BIS Standards Catalogue
BS 4437:1987 BS 4437:1987. Method for determining hardenability of steel by end quenching (Jominy test)
BS 5550-3.4.9:1987, ISO 7831-1986 BS 5550-3.4.9:1987, ISO 7831-1986. Cinematography. 35 mm film. Sound. Specification for reproduction characteristics of the A-chain frequency response for 35 mm photo
BS 5550-5.4.5:1987, ISO 4834-1986 BS 5550-5.4.5:1987, ISO 4834-1986. Cinematography. Common to more than one gauge. Sound. Specification for basic technical characteristics of magnetic sound test film
BS 5942-2:1987, IEC 60581-2:1986 BS 5942-2:1987, IEC 60581-2:1986. High fidelity audio equipment and systems; minimum performance requirements. Specification for FM radio tuners
BS AU 217-1a:1987 BS AU 217-1a:1987. Maximum road speed limiters for motor vehicles. Specification for installed requirements
BS 4335:1987 BS 4335:1987. Glossary of terms used in project network techniques
BS 4429:1987 BS 4429:1987. Specification for rigging screws and turnbuckles for general engineering, lifting purposes and pipe hanger applications
BS 6161:Part 10:1987 BS 6161:Part 10:1987. Methods of test for anodic oxidation coatings on aluminium and its alloys. Measurement of mean specific abrasion resistance with an abrasive jet test apparat
BS 3056-8:1987 BS 3056-8:1987. Sizes of refractory bricks. Specification for bricks for ladles
BS 4843:1987 BS 4843:1987. Specification for sterile intravascular cannula units for single use
BS 6727:1987, ISO 6093-1985 BS 6727:1987, ISO 6093-1985. Specification for representation of numerical values in character strings for information interchange
DD 158:1987 DD 158:1987. Filters for mains signalling systems
BS 5173-101.2:1987 BS 5173-101.2:1987. Methods of test for rubber and plastics hoses and hose assemblies. Determination of dimensions. Measurement of length of hoses and hose assemblies
BS 5173-102.8:1987 BS 5173-102.8:1987. Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Pressure impulse test for rigid helix reinforced thermoplastics hose
BS 1902-7.6:1987 BS 1902-7.6:1987. Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Testing of materials as preformed test pieces
BS 4058:1987, ISO 5807:1985 BS 4058:1987, ISO 5807:1985. Specification for data processing flow chart symbols, rules and conventions
BS 476-20:1987 BS 476-20:1987. Fire tests on building materials and structures. Method for determination of the fire resistance of elements of construction (general principles)
BS 476-21:1987 BS 476-21:1987. Fire tests on building materials and structures. Methods for determination of the fire resistance of loadbearing elements of construction
BS 476-22:1987 BS 476-22:1987. Fire tests on building materials and structures. Methods for determination of the fire resistance of non-loadbearing elements of construction
BS 476-24:1987, ISO 6944:1985 BS 476-24:1987, ISO 6944:1985. Fire tests on building materials and structures. Method for determination of the fire resistance of ventilation ducts
BS 6700:1987 BS 6700:1987. Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages
BS EN ISO 6682:1995 BS EN ISO 6682:1995. Earth-moving machinery. Zones of comfort and reach for controls
BS 6200-3.34.1:1987, EN 24947:1991,ISO 4947:1986 BS 6200-3.34.1:1987, EN 24947:1991,ISO 4947:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of
BS 1726-1:1987 BS 1726-1:1987. Coil springs. Guide for the design of helical compression springs
BS 9093:1979 BS 9093:1979. Rules for the preparation of detail specifications for variable pre-set capacitors, type C (full assessment level)
BS 5423:1987 BS 5423:1987. Specification for portable fire extinguishers
BS 6735:1987 BS 6735:1987. Specification for reach volumes for the location of controls on agricultural tractors and machinery
BS 6834:1987 BS 6834:1987. Specification for active anaesthetic gas scavenging systems
BS 4778:Part 1:1987, EN 28402:1991,ISO 8402-1986 BS 4778:Part 1:1987, EN 28402:1991,ISO 8402-1986. Quality vocabulary. International terms
BS 6828:Part 1:1987, EN 21797:1989,ISO 1797:1985 BS 6828:Part 1:1987, EN 21797:1989,ISO 1797:1985. Dental rotary instruments. Specification for shanks
BS 6828:Part 2:1987, EN 22157:1989,ISO 2157:1984 BS 6828:Part 2:1987, EN 22157:1989,ISO 2157:1984. Dental rotary instruments. Specification for nominal sizes and designations
BS 6828:Part 3:1987, EN 23823-1:1991,ISO 3823-1:1986 BS 6828:Part 3:1987, EN 23823-1:1991,ISO 3823-1:1986. Dental rotary instruments. Specification for steel and carbide burs
BS 6828-4:1987, EN 23813-2:1991,ISO 3823-2:1986 BS 6828-4:1987, EN 23813-2:1991,ISO 3823-2:1986. Dental rotary instruments. Specification for steel and carbide finishing burs
BS 6828-5.1:1987, EN 26360-1:1989,ISO 6360-1:1985 BS 6828-5.1:1987, EN 26360-1:1989,ISO 6360-1:1985. Dental rotary instruments. Number coding system. Specification for general characteristics
BS 6828:Part 5:Section 5.2:1987, ISO 6360-2:1986 BS 6828:Part 5:Section 5.2:1987, ISO 6360-2:1986. Dental rotary instruments. Number coding system. Specification for shape and specific characteristics
BS 6828:Part 6:1987, EN 27711:1989,ISO 7711:1984 BS 6828:Part 6:1987, EN 27711:1989,ISO 7711:1984. Dental rotary instruments. Specification for diamond instruments
BS 6828-8.1:1987, EN 27787-1:1989,ISO 7787-1:1984 BS 6828-8.1:1987, EN 27787-1:1989,ISO 7787-1:1984. Dental rotary instruments. Cutters. Specification for steel laboratory cutters
BS 6828:Part 8:Section 8.2:1987, EN 27787-2:1990,ISO 7787-2:1984 BS 6828:Part 8:Section 8.2:1987, EN 27787-2:1990,ISO 7787-2:1984. Dental rotary instruments. Cutters. Specification for carbide laborat
BS 6828-9:1987, EN 28325:1990,ISO 8325:1985 BS 6828-9:1987, EN 28325:1990,ISO 8325:1985. Dental rotary instruments. Methods of test
BS EN 25199:1992, ISO 5199-1986 BS EN 25199:1992, ISO 5199-1986. Technical specifications for centrifugal pumps. Class II
BS 6837:1987, ISO 3394-1984 BS 6837:1987, ISO 3394-1984. Specification for plan dimensions of rigid rectangular transport packages with a modular relationship to 1200 mm x 1000 mm and 1200 mm x 800 mm
BS 1983-4:1987 BS 1983-4:1987. Chucks for machine tools and portable power tools. Specification of criteria to be stated affecting performance of power operated workholding chucks at speed
BS 5550-5.4.3:1987, ISO 162-1985 BS 5550-5.4.3:1987, ISO 162-1985. Cinematography. Common to more than one film gauge. Sound. Specification for positions and width dimensions of recording and reproduc
BS 1983-3:1987 BS 1983-3:1987. Chucks for machine tools and portable power tools. Specification for dimensions of collet pads for base jaws of power operated workholding chucks
BS 4887-2:1987 BS 4887-2:1987. Mortar admixtures. Specification for set retarding admixtures
BS 6100-1.3.3:1987 BS 6100-1.3.3:1987. Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works. Floors and ceilings
BS 4285-3.7:1987 BS 4285-3.7:1987. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumeration of coliform bacteria
BS 4285-3.9.1:1987 BS 4285-3.9.1:1987. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Detection of Salmonella. Reference
BS 4285-5.3:1987 BS 4285-5.3:1987. Microbiological examination for dairy purposes. Ancillary methods. Test for inhibitory substances
BS 4470:1987, ISO 2302-1985 BS 4470:1987, ISO 2302-1985. Method for evaluation of vulcanization characteristics of isobutene-isoprene rubber (IIR)
BS 6845:1987 BS 6845:1987. Method for evaluation of vulcanization characteristics of halogenated isobutene-isoprene rubber (BIIR and CIIR)
BS 476:Part 7:1987 BS 476:Part 7:1987. Fire tests on building materials and structures. Method for classification of the surface spread of flame of products
BS 476-13:1987, ISO 5657:1986 BS 476-13:1987, ISO 5657:1986. Fire tests on building materials and structures. Method of measuring the ignitability of products subjected to thermal irradiance
BS 903:Part A16:1987, ISO 1817-1985 BS 903:Part A16:1987, ISO 1817-1985. Physical testing of rubber. Determination of the effect of liquids
BS 1741-1:1987 BS 1741-1:1987. Methods for chemical analysis of liquid milk and cream. General introduction including preparation of samples
BS 1741:Part 3:1987, ISO 1211-1984 BS 1741:Part 3:1987, ISO 1211-1984. Methods for chemical analysis of liquid milk and cream. Determination of fat content of liquid milk
BS 1741-4:1987, ISO 2450-1985 BS 1741-4:1987, ISO 2450-1985. Methods for chemical analysis of liquid milk and cream. Determination of fat content of cream
BS 6808:Part 2:1987 BS 6808:Part 2:1987. Coordinate measuring machines. Methods for verifying performance
BS 6830:1987 BS 6830:1987. Specification for continuously hot-dip aluminium/zinc alloy coated cold rolled carbon steel flat products
BS 6606:1987, ISO 5500-1986 BS 6606:1987, ISO 5500-1986. Methods for sampling oilseed residues
BS M 66:1987, ISO 8479-1986 BS M 66:1987, ISO 8479-1986. Specification for dimensions of 'Q' clamps (centre-mounted clamps) for fluid systems
BS 1295:1987 BS 1295:1987. Code of practice for training in arc welding skills
BS EN 28318:1992, ISO 8318:1986 BS EN 28318:1992, ISO 8318:1986. Complete, filled transport packages. Methods for determination of resistance to sinusoidal variable frequency vibration
