BIS Standards Catalogue
BS 6236:Part 2:1988, IEC 60371-2:1987 BS 6236:Part 2:1988, IEC 60371-2:1987. Electrical insulating materials based on mica. Methods of test
BS 6920:Part 2:Section 2.4:1988 BS 6920:Part 2:Section 2.4:1988. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the qu
BS 3700:1988 BS 3700:1988. Recommendations for preparing indexes to books, periodicals and other documents
BS 4656-22:1988, ISO 3655-1986 BS 4656-22:1988, ISO 3655-1986. Accuracy of machine tools and methods of test. Specification for vertical boring and turning lathes, single and double column types
BS 5911-100:1988 BS 5911-100:1988. Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and reinforced pipes and fittings with flexible joints
BS 5911:Part 101:1988 BS 5911:Part 101:1988. Precast concrete pipes, fittings and ancillary products. Specification for glass composite concrete (GCC) pipes and fittings with flexible joints
BS 6968:1988, ISO 3056:1986 BS 6968:1988, ISO 3056:1986. Guide for use and maintenance of non-calibrated round steel lifting chain and chain slings
BS 8211-1:1988 BS 8211-1:1988. Energy efficiency in housing. Code of practice for energy efficient refurbishment of housing
BS 4737-3.0:1988 BS 4737-3.0:1988. Intruder alarm systems. Specifications for components. General requirements
BS 812-117:1988 BS 812-117:1988. Testing aggregates. Method for determination of water-soluble chloride salts
BS 5514:Part 7:1988, ISO 3046-7:1987 BS 5514:Part 7:1988, ISO 3046-7:1987. Reciprocating internal combustion engines: performance. Specification for codes for engine power
BS CECC 42201:1988 BS CECC 42201:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Surge suppression varistors
BS CECC 90300:1988 BS CECC 90300:1988. Harmonized system of quality assessment for electronic components. Sectional specification: interface monolithic integrated circuits
BS 1490:1988 BS 1490:1988. Specification for aluminium and aluminium alloy ingots and castings for general engineering purposes
BS AU 209:Part 5a:1988 BS AU 209:Part 5a:1988. Vehicle security. Specification for central power locking systems for passenger cars and car derived vehicles
BS AU 209:Part 6:1988 BS AU 209:Part 6:1988. Vehicle security. Specification for dead locking systems for passenger cars and car derived vehicles
BS 1000:Auxiliaries I(e):Part 2:1988 BS 1000:Auxiliaries I(e):Part 2:1988. Universal Decimal Classification. English full edition. Auxiliary table I(e). Common auxiliaries of place (3/4) Ancient world
BS 4449:1988 BS 4449:1988. Specification for carbon steel bars for the reinforcement of concrete
BS 6100-1.3.5:1988 BS 6100-1.3.5:1988. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works. Doors, windows and openings
BS 7008-2:1988 BS 7008-2:1988. Acquisition and presentation of comparable data for basic properties of plastics. Method for multipoint data
DD 176:1988 DD 176:1988. Data logging and remote monitoring equipment for lifts, escalators and passenger conveyors
BS CECC 40301:1988 BS CECC 40301:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed precision resistors
BS EN 120002:1993 BS EN 120002:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: infrared emitting diodes, infrared emitting diode
BS EN 120004:1993 BS EN 120004:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Ambient rated photocouplers with phototransistor o
BS 5377-1:1988, ISO 2267-1986 BS 5377-1:1988, ISO 2267-1986. Assessment of laundering effects by means of a cotton control cloth. Specification for preparation and use of the cotton control cloth
BS 6049-4:1988, ISO 1575:1987 BS 6049-4:1988, ISO 1575:1987. Methods of test for tea. Determination of total ash
BS 6049-6:1988, ISO 1577:1987 BS 6049-6:1988, ISO 1577:1987. Methods of test for tea. Determination of acid-insoluble ash
BS 6527:1988, EN 55022:1987 BS 6527:1988, EN 55022:1987. Specification for limits and methods of measurement of radio interference characteristics of information technology equipment
BS 6854-2:1988 BS 6854-2:1988. Code of practice for safeguarding woodworking machines. Circular sawing machines (sawing machines with rotating tools)
BS 6934:1988, EN 26876:1989,ISO 6876:1986 BS 6934:1988, EN 26876:1989,ISO 6876:1986. Specification for dental root canal sealing materials
BS CECC 31801:1988 BS CECC 31801:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed polypropylene film dielectric metal foil d
BS 2782-7:Method 721A:1988 BS 2782-7:Method 721A:1988. Methods of testing plastics. Rheological properties. Determination of resin flow from resin impregnated glass fabric
BS 4267-1:1988 BS 4267-1:1988. Ammonium nitrate. Method for determination of ammoniacal nitrogen content
BS 4267-2:1988 BS 4267-2:1988. Ammonium nitrate. Method for determination of total nitrogen content
BS 6975:1988 BS 6975:1988. Specification for non-metallic tensional strapping
PD 6520:1988 PD 6520:1988. Guide to fire test methods for building materials and elements of construction
BS 5381:Part 2:1988, ISO 2971:1987 BS 5381:Part 2:1988, ISO 2971:1987. Methods for determination of physical properties of tobacco and tobacco products. Nominal diameter of cigarettes and filters (pne
BS 6219:1988, ISO 5223-1983 BS 6219:1988, ISO 5223-1983. Specification for test sieves for cereals
BS 6914-5:1988, ISO 7136-1986 BS 6914-5:1988, ISO 7136-1986. Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Glossary for pipelayers
BS 6978-1:1988, ISO 7256-1:1984 BS 6978-1:1988, ISO 7256-1:1984. Seed drills. Methods of test for single seed drills
PP 7318:1988 PP 7318:1988. Materials testing
BS EN ISO 7539-1:1995 BS EN ISO 7539-1:1995. Corrosion of metals and alloys. Stress corrosion testing. General guidance on testing procedures
BS 5551:Part 3:Section 3.5:1988, ISO 8397:1988 BS 5551:Part 3:Section 3.5:1988, ISO 8397:1988. Fertilizers. Physical properties. Method for determination of particle size distribution by test sieving
BS 5394:1988, EN 55015:1987 BS 5394:1988, EN 55015:1987. Specification for limits and methods of measurement of radio interference characteristics of fluorescent lamps and luminaires
BS 5724:Part 2:Section 2.9:1988, IEC 60601-2-9:1987 BS 5724:Part 2:Section 2.9:1988, IEC 60601-2-9:1987. Medical electrical equipment. Particular requirements for safety. Specification for dosimeters
BS 6829-1.2:1988, ISO 4314-1977 BS 6829-1.2:1988, ISO 4314-1977. Analysis of surface active agents (raw materials). General methods. Method for determination of free alkalinity or free acidity
BS 6829-1.3:1988, ISO 4315-1977 BS 6829-1.3:1988, ISO 4315-1977. Analysis of surface active agents (raw materials). General methods. Method for determination of alkalinity
BS 6829-4.6:1988, ISO 4326-1980 BS 6829-4.6:1988, ISO 4326-1980. Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of hydroxyl value
BS 4651-1:1988 BS 4651-1:1988. Ammonia solution. Method for determination of density at 20°C
BS 4651-4:1988 BS 4651-4:1988. Ammonia solution. Method for determination of residue after heating at 850°C
BS 4651-5:1988 BS 4651-5:1988. Ammonia solution. Method for determination of iron content
BS 4651-6:1988 BS 4651-6:1988. Ammonia solution. Methods for determination of chloride content
BS 4651-7:1988 BS 4651-7:1988. Ammonia solution. Method for determination of carbon dioxide content
BS 4742-6:1988 BS 4742-6:1988. Hydraulic equipment for agricultural machinery. Specification for dimensions and location of agricultural tractor hydraulic return to sump porting
BS 5531:1988 BS 5531:1988. Code of practice for safety in erecting structural frames
BS 6915:1988 BS 6915:1988. Specification for design and construction of fully supported lead sheet roof and wall coverings
BS 6995:1988, ISO 2322-1985 BS 6995:1988, ISO 2322-1985. Method for evaluation of vulcanization characteristics of styrene-butadiene rubber (SBR, YSBR) (emulsion and solution-polymerized types)
BS 7018:1988 BS 7018:1988. Guide to use of electrical insulating materials containing asbestos
BS 9925:Part 02.01 and Part 02.02:1988, IEC 60723-3-1:1985,QC 250201:1985,QC 250202:1985 BS 9925:Part 02.01 and Part 02.02:1988, IEC 60723-3-1:1985,QC 250201:1985,QC 250202:1985. Harmonized system of
BS 9925-03.01:1988, IEC 60723-4-1:1987,QC 250301:1987 BS 9925-03.01:1988, IEC 60723-4-1:1987,QC 250301:1987. Harmonized system of quality assessment for electronic components. Inductor and transformer
BS EN 120006:1993 BS EN 120006:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: pin-photodiodes for fibre optic applications
BS 6885:1988 BS 6885:1988. Specification for miniature cartridge fuse links for use on printed wiring boards
BS 4472:1988 BS 4472:1988. Specification for protective skull caps for jockeys
BS 6923:1988 BS 6923:1988. Method for calculation of small colour differences
BS 812-118:1988 BS 812-118:1988. Testing aggregates. Methods for determination of sulphate content
BS 4289-8:1988, ISO 7700-2:1987 BS 4289-8:1988, ISO 7700-2:1987. Methods for analysis of oilseeds. Check of the calibration of moisture meters
BS 4361-16:1988, ISO 7950-1985 BS 4361-16:1988, ISO 7950-1985. Woodworking machines. Specification for single chain mortising machines
BS 4737-5.2:1988 BS 4737-5.2:1988. Intruder alarm systems. Terms and symbols. Recommendations for symbols for diagrams
BS 5536:1988 BS 5536:1988. Recommendations for preparation of technical drawings for microfilming
BS 6043-1.7:1988 BS 6043-1.7:1988. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of apparent density (buoyancy method)
BS 6349-3:1988 BS 6349-3:1988. Maritime structures. Design of dry docks, locks, slipways and shipbuilding berths, shiplifts and dock and lock gates
BS 6361:1988 BS 6361:1988. Specification for three-pin plug connectors for electrically controlled fluid power equipment
BS 6986-1:1988, ISO 7516-1984 BS 6986-1:1988, ISO 7516-1984. Analysis of instant tea. Methods of sampling
BS 6986-2:1988, ISO 6770-1982 BS 6986-2:1988, ISO 6770-1982. Analysis of instant tea. Methods for determination of free-flow and compacted bulk densities
BS 9121:1988 BS 9121:1988. Blank detail specification for radio interference suppression filters of assessed quality. Basic and full assessment levels
BS 6258:1988 BS 6258:1988. Specification for hollow steel bars for machining
BS 5173:Part 102:Section 102.7:1988, ISO 8032:1987 BS 5173:Part 102:Section 102.7:1988, ISO 8032:1987. Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Pres
BS 6981:1988 BS 6981:1988. Method for determination of acid content of wool
