BIS Standards Catalogue
BS EN 61023:1993, IEC 61023:1990 BS EN 61023:1993, IEC 61023:1990. Marine speed and distance measuring equipment (SDME). Operational and performance requirements. Methods of testing and required test
BS ISO/IEC 8881:1989 BS ISO/IEC 8881:1989. Information processing systems. Data communications. Use of the X.25 packet level protocol in local area networks
BS ISO/IEC 9549:1990 BS ISO/IEC 9549:1990. Information technology. Galvanic isolation of balanced interchange circuits
BS ISO/IEC TR 9575:1990 BS ISO/IEC TR 9575:1990. Information technology. Telecommunications and information exchange between systems. OSI routeing framework
BS ISO/IEC 10022:1990 BS ISO/IEC 10022:1990. Information technology. Open systems interconnection. Physical service definition
BS 47-1:1991 BS 47-1:1991. Fishplates for railway rails. Specification for rolled steel fishplates
BS 490:Part 11:Section 11.3:1991 BS 490:Part 11:Section 11.3:1991. Conveyor and elevator belting. Methods of test for safety. Drum friction tests
BS 1902-11:1991 BS 1902-11:1991. Methods of testing refractory materials. Refractory mortars and putties
BS 4124:1991 BS 4124:1991. Methods for ultrasonic detection of imperfections in steel forgings
BS 5131-1.1:1991 BS 5131-1.1:1991. Methods of test for footwear and footwear materials. Adhesives. Resistance of adhesive joints to heat (creep test)
BS 6083-3:1991, IEC 60118-3:1983 BS 6083-3:1991, IEC 60118-3:1983. Hearing aids. Methods for measurement of electroacoustical characteristics of hearing aid equipment not entirely worn on the listener
BS ISO 9282-1:1988 BS ISO 9282-1:1988. Information processing. Coded representation of pictures. Encoding principles for picture representation in a 7-bit or 8-bit environment
BS 490-11.2:1991 BS 490-11.2:1991. Conveyor and elevator belting. Methods of test for safety. Low energy and high energy propane gallery tests
BS 3935:1991 BS 3935:1991. Guide to classification and marking of cattle hides and calfskins
BS 5055:1991 BS 5055:1991. Specification for elastomer-insulated cables for electric signs and high-voltage luminous-discharge-tube installations
BS 5139:1991 BS 5139:1991. Method of specifying general purpose polypropylene and propylene copolymer materials for moulding and extrusion
BS 5815-3:1991 BS 5815-3:1991. Sheets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector. Specification for counterpanes
BS 7165:1991 BS 7165:1991. Recommendations for achievement of quality in software
BS 7388:1991 BS 7388:1991. Guide for prevention of leaks from hydraulic fluid power systems
BS 8215:1991 BS 8215:1991. Code of practice for design and installation of damp-proof courses in masonry construction
BS EN 21564:1991, ISO 1564:1976 BS EN 21564:1991, ISO 1564:1976. Specification for dental agar impression material
BS 6410:1991 BS 6410:1991. Methods of test for filter papers
BS 6779-2:1991 BS 6779-2:1991. Highway parapets for bridges and other structures. Specification for vehicle containment parapets of concrete construction
BS 6974:1991 BS 6974:1991. Specification for unsintered PTFE tape for thread sealing applications (coarse threads)
BS 7353:1991 BS 7353:1991. Methods of measuring quality of output of graphic COM recorders
BS 7379:1991 BS 7379:1991. Specification for plastics/metal laminate collapsible tubes
BS 7398:1991 BS 7398:1991. Specification for hand hacksaw frames
BS EN 27816-1:1991, ISO 7816-1:1987 BS EN 27816-1:1991, ISO 7816-1:1987. Guide to design and use of identification cards having integrated circuits with contacts. Physical characteristics
BS EN 27816-2:1991, ISO 7816-2:1988 BS EN 27816-2:1991, ISO 7816-2:1988. Guide to design and use of identification cards having integrated circuits with contacts. Contact locations and minimum size
BS 905-2:1991, EN 55020:1988 BS 905-2:1991, EN 55020:1988. Sound and television broadcast receivers and associated equipment: electromagnetic compatibility. Specification for immunity from radio inter
BS G 246:1991 BS G 246:1991. Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses
BS EN 27810:1991, ISO 7810:1985 BS EN 27810:1991, ISO 7810:1985. Guide to design, construction and use of identification cards
BS 559:1991 BS 559:1991. Specification for electric signs and high-voltage luminous-discharge-tube installations
BS 7373:1991 BS 7373:1991. Guide to the preparation of specifications
BS EN 50059:1991 BS EN 50059:1991. Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing
BS 6899:1991 BS 6899:1991. Specification for rubber insulation and sheath of electric cables
BS 1133-6.1:1991 BS 1133-6.1:1991. Packaging code. Protection of metal surfaces against corrosion during transport and storage. Cleaning and drying of metal surfaces
BS 1133-6.2:1991 BS 1133-6.2:1991. Packaging code. Protection of metal surfaces against corrosion during transport and storage. Temporary protectives and their application
BS 6221-23:1991 BS 6221-23:1991. Printed wiring boards. Guide for the design and use of printed wiring boards: surface mounted devices
BS 5724-2.1.1:1991 BS 5724-2.1.1:1991. Medical electrical equipment. Particular requirements for safety. Revised and additional text
BS 7421:1991, ISO 5350-2:1990 BS 7421:1991, ISO 5350-2:1990. Method for estimation of dirt and shives in bleached pulp
BS CECC 30700:1991 BS CECC 30700:1991. Harmonized system of quality assessment for electronic components. Sectional specification: fixed capacitors of ceramic dielectric, class 2
BS ISO 9040:1990 BS ISO 9040:1990. Information technology. Open systems interconnection. Virtual terminal basic class service
BS 3087-11:1991, ISO 9343:1988 BS 3087-11:1991, ISO 9343:1988. Pliers and nippers. Specification for dimensions and test values of slip joint pliers
BS 3087-12:1991, ISO 9242:1988 BS 3087-12:1991, ISO 9242:1988. Pliers and nippers. Specification for dimensions and test values of construction worker's pincers
BS 3087-13:1991, ISO 9243:1988 BS 3087-13:1991, ISO 9243:1988. Pliers and nippers. Specification for dimensions and test values of carpenter's pincers
BS 3087-14:1991, ISO 8976:1988 BS 3087-14:1991, ISO 8976:1988. Pliers and nippers. Specification for dimensions and test values of multiple slip joint pliers
BS 7425-1:1991, ISO 9136:1989 BS 7425-1:1991, ISO 9136:1989. Abrasive grains. Method for the determination of the bulk density of macrograins
BS ISO/IEC 9804:1990 BS ISO/IEC 9804:1990. Information technology. Open Systems Interconnection. Service definition for the commitment, concurrency and recovery service element
BS 4009:1991, IEC 60373:1990 BS 4009:1991, IEC 60373:1990. Specification for artificial mastoids for the calibration of bone vibrators used in hearing aids and audiometers
BS EN ISO 8420:1995, BS 684-2.45:1991 BS EN ISO 8420:1995, BS 684-2.45:1991. Animal and vegetable fats and oils. Determination of polar compounds content
BS 1133-10.2:1991 BS 1133-10.2:1991. Packaging code. Metal containers. Metal drums
BS 1841:Part 1:1991, ISO 730-1:1990 BS 1841:Part 1:1991, ISO 730-1:1990. Rear-mounted, three-point linkage on agricultural wheeled tractors. Specification for categories 1, 2 and 3
BS 4727-1:Group 07:1991, IEC 60050-221:1990 BS 4727-1:Group 07:1991, IEC 60050-221:1990. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to
BS 5685-8:1991 BS 5685-8:1991. Electricity meters. Specification for impulse operated multiple registers for use with induction electricity meters
BS 6207:1991 BS 6207:1991. Specification for mineral-insulated copper-sheathed cables with copper conductors
BS 6912-4:1991, ISO 10264:1990 BS 6912-4:1991, ISO 10264:1990. Safety of earth-moving machinery. Specification for key-locked starting systems
BS 7340:1991, ISO 9770:1989 BS 7340:1991, ISO 9770:1989. Schedule for compressibility factors for petroleum hydrocarbons in the density range 638 kg/m3 to 1074 kg/m3
BS EN 60420:1993, IEC 60420:1990 BS EN 60420:1993, IEC 60420:1990. Specification for high-voltage alternating current switch-fuse combinations
BS 7427:1991, ISO 5647:1990 BS 7427:1991, ISO 5647:1990. Method for determination of titanium dioxide content of paper and board
BS 7369:1991 BS 7369:1991. Specification for multi-frequency tone signalling protocol for social alarm systems
BS ISO/IEC 9805:1990 BS ISO/IEC 9805:1990. Information technology. Open systems interconnection. Protocol specification for the commitment, concurrency and recovery service element
BS 4727-2:Group 13:1991, IEC 60050-426:1990 BS 4727-2:Group 13:1991, IEC 60050-426:1990. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particula
BS 4727-2:Group 14:1991, IEC 60050-436:1990 BS 4727-2:Group 14:1991, IEC 60050-436:1990. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particula
BS 4727-2:Group 15:1991, IEC 60050-466:1990 BS 4727-2:Group 15:1991, IEC 60050-466:1990. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particula
BS 5763-14:1991, ISO 8914:1990 BS 5763-14:1991, ISO 8914:1990. Methods for microbiological examination of food and animal feeding stuffs. Detection of Vibrio parahaemolyticus
BS 6203:1991 BS 6203:1991. Guide to fire characteristics and fire performance of expanded polystyrene materials used in building applications
BS 4J 11:1991 BS 4J 11:1991. Specification for pressure-sensitive adhesive paper masking tape
BS EN ISO 542:1995 BS EN ISO 542:1995. Oilseeds. Sampling
BS 4196-1:1991, EN 23741:1991,ISO 3741:1988 BS 4196-1:1991, EN 23741:1991,ISO 3741:1988. Sound power levels of noise sources. Precision methods for determination of sound power levels for broad-band s
BS 4196-2:1991, EN 23742:1991,ISO 3742:1988 BS 4196-2:1991, EN 23742:1991,ISO 3742:1988. Sound power levels of noise sources. Precision methods for determination of sound power levels for discrete-fre