BS 4994:1987 BS 4994:1987. Specification for design and construction of vessels and tanks in reinforced plastics
BS 6849:1987, ISO 6973-1986 BS 6849:1987, ISO 6973-1986. Specification for drop-forged rivetless chains for conveyors
BS 6861-1:1987, ISO 1940-1:1986 BS 6861-1:1987, ISO 1940-1:1986. Mechanical vibration. Balance quality requirements of rigid rotors. Method for determination of permissible residual unbalance
BS 845-2:1987 BS 845-2:1987. Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids. Comprehensive procedure
BS 6491-2:1987 BS 6491-2:1987. Electro-sensitive safety systems for industrial machines. Specification for particular requirements for an electro-sensitive safety system incorporating a photoelectric
BS 6640:Part 1:1987 BS 6640:Part 1:1987. Guide to arrangements for DTE to DTE physical connection. General arrangements for DTE to DTE physical connection using V.24 and X.24 interchange circuits
BS 6640:Part 2:1987, ISO 8481-1986 BS 6640:Part 2:1987, ISO 8481-1986. Guide to arrangements for DTE to DTE physical connection. DTE to DTE physical connection using X.24 interchange circuits with DTE
BS 6843:Part 1:1987, ISO 8216/1-1986 BS 6843:Part 1:1987, ISO 8216/1-1986. Classification of petroleum fuels. Marine fuels
BS 5221:1987 BS 5221:1987. Specification for general purpose, metric module gear hobs
BS M 65:1987, ISO 8278-1986 BS M 65:1987, ISO 8278-1986. Specification for pressure compensated variable delivery hydraulic pumps
BS 6860:1987, ISO 5526-1986 BS 6860:1987, ISO 5526-1986. Nomenclature for cereals, pulses and other food grains
BS 6856:1987, ISO 2022-1986 BS 6856:1987, ISO 2022-1986. Specification for code extension techniques for United Kingdom 7-bit and 8-bit coded character sets
BS 391:1987, ISO 277:1983 BS 391:1987, ISO 277:1983. Specification for tung oil for paints and varnishes
BS 5540-5:1987, ISO 3938-1986 BS 5540-5:1987, ISO 3938-1986. Evaluating particulate contamination of hydraulic fluids. Method of reporting contamination analysis data
BS 5950:Part 5:1987 BS 5950:Part 5:1987. Structural use of steelwork in building. Code of practice for design of cold formed sections
BS 6068-2.31:1987, ISO 6333-1986 BS 6068-2.31:1987, ISO 6333-1986. Water quality. Physical, chemical and biochemical methods. Method for determination of manganese: formaldoxime spectrometric method
BS 4051:1987, ISO 1765-1986 BS 4051:1987, ISO 1765-1986. Method for determination of thickness of textile floor coverings
BS 4052:1987, ISO 2094-1986 BS 4052:1987, ISO 2094-1986. Method for determination of thickness loss of textile floor coverings under dynamic loading
BS 4939:1987, ISO 3416-1986 BS 4939:1987, ISO 3416-1986. Method for determination of thickness loss of textile floor coverings after prolonged heavy static loading
BS 5600-3.3:1987, ISO 7625-1983 BS 5600-3.3:1987, ISO 7625-1983. Powder metallurgical materials and products. Methods of testing sintered metal materials and products, excluding hardmetals. Preparatio
BS 6865:1987, IEC 60461:1986 BS 6865:1987, IEC 60461:1986. Specification for time and control codes for video tape recorders
BS 6866:Part 3:1987, ISO 7278/3-1986 BS 6866:Part 3:1987, ISO 7278/3-1986. Proving systems for meters used in dynamic measurement of liquid hydrocarbons. Methods for pulse interpolation
BS 302-1:1987 BS 302-1:1987. Stranded steel wire ropes. Specification for general requirements
BS 302-2:1987 BS 302-2:1987. Stranded steel wire ropes. Specification for ropes for general purposes
BS 302-3:1987 BS 302-3:1987. Stranded steel wire ropes. Specification for zinc coated ropes for ships
BS 302-4:1987 BS 302-4:1987. Stranded steel wire ropes. Specification for ropes for lifts
BS 302-5:1987 BS 302-5:1987. Stranded steel wire ropes. Specification for ropes for hauling purposes
BS 302-6:1987 BS 302-6:1987. Stranded steel wire ropes. Specification for ropes for mine hoisting
BS 5666-1:1987, EN 212:1986 BS 5666-1:1987, EN 212:1986. Methods of analysis of wood preservatives and treated timber. Guide to sampling and preparation of wood preservatives and treated timber for an
BS 6068:Part 2:Section 2.32:1987, ISO 8467-1986 BS 6068:Part 2:Section 2.32:1987, ISO 8467-1986. Water quality. Physical, chemical and biochemical methods. Method for the determination of permanganate
BS 6200-3.7.1:1987, EN 10177:1989,EU 177:1985 BS 6200-3.7.1:1987, EN 10177:1989,EU 177:1985. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of calciu
BS 6200-3.16.4:1987, EN 10181:1989,EU 181:1985 BS 6200-3.16.4:1987, EN 10181:1989,EU 181:1985. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of lead
BS AU 216-1:1987, ISO 7309-1985 BS AU 216-1:1987, ISO 7309-1985. Hydraulic brake systems using petroleum base brake fluids for road vehicles. Specification for petroleum base reference fluid
BS MA 104-1:1987, ISO 7222-1985 BS MA 104-1:1987, ISO 7222-1985. Series 2 shipborne barges. Specification for main dimensions
BS 6068:Part 1:Section 1.5:1987, ISO 6107/5-1986 BS 6068:Part 1:Section 1.5:1987, ISO 6107/5-1986. Water quality. Glossary. An additional 49 terms
BS EN ISO 8192:1995, BS 6068-5.7:1987,ISO 8192:1986 BS EN ISO 8192:1995, BS 6068-5.7:1987,ISO 8192:1986. Water quality. Test for the inhibition of oxygen consumption by activated sludge
BS 6755-2:1987 BS 6755-2:1987. Testing of valves. Specification for fire type-testing requirements
BS 6851:1987, ISO 7744-1986 BS 6851:1987, ISO 7744-1986. Method for preparing a statement of requirements for hydraulic fluid power filters
BS MA 87-3:1987, ISO 6764-1985 BS MA 87-3:1987, ISO 6764-1985. Series 1 shipborne barges. Specification for the arrangement, dimensions and method of test for lifting post castings
BS 6100-1.1:1987 BS 6100-1.1:1987. Glossary of building and civil engineering terms. General and miscellaneous. Types of building
BS 6100-6.5:1987 BS 6100-6.5:1987. Glossary of building and civil engineering terms. Concrete and plaster. Formwork
BS 6833-1:1987 BS 6833-1:1987. Apparatus using cordless attachments (excluding cellular radio apparatus) for connection to analogue interfaces of public switched telephone networks. Specification for
BS 5550-5.2.1:1987, ISO 8567:1986 BS 5550-5.2.1:1987, ISO 8567:1986. Cinematography. Common to more than one film gauge. Image areas. Specification for dimensions and locations of the maximum permissi
BS MA 105-1:1987, ISO 6765-1985 BS MA 105-1:1987, ISO 6765-1985. Series 3 shipborne barges. Specification for main dimensions
BS MA 105-2:1987, ISO 8303-1985 BS MA 105-2:1987, ISO 8303-1985. Series 3 shipborne barges. Specification for main operational and technical requirements
BS MA 105-3:1987, ISO 8304-1984 BS MA 105-3:1987, ISO 8304-1984. Series 3 shipborne barges. Specification for principal mating dimensions for the ventilating system
BS 733-2:1987 BS 733-2:1987. Pyknometers. Methods for calibration and use of pyknometers
BS 4264:1987 BS 4264:1987. Specification for envelopes for commercial, official and professional use
BS 6854-1:1987 BS 6854-1:1987. Code of practice for safeguarding woodworking machines. General recommendations
BS 6852:1987 BS 6852:1987. Specification for dimensions of housings for hydraulic cylinder piston rod wiper rings in reciprocating applications
BS 4592:Part 1:1987 BS 4592:Part 1:1987. Industrial type flooring, walkways and stair treads. Specification for open bar gratings
BS 5751:1987 BS 5751:1987. Specification for dimensions of housings for hydraulic seals for reciprocating applications
BS 6101-4:1987 BS 6101-4:1987. Machine tool ball screws. Method of calculation of static axial rigidity
BS CECC 90105:1987 BS CECC 90105:1987. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fusible link programmable bipolar read only memo
BS 1192-2:1987 BS 1192-2:1987. Construction drawing practice. Recommendations for architectural and engineering drawings
BS 1192-3:1987 BS 1192-3:1987. Construction drawing practice. Recommendations for symbols and other graphic conventions
BS 3919:1987 BS 3919:1987. Specification for technical tallow and animal grease
BS 5550-5.6.1:1987, ISO 6038-1985 BS 5550-5.6.1:1987, ISO 6038-1985. Cinematography. Common to more than one film gauge. Splices. Specification for dimensions and locations of splices for use on 70 mm
BS 5942-7:1987, IEC 60581-7:1981 BS 5942-7:1987, IEC 60581-7:1981. High fidelity audio equipment and systems; minimum performance requirements. Specification for loudspeakers
BS 6276:1987 BS 6276:1987. Specification for dimensions and identification code for mounting flanges and shafts ends for hydraulic fluid power pumps and motors
BS 6857:1987, ISO 4620-1986 BS 6857:1987, ISO 4620-1986. Specification for cadmium pigments for paints
BS 6901:1987 BS 6901:1987. Specification for rating and performance of air source heat pumps with electrically driven compressors
BS 6107:Part 2:1987, ISO 492-1986 BS 6107:Part 2:1987, ISO 492-1986. Rolling bearings: tolerances. Specification for tolerances of radial bearings
BS 6600-1:1987 BS 6600-1:1987. Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment. Specification for the outline dimensions of transformers and indu
BS 9925-02.0:1987, IEC 60723-3:1985,QC 250200:1985 BS 9925-02.0:1987, IEC 60723-3:1985,QC 250200:1985. Harmonized system of quality assessment for electronic components. Inductor and transformer cores
