BIS Standards Catalogue
BS 4258-12:1982, ISO 4285-1977 BS 4258-12:1982, ISO 4285-1977. Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Guide to sampling techniques
BS 4400:1969 BS 4400:1969. Method for sodium chloride particulate test for respirator filters
BS 4524:1983, ISO 759-1981 BS 4524:1983, ISO 759-1981. Method for determination of residue on evaporation on a water bath
BS 4603:1970 BS 4603:1970. Method for determination of residue on ignition or ash of chemical products
BS 4633 and 4634:1970 BS 4633 and 4634:1970. Method for the determination of crystallizing point. Method for the determination of melting point and/or melting range
BS 4890:1973 BS 4890:1973. Test methods for mechanical joints in conveyor belting
BS 3619:1976 BS 3619:1976. Specification. Mobile infusion stands
BS 3985:1978 BS 3985:1978. Specification for cyanmethaemoglobin (haemiglobincyanide) solution for photometric haemoglobinometry
BS 4272-1:1968 BS 4272-1:1968. Anaesthetic and analgesic machines. Anaesthetic machines of the on-demand type supplied with nitrous oxide and oxygen from separate containers
BS 4272:Part 2:1968 BS 4272:Part 2:1968. Anaesthetic and analgesic machines. Analgesic machines of the on-demand type supplied with pre-mixed nitrous oxide-oxygen from a single container
BS 4316:1968 BS 4316:1968. Specification for apparatus for measurement of packed red cell volume
BS 4376:1982 BS 4376:1982. Specification for electrically operated blood storage refrigerators
BS 5181:1975 BS 5181:1975. Specification for wooden walking sticks
BS 5213:1975 BS 5213:1975. Specification for medical specimen containers for microbiology
BS 5473:1977 BS 5473:1977. Specification for spinal and abdominal fabric supports
BS 5568:1978 BS 5568:1978. Specification for folding wheelchairs for adults
BS 5682:1984 BS 5682:1984. Specification for terminal units, hose assemblies and their connectors for use with medical gas pipeline systems
BS 6015:1980, ISO 4135-1979 BS 6015:1980, ISO 4135-1979. Glossary of terms used in anaesthesiology
BS 5736:Part 3:1981 BS 5736:Part 3:1981. Evaluation of medical devices for biological hazards. Method of test for systemic toxicity; assessment of acute toxicity of extracts from medical devices
BS 5736-4:1981 BS 5736-4:1981. Evaluation of medical devices for biological hazards. Method of test for intracutaneous reactivity of extracts from medical devices
BS 5736:Part 5:1982 BS 5736:Part 5:1982. Evaluation of medical devices for biological hazards. Method of test for systemic toxicity; assessment of pyrogenicity in rabbits of extracts from medical devi
BS 5736:Part 6:1983 BS 5736:Part 6:1983. Evaluation of medical devices for biological hazards. Methods of test for sensitization; assessment of the potential of medical devices to produce delayed cont
BS 5736:Part 7:1983 BS 5736:Part 7:1983. Evaluation of medical devices for biological hazards. Method of test for skin irritation of extracts from medical devices
BS 5736:Part 8:1984 BS 5736:Part 8:1984. Evaluation of medical devices for biological hazards. Method of test for skin irritation of solid medical devices
BS 5943:1980 BS 5943:1980. Methods for measurement and recording for orthopaedic footwear
BS 3162:1959 BS 3162:1959. Specification for ophthalmic trial case lenses
BS 3668:1963 BS 3668:1963. Specification for red and green filters used in ophthalmic dichromatic and dissociation tests
BS 4230:1967 BS 4230:1967. Specification for metal collapsible tubes for eye ointment
BS 5043:1973 BS 5043:1973. Specification for book holders and prismatic spectacles for use as reading aids in hospitals and the home
BS 6125:1981 BS 6125:1981. Specification for natural fibre cords, lines and twines
BS 1214:1977 BS 1214:1977. Specification for hessian sandbags and rot-proofed hessian sandbags
BS 4256-2:1972 BS 4256-2:1972. Specification for oil-burning air heaters. Fixed, flued, fan-assisted heaters
BS 3810-1:1964 BS 3810-1:1964. Glossary of terms used in materials handling. Terms used in connection with pallets, stillages, hand and powered trucks
BS 3810-2:1965 BS 3810-2:1965. Glossary of terms used in materials handling. Terms used in connection with conveyors and elevators (excluding pneumatic and hydraulic handling)
BS 3810-3:1967 BS 3810-3:1967. Glossary of terms used in materials handling. Terms used in connection with pneumatic and hydraulic handling
BS 3810-4:1968 BS 3810-4:1968. Glossary of terms used in materials handling. Terms used in connection with cranes
BS 3810-5:1971 BS 3810-5:1971. Glossary of terms used in materials handling. Terms used in connection with lifting tackle
BS 3810-6:1973 BS 3810-6:1973. Glossary of terms used in materials handling. Terms used in connection with pulley blocks
BS 3810-7:1973 BS 3810-7:1973. Glossary of terms used in materials handling. Terms used in connection with aerial ropeways and cableways
BS 3810-8:1975 BS 3810-8:1975. Glossary of terms used in materials handling. Terms used in connection with lifts, lifting platforms and inclined haulages
BS 3810-9:1975 BS 3810-9:1975. Glossary of terms used in materials handling. Terms used in connection with rail transport
BS 327:1964 BS 327:1964. Specification for power-driven derrick cranes
BS 357:1958 BS 357:1958. Specification for power-driven travelling jib cranes (rail-mounted low carriage type)
BS 2452:1954 BS 2452:1954. Specification for electrically driven jib cranes mounted on a high pedestal or portal carriage (high pedestal or portal jib cranes)
BS 2573-1:1983 BS 2573-1:1983. Rules for the design of cranes. Specification for classification, stress calculations and design criteria for structures
BS 2573-2:1980 BS 2573-2:1980. Rules for the design of cranes. Specification for classification, stress calculations and design of mechanisms
BS 2799:1974 BS 2799:1974. Specification for power-driven tower cranes for building and engineering construction
BS 2853:1957 BS 2853:1957. Specification for the design and testing of steel overhead runway beams
BS 5744:1979 BS 5744:1979. Code of practice for safe use of cranes (overhead/underhung travelling and goliath cranes, high pedestal and portal jib dockside cranes, manually-operated and light cranes,
BS 3125:1959 BS 3125:1959. Specification for power-driven mast hoists for materials
BS 3701:1964 BS 3701:1964. Specification for hand operated plate sided winches
BS 4898:1973 BS 4898:1973. Specification for chain lever hoists
BS 5323:1980 BS 5323:1980. Code of practice for scissor lifts
BS 1290:1983 BS 1290:1983. Specification for wire rope slings and sling legs for general lifting purposes
BS 1663:1950 BS 1663:1950. Specification for higher tensile steel chain Grade 40 (short link and pitched or calibrated) for lifting purposes
BS 1692:1971 BS 1692:1971. Specification for gin blocks
BS 2902:1957 BS 2902:1957. Specification. Higher tensile steel chain slings and rings, links alternative to rings, egg links and intermediate links
BS 2903:1980 BS 2903:1980. Specification for higher tensile steel hooks for chains, slings, blocks and general engineering purposes
BS 3017:1958 BS 3017:1958. Specification for mild steel forged ramshorn hooks
BS 3113:1959 BS 3113:1959. Specification for alloy steel chain, Grade 60. Short link, for lifting purposes
BS 3114:1959 BS 3114:1959. Specification for alloy steel chain, Grade 80. Polished short link calibrated load chain for pulley blocks
BS 3458:1962 BS 3458:1962. Specification for alloy steel chain slings
BS 3481-3:1974 BS 3481-3:1974. Flat lifting slings. Disposable flat lifting slings
BS 3551:1962 BS 3551:1962. Specification for alloy steel shackles
BS 4018:1966 BS 4018:1966. Specification for pulley blocks for use with wire rope for a maximum lift of 25 tonf in combination
BS 4278:1984 BS 4278:1984. Specification for eyebolts for lifting purposes
BS 4344:1968 BS 4344:1968. Pulley blocks for use with natural and synthetic fibre ropes
BS 4536:1970 BS 4536:1970. Specification for heavy duty pulley blocks for use with wire rope
BS 4942:Part 1:1981, ISO 1834:1980 BS 4942:Part 1:1981, ISO 1834:1980. Short link chain for lifting purposes. Specification for general conditions of acceptance
BS 4942-2:1981, ISO 1835:1980 BS 4942-2:1981, ISO 1835:1980. Short link chain for lifting purposes. Specification for grade M (4) non-calibrated chain
BS 4942-3:1981, ISO 1836:1980 BS 4942-3:1981, ISO 1836:1980. Short link chain for lifting purposes. Specification for grade M (4) calibrated chain
BS 4942-4:1981, ISO 3075:1980 BS 4942-4:1981, ISO 3075:1980. Short link chain for lifting purposes. Specification for grade S (6) non-calibrated chain
BS 4942-5:1981, ISO 3076:1984 BS 4942-5:1981, ISO 3076:1984. Short link chain for lifting purposes. Specification for grade T (8) non-calibrated chain
BS 5709:1979 BS 5709:1979. Specification for stiles, bridle gates and kissing gates
BS 1562-2:1973 BS 1562-2:1973. Specification for agricultural mower and combine-harvester parts. Metric units
BS 2468:1963 BS 2468:1963. Glossary of terms relating to agricultural machinery and implements
BS 3486:Part 1:1962 BS 3486:Part 1:1962. Specification for wheels for agricultural machinery, implements and trailers. Wheel and hub centre dimensions. Metric and inch units
BS 3486:Part 2:1970 BS 3486:Part 2:1970. Specification for wheels for agricultural machinery, implements and trailers. Tyre and rim sizes
BS 3486:Part 3:1970 BS 3486:Part 3:1970. Specification for wheels for agricultural machinery, implements and trailers. Nuts
BS 3733:1974 BS 3733:1974. Specification for endless V-belt drives for agricultural purposes
BS 4026:Part 3:1969 BS 4026:Part 3:1969. Specification for rod and links for root machinery. Potato elevator diggers and main elevators on complete potato harvesters: metric units
BS 4026:Part 4:1969 BS 4026:Part 4:1969. Specification for rod and links for root machinery. Carrot and sugar beet harvesters: metric units
BS 4220-1:1974 BS 4220-1:1974. Methods of test for seats on agricultural wheeled tractors. Tests on artificial track
BS 4394:1969 BS 4394:1969. Specification for topping knives for sugar beet harvesters. Metric units
BS 4409-3:1982, ISO 7119-1981 BS 4409-3:1982, ISO 7119-1981. Screw conveyors. Method for calculating drive power
BS 5107:1974 BS 5107:1974. Specification for powered lawnmowers
BS 5137:1974 BS 5137:1974. Specification for requirements for the compatible operation of forage harvesting machinery
BS 5389:1976, ISO 3737-1976 BS 5389:1976, ISO 3737-1976. Method of test for enclosure pressurization systems on agricultural tractors and self-propelled machines
BS 5822:1979, ISO 5679-1979 BS 5822:1979, ISO 5679-1979. Specification for agricultural discs: classification, main fixing dimensions and general requirements
BS 5891:1980 BS 5891:1980. Specification for ring-type hitches on agricultural trailers and towed implements
BS 6139:1981 BS 6139:1981. Specification for drawbars and towing hooks on agricultural tractors
