BIS Standards Catalogue
BS EN 60831-1:1994 BS EN 60831-1:1994. Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V. General. Performance, testing and rating. Saf
BS 6607-4:1994, ISO 9524:1993 BS 6607-4:1994, ISO 9524:1993. Tool shanks with 7/24 taper for automatic tool changers. Specification for functional dimensions of front faces of spindle holders for mach
BS ISO 11088:1993 BS ISO 11088:1993. Assembly, adjustment and inspection of an alpine ski-binding-boot (S-B-B) system
BS ISO 11224:1993 BS ISO 11224:1993. Textiles. Nonwovens. Web formation and bonding. Vocabulary
PD 2379:1994 PD 2379:1994. Register of colours of manufacturers' identification threads for electric cables and cords
BS EN 132101:1993 BS EN 132101:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed multilayer ceramic chip capacitors
BS 6293-1:1994, ISO 5855-1:1988 BS 6293-1:1994, ISO 5855-1:1988. Aerospace. MJ threads. General requirements
BS 6293-2:1994, ISO 5855-2:1988 BS 6293-2:1994, ISO 5855-2:1988. Aerospace. MJ threads. Limit dimensions for bolts and nuts
BS 6293-3:1994, ISO 5855-3:1988 BS 6293-3:1994, ISO 5855-3:1988. Aerospace. MJ threads. Limit dimensions for fittings for fluid systems
BS EN 60931-1:1994 BS EN 60931-1:1994. Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. General. Performance, testing and rating.
BS 7457:1994 BS 7457:1994. Specification for polyurethane (PUR) foam systems suitable for stabilization and thermal insulation of cavity walls with masonry or concrete inner and outer leaves
BS 6182-1:1994 BS 6182-1:1994. Intriniscally safe power supplies for use in coal mines. Specification for d.c. power supplies
BS EN 60843-2:1995, BS 7065-2:1994,IEC 60843-2:1992 BS EN 60843-2:1995, BS 7065-2:1994,IEC 60843-2:1992. Helical-scan video tape cassette system using 8 mm magnetic tape. 8 mm video. PCM multi-track a
BS 7164-15.1:1994, ISO 9924-1:1993 BS 7164-15.1:1994, ISO 9924-1:1993. Chemical tests for raw and vulcanized rubber. Method for thermogravimetric determination of the composition of vulcanizates and u
BS 7742:1994, IEC 60844:1988 BS 7742:1994, IEC 60844:1988. Specification for pre-recorded capacitance grooveless videodisc system 50 Hz/625 lines. PAL, on type VHD
BS 7745-1:1994, ISO 10145-1:1993 BS 7745-1:1994, ISO 10145-1:1993. End mills with brazed helical hardmetal tips. Dimensions of end mills with parallel shank
BS 7745-2:1994, ISO 10145-2:1993 BS 7745-2:1994, ISO 10145-2:1993. End mills with brazed helical hardmetal tips. Dimensions of end mills with taper shank
BS 7746:1994, ISO 11469:1993 BS 7746:1994, ISO 11469:1993. Generic identification and marking of plastics products
BS EN 31092:1994, ISO 11092:1993 BS EN 31092:1994, ISO 11092:1993. Textiles. Determination of physiological properties. Measurement of thermal and water-vapour resistance under steady-state conditions
BS QC 750113:1994 BS QC 750113:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: reverse blocking triode thyristors, ambient and ca
BS 7007-5:1994, ISO 1929:1993 BS 7007-5:1994, ISO 1929:1993. Abrasive products. Specification for dimensions, tolerances and designation of abrasive belts
BS 7079:Part F1:1994, ISO 11126-1:1993 BS 7079:Part F1:1994, ISO 11126-1:1993. Preparation of steel substrates before application of paints and related products. Non-metallic blast-cleaning abrasives.
BS 7747:1994, ISO 8380:1993 BS 7747:1994, ISO 8380:1993. Forestry machinery. Portable brush cutters and grass trimmers. Cutting attachment guard strength
BS G 254:1994, ISO 8668-4:1993 BS G 254:1994, ISO 8668-4:1993. Specification for type 2 terminal junction systems
BS M 73:1994, ISO 9666:1993 BS M 73:1994, ISO 9666:1993. Aircraft. Self-propelled lavatory-servicing vehicle. Functional requirements
DD ENV 41220:1994 DD ENV 41220:1994. Information technology. Functional standard for profile A/MH31. Message handling systems (1988 and later). Electronic data interchange messaging service (EDIMS). E
BS 7850-2:1994, ISO 9004-4:1993 BS 7850-2:1994, ISO 9004-4:1993. Total quality management. Guidelines for quality improvement
BS 7755-3.1:1994, ISO 11465:1993 BS 7755-3.1:1994, ISO 11465:1993. Soil quality. Chemical methods. Determination of dry matter and water content on a mass basis by a gravimetric method
BS 7755-2.6:1994, ISO 10381-6:1993 BS 7755-2.6:1994, ISO 10381-6:1993. Soil quality. Sampling. Guidance on the collection, handling and storage of soil for the assessment of aerobic microbial processe
BS 7755-4.2.1:1994, ISO 11268-1:1993 BS 7755-4.2.1:1994, ISO 11268-1:1993. Soil quality. Biological methods. Effects of pollutants on soil fauna. Determination of acute toxicity to earthworms (Eisenia
BS 7755-4.3.1:1994, ISO 11269-1:1993 BS 7755-4.3.1:1994, ISO 11269-1:1993. Soil quality. Biological methods. Effects of pollutants on soil flora. Method for the measurement of inhibition of root growt
BS EN 186000-1:1994 BS EN 186000-1:1994. Harmonized system of quality assessment for electronic components. Generic specification. Connector sets for optical fibres and cables. Requirements, test meth
BS AU 255-1:1994, ISO 6722-3:1993 BS AU 255-1:1994, ISO 6722-3:1993. Road vehicle unscreened low tension cables. Specification for conductor sizes and dimensions for thick walled insulated cables
BS AU 255-2:1994, ISO 6722-4:1993 BS AU 255-2:1994, ISO 6722-4:1993. Road vehicle unscreened low tension cables. Specification for conductor sizes and dimensions for thin walled insulated cables
BS EN ISO 3219:1995, BS 2782-7:Method 730B:1994 BS EN ISO 3219:1995, BS 2782-7:Method 730B:1994. Plastics. Polymers/resins in the liquid state or as emulsions or dispersions. Determination of viscosit
BS 3552:1994, ISO 1213-1:1993 BS 3552:1994, ISO 1213-1:1993. Glossary of coal preparation terms
BS EN 60705:1995, IEC 60705:1988 BS EN 60705:1995, IEC 60705:1988. Methods for measuring the performance of microwave ovens for household and similar purposes
BS 6939:Part 1:1994 BS 6939:Part 1:1994. Recommendations for intermediate bulk containers (IBCs) for dangerous goods. General provisions applicable to all types of IBC
BS 6939:Part 2:1994 BS 6939:Part 2:1994. Recommendations for intermediate bulk containers (IBCs) for dangerous goods. Specific requirements for metal IBCs
BS 6939:Part 3:1994 BS 6939:Part 3:1994. Recommendations for intermediate bulk containers (IBCs) for dangerous goods. Specific requirements for flexible IBCs
BS 6939:Part 4:1994 BS 6939:Part 4:1994. Recommendations for intermediate bulk containers (IBCs) for dangerous goods. Specific requirements for rigid plastics IBCs
BS 6939:Part 5:1994 BS 6939:Part 5:1994. Recommendations for intermediate bulk containers (IBCs) for dangerous goods. Specific requirements for composite IBCs with plastics inner receptacles
BS 6939:Part 6:1994 BS 6939:Part 6:1994. Recommendations for intermediate bulk containers (IBCs) for dangerous goods. Specific requirements for fibreboard IBCs
BS 6939:Part 7:1994 BS 6939:Part 7:1994. Recommendations for intermediate bulk containers (IBCs) for dangerous goods. Specific requirements for wooden IBCs
BS EN 190116:1994 BS EN 190116:1994. Harmonized system of quality assessment for electronic components. Family specification: AC MOS digital integrated circuits
BS 7744:1994, IEC 61245:1993 BS 7744:1994, IEC 61245:1993. Guide to artificial pollution tests on high voltage insulators to be used on d.c. systems
DD ENV 1118:1994 DD ENV 1118:1994. Heat exchangers. Refrigerant cooled liquid coolers. Test procedures for establishing the performance
DD ENV 1216:1994 DD ENV 1216:1994. Heat exchangers. Forced circulation air-cooling and air-heating coils. Test procedures for establishing the performance
BS ISO/IEC 12042:1993 BS ISO/IEC 12042:1993. Information technology. Data compression for information interchange. Binary arithmetic coding algorithm
BS 6955-9:1994, ISO 5347-9:1993 BS 6955-9:1994, ISO 5347-9:1993. Calibration of vibration and shock pick-ups. Method for secondary vibration calibration by comparison of phase angles
BS 6955-10:1994, ISO 5347-10:1993 BS 6955-10:1994, ISO 5347-10:1993. Calibration of vibration and shock pick-ups. Method for primary calibration by high impact shocks
BS 6955-11:1994, ISO 5347-11:1993 BS 6955-11:1994, ISO 5347-11:1993. Calibration of vibration and shock pick-ups. Method of test for transverse vibration sensitivity
BS 6955-12:1994, ISO 5347-12:1993 BS 6955-12:1994, ISO 5347-12:1993. Calibration of vibration and shock pick-ups. Method of test for transverse shock sensitivity
BS 6955-13:1994, ISO 5347-13:1993 BS 6955-13:1994, ISO 5347-13:1993. Calibration of vibration and shock pick-ups. Method of test for base strain sensitivity
BS 6955-14:1994, ISO 5347-14:1993 BS 6955-14:1994, ISO 5347-14:1993. Calibration of vibration and shock pick-ups. Method of test for resonance frequency of undamped accelerometers on a steel block
