BIS Standards Catalogue
BS 6404-5:1995 BS 6404-5:1995. Magnetic materials. Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties
BS ISO 2597-1:1994 BS ISO 2597-1:1994. Iron ores.Determination of total iron content. Titrimetric method after tin (II) chloride reduction
BS ISO 8371:1994 BS ISO 8371:1994. Iron ores. Determination of decrepitation index
BS EN 126:1995 BS EN 126:1995. Multifunctional controls for gas burning appliances
BS 7509:1995, IEC 61307:1994 BS 7509:1995, IEC 61307:1994. Industrial microwave heating installations. Test methods for determination of power output
BS 5989-1:1995, ISO 104:1994 BS 5989-1:1995, ISO 104:1994. Rolling bearings: metric thrust bearings. Specification for dimensions of thrust bearings
PD 7002:1995 PD 7002:1995. Essential requirements for connection of terminal equipment to analogue interfaces of public switched telecommunications networks using either the earth calling, the loop ca
BS G 253:1995, ISO 8668-3:1994 BS G 253:1995, ISO 8668-3:1994. Specification for type 1 terminal junction systems
BS EN 993-1:1995, BS 1902-3.8:1995 BS EN 993-1:1995, BS 1902-3.8:1995. Methods of test for dense shaped refractory products. Determination of bulk density, apparent porosity and true porosity
BS EN 993-4:1995, BS 1902-3.9:1995 BS EN 993-4:1995, BS 1902-3.9:1995. Methods of test for dense shaped refractory products. Determination of permeability to gases
BS EN 993-6:1995, BS 1902-4.4:1995 BS EN 993-6:1995, BS 1902-4.4:1995. Methods of test for dense shaped refractory products. Determination of modulus of rupture at ambient temperature
BS ISO/IEC 9798-2:1994 BS ISO/IEC 9798-2:1994. Information technology. Security techniques. Entity authentication mechanisms. Mechanisms using symmetric encipherment algorithms
BS ISO/IEC 9804:1994 BS ISO/IEC 9804:1994. Information technology. Open systems interconnection. Service definition for the commitment, concurrency and recovery service element
BS ISO/IEC 9805-1:1994 BS ISO/IEC 9805-1:1994. Information technology. Open systems interconnection. Protocol for the commitment, concurrency and recovery service element. Protocol specification
BS ISO/IEC 9973:1994 BS ISO/IEC 9973:1994. Information technology. Computer graphics and image processing. Procedures for registration of graphical items
BS EN 726-4:1995 BS EN 726-4:1995. Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Application independent card related terminal requirements
BS EN ISO 2060:1995 BS EN ISO 2060:1995. Textiles. Yarn from packages. Determination of linear density (mass per unit length) by the skein method
BS 7805-1:1995 BS 7805-1:1995. Swaged collar grooved rivets. Specification for sizes up to and including 10 mm diameter
DC95/704069 DC95/704069. Aerospace series. Heat resisting alloy FE-PA 4901 solution and precipitation treated bars and sections a or D ≤ 100 mm (prEN 2237)
DC95/704068 DC95/704068. Aerospace series. Heat resisting alloy FE-PA 2501 solution and precipitation treated bars and sections a or D ≤ 200 mm (prEN 2178)
DC95/704067 DC95/704067. Aerospace series. Heat resisting alloy FE-PA 2501 solution and precipitation treated forgings De ≤ 100 mm (prEN 2177)
DC95/704066 DC95/704066. Aerospace series. Heat resisting alloy FE-PA 4901. Solution treated and descaled sheet and strip. a ≤ 3 mm (prEN 2170)
DC95/102478 DC95/102478. BS 6911:Part 4. Specification for earth-moving machinery.Testing earth-moving machinery. Method for the evaluation of engine power output
DC95/704740 DC95/704740. Tyres, valves and tubes. List of equivalent terms. Part 2. Tyre valves (ISO/DIS 3877-2)
DC95/704739 DC95/704739. Tyres, valves and tubes. List of equivalent terms. Part 1. Tyres (ISO/DIS 3877-1)
BS ISO 8323:1985 BS ISO 8323:1985. Freight containers. Air/surface (intermodel) general purpose containers. Specification and tests
BS ISO TR 10233:1989 BS ISO TR 10233:1989. General purpose flat pallets for through transit of goods. Performance requirements
BS ISO 9711-1:1990 BS ISO 9711-1:1990. Freight containers. Information related to containers on board vessels. Bay plan system
BS ISO 9711-2:1990 BS ISO 9711-2:1990. Freight containers. Information related to containers on board vessels. Telex data transmission
BS ISO 9897-3:1990 BS ISO 9897-3:1990. Freight containers. Container equipment data exchange (CEDEX). Message types for electronic data interchange
BS ISO/IEC TR 10091:1995 BS ISO/IEC TR 10091:1995. Information technology. Technical aspects of 130 mm optical disk cartridge write-once recording format
BS ISO/IEC TR 13561:1994 BS ISO/IEC TR 13561:1994. Information technology. Guidelines for effective use of optical disk cartridges conforming to ISO/IEC 10090
BS ISO 8459-3:1994 BS ISO 8459-3:1994. Information and documentation. Bibliographic data element directory. Information retrieval applications
BS EN ISO/IEC 10373:1995 BS EN ISO/IEC 10373:1995. Identification cards. Test methods
BS EN ISO/IEC 7812-1:1995 BS EN ISO/IEC 7812-1:1995. Identification cards. Identification of issuers. Numbering system
BS EN ISO/IEC 7812-2:1995 BS EN ISO/IEC 7812-2:1995. Identification cards. Identification of issuers. Application and registration procedures
BS ISO/IEC 15802-4:1994 BS ISO/IEC 15802-4:1994. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks - common specifications. Syst
BS ISO/IEC TR 11802-4:1994 BS ISO/IEC TR 11802-4:1994. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and
BS ISO/IEC 11729:1994 BS ISO/IEC 11729:1994. Information technology. Programming languages. Generic package of primitive functions for Ada
BS ISO/IEC 11573:1994 BS ISO/IEC 11573:1994. Information technology. Telecommunications and information exchange between systems. Synchronization methods and technical requirements for Private Integra
BS EN 714:1995, BS 2782-11:Method 1123F:1995 BS EN 714:1995, BS 2782-11:Method 1123F:1995. Thermoplastics piping systems. Non-end-load-bearing elastomeric sealing ring type joints between pressure pip
BS EN 713:1995, BS 2782-11:Method 1123B:1995 BS EN 713:1995, BS 2782-11:Method 1123B:1995. Plastics piping systems. Mechanical joints between fittings and polyolefin pressure pipes. Test method for le
DC95/704074 DC95/704074. Aerospace series. Heat resisting alloy FE-PA 2501 as forged. Forging stock a or D ≤ 200 mm (prEN 4264)
DC95/704073 DC95/704073. Aerospace series. Heat resisting alloy FE-PA 4901 as forged. Forging stock. a or D ≤ 200 mm. 690 MPa ≤ Rm ≤ 960 MPa (prEN 4263)
DC95/704070 DC95/704070. Aerospace series. Heat resisting alloy FE-PA 4901. Solution and precipitation treated forgings. De ≤ 100 mm
DC95/500801 DC95/500801. Personal protective equipment against falls from a height. List of equivalent terms (prEN 1868)
BS ISO 9897-1:1990 BS ISO 9897-1:1990. Freight containers. Container equipment data exchange (CEDEX). General communication codes
BS ISO TR 10232:1989 BS ISO TR 10232:1989. General-purpose flat pallets for through transit of goods. Design rating and maximum working load
BS ISO 10531:1992 BS ISO 10531:1992. Packaging. Complete, filled transport packages. Stability testing of unit loads
BS ISO 6780:1988 BS ISO 6780:1988. General-purpose flat pallets for through transit of goods. Principal dimensions and tolerances
BS ISO 10368:1992 BS ISO 10368:1992. Freight thermal containers. Remote condition monitoring
BS ISO 9669:1990 BS ISO 9669:1990. Series 1 freight containers. Interface connections for tank containers
BS ISO 11455:1995 BS ISO 11455:1995. Raw optical glass. Determination of birefringence
DC95/203359 DC95/203359. IEC 598-2-8:1981 Luminaires. Part 2. Particular requirements. Section Eight. Handlamps. Sub-clause 8.6.5 (34D/369/CDV)
DC95/121725 DC95/121725. Packaging for terminally sterilized medical devices (ISO/DIS 11607)
WD/DC95/704174 WD/DC95/704174. Guides for procurement. Turbines. Steam turbine (prEN 45536)
DC95/121849 DC95/121849. Specification for industrial wire screens (ISO/DIS 14315)
DC95/704792 DC95/704792. Passenger cars. Steady state circular test procedure (ISO/DIS 4138)
DC95/203534 DC95/203534. Short circuit currents. Calculation of the effects in d.c. auxiliary installations in power plants and substations (IEC Document 73/74/CDV)
DC95/203285 DC95/203285. prENV 50185-3. Infra-red free air application. Part 3. Measuring conditions
BS EN 844-3:1995 BS EN 844-3:1995. Round and sawn timber. Terminology. General terms relating to sawn timber
BS EN 844-1:1995 BS EN 844-1:1995. Round and sawn timber. Terminology. General terms common to round timber and sawn timber
BS EN 712:1995, BS 2782-11:Method 1123H:1995 BS EN 712:1995, BS 2782-11:Method 1123H:1995. Thermoplastics piping systems. End-load bearing mechanical joints between pressure pipes and fittings. Test m
BS EN 532:1995 BS EN 532:1995. Protective clothing. Protection against heat and flame. Test method for limited flame spread
BS EN 60544-1:1995, IEC 60544-1:1994 BS EN 60544-1:1995, IEC 60544-1:1994. Electrical insulating materials. Determination of the effects of ionizing radiation. Radiation interaction and dosimetry
BS EN 61094-1:1995, IEC 61094-1:1992 BS EN 61094-1:1995, IEC 61094-1:1992. Specification for measurement microphones. Specifications for laboratory standard microphones
BS EN 60704-2-3:1995 BS EN 60704-2-3:1995. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for dishwashers
BS 2846-8:1995 BS 2846-8:1995. Guide to statistical interpretation of data. Estimation of a median
BS 6133:1995 BS 6133:1995. Code of practice for safe operation of lead-acid stationary batteries
BS 2782-4:Method 432D:1995 BS 2782-4:Method 432D:1995. Methods of testing plastics. Chemical properties. Determination of styrene evaporation from unsaturated polyester resins
BS 5628-2:1995 BS 5628-2:1995. Code of practice for use of masonry. Structural use of reinforced and prestressed masonry
BS EN 390:1995 BS EN 390:1995. Glued laminated timber. Sizes. Permissible deviations
BS ISO/IEC 12227:1995 BS ISO/IEC 12227:1995. Information technology. Programming languages. SQL/Ada Module Description Language (SAMeDL)
BS ISO/IEC 13213:1994 BS ISO/IEC 13213:1994. Information technology. Microprocessor systems. Control and Status Registers (CSR) Architecture for microcomputer buses
BS ISO/IEC 10857:1994 BS ISO/IEC 10857:1994. Information technology. Microprocessor systems. Futurebus+. Logical protocol specification
BS ISO/IEC 10861:1994 BS ISO/IEC 10861:1994. Information technology. Microprocessor systems. High-performance synchronous 32-bit bus: MULTIBUS II
BS ISO/IEC 9314-5:1995 BS ISO/IEC 9314-5:1995. Information processing systems. Fibre Distributed Data Interface (FDDI). Hybrid Ring Control (HRC)
BS 5357:1995 BS 5357:1995. Code of practice for installation of security glazing
BS EN ISO 8467:1995, BS 6068-2.32:1995 BS EN ISO 8467:1995, BS 6068-2.32:1995. Water quality. Determination of permanganate index
BS EN ISO 3868:1995 BS EN ISO 3868:1995. Metallic and other non-organic coatings. Measurement of coating thicknesses. Fizeau multiple-beam interferometry method
BS EN 60704-2-4:1995, IEC 60704-2-4:1989 BS EN 60704-2-4:1995, IEC 60704-2-4:1989. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Washing ma
BS EN 641:1995 BS EN 641:1995. Reinforced concrete pressure pipes, cylinder type, including joints and fittings
