BIS Standards Catalogue
BS EN 60601-2-1:1998, BS 5724-2-1:1998,IEC 60601-2-1:1998 BS EN 60601-2-1:1998, BS 5724-2-1:1998,IEC 60601-2-1:1998. Medical electrical equipment. Particular requirements for the safety of electron ac
BS EN 1503-3:2000 BS EN 1503-3:2000. Valves. Materials for bodies, bonnets and covers. Cast irons specified in European Standards
BS EN 60432-2:2000 BS EN 60432-2:2000. Incandescent lamps. Safety specifications. Tungsten halogen lamps for domestic and similar general lighting purposes
BS EN 12067-1:1999 BS EN 12067-1:1999. Gas/air ratio controls for gas burners and gas burning appliances. Pneumatic types
BS EN ISO 14971:2001 BS EN ISO 14971:2001. Medical devices. Application of risk management to medical devices
BS ISO/IEC 15417:2000 BS ISO/IEC 15417:2000. Information technology. Automatic identification and data capture techniques. Bar code symbology specification. Code 128
BS EN 60531:2000, IEC 60531:1999 BS EN 60531:2000, IEC 60531:1999. Household electric thermal storage room heaters. Methods for measuring performance
BS EN ISO 6946:1997 BS EN ISO 6946:1997. Building components and building elements. Thermal resistance and thermal transmittance. Calculation method
BS EN 60442:1999, IEC 60442:1998 BS EN 60442:1999, IEC 60442:1998. Electric toasters for household and similar purposes. Methods for measuring the performance
BS EN 12372:1999 BS EN 12372:1999. Natural stone test methods. Determination of flexural strength under concentrated load
BS 7962:2000 BS 7962:2000. Black materials for masking existing road markings. Specification
BS ISO 2475:1999 BS ISO 2475:1999. Chloroprene rubber (CR). General-purpose types. Evaluation procedure
BS EN 1252-1:1998 BS EN 1252-1:1998. Cryogenic vessels. Materials. Toughness requirements for temperatures below -80°C
BS EN 1436:1998 BS EN 1436:1998. Road marking materials. Road marking performance for road users
BS EN 12210:2000 BS EN 12210:2000. Windows and doors. Resistance to wind load. Classification
BS ISO 11556:1998 BS ISO 11556:1998. Paper and board. Determination of curl using a single vertically suspended test piece
BS EN ISO 1183-3:1999 BS EN ISO 1183-3:1999. Plastics. Methods for determining the density of non-cellular plastics. Gas pyknometer method
BS EN ISO 15186-1:2003 BS EN ISO 15186-1:2003. Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity. Laboratory measurements
BS ISO 3767-3:1995 BS ISO 3767-3:1995. Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for powered lawn a
BS EN ISO 717-1:1997 BS EN ISO 717-1:1997. Acoustics. Rating of sound insulation in buildings and of building elements. Airborne sound insulation
BS EN ISO 717-2:1997 BS EN ISO 717-2:1997. Acoustics. Rating of sound insulation in buildings and of building elements. Impact sound insulation
BS EN 50143:1999 BS EN 50143:1999. Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV
BS EN 61138:1998 BS EN 61138:1998. Cables for portable earthing and short-circuiting equipment
BS EN 1424:1998 BS EN 1424:1998. Road marking materials. Premix glass beads
BS EN ISO 10440-1:2001 BS EN ISO 10440-1:2001. Petroleum and natural gas industries. Rotary-type positive-displacement compressors. Process compressors (oil-free)
BS 7012-15:1997, ISO 8578:1997 BS 7012-15:1997, ISO 8578:1997. Light microscopes. Marking of objectives and eyepieces
BS ISO 1754:1998 BS ISO 1754:1998. Photography. Cameras using 35 mm film and roll film. Picture sizes
BS EN 60731:1997, IEC 60731:1997 BS EN 60731:1997, IEC 60731:1997. Medical electrical equipment. Dosimeters with ionization chambers as used in radiotherapy
BS ISO 11620:1998 BS ISO 11620:1998. Information and documentation. Library performance indicators
BS EN 60081:1998, IEC 60081:1997 BS EN 60081:1998, IEC 60081:1997. Double-capped fluorescent lamps. Performance specifications
BS EN 50144-2-7:2001 BS EN 50144-2-7:2001. Safety of hand-held electric motor operated tools. Particular requirements for spray guns
BS EN 50131-1:1997 BS EN 50131-1:1997. Alarm systems. Intrusion systems. General requirements
BS 7011-2.2:1998, ISO 8037-2:1997 BS 7011-2.2:1998, ISO 8037-2:1997. Consumable accessories for light microscopes. Slides. Specification for materials and quality of finish
BS EN 12415:2001 BS EN 12415:2001. Safety of machine tools. Small numerically controlled turning machines and turning centres
BS EN 60838-1:1998, IEC 60838-1:1997 BS EN 60838-1:1998, IEC 60838-1:1997. Miscellaneous lampholders. General requirements and tests
BS EN 130800:2001 BS EN 130800:2001. Harmonized system of quality assessment for electronic components. Sectional specification. Tantalum surface mounting capacitors
BS EN 442-2:1997 BS EN 442-2:1997. Specification for radiators and convectors. Test methods and rating
BS EN 12132-2:1999 BS EN 12132-2:1999. Feather and down. Methods of testing the down-proof properties of fabrics. Impact test
BS EN 12814-1:2000 BS EN 12814-1:2000. Testing of welded joints of thermoplastics semi-finished products. Bend test
BS ISO 188:1998, BS 903-A19:1998 BS ISO 188:1998, BS 903-A19:1998. Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
BS EN ISO 8388:2003 BS EN ISO 8388:2003. Knitted fabrics. Types. Vocabulary
BS EN 649:1997 BS EN 649:1997. Resilient floor coverings. Homogeneous and heterogeneous polyvinyl chloride floor coverings. Specification
BS EN 60127-4:1998 BS EN 60127-4:1998. Miniature fuses. Universal modular fuse-links (UMF)
BS EN 60238:1999 BS EN 60238:1999. Edison screw lampholders
BS EN 60264-3-1:2000, IEC 60264-3-1:1999 BS EN 60264-3-1:2000, IEC 60264-3-1:1999. Packaging of winding wires. Taper barrelled delivery spools. Basic dimensions
BS EN 10277-2:1999 BS EN 10277-2:1999. Bright steel products. Technical delivery conditions. Steels for general engineering purposes
BS ISO 10790:1999 BS ISO 10790:1999. Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
BS EN 1176-1:1998 BS EN 1176-1:1998. Playground equipment. General safety requirements and test methods
BS EN 1176-5:1999 BS EN 1176-5:1999. Playground equipment. Additional specific safety requirements and test methods for carousels
BS EN 1176-4:1998 BS EN 1176-4:1998. Playground equipment. Additional specific safety requirements and test methods for runways
BS EN 1176-2:1998 BS EN 1176-2:1998. Playground equipment. Additional specific safety requirements and test methods for swings
BS 7960:1999 BS 7960:1999. Door supervisors/stewards. Code of practice
BS ISO 11784:1996 BS ISO 11784:1996. Radio-frequency identification of animals. Code structure
BS EN 50338:2001 BS EN 50338:2001. Safety of household and similar electrical appliances. Particular requirements for pedestrian controlled battery powered electrical lawn-mowers
BS EN ISO 15512:2003 BS EN ISO 15512:2003. Plastics. Determination of water content
BS EN 651:1997 BS EN 651:1997. Resilient floor coverings. Polyvinyl chloride floor coverings with foam layer. Specification
BS EN 654:1997 BS EN 654:1997. Resilient floor coverings. Semi-flexible polyvinyl chloride tiles. Specification
BS EN 1471:1997 BS EN 1471:1997. Textile floor coverings. Assessment of changes in appearance
BS 6920-2.2.3:2000 BS 6920-2.2.3:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of
BS 6920-2.5:2000 BS 6920-2.5:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of tes
BS 6920-2.6:2000 BS 6920-2.6:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of tes
BS EN 238:1996, BS 2000-429:1996 BS EN 238:1996, BS 2000-429:1996. Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of the benzene content by infrared s
BS EN 1570:1999 BS EN 1570:1999. Safety requirements for lifting tables
BS EN 1011-4:2000 BS EN 1011-4:2000. Welding. Recommendations for welding of metallic materials. Arc welding of aluminium and aluminium alloys
BS 5588-8:1999 BS 5588-8:1999. Fire precautions in the design, construction and use of buildings. Code of practice for means of escape for disabled people
BS 5588-11:1997 BS 5588-11:1997. Fire precautions in the design, construction and use of buildings. Code of practice for shops, offices, industrial, storage and other similar buildings
EP 601:1999 EP 601:1999. BSI Concise Construction Standards (CCS)
BS EN 60335-2-27:1997 BS EN 60335-2-27:1997. Specification for safety of household and similar electrical appliances. Particular requirements. Skin exposure to ultraviolet and infrared radiation
BS EN 378-4:2000 BS EN 378-4:2000. Refrigerating systems and heat pumps. Safety and environmental requirements. Operation, maintenance, repair and recovery