BS 6955-15:1994, ISO 5347-15:1993 BS 6955-15:1994, ISO 5347-15:1993. Calibration of vibration and shock pick-ups. Method of test for acoustic sensitivity
BS 6955-16:1994, ISO 5347-16:1993 BS 6955-16:1994, ISO 5347-16:1993. Calibration of vibration and shock pick-ups. Method of test for mounting torque sensitivity
BS EN 2591-B8:1994 BS EN 2591-B8:1994. Elements of electrical and optical connection. Test methods. Temperature rise due to rated current
BS EN 2591-B9:1994 BS EN 2591-B9:1994. Elements of electrical and optical connection. Test methods. Current temperature derating
BS EN 24869-3:1994, ISO/TR 4869-3:1989 BS EN 24869-3:1994, ISO/TR 4869-3:1989. Acoustics. Hearing protectors. Simplified method for the measurement of insertion loss of ear-muff type protectors for qu
BS EN 29454-1:1994, ISO 9454-1:1990 BS EN 29454-1:1994, ISO 9454-1:1990. Soft soldering fluxes. Classification and requirements. Classification, labelling and packaging
BS EN 29455-1:1994, ISO 9455-1:1990 BS EN 29455-1:1994, ISO 9455-1:1990. Soft soldering fluxes. Test methods. Determination of non-volatile matter, gravimetric method
BS 4317-30:1994, ISO 8981:1993 BS 4317-30:1994, ISO 8981:1993. Methods of test for cereals and pulses. Identification of wheat varieties by electrophoresis
BS 5354:Part 2:1994, IEC 60763-2:1991 BS 5354:Part 2:1994, IEC 60763-2:1991. Specification for laminated pressboard for electrical purposes. Methods of test
BS 7719:1994 BS 7719:1994. Specification for water-borne emulsion paints for interior use
BS 7722:1994 BS 7722:1994. Specification for surface covered PVC-U extruded hollow profiles with heat welded corner joints for plastics windows
BS EN 678:1994 BS EN 678:1994. Determination of the dry density of autoclaved aerated concrete
BS EN 679:1994 BS EN 679:1994. Determination of the compressive strength of autoclaved aerated concrete
BS EN 680:1994 BS EN 680:1994. Determination of the drying shrinkage of autoclaved aerated concrete
BS EN 2630:1994 BS EN 2630:1994. Aluminium alloy AL-P7009-T74511. Extruded bars and sections a or D ≤ 125 mm with peripheral coarse grain control
BS EN 2632:1994 BS EN 2632:1994. Aluminium alloy AL-P7075-T73511. Extruded bars and sections a or D ≤ 100 mm with peripheral coarse grain control
BS EN 2633:1994 BS EN 2633:1994. Aluminium alloy AL-P2024-T3511. Extruded bars and sections 1,2 mm ≤ a or D ≤ 150 mm with peripheral coarse grain control
BS EN 2636:1994 BS EN 2636:1994. Aluminium alloy AL-P6082-T6. Extruded bars and sections a or D ≤ 200 mm with peripheral coarse grain control
BS EN 29453:1994, ISO 9453:1990 BS EN 29453:1994, ISO 9453:1990. Soft solder alloys. Chemical compositions and forms
BS ISO 4921:1993 BS ISO 4921:1993. Knitting. Basic concepts. Vocabulary
BS ISO/IEC 10885:1993 BS ISO/IEC 10885:1993. Information technology. 356 mm optical disk cartridge for information interchange. Write once
BS 9565:1981 BS 9565:1981. Specification for printed board mounted programming switches of assessed quality: generic data and methods of test
BS 2782-6:Method 630A:1994, ISO 4593:1993 BS 2782-6:Method 630A:1994, ISO 4593:1993. Methods of testing plastics. Dimensional properties. Determination of thickness by mechanical scanning of flexible
BS EN 24217:1994, ISO 4217:1990 BS EN 24217:1994, ISO 4217:1990. Codes for the representation of currencies and funds
BS EN 60094-1:1994, BS 6288-1:1994,IEC 60094-1:1981 BS EN 60094-1:1994, BS 6288-1:1994,IEC 60094-1:1981. Magnetic tape sound recording and reproducing systems. Specification for general conditions and
BS EN 116300:1994 BS EN 116300:1994. Harmonized system of quality assessment for electronic components. Sectional specification: electromechanical all-or-nothing heavy load relays of assessed quality
BS QC 790303:1994, IEC 60748-4-1:1993 BS QC 790303:1994, IEC 60748-4-1:1993. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circ
BS QC 790304:1994, IEC 60748-4-2:1993 BS QC 790304:1994, IEC 60748-4-2:1993. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circ
BS M 72:1994, ISO 8097:1993 BS M 72:1994, ISO 8097:1993. Air cargo equipment. Minimum airworthiness requirements and test conditions for certified air cargo unit load devices
BS M 75:1994, ISO 11075:1993 BS M 75:1994, ISO 11075:1993. Aircraft de-icing/anti-icing Newtonian fluids, ISO type I
BS M 77:1994, ISO 11077:1993 BS M 77:1994, ISO 11077:1993. Self-propelled de-icing/anti-icing vehicles. Functional requirements
BS 5241-1:1994 BS 5241-1:1994. Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site. Specification for sprayed foam thermal insulation applied exte
BS EN 3052:1994 BS EN 3052:1994. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient tempe
BS EN 60998-2-2:1994, IEC 60998-2-2:1991 BS EN 60998-2-2:1994, IEC 60998-2-2:1991. Connecting devices for low-voltage circuits for household and similar purposes. Particular requirements for connectin
BS ISO/IEC TR 10183-2:1993 BS ISO/IEC TR 10183-2:1993. Information technology. Text and office systems. Office Document Architecture (ODA) and interchange format. Technical Report on ISO 8613 implemen
BS ISO 6198:1993 BS ISO 6198:1993. Micrographics. Readers for transparent microforms. Performance characteristics
BS ISO 6196-2:1993 BS ISO 6196-2:1993. Micrographics. Vocabulary. Image positions and methods of recording
BS ISO/IEC 2382-26:1993 BS ISO/IEC 2382-26:1993. Information technology. Vocabulary. Open systems interconnection
BS ISO/IEC 2382-1:1993 BS ISO/IEC 2382-1:1993. Information technology. Vocabulary. Fundamental terms
BS 6068-6.7:1994, ISO 5667-7:1993 BS 6068-6.7:1994, ISO 5667-7:1993. Water quality. Sampling. Guidance on sampling of water and steam in boiler plants
BS 7263-1:1994 BS 7263-1:1994. Precast concrete flags, kerbs, channels, edgings and quadrants. Specification
BS 7371-7:1994 BS 7371-7:1994. Coatings on metal fasteners. Specification for mechanically applied zinc coatings
BS 7735:1994, IEC 60354:1991 BS 7735:1994, IEC 60354:1991. Guide to loading of oil-immersed power transformers
BS EN 458:1994 BS EN 458:1994. Hearing protectors. Recommendations for selection, use, care and maintenance. Guidance document
BS EN 486:1994 BS EN 486:1994. Aluminium and aluminium alloys. Extrusion ingots. Specifications
BS EN 487:1994 BS EN 487:1994. Aluminium and aluminium alloys. Rolling ingots. Specifications
BS EN 1049-2:1994 BS EN 1049-2:1994. Textiles. Woven fabrics. Construction. Methods of analysis. Determination of number of threads per unit length
BS EN 60169-23:1994, IEC 60169-23:1991 BS EN 60169-23:1994, IEC 60169-23:1991. Radio-frequency connectors. Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diamete
BS EN 60169-24:1994, IEC 60169-24:1991 BS EN 60169-24:1994, IEC 60169-24:1991. Radio-frequency connectors. Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable dis
BS EN 60169-25:1994, IEC 60169-25:1992 BS EN 60169-25:1994, IEC 60169-25:1992. Radio-frequency connectors. Two-pole screw (?-20 UNEF) coupled connectors for use with shielded balanced cables having tw
BS EN 60998-2-3:1994, IEC 60998-2-3:1991 BS EN 60998-2-3:1994, IEC 60998-2-3:1991. Connecting devices for low-voltage circuits for household and similar purposes. Particular requirements for connectin
BS 747:1994 BS 747:1994. Specification for roofing felts
BS 3250-2:1994 BS 3250-2:1994. Methods for thermal testing of domestic solid mineral fuel burning appliances with convection. Methods for thermal testing of domestic solid mineral fuel burning applian
BS 7371-10:1994 BS 7371-10:1994. Coatings on metal fasteners. Specification for organic coatings
BS EN 394:1994 BS EN 394:1994. Lifejackets and personal buoyancy aids. Additional items
BS EN 60081:1994 BS EN 60081:1994. Specification for tubular fluorescent lamps for general lighting service
BS 1574:1994 BS 1574:1994. Specification for split pins (inch series)
WD/BS1902 SEC10.2 : 1994 WD/BS1902 SEC10.2 : 1994. Methods of testing refractory materials. Investment casting shell mould systems. Determination of permeability and standard air flow capacity at elev
BS 6002-4.1:1994, ISO 8423:1991 BS 6002-4.1:1994, ISO 8423:1991. Sampling procedures for inspection by variables. Specification for sequential sampling plans for percent nonconforming. Known standard
BS 7258-1:1994 BS 7258-1:1994. Laboratory fume cupboards. Specification for safety and performance
BS 7258-2:1994 BS 7258-2:1994. Laboratory fume cupboards. Recommendations for the exchange of information and recommendations for installation
BS 7258-3:1994 BS 7258-3:1994. Laboratory fume cupboards. Recommendations for selection, use and maintenance
BS 7258-4:1994 BS 7258-4:1994. Laboratory fume cupboards. Method for determination of the containment value of a laboratory fume cupboard
BS 7724:1994 BS 7724:1994. Specification for split pins (metric series)
BS 7739:Part 1:1994, IEC 61243-1:1993 BS 7739:Part 1:1994, IEC 61243-1:1993. Voltage detectors. Specification for capacitive type to be used for voltage exceeding 1 kV a.c.