BS 4727-1:Group 09:1991, IEC 60050-161:1990 BS 4727-1:Group 09:1991, IEC 60050-161:1990. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to
BS 4727-1:Group 11:1991, IEC 60194:1988 BS 4727-1:Group 11:1991, IEC 60194:1988. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power,
BS 6712-2:1991, ISO 8226-2:1990 BS 6712-2:1991, ISO 8226-2:1990. Measurement of hygroexpansivity of paper and board. Method for measurement of hygroexpansivity up to a maximum relative humidity of 86%
BS 7228-2:1991, EN 29787:1992,ISO 9787:1990 BS 7228-2:1991, EN 29787:1992,ISO 9787:1990. Industrial robots. Guide to definitions of coordinate systems and motions
BS 7399:1991 BS 7399:1991. Method for determination of delamination force of textile floor coverings
BS 1000[65/651+657/659]:1991 BS 1000[65/651+657/659]:1991. Universal Decimal Classification. English full edition. Management and organization of industry and commerce
BS 4727-2:Group 04:1991, IEC 60050-421:1990 BS 4727-2:Group 04:1991, IEC 60050-421:1990. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particula
BS 4727-1:Group 10:1991, IEC 60050-212:1990 BS 4727-1:Group 10:1991, IEC 60050-212:1990. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to
BS ISO/IEC 9983:1989, EN 29983:1991 BS ISO/IEC 9983:1989, EN 29983:1991. Information processing systems. Designation of unrecorded flexible disk cartridges
BS 4125:1991 BS 4125:1991. Specification for safety requirements for child safety barriers for domestic use
BS 4376-1:1991 BS 4376-1:1991. Electrically operated blood storage refrigerators. Specification for closed reach-in types
BS 5597:1991 BS 5597:1991. Specification for non-refillable plastics aerosol dispensers up to 1000 mL capacity
BS 6906-5:1991 BS 6906-5:1991. Methods of test for geotextiles. Determination of creep
BS 7359:1991 BS 7359:1991. Nomenclature of commercial timbers including sources of supply
BS 7407:1991 BS 7407:1991. Specification for vehicles, directly propelled by energy derived from a fuel, capable of carrying children
BS ISO/IEC 10021-3:1990 BS ISO/IEC 10021-3:1990. Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Abstract service definition conventions
BS 6906-8:1991 BS 6906-8:1991. Methods of test for geotextiles. Determination of sand-geotextile frictional behaviour by direct shear
BS 1660-11:1991 BS 1660-11:1991. Machine tapers. Specification for gauges
BS 4863:1991 BS 4863:1991. Specification for safety requirements for playpens for domestic use
BS 4997:1991 BS 4997:1991. Specification for wooden axilla crutches
BS 7177:1991 BS 7177:1991. Specification for resistance to ignition of mattresses, divans and bed bases
BS 5173:Part 102:Section 102.1:1991 BS 5173:Part 102:Section 102.1:1991. Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Hydrostatic tests
BS 7403:Part 8:1991, ISO 4548-8:1989 BS 7403:Part 8:1991, ISO 4548-8:1989. Full-flow lubricating oil filters for internal combustion engines. Method of test for inlet anti-drain valves
BS 7412:1991 BS 7412:1991. Specification for plastics windows made from PVC-U extruded hollow profiles
BS CECC 31600:1991 BS CECC 31600:1991. Harmonized system of quality assessment for electronic components: sectional specification. Fixed capacitors with paper and paper/plastics dielectrics
BS 7413:1991 BS 7413:1991. Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type A
BS 7414:1991 BS 7414:1991. Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type B
BS ISO/IEC 9594-8:1990 BS ISO/IEC 9594-8:1990. Information technology. Open systems interconnection. Authentication framework
BS ISO/IEC 10021-1:1990 BS ISO/IEC 10021-1:1990. Information technology. Text communication. Message-oriented text interchange systems (MOTIS). System and service overview
BS ISO/IEC 10021-6:1990 BS ISO/IEC 10021-6:1990. Information technology. Message handling systems (MHS). Information technology. Text communication. Message-oriented text interchange systems (MOTIS).
BS ISO/IEC 10021-2:1990 BS ISO/IEC 10021-2:1990. Information technology. Message handling systems (MHS). Information technology. Text communication. Message-oriented text interchange systems (MOTIS).
BS ISO/IEC 10021-4:1990 BS ISO/IEC 10021-4:1990. Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Message transfer system: abstract service definition and
BS ISO/IEC 10021-7:1990 BS ISO/IEC 10021-7:1990. Information technology. Message handling systems (MHS). Information technology. Text communication. Message-oriented text interchange systems (MOTIS).
BS 3517:1991, ISO 718:1990 BS 3517:1991, ISO 718:1990. Methods for thermal shock tests on laboratory glassware
BS 4317-26:1991, ISO 4112:1990 BS 4317-26:1991, ISO 4112:1990. Methods of test for cereals and pulses. Measurement of temperature of grain during bulk storage
BS 5690:1991 BS 5690:1991. Method for determination of abrasion resistance of fabrics
BS 6413-6:1991, ISO 6743-6:1990 BS 6413-6:1991, ISO 6743-6:1990. Lubricants, industrial oils and related products (class L). Classification for family C (gears)
BS 7228:Part 4:Section 4.1:1991, EN 29283:1992,ISO 9283:1990 BS 7228:Part 4:Section 4.1:1991, EN 29283:1992,ISO 9283:1990. Industrial robots. Performance criteria and testing. Methods for comprehensiv
BS 7403-7:1991, ISO 4548-7:1990 BS 7403-7:1991, ISO 4548-7:1990. Full-flow lubricating oil filters for internal combustion engines. Method of test for vibration fatigue
BS 7409:1991 BS 7409:1991. Specification for safety requirements for wheeled child conveyances
BS 7424:1991, ISO 5628:1990 BS 7424:1991, ISO 5628:1990. Guide to general principles for determination of the bending stiffness of paper and board by static methods
BS 7432:1991, EN 29997:1992,ISO 9997:1990 BS 7432:1991, EN 29997:1992,ISO 9997:1990. Specification for dental cartridge syringes
BS CECC 90000:1991 BS CECC 90000:1991. Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
BS 2011-2.1Kc:1991 BS 2011-2.1Kc:1991. Environmental testing. Tests. Test Kc and guidance. Sulphur dioxide test for contacts and connections
BS 7370-1:1991 BS 7370-1:1991. Grounds maintenance. Recommendations for establishing and managing grounds maintenance organizations and for design considerations related to maintenance
BS 7370-3:1991 BS 7370-3:1991. Grounds maintenance. Recommendations for maintenance of amenity and functional turf (other than sports turf)
BS 7419:1991 BS 7419:1991. Specification for holding down bolts
BS 7403-5:1991, ISO 4548-5:1990 BS 7403-5:1991, ISO 4548-5:1990. Full-flow lubricating oil filters for internal combustion engines. Method of test for cold start simulation and hydraulic pulse durabil
BS 7403-6:1991, ISO 4548-6:1985 BS 7403-6:1991, ISO 4548-6:1985. Full-flow lubricating oil filters for internal combustion engines. Method of test for static burst pressure
BS 7403-13:1991, ISO 6415:1990 BS 7403-13:1991, ISO 6415:1990. Full-flow lubricating oil filters for internal combustion engines. Specification for dimensions of spin-on filters
BS 2646-4:1991 BS 2646-4:1991. Autoclaves for sterilization in laboratories. Guide to maintenance
BS 7431:1991, ISO 9808:1990 BS 7431:1991, ISO 9808:1990. Method for assessing solar water heaters. Elastomeric materials for absorbers, connecting pipes and fittings
BS ISO/IEC 9594-1:1990 BS ISO/IEC 9594-1:1990. Information technology. Open systems interconnection. Overview of concepts, models and services
BS ISO/IEC 9594-2:1990 BS ISO/IEC 9594-2:1990. Information technology. Open systems interconnection. Models
BS ISO/IEC 9594-3:1990 BS ISO/IEC 9594-3:1990. Information technology. Open systems interconnection. Abstract service definition
BS ISO/IEC 9594-4:1990 BS ISO/IEC 9594-4:1990. Information technology. Open systems interconnection. Procedures for distributed operation
BS ISO/IEC 9594-5:1990 BS ISO/IEC 9594-5:1990. Information technology. Open systems interconnection. Protocol specifications
BS ISO/IEC 9594-6:1990 BS ISO/IEC 9594-6:1990. Information technology. Open systems interconnection. Selected attribute types
BS ISO/IEC 9594-7:1990 BS ISO/IEC 9594-7:1990. Information technology. Open systems interconnection. Selected object classes
BS ISO/IEC 10021-5:1990 BS ISO/IEC 10021-5:1990. Information technology. Text communication. Message-oriented text interchange systems (MOTIS). Message store: abstract service definition
BS 6250:Part 3:1991 BS 6250:Part 3:1991. Domestic and contract furniture. Specification for performance requirements for cabinet furniture
BS 5386-4:1991 BS 5386-4:1991. Specification for gas burning appliances. Built-in domestic cooking appliances
BS 5193:1991, ISO 6745:1990 BS 5193:1991, ISO 6745:1990. Specification for zinc phosphate pigments for paints
BS 5873-2:1991 BS 5873-2:1991. Educational furniture. Specification for strength and stability of chairs for educational institutions
BS 6250:Part 2:1991 BS 6250:Part 2:1991. Domestic and contract furniture. Specification for performance requirements for tables and trolleys
BS 7111:1991, ISO 8372:1987 BS 7111:1991, ISO 8372:1987. Guide to modes of operation for a 64-bit block cipher algorithm
BS 7428:1991, ISO 2624:1990 BS 7428:1991, ISO 2624:1990. Method for estimating the average grain size of copper and copper alloys
PP 666:1991 PP 666:1991. Language of labels
BS 2782:Part 4:Method 470A:1991, ISO 3451/1:1981 BS 2782:Part 4:Method 470A:1991, ISO 3451/1:1981. Methods of testing plastics. Chemical properties. Determination of ash (general methods)
BS 3087-10:1991 BS 3087-10:1991. Pliers and nippers. Specification for dimensions of tools not standardized by ISO
BS EN 29873:1994, ISO 9873:1990 BS EN 29873:1994, ISO 9873:1990. Requirements specification for reusable metal dental mirrors and handles