BS 3316-1:1987 BS 3316-1:1987. Incinerators. Specification for standard performance requirements for incineration plant for the destruction of hospital waste
BS 3316-4:1987 BS 3316-4:1987. Incinerators. Code of practice for the design, specification, installation and commissioning of incineration plant for the destruction of hospital waste
BS 684-2.27:1987 BS 684-2.27:1987. Methods of analysis of fats and fatty oils. Other methods. Determination of bleachability
BS 3316-2:1987 BS 3316-2:1987. Incinerators. Methods of test and calculation for the performance of incineration plant for the destruction of hospital waste
BS 3316-3:1987 BS 3316-3:1987. Incinerators. Method for specifying purchasers' requirements for incineration plant for the destruction of hospital waste
BS 4164:1987 BS 4164:1987. Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer
BS 5060:1987, IEC 60879:1986 BS 5060:1987, IEC 60879:1986. Specification for performance and construction of electric circulating fans and regulators
BS 5497:Part 1:1987, ISO 5725-1986 BS 5497:Part 1:1987, ISO 5725-1986. Precision of test methods. Guide for the determination of repeatability and reproducibility for a standard test method by inter-l
BS 1940:1987 BS 1940:1987. Specification for butanone (ethyl methyl ketone) for industrial use
BS 6875:1987, ISO 7839-1984 BS 6875:1987, ISO 7839-1984. Glossary of terms for and classification of knitting machines
BS 6870-2.1:1987, ISO 8558-1985 BS 6870-2.1:1987, ISO 8558-1985. Analysis of aluminium ores. Chemical methods. Method of preparation of pre-dried test samples
BS 6870-2.2:1987, ISO 8557-1985 BS 6870-2.2:1987, ISO 8557-1985. Analysis of aluminium ores. Chemical methods. Method for determination of hygroscopic moisture in analytical samples: gravimetric metho
BS 6870-2.3:1987, ISO 6606-1986 BS 6870-2.3:1987, ISO 6606-1986. Analysis of aluminium ores. Chemical methods. Method for determination of loss of mass at 1075°C: gravimetric method
BS 6870-2.4:1987, ISO 6607-1985 BS 6870-2.4:1987, ISO 6607-1985. Analysis of aluminium ores. Chemical methods. Method for determination of silicon content: combined gravimetric and spectrophotometric
BS 6870-2.5:1987, ISO 6609-1985 BS 6870-2.5:1987, ISO 6609-1985. Analysis of aluminium ores. Chemical methods. Method for determination of iron content: titrimetric method
BS 6870-2.6:1987, ISO 6994-1986 BS 6870-2.6:1987, ISO 6994-1986. Analysis of aluminium ores. Chemical methods. Method for determination of aluminium content: EDTA titrimetric method
BS 6870-2.7:1987, ISO 6995-1985 BS 6870-2.7:1987, ISO 6995-1985. Analysis of aluminium ores. Chemical methods. Method for determination of titanium content: spectrophotometric method
BS 6870-2.8:1987, ISO 8556-1986 BS 6870-2.8:1987, ISO 8556-1986. Analysis of aluminium ores. Chemical methods. Method for determination of phosphorus content: spectrophotometric method
BS 1683:1987 BS 1683:1987. Specification for coated aluminium foil for wrapping processed cheese
BS 3353:1987, ISO 5362-1986 BS 3353:1987, ISO 5362-1986. Specification for anaesthetic reservoir bags
PD 6516:1987 PD 6516:1987. Guide to guarding fires and heating appliances
BS CECC 90111:1987 BS CECC 90111:1987. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. MOS read/write static memories silicon monolithi
BS CECC 90113:1987 BS CECC 90113:1987. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. MOS ultra-violet light erasable electrically pro
BS 1132:1987 BS 1132:1987. Specification for automatic pipettes
BS 3059-1:1987 BS 3059-1:1987. Steel boiler and superheater tubes. Specification for low tensile carbon steel tubes without specified elevated temperature properties
BS 4832:1987, ISO 6072-1986 BS 4832:1987, ISO 6072-1986. Specification for compatibility between elastomeric materials and hydraulic fluids
BS 6874:1987, ISO 8115-1986 BS 6874:1987, ISO 8115-1986. Specification for dimensions and density of cotton bales
BS 1571:Part 1:1987, ISO 1217-1986 BS 1571:Part 1:1987, ISO 1217-1986. Specification for testing of positive displacement compressors and exhausters. Methods for acceptance testing
BS 6826:1987 BS 6826:1987. Specification for linoleum and cork carpet sheet and tiles
BS 6872:1987 BS 6872:1987. Specification for visual densities of diazo and vesicular second-generation microforms
BS 6844:1987 BS 6844:1987. Method for determination of the flat crush resistance of corrugating medium after laboratory fluting (CMT Concora Medium Test)
DD 156:1987 DD 156:1987. Method of test for bond strength of sprayed mineral coatings
BS 3601:1987 BS 3601:1987. Specification for carbon steel pipes and tubes with specified room temperature properties for pressure purposes
BS 6388-2:1987, ISO 5630-4:1986 BS 6388-2:1987, ISO 5630-4:1986. Accelerated ageing of paper and board. Method for dry heat treatment at 120°C or 150°C
BS 6388:Part 3:1987, ISO 5630/3-1986 BS 6388:Part 3:1987, ISO 5630/3-1986. Accelerated ageing of paper and board. Method for moist heat treatment at 80°C and 65% relative humidity
BS 8233:1987 BS 8233:1987. Code of practice for sound insulation and noise reduction for buildings
BS 4072-1:1987 BS 4072-1:1987. Wood preservation by means of copper/chromium/arsenic compositions. Specification for preservatives
BS 4072-2:1987 BS 4072-2:1987. Wood preservation by means of copper/chromium/arsenic compositions. Method for timber treatment
BS 6057-2:1987, ISO 123-1985 BS 6057-2:1987, ISO 123-1985. Rubber latices. Sampling
BS 6057-3.11:1987 BS 6057-3.11:1987. Rubber latices. Methods of test. Determination of viscosity of rubber latices
BS 6841:1987 BS 6841:1987. Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock
BS 6858:1987 BS 6858:1987. Specification for manually operated positioning devices and associated anchorage lines for use with industrial safety belts and harnesses
BS 6882:1987 BS 6882:1987. Guide for storage of raw solid natural and synthetic rubber
BS 6884:1987 BS 6884:1987. Recommendations for plan dimensions of unit loads
BS 8202:Part 1:1987 BS 8202:Part 1:1987. Coatings for fire protection of building elements. Code of practice for the selection and installation of sprayed mineral coatings
BS 417-2:1987 BS 417-2:1987. Specification for galvanized low carbon steel cisterns, cistern lids, tanks and cylinders. Metric units
BS 1747-9:1987, ISO 7996:1985 BS 1747-9:1987, ISO 7996:1985. Methods for measurement of air pollution. Determination of the mass concentration of nitrogen oxides in ambient air: chemiluminescence meth
BS QC 160101:1987, IEC 60255-19-1:1983 BS QC 160101:1987, IEC 60255-19-1:1983. Specification for harmonized system of quality assessment for electronic components. Electrical relays. Blank detail spec
BS CECC 90112:1987 BS CECC 90112:1987. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. MOS read/write dynamic memories silicon monolith
BS 5551-4.2.3:1987 BS 5551-4.2.3:1987. Fertilizers. Chemical analysis. Determination of phosphorus. Method for determination of phosphorus content (quinoline molybdophosphate gravimetric method)
BS 2G 232:1987 BS 2G 232:1987. Specification for electric cables for general airframe or equipment interconnect use (135°C), wrapped insulation
BS G 235:1987 BS G 235:1987. Specification for electric cables for general airframe or equipment interconnect use (150°C), wrapped insulation with silver plated conductors
BS G 236:1987 BS G 236:1987. Specification for electric cables for general airframe or equipment interconnect use (200°C), wrapped insulation with nickel plated conductors
BS 5884:1987 BS 5884:1987. Methods for determination of relative magnetic permeability of feebly magnetic materials
BS 6886:1987 BS 6886:1987. Specification for alumino-silicate refractories for use in coke ovens
BS G 238:1987 BS G 238:1987. Specification for electric cables for general airframe or equipment interconnect use (260°C), wrapped insulation with nickel plated conductors
BS 3144-28:1987 BS 3144-28:1987. Sampling and physical testing of leather. Method for measurement of thickness of surface coatings on leather
BS 4250:Part 1:1987 BS 4250:Part 1:1987. Liquefied petroleum gas. Specification for commercial butane and propane
BS 4267-0:1987 BS 4267-0:1987. Ammonium nitrate. General introduction
BS 4267-3:1987, ISO 2365-1972 BS 4267-3:1987, ISO 2365-1972. Ammonium nitrate. Method for measurement of pH value
BS 4267-4:1987 BS 4267-4:1987. Ammonium nitrate. Method for determination of sulphated ash
BS 4267-5:1987, ISO 2995-1974 BS 4267-5:1987, ISO 2995-1974. Ammonium nitrate. Method for determination of matter insoluble in water
BS 4267-6:1987 BS 4267-6:1987. Ammonium nitrate. Method for determination of water content
BS 4267-7:1987 BS 4267-7:1987. Ammonium nitrate. Methods for determination of nitrite content
BS 4267-8:1987 BS 4267-8:1987. Ammonium nitrate. Methods for determination of chloride content
BS 4267-9:1987 BS 4267-9:1987. Ammonium nitrate. Method for determination of sulphate content
BS EN 28474:1993, ISO 8474:1986 BS EN 28474:1993, ISO 8474:1986. Complete, filled transportpackages. Method for determination of resistance to immersion in water