BS EN 60034-9:1994 BS EN 60034-9:1994. Rotating electrical machines. Noise limits
BS EN 60931-2:1994, IEC 60931-2:1992 BS EN 60931-2:1994, IEC 60931-2:1992. Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Agein
BS EN 61101:1994, IEC 61101:1991 BS EN 61101:1994, IEC 61101:1991. Specification for absolute calibration of hydrophones using the planar scanning technique in the frequency range 0,5 MHz to 15 MHz
BS 7728:1994, IEC 60916:1988 BS 7728:1994, IEC 60916:1988. Mechanical structures for electronic equipment. Terminology
BS CECC 40101:1981 BS CECC 40101:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed low power non-wirewound resistors. Assessm
BS 7669-3:1994 BS 7669-3:1994. Vehicle restraint systems. Guide to the installation, inspection and repair of safety fences
DD ENV 10220:1994 DD ENV 10220:1994. Seamless and welded steel tubes. Dimensions and masses per unit length
BS ISO 10197:1993 BS ISO 10197:1993. Micrographics. Reader-printers for transparent microforms. Characteristics
BS ISO 10290:1993 BS ISO 10290:1993. Textiles. Cotton yarns. Specifications
BS ISO/IEC 11458:1993 BS ISO/IEC 11458:1993. Information technology. Microprocessor systems. VICbus. Inter-crate cable bus
BS 3M 45:Part 1:1994, ISO 3324-1:1993 BS 3M 45:Part 1:1994, ISO 3324-1:1993. Aircraft tyres and rims. Specifications
BS M 71:1994, ISO 4171:1993 BS M 71:1994, ISO 4171:1993. Air cargo equipment. Interline pallets
BS M 76:1994, ISO 11076:1993 BS M 76:1994, ISO 11076:1993. Aerospace. Aircraft de-icing/anti-icing methods with fluids
BS 4571:1994 BS 4571:1994. On-load tap-changers
BS 7377:1994 BS 7377:1994. Specification for step stools
BS ISO/IEC 10038:1993 BS ISO/IEC 10038:1993. Information technology. Telecommunications and information exchange between systems. Local area networks. Media access control (MAC) bridges
BS ISO/IEC 8882-1:1993 BS ISO/IEC 8882-1:1993. Information technology. Telecommunications and information exchange between systems. X.25-DTE conformance testing. General principles
BS ISO/IEC 9041-2:1993 BS ISO/IEC 9041-2:1993. Information technology. Open systems interconnection. Virtual terminal basic class protocol. Protocol implementation conformance statement (PICS proforma
BS ISO/IEC 8802-5:1992 BS ISO/IEC 8802-5:1992. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Token r
BS ISO/IEC 8802-3:1993 BS ISO/IEC 8802-3:1993. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Carrier
BS ISO/IEC 10028:1993 BS ISO/IEC 10028:1993. Information technology. Telecommunications and information exchange between systems. Definition of the relaying functions of a network layer intermediate s
BS ISO/IEC 9574:1992 BS ISO/IEC 9574:1992. Information technology. Provision of the OSI connection-mode network service by packet mode terminal equipment to an integrated services digital network (ISD
BS ISO 10718:1993 BS ISO 10718:1993. Cork stoppers. Enumeration of colony-forming units of yeasts, moulds and bacteria capable of growth in an alcoholic medium
BS ISO/IEC 10173:1991 BS ISO/IEC 10173:1991. Information technology. Integrated services digital network (ISDN) primary access connector at reference points S and T
BS ISO/IEC 9798-3:1993 BS ISO/IEC 9798-3:1993. Information technology. Security techniques. Entity authentication mechanisms. Entity authentication using a public key algorithm
BS ISO/IEC 9796:1991 BS ISO/IEC 9796:1991. Information technology. Security techniques. Digital signature scheme giving message recovery
BS ISO/IEC TR 9577:1990 BS ISO/IEC TR 9577:1990. Information technology. Telecommunications and information exchange between systems. Protocol identification in the network layer
BS ISO 9462:1993 BS ISO 9462:1993. Alpine ski-bindings. Safety requirements and test methods
BS ISO 6196-1:1993 BS ISO 6196-1:1993. Micrographics. Vocabulary. General terms
BS ISO 5626:1993 BS ISO 5626:1993. Paper. Determination of folding endurance
BS ISO 2385:1993 BS ISO 2385:1993. Corkwood in planks, virgin cork, cleanings, cork pieces, corkwood refuse and corkwaste. Sampling to determine moisture content
BS EN 60831-2:1994 BS EN 60831-2:1994. Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Ageing test, self-healing test and destructio
DD ENV 1071-1:1994 DD ENV 1071-1:1994. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by contact probe profilometer
DD ENV 1071-2:1994 DD ENV 1071-2:1994. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by the cap grinding method
DD ENV 725-11:1994 DD ENV 725-11:1994. Advanced technical ceramics. Methods of test for ceramic powders. Determination of the densification on natural sintering
BS 6955-1:1994, ISO 5347-1:1993 BS 6955-1:1994, ISO 5347-1:1993. Calibration of vibration and shock pick-ups. Methods for primary vibration calibration by laser interferometry
BS 6955-2:1994, ISO 5347-2:1993 BS 6955-2:1994, ISO 5347-2:1993. Calibration of vibration and shock pick-ups. Methods for primary shock calibration by light cutting
BS 6955-3:1994, ISO 5347-3:1993 BS 6955-3:1994, ISO 5347-3:1993. Calibration of vibration and shock pick-ups. Methods for secondary vibration calibration
BS 6955-4:1994, ISO 5347-4:1993 BS 6955-4:1994, ISO 5347-4:1993. Calibration of vibration and shock pick-ups. Method for secondary shock calibration
BS 6955-7:1994, ISO 5347-7:1993 BS 6955-7:1994, ISO 5347-7:1993. Calibration of vibration and shock pick-ups. Methods for primary calibration by centrifuge
BS 6955-8:1994, ISO 5347-8:1993 BS 6955-8:1994, ISO 5347-8:1993. Calibration of vibration and shock pick-ups. Method for primary calibration by dual centrifuge
BS 7569:1994 BS 7569:1994. Recommendations for the packaging of dangerous goods for transport
BS 6955-5:1994, ISO 5347-5:1993 BS 6955-5:1994, ISO 5347-5:1993. Calibration of vibration and shock pick-ups. Method for calibration by earth's gravitation
BS 6955-6:1994, ISO 5347-6:1993 BS 6955-6:1994, ISO 5347-6:1993. Calibration of vibration and shock pick-ups. Method for primary vibration calibration at low frequencies
BS 6955-17:1994, ISO 5347-17:1993 BS 6955-17:1994, ISO 5347-17:1993. Calibration of vibration and shock pick-ups. Method of test for fixed temperature sensitivity
BS 6955-18:1994, ISO 5347-18:1993 BS 6955-18:1994, ISO 5347-18:1993. Calibration of vibration and shock pick-ups. Method of test for transient temperature sensitivity
BS 6955-19:1994, ISO 5347-19:1993 BS 6955-19:1994, ISO 5347-19:1993. Calibration of vibration and shock pick-ups. Method of test for magnetic field sensitivity
BS 2830:1994 BS 2830:1994. Specification for suspended access equipment (suspended chairs, traditional steeplejack's seats, work cages, cradles and platforms) for use in the building, engineering cons
BS EN 61094-2:1994, IEC 61094-2:1992 BS EN 61094-2:1994, IEC 61094-2:1992. Specification for measurement microphones. Primary method for pressure calibration of laboratory standard microphones by the
BS EN 61102:1994, IEC 61102:1991 BS EN 61102:1994, IEC 61102:1991. Specification for measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0.5 MHz to 15 MHz
BS EN 100015-2:1994 BS EN 100015-2:1994. Basic specification. Protection of electrostatic sensitive devices. Requirements for low humidity conditions
BS 4727-2:Group 08:1994 BS 4727-2:Group 08:1994. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Electric cables
BS 7007-6:1994, ISO 2235:1993 BS 7007-6:1994, ISO 2235:1993. Abrasive products. Specification for dimensions, tolerances and designation of abrasive sheets
BS ISO/IEC 9579-1:1993 BS ISO/IEC 9579-1:1993. Information technology. Open systems interconnection. Remote database access. Generic model, service and protocol
BS ISO/IEC 9579-2:1993 BS ISO/IEC 9579-2:1993. Information technology. Open systems interconnection. Remote database access. SQL specialization
BS M 74:1994, ISO 6966:1993 BS M 74:1994, ISO 6966:1993. Air cargo equipment. Basic requirements for aircraft loading equipment
BS 4066-3:1994, IEC 60332-3:1992 BS 4066-3:1994, IEC 60332-3:1992. Tests on electric cables under fire conditions. Tests on bunched wires or cables
BS EN 30993-4:1994, ISO 10993-4:1992 BS EN 30993-4:1994, ISO 10993-4:1992. Biological evaluation of medical devices. Selection of tests for interactions with blood
BS EN 50078:1994 BS EN 50078:1994. Torches and guns for arc welding
BS EN 60574-21:1994, BS 5817-21:1994,IEC 60574-21:1992 BS EN 60574-21:1994, BS 5817-21:1994,IEC 60574-21:1992. Specification for audiovisual, video and television equipment and systems. Video tape lea