BS 6142:1981 BS 6142:1981. Specification for presentation of technical data on hydraulic systems of agricultural tractors and machinery
BS 4317-1:1980, ISO 520-1977 BS 4317-1:1980, ISO 520-1977. Methods of test for cereals and pulses. Determination of the mass of 1000 grains
BS 4317-9:1982, ISO 3093-1982 BS 4317-9:1982, ISO 3093-1982. Methods of test for cereals and pulses. Determination of falling number of cereals
BS 4317-11:1976, ISO 2164-1975 BS 4317-11:1976, ISO 2164-1975. Methods of test for cereals and pulses. Determination of glycosidic hydrocyanic acid in pulses
BS 4317-12:1980, ISO 5531-1978 BS 4317-12:1980, ISO 5531-1978. Methods of test for cereals and pulses. Determination of wet gluten in wheat flour
BS 4317:Part 14:1980, ISO 3983-1977 BS 4317:Part 14:1980, ISO 3983-1977. Methods of test for cereals and pulses. Determination of alpha-amylase activity in cereals and cereal products (colorimetric me
BS 4317-15:1981, ISO 6540-1980 BS 4317-15:1981, ISO 6540-1980. Methods of test for cereals and pulses. Determination of moisture content of maize (milled and whole)
BS 4317-16:1981, ISO 6645-1981 BS 4317-16:1981, ISO 6645-1981. Methods of test for cereals and pulses. Determination of dry gluten in wheat flour
BS 4510:1980, ISO 950-1979 BS 4510:1980, ISO 950-1979. Methods for sampling cereals (as grain)
BS 4511:1980, ISO 951-1979 BS 4511:1980, ISO 951-1979. Methods for sampling pulses (in bags)
BS 5333:1981, ISO 2170-1980 BS 5333:1981, ISO 2170-1980. Methods for sampling cereals and pulses (as milled products)
BS 5939:1980, ISO 5527/1-1979 BS 5939:1980, ISO 5527/1-1979. Glossary of terms for cereals and cereal products
BS 6279:Part 1:1982, ISO 6322/1-1981 BS 6279:Part 1:1982, ISO 6322/1-1981. Storage of cereals and pulses. Guide to particular problems encountered in the storage of cereals and pulses
BS 6279-2:1982, ISO 6322/2-1981 BS 6279-2:1982, ISO 6322/2-1981. Storage of cereals and pulses. Code of practice for the storage of cereals and pulses
BS 3019-1:1984 BS 3019-1:1984. TIG welding. Specification for TIG welding of aluminium, magnesium and their alloys
BS 3936-4:1984 BS 3936-4:1984. Nursery stock. Specification for forest trees
BS 3936-11:1984 BS 3936-11:1984. Nursery stock. Specification for container-grown culinary herbs
BS 84:1956 BS 84:1956. Specification for parallel screw threads of Whitworth form
BS 4876:1984 BS 4876:1984. Specification for performance requirements for domestic flued oil burning appliances (including test procedures)
BS 5910:Part 1:1980, ISO 4211-1979 BS 5910:Part 1:1980, ISO 4211-1979. Methods of test for surface finishes for furniture. Assessment of surface resistance to cold liquids
BS 3705:1972 BS 3705:1972. Recommendations for provision of space for domestic kitchen equipment
BS 1206:1974 BS 1206:1974. Specification for fireclay sinks: dimensions and workmanship
BS 1244-1:1956 BS 1244-1:1956. Metal sinks for domestic purposes. Imperial units with metric equivalents
BS 3380:1982 BS 3380:1982. Specification for wastes (excluding skeleton sink wastes) and bath overflows
BS 3402:1969 BS 3402:1969. Specification for quality of vitreous china sanitary appliances
BS 4086:1966 BS 4086:1966. Recommendations for maximum surface temperatures of heated domestic equipment
BS 1846-1:1994 BS 1846-1:1994. Glossary of terms relating to solid fuel burning equipment. Domestic appliances
BS 1846-2:1968 BS 1846-2:1968. Glossary of terms relating to solid fuel burning equipment. Industrial water heating and steam raising installations
PD 6434:1969 PD 6434:1969. Recommendations for the design and testing of smoke reducing solid fuel burning domestic appliances
BS 3300:1974 BS 3300:1974. Specification for kerosine (paraffin) unflued space heaters, cooking and boiling appliances for domestic use
BS 5386:Part 1:1976, EN 26:1977 BS 5386:Part 1:1976, EN 26:1977. Specification for gas burning appliances. Gas burning appliances for instantaneous production of hot water for domestic use
BS 5386:Part 2:1981 BS 5386:Part 2:1981. Specification for gas burning appliances. Mini water heaters (2nd and 3rd family gases)
BS 5386-3:1980 BS 5386-3:1980. Specification for gas burning appliances. Domestic cooking appliances burning gas
BS 6350:1983 BS 6350:1983. Specification for gas heated fish and chip frying ranges
BS 5643:1984 BS 5643:1984. Glossary of refrigeration, heating, ventilating and air-conditioning terms
BS 6340-1:1983 BS 6340-1:1983. Shower units. Guide on choice of shower units and their components for use in private dwellings
BS 6340-2:1983 BS 6340-2:1983. Shower units. Specification for the installation of shower units
BS 6340-4:1984 BS 6340-4:1984. Shower units. Specification for shower heads and related equipment
BS 6340-5:1983 BS 6340-5:1983. Shower units. Specification for prefabricated shower trays made from acrylic material
BS 6340-6:1983 BS 6340-6:1983. Shower units. Specification for prefabricated shower trays made from porcelain enamelled cast iron
BS 6340-7:1983 BS 6340-7:1983. Shower units. Specification for prefabricated shower trays made from vitreous enamelled sheet steel
BS 1188:1974 BS 1188:1974. Specification for ceramic wash basins and pedestals
BS 1329:1974 BS 1329:1974. Specification for metal hand rinse basins
BS 5506:Part 1:1977, EN 31:1977 BS 5506:Part 1:1977, EN 31:1977. Specification for wash basins. Pedestal wash basins. Connecting dimensions
BS 5506-3:1977 BS 5506-3:1977. Specification for wash basins. Wash basins (one or three tap holes). Materials, quality, design and construction
BS 5505-1:1977, EN 35:1977 BS 5505-1:1977, EN 35:1977. Specification for bidets. Pedestal bidets over rim supply only. Connecting dimensions
BS 5505:Part 2:1977, EN 36:1977 BS 5505:Part 2:1977, EN 36:1977. Specification for bidets. Wall hung bidets over rim supply only. Connecting dimensions
BS 5505-3:1977 BS 5505-3:1977. Specification for bidets. Vitreous china bidets over rim supply only. Quality, workmanship and functional dimensions other than connecting dimensions.
BS 1254:1981 BS 1254:1981. Specification for WC seats (plastics)
BS 5503:Part 1:1977 BS 5503:Part 1:1977. Vitreous china washdown WC pans with horizontal outlet. Connecting dimensions
BS 5503-2:1977 BS 5503-2:1977. Vitreous china washdown WC pans with horizontal outlet. Materials, quality, performance and dimensions other than connecting dimensions
BS 5504-1:1977, EN 34:1992 BS 5504-1:1977, EN 34:1992. Wall hung WC pan. Wall hung WC pan with close coupled cistern. Connecting dimensions
BS 5504-2:1977, EN 38:1992 BS 5504-2:1977, EN 38:1992. Wall hung WC pan. Wall hung WC pan with independent water supply. Connecting dimensions
BS 5504-3:1977 BS 5504-3:1977. Wall hung WC pan. Wall hung WC pan. Materials, quality and functional dimensions other than connecting dimensions
BS 5627:1984 BS 5627:1984. Specification for plastics connectors for use with horizontal outlet vitreous china WC pans
BS 2081:Part 1:1980 BS 2081:Part 1:1980. Closets for use with chemicals. Specification for portable and transportable types
BS 2081:Part 2:1981 BS 2081:Part 2:1981. Closets for use with chemicals. Specification for permanent installations
BS 4880-1:1973 BS 4880-1:1973. Specification for urinals. Stainless steel slab urinals
BS 5520:1977 BS 5520:1977. Specification for vitreous china bowl urinals (rimless type)
BS 5579:1978 BS 5579:1978. Specification for standard reference conditions for measurement of petroleum liquids and gases
BS 5598-1:1978, ISO 2209-1973 BS 5598-1:1978, ISO 2209-1973. Methods of sampling and test for halogenated hydrocarbons. Sampling of liquid products
BS 5598-2:1979, ISO 3427-1976 BS 5598-2:1979, ISO 3427-1976. Methods of sampling and test for halogenated hydrocarbons. Sampling of liquefied gases
BS 5598-3:1979, ISO 2210-1972 BS 5598-3:1979, ISO 2210-1972. Methods of sampling and test for halogenated hydrocarbons. Determination of residue on evaporation
BS 5598-4:1979, ISO 1393-1977 BS 5598-4:1979, ISO 1393-1977. Methods of sampling and test for halogenated hydrocarbons. Determination of acidity, titrimetric method
BS 5598-5:1979, ISO 1394-1977 BS 5598-5:1979, ISO 1394-1977. Methods of sampling and test for halogenated hydrocarbons. Determination of cloud point
BS 5598-6:1979, ISO 3363-1976 BS 5598-6:1979, ISO 3363-1976. Methods of sampling and test for halogenated hydrocarbons. Determination of acidity of fluorochlorinated hydrocarbons
BS 5598-7:1980, ISO 5787-1979 BS 5598-7:1980, ISO 5787-1979. Methods of sampling and test for halogenated hydrocarbons. Methods of test for methyl chloride and ethyl chloride
BS 5598-9:1981, ISO 5917-1980 BS 5598-9:1981, ISO 5917-1980. Methods of sampling and test for halogenated hydrocarbons. Determination of boiling range of chlorofluorinated hydrocarbons
BS 5598-10:1983, ISO 5916-1982 BS 5598-10:1983, ISO 5916-1982. Methods of sampling and test for halogenated hydrocarbons. Determination of impurities in methyl chloride, gas chromatographic method
BS 5598-11:1983, ISO 5918-1982 BS 5598-11:1983, ISO 5918-1982. Methods of sampling and test for halogenated hydrocarbons. Determination of 'inert' gas content of chlorofluorohydrocarbons, gas chromato
BS 5886:1980, ISO 4483-1979 BS 5886:1980, ISO 4483-1979. Methods for field pressure testing of asbestos-cement pipelines
BS 5914:1980, ISO 3530-1979 BS 5914:1980, ISO 3530-1979. Methods of calibrating leak-detectors of the mass-spectrometer-type used in the field of vacuum technology
BS 6169-1:1981, ISO 2714:1980 BS 6169-1:1981, ISO 2714:1980. Methods for volumetric measurement of liquid hydrocarbons. Displacement meter systems (other than dispensing pumps)
BS M 37:1970 BS M 37:1970. Method for the etch inspection of metallic materials and components
BS 1000[66/66.0]:1983 BS 1000[66/66.0]:1983. Universal Decimal Classification. English full edition. Chemical technology. Chemical engineering, production and processing, operations and plant
BS 3641-1:1971 BS 3641-1:1971. Symbols for machine tools. General symbols
BS 3641-2:1980 BS 3641-2:1980. Symbols for machine tools. Specification for numerical control symbols
BS 3641-3:1973 BS 3641-3:1973. Specification for symbols for machine tools. Additional general symbols
BS 122-1:1953 BS 122-1:1953. Specification for milling cutters and reamers. Milling cutters
BS 122-4:1980 BS 122-4:1980. Milling cutters. Screwed shank end mills and slot drills
BS 328-2:1972 BS 328-2:1972. Drills and reamers. Combined drills and countersinks (centre drills)
BS 328-3:1983 BS 328-3:1983. Drills and reamers. Specification for the dimensions of core drills
BS 328-4:1983 BS 328-4:1983. Drills and reamers. Specification for dimensions of reamers
BS 328-5:1983 BS 328-5:1983. Drills and reamers. Specification for the dimensions of countersinks and counterbores
BS 1157:1975 BS 1157:1975. Recommendations for tapping drill sizes for use with fluted taps
BS 1296-1:1970 BS 1296-1:1970. Specification for single point cutting tools. Shank sections