DD ENV 1250-1:1995 DD ENV 1250-1:1995. Wood preservatives. Methods of measuring losses of active ingredients and other preservative ingredients from treated timber. Laboratory method for obtaining sam
BS EN 295-4:1995 BS EN 295-4:1995. Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for special fittings, adaptors and compatible accessories
BS EN 993-13:1995 BS EN 993-13:1995. Methods of test for dense shaped refractory products. Specification for pyrometric reference cones for laboratory use
BS EN ISO 10304-1:1995, BS 6068-2.46:1995 BS EN ISO 10304-1:1995, BS 6068-2.46:1995. Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of fluoride, chlor
BS EN 20898-7:1995, ISO 898-7:1992 BS EN 20898-7:1995, ISO 898-7:1992. Mechanical properties of fasteners. Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
BS 7823-1:1995, ISO 11687-1:1995 BS 7823-1:1995, ISO 11687-1:1995. Pedestal plain bearings. Specification for pillow blocks
BS 7823-2:1995, ISO 11687-2:1995 BS 7823-2:1995, ISO 11687-2:1995. Pedestal plain bearings. Specification for side flange bearings
BS 7823-3:1995, ISO 11687-3:1995 BS 7823-3:1995, ISO 11687-3:1995. Pedestal plain bearings. Specification for centre flange bearings
BS EN 61180-2:1995, IEC 61180-2:1994 BS EN 61180-2:1995, IEC 61180-2:1994. High-voltage test techniques for low-voltage equipment. Test equipment
BS 6G 205-1:1995 BS 6G 205-1:1995. Secondary batteries for aircraft. Specification for lead-acid batteries
DD ENV 1257-1:1994 DD ENV 1257-1:1994. Identification card systems.Rules for personal identification number (PIN) handling in intersector environments. PIN presentation
BS EN 597-2:1995 BS EN 597-2:1995. Furniture. Assessment of the ignitability of mattresses and upholstered bed bases. Ignition source: match flame equivalent
BS EN 597-1:1995 BS EN 597-1:1995. Furniture. Assessment of the ignitability of mattresses and upholstered bed bases. Ignition source: smouldering cigarette
BS 6548-6:1995, IEC 60706-6:1994 BS 6548-6:1995, IEC 60706-6:1994. Maintainability of equipment. Guide to statistical methods in maintainability evaluation
BS ISO/IEC 10164-11:1994 BS ISO/IEC 10164-11:1994. Information technology. Open systems interconnection. Systems management. Metric objects and attributes
BS EN ISO 1520:1995, BS 3900-E4:1995 BS EN ISO 1520:1995, BS 3900-E4:1995. Paints and varnishes. Cupping test
BS EN ISO 1519:1995, BS 3900-E1:1995 BS EN ISO 1519:1995, BS 3900-E1:1995. Paints and varnishes. Bend test (cylindrical mandrel)
BS EN 61262-4:1995, IEC 61262-4:1994 BS EN 61262-4:1995, IEC 61262-4:1994. Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment. Determination of the image dist
BS EN 614-1:1995 BS EN 614-1:1995. Safety of machinery. Ergonomic design principles. Terminology and general principles
BS 7794:1995 BS 7794:1995. Specification for square-drive sockets, driving squares and accessories for power-driven socket wrenches
BS EN 726-3:1996 BS EN 726-3:1996. Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Application independent card requirements
BS 890:1995 BS 890:1995. Specification for building limes
BS EN 736-1:1995 BS EN 736-1:1995. Valves. Terminology. Definition of types of valves
BS EN 834:1995 BS EN 834:1995. Heat cost allocators for the determination of the consumption of room heating radiators. Appliances with electrical energy supply
BS EN 835:1995 BS EN 835:1995. Heat cost allocators for the determination of the consumption of room heating radiators. Appliances without an electrical energy supply, based on the evaporation princip
BS ISO 490:1993 BS ISO 490:1993. Cinematography. Magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (Type 1). Positions and width
BS ISO 23:1993 BS ISO 23:1993. Cinematography. Camera usage of 35 mm motion picture film. Specifications
BS ISO 70:1981 BS ISO 70:1981. Cinematography. Monophonic 35 mm negative photographic sound record on 35 mm motion-picture film. Position and maximum width dimensions
BS ISO 26:1993 BS ISO 26:1993. Cinematography. Projector usage of 16 mm motion-picture films for direct front projection. Specifications
BS ISO 29:1980 BS ISO 29:1980. Cinematography. Projector usage of 8 mm Type R silent motion-picture film for direct front projection. Specifications
BS ISO 486:1988 BS ISO 486:1988. Cinematography. 16 mm motion-picture film perforated 8 mm Type R. Cutting and perforating dimensions
BS ISO 359:1983 BS ISO 359:1983. Cinematography. Projectable image area on 16 mm motion-picture prints. Dimensions and location
DD ENV 1250-2:1995 DD ENV 1250-2:1995. Wood preservatives. Methods of measuring losses of active ingredients and other preservative ingredients from treated timber. Laboratory method for obtaining sam
BS QC 790106:1995, IEC 60748-2-9:1994 BS QC 790106:1995, IEC 60748-2-9:1994. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circ
BS QC 790107:1995, IEC 60748-2-10:1994 BS QC 790107:1995, IEC 60748-2-10:1994. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated ci
BS EN 60068-2-17:1995, IEC 60068-2-17:1994 BS EN 60068-2-17:1995, IEC 60068-2-17:1994. Environmental testing. Test methods. Test Q. Sealing
BS EN 671-2:1995 BS EN 671-2:1995. Fixed fire fighting systems. Hose systems. Hose systems with lay-flat hose
BS EN 640:1995 BS EN 640:1995. Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
BS EN 638:1995 BS EN 638:1995. Plastics piping and ducting systems. Thermoplastics pipes. Determination of tensile properties
DC95/121959 DC95/121959. Rubber tubing and hoses for fuel circuits for internal combustion engines. Specification. Part 1. Conventional liquid fuels (ISO/DIS 4639-1)
DC95/203939 DC95/203939. IEC 931-3 Shunt capacitors of the non-self-healing type for a.c. power systems having a rated voltage up to and including 1000 V. Part 3. Internal fuses (IEC document 33/200/C
DC95/121960 DC95/121960. ISO/DIS 4672 Rubber and plastics hoses. Subambient-temperature flexibility tests
DC95/704700 DC95/704700. Aluminium and aluminium alloys. Drawn wire. Part 2:Mechanical properties (prEN 1301-2)
DC95/704974 DC95/704974. Aluminium alloy gas cylinders. Operational requirements for avoidance of neck and shoulder cracks. ISO/DIS 13770
DC95/704378 DC95/704378. Pressure sensing devices for gas burners and gas burning appliances. prEN 1854
BS 7819:1995, IEC 61026:1991 BS 7819:1995, IEC 61026:1991. Guidelines for application of analytical test methods for thermal endurance testing of electrical insulating materials
BS 6893:Part 3:Section 406 to 408:1995, IEC 60684-3-406 to 408:1988 BS 6893:Part 3:Section 406 to 408:1995, IEC 60684-3-406 to 408:1988. Flexible insulating sleeving for electrical purposes. Specifica
BS 6893-3.320:1995, IEC 60684-3-320:1987 BS 6893-3.320:1995, IEC 60684-3-320:1987. Flexible insulating sleeving for electrical purposes. Specification for requirements for individual types of sleeving
BS 5664-3.3:1995, IEC 60455-3-3:1984 BS 5664-3.3:1995, IEC 60455-3-3:1984. Solventless polymerisable resinous compounds used for electrical insulation. Specification for individual materials. Unfilled
BS 5664-3.4:1995, IEC 60455-3-4:1984 BS 5664-3.4:1995, IEC 60455-3-4:1984. Solventless polymerisable resinous compounds used for electrical insulation. Specification for individual materials. Filled p
BS 5664-3.11:1995, IEC 60455-3-11:1988 BS 5664-3.11:1995, IEC 60455-3-11:1988. Solventless polymerisable resinous compounds used for electrical insulation. Specification for individual materials. Epox
BS 7816-1:1995, IEC 61244-1:1993 BS 7816-1:1995, IEC 61244-1:1993. Determination of long-term radiation ageing in polymers. Techniques for monitoring diffusion-limited oxidation
BS IEC 1231:1993 BS IEC 1231:1993. International lamp coding system (ILCOS)
BS 6893:Part 3:Section 100 to 105:1995 BS 6893:Part 3:Section 100 to 105:1995. Flexible insulating sleeving for electrical purposes. Specification for requirements for individual types of sleeving. Ex
BS EN ISO 10536-1:1995 BS EN ISO 10536-1:1995. Identification cards. Contactless integrated circuit(s) cards. Physical characteristics
BS EN 169101:1995 BS EN 169101:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: quartz crystal controlled oscillators (capability
BS EN 144004:1995 BS EN 144004:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: directly heated positive temperature coefficient t
BS EN 144003:1995 BS EN 144003:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: directly heated positive temperature coefficient t
BS EN 144002:1995 BS EN 144002:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: directly heated positive temperature coefficient t
BS EN 144001:1995 BS EN 144001:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: directly heated positive temperature coefficient t
BS 7811-2:1995, IEC 60544-2:1991 BS 7811-2:1995, IEC 60544-2:1991. Guide for determining the effects of ionizing radiation on insulating materials. Procedures for irradiation and test
BS 7810:Part 2:1995, IEC 61067-2:1992 BS 7810:Part 2:1995, IEC 61067-2:1992. Specification for glass and glass polyester fibre woven tapes. Methods of test
BS 7809:Part 2:1995, IEC 61068-2:1991 BS 7809:Part 2:1995, IEC 61068-2:1991. Polyester fibre woven tapes. Methods of test
BS EN 1129-2:1995 BS EN 1129-2:1995. Furniture. Foldaway beds. Safety requirements and testing. Test methods
BS 6068-2.49:1995, ISO 10566:1994 BS 6068-2.49:1995, ISO 10566:1994. Water quality. Physical, chemical and biochemical methods. Determination of aluminium. Spectrometric method using pyrocatechol viol
BS 2000-397:1995 BS 2000-397:1995. Methods of test for petroleum and its products. Recovery of bitumen binders. Dichloromethane extraction rotary film evaporator method
BS 2000:Part 398:1995, ISO 10370:1993 BS 2000:Part 398:1995, ISO 10370:1993. Methods of test for petroleum and its products. Petroleum products. Determination of carbon residue. Micro method
BS 2000:Part 381:1995, ISO 3648:1994 BS 2000:Part 381:1995, ISO 3648:1994. Methods of test for petroleum and its products. Aviation fuels. Estimation of net specific energy
BS 2000-377:1995, ISO 10478:1994 BS 2000-377:1995, ISO 10478:1994. Methods of test for petroleum and its products. Petroleum products. Determination of aluminium and silicon in fuel oils. Inductively
BS 2000:Part 367:1995, ISO 4259:1992 BS 2000:Part 367:1995, ISO 4259:1992. Methods of test for petroleum and its products. Petroleum products. Determination and application of precision data in relati
BS2000-317/IP : 1995 BS2000-317/IP : 1995. Methods of test for petroleum and its products. Determination of residues in liquefied petroleum gases. Low temperature evaporation method
BS 2000-276:1995, ISO 3771:1994 BS 2000-276:1995, ISO 3771:1994. Methods of test for petroleum and its products. Petroleum products. Determination of base number. Perchloric acid potentiometric titrat
BS 2000-226:1995, ISO 2909:1981 BS 2000-226:1995, ISO 2909:1981. Methods of test for petroleum and its products. Petroleum products. Calculation of viscosity index from kinematic viscosity
BS 2000:Part 170:1995 BS 2000:Part 170:1995. Methods of test for petroleum and its products. Petroleum products. Determination of flash point. Abel closed cup method