BS EN 1011-3:2000 BS EN 1011-3:2000. Welding. Recommendations for welding of metallic materials. Arc welding of stainless steels
BS EN 1711:2000 BS EN 1711:2000. Non-destructive examination of welds. Eddy current examination of welds by complex plane analysis
BS EN 12799:2000 BS EN 12799:2000. Brazing. Non-destructive examination of brazed joints
BS 7870-6.2:1999 BS 7870-6.2:1999. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire perfo
BS 7870-6.3:1999 BS 7870-6.3:1999. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire perfo
BS EN 378-3:2000 BS EN 378-3:2000. Specification for refrigerating systems and heat pumps. Safety and environmental requirements. Installation site and personal protection
BS EN 583-5:2001 BS EN 583-5:2001. Non-destructive testing. Ultrasonic examination. Characterization and sizing of discontinuities
BS EN 1779:1999 BS EN 1779:1999. Non-destructive testing. Leak testing. Criteria for method and technique selection
BS EN 12797:2000 BS EN 12797:2000. Brazing. Destructive tests of brazed joints
BS EN 1011-2:2001 BS EN 1011-2:2001. Welding. Recommendations for welding of metallic materials. Arc welding of ferritic steels
BS EN 61242:1998 BS EN 61242:1998. Electrical accessories. Cable reels for household and similar purposes
BS 7870-6.1:1999 BS 7870-6.1:1999. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire perfo
BS EN 55015:2001 BS EN 55015:2001. Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
BS EN 50214:1998 BS EN 50214:1998. Flexible cables for lifts
BS EN 1975:2000 BS EN 1975:2000. Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity
BS EN 1321:1997 BS EN 1321:1997. Destructive test on welds in metallic materials. Macroscopic and microscopic examination of welds
BS EN 1015-19:1999 BS EN 1015-19:1999. Methods of test for mortar for masonry. Determination of water vapour permeability of hardened rendering and plastering mortars
BS EN 1593:1999 BS EN 1593:1999. Non-destructive testing. Leak testing. Bubble emission techniques
BS EN 1015-17:2000 BS EN 1015-17:2000. Methods of test for mortar for masonry. Determination of water-soluble chloride content of fresh mortars
BS 4N 100-3:1999 BS 4N 100-3:1999. Aircraft oxygen systems and equipment. Testing of equipment and systems
BS ISO/IEC 12207:1995 BS ISO/IEC 12207:1995. Information technology. Software life cycle processes
BS ISO 12222:2000 BS ISO 12222:2000. Cinematography. Manufacturer-printed, latent image identification on 16 mm, 35 mm & 65 mm film. Specifications and dimensions
BS EN 1289:1998 BS EN 1289:1998. Non-destructive examination of welds. Penetrant testing of welds. Acceptance levels
BS EN 60831-1:1998, IEC 60831-1:1996 BS EN 60831-1:1998, IEC 60831-1:1996. Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1kV. General. Per
BS EN 1290:1998 BS EN 1290:1998. Non-destructive examination of welds. Magnetic particle examination of welds
BS EN 1011-1:1998 BS EN 1011-1:1998. Welding. Recommendations for welding of metallic materials. General guidance for arc welding
BS EN ISO 9831:2003 BS EN ISO 9831:2003. Animal feeding stuffs, animal products, and faeces or urine. Determination of gross calorific value. Bomb calorimeter method
BS EN 1435:1997 BS EN 1435:1997. Non-destructive examination of welds. Radiographic examination of welded joints
BS EN 1714:1998 BS EN 1714:1998. Non destructive testing of welded joints. Ultrasonic testing of welded joints
BS EN 12517:1998 BS EN 12517:1998. Non-destructive testing of welds. Radiographic testing of welded joints. Acceptance levels
BS ISO/IEC 9798-2:1999 BS ISO/IEC 9798-2:1999. Information technology. Security techniques. Entity authentication mechanisms. Mechanisms using symmetric encipherment algorithms
BS EN 1726-1:1999 BS EN 1726-1:1999. Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N. G
BS EN 12062:1998 BS EN 12062:1998. Non-destructive examination of welds. General rules for metallic materials
BS EN ISO 14937:2001 BS EN ISO 14937:2001. Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control o
BS EN 60851-3:1998, IEC 60851-3:1996 BS EN 60851-3:1998, IEC 60851-3:1996. Methods of test for winding wires. Mechanical properties
BS AU 175-4a:1997 BS AU 175-4a:1997. Vehicle identification numbers (VIN). Specification for a visible vehicle identification number
BS EN 1712:1997 BS EN 1712:1997. Non-destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels
BS EN 113:1997 BS EN 113:1997. Wood preservatives. Test method for determining the protective effectiveness against wood destroying basidiomycetes. Determination of the toxic values
BS EN 609-1:1999 BS EN 609-1:1999. Agricultural and forestry machinery. Safety of log splitters. Wedge splitters
BS EN 60931-1:1998, IEC 60931-1:1996 BS EN 60931-1:1998, IEC 60931-1:1996. Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV. General
BS EN 12803:2000 BS EN 12803:2000. Footwear. Test methods for outsoles. Tensile strength and elongation
BS EN ISO 7096:2000, BS 6912-17:2000 BS EN ISO 7096:2000, BS 6912-17:2000. Earth-moving machinery. Laboratory evaluation of operator seat vibration
BS EN 12826:2000 BS EN 12826:2000. Footwear. Test methods for lining and insocks. Static friction
BS EN ISO 3521:2000, BS 2782-6:Method 644A:1997 BS EN ISO 3521:2000, BS 2782-6:Method 644A:1997. Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage
BS EN 1713:1998 BS EN 1713:1998. Non-destructive testing of welds. Ultrasonic testing. Characterization of indications in welds
BS EN 60811-5-1:2000, IEC 60811-5-1:1990 BS EN 60811-5-1:2000, IEC 60811-5-1:1990. Insulating and sheathing materials of electric and optical fibre cables. Common test methods. Methods specific to fil
BS EN 1291:1998 BS EN 1291:1998. Non-destructive testing of welds. Magnetic particle testing of welds. Acceptance levels
BS EN 583-1:1999 BS EN 583-1:1999. Non-destructive testing. Ultrasonic examination. General principles
BS EN ISO 105-E05:1997 BS EN ISO 105-E05:1997. Textiles. Tests for colour fastness. Colour fastness to spotting. Acid
BS EN 60679-1:1998, IEC 60679-1:1997 BS EN 60679-1:1998, IEC 60679-1:1997. Quartz crystal controlled oscillators of assessed quality. Generic specification
BS EN ISO 14130:1998 BS EN ISO 14130:1998. Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method
BS EN ISO 4375:2004 BS EN ISO 4375:2004. Hydrometric determinations. Cableway systems for stream gauging
BS EN ISO 105-E01:1996 BS EN ISO 105-E01:1996. Textiles. Tests for colour fastness. Colour fastness to water
BS EN ISO 105-E02:1996 BS EN ISO 105-E02:1996. Textiles. Tests for colour fastness. Colour fastness to sea water
BS EN 60851-6:1998, IEC 60851-6:1996 BS EN 60851-6:1998, IEC 60851-6:1996. Methods of test for winding wires. Thermal properties
BS EN 60335-2-34:2000, IEC 60335-2-34:1999 BS EN 60335-2-34:2000, IEC 60335-2-34:1999. Specification for safety of household and similar electrical appliances. Particular requirements for motor-compre
BS EN ISO 3171:1999, BS 2000-476:2002 BS EN ISO 3171:1999, BS 2000-476:2002. Methods of test for petroleum and its products. BS 2000-476: Petroleum liquids. Automatic pipeline sampling
BS EN 61591:1997, IEC 61591:1997 BS EN 61591:1997, IEC 61591:1997. Household range hoods. Methods for measuring performance
BS EN ISO 105-C06:1997 BS EN ISO 105-C06:1997. Textiles. Tests for colour fastness. Colour fastness to domestic and commercial laundering
BS EN ISO 105-E07:1997 BS EN ISO 105-E07:1997. Textiles. Tests for colour fastness. Colour fastness to spotting. Water
BS EN ISO 105-E04:1996 BS EN ISO 105-E04:1996. Textiles. Tests for colour fastness. Colour fastness to perspiration
BS EN 61558-1:1998 BS EN 61558-1:1998. Safety of power transformers, power supply units and similar. General requirements and tests
BS EN ISO 105-E06:1997 BS EN ISO 105-E06:1997. Textiles. Tests for colour fastness. Colour fastness to spotting. Alkali
BS EN ISO 105-E09:1997 BS EN ISO 105-E09:1997. Textiles. Tests for colour fastness. Colour fastness to potting
BS EN 61558-2-2:1998, IEC 61558-2-2:1997 BS EN 61558-2-2:1998, IEC 61558-2-2:1997. Safety of power transformers, power supply units and similar. Particular requirements for control transformers
BS EN 13451-2:2001 BS EN 13451-2:2001. Swimming pool equipment. Additional specific safety requirements and test methods for ladders, stepladders and handle bends