BS 1881-204:1988 BS 1881-204:1988. Testing concrete. Recommendations on the use of electromagnetic covermeters
BS CECC 40103:1988 BS CECC 40103:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed low power non-wirewound resistors. Assessm
BS 4656-28:1988 BS 4656-28:1988. Accuracy of machine tools and methods of test. Specification for numerically controlled turning machines up to and including 1500 mm turning diameter
BS 6693-3:1988 BS 6693-3:1988. Diffusible hydrogen. Primary method for the determination of diffusible hydrogen in manual metal-arc ferritic steel weld metal
BS 6693-4:1988 BS 6693-4:1988. Diffusible hydrogen. Primary method for the determination of diffusible hydrogen in submerged-arc ferritic steel weld metal
BS 6693-5:1988 BS 6693-5:1988. Diffusible hydrogen. Primary method for the determination of diffusible hydrogen in MIG, MAG, TIG or cored electrode ferritic steel weld metal
BS 4448:1988 BS 4448:1988. Specification for school exercise books and papers
BS AU 225:1988, ISO 7803:1987 BS AU 225:1988, ISO 7803:1987. Specification for dimensions of steering ball joints for commercial road vehicles
BS AU 226:1988, ISO 7648:1987 BS AU 226:1988, ISO 7648:1987. Specification for nominal dimensions and tolerances of flywheel housings for reciprocating internal combustion engines
BS AU 227:1988, ISO 7467:1987 BS AU 227:1988, ISO 7467:1987. Specification for dimensions of cylindrical shaft ends and hubs for alternators for commercial vehicles and buses
BS 5655-2:1988, EN 81-2:1987 BS 5655-2:1988, EN 81-2:1987. Lifts and service lifts. Safety rules for the construction and installation of hydraulic lifts
BS 6100-1.5.3:1988 BS 6100-1.5.3:1988. Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipment. Setting out and measurement
BS 6965-1:1988 BS 6965-1:1988. Creasing properties of carton board. Method for determination of crease recovery (spring back) of 90° fold
BS 3568:1988 BS 3568:1988. Method for determination of solubility of wool in alkali
BS 6100-1.5.6:1988 BS 6100-1.5.6:1988. Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipment. Documentation excluding drawings
BS CECC 31800:1988 BS CECC 31800:1988. Harmonized system of quality assessment for electronic components. Sectional specification: fixed polypropylene film dielectric metal foil d.c. capacitors
BS CECC 42200:1988 BS CECC 42200:1988. Harmonized system of quality assessment for electronic components. Sectional specification: surge suppression varistors
BS 1501:Part 2:1988 BS 1501:Part 2:1988. Steels for pressure purposes. Specification for alloy steels: plates
BS 5514:Part 2:1988, ISO 3046-2:1987 BS 5514:Part 2:1988, ISO 3046-2:1987. Reciprocating internal combustion engines. Performance. Test methods
BS 6579-1:1988 BS 6579-1:1988. Safety fences and barriers for highways. Specification for components for tensioned corrugated beam safety fence on Z posts
BS 6579-3:1988 BS 6579-3:1988. Safety fences and barriers for highways. Specification for components for tensioned rectangular hollow section beam (100 mm x 100 mm) safety fence
BS 6946:1988 BS 6946:1988. Specification for metal channel cable support systems for electrical installations
BS 879-2:1988 BS 879-2:1988. Water well casing. Specification for thermoplastics tubes for casing and slotted casing
BS 6100-1.5.7:1988 BS 6100-1.5.7:1988. Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipment. Drawings
BS 7003:1988, IEC 60817:1984 BS 7003:1988, IEC 60817:1984. Specification for spring-operated impact-test apparatus and its calibration
BS G 241:1988 BS G 241:1988. Specification for fire proof electric cables for engine fire zone and airframe use
BS 4971-1:1988 BS 4971-1:1988. Recommendations for repair and allied processes for the conservation of documents. Recommendations for treatment of sheets, membranes and seals
BS 6907-1:1988 BS 6907-1:1988. Electrical installations for open-cast mines and quarries. Glossary
BS 6907-2:1988 BS 6907-2:1988. Electrical installations for open-cast mines and quarries. General recommendations for protection against direct contact and electric shock
BS 6907-3:1988 BS 6907-3:1988. Electrical installations for open-cast mines and quarries. Recommendations for equipment and ancillaries
BS 6907-4:1988 BS 6907-4:1988. Electrical installations for open-cast mines and quarries. Recommendations for winning, stacking and processing machinery, pumps and low signal level and communications
BS 6907-5:1988 BS 6907-5:1988. Electrical installations for open-cast mines and quarries. Recommendations for operation
BS 6731:1988, EN 111:1982 BS 6731:1988, EN 111:1982. Specification for wall hung hand rinse basins. Connecting dimensions
BS 903-A40:1988, ISO 5600:1986 BS 903-A40:1988, ISO 5600:1986. Physical testing of rubber. Determination of adhesion to rigid materials using conical shaped parts
BS 1041-7:1988 BS 1041-7:1988. Temperature measurement. Guide to selection and use of temperature/time indicators
BS 2782-5:Method 540C:1988 BS 2782-5:Method 540C:1988. Methods of testing plastics. Optical and colour properties, weathering. Determination of ultraviolet radiation intensity using polysulphone film
BS 6944:1988 BS 6944:1988. Specification for flash welding of butt joints in ferrous metals (excluding pressure piping applications)
BS 874-2.2:1988 BS 874-2.2:1988. Methods for determining thermal insulating properties. Tests for thermal conductivity and related properties. Unguarded hot-plate method
BS 4485-2:1988 BS 4485-2:1988. Water cooling towers. Methods for performance testing
BS 4485-3:1988 BS 4485-3:1988. Water cooling towers. Code of practice for thermal and functional design
BS 4656:Part 6:1988 BS 4656:Part 6:1988. Accuracy of machine tools and methods of test. Specification for surface grinding machines, vertical spindle, reciprocating table type
BS 4656-7:1988 BS 4656-7:1988. Accuracy of machine tools and methods of test. Specification for surface grinding machines, horizontal spindle, reciprocating table type
BS 6943:1988 BS 6943:1988. Classification of shapes of electronic components for placement on printed wiring boards
BS 6958-1:1988, EN 28860-1:1989,ISO 8860-1:1987 BS 6958-1:1988, EN 28860-1:1989,ISO 8860-1:1987. Guide to construction and use of 90 mm (3.5 in) flexible disk cartridges for data interchange, using mo
BS 6958-2:1988, EN 28860-2:1989,ISO 8860-2:1987 BS 6958-2:1988, EN 28860-2:1989,ISO 8860-2:1987. Guide to construction and use of 90 mm (3.5 in) flexible disk cartridges for data interchange, using mo
BS 7007-1:1988, ISO 2422:1986 BS 7007-1:1988, ISO 2422:1986. Abrasive products. Specification for dimensions and designation of truncated cone abrasive sleeves
BS 7007-3:1988, ISO 8366:1987 BS 7007-3:1988, ISO 8366:1987. Abrasive products. Specification for dimensional tolerances on non-standard coated abrasive products
BS 4656:Part 21:1988 BS 4656:Part 21:1988. Accuracy of machine tools and methods of test. Specification for boring and milling machines, horizontal spindle table type and rotary table type
BS 7042:1988 BS 7042:1988. Specification for high security intruder alarm systems in buildings
BS 4285-3.5:1988 BS 4285-3.5:1988. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumeration of proteolytic microorgani
BS 4285-3.14:1988 BS 4285-3.14:1988. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumeration of mesophilic microorgan
BS 799-7:1988, EN 225:1987 BS 799-7:1988, EN 225:1987. Oil burning equipment. Specification for dimensions of atomizing oil burner pumps with rotating shaft and external drive
BS 799-8:1988, EN 226:1987 BS 799-8:1988, EN 226:1987. Oil burning equipment. Specification for connecting dimensions between atomizing oil burners and heat generators
BS 1870:Part 1:1988 BS 1870:Part 1:1988. Safety footwear. Specification for safety footwear other than all-rubber and all-plastics moulded types
BS 3224-1:1988 BS 3224-1:1988. Lighting fittings for civil land aerodromes. Specification for lighting units for use in precision approach path indicator systems
BS 3224-4:1988 BS 3224-4:1988. Lighting fittings for civil land aerodromes. Specification for elevated lighting units
BS 3224-5:1988 BS 3224-5:1988. Lighting fittings for civil land aerodromes. Specification for inset lighting units
BS 3224-6:1988 BS 3224-6:1988. Lighting fittings for civil land aerodromes. Specification for obstacle lighting units
BS 5441:1988 BS 5441:1988. Methods of test for knitted fabrics
BS 5551-4.3.4:1988, ISO 5310-1986 BS 5551-4.3.4:1988, ISO 5310-1986. Fertilizers. Chemical analysis. Determination of potassium. Method for determination of potassium content (titrimetric method)
BS 5728-5:1988, ISO 7858-2:1987 BS 5728-5:1988, ISO 7858-2:1987. Measurement of flow of cold potable water in closed conduits. Specification for installation requirements for combination meters
BS 1660-2:1988, ISO 238:1974 BS 1660-2:1988, ISO 238:1974. Machine tapers. Specification for reduction sleeves and extension sockets for tools with Morse taper shanks
BS 1660-3:1988 BS 1660-3:1988. Machine tapers. Specification for turret sockets and reduction sleeves with tapped ends for tools with Morse taper shanks
BS 1660:Part 5:1988 BS 1660:Part 5:1988. Machine tapers. Specification for adaptors with 7/24 internal and external tapers
BS 1660-6:1988, ISO 4202:1978 BS 1660-6:1988, ISO 4202:1978. Machine tapers. Specification for adaptors with external 7/24 tapers for tools with Morse taper shanks
BS 1660-7:1988 BS 1660-7:1988. Machine tapers. Specification for extension adaptors with external 7/24 tapers for tools with Morse taper shanks
BS 1660-9:1988, ISO 1080:1975 BS 1660-9:1988, ISO 1080:1975. Machine tapers. Specification for cotter slots
BS 1660-10:1988, ISO 239:1974 BS 1660-10:1988, ISO 239:1974. Machine tapers. Specification for drill chuck tapers (Jacob and short Morse)
BS 6888:1988 BS 6888:1988. Methods for calibration of bonded electrical resistance strain gauges
BS 7009:1988 BS 7009:1988. Guide to application of real-time radiography to weld inspection
BS 7069:1988 BS 7069:1988. Specification for cookware
BS 5551-2.7:1988 BS 5551-2.7:1988. Fertilizers. Sampling. Recommendations for minimum mass of increment of a solid fertilizer to be taken to be representative of the total sampling unit
BS 4575-3:1988 BS 4575-3:1988. Fluid power transmission and control systems. Code of practice for the technical specification, design, construction, commissioning and safe application of hydraulic and