BS 4936:1987 BS 4936:1987. Method of specifying styrene-acrylonitrile (SAN) moulding and extrusion materials
BS 6793:1987 BS 6793:1987. Specification for men's uniform shirts
BS 6864-1:1987, ISO 3822/1-1983 BS 6864-1:1987, ISO 3822/1-1983. Laboratory tests on noise emission from appliances and equipment intended for use in water supply installations. Method for measurement
BS 6864:Part 2:1987 BS 6864:Part 2:1987. Laboratory tests on noise emission from appliances and equipment intended for use in water supply installations. Method for mounting and operating draw-off tap
BS 6864:Part 3:1987 BS 6864:Part 3:1987. Laboratory tests on noise emission from appliances and equipment intended for use in water supply installations. Method for mounting and operating in-line valv
BS 6864:Part 4:1987 BS 6864:Part 4:1987. Laboratory tests on noise emission from appliances and equipment intended for use in water supply installations. Method for mounting and operating special appl
BS 6868:1987, EN 28879:1990,ISO 8879-1986 BS 6868:1987, EN 28879:1990,ISO 8879-1986. Specification for standard generalized markup language (SGML) for text and office systems
BS 6869:1987 BS 6869:1987. Code of practice for procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service
BS EN 28768:1993, ISO 8768:1986 BS EN 28768:1993, ISO 8768:1986. Complete, filled transport packages. Method for determination of resistance to damage by toppling
BS 5723:1987, ISO 2788-1986 BS 5723:1987, ISO 2788-1986. Guide to establishment and development of monolingual thesauri
BS 6043-2.8:1987, ISO 8723-1986 BS 6043-2.8:1987, ISO 8723-1986. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of oil content by
BS 6200-3.26.3:1987, EN 24829-1:1990,ISO 4829-1:1986 BS 6200-3.26.3:1987, EN 24829-1:1990,ISO 4829-1:1986. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determina
BS G 237:1987 BS G 237:1987. Specification for electric cables for general airframe or equipment interconnect use (200°C), extruded insulation with nickel plated conductors
BS 5258:Part 4:1987 BS 5258:Part 4:1987. Safety of domestic gas appliances. Specification for fanned-circulation ducted-air heaters
BS 2554:1987 BS 2554:1987. Specification for Westergren tubes and support for the measurement of erythrocyte sedimentation rate
BS 903:Part A37:1987 BS 903:Part A37:1987. Physical testing of rubber. Determination of adhesion to and corrosion of metals
BS 4061-1:1987, IEC 60133:1985 BS 4061-1:1987, IEC 60133:1985. Dimensions of pot-cores made of magnetic oxides and associated parts. Specification for IEC pot-core range
BS 4061:Part 2:1987 BS 4061:Part 2:1987. Dimensions of pot-cores made of magnetic oxides and associated parts. Specification for British pot-core range
BS 6054:Part 4:1987, ISO 6196/4-1987 BS 6054:Part 4:1987, ISO 6196/4-1987. Glossary of terms for micrographics. Materials and packaging
BS 6538-3:1987, ISO 5636-5:1986 BS 6538-3:1987, ISO 5636-5:1986. Air permeance of paper and board. Method for determination of air permeance using the Gurley apparatus
BS 6890:1987, ISO 5634-1986 BS 6890:1987, ISO 5634-1986. Method for determination of grease resistance of paper and board
BS 63-1:1987 BS 63-1:1987. Road aggregates. Specification for single-sized aggregate for general purposes
BS 63-2:1987 BS 63-2:1987. Road aggregates. Specification for single-sized aggregate for surface dressing
BS 405:1987 BS 405:1987. Specification for uncoated expanded metal carbon steel sheets for general purposes
BS 1251:1987 BS 1251:1987. Specification for open-fireplace components
BS 6463:Part 3:1987 BS 6463:Part 3:1987. Quicklime, hydrated lime and natural calcium carbonate. Methods of test for physical properties of quicklime
BS 6463:Part 4:1987 BS 6463:Part 4:1987. Quicklime, hydrated lime and natural calcium carbonate. Methods of test for physical properties of hydrated lime and lime putty
BS 6840-14:1987, IEC 60268-14:1980 BS 6840-14:1987, IEC 60268-14:1980. Sound system equipment. Guide for circular and elliptical loudspeakers; outer frame diameters and mounting dimensions
BS 6850:1987 BS 6850:1987. Specification for ventilatory resuscitators
BS 8007:1987 BS 8007:1987. Code of practice for design of concrete structures for retaining aqueous liquids
BS CECC 50000:1987 BS CECC 50000:1987. Harmonized system of quality assessment for electronic components. Generic specification: discrete semiconductor devices
BS 1435:Part 1:1987 BS 1435:Part 1:1987. Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
BS 3225:Part 2:1987, ISO 8116-3:1986 BS 3225:Part 2:1987, ISO 8116-3:1986. Beams for warping, sizing and weaving of textile yarns. Specification for main dimensions of, and terminology for, weaver's b
BS 6842:1987 BS 6842:1987. Guide to measurement and evaluation of human exposure to vibration transmitted to the hand
BS 8204-1:1987 BS 8204-1:1987. Screeds, bases and in-situ floorings. Code of practice for concrete bases and screeds to receive in-situ floorings
BS 8204-2:1987 BS 8204-2:1987. Screeds, bases and in-situ floorings. Code of practice for concrete wearing surfaces
DD 171:1987 DD 171:1987. Guide to specifying performance requirements for hinged or pivoted doors (including test methods)
BS EN 190106:1994 BS EN 190106:1994. Specification for harmonized system of quality assessment for electronic components. Family specification. TTL advanced low power SCHOTTKY digital integrated circu
BS QC 750005:1987, IEC 60747-3-2:1986 BS QC 750005:1987, IEC 60747-3-2:1986. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank
BS 6742-2:1987, EN 50053-1:1987 BS 6742-2:1987, EN 50053-1:1987. Electrostatic painting and finishing equipment using flammable materials. Specification for selection, installation and use of hand-hel
BS 1394-2:1987 BS 1394-2:1987. Stationary circulation pumps for heating and hot water service systems. Specification for physical and performance requirements
BS 6898:1987 BS 6898:1987. Specification for glass centrifuge tubes for general laboratory use
BS 6905:1987 BS 6905:1987. Method for estimation of concentration of disinfectants used in 'dirty' conditions in hospitals by the modified Kelsey-Sykes test
BS QC 160100:1987, IEC 60255-19:1983 BS QC 160100:1987, IEC 60255-19:1983. Harmonized system of quality assessment for electronic components. Electrical relays. Sectional specification: electromechani
PP 7317:1987 PP 7317:1987. Ergonomics. Standards and guidelines for designers
BS 684-1.5:1987 BS 684-1.5:1987. Methods of analysis of fats and fatty oils. Physical methods. Determination of cloud point
BS 1297:1987 BS 1297:1987. Specification for tongued and grooved softwood flooring
BS 3488:1987 BS 3488:1987. Specification for technical anhydrous lanolin
BS 5660-1:1987, ISO 3081-1986 BS 5660-1:1987, ISO 3081-1986. Methods of sampling iron ores. Manual method of increment sampling
BS 5661:1987, ISO 3083-1986 BS 5661:1987, ISO 3083-1986. Method for preparation of samples of iron ores by manual means
BS 5662-1:1987, ISO 3084-1986 BS 5662-1:1987, ISO 3084-1986. Evaluation of sampling methods for iron ores. Experimental methods for evaluation of quality variation
BS 5662-2:1987, ISO 3085-1986 BS 5662-2:1987, ISO 3085-1986. Evaluation of sampling methods for iron ores. Experimental methods for checking the precision of sampling
BS 5662-3:1987, ISO 3086-1986 BS 5662-3:1987, ISO 3086-1986. Evaluation of sampling methods for iron ores. Experimental methods for checking the bias of sampling
BS 5663-2:1987, ISO 4701-1985 BS 5663-2:1987, ISO 4701-1985. Methods of testing iron ores. Determination of size distribution by sieving
BS 5724:Part 2:Section 2.7:1987, IEC 60601-2-7:1987 BS 5724:Part 2:Section 2.7:1987, IEC 60601-2-7:1987. Medical electrical equipment. Particular requirements for safety. Specification for high-voltag
BS QC 750001:1986, IEC 60747-3-1:1986 BS QC 750001:1986, IEC 60747-3-1:1986. Specification for harmonized system of quality assessment for electronic components. Semiconductor discrete devices. Blank
BS EN 190107:1994 BS EN 190107:1994. Specification for harmonized system of quality assessment for electronic components. Family specification. TTL FAST digital integrated circuits series 54 F, 74 F
BS 4999-0:1987 BS 4999-0:1987. General requirements for rotating electrical machines. General introduction and information on other Parts
BS 6840:Part 4:1987, IEC 60268-4:1972 BS 6840:Part 4:1987, IEC 60268-4:1972. Sound system equipment. Methods for specifying and measuring the characteristics of microphones
BS 1133-16:1987 BS 1133-16:1987. Packaging code. Adhesives for packaging
BS 1902:Part 3:Section 3.14:1987 BS 1902:Part 3:Section 3.14:1987. Methods of testing refractory materials. General and textural properties. Determination of hydration tendency (methods 1902-314)
BS 6100-1.5.2:1987 BS 6100-1.5.2:1987. Glossary of building and civil engineering terms. General and miscellaneous. Operations. Associated plant and equipment. Jointing
BS 6159-1:1987 BS 6159-1:1987. Polyvinyl chloride boots. Specification for general and industrial lined or unlined boots
BS 5793-4:1987, IEC 60534-4:1982 BS 5793-4:1987, IEC 60534-4:1982. Industrial-process control valves. Specification for inspection and routine testing
