. Methods of sampling, conditioning and test
BS 598-100:1987 BS 598-100:1987. Sampling and examination of bituminous mixtures for roads and other paved areas. Methods for sampling for analysis
BS EN ISO 3767-1:1996 BS EN ISO 3767-1:1996. Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Common symbols
BS EN 60264-3-1:1996, IEC 60264-3-1:1989 BS EN 60264-3-1:1996, IEC 60264-3-1:1989. Packaging of winding wires. Taper barrelled delivery spools. Basic dimensions
BS EN 60264-3-2:1996, IEC 60264-3-2:1990 BS EN 60264-3-2:1996, IEC 60264-3-2:1990. Packaging of winding wires. Taper barrelled delivery spools. Specification for returnable spools made from thermoplas
BS EN 60264-4-1:1996, IEC 60264-4-1:1989 BS EN 60264-4-1:1996, IEC 60264-4-1:1989. Packaging of winding wires. Methods of test. Delivery spools made from thermoplastic material
BS EN 60264-3-4:1996, IEC 60264-3-4:1990 BS EN 60264-3-4:1996, IEC 60264-3-4:1990. Packaging of winding wires. Taper barrelled delivery spools. Basic dimensions of containers for taper barrelled deliv
BS 5489-10:1992 BS 5489-10:1992. Road lighting. Code of practice for lighting for motorways
BS 7121-1:1989 BS 7121-1:1989. Code of practice for safe use of cranes. General
BS 1881-108:1983 BS 1881-108:1983. Testing concrete. Method for making test cubes from fresh concrete
BS 5489-7:1992 BS 5489-7:1992. Road lighting. Code of practice for the lighting of tunnels and underpasses
BS 5489-4:1992 BS 5489-4:1992. Road lighting. Code of practice for lighting for single-level road junctions including roundabouts
BS 5489-1:1992 BS 5489-1:1992. Road lighting. Guide to the general principles
BS 5502-80:1990 BS 5502-80:1990. Buildings and structures for agriculture. Code of practice for design and construction of workshops, maintenance and inspection facilities
BS 1377-2:1990 BS 1377-2:1990. Methods of test for soils for civil engineering purposes. Classification tests
BS 2955:1993 BS 2955:1993. Glossary of terms relating to particle technology
DC94/108810 DC94/108810. Building hardware. Corrosion resistance of hardware for doors, windows, shutters and curtain walling. Requirements and test methods (prEN 1670)
DC95/520684 DC95/520684. Environmental management. Environmental performance evaluation
94/341619DC 94/341619DC. Textiles and textiles products. Burning behaviour. Industrial and technical textiles. Detailed procedure to determine the burning behaviour of air filters. Ignitability. (ISO/
BS EN 60335-2-35:1995 BS EN 60335-2-35:1995. Specification for safety of household and similar electrical appliances. Particular requirements. Instantaneous water heaters
BS EN 50056:1991 BS EN 50056:1991. Specification for electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 100 %
BS EN 50054:1991 BS EN 50054:1991. Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
BS EN 701:1995 BS EN 701:1995. Fibre ropes for general service. General specification
BS EN 60684-1:1996, IEC 60684-1:1980 BS EN 60684-1:1996, IEC 60684-1:1980. Specification for flexible insulating sleeving. Specification for general requirements
BS EN 60034-16-1:1996, IEC 60034-16-1:1991 BS EN 60034-16-1:1996, IEC 60034-16-1:1991. Rotating electrical machines. Excitation systems for synchronous machines. Definitions
BS EN 60215:1996, BS 3192:1996 BS EN 60215:1996, BS 3192:1996. Safety requirements for radio transmitting equipment
BS 171-3:1987 BS 171-3:1987. Power transformers. Specification for insulation levels and dielectric tests
BS EN ISO/IEC 8072:1996 BS EN ISO/IEC 8072:1996. Information technology. Open Systems Interconnection. Transport service definition
BS ISO TR 10840:1993 BS ISO TR 10840:1993. Plastics. Burning behaviour. Guidance for development and use of fire tests
BS EN 696:1995 BS EN 696:1995. Fibre ropes for general service. Polyamide
BS EN 697:1995 BS EN 697:1995. Fibre ropes for general service. Polyester
BS 1932-2:1989 BS 1932-2:1989. Testing the strength of yarns and threads from packages. Methods for determination of knot strength and loop strength
BS 6564:Part 2:1991 BS 6564:Part 2:1991. Polytetrafluoroethylene (PTFE) materials and products. Specification for fabricated unfilled polytetrafluoroethylene products
BS 6622:1991 BS 6622:1991. Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3800/6600 V up to 19 000/33 000 V