BS 5512:1991, ISO 281:1990 BS 5512:1991, ISO 281:1990. Method of calculating dynamic load ratings and rating life of rolling bearings
BS 5131-1.2:1991 BS 5131-1.2:1991. Methods of test for footwear and footwear materials. Adhesives. Resistance of adhesive joints to peeling
BS 2782:Part 4:Method 470B:1991, ISO 3451/2:1984 BS 2782:Part 4:Method 470B:1991, ISO 3451/2:1984. Methods of testing plastics. Chemical properties. Determination of ash of polyalkylene terephthalates
BS 2782-4:Method 470C:1991, ISO 3451-3:1984 BS 2782-4:Method 470C:1991, ISO 3451-3:1984. Methods of testing plastics. Chemical properties. Determination of ash of unplasticized cellulose acetate
BS EN ISO 8780-1:1995 BS EN ISO 8780-1:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Introduction
BS EN ISO 8780-2:1995 BS EN ISO 8780-2:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using an oscillatory shaking machine
BS EN ISO 8780-3:1995 BS EN ISO 8780-3:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a high speed impeller mill
BS EN ISO 8780-4:1995 BS EN ISO 8780-4:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a bead mill
BS EN ISO 8780-5:1995 BS EN ISO 8780-5:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using an automatic muller
BS EN ISO 8780-6:1995 BS EN ISO 8780-6:1995. Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a triple-roll mill
BS EN ISO 8781-1:1995 BS EN ISO 8781-1:1995. Pigments and extenders. Methods of assessment of dispersion characteristics. Assessment from the charge in tinting strength of coloured pigments
BS EN ISO 8781-2:1995 BS EN ISO 8781-2:1995. Pigments and extenders. Methods of assessment of dispersion characteristics. Assessment from the change in fineness of grind
BS EN ISO 8781-3:1995 BS EN ISO 8781-3:1995. Pigments and extenders. Methods of assessment of dispersion characteristics. Assessment from the change in gloss
BS L 173:1991 BS L 173:1991. Specification for castings of aluminium-silicon-magnesium alloy, chill cast (solution treated and precipitation treated to an overaged (T7) condition)
BS L 174:1991 BS L 174:1991. Specification for castings of aluminium-silicon-magnesium alloy, sand cast (solution treated and precipitation treated to an overaged (T7) condition)
BS 6101-2:1991 BS 6101-2:1991. Machine tool ball screws. Specification for accuracy, including geometrical tests
BS EN 61041-1:1995, BS 7434-1:1991,IEC 61041-1:1990 BS EN 61041-1:1995, BS 7434-1:1991,IEC 61041-1:1990. Non-broadcast video tape recorders. Methods of measurement. General video (NTSC/PAL) and audio
BS 6840-17:1991, IEC 60268-17:1990 BS 6840-17:1991, IEC 60268-17:1990. Sound system equipment. Methods for specifying and measuring the characteristics of standard volume indicators
BS AU 238:1991, ISO 7227:1987 BS AU 238:1991, ISO 7227:1987. Glossary of terms for road vehicle lighting and light signalling devices
BS 7397:1991 BS 7397:1991. Methods of test for mattresses, bed bases and bed sets
BS ISO/IEC 8825:1990 BS ISO/IEC 8825:1990. Information technology. Open systems interconnection. Specification of basic encoding rules for abstract syntax notation one (ASN.1)
BS ISO/IEC 8571-5:1990 BS ISO/IEC 8571-5:1990. Information processing systems. Open systems interconnection. File transfer, access and management. Protocol Implementation Conformance Statement Proform
BS ISO/IEC 8824:1990 BS ISO/IEC 8824:1990. Information technology. Open systems interconnection. Specification of abstract syntax notation one (ASN.1)
BS EN 29171-1:1993 BS EN 29171-1:1993. Information technology. 130 mm optical disk cartridge, write once, for information interchange. Unrecorded optical disk cartridge
BS EN 29171-2:1993 BS EN 29171-2:1993. Information technology. 130 mm optical disk cartridge, write once, for information interchange. Recording format
BS AU 235-2:1991, ISO 8716:1988 BS AU 235-2:1991, ISO 8716:1988. Fifth wheel couplings for commercial vehicles. Method of testing strength of coupling pins
BS AU 241:1991, ISO 1726:1989 BS AU 241:1991, ISO 1726:1989. Specification for mechanical coupling between tractors and semi-trailers: interchangeability
BS 6498:1991 BS 6498:1991. Guide to preparation of microfilm and other microforms that may be required as evidence
BS AU 239:1991, ISO 8718:1988 BS AU 239:1991, ISO 8718:1988. Method of testing strength of drawbar couplings and eyes for hinged drawbars
BS ISO 8439:1990 BS ISO 8439:1990. Forms design. Basic layout
BS 2838-2:1991 BS 2838-2:1991. Examination and general treatment couches. Specification for variable height couches
BS 3908-9:1991 BS 3908-9:1991. Methods for the sampling and analysis of lead and lead alloys. Sulphur in lead and lead alloys
BS 5900:1991 BS 5900:1991. Specification for powered domestic lifts
BS 7152:1991 BS 7152:1991. Guide to choice of chemical disinfectants
BS 7411:1991 BS 7411:1991. Specification for lever operated knapsack sprayers
BS 7416:1991 BS 7416:1991. Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems
BS 7417:1991 BS 7417:1991. Specification for interface dimensions of flat face 'O'-ring seal hydraulic couplings
BS 7454:1991, IEC 60949:1988 BS 7454:1991, IEC 60949:1988. Method for calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
BS 4285-4:1991 BS 4285-4:1991. Microbiological examination for dairy purposes. Methods for assessment of hygienic conditions
BS 1016-104.1:1991 BS 1016-104.1:1991. Methods for analysis and testing of coal and coke. Proximate analysis. Determination of moisture content of the general analysis sample of coal
BS 1016-104.2:1991 BS 1016-104.2:1991. Methods for analysis and testing of coal and coke. Determination of moisture content of the general analysis sample of coke
BS 1016:Part 104:Section 104.3:1991 BS 1016:Part 104:Section 104.3:1991. Methods for analysis and testing of coal and coke. Proximate analysis. Determination of volatile matter content
BS 1016:Part 104:Section 104.4:1991 BS 1016:Part 104:Section 104.4:1991. Methods for analysis and testing of coal and coke. Proximate analysis. Determination of ash
BS 5516:1991 BS 5516:1991. Code of practice for design and installation of sloping and vertical patent glazing
BS AU 195a:1991, ISO 4009:1989 BS AU 195a:1991, ISO 4009:1989. Specification for mounting electrical connections on rear cross members of towing vehicles
BS 7112:1991, ISO 9160:1988 BS 7112:1991, ISO 9160:1988. Procedures for achievement of interoperability and security by use of encipherment at the physical layer of OSI in telecommunication systems co
BS 2G 210:1991 BS 2G 210:1991. Specification for PTFE insulated equipment wires and cables, single and multi-core, with silver plated copper conductors (190°C) or nickel plated copper conductors (260°
BS 2782-1:Method 130A:1991, ISO 182-1:1990 BS 2782-1:Method 130A:1991, ISO 182-1:1990. Methods of testing plastics. Thermal properties. Determination of the thermal stability of polyvinyl chloride by
BS 7439:1991, ISO 9688:1990 BS 7439:1991, ISO 9688:1990. Method for exchange of information for the analytical assessment of shock resistance of mechanical systems
BS 142:Part 2:Section 2.3:1991, IEC 60255-8:1990 BS 142:Part 2:Section 2.3:1991, IEC 60255-8:1990. Electrical protection relays. Requirements for the principal families of protection relays. Specifica
BS 1674:1991 BS 1674:1991. Specification for equipment and general procedure for mixing and vulcanizing rubber test mixes
BS 4377:1991 BS 4377:1991. Specification for tapping of holes to receive wire thread inserts (ISO metric threads)
BS 5241-2:1991 BS 5241-2:1991. Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site. Specification for dispensed foam for thermal insulation or buo
BS 5293-14:1991, ISO 3858-1:1990 BS 5293-14:1991, ISO 3858-1:1990. Sampling and testing carbon black for use in the rubber industry. Method for determination of light transmittance of toluene extract
BS 5293-15:1991, ISO 3858-2:1990 BS 5293-15:1991, ISO 3858-2:1990. Sampling and testing carbon black for use in the rubber industry. Method for determination of light transmittance of toluene extract
BS 5293-7:1991, ISO 1125:1990 BS 5293-7:1991, ISO 1125:1990. Sampling and testing carbon black for use in the rubber industry. Method for determination of ash content
BS 5510:1991, ISO 3965:1990 BS 5510:1991, ISO 3965:1990. Methods for determination of maximum speeds of agricultural wheeled tractors
BS 5550-7.2.6:1991, ISO 2910:1990 BS 5550-7.2.6:1991, ISO 2910:1990. Cinematography. Production and presentation. Screens and screen luminance. Specification for screen luminance and colour for the pr
BS 5672:1991, ISO 1204:1990 BS 5672:1991, ISO 1204:1990. Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left
BS 5731:1991, ISO 8935:1990 BS 5731:1991, ISO 8935:1990. Specification for mountings and apertures for external equipment controls on agricultural and forestry tractors
BS 6068-6.6:1991, ISO 5667-6:1990 BS 6068-6.6:1991, ISO 5667-6:1990. Water quality. Sampling. Guidance on sampling of rivers and streams
BS 6069-3.2:1991, ISO 8518:1990 BS 6069-3.2:1991, ISO 8518:1990. Characterization of air quality. Workplace atmospheres. Method for the determination of particulate lead and lead compounds by flame at
BS 6100-1.3.6:1991 BS 6100-1.3.6:1991. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works. Jointing products, builders' hardware and accessories
BS 3900-A5:1991 BS 3900-A5:1991. Methods of test for paints. Large-scale brushing tests for paints and varnishes
BS 5226:1991 BS 5226:1991. Code of practice for equipment and procedures for the cleaning and disinfecting of milking machine installations
