BIS Standards Catalogue
BS EN 23878:1993, ISO 3878:1983 BS EN 23878:1993, ISO 3878:1983. Hardmetals. Vickers hardness test
BS EN 23907:1993, ISO 3907:1985 BS EN 23907:1993, ISO 3907:1985. Hardmetals. Determination of total carbon content. Gravimetric method
BS EN 23908:1993, ISO 3908:1985 BS EN 23908:1993, ISO 3908:1985. Hardmetals. Determination of insoluble (free) carbon content. Gravimetric method
BS EN 23954:1993, ISO 3954:1977 BS EN 23954:1993, ISO 3954:1977. Powders for powder metallurgical purposes. Sampling
BS EN 24003:1993, ISO 4003:1977 BS EN 24003:1993, ISO 4003:1977. Permeable sintered metal materials. Determination of bubble test pore size
BS EN 24489:1993, ISO 4489:1978 BS EN 24489:1993, ISO 4489:1978. Sintered hardmetals. Sampling and testing
BS 6068-6.8:1993, ISO 5667-8:1993 BS 6068-6.8:1993, ISO 5667-8:1993. Water quality. Sampling. Guidance on sampling of wet deposition
BS 6068-6.11:1993, ISO 5667-11:1993 BS 6068-6.11:1993, ISO 5667-11:1993. Water quality. Sampling. Guidance on sampling of groundwaters
BS EN 23923-1:1993, ISO 3923-1:1979 BS EN 23923-1:1993, ISO 3923-1:1979. Metallic powders. Determination of apparent density. Funnel method
BS EN 23923-2:1993, ISO 3923-2:1981 BS EN 23923-2:1993, ISO 3923-2:1981. Metallic powders. Determination of apparent density. Scott volumeter method
BS EN 24491-1:1993, ISO 4491-1:1989 BS EN 24491-1:1993, ISO 4491-1:1989. Metallic powders. Determination of oxygen content by reduction methods. General guidelines
BS EN 24491-2:1993, ISO 4491-2:1989 BS EN 24491-2:1993, ISO 4491-2:1989. Metallic powders. Determination of oxygen content by reduction methods. Loss of mass on hydrogen reduction (hydrogen loss)
BS EN 24491-4:1993, ISO 4491-4:1989 BS EN 24491-4:1993, ISO 4491-4:1989. Metallic powders. Determination of oxygen content by reduction methods. Total oxygen by reduction-extraction
BS EN 24492:1993, ISO 4492:1985 BS EN 24492:1993, ISO 4492:1985. Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
BS EN 24496:1993, ISO 4496:1978 BS EN 24496:1993, ISO 4496:1978. Metallic powders. Determination of acid insoluble content in iron, copper, tin and bronze powders
BS EN 24497:1993, ISO 4497:1983 BS EN 24497:1993, ISO 4497:1983. Metallic powders. Determination of particle size by dry sieving
BS EN 24498-1:1993, ISO 4498-1:1990 BS EN 24498-1:1993, ISO 4498-1:1990. Sintered metal materials, exluding hardmetals. Determination of apparent hardness. Materials of essentially uniform section har
BS EN 25754:1993, ISO 5754:1978 BS EN 25754:1993, ISO 5754:1978. Sintered metal materials, excluding hardmetals. Unnotched impact test piece
BS EN 27627-6:1993, ISO 7627-6:1985 BS EN 27627-6:1993, ISO 7627-6:1985. Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of chromium in contents 0,01 to 2 % (m/m)
BS ISO/IEC TR 10183-1:1993 BS ISO/IEC TR 10183-1:1993. Information technology. Text and office systems. Office Document Architecture (ODA) and interchange format. Technical Report on ISO 8613 implemen
DD ENV 1048:1993 DD ENV 1048:1993. Heat exchangers. Air cooled liquid coolers "dry coolers". Test procedure for establishing the performance
BS EN 61027:1993, IEC 61027:1991 BS EN 61027:1993, IEC 61027:1991. Specification for instruments for the measurement of aural acoustic impedance/admittance
BS EN 61000-4-7:1993, IEC 61000-4-7:1991 BS EN 61000-4-7:1993, IEC 61000-4-7:1991. Electromagnetic compatibility (EMC). General guide on harmonics and interharmonics measurements and instrumentation,
BS EN 27627-1:1993, ISO 7627-1:1983 BS EN 27627-1:1993, ISO 7627-1:1983. Hardmetals. Chemical analysis by flame atomic absorption spectrometry. General requirements
BS EN 330:1993 BS EN 330:1993. Wood preservatives. Field test method for determining the relative protective effectiveness of a wood preservative for use under a coating and exposed out-of-ground cont
BS EN 23326:1993, ISO 3326:1993 BS EN 23326:1993, ISO 3326:1993. Specification for hardmetals. Determination of (the magnetization) coercivity
BS EN 23927:1993, ISO 3927:1985 BS EN 23927:1993, ISO 3927:1985. Specification for metallic powders, excluding powders for hardmetals. Determination of compactibility (compressibility) in uniaxial com
BS EN 23953:1993, ISO 3953:1985 BS EN 23953:1993, ISO 3953:1985. Metallic powders. Determination of tap density
BS EN 23995:1993, ISO 3995:1985 BS EN 23995:1993, ISO 3995:1985. Specification for metallic powders. Determination of green strength by transverse rupture of rectangular compacts
BS EN 24503:1993, ISO 4503:1978 BS EN 24503:1993, ISO 4503:1978. Hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Fusion method
BS EN 24505:1993, ISO 4505:1978 BS EN 24505:1993, ISO 4505:1978. Specification for hardmetals. Metallographic determination of porosity and uncombined carbon
BS EN 24506:1993, ISO 4506:1979 BS EN 24506:1993, ISO 4506:1979. Specification for hardmetals. Compression test
BS EN 24883:1993, ISO 4883:1978 BS EN 24883:1993, ISO 4883:1978. Specification for hardmetals. Determination of contents of metallic elements by X-ray fluorescence. Solution method
BS EN 24884:1993, ISO 4884:1978 BS EN 24884:1993, ISO 4884:1978. Hardmetals. Sampling and testing of powders using sintered test pieces
BS EN 24499:1993, ISO 4499:1978 BS EN 24499:1993, ISO 4499:1978. Specification for hardmetals. Metallographic determination of microstructure
BS EN 27627-2:1993, ISO 7627-2:1983 BS EN 27627-2:1993, ISO 7627-2:1983. Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of calcium, potassium, magnesium and sodiu
BS EN 27627-3:1993, ISO 7627-3:1983 BS EN 27627-3:1993, ISO 7627-3:1983. Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of cobalt, iron, manganese and nickel in c
BS EN 27627-4:1993, ISO 7627-4:1985 BS EN 27627-4:1993, ISO 7627-4:1985. Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of molybdenum, titanium and vanadium in co
BS EN 27627-5:1993, ISO 7627-5:1985 BS EN 27627-5:1993, ISO 7627-5:1985. Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Determination of cobalt, iron, manganese, molybdenum, ni
BS 3424-36:1993 BS 3424-36:1993. Testing coated fabrics. Method 39. Method for determination of the dimensional stability of coated fabrics to domestic washing
BS 5284:1993 BS 5284:1993. Methods of sampling and testing mastic asphalt used in building and civil engineering
BS 7371-11:1993 BS 7371-11:1993. Coatings on metal fasteners. Specification for zinc flake non-electrolytically applied cured coatings
BS 7654:1993 BS 7654:1993. Specification for single phase street lighting fuses (cut-outs) for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street fu
BS 7666-1:1993 BS 7666-1:1993. Spatial data-sets for geographical referencing. Specification for a Street Gazetteer
BS 7777-1:1993 BS 7777-1:1993. Flat-bottomed, vertical, cylindrical storage tanks for low temperature service. Guide to the general provisions applying for design, construction, installation and opera
BS 7777-3:1993 BS 7777-3:1993. Flat-bottomed, vertical, cylindrical storage tanks for low temperature service. Recommendations for the design and construction of prestressed and reinforced concrete ta
BS 7777-4:1993 BS 7777-4:1993. Flat-bottomed, vertical, cylindrical storage tanks for low temperature service. Specification for the design and construction of single containment tanks for the storage
BS EN 61142:1993, IEC 61142:1993 BS EN 61142:1993, IEC 61142:1993. Data exchange for meter reading, tariff and load control. Local bus data exchange
BS 7653-3:1993 BS 7653-3:1993. Piston and/or plunger operated volumetric apparatus. Methods of test
BS 7653-4:1993 BS 7653-4:1993. Piston and/or plunger operated volumetric apparatus. Specification for conditions of test, safety and supply
BS 7656:1993 BS 7656:1993. Specification for low-voltage pole-mounting fuses (cut-outs). 315 A rating
BS EN 60343:1993, IEC 60343:1991 BS EN 60343:1993, IEC 60343:1991. Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
DD ENV 623-3:1993 DD ENV 623-3:1993. Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of grain size
BS 2782-1:Method 140C:1993, ISO 10351:1992 BS 2782-1:Method 140C:1993, ISO 10351:1992. Methods of testing plastics. Thermal properties. Determination of the combustibility of specimens using a 125 mm
BS 5381-6:1993, ISO 9512:1993 BS 5381-6:1993, ISO 9512:1993. Methods for determination of physical properties of tobacco and tobacco products. Ventilation of cigarettes
BS 7253-1:1993, ISO 5833:1992 BS 7253-1:1993, ISO 5833:1992. Non-metallic materials for surgical implants. Specification for acrylic resin cement
BS 7653-1:1993 BS 7653-1:1993. Piston and/or plunger operated volumetric apparatus. Glossary of terms
BS 7653-2:1993 BS 7653-2:1993. Piston and/or plunger operated volumetric apparatus. Methods of operation
BS EN 20780:1993, ISO 780:1985 BS EN 20780:1993, ISO 780:1985. Packaging. Pictorial marking for handling of goods
BS EN 60801-2:1993, IEC 60801-2:1991 BS EN 60801-2:1993, IEC 60801-2:1991. Electromagnetic compatibility for industrial-process measurement and control equipment. Electrostatic discharge requirements
BS 7777-2:1993 BS 7777-2:1993. Flat-bottomed, vertical, cylindrical storage tanks for low temperature service. Specification for the design and construction of single, double and full containment meta
BS EN 2078:1993 BS EN 2078:1993. Metallic materials. Manufacturing schedule. Inspection schedule. Inspection and test report. Description and rules for use
BS EN 60068-2-7:1993, IEC 60068-2-7:1983 BS EN 60068-2-7:1993, IEC 60068-2-7:1983. Environmental testing. Test methods. Test Ga and guidance. Acceleration, steady state
BS 5775-0:1993, ISO 31-0:1992 BS 5775-0:1993, ISO 31-0:1992. Specification for quantities, units and symbols. General principles
BS 5775-8:1993, ISO 31-8:1992 BS 5775-8:1993, ISO 31-8:1992. Specification for quantities, units and symbols. Physical chemistry and molecular physics
BS 7661:1993 BS 7661:1993. Specification for inflatable armbands worn as flotation aids
BS EN 22768-2:1993, ISO 2768-2:1989 BS EN 22768-2:1993, ISO 2768-2:1989. General tolerances. Geometrical tolerances for features without individual tolerance indications
BS G 248:1993, ISO 10296:1992 BS G 248:1993, ISO 10296:1992. Specification for hybrid remote power controllers. General requirements
BS 5772-5:1993, IEC 60512-5:1992 BS 5772-5:1993, IEC 60512-5:1992. Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods. Impact tests
BS 7349-1:1993 BS 7349-1:1993. Blind rivets with break mandrel. Specification for closed end blind rivets
BS 6328:Part 7:1993 BS 6328:Part 7:1993. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to digital circuits
BS 6328-8.1:1993 BS 6328-8.1:1993. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to digital circuits with i
BS ISO/IEC 9834-1:1993 BS ISO/IEC 9834-1:1993. Information technology. Open systems interconnection. Procedures for the operation of OSI registration authorities. Information technology. Open systems
