BIS Standards Catalogue
BS 5689-3.1:1996, IEC 60394-3-1:1976 BS 5689-3.1:1996, IEC 60394-3-1:1976. Varnished fabrics for electrical purposes. Specifications for individual materials. Oleoresinous varnish. Cotton base, OR/C
BS EN 61237-2:1995, IEC 61237-2:1995 BS EN 61237-2:1995, IEC 61237-2:1995. Broadcast video tape recorders. Methods of measurement. Electrical measurements of analogue composite video signals
BS EN 50123-1:1996 BS EN 50123-1:1996. Railway applications. Fixed installations. D.C. switchgear. General
BS 7251-2:1995, ISO 7207-1:1994 BS 7251-2:1995, ISO 7207-1:1994. Orthopaedic joint prostheses. Specification for classification, definitions and designation of dimensions of femoral and tibial compone
BS 7251-12:1995, ISO 7206-8:1995 BS 7251-12:1995, ISO 7206-8:1995. Orthopaedic joint prostheses. Specification for endurance of stemmed femoral components with application of torsion
BS AU 50-4.4.1a:1995, ISO 4251-3:1994 BS AU 50-4.4.1a:1995, ISO 4251-3:1994. Tyres and wheels. Rim profiles and dimensions. Agricultural tractor and machine rims. Specification for ply-rating marked s
BS 6492:Part 2:1995 BS 6492:Part 2:1995. Transportable accommodation units. Recommendations for transportation and siting, with guidance on occupancy
DC95/123352 DC95/123352. prEN 1566-6 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly (vinyl chloride) (PVC-C). Part 6. R
DC95/123450 DC95/123450. prEN 1519-6. Plastics piping systems for soil and waste discharge systems (low and high temperature) within the building structure. Polyethylene (PE). Part 6. Recommended prac
DC95/123451 DC95/123451. prEN 1565-6. Plastics piping system for soil and waste discharge systems (low and high temperature) within the building structure. Styrene-copolymer blends (SAN+PVC). Part 6.
DC95/541543 DC95/541543. ISO/CD 12611 Cinematography. Audio head tones for use in international exchange. Specifications and location
DC95/561675 DC95/561675. BS ISO 10341. Optics and optical instruments. Refractor heads (ISO/DIS 10341-2)
DC95/561676 DC95/561676. BS ISO 10342. Optics and optical instruments. Ophthalmic instruments. Eye-refractometers (ISO/DIS 10342-2)
DC95/561677 DC95/561677. BS ISO 10343. Optics and optical instruments. Ophthalmic instruments. Ophthalmic instruments. Ophthalmometers (ISO/DIS 10343-2)
DC95/123484 DC95/123484. ISO/DIS 11922-2. Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Part 2. Inch series
DC95/123483 DC95/123483. ISO/DIS 161-2. Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressure. Part 2. Inch series
DC95/123482 DC95/123482. ISO/DIS 161-1. Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Part 1. Metric series
DC95/123487 DC95/123487. (ISO/DIS 813) Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90° peeling method (revision of second edition ISO 813:1986)
DC95/402426 DC95/402426. Draft BS ISO 9000-2. Quality management and quality assurance standards. Part 2. Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 (ISO/CD 9000-2)
DC95/402434 DC95/402434. 'Design specification' for the structure and content for a standard on quality management principles and guidelines on their application (ISO 9004-8)
DC95/402433 DC95/402433. 'Design specification' for the structure and content for the revision of ISO 9004-1:1994
DC95/402432 DC95/402432. 'Design specification' for the structure and content for the revisions of ISO 9001:1994, ISO 9002:1994 and ISO 9003:1994
DC95/402431 DC95/402431. 'Design specification' for the structure and content for the revision of ISO 9000-1:1994
DC95/402428 DC95/402428. Draft BS ISO 9000-3: Quality management and quality assurance standards. Part 3. Generic guidelines for the application of ISO 9001 to the design, development, supply, install
BS ISO 3342:1995 BS ISO 3342:1995. Textile glass. Mats. Determination of tensile breaking force
BS ISO 1887:1995 BS ISO 1887:1995. Textile glass. Determination of combustible-matter content
BS 7164-28.2:1995, ISO 8053:1995 BS 7164-28.2:1995, ISO 8053:1995. Chemical tests for raw and vulcanized rubber. Methods for determination of copper content. Photometric method
BS 5790-2:1995, ISO 7617-2:1994 BS 5790-2:1995, ISO 7617-2:1994. Coated fabrics for upholstery. Specification for PVC coated woven fabrics
BS EN 60041:1995 BS EN 60041:1995. Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
BS EN 1476:1996 BS EN 1476:1996. EDI. Message. Direct payment valuation message (CONDVP)
BS EN 1477:1996 BS EN 1477:1996. EDI. Message. Establishment of contract (CONEST)
BS EN 1481:1996 BS EN 1481:1996. EDI. Message. Tender (CONTEN)
BS EN 1480:1996 BS EN 1480:1996. EDI. Message. Quantity valuation message (CONQVA)
BS EN 1478:1996 BS EN 1478:1996. EDI. Message. Invitation to tender (CONITT)
BS EN 1475:1996 BS EN 1475:1996. EDI. Directory. D93-A
BS EN ISO 7787-2:1995 BS EN ISO 7787-2:1995. Dental rotary instruments. Cutters. Carbide laboratory cutters
BS EN 3112:1995 BS EN 3112:1995. Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235°C
BS EN 2889:1995 BS EN 2889:1995. Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235°C
BS EN 2888:1995 BS EN 2888:1995. Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature)/4
BS EN 2887:1995 BS EN 2887:1995. Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature)/425°C
BS EN 2859:1995 BS EN 2859:1995. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C
BS EN 2549:1995 BS EN 2549:1995. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient temperatur
BS EN 2413:1995 BS EN 2413:1995. Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C
BS EN 821-1:1995 BS EN 821-1:1995. Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Determination of thermal expansion
BS 6448:1995 BS 6448:1995. Specification for gas appliance governors of DN greater than 50 and for inlet pressures up to 200 mbar
EP 201:1995 EP 201:1995. BSI Electronic Book-Information Security Management
BS 7834:1995, ISO 9951:1993 BS 7834:1995, ISO 9951:1993. Specification for turbine meters used for the measurement of gas flow in closed conduits
BS 6091-3.1:1995, IEC 60667-3-1:1986 BS 6091-3.1:1995, IEC 60667-3-1:1986. Vulcanized fibre for electrical purposes. Specifications for individual materials. Flat sheets
BS 7737-1:1995, IEC 60377-1:1973 BS 7737-1:1995, IEC 60377-1:1973. Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. General
DC95/123530 DC95/123530. ISO/DIS 10933. Polythene (PE) valves for gas distribution systems
DC95/521321 DC95/521321. BS ISO 10845. Acoustics. Frequency weighting "A" for noise measurement (ISO/DIS 10845)
DC95/521326 DC95/521326. BS ISO 10847. Acoustics. In-situ determination of insertion loss of outdoor noise barriers of all types (ISO/DIS 10847)
DC95/561707 DC95/561707. Optics and optical instruments. Endoscopes. Determination of maximum insertion portion width of endoscopes and certain endoscopic equipment (ISO/DIS 13537)
DC95/708882 DC95/708882. Copper and copper alloys. Copper cathodes (prEN 1978)
BS EN ISO 1211:1995, BS 1741-3:1995 BS EN ISO 1211:1995, BS 1741-3:1995. Milk. Determination of fat content. Gravimetric method (reference method)
BS 4250:1995 BS 4250:1995. Specification for commercial butane and propane
PD 3542:1995 PD 3542:1995. Standards and quality management: an integrated approach
BS EN 60335-2-10:1995 BS EN 60335-2-10:1995. Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for floor treatment machines and
BS EN ISO 8987:1996, BS 2782-8:Methods 835I & J BS EN ISO 8987:1996, BS 2782-8:Methods 835I & J. Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate
BS EN ISO 8619:1996, BS 2782-8:Method 835H BS EN ISO 8619:1996, BS 2782-8:Method 835H. Plastics. Phenolic resin powder. Determination of flow distance on a glass plate
BS EN ISO 9371:1995, BS 2782-7:Methods 734A to D BS EN ISO 9371:1995, BS 2782-7:Methods 734A to D. Plastics. Phenolic resins in the liquid state or in solution. Determination of viscosity
BS EN ISO 8989:1995, BS 2782-4:Method 451T BS EN ISO 8989:1995, BS 2782-4:Method 451T. Plastics. Liquid phenolic resins. Determination of water miscibility
BS 1016-108.3:1995, ISO 567:1995 BS 1016-108.3:1995, ISO 567:1995. Methods for analysis and testing of coal and coke. Tests special to coke. Determination of bulk density (small container)
BS 1016-108.4:1995, ISO 1013:1995 BS 1016-108.4:1995, ISO 1013:1995. Methods for analysis and testing of coal and coke. Tests special to coke. Determination of bulk density (large container)
BS EN ISO 10363:1995 BS EN ISO 10363:1995. Hot-melt adhesives. Determination of thermal stability
BS EN ISO 10365:1995 BS EN ISO 10365:1995. Adhesives. Designation of main failure patterns
BS EN ISO 9664:1995 BS EN ISO 9664:1995. Adhesives. Test methods for fatigue properties of structural adhesives in tensile shear
BS ISO/IEC 8823-2:1995 BS ISO/IEC 8823-2:1995. Information technology. Open systems interconnection. Connection-orientated presentation protocol. Connection-oriented presentation protocol. Protocol Im
BS ISO/IEC 7826-2:1994 BS ISO/IEC 7826-2:1994. Information technology-general structures for the interchange of code values. Registration of coding schemes
BS ISO/IEC 7826-1:1994 BS ISO/IEC 7826-1:1994. Information technology-general structures for the interchange of code values. Identification of coding schemes
BS ISO/IEC ISP 10608-14:1995 BS ISO/IEC ISP 10608-14:1995. Information technology. International standardized profile TAnnnn. Connection-mode transport service over connectionless-mode network service
DC95/208320 DC95/208320. Specification for Three Core Polymeric Insulated Power Cables for System Voltages of 6.35/11kV (Implementation of portions of CENELEC Harmonization Document HD 620: Distributi
DC95/104913 DC95/104913. ISO/DIS 12491. Statistical methods for quality control of building materials and components
DC95/570310 DC95/570310. Diving Accessories. Snorkels. Safety requirements and test methods (=prEN 1972)
DC95/709692 DC95/709692. Road vehicles. Diagnostic systems. Specification of diagnostic services (ISO/DIS 14229)
DC95/709693 DC95/709693. Road vehicles. Diagnostic systems. Keyword protocol 2000. Part 1. Physical layer (ISO/DIS 14230-1). Physical layer