BS 6686:Part 2:Section 2.5:1991, IEC 60704-2-5:1989 BS 6686:Part 2:Section 2.5:1991, IEC 60704-2-5:1989. Methods for determination of airborne acoustical noise emitted by household and similar electri
BS 7164-5:1991, ISO 247:1990 BS 7164-5:1991, ISO 247:1990. Chemical tests for raw and vulcanized rubber. Methods for determination of ash content
BS 7164-27.1:1991, ISO 6101-5:1990 BS 7164-27.1:1991, ISO 6101-5:1990. Chemical tests for raw and vulcanized rubber. Methods for determination of iron content. Atomic absorption spectrometry
BS 7425-2:1991, ISO 9137:1990 BS 7425-2:1991, ISO 9137:1990. Abrasive grains. Method for determining the capillarity
BS 7440:1991, ISO 9059:1990 BS 7440:1991, ISO 9059:1990. Method for calibrating field pyrheliometers by comparison to a reference pyrheliometer
BS 7228:Part 3:1991, EN 29946:1992,ISO 9946:1991 BS 7228:Part 3:1991, EN 29946:1992,ISO 9946:1991. Industrial robots. Specification for the presentation of characteristics by the manufacturer
BS 3202-1:1991 BS 3202-1:1991. Laboratory furniture and fittings. Introduction
BS 5925:1991 BS 5925:1991. Code of practice for ventilation principles and designing for natural ventilation
BS 3202-3:1991 BS 3202-3:1991. Laboratory furniture and fittings. Recommendations for design
BS 3202-4:1991 BS 3202-4:1991. Laboratory furniture and fittings. Recommendations for installation
BS 718:1991 BS 718:1991. Specification for density hydrometers
BS 3502-1:1991, ISO 1043-1:1987 BS 3502-1:1991, ISO 1043-1:1987. Symbols for plastics and rubber materials. Schedule for symbols for plastics
BS 3502:Part 2:1991 BS 3502:Part 2:1991. Symbols for plastics and rubber materials. Schedule for symbols for rubbers
BS 3762-0:1991 BS 3762-0:1991. Analysis of formulated detergents. General introduction
BS 6001-1:1991, ISO 2859-1:1989 BS 6001-1:1991, ISO 2859-1:1989. Sampling procedures for inspection by attributes. Specification for sampling plans indexed by acceptable quality level (AQL) for lot-by
BS EN 141:1991 BS EN 141:1991. Specification for gas filters and combined filters used in respiratory protective equipment
BS EN 60335-2-25:1991 BS EN 60335-2-25:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Microwave ovens
BS EN 2495:1991 BS EN 2495:1991. Specification for single-pole circuit breakers, temperature compensated, rated currents up to 25 A. Product standard
BS EN 2350:1991 BS EN 2350:1991. Circuit breakers. Technical specification
BS EN 60335-2-3:1991 BS EN 60335-2-3:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Electric irons
BS 6349-5:1991 BS 6349-5:1991. Maritime structures. Code of practice for dredging and land reclamation
BS 6762-2:1991 BS 6762-2:1991. Services for leisure accommodation vehicles and transportable accommodation units. Code of practice for the installation of solid fuel fired heating in park homes and tr
BS 7420:1991 BS 7420:1991. Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions)
BS EN 27493:1991, ISO 7493:1985 BS EN 27493:1991, ISO 7493:1985. Specification for dental operator's stool
BS 1425-2:1991 BS 1425-2:1991. Cleanliness of fillings and stuffings for bedding, upholstery and other domestic articles. Specification for feather and/or down fillings and stuffings
BS 3087-1:1991 BS 3087-1:1991. Pliers and nippers. General introduction
BS 5537:1991 BS 5537:1991. Guide to forms design sheet and layout chart
BS 7335-1:1991 BS 7335-1:1991. Installation of monolithic refractories. Code of practice for installation by casting
BS 7438:1991 BS 7438:1991. Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type
BS 2782:Part 3:Method 365D:1991 BS 2782:Part 3:Method 365D:1991. Methods of testing plastics. Mechanical properties. Determination of hardness by the ball indentation method
BS 6100-1.3.0:1991 BS 6100-1.3.0:1991. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works. External works
BS 6230:1991 BS 6230:1991. Specification for installation of gas-fired forced convection air heaters for commercial and industrial space heating (2nd family gases)
BS EN 29318-2:1995 BS EN 29318-2:1995. Information technology. Intelligent Peripheral Interface. Device specific command set for magnetic disk drives
BS 6014:1991 BS 6014:1991. Specification for ethylene propylene rubber compounds
BS EN 2592:1991 BS EN 2592:1991. Specification for three-pole circuit breakers, temperature compensated, rated currents up to 25 A. Product standard
BS 5845:1991 BS 5845:1991. Specification for permanent anchors for industrial safety belts and harnesses
BS 5154:1991 BS 5154:1991. Specification for copper alloy globe, globe stop and check, check and gate valves
BS 4443-6:1991 BS 4443-6:1991. Methods of test for flexible cellular materials. Method 14. Preparation of water extract. Method 15. Determination of tear strength. Method 16. Determination of air flow
PP 7310:1990 PP 7310:1990. Anthropometrics: an introduction
BS EN 60926:1991 BS EN 60926:1991. Specification for general and safety requirements for starting devices (other than glow starters)
BS 3F 65:1991 BS 3F 65:1991. Specification for flexible corrugated oxygen and air tubes for aircraft (natural or synthetic polyisoprene)
BS 3G 100-2.3.12:1991 BS 3G 100-2.3.12:1991. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Fluid contamination
BS 7433-2:1991 BS 7433-2:1991. Cross recessed machine screws. Specification for countersunk flat head screws product grade A and property class 4.8 only
BS 6833-5:1991 BS 6833-5:1991. Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Specification for
BS 903:Part A46:1991, ISO 6179:1989 BS 903:Part A46:1991, ISO 6179:1989. Physical testing of rubber. Method for determination of the transmission rate of volatile liquids
BS 2M 54:1991 BS 2M 54:1991. Specification for temperature control in the heat treatment of metals
BS 3749:1991 BS 3749:1991. Specification for E glass fibre woven roving fabrics for the reinforcement of polyester and epoxy resins systems
BS 6068-2.40:1991, ISO 9390:1990 BS 6068-2.40:1991, ISO 9390:1990. Water quality. Physical, chemical and biochemical methods. Method for the determination of borate by spectrometry using azomethine-H
DD 193:1991 DD 193:1991. Method for recovery of bitumen binders by dichloromethane extraction (rotary film evaporator method)
BS 1247-3:1991 BS 1247-3:1991. Manhole steps. Specification for aluminium manhole steps
BS 6726:1991 BS 6726:1991. Specification for festoon and temporary lighting cables and cords
BS EN 60427:1992, IEC 60427:1989 BS EN 60427:1992, IEC 60427:1989. Specification for synthetic testing of high-voltage alternating current circuit-breakers
BS ISO/IEC 8880-1:1990 BS ISO/IEC 8880-1:1990. Information technology. Telecommunications and information exchange between systems. Protocol combinations to provide and support the OSI network service
BS ISO/IEC 8880-3:1990 BS ISO/IEC 8880-3:1990. Information technology. Telecommunications and information exchange between systems. Protocol combinations to provide and support the OSI network service
BS 1133-15:1991 BS 1133-15:1991. Packaging code. Tensional strapping
BS 5873:Part 4:1991 BS 5873:Part 4:1991. Educational furniture. Specification for strength and stability of storage furniture for educational institutions
BS 6221-2:1991, IEC 60326-2:1990 BS 6221-2:1991, IEC 60326-2:1990. Printed wiring boards. Methods of test
BS 1425-1:1991 BS 1425-1:1991. Cleanliness of fillings and stuffings for bedding, upholstery and other domestic articles. Specification for fillings and stuffings other than feather and/or down
BS 6102-11:1991, ISO 6699:1990 BS 6102-11:1991, ISO 6699:1990. Cycles. Specification for assembly dimensions for stem and handlebar bend
BS 6102-13:1991, ISO 10230:1990 BS 6102-13:1991, ISO 10230:1990. Cycles. Specification for mating dimensions for splined hub and sprocket
BS 7433-3:1991 BS 7433-3:1991. Cross recessed machine screws. Specification for raised countersunk head screws product grade A
BS 6913-7:1991, ISO 8927:1991 BS 6913-7:1991, ISO 8927:1991. Operation and maintenance of earth-moving machinery. Glossary for machine availability
BS 4269-2:1991, EN 21563:1991,ISO 1563:1990 BS 4269-2:1991, EN 21563:1991,ISO 1563:1990. Dental elastic impression material. Specification for alginate impression material
BS 6102-12:1991, ISO 8562:1990 BS 6102-12:1991, ISO 8562:1990. Cycles. Specification for stem wedge angle
BS 7269-1:1991 BS 7269-1:1991. Drycleanability of leather garments. Specification for drycleanability and for appropriate care labels
BS 7269-2:1991 BS 7269-2:1991. Drycleanability of leather garments. Method for assessing drycleanability
BS 7433-1:1991 BS 7433-1:1991. Cross recessed machine screws. Specification for pan head screws of product grade A
BS 7442-1:1991, ISO/TR 8517:1988 BS 7442-1:1991, ISO/TR 8517:1988. Rubber or plastics covered rollers. Glossary of terms
BS 4371:1991 BS 4371:1991. Specification for fibrous gland packings
BS 5722:1991 BS 5722:1991. Specification for flammability performance of fabrics and fabric combinations used in nightwear garments
BS 6100-1.5.5:1991 BS 6100-1.5.5:1991. Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipment. Plant and equipment
BS 7446:1991, ISO 3711:1990 BS 7446:1991, ISO 3711:1990. Specification for lead chromate pigments and lead chromate-molybdate pigments for paints
BS 3189:1991, ISO 9717:1990 BS 3189:1991, ISO 9717:1990. Method for specifying phosphate conversion coatings for metals
BS 5216:1991 BS 5216:1991. Specification for patented cold drawn steel wire for mechanical springs
BS 5724:Part 2:Section 2.119:1991, IEC 60601-2-19:1990 BS 5724:Part 2:Section 2.119:1991, IEC 60601-2-19:1990. Medical electrical equipment. Particular requirements for safety. Specification for baby