BS 1296-2:1972 BS 1296-2:1972. Specification for single point cutting tools. Nomenclature
BS 1296-3:1978 BS 1296-3:1978. Specification for single point cutting tools. Butt-welded cutting tools and blanks
BS 1296-4:1978 BS 1296-4:1978. Specification for single point cutting tools. Ground high speed steel tool bits
BS 2064-1:1976 BS 2064-1:1976. Diamond and products. Specification for diamond and cubic boron nitride abrasive grinding wheels
BS 2064-2:1976 BS 2064-2:1976. Diamond abrasive products. Specification for diamond abrasive circular saws and frame saws
BS 4193-9:1982, ISO 6262-1:1982 BS 4193-9:1982, ISO 6262-1:1982. Hardmetal insert tooling. Specification for end mills with indexable inserts and flatted parallel shank
BS 4193-10:1982, ISO 6262-2:1982 BS 4193-10:1982, ISO 6262-2:1982. Hardmetal insert tooling. Specification for end mills with indexable inserts and Morse taper shank
BS 4193-11:1983, ISO 6462-1983 BS 4193-11:1983, ISO 6462-1983. Hardmetal insert tooling. Specification for dimensions of face milling cutters with indexable inserts
BS 4193-12:1984, ISO 6986-1983 BS 4193-12:1984, ISO 6986-1983. Hardmetal insert tooling. Specification for dimensions of side and face milling and slotting cutters with indexable inserts
BS 4193:Part 13:1984, ISO 6987/1-1983 BS 4193:Part 13:1984, ISO 6987/1-1983. Hardmetal insert tooling. Specification for dimensions of indexable hardmetal inserts having 7° normal clearance, rounded c
BS 4193:Part 14:1984, ISO 6261-1984 BS 4193:Part 14:1984, ISO 6261-1984. Hardmetal insert tooling. Specification for designation of boring bars (tool holders with cylindrical shank) for indexable inse
BS 4390:1969 BS 4390:1969. Specification for portable pneumatic grinding machines
BS 5246:1976 BS 5246:1976. Specification for pinion type cutters for spur gears - 1 to 8 metric module
BS 5912:1980, ISO 4203-1978 BS 5912:1980, ISO 4203-1978. Specification for dimensions of driving tenons and sockets for parallel shank drills and machine reamers
BS 387:1979, ISO 2924:1973 BS 387:1979, ISO 2924:1973. Specification for interchangeability dimensions of the drive of solid and segmental circular saws for cold cutting of metals: saw diameter range
BS 411:1969 BS 411:1969. Specification for circular saws for woodworking and their attachment
BS 1089:1973 BS 1089:1973. Specification for workhead spindle noses for grinding machines: cylindrical external, internal and universal types
BS 1098-1:1967 BS 1098-1:1967. Specification for jig bushes. Inch units
BS 1759:1969 BS 1759:1969. Specification for knurling wheels
BS 1935:1972 BS 1935:1972. Specification for spindle noses and adjustable adaptors for multi-spindle heads
BS 1983-1:1969 BS 1983-1:1969. Specification for chucks for machine tools and portable power tools. Tool-holding chucks
BS 3766:1979 BS 3766:1979. Specification for coolant pumps for machine tools
BS 3884-1:1974 BS 3884-1:1974. Modular units for machine tools. Specification for basic units
BS 4727-1:Group 06:1973 BS 4727-1:Group 06:1973. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electroni
BS 4727:Part 3:Group 05:1971 BS 4727:Part 3:Group 05:1971. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to telecommunications and el
BS 4727-3:Group 06:1971 BS 4727-3:Group 06:1971. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to telecommunications and electronics.
BS 4727-3:Group 07:1971 BS 4727-3:Group 07:1971. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to telecommunications and electronics.
BS 4727:Part 3:Group 10:1979 BS 4727:Part 3:Group 10:1979. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to telecommunications and el
BS 4727-3:Group 11:1983 BS 4727-3:Group 11:1983. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to telecommunications and electronics.
BS 1344-5:1984, ISO 4533:1983 BS 1344-5:1984, ISO 4533:1983. Methods of testing vitreous enamel finishes. Determination of resistance to hot detergent solutions used for washing textiles
BS 1344:Part 15:1984, ISO 2734-1983 BS 1344:Part 15:1984, ISO 2734-1983. Methods of testing vitreous enamel finishes. Apparatus for testing with alkaline liquids
BS 5291:1984 BS 5291:1984. Specification for manufacture of finger joints of structural softwood
BS 5462:Part 1:1984 BS 5462:Part 1:1984. Footwear with midsole protection. Specification for lined vulcanized rubber footwear with penetration resistant midsoles
BS 5462:Part 2:1984 BS 5462:Part 2:1984. Footwear with midsole protection. Specification for lined or unlined polyvinyl chloride (PVC) footwear with penetration resistant midsoles
BS 5305:1984 BS 5305:1984. Code of practice for cleaning and disinfecting of plant and equipment used in the dairying industry
BS 1990-1:1984 BS 1990-1:1984. Wood poles for overhead power and telecommunication lines. Specification for softwood poles
BS 148:1984 BS 148:1984. Specification for unused mineral insulating oils for transformers and switchgear
BS 3788:1984 BS 3788:1984. Specification for tin coated finish on culinary utensils
BS 2606:1955 BS 2606:1955. Specification for X-ray protective gloves for medical diagnostic purposes up to 150 kV peak
BS 3043:1973 BS 3043:1973. Specification for storage envelopes for processed X-ray films for medical radiography
BS 3664:1963 BS 3664:1963. Specification for film badges for personnel radiation monitoring
BS 3783:1964 BS 3783:1964. Specification for X-ray lead-rubber protective aprons for personal use
BS 6090:1981, ISO 1757-1980 BS 6090:1981, ISO 1757-1980. Specification for personal photographic dosemeters
BS 6251:1982, IEC 60572:1977 BS 6251:1982, IEC 60572:1977. Method for determining the luminance distribution of electro-optical X-ray image intensifiers
BS 1781:1981 BS 1781:1981. Specification for linen and linen union textiles
BS 3878:1982 BS 3878:1982. Specification for flexible PVC sheeting for hospital use
BS 1000[159.9]:1969 BS 1000[159.9]:1969. Universal Decimal Classification. English full edition. Psychology
BS 1000[36]:1970 BS 1000[36]:1970. Universal Decimal Classification. English full edition. Social welfare and relief (excluding 368 Insurance)
BS 1000[6/611]:1968 BS 1000[6/611]:1968. Universal Decimal Classification. English full edition. Applied sciences in general. Anatomy.
BS 1000[612]:1968 BS 1000[612]:1968. Universal Decimal Classification. English full edition. Physiology
BS 1000[613]:1980 BS 1000[613]:1980. Universal Decimal Classification. English full edition. Hygiene generally. Personal health and hygiene
BS 1000[615]:1979 BS 1000[615]:1979. Universal Decimal Classification. English full edition. Pharmaceutics. Therapeutics. Toxicology
BS 1000[616]:1970 BS 1000[616]:1970. Universal Decimal Classification. English full edition. Pathology
BS 1000[617]:1968 BS 1000[617]:1968. Universal Decimal Classification. English full edition. Orthopaedics. Surgery. Ophthalmology
BS 1000[618]:1968 BS 1000[618]:1968. Universal Decimal Classification. English full edition. Gynaecology. Obstetrics
BS 1000[619]:1978 BS 1000[619]:1978. Universal Decimal Classification. English full edition. Veterinary science
BS 1000[628]:1982 BS 1000[628]:1982. Universal Decimal Classification. English full edition. Public health engineering. Water. Illuminating engineering
BS 946:1970 BS 946:1970. Method for the designation of yarns
BS 947:1970 BS 947:1970. Specification for a universal system for designating linear density of textiles (Tex system)
BS 1000[677]:1981 BS 1000[677]:1981. Universal Decimal Classification. English full edition. Textile industry
BS 2005:1966 BS 2005:1966. Glossary of terms for fillings for bedding, upholstery and other domestic articles
BS 4327:Part 1:1981 BS 4327:Part 1:1981. Glossary of terms relating to the winding of textile yarns. Basic terms for winding
BS 4327:Part 2:1982 BS 4327:Part 2:1982. Glossary of terms relating to the winding of textile yarns. Cone and cheese winding machines
BS 4392:Part 1:1978, ISO 92-1976 BS 4392:Part 1:1978, ISO 92-1976. Specification for textile machinery and accessories: definition of left and right sides. Spinning machinery
BS 4392:Part 2:1978, ISO 141-1976 BS 4392:Part 2:1978, ISO 141-1976. Specification for textile machinery and accessories: definition of left and right sides. Pirn winders and cross winders
BS 4392:Part 3:1978, ISO 142-1976 BS 4392:Part 3:1978, ISO 142-1976. Specification for textile machinery and accessories: definition of left and right sides. Weaving preparatory machines
BS 4392:Part 4:1978, ISO 108-1976 BS 4392:Part 4:1978, ISO 108-1976. Specification for textile machinery and accessories: definition of left and right sides. Weaving looms
BS 4392:Part 5:1978, ISO 1036:1976 BS 4392:Part 5:1978, ISO 1036:1976. Specification for textile machinery and accessories: definition of left and right sides. Dyeing and finishing machines
BS 4406:1969 BS 4406:1969. Specification for the designation in the Tex system of netting yarns for fishing nets
BS 4440:1974 BS 4440:1974. Glossary of basic terms for fishing nets
BS 4802:Part 2:1977, ISO 1586-1977 BS 4802:Part 2:1977, ISO 1586-1977. Specification for terminology and classification of weaving machinery. Textile machinery and accessories - shuttles - terms and d
BS 4802:Part 3:1978, ISO 5243-1977 BS 4802:Part 3:1978, ISO 5243-1977. Specification for terminology and classification of weaving machinery. Textile machinery and accessories: numbering of heald fram
BS 4815:1972 BS 4815:1972. Glossary of generic names for man-made fibres
BS 5399:1976, ISO 2544:1975 BS 5399:1976, ISO 2544:1975. Glossary of terms relating to textile machinery and accessories, warping machinery and the preparation of warp for weaving
BS 5523:1977, ISO 3572-1976 BS 5523:1977, ISO 3572-1976. Glossary of terms for textiles - weaves - definitions of general terms and basic weaves
BS 6131:1982 BS 6131:1982. Glossary of terms relating to household sewing machines
BS 950-1:1967 BS 950-1:1967. Specification for artificial daylight for the assessment of colour. Illuminant for colour matching and colour appraisal
BS 950-2:1967 BS 950-2:1967. Specification for artificial daylight for the assessment of colour. Viewing conditions for the graphic arts industry
BS 1931:1968 BS 1931:1968. Method for the determination of length of woven or knitted fabrics when relaxed at zero tension
BS 1955:1981 BS 1955:1981. Method for determination of dimensional changes of wool-containing fabrics during washing
BS 2010:1963 BS 2010:1963. Method for determination of the linear density of yarns from packages
BS 2016:1973 BS 2016:1973. Methods for the determination of the linear density of textile fibres: gravimetric methods
BS 2043:1968 BS 2043:1968. Method for the determination of wool fibre fineness by the use of a projection microscope
BS 2085:1973 BS 2085:1973. Method of test for determination of twist in yarns, direct counting method
BS 93:1951 BS 93:1951. Specification for British Association (B.A.) screw threads with tolerances for sizes 0 B.A. to 16 B.A.