BS EN 60933-5:1993, IEC 60933-5:1992 BS EN 60933-5:1993, IEC 60933-5:1992. Audio, video and audiovisual systems. Interconnections and matching values. Specification for Y/C connector for video systems
BS 1016:Part 111:1993 BS 1016:Part 111:1993. Methods for analysis and testing of coal and coke. Determination of abrasion index of coal
BS 4937-30:1993 BS 4937-30:1993. International thermocouple reference tables. Extension and compensating cables. Tolerances and identification system
BS 6200-2.1:1993 BS 6200-2.1:1993. Sampling and analysis of iron, steel and other ferrous metals. Sampling and sample preparation. Methods for iron and steel
BS 6328:Part 8:Section 8.2:1993 BS 6328:Part 8:Section 8.2:1993. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connect
BS 7675:1993, ISO 6524:1992 BS 7675:1993, ISO 6524:1992. Plain bearings. Thin-walled half bearings. Checking of peripheral length
BS 5550-2.1.1:1993, ISO 69:1990 BS 5550-2.1.1:1993, ISO 69:1990. Cinematography. 16 mm film. Raw stock. Specification for the cutting and perforating dimensions of 16 mm motion-picture film and magnet
BS 5550-3.1.1:1993, ISO 491:1988 BS 5550-3.1.1:1993, ISO 491:1988. Cinematography. 35 mm film. Raw stock. Specification for the cutting and perforating dimensions of 35 mm motion-picture film and magn
BS 6840:Part 12:1993, IEC 60268-12:1987 BS 6840:Part 12:1993, IEC 60268-12:1987. Sound system equipment. Specification for application of connectors for broadcast and similar use
BS 7674:1993, IEC 61225:1993 BS 7674:1993, IEC 61225:1993. Nuclear power plants. Instrumentation and control systems important for safety. Requirements for electrical supplies
BS EN 60734:1993, IEC 60734:1993 BS EN 60734:1993, IEC 60734:1993. Specification for hard water to be used for testing the performance of some household electrical appliances
BS EN 61044:1993, IEC 61044:1990 BS EN 61044:1993, IEC 61044:1990. Opportunity-charging of lead-acid traction batteries
BS EN 61056-1:1993, IEC 61056-1:1991 BS EN 61056-1:1993, IEC 61056-1:1991. Portable lead-acid cells and batteries (valve-regulated types). General requirements, functional characteristics. Methods of
BS ISO/IEC 2593:1993 BS ISO/IEC 2593:1993. Information technology. Telecommunications and information exchange between systems. 34-pole DTE/DCE interface connector mateability dimensions and contact n
BS ISO/IEC 8880-2:1992 BS ISO/IEC 8880-2:1992. Information technology. Telecommunications and information exchange between systems. Protocol combinations to provide and support the OSI network service
BS ISO/IEC TR 10730:1993 BS ISO/IEC TR 10730:1993. Information technology. Open systems interconnection. Tutorial on naming and addressing
BS EN ISO 6272:1994, BS 3900-E13:1993 BS EN ISO 6272:1994, BS 3900-E13:1993. Paints and varnishes. Falling-weight test
BS 6607-3:1993, ISO 9270:1992 BS 6607-3:1993, ISO 9270:1992. Tool shanks with 7/24 taper for automatic tool changers. Specification for tapers for spindle noses
BS 7251:Part 11:1993, ISO 7206-7:1993 BS 7251:Part 11:1993, ISO 7206-7:1993. Orthopaedic joint prostheses. Specification for endurance of stemmed femoral components without application of torsion
BS AU 249:1993, ISO 7649:1991 BS AU 249:1993, ISO 7649:1991. Specification for clutch housings for reciprocating internal combustion engines. Nominal dimensions and tolerances
BS AU 250:1993, ISO 7651:1991 BS AU 250:1993, ISO 7651:1991. Specification for mounting dimensions of alternators, types 1, 2 and 3 for commercial vehicles and buses
BS 7349-2:1993 BS 7349-2:1993. Blind rivets with break mandrel. Specification for open end blind rivets
BS 4987-1:1993 BS 4987-1:1993. Coated macadam for roads and other paved areas. Specification for constituent materials and for mixtures
BS 5772-9:1993, IEC 60512-9:1992 BS 5772-9:1993, IEC 60512-9:1992. Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods. Miscellaneou
BS 7663:1993 BS 7663:1993. Methods of test for determination of permittivity and dissipation factor of electrical insulating material in sheet or tubular form
BS 2A 231:1993, ISO 3353:1992 BS 2A 231:1993, ISO 3353:1992. Rolled threads for bolts. Lead and runout requirements
BS G 249:1993, ISO 8816:1993 BS G 249:1993, ISO 8816:1993. Specification for solid-state remote power controllers. General requirements
BS ISO/IEC 10728:1993 BS ISO/IEC 10728:1993. Information technology. Information Resource Dictionary System (IRDS) Services Interface
BS QC 030000:1993, IEC 60807-1:1991 BS QC 030000:1993, IEC 60807-1:1991. Harmonized system of quality assessment for electronic components. Rectangular connectors for frequencies below 3 MHz. Generic
BS QC 750106:1993, IEC 60747-8-2:1993 BS QC 750106:1993, IEC 60747-8-2:1993. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank
BS AU 252:1993, ISO 8123:1991 BS AU 252:1993, ISO 8123:1991. Specification for diametral pitch starter motor pinions for road vehicles
BS 7677:1993, ISO 9691:1992 BS 7677:1993, ISO 9691:1992. Recommendations for classification of imperfections in pipe joint rings
BS AU 209-7:1993 BS AU 209-7:1993. Vehicle security. Specification for locking systems for goods vehicle driver's compartments
BS ISO/IEC 10646-1:1993 BS ISO/IEC 10646-1:1993. Information technology. Universal Multiple-Octet Coded Character Set (UCS). Architecture and Basic Multilingual Plane
BS EN 60335-2-63:1993 BS EN 60335-2-63:1993. Specification for safety of household and similar electrical appliances. Particular requirements. Commercial electric water boilers and liquid heaters
BS 4987-2:1993 BS 4987-2:1993. Specification for transport, laying and compaction
BS 7660:1993 BS 7660:1993. Specification for safety pins for general use
BS EN 24641:1993, ISO 4641:1991 BS EN 24641:1993, ISO 4641:1991. Rubber hoses for water suction and discharge. Specification
BS EN 61097-1:1993, IEC 61097-1:1992 BS EN 61097-1:1993, IEC 61097-1:1992. Global maritime distress and safety system (GMDSS). Radar transponder. Marine search and rescue (SART). Operational and perfo
BS 3250-1:1993 BS 3250-1:1993. Methods for thermal testing of domestic solid mineral fuel burning appliances with convection. Flue loss method
BS ISO/IEC 11570:1992 BS ISO/IEC 11570:1992. Information technology. Telecommunications and information exchange between systems. Open systems interconnection. Transport protocol identification mechan
BS ISO/IEC 10732:1993 BS ISO/IEC 10732:1993. Information technology. Use of X.25 packet layer protocol to provide the OSI connection-mode network service over the telephone network
BS ISO/IEC 10588:1993 BS ISO/IEC 10588:1993. Information technology. Use of X.25 packet layer protocol in conjunction with X.21/X.21 bis to provide the OSI connection-mode network service
BS ISO 10223:1992 BS ISO 10223:1992. Textile machinery. Flat warp knitting machines. Numbering of guide bars
BS ISO 8114:1990 BS ISO 8114:1990. Textile machinery and accessories. Spindles for ring-spinning and doubling machines. List of equivalent terms
BS EN 61120-1:1993, IEC 61120-1:1991 BS EN 61120-1:1993, IEC 61120-1:1991. Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use. General requirements
BS EN 61064:1993, IEC 61064:1991 BS EN 61064:1993, IEC 61064:1991. Guide to acceptance tests for steam turbine speed control systems
BS EN 61006:1993, IEC 61006:1991 BS EN 61006:1993, IEC 61006:1991. Methods of test for determination of the glass transition temperature of electrical insulating materials
BS EN 60908:1993, IEC 60908:1987 BS EN 60908:1993, IEC 60908:1987. Specification for compact disc digital audio system
BS 7678:1993, ISO 6978:1992 BS 7678:1993, ISO 6978:1992. Method for determination of mercury in natural gas
BS 7676-2:1993, ISO 8579-2:1993 BS 7676-2:1993, ISO 8579-2:1993. Acceptance code for gears. Determination of mechanical vibrations of gear units during acceptance testing
BS EN 30320:1993, ISO 10320:1991 BS EN 30320:1993, ISO 10320:1991. Geotextiles. Identification on site
BS 2499-1:1993 BS 2499-1:1993. Hot-applied joint sealant systems for concrete pavements. Specification for joint sealants
BS 2499-3:1993 BS 2499-3:1993. Hot-applied joint sealant systems for concrete pavements. Methods of test
BS EN 60045-1:1993, IEC 60045-1:1991 BS EN 60045-1:1993, IEC 60045-1:1991. Guide to steam turbine procurement. Guide to steam turbine procurement
BS EN 61069-1:1993, IEC 61069-1:1991 BS EN 61069-1:1993, IEC 61069-1:1991. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. General con
BS 2917-1:1993, ISO 1219-1:1991 BS 2917-1:1993, ISO 1219-1:1991. Graphic symbols and circuit diagrams for fluid power systems and components. Specification for graphic symbols
BS 7676-1:1993, ISO 8579-1:1993 BS 7676-1:1993, ISO 8579-1:1993. Acceptance code for gears. Determination of airborne sound power levels emitted by gear units
BS EN 60695-2-4/0:1993, IEC 60695-2-4/0:1991 BS EN 60695-2-4/0:1993, IEC 60695-2-4/0:1991. Fire hazard testing. Diffusion type and premixed type flame test methods
BS ISO 10458:1993 BS ISO 10458:1993. Textile machinery. Square bars for winding devices relating to dyeing and finishing machines. Dimensions
BS ISO/IEC 10164-1:1993 BS ISO/IEC 10164-1:1993. Information technology. Open systems interconnection. Systems management. Object management function
BS ISO/IEC 10164-2:1993 BS ISO/IEC 10164-2:1993. Information technology. Open systems interconnection. Systems management. State management function
BS ISO/IEC 10164-5:1993 BS ISO/IEC 10164-5:1993. Information technology. Open systems interconnection. Systems management. Event report management function
BS ISO 368:1991 BS ISO 368:1991. Spinning preparatory, spinning and doubling (twisting) machinery. Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64
BS EN 540:1993 BS EN 540:1993. Clinical investigation of medical devices for human subjects
BS 7425-3:1993, ISO 9138:1993 BS 7425-3:1993, ISO 9138:1993. Abrasive grains. Method for sampling and splitting
BS 5996:1993 BS 5996:1993. Specification for acceptance levels for internal imperfections in steel plate, strip and wide flats, based on ultrasonic testing
BS 7673:1993 BS 7673:1993. Specification for domestic gas cooker oven control valves with or without manual override
BS EN 60095-2:1993 BS EN 60095-2:1993. Lead-acid starter batteries. Dimensions of batteries and dimensions and marking of terminals
BS M 69:1993, ISO 4117:1993 BS M 69:1993, ISO 4117:1993. Air cargo equipment. Air and air/land cargo pallets. Specification and testing
BS M 70:1993, ISO 6517:1992 BS M 70:1993, ISO 6517:1992. Air cargo equipment. Base-restrained certified containers exclusively for the lower deck of high-capacity aircraft
BS 7594:1993 BS 7594:1993. Code of practice for audio-frequency induction-loop systems (AFILS)
BS 7647:1993 BS 7647:1993. Specification for radio teleswitches for tariff and load control