BS EN 61150:1994, IEC 61150:1992 BS EN 61150:1994, IEC 61150:1992. Alkaline secondary cells and batteries. Sealed nickel-cadmium rechargeable monobloc batteries in button cell design
DD ENV 50141:1994 DD ENV 50141:1994. Electromagnetic compatibility. Basic immunity standard. Conducted disturbances induced by radio-frequency fields. Immunity test
BS ISO 10198:1994 BS ISO 10198:1994. Micrographics. Rotary camera for 16 mm microfilm. Mechanical and optical characteristics
BS ISO/IEC 13421:1993 BS ISO/IEC 13421:1993. Information technology. Data interchange on 12,7 mm, 48-track magnetic tape cartridges. DLT 1 format
BS 4585-17:1994, ISO 3632-2:1993 BS 4585-17:1994, ISO 3632-2:1993. Methods of test for spices and condiments. Test methods specific to saffron
BS 6145:1994, ISO 3632-1:1993 BS 6145:1994, ISO 3632-1:1993. Specification for saffron
BS EN 30993-3:1994, ISO 10993-3:1992 BS EN 30993-3:1994, ISO 10993-3:1992. Biological evaluation of medical devices. Tests for genotoxicity, carcinogenicity and reproductive toxicity
DD ENV 820-1:1994 DD ENV 820-1:1994. Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties. Determination of flexural strength at elevated temperatures
DD ENV 820-3:1994 DD ENV 820-3:1994. Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties. Determination of resistance to thermal shock by water quenching
BS EN 374-1:1994 BS EN 374-1:1994. Protective gloves against chemicals and micro-organisms. Terminology and performance requirements
BS EN 374-2:1994 BS EN 374-2:1994. Protective gloves against chemicals and micro-organisms. Determination of resistance to penetration
BS EN 374-3:1994 BS EN 374-3:1994. Protective gloves against chemicals and micro-organisms. Determination of resistance to permeation by chemicals
BS EN 23166:1994, ISO 3166:1993 BS EN 23166:1994, ISO 3166:1993. Codes for the representation of names of countries
BS ISO/IEC 12248:1993 BS ISO/IEC 12248:1993. Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DATA/DAT-DC format using 60 m and 90 m le
BS ISO/IEC 13481:1993 BS ISO/IEC 13481:1993. Information technology. Data interchange on 130 mm optical disk cartridges. Capacity: 1 gigabyte per cartridge
BS 7729:1994 BS 7729:1994. Specification for instrument transformers. Three-phase voltage transformers for voltage levels having Um up to 52 kV
BS EN 725-3:1994 BS EN 725-3:1994. Advanced technical ceramics. Methods of test for ceramic powders. Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas
BS EN 2089:1994 BS EN 2089:1994. Aluminium alloy AL-P2014A-T6 or T62. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2395:1994 BS EN 2395:1994. Aluminium alloy AL-P2014A-T4 or T42. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 100015-3:1994 BS EN 100015-3:1994. Basic specification. Protection of electrostatic sensitive devices. Requirements for clean room areas
BS EN 100015-4:1994 BS EN 100015-4:1994. Basic specification. Protection of electrostatic sensitive devices. Requirements for high voltage environments
DD ENV 1117:1994 DD ENV 1117:1994. Heat exchangers. Liquid cooled refrigerant condensers. Test procedures for establishing the performance
BS 7733:1994, IEC 60826:1991 BS 7733:1994, IEC 60826:1991. Guide to loading and strength of overhead transmission lines
BS EN 462-1:1994 BS EN 462-1:1994. Non-destructive testing. Image quality of radiographs. Image quality indicators (wire type). Determination of image quality value
BS EN 60335-2-64:1994 BS EN 60335-2-64:1994. Specification for safety of household and similar electrical appliances. Particular requirements. Commercial electric kitchen machines
BS EN 60519-2:1994, IEC 60519-2:1992 BS EN 60519-2:1994, IEC 60519-2:1992. Safety in electroheat installations. Particular requirements for resistance heating equipment
BS EN 61043:1994, IEC 61043:1993 BS EN 61043:1994, IEC 61043:1993. Specification for electroacoustics. Instruments for the measurement of sound intensity. Measurement with pairs of pressure sensing mi
BS EN 61082-2:1994, IEC 61082-2:1993 BS EN 61082-2:1994, IEC 61082-2:1993. Preparation of documents used in electrotechnology. Function-oriented diagrams
BS EN 61205:1994, IEC 61205:1993 BS EN 61205:1994, IEC 61205:1993. Specification for ultrasonics. Dental descaler systems. Measurement and declaration of the output characteristics
DD ENV 1007-2:1994 DD ENV 1007-2:1994. Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of linear density
BS ISO/IEC 12247:1993 BS ISO/IEC 12247:1993. Information technology. 3,81 mm wide magnetic tape cartridge for information interchange. Helical scan recording. DDS format using 60 m and 90 m length tap
BS 7699:Part 4:1994, IEC 60519-4:1977 BS 7699:Part 4:1994, IEC 60519-4:1977. Specification for safety in electroheat installations. Particular requirements for arc furnace installations
BS EN ISO/IEC 11544:1995 BS EN ISO/IEC 11544:1995. Information technology. Coded representation of picture and audio information. Progressive bi-level image compression
BS EN 407:1994 BS EN 407:1994. Protective gloves against thermal risks (heat and/or fire)
BS EN 3026:1994 BS EN 3026:1994. Test method for dry film lubricants. Corrosion test on steel specimens
BS EN 3027:1994 BS EN 3027:1994. Test method for dry film lubricants. Salt spray test
BS EN 3030:1994 BS EN 3030:1994. Test method for dry film lubricants. Solids content
BS EN 3032:1994 BS EN 3032:1994. Test method for dry film lubricants. Thickness measurement
BS EN 61082-3:1994, IEC 61082-3:1993 BS EN 61082-3:1994, IEC 61082-3:1993. Preparation of documents used in eletrotechnology. Connection diagrams, tables and lists
BS ISO/IEC 13549:1993 BS ISO/IEC 13549:1993. Information technology. Data interchange on 130 mm optical disk cartridges. Capacity: 1,3 gigabytes per cartridge
BS 1017-2:1994 BS 1017-2:1994. Sampling of coal and coke. Methods for sampling of coke
BS 7394-2:1994 BS 7394-2:1994. Complete spectacles. Specification for prescription spectacles
BS EN 26847:1994, ISO 6847:1985 BS EN 26847:1994, ISO 6847:1985. Covered electrodes for manual metal arc welding. Deposition of a weld metal pad for chemical analysis
BS EN 10237:1994 BS EN 10237:1994. Metallic materials. Tube. Ring tensile test
BS EN 29999:1994, ISO 9999:1992 BS EN 29999:1994, ISO 9999:1992. Technical aids for disabled persons. Classification
BS G 255:1994, ISO 8668-5:1992 BS G 255:1994, ISO 8668-5:1992. Specification for type 3 terminal junction systems
BS 3376:1994 BS 3376:1994. Specification for open fires burning solid mineral fuels with convection, with or without boilers
BS 4168-2:1994, ISO 4026:1993 BS 4168-2:1994, ISO 4026:1993. Hexagon socket screws and wrench keys: metric series. Specification for hexagon socket set screws with flat point
BS 4184:1994, ISO 8540:1993 BS 4184:1994, ISO 8540:1993. Glossary for power presses, open front mechanical type
BS 4168-3:1994, ISO 4027:1993 BS 4168-3:1994, ISO 4027:1993. Hexagon socket screws and wrench keys: metric series. Specification for hexagon socket set screws with cone point
BS 4168-4:1994, ISO 4028:1993 BS 4168-4:1994, ISO 4028:1993. Hexagon socket screws and wrench keys: metric series. Specification for hexagon socket set screws with dog point
BS 4168-5:1994, ISO 4029:1993 BS 4168-5:1994, ISO 4029:1993. Hexagon socket screws and wrench keys: metric series. Specification for hexagon socket set screws with cup point
BS 7491-3:1994 BS 7491-3:1994. Glass fibre reinforced plastics cisterns for cold water storage. Specification for sectional tanks
BS 7699-8:1994, IEC 60519-8:1983 BS 7699-8:1994, IEC 60519-8:1983. Specification for safety in electroheat installations. Particular requirements for electro-slag remelting furnaces
BS 8217:1994 BS 8217:1994. Code of practice for built-up felt roofing
BS EN 444:1994 BS EN 444:1994. Non-destructive testing. General principles for radiographic examination of metallic materials by X- and gamma-rays
BS EN 3280:1994 BS EN 3280:1994. Bearings, airframe rolling, rigid or self-aligning. Technical specification
BS EN 10234:1994 BS EN 10234:1994. Metallic materials. Tube. Drift expanding test
BS EN 22401:1994, ISO 2401:1972 BS EN 22401:1994, ISO 2401:1972. Covered electrodes. Determination of the efficiency, metal recovery and deposition coefficient
BS EN 28094:1994, ISO 8094:1984 BS EN 28094:1994, ISO 8094:1984. Steel cord conveyor belts. Adhesion strength test of the cover to the core layer
BS EN 60447:1994, IEC 60447:1993 BS EN 60447:1994, IEC 60447:1993. Man-machine interface (MMI). Actuating principles