BS EN 60317-27:1996, IEC 60317-27:1990 BS EN 60317-27:1996, IEC 60317-27:1990. Specifications for particular types of winding wires. Paper covered rectangular copper wire
BS EN ISO 7278-2:1996 BS EN ISO 7278-2:1996. Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters. Pipe provers
BS EN ISO 8222:1996 BS EN ISO 8222:1996. Petroleum measurement systems. Calibration. Temperature corrections for use with volumetric reference measuring systems
BS EN ISO 8311:1996 BS EN ISO 8311:1996. Refrigerated light hydrocarbon fluids. Calibration of membrane tanks and independent prismatic tanks in ships. Physical measurement
BS EN 635-3:1995 BS EN 635-3:1995. Plywood. Classification by surface appearance. Softwood
BS EN 635-2:1995 BS EN 635-2:1995. Plywood. Classification by surface appearance. Hardwood
BS EN ISO 7730:1995 BS EN ISO 7730:1995. Moderate thermal environments. Determination of the PMV and PPD indices and specification of the conditions for thermal comfort
BS EN 187101:1995 BS EN 187101:1995. Harmonized system of quality assessment for electronic components. Family specification: optical telecommunication cables to be used in ducts or direct buried appl
BS EN 60034-3:1996 BS EN 60034-3:1996. Rotating electrical machines. Specific requirements for turbine-type synchronous machines
BS EN 60317-0-1:1996, IEC 60317-0-1:1990 BS EN 60317-0-1:1996, IEC 60317-0-1:1990. Specification for particular types of winding wires. General requirements. Enamelled round copper wire
BS 3S 144:1995 BS 3S 144:1995. Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1130-1330 MPa)
DC94/710748 DC94/710748. Lifting tables (prEN 1570)
BS EN 60317-0-4:1996, IEC 60317-0-4:1990 BS EN 60317-0-4:1996, IEC 60317-0-4:1990. Specification for particular types of winding wires. General requirements. Glass-fibre wound bare or enamelled rectan
BS EN 60317-0-3:1996, IEC 60317-0-3:1990 BS EN 60317-0-3:1996, IEC 60317-0-3:1990. Specification for particular types of winding wires. General requirements. Enamelled round aluminium wire
BS EN 60317-0-2:1996, IEC 60317-0-2:1990 BS EN 60317-0-2:1996, IEC 60317-0-2:1990. Specification for particular types of winding wires. General requirements. Enamelled rectangular copper wire
DD ENV 1995-1-1:1994 DD ENV 1995-1-1:1994. Eurocode 5. Design of timber structures. General rules and rules for buildings (together with United Kingdom National Application Document)
BS EN ISO 75-2:1996, BS 2782-1:Methods 121A to 121C,ISO 75-2:1993 BS EN ISO 75-2:1996, BS 2782-1:Methods 121A to 121C,ISO 75-2:1993. Plastics. Determination of temperature of deflection under load. Pl
BS EN ISO 75-3:1996, BS 2782-1:Method 121D:1994,ISO 75-3:1993 BS EN ISO 75-3:1996, BS 2782-1:Method 121D:1994,ISO 75-3:1993. Plastics. Determination of temperature of deflection under load. High-stren
BS EN ISO 3451-4:1996 BS EN ISO 3451-4:1996. Plastics. Determination of ash. Polyamides
BS EN ISO 186:1996 BS EN ISO 186:1996. Paper and board. Sampling to determine average quality
BS 2000-163:1996, ISO 3987:1994 BS 2000-163:1996, ISO 3987:1994. Methods of test for petroleum and its products. Petroleum products. Lubricating oils and additives. Determination of sulfated ash
BS 2000-177:1996 BS 2000-177:1996. Methods of test for petroleum and its products. Determination of weak and strong acid number. Potentiometric titration method
BS 2000-280:1996 BS 2000-280:1996. Methods of test for petroleum and its products. Petroleum products and lubricants. Inhibited mineral turbine oils. Determination of oxidation stability
BS 2000-413:1996, ISO 8691:1994 BS 2000-413:1996, ISO 8691:1994. Methods of test for petroleum and its products. Petroleum products. Low levels of vanadium in liquid fuels. Determination by flameless
BS EN ISP 11190:1996 BS EN ISP 11190:1996. Information technology. International standardized profile FD13. Directory data definitions. FTAM use of the directory
BS EN ISO 75-1:1996, BS 2782-1:Method 121:1994,ISO 75-1:1993 BS EN ISO 75-1:1996, BS 2782-1:Method 121:1994,ISO 75-1:1993. Plastics. Determination of temperature of deflection under load. General test
BS EN ISO 1989:1996 BS EN ISO 1989:1996. Programming languages. COBOL
DD ENV 1186-11:1995 DD ENV 1186-11:1995. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration into mixtures of 14C-labelled synthetic triglycerides
