BIS Standards Catalogue
BS 812-103.2:1989 BS 812-103.2:1989. Testing aggregates. Method for determination of particle size distribution. Sedimentation test
BS 4428:1989 BS 4428:1989. Code of practice for general landscape operations (excluding hard surfaces)
BS 7137:1989, ISO 9127:1988 BS 7137:1989, ISO 9127:1988. Specification for user documentation and cover information for consumer software packages
BS 8298:1989 BS 8298:1989. Code of practice for design and installation of natural stone cladding and lining
BS 4481-1:1989, ISO 525-1986 BS 4481-1:1989, ISO 525-1986. Bonded abrasive products. Specification for general features of abrasive wheels, segments, bricks and sticks
BS 2G 223:1989 BS 2G 223:1989. Specification for screen terminating devices for aircraft electric cables
BS 3951:Part 1:Section 1.1:1989, ISO 668:1988 BS 3951:Part 1:Section 1.1:1989, ISO 668:1988. Freight containers. General. Specification for Series 1 freight containers: Classification, dimensions and
BS 5655-11:1989 BS 5655-11:1989. Lifts and service lifts. Recommendations for the installation of new, and the modernization of, electric lifts in existing buildings
BS 6288-9:1989, IEC 60094-9:1988 BS 6288-9:1989, IEC 60094-9:1988. Magnetic tape sound recording and reproducing systems. Specification for magnetic tape cartridge for professional use
BS 6762:Part 3:1989, ISO 7420:1987 BS 6762:Part 3:1989, ISO 7420:1987. Services for leisure accommodation vehicles and transportable accommodation units. Specification for oil-fired heating systems
BS 7125:1989, ISO 5826-1983 BS 7125:1989, ISO 5826-1983. Specification for transformers for resistance welding machines
BS 6564:Part 1:Section 1.1:1989 BS 6564:Part 1:Section 1.1:1989. Polytetrafluoroethylene (PTFE) materials and products. Polytetrafluoroethylene powders for moulding and extrusion. Specification
BS 6564:Part 1:Section 1.2:1989 BS 6564:Part 1:Section 1.2:1989. Polytetrafluoroethylene (PTFE) materials and products. Polytetrafluoroethylene powders for moulding and extrusion. Method of specifying
BS 7085:1989 BS 7085:1989. Guide to safety aspects of experiments in which people are exposed to mechanical vibration and shock
BS 7188:1989 BS 7188:1989. Methods of test for impact absorbing playground surfaces
BS 6121-2:1989 BS 6121-2:1989. Mechanical cable glands. Specification for polymeric glands
BS 7019:1989 BS 7019:1989. Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines
BS 7122:1989 BS 7122:1989. Specification for welded steel tanks for the road transport of liquefiable gases
BS 7129:1989, ISO 5348:1987 BS 7129:1989, ISO 5348:1987. Recommendations for mechanical mounting of accelerometers for measuring mechanical vibration and shock
BS 4292-1:1989 BS 4292-1:1989. Method for specifying electroplated coatings of gold and gold alloys. Gold and gold alloys for engineering purposes
BS 5740:1989 BS 5740:1989. Specification for oblong flat-top cans for liquid products
BS 5817-20:1989, IEC 60574-20:1988 BS 5817-20:1989, IEC 60574-20:1988. Specification for audiovisual, video and television equipment and systems. Methods of measuring and reporting the performance of
BS 6043:Part 2:Section 2.11:1989, ISO 9406:1988 BS 6043:Part 2:Section 2.11:1989, ISO 9406:1988. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke.
BS 6068:Part 4:Section 4.5:1989, ISO 6222:1988 BS 6068:Part 4:Section 4.5:1989, ISO 6222:1988. Water quality. Microbiological methods. Method for the enumeration of viable micro-organisms: colony coun
BS 6288-10:1989, IEC 60094-10:1988 BS 6288-10:1989, IEC 60094-10:1988. Magnetic tape sound recording and reproducing systems. Specification for time and address codes
BS 6912-2:1989, ISO 5998:1986 BS 6912-2:1989, ISO 5998:1986. Safety of earth-moving machinery. Specification for rated operating load for crawler and wheel loaders
BS EN 60936:1993, IEC 60936:1988 BS EN 60936:1993, IEC 60936:1988. Shipborne radar. Operational and performance requirements. Methods of test and required test results
BS 2M 51:1989, ISO 6771:1987 BS 2M 51:1989, ISO 6771:1987. Classification for pressure and temperature for fluid systems and components
BS 1983-5:1989 BS 1983-5:1989. Chucks for machine tools and portable power tools. Code of practice for the safe operation of workholding chucks used on lathes
BS 4292-2:1989 BS 4292-2:1989. Method for specifying electroplated coatings of gold and gold alloys. Gold and gold alloys for decorative and protective purposes
BS 5817-3:1989, IEC 60574-3:1983 BS 5817-3:1989, IEC 60574-3:1983. Specification for audiovisual, video and television equipment and systems. Specification for connectors for the interconnection of eq
BS 5929-6:1989, ISO 8587:1988 BS 5929-6:1989, ISO 8587:1988. Methods for sensory analysis of food. Ranking
BS 6914:Part 6:1989, ISO 6747-1988 BS 6914:Part 6:1989, ISO 6747-1988. Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Terminology for self-propelled crawler
BS 7132:1989, IEC 60887:1988 BS 7132:1989, IEC 60887:1988. Nomenclature for glass bulb designation system for lamps
BS 5942-13:1989, IEC 60581-13:1988 BS 5942-13:1989, IEC 60581-13:1988. High fidelity audio equipment and systems; minimum performance requirements. Specification for high fidelity systems for use in v
BS 696-1:1989 BS 696-1:1989. Determination of fat content of milk and milk products (Gerber method). Specification for apparatus
BS 5817-18:1989, IEC 60574-18:1987 BS 5817-18:1989, IEC 60574-18:1987. Specification for audiovisual, video and television equipment and systems. Specification for connectors for automatic slide proje
BS EN ISO 4524-6:1995 BS EN ISO 4524-6:1995. Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Determination of the presence of residual salts
BS 7138:1989, EN 29069:1990,ISO 9069:1988 BS 7138:1989, EN 29069:1990,ISO 9069:1988. Guide to SGML Document Interchange Format (SDIF)
BS 6669-3:1989, ISO 4522-3:1988 BS 6669-3:1989, ISO 4522-3:1988. Methods of test for electroplated silver and silver alloy coatings. Detection of residual salts
BS 812-124:1989 BS 812-124:1989. Testing aggregates. Method for determination of frost-heave
BS 1042-2.4:1989, ISO 3354:1988 BS 1042-2.4:1989, ISO 3354:1988. Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of clean water flow using current meters in
BS 1892-2.11:1989 BS 1892-2.11:1989. Gymnasium equipment. Particular requirements. Specification for practice and games netting and supporting trackways
BS 2080:1989 BS 2080:1989. Specification for face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves
BS 3195:Part 1:1989, ISO 3170:1988 BS 3195:Part 1:1989, ISO 3170:1988. Methods for sampling petroleum products. Manual sampling of liquid hydrocarbons
BS 3496:1989 BS 3496:1989. Specification for E glass fibre chopped strand mat for reinforcement of polyester and other liquid laminating systems
BS 3951:Part 1:Section 1.5:1989 BS 3951:Part 1:Section 1.5:1989. Freight containers. General. Guide to the handling and securing of series 1 freight containers
BS 1902:Part 3:Section 3.7:1989, ISO 5016:1986 BS 1902:Part 3:Section 3.7:1989, ISO 5016:1986. Methods of testing refractory materials. General and textural properties. Determination of bulk density a
BS 1902:Part 3:Section 3.8:1989, ISO 5017:1988 BS 1902:Part 3:Section 3.8:1989, ISO 5017:1988. Methods of testing refractory materials. General and textural properties. Determination of bulk density,
BS EN 25651:1993, ISO 5651:1989 BS EN 25651:1993, ISO 5651:1989. Specification for units for expressing properties of paper, board and pulps
BS 6429:1989, ISO 6936:1988 BS 6429:1989, ISO 6936:1988. Method for conversion between the two coded character sets of BS 4730 (ISO 646) and BS 6692:Part 2 (ISO 6937-2) and the CCITT international tel
BS 7135-1:1989, EN 27779:1991,ISO 7779:1988 BS 7135-1:1989, EN 27779:1991,ISO 7779:1988. Noise emitted by computer and business equipment. Method of measurement of airborne noise
BS 8010-2.5:1989 BS 8010-2.5:1989. Code of practice for pipelines. Pipelines on land: design, construction and installation. Glass reinforced thermosetting plastics
BS 770-4:1989, ISO 5943-1988 BS 770-4:1989, ISO 5943-1988. Methods for chemical analysis of cheese. Determination of chloride content
BS 4317-21:1989, ISO 5530-2:1988 BS 4317-21:1989, ISO 5530-2:1988. Methods of test for cereals and pulses. Determination of rheological properties of doughs using an extensograph
BS 5978-1:1989 BS 5978-1:1989. Safety and performance of gas-fired hot water boilers (60 kW to 2 MW input). Specification for general requirements
BS 5978-2:1989 BS 5978-2:1989. Safety and performance of gas-fired hot water boilers (60 kW to 2 MW input). Specification for additional requirements for boilers with atmospheric burners
BS 5978-3:1989 BS 5978-3:1989. Safety and performance of gas-fired hot water boilers (60 kW to 2 MW input). Specification for additional requirements for boilers with forced or induced draught burners