BS 2000:Part 156:1995, ISO 3837:1993 BS 2000:Part 156:1995, ISO 3837:1993. Methods of test for petroleum and its products. Liquefied petroleum products. Determination of hydrocarbon types. Fluorescent
BS 2000-71.2:1995, ISO 3105:1994 BS 2000-71.2:1995, ISO 3105:1994. Methods of test for petroleum and its products. Kinematic viscosity. Specifications and operating instructions for glass capillary ki
BS 2000:Part 71:Section 71.1:1995, ISO 3104:1994 BS 2000:Part 71:Section 71.1:1995, ISO 3104:1994. Methods of test for petroleum and its products. Kinematic viscosity. Petroleum products. Transparent
BS 2000-57:1995, ISO 3014:1993 BS 2000-57:1995, ISO 3014:1993. Methods of test for petroleum and its products. Petroleum products. Determination of the smoke point of kerosine
BS 2000:Part 40:1995, ISO 7536:1994 BS 2000:Part 40:1995, ISO 7536:1994. Methods of test for petroleum and its products. Petroleum products. Determination of oxidation stability of gasoline. Induction
BS 2000-15:1995, ISO 3016:1994 BS 2000-15:1995, ISO 3016:1994. Methods of test for petroleum and its products. Petroleum products. Determination of pour point
BS 2000-10:1995 BS 2000-10:1995. Methods of test for petroleum and its products. Determination of kerosine burning characteristics. 24 hour method
BS 2000-1:1995 BS 2000-1:1995. Methods of test for petroleum and its products. Determination of acidity, neutralization value. Colour indicator titration method
BS EN 61259:1995, IEC 61259:1994 BS EN 61259:1995, IEC 61259:1994. Gas-insulated metal-enclosed switchgear for rated voltages 72,5 kV and above. Requirements for switching of bus-charging currents by
BS 2782-0:1995 BS 2782-0:1995. Methods of testing plastics. Introduction
DC95/121910 DC95/121910. Adhesives for paper and board, packaging and disposable sanitary products. Determination of tensile strength and elongation at break (prEN 1896)
DC95/121896 DC95/121896. BS EN 1840. Structural adhesives. Guidelines for the surface preparation of plastics (prEN 1840)
DC95/704241 DC95/704241. Methods for the calibration of vibration and shock pick-ups. Part 22. Accelerometer resonance testing. General methods (ISO/DIS 5347-22)
DC95/122038 DC95/122038. Rubber, vulcanized or thermoplastic. Determination of crack growth (De Mattia) (revision of ISO 133:1983)
DC95/122037 DC95/122037. Rubber, vulcanized or thermoplastic. Determination of flex cracking (De Mattia) (revision of ISO 132:1983)
BS EN 392:1995 BS EN 392:1995. Glued laminated timber. Shear test of glue lines
BS EN 408:1995 BS EN 408:1995. Timber structures. Structural timber and glued laminated timber. Determination of some physical and mechanical properties
BS EN 391:1995 BS EN 391:1995. Glued laminated timber. Delamination of glue lines
BS EN 1129-1:1995 BS EN 1129-1:1995. Furniture. Foldaway beds. Safety requirements and testing. Safety requirements
DC95/122065 DC95/122065. Graphic technology. Prepress digital data exchange. Input data for characterization of 4-colour process printing targets (ISO/DIS 12642)
DC95/122127 DC95/122127. Plastics. Basic materials for polyurethanes. Pure isocyanates. Determination of isocyanate groups concentration (ISO/DIS 9369)
DC95/102828 DC95/102828. prEN 1879. Products and systems for the protection and repair of concrete structures. Test methods. Determination of ash by direct calcination
BS ISO 897:1988 BS ISO 897:1988. Photography. Roll films, 126, 110 and 135 size films. Identification of the image-bearing side
BS ISO 732:1991 BS ISO 732:1991. Photography. Film dimensions. 120 and 220 sizes
BS ISO 1048:1991 BS ISO 1048:1991. Photography. Exposed roll films. Identification
BS ISO 1009:1992 BS ISO 1009:1992. Photography. Paper dimensions. Rolls for printers
BS ISO 1230:1992 BS ISO 1230:1992. Photography. Determination of flash guide numbers
BS ISO 3620:1994 BS ISO 3620:1994. Photography. Processing chemicals. Specifications for aluminium potassium sulfate
BS ISO 1008:1992 BS ISO 1008:1992. Photography. Paper dimensions. Pictorial sheets
BS ISO 491:1995 BS ISO 491:1995. Cinematography. 35 mm motion-picture film and magnetic film. Cutting and perforating dimensions
BS EN ISO 8402:1995 BS EN ISO 8402:1995. Quality management and quality assurance. Vocabulary
BS EN 635-1:1995 BS EN 635-1:1995. Plywood. Classification by surface appearance. General
BS 952-1:1995 BS 952-1:1995. Glass for glazing. Classification
BS A 310:1995, ISO 3186:1994 BS A 310:1995, ISO 3186:1994. Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250
BS EN 60352-3:1995, IEC 60352-3:1993 BS EN 60352-3:1995, IEC 60352-3:1993. Solderless connections. Solderless accessible insulation displacement connections. General requirements, test methods and pra
BS EN ISO 2078:1995, BS 946-2:1995 BS EN ISO 2078:1995, BS 946-2:1995. Textile glass. Yarns. Designation
BS 6893:Part 3:Section 240 to 243:1995, IEC 60684-3-240 to 243:1991 BS 6893:Part 3:Section 240 to 243:1995, IEC 60684-3-240 to 243:1991. Flexible insulating sleeving for electrical purposes. Specifica
DC95/204284 DC95/204284. IEC 317-34. Specifications for particular types of winding wires. Part 34. Polyester enamelled round copper wire, class 130 L. IEC Document 55/476/CDV
DC95/204285 DC95/204285. IEC 317-46. Specification for particular types of winding wires. Part 46. Aromatic polymide enamelled round copper wire, class 240. IEC Document 55/479/CDV
DC95/204286 DC95/204286. IEC 317-47.Specification for particular types of winding wires. Part 47. Aromatic polymide enamelled rectangular copper wire, class 240. IEC document 55/480/CDV
BS EN 790:1995 BS EN 790:1995. Inland navigation vessels. Stairs with inclination angles of 45° to 60°. Requirements, types
BS 6912-16:1995, ISO 13333:1994 BS 6912-16:1995, ISO 13333:1994. Safety of earth-moving machinery. Specification for dumper body support and operator's cab tilt support devices
BS 6912-17:1995, ISO 7096:1994 BS 6912-17:1995, ISO 7096:1994. Safety of earth-moving machinery. Specification for laboratory evaluation of operator seat vibration
BS 6912-18:1995, ISO 12508:1994 BS 6912-18:1995, ISO 12508:1994. Safety of earth-moving machinery. Specification for bluntness of edges at the operator station and in maintenance areas
BS 5214-1:1995, ISO 5893:1993 BS 5214-1:1995, ISO 5893:1993. Specification for testing machines for rubbers and plastics. Tensile, flexural and compression types (constant rate of traverse)
BS ISO 6402-1:1990 BS ISO 6402-1:1990. Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials. Designation
BS ISO 11605:1995 BS ISO 11605:1995. Paper and board. Calibration of variable-area flowmeters
BS 7832:1995, ISO 9699:1994 BS 7832:1995, ISO 9699:1994. Performance standards in building. Checklist for briefing. Contents of brief for building design
BS 2782-5:Method 540G:1995, ISO 4892-4:1994 BS 2782-5:Method 540G:1995, ISO 4892-4:1994. Methods of testing plastics. Optical and colour properties, weathering. Methods of exposure to laboratory light
BS 2782-5:Method 540D:1995 BS 2782-5:Method 540D:1995. Methods of testing plastics. Optical and colour properties, weathering. Methods of exposure to laboratory light sources. General guidance
BS 6043-2.11:1995, ISO 9406:1995 BS 6043-2.11:1995, ISO 9406:1995. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of volatile matt
DC95/402133 DC95/402133. Guide to process capability and performance measures (ISO/DTR 12783)
DC95/540975 DC95/540975. General use light gauge metal containers. Nominal filling volumes of round cylindrical and tapered containers of up to 40 000 ml (ISO 10193)
DD ENV 1122:1995 DD ENV 1122:1995. Determination of cadmium in plastics with the method of the wet decomposition
BS 3424-16:1995 BS 3424-16:1995. Testing coated fabrics. Method 18. Determination of air permeability
DC95/122300 DC95/122300. Plastics. Epoxy resins and related materials. Determination of total saponifiable chlorine (ISO/DIS 13651)
DC95/705546 DC95/705546. Aerospace series. Clamps. Worm Drive. Dimensions. Mass. (prEN 4234)
BS EN 60835-3-10:1995, BS 7573-3.10:1995,IEC 60835-3-10:1994 BS EN 60835-3-10:1995, BS 7573-3.10:1995,IEC 60835-3-10:1994. Methods of measurement for equipment used in digital microwave radio transmis
BS EN 60521:1995 BS EN 60521:1995. Class 0.5, 1 and 2 alternating-current watthour meters
BS EN 60514:1995 BS EN 60514:1995. Acceptance inspection of class 2 alternating-current watthour meters
DD ENV 61400-1:1995 DD ENV 61400-1:1995. Wind turbine generator systems. Safety requirements
BS EN 60835-2-2:1995, BS 7573-2.2:1995,IEC 60835-2-2:1994 BS EN 60835-2-2:1995, BS 7573-2.2:1995,IEC 60835-2-2:1994. Methods of measurement for equipment used in digital microwave radio transmission s
BS EN 61309:1995, IEC 61309:1995 BS EN 61309:1995, IEC 61309:1995. Deep-fat fryers for household use. Methods for measuring the performance
BS EN 60835-3-5:1995, BS 7573-3.5:1995,IEC 60835-3-5:1994 BS EN 60835-3-5:1995, BS 7573-3.5:1995,IEC 60835-3-5:1994. Methods of measurement for equipment used in digital microwave radio transmission s
BS EN 61079-2:1995, IEC 61079-2:1992 BS EN 61079-2:1995, IEC 61079-2:1992. Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band. Electrical measurements on DBS
BS EN 61079-3:1995, IEC 61079-3:1993 BS EN 61079-3:1995, IEC 61079-3:1993. Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band. Electrical measurements of over
BS EN 61114-1:1995, IEC 61114-1:1992 BS EN 61114-1:1995, IEC 61114-1:1992. Methods of measurement on receiving antennas for satellite broadcast transmissions in the 12 GHz band. Electrical measurement
BS EN 61079-5:1995, IEC 61079-5:1993 BS EN 61079-5:1995, IEC 61079-5:1993. Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band. Electrical measurements on deco
BS EN 61310-1:1995, IEC 61310-1:1995 BS EN 61310-1:1995, IEC 61310-1:1995. Safety of machinery. Indication, marking and actuation. Requirements for visual, auditory and tactile signals
BS EN 61310-2:1995, IEC 61310-2:1995 BS EN 61310-2:1995, IEC 61310-2:1995. Safety of machinery. Indication, marking and actuation. Requirements for marking
BS EN 61079-1:1995, IEC 61079-1:1992 BS EN 61079-1:1995, IEC 61079-1:1992. Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band. Radio-frequency measurements on
BS EN 623-1:1995 BS EN 623-1:1995. Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of the presence of defects by dye penetration tests
BS EN 61116:1995, IEC 61116:1992 BS EN 61116:1995, IEC 61116:1992. Electromechanical equipment guide for small hydroelectric installations
DD ENV 1997-1:1995 DD ENV 1997-1:1995. Eurocode 7. Geotechnical design. General rules (together with United Kingdom National Application Document)
BS ISO/IEC 8473-3:1995 BS ISO/IEC 8473-3:1995. Information technology. Protocol for providing the connectionless-mode network service. Provision of the underlying service by an X.25 subnetwork
BS ISO/IEC 8473-4:1995 BS ISO/IEC 8473-4:1995. Information technology. Protocol for providing the connectionless-mode network service. Provision of the underlying service by a subnetwork that provides
BS ISO/IEC 13575:1995 BS ISO/IEC 13575:1995. Information technology. Telecommunications and information exchange between systems. 50-pole interface connector mateability dimensions and contact number
