BIS Standards Catalogue
BS 4185:Part 6:1985 BS 4185:Part 6:1985. Machine tool components. Specification for change gears
BS 3683-4:1985 BS 3683-4:1985. Glossary of terms used in non-destructive testing. Ultrasonic flaw detection
BS 1000[664]:1985 BS 1000[664]:1985. Universal Decimal Classification. English full edition. Preparation and preservation of solid foodstuffs
BS 1780:1985 BS 1780:1985. Specification for bourdon tube pressure and vacuum gauges
BS 3062:1985 BS 3062:1985. Specification for ophthalmic lens materials
BS 3779:1985 BS 3779:1985. Specification for glass and glass polyester fibre woven tapes for electrical purposes
BS 4791:1985 BS 4791:1985. Specification for calorimeter bombs
BS 5268:Part 3:1985 BS 5268:Part 3:1985. Structural use of timber. Code of practice for trussed rafter roofs
BS 5588:Part 2:1985 BS 5588:Part 2:1985. Fire precautions in the design, construction and use of buildings. Code of practice for shops
BS 5628:Part 2:1985 BS 5628:Part 2:1985. Code of practice for use of masonry. Structural use of reinforced and prestressed masonry
BS 6561:1985 BS 6561:1985. Specification for zinc alloy sheet and strip for building
BS 6625:Part 1:1985 BS 6625:Part 1:1985. Spectacle frames. Specification for general requirements
BS 3G 100-0:1980 BS 3G 100-0:1980. Specification for general requirements for electrical equipment and indicating instruments for aircraft. Introduction
BS 3G 100-1:1973 BS 3G 100-1:1973. Specification for general requirements for equipment for use in aircraft. Identification and declarations
BS 2G 100-2:1962 BS 2G 100-2:1962. Specification for general requirements for electrical equipment and indicating instruments for aircraft. Environmental and operating conditions
BS 3G 100-2.1:1973 BS 3G 100-2.1:1973. Specification for general requirements for equipment for use in aircraft. All equipment. Construction
BS 3G 100-2.2:1972 BS 3G 100-2.2:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Magnetic influence
BS 3G 100-3:1979 BS 3G 100-3:1979. Specification for general requirements for equipment for use in aircraft. Characteristics of aircraft electrical power supplies
BS 3G 100-2.3.0:1972 BS 3G 100-2.3.0:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Standard test requirements
BS 3G 100-2.3.1:1969 BS 3G 100-2.3.1:1969. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Vibration
BS 3G 100-2.3.2:1970 BS 3G 100-2.3.2:1970. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Temperature-pressure requirements
BS 3G 100-2.3.3:1972 BS 3G 100-2.3.3:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Mould growth
BS 3G 100-2.3.4:1972 BS 3G 100-2.3.4:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Differential pressure requirements
BS 3G 100-2.3.5:1972 BS 3G 100-2.3.5:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Explosion-proofness
BS 3G 100-2.3.6:1972 BS 3G 100-2.3.6:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Acceleration requirements
BS 3G 100-2.3.7:1972 BS 3G 100-2.3.7:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Tropical exposure
BS 3G 100-2.3.8:1972 BS 3G 100-2.3.8:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Salt mist
BS 3G 100-2.3.9:1972 BS 3G 100-2.3.9:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Ice formation
BS 3G 100-2.3.10:1974 BS 3G 100-2.3.10:1974. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Impact icing
BS 3G 100-2.3.11:1973 BS 3G 100-2.3.11:1973. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Water-proofness
BS 3G 100-2.3.13:1973 BS 3G 100-2.3.13:1973. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Resistance to fire in designated fire zo
BS 3G 100-2.3.14:1973 BS 3G 100-2.3.14:1973. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Acoustic vibration
BS 3G 100-2.3.15:1978, ISO 2657-1976 BS 3G 100-2.3.15:1978, ISO 2657-1976. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Change of
BS 3G 100-4.1:1973 BS 3G 100-4.1:1973. Specification for general requirements for equipment for use in aircraft. Electrical equipment. Construction and general
BS 3G 100-4.1.1:1982, ISO 2678-1977 BS 3G 100-4.1.1:1982, ISO 2678-1977. Specification for general requirements for equipment for use in aircraft. Electrical equipment. Construction and general. Elect
BS G 102:1971 BS G 102:1971. Specification for general requirements for rotating electrical machinery
BS 2G 111:1955 BS 2G 111:1955. Specification for rate of climb indicators for aircraft
BS 2G 112:1956 BS 2G 112:1956. Specification for air-driven directional gyroscopes for aircraft
BS 2G 113:1956 BS 2G 113:1956. Specification for manifold pressure gauges for aircraft
BS 2G 114:1953 BS 2G 114:1953. Specification for direct current ratiometer indicators for aircraft
BS 2G 115:1956 BS 2G 115:1956. Specification for sensitive altimeters for aircraft
BS 2G 117:1975 BS 2G 117:1975. Specification for pressure-driven airspeed indicators
BS G 118:1949 BS G 118:1949. Specification for aircraft magnetic compass, direct-reading
BS G 122:1949 BS G 122:1949. Specification for aircraft magnetic compass, remote-reading (gyro-stabilized)
BS G 123:1949 BS G 123:1949. Specification for aircraft magnetic compass, remote-reading (non-stabilized)
BS 2G 124-1:1966 BS 2G 124-1:1966. Specification for a.c. generators for aircraft. Constant frequency
BS 2G 124-2:1966 BS 2G 124-2:1966. Specification for a.c. generators for aircraft. Variable frequency
BS G 125:1950 BS G 125:1950. Specification for turn and slip indicators for aircraft purposes
BS 2G 127:1967 BS 2G 127:1967. Specification for power and current transformers for use in aircraft electrical power supply systems
BS 2G 132:1981 BS 2G 132:1981. Specification for general requirements for electromagnetically operated contactors for aircraft
BS G 133:1951 BS G 133:1951. Specification for electro-magnetic indicators for extra low voltage aircraft systems
BS 2G 134:1970 BS 2G 134:1970. Specification for d.c. generators
BS 2G 135:1967 BS 2G 135:1967. Specification for electrically-heated pitot and pitotstatic pressure heads
BS G 142:1953 BS G 142:1953. Specification for heavy duty, electro-magnetically operated, single-pole circuit-breakers for extra-low voltage d.c. systems in aircraft
BS 2G 143:1965 BS 2G 143:1965. Specification for a.c. and d.c. rotary and linear actuators for aircraft
BS 2G 146:1966 BS 2G 146:1966. Specification for d.c. motors for aircraft
BS 2G 147-1:1966 BS 2G 147-1:1966. Specification for a.c. motors for aircraft. Three-phase constant frequency squirrel-cage induction motors
BS 2G 147-2:1966 BS 2G 147-2:1966. Specification for a.c. motors for aircraft. Three-phase variable frequency squirrel-cage induction motors
BS 3G 148:1981 BS 3G 148:1981. Specification for general purpose platinum temperature sensors for aircraft
BS G 152:1956 BS G 152:1956. Specification for a.c. electrically-operated artificial horizons for aircraft
BS G 154:1958 BS G 154:1958. Screws with captive washers for aircraft
BS G 174:1959 BS G 174:1959. Invertors for secondary electrical supplies for aircraft
BS G 175:1959 BS G 175:1959. Aircraft fuel nozzle grounding plugs and sockets
BS G 176-1:1960 BS G 176-1:1960. Specification for cartridge fuses for aircraft. General requirements
BS G 176-2:1960 BS G 176-2:1960. Specification for cartridge fuses for aircraft. Cartridge fuses and fuse-links (Type A)