BS EN 60774-3:1994, IEC 60774-3:1993 BS EN 60774-3:1994, IEC 60774-3:1993. Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS. S-VHS
DD ENV 50140:1994 DD ENV 50140:1994. Electromagnetic compatibility. Basic immunity standard. Radiated radio-frequency electromagnetic field. Immunity test
BS ISO 9902:1993 BS ISO 9902:1993. Textile machinery acoustics. Determination of sound pressure levels and sound power levels emitted by textile machines. Engineering and survey methods
BS 3841-1:1994 BS 3841-1:1994. Determination of smoke emission from manufactured solid fuels for domestic use. General method for determination of smoke emission rate
BS 3841-2:1994 BS 3841-2:1994. Determination of smoke emission from manufactured solid fuels for domestic use. Methods for measuring the smoke emission rate
BS 4783-8:1994 BS 4783-8:1994. Storage, transportation and maintenance of media for use in data processing and information storage. Recommendations for 4 mm and 8 mm helical scan tape cartridges
BS EN 742:1994 BS EN 742:1994. Identification cards. ID-1 card. Location of contacts for cards and devices used in Europe
BS AU 256:1994, ISO 9816:1993 BS AU 256:1994, ISO 9816:1993. Passenger cars. Power-off reactions of a vehicle in a turn. Open-loop test method
BS 7164-11.1:1994 BS 7164-11.1:1994. Chemical tests for raw and vulcanized rubber. Butadiene rubber. Method for determination of microstructure
DD ENV 1994-1-1:1994 DD ENV 1994-1-1:1994. Eurocode 4. Design of composite steel and concrete structures. General rules and rules for buildings (together with United Kingdom National Application Docum
BS 6043-1.10:1994 BS 6043-1.10:1994. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of volatile matter content
BS 6043-1.12:1994 BS 6043-1.12:1994. Method of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of mesophase content
BS 6043-2.12:1994 BS 6043-2.12:1994. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of particle size distribution of fine coke
BS EN 326-1:1994 BS EN 326-1:1994. Wood-based panels. Sampling, cutting and inspection. Sampling and cutting of test pieces and expression of test results
BS EN 29653:1994, ISO 9653:1991 BS EN 29653:1994, ISO 9653:1991. Adhesives. Test method for shear impact strength of adhesive bonds
BS EN 10232:1994 BS EN 10232:1994. Metallic materials. Tube (in full section). Bend test
BS EN 10233:1994 BS EN 10233:1994. Metallic materials. Tube. Flattening test
BS 1679-6:1994 BS 1679-6:1994. Containers for pharmaceutical dispensing. Specification for glass medicine bottles
BS 7164-6.1:1994 BS 7164-6.1:1994. Chemical tests for raw and vulcanized rubber. Methods for determination of volatile matter. Raw rubber
BS EN 10235:1994 BS EN 10235:1994. Metallic materials. Tube. Flanging test
BS EN 60243-3:1994, IEC 60243-3:1993 BS EN 60243-3:1994, IEC 60243-3:1993. Methods of test for electric strength of solid insulating materials. Additional requirements for impulse tests
BS ISO 11438-1:1993 BS ISO 11438-1:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. General requirements and sample dissolution
BS ISO 11438-2:1993 BS ISO 11438-2:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of lead content
BS ISO 11438-3:1993 BS ISO 11438-3:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of antimony content
BS ISO 11438-4:1993 BS ISO 11438-4:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of tin content
BS ISO 11438-5:1993 BS ISO 11438-5:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of tellurium content
BS ISO 11438-6:1993 BS ISO 11438-6:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of thallium content
BS ISO 11438-7:1993 BS ISO 11438-7:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of silver content
BS ISO 11438-8:1993 BS ISO 11438-8:1993. Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method. Determination of indium content
BS EN 22592:1994, BS 2000-403:1994,ISO 2592:1973 BS EN 22592:1994, BS 2000-403:1994,ISO 2592:1973. Methods of test for petroleum and its products. Petroleum products. Determination of flash and fire p
BS EN 22719:1994, BS 2000-404:1994,ISO 2719:1988 BS EN 22719:1994, BS 2000-404:1994,ISO 2719:1988. Methods of test for petroleum and its products. Petroleum products and lubricants. Determination of f
BS EN 25163:1994, BS 2000-236:1994,ISO 5163:1990 BS EN 25163:1994, BS 2000-236:1994,ISO 5163:1990. Methods of test for petroleum and its products. Motor and aviation-type fuels. Determination of knock
BS EN 25164:1994, BS 2000-237:1994,ISO 5164:1990 BS EN 25164:1994, BS 2000-237:1994,ISO 5164:1990. Methods of test for petroleum and its products. Motor fuels. Determination of knock characteristics.
BS EN 26246:1994, BS 2000:Part 131:1994,ISO 6246:1981 BS EN 26246:1994, BS 2000:Part 131:1994,ISO 6246:1981. Methods of test for petroleum and its products. Petroleum products. Motor gasoline and avia
BS EN 27941:1994, BS 2000-405:1994,ISO 7941:1988 BS EN 27941:1994, BS 2000-405:1994,ISO 7941:1988. Methods of test for petroleum and its products. Commercial propane and butane. Analysis by gas chroma
BS EN 10236:1994 BS EN 10236:1994. Metallic materials. Tube. Ring expanding test
BS EN 2032-2:1994 BS EN 2032-2:1994. Metallic materials. Coding of metallurgical condition in delivery condition
DD ENV 725-4:1994 DD ENV 725-4:1994. Advanced technical ceramics. Methods of test for ceramic powders. Determination of oxygen content in aluminium nitride by XRF analysis
BS 5430-6:1994 BS 5430-6:1994. Periodic inspection, testing and maintenance of transportable gas containers (excluding dissolved acetylene containers). Specification for seamless steel and aluminium a
BS ISO/IEC 9979:1991 BS ISO/IEC 9979:1991. Data cryptographic techniques. Procedures for the registration of cryptographic algorithms
BS ISO 3272-4:1994 BS ISO 3272-4:1994. Microfilming of technical drawings and other drawing office documents. Microfilming of drawings of special and exceptional elongated sizes
BS ISO 3272-2:1994 BS ISO 3272-2:1994. Microfilming of technical drawings and other drawing office documents. Quality criteria and control of 35 mm silver gelatin microfilms
BS EN 10218-1:1994 BS EN 10218-1:1994. Steel wire and wire products. General. Test methods
BS 2000:Part 2:1994, ISO 2977:1989 BS 2000:Part 2:1994, ISO 2977:1989. Methods of test for petroleum and its products. Petroleum products and hydrocarbon solvents. Determination of aniline and mixed a
BS 2000-13:1994, ISO 6615:1993 BS 2000-13:1994, ISO 6615:1993. Methods of test for petroleum and its products. Petroleum products. Determination of carbon residue. Conradson method
BS 2000-14:1994, ISO 4262:1993 BS 2000-14:1994, ISO 4262:1993. Methods of test for petroleum and its products. Petroleum products. Determination of carbon residue. Ramsbottom method
BS 2000-375:1994, ISO 10307-1:1993 BS 2000-375:1994, ISO 10307-1:1993. Methods of test for petroleum and its products. Petroleum products. Total sediment in residual fuel oils. Determination by hot fi
BS 2000-390:1994, ISO 10307-2:1993 BS 2000-390:1994, ISO 10307-2:1993. Methods of test for petroleum and its products. Petroleum products. Total sediment in residual fuel oils. Determination using sta
BS 2000:Part 401:1994, ISO 8819:1993 BS 2000:Part 401:1994, ISO 8819:1993. Methods of test for petroleum and its products. Liquefied petroleum gases. Detection of hydrogen sulfide. Lead acetate method
BS 228:1994, ISO 606:1994 BS 228:1994, ISO 606:1994. Specification for short-pitch transmission precision roller chains and chain wheels
BS EN 420:1994 BS EN 420:1994. General requirements for gloves
BS EN 20898-2:1994, ISO 898-2:1992 BS EN 20898-2:1994, ISO 898-2:1992. Mechanical properties of fasteners. Nuts with specified proof load values. Coarse thread
BS EN 122130:1994 BS EN 122130:1994. Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SMB
BS ISO 10550:1994 BS ISO 10550:1994. Micrographics. Planetary camera systems. Test target for checking performance
BS 7767:1994, IEC 61117:1992 BS 7767:1994, IEC 61117:1992. Method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA)
BS EN 388:1994 BS EN 388:1994. Protective gloves against mechanical risks
BS EN 21864:1994, ISO/IEC 1864:1992 BS EN 21864:1994, ISO/IEC 1864:1992. Information technology. Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange. 32 ftpmm (800 ftpi) NRZ1, 1
BS EN 61219:1994 BS EN 61219:1994. Live working. Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device. Lance earthing
BS EN 50019:1994 BS EN 50019:1994. Electrical apparatus for potentially explosive atmospheres. Increased safety "e"