BS 5626-2:1979, IEC 60554-2:1977 BS 5626-2:1979, IEC 60554-2:1977. Cellulosic papers for electrical purposes. Methods of test
BS 5502-33:1991 BS 5502-33:1991. Buildings and structures for agriculture. Guide to the control of odour pollution
BS EN ISO 7864:1996 BS EN ISO 7864:1996. Sterile hypodermic needles for single use
BS 5081:Part 1:1994, ISO 7886-1:1993 BS 5081:Part 1:1994, ISO 7886-1:1993. Sterile hypodermic syringes and needles. Specification for sterile, single-use hypodermic syringes for manual use
BS 3851:1990, ISO 1925:1990 BS 3851:1990, ISO 1925:1990. Glossary of terms used in the mechanical balancing of rotating machinery
BS 4962:1989 BS 4962:1989. Specification for plastics pipes and fittings for use as subsoil field drains
BS 5651:1989 BS 5651:1989. Method for cleansing and wetting procedures for use in the assessment of the effect of cleansing and wetting on the flammability of textile fabrics and fabric assemblies
BS 3397:1976 BS 3397:1976. Methods of test for synthetic rubber latices
BS 2011-2.2Sa:1977, IEC 60068-2-9:1975 BS 2011-2.2Sa:1977, IEC 60068-2-9:1975. Environmental testing. Guidance. Test Sa. Guidance for solar radiation testing
BS EN 188101:1995 BS EN 188101:1995. Harmonized system of quality assessment for electronic components. Family specification: single-mode dispersion unshifted (B1.1) optical fibre
BS 5500:1994 BS 5500:1994. Specification for unfired fusion welded pressure vessels
BS EN ISO 527-1:1996, BS 2782-3:Method 321:1994,ISO 527-1:1993 BS EN ISO 527-1:1996, BS 2782-3:Method 321:1994,ISO 527-1:1993. Plastics. Determination of tensile properties. General principles
BS EN ISP 12061-10:1996 BS EN ISP 12061-10:1996. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Provider supported ch
BS EN ISP 12061-9:1996 BS EN ISP 12061-9:1996. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Provider supported chai
BS EN ISP 12061-6:1996 BS EN ISP 12061-6:1996. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Application supported t
BS EN ISP 12061-5:1996 BS EN ISP 12061-5:1996. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Application supported t
BS EN ISP 12061-7:1996 BS EN ISP 12061-7:1996. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Provider supported unch
BS EN ISP 12061-8:1996 BS EN ISP 12061-8:1996. Information technology. Open systems interconnection. International standardized profiles: OSI distributed transaction procesing. Provider supported unch
BS EN 60893-3-6:1995, IEC 60893-3-6:1993 BS EN 60893-3-6:1995, IEC 60893-3-6:1993. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specificat
BS EN 60893-3-3:1995, IEC 60893-3-3:1993 BS EN 60893-3-3:1995, IEC 60893-3-3:1993. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specificat
BS EN 60439-1:1994, IEC 60439-1:1992 BS EN 60439-1:1994, IEC 60439-1:1992. Specification for low-voltage switchgear and controlgear assemblies. Specification for type-tested and partially type-tested
BS EN ISO 3037:1996 BS EN ISO 3037:1996. Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method)
BS EN 60893-3-2:1995, IEC 60893-3-2:1993 BS EN 60893-3-2:1995, IEC 60893-3-2:1993. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specificat
BS EN 60893-3-4:1995, IEC 60893-3-4:1993 BS EN 60893-3-4:1995, IEC 60893-3-4:1993. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specificat
BS EN 60893-3-5:1995, IEC 60893-3-5:1993 BS EN 60893-3-5:1995, IEC 60893-3-5:1993. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specificat
BS 3521-2:1991 BS 3521-2:1991. Terms relating to ophthalmic lenses and spectacle frames. Glossary of terms relating to spectacle frames
BS 4274-1:1968 BS 4274-1:1968. Visual acuity test types. Specification for test charts for clinically determining distance visual acuity
BS 5839-1:1988 BS 5839-1:1988. Fire detection and alarm systems for buildings. Code of practice for system design, installation and servicing
BS EN 10003-1:1995 BS EN 10003-1:1995. Metallic materials. Brinell hardness test. Test method
BS EN 111001:1996 BS EN 111001:1996. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: cathode ray tubes
BS EN 111101:1996 BS EN 111101:1996. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Display storage tubes