BS 6043-1.9:1989, ISO 9055:1988 BS 6043-1.9:1989, ISO 9055:1988. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulphur conten
BS EN 60945:1993, IEC 60945:1988 BS EN 60945:1993, IEC 60945:1988. Marine navigational equipment. General requirements. Methods of testing and required test results
BS 7074-3:1989 BS 7074-3:1989. Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems. Code of practice for chilled and condenser systems
BS 812-103.2:1989 BS 812-103.2:1989. Testing aggregates. Method for determination of particle size distribution. Sedimentation test
BS 4428:1989 BS 4428:1989. Code of practice for general landscape operations (excluding hard surfaces)
BS 7137:1989, ISO 9127:1988 BS 7137:1989, ISO 9127:1988. Specification for user documentation and cover information for consumer software packages
BS 8298:1989 BS 8298:1989. Code of practice for design and installation of natural stone cladding and lining
BS 4481-1:1989, ISO 525-1986 BS 4481-1:1989, ISO 525-1986. Bonded abrasive products. Specification for general features of abrasive wheels, segments, bricks and sticks
BS 2G 223:1989 BS 2G 223:1989. Specification for screen terminating devices for aircraft electric cables
BS 3951:Part 1:Section 1.1:1989, ISO 668:1988 BS 3951:Part 1:Section 1.1:1989, ISO 668:1988. Freight containers. General. Specification for Series 1 freight containers: Classification, dimensions and
BS 5655-11:1989 BS 5655-11:1989. Lifts and service lifts. Recommendations for the installation of new, and the modernization of, electric lifts in existing buildings
BS 6288-9:1989, IEC 60094-9:1988 BS 6288-9:1989, IEC 60094-9:1988. Magnetic tape sound recording and reproducing systems. Specification for magnetic tape cartridge for professional use
BS 6762:Part 3:1989, ISO 7420:1987 BS 6762:Part 3:1989, ISO 7420:1987. Services for leisure accommodation vehicles and transportable accommodation units. Specification for oil-fired heating systems
BS 7125:1989, ISO 5826-1983 BS 7125:1989, ISO 5826-1983. Specification for transformers for resistance welding machines
BS 6564:Part 1:Section 1.1:1989 BS 6564:Part 1:Section 1.1:1989. Polytetrafluoroethylene (PTFE) materials and products. Polytetrafluoroethylene powders for moulding and extrusion. Specification
BS 6564:Part 1:Section 1.2:1989 BS 6564:Part 1:Section 1.2:1989. Polytetrafluoroethylene (PTFE) materials and products. Polytetrafluoroethylene powders for moulding and extrusion. Method of specifying
BS 7085:1989 BS 7085:1989. Guide to safety aspects of experiments in which people are exposed to mechanical vibration and shock
BS 7188:1989 BS 7188:1989. Methods of test for impact absorbing playground surfaces
BS 6121-2:1989 BS 6121-2:1989. Mechanical cable glands. Specification for polymeric glands
BS 7019:1989 BS 7019:1989. Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines
BS 7122:1989 BS 7122:1989. Specification for welded steel tanks for the road transport of liquefiable gases
BS 7129:1989, ISO 5348:1987 BS 7129:1989, ISO 5348:1987. Recommendations for mechanical mounting of accelerometers for measuring mechanical vibration and shock
BS 4292-1:1989 BS 4292-1:1989. Method for specifying electroplated coatings of gold and gold alloys. Gold and gold alloys for engineering purposes
BS 5740:1989 BS 5740:1989. Specification for oblong flat-top cans for liquid products
BS 5817-20:1989, IEC 60574-20:1988 BS 5817-20:1989, IEC 60574-20:1988. Specification for audiovisual, video and television equipment and systems. Methods of measuring and reporting the performance of
BS 6043:Part 2:Section 2.11:1989, ISO 9406:1988 BS 6043:Part 2:Section 2.11:1989, ISO 9406:1988. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke.
BS 6068:Part 4:Section 4.5:1989, ISO 6222:1988 BS 6068:Part 4:Section 4.5:1989, ISO 6222:1988. Water quality. Microbiological methods. Method for the enumeration of viable micro-organisms: colony coun
BS 6288-10:1989, IEC 60094-10:1988 BS 6288-10:1989, IEC 60094-10:1988. Magnetic tape sound recording and reproducing systems. Specification for time and address codes
BS 6912-2:1989, ISO 5998:1986 BS 6912-2:1989, ISO 5998:1986. Safety of earth-moving machinery. Specification for rated operating load for crawler and wheel loaders
BS EN 60936:1993, IEC 60936:1988 BS EN 60936:1993, IEC 60936:1988. Shipborne radar. Operational and performance requirements. Methods of test and required test results
BS 2M 51:1989, ISO 6771:1987 BS 2M 51:1989, ISO 6771:1987. Classification for pressure and temperature for fluid systems and components
BS 1983-5:1989 BS 1983-5:1989. Chucks for machine tools and portable power tools. Code of practice for the safe operation of workholding chucks used on lathes
BS 4292-2:1989 BS 4292-2:1989. Method for specifying electroplated coatings of gold and gold alloys. Gold and gold alloys for decorative and protective purposes
BS 5817-3:1989, IEC 60574-3:1983 BS 5817-3:1989, IEC 60574-3:1983. Specification for audiovisual, video and television equipment and systems. Specification for connectors for the interconnection of eq
BS 5929-6:1989, ISO 8587:1988 BS 5929-6:1989, ISO 8587:1988. Methods for sensory analysis of food. Ranking
BS 6914:Part 6:1989, ISO 6747-1988 BS 6914:Part 6:1989, ISO 6747-1988. Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Terminology for self-propelled crawler
BS 7132:1989, IEC 60887:1988 BS 7132:1989, IEC 60887:1988. Nomenclature for glass bulb designation system for lamps
BS 5942-13:1989, IEC 60581-13:1988 BS 5942-13:1989, IEC 60581-13:1988. High fidelity audio equipment and systems; minimum performance requirements. Specification for high fidelity systems for use in v
BS 696-1:1989 BS 696-1:1989. Determination of fat content of milk and milk products (Gerber method). Specification for apparatus
BS 5817-18:1989, IEC 60574-18:1987 BS 5817-18:1989, IEC 60574-18:1987. Specification for audiovisual, video and television equipment and systems. Specification for connectors for automatic slide proje
BS EN ISO 4524-6:1995 BS EN ISO 4524-6:1995. Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Determination of the presence of residual salts
BS 7138:1989, EN 29069:1990,ISO 9069:1988 BS 7138:1989, EN 29069:1990,ISO 9069:1988. Guide to SGML Document Interchange Format (SDIF)
BS 6669-3:1989, ISO 4522-3:1988 BS 6669-3:1989, ISO 4522-3:1988. Methods of test for electroplated silver and silver alloy coatings. Detection of residual salts
BS 812-124:1989 BS 812-124:1989. Testing aggregates. Method for determination of frost-heave
BS 1042-2.4:1989, ISO 3354:1988 BS 1042-2.4:1989, ISO 3354:1988. Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of clean water flow using current meters in
BS 1892-2.11:1989 BS 1892-2.11:1989. Gymnasium equipment. Particular requirements. Specification for practice and games netting and supporting trackways
BS 2080:1989 BS 2080:1989. Specification for face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves
BS 3195:Part 1:1989, ISO 3170:1988 BS 3195:Part 1:1989, ISO 3170:1988. Methods for sampling petroleum products. Manual sampling of liquid hydrocarbons
BS 3496:1989 BS 3496:1989. Specification for E glass fibre chopped strand mat for reinforcement of polyester and other liquid laminating systems
BS 3951:Part 1:Section 1.5:1989 BS 3951:Part 1:Section 1.5:1989. Freight containers. General. Guide to the handling and securing of series 1 freight containers
BS 1902:Part 3:Section 3.7:1989, ISO 5016:1986 BS 1902:Part 3:Section 3.7:1989, ISO 5016:1986. Methods of testing refractory materials. General and textural properties. Determination of bulk density a
BS 1902:Part 3:Section 3.8:1989, ISO 5017:1988 BS 1902:Part 3:Section 3.8:1989, ISO 5017:1988. Methods of testing refractory materials. General and textural properties. Determination of bulk density,
BS EN 25651:1993, ISO 5651:1989 BS EN 25651:1993, ISO 5651:1989. Specification for units for expressing properties of paper, board and pulps
BS 6429:1989, ISO 6936:1988 BS 6429:1989, ISO 6936:1988. Method for conversion between the two coded character sets of BS 4730 (ISO 646) and BS 6692:Part 2 (ISO 6937-2) and the CCITT international tel
BS 7135-1:1989, EN 27779:1991,ISO 7779:1988 BS 7135-1:1989, EN 27779:1991,ISO 7779:1988. Noise emitted by computer and business equipment. Method of measurement of airborne noise
BS 8010-2.5:1989 BS 8010-2.5:1989. Code of practice for pipelines. Pipelines on land: design, construction and installation. Glass reinforced thermosetting plastics
BS 770-4:1989, ISO 5943-1988 BS 770-4:1989, ISO 5943-1988. Methods for chemical analysis of cheese. Determination of chloride content
BS 4317-21:1989, ISO 5530-2:1988 BS 4317-21:1989, ISO 5530-2:1988. Methods of test for cereals and pulses. Determination of rheological properties of doughs using an extensograph