BS 8204-3:1993 BS 8204-3:1993. Screeds, bases and in-situ floorings. Code of practice for polymer modified cementitious wearing surfaces
BS EN 10164:1993 BS EN 10164:1993. Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions
BS EN 28362-1:1993, ISO 8362-1:1989 BS EN 28362-1:1993, ISO 8362-1:1989. Injection containers for injectables and accessories. Injection vials made of glass tubing
BS EN 28872:1993, ISO 8872:1988 BS EN 28872:1993, ISO 8872:1988. Aluminium caps for transfusion, infusion and injection bottles. General requirements and test methods
BS EN 61074:1993, IEC 61074:1991 BS EN 61074:1993, IEC 61074:1991. Method of test for determination of heats and temperatures of melting and crystallization of electrical insulating materials by diffe
BS CECC 00114-5:1993 BS CECC 00114-5:1993. Rule of procedure 14. Quality assessment procedures. Process approval of specialist contractors within the electronic components industry
BS CECC 200000:1993 BS CECC 200000:1993. Harmonized system of quality assessment for electronic components. Requirements for process assessment schedules for process approval
BS ISO/IEC 10164-3:1993 BS ISO/IEC 10164-3:1993. Information technology. Open systems interconnection. Systems management. Attributes for representing relationships
BS ISO/IEC 10170-1:1993 BS ISO/IEC 10170-1:1993. Information technology. Open systems interconnection. Conformance test suite for the FTAM protocol. Test suite structure and test purposes
BS 5724:Part 2:Section 2.30:1993, ISO 9918:1993 BS 5724:Part 2:Section 2.30:1993, ISO 9918:1993. Medical electrical equipment. Particular requirements for safety. Specification for capnometers for use
BS 7679:1993, ISO 12301:1992 BS 7679:1993, ISO 12301:1992. Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics
BS EN 60068-2-2:1993, IEC 60068-2-2:1974 BS EN 60068-2-2:1993, IEC 60068-2-2:1974. Environmental testing. Test methods. Tests B. Dry heat
DD ENV 61000-2-2:1993 DD ENV 61000-2-2:1993. Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power
BS EN 169100:1993 BS EN 169100:1993. Harmonized system of quality assessment for electronic components. Sectional specification: quartz crystal controlled oscillators (capability approval)
BS EN 60335-2-58:1993 BS EN 60335-2-58:1993. Specification for safety of household and similar electrical appliances. Particular requirements. Commercial electric dishwashing machines
BS EN 60095-4:1993 BS EN 60095-4:1993. Lead-acid starter batteries. Dimensions of batteries for heavy commercial vehicles
BS EN 28362-3:1993, ISO 8362-3:1989 BS EN 28362-3:1993, ISO 8362-3:1989. Injection containers for injectables and accessories. Aluminium caps for injection vials
BS EN 28362-2:1993, ISO 8362-2:1988 BS EN 28362-2:1993, ISO 8362-2:1988. Injection containers for injectables and accessories. Closures for injection vials
BS EN 10045-2:1993 BS EN 10045-2:1993. Charpy impact test on metallic materials. Method for the verification of impact testing machines
BS 5973:1993 BS 5973:1993. Code of practice for access and working scaffolds and special scaffold structures in steel
BS EN ISO 9167-1:1995, BS 4289-9:1993 BS EN ISO 9167-1:1995, BS 4289-9:1993. Rapeseed. Determination of glucosinolates content. Method using high-performance liquid chromatography
BS EN 60604:1993, IEC 60604:1980 BS EN 60604:1993, IEC 60604:1980. 'Topflash/Flipflash' photographic flash lamp array
BS ISO 1505:1993 BS ISO 1505:1993. Textile machinery. Widths relating to dyeing and finishing machines. Definitions and range of nominal widths
BS ISO 2187:1990 BS ISO 2187:1990. Spinning preparatory machinery, spinning and doubling (twisting) machinery. List of equivalent terms
BS ISO 3534-1:1993 BS ISO 3534-1:1993. Statistics. Vocabulary and symbols. Probability and general statistical terms
BS ISO 3534-2:1993 BS ISO 3534-2:1993. Statistics. Vocabulary and symbols. Statistical quality control
BS ISO 8121:1986 BS ISO 8121:1986. Textile machinery. Knitting machines. Nameplate information
BS ISO 8229:1991 BS ISO 8229:1991. Operations and baths relating to dry-cleaning machines. Vocabulary
BS ISO/IEC 9596-2:1993 BS ISO/IEC 9596-2:1993. Information technology. Open systems interconnection. Common management information protocol. Protocol implementation conformance statement (PICS) profor
PD 6581:1993 PD 6581:1993. Extracts from ISO/IEC 10646-1:1993. Information technology. Universal multiple-octet coded character set (UCS). Part 1. Architecture and basic multilingual plane
BS ISO 10160:1993 BS ISO 10160:1993. Information and documentation. Open systems interconnection. Interlibrary loan application service definition
BS 1070:1993 BS 1070:1993. Specification for black paint (tar-based)
BS 4019-3:1993, ISO 3551-1:1992 BS 4019-3:1993, ISO 3551-1:1992. Rotary core drilling equipment. Specification for System A. Metric units
BS 4019-4:1993, ISO 3551-2:1992 BS 4019-4:1993, ISO 3551-2:1992. Rotary core drilling equipment. Specification for System A. Inch units
BS 6010-4:1993, ISO 9628:1992 BS 6010-4:1993, ISO 9628:1992. Rolling bearings. Bearings with spherical outside surface and extended inner ring width. Specification for insert bearings and eccentric lo
BS 7425-4:1993, ISO 9284:1992 BS 7425-4:1993, ISO 9284:1992. Abrasive grains. Specification for test-sieving machines
BS 7680:1993, ISO 10185:1993 BS 7680:1993, ISO 10185:1993. Glossary of terms for tobacco and tobacco products
BS EN 28362-4:1993, ISO 8362-4:1989 BS EN 28362-4:1993, ISO 8362-4:1989. Injection containers for injectables and accessories. Injection vials made of moulded glass
BS 3G 229:1993 BS 3G 229:1993. Schedule for environmental conditions and test procedures for airborne equipment
BS 2M 59:1993, ISO 7319:1992 BS 2M 59:1993, ISO 7319:1992. Specification for interface of metric couplings, 24° cone, for aerospace fluid systems
BS 2M 60:1993, ISO 7169:1993 BS 2M 60:1993, ISO 7169:1993. Specification for separable tube fittings, 24° cone, for aerospace fluid systems
BS 2M 63:1993, ISO 7320:1992 BS 2M 63:1993, ISO 7320:1992. Specification for dimensions of aerospace fluid system port connection, seal and fitting end
BS QC 400203:1993, IEC 60115-4-3:1993 BS QC 400203:1993, IEC 60115-4-3:1993. Specification for fixed resistors for use in electronic equipment. Blank detail specification. Fixed power resistors, heat-
BS EN 60335-2-55:1993 BS EN 60335-2-55:1993. Specification for safety of household and similar electrical appliances. Particular requirements. Electrical appliances for use with aquariums and garden p
BS EN 60868:1993 BS EN 60868:1993. Flickermeter. Functional and design specifications
BS EN 28960:1993, ISO 8960:1991 BS EN 28960:1993, ISO 8960:1991. Refrigerators, frozen food storage cabinets and food freezers for household and similar use. Measurement of emission of airborne acoust
BS 7672:1993 BS 7672:1993. Specification for compression, stiffness and labelling of anti-embolism hosiery
BS AU 237a:1993 BS AU 237a:1993. Specification for light domestic duty jumper lead sets for automotive starting
DD ENV 1070:1993 DD ENV 1070:1993. Safety of machinery. Terminology
BS EN 61049:1993 BS EN 61049:1993. Specification for capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements
BS 7613:1994 BS 7613:1994. Specification for hot rolled quenched and tempered weldable structural steel plates
BS 7668:1994 BS 7668:1994. Specification for weldable structural steels. Hot finished structural hollow sections in weather resistant steels
BS EN 10113-1:1993 BS EN 10113-1:1993. Hot-rolled products in weldable fine grain structural steels. General delivery conditions
BS EN 10113-3:1993 BS EN 10113-3:1993. Hot-rolled products in weldable fine grain structural steels. Delivery conditions for thermomechanical rolled steels
BS EN 10155:1993 BS EN 10155:1993. Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions
BS EN 60601-2-28:1993, BS 5724-2.128:1993,IEC 60601-2-28:1993 BS EN 60601-2-28:1993, BS 5724-2.128:1993,IEC 60601-2-28:1993. Medical electrical equipment. Particular requirements for safety. Specifica
BS EN 60998-2-4:1993, IEC 60998-2-4:1993 BS EN 60998-2-4:1993, IEC 60998-2-4:1993. Connecting devices for low-voltage circuits for household and similar purposes. Particular requirements for twist-on
BS 476-15:1993, ISO 5660-1:1993 BS 476-15:1993, ISO 5660-1:1993. Fire tests on building materials and structures. Method for measuring the rate of heat release of products
BS 476-33:1993, ISO 9705:1993 BS 476-33:1993, ISO 9705:1993. Fire tests on building materials and structures. Full-scale room test for surface products
BS 5550-2.12.1:1993 BS 5550-2.12.1:1993. Cinematography. 16 mm film. Miscellaneous. Specification for test film for assessing the picture performance of 16 mm motion-picture projectors
BS ISO/IEC 10740-2:1993 BS ISO/IEC 10740-2:1993. Information technology. Text and office systems. Referenced Data Transfer. Protocol specification
BS 7670-1:1993 BS 7670-1:1993. Steel nuts and bolts for resistance projection welding. Specification for dimensions and properties
BS 4317-10:1993, ISO 2171:1993 BS 4317-10:1993, ISO 2171:1993. Methods of test for cereals and pulses. Determination of ash of cereals and milled cereal products
BS 7371-3:1993 BS 7371-3:1993. Coatings on metal fasteners. Specification for electroplated zinc and cadmium coatings
BS 7683:1993, ISO 10470:1993 BS 7683:1993, ISO 10470:1993. Guide to defects of green coffee
BS ISO/IEC 10036:1993 BS ISO/IEC 10036:1993. Information technology. Font information interchange. Procedure for registration of glyph and glyph collection identifiers
BS ISO/IEC 10740-1:1993 BS ISO/IEC 10740-1:1993. Information technology. Text and office systems. Referenced Data Transfer. Abstract service definition
BS EN 29142:1993, ISO 9142:1990 BS EN 29142:1993, ISO 9142:1990. Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
BS EN 41003:1993 BS EN 41003:1993. Particular safety requirements for equipment to be connected to telecommunication networks
BS 6315:1993, ISO 1795:1992 BS 6315:1993, ISO 1795:1992. Methods for sampling and further preparative procedures for raw, natural and synthetic rubber
BS 6200-2.2:1993 BS 6200-2.2:1993. Sampling and analysis of iron, steel and other ferrous metals. Sampling and sample preparation. Methods for ferroalloys and other alloying additives
BS 903-A62:1993, ISO 9026:1991 BS 903-A62:1993, ISO 9026:1991. Physical testing of rubber. Method for determination of green strength of raw rubber of unvulcanized compounds
BS 4480-3:1993, ISO 4379:1993 BS 4480-3:1993, ISO 4379:1993. Plain bearings: metric series. Copper alloy bushes
BS 1747-11:1993, ISO 9835:1993 BS 1747-11:1993, ISO 9835:1993. Methods for measurement of air pollution. Determination of a black smoke index in ambient air
BS 5350-B4:1993, ISO 10364:1993 BS 5350-B4:1993, ISO 10364:1993. Methods of test for adhesives. Adhesives. Determination of pot life
