BIS Standards Catalogue
BS CECC 31400:1982 BS CECC 31400:1982. Harmonized system of quality assessment for electronic components: sectional specification: fixed ceramic capacitors of dielectric class 1, for electrical shock
BS CECC 31500:1982 BS CECC 31500:1982. Harmonized system of quality assessment of electronic components. Sectional specification: fixed ceramic capacitors of dielectric class 2, for electrical shock h
BS 684:Part 1:Section 1.1:1985 BS 684:Part 1:Section 1.1:1985. Methods of analysis of fats and fatty oils. Physical methods. Determination of litre weight in air
BS 1000[33]:1985 BS 1000[33]:1985. Universal Decimal Classification. English full edition. Economics
BS 3591:1985 BS 3591:1985. Specification for industrial methylated spirits
BS 4727-5:Group 01:1985 BS 4727-5:Group 01:1985. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to electromedical equipment. Radiology
BS 4736:1985, ISO 7771-1985 BS 4736:1985, ISO 7771-1985. Method for determination of dimensional changes of fabrics induced by cold-water immersion
BS 5834-3:1985 BS 5834-3:1985. Surface boxes, guards and underground chambers for gas and waterworks purposes. Specification for large surface boxes
BS 6458-2.3:1985, IEC 60695-2-3:1984 BS 6458-2.3:1985, IEC 60695-2-3:1984. Fire hazard testing for electrotechnical products. Test methods. Bad-connection test with heaters
BS 6641:1985, IEC 60788:1984 BS 6641:1985, IEC 60788:1984. Glossary of medical radiology terms
BS 6653:1985, IEC 60776:1983 BS 6653:1985, IEC 60776:1983. Method for expression of the properties of logic analyzers
BS 6683:1985 BS 6683:1985. Guide to installation and use of valves
BS AU 163a:1985, ISO 3583-1984 BS AU 163a:1985, ISO 3583-1984. Specification for pressure test connection for compressed-air pneumatic braking equipment for road vehicles
BS CECC 18001:1984 BS CECC 18001:1984. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: dry reed change-over contact units, mechanically
BS 9210 N001-1:1975 BS 9210 N001-1:1975. Detail specification for radio frequency connectors (type BNC). Sealed, soldered, captive contact, 50 ohms. Full assessment level
BS 9210 N0001:Part 2:1982 BS 9210 N0001:Part 2:1982. Detail specification for radio frequency connectors (type BNC). Sealed, soldered, captive contact, 50 ohms. Control drawings. Mating face details a
BS 9210 N0003:1976 BS 9210 N0003:1976. Detail specification for radio frequency connectors (type BNC). Unsealed, soldered, captive contact, 50 ohms. Full assessment level
BS 9210 N0004:1981 BS 9210 N0004:1981. Detail specification for radio frequency coaxial connectors (series BNC). Unsealed, soldered, captive contact, 50 ohms. Basic assessment level
BS 9210 N007-1:1976 BS 9210 N007-1:1976. Detail specification for radio frequency connectors (type SMB). Unsealed, soldered, captive contact, 50 Ω, snap-on couplings. Full assessment level
BS 9210 N007-2:1976 BS 9210 N007-2:1976. Detail specification for radio frequency connectors (type SMB). Unsealed, soldered, captive contact, 50 ohms, snap-on couplings. Control drawings. Mating face
BS 9210 N0009-1:1978 BS 9210 N0009-1:1978. Detail specification for radio frequency connectors (series SMC). Unsealed, soldered, captive contact, 50 Ω, screw coupling. Full assessment level
BS 9210 N0009-2:1978 BS 9210 N0009-2:1978. Detail specification for radio frequency connectors (series SMC). Unsealed, soldered, captive contact, 50 ohms, screw coupling. Control drawings. Mating face
BS 9520:1983 BS 9520:1983. Specification for electrical connectors of assessed quality for d.c. and low frequency application: generic data, methods of test and capability approval procedures
BS 9521:1983 BS 9521:1983. Specification for removable contacts of assessed quality for electrical connectors as defined by BS 9520: generic data, methods of test and rules for the preparation of deta
BS 9522 N0001:1982 BS 9522 N0001:1982. Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications. Bayonet coupling with front release, rear removabl
BS 9523:1984 BS 9523:1984. Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with integral metal housings for d.c. and low frequency applicat
BS 9524:1984 BS 9524:1984. Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with moulded bodies for d.c. and low frequency applications. Ful
BS 9525:1984 BS 9525:1984. Rules for the preparation of detail specifications for two-part printed board electrical connectors and board-mounted transition devices of assessed quality for d.c. and l.f
BS 9940-05.01:1985, IEC 60115-7-1:1984,QC 400501:1984 BS 9940-05.01:1985, IEC 60115-7-1:1984,QC 400501:1984. Harmonized system of quality assessment for electronic components. Fixed resistors for use
BS 9526 N0001:1978 BS 9526 N0001:1978. Detail specification for multi-contact edge socket electrical connectors. Single or double sided, closed ended, replaceable contacts, through-board solder or wir
BS 9526 N0002:1979 BS 9526 N0002:1979. Detail specification for multi-contact edge socket electrical connectors. Single or double sided, open ended, metal fixing flanges, guide key location, replaceab
BS 9526 N0003:1979 BS 9526 N0003:1979. Detail specification for multi-contact edge socket electrical connectors. Single or double sided, open ended, guide key location, replaceable contacts, through-b
BS CECC 22110:1983 BS CECC 22110:1983. Harmonized system of quality assessment for electronic components: sectional specification: radio frequency coaxial connectors, series SMA
BS CECC 22111:1983 BS CECC 22111:1983. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency coaxial connections, series SMA
BS CECC 22121:1981 BS CECC 22121:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency coaxial connectors, series BNC
BS 9760:1977 BS 9760:1977. Specification for printed circuits of assessed quality: generic data and methods of test: capability approval procedure and rules
BS 9766:1983 BS 9766:1983. Specification for printed circuits of assessed quality: sectional specification for multilayer flexi-rigid printed circuits with through hole connections
BS CECC 75100:1984 BS CECC 75100:1984. Harmonized system of quality assessment for electronic components. Sectional specification: two-part and edge socket connectors for printed board application
BS CECC 75101:1984 BS CECC 75101:1984. Specification for harmonized system of quality assessment for electronic components. Example detail specification/blank detail specification. Two-part and edge s
BS 9430:1978 BS 9430:1978. Rules for the preparation of detail specifications for integrated circuits of assessed quality: voltage regulators. Full assessment level
BS 9450:1975 BS 9450:1975. Specification for integrated electronic circuits and micro-assemblies of assessed quality (capability approval procedures): generic data and methods of test
BS 9460:1974 BS 9460:1974. Rules for the preparation of detail specifications for integrated circuits of assessed quality: differential operational amplifiers. General application category
BS 9490:1975 BS 9490:1975. Rules for the preparation of detail specifications for digital integrated circuits of assessed quality. Full assessment level
BS 9491:1975 BS 9491:1975. Rules for the preparation of detail specifications for analogue integrated circuits of assessed quality. Full assessment level
BS 9492:1978 BS 9492:1978. Rules for the preparation of detail specifications for capacitively coupled digital integrated circuits of assessed quality. Full assessment level
BS 9493:1981 BS 9493:1981. Rules for the preparation of detail specifications for integrated circuits of assessed quality which perform mixed digital and/or analogue functions
BS CECC 63100:1985 BS CECC 63100:1985. Harmonized system of quality assessment for electronic components: sectional specification: film and hybrid integrated circuits
BS CECC 63101:1985 BS CECC 63101:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: film and hybrid integrated circuits
BS CECC 63200:1985 BS CECC 63200:1985. Harmonized system of quality assessment for electronic components: sectional specification: film and hybrid integrated circuits (capability approval)
BS CECC 63201:1985 BS CECC 63201:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: film and hybrid integrated circuits (capability