BS G 176-3:1961 BS G 176-3:1961. Specification for cartridge fuses for aircraft. Cartridge fuse-links (Type B)
BS G 176-4:1962 BS G 176-4:1962. Specification for cartridge fuses for aircraft. Cartridge fuse-links (Type C)
BS G 176-5:1966 BS G 176-5:1966. Specification for cartridge fuses for aircraft. Cartridge fuse-links (Type D)
BS G 177:1961 BS G 177:1961. Specification for Nyvin type electrical cables for aircraft
BS G 179:Part 1:1962 BS G 179:Part 1:1962. Specification for hand-operated circuit-breakers for aircraft. Single-pole circuit-breakers
BS G 179:Part 2:1966 BS G 179:Part 2:1966. Specification for hand-operated circuit-breakers for aircraft. Three-pole circuit-breakers
BS 2G 180:1974 BS 2G 180:1974. Specification for permanent splicing of aircraft electrical cables
BS 2G 182:1975 BS 2G 182:1975. Specification for pressure-driven machmeters for aircraft
BS G 183:1963 BS G 183:1963. Specification for interconnections in analogue data transmission systems in aircraft
BS G 184 to G 188:1964 BS G 184 to G 188:1964. Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables
BS G 189:1964 BS G 189:1964. Specification for Tersil type electrical cables for aircraft
BS G 190:1964 BS G 190:1964. Specification for cabin altimeters for aircraft
BS G 192:1965 BS G 192:1965. Specification for Efglas type electric cables with copper conductors for aircraft
BS G 193:1966 BS G 193:1966. Specification for aircraft lampholders
BS G 195:1966 BS G 195:1966. Specification for Minyvin type electric cables for aircraft
BS 2G 196:1971 BS 2G 196:1971. Specification for static invertors
BS 3G 197:1982 BS 3G 197:1982. Specification for stud-type terminal blocks for terminations on aircraft electric cables
BS 2G 198:Part 2:1982 BS 2G 198:Part 2:1982. Sleeves for aircraft electric cables and equipment wires. Specification for slip-on sleeves for identification purposes
BS 2G 199:1984 BS 2G 199:1984. Schedule for tables relating to altitudes, airspeed and Mach numbers for use in aeronautical instrument design and calibration
BS 1016-1:1973 BS 1016-1:1973. Methods for analysis and testing of coal and coke. Total moisture of coal
BS 1016-2:1973 BS 1016-2:1973. Methods for analysis and testing of coal and coke. Total moisture of coke
BS 1016:Part 11:1977 BS 1016:Part 11:1977. Methods for analysis and testing of coal and coke. Forms of sulphur in coal
BS 1016-14:1963 BS 1016-14:1963. Methods for analysis and testing of coal and coke. Analysis of coal ash and coke ash
BS 1016:Part 17:1979 BS 1016:Part 17:1979. Methods for analysis and testing of coal and coke. Size analysis of coal
BS 1016:Part 18:1981 BS 1016:Part 18:1981. Methods for analysis and testing of coal and coke. Size analysis of coke
BS 1016:Part 20:1981, ISO 5074-1980 BS 1016:Part 20:1981, ISO 5074-1980. Methods for analysis and testing of coal and coke. Determination of Hardgrove grindability index of hard coal
BS 1016-21:1981, ISO 1018:1975 BS 1016-21:1981, ISO 1018:1975. Methods for analysis and testing of coal and coke. Determination of moisture-holding capacity of hard coal
BS 3142-3:1970 BS 3142-3:1970. Specification for manufactured solid smokeless fuels for household use. Specially reactive fuels for all types of domestic open fire
BS 3156:Part 4:1969 BS 3156:Part 4:1969. Analysis of fuel gases. Gas chromatographic analysis
BS 3804:Part 1:1964 BS 3804:Part 1:1964. Methods for the determination of the calorific value of fuel gases. Non-recording methods
BS 4262:1984 BS 4262:1984. Method of specifying the technical quality of coke for use in blast furnaces
BS 4445:1969 BS 4445:1969. Schedule of tests for gasification and reforming plants using hydrocarbon feedstocks
BS 4845-1:1972 BS 4845-1:1972. Methods for sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags. Sampling of coke
BS 4845-2:1979 BS 4845-2:1979. Methods for sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags. Sampling of solid smokeless fu
BS 6127:Part 1:1981 BS 6127:Part 1:1981. Petrographic analysis of bituminous coal and anthracite. Glossary of terms relating to the petrographic analysis of bituminous coal and anthracite
BS 6127-2:1982 BS 6127-2:1982. Petrographic analysis of bituminous coal and anthracite. Method of preparing coal samples for petrographic analysis
BS 6127:Part 3:1981 BS 6127:Part 3:1981. Petrographic analysis of bituminous coal and anthracite. Method of determining maceral group composition of bituminous coal and anthracite
BS 6127:Part 5:1981 BS 6127:Part 5:1981. Petrographic analysis of bituminous coal and anthracite. Method of determining microscopically the reflectance of vitrinite
BS 2740:1969 BS 2740:1969. Specification for simple smoke alarms and alarm metering devices
BS 2741:1969 BS 2741:1969. Recommendations for the construction of simple smoke viewers
BS 2742:1969 BS 2742:1969. Notes on the use of the Ringelmann and miniature smoke charts
BS 2811:1969 BS 2811:1969. Specification for smoke density indicators and recorders
BS 893:1978 BS 893:1978. Method for the measurement of the concentration of particulate material in ducts carrying gases
BS 3048:1958 BS 3048:1958. Code for the continuous sampling and automatic analysis of flue gases: indicators and recorders
BS 3407:1982 BS 3407:1982. Guide for assessing coke screening plant
BS 4161-1:1967 BS 4161-1:1967. Gas meters. Meters of plate construction up to 1000 cubic feet per hour rating
BS 4161-2:1967 BS 4161-2:1967. Gas meters. Meters of plate construction above 1000 cubic feet (28 cubic metres) per hour rating
BS 4161-4:1970 BS 4161-4:1970. Gas meters. Plate constructed positive displacement diaphragm meters for a pressure of 350 mbar (5 lbf/in2) and up to 170 cubic meters (6000 cubic feet) per hour rating
BS 4161-7:1973 BS 4161-7:1973. Gas meters. Mechanical volume correctors
BS 4878:1973 BS 4878:1973. Specification for large (vee-throated) haulage rope pulleys for mines and quarries
BS 2593:1974 BS 2593:1974. Specification for rotary drill rods and tungsten carbide tipped rotary drill bits
BS 227:1970 BS 227:1970. Specification for H-section steel arches for use in mines
BS 248:1969 BS 248:1969. Specification for light rails and fishplates for use at mines
BS 2969:1980, ISO 610-1979 BS 2969:1980, ISO 610-1979. Specification for high-tensile steel chains (round link) for chain conveyors and coal ploughs
BS 3237:1960 BS 3237:1960. Specification for light and medium rolling stock for mineral haulage in mines
BS 4073:1966 BS 4073:1966. Specification for heavy rolling stock for mineral haulage in mines
BS 4521-1.1:1971 BS 4521-1.1:1971. Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate. Turnouts using bull head rails
BS 4521-1.2:1971 BS 4521-1.2:1971. Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate. Turnouts using flat bottom rail
BS 4521-2:1975 BS 4521-2:1975. Specification for railway turnouts for private users. Light grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 10 tons,
BS 4521-3.1:1974 BS 4521-3.1:1974. Specification for railway turnouts for private users. Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 t
BS 4521-3.2:1975 BS 4521-3.2:1975. Specification for railway turnouts for private users. Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 t
BS 4521-4:1975 BS 4521-4:1975. Specification for railway turnouts for private users. Heavy grade turnouts over which British Railways locomotives do not operate, for axle loads which may exceed 25 ton