BS 6043-1.11:1994 BS 6043-1.11:1994. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of the atomic C/H ratio of the quinoline-inso
BS 6783-14:1994, ISO 11436:1993 BS 6783-14:1994, ISO 11436:1993. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for the determination of total boron content of nickel, and nick
BS 7762:1994, ISO 12302:1993 BS 7762:1994, ISO 12302:1993. Plain bearings. Quality characteristics. Statistical process control (SPC)
BS EN 29692:1994, ISO 9692:1992 BS EN 29692:1994, ISO 9692:1992. Specification for metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding. Joint preparations for stee
BS ISO/IEC 12246:1993 BS ISO/IEC 12246:1993. Information technology. 8 mm wide magnetic tape cartridge dual azimuth format for information interchange. Helical scan recording
DD ENV 1259-1:1994 DD ENV 1259-1:1994. Single burner gas fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters. Requirements and test methods for establishin
BS AU 50-1.5.1:1994 BS AU 50-1.5.1:1994. Tyres and wheels. Tyres. Industrial vehicle tyres. Specification for code-designated series tyres
BS 2468-1:1994 BS 2468-1:1994. Glossary of terms and classification relating to agricultural machinery and implements. Power and tractive units
BS 2918:Part 1:1994 BS 2918:Part 1:1994. Methods of test for electric strength of solid insulating materials. Tests at power frequencies
BS 2918-2:1994, IEC 60243-2:1990 BS 2918-2:1994, IEC 60243-2:1990. Methods of test for electric strength of solid insulating materials. Additional requirements for tests using direct voltage
BS 7371-4:1994 BS 7371-4:1994. Coatings on metal fasteners. Specification for electroplated nickel, nickel/chromium and copper/nickel/chromium coatings
BS EN 21942-4:1994, ISO 1942-4:1989 BS EN 21942-4:1994, ISO 1942-4:1989. Dental vocabulary. Dental equipment
BS EN 60335-2-67:1994, IEC 60335-2-67:1992 BS EN 60335-2-67:1994, IEC 60335-2-67:1992. Specification for safety of household and similar electrical appliances. Particular requirements. Floor treatment
BS EN 60867:1994, IEC 60867:1993 BS EN 60867:1994, IEC 60867:1993. Insulating liquids. Specifications for unused liquids based on synthetic aromatic hydrocarbons
BS EN 61129:1994, IEC 61129:1992 BS EN 61129:1994, IEC 61129:1992. Specification for alternating current earthing switches. Induced current switching
BS AU 210-2:1994 BS AU 210-2:1994. Drawbars for caravans and light trailers. Specification for the design of aluminium drawbars and chassis
BS EN 60335-2-68:1994, IEC 60335-2-68:1992 BS EN 60335-2-68:1994, IEC 60335-2-68:1992. Specification for safety of household and similar electrical appliances. Particular requirements. Spray extractio
BS 7455-9:1994, ISO 7530-9:1993 BS 7455-9:1994, ISO 7530-9:1993. Analysis of nickel alloys by flame atomic absorption spectrometry. Method for determination of vanadium
PD 6537-2:1994 PD 6537-2:1994. Variability of methods of test for textiles and reports of inter-laboratory trials on certain methods. Phase 2. BS 3320, BS 2010 and BS 1932
BS 6783-15:1994, ISO 11433:1993 BS 6783-15:1994, ISO 11433:1993. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for the determination of titanium in nickel alloys by diantipyry
BS 7666-2:1994 BS 7666-2:1994. Spatial data-sets for geographical referencing. Specification for a land and property Gazetteer
BS 7666-3:1994 BS 7666-3:1994. Spatial data-sets for geographical referencing. Specification for addresses
BS 7738-1:1994 BS 7738-1:1994. Specification for information systems products using SSADM (Structured Systems Analysis and Design Method). Implementation of SSADM version 4
BS EN 26789:1994, ISO 6789:1992 BS EN 26789:1994, ISO 6789:1992. Assembly tools for screws and nuts. Hand torque tools. Requirements and test methods
BS EN 10210-1:1994 BS EN 10210-1:1994. Hot finished structural hollow sections of non-alloy and fine grain structural steels. Technical delivery requirements
BS EN 61168:1994, BS 5724-3.129:1994,IEC 61168:1993 BS EN 61168:1994, BS 5724-3.129:1994,IEC 61168:1993. Medical electrical equipment. Particular requirements for performance. Methods of declaring fun
BS 5724-3.129:Supplement No. 1:1994, IEC 61170:1993 BS 5724-3.129:Supplement No. 1:1994, IEC 61170:1993. Medical electrical equipment. Particular requirements for performance. Methods of declaring fun
BS EN 30993-5:1994, ISO 10993-5:1992 BS EN 30993-5:1994, ISO 10993-5:1992. Biological evaluation of medical devices. Tests for cytotoxicity, in vitro methods
BS EN 60252:1994 BS EN 60252:1994. A.C. motor capacitors
BS EN 61198:1994, IEC 61198:1993 BS EN 61198:1994, IEC 61198:1993. Mineral insulating oils. Methods for the determination of 2-furfural and related compounds
BS EN 61213:1994, IEC 61213:1993 BS EN 61213:1994, IEC 61213:1993. Analogue audio recording on video tape. Polarity of magnetization
BS 7763:1994, ISO 10753:1994 BS 7763:1994, ISO 10753:1994. Method of assessment of the liability to breakdown in water of materials associated with coal seams
BS EN 2858-1:1994 BS EN 2858-1:1994. Titanium and titanium alloys. Forging stock and forgings. Technical specifications. General requirements
BS EN 2858-2:1994 BS EN 2858-2:1994. Titanium and titanium alloys. Forging stock and forgings. Technical specification. Forging stock
BS EN 2858-3:1994 BS EN 2858-3:1994. Titanium and titanium alloys. Forging stock and forgings. Technical specifications. Pre-production and production forgings
BS EN 3055:1994 BS EN 3055:1994. Bearings, airframe rolling. Single row self-aligning roller bearings in corrosion resisting steel. Dimensions and loads
BS EN 3056:1994 BS EN 3056:1994. Bearings, airframe rolling. Rigid double row ball bearings in steel. Dimensions and loads
BS EN 3057:1994 BS EN 3057:1994. Bearings, airframe rolling. Rigid double row ball bearings in steel, cadmium plated. Dimensions and loads
BS EN 3058:1994 BS EN 3058:1994. Bearings, airframe rolling. Rigid double row ball bearings in corrosion resisting steel. Dimensions and loads
BS 6546:1994, ISO 7228:1993 BS 6546:1994, ISO 7228:1993. Specification for tracheal tube connectors
BS CECC 90115:1994 BS CECC 90115:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: digital gate array integrated circuits
BS EN 29008:1994, ISO 9008:1991 BS EN 29008:1994, ISO 9008:1991. Glass bottles. Verticality. Test method
BS EN 29009:1994, ISO 9009:1991 BS EN 29009:1994, ISO 9009:1991. Glass containers. Height and non-parallelism of finish with reference to container base. Test methods
BS EN 29885:1994, ISO 9885:1991 BS EN 29885:1994, ISO 9885:1991. Wide-mouth glass containers. Deviation from flatness of top sealing surface. Test methods
BS 5572:1994 BS 5572:1994. Code of practice for sanitary pipework
BS 7370-2:1994 BS 7370-2:1994. Grounds maintenance. Recommendations for the maintenance of hard areas (excluding sports surfaces)
BS 3130-5:1994 BS 3130-5:1994. Glossary of packaging terms. Plastics and flexible packaging (excluding paper)
BS 7691:1994 BS 7691:1994. Methods for testing resistance to environmental conditions of electronic equipment used in agriculture and horticulture
BS EN 3053:1994 BS EN 3053:1994. Bearings, airframe rolling. Single row self-aligning roller bearings in steel. Dimensions and loads
BS EN 3054:1994 BS EN 3054:1994. Bearings, airframe rolling. Single row self-aligning roller bearings in steel, cadmium plated. Dimensions and loads
BS EN 60774-1:1994, IEC 60774-1:1994 BS EN 60774-1:1994, IEC 60774-1:1994. Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS. VHS and compact VHS video cassette
BS EN 60934:1994 BS EN 60934:1994. Specification for circuit-breakers for equipment (CBE)
BS EN 421:1994 BS EN 421:1994. Protective gloves against ionizing radiation and radioactive contamination
BS EN 31426:1994, ISO 11426:1993 BS EN 31426:1994, ISO 11426:1993. Determination of gold in gold jewellery alloys. Cupellation method (fire assay)
BS EN 31427:1994, ISO 11427:1993 BS EN 31427:1994, ISO 11427:1993. Determination of silver in silver jewellery alloys. Volumetric (potentiometric) method using potassium bromide
BS 3682-1:1994 BS 3682-1:1994. Specification for railway brake hose. Specification for compressed air brake hose
BS 6130-2:1994 BS 6130-2:1994. Hose and hose assemblies for asphalt and bitumen. Specification for rubber hose and hose assemblies
BS EN 30042:1994, ISO 10042:1992 BS EN 30042:1994, ISO 10042:1992. Arc-welded joints in aluminium and its weldable alloys. Guidance on quality levels for imperfections