BS CECC 90000:1985 BS CECC 90000:1985. Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
BS CECC 90101:1980 BS CECC 90101:1980. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL circuits, series 54, 64, 74, 84
BS EN 190102:1994 BS EN 190102:1994. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL-SCHOTTKY circuits, series 54S, 64
BS CECC 90104:1981 BS CECC 90104:1981. Specification for harmonized system of quality assessment for electronic components. Family specification: C. Mos digital integrated circuits, series 4000B and 4
BS CECC 90201:1984 BS CECC 90201:1984. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated voltage regulators
BS CECC 90203:1985 BS CECC 90203:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated analogue switching circuits
BS CECC 90301:1985 BS CECC 90301:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated line transmitters and receivers
BS 541:1985 BS 541:1985. Method for determination of the Rideal-Walker coefficient of disinfectants
BS 3683-2:1985 BS 3683-2:1985. Glossary of terms used in non-destructive testing. Magnetic particle flaw detection
BS 5237:1985 BS 5237:1985. Specification for lifting twistlocks
BS 6559:1989, HD 1/160 BS 6559:1989, HD 1/160. Guide. General introductory document on European (or CEN) methods of test for wood preservatives
BS AU 50:Part 3:Section 1a:1985 BS AU 50:Part 3:Section 1a:1985. Tyres and wheels. Valves. Specification for valve dimensions
BS 5817-14:1985 BS 5817-14:1985. Specification for audiovisual, video and television equipment and systems. Specification for audio striped card system
BS 6340-3:1985 BS 6340-3:1985. Shower units. Specification for prefabricated shower enclosures and shower cabinets
BS 5817:Part 15:1985, IEC 60574-15:1984 BS 5817:Part 15:1985, IEC 60574-15:1984. Specification for audiovisual, video and television equipment and systems. Specification for audio pages
BS EN 143000:1992 BS EN 143000:1992. Harmonized system of quality assessment for electronic components: generic specification: directly heated negative temperature coefficient thermistors
BS EN 143001:1992 BS EN 143001:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: directly heated negative temperature coefficient t
BS EN 143002:1992 BS EN 143002:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: directly heated negative temperature coefficient t
BS EN 143003:1992 BS EN 143003:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: directly heated negative temperature coefficient t
BS EN 143004:1992 BS EN 143004:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: directly heated negative temperature coefficient t
BS 9025:1970 BS 9025:1970. Specification for travelling-wave amplifier tubes of assessed quality: generic data and methods of test
BS 9031:1971 BS 9031:1971. Rules for the preparation of detail specifications for pulsed fixed-frequency magnetrons of assessed quality
BS 9032:1975 BS 9032:1975. Rules for the preparation of detail specifications for pulsed magnetrons (excluding frequency-agile magnetrons) of assessed quality. Basic assessment level
BS 9040:1978 BS 9040:1978. Specification for gas-filled microwave switching tubes of assessed quality: generic data and methods of test
BS 9041:1978 BS 9041:1978. Rules for the preparation of detail specifications for gas filled microwave switching tubes of assessed quality: tunable and broadband TR tubes and TR limiters. Full assessm
BS 9047:1978 BS 9047:1978. Specification for glow modulator tubes of assessed quality: generic data and methods of test
BS 9048:1978 BS 9048:1978. Rules for the preparation of detail specifications for glow modulator tubes of assessed quality
BS 9050:1971 BS 9050:1971. Specification for cathode ray tubes of assessed quality: generic data and methods of test
BS 9054:1971 BS 9054:1971. Rules for the preparation of detail specifications for radar display cathode ray tubes of assessed quality
BS 9062:1983 BS 9062:1983. Specification for microwave passive components of assessed quality: generic data and methods of test
BS 9064:1983 BS 9064:1983. Sectional specification for circulators or isolators of assessed quality for capability approval
BS EN 111000:1993 BS EN 111000:1993. Harmonized system of quality assessment for electronic components. Generic specification: cathode ray tubes
BS EN 111100:1992 BS EN 111100:1992. Harmonized system of quality assessment for electronic components: sectional specification: display storage tubes
BS EN 113000:1993, CECC 13000:1980 BS EN 113000:1993, CECC 13000:1980. Harmonized system of quality assessment for electronic components. Generic specification: camera tubes
BS EN 114000:1993, CECC 14000:1984 BS EN 114000:1993, CECC 14000:1984. Harmonized system of quality assessment for electronic components: generic specification: photomultiplier tubes
BS EN 135000:1993, CECC 35000:1977 BS EN 135000:1993, CECC 35000:1977. Harmonized system of quality assessment for electronic components. Generic specification: travelling wave amplifier tubes
BS EN 136000:1993, CECC 36000:1977 BS EN 136000:1993, CECC 36000:1977. Harmonized system of quality assessment for electronic components: generic specification: magnetrons
BS CECC 45000:1977 BS CECC 45000:1977. Specification for harmonized system of quality assessment for electronic components: generic specification: space-charge controlled tubes
BS E9063:1976, CECC 45002:1975 BS E9063:1976, CECC 45002:1975. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: industrial heating triod
BS E9065:1976, CECC 45003:1975 BS E9065:1976, CECC 45003:1975. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: small power transmitting
BS CECC 45004:1977 BS CECC 45004:1977. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: disc seal power tubes
BS CECC 46000:1978 BS CECC 46000:1978. Harmonized system of quality assessment for electronic components: generic specification: cold cathode indicator tubes
BS CECC 46001:1977 BS CECC 46001:1977. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: cold cathode indicator tubes
BS 308-2:1985 BS 308-2:1985. Engineering drawing practice. Recommendations for dimensioning and tolerancing of size
BS 4742-3:1985, ISO 5670-1984 BS 4742-3:1985, ISO 5670-1984. Hydraulic equipment for agricultural machinery. Specification for dimensions and pressure rating of single-acting telescopic tipping cylind
BS 4742-4:1985, ISO 5676-1983 BS 4742-4:1985, ISO 5676-1983. Hydraulic equipment for agricultural machinery. Specification for hydraulic couplings on braking systems for trailers and trailed equipment
BS 4742-5:1985, ISO 5669-1982 BS 4742-5:1985, ISO 5669-1982. Hydraulic equipment for agricultural machinery. Specification for dimensions of braking cylinders for trailers and trailed equipment
BS 6161-11:1985 BS 6161-11:1985. Methods of test for anodic oxidation coatings on aluminium and its alloys. Measurement of total reflectance using a photoelectric reflectometer
BS 6626:1985 BS 6626:1985. Code of practice for maintenance of electrical switchgear and controlgear for voltages above l kV and up to and including 36 kV
BS 6645:1985 BS 6645:1985. Method for determination of alkali solubility of flax materials
BS 6646:1985 BS 6646:1985. Method for determination of ash of textiles
BS MA 2-8:1985 BS MA 2-8:1985. Magnetic compasses and binnacles. Specification for transmitting systems and off-course alarms for class A magnetic compasses
BS A 295:1985, ISO 7481-1984 BS A 295:1985, ISO 7481-1984. Methods of test for self-locking nuts with maximum operating temperature less than or equal to 425°C
BS 507:1985 BS 507:1985. Specification for ethanol for industrial use
BS 3921:1985 BS 3921:1985. Specification for clay bricks
BS 5156:1985 BS 5156:1985. Specification for diaphragm valves
BS 5415-1:1985 BS 5415-1:1985. Safety of electrical motor-operated industrial and commercial cleaning appliances. Specification for general requirements
BS 6057:Part 3:Section 3.5:1985, ISO 127-1984 BS 6057:Part 3:Section 3.5:1985, ISO 127-1984. Rubber latices. Methods of test. Determination of KOH number of natural rubber latices
BS 6649:1985 BS 6649:1985. Specification for clay and calcium silicate modular bricks