BS EN 136001:1996 BS EN 136001:1996. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: pulsed magnetrons (excluding frequency agile magne
BS EN 136002:1996 BS EN 136002:1996. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: CW magnetrons for RF heating or cooking applicatio
BS 3456-102.34:1987 BS 3456-102.34:1987. Specification for safety of household and similar electrical appliances. Particular requirements. Motor-compressors
BS 3877:1991 BS 3877:1991. Specification for metal cutting bandsaw blades
BS 5669:Part 2:1989 BS 5669:Part 2:1989. Particleboard. Specification for wood chipboard
BS 6375-2:1987 BS 6375-2:1987. Performance of windows. Specification for operation and strength characteristics
BS 680-2:1971 BS 680-2:1971. Specification for roofing slates. Metric units
BS 5502-43:1990 BS 5502-43:1990. Buildings and structures for agriculture. Code of practice for design and construction of poultry buildings
BS 5502-41:1990 BS 5502-41:1990. Buildings and structures for agriculture. Code of practice for design and construction of sheep buildings and pens
BS 5979:1993 BS 5979:1993. Code of practice for remote centres for alarm systems
BS EN 60255-21-1:1996, IEC 60255-21-1:1988 BS EN 60255-21-1:1996, IEC 60255-21-1:1988. Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Vibrati
BS EN 60255-21-2:1996, IEC 60255-21-2:1988 BS EN 60255-21-2:1996, IEC 60255-21-2:1988. Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Shock a
BS EN 61050:1992 BS EN 61050:1992. Specification for transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers). General and safety
BS EN 61121:1994, IEC 61121:1991 BS EN 61121:1994, IEC 61121:1991. Method for measuring the performance of tumbler dryers for household use
BS EN 129201:1995 BS EN 129201:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: wirewound inductors with ceramic or ferrite core.
BS EN 129102:1995 BS EN 129102:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: wirewound surface mounting inductors of assessed q
BS EN 129101:1995 BS EN 129101:1995. Harmonized system of quality assessment for electronic components. Blank detail specification: wirewound surface mounting inductors of assessed quality. Assessment
BS EN 123400:1992 BS EN 123400:1992. Harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards without through connections
BS EN 123300:1992 BS EN 123300:1992. Specification for harmonized system of quality assessment for electronic components. Sectional specification. Multilayer printed boards
BS EN 123200:1992 BS EN 123200:1992. Harmonized system of quality assessment for electronic components: Sectional specification: Single and double sided printed boards with plated through holes
BS EN 123100:1992 BS EN 123100:1992. Harmonized system of quality assessment for electronic components: Sectional specification: Single and double sided printed boards with plain holes
BS EN ISO 9687:1996 BS EN ISO 9687:1996. Dental equipment. Graphical symbols
BS EN ISO 10548:1996 BS EN ISO 10548:1996. Carbon fibre. Determination of size content
BS EN ISO 9173-1:1996 BS EN ISO 9173-1:1996. Dental extraction forceps. Screw and pin joint types
BS EN ISO 7711-3:1996 BS EN ISO 7711-3:1996. Dental rotary instruments. Diamond instruments. Grit sizes, designation and colour code
BS EN ISO 7711-2:1996 BS EN ISO 7711-2:1996. Dental rotary instruments. Diamond instruments. Discs
BS EN 60601-2-29:1996 BS EN 60601-2-29:1996. Medical electrical equipment. Particular requirements for safety. Specification for radiotherapy simulators
BS 4317-23:1990, ISO 7971-1986 BS 4317-23:1990, ISO 7971-1986. Methods of test for cereals and pulses. Determination of bulk density of cereals, called 'mass per hectolitre' (reference method)
BS 6758:1987, IEC 60558:1982 BS 6758:1987, IEC 60558:1982. Specification for type C helical video tape recorders
BS 3262:Part 2:1989 BS 3262:Part 2:1989. Hot-applied thermoplastic road marking materials. Specification for road performance
DC93/104553 DC93/104553. prEN 1075. Timber structures. Test methods. Joints made of punched metal plate fasteners
BS EN 60893-2:1995, IEC 60893-2:1992 BS EN 60893-2:1995, IEC 60893-2:1992. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Methods of test