BS EN 60464-1:1999, IEC 60464-1:1998 BS EN 60464-1:1999, IEC 60464-1:1998. Varnishes used for electrical insulation. Definitions and general requirements
BS EN 136:1998 BS EN 136:1998. Respiratory protective devices. Full face masks. Requirements, testing, marking
BS EN 1708-1:1999 BS EN 1708-1:1999. Welding. Basic weld joint details in steel. Pressurized components
BS EN 60730-2-13:1998, IEC 60730-2-13:1995 BS EN 60730-2-13:1998, IEC 60730-2-13:1995. Automatic electrical controls for household and similar use. Particular requirements for humidity sensing control
BS EN 60730-2-14:1998, IEC 60730-2-14:1995 BS EN 60730-2-14:1998, IEC 60730-2-14:1995. Automatic electrical controls for household and similar use. Particular requirements for electric actuators
BS EN 60730-2-16:1998 BS EN 60730-2-16:1998. Automatic electrical controls for household and similar use . Particular requirements for automatic electrical water level controls of the float type for h
BS ISO 10791-6:1998 BS ISO 10791-6:1998. Test conditions for machining centres. Accuracy of feeds, speeds and interpolations
BS EN 12958:2000 BS EN 12958:2000. Footwear. Test methods for shanks. Fatigue resistance
BS 5440-2:2000 BS 5440-2:2000. Installation and maintenance of flues and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases). Specification for instal
BS EN 740:1999, BS 5724-2.204:1999 BS EN 740:1999, BS 5724-2.204:1999. Anaesthetic workstations and their modules. Particular requirements
BS EN 794-3:1999 BS EN 794-3:1999. Lung ventilators. Particular requirements for emergency and transport ventilators
BS EN ISO 13803:2004, BS 3900-D13:2000 BS EN ISO 13803:2004, BS 3900-D13:2000. Paints and varnishes. Determination of reflection haze on paint films at 20 degrees
BS EN ISO 15181-1:2004, BS 3900-K1:2001 BS EN ISO 15181-1:2004, BS 3900-K1:2001. Paints and varnishes. Determination of release rate of biocides from antifouling paints. General method for extraction
BS EN ISO 15181-2:2004, BS 3900-K2:2001 BS EN ISO 15181-2:2004, BS 3900-K2:2001. Paints and varnishes. Determination of release rate of biocides from antifouling paints. Determination of copper-ion co
BS EN ISO 6744-2:2004, BS 6782-16.2:2000 BS EN ISO 6744-2:2004, BS 6782-16.2:2000. Binders for paints and varnishes. Alkyd resins. Determination of phthalic anhydride content
BS EN ISO 6744-3:2004, BS 6782-16.3:2000 BS EN ISO 6744-3:2004, BS 6782-16.3:2000. Binders for paints and varnishes. Alkyd resins. Determination of unsaponifiable matter content
BS EN ISO 6744-1:2004, BS 6782-16.1:2000 BS EN ISO 6744-1:2004, BS 6782-16.1:2000. Binders for paints and varnishes. Alkyd resins. General methods
BS EN ISO 7143:2004, BS 6782-18:2001 BS EN ISO 7143:2004, BS 6782-18:2001. Paints, varnishes and binders. Methods of test for characterizing water-based coating materials and binders
BS EN ISO 6744-4:2004, BS 6782-16.4:2000 BS EN ISO 6744-4:2004, BS 6782-16.4:2000. Binders for paints and varnishes. Alkyd resins. Determination of fatty acid content
BS EN ISO 15880:2004, BS 6782-17:2001 BS EN ISO 15880:2004, BS 6782-17:2001. Paints, varnishes and binders. Determination of MEQ value of water-based coating materials and binders
BS EN 13041:2000 BS EN 13041:2000. Soil improvers and growing media. Determination of physical properties. Dry bulk density, air volume, water volume, shrinkage value and total pore space
BS EN 61000-4-17:1999, IEC 61000-4-17:1999 BS EN 61000-4-17:1999, IEC 61000-4-17:1999. Electromagnetic compatibility (EMC). Testing and measurement techniques. Ripple on d.c. input power port immunity
BS EN 61000-4-14:1999, IEC 61000-4-14:1999 BS EN 61000-4-14:1999, IEC 61000-4-14:1999. Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage fluctuation immunity test
BS EN 12326-2:2000 BS EN 12326-2:2000. Slate and stone products for discontinuous roofing and cladding. Methods of test
BS EN 295-6:1996 BS EN 295-6:1996. Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for vitrified clay manholes
BS EN 12255-5:1999 BS EN 12255-5:1999. Wastewater treatment plants. Lagooning processes
BS EN 933-1:1997 BS EN 933-1:1997. Tests for geometrical properties of aggregates. Determination of particle size distribution. Sieving method
BS EN 1097-9:1998 BS EN 1097-9:1998. Tests for mechanical and physical properties of aggregates. Determination of the resistance to wear by abrasion from studded tyres. Nordic test
KIT 21 KIT 21. Occupational health and safety management systems set
BS EN 61000-4-16:1998, IEC 61000-4-16:1998 BS EN 61000-4-16:1998, IEC 61000-4-16:1998. Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, common m
BS EN 10292:2000 BS EN 10292:2000. Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming. Technical delivery conditions
BIP 2055:2004 BIP 2055:2004. Health and Safety Law Poster
BS EN 30-2-1:1998 BS EN 30-2-1:1998. Domestic cooking appliances burning gas. Rational use of energy. General
BS EN ISO 10484:2004 BS EN ISO 10484:2004. Widening test on nuts
BS EN 1374:2000 BS EN 1374:2000. Agricultural machinery. Silos stationary unloaders for round silos. Safety
BS EN 13256:2001 BS EN 13256:2001. Geotextiles and geotextile-related products. Characteristics required for use in the construction of tunnels and underground structures
BS EN 12668-1:2000 BS EN 12668-1:2000. Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Instruments
BS EN 12668-3:2000 BS EN 12668-3:2000. Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Combined equipment
BIP 0051:2004 BIP 0051:2004. ITIL. Service support
BIP 0052:2004 BIP 0052:2004. ITIL. Service delivery
BIP 0053:2004 BIP 0053:2004. ITIL. Security Management
BS EN ISO 7792-2:2004 BS EN ISO 7792-2:2004. Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN 50091-1-1:1997 BS EN 50091-1-1:1997. Uninterruptible power systems (UPS). General and safety requirements for UPS used in operator access areas
BS EN ISO 14855:2004 BS EN ISO 14855:2004. Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions. Method by analysis of
BS EN ISO 7792-1:2004 BS EN ISO 7792-1:2004. Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Designation system and basis for specifications
BS IEC 60287-2-1:1994+A2:2006 BS IEC 60287-2-1:1994+A2:2006. Electric cables. Calculation of the current rating. Thermal resistance. Calculation of thermal resistance
BS EN ISO 14852:2004 BS EN ISO 14852:2004. Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide
BS EN ISO 14616:2004 BS EN ISO 14616:2004. Plastics. Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures. Determination of the shrinkage stress and contraction stress
BS EN ISO 7765-1:2004 BS EN ISO 7765-1:2004. Plastics film and sheeting. Determination of impact resistance by the free-falling dart method. Staircase methods
BS EN 60809:1996, IEC 60809:1995 BS EN 60809:1996, IEC 60809:1995. Lamps for road vehicles. Dimensional, electrical and luminous requirements
BS EN ISO 11501:2004, ISO 11501:1995 BS EN ISO 11501:2004, ISO 11501:1995. Plastics. Film and sheeting. Determination of dimensional change on heating. Determination of dimensional change on heating o
BS EN ISO 14419:1999 BS EN ISO 14419:1999. Textiles. Oil repellency. Hydrocarbon resistance test
BS EN ISO 8295:2004 BS EN ISO 8295:2004. Plastics. Film and sheeting. Determination of the coefficients of friction
BS EN 60901:1996 BS EN 60901:1996. Specification for single-capped fluorescent lamps. Performance specifications
BS EN 12639:2000 BS EN 12639:2000. Liquid pumps and pump units. Noise test code. Grade 2 and grade 3 of accuracy
BS EN 50160:2000 BS EN 50160:2000. Voltage characteristics of electricity supplied by public distribution systems
BS EN 1495:1998 BS EN 1495:1998. Lifting platforms. Mast climbing work platforms
BS EN 681-3:2000 BS EN 681-3:2000. Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications water and drainage applications. Vulcanized rubber
BS EN 681-1:1996 BS EN 681-1:1996. Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Vulcanized rubber
BS EN 89:2000 BS EN 89:2000. Gas-fired storage water heaters for the production of domestic hot water
BS EN 61558-2-7:1998 BS EN 61558-2-7:1998. Safety of power transformers, power supply units and similar. Particular requirements for transformers for toys
KIT 6 KIT 6. Electromagnetic compatibility pack
BS EN 61558-2-5:1998, IEC 61558-2-5:1997 BS EN 61558-2-5:1998, IEC 61558-2-5:1997. Safety of power transformers, power supply units and similar. Particular requirements for shaver transformers and sha