DC95/709694 DC95/709694. Road vehicles. Diagnostic systems. Keyword protocol 2000. Part 2. Communication (ISO/DIS 14230-2). Data link layer
DC95/709695 DC95/709695. Road vehicles. Diagnostic systems. Keyword protocol 2000. Part 3. Implementation (ISO/DIS 14230-3). Application layer
DC95/208066 DC95/208066. IEC 1290-1-1. Basic specification for optical fibre amplifier test methods. Part 1.Test methods for gain parameters. Section 1.Optical spectrum analyzer method. (86/75/CDV)
DC95/208067 DC95/208067. IEC 1290-1-2. Basic specification for optical fibre amplifier test methods. Part 1.Test methods for gain parameters. Section 2. Electrical spectrum analyzer test method. (86/7
DC95/208069 DC95/208069. IEC 1290-6-1. Basic specification for optical fibre amplifier test methods. Part 6.Test methods for pump leakage parameters. Section 1. Optical demultiplexer test method. (86/
DC95/208070 DC95/208070. IEC 1290-7-1. Basic specification for optical fibre amplifier test methods. Part 7. Test methods for out-of-band insertion losses. Section 1. Filtered power meter test method
DD 225:1995 DD 225:1995. Determination of anti-wear properties of hydraulic fluids using the oscillating pin on rotating disc method
BS EN ISO 6708:1996 BS EN ISO 6708:1996. Pipework components. Definition and selection of DN (nominal size)
BS EN 3150:1995 BS EN 3150:1995. Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718)
BS EN 3611:1995 BS EN 3611:1995. Spigots. Dimensions and fit selection. Design standard
BS EN 3151:1995 BS EN 3151:1995. Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718)
BS EN 3721:1995 BS EN 3721:1995. Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel, FE-PA92HT (A 286), MoS2 coated. Classification: 1100 MPa (at ambient temperature)/425°C
BS EN 3722:1995 BS EN 3722:1995. Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), MoS2 coated. Classification: 1100 MPa (at ambient temperature)/425°C
BS EN 2909:1995 BS EN 2909:1995. Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 1100 MPa (at ambient temperature)/650°C
BS EN 2911:1995 BS EN 2911:1995. Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 1100 MPa (at ambient temperature)/650°C
BS EN 994:1996 BS EN 994:1996. Textile floor coverings. Determination of the side length, squareness and straightness of tiles
BS EN 995:1996 BS EN 995:1996. Textile floor coverings. Assessment of the creep of the backings
BS ISO 11628:1995 BS ISO 11628:1995. Graphic technology. Prints and printing inks. Determination of resistance of prints to acids
DC95/644131 DC95/644131. British Standard Implementation of ISO/IEC 13818-4. Information technology. Generic coding of moving pictures as associated audio information. Part 4: Compliance testing (ISO/
DC95/208502 DC95/208502. IEC 1189-2. Test methods for electrical materials, interconnection structures and assemblies. Part 2: Test methods for materials for interconnection structures. 52/569/CD. Gen
DC95/710015 DC95/710015. Cranes. Safe use. Part 1. General. (ISO/DIS 12480-1)
DC95/561839 DC95/561839. Implants for surgery. Metallic materials. Part 8:Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy. (ISO/DIS 5832-8)
DC95/561838 DC95/561838. Implants for surgery. Metallic materials. Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO/DIS 5832-6)
DC95/561837 DC95/561837. Implants for surgery. Metallic materials. Part 1 Wrought stainless steel. (ISO/DIS 5832-1)
BS 5412:1996 BS 5412:1996. Specification for low-resistance single taps and combination tap assemblies (nominal size ? and ?) suitable for operation at PN 10 max. and a minimum flow pressure of 0.01 M
DD ENV 1798:1996 DD ENV 1798:1996. Paper and board intended to come into contact with foodstuffs. Determination of seven specified polychlorinated biphenyls (PCB)
BS ISO 3298:1994 BS ISO 3298:1994. Photography. Processing chemicals. Specifications for glacial acetic acid
BS ISO 3628:1994 BS ISO 3628:1994. Photography. Processing chemicals. Specifications for boric acid, granular
BS ISO 3625:1994 BS ISO 3625:1994. Photography. Processing chemicals. Specifications for potassium hydroxide
BS ISO 5655:1993 BS ISO 5655:1993. Photography. Film dimensions. Industrial radiography
BS EN 634-1:1995 BS EN 634-1:1995. Cement-bonded particle boards. Specification. General requirements
BS EN 993-16:1995 BS EN 993-16:1995. Methods of test for dense shaped refractory products. Determination of resistance to sulfuric acid
BS EN 1094-4:1995 BS EN 1094-4:1995. Insulating refractory products. Determination of bulk density and true porosity
BS EN 1094-5:1995 BS EN 1094-5:1995. Insulating refractory products. Determination of cold crushing strength
BS ISO 6038:1993 BS ISO 6038:1993. Cinematography. Splices for use on 70 mm, 65 mm, 35 mm and 16 mm motion-picture films. Dimensions and locations
BS ISO 7343:1993 BS ISO 7343:1993. Cinematography. Two-track photographic sound records on 35 mm motion-picture prints. Positions and width dimensions
BS ISO 8581:1994 BS ISO 8581:1994. Photography. Electronic flash equipment. Connectors to synchro-cord
BS ISO 3943:1993 BS ISO 3943:1993. Photography. Processing chemicals. Specifications for anhydrous sodium acetate
BS ISO 3772:1991 BS ISO 3772:1991. Photography. Film dimensions. Rolls for photocomposition
BS ISO 4090:1991 BS ISO 4090:1991. Photography. Film dimensions. Medical radiography
BS ISO 1223:1993 BS ISO 1223:1993. Cinematography. Picture areas for motion-picture films and slides for television. Position and dimensions
BS ISO 2827:1988 BS ISO 2827:1988. Photography. Electronic flash equipment. Determination of light output and performance
DC95/521353 DC95/521353. Acoustics. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 1: Principles and guidelines (ISO/DIS 10846-1)
DC95/501715 DC95/501715. BS 6394. Trace elements in milk and milk products. New part. Method for the determination of lead content (reference meothd) (ISO/DIS 6733.2)
BS 598:Part 110:1996 BS 598:Part 110:1996. Sampling and examination of bituminous mixtures for roads and other paved areas. Methods of test for the determination of wheel-tracking rate
BS AU 263:1995, ISO 2347:1994 BS AU 263:1995, ISO 2347:1994. Road vehicles. M14 X 1,25 compact spark-plugs with conical seating and their cylinder head housing
BS AU 264:1995, ISO 2345:1994 BS AU 264:1995, ISO 2345:1994. Road vehicles. M18 X 1,5 spark-plugs with conical seating and their cylinder head housing
BS 7839:1995, ISO 10911:1994 BS 7839:1995, ISO 10911:1994. Solid hardmetal end-mills with parallel shanks. Dimensions
BS 6200-3.28.3:1995, ISO 10701:1994 BS 6200-3.28.3:1995, ISO 10701:1994. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of sulphur. Steel and iron: s
BS 6200-3.26.1:1995, ISO 439:1994 BS 6200-3.26.1:1995, ISO 439:1994. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of silicon. Steel and iron: gravi
BS AU 261:1995, ISO 2974:1994 BS AU 261:1995, ISO 2974:1994. Diesel engines. High-pressure fuel injection pipe end-connections with 60° female cone
BS 7201-2:1995, ISO 10945:1994 BS 7201-2:1995, ISO 10945:1994. Hydraulic fluid power. Gas loaded accumulators. Dimensions of gas ports
BS EN ISO 3953:1995 BS EN ISO 3953:1995. Metallic powders. Determination of tap density
BS AU 260-4:1995, ISO 7876-4:1994 BS AU 260-4:1995, ISO 7876-4:1994. Fuel injection equipment. Vocabulary. High-pressure pipes and end-connections
BS EN 516:1995 BS EN 516:1995. Prefabricated accessories for roofing. Installations for roof access. Walkways, treads and steps
BS EN 517:1995 BS EN 517:1995. Prefabricated accessories for roofing. Roof safety hooks
BS EN ISO 5961:1995, BS 6068-2.21:1995 BS EN ISO 5961:1995, BS 6068-2.21:1995. Water quality. Determination of cadmium by atomic absorption spectrometry
BS EN ISO 3727:1995 BS EN ISO 3727:1995. Butter. Determination of water, solids-not-fat and fat contents on the same test portion (reference method)
DC95/501746 DC95/501746. Survival suits. Part 3. Test methods (prEN 1913-3). Part 3: Test methods
DC95/123656 DC95/123656. Optics and optical instruments. Microscopes. Marking of stereo microscopes (ISO/DIS 11883)
DC95/123655 DC95/123655. Optics and optical instruments. Microscopes. Interfacing connection for 35mm SLR photo cameras (ISO/DIS 11882)
DC95/123653 DC95/123653. BS 7011. Section 2.2:1990. Optics and optical instruments. Microscopes. Slides. Quality of material, standards of finish and mode of packaging (ISO/DIS 8037-2)
DC95/123654 DC95/123654. BS 7012: Part 9:1989. Optics and optical instruments. Microscopes. Interfacing connection type c (ISO/DIS 10935)
DC95/123658 DC95/123658. BS 7011:Section 3.2:1990. Optics and optical instruments. Microscopes. Cover glasses. Quality of materials, standards and mode of packaging (ISO/DIS 8255-2)
DC95/123463 DC95/123463. BS 5076. Specification for electrically heated storage cabinets for liquids in sealed containers
DC95/208951 DC95/208951. IEC 931. Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Part 1. General. Performance, testing and rati
DC95/561932 DC95/561932. prEN ISO 14602. Non-active surgical implants. Implants for osteosynthesis. Particular requirements
BS EN 3202:1995 BS EN 3202:1995. Holes and traps for T-head bolts. Design standard
BS EN 3720:1995 BS EN 3720:1995. Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated. Classification: 1100 MPa (at ambient temperature)/425°C
BS EN ISO 8974:1995, BS 2782-4:Method 451R BS EN ISO 8974:1995, BS 2782-4:Method 451R. Plastics. Phenolic resins. Determination of residual phenol content by gas chromatography
BS EN ISO 10082:1996 BS EN ISO 10082:1996. Plastics. Phenolic resins. Definitions and test methods
BS EN ISO 8975:1995, BS 2782-4:Method 451K BS EN ISO 8975:1995, BS 2782-4:Method 451K. Plastics. Phenolic resins. Determination of pH
BS EN 60811-2-1:1995, IEC 60811-2-1:1986 BS EN 60811-2-1:1995, IEC 60811-2-1:1986. Insulating and sheathing materials of electric cables. Common test methods. Methods specific to elastomeric compounds
BS EN 60811-4-1:1995, IEC 60811-4-1:1985 BS EN 60811-4-1:1995, IEC 60811-4-1:1985. Methods specific to polyethylene and polypropylene compounds. Resistance to environmental stress cracking. Wrapping t
BS EN 1237:1995 BS EN 1237:1995. Fertilizers. Determination of bulk density (tapped)