BS EN 60961:1994, IEC 60961:1993 BS EN 60961:1994, IEC 60961:1993. Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type L
BS 5760-2:1994 BS 5760-2:1994. Reliability of systems, equipment and components. Guide to the assessment of reliability
BS EN 578:1994, BS 2782-11:Method 1104A:1994 BS EN 578:1994, BS 2782-11:Method 1104A:1994. Plastics piping systems. Plastics pipes and fittings. Determination of the opacity
BS EN 579:1994, BS 2782-11:Method 1106E:1994 BS EN 579:1994, BS 2782-11:Method 1106E:1994. Plastics piping systems. Crosslinked polyethylene (PE-X) pipes. Determination of degree of crosslinking by so
BS EN 580:1994, BS 2782-11:Method 1105D:1994 BS EN 580:1994, BS 2782-11:Method 1105D:1994. Plastics piping systems. Unplasticized poly (vinyl chloride) (PVC-U) pipes. Test method for the resistance to
DD ENV 190000-6:1994 DD ENV 190000-6:1994. Generic specification: monolithic integrated circuits. Procedure for approval and quality management
BS EN 3282:1994 BS EN 3282:1994. Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 8 and 9. Dimensions and loads
BS EN 3285:1994 BS EN 3285:1994. Bearings; airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 0 and 2. Normal clearance category. Dimensions and loads
BS EN 3288:1994 BS EN 3288:1994. Bearings, airframe rolling. Double row self-aligning ball bearings in steel, cadmium plated. Diameter series 2. Dimensions and loads
BS EN 3291:1994 BS EN 3291:1994. Bearings, airframe rolling. Single row self-aligning roller bearings in steel, cadmium plated. Diameter series 3 and 4. Dimensions and loads
BS EN 27201-2:1994, ISO 7201-2:1991 BS EN 27201-2:1994, ISO 7201-2:1991. Fire protection. Fire extinguishing media. Halogenated hydrocarbons. Code of practice for safe handling and transfer procedures
BS EN 61234-1:1994, IEC 61234-1:1994 BS EN 61234-1:1994, IEC 61234-1:1994. Method of test for hydrolytic stability of electrical insulating materials. Method of test for hydrolytic stability of electr
BS EN ISO 9001:1994 BS EN ISO 9001:1994. Quality systems. Model for quality assurance in design, development, production, installation and servicing
BS EN ISO 9002:1994 BS EN ISO 9002:1994. Quality systems. Model for quality assurance in production, installation and servicing
BS EN ISO 9003:1994 BS EN ISO 9003:1994. Quality systems. Model for quality assurance in final inspection and test
BS ISO/IEC 2382-23:1994 BS ISO/IEC 2382-23:1994. Information technology. Vocabulary. Text processing
BS ISO/IEC 9637-1:1994 BS ISO/IEC 9637-1:1994. Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Data stream binding. Character encoding
BS 7769-1.2:1994, IEC 60287-1-2:1993 BS 7769-1.2:1994, IEC 60287-1-2:1993. Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses. Sh
BS EN 144000:1994 BS EN 144000:1994. Harmonized system of quality assessment for electronic components. Generic specification: directly heated positive temperature coefficient thermistors typically ma
BS 6913-9:1994, ISO 6405-2:1993 BS 6913-9:1994, ISO 6405-2:1993. Operation and maintenance of earth-moving machinery. Specification for specific symbols for machines, equipment and accessories
BS ISO 9923:1994 BS ISO 9923:1994. Micrographics. Transparent A6 microfiche. Image arrangements
BS EN 460:1994 BS EN 460:1994. Durability of wood and wood-based products. Natural durability of solid wood. Guide to the durability requirements for wood to be used in hazard classes
BS EN 60495:1994, IEC 60495:1993 BS EN 60495:1994, IEC 60495:1993. Single sideband power-line carrier terminals
BS 5911-103:1994 BS 5911-103:1994. Precast concrete pipes, fittings and ancillary products. Specification for prestressed non-pressure pipes and fittings with flexible joints
BS 7164-22.1:1994 BS 7164-22.1:1994. Chemical tests for raw and vulcanized rubber. Determination of chlorine content. Parr bomb method
BS 5385-5:1994 BS 5385-5:1994. Wall and floor tiling. Code of practice for the design and installation of terrazzo tile and slab, natural stone and composition block floorings
BS 7164-13:1994 BS 7164-13:1994. Chemical tests for raw and vulcanized rubber. Method for determination of total hydrocarbon content
BS EN 643:1994 BS EN 643:1994. List of European standard qualities of waste paper
BS 6913-10:1994, ISO 6302:1993 BS 6913-10:1994, ISO 6302:1993. Operation and maintenance of earth-moving machinery. Specification for drain, fizz and level plugs
BS 6913-11:1994, ISO 11862:1993 BS 6913-11:1994, ISO 11862:1993. Operation and maintenance of earth-moving machinery. Specification for auxiliary starting aid electrical connector
BS EN 462-2:1994 BS EN 462-2:1994. Non-destructive testing. Image quality of radiographs. Image quality indicators (step/hole type). Determination of image quality value
BS EN ISO 3251:1995, BS 3900-B18:1994 BS EN ISO 3251:1995, BS 3900-B18:1994. Paints and varnishes. Determination of non-volatile matter of paints, varnishes and binders for paints and varnishes
BS 1983-2:1994, ISO 3089:1991 BS 1983-2:1994, ISO 3089:1991. Chucks for machine tools and portable power tools. Specification for workholding chucks, power operated
BS 1983-6:1994, ISO 9401:1991 BS 1983-6:1994, ISO 9401:1991. Chucks for machine tools and portable power tools. Specification for jaw serrations, interfaces and tee nuts
BS 1983-7:1994, ISO 3442:1991 BS 1983-7:1994, ISO 3442:1991. Chucks for machine tools and portable power tools. Specification for workholding chucks with 2-piece jaws, power operated
BS EN 471:1994 BS EN 471:1994. Specification for high-visibility warning clothing
BS CECC 00114:Part 6:1994 BS CECC 00114:Part 6:1994. Rule of procedure 14. Quality assessment procedures. Technology approval of electronic component manufacturers
BS EN 124:1994 BS EN 124:1994. Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control
BS 6069:Part 2:1983, ISO 4225-1980 BS 6069:Part 2:1983, ISO 4225-1980. Characterization of air quality. Glossary
BS 6069-5.1:1994, ISO 8756:1994 BS 6069-5.1:1994, ISO 8756:1994. Characterization of air quality. General. Handling of temperature, pressure and humidity data
BS EN ISO 10350:1995 BS EN ISO 10350:1995. Plastics. Acquisition and presentation of comparable single-point data
BS 7252-7:1994, ISO 5832-7:1994 BS 7252-7:1994, ISO 5832-7:1994. Metallic materials for surgical implants. Specification for cobalt-chromium-nickel-molybdenum-iron alloy
BS 7778:1994, ISO 11318:1993 BS 7778:1994, ISO 11318:1993. Specification for connector assembly DF-1 for implantable cardiac defibrillators
BS EN 491:1994 BS EN 491:1994. Concrete roofing tiles and fittings. Test methods
BS EN 28877:1994, ISO/IEC 8877:1992 BS EN 28877:1994, ISO/IEC 8877:1992. Information technology. Telecommunications and information exchange between systems. Interface connector and contact assignment
BS ISO/IEC 3309:1993 BS ISO/IEC 3309:1993. Information technology. Telecommunications and information exchange between systems. High-level data link control (HDLC) procedures. Frame structure
BS ISO/IEC 11569:1993 BS ISO/IEC 11569:1993. Information technology. Telecommunications and information exchange between systems. 26-pole interface connector mateability dimensions and contact number
BS 4005:1984 BS 4005:1984. Single use, sterilized surgical rubber gloves
BS 341-1:1962 BS 341-1:1962. Transportable gas container valves. Valves with taper stems (excluding valves used for breathing and medical purposes)
BS 341-2:1963 BS 341-2:1963. Transportable gas container valves. Valves with taper stems for use with breathing apparatus
BS A 303:1994, ISO 3185:1993 BS A 303:1994, ISO 3185:1993. Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less
BS A 305:1994, ISO 7961:1994 BS A 305:1994, ISO 7961:1994. Bolts. Test methods
BS A 306:1994, ISO 8280:1993 BS A 306:1994, ISO 8280:1993. Rivets, solid, universal head, metallic material, with or without surface treatment. Dimensions
BS A 307:1994, ISO 9254:1993 BS A 307:1994, ISO 9254:1993. Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes le
BS A 308:1994, ISO 9255:1993 BS A 308:1994, ISO 9255:1993. Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than
BS A 309:1994, ISO 9256:1993 BS A 309:1994, ISO 9256:1993. Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes
DD ENV 725-2:1994 DD ENV 725-2:1994. Advanced technical ceramics. Methods of test for ceramic powders. Determination of impurities in barium titanate
BS 2C 19:1994, ISO 9939:1994 BS 2C 19:1994, ISO 9939:1994. Specification for pressure re-oiling connection (new type)
BS 4211:1994 BS 4211:1994. Specification for ladders for permanent access to chimneys, other high structures, silos and bins