BS 6894:1987 BS 6894:1987. Specification for jute hessian tubing
BS 6867:1987 BS 6867:1987. Code of practice for maintenance of electrical switchgear for voltages above 36 kV
BS 5350-0:1987 BS 5350-0:1987. Methods of test for adhesives. General introduction
BS 6902-2:1987, ISO 5841/2-1986 BS 6902-2:1987, ISO 5841/2-1986. Cardiac pacemakers. Method for reporting the clinical performance of populations of pulse generators
BS 4656-35:1987, ISO 6155-2:1986 BS 4656-35:1987, ISO 6155-2:1986. Accuracy of machine tools and methods of test. Specification for capstan, turret and automatic lathes, single spindle type less than
BS 6091-2:1987, IEC 60667-2:1982 BS 6091-2:1987, IEC 60667-2:1982. Vulcanized fibre for electrical purposes. Methods of test
BS 6889:1987 BS 6889:1987. Specification for generating racks for synchronous belt drive pulleys
BS 5M 23:1987, ISO 12-1987 BS 5M 23:1987, ISO 12-1987. Specification for an identification scheme for pipelines
BS 6057:Part 3:Section 3.10:1987, ISO 1409-1983 BS 6057:Part 3:Section 3.10:1987, ISO 1409-1983. Rubber latices. Methods of test. Determination of surface tension
BS 6246:Part 1:1987 BS 6246:Part 1:1987. Industrial laundry machinery. Methods for the assessment of the effect of rotary washing machines on textiles
BS CECC 40302:1978 BS CECC 40302:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed precision resistors (Assessment level F)
BS 684:Part 2:Section 2.14:1987, ISO 3960-1977 BS 684:Part 2:Section 2.14:1987, ISO 3960-1977. Methods of analysis of fats and fatty oils. Other methods. Determination of peroxide value
BS 4725:1987, ISO 276:1981 BS 4725:1987, ISO 276:1981. Specification for linseed stand oil for paints and varnishes
BS 6579-8:1987 BS 6579-8:1987. Safety fences and barriers for highways. Specification for concrete safety barriers
BS 6840-6:1987, IEC 60268-6:1971 BS 6840-6:1987, IEC 60268-6:1971. Sound system equipment. Methods for specifying and measuring the characteristics of auxiliary passive elements
BS 5424-2:1987 BS 5424-2:1987. Low-voltage controlgear. Specification for semiconductor contactors (solid state contactors)
BS 6897-1:1987, ISO 7626-1:1986 BS 6897-1:1987, ISO 7626-1:1986. Experimental determination of mechanical mobility. Specification for transducers
BS 3172:1987 BS 3172:1987. Specification for screw threads for spectacle frames
BS 6068-2.33:1987, ISO 7150-2:1986 BS 6068-2.33:1987, ISO 7150-2:1986. Water quality. Physical, chemical and biochemical methods. Method for the determination of ammonium: automated spectrometric meth
BS 6904:1987, IEC 60859:1986 BS 6904:1987, IEC 60859:1986. Guide for cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
BS CECC 52000:1987 BS CECC 52000:1987. Harmonized system of quality assessment for electronic components. Generic specification: mercury wetted change-over contact units, mechanically biased
BS 3181-1:1987 BS 3181-1:1987. Methods for determination of cotton fibre properties by the airflow method. Determination of micronaire value by the single compression airflow method
BS 4422-1:1987, ISO 8421-1:1986 BS 4422-1:1987, ISO 8421-1:1986. Glossary of terms associated with fire. General terms and phenomena of fire
BS 5551-3.4:1987, ISO 5313-1986 BS 5551-3.4:1987, ISO 5313-1986. Fertilizers. Physical properties. Method for determination of oil retention of high nitrogen content, straight ammonium nitrate fertili
BS 6840-9:1987, IEC 60268-9:1977 BS 6840-9:1987, IEC 60268-9:1977. Sound system equipment. Methods for specifying and measuring the characteristics of artificial reverberation, time delay and frequenc
BS 6917:1987, ISO 7384:1986 BS 6917:1987, ISO 7384:1986. Method for corrosion testing in artificial atmospheres: general principles
BS 6879:1987 BS 6879:1987. Specification for codes for the representation of names of counties and similar areas
BS 4651-0:1987 BS 4651-0:1987. Ammonia solution. Methods for sampling
BS 6859-1:1987 BS 6859-1:1987. Operating tables. Specification for mobile general operating tables
BS 6859-2:1987 BS 6859-2:1987. Operating tables. Specification for fixed-pedestal general operating tables
PD 6518:1987 PD 6518:1987. Prefabricated temporary road marking materials for use at road works
BS 1369-1:1987 BS 1369-1:1987. Steel lathing for internal plastering and external rendering. Specification for expanded metal and ribbed lathing
BS 3936:Part 9:1987 BS 3936:Part 9:1987. Nursery stock. Specification for bulbs, corms and tubers
BS 4161-8:1987 BS 4161-8:1987. Gas meters. Specification for electronic volume correctors
BS 4656-36:1987, ISO 8636-1:1987 BS 4656-36:1987, ISO 8636-1:1987. Accuracy of machine tools and methods of test. Specification for plano-milling machines, portal type
BS 6068-6.4:1987, ISO 5667-4:1987 BS 6068-6.4:1987, ISO 5667-4:1987. Water quality. Sampling. Guidance on sampling from lakes, natural and man-made
BS EN 60094-4:1994, BS 6288-4:1995,IEC 60094-4:1986 BS EN 60094-4:1994, BS 6288-4:1995,IEC 60094-4:1986. Magnetic tape sound recording and reproducing systems. Mechanical magnetic tape properties
BS 6789-3.2:1987 BS 6789-3.2:1987. Apparatus with one or more particular functions for connection to the British Telecommunications public switched telephone network. Apparatus with auto-calling, auto
BS 6893:Part 2:1987, IEC 60684-2:1984 BS 6893:Part 2:1987, IEC 60684-2:1984. Flexible insulating sleeving for electrical purposes. Methods of test
DD 173:1987 DD 173:1987. Specification for non-calibrated long link steel chain for general engineering purposes
BS F 132:1987 BS F 132:1987. Specification for braided nylon cord with specified dimensional stability for aerospace purposes
BS 1727:1987 BS 1727:1987. Specification for motors for battery operated vehicles
BS 2011:Part 2.1Kb:1987, IEC 60068-2-52:1984 BS 2011:Part 2.1Kb:1987, IEC 60068-2-52:1984. Environmental testing. Tests. Test Kb. Salt mist, cyclic (sodium chloride solution)
BS 2724:1987 BS 2724:1987. Specification for sun glare eye protectors for general use
BS 4548:1987 BS 4548:1987. Specification for synchronous belt drives for industrial applications
BS 5724:Part 2:Section 2.22:1987 BS 5724:Part 2:Section 2.22:1987. Medical electrical equipment. Particular requirements for safety. Specification for general operating tables
BS 6068:Part 1:Section 1.1:1987, ISO 6107-1:1986 BS 6068:Part 1:Section 1.1:1987, ISO 6107-1:1986. Water quality. Glossary. Terms relating to types of water, and treatment and storage of waste water
BS 6068:Part 1:Section 1.6:1987, ISO 6107/6-1986 BS 6068:Part 1:Section 1.6:1987, ISO 6107/6-1986. Water quality. Glossary. An additional 42 terms
BS 1474:1987 BS 1474:1987. Specification for wrought aluminium and aluminium alloys for general engineering purposes: bars, extruded round tubes and sections
BS 3602-1:1987 BS 3602-1:1987. Specification for steel pipes and tubes for pressure purposes: carbon and carbon manganese steel with specified elevated temperature properties. Specification for seamle
BS 6900:1987, ISO 150:1980 BS 6900:1987, ISO 150:1980. Specification for raw, refined and boiled linseed oils for paints and varnishes
BS 1042:Part 1:Section 1.5:1987 BS 1042:Part 1:Section 1.5:1987. Measurement of fluid flow in closed conduits. Pressure differential devices. Guide to the effect of departure from the conditions speci
BS 5660-2:1987, ISO 3082-1987 BS 5660-2:1987, ISO 3082-1987. Methods of sampling iron ores. Mechanical method of increment sampling and sample preparation
BS 5663:Part 1:1987, ISO 3087-1987 BS 5663:Part 1:1987, ISO 3087-1987. Methods of testing iron ores. Determination of moisture content
BS 6513-5:1987 BS 6513-5:1987. Wideband cabled distribution systems. Recommendations for one-way and interactive data services
BS 5752-11:1987, ISO 8460-1987 BS 5752-11:1987, ISO 8460-1987. Methods of test for coffee and coffee products. Instant coffee: determination of free-flow and compacted bulk densities
BS 1743-16.3:1987, ISO 8151:1987 BS 1743-16.3:1987, ISO 8151:1987. Methods for analysis of dried milk and dried milk products. Determination of nitrate and nitrite contents. Screening method for nitra
BS 1797:1987 BS 1797:1987. Schedule for tables for use in the calibration of volumetric glassware
BS 3867:1987 BS 3867:1987. Method of specifying outside diameters and pressure ratings for pipe of thermoplastics materials (inch series)
BS 5045-6:1987 BS 5045-6:1987. Transportable gas containers. Specification for seamless containers of less than 0.5 litre water capacity
BS 5817-16:1987, IEC 60574-16:1987 BS 5817-16:1987, IEC 60574-16:1987. Audio-visual, video and television equipment and systems. Specification for labelling for educational audio cassettes
BS 6906:Part 1:1987 BS 6906:Part 1:1987. Methods of test for geotextiles. Determination of the tensile properties using a wide width strip
BS 235:1987 BS 235:1987. Specification for gears for electric traction
BS 1344-10:1987, ISO 2743:1986 BS 1344-10:1987, ISO 2743:1986. Methods of testing vitreous enamel finishes. Determination of resistance to condensing hydrochloric acid vapour
BS 1344-20:1987, ISO 8289-1986 BS 1344-20:1987, ISO 8289-1986. Methods of testing vitreous enamel finishes. Low voltage test for detecting and locating defects