BS EN 132:1991 BS EN 132:1991. Respiratory protective devices. Definitions
BS EN 133:1991 BS EN 133:1991. Respiratory protective devices. Classification
BS EN 134:1991 BS EN 134:1991. Respiratory protective devices. Nomenclature of components
BS EN 135:1991 BS EN 135:1991. Respiratory protective devices. List of equivalent terms
BS EN 60335-2-12:1991 BS EN 60335-2-12:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Warming plates and similar appliances
BS 1133-18:1991 BS 1133-18:1991. Packaging code. Packaging in glass
BS B 28:1991 BS B 28:1991. Specification for copper-beryllium alloy strip, foil and parts (solution treated (W) and precipitated)
BS B 29:1991 BS B 29:1991. Specification for copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: quarter hard (W(1/4H)) and precipitated)
BS B 30:1991 BS B 30:1991. Specification for copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: half hard (W(1/2H)) and precipitated)
BS B 31:1991 BS B 31:1991. Specification for copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: full hard (W(H)) and precipitated)
BS B 32:1991 BS B 32:1991. Specification for copper-beryllium alloy rods, sections and parts (solution treated (W) and precipitated)
BS B 33:1991 BS B 33:1991. Specification for copper-beryllium alloy wire and springs (solution treated (W) and precipitated)
BS F 140:1991 BS F 140:1991. Glossary of parachute terms
BS 5411-8:1991, ISO 3497:1990 BS 5411-8:1991, ISO 3497:1990. Methods of test for metallic and related coatings. Measurement of coating thickness of metallic coatings: X-ray spectrometric methods
BS 303:1991, ISO 3710:1990 BS 303:1991, ISO 3710:1990. Specification for lead chrome green pigments for paints
BS EN 60249-2-15:1994, IEC 60249-2-15:1987 BS EN 60249-2-15:1994, IEC 60249-2-15:1987. Specifications. Flexible copper-clad polyimide film, of defined flammability
BS 5724:Part 2:Section 2.120:1991, IEC 60601-2-20:1990 BS 5724:Part 2:Section 2.120:1991, IEC 60601-2-20:1990. Medical electrical equipment. Particular requirements for safety. Specification for trans
BS 7141-7:1991 BS 7141-7:1991. Narrow fabrics. Specification for woven cotton tapes and webbings
BS 7450:1991, IEC 61059:1991 BS 7450:1991, IEC 61059:1991. Method for determination of economic optimization of power cable size
BS 6388-1:1991, ISO 5630-1:1991 BS 6388-1:1991, ISO 5630-1:1991. Accelerated ageing of paper and board. Method for dry heat treatment at 105°C
BS 7418:1991 BS 7418:1991. Code of practice for isolation of the welding circuit in arc welding plant
BS X 32:1991 BS X 32:1991. Specification for pretreatment primer for aerospace purposes
BS X 33:1991 BS X 33:1991. Specification for two component epoxy primer for aerospace purposes
BS AU 50-1.6.3:1991, ISO 6054-1:1990 BS AU 50-1.6.3:1991, ISO 6054-1:1990. Tyres and wheels. Tyres. Motorcycle tyres. Specification for designations, dimensions and load ratings for code designated se
BS EN 60335-2-26:1991 BS EN 60335-2-26:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Clocks
BS ISO/IEC TR 10037:1991 BS ISO/IEC TR 10037:1991. Information technology. SGML and Text-entry Systems. Guidelines for SGML Syntax-Directed Editing Systems
BS ISO/IEC 8802-4:1990 BS ISO/IEC 8802-4:1990. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Token-p
BS ISO/IEC 10030:1990 BS ISO/IEC 10030:1990. Information technology. Telecommunications and information exchange between systems. End System Routeing Information Exchange Protocol for use in conjuncti
BS EN 29318-3:1994 BS EN 29318-3:1994. Information technology. Intelligent Peripheral Interface. Device generic command set for magnetic and optical disk drives
BS 1835:1991 BS 1835:1991. Specification for 2-ethylhexan-1-ol for industrial use
BS 6896:1991 BS 6896:1991. Specification for installation of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)
BS 3546-4:1991 BS 3546-4:1991. Coated fabrics for use in the manufacture of water penetration resistant clothing. Specification for water vapour permeable coated fabrics
BS EN 2070-3:1991 BS EN 2070-3:1991. Specification for aluminium and aluminium alloy wrought products. Technical specification. Bar and section
BS 4583:1991 BS 4583:1991. Methods of test for higher alcohols for industrial use
BS 7423:1991 BS 7423:1991. Specification for safety requirements for children's travel cots of internal base length not less than 900 mm
BS 5F 100:1991 BS 5F 100:1991. Procedure for inspection and testing of textiles for aerospace purposes
BS EN 29070:1993, ISO/IEC 9070:1991 BS EN 29070:1993, ISO/IEC 9070:1991. Information technology. SGML support facilities. Registration procedures for public text owner identifiers
BS 2056:1991 BS 2056:1991. Specification for stainless steel wire for mechanical springs
BS 6100-2.6:1991 BS 6100-2.6:1991. Glossary of building and civil engineering terms. Civil engineering. Natural waters. Inland. Coastal. Marine
BS 6883:1991 BS 6883:1991. Specification for elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units
BS 2782:Part 7:Method 732A:1991, ISO 1628-1:1984 BS 2782:Part 7:Method 732A:1991, ISO 1628-1:1984. Methods of testing plastics. Rheological properties. Determination of viscosity number:general condit
BS 2782-7:Method 732B:1991, ISO 1628-2:1988 BS 2782-7:Method 732B:1991, ISO 1628-2:1988. Methods of testing plastics. Rheological properties. Determination of viscosity number of poly(vinyl chloride)
BS 2782:Part 7:Method 732E:1991, ISO 1628-5:1986 BS 2782:Part 7:Method 732E:1991, ISO 1628-5:1986. Methods of testing plastics. Rheological properties. Determination of viscosity number of poly(alkyle
BS 5502-51:1991 BS 5502-51:1991. Buildings and structures for agriculture. Code of practice for design and construction of slatted, perforated and mesh floors for livestock
BS 6200-1:1991 BS 6200-1:1991. Sampling and analysis of iron, steel and other ferrous metals. Introduction and contents
BS 6200-3.0:1991 BS 6200-3.0:1991. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Summary of methods
BS 7404-1.2:1991, IEC 60870-1-2:1989 BS 7404-1.2:1991, IEC 60870-1-2:1989. Telecontrol equipment and systems. General considerations. Guide for specifications
BS EN 26848:1991, ISO 6848:1984 BS EN 26848:1991, ISO 6848:1984. Specification for tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding
BS 2782-7:Method 732F:1991, ISO 1628-6:1990 BS 2782-7:Method 732F:1991, ISO 1628-6:1990. Methods of testing plastics. Rheological properties. Determination of viscosity number of methyl methacrylate p
BS 7444:1991 BS 7444:1991. Specification for molecular sieves (of type 4A)
DD ENV 41005:1991 DD ENV 41005:1991. Method for the specification of basic and supplementary services of private telecommunication networks
DD ENV 41006:1991 DD ENV 41006:1991. Scenarios for interconnections between exchanges of private telecommunication networks
BS 2782:Part 7:Method 732D:1991, ISO 1628-4:1986 BS 2782:Part 7:Method 732D:1991, ISO 1628-4:1986. Methods of testing plastics. Rheological properties. Determination of viscosity number of polycarbona
BS 3212:1991 BS 3212:1991. Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations
BS 7126:Part 101:1991 BS 7126:Part 101:1991. Urine collection bags. Specification for body-worn and non-body-worn bags
BS 7361-1:1991 BS 7361-1:1991. Cathodic protection. Code of practice for land and marine applications
BS EN 2586:1991 BS EN 2586:1991. Specification for washers, lock for flight control rods. Dimensions
BS F 138:1991 BS F 138:1991. Specification for polyester plain (bobbin) netting suitable for aerospace purposes
BS 6231:1990 BS 6231:1990. Specification for PVC-insulated cables for switchgear and controlgear wiring
BS 2769:Part 2:Section 2.5:1991 BS 2769:Part 2:Section 2.5:1991. Hand-held electric motor-operated tools. Particular requirements. Specification for circular saws and circular knives
BS 3531-23.1:1991, ISO 9585:1990 BS 3531-23.1:1991, ISO 9585:1990. Implants for osteosynthesis. Bone plates. Method for determination of bending strength and stiffness
BS 5474:1991, ISO 2303:1990 BS 5474:1991, ISO 2303:1990. Method for evaluation of non-oil-extended solution-polymerized isoprene rubber (IR)
BS 6283-1:1991 BS 6283-1:1991. Safety and control devices for use in hot water systems. Specification for expansion valves for pressures up to and including 10 bar
BS 6283-2:1991 BS 6283-2:1991. Safety and control devices for use in hot water systems. Specifications for temperature relief valves for pressures from 1 bar to 10 bar
BS 6283-3:1991 BS 6283-3:1991. Safety and control devices for use in hot water systems. Specification for combined temperature and pressure relief valves for pressures from 1 bar to 10 bar
BS 6283-4:1991 BS 6283-4:1991. Safety and control devices for use in hot water systems. Specification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for supply press
BS 7443:1991 BS 7443:1991. Specification for sound systems for emergency purposes
BS 7455-1:1991, ISO 7530-1:1990 BS 7455-1:1991, ISO 7530-1:1990. Analysis of nickel alloys by flame atomic absorption spectrometry. General requirements and sample dissolution
BS 7455-2:1991, ISO 7530-2:1990 BS 7455-2:1991, ISO 7530-2:1990. Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of cobalt
BS 7455-3:1991, ISO 7530-3:1990 BS 7455-3:1991, ISO 7530-3:1990. Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of chromium
BS 7455-4:1991, ISO 7530-4:1990 BS 7455-4:1991, ISO 7530-4:1990. Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of copper
BS 7455-5:1991, ISO 7530-5:1990 BS 7455-5:1991, ISO 7530-5:1990. Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of iron
BS 7455-6:1991, ISO 7530-6:1990 BS 7455-6:1991, ISO 7530-6:1990. Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of manganese