BS 4732:1988, ISO 1001-1986 BS 4732:1988, ISO 1001-1986. Specification for file structure and labelling of magnetic tape for information interchange
BS 6542-2:1988, EN 29293:1989,ISO 9293:1987 BS 6542-2:1988, EN 29293:1989,ISO 9293:1987. File structure and labelling of flexible disk cartridges for information interchange. Specification for variabl
BS 970-2:1988 BS 970-2:1988. Specification for wrought steels for mechanical and allied engineering purposes. Requirements for steels for the manufacture of hot formed springs
BS 6068-2.34:1988 BS 6068-2.34:1988. Water quality. Physical, chemical and biochemical methods. Method for the determination of the chemical oxygen demand
PD 6522:1988 PD 6522:1988. Terms relevant to the feather industry for fillings for bedding, upholstery and other domestic articles
BS 5600-3.2:1988, ISO 2738-1987 BS 5600-3.2:1988, ISO 2738-1987. Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals. Determinat
BS 5600-3.7:1988, ISO 2740-1986 BS 5600-3.7:1988, ISO 2740-1986. Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals. Tensile te
BS 5600-5.1:1988, ISO 5755-1:1987 BS 5600-5.1:1988, ISO 5755-1:1987. Powder metallurgical materials and products. Material specifications for sintered metal products, excluding hardmetals. Materials,
BS 5600-5.2:1988, ISO 5755-2:1987 BS 5600-5.2:1988, ISO 5755-2:1987. Powder metallurgical materials and products. Material specifications for sintered metal products, excluding hardmetals. Sintered ir
BS 5600-5.3:1988, ISO 5755-3:1987 BS 5600-5.3:1988, ISO 5755-3:1987. Powder metallurgical materials and products. Material specifications for sintered metal products, excluding hardmetals. Sintered al
BS 2837:1988 BS 2837:1988. Specification for steel links and strap assemblies for lifting attachments for packing cases
BS EN 60269-1:1994, BS 88-1:1988,IEC 60269-1:1986 BS EN 60269-1:1994, BS 88-1:1988,IEC 60269-1:1986. Low-voltage fuses. General requirements
BS 88-2.2:1988 BS 88-2.2:1988. Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification for fuses for use by authorized persons (mainly for industrial application). A
BS 88-5:1988 BS 88-5:1988. Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification of supplementary requirements for fuse-links for use in a.c. electricity supply ne
BS 88-6:1988 BS 88-6:1988. Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification of supplementary requirements for fuses of compact dimensions for use in 240/415 V
BS 5239:1988 BS 5239:1988. Specification for babies' dummies
BS EN 20090-3:1993, ISO 90-3:1986 BS EN 20090-3:1993, ISO 90-3:1986. Light gauge metal containers. Definitions and determination methods for dimensions and capacities. Aerosol cans
BS EN 20090-1:1993, ISO 90-1:1986 BS EN 20090-1:1993, ISO 90-1:1986. Light gauge metal containers. Definitions and determination methods for dimensions and capacities. Open-top cans
BS EN 20090-2:1993, ISO 90/2-1986 BS EN 20090-2:1993, ISO 90/2-1986. Light gauge metal containers. Definitions and determination methods for dimensions and capacities. General use containers
BS 6994:1988 BS 6994:1988. Specification for steel shackles for lifting and general engineering purposes: grade M(4)
BS 7036:1988 BS 7036:1988. Code of practice for provision and installation of safety devices for automatic power operated pedestrian door systems
BS 9761:1988 BS 9761:1988. Sectional specification for capability approval of manufacturers of multilayer rigid printed wiring boards of assessed quality with plated through holes
BS 9762:1988 BS 9762:1988. Sectional specification for capability approval of manufacture of double-sided rigid printed wiring boards of assessed quality with plated through holes
BS 9763:1988 BS 9763:1988. Sectional specification for capability approval of manufacturers of single- or double-sided printed wiring boards of assessed quality without plated through holes
BS 9764:1988 BS 9764:1988. Sectional specification for capability approval of manufacturers of single- or double-sided flexible printed wiring boards of assessed quality without through hole connectio
BS 9765:1988 BS 9765:1988. Sectional specification for capability approval of manufacturers of double-sided flexible printed wiring boards of assessed quality with through hole connections and with or
BS 5306-7:1988 BS 5306-7:1988. Fire extinguishing installations and equipment on premises. Specification for powder systems
BS 6916-6:1988, EN 27182:1991,ISO 7182-1984 BS 6916-6:1988, EN 27182:1991,ISO 7182-1984. Chain saws. Method of measurement of airborne noise at the operator's position
BS CECC 32201:1988 BS CECC 32201:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed chip capacitors with metallized electrodes
BS CECC 30101:1988 BS CECC 30101:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed polyethylene-terephthalate film dielectric
BS CECC 30201:1988 BS CECC 30201:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with solid electrolyte
BS CECC 30202:1988 BS CECC 30202:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with non-solid electro
BS CECC 30901:1988 BS CECC 30901:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed polystyrene film dielectric metal foil d.c
BS CECC 31401:1988 BS CECC 31401:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed ceramic dielectric capacitors, dielectric
BS CECC 31501:1988 BS CECC 31501:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed ceramic capacitors of dielectric class 2 f
BS CECC 31701:1988 BS CECC 31701:1988. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors for direct current with electro
BS 6952:Part 1:1988 BS 6952:Part 1:1988. Exterior wood coating systems. Guide to classification and selection
BS 800:1988, EN 55014:1987 BS 800:1988, EN 55014:1987. Specification for limits and methods of measurement of radio interference characteristics of household electrical appliances, portable tools and
BS 5540-4:1988, ISO 4406:1987 BS 5540-4:1988, ISO 4406:1987. Evaluating particulate contamination of hydraulic fluids. Method of defining levels of contamination (solid contaminant code)
PP 7312:1988 PP 7312:1988. Extracts from British Standards for students of structural design
BS 684-1.6:1988, ISO 935:1988 BS 684-1.6:1988, ISO 935:1988. Methods of analysis of fats and fatty oils. Physical methods. Determination of titre
BS 5287:1988 BS 5287:1988. Specification for assessment and labelling of textile floor coverings tested to BS 4790
BS 6910-1:1988 BS 6910-1:1988. Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials
BS 1881-124:1988 BS 1881-124:1988. Testing concrete. Methods for analysis of hardened concrete
BS 2838-1:1988 BS 2838-1:1988. Examination and general treatment couches. Specification for fixed height couches
BS 4361-4:1988, ISO 7007:1983 BS 4361-4:1988, ISO 7007:1983. Woodworking machines. Specification for table bandsawing machines
BS 4361-5:1988, ISO 7008:1983 BS 4361-5:1988, ISO 7008:1983. Woodworking machines. Specification for single blade circular saw benches with or without travelling table
BS 4361-6:1988, ISO 7009:1983 BS 4361-6:1988, ISO 7009:1983. Woodworking machines. Specification for single spindle moulding machines
BS 4361-7:1988, ISO 7568-1986 BS 4361-7:1988, ISO 7568-1986. Woodworking machines. Specification for thickness planing machines with rotary cutterblock for one-side dressing
BS 4361-8:1988, ISO 7569-1986 BS 4361-8:1988, ISO 7569-1986. Woodworking machines. Specification for planing machines for two-, three- or four-side dressing
BS 4361-9:1988, ISO 7570-1986 BS 4361-9:1988, ISO 7570-1986. Woodworking machines. Specification for surface planing and thicknessing machines
BS 4361-10:1988, ISO 7571-1986 BS 4361-10:1988, ISO 7571-1986. Woodworking machines. Specification for surface planing machines with cutterblock for one-side dressing
BS 4361-11:1988, ISO 7945-1985 BS 4361-11:1988, ISO 7945-1985. Woodworking machines. Specification for single spindle boring machines
BS 4361-12:1988, ISO 7946-1985 BS 4361-12:1988, ISO 7946-1985. Woodworking machines. Specification for slot mortising machines
BS 4361-13:1988, ISO 7947-1985 BS 4361-13:1988, ISO 7947-1985. Woodworking machines. Specification for two-, three- and four-side moulding machines
BS 4361-14:1988, ISO 7948:1987 BS 4361-14:1988, ISO 7948:1987. Woodworking machines. Specification for routing machines
BS 4361-15:1988, ISO 7949-1985 BS 4361-15:1988, ISO 7949-1985. Woodworking machines. Specification for veneer pack edge shears
BS 4361-17:1988, ISO 7957:1987 BS 4361-17:1988, ISO 7957:1987. Woodworking machines. Specification for radial circular saws
BS 5316:Part 3:1988, ISO 5198:1987 BS 5316:Part 3:1988, ISO 5198:1987. Specification for acceptance tests for centrifugal, mixed flow and axial pumps. Precision class tests
BS 7017:1988, ISO 7944:1984 BS 7017:1988, ISO 7944:1984. Specification for reference wavelengths for optics and optical instruments
BS 6956-1:1988 BS 6956-1:1988. Jointing materials and compounds. Specification for corrugated metal joint rings
BS 6062:Part 2:1988, IEC 60286-2:1985 BS 6062:Part 2:1988, IEC 60286-2:1985. Packaging of electronic components for automatic handling. Specification for tape packaging of components with unidirection
BS 4313:1988, ISO 2040-1972 BS 4313:1988, ISO 2040-1972. Specification for strontium chromate pigments for paints
BS EN 60439-2:1993 BS EN 60439-2:1993. Specification for low-voltage switchgear and controlgear assemblies. Particular requirements for busbar trunking systems (busways)
BS 6789-7:1988 BS 6789-7:1988. Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Specification fo
BS 1902:Part 8:1988 BS 1902:Part 8:1988. Methods of testing refractory materials. Refractories containing carbon
BS 3487-4:1988, ISO 5361-4:1987 BS 3487-4:1988, ISO 5361-4:1987. Tracheal tubes. Specification for tubes of the Cole type
BS 4886:1988 BS 4886:1988. Specification for hospital bedsteads
BS 5051-1:1988 BS 5051-1:1988. Bullet-resistant glazing. Specification for glazing for interior use
BS 5971:1988, EN 60432:1988 BS 5971:1988, EN 60432:1988. Specification for safety of tungsten filament lamps for domestic and similar general lighting purposes
BS 6413-9:1988, ISO 6743-9:1987 BS 6413-9:1988, ISO 6743-9:1987. Lubricants, industrial oils and related products (class L). Classification for family X (greases)
BS 6821:1988 BS 6821:1988. Methods for aerodynamic testing of dampers and valves
BS 6983:1988, IEC 60520:1975 BS 6983:1988, IEC 60520:1975. Methods for determination and expression of entrance field sizes of electro-optical X-ray image intensifiers
