BIS Standards Catalogue
BS TA 41:1971 BS TA 41:1971. Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm2) (limiting ruling section over 25 mm up to and
BS TA 42:1971 BS TA 42:1971. Specification for forgings of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm2) (limiting ruling section over 25 mm up to and inclu
BS TA 43:1972 BS TA 43:1972. Specification for forging stock of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm2) (limiting ruling section 65 mm)
BS TA 44:1972 BS TA 44:1972. Specification for forgings of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm2) (limiting ruling section 65 mm)
BS TA 45:1973 BS TA 45:1973. Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 N/mm2) (limiting ruling section 25 mm)
BS TA 46:1973 BS TA 46:1973. Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 N/mm2) (limiting ruling section over 25 mm u
BS TA 47:1973 BS TA 47:1973. Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 N/mm2) (limiting ruling section 100 mm)
BS TA 48:1973 BS TA 48:1973. Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1200 N/mm2) (limiting ruling section 100 mm)
BS TA 49:1973 BS TA 49:1973. Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm2) (limiting ruling section over 100 mm
BS TA 50:1973 BS TA 50:1973. Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm2) (limiting ruling section over 100 mm up to and includ
BS TA 51:1973 BS TA 51:1973. Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm2) (limiting ruling section over 100 mm up to and including 1
BS TA 52:1973 BS TA 52:1973. Specification for sheet and strip of titanium-copper alloy (tensile strength 690-920 N/mm2)
BS TA 53:1973 BS TA 53:1973. Specification for bar and section for machining of titanium-copper alloy (tensile strength 650-880 N/mm2) (limiting ruling section 75 mm)
BS TA 54:1973 BS TA 54:1973. Specification for forging stock of titanium-copper alloy (tensile strength 650-880 N/mm2) (limiting ruling section 75 mm)
BS TA 55:1973 BS TA 55:1973. Specification for forgings of titanium-copper alloy (tensile strength 650-880 N/mm2) (limiting ruling section 75 mm)
BS TA 56:1974 BS TA 56:1974. Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm)
BS TA 57:1974 BS TA 57:1974. Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (maximum thickness 65 mm)
BS 6V 3:1943 BS 6V 3:1943. Specification for aircraft material. High strength plywood for aircraft
BS 3V 4:1929 BS 3V 4:1929. Specification for aircraft material. Ash
BS 5V 7:1952 BS 5V 7:1952. Specification for mahogany for use in airscrews
BS 2V 35:1966 BS 2V 35:1966. Specification for plywood for aeronautical purposes
BS 2V 37:1968 BS 2V 37:1968. Specification for Sitka spruce as finished timber
BS V 38:1967 BS V 38:1967. Specification for Sitka spruce as rough timber
BS TA 58:1974 BS TA 58:1974. Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm)
BS TA 59:1980 BS TA 59:1980. Specification for sheet and strip of titanium-aluminium-vanadium alloy (tensile strength 920 MPa to 1180 MPa)
BS 6W 8:1938 BS 6W 8:1938. Tie rods (swaged) (No. 4 B.A. to ? inch B.S.F. inclusive) for aircraft purposes
BS 2W 11:1967 BS 2W 11:1967. Specification for aircraft material. Preformed corrosion-resisting steel wire rope
BS W 13:1973 BS W 13:1973. Specification for preformed corrosion-resisting steel wire rope (ISO diameters and strengths)
BS 1704:1985, ISO 1770:1981 BS 1704:1985, ISO 1770:1981. Specification for solid-stem general purpose thermometers
BS 1384:Part 3:1985, ISO 5/3-1984 BS 1384:Part 3:1985, ISO 5/3-1984. Photographic density measurements. Specification for spectral conditions
BS 1384:Part 4:1985, ISO 5/4-1983 BS 1384:Part 4:1985, ISO 5/4-1983. Photographic density measurements. Specification for geometric conditions for reflection density
BS 1902-4.3:1985 BS 1902-4.3:1985. Methods of testing refractory materials. Properties measured under an applied stress. Determination of cold crushing strength of dense shaped products (method 1902-4
BS 4928:1985 BS 4928:1985. Specification for man-made fibre ropes
BS 4181-1:1985, ISO 4650-1984 BS 4181-1:1985, ISO 4650-1984. Identification of rubbers by infra-red spectrometry. Method for identification of hydrocarbon, chloroprene, nitrile and chlorosulphonated p
BS 6368:1983, IEC 60701:1981 BS 6368:1983, IEC 60701:1981. Specification for axial lead cores made of magnetic oxides or iron powder
BS 6310:1982, IEC 60711:1981 BS 6310:1982, IEC 60711:1981. Specification for occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts
BS 6329:1982, IEC 60714:1981 BS 6329:1982, IEC 60714:1981. Method of expression of the properties of spectrum analyzers
BS 6397:1983, IEC 60263:1982 BS 6397:1983, IEC 60263:1982. Specification for scales and sizes for plotting frequency characteristics and polar diagrams
BS 6438-1:1984, IEC 60746-1:1982 BS 6438-1:1984, IEC 60746-1:1982. Electrochemical analyzers. Method for specifying performance common to all analyzers
BS 6438-2:1984, IEC 60746-2:1982 BS 6438-2:1984, IEC 60746-2:1982. Electrochemical analyzers. Method for specifying performance of pH value analyzers
BS 6513-1:1984 BS 6513-1:1984. Wideband cabled distribution systems. Glossary of terms
BS 6513-2:1984 BS 6513-2:1984. Wideband cabled distribution systems. Methods of measurement
BS 6513:Part 3:1984 BS 6513:Part 3:1984. Wideband cabled distribution systems. Specification for performance requirements, for downstream television and f.m. sound radio signals
BS 6513-4:1984 BS 6513-4:1984. Wideband cabled distribution systems. Specification for performance requirements, for upstream television
BS 6522:1984 BS 6522:1984. Methods for determination of percentage water saturation of insulating oil
BS 6551:1985 BS 6551:1985. Specification for polyester fibre woven tapes for electrical purposes
BS 6604:1985 BS 6604:1985. Code of practice for safe operation of starter batteries
BS 6447:1984 BS 6447:1984. Specification for absolute and gauge pressure transmitters with electrical outputs
BS 6553:1984, IEC 60787:1983 BS 6553:1984, IEC 60787:1983. Guide for selection of fuse links of high-voltage fuses for transformer circuit applications
BS 6581:1985, IEC 60694:1980 BS 6581:1985, IEC 60694:1980. Specification for common requirements for high-voltage switchgear and controlgear standards
BS 6430:1983, ISO 2955-1983 BS 6430:1983, ISO 2955-1983. Method for representing SI and other units in information processing systems with limited character sets
BS 6488:1984 BS 6488:1984. Code of practice for configuration management of computer-based systems
BS 6541:1985, ISO 7064-1983 BS 6541:1985, ISO 7064-1983. Specification for check character systems for use in information interchange, and guidance on choice and methods of application
BS 3939:Part 2:1985, IEC 60617-2:1983 BS 3939:Part 2:1985, IEC 60617-2:1983. Graphical symbols for electrical power, telecommunications and electronics diagrams. Symbol elements, qualifying symbols an
BS 3939:Part 3:1985, IEC 60617-3:1983 BS 3939:Part 3:1985, IEC 60617-3:1983. Graphical symbols for electrical power, telecommunications and electronics diagrams. Conductors and connecting devices
BS 3939:Part 4:1985, IEC 60617-4:1983 BS 3939:Part 4:1985, IEC 60617-4:1983. Graphical symbols for electrical power, telecommunications and electronics diagrams. Passive components
BS 3939:Part 5:1985, IEC 60617-5:1983 BS 3939:Part 5:1985, IEC 60617-5:1983. Graphical symbols for electrical power, telecommunications and electronics diagrams. Semiconductors and electron tubes
BS 638:Part 8:1984 BS 638:Part 8:1984. Arc welding power sources, equipment and accessories. Specification for electrode holders and hand held torches and guns for MIG, MAG and TIG welding
BS 2782-3:Method 346A:1984 BS 2782-3:Method 346A:1984. Methods of testing plastics. Mechanical properties. Determination of cohesion between layers of laminated tube
BS 3894-2:1985, ISO 2566/2-1984 BS 3894-2:1985, ISO 2566/2-1984. Method for converting elongation values for steel. Method of conversion for application to austenitic steels
BS 4870-3:1985 BS 4870-3:1985. Specification for approval testing of welding procedures. Arc welding of tube to tube-plate joints in metallic materials
BS 4871-3:1985 BS 4871-3:1985. Specification for approval testing of welders working to approved welding procedures. Arc welding of tube to tube-plate joints in metallic materials
BS 5600-2.2.3:1984 BS 5600-2.2.3:1984. Powder metallurgical materials and products. Methods of sampling and testing metallic powders. Determination of apparent density. Oscillating funnel method
BS 5600-2.6:1985 BS 5600-2.6:1985. Powder metallurgical materials and products. Methods of sampling and testing metallic powders. Determination of flowability by means of a calibrated funnel (Hall flo
BS 5655-9:1985 BS 5655-9:1985. Lifts and service lifts. Specification for guide rails