BS ISO/IEC 9798-4:1995 BS ISO/IEC 9798-4:1995. Information technology. Security techniques. Entity authentication mechanisms. Mechanisms using a cryptographic check function
BS 1421:1995 BS 1421:1995. Specification for picks, beater picks and mattocks
BS 5224:1995 BS 5224:1995. Specification for masonry cement
BS EN 963:1995 BS EN 963:1995. Geotextiles and geotextile-related products. Sampling and preparation of test specimens
BS EN 965:1995 BS EN 965:1995. Geotextiles and geotextile-related products. Determination of mass per unit area
BS EN 60335-2-59:1995 BS EN 60335-2-59:1995. Specification for safety of household and similar electrical appliances. Particular requirements. Insect killers
BS EN ISO 105-N04:1995 BS EN ISO 105-N04:1995. Textiles. Tests for colour fastness. Colour fastness to bleaching: Sodium chlorite (severe)
BS 8202-1:1995 BS 8202-1:1995. Coatings for fire protection of building elements. Code of practice for the selection and installation of sprayed mineral coatings
BS ISO 11944:1993 BS ISO 11944:1993. Round general use light gauge metal containers. Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity
BS ISO 10154:1991 BS ISO 10154:1991. Light gauge metal containers. Three-piece necked-in tinplate aerosol cans. Dimensions of the top end
BS ISO 8164:1990 BS ISO 8164:1990. Glass containers. 520 ml Euro-form bottles. Dimensions
BS ISO 543:1990 BS ISO 543:1990. Photography. Photographic films. Specifications for safety film
BS 7814:1995 BS 7814:1995. Specification for bolts and screws incorporating either underhead locking or anti-rotation features
BS 669:Part 2:1995 BS 669:Part 2:1995. Flexible hoses, end fittings and sockets for gas burning appliances. Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for c
BS EN 10016-2:1995 BS EN 10016-2:1995. Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for general purpose rod
BS EN 10016-3:1995 BS EN 10016-3:1995. Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for rimmed and rimmed substitute low carbon steel rod
BS EN 451-2:1995 BS EN 451-2:1995. Method of testing fly ash. Determination of fineness by wet sieving
DC95/501106 DC95/501106. BS EN ISO 11290-1 (BS 5763 New Part) Microbiology of food and animal feeding stuffs. Horizontal method for the detection and enumeration of Listeria monocytogenes. Part 1. Det
DC95/204763 DC95/204763. 59/143/CDV IEC 704-2-X (Second edition) Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Part 2. Particular
DC95/204499 DC95/204499. IEC 456. Electric clothes washing machines for household use. Methods for measuring the performance (59D/104/CD)
BS 6913-12:1995, ISO 10261:1994 BS 6913-12:1995, ISO 10261:1994. Operation and maintenance of earth-moving machinery. Specification for a product identification numbering system
BS 903-A35:1995, ISO 471:1995 BS 903-A35:1995, ISO 471:1995. Physical testing of rubber. Temperatures, humidities and times for conditioning and testing of test pieces
BS 7807:1995 BS 7807:1995. Code of practice for design, installation and servicing of integrated systems incorporating fire detection and alarm systems and/or other security systems for buildings othe
BS 7506-1:1995 BS 7506-1:1995. Methods for measurement in electrostatics. Guide to basic electrostatics
BS 7786:1995 BS 7786:1995. Specification for unsintered PTFE tape. General requirements
BS EN 60423:1995 BS EN 60423:1995. Conduits for electrical purposes. Outside diameters of conduits for electrical installations and threads for conduits and fittings
BS EN ISO 105-N02:1995 BS EN ISO 105-N02:1995. Textiles. Tests for colour fastness. Colour fastness to bleaching: Peroxide
BS EN ISO 105-N03:1995 BS EN ISO 105-N03:1995. Textiles. Tests for colour fastness. Colour fastness to bleaching: Sodium chlorite (mild)
BS EN ISO 105-N05:1995 BS EN ISO 105-N05:1995. Textiles. Tests for colour fastness. Colour fastness to stoving
BS EN ISP 10610-1:1995 BS EN ISP 10610-1:1995. Information technology. International standardized profile FOD11. Open document format: simple document structure. Character content architecture only. D
BS 3790:1995 BS 3790:1995. Specification for endless wedge belt drives and endless V-belt drives
BS 3424-28:1995 BS 3424-28:1995. Testing coated fabrics. Method 31. Determination of specular gloss
BS EN 475:1995 BS EN 475:1995. Medical devices. Electrically-generated alarm signals
BS 3761:1995 BS 3761:1995. Specification for solvent-based paint remover
BS 7140:1995, ISO 7960:1995 BS 7140:1995, ISO 7960:1995. Airborne noise emitted by woodworking machine tools. Operating conditions for woodworking machines
BS EN 10016-4:1995 BS EN 10016-4:1995. Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for rod for special applications
BS EN 45003:1995 BS EN 45003:1995. Calibration and testing laboratory accreditation systems. General requirements for operation and recognition
BS EN 45004:1995 BS EN 45004:1995. General criteria for the operation of various types of bodies performing inspection
DD ENV 1390:1995 DD ENV 1390:1995. Wood preservatives. Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae. Laboratory method
BS EN 964-1:1995 BS EN 964-1:1995. Geotextiles and geotextile-related products. Determination of thickness at specified pressures. Single layers
BS EN 10024:1995 BS EN 10024:1995. Hot rolled taper flange I sections. Tolerances on shape and dimensions
BS 3375-1:1995 BS 3375-1:1995. Management services. Guide to organization study.
BS EN ISO 4566:1995 BS EN ISO 4566:1995. Small craft with inboard engine. Propeller shaft ends and bosses with 1:10 taper
BS 7821-1:1995 BS 7821-1:1995. Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. General requirements and requireme
BS 7822-3:1995, IEC 60664-2-1:1997 BS 7822-3:1995, IEC 60664-2-1:1997. Insulation coordination for equipment within low-voltage systems. Use of coatings to achieve insulation coordination of printed b
BS 7824-3.3:1995, IEC 60819-3-3:1991 BS 7824-3.3:1995, IEC 60819-3-3:1991. Non-cellulosic papers for electrical purposes. Specifications for individual materials. Unfilled aramid (aromatic polyamide)
BS 5691-4.1:1995, IEC 60216-4-1:1990 BS 5691-4.1:1995, IEC 60216-4-1:1990. Guide for the determination of thermal endurance properties of electrical insulating materials. Ageing ovens. Single chamber
BS 7809:Part 1:1995, IEC 61068-1:1991 BS 7809:Part 1:1995, IEC 61068-1:1991. Polyester fibre woven tapes. Definitions, designation and general requirements
BS 354:1995 BS 354:1995. Recommendations for photometric integrators
BS 7825-1:1995 BS 7825-1:1995. Calibration of rubber and plastics test equipment. Specification for principles and general requirements
DISC PD 0005:1995 DISC PD 0005:1995. Code of practice for IT service management
DC95/540366 DC95/540366. ISO/DIS 11925-2. Reaction to fire tests. Ignitability of building products subjected to direct impingement of lfame under zero impressed irradiance. Part 2. Single flame sourc
DC95/706110 DC95/706110. Steel and iron. Determination of cobalt content. Flame atomic absorption spectrometric method (ISO/DIS 11652)
DC95/561198 DC95/561198. Implants for surgery. Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) (ISO/DIS 13356)
DC95/122358 DC95/122358. Textile-glass-reinforced plastics, prepegs, moulding compounds and laminates. Determination of the textile glass and mineral-filler content. Calcination method (ISO/DIS 1172)
DC95/122357 DC95/122357. Rubber, vulcanized or thermoplastic. Determination of tear strength. Part 2. Small (Delft) test pieces (ISO/DIS 34-2)
DC95/705329 DC95/705329. Founding. Technical conditions of delivery. Part 5. Additional requirements for magnesium alloy castings (prEN 1559-5)
BS 5655-10.1.1:1995 BS 5655-10.1.1:1995. Lifts and service lifts. Specification for the testing and examination of lifts and service lifts. Electric lifts. Commissioning tests for new lifts
BS 5655-10.2.1:1995 BS 5655-10.2.1:1995. Lifts and service lifts. Specification for the testing and examination of lifts and service lifts. Hydraulic lifts. Commissioning tests for new lifts
BS EN 715:1995, BS 2782-11:Method 1123G:1995 BS EN 715:1995, BS 2782-11:Method 1123G:1995. Thermoplastics piping systems. End-load-bearing joints between small diameter pressure pipes and fittings. Te
BS EN 3446:1995 BS EN 3446:1995. Bearings, precision ball without flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads
BS EN ISO 8583:1995 BS EN ISO 8583:1995. Financial transaction card originated messages. Interchange message specifications
BS EN 338:1995 BS EN 338:1995. Structural timber. Strength classes
BS EN 519:1995 BS EN 519:1995. Structural timber. Grading. Requirements for machine strength graded timber and grading machines
BS EN 595:1995 BS EN 595:1995. Timber structures. Test methods. Test of trusses for the determination of strength and deformation behaviour
BS EN 518:1995 BS EN 518:1995. Structural timber. Grading. Requirements for visual strength grading standards
BS EN 384:1995 BS EN 384:1995. Structural timber. Determination of characteristic values of mechanical properties and density
BS EN 596:1995 BS EN 596:1995. Timber structures. Test methods. Soft body impact test of timber framed walls
BS 2A 296:1995, ISO 7913:1994 BS 2A 296:1995, ISO 7913:1994. Bolts and screws, metric. Tolerances of form and position
BS EN 60674-3-4 to 6:1995, IEC 60674-3-4 to 6:1993 BS EN 60674-3-4 to 6:1995, IEC 60674-3-4 to 6:1993. Specification for plastic films for electrical purposes. Specifications for individual materials.
BS EN 60601-2-34:1995, BS 5724-2.34:1995,IEC 60601-2-34:1994 BS EN 60601-2-34:1995, BS 5724-2.34:1995,IEC 60601-2-34:1994. Medical electrical equipment. Particular requirements for safety. Specificati
BS 6068-2.50:1995, ISO 10523:1994 BS 6068-2.50:1995, ISO 10523:1994. Water quality. Physical, chemical and biochemical methods. Determination of pH
BS EN 60244-5:1995, IEC 60244-5:1992 BS EN 60244-5:1995, IEC 60244-5:1992. Methods of measurement for radio transmitters. Performance characteristics of television transmitters
BS ISO 10371:1993 BS ISO 10371:1993. Fibre reinforced plastics. Braided tapes for composite materials reinforcement. Basis for a specification
BS EN ISO 2062:1995 BS EN ISO 2062:1995. Textiles. Yarns from packages. Determination of single-end breaking force and elongation at break
DD ENV 61024-1:1995 DD ENV 61024-1:1995. Protection of structures against lightning. General principles
BS EN 140210:1995 BS EN 140210:1995. Harmonized system of quality assessment for electronic components. Sectional specification: fixed power resistors. Capability approval
DD ENV 1178-1:1995 DD ENV 1178-1:1995. Furniture. Children's high chairs for domestic use. Safety requirements
BS AU 50-1.1.1a:1995, ISO 4000-1:1994 BS AU 50-1.1.1a:1995, ISO 4000-1:1994. Tyres and wheels. Tyres. Car tyres. Specification for metric series tyres
BS AU 50-1.2.1a:1995, ISO 4209-1:1993 BS AU 50-1.2.1a:1995, ISO 4209-1:1993. Tyres and wheels. Tyres. Commercial vehicle tyres. Specification for metric series tyres
BS EN 60684-3-246:1995, IEC 60684-3-246:1992 BS EN 60684-3-246:1995, IEC 60684-3-246:1992. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving.