BS 7037-1:1988, ISO 5538:1987 BS 7037-1:1988, ISO 5538:1987. Sampling plans for milk and milk products. Specification for inspection by attributes
BS 7038:1988, ISO 4081:1987 BS 7038:1988, ISO 4081:1987. Specification for rubber coolant hoses and tubing for use on private cars and light commercial vehicles
BS 1133-7.6:1988 BS 1133-7.6:1988. Packaging code. Paper and board wrappers, bags and containers. Moulded pulp packaging
BS 5406-2:1988, EN 60555-2:1987 BS 5406-2:1988, EN 60555-2:1987. Disturbances in supply systems caused by household appliances and similar electrical equipment. Specification of harmonics
BS 5406-3:1988, EN 60555-3:1987,IEC 60555-3:1982 BS 5406-3:1988, EN 60555-3:1987,IEC 60555-3:1982. Disturbances in supply systems caused by household appliances and similar electrical equipment. Speci
BS 6992:Part 5:1988, ISO 3004-6:1986 BS 6992:Part 5:1988, ISO 3004-6:1986. Capacities and related cross sections of open-top cans for food and drinks. Recommendations for cans for milk
BS 4481-3:1988, ISO 6103-1986 BS 4481-3:1988, ISO 6103-1986. Bonded abrasive products. Method for assessment of static balancing of abrasive wheels
BS 3047:1988 BS 3047:1988. Specification for sizes of posters
BS 459:1988 BS 459:1988. Specification for matchboarded wooden door leaves for external use
BS 4500-5:1988, ISO 1947:1973 BS 4500-5:1988, ISO 1947:1973. ISO limits and fits. Specification for system of cone tolerances for conical workpieces from C = 1:3 to 1:500 and lengths from 6 mm to 630
BS 5173-102.3:1988 BS 5173-102.3:1988. Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Determination of volumetric expansion of fuel-dispensing pump hoses
BS 5724:Part 2:Section 2.25:1988 BS 5724:Part 2:Section 2.25:1988. Medical electrical equipment. Particular requirements for safety. Specification for servo-controlled infant radiant warmers
BS 1244-2:1988 BS 1244-2:1988. Metal sinks for domestic purposes. Specification for sit-on and inset sinks
BS 5550-5.12.2:1988, ISO 5758:1987 BS 5550-5.12.2:1988, ISO 5758:1987. Cinematography. Common to more than one film gauge. Miscellaneous. Specification for the minimum information for the labelling of
BS 5607:1988 BS 5607:1988. Code of practice for safe use of explosives in the construction industry
BS 4422-7:1988, ISO 8421-7:1987 BS 4422-7:1988, ISO 8421-7:1987. Glossary of terms associated with fire. Explosion detection and suppression means
BS 5550-5.4.6:1988, ISO 8687:1987 BS 5550-5.4.6:1988, ISO 8687:1987. Cinematography. Common to more than one film gauge. Sound. Method for measurement of the signal to noise ratio of 8 mm type, 16 mm
BS 6916:Part 2:1988, ISO 6532:1982 BS 6916:Part 2:1988, ISO 6532:1982. Chain saws. Method for specifying requirements
BS 6916-3:1988, ISO 6533:1983 BS 6916-3:1988, ISO 6533:1983. Chain saws. Specification for dimensions of front hand guards
BS 6916-4:1988, ISO 6534:1985 BS 6916-4:1988, ISO 6534:1985. Chain saws. Specification for strength of front hand guards
BS 1723-3:1988 BS 1723-3:1988. Brazing. Methods for non-destructive and destructive testing
BS 1723-4:1988 BS 1723-4:1988. Brazing. Methods for specifying brazing procedure and operator approval testing
BS 3366:Part 1:1988, EN 26871:1989,ISO 6871-1987 BS 3366:Part 1:1988, EN 26871:1989,ISO 6871-1987. Dental base metal casting alloys. Specification for denture base alloys
BS 4422-6:1988, ISO 8421-6:1987 BS 4422-6:1988, ISO 8421-6:1987. Glossary of terms associated with fire. Evacuation and means of escape
BS 4425:1988, ISO 1562-1984 BS 4425:1988, ISO 1562-1984. Specification for dental casting gold alloys
BS 4522:1988, ISO 758-1976 BS 4522:1988, ISO 758-1976. Method for determination of absolute density at 20°C of liquid chemical products for industrial use
BS 4682-2:1988 BS 4682-2:1988. Methods of test for dimensional stability of textile floor coverings. Determination of dimensional changes due to changes in ambient humidity
BS 4737-4.3:1988 BS 4737-4.3:1988. Intruder alarm systems in buildings. Codes of practice. Code of practice for exterior alarm systems
BS 5084-4:1988, ISO 6068-1985 BS 5084-4:1988, ISO 6068-1985. Magnetic tape for instrumentation applications. Specification for recording characteristics (including telemetry systems) interchange requi
BS 5766-7:1988, ISO 6651-1987 BS 5766-7:1988, ISO 6651-1987. Methods for analysis of animal feeding stuffs. Determination of aflatoxin B1
BS 6222-4:1988 BS 6222-4:1988. Domestic kitchen equipment. Code of practice for protection, storage and installation of fitted kitchen units
BS 6916-1:1988, ISO 6531:1982 BS 6916-1:1988, ISO 6531:1982. Chain saws. Glossary of terms
BS 6916:Part 7:1988, ISO 7293:1983 BS 6916:Part 7:1988, ISO 7293:1983. Chain saws. Method of evaluating engine performance including fuel consumption
BS 6916-10:1988, ISO 8334:1985 BS 6916-10:1988, ISO 8334:1985. Chain saws. Specification for longitudinal balance
BS 6921:1988, IEC 60795:1984 BS 6921:1988, IEC 60795:1984. Method for evaluation of the thermal endurance of flexible sheet electrical insulating materials using the wrapped tube method
BS 7016-3:1988, ISO 7967-3:1987 BS 7016-3:1988, ISO 7967-3:1987. Components and systems of reciprocating internal combustion engines. Glossary of terms for valves, camshaft drive and actuating mechani
BS 4196-7:1988, ISO 3747:1987 BS 4196-7:1988, ISO 3747:1987. Sound power levels of noise sources. Survey method for determination of sound power levels of noise sources using a reference sound source
BS 4656-2:1988 BS 4656-2:1988. Accuracy of machine tools and methods of test. Specification for copying lathes and copying attachments
BS 6413-5:1988, ISO 6743-5:1988 BS 6413-5:1988, ISO 6743-5:1988. Lubricants, industrial oils and related products (class L). Classification for family T (turbines)
BS 6829-2.1:1988 BS 6829-2.1:1988. Analysis of surface active agents (raw materials). Alkane sulphonates. Method for determination of total alkaline sulphonates content
BS 6914:Part 1:1988, ISO 6165:1987 BS 6914:Part 1:1988, ISO 6165:1987. Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Glossary of terms for basic types of ea
BS 6914-2:1988, ISO 6746-1:1987 BS 6914-2:1988, ISO 6746-1:1987. Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Glossary of terms for base machine
BS 6916-5:1988, ISO 6535-1983 BS 6916-5:1988, ISO 6535-1983. Chain saws. Methods of evaluating chain brake performance
BS 6916-8:1988, ISO 7505:1986 BS 6916-8:1988, ISO 7505:1986. Chain saws. Method of measurement of hand-transmitted vibration
BS 6916-9:1988, ISO 7915-1985 BS 6916-9:1988, ISO 7915-1985. Chain saws. Specification for strength of handles
BS 7010:1988 BS 7010:1988. Code of practice for a system of tolerances for the dimensions of plastics mouldings
BS 7016-1:1988, ISO 7967-1:1987 BS 7016-1:1988, ISO 7967-1:1987. Components and systems of reciprocating internal combustion engines. Glossary of terms for structure and external covers
BS 7115-1:1988 BS 7115-1:1988. Determination of volatile nitrosamines in rubber teats for feeding bottles and babies' dummies. Dichloromethane extraction method
BS 7115-2:1988 BS 7115-2:1988. Determination of volatile nitrosamines in rubber teats for feeding bottles and babies' dummies. Artificial saliva extraction method
BS 5268:Part 6:Section 6.1:1988 BS 5268:Part 6:Section 6.1:1988. Structural use of timber. Code of practice for timber frame walls. Dwellings not exceeding three storeys
BS 7025:1988 BS 7025:1988. Method for preparation of test codes of engineering grade for measurement at the operator's or bystander's position of noise emitted by machinery
BS 7114-1:1988 BS 7114-1:1988. Fireworks. Classification of fireworks
BS 7114-2:1988 BS 7114-2:1988. Fireworks. Specification for fireworks
BS 7114-3:1988 BS 7114-3:1988. Fireworks. Methods of test for fireworks
BS 4317-18:1988 BS 4317-18:1988. Methods of test for cereals and pulses. Determination of hidden insect infestation
BS 6911-1:1988, ISO 9246:1988 BS 6911-1:1988, ISO 9246:1988. Testing earth-moving machinery. Method for determination of volumetric rating of crawler and wheel tractor dozer blades
BS 6912:Part 1:1988, ISO 8643:1988 BS 6912:Part 1:1988, ISO 8643:1988. Safety of earth-moving machinery. Specification for hydraulic excavator and backhoe loader boom lowering control device
BS 6914-3:1988, ISO 6746-2:1987 BS 6914-3:1988, ISO 6746-2:1987. Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Glossary of terms for equipment
BS 7016-4:1988, ISO 7967-4:1988 BS 7016-4:1988, ISO 7967-4:1988. Components and systems of reciprocating internal combustion engines. Glossary of terms for pressure charging and air/exhaust gas ductin
BS 3732-1:1988, ISO 1860-1986 BS 3732-1:1988, ISO 1860-1986. Reels for magnetic tape for instrumentation applications. Specification for precision reels with 76 mm (3 in) centre hole
BS 4978:1988 BS 4978:1988. Specification for softwood grades for structural use
BS 3456-102.21:1988 BS 3456-102.21:1988. Specification for safety of household and similar electrical appliances. Particular requirements. Storage water heaters
BS 5306-6.2:1989 BS 5306-6.2:1989. Fire extinguishing installations and equipment on premises. Foam systems. Specification for medium and high expansion foam systems
BS 6992:Part 1:1988, ISO 3004-1:1986 BS 6992:Part 1:1988, ISO 3004-1:1986. Capacities and related cross sections of open-top cans for food and drinks. Recommendations for cans for general food
BS 6992:Part 3:1988, ISO 3004-3:1986 BS 6992:Part 3:1988, ISO 3004-3:1986. Capacities and related cross sections of open-top cans for food and drinks. Recommendations for cans for drinks
BS 6332-1:1988 BS 6332-1:1988. Thermal performance of domestic gas appliances. Specification for thermal performance of central heating boilers and circulators
DD 177:1988 DD 177:1988. Method of test for the antimicrobial activity of disinfectants in food hygiene
BS 3456:Part 102:Section 102.30:1988 BS 3456:Part 102:Section 102.30:1988. Specification for safety of household and similar electrical appliances. Particular requirements. Room heaters
BS 6984:1988 BS 6984:1988. Specification for dimensions of housings for elastomer-energized plastic-faced hydraulic seals in reciprocating applications
BS 5106:1988 BS 5106:1988. Specification for dimensions of spiral anti-extrusion back-up rings and their housings
BS EN 28030:1993, ISO 8030-1987 BS EN 28030:1993, ISO 8030-1987. Rubber or plastics hoses for underground mining. Method of test for flammability.