BS EN 1236:1995 BS EN 1236:1995. Fertilizers. Determination of bulk density (loose)
BS 6782:Part 7:1995 BS 6782:Part 7:1995. Binders for paints. Method for determination of free-formaldehyde content of amino resins (sodium sulfite titrimetric method)
BS EN 10016-1:1995 BS EN 10016-1:1995. Non-alloy steel rods for drawing and/or cold rolling. General requirements
DD 226:1996 DD 226:1996. Method for determining resistance to permanent deformation of bituminous mixtures subject to unconfined dynamic loading
BS ISO 11243:1994 BS ISO 11243:1994. Cycles. Luggage carriers for bicycles. Concepts, classification and testing
BS IEC 1000-3-5:1994 BS IEC 1000-3-5:1994. Electromagnetic compatibility (EMC). Limits. Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated curr
BS EN 60068-2-44:1995, IEC 60068-2-44:1995 BS EN 60068-2-44:1995, IEC 60068-2-44:1995. Environmental testing. Test methods. Tests. Guidance on Test T. Soldering
BS EN 60335-2-12:1995, IEC 60335-2-12:1992 BS EN 60335-2-12:1995, IEC 60335-2-12:1992. Specification for safety of household and similar electrical appliances. Particular requirements. Warming plates
BS EN 134000:1995 BS EN 134000:1995. Harmonized system of quality assessment for electronic components. Generic specification: variable capacitors. (Qualification approval and capability approval)
DD ENV 1292:1995 DD ENV 1292:1995. Identification card systems. Integrated circuit(s) cards and interface services. Additional test methods
BS 7459-1:1995, ISO 7749-1:1995 BS 7459-1:1995, ISO 7749-1:1995. Rotating sprinklers for irrigation equipment. Specification for design and operational requirements
BS ISO 8140:1991 BS ISO 8140:1991. Pneumatic fluid power. Cylinders, 1 000 kPa (10 bar) series. Rod end clevis. Mounting dimensions
BS ISO 8139:1991 BS ISO 8139:1991. Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Rod end spherical eyes. Mounting dimensions
BS ISO 6431:1992 BS ISO 6431:1992. Pneumatic fluid power. Single rod cylinders, 1 000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 320 mm. Mounting dimensions
BS EN ISO 8662-4:1995, ISO 8662-4:1994 BS EN ISO 8662-4:1995, ISO 8662-4:1994. Hand-held portable power tools. Measurement of vibrations at the handle. Grinding machines
BS EN ISO 8662-6:1995, ISO 8662-6:1994 BS EN ISO 8662-6:1995, ISO 8662-6:1994. Hand-held portable power tools. Measurement of vibrations at the handle. Impact drills
WD/PD0007 : 1995 WD/PD0007 : 1995. Guide to the Code of Practice for Information Security Management
DC95/710268 DC95/710268. Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 2. Determination of nickel content (
DC95/710269 DC95/710269. Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 3. Determination of copper content (
DC95/710270 DC95/710270. Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 4. Determination of cobalt content (
DC95/105686 DC95/105686. BS 6399:Part3. (New edition) (incorporating amendment no 2) Loadings for buildings. Part 3. Code of practice for imposed roof loads
DC95/710372 DC95/710372. Cycles. Lighting and retro-reflective devices. Photometric and physical requirements. Part 1. Lighting equipment (Revision of ISO 6742-1). Lighting equipment
DC95/710373 DC95/710373. Cycles. Lighting and retro-reflective devices. Photometric and physical requirements. Part 2. Retro-reflective devices. (Revision of ISO 6742-2). Retro-reflective devices
DC95/710267 DC95/710267. Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 1. General requirements and sample d
DC95/710365 DC95/710365. Agricultural equipment. Radio frequency identification of animals. Code structure [revision of first edition (ISO 11784:1994)]
DC95/710163 DC95/710163. Electrically propelled road vehicles. Road performances. Measurement of energy performances. Part 1. Pure electric vehicles (prEN 1986-1)
DC95/710164 DC95/710164. Electrically propelled road vehicles. Specific prescriptions for safety. Part 1. On board energy storage (prEN 1987-1)
DC95/710165 DC95/710165. Electrically propelled road vehicles. Specific prescriptions for safety. Part 2. Functional safety means and protection against failures (prEN 1987-2)
BS ISO/IEC 8613-3:1995 BS ISO/IEC 8613-3:1995. Information processing. Text and office systems. Office document architecture (ODA) and interchange format. Abstract interface for the manipulation of OD
BS ISO/IEC 10026-6:1995 BS ISO/IEC 10026-6:1995. Information technology. Open systems interconnection. Distributed transaction processing. Unstructured data transfer
BS ISO 832:1994 BS ISO 832:1994. Information and documentation. Bibliographic description and references. Rules for the abbreviation of bibliographic terms
BS ISO/IEC 11582:1995 BS ISO/IEC 11582:1995. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Generic functional protocol for t
BS ISO/IEC 8650-2:1995 BS ISO/IEC 8650-2:1995. Information technology. Open systems interconnection. Connection-oriented protocol for the Association Control Service Element . Protocol Implementation
BS ISO/IEC ISP 11185-14:1995 BS ISO/IEC ISP 11185-14:1995. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions
BS ISO 6149-1:1993 BS ISO 6149-1:1993. Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing. Ports with O-ring in truncated housing
BS ISO 6149-2:1993 BS ISO 6149-2:1993. Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing. Heavy-duty (S series) stud ends. Dimensions, design, te
BS ISO 6149-3:1993 BS ISO 6149-3:1993. Connections for fluid power and general use. Ports and stud ends with ISO 261 threads and O-ring sealing. Light-duty (L series) stud ends. Dimensions, design, te
DC95/209347 DC95/209347. Methods for measuring the performance of electric clothes washer dryers for household use (CLC/TC 59X(Sec)140)
DC95/209388 DC95/209388. IEC 945. Maritime navigation and radiocommunication equipment and systems. General requirements, methods of testing and required test results. (Third edition) [IEC/80/106/CDV]
BS EN 10249-2:1996 BS EN 10249-2:1996. Cold formed sheet piling of non alloy steels. Tolerances on shape and dimensions
BS EN 10249-1:1996 BS EN 10249-1:1996. Cold formed sheet piling of non alloy steels. Technical delivery conditions
BS EN 10248-1:1996 BS EN 10248-1:1996. Hot rolled sheet piling of non alloy steels. Technical delivery conditions
BS EN ISO/IEC 7498-1:1995, ISO/IEC 7498-1:1994 BS EN ISO/IEC 7498-1:1995, ISO/IEC 7498-1:1994. Information technology. Open systems interconnection. Basic reference model. The basic model
DD ENV 1614:1995 DD ENV 1614:1995. Healthcare informatics. Structure for nomenclature, classification and coding of properties in clinical laboratory science
DD ENV 1613:1996 DD ENV 1613:1996. Medical informatics. Messages for exchange of laboratory information
BS AU 50-2.7a:1995 BS AU 50-2.7a:1995. Tyres and wheels. Wheels and rims. Code of practice for the selection and care of tyres and wheels for commercial vehicles
DC95/561957 DC95/561957. Dental operator's stool (ISO/DIS 7493)
DC95/209527 DC95/209527. IEC 1314-1-1. Blank detail specification for fan-out environmental categories 1, 2, 3, 5 and 99 (86B/613/CDV)
DC95/209526 DC95/209526. IEC 1754-8. Fibre optic connector interfaces. Part 8. Type CF08 connector family (86B/609/CDV)
DC95/521473 DC95/521473. Child care articles. Baby walking frames. Safety requirements and test methods (prEN 1273)
DC95/709437 DC95/709437. prEN 12055. Liquid chilling packages and heat pumps with electrically driven compressors. Cooling mode. Definitions, testing and requirements
DC95/209528 DC95/209528. IEC 1097-7. Global maritime distress and safety system (GMDSS). Part 7. Shipborne VHF radiotelephone transmitter and receiver. Operational and performance requirements, method
DC95/209529 DC95/209529. IEC 1097-12. Global maritime distress and safety system (GMDSS). Part 12. Survival craft portable two-way VHF radiotelephone apparatus. Operational and performance requirement
DC95/706279 DC95/706279. Transportable gas cylinders. Cylinders for permanent gases. Inspection at time of filling (prEN 1920)
DC95/521023 DC95/521023. BS 7755. Soil quality. New section. Determination of polynuclear aromatic hydrocarbons. Method using high-performance liquid chromatography (ISO/DIS 13877)
DC95/561350 DC95/561350. BS 6935:Part 14. Wheelchair tests. Specification for power and control systems for electric wheelchairs (ISO/DIS 7176-14)
BS EN ISP 10608-1:1995, ISO/IEC ISP 10608-1:1992 BS EN ISP 10608-1:1995, ISO/IEC ISP 10608-1:1992. Information technology. International standardized profile TAnnnn. Connection-mode transport service
BS EN ISP 10608-2:1995, ISO/IEC ISP 10608-2:1992 BS EN ISP 10608-2:1995, ISO/IEC ISP 10608-2:1992. Information technology. International standardized profile TAnnnn. Connection-mode transport service
BS EN ISO/IEC 7501-1:1995 BS EN ISO/IEC 7501-1:1995. Identification cards. Machine readable travel documents. Machine readable passport
BS ISO/IEC ISP 11185-13:1995 BS ISO/IEC ISP 11185-13:1995. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions
BS ISO/IEC ISP 11185-12:1995 BS ISO/IEC ISP 11185-12:1995. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions
BS EN ISO 6251:1995, BS 2000:Part 411:1995,ISO 6251:1982 BS EN ISO 6251:1995, BS 2000:Part 411:1995,ISO 6251:1982. Liquefied petroleum gases. Corrosiveness to copper. Copper strip test
BS EN ISO 4256:1995, BS 2000:Part 410:1995,ISO 4256:1978 BS EN ISO 4256:1995, BS 2000:Part 410:1995,ISO 4256:1978. Methods of test for petroleum and its products. Liquefied petroleum gases. Determinat
BS EN ISO 8819:1995, BS 2000-401:1995,ISO 8819:1993 BS EN ISO 8819:1995, BS 2000-401:1995,ISO 8819:1993. Methods of test for petroleum and its products. Liquefied petroleum gases. Detection of hydroge
BS EN ISO 8754:1995, BS 2000-336:1995,ISO 8754:1992 BS EN ISO 8754:1995, BS 2000-336:1995,ISO 8754:1992. Methods of test for petroleum and its products. Petroleum products. Determination of sulfur con
BS 7737-2:1995, IEC 60377-2:1977 BS 7737-2:1995, IEC 60377-2:1977. Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Resonanc
BS 4F 123:1996 BS 4F 123:1996. Woven nylon narrow fabrics for aerospace purposes (nominally 235 dtex yarns)