BS 5978-1:1989 BS 5978-1:1989. Safety and performance of gas-fired hot water boilers (60 kW to 2 MW input). Specification for general requirements
BS 5978-2:1989 BS 5978-2:1989. Safety and performance of gas-fired hot water boilers (60 kW to 2 MW input). Specification for additional requirements for boilers with atmospheric burners
BS 5978-3:1989 BS 5978-3:1989. Safety and performance of gas-fired hot water boilers (60 kW to 2 MW input). Specification for additional requirements for boilers with forced or induced draught burners
BS 6043-1.9:1989, ISO 9055:1988 BS 6043-1.9:1989, ISO 9055:1988. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulphur conten
BS EN 60945:1993, IEC 60945:1988 BS EN 60945:1993, IEC 60945:1988. Marine navigational equipment. General requirements. Methods of testing and required test results
BS QC 300501:1990, IEC 60384-6-1:1987 BS QC 300501:1990, IEC 60384-6-1:1987. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic
BS 4F 57:1990 BS 4F 57:1990. Specification for scoured cotton fabric for inflatable equipment for aerospace purposes
BS 9752:1989 BS 9752:1989. Blank detail specification for fixed insulated (unshielded) r.f. inductors suitable for surface mounting at the full assessment level
BS 3531:Part 5:Section 5.1:1990, ISO 8319/1-1986 BS 3531:Part 5:Section 5.1:1990, ISO 8319/1-1986. Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for keys for use with
BS 3795:1990 BS 3795:1990. Specification for matches
BS 4975:1990 BS 4975:1990. Specification for prestressed concrete pressure vessels for nuclear engineering
BS 6157:1990 BS 6157:1990. Specification for industrial sewing threads made wholly or partly from synthetic fibres
BS 7193:1989 BS 7193:1989. Specification for lined lightweight rubber overshoes and overboots
BS 7251:Part 2:1990, ISO 7207-1:1985 BS 7251:Part 2:1990, ISO 7207-1:1985. Orthopaedic joint prostheses. Specification for classification and designation of dimensions for knee joint prostheses
BS 7251:Part 4:1990, ISO 7206-2:1987 BS 7251:Part 4:1990, ISO 7206-2:1987. Orthopaedic joint prostheses. Specification for bearing surfaces of hip joint prostheses
BS 7251:Part 6:1990, ISO 7206-3:1988 BS 7251:Part 6:1990, ISO 7206-3:1988. Orthopaedic joint prostheses. Method for determination of endurance properties of stemmed femoral components of hip joint pro
BS 7251-1:1990 BS 7251-1:1990. Orthopaedic joint prostheses. Specification for general requirements
BS 7251:Part 3:1990 BS 7251:Part 3:1990. Orthopaedic joint prostheses. Specification for classification, designation of dimensions and requirements for hip joint prostheses
BS 7252:Part 1:1990, ISO 5832-1:1987 BS 7252:Part 1:1990, ISO 5832-1:1987. Metallic materials for surgical implants. Specification for wrought stainless steel
BS 7252:Part 6:1990, ISO 5832-6:1980 BS 7252:Part 6:1990, ISO 5832-6:1980. Metallic materials for surgical implants. Specification for wrought cobalt-nickel-chromium-molybdenum alloy
BS 7252:Part 8:1990, ISO 5832-8:1984 BS 7252:Part 8:1990, ISO 5832-8:1984. Metallic materials for surgical implants. Specification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy
BS 7254:Part 1:1990, ISO 6018:1987 BS 7254:Part 1:1990, ISO 6018:1987. Orthopaedic implants. Specification for marking, packaging and labelling
BS 1000[620]:1990 BS 1000[620]:1990. Universal Decimal Classification. English full edition. Materials testing. Commercial materials. Power stations. Economics of energy
BS 1365:1990 BS 1365:1990. Specification for short-range short-stem thermometers
BS 1435-2:1990 BS 1435-2:1990. Rubber hose assemblies for oil suction and discharge services. Recommendations for storage, testing and use
BS 2571:1990 BS 2571:1990. Specification for general-purpose flexible PVC compounds for moulding and extrusion
BS 3531-5.2:1990, ISO 8319-2:1986 BS 3531-5.2:1990, ISO 8319-2:1986. Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for screwdrivers for screws having heads with singl
BS 3531-5.5:1990 BS 3531-5.5:1990. Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for taps and drills
BS 4584:Part 102:Section 102.5:1990, IEC 60249-2-5:1987 BS 4584:Part 102:Section 102.5:1990, IEC 60249-2-5:1987. Metal-clad base materials for printed wiring boards. Copper-clad base materials. Specif
BS 5188:1990 BS 5188:1990. Specification for non-refillable metallic containers up to 1.4 litres capacity and 85 mm diameter for liquefied or compressed non-flammable gases
BS 5636:1990 BS 5636:1990. Method for determination of permeability of fabrics to air
BS 7066-1:1990, EN 152-1:1988 BS 7066-1:1990, EN 152-1:1988. Wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in servic
BS 7066-2:1990, EN 152-2:1988 BS 7066-2:1990, EN 152-2:1988. Wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in servic
BS 7116:1990 BS 7116:1990. Specification for double sided pressure sensitive adhesive tapes
BS 7141-5:1990 BS 7141-5:1990. Narrow fabrics. Specification for elastic flat braids containing natural rubber
BS 7244:1990 BS 7244:1990. Specification for flame arresters for general use
BS 7251-5:1990 BS 7251-5:1990. Orthopaedic joint prostheses. Method for determination of endurance properties of stemmed femoral components of hip joint prostheses with application of torsion
BS 7252:Part 4:1990, ISO 5832-4:1978 BS 7252:Part 4:1990, ISO 5832-4:1978. Metallic materials for surgical implants. Specification for cobalt-chromium-molybdenum casting alloy
DD 184:1990 DD 184:1990. Method for the determination of the wheel tracking rate of cores of bituminous wearing courses
BS 791:1990 BS 791:1990. Specification for solid-stem calorimeter thermometers
BS 3130-2:1990 BS 3130-2:1990. Glossary of packaging terms. Paper and board packaging
BS 5248:1990 BS 5248:1990. Specification for aspirated hygrometer
BS 7225-3.1:1990 BS 7225-3.1:1990. Classification of refractories. Ceramic fibre products. Blankets, mats, felts and paper
BS 7254-2:1990 BS 7254-2:1990. Orthopaedic implants. Specification for general requirements for materials and finish
BS QC 410000:1990, IEC 60393-1:1989 BS QC 410000:1990, IEC 60393-1:1989. Harmonized system of quality assessment for electronic components: potentiometers for use in electronic equipment
BS QC 410100:1990, IEC 60393-2:1989,QC 410100 BS QC 410100:1990, IEC 60393-2:1989,QC 410100. Harmonized system of quality assessment for electronic components. Potentiometers for use in electronic equ
BS AU 172c:1990 BS AU 172c:1990. Specification for performance requirements for accessory jacks for vehicles
BS 144:Part 1:1990 BS 144:Part 1:1990. Wood preservation using coal tar creosotes. Specification for preservative
BS 3895:1976 BS 3895:1976. Guide to the design, testing and use of packaging for the safe transport of radioactive materials
BS 144:Part 2:1990 BS 144:Part 2:1990. Wood preservation using coal tar creosotes. Methods for timber treatment
BS 1017-1:1989 BS 1017-1:1989. Sampling of coal and coke. Methods for sampling of coal
BS 1248-1:1990, EN 235:1989 BS 1248-1:1990, EN 235:1989. Wallcoverings in roll form. Terms and symbols
BS 1248:Part 2:1990, EN 233:1989 BS 1248:Part 2:1990, EN 233:1989. Wallcoverings in roll form. Specification for finished wallcoverings
BS 1248:Part 3:1990, EN 234:1989 BS 1248:Part 3:1990, EN 234:1989. Wallcoverings in roll form. Specification for wallcoverings for subsequent decoration
BS 3936-2:1990 BS 3936-2:1990. Nursery stock. Specification for roses
BS 5268-7.6:1990 BS 5268-7.6:1990. Structural use of timber. Recommendations for the calculation basis for span tables. Purlins supporting rafters
BS 6200-3.10.2:1989, EN 10188:1989 BS 6200-3.10.2:1989, EN 10188:1989. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of chromium. Steel and cast iro
BS 7264-1:1990, IEC 60871-1:1987 BS 7264-1:1990, IEC 60871-1:1987. Shunt capacitors for a.c. power systems having a rated voltage above 1000 V. Specification for performance, testing and use
BS 7265:1990 BS 7265:1990. Code of practice for assessing the cleanliness of hydraulic fluid power components
BS 2F 121:1989 BS 2F 121:1989. Metallic slide fasteners for aerospace purposes
BS 5268-4.2:1990 BS 5268-4.2:1990. Structural use of timber. Fire resistance of timber structures. Recommendations for calculating fire resistance of timber stud walls and joisted floor constructions
BS 7207:1990 BS 7207:1990. Specification for crude vegetable fats
BS CECC 40401:1990 BS CECC 40401:1990. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed low power non-wirewound surface mounting (
PP 7307:1989 PP 7307:1989. Graphical symbols for use in schools and colleges
BS QC 750102:1990, IEC 60747-7-1:1989 BS QC 750102:1990, IEC 60747-7-1:1989. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank
BS QC 750103:1990, IEC 60747-7-2:1989 BS QC 750103:1990, IEC 60747-7-2:1989. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank
BS QC 750108:1990, IEC 60747-2-1:1989 BS QC 750108:1990, IEC 60747-2-1:1989. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank
BS QC 750110:1990, IEC 60747-6-1:1989 BS QC 750110:1990, IEC 60747-6-1:1989. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank
BS 1902-5.3:1990 BS 1902-5.3:1990. Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal expansion (horizontal method to 1100°C) (method 1902-503)
BS 3969:1990 BS 3969:1990. Recommendations for turf for general purposes
BS 6208:1990 BS 6208:1990. Method for ultrasonic testing of ferritic steel castings including quality levels
BS 6396:1990 BS 6396:1990. Specification for electrical systems in office furniture and office screens
BS 7174:Part 4:1990 BS 7174:Part 4:1990. Sterile intravascular catheters and ancillary devices for single use. Specification for introducer needles, introducer cannulae, guide wires, dilators, valves
BS 7209:1990 BS 7209:1990. Specification for water vapour permeable apparel fabrics
BS 7141-4:1990 BS 7141-4:1990. Narrow fabrics. Specification for woven elastic webbings containing natural rubber
BS 7252:Part 3:1990 BS 7252:Part 3:1990. Metallic materials for surgical implants. Specification for wrought titanium 6-aluminium 4-vanadium alloy
BS 7253:Part 2:1990, ISO 6474:1981 BS 7253:Part 2:1990, ISO 6474:1981. Non-metallic materials for surgical implants. Specification for ceramic materials based on alumina
BS 7253-3:1990 BS 7253-3:1990. Non-metallic materials for surgical implants. Specification for surgical implants made of heat-vulcanized silicone elastomer
BS 7263:Part 2:1990 BS 7263:Part 2:1990. Precast concrete flags, kerbs, channels, edgings and quadrants. Code of practice for laying
BS 7234:Part 1:1990 BS 7234:Part 1:1990. Heat meters. Specification: general requirements
BS 7234:Part 2:1990 BS 7234:Part 2:1990. Heat meters. Specification for installation
BS 7234:Part 3:1990 BS 7234:Part 3:1990. Heat meters. Methods of test for pattern approval and initial verification
BS 1377-5:1990 BS 1377-5:1990. Methods of test for soils for civil engineering purposes. Compressibility, permeability and durability tests
BS 7174:Part 1:1990 BS 7174:Part 1:1990. Sterile intravascular catheters and ancillary devices for single use. Specification for general requirements
BS 1262:1989 BS 1262:1989. Specification for round lever lid tinplate cans, paint range
BS 7134-4.1:1990 BS 7134-4.1:1990. Testing of engineering ceramics. Thermo-physical properties. Method for determination of thermal expansion
BS 7231-1:1990 BS 7231-1:1990. Body measurements of boys and girls from birth up to 16.9 years. Information in the form of tables
BS 7231-2:1990 BS 7231-2:1990. Body measurements of boys and girls from birth up to 16.9 years. Recommendations of body dimensions for children
BS 131:Part 7:1990 BS 131:Part 7:1990. Notched bar tests. Specification for verification of the test machine used for precision determination of Charpy V-notch impact energies for metals
BS 692:1990 BS 692:1990. Specification for meteorological thermometers
BS 1881-209:1990 BS 1881-209:1990. Testing concrete. Recommendations for the measurement of dynamic modulus of elasticity
BS 5761:Part 2:1990, EN 84:1989 BS 5761:Part 2:1990, EN 84:1989. Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Leaching procedure
BS 402:Part 1:1990 BS 402:Part 1:1990. Clay roofing tiles and fittings. Specification for plain tiles and fittings
BS 7106:Part 5:1989, EN 27811-5:1989,ISO 7811-5:1985 BS 7106:Part 5:1989, EN 27811-5:1989,ISO 7811-5:1985. Guide to recording techniques for information on identification cards. Location of read-write
BS 7275-1:1990, ISO 4392-1:1989 BS 7275-1:1990, ISO 4392-1:1989. Determination of hydraulic fluid power motor characteristics. Method at constant low speed and at constant pressure
BS 1192:Part 5:1990 BS 1192:Part 5:1990. Construction drawing practice. Guide for structuring of computer graphic information
BS 3823:1990 BS 3823:1990. Grading of ash and hickory wood handles for hand tools
BS 6164:1990 BS 6164:1990. Code of practice for safety in tunnelling in the construction industry
BS 4034:1990 BS 4034:1990. Specification for vitrified hotelware
BS 5416:1990 BS 5416:1990. Specification for china tableware
BS 5293-1:1990, ISO 1124:1988 BS 5293-1:1990, ISO 1124:1988. Sampling and testing carbon black for use in the rubber industry. Methods of sampling
BS 5293:Part 2:1990, ISO 1306:1987 BS 5293:Part 2:1990, ISO 1306:1987. Sampling and testing carbon black for use in the rubber industry. Method for determination of pour density
BS 5293:Part 3:1990, ISO 1435:1988 BS 5293:Part 3:1990, ISO 1435:1988. Sampling and testing carbon black for use in the rubber industry. Method for determination of fines content
BS 5293:Part 4:1990, ISO 8511:1987 BS 5293:Part 4:1990, ISO 8511:1987. Sampling and testing carbon black for use in the rubber industry. Method for determination of pellet size distribution
BS 3762-3.11:1989 BS 3762-3.11:1989. Analysis of formulated detergents. Quantitative test methods. Method for determination of free formaldehyde content
BS 7298:1990 BS 7298:1990. Schedule of requirements and recommendations for cards to be used in electronic funds transfer at point of sale (EFT-POS)
BS 8000-5:1990 BS 8000-5:1990. Workmanship on building sites. Code of practice for carpentry, joinery and general fixings
BS 8000-6:1990 BS 8000-6:1990. Workmanship on building sites. Code of practice for slating and tiling of roofs and claddings
BS 5955-8:1990 BS 5955-8:1990. Plastics pipework (thermoplastics materials). Specification for the installation of thermoplastics pipes and associated fittings for use in domestic hot and cold water s
BS 1881-127:1990 BS 1881-127:1990. Testing concrete. Method of verifying the performance of a concrete cube compression machine using the comparative cube test
BS 3424:Part 9:1990 BS 3424:Part 9:1990. Testing coated fabrics. Methods 11A, 11B, 11C and 11D. Methods for determination of resistance to damage by flexing
BS 4742-8:1990 BS 4742-8:1990. Hydraulic equipment for agricultural machinery. Method for colour coding of remote hydraulic power services and controls on agricultural tractors
BS 5546:1990 BS 5546:1990. Specification for installation of gas hot water supplies for domestic purposes (1st, 2nd and 3rd family gases)
BS 7087:Part 3:1990 BS 7087:Part 3:1990. Herbs and spices ready for food use. Specification for dried sage (whole and ground)
BS 7087:Part 4:1990 BS 7087:Part 4:1990. Herbs and spices ready for food use. Specification for cloves (whole and ground)
BS 7087:Part 5:1990 BS 7087:Part 5:1990. Herbs and spices ready for food use. Specification for dried cumin (whole and ground)
BS 7087:Part 6:1990 BS 7087:Part 6:1990. Herbs and spices ready for food use. Specification for coriander seeds (whole and ground)
BS 8000-11.2:1990 BS 8000-11.2:1990. Workmanship on building sites. Code of practice for wall and floor tiling. Natural stone tiles
BS 2G 198:Part 4:1990 BS 2G 198:Part 4:1990. Sleeves for aircraft electric cables and equipment wires. Specification for semi-rigid high performance heat shrinkable sleeving for binding and insulation
BS 5908:1990 BS 5908:1990. Code of practice for fire precautions in the chemical and allied industries
BS 8000-15:1990 BS 8000-15:1990. Workmanship on building sites. Code of practice for hot and cold water services (domestic scale)
BS 5397-6:1990, ISO 7478:1987 BS 5397-6:1990, ISO 7478:1987. High-level data link control (HDLC) procedures. Specification for multilink procedures
BS 6788-2:1990 BS 6788-2:1990. Neurosurgical implants. Specification for marking and packaging of implantable neural stimulators
BS 6940-1:1989 BS 6940-1:1989. Total Access Communication System (T.A.C.S). Specification for performance requirements for mobile stations
BS 6940-2:1989 BS 6940-2:1989. Total Access Communication System (T.A.C.S). Specification for performance and tests of the signalling system of mobile stations
BS L 171:1990 BS L 171:1990. Specification for forging of aluminium-zinc-magnesium-manganese-copper alloy (supplied as-forged or annealed for subsequent heat treatment) (not exceeding 150 mm diameter
BS 2000:Part 71:1990 BS 2000:Part 71:1990. Methods of test for petroleum and its products. Kinematic viscosity of transparent and opaque liquids and calculation of dynamic viscosity
BS 3573:1990 BS 3573:1990. Specification for polyolefin copper-conductor telecommunication cables
BS 3800:Part 1:1990 BS 3800:Part 1:1990. General tests for machine tools. Code of practice for testing geometric accuracy of machines operating under no load or finishing conditions
BS 3936-3:1990 BS 3936-3:1990. Nursery stock. Specification for fruit plants