BS 7442-4.3:1993, ISO 6123-3:1985 BS 7442-4.3:1993, ISO 6123-3:1985. Rubber or plastics covered rollers. Requirements. Specification for dimensional tolerances
BS 7568-25:1993, ISO 9182-1:1992 BS 7568-25:1993, ISO 9182-1:1992. Press tools. Guide pillars. Types
BS EN 60507:1993, IEC 60507:1991 BS EN 60507:1993, IEC 60507:1991. Artificial pollution tests on high-voltage insulators to be used on a.c. systems
BS ISO/IEC 8348:1993 BS ISO/IEC 8348:1993. Information technology. Open systems interconnection. Network service definition
BS ISO/IEC 10164-8:1993 BS ISO/IEC 10164-8:1993. Information technology. Open systems interconnection. Systems management. Security audit trail function
BS CECC 22000:1993 BS CECC 22000:1993. Harmonized system of quality assessment for electronic components. Generic specification. Radio frequency coaxial connectors (Parts I, II and III)
BS EN 60654-1:1993, IEC 60654-1:1993 BS EN 60654-1:1993, IEC 60654-1:1993. Industrial-process measurement and control equipment. Operating conditions. Climatic conditions
BS 6068-1.4:1993, ISO 6107-4:1993 BS 6068-1.4:1993, ISO 6107-4:1993. Water quality. Glossary. An additional 18 terms
BS 6068-2.42:1993, ISO 9964-1:1993 BS 6068-2.42:1993, ISO 9964-1:1993. Water quality. Physical, chemical and biochemical methods. Determination of sodium and potassium: determination of sodium by atom
BS 6068-2.43:1993, ISO 9964-2:1993 BS 6068-2.43:1993, ISO 9964-2:1993. Water quality. Physical, chemical and biochemical methods. Determination of sodium and potassium: determination of potassium by a
BS 6068-2.44:1993, ISO 9964-3:1993 BS 6068-2.44:1993, ISO 9964-3:1993. Water quality. Physical, chemical and biochemical methods. Determination of sodium and potassium: determination of sodium and pot
DD ENV 658-1:1993 DD ENV 658-1:1993. Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of tensile strength
BS 7688:1993, IEC 60779:1983 BS 7688:1993, IEC 60779:1983. Test methods for electro-slag remelting furnaces
BS 7689:1993, IEC 60703:1981 BS 7689:1993, IEC 60703:1981. Test methods for electroheating installations with electron guns
BS EN ISO 9665:1995 BS EN ISO 9665:1995. Adhesives. Animal glues. Methods for sampling and testing
BS 3999-17:1993, IEC 61214:1993 BS 3999-17:1993, IEC 61214:1993. Methods of measuring the performance of household electrical appliances. Hand-held mains voltage operated spray guns
BS 7372-3:1993, ISO 4783-3:1981 BS 7372-3:1993, ISO 4783-3:1981. Guide to the choice of aperture size and wire diameter combinations for industrial wire screens and woven wire cloth. Preferred combina
BS 7568-26:1993, ISO 9182-2:1992 BS 7568-26:1993, ISO 9182-2:1992. Press tools. Guide pillars. Type A, straight pillars
BS 7568-28:1993, ISO 9182-4:1992 BS 7568-28:1993, ISO 9182-4:1992. Press tools. Guide pillars. Type C, pillars with taper lead and bush
BS 7568-29:1993, ISO 9182-5:1992 BS 7568-29:1993, ISO 9182-5:1992. Press tools. Guide pillars. Type D, end-locking pillars with flange
BS 7684:1993, IEC 60398:1980 BS 7684:1993, IEC 60398:1980. General test conditions for industrial electro-heating equipment
BS 7685:1993, IEC 60676:1980 BS 7685:1993, IEC 60676:1980. Test methods for direct arc furnaces
BS 7568-27:1993, ISO 9182-3:1992 BS 7568-27:1993, ISO 9182-3:1992. Press tools. Guide pillars. Type B, end-locking pillars
BS 7686:1993, IEC 60683:1980 BS 7686:1993, IEC 60683:1980. Test methods for submerged-arc furnaces
BS 7694:1993, ISO 2395:1990 BS 7694:1993, ISO 2395:1990. Glossary of terms for test sieves and test sieving
BS EN 481:1993, BS 6069-3.5:1993 BS EN 481:1993, BS 6069-3.5:1993. Workplace atmospheres. Size fraction definitions for measurement of airborne particles
BS EN 2004-1:1993 BS EN 2004-1:1993. Test methods for aluminium and aluminium alloy products. Determination of electrical conductivity of wrought aluminium alloys
BS EN 2955:1993 BS EN 2955:1993. Recycling of titanium and titanium alloy scrap
BS EN 23661:1993, ISO 3661:1977 BS EN 23661:1993, ISO 3661:1977. End-suction centrifugal pumps. Baseplate and installation dimensions
BS EN 50091-1:1993 BS EN 50091-1:1993. Specification for uninterruptible power systems (UPS). General and safety requirements
BS 7709-1:1993, ISO 10136-1:1993 BS 7709-1:1993, ISO 10136-1:1993. Analysis of extract solutions of glass. Method for determination of silicon dioxide by molecular absorption spectrometry
BS 7709-2:1993, ISO 10136-2:1993 BS 7709-2:1993, ISO 10136-2:1993. Analysis of extract solutions of glass. Method for determination of sodium oxide and potassium oxide by flame spectrometric methods
BS 7709-3:1993, ISO 10136-3:1993 BS 7709-3:1993, ISO 10136-3:1993. Analysis of extract solutions of glass. Method for determination of calcium oxide and magnesium oxide by flame atomic absorption spec
BS 7709-4:1993, ISO 10136-4:1993 BS 7709-4:1993, ISO 10136-4:1993. Analysis of extract solutions of glass. Method for determination of aluminium oxide by molecular absorption spectrometry
BS 7709-5:1993, ISO 10136-5:1993 BS 7709-5:1993, ISO 10136-5:1993. Analysis of extract solutions of glass. Method for determination of iron (III) oxide by molecular absorption spectrometry and flame a
BS 7709-6:1993, ISO 10136-6:1993 BS 7709-6:1993, ISO 10136-6:1993. Analysis of extract solutions of glass. Method for determination of boron (III) oxide by molecular absorption spectrometry
BS EN ISO 9614-1:1995 BS EN ISO 9614-1:1995. Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement at discrete points
BS 715:1993 BS 715:1993. Specification for metal flue pipes, fittings, terminals and accessories for gas-fired appliances with a rated input not exceeding 60 kW
BS 5663-3:1993, ISO 8263:1992 BS 5663-3:1993, ISO 8263:1992. Methods of testing iron ores. Iron ore fines. Method for presentation of the results of sintering tests
BS 7664:1993 BS 7664:1993. Specification for undercoat and finishing paints
BS 7710-1:1993, ISO 9949-1:1993 BS 7710-1:1993, ISO 9949-1:1993. Urine absorbing aids. Vocabulary. Conditions of urinary incontinence
BS 7710-2:1993, ISO 9949-2:1993 BS 7710-2:1993, ISO 9949-2:1993. Urine absorbing aids. Vocabulary. Products
BS 7710-3:1993, ISO 9949-3:1993 BS 7710-3:1993, ISO 9949-3:1993. Urine absorbing aids. Vocabulary. Identification of product types
BS 4317-29:1993, ISO 11050:1993 BS 4317-29:1993, ISO 11050:1993. Methods of test for cereals and pulses. Determination of impurities of animal origin in wheat flour and durum wheat semolina
BS 7702:1993, ISO 9200:1993 BS 7702:1993, ISO 9200:1993. Guide to volumetric metering of viscous hydrocarbons
BS EN 404:1993 BS EN 404:1993. Specification for respiratory protective devices for self-rescue: filter self-rescuer
BS EN 779:1993 BS EN 779:1993. Particulate air filters for general ventilation. Requirements, testing, marking
BS EN 2004-5:1993 BS EN 2004-5:1993. Test methods for aluminium and aluminium alloy products. Determination of cladding thickness and copper diffusion of clad semi-finished products
BS EN 22922:1993, ISO 2922:1975 BS EN 22922:1993, ISO 2922:1975. Acoustics. Measurement of noise emitted by vessels on inland water-ways and harbours
BS 1000[8]:1993 BS 1000[8]:1993. Universal Decimal Classification. English full edition. Language. Linguistics. Literature
BS 7020-5.2:1993, ISO 2598-2:1992 BS 7020-5.2:1993, ISO 2598-2:1992. Analysis of iron ores. Methods for the determination of silicon content. Reduced molybdosilicate spectrophotometric method
BS 7690:1993, IEC 60396:1991 BS 7690:1993, IEC 60396:1991. Test methods for induction channel furnaces
BS 2745-1:1993 BS 2745-1:1993. Washer-disinfectors for medical purposes. Specification for general requirements
BS 7698-1:1993, ISO 8528-1:1993 BS 7698-1:1993, ISO 8528-1:1993. Reciprocating internal combustion engine driven alternating current generating sets. Specification for application, ratings and perform
BS 7698-3:1993, ISO 8528-3:1993 BS 7698-3:1993, ISO 8528-3:1993. Reciprocating internal combustion engine driven alternating current generating sets. Specification for alternating current generators f
BS 2745-2:1993 BS 2745-2:1993. Washer-disinfectors for medical purposes. Specification for human waste container washer-disinfectors
BS 2745-3:1993 BS 2745-3:1993. Washer-disinfectors for medical purposes. Specification for washer-disinfectors except those used for processing human-waste containers and laundry
BS 4841-1:1993 BS 4841-1:1993. Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications. Specification for laminated board for general purposes
BS 7698-2:1993, ISO 8528-2:1993 BS 7698-2:1993, ISO 8528-2:1993. Reciprocating internal combustion engine driven alternating current generating sets. Specification for engines
BS 5760-14:1993, IEC 61160:1992 BS 5760-14:1993, IEC 61160:1992. Reliability of systems, equipment and components. Guide to formal design review
BS 7698-6:1993, ISO 8528-6:1993 BS 7698-6:1993, ISO 8528-6:1993. Reciprocating internal combustion engine driven alternating current generating sets. Test methods
BS 7698-5:1993, ISO 8528-5:1993 BS 7698-5:1993, ISO 8528-5:1993. Reciprocating internal combustion engine driven alternating current generating sets. Specification for generating sets
BS 7698-4:1993, ISO 8528-4:1993 BS 7698-4:1993, ISO 8528-4:1993. Reciprocating internal combustion engine driven alternating current generating sets. Specification for controlgear and switchgear
BS 7020-5.1:1993, ISO 2598-1:1992 BS 7020-5.1:1993, ISO 2598-1:1992. Analysis of iron ores. Methods for the determination of silicon content. Gravimetric methods
BS 7020-6.2:1993, ISO 4687-1:1992 BS 7020-6.2:1993, ISO 4687-1:1992. Analysis of iron ores. Methods for the determination of phosphorus content. Molybdenum blue spectrophotometric method
BS 7020-9.2:1993, ISO 9682-1:1991 BS 7020-9.2:1993, ISO 9682-1:1991. Analysis of iron ores. Methods for the determination of manganese content. Flame atomic absorption spectrometric method
BS 7020-11.1:1993, ISO 9683:1991 BS 7020-11.1:1993, ISO 9683:1991. Analysis of iron ores. Methods for the determination of vanadium content. BPHA spectrophotometric method
BS 7020-11.2:1993, ISO 9684:1991 BS 7020-11.2:1993, ISO 9684:1991. Analysis of iron ores. Methods for the determination of vanadium content. Flame atomic absorption spectrometric method
BS 7020-16:1993, ISO 9685:1991 BS 7020-16:1993, ISO 9685:1991. Analysis of iron ores. Methods for the determination of nickel and/or chromium contents: flame atomic absorption spectrometric method
BS 7020-18:1993, ISO 10204:1992 BS 7020-18:1993, ISO 10204:1992. Analysis of iron ores. Methods for the determination of magnesium content: flame atomic absorption spectrometric method
BS EN 27501-1:1993, ISO/IEC 7501-1:1991 BS EN 27501-1:1993, ISO/IEC 7501-1:1991. Identification cards. Machine readable travel documents. Machine readable passport
BS 2782:Part 1:Method 140B:1993, ISO 9773:1990 BS 2782:Part 1:Method 140B:1993, ISO 9773:1990. Methods of testing plastics. Thermal properties. Determination of the burning behaviour of flexible verti