BS EN 2648:1995 BS EN 2648:1995. Washers, concave, in alloy steel, cadmium plated
BS EN 2647:1995 BS EN 2647:1995. Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 900 MPa (at ambient temperature)/235°C
BS AU 259:1995, ISO 12667:1993 BS AU 259:1995, ISO 12667:1993. Specification for components for commercial vehicles and buses. Cross-tooth propeller shaft flanges, type T
BS AU 50-1.6.3a:1995, ISO 6054-1:1994 BS AU 50-1.6.3a:1995, ISO 6054-1:1994. Tyres and wheels. Tyres. Motorcycle tyres. Specifications for designations, dimensions and load ratings for code designated
BS AU 50-4.6.2a:1995 BS AU 50-4.6.2a:1995. Tyres and wheels. Rim profiles and dimensions. Motorcycle rims. Specification for metric series 100, 90, 80, 70, 60, 55 and 50 rims
BS EN 168:1995 BS EN 168:1995. Personal eye protection. Non-optical test methods
BS EN 60601-2-30:1995, BS 5724-2.130:1995,IEC 60601-2-30:1995 BS EN 60601-2-30:1995, BS 5724-2.130:1995,IEC 60601-2-30:1995. Medical electrical equipment. Particular requirements for safety. Specifica
BS ISO 11416:1995 BS ISO 11416:1995. Tennis rackets. Racket components and physical parameters
BS 7755-3.11:1995, ISO 11048:1995 BS 7755-3.11:1995, ISO 11048:1995. Soil quality. Chemical methods. Determination of water-soluble and acid-soluble sulfate
BS ISO 3897:1992 BS ISO 3897:1992. Photography. Processed photographic plates. Storage practices
BS 5760-17:1995, IEC 61164:1995 BS 5760-17:1995, IEC 61164:1995. Reliability of systems, equipment and components. Reliability growth. Statistical test and estimation methods
BS EN 2649:1995 BS EN 2649:1995. Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235°C
BS EN 2424:1995 BS EN 2424:1995. Marking of aerospace products
BS 8103-1:1995 BS 8103-1:1995. Structural design of low-rise buildings. Code of practice for stability, site investigation, foundations and ground floor slabs for housing
DC95/709506 DC95/709506. Non-destructive examination of welds. General rules (prEN 12062)
DC95/501724 DC95/501724. Protective clothing. Electrostatic properties. Part 2. Vertical resistance (Test method) (prEN 1149-2)
DC95/122652 DC95/122652. Geotextiles and geotextile-related products. Determination of waterpermeability characteristics normal to the plane, without load (prEN 12040; ISO/DIS 11058)
DC95/124139 DC95/124139. Plastics. Thermosetting moulding compounds. Determination of compression moulding shrinkage (prEN 1842)
DD 219-2:1995 DD 219-2:1995. Electronic funds transfer at point of sale (EFT- POS). Conceptual framework. Guide to EFT-POS system description
BS EN 611-1:1996 BS EN 611-1:1996. Tin and tin alloys. Pewter and pewterware. Pewter
DC95/123449 DC95/123449. Plastics. Determination of burning behaviour by oxygen index. Part 1. Guidance (ISO/DIS 4589-1)
BS EN 60094-2:1996, BS 6288-2:1995,IEC 60094-2:1994 BS EN 60094-2:1996, BS 6288-2:1995,IEC 60094-2:1994. Magnetic tape sound recording and reproducing systems. Calibration tapes
BS EN 60835-3-7:1996, BS 7573-3.7:1995,IEC 60835-3-7:1995 BS EN 60835-3-7:1996, BS 7573-3.7:1995,IEC 60835-3-7:1995. Methods of measurement for equipment used in digital microwave radio transmission s
BS EN 60835-3-9:1995, BS 7573-3.9:1995,IEC 60835-3-9:1993 BS EN 60835-3-9:1995, BS 7573-3.9:1995,IEC 60835-3-9:1993. Methods of measurement for equipment used in digital microwave radio transmission s
BS EN 60068-2-62:1996, IEC 60068-2-62:1991 BS EN 60068-2-62:1996, IEC 60068-2-62:1991. Environmental testing. Test methods. Test Ef. Impact, pendulum hammer
BS 6581:1995 BS 6581:1995. Common clauses for high-voltage switchgear and controlgear standards
DC95/106013 DC95/106013. Execution of special geotechnical work. Sheet pile walls (prEN 12063)
DC95/209853 DC95/209853. Basic safety publication IEC 1140. Protection against electric shock. Common aspects for installation and equipment (IEC Document 64/808/CDV)
BS 598-111:1995 BS 598-111:1995. Sampling and examination of bituminous mixtures for roads and other paved areas. Method for determination of resistance to permanent deformation of bituminous mixtures
WD/BS5975 : 1996 (TEXT) WD/BS5975 : 1996 (TEXT). Code of practice for falsework
DC95/711345 DC95/711345. Installations and equipment for liquefied natural gas. Suitability testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing
DC95/711344 DC95/711344. Installations and equipment for liquefied natural gas. Testing of insulating linings for liquefied natural gas retention bunds (prEN 12066)
DC95/711395 DC95/711395. IEC 974-1. Arc welding equipment. Part 1. Welding power sources
BS ISO/IEC 11575:1995 BS ISO/IEC 11575:1995. Information technology. Telecommunications and information exchange between systems. Protocol mappings for the OSI data link service
BS ISO/IEC 7776:1995 BS ISO/IEC 7776:1995. Information technology. Telecommunications and information exchange between systems. High-level data link control procedures. Description of the X.25 LAPB-co
DC95/209922 DC95/209922. prHD 629.2 S1. Test requirements on accessories of use on power cables of rated voltage from 3,6/6 (7,2) kV up to 20,8/36 (42) kV. Part 2. Cables with impregnated paper insula
DC95/209824 DC95/209824. IEC 1754-6. Fibre optic connector interfaces. Part 6. Type MU connector family (86B/672/CDV)
DC95/502050 DC95/502050. Ergonomic requirements for office work with visual display terminals (VDTs). Part 1. General (ISO/DIS 9241-1 rev.)
BS EN 61325:1996, IEC 61325:1995 BS EN 61325:1996, IEC 61325:1995. Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic or glass insulator units for d.c systems. Definitions, tes
BS EN 122001:1995 BS EN 122001:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency connectors (Type MIL-C-39012)
BS EN 122003:1995 BS EN 122003:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification for the preparation of customer detail specificatio
BS EN 122002:1995 BS EN 122002:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency coaxial connectors
BS EN 186210:1996 BS EN 186210:1996. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type CF08
BS EN 61305-3:1995, IEC 61305-3:1995 BS EN 61305-3:1995, IEC 61305-3:1995. Household high-fidelity audio equipment and systems. Methods of measuring and specifying the performance. Amplifiers
BS EN 61305-1:1995, IEC 61305-1:1995 BS EN 61305-1:1995, IEC 61305-1:1995. Household high-fidelity audio equipment and systems. Methods of measuring and specifying the performance. General
BS EN 60371-1:1995, IEC 60371-1:1980 BS EN 60371-1:1995, IEC 60371-1:1980. Specification for insulating materials based on mica. Definitions and general requirements
BS EN 60371-3-1:1995, IEC 60371-3-1:1984 BS EN 60371-3-1:1995, IEC 60371-3-1:1984. Specification for insulating materials based on mica. Specifications for individual materials. Commutator separators
BS EN 60371-3-2:1995, IEC 60371-3-2:1991 BS EN 60371-3-2:1995, IEC 60371-3-2:1991. Specification for insulating materials based on mica. Specifications for individual materials. Mica paper
BS EN 60371-3-3:1995, IEC 60371-3-3:1983 BS EN 60371-3-3:1995, IEC 60371-3-3:1983. Specification for insulating materials based on mica. Specifications for individual materials. Specification for rigi
BS ISO 4606:1995 BS ISO 4606:1995. Textile glass. Woven fabric. Determination of tensile breaking force and elongation at break by the strip method
BS EN 2545-1:1995 BS EN 2545-1:1995. Titanium and titanium alloy remelting stock and castings. Technical specification. General requirements
DC95/541870 DC95/541870. prEN 12064. Board. Specification of solid and corrugated fibreboard for packaging purposes
DC95/502081 DC95/502081. BS 4401. Methods of test for meat and meat products. Part 14. Determination of L-(+)- glutamic acid content (reference method) (revision of BS 4401:Part 14:1979) (ISO/DIS 4134
BS 3900-F15:1995, ISO 11503:1995 BS 3900-F15:1995, ISO 11503:1995. Methods of test for paints. Determination of resistance to humidity (intermittent condensation)
BS 5790-1:1996, ISO 7617-1:1994 BS 5790-1:1996, ISO 7617-1:1994. Coated fabrics for upholstery. Specification for PVC-coated knitted fabrics
BS 2782:Part 9:Method 911:1995, ISO 10724:1994 BS 2782:Part 9:Method 911:1995, ISO 10724:1994. Methods of testing plastics. Sampling and test specimen preparation. Injection moulding of multipurpose t
DC95/124391 DC95/124391. ISO/DIS 13761. Plastics pipes and fittings. Pressure reduction factors for polyethylene pipeline systems for use at tempertures above 20°C
BS ISO 6686:1995 BS ISO 6686:1995. Equipment for crop protection. Anti-drip devices. Determination of performance
BS 7837:1996 BS 7837:1996. Specification for flammability performance for textiles used in the construction of marquees and similar textile structures
BS ISO 12044:1995 BS ISO 12044:1995. Rolling bearings. Single-row angular contact ball bearings. Chamfer dimensions for outer ring non-thrust side
BS ISO 12043:1995 BS ISO 12043:1995. Rolling bearings. Single-row cylindrical roller bearings. Chamfer dimensions for loose rib and non-rib sides
BS ISO 11786:1995 BS ISO 11786:1995. Agricultural tractors and machinery. Tractor mounted sensor interface. Specification
DC95/210408 DC95/210408. Methods of measurement for equipment used in digital microwave radio transmission systems. Part 2. Measurements on terrestrial radio-relay systems. Section 11. Cross-polarizat
DC95/210319 DC95/210319. IEC 1760. Guidance document. Standard method for the specification for surface mounting components (SMDs) of assessed quality [IEC document 91/89/CDV]
DC95/209994 DC95/209994. IEC 1000-3-6. Electromagnetic compatibility (EMC). Part 3. Limits Section 6. Limitation of emission of harmonic currents for equipment connected to medium and high voltage pow
DC95/209992 DC95/209992. IEC 1000-2-7. Electromagnetic compatibility (EMC). Part 2. Environment. Section 7. Low frequency magnetic fields in various environment. Technical report type III (77A/134/CDV
WD/HB10011 : 1995 WD/HB10011 : 1995. A Handbook on the requirements for Electrical Installations; IEE Wiring Regulations, 16th Edition
WD/HB10012 : 1995 WD/HB10012 : 1995. The Building Regulations Explained & Illustrated. 10th Edn.