BS 6161:Part 6:1984, ISO 2931-1983 BS 6161:Part 6:1984, ISO 2931-1983. Methods of test for anodic oxidation coatings on aluminium and its alloys. Assessment of sealing quality by measurement of admitt
BS 6161-7:1984 BS 6161-7:1984. Methods of test for anodic oxidation coatings on aluminium and its alloys. Accelerated determination of light fastness of coloured anodic oxidation coatings using artifi
BS 6270-2:1985 BS 6270-2:1985. Code of practice for cleaning and surface repair of buildings. Concrete and precast concrete masonry
BS 6536:1985 BS 6536:1985. Specification for continuously hot-dip aluminium/silicon coated cold reduced carbon steel sheet and strip
BS 6542-1:1984, ISO 7665-1983 BS 6542-1:1984, ISO 7665-1983. File structure and labelling of flexible disk cartridges for information interchange. Specification for sequential file allocation structur
BS 6582:1985 BS 6582:1985. Specification for continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products
PD 6498:1981 PD 6498:1981. Detail drawings for fire propagation apparatus specified in BS 476:Part 6:1981
BS 5724-2.5:1985, IEC 60601-2-5:1984 BS 5724-2.5:1985, IEC 60601-2-5:1984. Medical electrical equipment. Particular requirements for safety. Specification for safety of ultrasonic therapy equipment
BS 1380:Part 5:1985, ISO 7187-1983 BS 1380:Part 5:1985, ISO 7187-1983. Speed of sensitized photographic materials. Method for determining the speed of direct positive colour print camera materials
BS 1494-1:1964 BS 1494-1:1964. Specification for fixing accessories for building purposes. Fixings for sheet, roof and wall coverings
BS 1743-19:1985 BS 1743-19:1985. Methods for analysis of dried milk and dried milk products. Determination of scorched particles content
BS 2000-364:1985 BS 2000-364:1985. Methods of test for petroleum and its products. Calculated cetane index of diesel fuels (range below 55)
BS 3424-14:1985 BS 3424-14:1985. Testing coated fabrics. Method 16. Methods for determination of colour fastness to wet and dry rubbing and determination of resistance to printwear
BS 3951:Part 1:Section 1.6:1985, ISO 6346-1984 BS 3951:Part 1:Section 1.6:1985, ISO 6346-1984. Freight containers. General. Specification for coding, identification and marking
BS 4327:Part 3:1984, ISO 476-1982 BS 4327:Part 3:1984, ISO 476-1982. Glossary of terms relating to the winding of textile yarns. Pirn winders
BS 4656-33:1985, ISO 7572:1984 BS 4656-33:1985, ISO 7572:1984. Accuracy of machine tools and methods of test. Specification for floor plates
BS 4753:Part 5:1985, ISO 5250-1982 BS 4753:Part 5:1985, ISO 5250-1982. Dyeing and finishing machines. Glossary of terms for stenters
BS 5086-4:1985 BS 5086-4:1985. Analysis of butter. Method for determination of salt content (reference method)
BS 5131-1.9:1985 BS 5131-1.9:1985. Methods of test for footwear and footwear materials. Adhesives. Measurement of green strength of adhesive joints
BS 6319-7:1985 BS 6319-7:1985. Testing of resin and polymer/cement compositions for use in construction. Method for measurement of tensile strength
BS 6331-4:1985 BS 6331-4:1985. Mounting dimensions of single rod double acting hydraulic cylinders. Specification for 63 bar series, including associated components
BS 6340-8:1985 BS 6340-8:1985. Shower units. Specification for prefabricated shower trays made from glazed ceramic
BS 6246:Part 3:1985 BS 6246:Part 3:1985. Industrial laundry machinery. Methods for the assessment of the effect of flatwork ironing machines on textiles
BS 6493-1.8:1985, IEC 60747-8:1984 BS 6493-1.8:1985, IEC 60747-8:1984. Semiconductor devices. Discrete devices. Recommendations for field-effect transistors
BS AU 50-2.8a:1985 BS AU 50-2.8a:1985. Tyres and wheels. Wheels and rims. Code of practice for the selection and care of wheels for passenger cars (including caravans and light trailers)
BS AU 174-2:1985, ISO 4925:1978 BS AU 174-2:1985, ISO 4925:1978. Hydraulic brake systems, using non-petroleum base brake fluids for road vehicles. Specification for non-petroleum base brake fluid
PD 6461:Part 1:1985 PD 6461:Part 1:1985. Vocabulary of metrology. Basic and general terms (international)
BS 2789:1985 BS 2789:1985. Specification for spheroidal graphite or nodular graphite cast iron
BS 3469:1985, ISO 1224-1984 BS 3469:1985, ISO 1224-1984. Specification for instrument precision rolling bearings (ball bearings)
BS 5117-1.1:1985 BS 5117-1.1:1985. Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for determination of physical and chemical properties. Ancillary procedures
BS 5117-1.2:1985 BS 5117-1.2:1985. Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for determination of physical and chemical properties. Determination of boil
BS 5117-1.3:1985 BS 5117-1.3:1985. Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for determination of physical and chemical properties. Determination of free
BS 5117-1.4:1985 BS 5117-1.4:1985. Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for determination of physical and chemical properties. Determination of foam
BS 5117-2.1:1985 BS 5117-2.1:1985. Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance. General procedures
BS 5117-2.2:1985 BS 5117-2.2:1985. Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance. Glassware tests
BS 5117-2.4:1985 BS 5117-2.4:1985. Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance. Static engine test
BS 5117-2.5:1985 BS 5117-2.5:1985. Testing corrosion inhibiting, engine coolant concentrate ('antifreeze'). Methods of test for corrosion inhibition performance. Field test
BS 5274:1985 BS 5274:1985. Specification for fire hose reels (water) for fixed installations
BS 6600-10:1985 BS 6600-10:1985. Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment. Specification for the outline dimensions of transformers and in
BS 6612:1985 BS 6612:1985. Specification for graduated compression hosiery
BS 8200:1985 BS 8200:1985. Code of practice for design of non-loadbearing external vertical enclosures of buildings
BS AU 88a:1985 BS AU 88a:1985. Recommendations for ratings for light duty cables for automobile use
BS AU 202a:1985 BS AU 202a:1985. Specification for rearward-facing restraining devices for infants for use in road vehicles
BS 6043-2.1:1985, ISO 6375-1980 BS 6043-2.1:1985, ISO 6375-1980. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Sampling
BS 6043-2.2:1985, ISO 8005-1984 BS 6043-2.2:1985, ISO 8005-1984. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of ash content of
BS 6618:1985, ISO 5990-1983 BS 6618:1985, ISO 5990-1983. Specification for photographic grade potassium sulphite, 650 g/L aqueous solution
BS 846:1985 BS 846:1985. Specification for burettes
BS 4F 59:1985 BS 4F 59:1985. Specification for braided linen (flax) cord for aerospace purposes
BS 5626-3.2:1985, IEC 60554-3-2:1983 BS 5626-3.2:1985, IEC 60554-3-2:1983. Cellulosic papers for electrical purposes. Specification for individual materials. Capacitor paper
BS 9610:1982 BS 9610:1982. Specification for quartz crystal units of assessed quality: generic data and methods of test
BS 9612 N008:1977 BS 9612 N008:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone
BS 9612 N007:1977 BS 9612 N007:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone
BS 9090:1977 BS 9090:1977. Variable capacitors of assessed quality: generic data and methods of test
BS 9093 N001:1977 BS 9093 N001:1977. Detail specification for variable pre-set air dielectric capacitors (type C). Vane type without locking device, not sealed. Full assessment level
BS 9150:1983 BS 9150:1983. Specification for electrical relays of assessed quality: generic data and methods of test
PD 6467:1972 PD 6467:1972. Arrangement of vibration tester
BS 812-119:1985 BS 812-119:1985. Testing aggregates. Method for determination of acid-soluble material in fine aggregate
BS 1902:Part 3:Section 3.13:1985 BS 1902:Part 3:Section 3.13:1985. Methods of testing refractory materials. General and textural properties. Measurement of corner and edge defects and other surface im
BS 1902:Part 4:Section 4.4:1984 BS 1902:Part 4:Section 4.4:1984. Methods of testing refractory materials. Properties measured under an applied stress. Determination of modulus of rupture at ambient te
BS 1902-4.6:1985 BS 1902-4.6:1985. Methods of testing refractory materials. Properties measured under an applied stress. Determination of resistance to abrasion at ambient temperature (abradability in
BS 1902:Part 4:Section 4.7:1985 BS 1902:Part 4:Section 4.7:1985. Methods of testing refractory materials. Properties measured under an applied stress. Determination of resistance to abrasion at elevat
BS 1902:Part 4:Section 4.9:1985 BS 1902:Part 4:Section 4.9:1985. Methods of testing refractory materials. Properties measured under an applied stress. Determination of refractoriness-under-load (risin