BS 7020-15:1993, ISO 10203:1993 BS 7020-15:1993, ISO 10203:1993. Analysis of iron ores. Methods for the determination of calcium content: flame atomic absorption spectrometric method
BS 7020-8.2:1993, ISO 4688-1:1992 BS 7020-8.2:1993, ISO 4688-1:1992. Analysis of iron ores. Methods for the determination of aluminium content. Flame atomic absorption spectrometric method
BS 4F 120:1993 BS 4F 120:1993. Specification for continuous filament nylon sewing threads for aerospace purposes
BS 8204-4:1993 BS 8204-4:1993. Screeds, bases and in-situ floorings. Code of practice for terrazzo wearing surfaces
BS 7087-18:1993 BS 7087-18:1993. Herbs and spices ready for food use. Specification for dried rosemary (whole, rubbed and ground)
BS EN 61166:1993, IEC 61166:1993 BS EN 61166:1993, IEC 61166:1993. Specification for high-voltage alternating current circuit-breakers. Guide for seismic qualification of high-voltage alternating curr
BS EN 61120-4:1993, IEC 61120-4:1992 BS EN 61120-4:1993, IEC 61120-4:1992. Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape for professional use. Magnetic tape properties: d
BS EN 60244-11:1993, IEC 60244-11:1989 BS EN 60244-11:1993, IEC 60244-11:1989. Methods of measurement for radio transmitters. Transposers for FM sound broadcasting
BS EN 60192:1993 BS EN 60192:1993. Specification for low pressure sodium vapour lamps
BS EN 515:1993 BS EN 515:1993. Aluminium and aluminium alloys. Wrought products. Temper designations
BS EN 340:1993 BS EN 340:1993. Protective clothing. General requirements
BS 4115:1993 BS 4115:1993. Specification for compression knapsack sprayers
BS 7385-2:1993 BS 7385-2:1993. Evaluation and measurement for vibration in buildings. Guide to damage levels from groundborne vibration
BS 1344-21:1993, ISO 4532:1991 BS 1344-21:1993, ISO 4532:1991. Methods of testing vitreous enamel finishes. Determination of the resistance of vitreous enamelled articles to impact: pistol test
BS 7494-2:1993, IEC 60834-2:1993 BS 7494-2:1993, IEC 60834-2:1993. Performance and testing of teleprotection equipment of power systems. Analogue comparison system
BS 7705:1993, ISO 11169:1993 BS 7705:1993, ISO 11169:1993. Specification for brake systems for special wheeled forestry machines
BS 7712:1993, ISO 8999:1993 BS 7712:1993, ISO 8999:1993. Specification for graphical symbols for reciprocating internal combustion engines
BS EN 61040:1993, IEC 61040:1990 BS EN 61040:1993, IEC 61040:1990. Specification for power and energy measuring detectors, instruments and equipment for laser radiation
BS 7708:1993, ISO 9189:1993 BS 7708:1993, ISO 9189:1993. Specification for power presses, mechanical straight-sided high-speed type of 250 kN up to 4000 kN nominal force
BS 5724-2.11.2:1993, IEC 60601-2-11:1987/AMD 2:1993 BS 5724-2.11.2:1993, IEC 60601-2-11:1987/AMD 2:1993. Medical electrical equipment. Particular requirements for safety. Methods of test for radiation
BS 1747-12:1993, ISO 10313:1993 BS 1747-12:1993, ISO 10313:1993. Methods for measurement of air pollution. Determination of the mass concentration of ozone in ambient air: chemiluminescence method
BS EN ISO 787-10:1995 BS EN ISO 787-10:1995. General methods of test for pigments and extenders. Determination of density. Pyknometer method
BS EN 383:1993 BS EN 383:1993. Timber structures. Test methods. Determination of embedding strength and foundation values for dowel type fasteners
BS EN 409:1993 BS EN 409:1993. Timber structures. Test methods. Determination of the yield moment of dowel type fasteners. Nails
BS EN ISO/IEC 11172-1:1995 BS EN ISO/IEC 11172-1:1995. Information technology. Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s. Systems
BS EN ISO/IEC 11172-2:1995 BS EN ISO/IEC 11172-2:1995. Information technology. Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s. Video
BS EN ISO/IEC 11172-3:1995 BS EN ISO/IEC 11172-3:1995. Information technology. Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s. Audio
BS 7707:1993, ISO 9188:1993 BS 7707:1993, ISO 9188:1993. Specification for power presses, mechanical straight-sided single-action type from 400 kN up to and including 4000 kN nominal force
BS ISO/IEC 10177:1993 BS ISO/IEC 10177:1993. Information technology. Telecommunications and information exchange between systems. Provision of the connection-mode Network internal layer service by int
BS EN 590:1993 BS EN 590:1993. Specification for automotive diesel fuel
BS ISO/IEC TR 10735:1993 BS ISO/IEC TR 10735:1993. Information technology. Telecommunications and information exchange between systems. Standard group MAC addresses
BS ISO/IEC TR 10738:1993 BS ISO/IEC TR 10738:1993. Information technology. Local and metropolitan area networks. Token ring access method and physical layer specifications. Recommended practice for us
BS 5608:1993 BS 5608:1993. Specification for preformed rigid polyurethane (PUR) and polyisocyanurate (PIR) foams for thermal insulation of pipework and equipment
BS 6912-13:1993, ISO 5006-3:1993 BS 6912-13:1993, ISO 5006-3:1993. Safety of earth-moving machinery. Acceptance criteria for operator's field of view
BS 7693:1993, IEC 61147:1993 BS 7693:1993, IEC 61147:1993. Guide to uses of infra-red transmission and the prevention or control of interference between systems
BS 7713:1993, IEC 60944:1988 BS 7713:1993, IEC 60944:1988. Guide for the maintenance of silicone transformer liquids
BS EN 423:1993 BS EN 423:1993. Resilient floor coverings. Determination of the effect of stains
BS EN 424:1993 BS EN 424:1993. Resilient floor coverings. Determination of the effect of the simulated movement of a furniture leg
BS 6912-12:1993, ISO 5006-2:1993 BS 6912-12:1993, ISO 5006-2:1993. Safety of earth-moving machinery. Evaluation of operator's field of view
BS 6746C:1993 BS 6746C:1993. Colour chart for insulation and sheath of electric cables
BS 7564-10:1993, ISO 10073:1991 BS 7564-10:1993, ISO 10073:1991. Tools for moulding. Specification for dimensions of support pillars
BS 7568-30:1993, ISO 9448-9:1993 BS 7568-30:1993, ISO 9448-9:1993. Press tools. Specification for guide bushes: form B, ball cage bushes, plain, type 2
BS 7568-31:1993, ISO 9448-10:1992 BS 7568-31:1993, ISO 9448-10:1992. Press tools. Specification for guide bushes: form E, gliding bushes, flanged, type 2
BS 7568-32:1993, ISO 9448-11:1992 BS 7568-32:1993, ISO 9448-11:1992. Press tools. Specification for guide bushes: form F, ball cage bushes, flanged, type 2
BS 7682:1993 BS 7682:1993. Specification for stationary transformers in traction systems
BS EN 61131-3:1993, IEC 61131-3:1993 BS EN 61131-3:1993, IEC 61131-3:1993. Programmable controllers. Programming languages
BS ISO/IEC 10733:1993 BS ISO/IEC 10733:1993. Information technology. Telecommunications and information exchange between systems. Elements of management information related to OSI network layer standa
BS 7716:1993, IEC 60848:1988 BS 7716:1993, IEC 60848:1988. Preparation of function charts for control systems
BS EN 22768-1:1993, ISO 2768-1:1989 BS EN 22768-1:1993, ISO 2768-1:1989. General tolerances. Tolerances for linear and angular dimensions without individual tolerance indications
BS EN 61181:1993, IEC 61181:1993 BS EN 61181:1993, IEC 61181:1993. Impregnated insulating materials. Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
BS ISO/IEC 10641:1993 BS ISO/IEC 10641:1993. Information technology. Computer graphics and image processing. Conformance testing of implementations of graphics standards
BS 7704:1993, IEC 60836:1988 BS 7704:1993, IEC 60836:1988. Specifications for silicone liquids for electrical purposes
BS 7313-4:1993, ISO 8548-3:1993 BS 7313-4:1993, ISO 8548-3:1993. Prosthetics and orthotics. Method of describing upper limb amputation stumps
BS 7313-3:1993, ISO 8548-2:1993 BS 7313-3:1993, ISO 8548-2:1993. Prosthetics and orthotics. Method of describing lower limb amputation stumps
BS 5760-12:1993, IEC 60863:1986 BS 5760-12:1993, IEC 60863:1986. Reliability of systems, equipment and components. Guide to the presentation of reliability, maintainability and availability prediction
BS ISO/IEC 11319:1993 BS ISO/IEC 11319:1993. Information technology. 8 mm wide magnetic tape cartridge for information interchange. Helical scan recording
BS 6002-1:1993, ISO 3951:1989 BS 6002-1:1993, ISO 3951:1989. Sampling procedures for inspection by variables. Specification for single sampling plans indexed by acceptable quality level (AQL) for lot-
BS EN 60719:1993, IEC 60719:1992 BS EN 60719:1993, IEC 60719:1992. Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated vo
BS EN 60519-1:1993, IEC 60519-1:1984 BS EN 60519-1:1993, IEC 60519-1:1984. Safety in electroheat installations. General requirements
BS EN 426:1993 BS EN 426:1993. Resilient floor coverings. Determination of width, length, straightness and flatness of sheet material
BS EN 380:1993 BS EN 380:1993. Timber structures. Test methods. General principles for static load testing
BS 6130-1:1993 BS 6130-1:1993. Hose and hose assemblies for asphalt and bitumen. Specification for flexible metallic hose and hose assemblies
BS 6007:1993 BS 6007:1993. Specification for rubber-insulated cables for electric power and lighting
BS 2646-3:1993 BS 2646-3:1993. Autoclaves for sterilization in laboratories. Guide to safe use and operation
BS 5760-10.5:1993, IEC 61123:1991 BS 5760-10.5:1993, IEC 61123:1991. Reliability of systems, equipment and components. Guide to reliability testing. Compliance test plans for success ratio
BS EN 60952-1:1993, IEC 60952-1:1988 BS EN 60952-1:1993, IEC 60952-1:1988. Aircraft batteries. General test requirements and performance levels
BS EN 60952-2:1993, IEC 60952-2:1991 BS EN 60952-2:1993, IEC 60952-2:1991. Aircraft batteries. Design and construction requirements
BS CECC 00112-1:1993 BS CECC 00112-1:1993. Rule of Procedure 12. Voting procedures. CECC Rules of Procedure and specifications (excluding ENs)
BS EN 428:1993 BS EN 428:1993. Resilient floor coverings. Determination of overall thickness
BS EN 25978:1993, BS 3424-11:1993,ISO 5978:1990 BS EN 25978:1993, BS 3424-11:1993,ISO 5978:1990. Rubber- or plastics-coated fabrics. Determination of blocking resistance
BS 7568-33:1993, ISO 9183-2:1993 BS 7568-33:1993, ISO 9183-2:1993. Press tools. Wear plates for press dies, type B
BS 6840-2:1993, IEC 60268-2:1987 BS 6840-2:1993, IEC 60268-2:1987. Sound system equipment. Glossary of general terms and calculation methods
BS 1919-1:1993 BS 1919-1:1993. Hacksaw blades. Specification for hand and machine hacksaw blades
BS QC 790111:1993, IEC 60748-2-8:1993 BS QC 790111:1993, IEC 60748-2-8:1993. Specification for harmonized system of quality assessment for electronic components. Semiconductor devices. Integrated circ
BS 4727-3:Group 04:1976 BS 4727-3:Group 04:1976. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to telecommunications and electronics.