BS 7306:1995 BS 7306:1995. Procedures for the operation of the UK scheme for the allocation of ISO DCC format OSI Network Layer addresses (including the operation of the associated UK Registration Aut
WD/TH30894 WD/TH30894. General Rules for Pressure Vessels (TBK 1-2)
BS EN ISO 3336:1996 BS EN ISO 3336:1996. Dentistry. Synthetic polymer teeth
BS EN ISO 2806:1997 BS EN ISO 2806:1997. Industrial automation systems. Numerical control of machines. Vocabulary
BS EN ISO 4119:1996 BS EN ISO 4119:1996. Pulps. Determination of stock concentration
BS EN ISO 9680:1996 BS EN ISO 9680:1996. Specification for dental operating light
BS EN 562:1995 BS EN 562:1995. Gas welding equipment. Pressure gauges used in welding, cutting and allied processes
BS 4161-6:1987 BS 4161-6:1987. Gas meters. Specification for rotary displacement and turbine meters for gas pressures up to 100 bar
BS 3243:1990 BS 3243:1990. Specification for hand-operated chain blocks
DD ENV 413-1:1995 DD ENV 413-1:1995. Masonry cement. Specification
BS EN 469:1995 BS EN 469:1995. Protective clothing for firefighters. Requirements and test methods for protective clothing for firefighting
BS EN 60061-1:1993 BS EN 60061-1:1993. Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Lamp caps
BS EN 60061-2:1993 BS EN 60061-2:1993. Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Lampholders
BS EN 207:1994 BS EN 207:1994. Specification for filters and equipment used for personal eye-protection against laser radiation
BS EN 60519-3:1996 BS EN 60519-3:1996. Safety in electroheat installations. Particular requirements for induction and conduction heating and induction melting installations
BS EN 60519-9:1996, IEC 60519-9:1987 BS EN 60519-9:1996, IEC 60519-9:1987. Safety in electroheat installations. Particular requirements for high-frequency dielectric heating installations
BS 3889-1:1983 BS 3889-1:1983. Methods for non-destructive testing of pipes and tubes. Methods of automatic ultrasonic testing for the detection of imperfections in wrought steel tubes
BS EN 60238:1992 BS EN 60238:1992. Specification for edison screw lampholders
BS EN 129202:1995 BS EN 129202:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: wirebound inductors with ceramic or ferrite core.
BS EN 60695-2-2:1995, IEC 60695-2-2:1991 BS EN 60695-2-2:1995, IEC 60695-2-2:1991. Fire hazard testing. Test methods. Needle-flame test
BS 1139-3:1994 BS 1139-3:1994. Metal scaffolding. Specification for prefabricated mobile access and working towers
BS EN 129200:1996 BS EN 129200:1996. Harmonized system of quality assessment for electronic components. Sectional specification: fixed inductors with ceramic or ferrite core wound with copper wire for
BS EN ISO 527-2:1996, BS 2782-3:Method 322:1994 BS EN ISO 527-2:1996, BS 2782-3:Method 322:1994. Plastics. Determination of tensile properties. Test conditions for moulding and extrusion plastics
BS EN 60276:1996, IEC 60276:1968 BS EN 60276:1996, IEC 60276:1968. Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings
BS EN ISO/IEC 9314-3:1996 BS EN ISO/IEC 9314-3:1996. Information processing systems. Fibre Distributed Data Interface (FDDI). Physical Layer Medium Dependent (PMD)
BS EN 168200:1996 BS EN 168200:1996. Harmonized system of quality assessment for electronic components. Sectional specification: quartz crystal units (qualification approval)
BS EN 60695-2-4/1:1993, IEC 60695-2-4/1:1991 BS EN 60695-2-4/1:1993, IEC 60695-2-4/1:1991. Fire hazard testing. Test methods. 1 kW nominal pre-mixed test flame and guidance
BS 6207-2:1995 BS 6207-2:1995. Mineral insulated cables with a rated voltage not exceeding 750 V. Terminations
BS 3889-2A:1986 BS 3889-2A:1986. Methods for non-destructive testing of pipes and tubes. Automatic eddy current testing of wrought steel tubes
BS 845-1:1987 BS 845-1:1987. Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids. Concise procedure
BS 8000-10:1995 BS 8000-10:1995. Workmanship on building sites. Code of practice for plastering and rendering
BS 4161:Part 5:1990 BS 4161:Part 5:1990. Gas meters. Specification for diaphragm meters for working pressures up to 7 bar
BS 4161:Part 3:1989 BS 4161:Part 3:1989. Gas meters. Specification for diaphragm meters of 6 cubic metres (or 212 cubic feet) per hour rating for working pressures up to 50 mbar
WD/BS5430-1 : 1990 WD/BS5430-1 : 1990 .