BS 5173:Part 103:Section 103.12:1988, ISO 8308:1987 BS 5173:Part 103:Section 103.12:1988, ISO 8308:1987. Methods of test for rubber and plastics hoses and hose assemblies. Physical tests. Determinatio
BS AU 154a:1989 BS AU 154a:1989. Specification for hydraulic trolley jacks
BS 6906-2:1989 BS 6906-2:1989. Methods of test for geotextiles. Determination of the apparent pore size distribution by dry sieving
PP 787:1988 PP 787:1988. Standards and textiles
BS 684-2.43:1988, ISO 7847:1987 BS 684-2.43:1988, ISO 7847:1987. Methods of analysis of fats and fatty oils. Other methods. Determination of polyunsaturated fatty acids with a cis,cis 1,4-diene struct
BS 1726-3:1988 BS 1726-3:1988. Coil springs. Guide for the design of helical torsion springs
BS 6535:Part 3:1989 BS 6535:Part 3:1989. Fire extinguishing media. Specification for powder
BS 7030:1988, ISO 7991:1987 BS 7030:1988, ISO 7991:1987. Method for determination of the coefficient of mean linear thermal expansion of glass
BS 7034-1:1988, ISO 7884-1:1987 BS 7034-1:1988, ISO 7884-1:1987. Viscosity and viscometric fixed points of glass. Recommendations for use in the determination of viscosity and viscometric fixed points
BS 7034-3:1988, ISO 7884-3:1987 BS 7034-3:1988, ISO 7884-3:1987. Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by fibre elongation viscometer
BS 7034-4:1988, ISO 7884-4:1987 BS 7034-4:1988, ISO 7884-4:1987. Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by beam bending
BS 7034-5:1988, ISO 7884-5:1987 BS 7034-5:1988, ISO 7884-5:1987. Viscosity and viscometric fixed points of glass. Method for the determination of working point by sinking bar viscometer
BS 7034-6:1988, ISO 7884-6:1987 BS 7034-6:1988, ISO 7884-6:1987. Viscosity and viscometric fixed points of glass. Method for the determination of softening point
BS 7034-7:1988, ISO 7884-7:1987 BS 7034-7:1988, ISO 7884-7:1987. Viscosity and viscometric fixed points of glass. Method for the determination of annealing point and strain point by beam bending
BS 2C 11:1988, ISO 11-1987 BS 2C 11:1988, ISO 11-1987. Specification for ground pressure test connections for aircraft pressure cabins
BS 4193-17:1989, ISO 7406-1986 BS 4193-17:1989, ISO 7406-1986. Hardmetal insert tooling. Specification for designation of bore type milling cutters for indexable inserts
BS 6988:1989 BS 6988:1989. Method for determination of the adhesion of autoclave tape to tray wrap material
BS 5815-1:1989 BS 5815-1:1989. Sheets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector. Specification for sheeting, sh
BS 644-1:1989 BS 644-1:1989. Wood windows. Specification for factory assembled windows of various types
BS 4819-1:1989, ISO 7284-1984 BS 4819-1:1989, ISO 7284-1984. Resistance welding water-cooled transformers of the press package and portable types. Specification for press-package transformers
BS 6404-8.1:1988, IEC 60404-8-1:1986 BS 6404-8.1:1988, IEC 60404-8-1:1986. Magnetic materials. Individual materials. Specification for magnetically hard materials
BS 6404-8.6:1988, IEC 60404-8-6:1986 BS 6404-8.6:1988, IEC 60404-8-6:1986. Magnetic materials. Individual materials. Specification for soft magnetic metallic materials
BS 6404:Part 8:Section 8.7:1988 BS 6404:Part 8:Section 8.7:1988. Magnetic materials. Individual materials. Specification for grain-oriented magnetic steel sheet and strip
BS 6404:Part 9:1988, IEC 60404-9:1987 BS 6404:Part 9:1988, IEC 60404-9:1987. Magnetic materials. Methods for determination of the geometrical characteristics of magnetic steel sheet and strip
BS 6835:1988 BS 6835:1988. Method for determination of the rate of fatigue crack growth in metallic materials
BS 7015:1989, EN 263:1987 BS 7015:1989, EN 263:1987. Specification for cast acrylic sheet for baths and shower trays for domestic purposes
BS 7020-7.1:1988, ISO 4689-1986 BS 7020-7.1:1988, ISO 4689-1986. Analysis of iron ores. Methods for the determination of sulphur content. Gravimetric method
BS 7020-7.2:1988, ISO 4690-1986 BS 7020-7.2:1988, ISO 4690-1986. Analysis of iron ores. Methods for the determination of sulphur content. Combustion method
BS 7020-9.1:1988, ISO 3886-1986 BS 7020-9.1:1988, ISO 3886-1986. Analysis of iron ores. Methods for the determination of manganese content. Spectrophotometric method
BS 7020:Part 10:Section 10.1:1988, ISO 5418-1984 BS 7020:Part 10:Section 10.1:1988, ISO 5418-1984. Analysis of iron ores. Methods for the determination of copper content. Spectrophotometric method
BS 7020-13:1988, ISO 7834-1987 BS 7020-13:1988, ISO 7834-1987. Analysis of iron ores. Method for the determination of arsenic content. Spectrophotometric method
BS 7020:Part 14:1988, ISO 6831-1986 BS 7020:Part 14:1988, ISO 6831-1986. Analysis of iron ores. Method for the determination of sodium and/or potassium contents: flame atomic absorption spectrometric
BS 7020-19:1988, ISO 4694-1987 BS 7020-19:1988, ISO 4694-1987. Analysis of iron ores. Method for the determination of fluorine content. Ion-selective electrode method
BS 4305-2:1989 BS 4305-2:1989. Baths for domestic purposes made of acrylic material. Specification for connecting dimensions
BS 6404-6:1988, IEC 60404-6:1986 BS 6404-6:1988, IEC 60404-6:1986. Magnetic materials. Methods of measurement of the magnetic properties of isotropic nickel-iron soft magnetic alloys, types E1, E3 and
BS 8212:1988 BS 8212:1988. Code of practice for dry lining and partitioning using gypsum plasterboard
BS CECC 96100:1988 BS CECC 96100:1988. Harmonized system of quality assessment for electronic components. Sectional specification including blank detail specification: rotary switches
BS CECC 96200:1988 BS CECC 96200:1988. Harmonized system of quality assessment for electronic components. Sectional specification including blank detail specification: lever switches
BS CECC 96300:1988 BS CECC 96300:1988. Harmonized system of quality assessment for electronic components. Sectional specification including blank detail specification: sensitive switches
BS CECC 96400:1988 BS CECC 96400:1988. Harmonized system of quality assessment for electronic components. Sectional specification including blank detail specification: push-button switches
BS 7020-1:1988, ISO 7764-1985 BS 7020-1:1988, ISO 7764-1985. Analysis of iron ores. Method for the preparation of pre-dried test samples for chemical analysis
BS 7020-6.1:1988, ISO 2599-1983 BS 7020-6.1:1988, ISO 2599-1983. Analysis of iron ores. Methods for the determination of phosphorus content. Titrimetric method
BS 7020-12:1988, ISO 4691-1985 BS 7020-12:1988, ISO 4691-1985. Analysis of iron ores. Method for the determination of titanium content: spectrophotometric method
BS 7023-2:1988, EN 28378-2:1989,ISO 8378-2:1986 BS 7023-2:1988, EN 28378-2:1989,ISO 8378-2:1986. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using m
BS 7023-3:1988, EN 28378-3:1989,ISO 8378-3:1986 BS 7023-3:1988, EN 28378-3:1989,ISO 8378-3:1986. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using m
BS 7024:Part 1:1988, EN 27487-1:1989,ISO 7487-1:1985 BS 7024:Part 1:1988, EN 27487-1:1989,ISO 7487-1:1985. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchan
BS 7024-2:1988, EN 27487-2:1989,ISO 7487-2-1985 BS 7024-2:1988, EN 27487-2:1989,ISO 7487-2-1985. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using m
BS 7034-2:1988, ISO 7884-2:1987 BS 7034-2:1988, ISO 7884-2:1987. Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by rotation viscometers
BS 7034-8:1988, ISO 7884-8:1987 BS 7034-8:1988, ISO 7884-8:1987. Viscosity and viscometric fixed points of glass. Method for the determination of (dilatometric) transformation temperature
BS 7084:1989 BS 7084:1989. Specification for carbon and carbon-manganese steel tubular cored welding electrodes
BS 1363-3:1989 BS 1363-3:1989. 13 A plugs, socket-outlets and adaptors. Specification for adaptors
BS 5258-5:1989 BS 5258-5:1989. Safety of domestic gas appliances. Specification for gas fires
BS 7062:1988, EN 29661:1991,ISO 9661:1988 BS 7062:1988, EN 29661:1991,ISO 9661:1988. Guide to construction and use of 12.7 mm (0.5 in) wide magnetic tape cartridges for data interchange, recording at
BS 7020:Part 2:1988, ISO 2596-1984 BS 7020:Part 2:1988, ISO 2596-1984. Analysis of iron ores. Method for the determination of hygroscopic moisture in analytical samples
BS 7020-3:1988, ISO 7335-1987 BS 7020-3:1988, ISO 7335-1987. Analysis of iron ores. Method for the determination of combined water content
BS 7020:Part 4:Section 4.1:1988, ISO 2597-1985 BS 7020:Part 4:Section 4.1:1988, ISO 2597-1985. Analysis of iron ores. Method for the determination of total iron content. Titrimetric methods
BS 7020-8.1:1988, ISO 6830-1986 BS 7020-8.1:1988, ISO 6830-1986. Analysis of iron ores. Methods for the determination of aluminium content. Titrimetric method
BS 7020-10.2:1988, ISO 4693-1986 BS 7020-10.2:1988, ISO 4693-1986. Analysis of iron ores. Methods for the determination of copper content. Flame atomic absorption spectrometric method
BS 7020-17:1988, ISO 8753-1987 BS 7020-17:1988, ISO 8753-1987. Analysis of iron ores. Method for the determination of lead and/or zinc contents: flame atomic absorption spectrometric method
BS 7023-1:1988, EN 28378-1:1989,ISO 8378-1:1986 BS 7023-1:1988, EN 28378-1:1989,ISO 8378-1:1986. Guide to construction and use of 130 mm (5.25 in) flexible disk cartridges for data interchange using m
BS 1741-10.1:1989 BS 1741-10.1:1989. Methods for chemical analysis of liquid milk and cream. Determination of titratable acidity. Method for liquid milk
BS 1741-10.2:1989 BS 1741-10.2:1989. Methods for chemical analysis of liquid milk and cream. Determination of titratable acidity. Method for cream
BS 3677:1989, EN 60188:1988 BS 3677:1989, EN 60188:1988. Specification for high-pressure mercury vapour lamps
BS 3936-7:1989 BS 3936-7:1989. Nursery stock. Specification for bedding plants
BS 8010-1:1989 BS 8010-1:1989. Code of practice for pipelines. Pipelines on land: general
BS 4289:Part 2:1989, ISO 658:1988 BS 4289:Part 2:1989, ISO 658:1988. Methods for analysis of oilseeds. Determination of impurities content