BS ISO 464:1995 BS ISO 464:1995. Rolling bearings. Radial bearings with locating snap ring. Dimensions and tolerances
BS ISO 246:1995 BS ISO 246:1995. Rolling bearings. Cylindrical roller bearings, separate thrust collars. Boundary dimensions
BS ISO 582:1995 BS ISO 582:1995. Rolling bearings. Chamfer dimensions. Maximum values
DC95/711016 DC95/711016. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motor cycles. Part 1:Definitions, symbols and general considerati
DC95/711017 DC95/711017. ISO/DIS 13232-2. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motor cycles. Part 2. Definition of impact condi
DC95/711018 DC95/711018. ISO/DIS 13232-3 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motor cycles. Part 3. Requirements for a motor cy
DC95/711019 DC95/711019. ISO/DIS 13232-4. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motor cycles. Part 4. Variables to be measured,
DC95/711020 DC95/711020. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motor cycles. Part 5. Injury indices and risk/benefit analysis (I
DC95/711021 DC95/711021. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motor cycles. Part 6. Full scale impact test procedures (ISO/DIS
DC95/711022 DC95/711022. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motor cycles. Part 7. Standardized procedures for performing comp
DC95/711023 DC95/711023. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motor cycles. Part 8. Documentation and reports (ISO/DIS 13232-8)
BS 1660-12:1996, ISO 5413:1993 BS 1660-12:1996, ISO 5413:1993. Machine tapers. Specification for positive drive of Morse tapers
BS 7403-9:1995, ISO 4548-9:1995 BS 7403-9:1995, ISO 4548-9:1995. Full-flow lubricating oil filters for internal combustion engines. Method of test for inlet and outlet anti-drain valves
BS 1660-5:1996, ISO 3936:1993 BS 1660-5:1996, ISO 3936:1993. Machine tapers. Specification for reduction sleeves with external and internal 7/24 tapers
BS EN 277:1996 BS EN 277:1996. Sacks for the transport of food aid. Sacks made of woven polypropylene fabric
BS EN 1086:1996 BS EN 1086:1996. Sacks for the transport of food aid. Recommendations on the selection of type of sack and the liner in relation to the product to be packed
BS ISO/IEC 8208:1995 BS ISO/IEC 8208:1995. Information technology. Data communications. X.25 Packet Layer Protocol for Data Terminal Equipment
BS 2782-4:Method 453C:1996, ISO 4581:1994 BS 2782-4:Method 453C:1996, ISO 4581:1994. Methods of testing plastics. Chemical properties. Determination of residual acrylonitrile monomer content in styren
BS EN 10002-4:1995 BS EN 10002-4:1995. Tensile testing of metallic materials. Verification of extensometers used in uniaxial testing
BS EN 10109-1:1996 BS EN 10109-1:1996. Metallic materials. Hardness test. Rockwell test (scales A, B, C, D, E, F, G, H, K) and Rockwell superficial test (scales 15 N, 30 N, 45 N, 15 T, 30 T and 45 T)
BS EN 10109-2:1996 BS EN 10109-2:1996. Metallic materials. Hardness test. Verification of Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN 10109-3:1996 BS EN 10109-3:1996. Metallic materials. Hardness test. Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN 2545-3:1995 BS EN 2545-3:1995. Titanium and titanium alloy remelting stock and castings. Technical specification. Pre-production and production castings
BS EN 61187:1996 BS EN 61187:1996. Electrical and electronic measuring equipment. Documentation
BS EN ISO 8620:1996, BS 2782-4:Method 451S:1996 BS EN ISO 8620:1996, BS 2782-4:Method 451S:1996. Plastics. Phenolic resin powder. Sieve analysis using air-jet sieve apparatus
BS 7723-4:1995, ISO 7507-4:1995 BS 7723-4:1995, ISO 7507-4:1995. Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products. Internal electro-optical distance-ra
BS EN ISO 8799:1996 BS EN ISO 8799:1996. Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulfates. Method for determination of unsulfated matter content
BS EN ISO 9396:1996, BS 2782-8:Methods 835F & G BS EN ISO 9396:1996, BS 2782-8:Methods 835F & G. Plastics. Phenolic resins. Determination of the gel time at a given temperature using automatic app
BS EN ISO 787-19:1995, BS 3483-C9:1995 BS EN ISO 787-19:1995, BS 3483-C9:1995. General methods of test for pigments and extenders. Determination of water-soluble nitrates (Salicylic acid method)
BS EN ISO 787-18:1995 BS EN ISO 787-18:1995. General methods of test for pigments and extenders. Determination of residue on sieve. Mechanical flushing procedure
BS EN 2545-2:1995 BS EN 2545-2:1995. Titanium and titanium alloy remeling stock and castings. Technical specification. Remelting stock
BS EN ISO 3175:1996 BS EN ISO 3175:1996. Textiles. Evaluation of stability to machine dry-cleaning
BS ISO 10013:1995 BS ISO 10013:1995. Guidelines for developing quality manuals
BS EN ISO 3675:1996 BS EN ISO 3675:1996. Crude petroleum and liquid petroleum products. Laboratory determination of density or relative density. Hydrometer method
WD/DC95/644888 WD/DC95/644888. British Standard implementation of ISO/IEC ISP 12071-4. Information technology. International standardized profile FCG-APV. Computer graphics metafile interchange format
DC95/712078 DC95/712078. ISO/DIS 11118. Non-refillable metallic gas cylinders in sizes up to 5 litres. Specification and test methods
DC95/210765 DC95/210765. Methods of measurement on receivers for television broadcast transmissions. Part 7. Electrical measurements of HDTV displays (IEC/12A/420/CDV)
DC95/210764 DC95/210764. Methods of measurement on receivers for television broadcast transmissions. Part 2. Electrical measurements on audio channels, methods in general and those for monophonic chan
DC95/562164 DC95/562164. BS ISO 11979. Intraocular lenses. Part 5. Biocompatibility. Requirements and test methods (ISO/DIS 11979)(prEN 31979-5). Part 5: Biocompatibility
BS 7720:1995 BS 7720:1995. Specification for non-biological sterilization indicators equivalent to the Bowie and Dick test
BS EN 288-8:1995 BS EN 288-8:1995. Specification and approval of welding procedures for metallic materials. Approval by a pre-production welding test
BS EN 288-7:1995 BS EN 288-7:1995. Specification and approval of welding procedures for metallic materials. Approval by a standard welding procedure for arc welding
BS ISO 6846:1992 BS ISO 6846:1992. Photography. Black and white continuous tone papers. Determination of ISO speed and ISO range for printing
BS ISO 7766-1:1993 BS ISO 7766-1:1993. Photography. Processing wastes. Analysis of cyanides. Determination of hexacyanoferrate(II) and hexacyanoferrate(III) by spectrometry
BS ISO 6051:1992 BS ISO 6051:1992. Photography. Processed photographic paper prints. Storage practices
BS ISO 5989:1995 BS ISO 5989:1995. Photography. Pre-packaged chemicals for the processing of silver halide based photographic materials. Vocabulary
BS ISO 9568:1993 BS ISO 9568:1993. Cinematography. Background acoustic noise levels in the theatres, review rooms and dubbing rooms
BS ISO 10348:1993 BS ISO 10348:1993. Photography. Processing wastes. Determination of silver content
BS EN ISO 10634:1996, BS 6068-5.18:1996 BS EN ISO 10634:1996, BS 6068-5.18:1996. Water quality. Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent
BS EN 61727:1996, IEC 61727:1995 BS EN 61727:1996, IEC 61727:1995. Photovoltaic (PV) systems. Characteristics of the utility interface
BS EN 60870-5-5:1996, IEC 60870-5-5:1995 BS EN 60870-5-5:1996, IEC 60870-5-5:1995. Telecontrol equipment and systems. Transmission protocols. Basic application functions
BS EN 61302:1996, IEC 61302:1995 BS EN 61302:1996, IEC 61302:1995. Electrical insulating materials. Method to evaluate the resistance to tracking and erosion. Rotating wheel dip test
BS EN 60721-1:1996, IEC 60721-1:1996 BS EN 60721-1:1996, IEC 60721-1:1996. Classification of environmental conditions. Environmental parameters and their severities
BS EN 50168:1996 BS EN 50168:1996. Sectional specification for work area wiring cables with a common overall screen for use in digital communication
BS EN 50169:1996 BS EN 50169:1996. Sectional specification for backbone cables, riser and campus, with a common overall screen for use in digital communication
BS EN 50167:1996 BS EN 50167:1996. Sectional specification for horizontal floor wiring cables with a common overall screen for use in digital communication
BS ISO/IEC 10021-9:1995 BS ISO/IEC 10021-9:1995. Information technology. Message handling systems (MHS). Electronic Data Interchange messaging system
DC95/711890 DC95/711890. Mechanical vibration. Declaration and verification of vibration emission values (prEN 12096)
DC95/210788 DC95/210788. IEC 1000-5-1. Electromagnetic compatibility (EMC). Part 5. Mitigation methods and installation guidelines. Section 1. General considerations. Technical report type II (77B/155