BS 5724-2.4:1985, IEC 60601-2-4:1983 BS 5724-2.4:1985, IEC 60601-2-4:1983. Medical electrical equipment. Particular requirements for safety. Specification for cardiac defibrillators and cardiac defibr
BS 5944-5:1985 BS 5944-5:1985. Measurement of airborne noise from hydraulic fluid power systems and components. Simplified method of determining sound power levels from pumps using an anechoic chamber
BS 6374-5:1985 BS 6374-5:1985. Lining of equipment with polymeric materials for the process industries. Specification for lining with rubbers
BS 9151:1972 BS 9151:1972. Rules for the preparation of detail specifications for all-or-nothing electromechanical relays of assessed quality. Full and basic assessment levels
BS E9375:1975, CECC 50005:1975 BS E9375:1975, CECC 50005:1975. Specification. Harmonized system of quality assessment for electronic components. Blank detail specification: voltage regulator diodes an
BS 5131-4.18:1985 BS 5131-4.18:1985. Methods of test for footwear and footwear materials. Other components. Longitudinal stiffness of steel shanks
BS 1041-2.1:1985 BS 1041-2.1:1985. Code for temperature measurement. Expansion thermometers. Guide to selection and use of liquid-in-glass thermometers
BS 1610:Part 2:1985 BS 1610:Part 2:1985. Materials testing machines and force verification equipment. Specification for the grading of equipment used for the verification of the forces applied by mate
BS 6613:1985, ISO 4863-1984 BS 6613:1985, ISO 4863-1984. Methods for specifying characteristics of resilient shaft couplings
BS QC 300401:1984, IEC 60384-2-1:1982,QC 300401 BS QC 300401:1984, IEC 60384-2-1:1982,QC 300401. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors f
BS QC 301201:1984, IEC 60384-16-1:1982,QC 301201 BS QC 301201:1984, IEC 60384-16-1:1982,QC 301201. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors
BS EN 150006:1993 BS EN 150006:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Variable capacitance diode(s)
BS 4148:1985, ISO 4-1984 BS 4148:1985, ISO 4-1984. Specification for abbreviation of title words and titles of publications
BS 6619:1985, ISO 7830-1983 BS 6619:1985, ISO 7830-1983. Specification for flammability performance of safety film for still photography
BS 6643-1:1985 BS 6643-1:1985. Recharging fire extinguishers (manufactured to BS 5423 'Specification for portable fire extinguishers'). Specification for procedure and materials
BS 6643-2:1985 BS 6643-2:1985. Recharging fire extinguishers (manufactured to BS 5423 'Specification for portable fire extinguishers'). Specification for powder refill charges
BS 6621:1985, ISO 5687-1981 BS 6621:1985, ISO 5687-1981. Method for determination of combine harvester capacity and unloading rate
BS 6630:1985, ISO 4645-1984 BS 6630:1985, ISO 4645-1984. Method for identification of antidegradants in rubber and rubber products by thin layer chromatography
BS 6632:1985, ISO 4867:1984 BS 6632:1985, ISO 4867:1984. Method for measurement and reporting of shipboard vibration data
BS 6633:1985, ISO 4868:1984 BS 6633:1985, ISO 4868:1984. Method for measurement and reporting of local vibration data of ship structures and equipment
BS 812-103.1:1985 BS 812-103.1:1985. Testing aggregates. Method for determination of particle size distribution. Sieve tests
BS AU 201-2:1985, ISO 7880-1984 BS AU 201-2:1985, ISO 7880-1984. Relays and flashers. Specification for arrangement and functional attribution of relay terminals for road vehicles
BS 6385:1983, ISO 6687-1982 BS 6385:1983, ISO 6687-1982. Method of specifying performance requirements for winches on forestry machinery
BS 5053:1985 BS 5053:1985. Methods of test for cordage and webbing slings and for fibre cores for wire ropes
BS 5306-3:1985 BS 5306-3:1985. Fire extinguishing installations and equipment on premises. Code of practice for selection, installation and maintenance of portable fire extinguishers
BS 6627:1985, ISO 5123-1984 BS 6627:1985, ISO 5123-1984. Recommendations for presentation of headers for microfiche of monographs and serials
BS 6631:1985, ISO 6807-1984 BS 6631:1985, ISO 6807-1984. Specification for rubber hoses and hose assemblies for rotary drilling and vibration applications
BS 5649-7:1985 BS 5649-7:1985. Lighting columns. Method for verification of structural design by calculation
BS 6475:1984 BS 6475:1984. Specification for processor system bus interface (Eurobus A)
BS 770-9:1985, ISO 4099:1984 BS 770-9:1985, ISO 4099:1984. Methods for chemical analysis of cheese. Determination of nitrate and nitrite contents. Cadmium reduction and photometry method
BS CECC 00012:1985 BS CECC 00012:1985. Harmonized system of quality assessment for electronic components: basic specification: radiographic inspection of electronic components
BS CECC 00013:1985 BS CECC 00013:1985. Harmonized system of quality assessment for electronic components: basic specification: scanning electron microscope inspection of semiconductor dice
BS 9751:1979 BS 9751:1979. Blank detail specification for fixed insulated (unshielded) r.f. inductors at the full assessment level
BS 9152:1978 BS 9152:1978. Rules for the preparation of detail specifications for reed relays of assessed quality
BS 9153:1982 BS 9153:1982. Rules for the preparation of detail specifications for all-or-nothing electromechanical relays of assessed quality primarily intended for telecommunication applications. Ful
BS 9200:1972 BS 9200:1972. Specification for reed contact units of assessed quality: generic data and methods of test
BS 9562:1982 BS 9562:1982. Specification for microswitches (sensitive switches) of assessed quality: generic data and methods of test: general rules for the preparation of detail specifications. Basic
BS 9563 N0032:1980 BS 9563 N0032:1980. Detail specification for rotary wafer switch (manual). 30 mm central hole mounting, spindle and panel sealed or non-sealed, solder terminations. Full assessment
BS 9564:1980 BS 9564:1980. Specification for push-button switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications
BS 9566:1984 BS 9566:1984. Rules for the preparation of detail specifications for printed board programming switches
BS CECC 16100:1980 BS CECC 16100:1980. Harmonized system of quality assessment for electronic components. Sectional specification: electromechanical all-or-nothing relays
BS CECC 16101:1980 BS CECC 16101:1980. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Electromechanical all-or-nothing relays. Test sc
BS CECC 18000:1984 BS CECC 18000:1984. Harmonized system of quality assessment for electronic components: generic specification: dry reed change-over contact units mechanically biased
BS CECC 19000:1979 BS CECC 19000:1979. Harmonized system of quality assessment for electronic components: generic specification: dry reed make contact units
BS 3567:1985 BS 3567:1985. Code of practice for preparation of flowsheets for the design of coal preparation plant
BS 5576:1985 BS 5576:1985. Specification for safety features of camping tents, awnings, trailer tents and caravan awnings
BS 5617:1985 BS 5617:1985. Specification for urea-formaldehyde (UF) foam systems suitable for thermal insulation of cavity walls with masonry or concrete inner and outer leaves
BS 5618:1985 BS 5618:1985. Code of practice for thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with urea-formaldehyde (UF) foam systems
BS 6474:Part 2:1985, ISO 5428-1984 BS 6474:Part 2:1985, ISO 5428-1984. Coded character sets for bibliographic information interchange. Specification for Greek alphabet coded character set
BS 8208-1:1985 BS 8208-1:1985. Guide to assessment of suitability of external cavity walls for filling with thermal insulants. Existing traditional cavity construction
BS 3620:1963 BS 3620:1963. Methods for the expression and presentation of results of coal cleaning tests
BS 3951-1.2:1985, ISO 1161-1984 BS 3951-1.2:1985, ISO 1161-1984. Freight containers. General. Specification for corner fittings for series 1 freight containers
BS 3958-3:1985 BS 3958-3:1985. Thermal insulating materials. Metal mesh faced man-made mineral fibre mattresses
BS 6462:1985 BS 6462:1985. Specification for mechanical performance of peg-type casement stays and face-fixed wedge-action fasteners
BS 6634:1985, ISO 6954-1984 BS 6634:1985, ISO 6954-1984. Guide for overall evaluation of vibration in merchant ships
BS 6637:1985, ISO 445-1984 BS 6637:1985, ISO 445-1984. Glossary of terminology for pallets for materials handling
BS 8207:1985 BS 8207:1985. Code of practice for energy efficiency in buildings
BS 6624:1985 BS 6624:1985. Specification for personal weighing machines for domestic use
BS 6628:1985, IEC 60806:1984 BS 6628:1985, IEC 60806:1984. Method for determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis
BS 6635:1985 BS 6635:1985. Specification for saddle trees made from wood
DD 116:1985 DD 116:1985. Open Systems Interconnection: transport protocol specification (ISO/DIS 8073 and DAD 1)