BS 5202-15:1994, ISO 10362-2:1994 BS 5202-15:1994, ISO 10362-2:1994. Methods for chemical analysis of tobacco and tobacco products. Determination of water in smoke condensates of cigarettes (Karl Fisc
BS 6069:Part 1:1981, ISO 4226-1980 BS 6069:Part 1:1981, ISO 4226-1980. Methods for characterization of air quality. Units of measurement
BS 7000-3:1994 BS 7000-3:1994. Design management systems. Guide to managing service design
BS EN 3281:1994 BS EN 3281:1994. Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 8 and 9. Dimensions and loads
BS EN 3283:1994 BS EN 3283:1994. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 8 and 9. Dimensions and loads
BS EN 3284:1994 BS EN 3284:1994. Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 0 and 2. Normal clearance category. Dimensions and loads
BS EN 50098-1:1994 BS EN 50098-1:1994. Customer premises cabling for information technology. ISDN basic access
BS EN 61254:1994, IEC 61254:1993 BS EN 61254:1994, IEC 61254:1993. Electric shavers for household use. Methods for measuring the performance
DD ENV 1094-7:1994 DD ENV 1094-7:1994. Insulating refractory products. Methods of test for ceramic fibre products
BS 6262-4:1994 BS 6262-4:1994. Glazing for buildings. Safety related to human impact
BS 7772:1994, ISO 12306:1994 BS 7772:1994, ISO 12306:1994. Plain bearings. Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes
BS 7774:1994, ISO 3800:1993 BS 7774:1994, ISO 3800:1993. Threaded fasteners. Axial load fatigue testing. Test methods and evaluation of results
BS EN 765:1994 BS EN 765:1994. Sacks for the transport of food aid. Sacks made of woven polyolefin fabric other than polypropylene only
BS EN 766:1994 BS EN 766:1994. Sacks for the transport of food aid. Sacks made of jute fabric
BS EN 767:1994 BS EN 767:1994. Sacks for the transport of food aid. Sacks made of woven jute/polyolefin fabric
BS EN 768:1994 BS EN 768:1994. Sacks for the transport of food aid. Sacks made of lined cotton fabric
BS EN 10002-3:1995 BS EN 10002-3:1995. Tensile testing of metallic materials. Calibration of force proving instruments used for the verification of uniaxial testing machines
BS 5760-11:1994, IEC 60300-3-2:1993 BS 5760-11:1994, IEC 60300-3-2:1993. Reliability of systems, equipment and components. Collection of reliability, availability, maintainability and maintenance supp
BS 7768:1994 BS 7768:1994. Recommendations for management of optical disk (WORM) systems for the recording of documents that may be required as evidence
BS EN 100114-1/Issue 2:1994 BS EN 100114-1/Issue 2:1994. Rule of Procedure 14. Quality assessment procedures. Approval of manufacturers and other organizations
BS EN 3286:1994 BS EN 3286:1994. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 0 and 2. Normal clearance category. Dimensions and loads
BS EN 3287:1994 BS EN 3287:1994. Bearings, airframe rolling. Double row self-aligning ball bearings in steel. Diameter series 2. Dimensions and loads
BS EN 3289:1994 BS EN 3289:1994. Bearings, airframe rolling. Double row self-aligning ball bearings in corrosion resisting steel. Diameter series 2. Dimensions and loads
BS EN 3290:1994 BS EN 3290:1994. Bearings, airframe rolling. Single row self-aligning roller bearings in steel. Diameter series 3 and 4. Dimensions and loads
BS EN 3292:1994 BS EN 3292:1994. Bearings, airframe rolling. Single row self-aligning roller bearings in corrosion resisting steel. Diameter series 3 and 4. Dimensions and loads
BS ISO/IEC TR 10182:1993 BS ISO/IEC TR 10182:1993. Information technology. Programming languages, their environments and system software interfaces. Guidelines for language bindings
BS EN ISO 3743-1:1995 BS EN ISO 3743-1:1995. Acoustics. Determination of sound power levels of noise sources. Engineering methods for small, movable sources in reverberant fields. Comparison for hard-
BS 7749:1994, IEC 60397:1972,IEC 60397A:1975 BS 7749:1994, IEC 60397:1972,IEC 60397A:1975. Guide to test methods for batch furnaces with metallic heating resistors
BS EN 350-1:1994 BS EN 350-1:1994. Durability of wood and wood-based products. Natural durability of solid wood. Guide to the principles of testing and classification of natural durability of wood
BS EN 350-2:1994 BS EN 350-2:1994. Durability of wood and wood-based products. Natural durability of solid wood. Guide to natural durability and treatability of selected wood species of importance in
BS EN 60244-12-2:1994, IEC 60244-12-2:1989 BS EN 60244-12-2:1994, IEC 60244-12-2:1989. Methods of measurement for radio transmitters. Guideline for drawing up descriptive leaflets for transmitters and
BS ISO/IEC 4335:1993 BS ISO/IEC 4335:1993. Information technology. Telecommunications and information exchange between systems. High level data link control (HDLC) procedures. Elements of procedures
BS EN 719:1994 BS EN 719:1994. Welding co-ordination. Tasks and responsibilities
BS 3066:1995 BS 3066:1995. Specification for engineers' cold chisels and allied tools
BS ISO/IEC 8482:1994 BS ISO/IEC 8482:1994. Information technology. Telecommunications and information exchange between systems. Twisted pair multipoint interconnections
BS 6010-3:1994, ISO 3228:1993 BS 6010-3:1994, ISO 3228:1993. Rolling bearings. Bearings with speherical outside surface and extended inner ring width. Specification for dimensions of cast and pressed
DD ENV 41113:1994 DD ENV 41113:1994. Information technology. Functional standard for profiles T/C 4311 and T/D 4311. ISDN (public/private). Packet mode service. D-channel. Virtual call (VC)
DD ENV 41217:1994 DD ENV 41217:1994. Information technology. Functional standard for profile A/DI31. Directory. Behaviour of DUAs for distributed operations
BS A 304:1994, ISO 3203:1993 BS A 304:1994, ISO 3203:1993. Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength class
DD ENV 1007-4:1994 DD ENV 1007-4:1994. Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of tensile properties of filament at ambient temperature
BS 7711-3:1994 BS 7711-3:1994. Respiratory therapy equipment. Specification for gas-powered nebulizers for the delivery of drugs
BS EN 769:1994 BS EN 769:1994. Sacks for the transport of food aid. Sacks made of woven cotton/polyolefin fabric
BS EN 770:1994 BS EN 770:1994. Sacks for the transport of food aid. Paper sacks
BS EN 787:1994 BS EN 787:1994. Sacks for the transport of food aid. Sacks made of polyethylene film
BS EN 788:1994 BS EN 788:1994. Sacks for the transport of food aid. Tubular sacks made of composite film
BS EN 61207-1:1994, IEC 61207-1:1994 BS EN 61207-1:1994, IEC 61207-1:1994. Expression of performance of gas analyzers. General
BS EN 122110:1994 BS EN 122110:1994. Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SMA
BS EN 122140:1994 BS EN 122140:1994. Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SMC
BS EN 122170:1994 BS EN 122170:1994. Harmonized system of quality assessment for electronic components. Sectional specification: radio frequency coaxial connectors. Series SSMB
BS 7718:1994 BS 7718:1994. Code of practice for installation of fibre optic cabling
BS 812-104:1994 BS 812-104:1994. Testing aggregates. Method for qualitative and quantitative petrographic examination of aggregates
BS 7659:1994 BS 7659:1994. Specification for dog muzzles
BS 7720:1994 BS 7720:1994. Specification for non-biological sterilization indicator systems for use in the Bowie and Dick test with alternative test loads
BS 7787:1994, ISO 10752:1994 BS 7787:1994, ISO 10752:1994. Method for evaluation of the performance of coal sizing equipment
BS 7752-2:1994 BS 7752-2:1994. Free running type wire thread inserts. Specification for ISO metric fine pitch threads
BS 7753:1994 BS 7753:1994. Specification for performance of prevailing torque wire thread inserts
BS 7754:1994 BS 7754:1994. Code of practice for garment evaluation by wearer trials
BS EN 21683:1994, ISO 1683:1983 BS EN 21683:1994, ISO 1683:1983. Acoustics. Preferred reference quantities for acoustic levels
BS EN ISO 945:1994 BS EN ISO 945:1994. Cast iron. Designation of microstructure of graphite
BS EN 28073:1994, ISO/IEC 8073:1992 BS EN 28073:1994, ISO/IEC 8073:1992. Information technology. Telecommunications and information exchange between systems. Open Systems Interconnection. Protocol for
BS 7766:1994 BS 7766:1994. Specification for assessment of the potential for metallic materials to affect adversely the quality of water intended for human consumption
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