DC95/106292 DC95/106292. prEN 12056-3. Gravity drainage systems inside buildings. Part 3. Roof drainage, layout and calculation. Roof drainage, layout and calculation
DC95/711741 DC95/711741. Aerospace series. Air cargo equipment. Air/land pallet nets. (ISO/DIS 4115: 1995)
BS 7087-26:1996 BS 7087-26:1996. Herbs and spices ready for food use. Specification for dehydrated garlic
BS 7087-25:1996 BS 7087-25:1996. Herbs and spices ready for food use. Specification for dehydrated onion
BS 4585-18:1996 BS 4585-18:1996. Methods of test for spices and condiments. Determination of total capsaicinoid content of chillies and chilli oleoresins (high-performance liquid chromatographic metho
BS ISO/IEC 10745:1995 BS ISO/IEC 10745:1995. Information technology. Open systems interconnection. Upper layers security model
BS EN ISO 3993:1996 BS EN ISO 3993:1996. Liquefied petroleum gas and light hydrocarbons. Determination of density or relative density. Pressure hydrometer method
BS 7087-24:1996 BS 7087-24:1996. Herbs and spices ready for food use. Specification for dried pimento (allspice) (whole and ground)
BS EN ISO 9944:1995, BS 2782-4:Method 451Q:1995 BS EN ISO 9944:1995, BS 2782-4:Method 451Q:1995. Plastics. Phenolic resins. Determination of electrical conductivity of resin extracts
BS ISO 1189:1986 BS ISO 1189:1986. Cinematography. Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints. Specifications
BS ISO 1785:1983 BS ISO 1785:1983. Cinematography. Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type S (1-4). Position and dimensions
BS ISO 1787:1984 BS ISO 1787:1984. Cinematography. Camera usage of 8 mm Type S motion-picture film. Specifications
BS ISO 1700:1988 BS ISO 1700:1988. Cinematography. 8 mm type S motion-picture raw stock film. Cutting and perforating dimensions
BS ISO 2939:1986 BS ISO 2939:1986. Cinematography. Picture image area and photographic sound record on 35 mm motion-picture release prints. Positions and dimensions
BS ISO 2966:1988 BS ISO 2966:1988. Cinematography. 16 mm motion-picture film perforated 8 mm type S [1-3] and [1-4]. Cutting and perforating dimensions
BS ISO 1781:1983 BS ISO 1781:1983. Cinematography. Projector usage of 8 mm type S motion-picture film for direct front projection
DC95/210491 DC95/210491. Methods of measurement for equipment used in digital microwave radio transmission systems. Part 3. Measurements on satellite earth stations. Section 14. Earth stations for sat
BS EN 911:1996, BS 2782-11:Method 1123W:1996 BS EN 911:1996, BS 2782-11:Method 1123W:1996. Plastics piping systems. Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressu
BS EN 60672-1:1996, IEC 60672-1:1995 BS EN 60672-1:1996, IEC 60672-1:1995. Ceramic and glass insulating materials. Definitions and classification
BS EN 60641-1:1996, IEC 60641-1:1979 BS EN 60641-1:1996, IEC 60641-1:1979. Specification for pressboard and presspaper for electrical purposes. Definitions and general requirements
BS EN 895:1995 BS EN 895:1995. Destructive tests on welds in metallic materials. Transverse tensile test
BS ISO/IEC 10021-8:1995 BS ISO/IEC 10021-8:1995. Information technology. Message handling systems (MHS). Electronic Data Interchange messaging service
BS EN 60622:1996 BS EN 60622:1996. Sealed nickel-cadmium prismatic rechargeable single cells
BS EN 60371-3-5:1996, IEC 60371-3-5:1992 BS EN 60371-3-5:1996, IEC 60371-3-5:1992. Specification for insulating materials based on mica. Specifications for individual materials. Glass-backed mica pape
BS EN 1575:1996 BS EN 1575:1996. EDI. Message. Bayplan/stowage plan total numbers message (BAPLTE)
BS EN 1582:1996 BS EN 1582:1996. EDI. Message. Booking confirmation message (IFTMBC)
BS EN 1587:1996 BS EN 1587:1996. EDI. Message. Payroll deductions advice message (PAYDUC)
BS EN 1585:1996 BS EN 1585:1996. EDI. Message. Instruction contract status message (IFTMCS)
BS EN 1580:1996 BS EN 1580:1996. EDI. Message. Forwarding and consolidation summary message (IFCSUM)
BS EN 705:1995, BS 2782-12:Methods 1220A to C BS EN 705:1995, BS 2782-12:Methods 1220A to C. Plastics piping systems. Glass-reinforced thermosetting (GRP) pipes and fittings. Methods for regression an
DC95/711963 DC95/711963. Agricultural tractors and machines. Engine test code. Net power (ISO/DIS 2288)
DC95/711782 DC95/711782. Hexagon socket head cap screws (revision of ISO 4762:1989)
DC95/711289 DC95/711289. Steel and iron. Determination of nitrogencontent. Thermal conductimetric method after fusion in a current of inert gas (ISO/DIS 10720)
DC95/562352 DC95/562352. BS 6935:Part 16 Wheelchair tests. Part 16. Specification for resistance to ignition of upholstered parts (ISO/DIS 7176-16)
DC95/542012 DC95/542012. Optics and optical instruments. Geodetic instruments. Field procedures for determining accuracy. Part 3. Electro-optical distance meters (EDM instruments) (ISO/DIS 12857-3). E
DC95/542011 DC95/542011. Optics and optical instruments. Geodetic instruments. Field procedures for determining accuracy. Part 2. Theodolites (ISO/DIS 12857-2). Theodolites
DC95/542010 DC95/542010. Optics and optical instruments. Geodetic instruments. Field procedures for determining accuracy. Part 1. Levels (ISO/DIS 12857-1). Levels
DC95/542004 DC95/542004. Packaging-unit load sizes-heights (ISO/CD 12820 Rev)
DC95/122674 DC95/122674. Textiles. Designations of yarns (ISO 1139:1973/DAM1)
BS EN 744:1996, BS 2782-11:Method 1108C:1996 BS EN 744:1996, BS 2782-11:Method 1108C:1996. Plastics piping and ducting systems. Thermoplastics pipes. Test method for resistance to external blows by th
BS EN 1581:1996 BS EN 1581:1996. EDI. Message. Arrival notice message (IFTMAN)
BS EN 1578:1996 BS EN 1578:1996. EDI. Message. Customs declaration message (CUSDEC)
BS EN 180101:1995 BS EN 180101:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed fibre optic attenuators
BS EN 134103:1995 BS EN 134103:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: vane type air dielectric capacitors (qualification
BS EN 134102:1995 BS EN 134102:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: multi turn concentric capacitors (qualification ap
BS EN 134101:1995 BS EN 134101:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: single turn disc trimmer capacitors (qualification
BS EN 134104:1995 BS EN 134104:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: compression type trimmer capacitors (qualification
BS EN 60835-2-6:1996, BS 7573-2.6:1995,IEC 60835-2-6:1995 BS EN 60835-2-6:1996, BS 7573-2.6:1995,IEC 60835-2-6:1995. Methods of measurement for equipment used in digital microwave radio transmission s
BS EN 2536:1995 BS EN 2536:1995. Hard anodizing of aluminium alloys
DC95/502195 DC95/502195. BS 4317. Methods of test for cereals and pulses. Part 17. Determination of fat acidity (ISO/DIS 7305)
DC95/712522 DC95/712522. Metallic powders. Determination of oxygen content by reduction methods. Part 3. Hydrogen-reducible oxygen (ISO/DIS 4491-3)
DC95/124473 DC95/124473. BS EN 61010-2-042. Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-042. Particular requirements for autoclaves and sterilizer
BS ISO/IEC ISP 11185-16:1995 BS ISO/IEC ISP 11185-16:1995. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions
BS ISO/IEC ISP 11185-17:1995 BS ISO/IEC ISP 11185-17:1995. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions
BS ISO/IEC ISP 11185-15:1995 BS ISO/IEC ISP 11185-15:1995. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions
BS EN ISO 1873-1:1995 BS EN ISO 1873-1:1995. Plastics. Polypropylene (PP) moulding and extrusion materials. Designation system and basis for specifications
DC95/211862 DC95/211862. Amendment to BS 1363:1995. Part 1. Specification for rewirable and non-rewirable 13A fused plugs. Specification for rewirable and non-rewirable 13A fused plugs
DC95/124673 DC95/124673. Resilient floor coverings. Determination of moisture content of composition cork (prEN 12105)
DC95/106817 DC95/106817. prEN 12090. Thermal insulating products for building applications. Determination of shear behaviour
DC95/106818 DC95/106818. prEN 12088. Thermal insulating products for building applications. Determination of long term water absorption by diffusion
DC95/106820 DC95/106820. prEN 12091. Thermal insulating products for building applications. Determination of freeze-thaw resistance
DC95/106819 DC95/106819. prEN 12086. Thermal insulating products for building applications. Determination of water vapour transmission properties
DC95/106821 DC95/106821. prEN 12087. Thermal insulating products for building applications. Determination of long term water absorption by immersion.