BS 4854:1972 BS 4854:1972. Specification for cars for manriding in mines
BS 600:1935 BS 600:1935. The application of statistical methods to industrial standardization and quality control
BS 4497:1969 BS 4497:1969. Recommendations for the detection and estimation of nitrogenous treating agents in paper
BS 4498:1982, ISO 302:1981 BS 4498:1982, ISO 302:1981. Method for determination of the Kappa number of pulp (degree of delignification)
BS 4499:1984, ISO 692-1982 BS 4499:1984, ISO 692-1982. Method for determination of alkali solubility of pulp
BS 4501:1969 BS 4501:1969. Method for the extraction from pulps of materials soluble in dichloromethane
BS 4574:1970 BS 4574:1970. Recommendation for the determination of the ink absorbency of paper and board by use of K & N ink
BS 4588:1970 BS 4588:1970. Methods of test for determining the registration obtained on duplicating machines
BS 4616:1970 BS 4616:1970. Recommendations for the determination of the compressibility of paper and board by the Bendtsen method
BS 4747:Part 1:1980, ISO 801/1-1979 BS 4747:Part 1:1980, ISO 801/1-1979. Methods for determination of saleable mass, in lots, of pulp. Pulp baled in sheet form
BS 4747:Part 2:1980, ISO 801/2-1979 BS 4747:Part 2:1980, ISO 801/2-1979. Methods for determination of saleable mass, in lots, of pulp. Pulps (such as flash-dried) baled in slabs
BS 4896:1973 BS 4896:1973. Method for the determination of ash of pulp
BS 4897-1:1983, ISO 777-1982 BS 4897-1:1983, ISO 777-1982. Trace metal contents of pulps. Method for determination of calcium content by edta titrimetric and flame atomic absorption spectrometric meth
BS 5477:1977 BS 5477:1977. Method for visual assessment, by grid assay, of dirt in paper for character recognition
BS 5879:1980, ISO 5635-1978 BS 5879:1980, ISO 5635-1978. Method for measurement of dimensional change of paper after immersion in water
BS 6035-1:1981, ISO 5267/1-1979 BS 6035-1:1981, ISO 5267/1-1979. Methods for determination of the drainability of pulp. Schopper-Riegler method
BS 6035-2:1982, ISO 5267-2:1980 BS 6035-2:1982, ISO 5267-2:1980. Methods for determination of the drainability of pulp. 'Canadian Standard' freeness method
BS 6036:1985 BS 6036:1985. Method for determination of the edgewise crush resistance of corrugated fibreboard
BS 6094-1:1981, ISO 5264-1:1979 BS 6094-1:1981, ISO 5264-1:1979. Methods for laboratory beating of pulps. Valley beater method
BS EN 25264-2:1994, ISO 5264-2:1979 BS EN 25264-2:1994, ISO 5264-2:1979. Pulps. Laboratory beating. PFI mill method
BS 6095:1981, ISO 5270-1979 BS 6095:1981, ISO 5270-1979. Methods for determination of the physical properties of laboratory sheets made from pulps
BS EN 27213:1993, ISO 7213:1981 BS EN 27213:1993, ISO 7213:1981. Method for sampling pulps for testing
BS 6306-1:1982, ISO 5351-1:1981 BS 6306-1:1982, ISO 5351-1:1981. Methods for determination of limiting viscosity number of cellulose in dilute solutions. Cupri-ethylene-diamine (CED) method
BS 6306-2:1982, ISO 5351-2:1981 BS 6306-2:1982, ISO 5351-2:1981. Methods for determination of limiting viscosity number of cellulose in dilute solutions. Iron (III) sodium tartrate complex (EWNNmod Na
BS 2045:1965 BS 2045:1965. Preferred numbers
BS 6000:1972 BS 6000:1972. Guide to the use of BS 6001, sampling procedures and tables for inspection by attributes
BS 5464-1:1977, ISO 1073-1:1976 BS 5464-1:1977, ISO 1073-1:1976. Optical character recognition. Character set OCR-A. Shapes and dimensions of the printed image
BS 5464-3:1983, ISO 2033:1983 BS 5464-3:1983, ISO 2033:1983. Optical character recognition. Method of coding machine readable characters (MICR and OCR) for information processing
BS 5079:1981 BS 5079:1981. Specification for information interchange on 3.81 mm (0.150 in) magnetic tape cassette at 4 cpmm (100 cpi), phase encoded at 63 ftpmm (1600 ftpi)
BS 4850:Part 1:1972 BS 4850:Part 1:1972. Specification for magnetic six-disk packs for data processing. Mechanical and magnetic properties
BS 4850:Part 2:1972 BS 4850:Part 2:1972. Specification for magnetic six-disk packs for data processing. Track format
BS 5356:Part 1:1976 BS 5356:Part 1:1976. Specification for magnetic single-disk cartridges (top loading) for data processing. Mechanical and magnetic properties
BS 5356:Part 2:1976 BS 5356:Part 2:1976. Specification for magnetic single-disk cartridges (top loading) for data processing. Track format
BS 5359:1976 BS 5359:1976. Specification for magnetic eleven-disk packs for data processing. Mechanical and magnetic properties
BS 5595:Part 1:1978, ISO 4337-1977 BS 5595:Part 1:1978, ISO 4337-1977. Interchangeable magnetic twelve-disk pack for information processing. Specification for 100 Mbytes magnetic twelve-disk pack
BS 5595:Part 2:1981, ISO 5653-1980 BS 5595:Part 2:1981, ISO 5653-1980. Interchangeable magnetic twelve-disk pack for information processing. Specification for 200 Mbytes magnetic twelve-disk pack
BS 4810:1980, ISO 1004-1977 BS 4810:1980, ISO 1004-1977. Specification for print for magnetic ink character recognition
BS 5769-1:1979, ISO 4341-1978 BS 5769-1:1979, ISO 4341-1978. Specification for magnetic tape cassette and cartridge labelling and file structure, for information interchange. Label standard version 1
BS 5887:1980 BS 5887:1980. Code of practice for testing of computer-based systems
BS 6238:1982 BS 6238:1982. Code of practice for performance monitoring of computer-based systems
BS 5870:1980, ISO 4882-1979 BS 5870:1980, ISO 4882-1979. Recommendations for line spacings and character spacings for office machines and data processing equipment
BS 4822:1994 BS 4822:1994. Specification for keyboard allocation of graphic characters for data processing
BS 5448:1977, ISO 3791-1976 BS 5448:1977, ISO 3791-1976. Specification for keyboard layouts for numeric applications on office machines and data processing equipment
PD 6462:1972 PD 6462:1972. Modification of keyboards to include symbols for SI units
BS 2481-4:1985, ISO 5138/9-1984 BS 2481-4:1985, ISO 5138/9-1984. Typewriters. Glossary of terms
BS 5519-1:1977, ISO 2258:1976 BS 5519-1:1977, ISO 2258:1976. Ribbons and spools used on office machines and data processing equipment. Minimum markings to appear on containers of printing ribbons
BS 5519-2:1982, ISO 2257-1980 BS 5519-2:1982, ISO 2257-1980. Ribbons and spools used on office machines and data processing equipment. Specification for widths of fabric printing ribbons on spools up
BS 5519-3:1977, ISO 2775-1977 BS 5519-3:1977, ISO 2775-1977. Ribbons and spools used on office machines and data processing equipment. Widths of one-time paper or plastic printing ribbons up to 19 mm
BS 5519-4:1977, ISO 3540-1976 BS 5519-4:1977, ISO 3540-1976. Ribbons and spools used on office machines and data processing equipment. Characteristics of cores for paper or plastic printing ribbons
BS 5519-5:1977, ISO 3866-1977 BS 5519-5:1977, ISO 3866-1977. Ribbons and spools used on office machines and data processing equipment. Recommendations for widths of fabric printing ribbons on spools e
BS 5479-1:1977, ISO 2132-1972 BS 5479-1:1977, ISO 2132-1972. Duplicators and document copying machines. Attachment features of plates of offset duplicators