BS 2092:1987 BS 2092:1987. Specification for eye-protectors for industrial and non-industrial uses
BS 976:1987 BS 976:1987. Schedule for density-composition tables for aqueous solutions of hydrochloric acid
BS EN ISO 3696:1995 BS EN ISO 3696:1995. Water for analytical laboratory use. Specification and test methods
BS 2003-1:1987, EN 209:1986 BS 2003-1:1987, EN 209:1986. Mild steel drums (light duty: removable heads). Specification for drums with a total capacity of 213 litres
BS 4559-5.1:1987, ISO 6145-1:1986 BS 4559-5.1:1987, ISO 6145-1:1986. Methods for preparation of calibration gas mixtures. Dynamic volumetric methods. Review of methods of calibration
BS 4559-5.3:1987, ISO 6145-3-1986 BS 4559-5.3:1987, ISO 6145-3-1986. Methods for preparation of calibration gas mixtures. Dynamic volumetric methods. Periodic injections into a flowing gas stream
BS 4559-5.4:1987, ISO 6145-4:1986 BS 4559-5.4:1987, ISO 6145-4:1986. Methods for preparation of calibration gas mixtures. Dynamic volumetric methods. Continuous injection method
BS 4559-5.6:1987, ISO 6145-6:1986 BS 4559-5.6:1987, ISO 6145-6:1986. Methods for preparation of calibration gas mixtures. Dynamic volumetric methods. Sonic orifices
BS 5242-1:1987 BS 5242-1:1987. Tubes for fluid power cylinder barrels. Specification for steel tubes with specially finished surfaces
BS 6617-2:1987 BS 6617-2:1987. Determination of decarburization in steel. Methods for determining decarburization by chemical and spectrographic analysis techniques
BS 4185-14:1987 BS 4185-14:1987. Machine tool components. Method for determination of the pilot diameter of 60° centre holes
BS 6057-3.14:1987, ISO 2006-1985 BS 6057-3.14:1987, ISO 2006-1985. Rubber latices. Methods of test. Determination of high-speed mechanical stability of synthetic rubber latices
BS 2775:1987 BS 2775:1987. Specification for rubber stoppers and tubing for general laboratory use
BS 4215-2:1987 BS 4215-2:1987. Resistance spot welding electrodes, electrode holders and ancillary equipment. Specification for straight resistance spot welding electrodes
BS 4215-6:1987 BS 4215-6:1987. Resistance spot welding electrodes, electrode holders and ancillary equipment. Specification for electrode adaptors, female taper 1:10
BS 4215-7:1987 BS 4215-7:1987. Resistance spot welding electrodes, electrode holders and ancillary equipment. Specification for male electrode caps
BS 6248-11:1987, ISO 8195:1987 BS 6248-11:1987, ISO 8195:1987. Caseins and caseinates. Method for determination of nitrate and nitrite contents
BS 799-5:1987 BS 799-5:1987. Oil burning equipment. Specification for oil storage tanks
BS 2485:1987 BS 2485:1987. Specification for tee slots, tee bolts, tee nuts and tenons
BS 3731:1987 BS 3731:1987. Specification for vee blocks
BS 6057-3.8:1987, ISO 706-1985 BS 6057-3.8:1987, ISO 706-1985. Rubber latices. Methods of test. Determination of coagulum content (sieve residue)
BS 753:1987 BS 753:1987. Schedule for density-composition tables for aqueous solutions of sulphuric acid
BS 975:1987 BS 975:1987. Schedule for density-composition tables for aqueous solutions of nitric acid
BS 8005:Part 0:1987 BS 8005:Part 0:1987. Sewerage. Introduction and guide to data sources and documentation
BS 8005-1:1987 BS 8005-1:1987. Sewerage. Guide to new sewerage construction
BS 8005-2:1987 BS 8005-2:1987. Sewerage. Guide to pumping stations and pumping mains
BS 8005-4:1987 BS 8005-4:1987. Sewerage. Guide to design and construction of outfalls
BS 5724:Part 2:Section 2.8:1987, IEC 60601-2-8:1987 BS 5724:Part 2:Section 2.8:1987, IEC 60601-2-8:1987. Medical electrical equipment. Particular requirements for safety. Specification for therapeutic
BS 6224:1987 BS 6224:1987. Guide to design structure diagrams for use in program design and other logic applications
BS 5369:1987, EN 43:1985 BS 5369:1987, EN 43:1985. Methods of testing doors; behaviour under humidity variations of door leaves placed in successive uniform climates
BS AU 209-2:1988 BS AU 209-2:1988. Vehicle security. Specification for security systems against theft of in-car equipment for entertainment and communication purposes
BS AU 209-3:1988 BS AU 209-3:1988. Vehicle security. Specification for security marking of glazing for passenger cars and car derived vehicles
BS 5310:Part 3A:1988 BS 5310:Part 3A:1988. Specification. Hand crimping tools for the termination of electrical cables and wires for low frequency and radio frequency applications. Specification for h
BS 6909:1988 BS 6909:1988. Method for generation and counting of the airborne linting propensity of fabrics in the dry state
BS 8010-2.4:1988 BS 8010-2.4:1988. Code of practice for pipelines. Pipelines on land: design, construction and installation. Prestressed concreted pressure pipelines
BS 9930:Part 03.0:1988, IEC 60384-4:1985,QC 300300:1985 BS 9930:Part 03.0:1988, IEC 60384-4:1985,QC 300300:1985. Harmonized system of quality assessment for electronic components. Fixed capacitors for
BS 5929-5:1988, ISO 8588-1987 BS 5929-5:1988, ISO 8588-1987. Methods for sensory analysis of food. 'A'-'not A' test
BS AU 222:1988, ISO 7629:1987 BS AU 222:1988, ISO 7629:1987. Method of evaluating surface and material flaws of disc brake pads after testing
BS 576-2:1988 BS 576-2:1988. Acetic acid for industrial use. Methods of test for acetic acid
BS AU 219:1988, ISO 8755:1986 BS AU 219:1988, ISO 8755:1986. Specification for dimensions of 40 mm drawbar couplings between commercial road vehicles and trailers
BS AU 220:1988, ISO 1102:1986 BS AU 220:1988, ISO 1102:1986. Specification for dimensions of 50 mm drawbar couplings between commercial road vehicles and trailers
BS 318:1988, ISO 4621:1986 BS 318:1988, ISO 4621:1986. Specification for chrome oxide green pigments for paints
BS 4784-3:1988, ISO 6741-3:1987 BS 4784-3:1988, ISO 6741-3:1987. Methods for determination of commercial mass of consignments of textiles. Specimen cleaning procedures
BS 6932:1988 BS 6932:1988. Method for measurement of the effective focal spot size of mini-focus and micro-focus X-ray tubes used for industrial radiography
BS 4285:Part 3:Section 3.8:1988 BS 4285:Part 3:Section 3.8:1988. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumerat
BS 3762-3.24:1988 BS 3762-3.24:1988. Analysis of formulated detergents. Quantitative test methods. Method for determination of low molecular mass alcohols content
BS 4784-1:1988, ISO 6741-1:1987 BS 4784-1:1988, ISO 6741-1:1987. Methods for determination of commercial mass of consignments of textiles. Mass determination and calculations
BS 6467-2:1988 BS 6467-2:1988. Electrical apparatus with protection by enclosure for use in the presence of combustible dusts. Guide to selection, installation and maintenance
BS AU 214-3:1988, ISO 7647-1986 BS AU 214-3:1988, ISO 7647-1986. Gearbox flanges. Specification for dimensions for type S gearbox flanges for commercial vehicles and buses
BS AU 218:1987 BS AU 218:1987. Specification for automotive synchronous belt drives
BS A 298:1988, ISO 8642:1986 BS A 298:1988, ISO 8642:1986. Methods of test for self-locking nuts with maximum operating temperature greater than 425°C
BS 903-A9:1988 BS 903-A9:1988. Physical testing of rubber. Determination of abrasion resistance
BS 3254-1:1988 BS 3254-1:1988. Seat belt assemblies for road vehicles. Specification for restraining devices for adults
BS 4784-2:1988, ISO 6741-2:1987 BS 4784-2:1988, ISO 6741-2:1987. Methods for determination of commercial mass of consignments of textiles. Methods for obtaining laboratory samples
BS 5271:1988, EN 50010:1987 BS 5271:1988, EN 50010:1987. Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Methods for measuring the operating
BS 5529:1988, EN 50008:1987 BS 5529:1988, EN 50008:1987. Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form A, for direct current, 3 or 4 t
BS 5683:1988, EN 50025:1987 BS 5683:1988, EN 50025:1987. Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form C, for direct current, 3 or 4 t
BS 5684:1988, EN 50026:1987 BS 5684:1988, EN 50026:1987. Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form D, for direct current, 3 or 4 t
BS 6120:1988, EN 50036:1987 BS 6120:1988, EN 50036:1987. Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form A, for alternating current, 2 t
BS 6122:1988, EN 50037:1987 BS 6122:1988, EN 50037:1987. Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form C, for alternating current, 2 t
BS 6123:1988, EN 50038:1987 BS 6123:1988, EN 50038:1987. Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form D, for alternating current, 2 t
BS 6227:1988, EN 50040:1987 BS 6227:1988, EN 50040:1987. Specification for low-voltage switchgear and controlgear for industrial use. Inductive proximity switches. Form A, for direct current, 2 termin
BS 6942:Part 1:1988 BS 6942:Part 1:1988. Design and construction of small kits for oxy-fuel gas welding and allied processes. Specification for kits using one or more non-refillable gas containers for
DD 108:1988 DD 108:1988. Open Systems Interconnection service conventions (ISO/TR 8509)
BS 6568:Part 1:1988, EN 27498:1989,ISO 7498-1984,ISO 7498:1984/Add. 1:1987 BS 6568:Part 1:1988, EN 27498:1989,ISO 7498-1984,ISO 7498:1984/Add. 1:1987. Reference model of open systems interconnection.