PP 7314:1985 PP 7314:1985. Projection systems compared
PP 7309:1985 PP 7309:1985. An introduction to the tolerancing of functional length dimensions
BS CECC 17001:1984 BS CECC 17001:1984. Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Mercury wetted make contact units for general ap
BS 9600:1983 BS 9600:1983. Specification for piezoelectric crystal filters of assessed quality: generic data and methods of test
BS 9612 N004:1977 BS 9612 N004:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, 47 U/2, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequ
BS 9612 N005:1977 BS 9612 N005:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ran
BS 9612 N006:1977 BS 9612 N006:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, 47 U/2, DQ and DP enclosures, 17 to 75 MHz frequency range. Third o
BS 9612 N009:1977 BS 9612 N009:1977. Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone
BS 9612 N010:1979 BS 9612 N010:1979. Detail specification for cold welded seal quartz crystal units for oscillator applications. DK enclosure, 6.0 to 25 MHz frequency range. Fundamental thickness-shea
BS 9612 N016:1979 BS 9612 N016:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz fre
BS 9612 N017:1979 BS 9612 N017:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz fre
BS 9612 N018:1979 BS 9612 N018:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range. Third
BS 9612 N019:1979 BS 9612 N019:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range. Third
BS 9612 N020:1979 BS 9612 N020:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range. Fift
BS 9612 N021:1979 BS 9612 N021:1979. Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range. Fift
BS 9617:1982 BS 9617:1982. Rules for the preparation of detail specifications for quartz crystal units of assessed quality. Full assessment level
BS 9625:1983 BS 9625:1983. Blank detail specification for quartz crystal oscillators of assessed quality: full assessment level
BS 9925-0:1984, IEC 60723-1:1982,QC 250000:1982 BS 9925-0:1984, IEC 60723-1:1982,QC 250000:1982. Harmonized system of quality assessment for electronic components. Inductor and transformer cores for t
BS 9925-01.0:1984, IEC 60723-2:1983,QC 250100:1983 BS 9925-01.0:1984, IEC 60723-2:1983,QC 250100:1983. Harmonized system of quality assessment for electronic components. Inductor and transformer cores
BS 9925-01.01:1984, IEC 60723-2-1:1983,QC 250101:1983 BS 9925-01.01:1984, IEC 60723-2-1:1983,QC 250101:1983. Harmonized system of quality assessment for electronic components. Inductor and transformer
BS EN 125100:1993, CECC 25100:1976 BS EN 125100:1993, CECC 25100:1976. Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for inductor app
BS EN 125200:1993, CECC 25200:1977 BS EN 125200:1993, CECC 25200:1977. Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for linear trans
BS CECC 25300:1981 BS CECC 25300:1981. Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for power applications
BS EN 125400:1993, CECC 25400:1982 BS EN 125400:1993, CECC 25400:1982. Harmonized system of quality assessment for electronic components: sectional specification: adjusters used with magnetic oxide co
BS 21:1985 BS 21:1985. Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions)
BS 1597:1985 BS 1597:1985. Specification for limits and methods of measurement of electromagnetic interference generated by marine equipment and installations
BS 1902-5.9:1985 BS 1902-5.9:1985. Methods of testing refractory materials. Refractory and thermal properties. Determination of permanent change in dimensions on heating of shaped insulating products
BS 4570:1985 BS 4570:1985. Specification for fusion welding of steel castings
BS 4664:1985 BS 4664:1985. Methods for sampling and cutting specimens of textile floor coverings for physical tests
BS 4727-2:Group 06:1985 BS 4727-2:Group 06:1985. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Switchgear and c
BS 4727-1:Group 05:1985 BS 4727-1:Group 05:1985. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electroni
BS 9561:1979 BS 9561:1979. Specification for lever operated switches of assessed quality: generic data and methods of test; general rules for the preparation of detail specifications
BS 9130:1972 BS 9130:1972. Specification for potentiometers of assessed quality: generic data and methods of test
BS 9131:1973 BS 9131:1973. Rules for the preparation of detail specifications for lead-screw actuated preset potentiometers of assessed quality
BS 9131 N001 to 016:1974 BS 9131 N001 to 016:1974. Detail specification for lead-screw actuated wirewound or non-wirewound preset potentiometers. Rectangular and square forms, container sealed, actuat
BS 9133:1973 BS 9133:1973. Rules for the preparation of detail specifications for single turn low power rotary potentiometers of assessed quality
BS 9133 N001 to 003:1975 BS 9133 N001 to 003:1975. Detail specification for single turn low power non-wirewound rotary potentiometers. Spindle insulated from resistance element, spindle and panel seal
BS 9133 N004 to 010:1975 BS 9133 N004 to 010:1975. Detail specification for single turn low power wirewound rotary potentiometers. Spindle insulated from resistance element, spindle and panel sealed o
BS 9940-01.0:1983, IEC 60115-2:1982,QC 400100:1982 BS 9940-01.0:1983, IEC 60115-2:1982,QC 400100:1982. Harmonized system of quality assessment for electronic components. Fixed resistors for use in ele
BS 9940-01.01:1983, IEC 60115-2-1:1982,QC 400101:1982 BS 9940-01.01:1983, IEC 60115-2-1:1982,QC 400101:1982. Harmonized system of quality assessment for electronic components. Fixed resistors for use
BS QC 400200:1993, IEC 60115-4:1982,QC 400200:1982 BS QC 400200:1993, IEC 60115-4:1982,QC 400200:1982. Harmonized system of quality assessment for electronic components. Fixed resistors for use in ele
BSQC 400201:1993, IEC 60115-4-1:1983,QC 400201 BSQC 400201:1993, IEC 60115-4-1:1983,QC 400201. Specification for harmonized system of quality assessment for electronic components. Fixed resistors for
BS 9940-03.0:1983, IEC 60115-5:1982,QC 400300:1982 BS 9940-03.0:1983, IEC 60115-5:1982,QC 400300:1982. Harmonized system of quality assessment for electronic components. Fixed resistors for use in ele
BS 9940-03.01:1984, IEC 60115-5-1:1983,QC 400301 BS 9940-03.01:1984, IEC 60115-5-1:1983,QC 400301. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electro
BS 9940-04.0:1984, IEC 60115-6:1983,QC 400400:1983 BS 9940-04.0:1984, IEC 60115-6:1983,QC 400400:1983. Harmonized system of quality assessment for electronic components. Fixed resistors for use in ele
BS 9940-04.01:1984, IEC 60115-6-1:1983,QC 400401 BS 9940-04.01:1984, IEC 60115-6-1:1983,QC 400401. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electro
BS 9940-04.02:1984, IEC 60115-6-2:1983,QC 400402 BS 9940-04.02:1984, IEC 60115-6-2:1983,QC 400402. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electro
BS CECC 40000:1980 BS CECC 40000:1980. Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors
BS CECC 40100:1981 BS CECC 40100:1981. Harmonized system of quality assessment for electronic components: sectional specification: fixed low power non-wirewound resistors
BS CECC 40101 019:1977 BS CECC 40101 019:1977. Detail specification for fixed low power non-wirewound insulated resistors. Metal oxide film, helically cut. Full assessment level
BS CECC 40102:1981 BS CECC 40102:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed low power non-wirewound resistors. Assessm
BS CECC 40200:1981 BS CECC 40200:1981. Harmonized system of quality assessment for electronic components: sectional specification: fixed power resistors
BS CECC 40201:1981 BS CECC 40201:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed power resistors. Assessment level S
BS CECC 40202:1981 BS CECC 40202:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed power resistors. Assessment level M
BS CECC 40203:1981 BS CECC 40203:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed power resistors. Assessment level H
BS CECC 40300:1981 BS CECC 40300:1981. Harmonized system of quality assessment for electronic components: sectional specification: fixed precision resistors
BS CECC 41000:1977 BS CECC 41000:1977. Harmonized system of quality assessment for electronic components: generic specification for potentiometers
BS CECC 41100:1978 BS CECC 41100:1978. Harmonized system of quality assessment for electronic components: sectional specification: lead screw actuated and rotary preset potentiometers
BS CECC 41101:1978 BS CECC 41101:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: preset potentiometers (assessment level S)
BS CECC 41101-007:1985 BS CECC 41101-007:1985. Harmonized blank detail specification for lead screw actuated non-wirewound preset potentiometers. Square form, container sealed, actuating device insula