BS 5479-2:1977, ISO 2133-1976 BS 5479-2:1977, ISO 2133-1976. Duplicators and document copying machines. Minimum overprint and attachment features of stencils for duplicators
BS 5479-3:1981, ISO 5138/2-1980 BS 5479-3:1981, ISO 5138/2-1980. Duplicators and document copying machines. Glossary of terms for duplicators
BS 5960:1980, ISO 4232/1-1979 BS 5960:1980, ISO 4232/1-1979. Specification for minimum information to be included in specification sheets of duplicators
BS 6050:1981, ISO 4232/2-1980 BS 6050:1981, ISO 4232/2-1980. Specification for minimum information to be included in specification sheets of document copying machines
BS 5560:1978, ISO 3883-1977 BS 5560:1978, ISO 3883-1977. Specification for office machines - line and character capacity of address masters
BS 3738-1:1980, ISO 5138/I-1978 BS 3738-1:1980, ISO 5138/I-1978. Dictation equipment. Glossary of terms
BS 3738-2:1980, ISO 4062-1977 BS 3738-2:1980, ISO 4062-1977. Dictation equipment. Specification for symbols
BS 3738-3:1980, ISO 1730-1980 BS 3738-3:1980, ISO 1730-1980. Dictation equipment. Specification for basic operating requirements
BS 5479-4:1985 BS 5479-4:1985. Duplicators and document copying machines. Glossary of terms for document copying machines
BS 4897-2:1983, ISO 778-1982 BS 4897-2:1983, ISO 778-1982. Trace metal contents of pulps. Method for determination of copper content by extraction-photometric and flame atomic absorption spectrometric
BS 4897-3:1983, ISO 779-1982 BS 4897-3:1983, ISO 779-1982. Trace metal contents of pulps. Method for determination of iron content by 1,10-phenanthroline photometric and flame atomic absorption spectr
BS 4897-4:1983, ISO 1830:1982 BS 4897-4:1983, ISO 1830:1982. Trace metal contents of pulps. Method for determination of manganese content by sodium periodate photometric and flame atomic absorption sp
BS 1000[636/639]:1981 BS 1000[636/639]:1981. Universal Decimal Classification. English full edition. Animal breeding. Animal produce. Hunting. Fishing
BS 1000[64]:1984 BS 1000[64]:1984. Universal Decimal Classification. English full edition. Home economics
BS 1000[654]:1983 BS 1000[654]:1983. Universal Decimal Classification. English full edition. Telecommunication and telecontrol (organization, services)
BS 1000[661]:1983 BS 1000[661]:1983. Universal Decimal Classification. English full edition. Chemical products
BS 1000[662]:1983 BS 1000[662]:1983. Universal Decimal Classification. English full edition. Explosives. Fuels
BS 1000[665]:1979 BS 1000[665]:1979. Universal Decimal Classification. English full edition. Oils. Fats. Waxes. Adhesives. Gums. Resins
BS 1000[666]:1984 BS 1000[666]:1984. Universal Decimal Classification. English full edition. Glass industry. Ceramics. Cement and concrete
BS 1000[678]:1981 BS 1000[678]:1981. Universal Decimal Classification. English full edition. Industries based on macromolecular materials. Rubbers. Plastics
BS 1000[679]:1983 BS 1000[679]:1983. Universal Decimal Classification. English full edition. Industries based on various processable materials. Cable and cordage industries. Stone industry
BS 1000[68/681.3]:1982 BS 1000[68/681.3]:1982. Universal Decimal Classification. English full edition. Finished articles in general. Precision mechanisms. Horology. Instrumentation. Data processing eq
BS 1000[681.5]:1976 BS 1000[681.5]:1976. Universal Decimal Classification. English full edition. Automatic control engineering
BS 1000[681.7]:1975 BS 1000[681.7]:1975. Universal Decimal Classification. English full edition. Optical apparatus and instruments
BS 1000[681.8/.9]:1972 BS 1000[681.8/.9]:1972. Universal Decimal Classification. English full edition. Technical acoustics. Musical instruments. Engraving and sculpting machines
BS 1000[682/683]:1973 BS 1000[682/683]:1973. Universal Decimal Classification. English full edition. Smithery. Farriery. Hand-forged ironwork. Ironmongery. Hardware. Locksmithing. Gunsmithing. Bottlin
BS 1000[684]:1979 BS 1000[684]:1979. Universal Decimal Classification. English full edition. Furniture and allied industries
BS 1000[685]:1972 BS 1000[685]:1972. Universal Decimal Classification. English full edition. Travel, sports, games and other equipment
BS 1000[686]:1971 BS 1000[686]:1971. Universal Decimal Classification. English full edition. Bookbinding. Metallizing. Mirror making. Stationery
BS 1000[69]:1981 BS 1000[69]:1981. Universal Decimal Classification. English full edition. Building
BS 1000[71]:1976 BS 1000[71]:1976. Universal Decimal Classification. English full edition. Physical planning
BS 1000[72]:1975 BS 1000[72]:1975. Universal Decimal Classification. English full edition. Architecture
BS 1000[73/76]:1977 BS 1000[73/76]:1977. Universal Decimal Classification. English full edition. Various arts and crafts
BS 1000[78]:1971 BS 1000[78]:1971. Universal Decimal Classification. English full edition. Music
BS 1000[79]:1971 BS 1000[79]:1971. Universal Decimal Classification. English full edition. Recreation. Entertainment. Amusements. Pastimes
BS 1000[9]:1972 BS 1000[9]:1972. Universal Decimal Classification. English full edition. Geography. Biography. History
BS G 201:1967 BS G 201:1967. Specification for counter and pointer pressure altimeters
BS G 203:1967 BS G 203:1967. Specification for Unified screws with captive facing and locking washers
BS G 204:1967 BS G 204:1967. Specification for copper terminal ends for crimping to electric cables with copper conductors
BS G 206:1969 BS G 206:1969. Specification for Fepsil type electric cables with copper conductors
BS G 207:1969 BS G 207:1969. Specification for aircraft electrical circuit diagrams
BS G 208:1970 BS G 208:1970. Specification for general requirements for electrical relays up to 10 A rating
BS G 209:1970 BS G 209:1970. Specification for transformer rectifier units
BS G 211:1971 BS G 211:1971. Specification for reflection-reducing coating of instrument windows and lighting wedges
BS G 212:1971 BS G 212:1971. Specification for general requirements for aircraft electrical cables
BS G 217:1975 BS G 217:1975. Specification for general requirements for cockpit lighting controllers
BS 2G 219:1983, ISO 6858-1982 BS 2G 219:1983, ISO 6858-1982. Specification for general requirements for ground support electrical supplies for aircraft
BS 2G 221:1980 BS 2G 221:1980. Specification for Minyvin type electric cables (metric units)
BS G 222:1976 BS G 222:1976. Specification for Efglas type electric cables (metric units)
BS G 224:1978 BS G 224:1978. Specification for lever-operated manual switches for aircraft
BS G 225:1979 BS G 225:1979. Specification for performance of environment-resistant terminal junction modules with removable crimp-type contacts
BS G 226:1979 BS G 226:1979. Specification for counter and pointer, servo type, pressure altimeter systems
BS G 227:1979 BS G 227:1979. Specification for Tersil type electric cables (metric units)
BS G 228:1981, ISO 2315-1980 BS G 228:1981, ISO 2315-1980. Specification for clearance and fixing dimensions for 2 A and 3 A, two- and four-pole sealed electromagnetic relays for aircraft
BS HC 1:1973 BS HC 1:1973. Specification for carbon steel castings (500 N/mm2)
BS HC 2:1973 BS HC 2:1973. Specification for carbon-manganese steel castings (550 N/mm2)
BS HC 3:1973 BS HC 3:1973. Specification for 1% chromium-molybdenum low alloy steel castings (700 N/mm2)