BS 6960:1988, ISO 8326:1987 BS 6960:1988, ISO 8326:1987. Open Systems Interconnection: basic connection-oriented session service definition
BS 1743-3:1988, ISO 8156:1987 BS 1743-3:1988, ISO 8156:1987. Methods for analysis of dried milk and dried milk products. Determination of insolubility index
BS 1902:Part 2:Section 2.1:1988 BS 1902:Part 2:Section 2.1:1988. Methods of testing refractory materials. Chemical analysis (wet methods). Chemical analysis of refractories containing silica and/or al
BS 4870:Part 4:1988 BS 4870:Part 4:1988. Specification for approval testing of welding procedures. Specification for automatic fusion welding of metallic materials, including welding operator approval
BS 6349-2:1988 BS 6349-2:1988. Maritime structures. Design of quay walls, jetties and dolphins
BS 1743-20:1988, ISO 8070:1987 BS 1743-20:1988, ISO 8070:1987. Methods for analysis of dried milk and dried milk products. Determination of sodium and potassium contents of dried milk
BS 5293:Part 12:1988, ISO 6810-1985 BS 5293:Part 12:1988, ISO 6810-1985. Sampling and testing carbon black for use in the rubber industry. Methods for determination of surface area by surfactant adsor
BS 5815-2:1988 BS 5815-2:1988. Sheets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector. Specification for towels and n
BS 6100-2.4.2:1988 BS 6100-2.4.2:1988. Glossary of building and civil engineering terms. Civil engineering. Highway, railway and airport engineering. Railway engineering
BS 6961:1988, ISO 8327:1987 BS 6961:1988, ISO 8327:1987. Open Systems Interconnection: basic connection-oriented session protocol specification
BS 576-1:1988 BS 576-1:1988. Acetic acid for industrial use. Specification for acetic acid
BS EN ISO 8401:1995 BS EN ISO 8401:1995. Metallic coatings. Review of methods of measurement of ductility
BS 2G 191:1988 BS 2G 191:1988. Specification for lighting for aircraft indicators using integral filament lamps
BS EN ISO 787-15:1995 BS EN ISO 787-15:1995. General methods of test for pigments and extenders. Comparison of resistance to light of coloured pigments of similar types
BS EN ISO 787-16:1995 BS EN ISO 787-16:1995. General methods of test for pigments and extenders. Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of c
BS EN ISO 787-24:1995 BS EN ISO 787-24:1995. General methods of test for pigments and extenders. Determination of relative tinting strength of coloured pigments and relative scattering power of white
BS 6935-5:1988, ISO 7176-5:1986 BS 6935-5:1988, ISO 7176-5:1986. Wheelchair tests. Methods for determination of overall dimensions, mass and turning space
PP 7302:1987 PP 7302:1987. Compendium of British Standards for design and technology in schools
BS 6843-2:1988, ISO 8216-2:1986 BS 6843-2:1988, ISO 8216-2:1986. Classification of petroleum fuels. Gas turbine fuels for industrial and marine applications
BS AU 215-3:1988, ISO 7707-1986 BS AU 215-3:1988, ISO 7707-1986. Power take offs (PTOs). Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles
BS 5293-10:1988, ISO 1304:1985 BS 5293-10:1988, ISO 1304:1985. Sampling and testing carbon black for use in the rubber industry. Method for determination of iodine adsorption number
BS 6413-8:1988, ISO 6743-8:1987 BS 6413-8:1988, ISO 6743-8:1987. Lubricants, industrial oils and related products (class L). Classification for family R (temporary protection against corrosion)
BS 6843-0:1988, ISO 8216-0:1986 BS 6843-0:1988, ISO 8216-0:1986. Classification of petroleum fuels. General classification
BS 6924:1988, ISO 6251-1982 BS 6924:1988, ISO 6251-1982. Method for determination of corrosiveness of liquefied petroleum gases to copper
BS 6936:1988, ISO 7930-1986 BS 6936:1988, ISO 7930-1986. Method for designation of types of wheelchair
BS 6954-2:1988, ISO 3443-2:1979 BS 6954-2:1988, ISO 3443-2:1979. Tolerances for building. Recommendations for statistical basis for predicting fit between components having a normal distribution of si
BS 2G 202:1988 BS 2G 202:1988. Specification for design and performance requirements for airframe-fit electrical connectors for d.c. and low frequency a.c. applications
BS CECC 90200:1988 BS CECC 90200:1988. Harmonized system of quality assessment for electronic components: sectional specification: analogue monolithic integrated circuits
BS 669:Part 2:1988 BS 669:Part 2:1988. Flexible hoses, end fittings and sockets for gas burning appliances. Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for c
BS 1619-2:1988 BS 1619-2:1988. Re-usable hypodermic syringes for insulin injection. Specification for syringes for use with insulin of strength 100 units per millilitre
BS 3521-3:1988, ISO 8320-1986 BS 3521-3:1988, ISO 8320-1986. Terms relating to ophthalmic lenses and spectacle frames. Glossary of terms and symbols relating to contact lenses
BS 4585-4:1988, ISO 940-1979 BS 4585-4:1988, ISO 940-1979. Methods of test for spices and condiments. Determination of alcohol-soluble extract
BS 5070-1:1988 BS 5070-1:1988. Engineering diagram drawing practice. Recommendations for general principles
BS 5266-1:1988 BS 5266-1:1988. Emergency lighting. Code of practice for the emergency lighting of premises other than cinemas and certain other specified premises used for entertainment
BS 5833:1988 BS 5833:1988. Scheme for labelling of footwear
BS 6843-3:1988, ISO 8216-3:1987 BS 6843-3:1988, ISO 8216-3:1987. Classification of petroleum fuels. Liquefied petroleum gases
BS 6954-1:1988, ISO 3443-1:1979 BS 6954-1:1988, ISO 3443-1:1979. Tolerances for building. Recommendations for basic principles for evaluation and specification
BS 6954-3:1988, ISO 3443-3:1987 BS 6954-3:1988, ISO 3443-3:1987. Tolerances for building. Recommendations for selecting target size and predicting fit
BS AU 203a:1988, ISO 7653-1985 BS AU 203a:1988, ISO 7653-1985. Specification for dimensions of couplings between power take offs (PTOs) and ancillary driven units on commercial road vehicles
BS AU 214-2:1988, ISO 7646-1986 BS AU 214-2:1988, ISO 7646-1986. Gearbox flanges. Specification for dimensions for type A gearbox flanges for commercial vehicles and buses
BS 1192PG:1988 BS 1192PG:1988. Construction drawing practice. Graphic symbols for construction drawings
BS 903-A32:1988, ISO 3383:1985 BS 903-A32:1988, ISO 3383:1985. Physical testing of rubber. General directions for achieving elevated or subnormal temperatures for test purposes
BS 1741-8:1988 BS 1741-8:1988. Methods for chemical analysis of liquid milk and cream. Determination of chloride content of liquid milk
BS 1741-9:1988 BS 1741-9:1988. Methods for chemical analysis of liquid milk and cream. Determination of ash from liquid milk
BS 3456:Part 102:Section 102.342:1988 BS 3456:Part 102:Section 102.342:1988. Specification for safety of household and similar electrical appliances. Particular requirements. Electric fans and regulat
BS AU 224a:1988 BS AU 224a:1988. Specification for portable wheel ramps for cars and light vans
BS 1902-3.0:1988 BS 1902-3.0:1988. Methods of testing refractory materials. General and textural properties. Introduction
BS 3083:1988 BS 3083:1988. Specification for hot-dip zinc coated and hot-dip aluminium/zinc coated corrugated steel sheets for general purposes
BS 3383:1988, ISO 226:1987 BS 3383:1988, ISO 226:1987. Specification for normal equal-loudness level contours for pure tones under free-field listening conditions
BS 3849:Part 2:1988, ISO 5356-2:1987 BS 3849:Part 2:1988, ISO 5356-2:1987. Conical connectors for anaesthetic and respiratory equipment. Specification for screw-threaded weight-bearing connectors
BS EN 60034-4:1995 BS EN 60034-4:1995. Rotating electrical machines. Methods for determining synchronous machine quantities from tests
BS 5424-3:1988, IEC 60158-3:1985 BS 5424-3:1988, IEC 60158-3:1985. Specification for controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c. Additional requirements for contactors sub
BS 6770:1988 BS 6770:1988. Guide for exterior colours for park homes (mobile homes), holiday caravans and transportable accommodation units
BS 6937:1988, ISO 6440-1985 BS 6937:1988, ISO 6440-1985. Glossary of wheelchair terms
BS 6955:Part 0:1988, ISO 5347-0:1987 BS 6955:Part 0:1988, ISO 5347-0:1987. Calibration of vibration and shock pick-ups. Guide to basic principles
BS CECC 00800:1988 BS CECC 00800:1988. Harmonized systemof quality assessment for electronic components. Code of practice for the use of the ppm approach in association with the CECC system
BS 2C 8:1988, ISO 7166-1985 BS 2C 8:1988, ISO 7166-1985. Specification for rail and stud configuration for aircraft passenger equipment and cargo restraint
BS 4559-9.2:1988, ISO 6711-1981 BS 4559-9.2:1988, ISO 6711-1981. Methods for preparation of calibration gas mixtures. Comparison methods and methods for establishing traceability. Checking by a compar
BS 5588:Part 8:1988 BS 5588:Part 8:1988. Fire precautions in the design, construction and use of buildings. Code of practice for means of escape for disabled people
BS 3095-1.1:1988 BS 3095-1.1:1988. Methods for determination of the freezing-point depression of milk. Methods. Thermistor cryoscope method
BS 4370-3:1988 BS 4370-3:1988. Methods of test for rigid cellular materials. Methods 12 and 13
BS 6275-3:1988 BS 6275-3:1988. Hydraulic fluid power filter elements. Specification for marking
BS AU 223:1988 BS AU 223:1988. Specification for vehicle support stands for cars and light vans
BS 2C 13:1988 BS 2C 13:1988. Specification for sizes of aircraft gravity filling orifices and associated replenishment nozzles (metric series)
BS 2649-1:1988 BS 2649-1:1988. Methods for analysis of glass. Glasses of the soda-lime-magnesia-silica type
BS 2649-3:1988 BS 2649-3:1988. Methods for analysis of glass. Glasses of the potassium oxide-lead oxide-silica type
BS 3095-1.2:1988 BS 3095-1.2:1988. Methods for determination of the freezing-point depression of milk. Methods. Hortvet method