BS EN 60317-0-3:1998, IEC 60317-0-3:1997 BS EN 60317-0-3:1998, IEC 60317-0-3:1997. Specifications for particular types of winding wires. General requirements. Enamelled round aluminium wire
BS EN 60400:2000, IEC 60400:1999 BS EN 60400:2000, IEC 60400:1999. Lampholders for tubular fluorescent lamps and starterholders
BS EN ISO 9773:1999 BS EN ISO 9773:1999. Plastics. Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
BS EN 207:1999 BS EN 207:1999. Personal eye-protection. Filters and eye-protectors against laser radiation (laser eye-protectors)
BS EN 12390-1:2000 BS EN 12390-1:2000. Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds
BS EN 12390-5:2000 BS EN 12390-5:2000. Testing hardened concrete. Flexural strength of test specimens
BS EN 61628-2:1999 BS EN 61628-2:1999. Corrugated pressboard and presspaper for electrical purposes. Methods of test
BS EN 60947-4-2:2000, IEC 60947-4-2:1999 BS EN 60947-4-2:2000, IEC 60947-4-2:1999. Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor motor controllers and starter
BS EN 60947-4-3:2000, IEC 60947-4-3:1999 BS EN 60947-4-3:2000, IEC 60947-4-3:1999. Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor controllers and contactors fo
BS EN 12390-7:2000 BS EN 12390-7:2000. Testing hardened concrete. Density of hardened concrete
BS EN 50241-1:1999 BS EN 50241-1:1999. Specification for open path apparatus for the detection of combustible or toxic gases and vapours. General requirements and test methods
BS EN 60368-1:2000, IEC 60368-1:2000 BS EN 60368-1:2000, IEC 60368-1:2000. Piezoelectric filters. Generic specification
BS EN 1332-1:1999 BS EN 1332-1:1999. Identification card systems. Man-machine interface. Design principles for the user interface
BS 7870-2:1999 BS 7870-2:1999. LV and MV polymeric insulated cables for use by distribution and generation utilities. Methods of test
BS EN 12390-6:2000 BS EN 12390-6:2000. Testing hardened concrete. Tensile splitting strength of test specimens
BS EN ISO 14589:2001 BS EN ISO 14589:2001. Blind rivets. Mechanical testing
BS EN ISO 14588:2001 BS EN ISO 14588:2001. Blind rivets. Terminology and definitions
BS EN ISO 15973:2001 BS EN ISO 15973:2001. Closed and blind rivets with break pull mandrel and protruding head. AIA/St
BS EN ISO 15974:2001 BS EN ISO 15974:2001. Closed and blind rivets with break pull mandrel and countersunk head. AIA/St
BS EN 60309-1:1999, IEC 60309-1:1999 BS EN 60309-1:1999, IEC 60309-1:1999. Plugs, socket-outlets and couplers for industrial purposes. General requirements
BS 5588-4:1998 BS 5588-4:1998. Fire precautions in the design, construction and use of buildings. Code of practice for smoke control using pressure differentials
BS 5588-7:1997 BS 5588-7:1997. Fire precautions in the design, construction and use of buildings. Code of practice for the incorporation of atria in buildings
BS 5588-9:1999 BS 5588-9:1999. Fire precautions in the design, construction and use of buildings. Code of practice for ventilation and air conditioning ductwork
BS EN 60076-1:1997 BS EN 60076-1:1997. Power transformers. General
BS EN 61184:1997, IEC 61184:1997 BS EN 61184:1997, IEC 61184:1997. Bayonet lampholders
BS EN 60603-2:1998, IEC 60603-2:1995,QC 010000XX0002:1995 BS EN 60603-2:1998, IEC 60603-2:1995,QC 010000XX0002:1995. Connectors for frequencies below 3 MHz for use with printed boards. Detail specific
BS EN 1074-2:2000 BS EN 1074-2:2000. Valves for water supply. Fitness for purpose requirements and appropriate verification tests. Isolating valves
BS EN 60838-2-1:1997, IEC 60838-2-1:1994 BS EN 60838-2-1:1997, IEC 60838-2-1:1994. Miscellaneous lampholders. Particular requirements. Lampholders S14
BS EN 60371-3-7:1996, IEC 60371-3-7:1995 BS EN 60371-3-7:1996, IEC 60371-3-7:1995. Specification for insulating materials based on mica. Specifications for individual materials. Polyester film mica pa
BS EN 12814-3:2000 BS EN 12814-3:2000. Testing of welded joints of thermoplastics semi-finished products. Tensile creep test
BS EN 60927:1997, IEC 60927:1996 BS EN 60927:1997, IEC 60927:1996. Specification for auxiliaries for lamps. Starting devices (other than glow starters). Performance requirements
BS EN 60317-0-2:1998, IEC 60317-0-2:1997 BS EN 60317-0-2:1998, IEC 60317-0-2:1997. Specification for particular types of winding wires. General requirements. Enamelled rectangular copper
BS EN ISO 8502-10:2004, BS 7079-B10:2004 BS EN ISO 8502-10:2004, BS 7079-B10:2004. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surfac
BS EN ISO 11126-10:2004, BS 7079-F10:2004 BS EN ISO 11126-10:2004, BS 7079-F10:2004. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic
BS 6651:1999 BS 6651:1999. Code of practice for protection of structures against lightning
BS EN 12186:2000 BS EN 12186:2000. Gas supply systems. Gas pressure regulating stations for transmission and distribution. Functional requirements
BS EN 12279:2000 BS EN 12279:2000. Gas supply systems. Gas pressure regulating installations on service lines. Functional requirements
BS EN 60061-1:1997 BS EN 60061-1:1997. Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Lamps caps
BS EN 1359:1999 BS EN 1359:1999. Gas meters. Diaphragm gas meters
BS EN 752-4:1998 BS EN 752-4:1998. Drain and sewer systems outside buildings. Hydraulic design and environmental considerations
BS EN 71-1:2001 BS EN 71-1:2001. Safety of toys. Mechanical and physical properties
BS EN 1930:2000 BS EN 1930:2000. Child care articles. Safety barriers. Safety requirements and test methods
BS EN 61000-4-6:1996, IEC 61000-4-6:1996 BS EN 61000-4-6:1996, IEC 61000-4-6:1996. Electromagnetic compatibility (EMC). Testing and measurement techniques. Immunity to conducted disturbances, induced
BS EN 927-3:2000 BS EN 927-3:2000. Paints and varnishes. Coating materials and coating systems for exterior wood. Natural weathering test
BS EN ISO 772:2001 BS EN ISO 772:2001. Hydrometric determinations. Vocabulary and symbols
BS EN ISO 19105:2005 BS EN ISO 19105:2005. Geographic information. Conformance and testing
BS EN 71-4:1998+A3:2007 BS EN 71-4:1998+A3:2007. Safety of toys. Experimental sets for chemistry and related activities
BS EN 12259-2:1999 BS EN 12259-2:1999. Fixed firefighting systems. Components for sprinkler and water spray systems. Wet alarm valve assemblies
BS EN 12259-3:2000 BS EN 12259-3:2000. Fixed firefighting systems. Components for sprinkler and water spray systems. Dry alarm valve assemblies
BS EN ISO 140-1:1998 BS EN ISO 140-1:1998. Acoustics. Measurement of sound insulation in buildings and of building elements. Requirements for laboratory test facilities with suppressed flanking transm
BS 6920-1:2000 BS 6920-1:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Specification
BS EN 60061-3:1997 BS EN 60061-3:1997. Lamps caps and holders together with gauges for the control of interchangeability and safety. Gauges
BS EN 61603-2:1997, IEC 61603-2:1997 BS EN 61603-2:1997, IEC 61603-2:1997. Transmission of audio and/or video and related signals using infra-red radiation. Transmission systems for audio wide band an
BS EN 60704-2-13:2000+A2:2008 BS EN 60704-2-13:2000+A2:2008. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for rang
BS EN 60061-2:1997 BS EN 60061-2:1997. Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Lampholders
BS EN ISO 11126-9:2004, BS 7079-F9:2004 BS EN ISO 11126-9:2004, BS 7079-F9:2004. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blas
BS EN 61319-1:1996, IEC 61319-1:1995 BS EN 61319-1:1996, IEC 61319-1:1995. Interconnections of satellite receiving equipment. Europe
BS 4553-1:1998 BS 4553-1:1998. Specification for 600/1000 V single-phase split concentric electric cables. Cables having PVC insulation
BS 4553-2:1998 BS 4553-2:1998. Specification for 600/1000 V single-phase split concentric electric cables. Cables having thermosetting insulation
BS 4553-3:1998 BS 4553-3:1998. Specification for 600/1000 V single-phase split concentric electric cables. Cables having thermosetting insulation and low emission of smoke and corrosive gases when aff
BS 7889:1997 BS 7889:1997. Electric cables. Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V
BS 7846:2000 BS 7846:2000. Electric cables. 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire
BS 7629-1:1997 BS 7629-1:1997. Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire. Multicore cables
BS 6346:1997 BS 6346:1997. Electric cables. PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V