BS HC 4:1973 BS HC 4:1973. Specification for 3% chromium-molybdenum steel castings (620-770 N/mm2)
BS HC 5:1973 BS HC 5:1973. Specification for 3% nickel case hardening steel castings (700 N/mm2)
BS HC 6:1973 BS HC 6:1973. Specification for 3% chromium-molybdenum nitriding steel castings (850-1000 N/mm2)
BS HC 7:1974 BS HC 7:1974. Specification for 3% chromium-molybdenum steel castings (880-1080 MPa)
BS HC 8:1974 BS HC 8:1974. Specification for 3% chromium-molybdenum steel castings (1150-1300 MPa)
BS HC 9:1974 BS HC 9:1974. Specification for nickel-chromium-molybdenum steel castings (880-1080 MPa)
BS HC 10:1974 BS HC 10:1974. Specification for nickel-chromium-molybdenum steel castings (1150-1300 MPa)
BS HC 100:1972 BS HC 100:1972. Inspection and testing procedure for iron, nickel, copper, cobalt and refractory metal base alloy castings
BS HC 103:1974 BS HC 103:1974. Specification for 23% chromium-nickel-tungsten corrosion-resisting steel castings (Cr 23, Ni 11, W 3)
BS HC 105:1974 BS HC 105:1974. Specification for 18% chromium-11% nickel-2.5% molybdenum niobium-stabilized corrosion-resisting steel castings (500 MPa)
BS HC 106:1974 BS HC 106:1974. Specification for precipitaton hardening chromium-nickel-copper corrosion-resisting steel castings (1250-1500 MPa) (Cr 16, Ni 4, Cu 3)
BS HC 202:1973 BS HC 202:1973. Specification for precipitation hardening nickel base chromium-niobium-molybdenum-iron-tungsten alloy castings (Cr 20.0, Nb 6.6, Mo 6.0, Fe 3.0, W 2.5)
BS HC 205:1974 BS HC 205:1974. Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy castings (Cr 20, Co 20, Mo 6, Ti 2)
BS HC 206:1975 BS HC 206:1975. Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy precision castings (Cr 20, Co 20, Mo 6, Ti 2)
BS HC 301:1973 BS HC 301:1973. Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5)
BS HC 401:1974 BS HC 401:1974. Specification for 18% nickel maraging steel precision castings (1600-1850 MPa)
BS HC 403:1977 BS HC 403:1977. Specification for high chromium alloy cast iron ring pots (centrifugally cast) (suitable for piston rings up to 400 mm in diameter)
BS HC 502:1981 BS HC 502:1981. Specification for copper base aluminium-nickel-iron alloy castings (620 MPa) (Al 9.5, Ni 5, Fe 5)
BS 2HR 1:1973 BS 2HR 1:1973. Specification for nickel-chromium-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
BS 2HR 2:1973 BS 2HR 2:1973. Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
BS HR 3:1972 BS HR 3:1972. Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14.8, Mo 5, Al 4.7, Ti
BS HR 4:1972 BS HR 4:1972. Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14.2, Al 5, Mo 4, Ti 4)
BS HR 5:1972 BS HR 5:1972. Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4)
BS HR 6:1972 BS HR 6:1972. Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)
BS HR 10:1972 BS HR 10:1972. Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, A
BS HR 40:1972 BS HR 40:1972. Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base, Cr 20, W 15, Ni 10, Mn 1.5)
BS HR 51:1973 BS HR 51:1973. Specification for heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 2, Mn 1.5, Mo 1.2, Si 0.7, V 0.3, Fe remainder)
BS HR 52:1973 BS HR 52:1973. Specification for heat-resisting alloy billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder)
BS HR 55:1980 BS HR 55:1980. Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, F
BS 2HR 201:1974 BS 2HR 201:1974. Specification for nickel-chromium-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
BS 2HR 202:1973 BS 2HR 202:1973. Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy sheet and strip (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
BS HR 203:1972 BS HR 203:1972. Specification for nickel-chromium-titanium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 0.4)
BS HR 204:1972 BS HR 204:1972. Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6)
BS HR 206:1973 BS HR 206:1973. Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
BS HR 207:1973 BS HR 207:1973. Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remaind
BS HR 240:1972 BS HR 240:1972. Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate, sheet and strip (cobalt base Cr 20, W 15, Ni 10, Mn 1.5)
BS HR 251:1974 BS HR 251:1974. Specification for heat-resisting alloy plate, sheet and strip (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3, Fe remainder)
BS 2HR 401:1973 BS 2HR 401:1973. Specification for nickel-chromium-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
BS HR 402:1973 BS HR 402:1973. Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
BS HR 403:1973 BS HR 403:1973. Specification for nickel-chromium-titanium heat-resisting alloy cold-worked and softened seamless tubes (nickel base, Cr 19.5, Ti 0.4)
BS HR 404:1973 BS HR 404:1973. Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy cold worked solution treated seamless tubes (nickel base, Co 20, Cr 20, Mo 5.
BS 2HR 501:1973 BS 2HR 501:1973. Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
BS 2HR 502:1973 BS 2HR 502:1973. Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn and solution heat treated wire for springs (nickel base, Cr 19.5, Co 18.0,
BS 2HR 503:1973 BS 2HR 503:1973. Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire for thread inserts (0.45 mm to 2 mm diameter) (nickel base, Cr 19.5, Co 18.0, Ti
BS 2HR 504:1973 BS 2HR 504:1973. Specification for nickel-chromium-titanium heat-resisting alloy bar, wire and rivets (nickel base, Cr 19.5, Ti 0.4)
BS HR 505:1981 BS HR 505:1981. Specification for nickel-chromium-iron-titanium-niobium-aluminium heat-resisting alloy round wire for thread inserts (maximum diameter 2 mm) (nickel base, Cr 15.5, Fe 7.
BS HR 650:1972 BS HR 650:1972. Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.
BS 3L 51:1970 BS 3L 51:1970. Specification for ingots and castings of aluminium-silicon-copper-iron-nickel-magnesium alloy (precipitation treated) (Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1)
BS 3L 58:1971 BS 3L 58:1971. Specification for wire for solid, cold-forged rivets of aluminium-5% magnesium alloy (not exceeding 10 mm diameter)
BS 3L 63:1971 BS 3L 63:1971. Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS 2L 77:1971 BS 2L 77:1971. Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn
BS 3L 78:1970 BS 3L 78:1970. Specification for ingots and castings of aluminium-silicon-copper-magnesium alloy (solution treated and precipitation treated) (Si 5, Cu 1.2, Mg 0.5)
BS 2L 83:1971 BS 2L 83:1971. Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated)
BS 2L 84:1971 BS 2L 84:1971. Specification for bars and extruded sections of aluminium-copper-silicon-magnesium alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or
BS 2L 85:1971 BS 2L 85:1971. Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si
BS 3L 86:1971 BS 3L 86:1971. Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3)
BS 2L 87:1971 BS 2L 87:1971. Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation tr
BS 2L 88:1971 BS 2L 88:1971. Specification for aluminium-alloy-coated sheet and strip of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and precipitation treated) (Zn 5.8, Mg 2.5, Cu
BS 2L 93:1971 BS 2L 93:1971. Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, M
BS 2L 95:1971 BS 2L 95:1971. Specification for plate of aluminium-zinc-magnesium-copper-chromium alloy (solution treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.