BS EN 60684-3-123 and 124:1995, IEC 60684-3-123 and 124:1992 BS EN 60684-3-123 and 124:1995, IEC 60684-3-123 and 124:1992. Specification for flexible insulating sleeving. Specification requirements fo
DD ENV 1178-2:1995 DD ENV 1178-2:1995. Furniture. Children's high chairs for domestic use. Test methods
BS EN 60268-12:1995, BS 6840-12:1995,IEC 60268-12:1987 BS EN 60268-12:1995, BS 6840-12:1995,IEC 60268-12:1987. Sound system equipment. Application of connectors for broadcast and similar use
BS EN 450:1995 BS EN 450:1995. Fly ash for concrete. Definitions, requirements and quality control
DC95/561270 DC95/561270. Draft BS ISO 7711-1. Dental rotary instruments. Diamond instruments. Part 1. Shapes, requirements and packaging (identical with ISO/DIS 7711-1)
DC95/561272 DC95/561272. BS ISO 11499. Dental local anaesthetic cartridges (identical with ISO/DIS 11499)
DC95/541093 DC95/541093. ISO/CD 8696. Light gauge metal containers. Aerosol cans. Capacities and related diameters
DC95/205417 DC95/205417. IEC 626-3. Combined flexible materials for electrical insulation. Part 3. Specification for individual materials (identical to 15C/533/CDV). Specification for individual mater
DC94/714808 DC94/714808. Aerospace series. Guide to the design of electromagnetic hazard protection of civil aircraft. Part 1. Theory and threats (BS G 257:Part 1)
DC94/714809 DC94/714809. Aerospace series. Guide to the design of electromagnetic hazard protection of civil aircraft. Part 2. Design guide to protection (BS G 257:Part 2)
DC95/501186 DC95/501186. BS EN ISO 11212-4 Starches and derived products. Determination of heavy metals content. Part 4. Determination of cadmium content by atomic absorption spectrometry with electro
DC95/501185 DC95/501185. BS EN ISO 11212-1 Starches and derived products. Determination of heavy metals content. Part 1. Determination of arsenic content by atomic absorption spectrometry (ISO /DIS 11
DC95/501183 DC95/501183. BS EN ISO 11212-3 Starches and derived products. Determination of heavy metals content. Part 3. Determination of lead content by atomic absorption spectrometry with electrothe
DC95/501184 DC95/501184. BS EN ISO 11212-2 Starches an derived products. Determination of heavy metals content. Part 2. Determination of mercury content byatomic absorption spectrometry (ISO/DIS 11212
BS AU 209-0:1996 BS AU 209-0:1996. Vehicle security. Guide to the application of security devices/systems to vehicles
BS AU 202b:1995 BS AU 202b:1995. Specification for rearward-facing restraint systems for infants, for use in road vehicles
BS EN ISO 1797-2:1995 BS EN ISO 1797-2:1995. Dental rotary instruments. Shanks. Shanks made of plastics
BS EN ISO 2157:1995 BS EN ISO 2157:1995. Dental rotary instruments. Nominal diameters and designation code number
BS EN 1084:1995 BS EN 1084:1995. Plywood. Formaldehyde release classes determined by the gas analysis method
BS 5817-2:1995, IEC 60574-2:1992 BS 5817-2:1995, IEC 60574-2:1992. Specification for audiovisual, video and television equipment and systems. Definitions
BS EN 20105-N01:1995, ISO 105-N01:1993 BS EN 20105-N01:1995, ISO 105-N01:1993. Textiles. Tests for colour fastness. Colour fastness to bleaching: hypochlorite
BS EN 727:1995, BS 2782-11:Method 1103V:1995 BS EN 727:1995, BS 2782-11:Method 1103V:1995. Plastics piping and ducting systems. Thermoplastics pipes and fittings. Determination of Vicat softening temp
BS 903-A64:1995, ISO 2393:1994 BS 903-A64:1995, ISO 2393:1994. Physical testing of rubber. Method for the preparation, mixing and vulcanization of rubber test mixes
BS G 247-2:1995 BS G 247-2:1995. Locator lights for airborne applications. Specification for liferaft lights
BS EN 1772:1995 BS EN 1772:1995. Surface active agents. Determination of wetting power by immersion
BS 1016-113:1995, ISO 540:1995 BS 1016-113:1995, ISO 540:1995. Methods for analysis and testing of coal and coke. Determination of ash fusibility
BS EN 60645-4:1995, IEC 60645-4:1994 BS EN 60645-4:1995, IEC 60645-4:1994. Audiometers. Equipment for extended high-frequency audiometry
BS EN 472:1995 BS EN 472:1995. Pressure gauges. Vocabulary
DC95/122448 DC95/122448. BS 1016 Methods for analysis and testing of coal and coke. Part 106:Ultimate analysis of coal and coke. Section 106.7:Determination of carbon content in carbonates (Gravimetri
DC95/561300 DC95/561300. Cardiovascular implants. Methods of test for heart valve substitutes and requirements for their packaging and labelling. (ISO/DIS 5840)
DC95/520991 DC95/520991. ISO/DIS 11923 Water quality. Determination of suspended solids by filtration through glass-fibre filters
DC95/205427 DC95/205427. IEC 68-2-75 . Environmental testing. Part 2. Tests, Test Ex: Hammer tests (IEC/SC 50A/298/CD)
DC95/122077 DC95/122077. Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method (ISO/DIS 9370)
DC95/707489 DC95/707489. Aerospace series. EN metallic material wrought products. General requirements for product qualification (prEN 2043)
DC95/707068 DC95/707068. Determination of neptunium in nitric acid solutions by molecular absorption spectrophotometry (ISO/DIS 13465)
DC95/705975 DC95/705975. Reciprocating internal combustion engines. Handle starting equipment. Part 2. Method of testing the angle of disengagement (ISO 11102-2)
DC95/705974 DC95/705974. Reciprocating internal combustion engines. Handle starting equipment. Part 1. Safety requirements and tests (ISO 11102-1)
DC95/122752 DC95/122752. Code of practice for the continuous density measurement of petroleum and liquid petroleum products (ISO/DIS 9857)
DC95/122544 DC95/122544. Plastics. Determination of Charpy impact properties. Part 2:Instrumented impact test (ISO/DIS 179-2)
BS EN 1087-1:1995 BS EN 1087-1:1995. Particle boards. Determination of moisture resistance. Particle boards. Determination of moisture resistance. Boil test
BS EN ISO 105-X12:1995 BS EN ISO 105-X12:1995. Textiles. Tests for colour fastness. Colour fastness to rubbing
BS 5691-1:1995, IEC 60216-1:1990 BS 5691-1:1995, IEC 60216-1:1990. Guide for the determination of thermal endurance properties of electrical insulating materials. General guidelines for ageing procedu
BS 5691-5:1995, IEC 60216-5:1990 BS 5691-5:1995, IEC 60216-5:1990. Guide for the determination of thermal endurance properties of electrical insulating materials. Guidelines for the application of the
BS 5626-3.5:1995, IEC 60554-3-5:1984 BS 5626-3.5:1995, IEC 60554-3-5:1984. Cellulosic papers for electrical purposes. Specification for individual materials. Special papers
BS 5689-3.2:1995, IEC 60394-3-2:1988 BS 5689-3.2:1995, IEC 60394-3-2:1988. Varnished fabrics for electrical purposes. Specifications for individual materials. Glass fabric based varnished fabrics with
BS 7826-1:1995, IEC 60493-1:1974 BS 7826-1:1995, IEC 60493-1:1974. Guide for the statistical analysis of ageing test data. Methods based on mean values of normally distributed test results
BS EN 50160:1995 BS EN 50160:1995. Voltage characteristics of electricity supplied by public distribution systems
BS EN 60352-5:1995, IEC 60352-5:1995 BS EN 60352-5:1995, IEC 60352-5:1995. Solderless connections. Solderless press-in connections. General requirements, test methods and practical guidance
DD ENV 61072:1995, IEC 61072:1991 DD ENV 61072:1995, IEC 61072:1991. Methods of test for evaluating the resistance of insulating materials against the initiation of electrical trees
BS EN 386:1995 BS EN 386:1995. Glued laminated timber. Performance requirements and minimum production requirements
BS EN 385:1995 BS EN 385:1995. Finger jointed structural timber. Performance requirements and minimum production requirements
BS EN ISO 2624:1995 BS EN ISO 2624:1995. Copper and copper alloys. Estimation of average grain size
BS EN ISO 2626:1995 BS EN ISO 2626:1995. Copper. Hydrogen embrittlement test
BS EN ISO 196:1995 BS EN ISO 196:1995. Wrought copper and copper alloys. Detection of residual stress. Mercury(I) nitrate test
BS ISO/IEC ISP 10614-6:1995 BS ISO/IEC ISP 10614-6:1995. Information technology. International standardized profile RC. X.25 protocol relaying. Definition of profile RC51.1121, X.25 protocol relaying
BS ISO/IEC 15802-2:1995 BS ISO/IEC 15802-2:1995. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks - common specifications. LAN/
BS 3221-7:1995 BS 3221-7:1995. Medicine measures. Specification for oral syringes delivering doses up to and including 5 ml
BS ISO 8257-1:1987 BS ISO 8257-1:1987. Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials. Designation
BS ISO 8257-2:1990 BS ISO 8257-2:1990. Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS ISO 4894-1:1990 BS ISO 4894-1:1990. Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials. Designation
BS ISO 8789:1994 BS ISO 8789:1994. Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification
BS EN ISO 11210:1995 BS EN ISO 11210:1995. Determination of platinum in platinum jewellery alloys. Gravimetric method after precipitation of diammonium hexachloroplatinate
BS EN ISO 11489:1995 BS EN ISO 11489:1995. Determination of platinum in platinum jewellery alloys. Gravimetric method after reduction with mercury(I) chloride
BS EN ISO 11490:1995 BS EN ISO 11490:1995. Determination of palladium in palladium jewellery alloys. Gravimetric method with dimethyl glyoxime
BS EN 631-2:1995 BS EN 631-2:1995. Materials and articles in contact with foodstuffs. Catering containers. Dimensions of accessories and supports
BS EN 60870-6-601:1995, IEC 60870-6-601:1994 BS EN 60870-6-601:1995, IEC 60870-6-601:1994. Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendati
BS ISO 1275:1995 BS ISO 1275:1995. Double-pitch precision roller chains and sprockets for transmission and conveyors
BS ISO 8434-3:1995 BS ISO 8434-3:1995. Metallic tube connections for fluid power and general use. O-ring face seal fittings
BS ISO 8434-2:1994 BS ISO 8434-2:1994. Metallic tube connections for fluid power and general use. 37° flared fittings
BS EN 986:1995 BS EN 986:1995. Textile floor coverings. Tiles. Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
BS EN 984:1995 BS EN 984:1995. Determination of the mass per unit area of the use surface of needled floor coverings
BS 5691-2:1995, IEC 60216-2:1990 BS 5691-2:1995, IEC 60216-2:1990. Guide for the determination of thermal endurance properties of electrical insulating materials. Choice of test criteria
BS 6893:Part 3:Section 403 to 405:1995, IEC 60684-3-403 to 405:1988 BS 6893:Part 3:Section 403 to 405:1995, IEC 60684-3-403 to 405:1988. Flexible insulating sleeving for electrical purposes. Specifica
BS 6404-8.10:1995, IEC 60404-8-10:1994 BS 6404-8.10:1995, IEC 60404-8-10:1994. Magnetic materials. Individual materials. Specification for magnetic materials (iron and steel) for use in relays
BS EN ISO 8067:1995 BS EN ISO 8067:1995. Flexible cellular polymeric materials. Determination of tear strength