BS MA 2-1:1985 BS MA 2-1:1985. Magnetic compasses and binnacles. Specification for class A magnetic compasses, their binnacles and azimuth reading devices (including test procedures)
BS 4G 173-1:1985, ISO 461-1:1985 BS 4G 173-1:1985, ISO 461-1:1985. Connectors for ground electrical supplies for aircraft. Specification for design, performance and test requirements
BS 4G 173-2:1985, ISO 461-2:1985 BS 4G 173-2:1985, ISO 461-2:1985. Connectors for ground electrical supplies for aircraft. Specification for dimensions
BS 1902-4.0:1985 BS 1902-4.0:1985. Methods of testing refractory materials. Properties measured under an applied stress. Introduction
BS 3056-1:1985 BS 3056-1:1985. Sizes of refractory bricks. Specification for multi-purpose bricks
BS 4483:1985 BS 4483:1985. Specification for steel fabric for the reinforcement of concrete
BS 5760:Part 1:1985 BS 5760:Part 1:1985. Reliability of systems, equipment and components. Guide to reliability and maintainability programme management
BS 3A 109:1985 BS 3A 109:1985. Specification for steel shear bolts (Unified hexagons and Unified threads)
BS 9300:1969 BS 9300:1969. Specification for semiconductor devices of assessed quality: generic data and methods of test
BS 9300 C199-276:1971 BS 9300 C199-276:1971. Detail specification for silicon voltage-regulator diodes
BS 9300 C377-378:1971 BS 9300 C377-378:1971. Detail specifications for silicon coaxial mixer diodes
BS 9300 C379-388:1971 BS 9300 C379-388:1971. Detail specifications for silicon stud mounted, power rectifier diodes
BS 9300 C405-429:1971 BS 9300 C405-429:1971. Detail specifications for silicon voltage-regulator diodes
BS 9300 C476:1973 BS 9300 C476:1973. Detail specification for silicon avalanche rectifier diode
BS 9300 C534:1971 BS 9300 C534:1971. Detail specification for silicon coaxial resistive switching diode
BS 9300 C582-584:1971 BS 9300 C582-584:1971. Detail specifications for reverse blocking triode thyristors
BS 9300 C599:1971 BS 9300 C599:1971. Detail specification for silicon microwave switching diode, rod mounted
BS 9300 C667-668:1971 BS 9300 C667-668:1971. Detail specification for silicon avalanche rectifier diodes
BS 9300 C678-721:1971 BS 9300 C678-721:1971. Detail specification for silicon voltage regulator diodes
BS 9300 C762:1971 BS 9300 C762:1971. Detail specification for mixer diodes for use at X-band frequencies
BS 9300 C771-772:1971 BS 9300 C771-772:1971. Detail specification for coaxial mixer diodes
BS 9300 C776-777:1971 BS 9300 C776-777:1971. Detail specification for germanium coaxial mixer diodes
BS 9300 C778:1971 BS 9300 C778:1971. Detail specification for a matched pair of germanium coaxial mixer diodes
BS 9300 C780-831:1971 BS 9300 C780-831:1971. Detail specification for silicon voltage regulator diodes
BS 9300 C841-849:1971 BS 9300 C841-849:1971. Detail specification for silicon voltage regulator diodes
BS 9301 N002:1971 BS 9301 N002:1971. Detail specification for general purpose silicon signal diodes. 150 mA, 150 V, hermetically sealed, glass encapsulation. General application category Q
BS 9305 N001:1972 BS 9305 N001:1972. Detail specification for silicon voltage regulator diodes. 1.5 W, 3.3 to 33 V (5%), hermetically sealed. General application category Q
BS 9305 N041:1972 BS 9305 N041:1972. Detail specification for silicon voltage regulator diodes. 400 mW, 2.7 to 33 V (5%), hermetically sealed, glass encapsulation. General application category Q
BS 9305 N042:1972 BS 9305 N042:1972. Detail specification for silicon voltage regulator diodes. 1.5 W, 6.8 to 200 V (5%), hermetically sealed. General application category C
BS 9305 N044:1974 BS 9305 N044:1974. Detail specification for silicon voltage regulator diodes. 1.0 W, 3.3 to 33 V (5%), hermetically sealed. Full assessment level
BS 9307:1975 BS 9307:1975. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: variable capacitance diodes for tuning applications
BS 9320:1971 BS 9320:1971. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave mixer diodes (c.w. operation)
BS 9321:1971 BS 9321:1971. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave mixer diodes (pulse operation)
BS 9322:1971 BS 9322:1971. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave detector diodes
BS 9323:1976 BS 9323:1976. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: p-i-n microwave passive limiter diodes
BS 9324:1976 BS 9324:1976. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: p-i-n microwave active switching diodes
BS 9325:1977 BS 9325:1977. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave Gunn oscillators (c.w. operation)
BS 9327:1977 BS 9327:1977. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave avalanche oscillators (c.w. operation)
BS 9328:1977 BS 9328:1977. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave avalanche oscillators (pulse operation)
BS 9329:1977 BS 9329:1977. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: varactor diodes for frequency multiplication
BS 9350:1976 BS 9350:1976. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: low noise, low power microwave transistors
BS 9351:1980 BS 9351:1980. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave semiconductor switches (without integrated driver circuits)
BS 9364 N007 and N009:1978 BS 9364 N007 and N009:1978. Detail specification for low power silicon n-p-n switching transistors. 20 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus
BS 9364 N008 and N010:1978 BS 9364 N008 and N010:1978. Detail specification for low power silicon n-p-n switching transistors. 20 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead
BS 9364 N011:1978 BS 9364 N011:1978. Detail specification for low power silicon p-n-p switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessm
BS 9364 N012:1978 BS 9364 N012:1978. Detail specification for low power silicon p-n-p switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version). Full plu
BS 9364 N013:1979 BS 9364 N013:1979. Detail specification for low power silicon p-n-p switching transistors. 25 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessm
BS 9364 N016:1979 BS 9364 N016:1979. Detail specification for low power silicon n-p-n switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessm
BS 9364 N017:1979 BS 9364 N017:1979. Detail specification for low power silicon n-p-n switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version). Full plu
BS 9370:1983 BS 9370:1983. Specification for capability approval of light emitting and infra-red diode arrays of assessed quality: generic data and methods of test
BS EN 150001:1993 BS EN 150001:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: general purpose semiconductor diodes
BS CECC 50008:1982 BS CECC 50008:1982. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: ambient-rated rectifier diodes
BS CECC 50009:1982 BS CECC 50009:1982. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: case-rated rectifier diodes
BS EN 150010:1993 BS EN 150010:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: ambient rated thyristors
BS EN 150011:1993 BS EN 150011:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: case-rated thyristors
BS EN 150012:1993 BS EN 150012:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: single gate field-effect transistors
BS 5760-0:1986 BS 5760-0:1986. Reliability of systems, equipment and components. Introductory guide to reliability
BS 5811:1986 BS 5811:1986. Method for determination of the resistance to pilling and change of appearance of fabrics
BS 874-2.1:1986 BS 874-2.1:1986. Methods for determining thermal insulating properties. Tests for thermal conductivity and related properties. Guarded hot-plate method
BS 5609:1986 BS 5609:1986. Specification for printed pressure-sensitive, adhesive-coated labels for marine use, including requirements for label base material
BS 848-5:1986 BS 848-5:1986. Fans for general purposes. Guide for mechanical and electrical safety
BS 1902:Part 5:Section 5.10:1986 BS 1902:Part 5:Section 5.10:1986. Methods of testing refractory materials. Refractory and thermal properties. Determination of permanent change in dimensions on heatin
BS 3939-1:1986 BS 3939-1:1986. Graphical symbols for electrical power, telecommunications and electronics diagrams. General information, general index