BS 2L 97:1971 BS 2L 97:1971. Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated, controlled stretched and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)
BS 2L 98:1971 BS 2L 98:1971. Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature: not controlled stretched) (Cu 4.4, Mg 1.5, Mn 0.6)
BS 2L 99:1972 BS 2L 99:1972. Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and precipitation treated) (Si 7, Mg 0.3)
BS L 103:1971 BS L 103:1971. Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.7,
BS L 105:1971 BS L 105:1971. Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4,
BS L 109:1971 BS L 109:1971. Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)
BS L 110:1971 BS L 110:1971. Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (supplied for solution treatment by the user) (Cu 4.4, Mg 1.5, Mn 0.6)
BS L 112:1971 BS L 112:1971. Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si
BS L 113:1971 BS L 113:1971. Specification for sheet and strip of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 114:1971 BS L 114:1971. Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable for weldi
BS L 115:1971 BS L 115:1971. Specification for plate of aluminium-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (not exceeding 25 mm thickness) (
BS L 117:1975 BS L 117:1975. Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thickne
BS L 118:1975 BS L 118:1975. Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness)
BS L 119:1975 BS L 119:1975. Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.
BS 3L 122:1970 BS 3L 122:1970. Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8, Zn 0.5, Mn 0.3)
BS 3L 124:1970 BS 3L 124:1970. Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated) (Al 10, Zn 0.5, Mn 0.3)
BS 3L 125:1970 BS 3L 125:1970. Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated and precipitation treated) (Al 10, Zn 0.5, Mn 0.3)
BS 2L 126:1970 BS 2L 126:1970. Specification for ingots and castings of magnesium-cerium-zinc-zirconium alloy (precipitation treated) (rare earth metals 3.0, Zn 2.3, Zr 0.6)
BS 2L 127:1970 BS 2L 127:1970. Specification for ingots and castings of magnesium-zinc-zirconium alloy (precipitation treated) (Zn 4.5, Zr 0.7)
BS 2L 128:1970 BS 2L 128:1970. Specification for ingots and castings of magnesium-zinc-cerium-zirconium alloy (precipitation treated) (Zn 4.5, rare earth metals 1.2, Zr 0.7)
BS L 156:1978 BS L 156:1978. Specification for sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 157:1978 BS L 157:1978. Specification for sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 158:1978 BS L 158:1978. Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, S
BS L 159:1978 BS L 159:1978. Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8,
BS L 161:1976 BS L 161:1976. Specification. Hand and die forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, C
BS L 162:1976 BS L 162:1976. Specification. Cold compressed hand forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, M
BS L 168:1978 BS L 168:1978. Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter
BS 2L 500:1973 BS 2L 500:1973. Procedure for inspection and testing of wrought magnesium-base alloys
BS 2L 503:1973 BS 2L 503:1973. Specification for tube of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0)
BS 2L 504:1973 BS 2L 504:1973. Specification for sheet and strip of magnesium-3% zinc-zirconium alloy (Zn 3.0, Zr 0.6)
BS 2L 505:1973 BS 2L 505:1973. Specification for bars and extruded sections of magnesium-3% zinc-zirconium alloy (not exceeding 100 mm diameter or minor sectional dimension) (Zn 3.0, Zr 0.6)
BS 2L 508:1973 BS 2L 508:1973. Specification for bars and extruded sections of magnesium-1?% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (not exceeding 50 mm diame
BS 2L 509:1973 BS 2L 509:1973. Specification for tube of magnesium-1?% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (Zn 1.25, Zr 0.6)
BS L 512:1973 BS L 512:1973. Specification for bars and extruded sections of magnesium-6% aluminium-zinc alloy (not exceeding 150 mm diameter or minor sectional dimension) (Al 6.0, Zn 1.0)
BS L 513:1973 BS L 513:1973. Specification for forging stock and forgings of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0)
BS L 514:1973 BS L 514:1973. Specification for forging stock and forgings of magnesium-3% zinc-zirconium alloy (Zn 3.0, Zr 0.6)
BS L 515:1973 BS L 515:1973. Specification for sheet and strip of magnesium-1?% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (Zn 1.25, Zr 0.6)
BS 4584-5:1972 BS 4584-5:1972. Specification for metal-clad base materials for printed circuits. Phenolic cellulose paper copper-clad laminated sheet of medium electrical quality: PF-CP-Cu-5
BS 4584-6:1972 BS 4584-6:1972. Specification for metal-clad base materials for printed circuits. Phenolic cellulose paper copper-clad laminated sheet of medium electrical quality, flame retardant grad
BS 4584-13:1977 BS 4584-13:1977. Specification for metal-clad base materials for printed circuits. Silicone woven glass fabric copper-clad laminated sheet Si-GC-Cu-13
BS 4584-15:1978 BS 4584-15:1978. Metal-clad base materials for printed wiring boards. Adhesive coated polymeric films: PETP-F-15 and PI-F-15
BS 5954:1980, IEC 60297:1975 BS 5954:1980, IEC 60297:1975. Specification for dimensions of panels and racks for electronic equipment
BS 6062:Part 1:1981, IEC 60286-1:1980 BS 6062:Part 1:1981, IEC 60286-1:1980. Packaging of electronic components for automatic handling. Specification for tape packaging of components with axial leads
BS 6096:Part 1:1981 BS 6096:Part 1:1981. Marking inks and solder resist coating materials for printed circuits. Methods of test
BS 6096:Part 2:1981 BS 6096:Part 2:1981. Marking inks and solder resist coating materials for printed circuits. Specification for marking inks
BS 6221-4:1982, IEC 60326-4:1980 BS 6221-4:1982, IEC 60326-4:1980. Printed wiring boards. Method for specifying single and double sided printed wiring boards with plain holes
BS 6221-5:1982, IEC 60326-5:1980 BS 6221-5:1982, IEC 60326-5:1980. Printed wiring boards. Specification for single and double sided rigid printed boards with plated-through holes
BS 6221-6:1982, IEC 60326-6:1980 BS 6221-6:1982, IEC 60326-6:1980. Printed wiring boards. Specification for multilayer printed wiring boards
BS 6221-7:1982, IEC 60326-7:1981 BS 6221-7:1982, IEC 60326-7:1981. Printed wiring boards. Method for specifying single and double sided flexible printed wiring boards without through connections
BS 6221-8:1982, IEC 60326-8:1981 BS 6221-8:1982, IEC 60326-8:1981. Printed wiring boards. Method for specifying single and double sided flexible printed wiring boards with through connections
BS 6221-20:1984 BS 6221-20:1984. Printed wiring boards. Guide for the assembly of printed wiring boards
BS 6221-21:1984 BS 6221-21:1984. Printed wiring boards. Guide for the repair of printed wiring boards
BS 6454:1983, IEC 60205:1966,IEC 60205A:1968,IEC 60205B:1974 BS 6454:1983, IEC 60205:1966,IEC 60205A:1968,IEC 60205B:1974. Method for calculation of the effective parameters of magnetic piece parts
BS 5695:1980, IEC 60451:1974 BS 5695:1980, IEC 60451:1974. Recommendations for maximum case dimensions for capacitors and resistors
BS 5786-1:1979, IEC 60418-1:1974 BS 5786-1:1979, IEC 60418-1:1974. Variable capacitors. Methods of test
BS 6201-1:1982, IEC 60384-1:1972 BS 6201-1:1982, IEC 60384-1:1972. Fixed capacitors for use in electronic equipment. Methods of test
BS 6201:Part 3:1982, IEC 60384-14:1981 BS 6201:Part 3:1982, IEC 60384-14:1981. Fixed capacitors for use in electronic equipment. Specification for fixed capacitors for radio interference suppression.