BS EN ISO 4590:1995 BS EN ISO 4590:1995. Cellular plastics. Determination of volume percentage of open and closed cells of rigid materials
BS EN ISO 1923:1995 BS EN ISO 1923:1995. Cellular plastics and rubbers. Determination of linear dimensions
BS EN ISP 11182-1:1995 BS EN ISP 11182-1:1995. Information technology. International standardized profile FOD36. Open document format: Extended document structure. Character, raster graphics and geome
BS EN ISP 11181-1:1995 BS EN ISP 11181-1:1995. Information technology. International standardized profile FOD26. Open document format: Enhanced document structure. Character, raster graphics and geome
BS EN 699:1995 BS EN 699:1995. Fibre ropes for general service. Polypropylene
BS EN 700:1995 BS EN 700:1995. Fibre ropes for general service. Polyethylene
BS EN 1261:1995 BS EN 1261:1995. Fibre ropes for general service. Hemp
DC95/205725 DC95/205725. IEC 1592. Guidelines for panel testing (59/144/CDV)
DC95/707507 DC95/707507. prEN 1251-2. Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1000 litres volume. Part 2. Design, fabrication, inspection and testing. Part 2:Design,
DC95/122841 DC95/122841. Plastics. Evaluation of the action of microorganisms (ISO/DIS 846)
DC95/122785 DC95/122785. Guide on volumetric proving tanks or measures for the dynamic measurement of liquid hydrocarbons (ISO/DIS 12916)
BS M 85:1995, ISO 12118:1995 BS M 85:1995, ISO 12118:1995. Air cargo equipment. Identification of double-stud tie-down fittings having an omnidirectional rated load capacity of 22 250 N (5 000 lbf) or
BS 122-6:1995, ISO 240:1994 BS 122-6:1995, ISO 240:1994. Milling cutters. Specification for dimensions for interchangeability of cutter arbors and cutter mandrels
BS ISO/IEC 13712-3:1995 BS ISO/IEC 13712-3:1995. Information technology. Remote operations. Remote Operations Service Element (ROSE) protocol specification
BS ISO 10303-11:1994 BS ISO 10303-11:1994. Industrial automation systems and integration. Product data representation and exchange. Description methods: the EXPRESS language reference manual
BS ISO/IEC 10030:1995 BS ISO/IEC 10030:1995. Information technology. Telecommunications and information exchange between systems. End System Routeing Information Exchange protocol for use in conjuncti
BS ISO 10303-1:1994 BS ISO 10303-1:1994. Industrial automation systems and integration. Product data representation and exchange. Overview and fundamental principles
BS ISO 10303-41:1994 BS ISO 10303-41:1994. Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources. Fundamentals of product description an
BS ISO/IEC 13712-2:1995 BS ISO/IEC 13712-2:1995. Information technology. Remote operations. OSI realizations. Remote operations service element (ROSE) service definition
BS ISO 10303-31:1994 BS ISO 10303-31:1994. Industrial automation systems and integration. Product data representation and exchange. Conformance testing methodology and framework: general concepts
BS ISO 10303-21:1994 BS ISO 10303-21:1994. Industrial automation systems and integration. Product data representation and exchange. Implementation methods. Clear text encoding of the exchange structur
BS 4480-9:1995, ISO 12307-1:1994 BS 4480-9:1995, ISO 12307-1:1994. Plain bearings: metric series. Checking the outside diameter of wrapped bushes
BS EN 10088-1:1995 BS EN 10088-1:1995. Stainless steels. List of stainless steels
BS EN 381-2:1995 BS EN 381-2:1995. Protective clothing for users of hand-held chain saws. Test methods for leg protectors
BS EN 381-5:1995 BS EN 381-5:1995. Protective clothing for users of hand-held chain saws. Requirements for leg protectors
BS 3F 121:1995 BS 3F 121:1995. Specification for metallic slide fasteners for aerospace purposes
BS ISO/IEC 12087-1:1995 BS ISO/IEC 12087-1:1995. Information technology. Computer graphics and image processing. Image processing and interchange (IPI). Functional specification. Common architecture f
BS ISO/IEC 10026-4:1995 BS ISO/IEC 10026-4:1995. Information technology. Open systems interconnection. Distributed transaction processing. Protocol Implementation Conformance Statement (PICS) proforma
PD 6577:1995 PD 6577:1995. The influence of environmental conditions on the testing of textile materials
BS EN ISO 3385:1995 BS EN ISO 3385:1995. Flexible cellular polymeric materials. Determination of fatigue by constant-load pounding
BS EN ISO 4638:1995 BS EN ISO 4638:1995. Polymeric materials, cellular flexible. Determination of air flow permeability
BS 6893:Part 3:Section 121 and 122:1995, IEC 60684-3-121 and 122:1988 BS 6893:Part 3:Section 121 and 122:1995, IEC 60684-3-121 and 122:1988. Flexible insulating sleeving for electrical purposes. Speci
DD ENV 50185-1:1996 DD ENV 50185-1:1996. Infra-red free air application. General
BS EN 61206:1995, IEC 61206:1993 BS EN 61206:1995, IEC 61206:1993. Ultrasonics. Continuous-wave Doppler systems. Test procedures
BS EN 61220:1995, IEC 61220:1993 BS EN 61220:1995, IEC 61220:1993. Ultrasonics. Fields. Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment
BS EN 61183:1995, IEC 61183:1994 BS EN 61183:1995, IEC 61183:1994. Electroacoustics. Random-incidence and diffuse-field calibration of sound level meters
BS EN 61266:1995, IEC 61266:1994 BS EN 61266:1995, IEC 61266:1994. Ultrasonics. Hand-held probe Doppler foetal heartbeat detectors. Performance requirements and methods of measurement and reporting
BS AU 209-5b:1996 BS AU 209-5b:1996. Vehicle security. Specification for central power locking systems for passenger cars and car derived vehicles
BS AU 209-6a:1996 BS AU 209-6a:1996. Vehicle security. Specification for dead locking systems for passenger cars and car derived vehicles
BS 6222-5:1995 BS 6222-5:1995. Domestic kitchen equipment. Specification for strength requirements and methods of test for peninsular units, island units and breakfast bars
BS EN 60244-8:1995, IEC 60244-8:1993 BS EN 60244-8:1995, IEC 60244-8:1993. Methods of measurement for radio transmitters. Performance characteristics of vestigial-sideband demodulators used for testin
BS EN 60244-9:1995, IEC 60244-9:1993 BS EN 60244-9:1995, IEC 60244-9:1993. Methods of measurement for radio transmitters. Performance characteristics for television transposers
BS 7831:1995, IEC 60370:1971 BS 7831:1995, IEC 60370:1971. Test procedure for thermal endurance of insulating varnishes. Electric strength method
BS 2844:1995, IEC 60212:1971 BS 2844:1995, IEC 60212:1971. Standard conditions for use prior to and during the testing of solid electrical insulating materials
BS 5691-3.1:1995, IEC 60216-3-1:1990 BS 5691-3.1:1995, IEC 60216-3-1:1990. Guide for the determination of thermal endurance properties of electrical insulating materials. Instructions for calculating
BS 7810:Part 1:1995, IEC 61067-1:1991 BS 7810:Part 1:1995, IEC 61067-1:1991. Specification for glass and glass polyester fibre woven tapes. Definitions, classification and general requirements
BS EN 61265:1995, IEC 61265:1995 BS EN 61265:1995, IEC 61265:1995. Electroacoustics. Instruments for measurement of aircraft noise. Performance requirements for systems to measure one-third-octave ban
BS EN 60952-3:1995, IEC 60952-3:1993 BS EN 60952-3:1995, IEC 60952-3:1993. Aircraft batteries. External electrical connectors
BS EN 698:1995 BS EN 698:1995. Fibre ropes for general service. Manila and sisal
BS EN 919:1995 BS EN 919:1995. Fibre ropes for general service. Determination of certain physical and mechanical properties
BS ISO/IEC ISP 10614-2:1995 BS ISO/IEC ISP 10614-2:1995. Information technology. International standardized profile RC. X.25 protocol relaying. LAN subnetwork-dependent, media-independent requirements
BS ISO/IEC ISP 10614-5:1995 BS ISO/IEC ISP 10614-5:1995. Information technology. International standardized profile RC. X.25 protocol relaying. Definition of profile RC51.1111, X.25 protocol relaying
BS ISO/IEC ISP 10614-4:1995 BS ISO/IEC ISP 10614-4:1995. Information technology. International standardized profile RC. X.25 protocol relaying. PSDN subnetwork-dependant, media-dependant requirements
DD ENV 41901:1995 DD ENV 41901:1995. Information technology. Functional standard for profiles Y/11 and Y/12. Character mode terminals on PAD. X.29 over X.25, and X.28 (PSDN character mode access)
BS ISO/IEC ISP 10614-3:1995 BS ISO/IEC ISP 10614-3:1995. Information technology. International standardized profile RC. X.25 protocol relaying. CSMA/CD LAN subnetwork-dependant, media-dependant requir
BS ISO/IEC 10736:1995 BS ISO/IEC 10736:1995. Information technology. Telecommunications and information exchange between systems. Transport layer security protocol
DD ENV 1375-1:1994 DD ENV 1375-1:1994. Identification card systems. Intersector integrated circuit(s) card additional formats. ID-000 card size and physical characteristics
BS EN 955-2:1995, BS 1902-2.1:1995 BS EN 955-2:1995, BS 1902-2.1:1995. Chemical analysis of refractory products. Products containing silica and/or alumina (wet method)
BS EN ISO 845:1995 BS EN ISO 845:1995. Cellular plastics and rubbers. Determination of apparent (bulk) density
BS EN 61000-2-4:1995, IEC 61000-2-4:1994 BS EN 61000-2-4:1995, IEC 61000-2-4:1994. Electromagnetic compatibility (EMC). Environment. Compatibility levels in industrial plants for low-frequency conduct
DC95/122581 DC95/122581. Burning behaviour of textiles and textile products. Vocabulary (ISO/DIS 4880)
DC95/122851 DC95/122851. Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (revision of ISO 1133:1991)
DC95/561473 DC95/561473. Suction catheters for use in the respiratory tract (ISO/DIS 8836)
DC95/707579 DC95/707579. Steel. Determination of high cobalt content. Potentiometric titration method after separation by ion exchange (ISO/DIS 11653)
DC95/707578 DC95/707578. ISO/DIS 13902 Steel and iron. Determination of high sulfur content. Infrared absorption method after combustion in an induction furnace
DC95/707409 DC95/707409. ISO/DIS 7919-5. Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. Part 5. Guidelines for machine sets in hydraulic p
DC95/707007 DC95/707007. Welding and allied processes. Standard guidelines for the specification of underwater fusion welding (IIW-II-2-D-1991). ISO/DIS 14355 (based on IIW document SCUW 124-90)
DC95/541184 DC95/541184. ISO/DIS 5466. Photography. Processed safety and photographic films. Storage practices
DC95/541183 DC95/541183. ISO/DIS 3665. Photography. Intra-oral dental radiographic film. Specification
DC95/501408 DC95/501408. BS 5929. Methods for sensory analysis of food. New Part. General guidance for establishing a sensory profile (ISO/DIS 13299)
DC95/206140 DC95/206140. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). Part 1. General specifications
DC95/104105 DC95/104105. BS 6912 Safety of earth-moving machinery. Part 1. Specification for hydraulic excavator and backhoe loader boom lowering control device (ISO/DIS 8643)