BS 7458-1:1991, EN 21680-1:1991,ISO 1680-1:1986 BS 7458-1:1991, EN 21680-1:1991,ISO 1680-1:1986. Test code for the measurement of airborne noise emitted by rotating electrical machinery. Engineering m
BS 7458-2:1991, EN 21680-2:1991,ISO 1680-2:1986 BS 7458-2:1991, EN 21680-2:1991,ISO 1680-2:1986. Test code for the measurement of airborne noise emitted by rotating electrical machinery. Survey method
BS 8213-1:1991 BS 8213-1:1991. Windows, doors and rooflights. Code of practice for safety in use and during cleaning of windows and doors (including guidance on cleaning materials and methods)
BS EN 60335-2-28:1991 BS EN 60335-2-28:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Sewing machines
BS 1742-4:1991 BS 1742-4:1991. Methods for chemical analysis of condensed milks. Determination of ash from condensed milks
BS 1742-5.2:1991 BS 1742-5.2:1991. Methods for chemical analysis of condensed milks. Determination of nitrogen content. Routine method
BS 4317-4:1991, ISO 605:1991 BS 4317-4:1991, ISO 605:1991. Methods of test for cereals and pulses. Determination of impurities, size, foreign odours, insects, and species and variety in pulses
BS 7445-1:1991, ISO 1996-1:1982 BS 7445-1:1991, ISO 1996-1:1982. Description and measurement of environmental noise. Guide to quantities and procedures
BS EN ISO 2789:1995 BS EN ISO 2789:1995. Information and documentation. International library statistics
BS 7463-1:1991, ISO 9184-1:1990 BS 7463-1:1991, ISO 9184-1:1990. Fibre furnish analysis of paper, board and pulps. General method
BS 7463-2:1991, ISO 9184-2:1990 BS 7463-2:1991, ISO 9184-2:1990. Fibre furnish analysis of paper, board and pulps. Guide to staining
BS 7463-3:1991, ISO 9184-3:1990 BS 7463-3:1991, ISO 9184-3:1990. Fibre furnish analysis of paper, board and pulps. Method of test by Herzberg stain
BS 7463-4:1991, ISO 9184-4:1990 BS 7463-4:1991, ISO 9184-4:1990. Fibre furnish analysis of paper, board and pulps. Method of test by Graff 'C' stain
BS 7463-5:1991, ISO 9184-5:1990 BS 7463-5:1991, ISO 9184-5:1990. Fibre furnish analysis of paper, board and pulps. Method of test by Lofton-Merritt stain (Wisbar modification)
BS EN 29316:1991, ISO 9316:1989 BS EN 29316:1991, ISO 9316:1989. Information processing systems. Small Computer System Interface (SCSI)
BS EN 60335-2-13:1991 BS EN 60335-2-13:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Frying pans, deep fat fryers and similar appliances
BS 5763-1:1991, ISO 4833:1991 BS 5763-1:1991, ISO 4833:1991. Methods for microbiological examination of food and animal feeding stuffs. Enumeration of micro-organisms. Colony count technique at 30°C
BS 5763-2:1991, ISO 4832:1991 BS 5763-2:1991, ISO 4832:1991. Methods for microbiological examination of food and animal feeding stuffs. Enumeration of coliforms. Colony count technique
BS 7445-2:1991, ISO 1996-2:1987 BS 7445-2:1991, ISO 1996-2:1987. Description and measurement of environmental noise. Guide to the acquisition of data pertinent to land use
BS 7445-3:1991, ISO 1996-3:1987 BS 7445-3:1991, ISO 1996-3:1987. Description and measurement of environmental noise. Guide to application to noise limits
DD 186:1991 DD 186:1991. Method for determination of threshold stress intensity factors and fatigue crack growth rates in metallic materials
BS 5268:Part 2:1991 BS 5268:Part 2:1991. Structural use of timber. Code of practice for permissible stress design, materials and workmanship
BS 5763-3:1991, ISO 4831:1991 BS 5763-3:1991, ISO 4831:1991. Methods for microbiological examination of food and animal feeding stuffs. Enumeration of coliforms. Most probable number technique
BS EN 2374:1991 BS EN 2374:1991. Specification for glass fibre reinforcing mouldings and sandwich composites. Production of test panels
BS 1742-5.1:1991 BS 1742-5.1:1991. Methods for chemical analysis of condensed milks. Determination of nitrogen content. Reference method
BS 7435-1:1991 BS 7435-1:1991. Fibre cement flue pipes, fittings and terminals. Specification for light quality fibre cement flue pipes, fittings and terminals
BS 7435-2:1991 BS 7435-2:1991. Fibre cement flue pipes, fittings and terminals. Specification for heavy quality fibre cement flue pipes, fittings and terminals
BS 7452:1991, IEC 60989:1991 BS 7452:1991, IEC 60989:1991. Specification for separating transformers, autotransformers, variable transformers and reactors
BS EN 2070-1:1991 BS EN 2070-1:1991. Specification for aluminium and aluminium alloy wrought products. Technical specification. General requirements
BS EN 2070-2:1991 BS EN 2070-2:1991. Specification for aluminium and aluminium alloy wrought products. Technical specification. Sheet, strip formed profiles and plate
BS EN 2243-2:1991 BS EN 2243-2:1991. Structural adhesives. Test methods. Peel metal-metal
BS ISO/IEC 9595:1991 BS ISO/IEC 9595:1991. Information technology. Open Systems Interconnection. Common management information service definition
BS 5766-14:1991, ISO 6654:1991 BS 5766-14:1991, ISO 6654:1991. Methods for analysis of animal feeding stuffs. Determination of urea content
DD 198:1991 DD 198:1991. Guide to assessment of reliability of systems containing software
BS 8216:1991 BS 8216:1991. Code of practice for use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings
BS 3473-1:1991, ISO 695:1991 BS 3473-1:1991, ISO 695:1991. Chemical resistance of glass used in the production of laboratory glassware. Method for determination of resistance of glass to attack by a b
BS 3482-1:1991 BS 3482-1:1991. Methods of test for desiccants. Sampling, and preparation and storage of test samples
BS 3482-2:1991 BS 3482-2:1991. Methods of test for desiccants. Determination of moisture content
BS 3482-3:1991 BS 3482-3:1991. Methods of test for desiccants. Determination of pH
BS 3482-4:1991 BS 3482-4:1991. Methods of test for desiccants. Determination of water-soluble chlorides content
BS 3482-5:1991 BS 3482-5:1991. Methods of test for desiccants. Determination of water-soluble sulphates content
BS 3482-7:1991 BS 3482-7:1991. Methods of test for desiccants. Determination of particle size
BS 3482-8:1991 BS 3482-8:1991. Methods of test for desiccants. Estimation of ammonia and ammonium compounds content
BS 3482-9:1991 BS 3482-9:1991. Methods of test for desiccants. Determination of cobalt chloride content
BS 3482-10:1991 BS 3482-10:1991. Methods of test for desiccants. Determination of bulk density (dry basis)
BS 3482-11:1991 BS 3482-11:1991. Methods of test for desiccants. Determination of friability and dust content
BS 5131-1.7:1991 BS 5131-1.7:1991. Methods of test for footwear and footwear materials. Adhesives. Preparation of test assemblies using hot melt adhesives for heat resistance (creep) and peel tests
BS EN 60922:1991 BS EN 60922:1991. Specification for general and safety requirements for ballasts for discharge lamps (excluding tubular fluorescent lamps)
BS EN 60335-2-45:1991 BS EN 60335-2-45:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Portable electric heating tools and similar appliances
BS ISO/IEC 8441-1:1991 BS ISO/IEC 8441-1:1991. Information technology. High density digital recording (HDDR). Unrecorded magnetic tape for (HDDR) applications
BS EN 60335-2-15:1991 BS EN 60335-2-15:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Appliances for heating liquids
BS ISO/IEC TR 10176:1991 BS ISO/IEC TR 10176:1991. Information technology. Guidelines for the preparation of programming language standards
BS 3482-6:1991 BS 3482-6:1991. Methods of test for desiccants. Determination of adsorptive capacity
BS 1133-21:1991 BS 1133-21:1991. Packaging code. Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials
BS 4409-1:1991 BS 4409-1:1991. Screw conveyors. Specification for fixed trough type
BS EN 26802:1993, ISO 6802:1991 BS EN 26802:1993, ISO 6802:1991. Rubber and plastics hoses and hose assemblies. Wire reinforced. Hydraulic impulse test with flexing
BS EN 27326:1993, ISO 7326:1991 BS EN 27326:1993, ISO 7326:1991. Rubber and plastics hoses. Assessment of ozone resistance under static conditions
BS 9734:1978 BS 9734:1978. Sectional specification for pulse transformers of assessed quality for use in electronic equipment: full assessment level
BS 6992:Part 2:1991 BS 6992:Part 2:1991. Capacities and related cross sections of open-top cans for food and drinks. Recommendations for cans for meat and meat products for human consumption
BS EN 2243-4:1991 BS EN 2243-4:1991. Structural adhesives. Test methods. Metal-honeycomb core flatwise tensile test
BS EN 60127-3:1991 BS EN 60127-3:1991. Miniature fuses. Specification for sub-miniature fuse-links
BS EN 60335-2-51:1991 BS EN 60335-2-51:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Stationary circulation pumps for heating and service wate
BS EN 60923:1991 BS EN 60923:1991. Specification for performance requirements for ballasts for discharge lamps (excluding tubular fluorescent lamps)
BS EN 60924:1991 BS EN 60924:1991. Specification for general and safety requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps
BS 7465:1991, ISO 6345:1990 BS 7465:1991, ISO 6345:1990. Glossary of terms for ships windows and side scuttles
BS 7466:1991, ISO 8385:1990 BS 7466:1991, ISO 8385:1990. Specification for dredgers
DD ENV 41511:1991 DD ENV 41511:1991. Information systems interconnection. Office document architecture (ODA). Document application profile. Layout independent documents. Simple messaging profile
BS 7467:1991, ISO 7463:1990 BS 7467:1991, ISO 7463:1990. Specification for symbols for computer applications in ship building and marine technology
BS 1016-107.1:1991 BS 1016-107.1:1991. Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Determination of crucible swelling number