BS 7211:1998 BS 7211:1998. Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low em
BS 5446-1:2000 BS 5446-1:2000. Fire detection and fire alarm devices for dwellings. Specification for smoke alarms
BS EN 201:1997 BS EN 201:1997. Rubber and plastics machines. Injection moulding machines. Safety requirements
BS EN 933-5:1998 BS EN 933-5:1998. Tests for geometrical properties of aggregates. Determination of percentage of crushed and broken surfaces in coarse aggregate particles
BS EN 13087-8:2000 BS EN 13087-8:2000. Protective helmets. Test methods. Electrical properties
BS EN 1269:1997+A1:2007 BS EN 1269:1997+A1:2007. Textile floor coverings. Assessment of impregnations in needled floor coverings by means of a soiling test
BS 7629-2:1997 BS 7629-2:1997. Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire. Multipair cables
BS 6004:2000 BS 6004:2000. Electric cables. PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring
BS EN 60335-2-40:1998 BS EN 60335-2-40:1998. Specification for safety of household and similar electrical appliances. Particular requirements for electrical heat pumps, air-conditioners and dehumidifi
BS EN ISO 14851:2004 BS EN ISO 14851:2004. Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by measuring the oxygen demand in a closed respirome
BS EN 1:1998 BS EN 1:1998. Flued oil stoves with vaporizing burners
BS ISO 6721-9:1997+A1:2007, ISO 6721-9:1997 BS ISO 6721-9:1997+A1:2007, ISO 6721-9:1997. Plastics. Determination of dynamic mechanical properties. Tensile vibration. Sonic-pulse propagation method
BS 7950:1997 BS 7950:1997. Specification for enhanced security performance of casement and tilt/turn windows in domestic applications
BS 6007:2000 BS 6007:2000. Electric cables. Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring
BS 6231:1998 BS 6231:1998. Specification for PVC-insulated cables for switchgear and controlgear wiring
BS EN 60901:1996+A4:2008 BS EN 60901:1996+A4:2008. Single-capped fluorescent lamps. Performance specifications
BS EN 1459:1999 BS EN 1459:1999. Safety of industrial trucks. Self-propelled variable reach trucks
BS EN ISO 180:2001 BS EN ISO 180:2001. Plastics. Determination of Izod impact strength
BS EN 1564:1997 BS EN 1564:1997. Founding. Austempered ductile cast irons
BS 6312-2.2:1997 BS 6312-2.2:1997. Connectors for analogue telecommunication interfaces. Sockets for use with plugs specified in BS 6312-1. Particular requirements for fixed socket-outlets used in per
BS EN 10269:1999 BS EN 10269:1999. Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
BS EN 1865:2000 BS EN 1865:2000. Specifications for stretchers and other patient handling equipment used in road ambulances
BS EN 12013:2000+A1:2008 BS EN 12013:2000+A1:2008. Plastics and rubber machines. Internal mixers. Safety requirements
BS EN ISO 13802:2006 BS EN ISO 13802:2006. Plastics. Verification of pendulum impact-testing machines. Charpy, Izod and tensile impact-testing
BS EN 50136-1-1:1998+A2:2008 BS EN 50136-1-1:1998+A2:2008. Alarm systems. Alarm transmission systems and equipment. General requirements for alarm transmission systems
BS 5546:2000 BS 5546:2000. Specification for installation of hot water supplies for domestic purposes, using gas-fired appliances of rated input not exceeding 70 kW
BS 7895:1997 BS 7895:1997. Specification for bayonet lampholders with enhanced safety
BS EN 60598-2-22:1998+A2:2008 BS EN 60598-2-22:1998+A2:2008. Luminaires. Particular requirements. Luminaires for emergency lighting
BS 6798:2000 BS 6798:2000. Specification for installation of gas-fired boilers of rated input not exceeding 70 kW net
BS EN 60371-3-9:1996, IEC 60371-3-9:1995 BS EN 60371-3-9:1996, IEC 60371-3-9:1995. Insulating materials based on mica. Specifications for individual materials. Moulding micanite
BS 4N 100-2:1999 BS 4N 100-2:1999. Aircraft oxygen systems and equipment. Tests for the compatibility of materials in the presence of oxygen
BS 6057-3.5:1996, ISO 127:1995 BS 6057-3.5:1996, ISO 127:1995. Rubber latices. Methods of test. Determination of KOH number of natural rubber latices
BS 6057-3.9:1996, ISO 976:1996 BS 6057-3.9:1996, ISO 976:1996. Rubber latices. Methods of test. Determination of pH
BS 6057-3.2:1997, ISO 124:1997 BS 6057-3.2:1997, ISO 124:1997. Rubber latices. Methods of test. Determination of total solids content of rubber latices
BS EN 144-1:2000 BS EN 144-1:2000. Respiratory protective devices. Gas cylinder valves. Thread connections for insert connector
BS 6F 100:1998 BS 6F 100:1998. Procedure for inspection and testing of textiles for aerospace purposes
BS 2X 33:1998 BS 2X 33:1998. Specification for two component epoxy primer for aerospace purposes
BS 2X 34:1998 BS 2X 34:1998. Specification for two component polyurethane finish for aerospace purposes
BS EN ISO 14593:2005, BS 6068-5.23:1999 BS EN ISO 14593:2005, BS 6068-5.23:1999. Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium. Method by analys
BS G 198-5:1997 BS G 198-5:1997. Sleeves and moulded components for aircraft electric cables and equipment wires. Specification for heat shrinkable moulded shapes
BS EN 656:2000 BS EN 656:2000. Gas-fired central heating boilers. Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW
BS EN 1101:1996 BS EN 1101:1996. Textiles and textile products. Burning behaviour. Curtains and drapes. Detailed procedure to determine the ignitability of vertically oriented specimens (small flame)
BS EN 772-16:2000 BS EN 772-16:2000. Methods of test for masonry units. Determination of dimensions
BS 410-1:2000, ISO 3310-1:2000 BS 410-1:2000, ISO 3310-1:2000. Test sieves. Technical requirements and testing. Test sieves of metal wire cloth
BS EN 13277-3:2000+A1:2007 BS EN 13277-3:2000+A1:2007. Protective equipment for martial arts. Additional requirements and test methods for trunk protectors
BS EN 61675-1:1998+A1:2008, IEC 61675-1:1998 BS EN 61675-1:1998+A1:2008, IEC 61675-1:1998. Radionuclide imaging devices. Characteristics and test conditions. Positron emission tomographs
BS EN 1097-6:2000 BS EN 1097-6:2000. Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
BS EN 509:2000 BS EN 509:2000. Decorative fuel-effect gas appliances
BS EN ISO 15225:2000 BS EN ISO 15225:2000. Nomenclature. Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange
BS EN 1123-1:1999 BS EN 1123-1:1999. Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Requirements, testing, quality control
BS EN ISO 660:2000 BS EN ISO 660:2000. Animal and vegetable fats and oils. Determination of acid value and acidity
BS EN 13265:2001 BS EN 13265:2001. Geotextiles and geotextile-related products. Characteristics required for use in liquid waste containment projects
BS EN 13257:2001 BS EN 13257:2001. Geotextiles and geotextile-related products. Characteristics required for use in solid waste disposals
BS EN 13432:2000 BS EN 13432:2000. Packaging. Requirements for packaging recoverable through composting and biodegradation. Test scheme and evaluation criteria for the final acceptance of packaging
BS EN 13249:2001 BS EN 13249:2001. Geotextiles and geotextile-related products. Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt
BS EN 143:2000 BS EN 143:2000. Respiratory protective devices. Particle filters. Requirements, testing, marking
BS EN 60439-1:1999, IEC 60439-1:1999 BS EN 60439-1:1999, IEC 60439-1:1999. Low-voltage switchgear and controlgear assemblies. Type-tested and partially type-tested assemblies
BS EN 13254:2001 BS EN 13254:2001. Geotextiles and geotextile-related products. Characteristics required for use in the construction of reservoirs and dams
BS EN 772-2:1998 BS EN 772-2:1998. Methods of test for masonry units. Determination of percentage area of voids in masonry units (by paper indentation)
BS EN 772-9:1998 BS EN 772-9:1998. Methods of test for masonry units. Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
BS EN 13250:2001 BS EN 13250:2001. Geotextiles and geotextile-related products. Characteristics required for use in the construction of railways
BS EN 13251:2001 BS EN 13251:2001. Geotextiles and geotextile-related products. Characteristics required for use in earthworks, foundations and retaining structures
BS EN 13252:2001 BS EN 13252:2001. Geotextiles and geotextile-related products. Characteristics required for use in drainage systems
BS EN 13253:2001 BS EN 13253:2001. Geotextiles and geotextile-related products. Characteristics required for use in erosion control works (coastal protection, bank revetments)