BS 811:1950 BS 811:1950. Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads)
BS 919-1:1960 BS 919-1:1960. Specification for screw gauge limits and tolerances. Gauges for screw threads of Unified form
BS 919-2:1971 BS 919-2:1971. Specification for screw gauge limits and tolerances. Gauges for screw threads of Whitworth and BA forms
BS 919-3:1968 BS 919-3:1968. Specification for screw gauge limits and tolerances. Gauges for ISO metric screw threads
BS 919-4:1964 BS 919-4:1964. Specification for screw gauge limits and tolerances. Limits of size for gauges for screw threads of Unified form diameters ? in and larger
BS 1104:1957 BS 1104:1957. Specification for general purpose Acme screw threads
BS 1580:Parts 1 and 2:1962 BS 1580:Parts 1 and 2:1962. Specification for Unified screw threads. Diameters ? in and larger
BS 1580-3:1965 BS 1580-3:1965. Specification for Unified screw threads. Diameters below ? in
BS 1657:1950 BS 1657:1950. Specification for buttress threads
BS 1936-1:1952 BS 1936-1:1952. Undercuts and runouts for screw threads. Inch screw threads
BS 3580:1964 BS 3580:1964. Guide to design considerations on the strength of screw threads
BS 3643-1:1981 BS 3643-1:1981. ISO metric screw threads. Principles and basic data
BS 3643-2:1981 BS 3643-2:1981. ISO metric screw threads. Specification for selected limits of size
BS 4827:1972 BS 4827:1972. Specification for ISO miniature screw threads. Metric series
BS 5346:1976 BS 5346:1976. Specification. ISO metric trapezoidal screw threads
BS 5590:1978 BS 5590:1978. Specification for screw thread metric series measuring cylinders
PD 6494:1980 PD 6494:1980. Mismatch of screw thread systems
BS 5631:1978, EN 25353:1988,ISO 5353:1978 BS 5631:1978, EN 25353:1988,ISO 5353:1978. Specification for earth moving machinery and tractors and machinery for agriculture and forestry. Seat index point
BS 5768:1979, ISO 6011-1978 BS 5768:1979, ISO 6011-1978. Specification for operating instrumentation for earth-moving machinery
BS 6060:1981, ISO 6392-1980 BS 6060:1981, ISO 6392-1980. Specification for nipple-type lubrication fittings for earth-moving machinery
BS 6074:1981, ISO 6485-1980 BS 6074:1981, ISO 6485-1980. Method for determination of the volumetric rating of tractor-scrapers for earth-moving machinery
BS 6113:1981, ISO 6483-1980 BS 6113:1981, ISO 6483-1980. Method for volumetric rating of dumper bodies used for earth-moving
BS 6211:1982, ISO 7095-1982 BS 6211:1982, ISO 7095-1982. Specification for operator's controls for earth-moving machinery: crawler tractors and crawler loaders
BS 6264:1982, ISO 7130-1981 BS 6264:1982, ISO 7130-1981. Guide to procedure for operator training for earth-moving machinery
BS 6294:1982, ISO 7096-1982 BS 6294:1982, ISO 7096-1982. Method for measurement of body vibration transmitted to the operator of earth-moving machinery
BS 6300:1982, ISO 6016-1982 BS 6300:1982, ISO 6016-1982. Methods of measuring the masses of whole machines, their equipment and components of earth-moving machinery
BS 6419:1983, ISO 7464-1983 BS 6419:1983, ISO 7464-1983. Method for measurement of drawbar pull of earth-moving machinery
BS 6421:1983, ISO 7451-1983 BS 6421:1983, ISO 7451-1983. Method for volumetric rating of hoe type buckets of hydraulic excavators used for earth-moving
BS 6422:1983, ISO 7546-1983 BS 6422:1983, ISO 7546-1983. Method for volumetric rating of loader and front loading excavator buckets used for earth-moving
BS 1305:1974 BS 1305:1974. Specification for batch type concrete mixers
BS 3963:1974 BS 3963:1974. Method for testing the mixing performance of concrete mixers
BS 5547:1978, IEC 60576:1977 BS 5547:1978, IEC 60576:1977. Specification for portable bore-hole logging equipment (down to 300 m): general characteristics
BS 1676:1970 BS 1676:1970. Specification for heaters for tar and bitumen (mobile and transportable)
BS 2096:1954 BS 2096:1954. Method of testing oil-fired rotary dryers for use in asphalt and coated macadam plant
BS 3136-2:1972 BS 3136-2:1972. Specification for cold emulsion spraying machines for roads. Metric units
BS 192:1982 BS 192:1982. Specification for open-ended wrenches
BS 1842:1952 BS 1842:1952. Specification for double-ended open-jawed spanners for B.A. hexagon sizes
BS 2090:1954 BS 2090:1954. Specification for hook spanners, peg spanners, coupling wrenches and the related slots, holes and horns
BS 2470:1973 BS 2470:1973. Specification for hexagon socket screws and wrench keys. Inch series
BS 2558:1954 BS 2558:1954. Specification for tubular box spanners
BS 2575:1955 BS 2575:1955. Specification for square nut spanners (Post Office type)
BS 2583:1955 BS 2583:1955. Specification for podger spanners
BS 3594-1:1963 BS 3594-1:1963. Specification for pipe wrenches. Stillson type wrenches
BS 3594-2:1965 BS 3594-2:1965. Specification for pipe wrenches. Footprint type wrenches
BS 6333:1983 BS 6333:1983. Specification for adjustable wrenches
BS 2559-3:1973 BS 2559-3:1973. Specification for screwdrivers. Insulated screwdrivers
BS 876:1981 BS 876:1981. Specification for hand hammers
BS 6271:1982 BS 6271:1982. Specification for miniature hacksaw blades
BS 3066:1981 BS 3066:1981. Specification for engineers' cold chisels and allied tools
BS 3623:1981 BS 3623:1981. Specification for woodworkers' metal-bodied planes
BS 1937:1953 BS 1937:1953. Specification for engineers' ratchet braces and drilling pillars
BS 1978:1965 BS 1978:1965. Specification for bit braces
BS 2054:1953 BS 2054:1953. Specification for augers and auger bits
BS 2556:1973 BS 2556:1973. Specification for hand and breast drills
BS 1421:1947 BS 1421:1947. Picks, beater picks and mattocks
BS 673:1984, ISO 1180:1983 BS 673:1984, ISO 1180:1983. Specification for shanks for pneumatic tools and fitting dimensions of chuck bushings
BS 1748-6:1960 BS 1748-6:1960. Methods for the analysis of copper alloys. Method for the determination of tin in copper alloys (nickel coil reduction method)
BS 325:1947 BS 325:1947. Specification for black cup and countersunk bolts and nuts
BS 450:1958 BS 450:1958. Specification for machine screws and machine screw nuts (B.S.W. & B.S.F. threads)
BS 768:1958 BS 768:1958. Specification for slotted grub screws
BS 856:1969 BS 856:1969. Specification for wing nuts
BS 1083:1965 BS 1083:1965. Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads)
BS 1210:1963 BS 1210:1963. Specification for wood screws
BS 1768:1963 BS 1768:1963. Specification for Unified precision hexagon bolts, screws, & nuts (UNC & UNF threads). Normal series
BS 1769:1951 BS 1769:1951. Specification. Unified black hexagon bolts, screws, nuts (UNC & UNF threads). Heavy series
BS 2693-1:1956 BS 2693-1:1956. Specification for screwed studs. General purpose studs
BS 2693-2:1964 BS 2693-2:1964. Specification for screwed studs. Recommendations for high grade studs (with Class 5 interference fit threads to American Standard ASA B1.12)
BS 2827:1957 BS 2827:1957. Specification for machine screw nuts, pressed type (B.A. and Whitworth form threads)
BS 3409-1:1961 BS 3409-1:1961. Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads). Diameters ? in and over
BS 3409-2:1966 BS 3409-2:1966. Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads). Diameters below ? in
BS 3692:1967 BS 3692:1967. Specification for ISO metric precision hexagon bolts, screws and nuts. Metric units
BS 4168-1:1981 BS 4168-1:1981. Hexagon socket screws and wrench keys: metric series. Specification for hexagon socket head cap screws
BS 4168-6:1982 BS 4168-6:1982. Hexagon socket screws and wrench keys: metric series. Specification for hexagon socket button head screws
BS 4168-7:1982 BS 4168-7:1982. Hexagon socket screws and wrench keys: metric series. Specification for hexagon socket shoulder screws
BS 4168-8:1982 BS 4168-8:1982. Hexagon socket screws and wrench keys: metric series. Specification for hexagon socket countersunk head screws
BS 4168:Part 9:1983 BS 4168:Part 9:1983. Hexagon socket screws and wrench keys: metric series. Specification for wrench keys
BS 4174:1972 BS 4174:1972. Specification for self-tapping screws and metallic drive screws
BS 4183:1967 BS 4183:1967. Specification for machine screws and machine screw nuts. Metric series
BS 4439:1969 BS 4439:1969. Specification for screwed studs for general purposes. Metric series
BS 4933:1973 BS 4933:1973. Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts
BS 6104:Part 3:1981, ISO 898/5-1980 BS 6104:Part 3:1981, ISO 898/5-1980. Mechanical properties of fasteners. Specification for set screws and similar threaded fasteners not under tensile stresses
BS 6105:1981, ISO 3506-1979 BS 6105:1981, ISO 3506-1979. Specification for corrosion-resistant stainless steel fasteners
BS 6322-1:1982, ISO 4759/1-1978 BS 6322-1:1982, ISO 4759/1-1978. Tolerances for fasteners. Specification for tolerances of bolts, screws and nuts with thread diameters ≥ 1.6 mm and ≤ 150 mm and produc
BS 6322:Part 2:1982, ISO 4759/2-1979 BS 6322:Part 2:1982, ISO 4759/2-1979. Tolerances for fasteners. Specification for tolerances of bolts, screws and nuts with thread diameters from 1 mm up to 3 mm a
BS 1802:1951 BS 1802:1951. Specification for steel spring washers for general engineering and automobile purposes
BS 2061:1953 BS 2061:1953. Specification for phosphor bronze spring washers for general engineering purposes
BS 3401:1961 BS 3401:1961. Specification for beryllium copper crinkle washers
BS 3410:1961 BS 3410:1961. Specification for metal washers for general engineering purposes
BS 3673-1:1968 BS 3673-1:1968. Specification for spring retaining rings. Carbon steel circlips
BS 3673-2:1965 BS 3673-2:1965. Specification for spring retaining rings. Carbon steel E clips
BS 3673-3:1968 BS 3673-3:1968. Specification for spring retaining rings. Carbon steel C clips
BS 4320:1968 BS 4320:1968. Specification for metal washers for general engineering purposes. Metric series
BS 4463:1969 BS 4463:1969. Specification for crinkle washers for general engineering purposes. Metric series