PD 9004:1989 PD 9004:1989. BS 9000, CECC & IECQ UK administrative guide
BS 3876-2:1990 BS 3876-2:1990. Rope rollers, pulleys, mountings and assemblies for colliery track haulage. Specification for vertical spindle pulleys, mountings and assemblies
BS 5430-1:1990 BS 5430-1:1990. Periodic inspection, testing and maintenance of transportable gas containers (excluding dissolved acetylene containers). Specification for seamless steel containers of w
BS 6579-4:1990 BS 6579-4:1990. Safety fences and barriers for highways. Specification for components for tensioned rectangular hollow section beam (200 mm x 100 mm) safety fence
BS 7306:1990 BS 7306:1990. Procedures for the operation of the UK scheme for the allocation of ISO-DCC format OSI NSAP addresses (including the operation of the UK Registration Authority)
BS 8220-3:1990 BS 8220-3:1990. Guide for security of buildings against crime. Warehouses and distribution units
BS 6902-1:1990, EN 50061:1988 BS 6902-1:1990, EN 50061:1988. Cardiac pacemakers. Specification for implantable cardiac pacemakers
BS 5534:Part 1:1990 BS 5534:Part 1:1990. Code of practice for slating and tiling. Design
BS 8102:1990 BS 8102:1990. Code of practice for protection of structures against water from the ground
BS 855:1990 BS 855:1990. Specification for welded steel boilers for central heating and indirect hot water supply (rated output 44 kW to 3 MW)
BS 7291-3:1990 BS 7291-3:1990. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for crosslinked polyethyl
BS 7291-4:1990 BS 7291-4:1990. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for chlorinated polyvinyl
BS 7291-1:1990 BS 7291-1:1990. Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. General requirements
BS 6788-3:1990 BS 6788-3:1990. Neurosurgical implants. Specification for self-closing intracranial aneurysm clips
BS 638-9:1990, EN 50060:1989 BS 638-9:1990, EN 50060:1989. Arc welding power sources, equipment and accessories. Specification for power sources for manual arc welding with limited duty
BS 5150:1990 BS 5150:1990. Specification for cast iron gate valves
BS 7141-3:1990 BS 7141-3:1990. Narrow fabrics. Specification for wool tapes
BS 7268:1990 BS 7268:1990. Method of test for determination of fatigue pressure rating of metal pressure containing envelopes in hydraulic fluid power systems
BS 498:1990 BS 498:1990. Specification for rasps and engineers' files
BS 3424:Part 12:1990 BS 3424:Part 12:1990. Testing coated fabrics. Methods 14A, 14B, 14C, 14D and 14E. Accelerated ageing tests
BS 6144:1990 BS 6144:1990. Specification for expansion vessels using an internal diaphragm, for unvented hot water supply systems
BS 4729:1990 BS 4729:1990. Specification for dimensions of bricks of special shapes and sizes
BS 6143-2:1990 BS 6143-2:1990. Guide to the economics of quality. Prevention, appraisal and failure model
BS 5400-4:1990 BS 5400-4:1990. Steel, concrete and composite bridges. Code of practice for design of concrete bridges
DD 189:1990 DD 189:1990. Specification for the safety of condensing boilers (2nd and 3rd family gases)
BS 6803-3:1990 BS 6803-3:1990. Vehicle security alarm systems. Code of practice for the protection of vehicles and goods in transit
BS 7300:1990 BS 7300:1990. Code of practice for safeguarding of the hazard points on troughed belt conveyors
BS 8213-4:1990 BS 8213-4:1990. Windows, doors and rooflights. Code of practice for the installation of replacement windows and doorsets in dwellings
BS 5480:1990 BS 5480:1990. Specification for glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage
BS 6173:1990 BS 6173:1990. Specification for installation of gas-fired catering appliances for use in all types of catering establishments (1st, 2nd and 3rd family gases)
BS 6485:1990 BS 6485:1990. Specification for PVC-covered conductors for overhead power lines
BS EN 27418:1994, ISO 7418:1989 BS EN 27418:1994, ISO 7418:1989. Leisure accommodation vehicles. Vocabulary
BS 1212-1:1990 BS 1212-1:1990. Float operated valves. Specification for piston type float operated valves (copper alloy body) (excluding floats)
BS 1212-2:1990 BS 1212-2:1990. Float operated valves. Specification for diaphragm type float operated valves (copper alloy body) (excluding floats)
BS 3532:1990 BS 3532:1990. Method of specifying unsaturated polyester resin systems
BS 3876-5:1990 BS 3876-5:1990. Rope rollers, pulleys, mountings and assemblies for colliery track haulage. Specification for suspended pulley assemblies and clamps
BS3999 PT5 : 1990 BS3999 PT5 : 1990.
BS 7160:1990, EN 24565:1989,ISO 4565:1986 BS 7160:1990, EN 24565:1989,ISO 4565:1986. Specification for anchor chains for small craft
BS 7161:1990, EN 24566:1989,ISO 4566:1985 BS 7161:1990, EN 24566:1989,ISO 4566:1985. Specification for propeller shaft ends and bosses for inboard-engined pleasure craft
BS 7162:1990, EN 24567:1989,ISO 4567:1978 BS 7162:1990, EN 24567:1989,ISO 4567:1978. Specification for waste water fittings on yachts
BS 7163:1990, EN 28847:1989,ISO 8847:1987 BS 7163:1990, EN 28847:1989,ISO 8847:1987. Specification for wire rope and pulley steering systems on small craft
BS 7294:1990, ISO 6358:1989 BS 7294:1990, ISO 6358:1989. Methods for determination of flow-rate characteristics of pneumatic fluid power components
BS 7174:Part 5:1990 BS 7174:Part 5:1990. Sterile intravascular catheters and ancillary devices for single use. Specification for balloon dilatation catheters
BS 5173-102.10:1990 BS 5173-102.10:1990. Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Hydrostatic tests for oil suction and discharge hose
BS 1247-1:1990 BS 1247-1:1990. Manhole steps. Specification for galvanized ferrous or stainless steel manhole steps
BS 3849-4:1990 BS 3849-4:1990. Conical connectors for anaesthetic and respiratory equipment. Specification for 8.5 mm cones and sockets
BS 3876-1:1990 BS 3876-1:1990. Rope rollers, pulleys, mountings and assemblies for colliery track haulage. Specification for parallel barrel rollers, mountings and assemblies
BS 6332-6:1990 BS 6332-6:1990. Thermal performance of domestic gas appliances. Specification for thermal performance of combined appliances: fanned-circulation ducted-air heater/circulator
BS 7320:1990 BS 7320:1990. Specification for sharps containers
BS EN 2122:1994 BS EN 2122:1994. Washers, flat, in aluminium alloy, anodized or chromated
BS EN 2752:1990 BS EN 2752:1990. Specification for nuts, anchor, self locking fixed, two lug, reduced series, with counterbore. Classification: 1100 MPa/235°C
BS 1127-1:1990, EN 22568:1989,ISO 2568:1988 BS 1127-1:1990, EN 22568:1989,ISO 2568:1988. Screwing dies and dienuts. Specification for hand- and machine-operated circular screwing dies and hand-operate
BS 1127-2:1990, EN 24230:1989,ISO 4230:1987 BS 1127-2:1990, EN 24230:1989,ISO 4230:1987. Screwing dies and dienuts. Specification for hand- and machine-operated circular screwing dies for taper pipe t
BS 1127-3:1990, EN 24231:1989,ISO 4231:1987 BS 1127-3:1990, EN 24231:1989,ISO 4231:1987. Screwing dies and dienuts. Specification for hand- and machine-operated circular screwing dies for parallel pip
BS 4505-2:1990, ISO 1177:1985 BS 4505-2:1990, ISO 1177:1985. Digital data transmission. Character structure for start/stop and synchronous transmission
BS 4745:1990, ISO 5085-1:1989 BS 4745:1990, ISO 5085-1:1989. Method for determination of thermal resistance of textiles
BS 5212-2:1990 BS 5212-2:1990. Cold applied joint sealant systems for concrete pavements. Code of practice for the application and use of joint sealants
BS 5550-7.4.1:1990, ISO 2969:1987 BS 5550-7.4.1:1990, ISO 2969:1987. Cinematography. Production and presentation. Sound. Specifications and measurements for the B-chain electro-acoustic response of mo
BS 6913:Part 4:1990, ISO 6012:1989 BS 6913:Part 4:1990, ISO 6012:1989. Operation and maintenance of earth-moving machinery. Recommendations for service instrumentation
BS 7087:Part 7:1990 BS 7087:Part 7:1990. Herbs and spices ready for food use. Specification for dried fenugreek (whole or ground)
BS 7087:Part 8:1990 BS 7087:Part 8:1990. Herbs and spices ready for food use. Specification for dried ginger (whole and ground)
BS 7134:Part 4:Section 4.2:1990 BS 7134:Part 4:Section 4.2:1990. Testing of engineering ceramics. Thermo-physical properties. Method for the determination of thermal diffusivity, by the laser flash (o
BS 7222:1990, ISO 8602:1987 BS 7222:1990, ISO 8602:1987. Open systems interconnection: connectionless-mode transport protocol specification
BS 7285:1990, ISO 8626:1989 BS 7285:1990, ISO 8626:1989. Method for describing characteristics of servo-hydraulic test equipment for generating vibration
BS 7296-1:1990, ISO 7368:1989 BS 7296-1:1990, ISO 7368:1989. Cavities for hydraulic fluid power cartridge valves. Specification for two-port slip-in valves