BS 4289:Part 4:1989, ISO 659:1988 BS 4289:Part 4:1989, ISO 659:1988. Methods for analysis of oilseeds. Determination of hexane extract (or light petroleum extract) called 'oil content'
BS 4289-5:1989 BS 4289-5:1989. Method for the analysis of oilseeds. Determination of acidity of fat
BS 4305-1:1989, EN 198:1987 BS 4305-1:1989, EN 198:1987. Baths for domestic purposes made of acrylic material. Specification for finished baths
BS 903-A53:1989, ISO 4665-2:1985 BS 903-A53:1989, ISO 4665-2:1985. Physical testing of rubber. Methods for exposure to natural weathering, for use in determining resistance to weathering
BS 903-A54:1989, ISO 4665-3:1987 BS 903-A54:1989, ISO 4665-3:1987. Physical testing of rubber. Methods for exposure to artificial light, for use in determining resistance to weathering
BS EN 60546-2:1993 BS EN 60546-2:1993. Controllers with analogue signals for use in industrial-process control systems. Guidance for inspection and routine testing
BS 5983:Part 1:1989, ISO 6124-1:1987 BS 5983:Part 1:1989, ISO 6124-1:1987. Metric spherical plain bearings. Specification for dimensions of spherical plain radial bearings, joint type, dimension serie
BS 6288-8:1989, IEC 60094-8:1987 BS 6288-8:1989, IEC 60094-8:1987. Magnetic tape sound recording and reproducing systems. Specification for eight-track magnetic tape cartridge for commercial tape reco
BS 6413-3.2:1989, ISO 6743-3B:1988 BS 6413-3.2:1989, ISO 6743-3B:1988. Lubricants, industrial oils and related products (class L). Classification for family D (compressors). Gas and refrigeration comp
BS 6494:Part 3:1989, ISO 6264:1987 BS 6494:Part 3:1989, ISO 6264:1987. Hydraulic fluid power valve mounting surfaces. Specification for pressure-relief valves
BS 6494-4:1989, ISO 7790:1986 BS 6494-4:1989, ISO 7790:1986. Hydraulic fluid power valve mounting surfaces. Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and
BS 6494:Part 5:1989, ISO 6263:1987 BS 6494:Part 5:1989, ISO 6263:1987. Hydraulic fluid power valve mounting surfaces. Specificationfor compensated flow-control valves
BS 6494-6:1989, ISO 5781:1987 BS 6494-6:1989, ISO 5781:1987. Hydraulic fluid power valve mounting surfaces. Specification for pressure-control valves (excluding pressure-relief valves), sequence valve
BS 6913-1:1989, ISO 4510-1:1987 BS 6913-1:1989, ISO 4510-1:1987. Operation and maintenance of earth-moving machinery. Guide to common maintenance and adjustment service tools
BS 7006:1989, ISO 8912-1986 BS 7006:1989, ISO 8912-1986. Specification for trailed agricultural rollers
BS 7011-0:1989 BS 7011-0:1989. Consumable accessories for light microscopes. General introduction
BS 7012-0:1989 BS 7012-0:1989. Light microscopes. General introduction
BS 7041:1989, IEC 60866:1987 BS 7041:1989, IEC 60866:1987. Specification for characteristics and calibration of hydrophones for operation in the frequency range 0.5 MHz to 15 MHz
BS EN 28739:1992, ISO 8739-1986 BS EN 28739:1992, ISO 8739-1986. Grooved pins. Full-length parallel grooved, with pilot
BS EN 28741:1992, ISO 8741:1986 BS EN 28741:1992, ISO 8741:1986. Grooved pins. Half length reverse taper grooved
BS EN 28743:1992, ISO 8743:1986 BS EN 28743:1992, ISO 8743:1986. Grooved pins. Half-length centre grooved
BS EN 28745:1992, ISO 8745:1986 BS EN 28745:1992, ISO 8745:1986. Grooved pins. Half-length taper grooved
BS EN 28746:1992, ISO 8746:1986 BS EN 28746:1992, ISO 8746:1986. Grooved pins with round head
BS EN 28747:1992, ISO 8747:1986 BS EN 28747:1992, ISO 8747:1986. Grooved pins with countersunk head
BS EN 28735:1992, ISO 8735:1987 BS EN 28735:1992, ISO 8735:1987. Parallel pins with internal thread, hardened
BS EN 28748:1992, ISO 8748:1987 BS EN 28748:1992, ISO 8748:1987. Spring-type straight pins. Coiled, heavy duty
BS EN 28750:1992, ISO 8750:1987 BS EN 28750:1992, ISO 8750:1987. Spring-type straight pins. Coiled, standard duty
BS 8010-2.3:1988 BS 8010-2.3:1988. Code of practice for pipelines. Pipelines on land: design, construction and installation. Asbestos cement
BS 903-A55:1989, ISO 4665-1:1985 BS 903-A55:1989, ISO 4665-1:1985. Physical testing of rubber. Methods for assessment of changes in properties after exposure to natural weathering or artificial light,
BS 3862:1989, ISO 639:1988 BS 3862:1989, ISO 639:1988. Specification for the representation of names of languages
BS EN ISO 8580:1995 BS EN ISO 8580:1995. Rubber and plastics hoses. Determination of ultra-violet resistance under static conditions
BS 5372:1989 BS 5372:1989. Specification for dimensions of cable terminations for 3-core and 4-core polymeric insulated cables of rated voltages 600/1000 V and 1900/3300 V having aluminium conductors
BS 5664-2.2:1988, IEC 60455-2-2:1984 BS 5664-2.2:1988, IEC 60455-2-2:1984. Solventless polymerisable resinous compounds used for electrical insulation. Methods of test. Coating powders
BS 5817-11:1989, IEC 60574-11:1987 BS 5817-11:1989, IEC 60574-11:1987. Specification for audiovisual, video and television equipment and systems. Methods for operating video recording systems to facil
BS 6721-7:1989, ISO 4742-1984 BS 6721-7:1989, ISO 4742-1984. Sampling and analysis of copper and copper alloys. Method for determination of nickel in copper alloys: gravimetric method
BS 6993-1:1989 BS 6993-1:1989. Thermal and radiometric properties of glazing. Method for calculation of the steady state U-value (thermal transmittance)
BS 7011-3.1:1989, ISO 8255-1:1986 BS 7011-3.1:1989, ISO 8255-1:1986. Consumable accessories for light microscopes. Cover glasses. Specification for dimensions and optical properties
BS 7012:Part 4:1989, ISO 8038-1985 BS 7012:Part 4:1989, ISO 8038-1985. Light microscopes. Specification for microscope objective and nosepiece screw threads
BS 7012-5:1988, ISO 8040-1986 BS 7012-5:1988, ISO 8040-1986. Light microscopes. Specification for connecting dimensions of tube slides and tube slots
BS CECC 32200:1989 BS CECC 32200:1989. Harmonized system of quality assessment for electronic components. Sectional specification: fixed chip capacitors with metallized electrodes and polyethylene-ter
BS 7022:1988 BS 7022:1988. Guide for geophysical logging of boreholes for hydrogeological purposes
BS 2099:1989 BS 2099:1989. Specification for castors for hospital equipment
BS 5551-2.5:1989, ISO 7742:1988 BS 5551-2.5:1989, ISO 7742:1988. Fertilizers. Sampling. Method for reduction of samples of solid fertilizers
BS 5588-9:1989 BS 5588-9:1989. Fire precautions in the design, construction and use of buildings. Code of practice for ventilation and air conditioning ductwork
BS 5817-7:1989, IEC 60574-7:1987 BS 5817-7:1989, IEC 60574-7:1987. Specification for audiovisual, video and television equipment and systems. Guide for safe handling and operation of audiovisual equip
BS 6721-6:1989, ISO 4741-1984 BS 6721-6:1989, ISO 4741-1984. Sampling and analysis of copper and copper alloys. Method for determination of phosphorus in copper and copper alloys by spectrophotometry
BS 6721-8:1989, ISO 4743-1984 BS 6721-8:1989, ISO 4743-1984. Sampling and analysis of copper and copper alloys. Method for determination of nickel in copper alloys: titrimetric method
BS 6721-10:1989, ISO 6437-1984 BS 6721-10:1989, ISO 6437-1984. Sampling and analysis of copper and copper alloys. Method for determination of chromium in copper alloys: titrimetric method
BS 6721-11:1989, ISO 7266:1984 BS 6721-11:1989, ISO 7266:1984. Sampling and analysis of copper and copper alloys. Method for determination of sulphur in copper and copper alloys: combustion titrimetri
BS 6789-6.2:1989 BS 6789-6.2:1989. Apparatus with one or more particular functions for connection to certain public switched telephone networks. Specification for series connected apparatus. Apparatus
BS AU 50-1.7.1:1989 BS AU 50-1.7.1:1989. Tyres and wheels. Tyres. Moped tyres. Specification for tyre designations, dimensions and load ratings
BS 684-2.42:1989, ISO 7366:1987 BS 684-2.42:1989, ISO 7366:1987. Methods of analysis of fats and fatty oils. Other methods. Determination of 1-monoglycerides and free glycerol contents
BS 903-A56:1989, ISO 5603:1986 BS 903-A56:1989, ISO 5603:1986. Physical testing of rubber. Determination of adhesion to wire cord
BS 6829-2.3:1989, ISO 6121:1988 BS 6829-2.3:1989, ISO 6121:1988. Analysis of surface active agents (raw materials). Alkane sulphonates. Method for determination of alkane monosulphonates content
BS 6989:1989, ISO 8456-1985 BS 6989:1989, ISO 8456-1985. Guide to safety of storage equipment for loose bulk materials
BS 5218:1989, EN 21:1988 BS 5218:1989, EN 21:1988. Wood preservatives. Determination of the toxic values against Anobium punctatum (De Geer) by larval transfer (laboratory method)
BS 6081:1989 BS 6081:1989. Specification for terminations for mineral-insulated cables
BS 6375-1:1989 BS 6375-1:1989. Performance of windows. Classification for weathertightness (including guidance on selection and specification)
BS 5435:1989, EN 47:1988 BS 5435:1989, EN 47:1988. Wood preservatives. Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) (laboratory method)
BS 5436:1989, EN 48:1988 BS 5436:1989, EN 48:1988. Wood preservatives. Determination of eradicant action against larvae of Anobium punctatum (De Geer) (laboratory method)
BS QC 750112:1988, IEC 60747-8-1:1987 BS QC 750112:1988, IEC 60747-8-1:1987. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Semiconduc
BS 3288-4:1989 BS 3288-4:1989. Insulator and conductor fittings for overhead power lines. Locking devices for ball and socket couplings of string insulator units: dimensions and tests
BS 5434:1989, EN 46:1988 BS 5434:1989, EN 46:1988. Wood preservatives. Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) (laboratory method)
BS 6571-2:1989 BS 6571-2:1989. Vehicle parking control equipment. Specification for electrically powered parking meters
BS 1806:1989 BS 1806:1989. Specification for dimensions of toroidal sealing rings ('O'-rings) and their housings (inch series)