DC95/106816 DC95/106816. prEN 12089. Thermal insulating products for building applications. Determination of bending behaviour
DC95/106815 DC95/106815. prEN 12085. Thermal insulating products for building applications. Determination of linear dimensions of test specimens
BS EN 180000:1996 BS EN 180000:1996. Harmonized system of quality assessment for electronic components. Generic specification: Fibre optic attenuators
BS EN 61360-1:1996, IEC 61360-1:1995 BS EN 61360-1:1996, IEC 61360-1:1995. Standard data element types with associated classification scheme for electric components. Definitions. Principles and method
BS EN 190000:1996 BS EN 190000:1996. Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
PD 0006:1995 PD 0006:1995. Technical guide to JPEG. Digital compression of photographic images
BS 2M 72:1996, ISO 8097:1995 BS 2M 72:1996, ISO 8097:1995. Air cargo equipment. Minimum airworthiness requirements and test conditions for certified air cargo unit load devices
BS EN 61212-3-1:1996 BS EN 61212-3-1:1996. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminat
BS EN 607:1996 BS EN 607:1996. Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
BS 853-2:1996 BS 853-2:1996. Specification for vessels for use in heating systems. Tubular heat exchangers and storage vessels for building and industrial services
BS ISO 11787:1995 BS ISO 11787:1995. Machinery for agriculture and forestry. Data interchange between management computer and process computers. Data interchange syntax
BS ISO 10792-3:1995 BS ISO 10792-3:1995. Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner. Technical specification
BS ISO 10792-1:1995 BS ISO 10792-1:1995. Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner. Metric series
BS ISO 10792-2:1995 BS ISO 10792-2:1995. Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner. Inch series
BS EN 875:1995 BS EN 875:1995. Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination
BS EN 876:1995 BS EN 876:1995. Destructive tests on welds in metallic materials. Longitudinal tensile test on weld metal in fusion welded joints
BS EN 1179:1996 BS EN 1179:1996. Specification for zinc and zinc alloys. Primary zinc
BS ISO 10653:1993 BS ISO 10653:1993. Light-gauge metal containers. Round open-top cans. Cans defined by their nominal gross lidded capacities
BS ISO TR 11762:1992 BS ISO TR 11762:1992. Light-gauge metal containers. Round open-top cans for liquid products with added gas. Classification of can sizes by construction type
BS ISO TR 8610:1984 BS ISO TR 8610:1984. Light gauge metal containers. Round vent-hole cans with soldered ends for milk and milk products. Capacities and related diameters
BS ISO TR 11776:1992 BS ISO TR 11776:1992. Light gauge metal containers. Non-round open-top cans. Cans defined by their nominal capacities
BS EN ISO 10700:1995 BS EN ISO 10700:1995. Steel and iron. Determination of manganese content. Flame atomic absorption spectrometric method
BS EN 2907:1996 BS EN 2907:1996. Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1 100 MPa (at ambient temperature)/650°C
BS EN 3012:1996 BS EN 3012:1996. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730°C
BS EN 3013:1996 BS EN 3013:1996. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification: 1210 MPa (at ambient temperature)/730°C
BS EN 3239:1996 BS EN 3239:1996. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread. Classification: 1210 MPa (at ambient temperature)/730°
DC95/502316 DC95/502316. Respiratory protective devices. Nomenclature of components (prEN 134)
DC95/106932 DC95/106932. BS 6911. Testing earth-moving machinery. New part. Measurement of turning dimensions of wheeled machines [ISO 7457]
DC95/211414 DC95/211414. IEC 1754-1. Edition 1. Fibre optic connector interfaces. Part 1. General and guidance (86B/667/CDV)
DC95/211417 DC95/211417. IEC 1754-4. Edition 1. Fibre optic connector interfaces. Part 4. Type SC connector family (86B/670/CDV)
DC95/502200 DC95/502200. Methods for chemical analysis of tobacco and tobacco products. New Part: Determination of vapour-phase nicotine in air (gas-chromatographic method)
BS EN 1014-4:1996 BS EN 1014-4:1996. Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Determination of the water extractable phenols content of creosote
BS EN 61212-1:1996 BS EN 61212-1:1996. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. General requirements
BS EN 116502:1995 BS EN 116502:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical all-or-nothing TELECOM relays of
CSM I:1996 CSM I:1996. Construction standards manual. Index
CSM CS:1996 CSM CS:1996. Construction standards manual. Common standards
BS EN 351-2:1996 BS EN 351-2:1996. Durability of wood and wood-based products. Preservative-treated solid wood. Guidance on sampling for the analysis of preservative-treated wood
BS EN 351-1:1996 BS EN 351-1:1996. Durability of wood and wood-based products. Preservative-treated solid wood. Classification of preservative penetration and retention
BS ISO TR 10193:1989 BS ISO TR 10193:1989. Round general use light gauge metal containers. Nominal filling volumes and nominal diameters
BS ISO TR 11761:1992 BS ISO TR 11761:1992. Light-gauge metal containers. Round open-top cans. Classification of can sizes by construction type
BS ISO TR 10194:1989 BS ISO TR 10194:1989. Non-round general use light gauge metal containers. Nominal filling volumes and nominal cross-sections
BS 5752-16:1996, ISO 6669:1995 BS 5752-16:1996, ISO 6669:1995. Methods of test for coffee and coffee products. Green and roasted coffee. Determination of free-flow bulk density of whole beans (routine
BS EN 2259:1995 BS EN 2259:1995. Silicone rubber (VMQ). Hardness 50 IRHD
BS EN 2260:1995 BS EN 2260:1995. Silicone rubber (VMQ). Hardness 60 IRHD
BS EN 2261:1995 BS EN 2261:1995. Silicone rubber (VMQ). Hardness 70 IRHD
BS EN 2262:1995 BS EN 2262:1995. Silicone rubber (VMQ/PVMQ) with high tear strength. Hardness 50 IRHD
DC95/122707 DC95/122707. ISO/DIS 12640. Graphic technology. Digital prepress data exchange. Standard colour image data (SCID)
DC95/122512 DC95/122512. Plastics. Injection moulding of test specimens of thermoplastic materials. Part 2. Small tensile bars (ISO type C mould) (ISO/DIS 294-2)
DC95/122514 DC95/122514. Plastics. Injection moulding of test specimens of thermoplastic materials. Part 4. Determination of moulding shrinkage (ISO/DIS 294-4)
DC95/122511 DC95/122511. Plastics. Injection moulding of test specimens of thermoplastics materials. Part 1. General principles and multipurpose test specimens (ISO type A mould) and bars (ISO type B
DC95/122513 DC95/122513. Plastics. Injection moulding of test specimens of thermoplastic materials. Part 3. Plates (ISO type D moulds) (ISO/DIS 294-3)
DC95/521022 DC95/521022. ISO/DIS 14255. Soil quality. Determination of soluble nitrogen fractions
DC95/125025 DC95/125025. Resilient floor coverings. Determination of wear resistance. Part 2. Frick-Taber test (prEN 660-2). Part 2 : Frick- Taber test
DC95/124976 DC95/124976. ISO/DIS 10931-4. Plastics piping systems for industrial applications. Poly(vinylidene fluoride) (PVDF). Part 4. Valves
DC95/124708 DC95/124708. Textiles. Fabrics. Determination of mass per unit area using small samples (prEN 12127)
DC95/124977 DC95/124977. ISO/DIS 9393-2. Thermoplastic valves. Pressure test methods abd requirements. Part 2. Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves [Potentially BS
DC95/106572 DC95/106572. prEN 33. Pedestal W.C. pan with close coupled cistern. Connecting dimensions
BS EN 116500:1996 BS EN 116500:1996. Harmonized system of quality assessment for electronic components. Sectional specification: electromechanical all-or-nothing TELECOM relays of assessed quality
BS EN 863:1996 BS EN 863:1996. Protective clothing. Mechanical properties. Test method: puncture resistance
BS 4F 124:1996 BS 4F 124:1996. Specification for woven nylon 6.6 narrow fabrics for aerospace purposes (nominally 940 dtex yarns)
BS EN 2378:1994 BS EN 2378:1994. Fibre reinforced plastics. Determination of water absorption by immersion
BS EN ISO 11111:1996 BS EN ISO 11111:1996. Safety requirements for textile machinery
BS ISO/IEC 10918-2:1995 BS ISO/IEC 10918-2:1995. Information technology. Digital compression and coding of continuous-tone still images. Compliance testing
BS EN 61197:1996, IEC 61197:1993 BS EN 61197:1996, IEC 61197:1993. Insulating liquids. Linear flame propagation. Test method using a glass-fibre tape
BS EN 31252:1996, ISO 11252:1993 BS EN 31252:1996, ISO 11252:1993. Lasers and laser related equipment. Laser device. Minimum requirements for documentation
BS EN 31253:1996, ISO 11253 BS EN 31253:1996, ISO 11253. Lasers and laser-related equipment. Laser device. Mechanical interfaces
BS 3680-8H:1996, ISO 11655:1995 BS 3680-8H:1996, ISO 11655:1995. Measurement of liquid flow in open channels. Measuring instruments and equipment. Method of specifying the performance of hydrometric e
DC95/212412 DC95/212412. IEC 1319-2. Interconnections of satellite receiving equipment. Part 2. Japan (84/437/CDV)
DC95/645521 DC95/645521. Implementation of ISO/IEC DTR 13818-5. Information technology. Generic coding of moving pictures and associated audio information. Part 5. Software simulation
DC95/125175 DC95/125175. Graphic technology. Multilingual terminology of printing arts. Part 2. Screen printing terms (ISO/DIS 12637-2)
DC95/712381 DC95/712381. Specification for installations of low pressure gas pipework of up to 28mm (R1) in domestic premises (2nd family gas)
DC95/713067 DC95/713067. Specification for installation of domestic sized gas meters (2nd and 3rd family gases)
DC95/714416 DC95/714416. prEN 7001 Aerospace series. Process standards. Rules for the drafting and presentation of surface treatment process standards
DC95/714417 DC95/714417. prEN 7000-1. Aerospace series. Non-metallic materials. Rules for the drafting and presentation of material standards. Part 1:General rules
BS 5502-11:1996 BS 5502-11:1996. Buildings and structures for agriculture. Guide to regulations and sources of information
BS EN 2561:1995 BS EN 2561:1995. Carbon fibre reinforced plastics. Undirectional laminates. Tensile test parallel to the fibre direction
BS EN 2432:1995 BS EN 2432:1995. Ethylene-propylene rubber (EPM/EPDM). Hardness 90 IRHD
BS EN 2431:1995 BS EN 2431:1995. Ethylene-propylene rubber (EPM/EPDM). Hardness 80 IRHD
BS EN 2430:1995 BS EN 2430:1995. Ethylene-propylene rubber (EPM/EPDM). Hardness 70 IRHD
BS EN 2429:1995 BS EN 2429:1995. Ethylene-propylene rubber (EPM/EPDM). Hardness 60 IRHD
BS EN 2428:1995 BS EN 2428:1995. Ethylene-propylene rubber (EPM/EPDM). Hardness 50 IRHD
BS 3905:1995 BS 3905:1995. Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines.
BS EN ISP 11185-2:1996 BS EN ISP 11185-2:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT213, FV
BS EN ISP 11185-1:1996 BS EN ISP 11185-1:1996. Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type definitions. FVT211, FV
BS 7755-3.12:1996, ISO 13536:1995 BS 7755-3.12:1996, ISO 13536:1995. Soil quality. Chemical methods. Determination of the potential cation exchange capacity and exchangeable cations using barium chlor
BS EN 61212-3-3:1996 BS EN 61212-3-3:1996. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminat
BS 3454:1995 BS 3454:1995. Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/1100 V, 300 A adaptors) for use in coal mines
BS EN 167:1995 BS EN 167:1995. Personal eye protection. Optical test methods
BS EN 990:1996 BS EN 990:1996. Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure
DD ENV 1965-1:1996 DD ENV 1965-1:1996. Structural adhesives. Corrosion. Determination and classification of corrosion to a copper substrate
BS EN 991:1996 BS EN 991:1996. Determination of the dimensions of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
DD ENV 1967:1996 DD ENV 1967:1996. Structural adhesives.Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller meth
BS ISO 2982-1:1995 BS ISO 2982-1:1995. Rolling bearings. Accessories. Tapered sleeves. Dimensions
BS ISO 2982-2:1995 BS ISO 2982-2:1995. Rolling bearings. Accessories. Locknuts and locking devices. Dimensions
BS EN ISO 9455-9:1996 BS EN ISO 9455-9:1996. Soft soldering fluxes. Test methods. Determination of ammonia content
BS EN ISO 9455-2:1996 BS EN ISO 9455-2:1996. Soft soldering fluxes. Test methods. Determination of non-volatile matter, ebulliometric method
BS EN 992:1996 BS EN 992:1996. Determination of the dry density of lightweight aggregate concrete with open structure
DD ENV 1965-2:1996 DD ENV 1965-2:1996. Structural adhesives. Corrosion. Determination and classification of corrosion to a brass substrate
DD ENV 1966:1996 DD ENV 1966:1996. Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
DC95/125461 DC95/125461. ISO/DIS 13967. Thermoplastics fittings. Determination of ring stiffness
DC95/125460 DC95/125460. prEN 12119. Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to thermal cycling
DC95/125458 DC95/125458. prEN 12099. Plastics piping systems. Polyethylene piping materials and components. Determination of volatile content
DC95/212102 DC95/212102. IEC 1300-3-9. Edition 1. Basic fibre optic test procedures. Part 3. Measurements (86B/703/CDV)
DC95/212101 DC95/212101. IEC 1300-3-6. Return loss. Basic fibre optic test procedures. Part 3. Measurements (86B/702/CDV)
DC95/212103 DC95/212103. IEC 1300-3-12. Edition 1. Polarization dependence of attenuation of a single mode fibre optic component. Matrix calculation method. Basic fibre optic test procedures. Part 3.