BS EN 13255:2001 BS EN 13255:2001. Geotextiles and geotextile-related products. Characteristics required for use in the construction of canals
BS EN 60598-2-20:1998 BS EN 60598-2-20:1998. Luminaires. Particular requirements. Lighting chains
BS EN 12300:1999 BS EN 12300:1999. Cryogenic vessels. Cleanliness for cryogenic service
BS EN 10087:1999 BS EN 10087:1999. Free cutting steels. Technical delivery conditions for semi-finished products, hot rolled bars and rods
BS 5839-8:1998 BS 5839-8:1998. Fire detection and fire alarm systems for buildings. Code of practice for the design, installation, commissioning, and maintenance of voice alarm systems
BS EN ISO 10555-1:1997 BS EN ISO 10555-1:1997. Sterile, single-use intravascular catheters. General requirements
BS EN 818-1:1996+A1:2008 BS EN 818-1:1996+A1:2008. Short link chain for lifting purposes. Safety . General conditions of acceptance
BS EN 818-2:1996+A1:2008 BS EN 818-2:1996+A1:2008. Short link chain for lifting purposes. Safety. Medium tolerance chain for chain slings. Grade 8
BS EN 818-3:1999+A1:2008 BS EN 818-3:1999+A1:2008. Short link chain for lifting purposes. Safety. Medium tolerance chain for chain slings. Grade 4
BS EN 818-4:1996+A1:2008 BS EN 818-4:1996+A1:2008. Short link chain for lifting purposes. Safety . Chain slings - Grade 8
BS EN 818-5:1999+A1:2008 BS EN 818-5:1999+A1:2008. Short link chain for lifting purposes. Safety . Chain slings - Grade 4
BS EN 818-6:2000+A1:2008 BS EN 818-6:2000+A1:2008. Short link chain for lifting purposes. Safety. Chain slings. Specification for information for use and maintenance to be provided by the manufacturer
BS 2X 32:1998 BS 2X 32:1998. Specification for pre-treatment etch primer for aerospace purposes
BS EN 50018:2000 BS EN 50018:2000. Electrical apparatus for potentially explosive atmospheres. Flameproof enclosure 'd'
BS EN ISO 6975:2005 BS EN ISO 6975:2005. Natural gas. Extended analysis. Gas chromatographic method
BS EN ISO 12213-3:2005 BS EN ISO 12213-3:2005. Natural gas. Calculation of compression factor. Calculation using physical properties
BS EN ISO 13686:2005 BS EN ISO 13686:2005. Natural gas. Quality designation
BS EN 1097-2:1998 BS EN 1097-2:1998. Tests for mechanical and physical properties of aggregates. Methods for the determination of resistance to fragmentation
BS EN ISO 887:2000 BS EN ISO 887:2000. Plain washers for metric bolts, screws and nuts for general purposes. General plan
BS EN 60630:1999 BS EN 60630:1999. Maximum lamp outlines for incandescent lamps
BS EN 10243-1:1999 BS EN 10243-1:1999. Steel die forgings. Tolerances on dimensions. Drop and vertical press forgings
BS EN 10243-2:1999 BS EN 10243-2:1999. Steel die forgings. Tolerances on dimensions. Upset forgings made on horizontal forging machines
BS EN 1080:1997 BS EN 1080:1997. Impact protection helmets for young children
BS EN 50021:1999 BS EN 50021:1999. Electrical apparatus for potentially explosive atmospheres. Type of prot ection "n"
BS EN 60872-1:1999, IEC 60872-1:1998 BS EN 60872-1:1999, IEC 60872-1:1998. Maritime navigation and radiocommunication equipment and systems. Radarp lotting aids. Automatic radar plotting aids (ARPA).
BS EN 473:2000 BS EN 473:2000. Non-destructive testing. Qualification and certification of NDT personne l. General principles
BS EN 1124-1:1999 BS EN 1124-1:1999. Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Requirements, testing, quality control
BS EN 30-1-1:1998 BS EN 30-1-1:1998. Domestic cooking appliances burning gas. Safety. General
BS EN 10084:1998 BS EN 10084:1998. Case hardening steels. Technical delivery conditions
BS EN 12195-2:2001 BS EN 12195-2:2001. Load restraint assemblies on road vehicles. Safety. Web lashing made from man-made fibres
BS EN 60269-1:1999, IEC 60269-1:1998 BS EN 60269-1:1999, IEC 60269-1:1998. Low-voltage fuses. General requirements
BS EN 12546-1:2000 BS EN 12546-1:2000. Materials and articles in contact with foodstuffs. Insulated containers for domestic use. Specification for vacuum ware, insulated flasks and jugs
BS EN 13084-1:2000 BS EN 13084-1:2000. Free-standing industrial chimneys. Free-standing industrial chimneys. General requirements
BS EN 50019:2000 BS EN 50019:2000. Electrical apparatus for potentially explosive atmospheres. Increased safety 'e'
BS EN ISO 13690:2007 BS EN ISO 13690:2007. Cereals, pulses and milled products. Sampling of static batches
BS ISO 3874:1997 BS ISO 3874:1997. Series 1 freight containers. Handling and securing
BS ISO 13678:2000 BS ISO 13678:2000. Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing and line pipe
BS EN ISO 15310:2005 BS EN ISO 15310:2005. Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method
BS EN ISO 12213-1:2005 BS EN ISO 12213-1:2005. Natural gas. Calculation of compression factors. Introduction and guidelines
BS EN ISO 12213-2:2005 BS EN ISO 12213-2:2005. Natural gas. Calculation of compression factors. Calculation using a molar-composition analysis
BS ISO/IEC 16022:2000 BS ISO/IEC 16022:2000. Information technology. International symbology specification. Data matrix
BS EN ISO 13443:2005 BS EN ISO 13443:2005. Natural gas. Standard reference conditions
BS EN 50117-3:1996 BS EN 50117-3:1996. Coaxial cables used in cabled distribution networks. Sectional specification for outdoor drop cables
ERROR ERROR.
BS EN ISO 179-1:2001 BS EN ISO 179-1:2001. Plastics. Determination of Charpy impact properties. Non-instrumented impact test
BS EN 1562:1997 BS EN 1562:1997. Founding. Malleable cast irons
BS EN 206-1:2000 BS EN 206-1:2000. Concrete. Specification, performance, production and conformity
BS ISO 6196-10:1999 BS ISO 6196-10:1999. Micrographics. Vocabulary. Index
BS EN ISO 1307:1996 BS EN ISO 1307:1996. Rubber and plastics hoses for general-purpose industrial applications. Bore diameters and tolerances, and tolerances on length
BS EN 12525:2000 BS EN 12525:2000. Agricultural machinery. Front loaders. Safety
BS EN 60609-2:1999 BS EN 60609-2:1999. Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbines. Evaluation in Pelton turbines
BS EN 60730-2-1:1997 BS EN 60730-2-1:1997. Specification for automatic electrical controls for household and similar use. Particular requirements. Electrical controls for electrical household applianc
BS ISO 1629:1995+A1:2007 BS ISO 1629:1995+A1:2007. Rubber and lattices. Nomenclature
BS ISO 9276-1:1998, ISO 9276-1:1998 BS ISO 9276-1:1998, ISO 9276-1:1998. Representation of results of particle size analysis. Graphical representation
BS EN ISO 3822-1:1999+A1:2008 BS EN ISO 3822-1:1999+A1:2008. Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Method of measurement
BS EN 81-1:1998 BS EN 81-1:1998. Safety rules for the construction and installation of lifts. Electric lifts
BS EN 81-2:1998 BS EN 81-2:1998. Safety rules for the construction and installation of lifts. Hydraulic lifts
BS EN 55014-2:1997+A2:2008, CISPR 14-2:1997 BS EN 55014-2:1997+A2:2008, CISPR 14-2:1997. Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Imm
BS 6911-10:1996, ISO 10532:1995 BS 6911-10:1996, ISO 10532:1995. Testing earth-moving machinery. Machine-mounted retrieval device. Performance requirements
BS EN ISO 4507:2007 BS EN ISO 4507:2007. Sintered ferrous materials, carburized or carbonitrided. Determination and verification of case-hardening depth by a micro-hardness test
BS EN 1015-1:1999 BS EN 1015-1:1999. Methods of test for mortar for masonry. Determination of particle size distribution (by sieve analysis)
BS EN 1015-2:1999 BS EN 1015-2:1999. Methods of test for mortar for masonry. Bulk sampling of mortars and preparation of test mortars
BS EN 1015-3:1999 BS EN 1015-3:1999. Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by flow table)
BS EN 1015-6:1999 BS EN 1015-6:1999. Methods of test for mortar for masonry. Determination of bulk density of fresh mortar
BS EN 1015-9:1999 BS EN 1015-9:1999. Methods of test for mortar for masonry. Determination of workable life and correction time of fresh mortar
BS EN 1015-10:1999 BS EN 1015-10:1999. Methods of test for mortar for masonry. Determination of dry bulk density of hardened mortar
BS EN 1015-11:1999 BS EN 1015-11:1999. Methods of test for mortar for masonry. Determination of flexural and compressive strength of hardened mortar
BS EN 60705:1999, IEC 60705:1999 BS EN 60705:1999, IEC 60705:1999. Household microwave ovens. Methods for measuring performance