BS 3095-2:1988 BS 3095-2:1988. Methods for determination of the freezing-point depression of milk. Recommendations for the interpretation of the freezing-point depression of herd milk
BS 4559-4:1988, ISO 6141-1984 BS 4559-4:1988, ISO 6141-1984. Methods for preparation of calibration gas mixtures. Certificate of mixture preparation
BS 4559-9.1:1988, ISO 6143-1981 BS 4559-9.1:1988, ISO 6143-1981. Methods for preparation of calibration gas mixtures. Comparison methods and methods for establishing traceability. Determination of com
BS 6941:1988 BS 6941:1988. Specification for electrical apparatus for explosive atmospheres with type of protection N
BS 2975:1988 BS 2975:1988. Methods for sampling and analysis of glass-making sands
BS 6926:1988 BS 6926:1988. Specification for copper for electrical purposes: high conductivity copper wire rod
BS 1344:Part 3:1988, ISO 8290-1987 BS 1344:Part 3:1988, ISO 8290-1987. Methods of testing vitreous enamel finishes. Determination of resistance to sulphuric acid at room temperature
BS 4325:Part 10:1988, ISO 8892:1987 BS 4325:Part 10:1988, ISO 8892:1987. Methods for analysis of oilseed residues. Determination of total residual hexane
BS 6413-7:1988, ISO 6743-7:1986 BS 6413-7:1988, ISO 6743-7:1986. Lubricants, industrial oils and related products (class L). Classification for family M (metalworking)
BS 6947:1988 BS 6947:1988. Specification for acid oils and recovered fatty acid distillates
BS M 67:1988, ISO 9031:1987 BS M 67:1988, ISO 9031:1987. Specification for symbols for the pictorial representation of aircraft cargo handling systems for unit load devices (ULDs)
BS 684:Part 2:Section 2.10:1988 BS 684:Part 2:Section 2.10:1988. Methods of analysis of fats and fatty oils. Other methods. Determination of acidity
BS 903:Part A36:1988, ISO 4661/1-1986 BS 903:Part A36:1988, ISO 4661/1-1986. Physical testing of rubber. Preparation of samples and test pieces
BS 6951:1988, EN 27029:1991,ISO 7029-1984 BS 6951:1988, EN 27029:1991,ISO 7029-1984. Specification for threshold of hearing by air conduction as a function of age and sex for otologically normal perso
BS 1741-5.1:1988 BS 1741-5.1:1988. Methods for chemical analysis of liquid milk and cream. Determination of the nitrogen content of liquid milk. Reference method
BS 4443-3:1988 BS 4443-3:1988. Methods of test for flexible cellular materials. Method 8. Determination of creep. Method 9. Determination of dynamic cushioning performance
BS 5304:1988 BS 5304:1988. Code of practice for safety of machinery
BS 6413-3.1:1988, ISO 6743-3A:1987 BS 6413-3.1:1988, ISO 6743-3A:1987. Lubricants, industrial oils and related products (class L). Classification for family D (compressors). Air compressors
BS 6950:1988, EN 27566:1991,ISO 7566:1987 BS 6950:1988, EN 27566:1991,ISO 7566:1987. Specification for a standard reference zero for the calibration of pure tone bone conduction audiometers
BS 9120:1988 BS 9120:1988. Specification for radio interference suppression filters of assessed quality: generic data and methods of test
BS G 240:1988 BS G 240:1988. Specification for pressure transducers for use on aircraft
BS 4169:1988 BS 4169:1988. Specification for manufacture of glued-laminated timber structural members
BS 4443-2:1988 BS 4443-2:1988. Methods of test for flexible cellular materials. Method 7. Indentation hardness tests
BS 4783-1:1988 BS 4783-1:1988. Storage, transportation and maintenance of media for use in data processing and information storage. Recommendations for disk packs, storage modules and disk cartridges
BS 4783-2:1988 BS 4783-2:1988. Storage, transportation and maintenance of media for use in data processing and information storage. Recommendations for magnetic tape on open spools
BS 4783-3:1988 BS 4783-3:1988. Storage, transportation and maintenance of media for use in data processing and information storage. Recommendations for flexible disk cartridges
BS 4921:1988 BS 4921:1988. Specification for sherardized coatings on iron or steel
BS 5386:Part 5:1988 BS 5386:Part 5:1988. Specification for gas burning appliances. Specification for gas burning instantaneous water heaters with automatic output variation (2nd and 3rd family gases)
NC/BS6873 : 1988 NC/BS6873 : 1988.
BS 6967:1988, EN 165:1986 BS 6967:1988, EN 165:1986. Glossary of terms for personal eye-protection
BS 1134-1:1988 BS 1134-1:1988. Assessment of surface texture. Methods and instrumentation
BS 6840-8:1988, IEC 60268-8:1973 BS 6840-8:1988, IEC 60268-8:1973. Sound system equipment. Methods for specifying and measuring the characteristics of automatic gain control devices
BS 6891:1988 BS 6891:1988. Specification for installation of low pressure gas pipework of up to 28 mm (R1) in domestic premises (2nd family gas)
BS 6938:1988 BS 6938:1988. Recommendations for documentation of the preparation of certified reference materials for metallurgical analysis of non-ferrous metals
PD 6517:1988 PD 6517:1988. Report on strengthened/reinforced soils and other fills
BS 6880-1:1988 BS 6880-1:1988. Code of practice for low temperature hot water heating systems of output greater than 45 kW. Fundamental and design considerations
BS 6880-2:1988 BS 6880-2:1988. Code of practice for low temperature hot water heating systems of output greater than 45 kW. Selection of equipment
BS 6880-3:1988 BS 6880-3:1988. Code of practice for low temperature hot water heating systems of output greater than 45 kW. Installation, commissioning and maintenance
BS 817:1988 BS 817:1988. Specification for surface plates
BS 5839-5:1988 BS 5839-5:1988. Fire detection and alarm systems for buildings. Specification for optical beam smoke detectors
BS 6166-3:1988 BS 6166-3:1988. Lifting slings. Guide to the selection and safe use of lifting slings for multi-purposes
DD 175:1988 DD 175:1988. Code of practice for the identification of potentially contaminated land and its investigation
BS 5545:Part 1:1988 BS 5545:Part 1:1988. Milking machine installations. Glossary of terms
BS 5545:Part 2:1988 BS 5545:Part 2:1988. Milking machine installations. Specification for construction and performance
BS 5545:Part 3:1988 BS 5545:Part 3:1988. Milking machine installations. Methods for mechanical testing
BS 4999-147:1988, IEC 60136:1986 BS 4999-147:1988, IEC 60136:1986. General requirements for rotating electrical machines. Specification for dimensions of brushes and brush-holders for electrical machi
BS 6931:1988 BS 6931:1988. Glossary of terms for copper and copper alloys
BS 1726-2:1988 BS 1726-2:1988. Coil springs. Guide for the design of helical extension springs
BS 2869:Part 2:1988 BS 2869:Part 2:1988. Fuel oils for non-marine use. Specification for fuel oil for agricultural and industrial engines and burners (classes A2, C1, C2, D, E, F, G and H)
BS 9125:1988 BS 9125:1988. Specification for capability approval of manufacturers of passive radio interference suppression filter units of assessed quality generic data
PP 7320:1988 PP 7320:1988. Construction drawing practice for schools
BS 5311:1988 BS 5311:1988. Specification for high-voltage alternating-current circuit-breakers
BS 5070-3:1988 BS 5070-3:1988. Engineering diagram drawing practice. Recommendations for mechanical/fluid flow diagrams
BS 3087-4:1988 BS 3087-4:1988. Pliers and nippers. Methods of test
BS 6083-10:1988, IEC 60118-10:1996 BS 6083-10:1988, IEC 60118-10:1996. Hearing aids. Guide to hearing aid standards
PD 6503-2:1988 PD 6503-2:1988. Toxicity of combustion products. Guide to the relevance of small-scale tests for measuring the toxicity of combustion products of materials and composites
BS EN 190108:1994 BS EN 190108:1994. Specification for harmonized system of quality assessment for electronic components. Family specification. TTL advanced SCHOTTKY digital integrated circuits series
BS 6579-6:1988 BS 6579-6:1988. Safety fences and barriers for highways. Specification for components for open box beam safety fence (double height)
BS 5258:Part 6:1988 BS 5258:Part 6:1988. Safety of domestic gas appliances. Specification for refrigerators and food freezers
BS 5839-4:1988 BS 5839-4:1988. Fire detection and alarm systems for buildings. Specification for control and indicating equipment
BS 4772:1988 BS 4772:1988. Specification for ductile iron pipes and fittings
BS 7005:1988 BS 7005:1988. Specification for design and manufacture of carbon steel unfired pressure vessels for use in vapour compression refrigeration systems
BS 3406-7:1988 BS 3406-7:1988. Methods for determination of particle size distribution. Recommendations for single particle light interaction methods
BS 4999-105:1988, EN 60034-5:1986 BS 4999-105:1988, EN 60034-5:1986. General requirements for rotating electrical machines. Classification of degrees of protection provided by enclosures for rotating
BS F 133:1988 BS F 133:1988. Specification for warp knitted nylon fabric for aerospace purposes
BS 4783-4:1988 BS 4783-4:1988. Storage, transportation and maintenance of media for use in data processing and information storage. Recommendations for magnetic tape cartridges and cassettes
BS 9925-03.0:1988, IEC 60723-4:1987,QC 250300:1987 BS 9925-03.0:1988, IEC 60723-4:1987,QC 250300:1987. Harmonized system of quality assessment for electronic components. Inductor and transformer cores
BS 1447:1988 BS 1447:1988. Specification for mastic asphalt (limestone fine aggregate) for roads, footways and pavings in building
BS 4040:1988 BS 4040:1988. Specification for leaded petrol (gasoline) for motor vehicles
BS EN 22206:1993, ISO 2206:1987 BS EN 22206:1993, ISO 2206:1987. Complete, filled transport packages. Method for identifying parts when testing
BS 5657:1988, EN 23830:1989,ISO 3830:1981 BS 5657:1988, EN 23830:1989,ISO 3830:1981. Method for determination of lead content of gasoline by the iodine monochloride method
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