BS 7297:Part 1:1990, ISO 8637:1989 BS 7297:Part 1:1990, ISO 8637:1989. Haemodialysers and related equipment. Specification for haemodialysers, haemofilters and haemoconcentrators
BS 7297:Part 2:1990, ISO 8638:1989 BS 7297:Part 2:1990, ISO 8638:1989. Haemodialysers and related equipment. Specification for extracorporeal circuits for use with haemodialysers, haemofilters and hae
BS 7312:1990, ISO 8833:1989 BS 7312:1990, ISO 8833:1989. Methods of test for magnetite for use in coal preparation
BS AU 193a:1990 BS AU 193a:1990. Specification for replacement motor cycle and moped exhaust systems
BS EN 2139:1990 BS EN 2139:1990. Specification for washers, flat heat resisting steel
BS EN 2367:1990 BS EN 2367:1990. Specification for split pins in steel EN 2573
BS 1127-4:1990, EN 25968:1989,ISO 5968:1981 BS 1127-4:1990, EN 25968:1989,ISO 5968:1981. Screwing dies and dienuts. Terminology for circular screwing dies
BS 1127-5:1990, ISO 7226:1985 BS 1127-5:1990, ISO 7226:1985. Screwing dies and dienuts. Specification for dimensions of hexagon dienuts
BS 6978-2:1990, ISO 7256-2:1984 BS 6978-2:1990, ISO 7256-2:1984. Seed drills. Methods of test for seed drills for rows
BS 7067:1990 BS 7067:1990. Guide to determination and presentation of float and sink characteristics of raw coal and of products from coal preparation plants
BS 903-0:1990 BS 903-0:1990. Physical testing of rubber. Introduction
BS 903-A15:1990, ISO 8013:1988 BS 903-A15:1990, ISO 8013:1988. Physical testing of rubber. Method for determination of creep in compression or shear
BS 949-4:1990, EN 22857:1989,ISO 2857:1973 BS 949-4:1990, EN 22857:1989,ISO 2857:1973. Screwing taps. Specification for metric ground thread taps: manufacturing tolerances
BS 949-5:1990, EN 25967:1989,ISO 5967:1981 BS 949-5:1990, EN 25967:1989,ISO 5967:1981. Screwing taps. Nomenclature and terminology
BS 3680-3M:1990 BS 3680-3M:1990. Measurement of liquid flow in open channels. Stream flow measurement. Guide to the methods of measuring high discharges in rivers
BS 5550-5.12.1:1990, ISO 1039:1988 BS 5550-5.12.1:1990, ISO 1039:1988. Cinematography. Common to more than one film gauge. Miscellaneous. Specification for the dimensions of cores for motion-picture a
BS 5950-8:1990 BS 5950-8:1990. Structural use of steelwork in building. Code of practice for fire resistant design
BS 6362:1990, ISO 7598:1988 BS 6362:1990, ISO 7598:1988. Specification for stainless steel tubes suitable for screwing in accordance with BS 21 'Pipe threads for tubes and fittings where pressure-tigh
BS 6840:Part 5:1990, IEC 60268-5:1989 BS 6840:Part 5:1990, IEC 60268-5:1989. Sound system equipment. Methods for specifying and measuring the characteristics of loudspeakers
BS 7197:1990 BS 7197:1990. Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV
BS 7293:1990, ISO 8524:1986 BS 7293:1990, ISO 8524:1986. Method of test for equipment for distributing granulated pesticides or herbicides
BS 7330-2:1990, ISO 9657:1989 BS 7330-2:1990, ISO 9657:1989. Pliers and nippers for electronics. Specification for general requirements
BS 903-A43:1990, ISO 1431-1:1989 BS 903-A43:1990, ISO 1431-1:1989. Physical testing of rubber. Method for determination of resistance to ozone cracking (static strain test)
BS 1742-2:1990, ISO 6734:1989 BS 1742-2:1990, ISO 6734:1989. Methods for chemical analysis of condensed milks. Determination of total solids content of sweetened condensed milks
BS 3762-3.1:1990, ISO 2271:1989 BS 3762-3.1:1990, ISO 2271:1989. Analysis of formulated detergents. Quantitative test methods. Method for determination of anionic-active matter content
BS 4821:1990 BS 4821:1990. Recommendations for the presentation of theses and dissertations
BS 5397:Part 8:1990, ISO 8471:1987 BS 5397:Part 8:1990, ISO 8471:1987. High-level data link control (HDLC) procedures. Specification for frame level address assignment
BS 5724-3.26:1990 BS 5724-3.26:1990. Medical electrical equipment. Particular requirements for performance. Method for declaring parameters for ultrasonic diagnostic equipment using test objects
BS 5880:1990, ISO 5637:1989 BS 5880:1990, ISO 5637:1989. Method for determination of water absorption of paper and board after immersion in water
BS 7325:1990, ISO 9895:1989 BS 7325:1990, ISO 9895:1989. Method for determination of the compressive strength of paper and board by the short span test
DD 185:1990 DD 185:1990. Method for determination of creep stiffness of bitumen aggregate mixtures subject to unconfined uniaxial loading
BS 1377-7:1990 BS 1377-7:1990. Methods of test for soils for civil engineering purposes. Shear strength tests (total stress)
BS 1742-3:1990, ISO 1737-1985 BS 1742-3:1990, ISO 1737-1985. Methods for chemical analysis of condensed milks. Determination of fat content
BS 1742-6:1990, ISO 2911:1976 BS 1742-6:1990, ISO 2911:1976. Methods for chemical analysis of condensed milks. Determination of sucrose content of sweetened condensed milk
BS 2574-3:1990 BS 2574-3:1990. Lower limb orthoses. Method for the determination of mechanical properties of metal knee joint and side member assemblies
BS 4062-2:1990, ISO 6403:1988 BS 4062-2:1990, ISO 6403:1988. Valves for hydraulic fluid power systems. Methods for determining performance
BS 4422-2:1990 BS 4422-2:1990. Glossary of terms associated with fire. Structural fire protection
BS 5084-5:1990, ISO/IEC TR 6371:1989 BS 5084-5:1990, ISO/IEC TR 6371:1989. Magnetic tape for instrumentation applications. Specification for interchange practices and test methods for unrecorded tape
BS 5397:Part 7:1990, ISO 7776:1986 BS 5397:Part 7:1990, ISO 7776:1986. High-level data link control (HDLC) procedures. Specification for X.25 LAPB-compatible DTE data link procedures
BS 6807:1990 BS 6807:1990. Methods of test for assessment of the ignitability of mattresses, divans and bed bases with primary and secondary sources of ignition
BS EN 28631:1993, ISO/IEC 8631:1989 BS EN 28631:1993, ISO/IEC 8631:1989. Information technology. Program constructs and conventions for their representation
BS 7215:1990 BS 7215:1990. Specification for separable insulated cable connector systems above 1 kV and up to 36 kV
BS 7249:1990, ISO 9067:1987 BS 7249:1990, ISO 9067:1987. Procedures for automatic fault isolation using test loops
BS 7342:1990, ISO 8498:1989 BS 7342:1990, ISO 8498:1989. Glossary of terms for defects in woven fabrics
BS 2M 47:1990 BS 2M 47:1990. Specification for retreading of cross ply tyres for aircraft
BS 161:1990, EN 60064:1989 BS 161:1990, EN 60064:1989. Specification for tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements
BS 427:1990 BS 427:1990. Method for Vickers hardness test and for verification of Vickers hardness testing machines
BS 812-105.2:1990 BS 812-105.2:1990. Testing aggregates. Methods for determination of particle shape. Elongation index of coarse aggregate
BS 4361-27:1990, ISO 9375:1989 BS 4361-27:1990, ISO 9375:1989. Woodworking machines. Nomenclature for disc sanding machines with spindle in fixed position
BS 4361-28:1990, ISO 9414:1989 BS 4361-28:1990, ISO 9414:1989. Woodworking machines. Nomenclature for curtain coating machines
BS 4361-29:1990, ISO 9415:1989 BS 4361-29:1990, ISO 9415:1989. Woodworking machines. Nomenclature for wide belt sanding machines
BS 4361-31:1990, ISO 9452:1989 BS 4361-31:1990, ISO 9452:1989. Woodworking machines. Nomenclature for crosswise veneer splicing machines
BS 4361-33:1990, ISO 9558:1989 BS 4361-33:1990, ISO 9558:1989. Woodworking machines. Nomenclature for veneer slicing machines
BS 4361-34:1990, ISO 9536:1989 BS 4361-34:1990, ISO 9536:1989. Woodworking machines. Nomenclature for mortising machines with oscillating tool action
BS 4585-16:1990, ISO 7541:1989 BS 4585-16:1990, ISO 7541:1989. Methods of test for spices and condiments. Determination of total natural colouring matter content of ground (powdered) paprika
BS 4781:1990 BS 4781:1990. Specification for pressure-sensitive adhesive plastics labels for permanent use
BS 4814:1990 BS 4814:1990. Specification for expansion vessels using an internal diaphragm, for sealed hot water heating systems
BS 5125:1990 BS 5125:1990. Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines
BS 5293-16:1990, ISO 6209:1988 BS 5293-16:1990, ISO 6209:1988. Sampling and testing carbon black for use in the rubber industry. Method for determination of solvent extractable material
BS 7313-1.1:1990, ISO 8549-1:1989 BS 7313-1.1:1990, ISO 8549-1:1989. Prosthetics and orthotics. Terminology. Glossary of general terms relating to external limb prostheses and external orthoses
BS 7313-1.2:1990, ISO 8549-2:1989 BS 7313-1.2:1990, ISO 8549-2:1989. Prosthetics and orthotics. Glossary of terms relating to external limb prostheses and wearers of external limb prostheses