BS 5763:Part 0:1986, ISO 7218-1985 BS 5763:Part 0:1986, ISO 7218-1985. Methods for microbiological examination of food and animal feeding stuffs. General laboratory practices
BS 6493:Part 2:Section 2.2:1986, IEC 60748-2:1985 BS 6493:Part 2:Section 2.2:1986, IEC 60748-2:1985. Semiconductor devices. Integrated circuits. Recommendations for digital integrated circuits
BS 6753:1986 BS 6753:1986. Specification for shotbolts (solenoid operated) for guarding machinery
BS CECC 51000:1986 BS CECC 51000:1986. Harmonized system of quality assessment for electronic components. Generic specification: mercury wetted change-over contact units, magnetically biased
BS 4G 178-2:1986 BS 4G 178-2:1986. Crimped joints for aircraft electrical cables and wires. Specification for control of crimping (including user control tests)
BS 1133-7.2:1986 BS 1133-7.2:1986. Packaging code. Paper and board wrappers, bags and containers. Bags and envelopes
BS 1133-7.3:1986 BS 1133-7.3:1986. Packaging code. Paper and board wrappers, bags and containers. Cartons and boxes
BS 1133-12:1986 BS 1133-12:1986. Packaging code. Methods of protection against shock (excluding cushioning devices)
BS 3761:1986 BS 3761:1986. Specification for solvent-based paint remover
BS 6730:1986 BS 6730:1986. Specification for black polyethylene pipes up to nominal size 63 for above ground use for cold potable water
BS 6737:1986, IEC 60809:1985 BS 6737:1986, IEC 60809:1985. Specification for dimensional, electrical and luminous requirements for lamps for road vehicles
BS 684-2.2:1986, ISO 6884-1985 BS 684-2.2:1986, ISO 6884-1985. Methods of analysis of fats and fatty oils. Other methods. Determination of ash
BS 684:Part 2:Section 2.39:1986, ISO 6800-1985 BS 684:Part 2:Section 2.39:1986, ISO 6800-1985. Methods of analysis of fats and fatty oils. Other methods. Determination of the composition of fatty acid
BS 5244:1986 BS 5244:1986. Recommendations for application, storage and life expiry of hydraulic rubber hoses and hose assemblies
BS 6754:1986, ISO 7183:1986 BS 6754:1986, ISO 7183:1986. Specifications and testing of compressed air dryers
BS 6781:1986, EU 169-1985 BS 6781:1986, EU 169-1985. Specification for continuously organic coated steel flat products
DD 155:1986 DD 155:1986. Method for determination of polished paver value of pavers
BS 6728-1:1986 BS 6728-1:1986. Thermoplastics hot water bottles. Specification for hot water bottles manufactured from PVC compounds
BS 6738:1986, ISO 6357-1985 BS 6738:1986, ISO 6357-1985. Recommendations for presentation of spine titles
BS MA 101:1986 BS MA 101:1986. Specification for toilet retention and recirculation systems for the treatment of toilet waste on small craft
BS 3920-2:1986, ISO 2605-3:1985 BS 3920-2:1986, ISO 2605-3:1985. Derivation and verification of elevated temperature properties for steel products for pressure purposes. Method for deriving the elevat
BS 3958-5:1986 BS 3958-5:1986. Thermal insulating materials. Specification for bonded man-made mineral fibre slabs
BS 6290-3:1986 BS 6290-3:1986. Lead-acid stationary cells and batteries. Specification for lead-acid pasted positive plate type
BS MA 102:1986, ISO 7840:1985 BS MA 102:1986, ISO 7840:1985. Specification for fire resistant fuel hoses for small craft
BS 684-2.26:1986 BS 684-2.26:1986. Methods of analysis of fats and fatty oils. Other methods. Determination of polyethylene-type plastics
BS 2782:Part 1:Method 141:1986, ISO 4589-1984 BS 2782:Part 1:Method 141:1986, ISO 4589-1984. Methods of testing plastics. Thermal properties. Determination of flammability by oxygen index
BS 2910:1986 BS 2910:1986. Methods for radiographic examination of fusion welded circumferential butt joints in steel pipes
BS 3221:Part 7:1986 BS 3221:Part 7:1986. Medicine measures. Specification for oral syringes delivering doses of less than 5 mL
BS 3225:Part 1:1986, ISO 8116-2:1985 BS 3225:Part 1:1986, ISO 8116-2:1985. Beams for warping, sizing and weaving of textile yarns. Specification for main dimensions of, and terminology for, warper's b
BS 3225:Part 4:1986, ISO 8116/1-1985 BS 3225:Part 4:1986, ISO 8116/1-1985. Beams for warping, sizing and weaving of textile yarns. Glossary of terms for winding beams
BS 3762-3.6:1986 BS 3762-3.6:1986. Analysis of formulated detergents. Quantitative test methods. Method for determination of matter soluble in light petroleum
BS 3762-3.9:1986 BS 3762-3.9:1986. Analysis of formulated detergents. Quantitative test methods. Method for determination of soap content
BS 5308-1:1986 BS 5308-1:1986. Instrumentation cables. Specification for polyethylene insulated cables
BS 5308-2:1986 BS 5308-2:1986. Instrumentation cables. Specification for PVC insulated cables
BS 6083-9:1986, IEC 60118-9:1985 BS 6083-9:1986, IEC 60118-9:1985. Hearing aids. Methods for measurement of characteristics of hearing aids with bone vibrator output
BS 6749:Part 1:1986, ISO 7919/1-1986 BS 6749:Part 1:1986, ISO 7919/1-1986. Measurements and evaluation of vibration on rotating shafts. Guide to general principles
BS 6751:1986 BS 6751:1986. Guide for protection of machine tools intended for use in extreme environmental conditions
BS 6794:1986, ISO 8002-1986 BS 6794:1986, ISO 8002-1986. Method for reporting measured vibration data for land vehicles
BS 6804:1986 BS 6804:1986. Code of practice for social alarm systems
BS 3225:Part 5:1986, ISO 8116/4-1985 BS 3225:Part 5:1986, ISO 8116/4-1985. Beams for warping, sizing and weaving of textile yarns. Method of classification of flanges for weavers's beams, warper's bea
BS 5766-11:1986, ISO 6490-1:1985 BS 5766-11:1986, ISO 6490-1:1985. Methods for analysis of animal feeding stuffs. Determination of calcium by titration
BS 5766-12:1986, ISO 6866-1985 BS 5766-12:1986, ISO 6866-1985. Methods for analysis of animal feeding stuffs. Determination of gossypol
BS 2782:Part 8:Method 830A:1986, ISO 175-1981 BS 2782:Part 8:Method 830A:1986, ISO 175-1981. Methods of testing plastics. Other properties. Determination of the effects of liquid chemicals, including
BS 5499-2:1986 BS 5499-2:1986. Fire safety signs, notices and graphic symbols. Specification for self-luminous fire safety signs
BS 5793-6:1986, IEC 60534-6:1985 BS 5793-6:1986, IEC 60534-6:1985. Industrial-process control valves. Specificaton for mounting details for attachment of positioners to control valve actuators
BS 5793-8.1:1986, IEC 60534-8-1:1986 BS 5793-8.1:1986, IEC 60534-8-1:1986. Industrial-process control valves. Noise considerations. Method for laboratory measurement of noise generated by aerodynamic
BS MA 103:1986 BS MA 103:1986. Specification for design conditions and basis of calculations for air-conditioning and ventilation of accommodation spaces in ships
BS 6438-3:1986, IEC 60746-3:1985 BS 6438-3:1986, IEC 60746-3:1985. Electrochemical analyzers. Method for specifying performance of electrolytic conductivity analyzers
BS 6752:1986 BS 6752:1986. Specification for Bourdon tube pressure gauges used in welding, cutting and related processes
BS 3169:1986 BS 3169:1986. Specification for first aid reel hoses for fire-fighting purposes
BS 5550-5.4.4:1986, ISO 8590-1985 BS 5550-5.4.4:1986, ISO 8590-1985. Cinematography. Common to more than one gauge. Sound. Specification for the recorded characteristic for audio records on 35 mm and
BS 5685-2:1986 BS 5685-2:1986. Electricity meters. Specification for single-phase coin operated prepayment flat rate and two-part tariff watt-hour meters of Class 2 and fixed charge collectors of Clas
BS 5685-3:1986 BS 5685-3:1986. Electricity meters. Specification for meters having Class 1 electro-mechanical maximum demand indicators
BS 5685-4:1986 BS 5685-4:1986. Electricity meters. Specification for Class 3 var-hour meters
BS 5696:Part 1:1986 BS 5696:Part 1:1986. Play equipment intended for permanent installation outdoors. Methods of test
BS 6404:Part 5:1986, IEC 60404-5:1982 BS 6404:Part 5:1986, IEC 60404-5:1982. Magnetic materials. Methods of measurement of the magnetic properties of magnetically hard (permanent magnet) materials
BS 6721-4:1986, ISO 4744-1984 BS 6721-4:1986, ISO 4744-1984. Sampling and analysis of copper and copper alloys. Method for determination of chromium in copper and copper alloys by flame atomic absorpt