BS 7562-5:1993 BS 7562-5:1993. Planning, design and installation of irrigation schemes. Guide for irrigation equipment
BS 2011:Part 4:Section 4.4:1993, IEC 60068-4:1987 BS 2011:Part 4:Section 4.4:1993, IEC 60068-4:1987. Environmental testing. Miscellaneous. Information for specification writers. Test summaries
BS EN 60695-5-1:1993 BS EN 60695-5-1:1993. Fire hazard testing. Assessment of potential corrosion damage by fire effluent. General guidance
BS EN 61175:1993, IEC 61175:1993 BS EN 61175:1993, IEC 61175:1993. Designations for signals and connections
BS EN 623-2:1993 BS EN 623-2:1993. Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of density and porosity
BS 1994:1993 BS 1994:1993. Specification for dichloromethane (methylene chloride)
BS 375:1993 BS 375:1993. Specification for refined nickel
BS 3375-2:1993 BS 3375-2:1993. Management services. Guide to method study
BS 3375-3:1993 BS 3375-3:1993. Management services. Guide to work measurement
BS 3375-4:1993 BS 3375-4:1993. Management services. Guide to work performance control
DD 216:1993 DD 216:1993. Method for determination of chloride content of fresh concrete
BS ISO/IEC 10729-1:1993 BS ISO/IEC 10729-1:1993. Information technology. Open Systems Interconnection. Conformance test suite for the presentation layer. Test suite structure and test purposes for the
BS EN 29865:1993, ISO 9865:1991 BS EN 29865:1993, ISO 9865:1991. Textiles. Determination of water repellency of fabrics by the Bundesmann rain-shower test
BS EN 27888:1993, BS 6068-2.35:1993,ISO 7888:1985 BS EN 27888:1993, BS 6068-2.35:1993,ISO 7888:1985. Water quality. Method for the determination of electrical conductivity
BS EN 25663:1993, ISO 5663:1984 BS EN 25663:1993, ISO 5663:1984. Water quality. Determination of Kjeldahl nitrogen. Method after mineralization with selenium
BS ISO/IEC 11559:1993 BS ISO/IEC 11559:1993. Information technology. Data interchange on 12,7 mm wide 18-track magnetic tape cartridges. Extended format
DD ENV 41115:1993 DD ENV 41115:1993. Information technology. Functional standard for profiles T/C31 and T/D31. Analogue telephone circuit. Leased (permanent) service (COTS + CONS)
DD ENV 41116:1993 DD ENV 41116:1993. Information technology. Functional standard for profiles T/C32 and T/D32. Analogue telephone circuit. Dial-up (PSTN) (COTS + CONS)
BS EN 61106:1993, IEC 61106:1993 BS EN 61106:1993, IEC 61106:1993. Videodisks. Methods of measurement for parameters
BS EN 60843-3:1993, IEC 60843-3:1993 BS EN 60843-3:1993, IEC 60843-3:1993. Helical-scan video tape cassette system using 8 mm magnetic tape. 8 mm video. High-band specifications for Hi 8
BS EN 60603-7:1993, IEC 60603-7:1990 BS EN 60603-7:1993, IEC 60603-7:1990. Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for connectors, 8-way, including fix
BS 6068-2.45:1993, ISO 9965:1993 BS 6068-2.45:1993, ISO 9965:1993. Water quality. Physical, chemical and biochemical methods. Determination of selenium by atomic absorption spectrometry
BS 5750-14:1993, EN 60300-1:1993,IEC 60300-1:1993,ISO 9000-4:1993 BS 5750-14:1993, EN 60300-1:1993,IEC 60300-1:1993,ISO 9000-4:1993. Quality systems. Guide to dependability programme management
BS 5502-22:1993 BS 5502-22:1993. Buildings and structures for agriculture. Code of practice for design, construction and loading
BS 7706:1993 BS 7706:1993. Guide to calibration and setting-up of the ultrasonic time of flight diffraction (TOFD) technique for the detection, location and sizing of flaws
BS 2559:1994 BS 2559:1994. Specification for screwdrivers and screwdriver accessories
BS 5126-1:1993 BS 5126-1:1993. Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for direct-on-line motor starters
BS 5126-2:1993 BS 5126-2:1993. Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for circuit breaker units
BS 5126-3:1993 BS 5126-3:1993. Mining type flameproof supply and control units for use on systems up to 1100 V. Specification for air-cooled lighting transformer units
BS EN 29455-5:1993, ISO 9455-5:1992 BS EN 29455-5:1993, ISO 9455-5:1992. Soft soldering fluxes. Test methods. Copper mirror test
BS EN 60999:1993 BS EN 60999:1993. Connecting devices. Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors
BS EN 60966-1:1993, IEC 60966-1:1988 BS EN 60966-1:1993, IEC 60966-1:1988. Radio frequency and coaxial cable assemblies. General requirements and test methods
BS EN 10025:1993 BS EN 10025:1993. Hot rolled products of non-alloy structural steels. Technical delivery conditions
BS 5760-13.1:1993, IEC 60605-3-1:1986 BS 5760-13.1:1993, IEC 60605-3-1:1986. Reliability of systems, equipment and components. Guide to reliability test conditions for consumer equipment. Conditions p
BS 5760-13.2:1993, IEC 60605-3-2:1986 BS 5760-13.2:1993, IEC 60605-3-2:1986. Reliability of systems, equipment and components. Guide to reliability test conditions for consumer equipment. Conditions p
BS EN 10034:1993 BS EN 10034:1993. Structural steel I and H sections. Tolerances on shape and dimensions
BS 6911-9:1993, ISO 10268:1993 BS 6911-9:1993, ISO 10268:1993. Testing earth-moving machinery. Verification of retarder capability of dumpers and tractor-scrapers
BS 6914-8:1993, ISO 7135:1993 BS 6914-8:1993, ISO 7135:1993. Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Terminology and commercial specifications for hyd
BS EN 25080:1993 BS EN 25080:1993. Sisal agricultural twines
BS EN 352-1:1993 BS EN 352-1:1993. Hearing protectors. Safety requirements and testing. Ear muffs
BS EN 352-2:1993 BS EN 352-2:1993. Hearing protectors. Safety requirements and testing. Ear plugs
BS EN 10021:1993 BS EN 10021:1993. General technical delivery requirements for steel and iron products
BS EN 29455-8:1993, ISO 9455-8:1991 BS EN 29455-8:1993, ISO 9455-8:1991. Soft soldering fluxes. Test methods. Determination of zinc content
BS EN 29455-11:1993, ISO 9455-11:1991 BS EN 29455-11:1993, ISO 9455-11:1991. Soft soldering fluxes. Test methods. Solubility of flux residues
BS EN 29455-14:1993, ISO 9455-14:1991 BS EN 29455-14:1993, ISO 9455-14:1991. Soft soldering fluxes. Test methods. Assessment of tackiness of flux residues
BS EN 60721-3-9:1993, IEC 60721-3-9:1993 BS EN 60721-3-9:1993, IEC 60721-3-9:1993. Classification of environmental conditions. Classification of groups of environmental parameters and their severities
BS EN 61179:1993, IEC 61179:1993 BS EN 61179:1993, IEC 61179:1993. Specification for helical-scan digital composite video cassette recording system using 19 mm magnetic tape, format D2 (NTSC, PAL, PAL
BS 1881-103:1993 BS 1881-103:1993. Testing concrete. Method for determination of compacting factor
BS 5760-13.4:1993, IEC 60605-3-4:1992 BS 5760-13.4:1993, IEC 60605-3-4:1992. Reliability of systems, equipment and components. Guide to reliability test conditions for consumer equipment. Conditions p
BS EN 429:1993 BS EN 429:1993. Resilient floor coverings. Determination of the thickness of layers
BS ISO/IEC 10165-1:1993 BS ISO/IEC 10165-1:1993. Information technology. Open systems interconnection. Structure of management information. Management information model
BS AU 253:1993, ISO 11406:1993 BS AU 253:1993, ISO 11406:1993. Specification for interchangeability of mechanical coupling between towing vehicles with rear-mounted couplings and drawbar trailers
BS EN 20187:1993, ISO 187:1990 BS EN 20187:1993, ISO 187:1990. Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of
BS EN 45020:1993 BS EN 45020:1993. Glossary of terms for standardization and related activities
BS EN 60143-1:1993 BS EN 60143-1:1993. Series capacitors for power systems. General. Performance, testing and rating. Safety requirements. Guide for installation
BS EN 60244-13:1993, IEC 60244-13:1991 BS EN 60244-13:1993, IEC 60244-13:1991. Methods of measurement for radio transmitters. Performance characteristics for FM sound broadcasting
BS EN 60998-2-1:1993 BS EN 60998-2-1:1993. Connecting devices for low voltage circuits for household and similar purposes. Particular requirements for connecting devices as separate entities with scre
DD ENV 658-6:1993 DD ENV 658-6:1993. Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of shear strength by double-punch shearing
BS 308-1:1993 BS 308-1:1993. Engineering drawing practice. Recommendations for general principles
BS EN 60382:1993, IEC 60382:1991 BS EN 60382:1993, IEC 60382:1991. Analogue pneumatic signal for process control systems
BS EN 60904-3:1993, IEC 60904-3:1989 BS EN 60904-3:1993, IEC 60904-3:1989. Photovoltaic devices. Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradian
BS EN 60904-1:1993, IEC 60904-1:1987 BS EN 60904-1:1993, IEC 60904-1:1987. Photovoltaic devices. Measurement of photovoltaic current-voltage characteristics
BS ISO 4880:1993 BS ISO 4880:1993. Burning behaviour of textiles and textile products. Vocabulary
BS 5760-13.3:1993, IEC 60605-3-3:1992 BS 5760-13.3:1993, IEC 60605-3-3:1992. Reliability of systems, equipment and components. Guide to reliability test conditions for consumer equipment. Conditions p
BS 4285-3.15:1993, ISO 10560:1993 BS 4285-3.15:1993, ISO 10560:1993. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Dete
DD ENV 839:1994 DD ENV 839:1994. Wood preservatives. Determination of the preventive efficacy against wood-destroying basidiomycete fungi
BS 5763:Part 4:1993, ISO 6579:1993 BS 5763:Part 4:1993, ISO 6579:1993. Methods for microbiological examination of food and animal feeding stuffs. Detection of Salmonella
BS 5763-10:1993, ISO 7402:1993 BS 5763-10:1993, ISO 7402:1993. Methods for microbiological examination of food and animal feeding stuffs. Enumeration of Enterobacteriaceae
BS EN 631-1:1993 BS EN 631-1:1993. Materials and articles in contact with foodstuffs. Catering containers. Specification for dimensions of containers
BS EN 208:1994 BS EN 208:1994. Specification for personal eye-protectors used for adjustment work on lasers and laser systems
BS EN 2157-1:1993 BS EN 2157-1:1993. Steel. Forging stock and forgings. Technical specifications. General requirements
BS EN 2157-2:1993 BS EN 2157-2:1993. Steel. Forging stock and forgings. Technical specifications. Forging stock
BS EN 2157-3:1993 BS EN 2157-3:1993. Steel. Forging stock and forgings. Technical specifications. Pre-production and production forgings
BS 7714:1993 BS 7714:1993. Guide for care and handling of seals for fluid power applications