BS 4464:1969 BS 4464:1969. Specification for spring washers for general engineering and automobile purposes. Metric series
BS 275:1927 BS 275:1927. Specification for dimensions of rivets (? inch to 1? inch diameter)
BS 641:1951 BS 641:1951. Dimensions of small rivets for general purposes
BS 1109:1943 BS 1109:1943. Specification for cold forged mild steel rivets for cold closing
BS 1804-1:1966 BS 1804-1:1966. Specification for parallel steel dowel pins. Inch series
BS 1804-2:1968 BS 1804-2:1968. Specification for parallel steel dowel pins. Metric series
BS 1804-3:1973 BS 1804-3:1973. Specification for parallel steel dowel pins. Parallel and taper types having screw threads for extraction purposes. Metric series
BS 1974:1953 BS 1974:1953. Specification for large aluminium alloy rivets (? in. to 1 in. nominal diameters)
BS 3575:1963 BS 3575:1963. Specification for rivets for the attachment of friction linings
BS 4620:1970 BS 4620:1970. Specification for rivets for general engineering purposes
BS 4895:1981 BS 4895:1981. Specification for semi-tubular rivets for general purpose use
BS 1486-1:1959 BS 1486-1:1959. Lubricating nipples. Lubricating nipples and adaptors for use on machinery and vehicles
BS 1486-2:1961 BS 1486-2:1961. Lubricating nipples. Heavy duty lubricating nipples
BS 1486-4:1981 BS 1486-4:1981. Lubricating nipples. Specification for hydraulic grease nipples
BS 4507:1969 BS 4507:1969. Specification for grease gun cartridges (composite type)
BS 5077:1974 BS 5077:1974. Specification for grease guns (hand-operated lever type) for use with cartridges complying with BS 4507
BS 5628-3:1985 BS 5628-3:1985. Code of practice for use of masonry. Materials and components, design and workmanship
BS 4656-34:1985, ISO 6899-1984 BS 4656-34:1985, ISO 6899-1984. Accuracy of machine tools and methods of test. Specification for power presses, mechanical open front type
BS EN ISO 105-A01:1996 Colour Scale BS EN ISO 105-A01:1996 Colour Scale. Textiles. Tests for colour fastness. Standard depths: matt
BS EN 20105-A03:1994 Colour Scale BS EN 20105-A03:1994 Colour Scale. Textiles. Tests for colour fastness. Grey scale for assessing staining (including half-steps)
BS 4185-1:1967 BS 4185-1:1967. Machine tool components. Locknuts ('C' type, socket set screw locking)
BS 4185-2:1967 BS 4185-2:1967. Machine tool components. Collars
BS 4185:Part 5:1971 BS 4185:Part 5:1971. Machine tool components. Cover plates and apertures
BS 4185-7:1973 BS 4185-7:1973. Machine tool components. Wide range collets
BS 4185-9:1976 BS 4185-9:1976. Specification. Machine tool components. Levelling screws, nuts and seating plates
BS 4185-11:1983 BS 4185-11:1983. Machine tool components. Recommendations for accuracy grades of gears
BS 4411:1969 BS 4411:1969. Specification for woodcutting bandsaw blades
BS 4442-1:1969 BS 4442-1:1969. Specification for lathe spindle noses and faceplates. Types 'A' and 'Camlock'
BS 4581:Part 1:1970 BS 4581:Part 1:1970. Flanges for mounting grinding wheels on grinding machine tools. Specification for dimensions of flanges for grinding wheels of 76.2 mm bore and greater
BS 4581-2:1984 BS 4581-2:1984. Flanges for mounting grinding wheels on grinding machine tools. Specification for dimensions and materials of flanges for grinding wheels of less than 76.2 mm bore
BS 4823:1972 BS 4823:1972. Guide to the selection of fitment bores for cylindrical shaft ends
BS 5110-1:1979, ISO 3592-1978 BS 5110-1:1979, ISO 3592-1978. Specification for programming languages for the numerical control of machines. Logical structure and major words of processor output (CLDAT
BS 5110-2:1978, ISO 4343-1978 BS 5110-2:1978, ISO 4343-1978. Specification for programming languages for the numerical control of machines. Minor elements of 2000-type records (post-processor commands
BS 5326:1976 BS 5326:1976. Specification. Internal broaching tools and pull chuck locations
BS 6101-1:1981 BS 6101-1:1981. Machine tool ball screws. Methods of calculating dynamic and static load and life ratings
BS 436-1:1967 BS 436-1:1967. Spur and helical gears. Basic rack form, pitches and accuracy (diametral pitch series)
BS 436-2:1970 BS 436-2:1970. Spur and helical gears. Basic rack form, modules and accuracy (1 to 50 metric module)
BS 545:1982 BS 545:1982. Specification for bevel gears (machine cut)
BS 721-1:1963 BS 721-1:1963. Specification for worm gearing. Imperial units
BS 721-2:1983 BS 721-2:1983. Specification for worm gearing. Metric units
BS 978-1:1968 BS 978-1:1968. Specification for fine pitch gears. Involute spur and helical gears
BS 978-2:1952 BS 978-2:1952. Specification for fine pitch gears. Cycloidal type gears
BS 978-2:Addendum No. 1:1959 BS 978-2:Addendum No. 1:1959. Gears for instruments and clockwork mechanisms. Cycloidal type gears. Double circular arc type gears
BS 978-3:1952 BS 978-3:1952. Specification for fine pitch gears. Bevel gears
BS 978-5:1965 BS 978-5:1965. Specification for fine pitch gears. Hobs and cutters
BS 2007:1975 BS 2007:1975. Specification for circular gear shaving cutters, 1 to 8 metric module, accuracy requirements
BS 2062-1:1959 BS 2062-1:1959. Specification for gear hobs. Hobs for general purposes, 1 d.p. to 20 d.p. inclusive
BS 2062-2:1960 BS 2062-2:1960. Specification for gear hobs. Hobs for gears for turbine reduction and similar drives
BS 2518-1:1954 BS 2518-1:1954. Specification for rotary form relieved gear cutters. Diametral pitch
BS 2518-2:1977 BS 2518-2:1977. Specification for rotary form relieved gear cutters. Metric module
BS 2697:1976 BS 2697:1976. Specification for rack type gear cutters, metric module
BS 3696-1:1977 BS 3696-1:1977. Specification for master gears. Spur and helical gears (metric module)
BS 4582-1:1970 BS 4582-1:1970. Specification for fine pitch gears (metric module). Involute spur and helical gears
BS 4582-2:1978 BS 4582-2:1978. Specification for fine pitch gears (metric module). Hobs and cutters
PD 6457:1970 PD 6457:1970. Guide to the application of addendum modification to involute spur and helical gears
BS 852:1939 BS 852:1939. Specification for toolmakers' straightedges
BS 906-1:1972 BS 906-1:1972. Specification for engineers' parallels. Metric units
BS 906-2:1972 BS 906-2:1972. Specification for engineers' parallels. Imperial units
BS 907:1965 BS 907:1965. Specification for dial gauges for linear measurement
BS 939:1977 BS 939:1977. Specification for engineers' squares (including cylindrical and block squares)
BS 958:1968 BS 958:1968. Specification for spirit levels for use in precision engineering
BS 1054:1975 BS 1054:1975. Specification for engineers' comparators for external measurement
BS 3064:1978 BS 3064:1978. Specification for metric sine bars and sine tables (excluding compound tables)
BS 4813:1972 BS 4813:1972. Method of measuring noise from machine tools excluding testing in anechoic chambers
BS 5317:1976 BS 5317:1976. Specification. Metric length bars and their accessories
BS 1916-1:1953 BS 1916-1:1953. Limits and fits for engineering. Limits and tolerances
BS 1916-2:1953 BS 1916-2:1953. Limits and fits for engineering. Guide to the selection of fits in BS 1916:Part 1
BS 1916-3:1963 BS 1916-3:1963. Limits and fits for engineering. Recommendations for tolerances, limits and fits for large diameters
BS 3730-2:1982 BS 3730-2:1982. Assessment of departures from roundness. Specification for characteristics of stylus instruments for measuring variations in radius (including guidance on use and calibr
BS 3730-3:1982 BS 3730-3:1982. Assessment of departures from roundness. Methods for determining departures from roundness using two- and three-point measurement
BS 4500A:1970 BS 4500A:1970. ISO limits and fits. Data sheet: selected ISO fits - hole basis
BS 4500B:1970 BS 4500B:1970. ISO limits and fits. Data sheet: selected ISO fits - shaft basis
BS 2011-2.1M:1984, IEC 60068-2-13:1983 BS 2011-2.1M:1984, IEC 60068-2-13:1983. Environmental testing. Tests. Test M. Low air pressure
BS EN 60534-2-3:1993 BS EN 60534-2-3:1993. Industrial-process control valves. Flow capacity. Test procedures
BS 1344-7:1984, ISO 4530:1983 BS 1344-7:1984, ISO 4530:1983. Methods of testing vitreous enamel finishes. Determination of resistance to heat
BS 4165:1984 BS 4165:1984. Specification for electrode wires and fluxes for the submerged arc welding of carbon steel and medium-tensile steel
BS 870:1950 BS 870:1950. Specification for external micrometers
BS 957-1:1941 BS 957-1:1941. Specification for feeler gauges. Inch units
BS 957-2:1969 BS 957-2:1969. Specification for feeler gauges. Metric units
BS 959:1950 BS 959:1950. Specification for internal micrometers (including stick micrometers)
BS 969:1982 BS 969:1982. Specification for limits and tolerances on plain limit gauges
BS 1044-1:1964 BS 1044-1:1964. Specificaton for gauge blanks. Plug, ring and calliper gauges
BS 1643:1983 BS 1643:1983. Specification for precision vernier height gauges
BS 1685:1951 BS 1685:1951. Specification for bevel protractors (mechanical and optical)
BS 1734:1951 BS 1734:1951. Specification for micrometer heads
BS 1790:1961 BS 1790:1961. Specification for length bars and their accessories (imperial units)
BS 3123:1959 BS 3123:1959. Specification for spring calipers and spring dividers
BS 4064:1966 BS 4064:1966. Specification for plain setting rings for use with internal diameter measuring machines. Metric units
BS 4065:1966 BS 4065:1966. Specification for plain setting rings for use with internal diameter measuring machines. Inch units
BS 4484-1:1969 BS 4484-1:1969. Specification for measuring instruments for constructional works. Metric graduation and figuring of instruments for linear measurement
BS 5535:1978 BS 5535:1978. Specification for right angle and box angle plates
BS 6365:1983 BS 6365:1983. Specification for precision vernier depth gauges
BS 6083:Part 1:1984, IEC 60118-1:1983 BS 6083:Part 1:1984, IEC 60118-1:1983. Hearing aids. Method for measurement of characteristics of hearing aids with induction pick-up coil input