BS 6721-5:1986, ISO 4740-1985 BS 6721-5:1986, ISO 4740-1985. Sampling and analysis of copper and copper alloys. Method for determination of zinc in copper and copper alloys by flame atomic absorption
BS 6756:1986 BS 6756:1986. Specification for fibre rope cargo nets
BS 6783-1:1986, ISO 6351-1985 BS 6783-1:1986, ISO 6351-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of silver, bismuth, cadmium, cobalt, copper, iron,
BS 6783-2:1986, EN 26352:1991,ISO 6352-1985 BS 6783-2:1986, EN 26352:1991,ISO 6352-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of nickel in ferronick
BS 6783-3:1986, EN 27520:1991,ISO 7520-1985 BS 6783-3:1986, EN 27520:1991,ISO 7520-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of cobalt in ferronick
BS 6783-4:1986, ISO 7523-1985 BS 6783-4:1986, ISO 7523-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of silver, arsenic, bismuth, cadmium, lead, antimo
BS 6783-5:1986, ISO 7524-1985 BS 6783-5:1986, ISO 7524-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of carbon in nickel, ferronickel and nickel alloys
BS 6783-6:1986, ISO 7525-1985 BS 6783-6:1986, ISO 7525-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of sulphur in nickel by methylene blue molecular a
BS 6783-7:1986, EN 27526:1991,ISO 7526-1985 BS 6783-7:1986, EN 27526:1991,ISO 7526-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of sulphur in nickel,
BS 6783-8:1986, EN 27527:1991,ISO 7527-1985 BS 6783-8:1986, EN 27527:1991,ISO 7527-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of sulphur in nickel,
BS 6783-9:1986, EN 28343:1991,ISO 8343-1985 BS 6783-9:1986, EN 28343:1991,ISO 8343-1985. Sampling and analysis of nickel, ferronickel and nickel alloys. Method for determination of silicon in ferronic
BS 903:Part A19:1986, ISO 188-1982 BS 903:Part A19:1986, ISO 188-1982. Physical testing of rubber. Heat resistance and accelerated ageing tests
BS 4227:1986, EN 21560:1991,ISO 1560-1985 BS 4227:1986, EN 21560:1991,ISO 1560-1985. Specification for dental mercury
BS 6797:1986, IEC 60810:1986 BS 6797:1986, IEC 60810:1986. Specification for performance requirements for lamps for road vehicles
BS 903-A52:1986, ISO 6914:1985 BS 903-A52:1986, ISO 6914:1985. Physical testing of rubber. Determination of ageing characteristics by measurement of stress at a given elongation
BS 2874:1986 BS 2874:1986. Specification for copper and copper alloy rods and sections (other than forging stock)
BS 4193-16:1986, ISO 7848-1986 BS 4193-16:1986, ISO 7848-1986. Hardmetal insert tooling. Specification for designation of shank type milling cutters for indexable inserts
BS 4931:1986 BS 4931:1986. Methods for preparation, marking and measuring of textile fabrics, garments and fabric assemblies in tests for assessing dimensional change
BS 5799:1986 BS 5799:1986. Specification for safety requirements for children's high chairs and multi-purpose high chairs for domestic use
BS 6739:1986 BS 6739:1986. Code of practice for instrumentation in process control systems: installation design and practice
BS 6786:1986, IEC 60424:1973 BS 6786:1986, IEC 60424:1973. Guide to the specification of limits for physical imperfections of parts made from magnetic oxides
BS 6801:1986, IEC 60858:1986 BS 6801:1986, IEC 60858:1986. Method for determination of image distortion of electro-optical X-ray image intensifiers
BS EN 120003:1993 BS EN 120003:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Phototransistors, photodarlington transistors, pho
BS EN 120005:1993 BS EN 120005:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Photodiodes, photodiode-arrays (not intended for f
BS ISO 3534-3:1985 BS ISO 3534-3:1985. Statistics. Vocabulary and symbols. Glossary of terms relating to the design of experiments
BS 6784:1986 BS 6784:1986. Specification for rubber hoses and hose assemblies for automobile power steering systems
BS 3087-3:1986, ISO 5743-1982 BS 3087-3:1986, ISO 5743-1982. Pliers and nippers. Specification for general requirements
BS 3762-4.2:1986, ISO 697-1981 BS 3762-4.2:1986, ISO 697-1981. Analysis of formulated detergents. Physical test methods. Method for determination of apparent bulk density
BS 3087-2:1986, ISO 5742-1982 BS 3087-2:1986, ISO 5742-1982. Pliers and nippers. Nomenclature
BS 3087-5:1986, ISO 5745-1982 BS 3087-5:1986, ISO 5745-1982. Pliers and nippers. Specification for dimensions of pliers for gripping and manipulating
BS 3087-6:1986, ISO 5746-1982 BS 3087-6:1986, ISO 5746-1982. Pliers and nippers. Specification for dimensions of engineers and lineman's pliers
BS 3087:Part 7:1986, ISO 5747-1982 BS 3087:Part 7:1986, ISO 5747-1982. Pliers and nippers. Specification for dimensions of lever assisted side cutting pliers, end and diagonal cutting nippers
BS 3087-8:1986, ISO 5748-1982 BS 3087-8:1986, ISO 5748-1982. Pliers and nippers. Specification for dimensions of end cutting nippers
BS 3087-9:1986, ISO 5749-1982 BS 3087-9:1986, ISO 5749-1982. Pliers and nippers. Specification for dimensions of diagonal cutting nippers
BS 3165:1986 BS 3165:1986. Specification for rubber and plastics suction hoses and hose assemblies for fire-fighting purposes
BS 3505:1986 BS 3505:1986. Specification for unplasticized polyvinyl chloride (PVC-U) pressure pipes for cold potable water
BS 3923:Part 1:1986 BS 3923:Part 1:1986. Methods for ultrasonic examination of welds. Methods for manual examination of fusion welds in ferritic steels
BS 5080-2:1986 BS 5080-2:1986. Structural fixings in concrete and masonry. Method for determination of resistance to loading in shear
BS 1133-19:1986 BS 1133-19:1986. Packaging code. Use of desiccants in packaging
BS 1000[669]:1986 BS 1000[669]:1986. Universal Decimal Classification. English full edition. Metallurgy
BS 3101:1986 BS 3101:1986. Specification for control and interlock circuits primarily associated with flameproof restrained plugs and sockets for use in coal mines
BS 4960:1986 BS 4960:1986. Specification for weighing instruments for domestic cookery
BS 5122:1986 BS 5122:1986. Specification for rubber hoses for low-pressure and medium-pressure saturated steam
BS 6404:Part 8:Section 8.4:1986 BS 6404:Part 8:Section 8.4:1986. Magnetic materials. Individual materials. Specification for cold-rolled, non-oriented magnetic steel sheet and strip delivered in the f
BS 6744:1986 BS 6744:1986. Specification for austenitic stainless steel bars for the reinforcement of concrete
BS 6789-6.1:1986 BS 6789-6.1:1986. Apparatus with one or more particular functions for connection to certain public switched telephone networks. Specification for series connected apparatus. Apparatus
BS 5550-2.4.3:1986, ISO 1188-1984 BS 5550-2.4.3:1986, ISO 1188-1984. Cinematography. 16 mm film. Sound. Specification for the recorded characteristic for magnetic round records on 16 mm motion-picture
BS 5550-3.2.1:1986, ISO 2906:1984 BS 5550-3.2.1:1986, ISO 2906:1984. Cinematography. 35 mm film. Image areas. Specification for the position and dimensions of the image area produced by camera apertur
BS 5550-3.2.2:1986, ISO 2907:1984 BS 5550-3.2.2:1986, ISO 2907:1984. Cinematography. 35 mm film. Image areas. Specification for the position and dimensions of the maximum projectable image area on 35
BS 6248-10:1986, ISO 5543-1986 BS 6248-10:1986, ISO 5543-1986. Caseins and caseinates. Method for determination of fat (gravimetric reference method)
BS 4724:Part 1:1986 BS 4724:Part 1:1986. Resistance of clothing materials to permeation by liquids. Method for the assessment of breakthrough time
BS 5550-5.4.1:1986 BS 5550-5.4.1:1986. Cinematography. Common to more than one gauge. Sound. Code of Practice for the identification of systems for synchronization of unperforated audio tape with moti
BS 6068:Part 2:Section 2.28:1986, ISO 6878/1-1986 BS 6068:Part 2:Section 2.28:1986, ISO 6878/1-1986. Water quality. Physical, chemical and biochemical methods. Method for the determination of phosphor
BS 6788:Part 1:1986 BS 6788:Part 1:1986. Neurosurgical implants. Specification for sterile, single-use hydrocephalus shunts and components
BS EN 190100:1993 BS EN 190100:1993. Harmonized system of quality assessment for electronic components: sectional specification: digital monolithic integrated circuits
BS8100-1 : 1986 BS8100-1 : 1986 .