BS CECC 41102:1978 BS CECC 41102:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: preset potentiometers (assessment level M)
BS CECC 41200:1979 BS CECC 41200:1979. Harmonized system of quality assurance for electronic components: sectional specification: power potentiometers
BS CECC 41201:1978 BS CECC 41201:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: power potentiometers (assessment level S)
BS CECC 41202:1978 BS CECC 41202:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: power potentiometers (assessment level M)
BS CECC 41300:1979 BS CECC 41300:1979. Harmonized system of quality assessment for electronic components. Sectional specification: low power single-turn rotary potentiometers
BS CECC 41301:1979 BS CECC 41301:1979. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: low power single turn rotary potentiometers (ass
BS CECC 41302:1979 BS CECC 41302:1979. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: low power single turn rotary potentiometers (ass
BS CECC 41401:1979 BS CECC 41401:1979. Specification for harmonized system of quality assessment for electronic conponents. Blank detail specification: rotary precision potentiometers (assessment leve
BS CECC 42000:1978 BS CECC 42000:1978. Harmonized system of quality assessment for electronic components: generic specification: varistors
BS CECC 42100:1978 BS CECC 42100:1978. Harmonized system of quality assessment for electronic components: sectional specification: low voltage varistors primarily for telephony applications
BS CECC 42101:1978 BS CECC 42101:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: low voltage varistors primarily for telephony ap
BS 4875-1:1985 BS 4875-1:1985. Strength and stability of furniture. Methods for determination of strength of chairs and stools
BS 4875:Part 2:1985 BS 4875:Part 2:1985. Strength and stability of furniture. Methods for determination of stability of chairs and stools
BS 4875-3:1985 BS 4875-3:1985. Strength and stability of furniture. Methods for determination of strength of settees
BS 4875:Part 4:1985 BS 4875:Part 4:1985. Strength and stability of furniture. Methods for determination of stability of settees
BS 4875-5:1985 BS 4875-5:1985. Strength and stability of furniture. Methods for determination of strength of tables and trolleys
BS 4875-6:1985 BS 4875-6:1985. Strength and stability of furniture. Methods for determination of stability of tables and trolleys
BS 4875:Part 7:1985 BS 4875:Part 7:1985. Strength and stability of furniture. Methods for determination of strength of storage furniture
BS 4875:Part 8:1985 BS 4875:Part 8:1985. Strength and stability of furniture. Methods for determination of stability of storage furniture
BS 5131-4.20:1985 BS 5131-4.20:1985. Methods of test for footwear and footwear materials. Other components. Force required to pull heel pins out of shoe heels
BS EN 26801:1993, ISO 6801-1983 BS EN 26801:1993, ISO 6801-1983. Rubber or plastics hoses. Determination of volumetric expansion
BS EN 21746:1993, ISO 1746-1983 BS EN 21746:1993, ISO 1746-1983. Rubber or plastics hoses and tubing. Bending tests
BS 5793-3.2:1985, IEC 60534-3-2:1984 BS 5793-3.2:1985, IEC 60534-3-2:1984. Industrial-process control valves. Dimensions. Specification for face-to-face dimensions for flangeless control valves except
BS 5834-1:1985 BS 5834-1:1985. Surface boxes, guards and underground chambers for gas and waterworks purposes. Specification for guards, including foundation units
BS 5873-3:1985 BS 5873-3:1985. Educational furniture. Specification for strength and stability of tables for educational institutions
BS 6133:1985 BS 6133:1985. Code of practice for safe operation of lead-acid stationary cells and batteries
BS 6467-1:1985 BS 6467-1:1985. Electrical apparatus with protection by enclosure for use in the presence of combustible dusts. Specification for apparatus
BS 6642:1985 BS 6642:1985. Specification for disposable plastics refuse sacks made from polyethylene
BS 8110:Part 1:1985 BS 8110:Part 1:1985. Structural use of concrete. Code of practice for design and construction
BS 8206-1:1985 BS 8206-1:1985. Lighting for buildings. Code of practice for artificial lighting
BS 9721:1985 BS 9721:1985. Sectional specification for signal transformers of assessed quality for use in electronic equipment for capability approval
BS 6723:1985, ISO 5964-1985 BS 6723:1985, ISO 5964-1985. Guide to establishment and development of multilingual thesauri
BS 1387:1985 BS 1387:1985. Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads
BS 6617-1:1985 BS 6617-1:1985. Determination of decarburization in steel. Methods for determining decarburization by microscopic and micro-hardness techniques
BS 6647:1985, IEC 60790:1984 BS 6647:1985, IEC 60790:1984. Guide to oscilloscopes and peak voltmeters for impulse tests
BS 3221-1:1985 BS 3221-1:1985. Medicine measures. Specification for medicine measures of 50 ml total graduated capacity
BS 3158:1985 BS 3158:1985. Specification for rubber hoses and hose assemblies for aircraft ground fuelling and defuelling
BS 4828:1985, IEC 60270:1981 BS 4828:1985, IEC 60270:1981. Guide for partial discharge measurements
BS 6328-1:1985 BS 6328-1:1985. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to speechband circuits
BS 6328-2:1985 BS 6328-2:1985. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to baseband circuits
BS 6328-4:1985 BS 6328-4:1985. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to telegraph circuits using SC
BS 3N 100:1985 BS 3N 100:1985. Specification for general design requirements for aircraft oxygen systems and equipment
BS 9070:Sections 1 and 2:1969 BS 9070:Sections 1 and 2:1969. Specification for fixed capacitors of assessed quality: generic data and methods of test. Principles and mandatory procedures. General rule
BS 9070-4:1971 BS 9070-4:1971. Specification for fixed capacitors of assessed quality: generic data and methods of test. Polystyrene dielectric capacitors
BS 9070-5:1971 BS 9070-5:1971. Specification for fixed capacitors of assessed quality: generic data and methods of test. Ceramic dielectric capacitors
BS 9070-6:1971 BS 9070-6:1971. Specification for fixed capacitors of assessed quality: generic data and methods of test. Polycarbonate dielectric capacitors and polyethylene terephthalate dielectric c
BS 9070-7:1971 BS 9070-7:1971. Specification for fixed capacitors of assessed quality: generic data and methods of test. Mica dielectric capacitors
BS 9070 N002:1971 BS 9070 N002:1971. Detail specification for fixed metallized mica dielectric capacitors (style C2AED). Rectangular non-metallic case, centred wires on one face. General application c
BS 9070 N003:1971 BS 9070 N003:1971. Detail specification for fixed metallized mica dielectric capacitors (style C2AEA). Rectangular non-metallic case, axial wires at both ends. General application ca
BS 9073 N0034:1978 BS 9073 N0034:1978. Detail specification for fixed tantalum electrolytic capacitors. Porous anode, polar non-solid electrolyte. Tubular insulated metallic case, PTFE/elastomer seal,
BS 9074 N002:1974 BS 9074 N002:1974. Detail specification for fixed polystyrene foil dielectric capacitors. Tubular insulated case, axial terminations. Full asessment level
BS 9074 N007:1981 BS 9074 N007:1981. Detail specification for polystyrene film dielectric capacitors, extended foil. Rectangular non-metallic case, unidirectional terminations. Full plus additional as
BS 9075 N001:1981 BS 9075 N001:1981. Detail specification for fixed ceramic dielectric capacitors (type 1 and type 2). Rectangular monolithic chip. Full assessment level
BS 9075 N023:1978 BS 9075 N023:1978. Detail specification for fixed monolithic ceramic dielectric capacitors (type 1B). Rectangular non-metallic case, centred wires on one face. Full assessment level
BS 9075 N024:1978 BS 9075 N024:1978. Detail specification for fixed monolithic ceramic dielectric capacitors (type 2C1). Rectangular non-metallic case, centred wires on one face. Full assessment level
BS 9075 N025:1978 BS 9075 N025:1978. Detail specification for fixed monolithic ceramic dielectric capacitors (type 2F4). Rectangular non-metallic case, centred wires on one face. Full assessment level
BS 9076 N001 to 004:1974 BS 9076 N001 to 004:1974. Detail specification for fixed metallized polyethylene terephthalate (PETP) film or metallized polycarbonate film dielectric capacitors. Rectangular
BS 9100:1983 BS 9100:1983. Specification for capability approval for custom-built capacitors and capacitor modules: generic data and methods of test
BS QC 300201:1985, IEC 60384-15-3:1984,QC 300201 BS QC 300201:1985, IEC 60384-15-3:1984,QC 300201. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors
BS QC 300202:1985, IEC 60384-15-2:1984,QC 300202 BS QC 300202:1985, IEC 60384-15-2:1984,QC 300202. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors
BS QC 300203:1985, IEC 60384-15-1,QC 300203 BS QC 300203:1985, IEC 60384-15-1,QC 300203. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use i
BS CECC 30201 001:1981 BS CECC 30201 001:1981. Harmonized detail specification for fixed tantalum capacitors. Porous anode, solid electrolyte. Cylindrical insulated/non-insulated metallic case, polar/
BS CECC 30301 024:1981 BS CECC 30301 024:1981. Harmonized detail specification for fixed aluminium electrolytic capacitors (long-life grade). Non-solid electrolyte. Cylindrical, polar insulated metall
BS CECC 30302:1978 BS CECC 30302:1978. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: aluminium electrolytic capacitors with solid ele
BS CECC 30400:1984 BS CECC 30400:1984. Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polyethylene-terephthalate film dielectric capacitor
BS CECC 30401:1985 BS CECC 30401:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polyethylene terephthalate film
BS CECC 30401 023:1979 BS CECC 30401 023:1979. Harmonized detail specification for fixed metallized polyethylene terephthalate film dielectric d.c. capacitors. Rectangular insulated non-metallic case,
BS CECC 30401 033:1981 BS CECC 30401 033:1981. Harmonized detail specification for fixed metallized polyethylene terephthalate film dielectric d.c. capacitors (long-life grade). Rectangular insulated
BS CECC 30600:1979 BS CECC 30600:1979. Harmonized system of quality assessment for electronic components: sectional specification: fixed ceramic capacitors, type 1
BS CECC 30601:1980 BS CECC 30601:1980. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed ceramic dielectric capacitors, class 1
BS CECC 31100:1981 BS CECC 31100:1981. Harmonized system of quality assessment for electronic components: sectional specification: fixed ceramic dielectric capacitors of barrier layer type (dielectric
BS CECC 31101:1981 BS CECC 31101:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed ceramic dielectric capacitors of barrier l
BS CECC 31200:1981 BS CECC 31200:1981. Harmonized system of quality assessment for electronic components: sectional specification: fixed capacitors with metallized electrodes and polypropylene dielect
BS CECC 31201:1981 BS CECC 31201:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors with metallized electrodes and
BS CECC 31300:1983 BS CECC 31300:1983. Harmonized system of quality assessment for electronic components: sectional specification: fixed mica dielectric d.c. capacitors
BS CECC 31301:1983 BS CECC 31301:1983. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed mica dielectric d.c. capacitors
BS CECC 31400:1982 BS CECC 31400:1982. Harmonized system of quality assessment for electronic components: sectional specification: fixed ceramic capacitors of dielectric class 1, for electrical shock
BS CECC 31500:1982 BS CECC 31500:1982. Harmonized system of quality assessment of electronic components. Sectional specification: fixed ceramic capacitors of dielectric class 2, for electrical shock h
BS 684:Part 1:Section 1.1:1985 BS 684:Part 1:Section 1.1:1985. Methods of analysis of fats and fatty oils. Physical methods. Determination of litre weight in air
BS 1000[33]:1985 BS 1000[33]:1985. Universal Decimal Classification. English full edition. Economics
BS 3591:1985 BS 3591:1985. Specification for industrial methylated spirits
BS 4727-5:Group 01:1985 BS 4727-5:Group 01:1985. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to electromedical equipment. Radiology
BS 4736:1985, ISO 7771-1985 BS 4736:1985, ISO 7771-1985. Method for determination of dimensional changes of fabrics induced by cold-water immersion
BS 5834-3:1985 BS 5834-3:1985. Surface boxes, guards and underground chambers for gas and waterworks purposes. Specification for large surface boxes
BS 6458-2.3:1985, IEC 60695-2-3:1984 BS 6458-2.3:1985, IEC 60695-2-3:1984. Fire hazard testing for electrotechnical products. Test methods. Bad-connection test with heaters
BS 6641:1985, IEC 60788:1984 BS 6641:1985, IEC 60788:1984. Glossary of medical radiology terms
BS 6653:1985, IEC 60776:1983 BS 6653:1985, IEC 60776:1983. Method for expression of the properties of logic analyzers
BS 6683:1985 BS 6683:1985. Guide to installation and use of valves
BS AU 163a:1985, ISO 3583-1984 BS AU 163a:1985, ISO 3583-1984. Specification for pressure test connection for compressed-air pneumatic braking equipment for road vehicles
BS CECC 18001:1984 BS CECC 18001:1984. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: dry reed change-over contact units, mechanically
BS 9210 N001-1:1975 BS 9210 N001-1:1975. Detail specification for radio frequency connectors (type BNC). Sealed, soldered, captive contact, 50 ohms. Full assessment level
BS 9210 N0001:Part 2:1982 BS 9210 N0001:Part 2:1982. Detail specification for radio frequency connectors (type BNC). Sealed, soldered, captive contact, 50 ohms. Control drawings. Mating face details a
BS 9210 N0003:1976 BS 9210 N0003:1976. Detail specification for radio frequency connectors (type BNC). Unsealed, soldered, captive contact, 50 ohms. Full assessment level
BS 9210 N0004:1981 BS 9210 N0004:1981. Detail specification for radio frequency coaxial connectors (series BNC). Unsealed, soldered, captive contact, 50 ohms. Basic assessment level
BS 9210 N007-1:1976 BS 9210 N007-1:1976. Detail specification for radio frequency connectors (type SMB). Unsealed, soldered, captive contact, 50 Ω, snap-on couplings. Full assessment level
BS 9210 N007-2:1976 BS 9210 N007-2:1976. Detail specification for radio frequency connectors (type SMB). Unsealed, soldered, captive contact, 50 ohms, snap-on couplings. Control drawings. Mating face
BS 9210 N0009-1:1978 BS 9210 N0009-1:1978. Detail specification for radio frequency connectors (series SMC). Unsealed, soldered, captive contact, 50 Ω, screw coupling. Full assessment level
BS 9210 N0009-2:1978 BS 9210 N0009-2:1978. Detail specification for radio frequency connectors (series SMC). Unsealed, soldered, captive contact, 50 ohms, screw coupling. Control drawings. Mating face
BS 9520:1983 BS 9520:1983. Specification for electrical connectors of assessed quality for d.c. and low frequency application: generic data, methods of test and capability approval procedures
BS 9521:1983 BS 9521:1983. Specification for removable contacts of assessed quality for electrical connectors as defined by BS 9520: generic data, methods of test and rules for the preparation of deta
BS 9522 N0001:1982 BS 9522 N0001:1982. Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications. Bayonet coupling with front release, rear removabl
BS 9523:1984 BS 9523:1984. Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with integral metal housings for d.c. and low frequency applicat
BS 9524:1984 BS 9524:1984. Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with moulded bodies for d.c. and low frequency applications. Ful
BS 9525:1984 BS 9525:1984. Rules for the preparation of detail specifications for two-part printed board electrical connectors and board-mounted transition devices of assessed quality for d.c. and l.f
BS 9940-05.01:1985, IEC 60115-7-1:1984,QC 400501:1984 BS 9940-05.01:1985, IEC 60115-7-1:1984,QC 400501:1984. Harmonized system of quality assessment for electronic components. Fixed resistors for use
BS 9526 N0001:1978 BS 9526 N0001:1978. Detail specification for multi-contact edge socket electrical connectors. Single or double sided, closed ended, replaceable contacts, through-board solder or wir
BS 9526 N0002:1979 BS 9526 N0002:1979. Detail specification for multi-contact edge socket electrical connectors. Single or double sided, open ended, metal fixing flanges, guide key location, replaceab
BS 9526 N0003:1979 BS 9526 N0003:1979. Detail specification for multi-contact edge socket electrical connectors. Single or double sided, open ended, guide key location, replaceable contacts, through-b
BS CECC 22110:1983 BS CECC 22110:1983. Harmonized system of quality assessment for electronic components: sectional specification: radio frequency coaxial connectors, series SMA
BS CECC 22111:1983 BS CECC 22111:1983. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency coaxial connections, series SMA
BS CECC 22121:1981 BS CECC 22121:1981. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: radio frequency coaxial connectors, series BNC
BS 9760:1977 BS 9760:1977. Specification for printed circuits of assessed quality: generic data and methods of test: capability approval procedure and rules
BS 9766:1983 BS 9766:1983. Specification for printed circuits of assessed quality: sectional specification for multilayer flexi-rigid printed circuits with through hole connections
BS CECC 75100:1984 BS CECC 75100:1984. Harmonized system of quality assessment for electronic components. Sectional specification: two-part and edge socket connectors for printed board application