BS 6303:1982, IEC 60717:1981 BS 6303:1982, IEC 60717:1981. Method for determination of the space required by capacitors and resistors with unidirectional terminations
BS 2475:1964 BS 2475:1964. Specification for octave and one-third octave band-pass filters
BS 4668:1971 BS 4668:1971. Specification for an acoustic coupler (IEC reference type) for calibration of earphones used in audiometry
BS 5652:1979, IEC 60565:1977,IEC 60565A:1980 BS 5652:1979, IEC 60565:1977,IEC 60565A:1980. Specification for the calibration of hydrophones
BS 5653:1978, IEC 60500:1974 BS 5653:1978, IEC 60500:1974. Specification for hydrophones for calibration purposes
BS 5677:1979, IEC 60327:1971 BS 5677:1979, IEC 60327:1971. Method (precision) for pressure calibration of one-inch standard condenser microphones by the reciprocity technique
BS 5679:1979, IEC 60486:1974 BS 5679:1979, IEC 60486:1974. Method (precision) for free-field calibration of one-inch standard condenser microphones by the reciprocity technique
BS 5877:1980 BS 5877:1980. Guide for subjective listening tests for sound radio receivers
BS 5941:1980, IEC 60655:1979 BS 5941:1980, IEC 60655:1979. Specification for values for the difference between free-field and pressure sensitivity levels for one-inch standard condenser microphones
BS 5942-1:1980, IEC 60581-1:1977 BS 5942-1:1980, IEC 60581-1:1977. High fidelity audio equipment and systems; minimum performance requirements. Specification for general requirements
BS 5942-3:1980, IEC 60581-3:1979 BS 5942-3:1980, IEC 60581-3:1979. High fidelity audio equipment and systems; minimum performance requirements. Specification for record playing equipment and cartridge
BS 5942-4:1981, IEC 60581-4:1979 BS 5942-4:1981, IEC 60581-4:1979. High fidelity audio equipment and systems; minimum performance requirements. Specification for magnetic recording and reproducing equ
BS 5942-5:1983, IEC 60581-5:1981 BS 5942-5:1983, IEC 60581-5:1981. High fidelity audio equipment and systems; minimum performance requirements. Specification for microphones
BS 5942:Part 6:1980, IEC 60581-6:1979 BS 5942:Part 6:1980, IEC 60581-6:1979. High fidelity audio equipment and systems; minimum performance requirements. Specification for amplifiers
BS 6111:1981, IEC 60126:1973 BS 6111:1981, IEC 60126:1973. Specification for reference coupler for the measurement of hearing aids using earphones coupled to the ear by means of ear inserts
BS 6418:1983, IEC 60764:1983 BS 6418:1983, IEC 60764:1983. Specification for cordless audio transmission devices using infra-red radiation
BS 448-2:1981 BS 448-2:1981. Dimensions of electronic tubes and valves. Specification for dimensions of United Kingdom electronic tubes
BS 4319-1:1968 BS 4319-1:1968. Methods of measurement of the electrical properties of electronic tubes and valves (excluding microwave devices). Essential conditions for measuring equivalent input and
BS 4478:1969 BS 4478:1969. Methods of measurement of intermodulation products in electronic tubes or valves intended for use in colour television transposers
BS 4789:1972 BS 4789:1972. Specification for ceramic components for use in envelopes for electronic tubes
CP 1005:1962 CP 1005:1962. The use of electronic valves
BS 3041-1:1977, IEC 60169-1:1965 BS 3041-1:1977, IEC 60169-1:1965. Radio-frequency connectors. Specification for general requirements and measuring methods
BS 3041-2:1977, IEC 60169-2:1965 BS 3041-2:1977, IEC 60169-2:1965. Radio-frequency connectors. Specification for coaxial unmatched connector
BS 3041-12:1981, IEC 60169-12:1979 BS 3041-12:1981, IEC 60169-12:1979. Radio-frequency connectors. Specification for r.f. coaxial connectors with screw coupling, unmatched (type UHF)
BS 4054:Part 1:1980, IEC 60315-1:1970 BS 4054:Part 1:1980, IEC 60315-1:1970. Methods of measuring and expressing the performance of radio receivers for sound broadcasting. General conditions
BS 4054:Part 2:1980 BS 4054:Part 2:1980. Methods of measuring and expressing the performance of radio receivers for sound broadcasting. Measurements related to the audio-frequency part of the receiver
BS 4054:Part 3:1980, IEC 60315-3:1973 BS 4054:Part 3:1980, IEC 60315-3:1973. Methods of measuring and expressing the performance of radio receivers for sound broadcasting. Radio-frequency measurements
BS 4054-5:1980, IEC 60315-5:1971 BS 4054-5:1980, IEC 60315-5:1971. Methods of measuring and expressing the performance of radio receivers for sound broadcasting. Measurement on frequency-modulated rec
BS 4967:1983, IEC 60347:1982 BS 4967:1983, IEC 60347:1982. Specification for transverse track video tape recorders
BS 5069-1:1980, IEC 60122-3:1977,IEC 60122-3A:1979 BS 5069-1:1980, IEC 60122-3:1977,IEC 60122-3A:1979. Dimensions of piezoelectric devices. Specification for standard outlines and pin connections for
BS 5069-2:1983, IEC 60368-3:1979,IEC 60368-3A:1981 BS 5069-2:1983, IEC 60368-3:1979,IEC 60368-3A:1981. Dimensions of piezoelectric devices. Specification for standard outlines for piezoelectric filter
BS 5640-1:1978, IEC 60597-1:1977 BS 5640-1:1978, IEC 60597-1:1977. Aerials for the reception of sound and television broadcasting in the frequency range 30 MHz to 1 GHz. Specification for electrical a
BS 5640-2:1978, IEC 60597-2:1977 BS 5640-2:1978, IEC 60597-2:1977. Aerials for the reception of sound and television broadcasting in the frequency range 30 MHz to 1 GHz. Methods of measurement of elec
BS 5817-1:1980, IEC 60574-1:1977 BS 5817-1:1980, IEC 60574-1:1977. Specification for audiovisual, video and television equipment and systems. General
BS 5817:Part 2:1980, IEC 60574-2:1977 BS 5817:Part 2:1980, IEC 60574-2:1977. Specification for audiovisual, video and television equipment and systems. Definitions
BS 5817-5.1:1981, IEC 60574-5:1980 BS 5817-5.1:1981, IEC 60574-5:1980. Specification for audio-visual, video and television equipment and systems. Control, synchronization and address codes. Synchroni
BS 5817-5.2:1984, IEC 60574-5-2:1983 BS 5817-5.2:1984, IEC 60574-5-2:1983. Audio-visual, video and television equipment and systems. Control, synchronization and address codes. Method of operation for
BS 5819:1980, IEC 60608:1977 BS 5819:1980, IEC 60608:1977. Specification for interconnections between video-tape recorders and television receivers for 50 Hz, 625 lines systems
BS 5876:1980 BS 5876:1980. Guide for subjective viewing tests for television receivers
BS 6160-2:1981, IEC 60489-2:1978 BS 6160-2:1981, IEC 60489-2:1978. Radio equipment used in mobile services. Transmitters employing A3 or F3 emissions
BS 6160-4:1981, IEC 60489-4:1980 BS 6160-4:1981, IEC 60489-4:1980. Radio equipment used in mobile services. Transmitters employing single-sideband emissions (A3A, A3H or A3J)
BS 6311:1982, IEC 60698:1981 BS 6311:1982, IEC 60698:1981. Methods for measuring television tape machine parameters
BS 6370:1983, IEC 60712:1982 BS 6370:1983, IEC 60712:1982. Specification for helical-scan video-tape cassette system using 19 mm (? in) magnetic tape, known as U-format
BS 6415:1983, IEC 60752:1982 BS 6415:1983, IEC 60752:1982. Specification for audio-frequency calibration tape for transverse track video recorders
BS 6502:1984, IEC 60767:1983 BS 6502:1984, IEC 60767:1983. Specification for helical-scan video tape cassette system using 12.65 mm (0.5 in) magnetic tape on type Beta format