BS 8100-2:1986 BS 8100-2:1986. Lattice towers and masts. Guide to the background and use of Part 1 'Code of practice for loading'
DD 133:1986 DD 133:1986. Code of practice for strength assessment of members of lattice towers and masts
BS 240:1986 BS 240:1986. Method for Brinell hardness test and for verification of Brinell hardness testing machines
BS 874-1:1986 BS 874-1:1986. Methods for determining thermal insulating properties. Introduction, definitions and principles of measurement
BS 5550-2.7.1:1986, ISO 26-1985 BS 5550-2.7.1:1986, ISO 26-1985. Cinematography. 16 mm film. Projection. Specification for projector usage of 16 mm motion-picture films for direct front projection
BS 4873:1986 BS 4873:1986. Specification for aluminium alloy windows
BS 6755-1:1986 BS 6755-1:1986. Testing of valves. Specification for production pressure testing requirements
BS EN ISO 4536:1995 BS EN ISO 4536:1995. Metallic and non-organic coatings on metallic substrates. Saline droplets corrosion test (SD test)
BS 6805-1:1987, EN 27574-1:1988,ISO 7574-1:1985 BS 6805-1:1987, EN 27574-1:1988,ISO 7574-1:1985. Statistical methods for determining and verifying stated noise emission values of machinery and equipme
BS 6805-2:1987, EN 27574-2:1988,ISO 7574-2:1985 BS 6805-2:1987, EN 27574-2:1988,ISO 7574-2:1985. Statistical methods for determining and verifying stated noise emission values of machinery and equipme
BS 6805-3:1987, EN 27574-3:1988,ISO 7574-3:1985 BS 6805-3:1987, EN 27574-3:1988,ISO 7574-3:1985. Statistical methods for determining and verifying stated noise emission values of machinery and equipme
BS 6805-4:1987, EN 27574-4:1988,ISO 7574-4:1985 BS 6805-4:1987, EN 27574-4:1988,ISO 7574-4:1985. Statistical methods for determining and verifying stated noise emission values of machinery and equipme
BS 1344:Part 9:1987, ISO 2744-1983 BS 1344:Part 9:1987, ISO 2744-1983. Methods of testing vitreous enamel finishes. Determination of resistance to boiling water and water vapour
BS 6792:1986 BS 6792:1986. Specification for agricultural trailer and trailed machinery drawbar jacks
BS 2M 45:Part 2:1986 BS 2M 45:Part 2:1986. Aircraft tyres and rims. Methods of test for tyres
BS 1722-4:1986 BS 1722-4:1986. Fences. Specification for cleft chestnut pale fences
BS 3473-2:1987, ISO 719-1985 BS 3473-2:1987, ISO 719-1985. Chemical resistance of glass used in the production of laboratory glassware. Method for determination of hydrolytic resistance of glass grain
BS 3473-5:1987, ISO 1776-1985 BS 3473-5:1987, ISO 1776-1985. Chemical resistance of glass used in the production of laboratory glassware. Method for determination of resistance of glass to attack by 6
BS 6790:1987, EN 27491:1991,ISO 7491-1985 BS 6790:1987, EN 27491:1991,ISO 7491-1985. Method for determination of colour stability of dental polymeric materials
BS 770-8:1987 BS 770-8:1987. Methods for chemical analysis of cheese. Determination of nitrogen content (reference method)
BS 873-4:1987 BS 873-4:1987. Road traffic signs and internally illuminated bollards. Specification for road studs
BS 1743-8:1987, ISO 8069:1986 BS 1743-8:1987, ISO 8069:1986. Methods for analysis of dried milk and dried milk products. Determination of lactic acid and lactates content of dried milk
BS 2772-3:1987 BS 2772-3:1987. Colliery haulage and winding equipment. Specification for 1.5% manganese steel castings
BS 3332:1987 BS 3332:1987. Specification for white metal bearing alloy ingots
BS 3396-2:1987 BS 3396-2:1987. Woven glass fibre fabrics for plastics reinforcement. Specification for desized fabrics
BS 3424-10:1987 BS 3424-10:1987. Testing coated fabrics. Methods 12A and 12B Determination of surface drag
BS 3473-3:1987, ISO 720-1985 BS 3473-3:1987, ISO 720-1985. Chemical resistance of glass used in the production of laboratory glassware. Method for determination of hydrolytic resistance of glass grain
BS 6725:1986, IEC 60814:1985 BS 6725:1986, IEC 60814:1985. Method for determination of water in liquid dielectrics by automatic coulometric Karl Fischer titration
BS 6787:1987, ISO 8249-1985 BS 6787:1987, ISO 8249-1985. Method for determination of ferrite number in austenitic weld metal deposited by covered Cr-Ni steel electrodes
BS 6811:Part 2:Section 2.1:1987, IEC 60851-1:1985 BS 6811:Part 2:Section 2.1:1987, IEC 60851-1:1985. Winding wires. Methods of test. General test conditions and schedule of tests
BS 6811:Part 2:Section 2.2:1987, IEC 60851-2:1985 BS 6811:Part 2:Section 2.2:1987, IEC 60851-2:1985. Winding wires. Methods of test. Determination of dimensions
BS EN 60851-4:1995 BS EN 60851-4:1995. Methods of test for winding wires. Chemical properties
BS 6811:Part 2:Section 2.6:1987, IEC 60851-6:1985 BS 6811:Part 2:Section 2.6:1987, IEC 60851-6:1985. Winding wires. Methods of test. Thermal properties
BS AU 210-1:1987 BS AU 210-1:1987. Drawbars for caravans and light trailers. Method of calculation for the mechanical strength of steel drawbars
BS 5258-13:1986 BS 5258-13:1986. Safety of domestic gas appliances. Specification for convector heaters
BS 6813:1987 BS 6813:1987. Specification for trade cutlery for use with food
BS AU 207:1986 BS AU 207:1986. Specification for dimensions of car radio installation space
BS 3396-3:1987 BS 3396-3:1987. Woven glass fibre fabrics for plastics reinforcement. Specification for finished fabrics for use with polyester resin systems
BS 6579-5:1986 BS 6579-5:1986. Safety fences and barriers for highways. Specification for open box beam safety fence (single height)
BS AU 213:1987, ISO 8703:1986 BS AU 213:1987, ISO 8703:1986. Specification for calculation of forces on control devices for inertia braking of caravans and light trailers
BS 5465:1987 BS 5465:1987. Specification for electrodes and fluxes for the submerged arc welding of austenitic stainless steels
BS 6806-1:1987 BS 6806-1:1987. Formaldehyde in textiles. Method for determination of total formaldehyde
BS 6806-2:1987 BS 6806-2:1987. Formaldehyde in textiles. Method for determination of 'free' formaldehyde
BS 6806-3:1987 BS 6806-3:1987. Formaldehyde in textiles. Method for determination of released formaldehyde
BS 6818-2:1987, ISO 8759-2:1985 BS 6818-2:1987, ISO 8759-2:1985. Front-mounted linkage and power take-off for agricultural wheeled tractors. Specification for front linkage
BS F 130:1987 BS F 130:1987. Specification for rubber bonded compressed aramid fibre jointing material for aerospace purposes
BS 5258-1:1986 BS 5258-1:1986. Safety of domestic gas appliances. Specification for central heating boilers and circulators
BS 6818-1:1987, ISO 8759-1:1985 BS 6818-1:1987, ISO 8759-1:1985. Front-mounted linkage and power take-off for agricultural wheeled tractors. Specification for power take-off
BS AU 211:1987, ISO 8719-1986 BS AU 211:1987, ISO 8719-1986. Specification for dimensions of four-hole flanges for gear-driven air compressors for commercial vehicles and buses
BS AU 215-1:1987, ISO 7706-1985 BS AU 215-1:1987, ISO 7706-1985. Power take offs (PTOs). Specification for dimensions for clearance envelope for commercial road vehicles
BS AU 215-2:1987, ISO 7804-1985 BS AU 215-2:1987, ISO 7804-1985. Power take offs (PTOs). Specification for dimensions of side openings for commercial road vehicles
BS 1902-7.0:1987 BS 1902-7.0:1987. Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Introduction and definitions
BS 1902-7.1:1987 BS 1902-7.1:1987. Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Guidance on sampling (of unshaped refractories)
BS 1902-7.2:1987 BS 1902-7.2:1987. Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Testing of material as supplied and received (method 1902-702)
BS 1902-7.3:1987 BS 1902-7.3:1987. Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from dense castables by vibration (method
BS 1902-7.4:1987 BS 1902-7.4:1987. Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from insulating castables (method 1902-704
BS 1902-7.5:1987 BS 1902-7.5:1987. Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from mouldables and ramming mixes (method
BS EN 60873:1993 BS EN 60873:1993. Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems
BS 5514:Part 1:1987, ISO 3046/1-1986 BS 5514:Part 1:1987, ISO 3046/1-1986. Reciprocating internal combustion engines: performance. Specification for standard reference conditions and declarations of p
BS 6290:Part 4:1987 BS 6290:Part 4:1987. Lead-acid stationary cells and batteries. Specification for lead-acid valve regulated sealed type
BS 5240:Part 1:1987 BS 5240:Part 1:1987. Industrial safety helmets. Specification for construction and performance
BS 6729:1987 BS 6729:1987. Method for determination of the dynamic fracture toughness of metallic materials
BS AU 214a-1:1987, ISO 8667:1986 BS AU 214a-1:1987, ISO 8667:1986. Gearbox flanges. Specification for dimensions of cross-tooth gearbox flanges, type T, for commercial vehicles and buses