BS 7313-1.3:1990, ISO 8549-3:1989 BS 7313-1.3:1990, ISO 8549-3:1989. Prosthetics and orthotics. Terminology. Glossary of terms relating to external orthoses BS 7313-2:1990, ISO 8548-1:1989 BS 7313-2:1990, ISO 8548-1:1989. Prosthetics and orthotics. Method of describing limb deficiencies present at birth
PD 6501-5:1990 PD 6501-5:1990. The preparation of British Standards for building and civil engineering. Guide to technical committees on the preparation of performance specifications in British Standa
BS 1741-2:1990, ISO 6731:1989 BS 1741-2:1990, ISO 6731:1989. Methods for chemical analysis of liquid milk and cream. Determination of total solids content of liquid milk, cream and unsweetened condens
BS 4361-20:1990, ISO 7983:1988 BS 4361-20:1990, ISO 7983:1988. Woodworking machines. Specification for single blade circular sawing machines with travelling table
BS 4361-22:1990, ISO 7988:1988 BS 4361-22:1990, ISO 7988:1988. Woodworking machines. Specification for double-end tenoning machines
BS 4361-23:1990, ISO 9264:1988 BS 4361-23:1990, ISO 9264:1988. Woodworking machines. Nomenclature for narrow belt sanding machines with sliding table or frame
BS 4361-24:1990, ISO 9265:1988 BS 4361-24:1990, ISO 9265:1988. Woodworking machines. Nomenclature for multi-spindle boring machines
BS 4361-25:1990, ISO 9266:1988 BS 4361-25:1990, ISO 9266:1988. Woodworking machines. Nomenclature for universal tool and cutter sharpeners
BS 4361-26:1990, ISO 9267:1988 BS 4361-26:1990, ISO 9267:1988. Woodworking machines. Nomenclature for bandsaw blade sharpening machines
BS 4422-3:1990, ISO 8421-3:1989 BS 4422-3:1990, ISO 8421-3:1989. Glossary of terms associated with fire. Fire detection and alarm
BS 5514-3:1990, ISO 3046-3:1989 BS 5514-3:1990, ISO 3046-3:1989. Reciprocating internal combustion engines: performance. Specification for test measurements
BS 1722:Part 12:1990 BS 1722:Part 12:1990. Fences. Specification for steel palisade fences
BS 1724:1990 BS 1724:1990. Specification for bronze welding by gas
BS 3142-2:1990 BS 3142-2:1990. Specification for manufactured solid smokeless fuels for household use. Cokes for domestic openable and closed appliances and open fires with fan-assisted primary air
BS 3970-4:1990 BS 3970-4:1990. Sterilizing and disinfecting equipment for medical products. Specification for transportable steam sterilizers for unwrapped instruments and utensils
BS 4361-30:1990, ISO 9451:1989 BS 4361-30:1990, ISO 9451:1989. Woodworking machines. Nomenclature for hand-loading veneering presses for flat surfaces
BS 4361-35:1990, ISO 9535:1989 BS 4361-35:1990, ISO 9535:1989. Woodworking machines. Nomenclature for machines for production of core stock from laths
BS 4361-36:1990, ISO 9566:1989 BS 4361-36:1990, ISO 9566:1989. Woodworking machines. Nomenclature for single-end tenoning machines with several spindles
BS 4361-37:1990, ISO 9567:1989 BS 4361-37:1990, ISO 9567:1989. Woodworking machines. Nomenclature for horizontal shredding machines for wood wool production, quadruple effect
BS 4361-38:1990, ISO 9615:1989 BS 4361-38:1990, ISO 9615:1989. Woodworking machines. Nomenclature for vertical shredding machines for wood wool production, with hydraulic clamping
BS 4361-40:1990, ISO 9617:1989 BS 4361-40:1990, ISO 9617:1989. Woodworking machines. Nomenclature for lifting tables and stages
BS 5212-1:1990 BS 5212-1:1990. Cold applied joint sealant systems for concrete pavements. Specification for joint sealants
BS 5212-3:1990 BS 5212-3:1990. Cold applied joint sealant systems for concrete pavements. Methods of test
BS 5268-7.5:1990 BS 5268-7.5:1990. Structural use of timber. Recommendations for the calculation basis for span tables. Domestic rafters
BS 5268-7.7:1990 BS 5268-7.7:1990. Structural use of timber. Recommendations for the calculation basis for span tables. Purlins supporting sheeting or decking
BS 6918:1990, ISO 8044:1989 BS 6918:1990, ISO 8044:1989. Glossary of terms for corrosion of metals and alloys
BS 7164:Part 25:1990, ISO 8054:1988 BS 7164:Part 25:1990, ISO 8054:1988. Chemical tests for raw and vulcanized rubber. Method for determination of sulphide sulphur content
BS 7167:1990 BS 7167:1990. Specification for Bordeaux connections
BS 6920:Part 1:1990 BS 6920:Part 1:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Spec
BS 6920:Part 2:Section 2.1:1990 BS 6920:Part 2:Section 2.1:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the qu
BS 6920-2.2.1:1990 BS 6920-2.2.1:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Method
BS 6920-2.2.2:1990 BS 6920-2.2.2:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Method
BS 6920-2.2.3:1990 BS 6920-2.2.3:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Method
BS 6920:Part 2:Section 2.3:1990 BS 6920:Part 2:Section 2.3:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the qu
BS 6920:Part 2:Section 2.5:1990 BS 6920:Part 2:Section 2.5:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the qu
BS 6920:Part 2:Section 2.6:1990 BS 6920:Part 2:Section 2.6:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the qu
BS 6920-3:1990 BS 6920-3:1990. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. High temperatu
BS 7194:1990 BS 7194:1990. Specification for direct-current and low-frequency electronic measuring instruments with a digital display
BS 7273-1:1990 BS 7273-1:1990. Code of practice for the operation of fire protection measures. Electrical actuation of gaseous total flooding extinguishing systems.
BS 7330-5:1990, ISO 9654:1989 BS 7330-5:1990, ISO 9654:1989. Pliers and nippers for electronics. Specification for dimensions of single-purpose cutting nippers
BS 7343:1990, ISO 8499:1990 BS 7343:1990, ISO 8499:1990. Glossary of terms for defects in knitted fabrics
BS 1706:1990 BS 1706:1990. Method for specifying electroplated coatings of zinc and cadmium on iron and steel
BS 3159:Part 1:1990 BS 3159:Part 1:1990. Woodworking saws for hand use. Specification for hand saws
BS 3970-1:1990 BS 3970-1:1990. Sterilizing and disinfecting equipment for medical products. Specification for general requirements
BS 4361-0:1990, ISO 7984:1988 BS 4361-0:1990, ISO 7984:1988. Woodworking machines. Classification of woodworking machines and auxiliary machines used for woodworking
BS 4361-32:1990, ISO 9537:1989 BS 4361-32:1990, ISO 9537:1989. Woodworking machines. Nomenclature for single-end edge bonding machines
BS 4361-39:1990, ISO 9616:1989 BS 4361-39:1990, ISO 9616:1989. Woodworking machines. Nomenclature for circular sawing machines for building sites
BS 4479-1:1990 BS 4479-1:1990. Design of articles that are to be coated. General recommendations
BS 4479-2:1990 BS 4479-2:1990. Design of articles that are to be coated. Recommendations for electroplated and autocatalytic coatings
BS 4479-3:1990 BS 4479-3:1990. Design of articles that are to be coated. Recommendations for conversion coatings
BS 4479-4:1990 BS 4479-4:1990. Design of articles that are to be coated. Recommendations for paint coatings and varnish coatings
BS 4479-5:1990 BS 4479-5:1990. Design of articles that are to be coated. Recommendations for anodic oxidation coatings
BS 4479:Part 6:1990 BS 4479:Part 6:1990. Design of articles that are to be coated. Recommendations for hot-dip metal coatings
BS 4479-7:1990 BS 4479-7:1990. Design of articles that are to be coated. Recommendations for thermally sprayed coatings
BS 4479-9:1990 BS 4479-9:1990. Design of articles that are to be coated. Recommendations for low pressure and vacuum deposited coatings
BS 7104:1990, ISO 9362:1987 BS 7104:1990, ISO 9362:1987. Procedure for allocating a Bank Identifier Code (BIC)
BS 7164-27.2:1990, ISO 1657:1986 BS 7164-27.2:1990, ISO 1657:1986. Chemical tests for raw and vulcanized rubber. Methods for determination of iron content. Photometric method
BS 7205:1990, ISO 8732:1988 BS 7205:1990, ISO 8732:1988. Procedures for key management to achieve security for financial institutions engaged in financial transactions (wholesale)
BS 7267:1990, ISO/IEC TR 10029:1989 BS 7267:1990, ISO/IEC TR 10029:1989. Open systems interconnection: guide to operation of an X.25 interworking unit
BS 7281:1990 BS 7281:1990. Specification for polyethylene pipes for the supply of gaseous fuels
BS 7317-1:1990 BS 7317-1:1990. Methods for analysis of high purity copper cathode Cu-CATH-1. Method for determination of cadmium, manganese and silver (screening procedure for chromium, cobalt, iron,
BS 7317-2:1990 BS 7317-2:1990. Methods for analysis of high purity copper cathode Cu-CATH-1. Method for determination of chromium, cobalt, iron, nickel and zinc by discrete volume nebulization atomic
BS 7317-3:1990 BS 7317-3:1990. Methods for analysis of high purity copper cathode Cu-CATH-1. Method for determination of antimony, arsenic, bismuth, selenium, tellurium and tin by hydride generation a
BS 7317-4:1990 BS 7317-4:1990. Methods for analysis of high purity copper cathode Cu-CATH-1. Method for determination of antimony, arsenic, bismuth, lead, selenium, tellurium and tin by electrothermal