BS 6083:Part 2:1984, IEC 60118-2:1983 BS 6083:Part 2:1984, IEC 60118-2:1983. Hearing aids. Methods for measurement of electroacoustical characteristics of hearing aids with automatic gain control circ
BS 6083-4:1981 BS 6083-4:1981. Hearing aids. Specification for magnetic field strength in audio-frequency induction loops for hearing aid purposes
BS 6083-5:1984, IEC 60118-5:1983 BS 6083-5:1984, IEC 60118-5:1983. Hearing aids. Specification for dimensions of the nipple and sealing device for insert earphones
BS 6083-11:1984, IEC 60118-11:1983 BS 6083-11:1984, IEC 60118-11:1983. Hearing aids. Specification for symbols and other markings on hearing aids and related equipment
BS 2545:1965 BS 2545:1965. Methods of fibre sampling for testing
BS 2610:1978 BS 2610:1978. Method of test for the determination of the cuprammonium fluidity of cotton and certain cellulosic man-made fibres
BS EN 20811:1992, ISO 811:1981 BS EN 20811:1992, ISO 811:1981. Textiles. Determination of resistance to water penetration. Hydrostatic pressure test
BS 2861:1984, ISO 7211-1:1984 BS 2861:1984, ISO 7211-1:1984. Methods for presentation of a weave diagram and plans for drafting, denting and lifting
BS 2863:1984, ISO 7211-3:1984 BS 2863:1984, ISO 7211-3:1984. Method for determination of crimp of yarn in fabric
BS 2864:1984, ISO 7211-4:1984 BS 2864:1984, ISO 7211-4:1984. Method for determination of twist in yarn removed from fabric
BS 2865:1984, ISO 7211-5:1984 BS 2865:1984, ISO 7211-5:1984. Methods for determination of linear density of yarn removed from fabric
BS 2866:1984, ISO 7211-6:1984 BS 2866:1984, ISO 7211-6:1984. Methods for determination of the mass of warp and weft per unit area of fabric
BS 2889:1967 BS 2889:1967. Method for the determination of trash content of cotton and for trash and lint content of waste intended for spinning, by the Shirley analyser
BS 3085:1981, ISO 4912:1981 BS 3085:1981, ISO 4912:1981. Method for evaluation of the maturity of cotton fibres (microscopic method)
BS 3090:1978 BS 3090:1978. Method of test for the determination of the cuprammonium fluidity of linen materials
BS 3183:1968 BS 3183:1968. Method for the determination of wool fibre diameter by the airflow method
BS 3411:1971 BS 3411:1971. Method for the determination of the tensile properties of individual textile fibres
BS 3424:Part 0:1982 BS 3424:Part 0:1982. Testing coated fabrics. Foreword and general introduction
BS 3424:Part 4:1982 BS 3424:Part 4:1982. Testing coated fabrics. Method 6. Method for determination of breaking strength and elongation at break
BS 3424-5:1982 BS 3424-5:1982. Testing coated fabrics. Methods 7A, 7B and 7C. Methods for determination of tear strength
BS 3424-7:1982 BS 3424-7:1982. Testing coated fabrics. Method 9. Method for determination of coating adhesion strength
BS 3424-22:1983 BS 3424-22:1983. Testing coated fabrics. Method 25. Methods for determination of fusion of PVC coatings and the state of cure of vulcanized rubber coatings
BS 3477:1962 BS 3477:1962. Method for the determination of oils, fats and waxes in cotton
BS 3582:1981 BS 3582:1981. Method for determination of oils, fats and waxes in wool
BS EN 24920:1992, ISO 4920:1981 BS EN 24920:1992, ISO 4920:1981. Textiles. Determination of resistance to surface wetting (spray test) of fabrics
BS 4029:1978 BS 4029:1978. Method of test for the determination of tensile elastic recovery of single fibres and filaments (constant-rate-of-extension machines)
BS 4032:1978 BS 4032:1978. Method of test for the determination of certain water- or alkali-soluble additives in cellulosic or synthetic fibres, yarns and fabrics or yarns and fabrics made from blends
BS 4098:1975 BS 4098:1975. Method for the determination of thickness, compression and recovery characteristics of textile floor coverings
BS 4253:1967 BS 4253:1967. Method for the ballistic tear testing of woven fabrics
BS 4303:1968 BS 4303:1968. Method for the determination of the resistance to tearing of woven fabrics by the wing-rip technique
BS 4323:1979, ISO 3005-1978 BS 4323:1979, ISO 3005-1978. Method for determination of dimensional change of fabrics induced by free steam
BS 4554:1970 BS 4554:1970. Method of test for wettability of textile fabrics
BS 4658:1978 BS 4658:1978. Methods of test for textiles - preparation of laboratory test samples and test specimens for chemical testing
BS 4674:1971 BS 4674:1971. Methods for the determination of the breaking load and knot breaking load of netting yarns for fishing nets
BS 4682-3:1981 BS 4682-3:1981. Methods of test for dimensional stability of textile floor coverings. Determination of dimensional changes after exposure to heat
BS 4682-4:1981 BS 4682-4:1981. Methods of test for dimensional stability of textile floor coverings. Determination of dimensional changes after immersion in water
BS 4768:1972 BS 4768:1972. Method for the determination of the bursting strength and bursting distension of fabrics
BS 4797:1978, ISO 3998-1977 BS 4797:1978, ISO 3998-1977. Method of test for textiles - determination of resistance to certain insect pests
CP 335-1:1973 CP 335-1:1973. Code of practice for selection and installation of miscellaneous town gas appliances. Domestic laundering and miscellaneous appliances
BS 4345:1968 BS 4345:1968. Specification for slotted angles
BS 4680:1971 BS 4680:1971. Specification for clothes lockers
BS 4092:Part 1:1966 BS 4092:Part 1:1966. Specification for domestic front entrance gates. Metal gates
BS 4092:Part 2:1966 BS 4092:Part 2:1966. Specification for domestic front entrance gates. Wooden gates
BS 435:1975 BS 435:1975. Specification for dressed natural stone kerbs, channels, quadrants and setts
BS 5931:1980 BS 5931:1980. Code of practice for machine laid in situ edge details for paved areas
BS 76:1974 BS 76:1974. Specification for tars for road purposes
BS 434-1:1984 BS 434-1:1984. Bitumen road emulsions (anionic and cationic). Specification for bitumen road emulsions
BS 434-2:1984 BS 434-2:1984. Bitumen road emulsions (anionic and cationic). Code of practice for use of bitumen road emulsions
BS 1446:1973 BS 1446:1973. Specification for mastic asphalt (natural rock asphalt fine aggregate) for roads and footways
BS 5273:1975 BS 5273:1975. Specification. Dense tar surfacing for roads and other paved areas
BS 3425:1966 BS 3425:1966. Method for the measurement of noise emitted by motor vehicles
BS 5956:1980 BS 5956:1980. Specification for A6-size microfiche for the motor industry
BS AU 143d:1984, ISO 2575-1982 BS AU 143d:1984, ISO 2575-1982. Specification for symbols for controls, indicators and tell-tales for road vehicles
BS AU 145a:1972 BS AU 145a:1972. Specification for reflex-reflecting number plates
BS AU 152:1970 BS AU 152:1970. Specification for rear marking plates for vehicles
BS AU 173:1979 BS AU 173:1979. Definitions for a three-dimensional reference system and fiducial marks
BS AU 175-1b:1983, ISO 3779-1983 BS AU 175-1b:1983, ISO 3779-1983. Vehicle identification numbers (VIN). Specification for content and structure
BS AU 175-2b:1983, ISO 3780-1983 BS AU 175-2b:1983, ISO 3780-1983. Vehicle identification numbers (VIN). Specification for world manufacturer identifier (WMI) codes
BS AU 175-3b:1983, ISO 4030:1983 BS AU 175-3b:1983, ISO 4030:1983. Vehicle identification numbers (VIN). Specification for location and attachment
BS AU 179:1981 BS AU 179:1981. Specification for dimensional codes for passenger cars
BS AU 184:1982, ISO 4100-1980 BS AU 184:1982, ISO 4100-1980. Specification for world parts manufacturer identifier code (WPMI) for road vehicles
BS 5676:1979, ISO 2710-1978 BS 5676:1979, ISO 2710-1978. Vocabulary for reciprocating internal combustion engines
BS AU 116:1965 BS AU 116:1965. Specification for dimensions of chassis for 27 ft public service vehicle (double deck)
BS AU 117:1965 BS AU 117:1965. Specification for dimensions of chassis for 30 ft public service vehicle (double deck)
BS AU 181:1982 BS AU 181:1982. Specification for interface dimensions for demountable vehicle body systems
BS AU 108:1965 BS AU 108:1965. Specification for plain and reinforced hoses of rubber
BS AU 110:1965 BS AU 110:1965. Specification for air pressure rubber brake hose
BS AU 168:1978 BS AU 168:1978. Method for determination of the windscreen fogging characteristics of organic trim materials in motor vehicles
BS 3157:1960 BS 3157:1960. Specification for latex foam rubber components for transport seating
BS AU 148-2:1969 BS AU 148-2:1969. Methods of test for motor vehicle paints. Resistance to continuous salt spray
BS AU 148-3:1969 BS AU 148-3:1969. Methods of test for motor vehicle paints. Flexibility and adhesion
BS AU 148-4:1969 BS AU 148-4:1969. Methods of test for motor vehicle paints. Resistance to abrasion
BS AU 148-5:1969 BS AU 148-5:1969. Methods of test for motor vehicle paints. Gloss measurement
BS AU 148-6:1969 BS AU 148-6:1969. Methods of test for motor vehicle paints. Hardness
BS AU 148-9:1969 BS AU 148-9:1969. Methods of test for motor vehicle paints. Resistance to dry heat
BS AU 148-10:1969 BS AU 148-10:1969. Methods of test for motor vehicle paints. Resistance to heat and corrosion
BS AU 148-11:1969 BS AU 148-11:1969. Methods of test for motor vehicle paints. Resistance to blistering
BS AU 148-12:1969 BS AU 148-12:1969. Methods of test for motor vehicle paints. Resistance to accelerated weathering
BS AU 148-13:1969 BS AU 148-13:1969. Methods of test for motor vehicle paints. Resistance to deterioration by contact with other materials
BS AU 148-14:1969 BS AU 148-14:1969. Methods of test for motor vehicle paints. Resistance to outdoor exposure
BS AU 148-15:1969 BS AU 148-15:1969. Methods of test for motor vehicle paints. Resistance to chipping
BS AU 138a:1980 BS AU 138a:1980. Specification for dimensions of 'contact' type couplings for air pressure braking systems on trailers and semi-trailers and their towing vehicles, and the arrangement
BS AU 142:1968 BS AU 142:1968. Methods of test for brake linings materials
BS AU 174-1:1979, ISO 4926-1978 BS AU 174-1:1979, ISO 4926-1978. Hydraulic brake systems, using non-petroleum base brake fluids for road vehicles. Specification for non-petroleum base reference fluids