BS 6732:1987, EN 50043:1985 BS 6732:1987, EN 50043:1985. Specification for low-voltage switchgear and controlgear for industrial use. Size numbers and gauges for flat connections
BS 4575:Part 2:1987 BS 4575:Part 2:1987. Fluid power transmission and control systems. Code of practice for pneumatic equipment and systems
BS 684:Part 1:Section 1.14:1987 BS 684:Part 1:Section 1.14:1987. Methods of analysis of fats and fatty oils. Physical methods. Determination of colour
BS 3424-17:1987 BS 3424-17:1987. Testing coated fabrics. Method 20. Method for determination of dimensional stability to water immersion
BS 3424-20:1987 BS 3424-20:1987. Testing coated fabrics. Method 23. Method for determination of dimensional changes on mechanical relaxation at zero tension
BS 4317:Part 17:1987, ISO 7305-1986 BS 4317:Part 17:1987, ISO 7305-1986. Methods of test for cereals and pulses. Determination of fat acidity
BS 4999-108:1987 BS 4999-108:1987. General requirements for rotating electrical machines. Specification for terminal markings and direction of rotation
BS 4999:Part 112:1987 BS 4999:Part 112:1987. General requirements for rotating electrical machines. Specification for starting performance of single-speed three-phase cage induction motors
BS 4999-140:1987 BS 4999-140:1987. General requirements for rotating electrical machines. Specification for voltage regulation and parallel operation of a.c. synchronous generators
BS 4999-143:1987 BS 4999-143:1987. General requirements for rotating electrical machines. Specification for tests
BS 506-1:1987 BS 506-1:1987. Methanol for industrial use. Specification for methanol
BS 509-1:1987 BS 509-1:1987. Acetone for industrial use. Specification for acetone
BS 3900:Part J4:1987 BS 3900:Part J4:1987. Methods of test for paints. Testing of coating powders. Determination of the storage stability of coating powders
BS 4317-2:1987, ISO 711-1985 BS 4317-2:1987, ISO 711-1985. Methods of test for cereals and pulses. Determination of moisture content of cereals and cereal products (reference method)
BS 4317:Part 3:1987, ISO 712-1986 BS 4317:Part 3:1987, ISO 712-1986. Methods of test for cereals and pulses. Determination of moisture content of cereals and cereal products (routine method)
BS 3221-6:1987 BS 3221-6:1987. Medicine measures. Specification for free-standing plastics medicine measuring spoons of 5 mL capacity
BS 5485:Part 2:1987, ISO 4510/2-1986 BS 5485:Part 2:1987, ISO 4510/2-1986. Service tools used with earth-moving machinery. Guide to common repair tools: mechanical pullers and pushers
BS 6149:Part 1:1987, ISO 5366-1:1986 BS 6149:Part 1:1987, ISO 5366-1:1986. Tracheostomy tubes. Specification for connectors
BS 6153:1987, ISO 5364-1986 BS 6153:1987, ISO 5364-1986. Specification for oropharyngeal airways
BS 6747:1987 BS 6747:1987. Specification for orthodontic resins
BS 6822:1987, ISO 8532-1986 BS 6822:1987, ISO 8532-1986. Specification for format for transmission of certificate numbers of securities
BS 6823:1987, ISO 7133-1985 BS 6823:1987, ISO 7133-1985. Glossary of terminology and content of commercial specifications for tractor-scrapers used for earth-moving, and their equipment
BS 1470:1987 BS 1470:1987. Specification for wrought aluminium and aluminium alloys for general engineering purposes: plate, sheet and strip
BS 4999:Part 101:1987 BS 4999:Part 101:1987. General requirements for rotating electrical machines. Specification for rating and performance
BS 6212:1987, ISO 3271-1985 BS 6212:1987, ISO 3271-1985. Method for determination of tumbler strength of iron ores
BS 6824:1987, ISO 3450-1985 BS 6824:1987, ISO 3450-1985. Specification for performance and test of braking systems for wheeled earth-moving machinery
BS 67:1987 BS 67:1987. Specification for ceiling roses
BS 3730-1:1987, ISO 6318:1985 BS 3730-1:1987, ISO 6318:1985. Assessment of departures from roundness. Glossary of roundness measurement terms
BS 6393:1987, ISO 5436-1985 BS 6393:1987, ISO 5436-1985. Specification for calibration of stylus instruments
BS 6740:1986, ISO 4291-1985 BS 6740:1986, ISO 4291-1985. Method for determining departures from roundness by measuring variations in radius
BS 6741:Part 1:1987, ISO 4287-1:1984 BS 6741:Part 1:1987, ISO 4287-1:1984. Glossary of surface roughness terms. Surface and its parameters
BS 6741:Part 2:1987, ISO 4287-2:1984 BS 6741:Part 2:1987, ISO 4287-2:1984. Glossary of surface roughness terms. Measurement of surface roughness parameters
BS 6811-1.1:1987 BS 6811-1.1:1987. Winding wires. Basic dimensions. Specification for diameters of conductors for round winding wires
BS 6831:1987, ISO 7846-1985 BS 6831:1987, ISO 7846-1985. Specification for industrial real-time FORTRAN
BS 1493:1987 BS 1493:1987. Method of specifying general purpose polystyrene (PS) moulding and extrusion materials
BS 2634-1:1987, ISO 2632-1:1985 BS 2634-1:1987, ISO 2632-1:1985. Roughness comparison specimens. Specification for turned, ground, bored, milled, shaped and planed specimens
BS 2634-2:1987, ISO 2632-2:1985 BS 2634-2:1987, ISO 2632-2:1985. Roughness comparison specimens. Specification for spark-eroded, shot-blasted, grit-blasted, and polished specimens
BS 3126:1987 BS 3126:1987. Method of specifying toughened polystyrene (SB) moulding and extrusion materials
BS 3900-B15:1987 BS 3900-B15:1987. Methods of test for paints. Rapid method for estimation of lead in liquid paints
BS EN ISO 3882:1995 BS EN ISO 3882:1995. Metallic and other non-organic coatings. Review of methods of measurement of thickness
BS 5527:Part 1:1987, ISO 3471/1-1986 BS 5527:Part 1:1987, ISO 3471/1-1986. Roll-over protective structures on earth-moving machinery: laboratory tests and performance requirements. Specification for c
BS 535:1987 BS 535:1987. Specification for light sources for miners' portable electric lamps
BS 1746:1987 BS 1746:1987. Specification for domestic pressure cookers
BS 4471:1987 BS 4471:1987. Specification for sizes of sawn and processed softwood
BS 6743:1987 BS 6743:1987. Specification for performance of handles and handle assemblies attached to cookware
BS 8201:1987 BS 8201:1987. Code of practice for flooring of timber, timber products and wood based panel products
DD 140-2:1987 DD 140-2:1987. Wall ties. Recommendations for design of wall ties
BS 5759:1987 BS 5759:1987. Specification for webbing load restraint assemblies for use in surface transport
BS 3492:1987 BS 3492:1987. Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels
BS 874-3.1:1987 BS 874-3.1:1987. Methods for determining thermal insulating properties. Tests for thermal transmittance and conductance. Guarded hot-box method
BS 1123-1:1987 BS 1123-1:1987. Safety valves, gauges and fusible plugs for compressed air or inert gas installations. Code of practice for installation
BS 2000:Part 0:Addendum No. 1:1987 BS 2000:Part 0:Addendum No. 1:1987. Methods of test for petroleum and its products. Standard reagents and thermometers
BS EN ISO 3457:1995 BS EN ISO 3457:1995. Earth-moving machinery. Guards and shields. Definitions and specifications
BS 6068-2.29:1987, ISO 8288-1986 BS 6068-2.29:1987, ISO 8288-1986. Water quality. Physical, chemical and biochemical methods. Determination of cobalt, nickel, copper, zinc, cadmium and lead: flame ato
BS 6816:1987, EN 23950:1989,ISO 3950:1984 BS 6816:1987, EN 23950:1989,ISO 3950:1984. Designation system for teeth and areas of the oral cavity
BS 5942-8:1987, IEC 60581-8:1986 BS 5942-8:1987, IEC 60581-8:1986. High fidelity audio equipment and systems; minimum performance requirements. Specification for combination equipment
BS M 62:1987, ISO 7661-1984 BS M 62:1987, ISO 7661-1984. Specification for design and qualification testing of clamp blocks for fluid system tube lines having axial alignment. Metric series
BS 5042:1987 BS 5042:1987. Specification for bayonet lampholders
BS 6809:1987 BS 6809:1987. Method for calibration of radiometers for use in fire testing
BS 6827:1987, ISO 8455-1986 BS 6827:1987, ISO 8455-1986. Guide to storage and transport of green coffee in bags
BS 8010-2.1:1987 BS 8010-2.1:1987. Code of practice for pipelines. Pipelines on land: design, construction and installation. Ductile iron
BS 2544:1987 BS 2544:1987. Methods for determination of thickness of textile materials
BS 6114:1987, ISO 6484-1986 BS 6114:1987, ISO 6484-1986. Method for measurement of volumetric ratings of elevating scrapers used for earth-moving
BS 6812:Part 1:1987, ISO 6393-1985 BS 6812:Part 1:1987, ISO 6393-1985. Airborne noise emitted by earth-moving machinery. Method of measurement of exterior noise in a stationary test condition
BS 6812:Part 2:1987, ISO 6394-1985 BS 6812:Part 2:1987, ISO 6394-1985. Airborne noise emitted by earth-moving machinery. Method of measurement at the operator's position in a stationary test condition
BS EN 20140-9:1994, BS 2750-9:1987,ISO 140-9:1985 BS EN 20140-9:1994, BS 2750-9:1987,ISO 140-9:1985. Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measur