BS 7317-5:1990 BS 7317-5:1990. Methods for analysis of high purity copper cathode Cu-CATH-1. Method for determination of sulphur by hydrogen sulphide evolution and spectrophotometry
BS 7317-6:1990 BS 7317-6:1990. Methods for analysis of high purity copper cathode Cu-CATH-1. Method for determination of phosphorus and silicon by spectrophotometry
BS 7317-7:1990 BS 7317-7:1990. Methods for analysis of high purity copper cathode Cu-CATH-1. Method for determination of lead by lanthanum hydroxide separation and atomic absorption spectrophotometry
BS AU 165a:1990 BS AU 165a:1990. Specification for performance requirements for original equipment jacks for passenger cars and light vans
BS 3970:Part 3:1990 BS 3970:Part 3:1990. Sterilizing and disinfecting equipment for medical products. Specification for steam sterilizers for wrapped goods and porous loads
BS 1134-2:1990 BS 1134-2:1990. Assessment of surface texture. Guidance and general information
BS 1902:Part 4:Section 4.10:1990, ISO 3187:1989 BS 1902:Part 4:Section 4.10:1990, ISO 3187:1989. Methods of testing refractory materials. Properties measured under an applied stress. Determination of
BS 4193:Part 6:1990, ISO 5608:1989 BS 4193:Part 6:1990, ISO 5608:1989. Hardmetal insert tooling. Specification for the designation of turning and copying tool holders and cartridges for indexable (thr
BS 4193:Part 7:1990, ISO 5610:1989 BS 4193:Part 7:1990, ISO 5610:1989. Hardmetal insert tooling. Specification for dimensions for single point turning and copying tool holders for indexable inserts
BS 4193:Part 8:1990, ISO 5611:1989 BS 4193:Part 8:1990, ISO 5611:1989. Hardmetal insert tooling. Specification for dimensions for type A cartridges for indexable (throwaway) inserts
BS 4193:Part 18:1990, ISO 5609:1989 BS 4193:Part 18:1990, ISO 5609:1989. Hardmetal insert tooling. Specification for dimensions of boring bars for indexable inserts
BS 5817-17:1990, IEC 60574-17:1989 BS 5817-17:1990, IEC 60574-17:1989. Specification for audiovisual, video and television equipment and systems. Methods for specifying and measuring the performance c
BS 6042:1990, EN 28891:1991,ISO 8891:1990 BS 6042:1990, EN 28891:1991,ISO 8891:1990. Specification for dental semi-precious metal casting alloys
BS 7164:Part 14:1990, ISO 1408:1987 BS 7164:Part 14:1990, ISO 1408:1987. Chemical tests for raw and vulcanized rubber. Methods for determination of carbon black content
BS 7164:Part 26:Section 26.2:1990, ISO 7780:1987 BS 7164:Part 26:Section 26.2:1990, ISO 7780:1987. Chemical tests for raw and vulcanized rubber. Methods for determination of manganese content. Sodium
BS 7164:Part 28:Section 28.1:1990, ISO 6101-3:1988 BS 7164:Part 28:Section 28.1:1990, ISO 6101-3:1988. Chemical tests for raw and vulcanized rubber. Methods for determination of copper content. Atomic
BS 7164:Part 28:Section 28.2:1990, ISO 8053:1986 BS 7164:Part 28:Section 28.2:1990, ISO 8053:1986. Chemical tests for raw and vulcanized rubber. Methods for determination of copper content. Photometri
BS 7238:1990, IEC 60824:1988 BS 7238:1990, IEC 60824:1988. Glossary for terminology related to microprocessors
BS 1722:Part 10:1990 BS 1722:Part 10:1990. Fences. Specification for anti-intruder fences in chain link and welded mesh
BS 3122-2:1990, ISO 9309:1989 BS 3122-2:1990, ISO 9309:1989. Refrigerant compressors. Method for presentation of performance data
BS EN 20105-A02:1994 Colour Scale BS EN 20105-A02:1994 Colour Scale. Textiles. Tests for colour fastness. Grey scale for assessing change in colour (including half-steps)
BS 4258-13:1990 BS 4258-13:1990. Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Determination of soluble sulphate content (potentiometric method)
BS 4422-9:1990 BS 4422-9:1990. Glossary of terms associated with fire. Marine terms
BS 4584:Part 102:Section 102.6:1990, IEC 60249-2-6:1985 BS 4584:Part 102:Section 102.6:1990, IEC 60249-2-6:1985. Metal-clad base materials for printed wiring boards. Copper-clad base materials. Specif
BS 5724:Part 2:Section 2.12:1990, IEC 60601-2-12:1988 BS 5724:Part 2:Section 2.12:1990, IEC 60601-2-12:1988. Medical electrical equipment. Particular requirements for safety. Specification for lung ve
BS 5724:Part 2:Section 2.13:1990, IEC 60601-2-13:1989 BS 5724:Part 2:Section 2.13:1990, IEC 60601-2-13:1989. Medical electrical equipment. Particular requirements for safety. Specification for anaesth
BS 6087:1990 BS 6087:1990. Specification for flexible joints for grey or ductile cast iron drainpipes and fittings (BS 437) and for discharge and ventilating pipes and fittings (BS 416)
BS 6993-2:1990 BS 6993-2:1990. Thermal and radiometric properties of glazing. Method for direct measurement of U-value (thermal transmittance)
BS 7164:Part 26:Section 26.1:1990, ISO 6101-4:1988 BS 7164:Part 26:Section 26.1:1990, ISO 6101-4:1988. Chemical tests for raw and vulcanized rubber. Methods for determination of manganese content. Ato
BS 7247:1990, IEC 60847:1989 BS 7247:1990, IEC 60847:1989. Guide for characteristics of local area networks (LAN)
BS EN 28485:1993, ISO 8485:1989 BS EN 28485:1993, ISO 8485:1989. Specification for programming language: APL
BS 812-110:1990 BS 812-110:1990. Testing aggregates. Methods for determination of aggregate crushing value (ACV)
BS 812-111:1990 BS 812-111:1990. Testing aggregates. Methods for determination of ten per cent fines value (TFV)
BS 812-112:1990 BS 812-112:1990. Testing aggregates. Method for determination of aggregate impact value (AIV)
BS 812-113:1990 BS 812-113:1990. Testing aggregates. Method for determination of aggregate abrasion value (AAV)
BS 4533-101:1990, EN 60598-1:1989 BS 4533-101:1990, EN 60598-1:1989. Luminaires. Specification for general requirements and tests
BS 5422:1990 BS 5422:1990. Method for specifying thermal insulating materials on pipes, ductwork and equipment (in the temperature range -40°C to +700°C)
BS 5563:1990, ISO 4659:1989 BS 5563:1990, ISO 4659:1989. Method for evaluation of styrene-butadiene rubber (SBR) masterbatches with carbon black or carbon black and oil
BS EN ISO 7539-2:1995 BS EN ISO 7539-2:1995. Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of bent-beam specimens
BS EN ISO 7539-3:1995, U BS EN ISO 7539-3:1995, U. Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of U-bend specimens
BS EN ISO 7539-5:1995 BS EN ISO 7539-5:1995. Corrosion of metals and alloys. Stress corrosion testing. Method for the preparation and use of C-ring specimens
BS EN ISO 7539-7:1995 BS EN ISO 7539-7:1995. Corrosion of metals and alloys. Stress corrosion testing. Slow strain rate testing
BS 7322:1990, ISO 8012:1988 BS 7322:1990, ISO 8012:1988. Specification for design and construction of reciprocating type compressors for the process industry
BS 7333:1990 BS 7333:1990. Specification for slewing jib cranes
BS 684-1.15:1990, ISO 3656:1989 BS 684-1.15:1990, ISO 3656:1989. Methods of analysis of fats and fatty oils. Physical methods. Determination of ultraviolet absorbance
BS 3122-1:1990, ISO 917:1989 BS 3122-1:1990, ISO 917:1989. Refrigerant compressors. Methods of test for performance
BS 5459-2:1990 BS 5459-2:1990. Specification for performance requirements and tests for office furniture. Office seating
BS 6037:1990 BS 6037:1990. Code of practice for permanently installed suspended access equipment
BS 6829-1.5:1990 BS 6829-1.5:1990. Analysis of surface active agents (raw materials). General methods. Methods for determination of water content
BS 7309:1990, EN 142:1989 BS 7309:1990, EN 142:1989. Specification for mouthpiece assemblies for respiratory protective devices
BS 7347:1990, ISO 8568:1989 BS 7347:1990, ISO 8568:1989. Guide for characteristics and performance of mechanical shock testing machines
BS 812-100:1990 BS 812-100:1990. Testing aggregates. General requirements for apparatus and calibration
BS 812-109:1990 BS 812-109:1990. Testing aggregates. Methods for determination of moisture content
BS 142-1.4.1:1990, IEC 60255-22-1:1988 BS 142-1.4.1:1990, IEC 60255-22-1:1988. Electrical protection relays. Information and requirements for all protection relays. Specification for electrical distur
BS 903-A4:1990, ISO 7743:1989 BS 903-A4:1990, ISO 7743:1989. Physical testing of rubber. Determination of compression stress-strain properties
BS 1635:1990 BS 1635:1990. Recommendations for graphic symbols and abbreviations for fire protection drawings
BS 6324-5:1990, ISO TR 9586:1988 BS 6324-5:1990, ISO TR 9586:1988. Terms relating to surgical implants. Guidance on the usage of the terms 'valgus' and 'varus' in orthopaedic surgery
BS 6444-1:1990, ISO 5840:1989 BS 6444-1:1990, ISO 5840:1989. Cardiovascular implants. Methods of test for heart valve substitutes and requirements for their packaging and labelling
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