BS AU 180:Part 1:1983 BS AU 180:Part 1:1983. Brake linings. Method for measurement of compressibility of brake lining material
BS AU 180-2:1982, ISO 6311:1980 BS AU 180-2:1982, ISO 6311:1980. Brake linings. Method for measurement of internal shear strength of lining material
BS AU 180:Part 3:1982 BS AU 180:Part 3:1982. Brake linings. Method for measurement of shear strength of disc brake pad and drum brake shoe assemblies
BS AU 180-4:1982, ISO 6313:1980 BS AU 180-4:1982, ISO 6313:1980. Brake linings. Method for determining effects of heat on dimensions and form of disc brake pads
BS AU 180-5:1983, ISO 6314:1980 BS AU 180-5:1983, ISO 6314:1980. Brake linings. Method for determining resistance to water, saline solution, oil and brake fluid of brake lining material
BS AU 180-6:1982, ISO 6315:1980 BS AU 180-6:1982, ISO 6315:1980. Brake linings. Method for assessment of seizure to ferrous mating surface due to corrosion
BS 1586:1982 BS 1586:1982. Methods for performance testing and presentation of performance data for refrigerant condensing units
BS 4580:1970 BS 4580:1970. Specification for number designation of organic refrigerants
BS 6148:Part 1:1981, ISO 1992/I-1974 BS 6148:Part 1:1981, ISO 1992/I-1974. Methods of test for commercial refrigerated cabinets. Calculation of linear dimensions, areas and volumes
BS 6148:Part 2:1981, ISO 1992/II-1973 BS 6148:Part 2:1981, ISO 1992/II-1973. Methods of test for commercial refrigerated cabinets. General test conditions
BS 6148:Part 3:1981, ISO 1992/III-1973 BS 6148:Part 3:1981, ISO 1992/III-1973. Methods of test for commercial refrigerated cabinets. Determination of temperature
BS 6148:Part 4:1981, ISO 1992/IV-1974 BS 6148:Part 4:1981, ISO 1992/IV-1974. Methods of test for commercial refrigerated cabinets. Defrosting test
BS 6148:Part 5:1981, ISO 1992/V-1974 BS 6148:Part 5:1981, ISO 1992/V-1974. Methods of test for commercial refrigerated cabinets. Determination of water vapour condensation
BS 6148:Part 6:1981, ISO 1992/VI-1974 BS 6148:Part 6:1981, ISO 1992/VI-1974. Methods of test for commercial refrigerated cabinets. Electrical energy consumption test
BS 6148-7:1983 BS 6148-7:1983. Methods of test for commercial refrigerated cabinets. Electrical tests
BS 6148-8:1981, ISO 1992-VIII:1978 BS 6148-8:1981, ISO 1992-VIII:1978. Methods of test for commercial refrigerated cabinets. Test for accidental mechanical contact
BS 4062-1:1982 BS 4062-1:1982. Valves for hydraulic fluid power systems. Methods for determining pressure differential/flow characteristics
BS 4518:1982 BS 4518:1982. Specification for metric dimensions of toroidal sealing rings ('O'-rings) and their housings
BS 4575:Part 1:1979, ISO 4413-1978 BS 4575:Part 1:1979, ISO 4413-1978. Fluid power transmission and control systems. Guide for hydraulic equipment and systems
BS 4617:1983 BS 4617:1983. Methods for determining the performance of pumps and motors for hydraulic fluid power transmission
BS 4862:Part 1:1983 BS 4862:Part 1:1983. Mounting dimensions of single rod double acting 10 bar pneumatic cylinders. Specification for cylinders up to 25 mm bore
BS 4862:Part 2:1983 BS 4862:Part 2:1983. Mounting dimensions of single rod double acting 10 bar pneumatic cylinders. Specification for cylinders, 32 mm bore and over, with detachable mountings
BS 5327:1976 BS 5327:1976. Specification. Swept elbow bends for fluid power applications
BS 5380:1984 BS 5380:1984. Specification for hydraulic port and stud coupling using 'O'-ring sealing and 'G' series fastening threads
BS 5630:1978 BS 5630:1978. Specification for interface dimensions of snap-on connections for use with electrically controlled hydraulic equipment
BS 5944-4:1984 BS 5944-4:1984. Measurement of airborne noise from hydraulic fluid power systems and components. Method of determining sound power levels from valves controlling flow and pressure
BS 6241:1982 BS 6241:1982. Specification for dimensions of housings for hydraulic seals incorporating bearing rings for reciprocating applications
BS 6331:Part 1:1983 BS 6331:Part 1:1983. Mounting dimensions of single rod double acting hydraulic cylinders. Specification for 160 bar medium series
BS 6331:Part 2:1983 BS 6331:Part 2:1983. Mounting dimensions of single rod double acting hydraulic cylinders. Specification for 160 bar compact series
BS 6331:Part 3:1983 BS 6331:Part 3:1983. Mounting dimensions of single rod double acting hydraulic cylinders. Specification for 250 bar series
DD 61:1979 DD 61:1979. Flammability spray test for hydraulic fluids
BS 2957:1958 BS 2957:1958. Specification for fireman's axe with ash handle
BS 3054:1959 BS 3054:1959. Specification for fireman's axe with rubber insulated handle
BS 3088:1959 BS 3088:1959. Specification for adjustable hand reamers with inserted blades
BS 3322:1981 BS 3322:1981. Specification for carpenters' squares and bevels
BS 5307:1976 BS 5307:1976. Specification. Basic ball-lock punches
BS 5310:Part 1:1976 BS 5310:Part 1:1976. Specification. Hand crimping tools for the termination of electrical cables and wires for low frequency and radio frequency applications. General requirements
BS 5310:Part 2A:1976 BS 5310:Part 2A:1976. Specification. Hand crimping tools for the termination of electrical cables and wires for low frequency and radio frequency applications. Hand crimping tools
BS 5310:Part 2B:1981 BS 5310:Part 2B:1981. Specification. Hand crimping tools for the termination of electrical cables and wires for low frequency and radio frequency applications. Hand crimping tools
BS 6268:1982, ISO 6544-1981 BS 6268:1982, ISO 6544-1981. Method of measurement for reaction torque and torque impulse from hand-held pneumatic assembly tools for installing threaded fasteners
BS 6416:1983, ISO 1703-1983 BS 6416:1983, ISO 1703-1983. Nomenclature for assembly tools for screws and nuts
BS 6433:1983, ISO 7294-1983 BS 6433:1983, ISO 7294-1983. Terminology and designation of the profile shape of woodworking saw teeth
BS 873-1:1983 BS 873-1:1983. Road traffic signs and internally illuminated bollards. Methods of test
BS 873-2:1984 BS 873-2:1984. Road traffic signs and internally illuminated bollards. Specification for miscellaneous signs
BS 873-3:1980 BS 873-3:1980. Road traffic signs and internally illuminated bollards. Specification for internally illuminated bollards
BS 873-5:1983 BS 873-5:1983. Road traffic signs and internally illuminated bollards. Specification for internally illuminated signs and external lighting luminaires
BS 873-6:1983 BS 873-6:1983. Road traffic signs and internally illuminated bollards. Specification for retroreflective and non-retroreflective signs
BS 3049:1976 BS 3049:1976. Specification. Pedestrian guard rails (metal)
BS 4485-1:1969 BS 4485-1:1969. Water cooling towers. Glossary of terms
BS 4485:Part 4:1975 BS 4485:Part 4:1975. Water cooling towers. Structural design of cooling towers
BS 5400-2:1978 BS 5400-2:1978. Steel, concrete and composite bridges. Specification for loads
BS 5400-3:1982 BS 5400-3:1982. Steel, concrete and composite bridges. Code of practice for design of steel bridges
BS 5400-5:1979 BS 5400-5:1979. Steel, concrete and composite bridges. Code of practice for design of composite bridges
BS 5400:Part 6:1980 BS 5400:Part 6:1980. Steel, concrete and composite bridges. Specification for materials and workmanship, steel
BS 5400-7:1978 BS 5400-7:1978. Steel, concrete and composite bridges. Specification for materials and workmanship, concrete, reinforcement and prestressing tendons
BS 5400-8:1978 BS 5400-8:1978. Steel, concrete and composite bridges. Recommendations for materials and workmanship, concrete, reinforcement and prestressing tendons
BS 5400-9.2:1983 BS 5400-9.2:1983. Steel, concrete and composite bridges. Bridge bearings. Specification for materials, manufacture and installation of bridge bearings
BS 5400:Part 10C:1980 BS 5400:Part 10C:1980. Steel, concrete and composite bridges. Charts for classification of details for fatigue
BS 5539:1978 BS 5539:1978. Specification for safety requirements in rotary milking parlours
BS 5696:Part 3:1979 BS 5696:Part 3:1979. Play equipment intended for permanent installation outdoors. Code of practice for installation and maintenance
BS 4163:1984 BS 4163:1984. Code of practice for health and safety in workshops of schools and similar establishments
BS 5601-1:1978 BS 5601-1:1978. Code of practice for ventilation and heating of caravans. Ventilation
BS 1945:1971 BS 1945:1971. Specification for fireguards for heating appliances (gas, electric and oil-burning)
BS 6539:1984 BS 6539:1984. Specification for fireguards for use with solid fuel appliances
BS 1877-8:1974 BS 1877-8:1974. Domestic bedding. Pillows and bolsters for domestic use (excluding cellular rubber pillows and bolsters)
BS 1877:Part 10:1982 BS 1877:Part 10:1982. Domestic bedding. Specification for mattresses and bumpers for children's cots, perambulators and similar domestic articles
BS 3173:1971 BS 3173:1971. Specification for non-pocketed or open type spring centre units for domestic mattresses
BS 5129:1982, EN 14:1982 BS 5129:1982, EN 14:1982. Specification for dimensions of bed blankets
BS 5340:1976 BS 5340:1976. Specification. Flexible polyurethane foam pillows for domestic use
BS 1711:1975 BS 1711:1975. Specification for solid rubber flooring
BS 2592:1973 BS 2592:1973. Specification for thermoplastic flooring tiles
BS 3260:1969 BS 3260:1969. Specification for semi-flexible PVC floor tiles
BS 3261:Part 1:1973 BS 3261:Part 1:1973. Specification for unbacked flexible PVC flooring. Homogeneous flooring
BS 1425:1960 BS 1425:1960. Specification for cleanliness of fillings and stuffings for bedding, upholstery, toys and other domestic articles
BS 3129:1959 BS 3129:1959. Specification for latex foam rubber components for furniture
BS 1625-6 and 4830:1972 BS 1625-6 and 4830:1972. Specifications for woven cotton tapes, light, medium and heavy qualities