BS 3156-11.1.2:1987, ISO 6975-1986 BS 3156-11.1.2:1987, ISO 6975-1986. Analysis of fuel gases. Methods for non-manufactured gases. Hydrocarbons and inert gases. Determination of hydrocarbons from buta
BS 6288-6:1987, IEC 60094-6:1985 BS 6288-6:1987, IEC 60094-6:1985. Magnetic tape sound recording and reproducing systems. Specification for reel-to-reel systems
BS 6829-1.1:1987, ISO 6844-1983 BS 6829-1.1:1987, ISO 6844-1983. Analysis of surface active agents (raw materials). General methods. Method for determination of mineral sulphate content
BS 3G 101:1987 BS 3G 101:1987. Specification for general requirements for mechanical and electromechanical aircraft indicators
BS 3735:1987 BS 3735:1987. Specification for plastics and rubber dustbin lids
BS 5350:Part G1:1987 BS 5350:Part G1:1987. Methods of test for adhesives. Tests on anaerobic adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners
BS 5350-G2:1987 BS 5350-G2:1987. Methods of test for adhesives. Tests on anaerobic adhesives. Determination of static shear strength of anaerobic adhesives
BS 5350-G3:1987 BS 5350-G3:1987. Methods of test for adhesives. Determination of ability of anaerobic adhesives to set on metal surfaces
BS 6808-1:1987 BS 6808-1:1987. Coordinate measuring machines. Glossary of terms
BS 4999-102:1987, IEC 60034-2:1972,IEC 60034-2A:1974 BS 4999-102:1987, IEC 60034-2:1972,IEC 60034-2A:1974. General requirements for rotating electrical machines. Methods for determining losses and eff
BS 4999-103:1987 BS 4999-103:1987. General requirements for rotating electrical machines. Specification for symbols
BS 4999-111:1987 BS 4999-111:1987. General requirements for rotating electrical machines. Specification for built-in thermal protection for electric motors rated at 660 volts a.c. and below
BS 4999-141:1987 BS 4999-141:1987. General requirements for rotating electrical machines. Specification for standard dimensions
BS 4999-142:1987 BS 4999-142:1987. General requirements for rotating electrical machines. Specification for mechanical performance: vibration
BS 4999-144:1987 BS 4999-144:1987. General requirements for rotating electrical machines. Specification for the insulation of bars and coils of high voltage machines, including test methods
BS 4651-2:1987, ISO 7108-1985 BS 4651-2:1987, ISO 7108-1985. Ammonia solution. Method for determination of ammonia content
BS 4651-3:1987, ISO 7109-1985 BS 4651-3:1987, ISO 7109-1985. Ammonia solution. Method for determination of residue on evaporation
BS 6710:1987 BS 6710:1987. Specification for dimensions of chain wheel tooth forming tools
BS 3195-3:1987, EN 58:1984 BS 3195-3:1987, EN 58:1984. Methods for sampling petroleum products. Method for sampling bituminous binders
BS CECC 51001:1987 BS CECC 51001:1987. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: mercury wetted change-over contact units, magnet
BS 1125:1987 BS 1125:1987. Specification for WC flushing cisterns (including dual flush cisterns and flush pipes)
BS AU 50:Part 2:Section 7:1987 BS AU 50:Part 2:Section 7:1987. Tyres and wheels. Wheels and rims. Code of practice for the selection and care of wheels for commercial vehicles
BS 5041-1:1987 BS 5041-1:1987. Fire hydrant systems equipment. Specification for landing valves for wet risers
BS 5041-2:1987 BS 5041-2:1987. Fire hydrant systems equipment. Specification for landing valves for dry risers
BS 5982:1987, ISO 6014-1986 BS 5982:1987, ISO 6014-1986. Method for determination of ground speed of earth-moving machinery
BS 6102-10:1987, ISO 8488-1986 BS 6102-10:1987, ISO 8488-1986. Cycles. Specification for screw threads used to assemble head fittings on bicycle forks
BS 6319-9:1987 BS 6319-9:1987. Testing of resin and polymer/cement compositions for use in construction. Method for measurement and classification of peak exotherm temperature
BS 6319-10:1987 BS 6319-10:1987. Testing of resin and polymer/cement compositions for use in construction. Method for measurement of temperature of deflection under a bending stress
BS CECC 96000:1987 BS CECC 96000:1987. Harmonized system of quality assessment for electronic components. Generic specification: electromechanical switches
BS 1902-9.1:1987 BS 1902-9.1:1987. Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of alumino-silicate refractories by X-ray fluorescence
BS 1902-9.2:1987 BS 1902-9.2:1987. Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of silica refractories by X-ray fluorescence
BS 5685-5:1987 BS 5685-5:1987. Electricity meters. Specification for input and output switching or logic arrangements for multi-rate registers for electricity meters
BS 6168:1987 BS 6168:1987. Specification for non-metallic spur gears
PD 6512-3:1987 PD 6512-3:1987. Use of elements of structural fire protection with particular reference to the recommendations given in BS 5588 'Fire precautions in the design and construction of build
BS A 297:1987, ISO 7994-1985 BS A 297:1987, ISO 7994-1985. Specification for internal drive, offset cruciform recess (Torq-Set(R)) for rotary fastening devices. Metric series
BS 1432:1987 BS 1432:1987. Specification for copper for electrical purposes: high conductivity copper rectangular conductors with drawn or rolled edges
BS 5993:1987 BS 5993:1987. Specification for leather-covered cricket balls
BS 6782-1:1987, ISO 3251-1974 BS 6782-1:1987, ISO 3251-1974. Binders for paints. Method for determination of volatile and non-volatile content
BS 6782:Part 2:1987, ISO 3681-1983 BS 6782:Part 2:1987, ISO 3681-1983. Binders for paints. Method for determination of saponification value (titrimetric method)
BS 6782:Part 3:1987, ISO 3682-1983 BS 6782:Part 3:1987, ISO 3682-1983. Binders for paints. Method for determination of acid value (titrimetric method)
BS 6782:Part 4:1987, ISO 4629-1978 BS 6782:Part 4:1987, ISO 4629-1978. Binders for paints. Method for determination of hydroxyl value (titrimetric method)
BS 6782:Part 5:1987, ISO 4630-1981 BS 6782:Part 5:1987, ISO 4630-1981. Binders for paints. Method for estimation of colour of clear liquids by the Gardner colour scale
BS 6782-6:1987, ISO 4625-1980 BS 6782-6:1987, ISO 4625-1980. Binders for paints. Method for determination of softening point (ring and ball method)
BS 8203:1987 BS 8203:1987. Code of practice for installation of sheet and tile flooring
BS 4140-23:1987, ISO 8008-1986 BS 4140-23:1987, ISO 8008-1986. Methods of test for aluminium oxide. Determination of specific surface area by nitrogen adsorption (single-point method)
BS 4639:1987 BS 4639:1987. Specification for brakes and braking systems for towed agricultural vehicles
BS 1753:1987 BS 1753:1987. Specification for safety requirements for children's cots for domestic use
BS 4790:1987 BS 4790:1987. Method for determination of the effects of a small source of ignition on textile floor coverings (hot metal nut method)
BS M 64:1987, ISO 8177-1986 BS M 64:1987, ISO 8177-1986. Specification for dimensions of omega clamps (saddle clamps) for fluid tubing installations
BS 6798:1987 BS 6798:1987. Specification for installation of gas-fired hot water boilers of rated input not exceeding 60 kW
BS 6044:1987 BS 6044:1987. Specification for pavement marking paints
BS 6161-14:1987 BS 6161-14:1987. Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of infra-red reflectance
BS 6161:Part 9:1987 BS 6161:Part 9:1987. Methods of test for anodic oxidation coatings on aluminium and its alloys. Measurement of wear properties with an abrasive wheel wear test apparatus
BS 6161-12:1987 BS 6161-12:1987. Methods of test for anodic oxidation coatings on aluminium and its alloys. Measurement of specular reflectance and specular gloss at angles of 20°, 45°, 60° or 85°
BS EN 28029:1993, ISO 8029:1985 BS EN 28029:1993, ISO 8029:1985. Plastics hose. General purpose collapsible water hose, textile reinforced. Specification
BS 3111-1:1987 BS 3111-1:1987. Steel for cold forged fasteners and similar components. Specification for carbon and low alloy steel wire
BS 3456-101:1987 BS 3456-101:1987. Specification for safety of household and similar electrical appliances. General requirements
BS 4140-24:1987, ISO 8220-1986 BS 4140-24:1987, ISO 8220-1986. Methods of test for aluminium oxide. Determination of fine particle size distribution (method using electroformed sieves)
BS 6161-15:1987 BS 6161-15:1987. Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of electrical breakdown potential
BS 6846:1987, ISO 6806-1984 BS 6846:1987, ISO 6806-1984. Specification for rubber hoses and hose assemblies for use in oil burners
BS 6840:Part 13:1987, IEC 60268-13:1985 BS 6840:Part 13:1987, IEC 60268-13:1985. Sound system equipment. Guide for listening tests on loudspeakers
BS 6840-1:1987, IEC 60268-1:1985 BS 6840-1:1987, IEC 60268-1:1985. Sound system equipment. Methods for specifying and measuring general characteristics used for equipment performance
BS 1615:1987 BS 1615:1987. Method for specifying anodic oxidation coatings on aluminium and its alloys
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