BS 770-3:1989, ISO 1735:1987 BS 770-3:1989, ISO 1735:1987. Methods for chemical analysis of cheese. Determination of fat content (reference method)
BS 1932:Part 1:1989 BS 1932:Part 1:1989. Testing the strength of yarns and threads from packages. Methods for determination of breaking strength and breaking extension
BS 2463-2:1989 BS 2463-2:1989. Transfusion equipment for medical use. Specification for administration sets
BS 7033-2:1989 BS 7033-2:1989. Cleaning and polishing cloths. Specification for industrial wipers from reclaimed materials, and waste yarn for cleaning and lubricating purposes
BS 7033-3:1989 BS 7033-3:1989. Cleaning and polishing cloths. Specification for floorcloths and dishcloths
BS 7131:Part 1:1989 BS 7131:Part 1:1989. Performance rating of textile floor coverings. Specification for textile floor coverings with yarn pile
BS 4853:1989 BS 4853:1989. Specification for tensional steel strapping
BS 2011-2.1Ta:1989, IEC 60068-2-54:1985 BS 2011-2.1Ta:1989, IEC 60068-2-54:1985. Environmental testing. Tests. Test Ta. Soldering. Solderability testing by the wetting balance method
BS 5665-1:1989, EN 71-1:1988 BS 5665-1:1989, EN 71-1:1988. Safety of toys. Specification for mechanical and physical properties
BS 5665:Part 3:1989, EN 71-3:1988 BS 5665:Part 3:1989, EN 71-3:1988. Safety of toys. Specification for migration of certain elements
BS 6049-5:1989, ISO 1576:1988 BS 6049-5:1989, ISO 1576:1988. Methods of test for tea. Determination of water-soluble ash and water-insoluble ash
BS 302-7:1989 BS 302-7:1989. Stranded steel wire ropes. Specification for large diameter ropes for general purposes
BS 1660-4:1989, ISO 297:1988 BS 1660-4:1989, ISO 297:1988. Machine tapers. Specification for spindle noses and tool shanks with self-release 7/24 tapers
BS 3998:1989 BS 3998:1989. Recommendations for tree work
BS 5724:Part 2:Section 2.24:1989 BS 5724:Part 2:Section 2.24:1989. Medical electrical equipment. Particular requirements for safety. Specification for humidifiers
BS 7033-1:1989 BS 7033-1:1989. Cleaning and polishing cloths. Specification for optical polishing cloths for use on transparent plastics panels
BS EN 28064:1994, ISO 8064-1985 BS EN 28064:1994, ISO 8064-1985. Information processing. Reels for 12,7 mm (0,5 in) wide magnetic tapes. Sizes 16, 18 and 22
BS 4434:1989 BS 4434:1989. Specification for safety aspects in the design, construction and installation of refrigerating appliances and systems
BS 7166:1989 BS 7166:1989. Specification for wedge and socket anchorages for wire ropes
BS 302-8:1989 BS 302-8:1989. Stranded steel wire ropes. Specification for higher breaking load ropes
BS 3288-3:1989 BS 3288-3:1989. Insulator and conductor fittings for overhead power lines. Dimensions of ball and socket couplings of string insulator units
BS 7078:1989 BS 7078:1989. Method for determination of the electrical resistance to earth of an installed textile floor covering
BS 5761-1:1989, EN 73:1988 BS 5761-1:1989, EN 73:1988. Wood preservatives. Accelerated ageing of treated wood prior to biological testing. Evaporative ageing procedure
BS 6854-5:1989 BS 6854-5:1989. Code of practice for safeguarding woodworking machines. Narrow band sawing machines
Efficient refurbishment of housing:1989 Efficient refurbishment of housing:1989. Energy efficiency in housing. Designer's manual to accompany BS 8211-1:1988, British Standard code of practice for ener
BS 6992:Part 4:1989, ISO 3004-5:1988 BS 6992:Part 4:1989, ISO 3004-5:1988. Capacities and related cross sections of open-top cans for food and drinks. Recommendations for cans for fish and other fishe
BS 7035:1989 BS 7035:1989. Code of practice for socketing of stranded steel wire ropes
BS 2N 2:1989 BS 2N 2:1989. Specification for general requirements for construction and performance of airborne chemical oxygen generators
BS 5889:1989 BS 5889:1989. Specification for one-part gun grade silicone-based sealants
BS CECC 30500:1989 BS CECC 30500:1989. Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct
BS 5261-3:1989 BS 5261-3:1989. Copy preparation and proof correction. Specification for marks for mathematical copy preparation and mathematical proof correction and their uses
BS 1041-3:1989 BS 1041-3:1989. Temperature measurement. Guide to selection and use of industrial resistance thermometers
BS 3487:Part 1:1989, ISO 5361-1:1988 BS 3487:Part 1:1989, ISO 5361-1:1988. Tracheal tubes. Specification for all types of tubes
BS 4422-5:1989, ISO 8421-5:1988 BS 4422-5:1989, ISO 8421-5:1988. Glossary of terms associated with fire. Smoke control
BS 4788:1989 BS 4788:1989. Specification for rating and performance of dehumidifiers incorporating electrically operated refrigeration systems
BS 5828:1989 BS 5828:1989. Methods for biological assessment of dental materials
BS 6996:1989 BS 6996:1989. Specification for mineral oil resistant acrylonitrile-butadiene rubber compounds
BS 3C 7:1989 BS 3C 7:1989. Specification for aircraft tyre valves: interchangeability dimensions
BS 6349-6:1989 BS 6349-6:1989. Maritime structures. Design of inshore moorings and floating structures
BS 7083:1989 BS 7083:1989. Recommendations for the accommodation and operating environment of computer equipment
BS 4490:1989 BS 4490:1989. Methods for micrographic determination of the grain size of steel
BS 2872:1989 BS 2872:1989. Specification for copper and copper alloy forging stock and forgings
BS EN 28601:1992, ISO 8601:1988 BS EN 28601:1992, ISO 8601:1988. Specification for representation of dates and times in information interchange
BS 4504:Part 3:Section 3.2:1989 BS 4504:Part 3:Section 3.2:1989. Circular flanges for pipes, valves and fittings (PN designated). Steel, cast iron and copper alloy flanges. Specification for cast iron
BS 4504-3.3:1989 BS 4504-3.3:1989. Circular flanges for pipes, valves and fittings (PN designated). Specification for copper alloy and composite flanges
BS 6189:1989 BS 6189:1989. Glossary of terms relating to fabrics and associated fibres, yarns and processes
BS 6684:1989 BS 6684:1989. Specification for safety harnesses (including detachable walking reins) for restraining children when in perambulators (baby carriages), pushchairs and high chairs and when
BS 7077-2.2:1989, EN 23964:1989,ISO 3964:1982 BS 7077-2.2:1989, EN 23964:1989,ISO 3964:1982. Dental handpieces and accessories. Accessories. Specification for coupling dimensions
BS 4491:Part 1:1989, EN 60320-1:1987 BS 4491:Part 1:1989, EN 60320-1:1987. Appliance couplers for household and similar general purposes. Specification of general requirements
BS 4945:1989 BS 4945:1989. Specification for functional and performance characteristics of miners' caplamps
BS 5486-11:1989 BS 5486-11:1989. Low-voltage switchgear and controlgear assemblies. Specification for particular requirements of fuseboards
BS 7014:1989 BS 7014:1989. Guide to the romanization of Chinese
BS 1560-3.1:1989 BS 1560-3.1:1989. Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges. Specification for steel flanges
BS 1560-3.3:1989 BS 1560-3.3:1989. Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges. Specification for copper alloy and composite flanges
BS 7043:1989 BS 7043:1989. Specification for silver plated table and decorative holloware
BS 7158:1989 BS 7158:1989. Specification for plastics inspection chambers for drains
BS 4285-3.4.2:1989 BS 4285-3.4.2:1989. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumeration of lipolytic microorga
BS 7068:1989 BS 7068:1989. Specification for alternating pressure air mattresses
BS 679:1989 BS 679:1989. Specification for filters, cover lenses and backing lenses for use during welding and similar operations
BS 4800:1989 BS 4800:1989. Schedule of paint colours for building purposes
BS 5268-7.1:1989 BS 5268-7.1:1989. Structural use of timber. Recommendations for the calculation basis for span tables. Domestic floor joists
BS 5268-7.2:1989 BS 5268-7.2:1989. Structural use of timber. Recommendations for the calculation basis for span tables. Joists for flat roofs
BS 684:Part 2:Section 2.24:1989, ISO 6885:1988 BS 684:Part 2:Section 2.24:1989, ISO 6885:1988. Methods of analysis of fats and fatty oils. Other methods. Determination of anisidine value
BS 4935:1989 BS 4935:1989. Method of specifying acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials
BS 5348-2:1989, ISO 3100-2:1989 BS 5348-2:1989, ISO 3100-2:1989. Methods for sampling meat and meat products. Preparation of test samples for microbiological examination
BS 5486-12:1989 BS 5486-12:1989. Low-voltage switchgear and controlgear assemblies. Specification for particular requirements of type-tested miniature circuit-breaker boards
BS 5486-13:1989 BS 5486-13:1989. Low-voltage switchgear and controlgear assemblies. Specification for particular requirements of consumer units
BS 5742:1989 BS 5742:1989. Specification for textile labels requiring to be washed and/or dry cleaned
BS 7021:1989 BS 7021:1989. Code of practice for thermal insulation of roofs externally by means of sprayed rigid polyurethane (PUR) or polyisocyanurate (PIR) foam
BS 5268-7.3:1989 BS 5268-7.3:1989. Structural use of timber. Recommendations for the calculation basis for span tables. Ceiling joists
BS 5698-1:1989, IEC 60469-1:1987 BS 5698-1:1989, IEC 60469-1:1987. Guide to pulse techniques and apparatus. Pulse terms and definitions
BS 5757:1989, EN 28627:1989,ISO 8627:1987 BS 5757:1989, EN 28627:1989,ISO 8627:1987. Method for determination of stiffness of the tufted area of toothbrushes
BS 6840-16:1989, IEC 60268-16:1988 BS 6840-16:1989, IEC 60268-16:1988. Sound system equipment. Guide to the 'RASTI' method for the objective rating of speech intelligibility in auditoria
BS 7088:1989 BS 7088:1989. Specification for pneumatic tourniquet equipment
BS 397:Part 1:1989, IEC 60086-1:1987 BS 397:Part 1:1989, IEC 60086-1:1987. Primary batteries. Specification for general requirements
BS 585-1:1989 BS 585-1:1989. Wood stairs. Specification for stairs with closed risers for domestic use, including straight and winder flights and quarter or half landings