BS 1664-8:1974 BS 1664-8:1974. Specifications for woven cotton webbings of five qualities
BS 5127:1974 BS 5127:1974. Specification for polyolefin webbing for divans and bed bases
BS 5867-1:1980 BS 5867-1:1980. Specification for fabrics for curtains and drapes. General requirements
BS 5867-2:1980 BS 5867-2:1980. Specification for fabrics for curtains and drapes. Flammability requirements
BS 5873-1:1980 BS 5873-1:1980. Educational furniture. Specification for functional dimensions, identification and finish of chairs and tables for educational institutions
BS 5459-3:1983 BS 5459-3:1983. Specification for performance requirements and tests for office furniture. Storage furniture
BS 5940-1:1980 BS 5940-1:1980. Office furniture. Specification for design and dimensions of office workstations, desks, tables and chairs
BS 1399:Part 1:1970 BS 1399:Part 1:1970. Specification for rotary shaft lip seals. Dimensions of shafts and housings
BS 1399:Part 2:1970 BS 1399:Part 2:1970. Specification for rotary shaft lip seals. Methods of performance rating
BS 1399:Part 3:1970 BS 1399:Part 3:1970. Specification for rotary shaft lip seals. Terminology, and recommendations for handling
BS 1498:1954 BS 1498:1954. Specification for gear hobbing machines for turbines and similar drives
BS 4361-1:1968 BS 4361-1:1968. Woodworking machines. Components
BS 4361-3:1972 BS 4361-3:1972. Specification for woodworking machines. Machine sizes and capacities
BS 5782:1979, IEC 60550:1977 BS 5782:1979, IEC 60550:1977. Specification for interface between numerical controls and industrial machines
BS 4656-1:1981 BS 4656-1:1981. Accuracy of machine tools and methods of test. Specification for lathes, general purpose type
BS 4656-3:1971 BS 4656-3:1971. Specification for the accuracy of machine tools and methods of tests. Milling machines, knee and column type, horizontal or vertical spindle plain
BS 4656-4:1971 BS 4656-4:1971. Specification for the accuracy of machine tools and methods of test. Milling machines, bed type, horizontal or vertical spindle
BS 4656-5:1979 BS 4656-5:1979. Specification for the accuracy of machine tools and methods of tests. Milling machines, knee and column type, horizontal spindle, universal
BS 4656:Part 8:1974 BS 4656:Part 8:1974. Accuracy of machine tools and methods of test. Internal cylindrical grinding machines with horizontal spindle
BS 4656-9:1974 BS 4656-9:1974. Accuracy of machine tools and methods of test. External cylindrical grinding machines with reciprocating table
BS 4656-10:1975 BS 4656-10:1975. Specification for the accuracy of machine tools and methods of test. Drilling machines, radial type
BS 4656-11:1974 BS 4656-11:1974. Accuracy of machine tools and methods of test. Drilling machines, vertical floor mounted column and pillar types
BS 4656-12:1979 BS 4656-12:1979. Specification for the accuracy of machine tools and methods of test. Dividing heads
BS 4656-13:1983, ISO 6481-1981 BS 4656-13:1983, ISO 6481-1981. Accuracy of machine tools and methods of test. Specification for broaching machines, vertical surface type
BS 4656-14:1983, ISO 6779-1981 BS 4656-14:1983, ISO 6779-1981. Accuracy of machine tools and methods of test. Specification for broaching machines, vertical internal type
BS 4656-15:1976 BS 4656-15:1976. Accuracy of machine tools and methods of test. Drilling machines, turret and single spindle co-ordinate types
BS 4656:Part 17:1973 BS 4656:Part 17:1973. Accuracy of machine tools and methods of test. Broaching machines, vertical universal type
BS 4656-18:1981 BS 4656-18:1981. Accuracy of machine tools and methods of test. Specification for broaching machines, horizontal internal type
BS 4656:Part 19:1976 BS 4656:Part 19:1976. Accuracy of machine tools and methods of test. Gear hobbing machines
BS 4656-23:1979 BS 4656-23:1979. Accuracy of machine tools and methods of test. Surface grinding machines with two columns - slideway grinding machines
BS 4656-25:1980 BS 4656-25:1980. Accuracy of machine tools and methods of test. Gear planing machines
BS 4656-26:1980 BS 4656-26:1980. Accuracy of machine tools and methods of test. Gear shaping machines
BS 4656-29:1981 BS 4656-29:1981. Accuracy of machine tools and methods of test. Specification for automatic lathes, multi-spindle (indexing drum) type
BS 4656:Part 31:1982 BS 4656:Part 31:1982. Accuracy of machine tools and methods of test. Specification for capstan, turret and automatic lathes, single spindle type greater than 25 mm diameter capaci
BS 4656:Part 32:1983 BS 4656:Part 32:1983. Accuracy of machine tools and methods of test. Specification for boring and milling machines, planer type
BS 6135:1981, ISO 2806-1980 BS 6135:1981, ISO 2806-1980. Glossary of terms used in the numerical control of machines
BS 46-1:1958 BS 46-1:1958. Keys and keyways and taper pins. Specification. Keys and keyways
BS 46-3:1951 BS 46-3:1951. Keys and keyways and taper pins. Specification for solid and split taper pins for general engineering purposes
BS 2059:1953 BS 2059:1953. Specification for straight-sided splines and serrations
BS 3550:1963 BS 3550:1963. Specification for involute splines
BS 4235-1:1972 BS 4235-1:1972. Specification for metric keys and keyways. Parallel and taper keys
BS 4235-2:1977, ISO 3912-1977 BS 4235-2:1977, ISO 3912-1977. Specification for metric keys and keyways. Woodruff keys and keyways
BS 6186-1:1981, ISO 4156:1981 BS 6186-1:1981, ISO 4156:1981. Specification for straight cylindrical involute splines: metric module, side fit. Dimensions and tolerances
BS 662-1:1979 BS 662-1:1979. Carbon disulphide for industrial use. Specification
BS 662-2:1978, ISO 3144:1974 BS 662-2:1978, ISO 3144:1974. Carbon disulphide for industrial use. Sampling and methods of test
BS 662-3:1979 BS 662-3:1979. Carbon disulphide for industrial use. Additional methods of test
BS 1460:1967 BS 1460:1967. Method for determination of apparent density after compaction of precipitated calcium carbonate
BS 2713:1966 BS 2713:1966. Specification for 2-ethoxyethanol (ethylene glycol monoethyl ether)
BS 3175:1959 BS 3175:1959. Specification for pentachlorophenol
BS 3674:1981 BS 3674:1981. Specification for sodium carbonate (technical grades)
BS 3769:1964 BS 3769:1964. Specification for copper naphthenate and copper naphthenate concentrates
BS 3770:1964 BS 3770:1964. Specification for zinc naphthenate and zinc naphthenate concentrates
BS 3947:1976 BS 3947:1976. Specification for liquid chlorine
BS AU 50-2.0a:1979 BS AU 50-2.0a:1979. Tyres and wheels. Wheels and rims. General (including terms and definitions, and construction and workmanship)
BS AU 50:Part 2:Section 1b:1980 BS AU 50:Part 2:Section 1b:1980. Tyres and wheels. Wheels and rims. Rim profiles and dimensions (including openings for valves)
BS AU 50-2.2a:1984 BS AU 50-2.2a:1984. Tyres and wheels. Wheels and rims. Specification for dimensions of wheel naves and hub centres for commercial vehicles
BS AU 50:Part 2:Section 5b:1976 BS AU 50:Part 2:Section 5b:1976. Tyres and wheels. Wheels and rims. Road wheels manufactured wholly or partly of cast light alloy for passenger cars
BS AU 50-2.6a:1983 BS AU 50-2.6a:1983. Tyres and wheels. Wheels and rims. Specification for road wheels manufactured wholly or partly of light alloy for mopeds and motor cycles
BS AU 50-3.2:1977, ISO 4570/I-1977 BS AU 50-3.2:1977, ISO 4570/I-1977. Tyres and wheels. Valves. Tyre valve threads 5V1, 5V2, 6V1 and 8V1
BS AU 50-3.3:1980, ISO 4570/II-1979 BS AU 50-3.3:1980, ISO 4570/II-1979. Tyres and wheels. Valves. Tyre valve threads 9V1, 10V2, 12V1 and 13V1
BS AU 50-3.4a:1980, ISO 4570/3-1980 BS AU 50-3.4a:1980, ISO 4570/3-1980. Tyres and wheels. Valves. Tyre valve threads 8V2, 10V1, 11V1, 13V2, 15V1, 16V1, 17V1, 17V2, 17V3, 19V1 and 20V1
BS AU 50-3.5:1983, ISO 7442-1982 BS AU 50-3.5:1983, ISO 7442-1982. Tyres and wheels. Valves. Dimensions for ISO core chamber No. 1 for tyre inflation valves
BS AU 50-3.6:1982, ISO 6762-1981 BS AU 50-3.6:1982, ISO 6762-1981. Tyres and wheels. Valves. Dimensions for ISO core chamber No. 2 for tyre inflation valves
BS AU 144b:1977 BS AU 144b:1977. Specification for retreaded car and commercial vehicle tyres
BS 4613:Part 1:1970 BS 4613:Part 1:1970. Specification for tyre pressure gauges. Indicating plunger portable type
BS 4613:Part 2:1970 BS 4613:Part 2:1970. Specification for tyre pressure gauges. Dial portable type
BS AU 149a:1980 BS AU 149a:1980. Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 N (normal)
BS AU 177a:1980 BS AU 177a:1980. Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 S (supplementary)
BS AU 7a:1983 BS AU 7a:1983. Specification for colour code for road vehicle electrical cables
BS AU 91:1965 BS AU 91:1965. Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system)
BS 3214:1974 BS 3214:1974. Specification for locking connectors for battery operated vehicles (320 ampere rating)
BS AU 40-4a:1966 BS AU 40-4a:1966. Specification for motor vehicle lighting and signalling equipment. Sealed beam headlamps
BS AU 156:1971 BS AU 156:1971. Recommendations for aiming of headlamps and auxiliary lamps on motor vehicles
BS AU 162a:1976 BS AU 162a:1976. Specification for headlamp optical aiming devices
BS 3190:1972 BS 3190:1972. Specification for speedometer and odometer systems for road vehicles
BS AU 141a:1971 BS AU 141a:1971. Specification for the performance of diesel engines for road vehicles
BS 4959:1974 BS 4959:1974. Recommendations for corrosion and scale prevention in engine cooling water systems
BS 5208:1975 BS 5208:1975. Specification for dimensions of power take-off driving shafts and mounting faces for small internal combustion engines
BS 5514:Part 4:1979, ISO 3046/IV-1978 BS 5514:Part 4:1979, ISO 3046/IV-1978. Reciprocating internal combustion engines. Performance. Speed governing
BS 5514-5:1979, ISO 3046-V:1978 BS 5514-5:1979, ISO 3046-V:1978. Reciprocating internal combustion engines. Performance. Torsional vibrations
BS AU 150b:1984 BS AU 150b:1984. Specification for automotive V-belts and pulleys
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