BS EN 10280:2001+A1:2007 BS EN 10280:2001+A1:2007. Magnetic materials. Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester
BS 5400-3:2000 BS 5400-3:2000. Steel, concrete and composite bridges. Code of practice for design of steel bridges
BS EN 62019:1999, IEC 62019:1999 BS EN 62019:1999, IEC 62019:1999. Electrical accessories. Circuit-breakers and similar equipment for household use. Auxiliary contact units
PAS 23-1:1999 PAS 23-1:1999. General performance requirements for door assemblies. Single leaf, external door assemblies to dwellings
BS EN 12259-1:1999 BS EN 12259-1:1999. Fixed firefighting systems. Components for sprinkler and water spray systems. Sprinklers
BS EN 326-2:2000 BS EN 326-2:2000. Wood-based panels. Sampling, cutting and inspection. Quality control in the factory
BS EN 50117-4:1996 BS EN 50117-4:1996. Coaxial cables used in cabled distribution networks. Sectional specification for distribution and trunk cables
BS EN ISO 3543:2001 BS EN ISO 3543:2001. Metallic and non-metallic coatings. Measurement of thickness. Beta backscatter method
BS EN ISO 12947-1:1998 BS EN ISO 12947-1:1998. Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Martindale abrasion testing apparatus
BS EN ISO 12947-2:1998 BS EN ISO 12947-2:1998. Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Determination of specimen breakdown
BS EN ISO 12947-3:1998 BS EN ISO 12947-3:1998. Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Determination of mass loss
BS EN ISO 12947-4:1998 BS EN ISO 12947-4:1998. Textiles. Determination of the abrasion resistance of fabrics by the Martindale method. Assessment of appearance change
BS ISO 13216-1:1999 BS ISO 13216-1:1999. Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems. Seat bight anchorages and attachments
BS EN ISO 11833-2:2006 BS EN ISO 11833-2:2006. Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics. Sheets of thickness less than 1 mm
BS EN ISO 11979-2:2000 BS EN ISO 11979-2:2000. Ophthalmic implants. Intraocular lenses. Optical properties and test methods
BS EN ISO 13431:1999 BS EN ISO 13431:1999. Geotextiles and geotextiles-related products. Determination of tensile creep and creep rupture behaviour
BS EN 61340-5-1:2001 BS EN 61340-5-1:2001. Electrostatics. Protection of electronic devices from electrostatic phenomena. General requirements
BS EN ISO 3582:2001 BS EN ISO 3582:2001. Flexible cellular polymeric materials. Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
BS EN ISO 12958:1999 BS EN ISO 12958:1999. Geotextiles and geotextile-related products. Determination of water flow capacity in their plane
BS EN ISO 1856:2001 BS EN ISO 1856:2001. Flexible cellular polymeric materials. Determination of compression set
BS ISO 13362:2000 BS ISO 13362:2000. Flexible cellular polymeric materials. Determination of compression set under humid conditions
BS ISO 11752:2000 BS ISO 11752:2000. Flexible cellular polymeric materials. Moulded and extruded sponge or expanded cellular rubber products. Compressibility test on finished parts
BS EN ISO 11502:2005, ISO 11502:1995 BS EN ISO 11502:2005, ISO 11502:1995. Plastics. Film and sheeting. Determination of blocking resistance
BS EN 303-3:1999 BS EN 303-3:1999. Heating boilers. Gas-fired central heating boilers. Assembly comprising a boiler body and a forced draught burner
BS EN ISO 13468-2:2006 BS EN ISO 13468-2:2006. Plastics. Determination of the total luminous transmittance of transparent materials. Double-beam instrument
BS 7655-1.2:1997 BS 7655-1.2:1997. Specification for insulating and sheathing materials for cables. Cross-linked elastomeric insulating compounds. General 90°C application
BS 7655-1.5:2000 BS 7655-1.5:2000. Specification for insulating and sheathing materials for cables. Cross-linked elastomeric insulating compounds. Flame retardant composites
BS EN 60983:1996, IEC 60983:1995 BS EN 60983:1996, IEC 60983:1995. Specification for miniature lamps
BS 7655-2.4:2000 BS 7655-2.4:2000. Specification for insulating and sheathing materials for cables. Cross-linked elastomeric sheathing compounds. Welding cable covering
BS 7655-2.6:2000 BS 7655-2.6:2000. Specification for insulating and sheathing materials for cables. Cross-linked elastomeric sheathing compounds. Sheathing compounds for ships' wiring and offshore app
BS 7655-6.1:1997 BS 7655-6.1:1997. Specification for insulating and sheathing materials for cables. Thermoplastic sheathing compounds having low emission of corrosive gases, and suitable for use in ca
BS 7655-10.1:2000 BS 7655-10.1:2000. Specification for insulating and sheathing materials for cables. Polyethylene sheathing compounds. Thermoplastic medium density polyethylene (MDPE) sheathing compo
BS EN ISO 6888-1:1999 BS EN ISO 6888-1:1999. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other
BS EN 624:2000 BS EN 624:2000. Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats
BS EN 12094-7:2001 BS EN 12094-7:2001. Fixed firefighting systems. Components for gas extinguishing systems. Requirements and test methods for nozzles for CO2 systems
BS ISO 9802:1996 BS ISO 9802:1996. Raw optical glass. Vocabulary
BS EN 1563:1997 BS EN 1563:1997. Founding. Spheroidal graphite cast iron
BS 6500:2000 BS 6500:2000. Electric cables. Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments
BS EN 1859:2000 BS EN 1859:2000. Chimneys. Metal chimneys. Test methods
BS ISO 6916-1:1995 BS ISO 6916-1:1995. Flexible cellular polymeric materials. Sponge and expanded cellular rubber products. Specification. Sheeting
BS EN ISO 8442-2:1998 BS EN ISO 8442-2:1998. Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for stainless steel and silver-plated cutlery
BS EN ISO 14910-1:2006 BS EN ISO 14910-1:2006. Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specifications
BS EN ISO 14910-2:2006 BS EN ISO 14910-2:2006. Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Preparation of test specimens and determination of pro
BS EN ISO 10283:2006 BS EN ISO 10283:2006. Binders for paints. Determination of monomeric diisocyanates in polyisocyanate resins
BS EN 12746:2000 BS EN 12746:2000. Footwear. Test methods for insoles and insocks. Water absorption and desorption
BS EN 1158:1997 BS EN 1158:1997. Building hardware. Door coordinator devices. Requirements and test methods
BS EN 1155:1997 BS EN 1155:1997. Building hardware. Electrically powered hold-open devices for swing doors. Requirements and test methods
BS EN ISO 12956:1999 BS EN ISO 12956:1999. Geotextiles and geotextile-related products. Determination of the characteristic opening size
BS EN 61580-4:1998, IEC 61580-4:1997 BS EN 61580-4:1998, IEC 61580-4:1997. Methods of measurement for waveguides. Attenuation of waveguide and waveguide assemblies
BS EN ISO 3928:2006 BS EN ISO 3928:2006. Sintered metal materials, excluding hardmetals. Fatigue test pieces
BS EN 1060-3:1997 BS EN 1060-3:1997. Non-invasive sphygmomanometers. Supplementary requirements for electro-mechanical blood pressure measuring systems
BS EN 1515-1:2000 BS EN 1515-1:2000. Flanges and their joints. Bolting. Selection of bolting
BS ISO 1496-2:1996 BS ISO 1496-2:1996. Series 1 freight containers. Specification and testing. Thermal containers
BS 5950-5:1998 BS 5950-5:1998. Structural use of steelwork in building. Code of practice for design of cold formed thin gauge sections
BS EN 61217:1996+A2:2008, IEC 61217:1996 BS EN 61217:1996+A2:2008, IEC 61217:1996. Radiotherapy equipment. Coordinates, movements and scales
BS ISO 13450:1996 BS ISO 13450:1996. Photography. 110-size cartridge, film and backing paper. Dimensions
BS EN 1970:2000 BS EN 1970:2000. Adjustable beds for disabled persons. Requirements and test methods
BS EN 54-7:2001 BS EN 54-7:2001. Fire detection and fire alarm systems. Smoke detectors. Point detectors using scattered light, transmitted light or ionization
BS EN 1154:1997 BS EN 1154:1997. Building hardware. Controlled door closing devices. Requirements and test methods
BS EN 60730-2-18:1999, IEC 60730-2-18:1997 BS EN 60730-2-18:1999, IEC 60730-2-18:1997. Automatic electrical controls for household and similar use. Particular requirements for automatic electrical wat
BS EN 12548:1999 BS EN 12548:1999. Lead and alloys. Lead alloy ingots for electric cable sheathing and for sleeves
DD CLC/TS 60034-18-34:2004, IEC TS 60034-18-34:2000 DD CLC/TS 60034-18-34:2004, IEC TS 60034-18-34:2000. Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for