BS 1016-107.2:1991 BS 1016-107.2:1991. Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Assessment of caking power by Gray-King coke test
BS 1016:Part 108:Section 108.3:1991 BS 1016:Part 108:Section 108.3:1991. Methods for analysis and testing of coal and coke. Tests special to coke. Determination of bulk density (small container)
BS 1016:Part 108:Section 108.4:1991 BS 1016:Part 108:Section 108.4:1991. Methods for analysis and testing of coal and coke. Tests special to coke. Determination of bulk density (large container)
BS 5866-2:1991 BS 5866-2:1991. Blankets suitable for use in the public sector. Specification for cotton leno cellular blankets
BS 5866-3:1991 BS 5866-3:1991. Blankets suitable for use in the public sector. Specification for synthetic fibre cellular blankets
BS 5866-4:1991 BS 5866-4:1991. Blankets suitable for use in the public sector. Specification for flammability performance
BS 7402:1991 BS 7402:1991. Guide to specifying electronic typographic markup (SETM)
BS 1981:1991 BS 1981:1991. Specification for unified machine screws and machine screw nuts
BS 5551-2.8:1991, ISO 8358:1991 BS 5551-2.8:1991, ISO 8358:1991. Fertilizers. Sampling. Methods for preparation of samples of solid fertilizer for chemical and physical analysis
BS 4C 14:1991, ISO 45:1990 BS 4C 14:1991, ISO 45:1990. Specification for aircraft pressure refuelling connectors
BS 4301:1991 BS 4301:1991. Recommendations for preparation of drawings for optical elements and systems
BS 6069-4.2:1991 BS 6069-4.2:1991. Characterization of air quality. Stationary source emissions. Method for the determination of asbestos plant emissions by fibre count measurement
BS EN 60335-2-9:1991 BS EN 60335-2-9:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Toasters, grills, roasters and similar appliances
DD ENV 41208-1:1991 DD ENV 41208-1:1991. Information Systems Interconnection. Basic class virtual terminal. S-mode forms. Virtual terminal service
DD ENV 41208-2:1991 DD ENV 41208-2:1991. Information Systems Interconnection. Basic class virtual terminal. S-mode forms. Check list
DD ENV 41208-3:1991 DD ENV 41208-3:1991. Information Systems Interconnection. Basic class virtual terminal. S-mode forms. Underlying layers check list
DD ENV 41209:1991 DD ENV 41209:1991. Information systems interconnection. Basic class virtual terminal. Common control objects
BS 2782-4:Method 432A:1991, ISO 4901:1985 BS 2782-4:Method 432A:1991, ISO 4901:1985. Methods of testing plastics. Chemical properties. Determination of residual styrene monomer content in reinforced p
BS 7469-1:1991, ISO 5797-1:1989 BS 7469-1:1991, ISO 5797-1:1989. Specification for windows and side scuttles for fire-resistant constructions. B class divisions
BS 7472:1991, ISO 9382:1990 BS 7472:1991, ISO 9382:1990. Classification for shipborne barges of all series
BS 7405:1991 BS 7405:1991. Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits
BS 7451:1991 BS 7451:1991. Specification for archival quality bookbinding leather
BS 7464:1991, ISO 9089:1989 BS 7464:1991, ISO 9089:1989. Specification for anchor winches for mobile offshore units
BS EN 29519:1994, ISO 9519:1990 BS EN 29519:1994, ISO 9519:1990. Shipbuilding and marine structures. Rungs for dog-step ladders
BS EN 28970:1991, ISO 8970:1989 BS EN 28970:1991, ISO 8970:1989. Timber structures. Testing of joints made with mechanical fasteners. Requirements for wood density
BS EN 26891:1991, ISO 6891:1983 BS EN 26891:1991, ISO 6891:1983. Timber structures. Joints made with mechanical fasteners. General principles for the determination of strength and deformation characte
BS ISO/IEC 9596-1:1991 BS ISO/IEC 9596-1:1991. Information technology. Open systems interconnection. Common management information protocol. Specification
BS EN 2792:1991 BS EN 2792:1991. Rod ends, adjustable, double fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads
BS EN 60335-2-29:1991 BS EN 60335-2-29:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Battery chargers
BS EN 60921:1991 BS EN 60921:1991. Specification for ballasts for tubular fluorescent lamps. Performance requirements
BS EN 60928:1991 BS EN 60928:1991. Specification for a.c. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
BS 4409-2:1991 BS 4409-2:1991. Screw conveyors. Specification for portable and mobile type (augers)
BS 3247:1991 BS 3247:1991. Specification for salt for spreading on highways for winter maintenance
BS 7459:Part 1:1991, ISO 7749-1:1986 BS 7459:Part 1:1991, ISO 7749-1:1986. Rotating sprinklers for irrigation equipment. Specification for design and operational requirements
BS 7459-2:1991, ISO 7749-2:1990 BS 7459-2:1991, ISO 7749-2:1990. Rotating sprinklers for irrigation equipment. Methods of test for uniformity of distribution
BS 7473:1991, ISO 8384:1991 BS 7473:1991, ISO 8384:1991. Glossary of terms for dredgers
BS EN ISO 9875:1995, ISO 9875:1991 BS EN ISO 9875:1995, ISO 9875:1991. Specification for marine echo-sounding equipment
BS 3712-1:1991 BS 3712-1:1991. Building and construction sealants. Methods of test for homogeneity, relative density and penetration
BS 3712-4:1991 BS 3712-4:1991. Building and construction sealants. Method of test for adhesion in peel
BS 3939:Part 12:1991, IEC 60617-12:1991 BS 3939:Part 12:1991, IEC 60617-12:1991. Graphical symbols for electrical power, telecommunications and electronics diagrams. Guide for binary logic elements
BS 7470:1991, ISO 3904:1990 BS 7470:1991, ISO 3904:1990. Specification for clear-view screens for use in ships
BS 7471:1991, ISO 3730:1988 BS 7471:1991, ISO 3730:1988. Specification for mooring winches
BS EN 286-1:1991 BS EN 286-1:1991. Simple unfired pressure vessels designed to contain air or nitrogen. Design, manufacture and testing
BS EN 26927:1991, ISO 6927:1981 BS EN 26927:1991, ISO 6927:1981. Building construction. Jointing products. Sealants. Vocabulary
BS EN 27389:1991, ISO 7389:1987 BS EN 27389:1991, ISO 7389:1987. Building construction. Jointing products. Determination of elastic recovery
BS EN 27390:1991, ISO 7390:1987 BS EN 27390:1991, ISO 7390:1987. Building construction. Jointing products. Determination of resistance to flow
BS EN 28339:1991, ISO 8339:1984 BS EN 28339:1991, ISO 8339:1984. Building construction. Jointing products. Sealants. Determination of tensile properties
BS EN 28340:1991, ISO 8340:1984 BS EN 28340:1991, ISO 8340:1984. Building construction. Jointing products. Sealants. Determination of tensile properties at maintained extension
BS EN 28394:1991, ISO 8394:1988 BS EN 28394:1991, ISO 8394:1988. Building construction. Jointing products. Determination of extrudability of one-component sealants
BS EN 29046:1991, ISO 9046:1987 BS EN 29046:1991, ISO 9046:1987. Building construction. Sealants. Determination of adhesion/cohesion properties at constant temperature
BS EN 29048:1991, ISO 9048:1987 BS EN 29048:1991, ISO 9048:1987. Building construction. Jointing products. Determination of extrudability of sealants using standardized apparatus
BS EN 60127-5:1991 BS EN 60127-5:1991. Miniature fuses. Guide for the quality assessment of miniature fuse-links
BS AU 50-1.3.1a:1991, ISO 4250-1:1988 BS AU 50-1.3.1a:1991, ISO 4250-1:1988. Specification for tyres and wheels. Tyres. Off-the-road tyres. Specification for narrow and wide base tyre designations and
PD 6493:1991 PD 6493:1991. Guidance on methods for assessing the acceptability of flaws in fusion welded structures
DD ENV 41510:1991 DD ENV 41510:1991. Information systems interconnections. Office document architecture (ODA). Document application profile. Processable and formatted documents. Extended mixed mode
BS 476-12:1991 BS 476-12:1991. Fire tests on building materials and structures. Method of test for ignitability of products by direct flame impingement
BS 1902-5.5:1991 BS 1902-5.5:1991. Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal conductivity (panel/calorimeter method) (method 1902-505)
BS 2880:1991 BS 2880:1991. Methods of testing cellulose acetate flake
BS 6043-4.1:1991 BS 6043-4.1:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Methods of sampling
BS 6043-4.4:1991 BS 6043-4.4:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of volatile matter content of unbaked paste
BS 6043-4.5:1991 BS 6043-4.5:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of water content of unbaked pastes
BS 6043-4.6:1991 BS 6043-4.6:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of maximum rammed apparent density of unbak
BS 6043-4.8:1991 BS 6043-4.8:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of electrical resistivity of baked rammed p
BS 6043-4.13:1991 BS 6043-4.13:1991. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of ash of baked rammed paste
BS 7375:1991 BS 7375:1991. Code of practice for distribution of electricity on construction and building sites
BS 3531-5.3:1991, ISO 5835:1991 BS 3531-5.3:1991, ISO 5835:1991. Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for the dimensions of screws having hexagonal drive con
BS 3531-5.7:1991, ISO 9714-1:1991 BS 3531-5.7:1991, ISO 9714-1:1991. Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for drill bits, taps and countersink cutters
BS 5463:Part 1:1991 BS 5463:Part 1:1991. Specification for high-voltage switches. High-voltage switches for rated voltages above 1 kV and less than 52 kV
BS EN 2310:1991 BS EN 2310:1991. Test methods for the flame resistance rating of non-metallic materials
BS 1186:Part 1:1991 BS 1186:Part 1:1991. Timber for and workmanship in joinery. Specification for timber
BS 2738-3:1991 BS 2738-3:1991. Spectacle lenses. Specification for the presentation of prescriptions and prescription orders for ophthalmic lenses