BS EN 60244-10:1993, IEC 60244-10:1986 BS EN 60244-10:1993, IEC 60244-10:1986. Methods of measurement for radio transmitters. Methods of measurement for television transmitters and transposers employi
BS 6717-1:1993 BS 6717-1:1993. Precast concrete paving blocks. Specification for paving blocks
BS EN 10056-2:1993 BS EN 10056-2:1993. Specification for structural steel equal and unequal angles. Tolerances on shape and dimensions
BS EN 50077:1993 BS EN 50077:1993. Specification for low profile connectors (IS-1) for implantable pacemakers
BS 4127:1994 BS 4127:1994. Specification for light gauge stainless steel tubes, primarily for water applications
BS 3487:Part 2:1993, ISO 5361-2:1993 BS 3487:Part 2:1993, ISO 5361-2:1993. Tracheal tubes. Oro-tracheal and naso-tracheal tubes of the Magill type (plain and cuffed)
BS 3811:1993 BS 3811:1993. Glossary of terms used in terotechnology
BS 5354:Part 1:1993, IEC 60763-1:1983 BS 5354:Part 1:1993, IEC 60763-1:1983. Specification for laminated pressboard for electrical purposes. Definitions, classification and general requirements
BS 6149:Part 2:1993, ISO 5366-2:1993 BS 6149:Part 2:1993, ISO 5366-2:1993. Tracheostomy tubes. Basic requirements for tubes for adults
BS ISO 8116-6:1990 BS ISO 8116-6:1990. Textile machinery and accessories. Beams for winding. Beams for ribbon weaving and ribbon knitting. Terminology and main dimensions
BS ISO 8118:1986 BS ISO 8118:1986. Weaving machines. Temple cylinders
BS ISO 8640-1:1990 BS ISO 8640-1:1990. Textile machinery and accessories. Flat warp knitting machines. Vocabulary. Driving mechanisms, supports and knitting elements
BS ISO 8640-2:1990 BS ISO 8640-2:1990. Textile machinery and accessories. Flat warp knitting machines. Vocabulary. Warp let-off, fabric take-up and batching
BS EN 60255-21-3:1995 BS EN 60255-21-3:1995. Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Seismic tests
BS ISO 9947:1991 BS ISO 9947:1991. Textile machinery and accessories. Two-for-one twisters. Vocabulary
BS EN 23758:1994, ISO 3758:1991 BS EN 23758:1994, ISO 3758:1991. Textiles. Care labelling code using symbols
BS EN 190110:1994 BS EN 190110:1994. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: digital microprocessor integrated circuits
DD 213:1993 DD 213:1993. Method for determination of the indirect tensile stiffness modulus of bituminous mixtures
BS EN 289:1994 BS EN 289:1994. Rubber and plastics machinery. Compression and transfer moulding presses. Safety requirements for the design
BS EN 485-1:1994 BS EN 485-1:1994. Aluminium and aluminium alloys. Sheet, strip and plate. Technical conditions for inspection and delivery
BS EN 485-3:1994 BS EN 485-3:1994. Aluminium and aluminium alloys. Sheet, strip and plate. Tolerances on shape and dimensions for hot-rolled products
BS EN 485-4:1994 BS EN 485-4:1994. Aluminium and aluminium alloys. Sheet, strip and plate. Tolerances on shape and dimensions for cold-rolled products
BS EN 633:1994 BS EN 633:1994. Cement-bonded particleboards. Definition and classification
BS EN 27726:1994, ISO 7726:1985 BS EN 27726:1994, ISO 7726:1985. Thermal environments. Instruments and methods for measuring physical quantities
BS EN 46001:1994 BS EN 46001:1994. Application of EN 29001 (BS 5750:Part 1) to the manufacture of medical devices
BS EN 46002:1994 BS EN 46002:1994. Application of EN 29002 (BS 5750:Part 2) to the manufacture of medical devices
BS EN 50081-2:1994 BS EN 50081-2:1994. Electromagnetic compatibility. Generic emission standard. Industrial environment
BS 5S 99:1994 BS 5S 99:1994. Specification for 2.5% nickel-chromium-molybdenum (high carbon) steel billets, bars, forgings and parts (1230-1420 MPa: limiting ruling section 150 mm)
BS AU 50-1.1.4:1994, ISO 10191:1993 BS AU 50-1.1.4:1994, ISO 10191:1993. Tyres and wheels. Tyres. Car tyres. Method of test for verifying tyre capabilities
BS AU 50-1.2.4:1994, ISO 10454:1993 BS AU 50-1.2.4:1994, ISO 10454:1993. Tyres and wheels. Tyres. Commercial vehicle tyres. Method of test for verifying tyre capabilities
BS AU 50-2.3:1994 BS AU 50-2.3:1994. Tyres and wheels. Wheels and rims. Specification for road-wheel nuts, studs and bolts for commercial vehicles
BS 903-A61:1994 BS 903-A61:1994. Physical testing of rubber. Determination of the frictional properties of rubber
BS 5950-4:1994 BS 5950-4:1994. Structural use of steelwork in building. Code of practice for design of composite slabs with profiled steel sheeting
BS 6043-1.13:1994 BS 6043-1.13:1994. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulfur content (routine method)
BS 7700:1994, ISO 10601:1993 BS 7700:1994, ISO 10601:1993. Micaceous iron oxide pigments for paints. Specifications and test methods
BS 7711-2:1994 BS 7711-2:1994. Respiratory therapy equipment. Specification for air entrainment devices
BS 7723-1:1994, ISO 7507-1:1993 BS 7723-1:1994, ISO 7507-1:1993. Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products. Strapping method
BS 7723-2:1994, ISO 7507-2:1993 BS 7723-2:1994, ISO 7507-2:1993. Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products. Optical-reference-line method
BS 7723-3:1994, ISO 7507-3:1993 BS 7723-3:1994, ISO 7507-3:1993. Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products. Optical-triangulation method
BS 7252-2:1994, ISO 5832-2:1993 BS 7252-2:1994, ISO 5832-2:1993. Metallic materials for surgical implants. Specification for unalloyed titanium
BS 7252-5:1994, ISO 5832-5:1993 BS 7252-5:1994, ISO 5832-5:1993. Metallic materials for surgical implants. Specification for wrought cobalt-chromium-tungsten-nickel alloy
BS 7252:Part 10:1994, ISO 5832-10:1993 BS 7252:Part 10:1994, ISO 5832-10:1993. Metallic materials for surgical implants. Specification for wrought titanium 5-aluminium 2.5-iron alloy
DD ENV 1064:1994 DD ENV 1064:1994. Medical informatics. Standards communications protocol. Computer-assisted electrocardiography
DD ENV 1148:1994 DD ENV 1148:1994. Heat exchangers. Water to water heat exchangers for district heating. Test procedure for establishing the performance
BS EN 27243:1994, ISO 7243:1989 BS EN 27243:1994, ISO 7243:1989. Hot environments. Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
BS EN 28996:1994, ISO 8996:1990 BS EN 28996:1994, ISO 8996:1990. Ergonomics. Determination of metabolic heat production
BS 7711-1:1994 BS 7711-1:1994. Respiratory therapy equipment. Specification for tubing and connectors
DD ENV 1068:1994 DD ENV 1068:1994. Medical informatics. Health care information interchange. Registration of coding schemes
DD ENV 821-3:1994 DD ENV 821-3:1994. Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Determination of specific heat capacity
BS EN 10052:1994 BS EN 10052:1994. Vocabulary of heat treatment terms for ferrous products
BS 3G 198-3:1994 BS 3G 198-3:1994. Sleeves for aircraft electric cables and equipment wires. Specification for heat-shrinkable sleeving for binding, insulation and identification
BS 4840-2:1994 BS 4840-2:1994. Rigid polyurethane (PUR) foam in slab form. Specification for PUR foam for use in refrigerator cabinets, cold rooms and stores
BS 7715:1994 BS 7715:1994. Specification for prevailing torque type bolts, screws and studs with non-metallic prevailing torque elements incorporated into the thread
BS EN 71-2:1994, BS 5665-2:1994 BS EN 71-2:1994, BS 5665-2:1994. Safety of toys. Flammability
BS EN 10152:1994 BS EN 10152:1994. Specification for electrolytically zinc coated cold rolled steel flat products. Technical delivery conditions
DD ENV 1006:1994 DD ENV 1006:1994. Advanced technical ceramics. Methods of testing monolithic ceramics. Guidance on the sampling and selection of test pieces
BS 3484-2:1994 BS 3484-2:1994. Record inks. Specification for permanent inks
BS 5173-103.13:1994 BS 5173-103.13:1994. Methods of test for rubber and plastics hoses and hose assemblies. Physical tests. Determination of resistance to fire
BS 7087-19:1994 BS 7087-19:1994. Herbs and spices ready for food use. Specification for fennel seeds (whole and ground)
BS EN 582:1994 BS EN 582:1994. Thermal spraying. Determination of tensile adhesive strength
BS EN 1021-2:1994 BS EN 1021-2:1994. Furniture. Assessment of the ignitability of upholstered furniture. Ignition source: match flame equivalent
BS EN 61115:1994, IEC 61115:1992 BS EN 61115:1994, IEC 61115:1992. Expression of performance of sample handling systems for process analyzers
BS EN 188000:1994 BS EN 188000:1994. Generic specification for optical fibres
BS EN 24501:1994, ISO 4501:1978 BS EN 24501:1994, ISO 4501:1978. Hardmetals. Determination of titanium. Photometric peroxide method
BS EN 1021-1:1994 BS EN 1021-1:1994. Furniture. Assessment of the ignitability of upholstered furniture. Ignition source: smouldering cigarette
BS ISO 6342:1993 BS ISO 6342:1993. Micrographics. Aperture cards. Method of measuring thickness of buildup area
BS ISO 7565:1993 BS ISO 7565:1993. Micrographics. Readers for transparent microforms. Measurement of characteristics
BS 4088-1.1:1994 BS 4088-1.1:1994. Carpet cleaning products. Methods of sampling and test. General methods for formulations used in liquid form
BS 4088-2:1994 BS 4088-2:1994. Carpet cleaning products. Specification for high foam formulations used in liquid form
BS 5350-C12:1994, ISO 11339:1993 BS 5350-C12:1994, ISO 11339:1993. Methods of test for adhesives. Adhesively bonded joints: mechanical tests. 180° peel test for flexible-to-flexible bonded assemblies
BS ISO 366-4:1992 BS ISO 366-4:1992. Textile machinery and accessories. Reeds. Plastic bound metal reeds. Dimensions and designation
BS EN 61118:1994, IEC 61118:1993 BS EN 61118:1994, IEC 61118:1993. Specification for helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape. Type M2
BS EN 23909:1994, ISO 3909:1976 BS EN 23909:1994, ISO 3909:1976. Hardmetals. Determination of cobalt. Potentiometric method
BS 6500:1994 BS 6500:1994. Specification for insulated flexible cords and cables
BS 4940-1:1994 BS 4940-1:1994. Technical information on construction products and services. Guide for management
BS EN 646:1994 BS EN 646:1994. Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board
BS EN 648:1994 BS EN 648:1994. Paper and board intended to come into contact with foodstuffs. Determination of the fastness of fluorescent whitened paper and board
BS EN 61105:1994, IEC 61105:1991 BS EN 61105:1994, IEC 61105:1991. Specification for reference tapes for video tape recorder systems