BS CECC 75101:1984 BS CECC 75101:1984. Specification for harmonized system of quality assessment for electronic components. Example detail specification/blank detail specification. Two-part and edge s
BS 9430:1978 BS 9430:1978. Rules for the preparation of detail specifications for integrated circuits of assessed quality: voltage regulators. Full assessment level
BS 9450:1975 BS 9450:1975. Specification for integrated electronic circuits and micro-assemblies of assessed quality (capability approval procedures): generic data and methods of test
BS 9460:1974 BS 9460:1974. Rules for the preparation of detail specifications for integrated circuits of assessed quality: differential operational amplifiers. General application category
BS 9490:1975 BS 9490:1975. Rules for the preparation of detail specifications for digital integrated circuits of assessed quality. Full assessment level
BS 9491:1975 BS 9491:1975. Rules for the preparation of detail specifications for analogue integrated circuits of assessed quality. Full assessment level
BS 9492:1978 BS 9492:1978. Rules for the preparation of detail specifications for capacitively coupled digital integrated circuits of assessed quality. Full assessment level
BS 9493:1981 BS 9493:1981. Rules for the preparation of detail specifications for integrated circuits of assessed quality which perform mixed digital and/or analogue functions
BS CECC 63100:1985 BS CECC 63100:1985. Harmonized system of quality assessment for electronic components: sectional specification: film and hybrid integrated circuits
BS CECC 63101:1985 BS CECC 63101:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: film and hybrid integrated circuits
BS CECC 63200:1985 BS CECC 63200:1985. Harmonized system of quality assessment for electronic components: sectional specification: film and hybrid integrated circuits (capability approval)
BS CECC 63201:1985 BS CECC 63201:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: film and hybrid integrated circuits (capability
BS CECC 90000:1985 BS CECC 90000:1985. Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
BS CECC 90101:1980 BS CECC 90101:1980. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL circuits, series 54, 64, 74, 84
BS EN 190102:1994 BS EN 190102:1994. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL-SCHOTTKY circuits, series 54S, 64
BS CECC 90104:1981 BS CECC 90104:1981. Specification for harmonized system of quality assessment for electronic components. Family specification: C. Mos digital integrated circuits, series 4000B and 4
BS CECC 90201:1984 BS CECC 90201:1984. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated voltage regulators
BS CECC 90203:1985 BS CECC 90203:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated analogue switching circuits
BS CECC 90301:1985 BS CECC 90301:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated line transmitters and receivers
BS 541:1985 BS 541:1985. Method for determination of the Rideal-Walker coefficient of disinfectants
BS 3683-2:1985 BS 3683-2:1985. Glossary of terms used in non-destructive testing. Magnetic particle flaw detection
BS 5237:1985 BS 5237:1985. Specification for lifting twistlocks
BS 6559:1989, HD 1/160 BS 6559:1989, HD 1/160. Guide. General introductory document on European (or CEN) methods of test for wood preservatives
BS AU 50:Part 3:Section 1a:1985 BS AU 50:Part 3:Section 1a:1985. Tyres and wheels. Valves. Specification for valve dimensions
BS 5817-14:1985 BS 5817-14:1985. Specification for audiovisual, video and television equipment and systems. Specification for audio striped card system
BS 6340-3:1985 BS 6340-3:1985. Shower units. Specification for prefabricated shower enclosures and shower cabinets
BS 5817:Part 15:1985, IEC 60574-15:1984 BS 5817:Part 15:1985, IEC 60574-15:1984. Specification for audiovisual, video and television equipment and systems. Specification for audio pages
BS EN 143000:1992 BS EN 143000:1992. Harmonized system of quality assessment for electronic components: generic specification: directly heated negative temperature coefficient thermistors
BS EN 143001:1992 BS EN 143001:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: directly heated negative temperature coefficient t
BS EN 143002:1992 BS EN 143002:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: directly heated negative temperature coefficient t
BS EN 143003:1992 BS EN 143003:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: directly heated negative temperature coefficient t
BS EN 143004:1992 BS EN 143004:1992. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: directly heated negative temperature coefficient t
BS 9025:1970 BS 9025:1970. Specification for travelling-wave amplifier tubes of assessed quality: generic data and methods of test
BS 9031:1971 BS 9031:1971. Rules for the preparation of detail specifications for pulsed fixed-frequency magnetrons of assessed quality
BS 9032:1975 BS 9032:1975. Rules for the preparation of detail specifications for pulsed magnetrons (excluding frequency-agile magnetrons) of assessed quality. Basic assessment level
BS 9040:1978 BS 9040:1978. Specification for gas-filled microwave switching tubes of assessed quality: generic data and methods of test
BS 9041:1978 BS 9041:1978. Rules for the preparation of detail specifications for gas filled microwave switching tubes of assessed quality: tunable and broadband TR tubes and TR limiters. Full assessm
BS 9047:1978 BS 9047:1978. Specification for glow modulator tubes of assessed quality: generic data and methods of test
BS 9048:1978 BS 9048:1978. Rules for the preparation of detail specifications for glow modulator tubes of assessed quality
BS 9050:1971 BS 9050:1971. Specification for cathode ray tubes of assessed quality: generic data and methods of test
BS 9054:1971 BS 9054:1971. Rules for the preparation of detail specifications for radar display cathode ray tubes of assessed quality
BS 9062:1983 BS 9062:1983. Specification for microwave passive components of assessed quality: generic data and methods of test
BS 9064:1983 BS 9064:1983. Sectional specification for circulators or isolators of assessed quality for capability approval
BS EN 111000:1993 BS EN 111000:1993. Harmonized system of quality assessment for electronic components. Generic specification: cathode ray tubes
BS EN 111100:1992 BS EN 111100:1992. Harmonized system of quality assessment for electronic components: sectional specification: display storage tubes
BS EN 113000:1993, CECC 13000:1980 BS EN 113000:1993, CECC 13000:1980. Harmonized system of quality assessment for electronic components. Generic specification: camera tubes
BS EN 114000:1993, CECC 14000:1984 BS EN 114000:1993, CECC 14000:1984. Harmonized system of quality assessment for electronic components: generic specification: photomultiplier tubes
BS EN 135000:1993, CECC 35000:1977 BS EN 135000:1993, CECC 35000:1977. Harmonized system of quality assessment for electronic components. Generic specification: travelling wave amplifier tubes
BS EN 136000:1993, CECC 36000:1977 BS EN 136000:1993, CECC 36000:1977. Harmonized system of quality assessment for electronic components: generic specification: magnetrons
BS CECC 45000:1977 BS CECC 45000:1977. Specification for harmonized system of quality assessment for electronic components: generic specification: space-charge controlled tubes
BS E9063:1976, CECC 45002:1975 BS E9063:1976, CECC 45002:1975. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: industrial heating triod
BS E9065:1976, CECC 45003:1975 BS E9065:1976, CECC 45003:1975. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: small power transmitting
BS CECC 45004:1977 BS CECC 45004:1977. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: disc seal power tubes
BS CECC 46000:1978 BS CECC 46000:1978. Harmonized system of quality assessment for electronic components: generic specification: cold cathode indicator tubes
BS CECC 46001:1977 BS CECC 46001:1977. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: cold cathode indicator tubes
BS 308-2:1985 BS 308-2:1985. Engineering drawing practice. Recommendations for dimensioning and tolerancing of size
BS 4742-3:1985, ISO 5670-1984 BS 4742-3:1985, ISO 5670-1984. Hydraulic equipment for agricultural machinery. Specification for dimensions and pressure rating of single-acting telescopic tipping cylind
BS 4742-4:1985, ISO 5676-1983 BS 4742-4:1985, ISO 5676-1983. Hydraulic equipment for agricultural machinery. Specification for hydraulic couplings on braking systems for trailers and trailed equipment
BS 4742-5:1985, ISO 5669-1982 BS 4742-5:1985, ISO 5669-1982. Hydraulic equipment for agricultural machinery. Specification for dimensions of braking cylinders for trailers and trailed equipment