BS EN 60383-2:1995 BS EN 60383-2:1995. Insulators for overhead lines with a nominal voltage above 1000 V. Insulator strings and insulator sets for a.c. systems. Definitions, test methods and acceptanc
BS EN 61237-3:1995, IEC 61237-3:1995 BS EN 61237-3:1995, IEC 61237-3:1995. Broadcast video tape recorders. Methods of measurement. Electrical measurements for analogue component video signals
BS EN 874:1995 BS EN 874:1995. Gas welding equipment. Oxygen/fuel gas blowpipes (cutting machine type) of cylindrical barrel. Type of construction, general specifications, test methods
BS EN 10088-3:1995 BS EN 10088-3:1995. Stainless steels. Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes
BS EN 10088-2:1995 BS EN 10088-2:1995. Stainless steels. Technical delivery conditions for sheet/plate and strip for general purposes
BS EN 188100:1995 BS EN 188100:1995. Harmonized system of quality assessment for electronic components. Sectional specification: single-mode (SM) optical fibre
BS EN 60835-2-5:1995, BS 7573-2.5:1995,IEC 60835-2-5:1993 BS EN 60835-2-5:1995, BS 7573-2.5:1995,IEC 60835-2-5:1993. Methods of measurement for equipment used in digital microwave radio transmission s
BS EN 133200:1995 BS EN 133200:1995. Harmonized system of quality assessment for electronic components. Sectional specification: passive filter units for electromagnetic interference suppression (filt
BS EN 60835-2-7:1995, BS 7573-2.7:1995,IEC 60835-2-7:1994 BS EN 60835-2-7:1995, BS 7573-2.7:1995,IEC 60835-2-7:1994. Methods of measurement for equipment used in digital microwave radio transmission s
BS 7755-3.10:1995, ISO 10693:1995 BS 7755-3.10:1995, ISO 10693:1995. Soil quality. Chemical methods. Determination of carbonate content. Volumetric method
BS 7755-3.7:1995, ISO 11261:1995 BS 7755-3.7:1995, ISO 11261:1995. Soil quality. Chemical methods. Determination of total nitrogen. Modified Kjeldahl method
BS 7755-3.8:1995, ISO 10694:1995 BS 7755-3.8:1995, ISO 10694:1995. Soil quality. Chemical methods. Determination of organic and total carbon after dry combustion (elementary analysis)
BS 7755-3.9:1995, ISO 11466:1995 BS 7755-3.9:1995, ISO 11466:1995. Soil quality. Chemical methods. Extraction of trace elements soluble in aqua regia
BS 3546-5:1995 BS 3546-5:1995. Coated fabrics for use in the manufacture of water penetration resistant clothing. Specification for coated fabrics for immersion suits
BS EN 731:1996 BS EN 731:1996. Gas welding equipment. Air-aspirated hand blowpipes. Specifications and tests
BS EN 730:1995 BS EN 730:1995. Gas welding equipment. Equipment used in gas welding, cutting and allied processes, safety devices for fuel gases and oxygen or compressed air. General specifications, r
BS AU 110a:1995 BS AU 110a:1995. Specification for rubber hoses and hose assemblies for automotive air pressure braking systems
BS EN 922:1995, BS 2782-11:Method 1140A:1995 BS EN 922:1995, BS 2782-11:Method 1140A:1995. Plastics piping and ducting systems. Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U). Specim
BS EN ISO 4651:1995 BS EN ISO 4651:1995. Cellular rubbers and plastics. Determination of dynamic cushioning performance
BS EN 60893-3-7:1995, IEC 60893-3-7:1994 BS EN 60893-3-7:1995, IEC 60893-3-7:1994. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specificat
BS EN 60893-1:1995, IEC 60893-1:1987 BS EN 60893-1:1995, IEC 60893-1:1987. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Definitions, desig
BS ISO 12128:1995 BS ISO 12128:1995. Plain bearings. Lubrication holes, grooves and pockets. Dimensions, types, designation and their application to bearing bushes
BS ISO 6020-2:1991 BS ISO 6020-2:1991. Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series. Compact series
BS ISO 12303:1995 BS ISO 12303:1995. Plain bearings. Quality characteristics. Calculation of machine and process capabilities
BS ISO 12129-2:1995 BS ISO 12129-2:1995. Plain bearings. Tolerances on form and position and surface roughness for shafts, flanges and thrust collars
BS ISO 6020-3:1994 BS ISO 6020-3:1994. Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series. Compact series with bores from 250 mm to 500 mm
BS ISO 10551:1995 BS ISO 10551:1995. Ergonomics of the thermal environment. Assessment of the influence of the thermal environment using subjective judgement scales
BS 2769:Part 2:Section 2.6:1995 BS 2769:Part 2:Section 2.6:1995. Hand-held electric motor-operated tools. Particular requirements. Specification for hammers
BS 2769:Part 2:Section 2.1:1996 BS 2769:Part 2:Section 2.1:1996. Hand-held electric motor-operated tools. Particular requirements. Specification for drills
DC95/561348 DC95/561348. BS ISO 13294. Specification for dental handpieces. Dental air motors (identical with ISO/DIS 13294)
DC95/123046 DC95/123046. Method for the custody transfer of liquefied natural gas on board ship (ISO/DIS 13398)
DC95/707825 DC95/707825. Welding and allied processes. Flux and gas shielded electrical welding processes. Procurement guidelines for consumables (IIW-2-D-1992) (ISO/DIS 14344)
DC95/541253 DC95/541253. ISO/CD 4834. Cinematography. Magnetic sound test films excluding striped release prints. Basic characteristics
BS EN 541:1995 BS EN 541:1995. Aluminium and aluminium alloys. Rolled products for cans, closures and lids. Specifications.
BS 7821-2.1:1995 BS 7821-2.1:1995. Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Distribution transformers with
BS 7821-4:1995 BS 7821-4:1995. Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Determination of the power rating
DC95/206969 DC95/206969. IEC 870-6-702. Telecontrol equipment and systems. Part 6.Telecontrol protocols compatible with ISO standards and ITU-T Recommendations. Section 702.Tase.2. Application profile
DC95/123191 DC95/123191. ISO/DIS 8918. Fluorspar. Technical grades. Chemical composition and physical characteristics
DC95/708133 DC95/708133. Mechanical vibration and shock. Human exposure. Biodynamic coordinate systems (ISO/DIS 8727)
DC95/707906 DC95/707906. Aerospace series. Electrical contacts used in elements of connection. Part 047. Contacts, electrical, female 047 type A, double crimping, class S products standard (prEN 3155-
DC95/707896 DC95/707896. Cryogenic vessels. Transportable, vacuum insulated, of not more than 1000 litres volume. Part 1. Fundamental requirements. prEN 1251-1. Part 1:Fundamental requirements
DC95/707824 DC95/707824. Welding and allied processes. Flux and gas shielded electrical welding processes. Classification of solid wire electrodes for the welding of stainless steel and high alloy ste
DC95/501429 DC95/501429. BS 4317. Methods of test for cereals and pulses. New Part. Measurement of unit pressure loss in one-dimensional air flow through bulk grain (ISO/DIS 4174)
DC95/102936 DC95/102936. prEN 1927-2. Qualitative classification of softwood round timber. Part 2. Pines
DC95/102934 DC95/102934. prEN 1315-2. Dimensional classification. Part 2. Softwood round timber
DC95/561531 DC95/561531. Anaesthetic and respiratory equipment. Conical connectors. Part 1:Conical connectors. Part 1:Cones and sockets (ISO/DIS 5356-1)
DC95/707904 DC95/707904. Aerospace series. Electrical contacts used in elements of connection. Part 045. Contacts, electrical, female 045 type A, double crimping, class T product standard (prEN 3155-0
DC95/561347 DC95/561347. BS ISO 7492. Specification for dental explorers (identical with ISO/DIS 7492)
DC95/122918 DC95/122918. BS 1016. Methods for analysis and testing of coal and coke. Part 106. Ultimate analysis of coal and coke. Section 106.6 Determination of chlorine content. Subsection 106.6.1 D
DC95/206442 DC95/206442. EN 175500. Sectional specification. Cable outlet accessories for connectors, including qualification approval and capability approval (prEN 175500) (possible new British Stand
BS EN ISO 8468:1995 BS EN ISO 8468:1995. Ship's bridge layout and associated equipment. Requirements and guidelines
BS 7821-3:1995 BS 7821-3:1995. Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Supplementary requirements for tra
BS 4054-1:1995, IEC 60315-1:1988 BS 4054-1:1995, IEC 60315-1:1988. Methods of measuring and expressing the performance of radio receivers for sound broadcasting. General considerations and methods of
BS EN 61215:1995, IEC 61215:1993 BS EN 61215:1995, IEC 61215:1993. Crystalline silicon terrestrial photovoltaic (PV) modules. Design qualification and type approval
BS EN 60799:1995 BS EN 60799:1995. Cord sets
BS ISO 8113:1985 BS ISO 8113:1985. Glass containers. Resistance to vertical load. Test method
BS ISO 8162:1985 BS ISO 8162:1985. Glass containers. Tall crown finishes. Dimensions
BS ISO 8163:1985 BS ISO 8163:1985. Glass containers. Shallow crown finishes. Dimensions
BS EN ISO 10528:1995 BS EN ISO 10528:1995. Textiles. Commercial laundering procedure for textile fabrics prior to flammability testing
BS EN ISO 661:1995, BS 684-0.2:1995 BS EN ISO 661:1995, BS 684-0.2:1995. Animal and vegetable fats and oils. Preparation of test sample
BS EN ISO 9222-1:1995, BS 308-1.14:1995 BS EN ISO 9222-1:1995, BS 308-1.14:1995. Technical drawings. Seals for dynamic application. General simplified representation
BS EN ISO 6412-1:1995, BS 308-4.6:1995 BS EN ISO 6412-1:1995, BS 308-4.6:1995. Technical drawings. Simplified representation of pipelines. General rules and orthogonal representation
BS EN ISO 5455:1995, BS 308-1.4:1995 BS EN ISO 5455:1995, BS 308-1.4:1995. Technical drawings. Scales
BS EN ISO 8826-1:1995, BS 308-1.12:1995 BS EN ISO 8826-1:1995, BS 308-1.12:1995. Technical drawings. Roller bearings. General simplified representation
BS EN ISO 9222-2:1995, BS 308-1.15:1995 BS EN ISO 9222-2:1995, BS 308-1.15:1995. Technical drawings. Seals for dynamic application. Detailed simplified representation
BS EN ISO 7083:1995, BS 308-3.6:1995 BS EN ISO 7083:1995, BS 308-3.6:1995. Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions
BS EN ISO 6412-2:1995, BS 308-4.7:1995 BS EN ISO 6412-2:1995, BS 308-4.7:1995. Technical drawings. Simplified representation of pipelines. Isometric projection
BS EN ISO 6433:1995, BS 308-1.8:1995 BS EN ISO 6433:1995, BS 308-1.8:1995. Technical drawings. Item references
BS EN ISO 6413:1995, BS 308-1.9:1995 BS EN ISO 6413:1995, BS 308-1.9:1995. Technical drawings. Representation of splines and serrations
BS 5655-14:1995 BS 5655-14:1995. Lifts and service lifts. Specification for hand-powered service lifts and platform hoists
DD ENV 50166-1:1995 DD ENV 50166-1:1995. Human exposure to electromagnetic fields. Low frequency (0 Hz to 10 kHz)
DD ENV 50166-2:1995 DD ENV 50166-2:1995. Human exposure to electromagnetic fields. High frequency (10 kHz to 300 GHz)
BS 1853-2:1995 BS 1853-2:1995. Tubular fluorescent lamps for general lighting service. Specification for lamps used in the United Kingdom not included in BS EN 60081, BS EN 60901, BS EN 61195 and BS E
PD 6584:1995 PD 6584:1995. Model for a supplier quality assurance assessment questionnaire
BS 6396:1995 BS 6396:1995. Specification for electrical systems in office furniture and office screens