BS EN 61120-3:1994, IEC 61120-3:1991 BS EN 61120-3:1994, IEC 61120-3:1991. Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use. Format B
BS 1016-100:1994 BS 1016-100:1994. Methods for analysis and testing of coal and coke. General introduction and methods for reporting results
BS 6840-11:1994, IEC 60268-11:1987 BS 6840-11:1994, IEC 60268-11:1987. Sound system equipment. Specification for application of connectors for the interconnection of sound system components
BS 4841-3:1994 BS 4841-3:1994. Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications. Specification for two types of laminated board (roofboards) with auto-adhesively bond
BS 4940-2:1994 BS 4940-2:1994. Technical information on construction products and services. Guide to content and arrangement
BS 3531-6.3:1994, ISO 5838-3:1993 BS 3531-6.3:1994, ISO 5838-3:1993. Implants for osteosynthesis. Skeletal pins and wires. Specification for Kirschner skeletal wires
BS 6387:1994 BS 6387:1994. Specification for performance requirements for cables required to maintain circuit integrity under fire conditions
BS 4940-3:1994 BS 4940-3:1994. Technical information on construction products and services. Guide to presentation
BS EN 60068-2-61:1994, IEC 60068-2-61:1991 BS EN 60068-2-61:1994, IEC 60068-2-61:1991. Environmental testing. Test methods. Test Z/ABDM. Climatic sequence
BS 5911-230:1994 BS 5911-230:1994. Precast concrete pipes, fittings and ancillary products. Specification for road gullies and gully cover slabs
BS EN 61120-2:1994, IEC 61120-2:1991 BS EN 61120-2:1994, IEC 61120-2:1991. Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use. Format A
BS 7750:1994 BS 7750:1994. Specification for environmental management systems
PD 6539:1994 PD 6539:1994. Guide to methods for the assessment of the influence of crack growth on the significance of defects in components operating at high temperatures
BS 4267-10:1994 BS 4267-10:1994. Ammonium nitrate. Method for determination of matter soluble in diethyl ether
BS 4267-11:1994 BS 4267-11:1994. Ammonium nitrate. Method for determination of inorganic matter and grit insoluble in water
BS 4311-2:1994 BS 4311-2:1994. Specification for gauge blocks and accessories. Accessories
BS EN 61122:1994, IEC 61122:1992 BS EN 61122:1994, IEC 61122:1992. Specification for still video floppy disk magnetic recording system
BS EN 61176:1994, IEC 61176:1993 BS EN 61176:1994, IEC 61176:1993. Hand-held electric mains voltage operated circular saws. Methods for measuring the performance
BS EN 382-2:1994 BS EN 382-2:1994. Fibreboards. Determination of surface absorption. Fireboards. Determination of surface absorption. Test methods for hardboards
BS EN 644:1994 BS EN 644:1994. Paper. Untrimmed sizes. Primary range and supplementary range designation and tolerances. Expression of direction of manufacture
BS EN 3045:1994 BS EN 3045:1994. Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads
BS EN 3046:1994 BS EN 3046:1994. Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads
BS EN 3047:1994 BS EN 3047:1994. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads
BS EN 22063:1994 BS EN 22063:1994. Metallic and other inorganic coatings. Thermal spraying. Zinc, aluminium and their alloys
BS EN 25136:1994, ISO 5136:1990 BS EN 25136:1994, ISO 5136:1990. Acoustics. Determination of sound power radiated into a duct by fans. In-duct method
BS EN 26330:1994, ISO 6330:1984 BS EN 26330:1994, ISO 6330:1984. Textiles. Domestic washing and drying procedures for textile testing
BS EN 45501:1994 BS EN 45501:1994. Specification for metrological aspects of non-automatic weighing instruments
BS EN 60570:1994 BS EN 60570:1994. Electrical supply track systems for luminaires
BS ISO/IEC 9834-2:1993 BS ISO/IEC 9834-2:1993. Information technology. Open systems interconnection. Procedures for the operation of OSI registration authorities. Registration procedures for OSI docum
BS ISO/IEC 9834-6:1993 BS ISO/IEC 9834-6:1993. Information technology. Open systems interconnection. Procedures for the operation of OSI registration authorities. Application processes and application
BS ISO/IEC 10164-6:1993 BS ISO/IEC 10164-6:1993. Information technology. Open systems interconnection. Systems management. Log control function
BS QC 750109:1993, IEC 60747-2-2:1993 BS QC 750109:1993, IEC 60747-2-2:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Rectifier
BS AU 251:1994 BS AU 251:1994. Specification for performance of automotive laminated windscreen repair systems
BS 6001-4:1994, ISO 8422:1991 BS 6001-4:1994, ISO 8422:1991. Sampling procedures for inspection by attributes. Specification for sequential sampling plans
BS EN 60901:1994, IEC 60901:1987 BS EN 60901:1994, IEC 60901:1987. Specification for single-capped fluorescent lamps. Safety and performance requirements
BS 1747-13:1994, ISO 9855:1993 BS 1747-13:1994, ISO 9855:1993. Methods for measurement of air pollution. Determination of the particulate lead content of aerosols collected on filters: atomic absorpti
BS EN 25077:1994, ISO 5077:1984 BS EN 25077:1994, ISO 5077:1984. Textiles. Determination of dimensional change in washing and drying
BS 7007-2:1994, ISO 3919:1993 BS 7007-2:1994, ISO 3919:1993. Abrasive products. Specification for designation and dimensions of coated abrasive flap wheels with shafts
BS 7211:1994 BS 7211:1994. Specification for thermosetting insulated cables (non-armoured) for electric power and lighting with low emission of smoke and corrosive gases when affected by fire
BS 7655:Part 5:Section 5.1:1994 BS 7655:Part 5:Section 5.1:1994. Specification for insulating and sheathing materials for cables. Cross-linked insulating compounds having low emission of corrosive gas
BS 7655:Part 6:Section 6.1:1994 BS 7655:Part 6:Section 6.1:1994. Specification for insulating and sheathing materials for cables. Thermoplastic sheathing compounds having low emission of corrosive gas
BS 7725-1:1994, IEC 61223-1:1993 BS 7725-1:1994, IEC 61223-1:1993. Evaluation and routine testing in medical imaging departments. General
BS 7725-2.1:1994, IEC 61223-2-1:1993 BS 7725-2.1:1994, IEC 61223-2-1:1993. Evaluation and routine testing in medical imaging departments. Constancy tests. Method for film processors
BS 7725-2.2:1994, IEC 61223-2-2:1993 BS 7725-2.2:1994, IEC 61223-2-2:1993. Evaluation and routine testing in medical imaging departments. Constancy tests. Method for radiographic cassettes and film ch
BS 7725-2.3:1994, IEC 61223-2-3:1993 BS 7725-2.3:1994, IEC 61223-2-3:1993. Evaluation and routine testing in medical imaging departments. Constancy tests. Method for darkroom safelight conditions
BS 7730:1994, ISO 9583:1993 BS 7730:1994, ISO 9583:1993. Method for liquid penetrant inspection of metallic surgical implants
BS 7731:1994, ISO 9584:1993 BS 7731:1994, ISO 9584:1993. Method for radiographic examination of cast metallic surgical implants
BS 7732:1994, IEC 60652:1979 BS 7732:1994, IEC 60652:1979. Guide to loading tests on overhead line towers
BS 7734:1994, ISO 8835-2:1993 BS 7734:1994, ISO 8835-2:1993. Specification for anaesthetic circle breathing systems
BS EN 60034-6:1994, IEC 60034-6:1991 BS EN 60034-6:1994, IEC 60034-6:1991. Rotating electrical machines. Methods of cooling (IC Code)
BS ISO 8119-3:1992 BS ISO 8119-3:1992. Textile machinery and accessories. Needles for knitting machines. Terminology. Compound needles
BS AU 50-1.5.2:1994, ISO 3739-1:1992 BS AU 50-1.5.2:1994, ISO 3739-1:1992. Tyres and wheels. Tyres. Industrial vehicle tyres. Specification for pneumatic tyres (metric series) on 5° tapered or flat ba
BS AU 50-1.5.3:1994, ISO 3739-2:1992 BS AU 50-1.5.3:1994, ISO 3739-2:1992. Tyres and wheels. Tyres. Industrial vehicle tyres. Specification for pneumatic tyres (metric series) on 5° tapered or flat ba
BS AU 50-1.5.6:1994, ISO 10500:1991 BS AU 50-1.5.6:1994, ISO 10500:1991. Tyres and wheels. Tyres. Industrial vehicle tyres. Specification for cylindrical and conical base rubber solid tyres (metric se
BS EN 645:1994 BS EN 645:1994. Paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract
BS EN 647:1994 BS EN 647:1994. Paper and board intended to come into contact with foodstuffs. Preparation of a hot water extract
BS EN 60870-5-4:1994, IEC 60870-5-4:1993 BS EN 60870-5-4:1994, IEC 60870-5-4:1993. Telecontrol equipment and systems. Transmission protocols. Definition and coding of application information elements
BS EN 60336:1995, IEC 60336:1993 BS EN 60336:1995, IEC 60336:1993. X-ray tube assemblies for medical diagnosis. Characteristics of focal spots
BS EN 2072:1994 BS EN 2072:1994. Aluminium alloy AL-P1050A-H14. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2092:1994 BS EN 2092:1994. Aluminium alloy AL-P7075-T6 or T62. Clad sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2693:1994 BS EN 2693:1994. Aluminium alloy. AL-P5086-H111. Sheet and strip 0,3 mm ≤ a ≤ 6 mm
BS EN 2694:1994 BS EN 2694:1994. Aluminium alloy. AL-P6061-T6 or T62. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2695:1994 BS EN 2695:1994. Aluminium alloy. AL-P6081-T6. Sheet and strip 0,3 mm ≤ a ≤ 6 mm
BS EN 2696:1994 BS EN 2696:1994. Aluminium alloy. AL-P7075-T6 or T62. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS 5049-1:1994, CISPR 18-1:1982 BS 5049-1:1994, CISPR 18-1:1982. Radio interference characteristics of overhead power lines and high-voltage equipment. Description of phenomena
BS EN 2591-A2:1994 BS EN 2591-A2:1994. Elements of electrical and optical connection. Test methods. Examination of dimensions and mass
BS EN 2591-B2:1994 BS EN 2591-B2:1994. Elements of electrical and optical connection. Test methods. Contact resistance at rated current
BS EN 2591-B3:1994 BS EN 2591-B3:1994. Elements of electrical and optical connection. Test methods. Electrical continuity at microvolt level
BS EN 2591-B4:1994 BS EN 2591-B4:1994. Elements of electrical and optical connection. Test methods. Discontinuity of contacts in the microsecond range
BS EN 2591-B5:1994 BS EN 2591-B5:1994. Elements of electrical and optical connection. Test methods. Housing (shell) electrical continuity
BS EN 2591-B6:1994 BS EN 2591-B6:1994. Elements of electrical and optical connection. Test methods. Measurement of insulation resistance
BS EN 2591-B7:1994 BS EN 2591-B7:1994. Elements of electrical and optical connection. Test methods. Voltage proof test
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