BS EN 129100:1995 BS EN 129100:1995. Harmonized system of quality assessment for electronic components. Sectional specification: wirewound surface mounting inductors
BS 499-1:1991 BS 499-1:1991. Welding terms and symbols. Glossary for welding, brazing and thermal cutting
BS 7334-3:1990, ISO 8322-3:1989 BS 7334-3:1990, ISO 8322-3:1989. Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments
BS 887:1982 BS 887:1982. Specification for precision vernier callipers
BS EN 60335-2-53:1991 BS EN 60335-2-53:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Electric sauna heating appliances
BS 6991:1990 BS 6991:1990. Specification for 6/10 A, two-pole weather-resistant couplers for household, commercial and light industrial equipment
BS 7334-1:1990, ISO 8322-1:1989 BS 7334-1:1990, ISO 8322-1:1989. Measuring instruments for building construction. Methods for determining accuracy in use: theory
BS 7334-2:1990, ISO 8322-2:1989 BS 7334-2:1990, ISO 8322-2:1989. Measuring instruments for building construction. Methods for determining accuracy in use: measuring tapes
BS 6972:1988 BS 6972:1988. Specification for general requirements for luminaire supporting couplers for domestic, light industrial and commercial use
BS EN 61046:1995, IEC 61046:1993 BS EN 61046:1995, IEC 61046:1993. Specification for d.c. or a.c. supplied electronic step-down convertors for filament lamps. General and safety requirements
BS 3535-2:1990 BS 3535-2:1990. Isolating transformers and safety isolating transformers. Specification for transformers for reduced system voltage
BS 7499:Part 1:1991 BS 7499:Part 1:1991. Manned security services. Code of practice for static guarding and mobile patrol services
BS 2015:1992 BS 2015:1992. Glossary of paint and related terms
BS EN 60601-2-17:1996, BS 5724-2.17:1990,IEC 60601-2-17:1989 BS EN 60601-2-17:1996, BS 5724-2.17:1990,IEC 60601-2-17:1989. Medical electrical equipment. Particular requirements for safety. Specificati
BS 6109-2:1989 BS 6109-2:1989. Tail lifts, mobile lifts and ramps associated with vehicles. Code of practice for passenger lifts and ramps
BS 7171:1989 BS 7171:1989. Specification for mobile elevating work platforms
BS 6109-1:1981 BS 6109-1:1981. Tail lifts, mobile lifts and ramps associated with vehicles. Code of practice for tail lifts
BS 4533:Part 102:Section 102.2:1990, EN 60598-2-2:1989 BS 4533:Part 102:Section 102.2:1990, EN 60598-2-2:1989. Luminaires. Particular requirements. Specification for recessed luminaires
BS 5964-1:1990, ISO 4463-1:1989 BS 5964-1:1990, ISO 4463-1:1989. Building setting out and measurement. Methods of measuring, planning and organization and acceptance criteria
BS 6953:1988, ISO 7078-1985 BS 6953:1988, ISO 7078-1985. Glossary of terms for procedures for setting out, measurement and surveying in building construction (including guidance notes)
BS 7307-1:1990, ISO 7976-1:1990 BS 7307-1:1990, ISO 7976-1:1990. Building tolerances. Measurement of buildings and building products. Methods and instruments
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