BS 6493-1.2:1984, IEC 60747-2:1983 BS 6493-1.2:1984, IEC 60747-2:1983. Semiconductor devices. Discrete devices. Recommendations for rectifier diodes
BS 6493-1.6:1984, IEC 60747-6:1983 BS 6493-1.6:1984, IEC 60747-6:1983. Semiconductor devices. Discrete devices. Recommendations for thyristors
BS 6312:1982 BS 6312:1982. Specification for plugs for use with British Telecommunications line jack units
BS 6312:1985 BS 6312:1985. Specification for plugs for use with British Telecommunications line jack units
BS 6317:1982 BS 6317:1982. Specification for simple telephones for connection to public switched telephone networks run by certain public telecommunication operators
BS 6328-3:1983 BS 6328-3:1983. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to direct current circuits
BS 6328-5:1984 BS 6328-5:1984. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to wideband (FDM) circuits
BS 6403:1983 BS 6403:1983. Specification for simple telex terminals using single channel voice frequency signalling for connection to British Telecommunications telex network
BS 6789-1:1984 BS 6789-1:1984. Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Specification fo
BS 6789-2:1984 BS 6789-2:1984. Apparatus with one or more particular functions for connection to public switched telephone networks run by certain public telecommunications operators. Specification fo
BS 6789-3.1:1985 BS 6789-3.1:1985. Apparatus with one or more particular functions for connection to the British Telecommunications public switched telephone network. Apparatus with auto-calling, auto
BS 6191-1:1981, ISO 5138/4-1981 BS 6191-1:1981, ISO 5138/4-1981. Mail processing machines. Glossary of terms for letter opening machines
BS 6191-2:1981, ISO 5138/5-1981 BS 6191-2:1981, ISO 5138/5-1981. Mail processing machines. Glossary of terms for letter folding machines
BS 6191-3:1982, ISO 5138/3-1981 BS 6191-3:1982, ISO 5138/3-1981. Mail processing machines. Glossary of terms for addressing machines
BS 6191-4:1984, ISO 4232/3-1984 BS 6191-4:1984, ISO 4232/3-1984. Mail processing machines. Specification for minimum information to be included in specification sheets of postal franking machines
BS 5729-5:1980 BS 5729-5:1980. Guide to stock control. Storekeeping
BS 6046:Part 1:1984 BS 6046:Part 1:1984. Use of network techniques in project management. Guide to the use of management, planning, review and reporting procedures
BS 1523-1:1967 BS 1523-1:1967. Glossary of terms used in automatic controlling and regulating systems. Process and kinetic control
BS 4462:1969 BS 4462:1969. Guide for the preparation of technical sales literature for measuring instruments and process control equipment
BS 4509:1985, IEC 60770:1984 BS 4509:1985, IEC 60770:1984. Methods for evaluating the performance of transmitters for use in industrial-process control systems
BS 5863-1:1984, IEC 60381-1:1982 BS 5863-1:1984, IEC 60381-1:1982. Analogue signals for process control systems. Specification for direct current signals
BS 5863-2:1980, IEC 60381-2:1978 BS 5863-2:1980, IEC 60381-2:1978. Analogue signals for process control systems. Specification for direct voltage signals
BS 3455:1973 BS 3455:1973. Glossary of terms used in nuclear science and technology
BS 3598:1970 BS 3598:1970. Recommendations for criticality safety in handling and processing fissile materials
BS 3775:1964 BS 3775:1964. Specification for counting trays (planchets) for radioactive assay
BS 4877:1972 BS 4877:1972. Recommendations for general principles of nuclear reactor instrumentation
BS 5210:1975, IEC 60412:1973 BS 5210:1975, IEC 60412:1973. Specification for standard dimensions of scintillators
BS 5251:1975, IEC 60323:1970 BS 5251:1975, IEC 60323:1970. Specification for analogue voltage ranges and logic levels for mains operated nuclear instruments
BS 5541:1978, IEC 60582:1977 BS 5541:1978, IEC 60582:1977. Specification for dimensions of vials for liquid scintillation counting
BS 5548:1978, IEC 60515:1975 BS 5548:1978, IEC 60515:1975. Specification for radiation detectors for the instrumentation and protection of nuclear reactors: characteristics and test methods
BS 5549:1978, IEC 60547:1976 BS 5549:1978, IEC 60547:1976. Specification for modular plug-in unit and standard 19-inch rack mounting unit based on NIM standard (for electronic nuclear instruments)
BS 5552:1978, IEC 60568:1977 BS 5552:1978, IEC 60568:1977. Code of practice for in-core instrumentation for neutron fluence rate (flux) measurements in power reactors
BS 5566:1978, IEC 60532:1976 BS 5566:1978, IEC 60532:1976. Recommendations for installed exposure rate meters, warning assemblies and monitors for X or gamma radiation of energy between 80 keV and 3 M
BS 5869:1980, ISO 4037-1979 BS 5869:1980, ISO 4037-1979. Specification for X and γ reference radiations for calibrating dosemeters and dose ratemeters and for determining their response as a function
BS 5915:1980, IEC 60600:1979 BS 5915:1980, IEC 60600:1979. Specification for equipment for minehead assay and sorting radioactive ores in containers
BS 6078:1981, IEC 60643:1979 BS 6078:1981, IEC 60643:1979. Guide to the application of digital computers to nuclear reactor instrumentation and control
BS 5688-2:1979, ISO 1915:1972 BS 5688-2:1979, ISO 1915:1972. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium
BS M 22:1949 BS M 22:1949. Specification for silica gel acid activated for aircraft purposes
BS M 24:1955 BS M 24:1955. Graphical symbols for aircraft hydraulic and pneumatic systems
BS M 32:1969 BS M 32:1969. Specification for dimensions of aircraft accessory drives and mounting pads
BS M 36:1970 BS M 36:1970. Method for ultrasonic testing of special forgings by an immersion technique using flat-bottomed holes as a reference standard
BS M 38:1971 BS M 38:1971. Guide to compilation of instructions and reports for the in-service non-destructive testing of aerospace products
BS M 39:1972 BS M 39:1972. Method for penetrant inspection of aerospace materials and components
BS M 40:1972 BS M 40:1972. Methods for measuring coating thickness by non-destructive testing
BS 2M 41:1977, ISO 482-1977 BS 2M 41:1977, ISO 482-1977. Methods of numbering propulsion units and components and describing their direction of rotation
BS M 42:1972 BS M 42:1972. Methods for non-destructive testing of fusion and resistance welds in thin gauge materials
BS M 43:1973 BS M 43:1973. Methods of zoning aircraft and referencing access doors and panels
BS M 44:1974 BS M 44:1974. Specification for identification of aircraft servicing, maintenance, ground handling and safety/hazard points
BS M 48:1975 BS M 48:1975. Specification for dimensions of elastomeric toroidal sealing rings for aerospace use - inch series
BS M 53:1983, ISO 6773-1982 BS M 53:1983, ISO 6773-1982. Method for thermal shock testing of pipes and fittings for aerospace fluid systems
BS M 55:1984, ISO 7257-1983 BS M 55:1984, ISO 7257-1983. Method for rotary flexure testing of hydraulic tubing joints and fittings for aerospace use
BS M 56:1985, ISO 7258:1984 BS M 56:1985, ISO 7258:1984. Methods for determination of density and relative density of polytetrafluoroethylene (PTFE) tubing for aerospace applications
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