DC95/212104 DC95/212104. IEC 1300-3-19. Polarization dependence of return loss of a single-mode fibre optic component. Basic fibre optic test procedures. Part 3. Measurements (86B/705/CDV)
DC95/212105 DC95/212105. IEC 1300-3-22. Edition 1. Ferrule compression force. Basic fibre optic test procedures. Part 3. Measurements (86B/706/CDV)
DC95/212106 DC95/212106. IEC 1300-3-25. Edition 1. Concentricity of the ferrules and ferrules with fibre installed. Basic fibre optic test procedures. Part 3. Measurements (86B/707/CDV)
DC95/212107 DC95/212107. IEC 1300-3-26. Edition 1. Measurement of the angular misalignment of ferrules with fibre installed. Basic fibre optic test procedures. Part 3. Measurements (86B/708/CDV)
DC95/212108 DC95/212108. IEC 1300-3-27. Edition 1. Measurement method for the hole location of a multiway connector plug. Basic fibre optic test procedures. Part 3. Measurements (86B/709/CDV)
DC95/125456 DC95/125456. prEN 12108. Plastics piping systems. Recommended practice and techniques for the installation inside building structures of pressure piping systems for hot and cold water inte
DC95/125453 DC95/125453. ISO/DIS 8085-1. Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Part 1. Fittings for socket fusion using
BS EN ISO 12162:1996, BS 2782-11:Method 1121A:1996 BS EN ISO 12162:1996, BS 2782-11:Method 1121A:1996. Thermoplastics materials for pipes and fittings for pressure applications. Classification and des
DC95/125452 DC95/125452. ISO/DIS 8085-2. Polyethylene fittings for use with polyethene pipes for the supply of gaseous fuels. Metric series. Specifications. Part 2. Spigot fittings for butt fusion joi
DC95/125451 DC95/125451. ISO/DIS 8085-3. Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Part 3. Electrofusion fittings. Part 3 :
DC95/212098 DC95/212098. IEC 1300-2-14. Edition 1. Maximum input power. Basic fibre optic test procedures. Part 2. Tests (86B/699/CDV)
DC95/212099 DC95/212099. IEC 1300-2-39. Edition 1. Susceptibility to external magnetic fields. Basic fibre optic test procedures. Part 2. Tests (86B/700/CDV)
DC95/212100 DC95/212100. IEC 1300-3-3. Edition 1. Monitoring change in attenuation and in return loss (Multiple Paths). Basic fibre optic test procedures. Part 3. Measurements (86B/701/CDV)
DC95/502568 DC95/502568. Method for enzymatic determination of D-malic acid content of fruit and vegetable juices. NAD spectrometric method (prEN 12138)
DC95/502567 DC95/502567. Method for determination of tartaric acid in grape juices by high performance liquid chromatography (prEN 12137)
DC95/502566 DC95/502566. Method for determination of total carotenoid content and individual carotenoid fractions of fruit and vegetable juices (prEN 12136)
DC95/502565 DC95/502565. Method for determination of nitrogen content of fruit and vegetable juices. Kjeldahl method (prEN 12135)
DC95/502564 DC95/502564. Method for determination of pulp content of fruit and vegetable juices by centrifugation (prEN 12134)
DC95/502563 DC95/502563. Method for determination of chloride content of fruit and vegetable juices. Potentiometric titration method (prEN 12133)
DC95/125196 DC95/125196. Ceramic tile adhesives. Determination of transverse deformation for cementitious adhesives (pr EN 12002)
DC95/502536 DC95/502536. BS 5668. Routine analytical cigarette smoking machine. Part 2. Methods of non-routine evaluation (ISO/DIS 7210)
DC95/713956 DC95/713956. Machinery for agriculture and forestry. Data interchange between management computer and process computers. Part 1. General description of agricultural data dictionary (ISO/DI
BS ISO/IEC 8480:1995 BS ISO/IEC 8480:1995. Information technology. Telecommunications and information exchange between systems. DTE/DCE interface back-up control operation using ITU-T Recommendation V
DD ENV 197-2:1996 DD ENV 197-2:1996. Cement. Conformity evaluation
BS EN 2489:1995 BS EN 2489:1995. Fibre reinforced plastics. Determination of the action of test fluids
BS EN 3212:1995 BS EN 3212:1995. Paints and varnishes. Corrosion test by alternate immersion in a buffered sodium chloride solution
BS 903-A30:1996, ISO 2782:1995 BS 903-A30:1996, ISO 2782:1995. Physical testing of rubber. Determination of permeability to gases
BS 7562-3:1995 BS 7562-3:1995. Planning, design and installation of irrigation schemes. Guide to irrigation water requirements
BS EN 50148:1996 BS EN 50148:1996. Electronic taximeters
BS EN 61241-2-2:1996 BS EN 61241-2-2:1996. Electrical apparatus for use in the presence of combustible dust. Test methods. Method for determining the electrical resistivity of dust in layers
TS 1:1995 TS 1:1995. TickIT Guide
BS 684-0.1:1995 BS 684-0.1:1995. Methods of analysis of fats and fatty oils. General introduction. General procedures and list of determinations in BS 684
BS 684-1.2:1996, ISO 6320:1995 BS 684-1.2:1996, ISO 6320:1995. Methods of analysis of fats and fatty oils. Physical methods. Determination of refractive index
BS 7847:1996, ISO 4399:1995 BS 7847:1996, ISO 4399:1995. Fluid power systems and components. Connectors and associated components. Nominal pressures
BS 7848:1996, ISO 10825:1995 BS 7848:1996, ISO 10825:1995. Gears. Wear and damage to gear teeth. Terminology
DC95/125450 DC95/125450. ISO/DIS 13949. Method for the assessment of the degree of pigment dispersion in polyolefin pipes, fittings and compounds
DC95/106990 DC95/106990. prEN 12169. Criteria for acceptance of a batch of sawn timber
DC95/714534 DC95/714534. prEN 12167. Copper and copper alloys. Profiles and rectangular bar for general purposes
DC95/125494 DC95/125494. ISO/DIS 13966. Thermoplastics pipes and fittings. Nominal ring stiffnesses
DC95/714195 DC95/714195. Gas cylinders. Safe handling (ISO/DIS 11625)
DC95/714174 DC95/714174. ISO/DIS 12803. Requirements for representative sampling of plutonium nitrate solutions for determination of plutonium concentration
BS ISO/IEC 9646-7:1995 BS ISO/IEC 9646-7:1995. Information technology. Open systems interconnection. Conformance testing methodology and framework. Implementation conformance statements
BS ISO/IEC 9594-9:1995 BS ISO/IEC 9594-9:1995. Information technology. Open systems interconnection. Replication
BS ISO/IEC TR 11590:1995 BS ISO/IEC TR 11590:1995. Information technology. Open systems interconnection. LOTOS description of the CCR protocol
BS ISO/IEC TR 11589:1995 BS ISO/IEC TR 11589:1995. Information technology. Open systems interconnection. LOTOS description of the CCR service
BS EN 50103:1996 BS EN 50103:1996. Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for the active (including active implantable) medical device industry
EP 202:1995 EP 202:1995. BSI Electronic Book. Environmental Management Systems
DC95/562845 DC95/562845. Evaluation and routine testing in medical imaging departments. Part 2-8. Constancy tests. Protective shielding, -barriers, and -devices (IEC 1223-2-8,62B/227/CDV)
DC95/502684 DC95/502684. Methods for chemical analysis of tobacco and tobacco products. New part. Determination of nicotine purity. Gravimetric method using tungstosilicic acid (ISO/DIS 13276)
BS EN ISO 11963:1996 BS EN ISO 11963:1996. Plastics. Polycarbonate sheets. Types, dimensions and characteristics
DC95/502683 DC95/502683. BS 5202. Methods for chemical analysis of tobacco and tobacco products. Part 7 Determination of alkaloids in smoke condensate of cigarettes (Spectrometric method)
DC95/213587 DC95/213587. Methods of measurement on receiving antennas for satellite broadcast transmissions in the 12 GHz band. Part 2. Mechanical and environmental tests on individual and collective
DC95/521893 DC95/521893. BS 6068. Water quality. Part 2. Physical, chemical and biochemical methods. New section. Determination of selected plant treatment agents. Method using high performance liquid
DC95/715005 DC95/715005. ISO/DIS 12166. Resistance welding equipment. Particular specifications applicable to transformers with one secondary winding for multispot welding, as used in the automobile i
DC95/125569 DC95/125569. BS EN 12174. Chemicals used for treatment of water intended for human consumption. Disodium hexafluorosilicate
DC95/214026 DC95/214026. IEC 335-2-100. Safety of household and similar electrical appliances. Part 2. Particular requirements for combination microwave ovens (61/61B/988/CD)
DC95/714031 DC95/714031. Hydraulic fluid power. Mounting dimensions for single rod cylinders. 16 MPa (160 bar) series. Part 1. Medium series (ISO/DIS 6020-1)
DC95/714008 DC95/714008. Hydraulic fluid power. Determination of particulate contamination by automatic counting using the light-extinction principle (ISO/DIS 11500)
DC95/570512 DC95/570512. BS EN 12197 Gymnastics equipment. Horizontal bars. Safety requirements and test methods (prEN 12197)
DC95/570511 DC95/570511. BS EN 12196 Gymnastic equipment. Horses and bucks. Requirements and test methods including safety (prEN 12196)
DC95/213981 DC95/213981. IEC 674-2. Specifcation for plastic films for electrical purposes. Part 2 methods of test. Clause 16. Dissipation factor and permittivity. International document 15C/572/CDV.
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