BS 891:1989 BS 891:1989. Methods for hardness test (Rockwell method) and for verification of hardness testing machines (Rockwell method)
BS 4504-3.1:1989 BS 4504-3.1:1989. Circular flanges for pipes, valves and fittings (PN designated). Steel, cast iron and copper alloy flanges. Specification for steel flanges
BS 7080-1:1989, ISO 8462-1:1986 BS 7080-1:1989, ISO 8462-1:1986. Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge for data interchange, using GCR recording at 394 ftpmm (1000
BS 7080-2:1989, ISO 8462-2:1986 BS 7080-2:1989, ISO 8462-2:1986. Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge using GCR for data interchange, recording at 394 ftpmm (10 0
BS 7081-1:1989, ISO 8063-1:1986 BS 7081-1:1989, ISO 8063-1:1986. Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge using IMFM for data interchange, recording at 252 ftpmm (640
BS 5268-7.4:1989 BS 5268-7.4:1989. Structural use of timber. Ceiling binders
BS 5724:Part 2:Section 2.1:1989 BS 5724:Part 2:Section 2.1:1989. Medical electrical equipment. Particular requirements for safety. Specification for medical electron accelerators in the range 1 MeV to
BS 1715-2.1:1989, ISO 685:1975 BS 1715-2.1:1989, ISO 685:1975. Analysis of soaps. Quantitative test methods. Method for determination of total alkali content and total fatty matter content
BS 4742-7:1989 BS 4742-7:1989. Hydraulic equipment for agricultural machinery. Specification for port connections for agricultural trailed vehicle hydraulic brake couplings
BS 5698-2:1989, IEC 60469-2:1987 BS 5698-2:1989, IEC 60469-2:1987. Guide to pulse techniques and apparatus. Pulse measurement and analysis, general considerations
BS 6571-1:1989 BS 6571-1:1989. Vehicle parking control equipment. Specification for coin operated clockwork parking meters
BS 4431:1989 BS 4431:1989. Methods of sampling and test for liquefied anhydrous ammonia
BS 6571-3:1989 BS 6571-3:1989. Vehicle parking control equipment. Specification for pay and display equipment
BS 4427-14:1989 BS 4427-14:1989. Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use. Condensed phosphates fo
BS 7087:Part 1:1989 BS 7087:Part 1:1989. Herbs and spices ready for food use. Specification for black and white pepper (whole and ground)
BS 2890:1989 BS 2890:1989. Specification for troughed belt conveyors
BS 7120:1989 BS 7120:1989. Specification for rating and performance of air to liquid and liquid to liquid chilling packages
BS 2052:1989 BS 2052:1989. Specification for ropes made from manila, sisal, hemp, cotton and coir
BS 5454:1989 BS 5454:1989. Recommendations for storage and exhibition of archival documents
BS 1715-2.5:1989, ISO 1067:1974 BS 1715-2.5:1989, ISO 1067:1974. Analysis of soaps. Quantitative test methods. Method for determination of unsaponifiable, unsaponified, and unsaponified saponifiable m
BS 1715-2.6:1989, ISO 672:1978 BS 1715-2.6:1989, ISO 672:1978. Analysis of soaps. Quantitative test methods. Method for determination of moisture and volatile matter content
BS 1715-2.7:1989, ISO 4323:1977 BS 1715-2.7:1989, ISO 4323:1977. Analysis of soaps. Quantitative test methods. Method for determination of chloride content
BS 1715-2.8:1989, ISO 1066:1975 BS 1715-2.8:1989, ISO 1066:1975. Analysis of soaps. Quantitative test methods. Method for determination of glycerol content
BS 1715-2.11:1989, ISO 673:1989 BS 1715-2.11:1989, ISO 673:1989. Analysis of soaps. Quantitative test methods. Method for determination of ethanol-insoluble matter content
BS 7074-1:1989 BS 7074-1:1989. Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems. Code of practice for domestic heating and hot water supply
BS AU 230:1989, ISO 7401:1988 BS AU 230:1989, ISO 7401:1988. Methods of test for lateral transient response behaviour of passenger cars
BS 6493:Part 2:Section 2.4:1989, IEC 60748-4:1987 BS 6493:Part 2:Section 2.4:1989, IEC 60748-4:1987. Semiconductor devices. Integrated circuits. Recommendations for interface integrated circuits
BS 5345-1:1989 BS 5345-1:1989. Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or expl
BS 7090-1:1989, ISO 8571-1:1988 BS 7090-1:1989, ISO 8571-1:1988. Open Systems Interconnection: file transfer, access and management. General introduction
BS 7093:1989 BS 7093:1989. Open Systems Interconnection: connection-oriented presentation service definition
BS 8313:1989 BS 8313:1989. Code of practice for accommodation of building services in ducts
BS 7090-3:1989, ISO 8571-3:1988 BS 7090-3:1989, ISO 8571-3:1988. Open Systems Interconnection: file transfer, access and management. File service definition
BS 7091:1989, ISO 8649:1988 BS 7091:1989, ISO 8649:1988. Open Systems Interconnection: service definition for the Association Control Service Element
BS 6196:1989 BS 6196:1989. Specification for sterile epidural catheters and introducer needles for single use
BS 4175:1989 BS 4175:1989. Methods for superficial hardness test (Rockwell method) and for verification of superficial hardness testing machines (Rockwell method)
BS 696-2:1989 BS 696-2:1989. Determination of fat content of milk and milk products (Gerber method). Methods
BS 2893:1989 BS 2893:1989. Specification for chemical preparations for portable and transportable chemical closets (excluding those for use in aircrafts)
BS 7090-4:1989, ISO 8571-4:1988 BS 7090-4:1989, ISO 8571-4:1988. Open Systems Interconnection: file transfer, access and management. File protocol specification
BS 3574:1989 BS 3574:1989. Specification for the controlled storage and packaging of vulcanized rubber and rubber products
BS 5160:1989 BS 5160:1989. Specification for steel globe valves, globe stop and check valves and lift type check valves
BS 7094:1989, ISO 8823:1988 BS 7094:1989, ISO 8823:1988. Open Systems Interconnection: connection-oriented presentation protocol specification
BS 7090-2:1989, ISO 8571-2:1988 BS 7090-2:1989, ISO 8571-2:1988. Open Systems Interconnection: file transfer, access and management. Virtual filestore definition
BS 7092:1989, ISO 8650:1988 BS 7092:1989, ISO 8650:1988. Open Systems Interconnection: protocol specification for the Association Control Service Element
BS 598:Part 102:1989 BS 598:Part 102:1989. Sampling and examination of bituminous mixtures for roads and other paved areas. Analytical test methods
BS 6138:1989 BS 6138:1989. Glossary of terms used in the adhesives industry
BS 1715-2.2:1989, ISO 684:1974 BS 1715-2.2:1989, ISO 684:1974. Analysis of soaps. Quantitative test methods. Method for determination of total free alkali content
BS 1715-2.3:1989, ISO 456:1973 BS 1715-2.3:1989, ISO 456:1973. Analysis of soaps. Quantitative test methods. Method for determination of free caustic alkali content
BS 1741-7.1:1989 BS 1741-7.1:1989. Methods for chemical analysis of liquid milk and cream. Determination of lactose content. Reference method
BS 1741-7.2:1989 BS 1741-7.2:1989. Methods for chemical analysis of liquid milk and cream. Determination of lactose content. Routine method
BS 2881:1989 BS 2881:1989. Specification for cupboards for the storage of medicines in health care premises
BS 7081-2:1989, ISO 8063-2:1986 BS 7081-2:1989, ISO 8063-2:1986. Guide to construction and use of 6.30 mm (0.25 in) magnetic tape cartridge for data interchange, using IMFM recording at 252 ftpmm (640
BS 1741-11:1989 BS 1741-11:1989. Methods for chemical analysis of liquid milk and cream. Detection of detergent/disinfectant residues
BS 5655-3:1989 BS 5655-3:1989. Lifts and service lifts. Specification for electric service lifts
BS 7186:1989 BS 7186:1989. Specification for non-domestic gas-fired overhead radiant tube heaters
BS 8010-2.7:1989 BS 8010-2.7:1989. Code of practice for pipelines. Pipelines on land: design, construction and installation. Precast concrete
BS 4080:Part 1:1989 BS 4080:Part 1:1989. Specification for severity levels for discontinuities in steel castings. Surface discontinuities revealed by magnetic particle flaw detection
BS 5250:1989 BS 5250:1989. Code of practice for control of condensation in buildings
BS F 136:1989 BS F 136:1989. Specification for pigmented chlorosulphonated polyethylene rubber-coated nylon fabric (190 g/m2) for aerospace purposes
BS 7175:1989 BS 7175:1989. Methods of test for the ignitability of bedcovers and pillows by smouldering and flaming ignition sources
BS 4466:1989 BS 4466:1989. Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete
BS 336:1989 BS 336:1989. Specification for fire hose couplings and ancillary equipment
BS 4285-3.10.1:1989 BS 4285-3.10.1:1989. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Staphylococcus aureus. Enumerati
BS 4285-3.10.2:1989 BS 4285-3.10.2:1989. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms Staphylococcus aureus. Detection
BS 4285-3.10.3:1989 BS 4285-3.10.3:1989. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Staphylococcus aureus. Enumerati
BS 5157:1989 BS 5157:1989. Specification for steel gate (parallel slide) valves
BS 7074-2:1989 BS 7074-2:1989. Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems. Code of practice for low and medium temperature hot water
BS 8081:1989 BS 8081:1989. Code of practice for ground anchorages
BS 4080:Part 2:1989 BS 4080:Part 2:1989. Specification for severity levels for discontinuities in steel castings. Surface discontinuities revealed by penetrant flaw detection
BS 7172:1989 BS 7172:1989. Guide to assessment of position, size and departure from nominal form of geometric features
BS 812-120:1989 BS 812-120:1989. Testing aggregates. Method for testing and classifying drying shrinkage of aggregates in concrete
BS 3900-G6:1989 BS 3900-G6:1989. Methods of test for paints. Assessment of resistance to fungal growth
BS AU 24a:1989 BS AU 24a:1989. Specification for towing connections for trailers up to 5000 kg gross mass
BS 6068-4.2:1989, ISO 8199:1988 BS 6068-4.2:1989, ISO 8199:1988. Water quality. Microbiological methods. Guide to the enumeration of micro-organism by culture
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