BS EN ISO 8891:1995 BS EN ISO 8891:1995. Dental casting alloys with noble metal content of 25% up to but not including 75%
BS EN ISO 1562:1995 BS EN ISO 1562:1995. Dental casting gold alloys
DD ENV 1186-12:1995 DD ENV 1186-12:1995. Materials and articles in contact with foodstuffs. Plastics. Test methods for overall migration at low temperatures
BS ISO 8395:1995 BS ISO 8395:1995. Cinematography. Test films for the reproduction of 70 mm motion-picture release prints with magnetic stripes. Specifications
BS ISO 5-4:1995 BS ISO 5-4:1995. Photography. Density measurements. Geometric conditions for reflection density
BS ISO 3023:1995 BS ISO 3023:1995. Cinematography. 65 mm and 70 mm unexposed motion-picture film. Cutting and perforating dimensions
DD ENV 1397:1996 DD ENV 1397:1996. Heat exchangers. Hydronic room fan coil units. Test procedure for establishing the performance
BS EN ISO 658:1995, BS 4289-2:1995 BS EN ISO 658:1995, BS 4289-2:1995. Oilseeds. Determination of impurities content
BS EN ISO 664:1995, BS 4289-1:1995 BS EN ISO 664:1995, BS 4289-1:1995. Oilseeds. Reduction of laboratory sample to test sample
BS EN ISO 8892:1995, BS 4325-10:1995 BS EN ISO 8892:1995, BS 4325-10:1995. Oilseed residues. Determination of total residual hexane
BS EN 187102:1995 BS EN 187102:1995. Harmonized system of quality assessment for electronic components. Family specification: optical aerial telecommunication cables
BS EN 50082-2:1995 BS EN 50082-2:1995. Electromagnetic compatibility. Generic immunity standard. Industrial environment
BS EN 60068-2-6:1996, IEC 60068-2-6:1995 BS EN 60068-2-6:1996, IEC 60068-2-6:1995. Environmental testing. Test methods. Test Fc. Vibration (sinusoidal)
BS EN 61069-5:1995, IEC 61069-5:1994 BS EN 61069-5:1995, IEC 61069-5:1994. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Assessment
BS ISO/IEC 8613-2:1995 BS ISO/IEC 8613-2:1995. Information processing. Text and office systems. Office document architecture (ODA) and interchange format. Document structures
BS ISO/IEC 10032:1995 BS ISO/IEC 10032:1995. Information technology. Reference Model of Data Management
BS ISO/IEC 10729-2:1995 BS ISO/IEC 10729-2:1995. Information technology. Open Systems Interconnection. Conformance test suite for the presentation layer. Test suite structure and test purposes for the
BS ISO 10303-42:1994 BS ISO 10303-42:1994. Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources. Geometric and topological representati
BS ISO 10303-43:1994 BS ISO 10303-43:1994. Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources: Representation structures
BS ISO 10303-46:1994 BS ISO 10303-46:1994. Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources: visual presentation
BS ISO 10303-44:1994 BS ISO 10303-44:1994. Industrial automation systems and integration. Product data representation and exchange. Integrated generic resources: Product structure configuration
BS ISO/IEC 11577:1995 BS ISO/IEC 11577:1995. Information technology. Open systems interconnection. Network layer security protocol
BS ISO/IEC ISP 10614-1:1995 BS ISO/IEC ISP 10614-1:1995. Information technology. International standardized profile RC. X.25 protocol relaying. Subnetwork-independent requirements
BS ISO 10303-101:1994 BS ISO 10303-101:1994. Industrial automation systems and integration. Product data representation and exchange. Integrated application resources: Draughting
BS ISO 10303-201:1994 BS ISO 10303-201:1994. Industrial automation systems and integration. Product data representation and exchange. Application protocol: Explicit draughting
BS 5752:Part 15:1995 BS 5752:Part 15:1995. Methods of test for coffee and coffee products. Instant coffee: determination of free and total carbohydrate contents by high performance anion-exchange chro
BS EN ISO 10306:1995 BS EN ISO 10306:1995. Textiles. Cotton fibres. Evaluation of maturity by the air flow method
BS 5655-13:1995 BS 5655-13:1995. Lifts and service lifts. Recommendations for vandal resistant lifts
BS AU 145c:1995 BS AU 145c:1995. Specification for retroreflecting number plates
DC95/123353 DC95/123353. prEN 1555-6. Plastics piping systems for gaseous fuels supply. Polyethylene (PE). Part 6. Recommended practice for installation. Recommended practice for installation
DC95/104739 DC95/104739. Climatic data for building design. Solar radiation. Part 1. Sunpath diagrams (ISO/DIS 6399-1)
DC95/104738 DC95/104738. Climatic data for building design. Solar radiation. Part 2. Formats for tabular presentation (ISO/DIS 6399-2)
DC95/104737 DC95/104737. Climatic data for building design. Calculation and presentation of accumulated time-temperature differences, for assessing energy use in space heating (ISO/DIS 6397)
DC95/104736 DC95/104736. Climatic data for building design. Calculation and presentation of winter external design temperatures (ISO/DIS 6398)
DC95/207382 DC95/207382. IEC 825-3. Safety of laser products. Part 3. Guidance for laser displays and shows. (76/107/CDV)
DC95/207383 DC95/207383. IEC 825-4. Safety of laser products. Part 4. Laser guards. (76/110/CDV)
DC95/207605 DC95/207605. EN 55105. Electromagnetic compatibility immunity requirements for telecommunication terminal equipment
DC95/207095 DC95/207095. IEC 68-2-67. Environmental testing. Part 2:Tests. Test Cy:Damp heat, steady state, accelerated test primarily intended for components (50B/360/DIS)
DC95/561645 DC95/561645. Optics and optical instruments. Ophthalmic optics. Slit-lamp microscopes (ISO/DIS 10939) (prEN 30939)
DC95/501531 DC95/501531. Milk enumeration of somatic cells. Part 1. Microscope method (reference method) (ISO/DIS 13366-1)
DC95/501532 DC95/501532. Milk enumeration of somatic cells. Part 2. Method using an electronic particle counter (ISO/DIS 13366-2)
DC95/501533 DC95/501533. Milk enumeration of somatic cells. Part 3. Fluoro-opto-electronic method (ISO/DIS 13366-3)
DC95/501504 DC95/501504. BS 7820. Analysis of tea and tea products Part 2. Method for the classification of grades by particle size analysis (ISO/DIS 11286)
DC95/501505 DC95/501505. Sampling of milk and milk products. (ISO/DIS 707)
DC95/643675 DC95/643675. British Standard implementation of ISO/IEC DIS 13522-4. Information technology. Coding of multimedia information. Part 4. Registration procedure for MHEG format identifier (IS
DC95/643678 DC95/643678. British Standard implementation of ISO/IEC DIS 10918-3. Information technology. Digital compression and coding of continuous-tone still images. Extensions
DC95/707960 DC95/707960. Aerospace series. Circular optical connector, single channel, coupled by self-locking ring. Operating temperatures 150°C continuous or 200°C continuous, 260°C peak and fire re
BS EN ISO 9237:1995 BS EN ISO 9237:1995. Textiles. Determination of the permeability of fabrics to air
BS ISO 10312:1995 BS ISO 10312:1995. Ambient air. Determination of asbestos fibres. Direct-transfer transmission electron microscopy method
BS ISO 10155:1995 BS ISO 10155:1995. Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications
BS ISO 8297:1994 BS ISO 8297:1994. Acoustics. Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment. Engineering method
BS AU 257:1995 BS AU 257:1995. Code of practice for remanufacture of spark and compression ignition engines
BS EN 313-2:1995 BS EN 313-2:1995. Plywood. Classification and terminology. Terminology
BS 6207-1:1995 BS 6207-1:1995. Mineral insulated cables with a rated voltage not exceeding 750 V. Cables
BS EN ISO 665:1995, BS 4289-3:1995 BS EN ISO 665:1995, BS 4289-3:1995. Oilseeds. Determination of moisture and volatile matter content
BS ISO 10775:1995 BS ISO 10775:1995. Paper, board and pulps. Determination of cadmium content. Atomic absorption spectrometric method
BS ISO 13542:1995 BS ISO 13542:1995. Paper and board. Specification for internal diameters of cores for reels
BS EN 735:1995 BS EN 735:1995. Overall dimensions of rotodynamic pumps. Tolerances
BS EN 733:1995 BS EN 733:1995. End-suction centrifugal pumps, rating with 10 bar with bearing bracket. Nominal duty point, main dimensions, designation system
PD 6579:1995, CR 1749:1995 PD 6579:1995, CR 1749:1995. European scheme for the classification of gas appliances according to the method of evacuation of the products of combustion (types)
BS EN 734:1995 BS EN 734:1995. Side channel pumps PN 40. Nominal duty point, main dimensions, designation system
BS ISO 10654:1993 BS ISO 10654:1993. Light gauge metal containers. Round open-top cans. Cans for liquid products with added gas, defined by their nominal filling volumes
BS 7793-1:1995 BS 7793-1:1995. Vitreous enamel coatings for use on bolted steel panels. Specification for coatings on bolted steel panels for use in agricultural slurry tanks
BS EN 411:1995 BS EN 411:1995. Sanitary tapware. Waste fittings for sinks. General technical specifications
BS ISO/IEC 13963:1995 BS ISO/IEC 13963:1995. Information technology. Data interchange on 90 mm optical disk cartridges. Capacity: 230 megabytes per cartridge
BS ISO/IEC 10164-13:1995 BS ISO/IEC 10164-13:1995. Information technology. Open systems interconnection. Systems management. Summarization function
BS ISO/IEC 13211-1:1995 BS ISO/IEC 13211-1:1995. Information technology. Programming languages. Prolog. General core
PD 6580-2:1995, CENELEC Report R105-002:1994 PD 6580-2:1995, CENELEC Report R105-002:1994. Home and building electronic systems.Technical report 1. Guidelines for the professional installation of Twis
PD 6580-1:1995, CENELEC Report R105-001:1992 PD 6580-1:1995, CENELEC Report R105-001:1992. Home and building electronic systems.Technical report 1. Applications and requirements. Class 1
BS EN 140211:1995 BS EN 140211:1995. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed power resistors. Capability approval
BS EN 61067-3-1:1995, IEC 61067-3-1:1995 BS EN 61067-3-1:1995, IEC 61067-3-1:1995. Glass and glass polyester fibre woven tapes. Specifications for individual materials. Type 1, 2 and 3 tapes
BS EN 60216-3-2:1995, IEC 60216-3-2:1993 BS EN 60216-3-2:1995, IEC 60216-3-2:1993. Guide for the determination of thermal endurance properties of electrical insulating materials. Instructions for calc
BS 5664-3.1:1995, IEC 60455-3-1:1981 BS 5664-3.1:1995, IEC 60455-3-1:1981. Solventless polymerisable resinous compounds used for electrical insulation. Specification for individual materials. Unfilled
BS 7811-4:1995, IEC 60544-4:1985 BS 7811-4:1995, IEC 60544-4:1985. Guide for determining the effects of ionizing radiation on insulating materials. Classification system for service in radiation envir
DD ENV 50204:1996 DD ENV 50204:1996. Radiated electromagnetic field from digital radio telephones. Immunity test
BS 7836:1996, IEC 60450:1974 BS 7836:1996, IEC 60450:1974. Measurement of the average viscometric degree of polymerization of new and aged electric papers
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