BS 3521-1:1991 BS 3521-1:1991. Terms relating to ophthalmic lenses and spectacle frames. Glossary of terms relating to ophthalmic lenses
BS 6100-2.5:1991 BS 6100-2.5:1991. Glossary of building and civil engineering terms. Civil engineering. Hydraulic engineering and construction work
BS 6221-11:1991, IEC 60326-11:1991 BS 6221-11:1991, IEC 60326-11:1991. Printed wiring boards. Specification for flex-rigid multilayer printed boards with through connections
BS 6840-10:1991, IEC 60268-10:1991 BS 6840-10:1991, IEC 60268-10:1991. Sound system equipment. Methods for specifying and measuring the characteristics of peak programme level meters
BS EN 268:1991 BS EN 268:1991. Specification for propellants for commercial ammunition. Requirements and test methods
BS EN 2790:1991 BS EN 2790:1991. Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1.5 thread. Dimensions and loads
BS EN 2791:1991 BS EN 2791:1991. Rod ends, adjustable, single fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads
BS 2G 230:1991 BS 2G 230:1991. Specification for general requirements for aircraft electrical cables (second series)
BS 3531-5.6:1991, ISO 6475:1989 BS 3531-5.6:1991, ISO 6475:1989. Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for the mechanical requirements and test methods for sc
DD ENV 41509:1991 DD ENV 41509:1991. Information systems interconnection. Office document architecture (ODA). Document application profile. Processable and formatted documents. Basic character content
BS 3999-2:1991 BS 3999-2:1991. Methods of measuring the performance of household electrical appliances. Thermal storage electric water-heaters
BS 6817:1991 BS 6817:1991. Specification for porcelain denture teeth
BS 7456:1991 BS 7456:1991. Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems
BS 7460:1991 BS 7460:1991. Code of practice for use of spray extraction machines on carpets and soft floor coverings in hospitals
BS EN 253:1991 BS EN 253:1991. Specification for preinsulated bonded pipe systems for underground hot water networks. Pipe assembly of steel service pipes, polyurethane thermal insulation and outer ca
BS EN 60335-2-56:1991 BS EN 60335-2-56:1991. Specification for safety of household and similar electrical appliances. Particular requirements. Projectors and similar appliances
BS 6221-3:1991, IEC 60326-3:1991 BS 6221-3:1991, IEC 60326-3:1991. Printed wiring boards. Guide for the design and use of printed wiring boards
BS 7436:Part 1:1991 BS 7436:Part 1:1991. Data transfer between agricultural tractors and attached machinery. Specification for data bus protocol
BS 3015:1991, ISO 2041:1990 BS 3015:1991, ISO 2041:1990. Glossary of terms relating to mechanical vibration and shock
BS EN ISO 9029:1995 BS EN ISO 9029:1995. Crude petroleum. Determination of water. Distillation method
BS 7447:1991 BS 7447:1991. Method of test for determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources
BS 3724:1991 BS 3724:1991. Glossary of terms relating to fibre ropes and cordage
BS 7477:1991, IEC 60416:1988,ISO 3461-1:1988 BS 7477:1991, IEC 60416:1988,ISO 3461-1:1988. Guide for general principles for the creation of graphical symbols for use on equipment
BS 5258-16:1991 BS 5258-16:1991. Safety of domestic gas appliances. Specification for inset live fuel effect gas fires (2nd and 3rd family gases)
BS EN 264:1991 BS EN 264:1991. Specification for safety requirements and testing of safety shut-off devices for combustion plants using liquid fuels
BS EN 215-1:1991 BS EN 215-1:1991. Thermostatic radiator valves. Requirements and test methods
BS 4783-5:1991 BS 4783-5:1991. Storage, transportation and maintenance of media for use in data processing and information storage. Recommendations for 12.7 mm magnetic tape cartridges for data interc
BS 7461:1991 BS 7461:1991. Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas
BS ISO/IEC 10206:1991 BS ISO/IEC 10206:1991. Information technology. Programming languages. Extended Pascal
BS 341-1:1991 BS 341-1:1991. Transportable gas container valves. Specification for industrial valves for working pressures up to and including 300 bar
BS 6501-1:1991 BS 6501-1:1991. Flexible metallic hose assemblies. Specification for corrugated hose assemblies
BS 7482-1:1991 BS 7482-1:1991. Instrumentation for the measurement of vibration exposure of human beings. Specification for general requirements for instrumentation for measuring the vibration applied
BS 7482-2:1991 BS 7482-2:1991. Instrumentation for the measurement of vibration exposure of human beings. Specification for instrumentation for measuring vibration transmitted to the hand
BS 7482-3:1991 BS 7482-3:1991. Instrumentation for the measurement of vibration exposure of human beings. Specification for instrumentation for measuring vibration exposure to the whole body
BS 7117-2:1991 BS 7117-2:1991. Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel. Guide to installation
BS 7117-3:1991 BS 7117-3:1991. Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel. Guide to maintenance after installation
BS 6221-9:1991, IEC 60326-9:1991 BS 6221-9:1991, IEC 60326-9:1991. Printed wiring boards. Specification for flexible multilayer boards with through connections
BS 6221-10:1991, IEC 60326-10:1991 BS 6221-10:1991, IEC 60326-10:1991. Printed wiring boards. Specification for flex-rigid double-sided printed boards with through connections
BS ISO 4087:1991 BS ISO 4087:1991. Micrographics. Microfilming of newspapers for archival purposes on 35 mm microfilm
BS 1212-4:1991 BS 1212-4:1991. Float operated valves. Specification for compact type float operated valves for WC flushing cisterns (including floats)
BS 2598:Part 1:1991, ISO 3585:1991 BS 2598:Part 1:1991, ISO 3585:1991. Glass plant, pipeline and fittings. Specification for properties of borosilicate glass 3.3
BS 7476:1991 BS 7476:1991. Specification for polyethylene film for covering silage
BS 6246-5:1991 BS 6246-5:1991. Industrial laundry machinery. Methods for the assessment of the effect of shaped garment finishing machinery on textiles
BS 3604-2:1991 BS 3604-2:1991. Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties. Specification for longitudinally arc welded tubes
BS 5750-8:1991, EN 29004-2:1993,ISO 9004-2:1991 BS 5750-8:1991, EN 29004-2:1993,ISO 9004-2:1991. Quality systems. Guide to quality management and quality systems elements for services
BS 3970-2:1991 BS 3970-2:1991. Sterilizing and disinfecting equipment for medical products. Specification for steam sterilizers for aqueous fluids in sealed rigid containers
BS EN 50068:1991 BS EN 50068:1991. Specification for wrought steel enclosures for gas-filled high-voltage switchgear and controlgear
DD ENV 41111:1991 DD ENV 41111:1991. Information Systems Interconnection. ISDN. Provision of OSI connection-mode transport service over the OSI connection-mode network service by using an ISDN circuit
DD ENV 41508:1991 DD ENV 41508:1991. Information Systems Interconnection. East European graphic character repertoires and their coding
DD ENV 41506:1991 DD ENV 41506:1991. Information Systems Interconnection. Data stream formats for information received from or transmitted to the Teletex service or private information processing syst
DD ENV 41505:1991 DD ENV 41505:1991. Information Systems Interconnection. Graphic character repertoire and coding for line drawing
DD ENV 41504:1991 DD ENV 41504:1991. Information systems interconnection. Character repertoire and coding for interworking with Telex services
DD ENV 41503:1991 DD ENV 41503:1991. Information Systems Interconnection. European character repertoires and their coding
DD ENV 41502:1991 DD ENV 41502:1991. Information systems interconnection. Character repertoires for information received from or transmitted to the Teletex service or private information processing sy
DD ENV 41112:1991 DD ENV 41112:1991. Information Systems Interconnection. ISDN. Provision of the OSI connection-mode transport service over the OSI connection-mode network service by using an ISDN cir
BS EN 438-1:1991 BS EN 438-1:1991. Decorative high-pressure laminates (HPL) sheets based on thermosetting resins. Specifications
BS EN 27982-1:1991, ISO 7982-1:1987 BS EN 27982-1:1991, ISO 7982-1:1987. Bank telecommunication. Funds transfer messages. Vocabulary and data elements
BS EN 28583:1991, ISO 8583:1987 BS EN 28583:1991, ISO 8583:1987. Bank card originated messages. Interchange message specifications. Content for financial transactions
BS 7442-2:1991, ISO/TR 7621-2:1982 BS 7442-2:1991, ISO/TR 7621-2:1982. Rubber or plastics covered rollers. Recommendations for technical information to be provided by the purchaser
BS 5750:Part 13:1991, EN 29000-3:1993,ISO 9000-3:1991 BS 5750:Part 13:1991, EN 29000-3:1993,ISO 9000-3:1991. Quality systems. Guide to the application of BS 5750:Part 1 to the development, supply and
BS 3531-6.2:1991, ISO 5838-2:1991 BS 3531-6.2:1991, ISO 5838-2:1991. Implants for osteosynthesis. Skeletal pins and wires. Specification for dimensions of Steinmann skeletal pins
BS 7490:1991, ISO 10087:1990 BS 7490:1991, ISO 10087:1990. Specification for coding system for hull identification of small craft
BS 7442-3.2:1991, ISO 7267-2:1986 BS 7442-3.2:1991, ISO 7267-2:1986. Rubber or plastics covered rollers. Method of test. Determination of Shore hardness
BS 3602-2:1991 BS 3602-2:1991. Specification for steel pipes and tubes for pressure purposes: carbon and carbon manganese steel with specified elevated temperature properties. Specification for longit
BS 5262:1991 BS 5262:1991. Code of practice for external renderings
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