BS 6161-11:1985 BS 6161-11:1985. Methods of test for anodic oxidation coatings on aluminium and its alloys. Measurement of total reflectance using a photoelectric reflectometer
BS 6626:1985 BS 6626:1985. Code of practice for maintenance of electrical switchgear and controlgear for voltages above l kV and up to and including 36 kV
BS 6645:1985 BS 6645:1985. Method for determination of alkali solubility of flax materials
BS 6646:1985 BS 6646:1985. Method for determination of ash of textiles
BS MA 2-8:1985 BS MA 2-8:1985. Magnetic compasses and binnacles. Specification for transmitting systems and off-course alarms for class A magnetic compasses
BS A 295:1985, ISO 7481-1984 BS A 295:1985, ISO 7481-1984. Methods of test for self-locking nuts with maximum operating temperature less than or equal to 425°C
BS 507:1985 BS 507:1985. Specification for ethanol for industrial use
BS 3921:1985 BS 3921:1985. Specification for clay bricks
BS 5156:1985 BS 5156:1985. Specification for diaphragm valves
BS 5415-1:1985 BS 5415-1:1985. Safety of electrical motor-operated industrial and commercial cleaning appliances. Specification for general requirements
BS 6057:Part 3:Section 3.5:1985, ISO 127-1984 BS 6057:Part 3:Section 3.5:1985, ISO 127-1984. Rubber latices. Methods of test. Determination of KOH number of natural rubber latices
BS 6649:1985 BS 6649:1985. Specification for clay and calcium silicate modular bricks
BS MA 2-1:1985 BS MA 2-1:1985. Magnetic compasses and binnacles. Specification for class A magnetic compasses, their binnacles and azimuth reading devices (including test procedures)
BS 4G 173-1:1985, ISO 461-1:1985 BS 4G 173-1:1985, ISO 461-1:1985. Connectors for ground electrical supplies for aircraft. Specification for design, performance and test requirements
BS 4G 173-2:1985, ISO 461-2:1985 BS 4G 173-2:1985, ISO 461-2:1985. Connectors for ground electrical supplies for aircraft. Specification for dimensions
BS 1902-4.0:1985 BS 1902-4.0:1985. Methods of testing refractory materials. Properties measured under an applied stress. Introduction
BS 3056-1:1985 BS 3056-1:1985. Sizes of refractory bricks. Specification for multi-purpose bricks
BS 4483:1985 BS 4483:1985. Specification for steel fabric for the reinforcement of concrete
BS 5760:Part 1:1985 BS 5760:Part 1:1985. Reliability of systems, equipment and components. Guide to reliability and maintainability programme management
BS 3A 109:1985 BS 3A 109:1985. Specification for steel shear bolts (Unified hexagons and Unified threads)
BS 9300:1969 BS 9300:1969. Specification for semiconductor devices of assessed quality: generic data and methods of test
BS 9300 C199-276:1971 BS 9300 C199-276:1971. Detail specification for silicon voltage-regulator diodes
BS 9300 C377-378:1971 BS 9300 C377-378:1971. Detail specifications for silicon coaxial mixer diodes
BS 9300 C379-388:1971 BS 9300 C379-388:1971. Detail specifications for silicon stud mounted, power rectifier diodes
BS 9300 C405-429:1971 BS 9300 C405-429:1971. Detail specifications for silicon voltage-regulator diodes
BS 9300 C476:1973 BS 9300 C476:1973. Detail specification for silicon avalanche rectifier diode
BS 9300 C534:1971 BS 9300 C534:1971. Detail specification for silicon coaxial resistive switching diode
BS 9300 C582-584:1971 BS 9300 C582-584:1971. Detail specifications for reverse blocking triode thyristors
BS 9300 C599:1971 BS 9300 C599:1971. Detail specification for silicon microwave switching diode, rod mounted
BS 9300 C667-668:1971 BS 9300 C667-668:1971. Detail specification for silicon avalanche rectifier diodes
BS 9300 C678-721:1971 BS 9300 C678-721:1971. Detail specification for silicon voltage regulator diodes
BS 9300 C762:1971 BS 9300 C762:1971. Detail specification for mixer diodes for use at X-band frequencies
BS 9300 C771-772:1971 BS 9300 C771-772:1971. Detail specification for coaxial mixer diodes
BS 9300 C776-777:1971 BS 9300 C776-777:1971. Detail specification for germanium coaxial mixer diodes
BS 9300 C778:1971 BS 9300 C778:1971. Detail specification for a matched pair of germanium coaxial mixer diodes
BS 9300 C780-831:1971 BS 9300 C780-831:1971. Detail specification for silicon voltage regulator diodes
BS 9300 C841-849:1971 BS 9300 C841-849:1971. Detail specification for silicon voltage regulator diodes
BS 9301 N002:1971 BS 9301 N002:1971. Detail specification for general purpose silicon signal diodes. 150 mA, 150 V, hermetically sealed, glass encapsulation. General application category Q
BS 9305 N001:1972 BS 9305 N001:1972. Detail specification for silicon voltage regulator diodes. 1.5 W, 3.3 to 33 V (5%), hermetically sealed. General application category Q
BS 9305 N041:1972 BS 9305 N041:1972. Detail specification for silicon voltage regulator diodes. 400 mW, 2.7 to 33 V (5%), hermetically sealed, glass encapsulation. General application category Q
BS 9305 N042:1972 BS 9305 N042:1972. Detail specification for silicon voltage regulator diodes. 1.5 W, 6.8 to 200 V (5%), hermetically sealed. General application category C
BS 9305 N044:1974 BS 9305 N044:1974. Detail specification for silicon voltage regulator diodes. 1.0 W, 3.3 to 33 V (5%), hermetically sealed. Full assessment level
BS 9307:1975 BS 9307:1975. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: variable capacitance diodes for tuning applications
BS 9320:1971 BS 9320:1971. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave mixer diodes (c.w. operation)
BS 9321:1971 BS 9321:1971. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave mixer diodes (pulse operation)
BS 9322:1971 BS 9322:1971. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave detector diodes
BS 9323:1976 BS 9323:1976. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: p-i-n microwave passive limiter diodes
BS 9324:1976 BS 9324:1976. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: p-i-n microwave active switching diodes
BS 9325:1977 BS 9325:1977. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave Gunn oscillators (c.w. operation)
BS 9327:1977 BS 9327:1977. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave avalanche oscillators (c.w. operation)
BS 9328:1977 BS 9328:1977. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave avalanche oscillators (pulse operation)
BS 9329:1977 BS 9329:1977. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: varactor diodes for frequency multiplication
BS 9350:1976 BS 9350:1976. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: low noise, low power microwave transistors
BS 9351:1980 BS 9351:1980. Rules for the preparation of detail specifications for semiconductor devices of assessed quality: microwave semiconductor switches (without integrated driver circuits)
BS 9364 N007 and N009:1978 BS 9364 N007 and N009:1978. Detail specification for low power silicon n-p-n switching transistors. 20 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus
BS 9364 N008 and N010:1978 BS 9364 N008 and N010:1978. Detail specification for low power silicon n-p-n switching transistors. 20 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead
BS 9364 N011:1978 BS 9364 N011:1978. Detail specification for low power silicon p-n-p switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessm
BS 9364 N012:1978 BS 9364 N012:1978. Detail specification for low power silicon p-n-p switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version). Full plu
BS 9364 N013:1979 BS 9364 N013:1979. Detail specification for low power silicon p-n-p switching transistors. 25 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessm
BS 9364 N016:1979 BS 9364 N016:1979. Detail specification for low power silicon n-p-n switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation. Full plus additional assessm
BS 9364 N017:1979 BS 9364 N017:1979. Detail specification for low power silicon n-p-n switching transistors. 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version). Full plu
BS 9370:1983 BS 9370:1983. Specification for capability approval of light emitting and infra-red diode arrays of assessed quality: generic data and methods of test
BS EN 150001:1993 BS EN 150001:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: general purpose semiconductor diodes
BS CECC 50008:1982 BS CECC 50008:1982. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: ambient-rated rectifier diodes
BS CECC 50009:1982 BS CECC 50009:1982. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: case-rated rectifier diodes
BS EN 150010:1993 BS EN 150010:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: ambient rated thyristors
BS EN 150011:1993 BS EN 150011:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: case-rated thyristors
BS EN 150012:1993 BS EN 150012:1993. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: single gate field-effect transistors
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