BS EN 60938-1:2000, IEC 60938-1:1999 BS EN 60938-1:2000, IEC 60938-1:1999. Fixed inductors for electromagnetic interference suppression. Generic specification
BS EN 12430:1998 BS EN 12430:1998. Thermal insulating products for building applications. Determination of behaviour under point load
BS EN 1604:1996 BS EN 1604:1996. Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions
BS EN 1605:1997 BS EN 1605:1997. Thermal insulating products for building applications. Determination of deformation under specified compressive load and temperature conditions
BS EN 1606:1997 BS EN 1606:1997. Thermal insulating products for building applications. Determination of compressive creep
BS EN 1609:1997 BS EN 1609:1997. Thermal insulating products for building applications. Determination of dimensional short term water absorption by partial immersion
BS EN 12087:1997 BS EN 12087:1997. Thermal insulating products for building applications. Determination of long term water absorption by immersion
BS EN 12431:1998 BS EN 12431:1998. Thermal insulating products for building applications. Determination of thickness for floating floor insulating products
BS EN 250:2000 BS EN 250:2000. Respiratory equipment. Open-circuit self-contained compressed air diving apparatus. Requirements, testing, marking
BS EN 1425:2000, BS 2000-457:2000 BS EN 1425:2000, BS 2000-457:2000. Methods of test for petroleum and its products. Bitumen and bituminous binders. Characterization of perceptible properties
BS EN 1463-1:1998 BS EN 1463-1:1998. Road marking materials. Retroreflecting road studs. Initial performance requirements
BS EN 1463-2:2000 BS EN 1463-2:2000. Road marking materials. Retroreflecting road studs. Road test performance specifications
BS EN 60669-1:2000+A2:2008, BS 3676-1:2000 BS EN 60669-1:2000+A2:2008, BS 3676-1:2000. Switches for household and similar fixed-electrical installations. General requirements
BS EN 60938-2:2000, IEC 60938-2:1999 BS EN 60938-2:2000, IEC 60938-2:1999. Fixed inductors for electromagnetic interference suppression. Sectional specification
BS EN 61000-3-2:2001, IEC 61000-3-2:2000 BS EN 61000-3-2:2001, IEC 61000-3-2:2000. Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current up to and
BS EN 12255-3:2000 BS EN 12255-3:2000. Wastewater treatment plants. Preliminary treatment
BS ISO 16028:1999 BS ISO 16028:1999. Hydraulic fluid power. Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar). Specifications
BS 4N 100-1:1999 BS 4N 100-1:1999. Aircraft oxygen systems and equipment. Design and installation
BS 4875-8:1998 BS 4875-8:1998. Furniture. Strength and stability of furniture. Methods for determination of stability of non-domestic storage furniture
BS ISO TR 10064-3:1996 BS ISO TR 10064-3:1996. Code of inspection practice. Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
BS ISO/TR 10064-4:1998 BS ISO/TR 10064-4:1998. Code of inspection practice. Recommendations relative to surface texture and tooth contact pattern checking
BS ISO TR 10064-1:1992 BS ISO TR 10064-1:1992. Code of inspection practice. Inspection of corresponding flanks of gear teeth
BS EN 197-1:2000 BS EN 197-1:2000. Cement. Composition, specifications and conformity criteria for common cements
BS EN 846-8:2000 BS EN 846-8:2000. Methods of test for ancillary components for masonry. Determination of load capacity and load-deflection characteristics of joist hangers
BS EN 26:1998 BS EN 26:1998. Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
BS EN 1251-2:2000 BS EN 1251-2:2000. Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1000 litres volume. Design, fabrication, inspection and testing
BS ISO TR 10064-2:1996 BS ISO TR 10064-2:1996. Code of inspection practice. Inspection related to radial composite deviations, runout, tooth thickness and backlash
BS EN 50126-1:1999 BS EN 50126-1:1999. Railway applications. The specification and demonstration of reliability, availability, maintainability and safety (RAMS). Basic requirements and generic process
BS 8110-1:1997 BS 8110-1:1997. Structural use of concrete. Code of practice for design and construction
BS EN 60404-4:1997+A2:2008 BS EN 60404-4:1997+A2:2008. Magnetic materials. Methods of measurement of d.c. magnetic properties of magnetically soft materials
BS 2782-3:Method 323B:1996, ISO 6721-5:1996 BS 2782-3:Method 323B:1996, ISO 6721-5:1996. Methods of testing plastics. Mechanical properties. Flexural vibration. Non-resonance method
BS 2782-3:Method 323C:1996, ISO 6721-6:1996 BS 2782-3:Method 323C:1996, ISO 6721-6:1996. Methods of testing plastics. Mechanical properties. Shear vibration. Non-resonance method
BS 2782-3:Method 323D:1996, ISO 6721-7:1996 BS 2782-3:Method 323D:1996, ISO 6721-7:1996. Methods of testing plastics. Mechanical properties. Torsional vibration. Non-resonance method
BS ISO 15072:1999 BS ISO 15072:1999. Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A
BS EN ISO 11997-2:2006, BS 3900-F19:2006 BS EN ISO 11997-2:2006, BS 3900-F19:2006. Paints and varnishes. Determination of resistance to cyclic corrosion conditions. Wet (salt fog)/dry/humidity/UV ligh
BS EN ISO 14680-1:2006, BS 3900-A26:2006 BS EN ISO 14680-1:2006, BS 3900-A26:2006. Paints and varnishes. Determination of pigment content. Centrifuge method
BS EN ISO 7784-1:2006, BS 3900-E14:2006 BS EN ISO 7784-1:2006, BS 3900-E14:2006. Paints and varnishes. Determination of resistance to abrasion. Rotating abrasive-paper-covered wheel method
BS EN ISO 7784-2:2006, BS 3900-E15:2006 BS EN ISO 7784-2:2006, BS 3900-E15:2006. Paints and varnishes. Determination of resistance to abrasion. Rotating abrasive rubber wheel method
BS EN ISO 2884-1:2006, BS 3900-A7-1:2006 BS EN ISO 2884-1:2006, BS 3900-A7-1:2006. Paints and varnishes. Determination of viscosity using rotary viscometers. Cone-and-plate viscometer operated at a hi
BS EN ISO 13628-9:2006 BS EN ISO 13628-9:2006. Petroleum and natural gas industries. Design and operation of subsea production systems. Remotely operated tool (ROT) intervention systems
BS EN ISO 15663-1:2006 BS EN ISO 15663-1:2006. Petroleum and natural gas industries. Life cycle costing. Methodology
BS EN 55022:1998, CISPR 22:1997 BS EN 55022:1998, CISPR 22:1997. Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
PAS 24-1:1999 PAS 24-1:1999. Enhanced security performance requirements for door assemblies. Single and double leaf, hinged external door assemblies to dwellings
BS EN ISO 12137-1:2006, BS 3900-E17:1997 BS EN ISO 12137-1:2006, BS 3900-E17:1997. Paints and varnishes. Determination of mar resistance. Method using a curved stylus
BS EN ISO 12137-2:2006, BS 3900-E18:1997 BS EN ISO 12137-2:2006, BS 3900-E18:1997. Paints and varnishes. Determination of mar resistance. Method using a pointed stylus
BS EN ISO 7784-3:2006, BS 3900-E16:2000 BS EN ISO 7784-3:2006, BS 3900-E16:2000. Paints and varnishes. Determination of resistance to abrasion. Reciprocating test panel method
BS EN ISO 14680-3:2006 BS EN ISO 14680-3:2006. Paints and varnishes. determination of pigment content. Filtration method
BS EN 12056-3:2000 BS EN 12056-3:2000. Gravity drainage systems inside buildings. Roof drainage, layout and calculation
BS EN 55024:1998+A2:2003, CISPR 24:1997 BS EN 55024:1998+A2:2003, CISPR 24:1997. Information technology equipment. Immunity characteristics. Limits and methods of measurement
BS EN ISO 6141:2006, ISO 6141:2000 BS EN ISO 6141:2006, ISO 6141:2000. Gas analysis. Requirements for certificates for calibration gases and gas mixtures
BS ISO 6953-1:2000 BS ISO 6953-1:2000. Pneumatic fluid power. Compressed air pressure regulators and filter-regulators. Main characteristics to be included in literature from suppliers and product-mar
BS EN ISO 10715:2001, BS 3156-11.0.1:2001 BS EN ISO 10715:2001, BS 3156-11.0.1:2001. Natural gas. Sampling guidelines
BS EN 60404-2:1998+A1:2008 BS EN 60404-2:1998+A1:2008. Magnetic materials. Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame
BS EN 1662:1998 BS EN 1662:1998. Hexagon bolts with flange. Small series
BS EN 1665:1997 BS EN 1665:1997. Hexagon bolts with flange. Heavy series
BS EN ISO 14683:1999 BS EN ISO 14683:1999. Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values
BS EN ISO 12676:2003 BS EN ISO 12676:2003. Refractory products. Determination of resistance to carbon monoxide
BS 6SP 4:2000 BS 6SP 4:2000. Pins headed, plain shank, drilled, steel alloy and corrosion resisting steel with a strength class 880/1080 MPa
BS EN 50090-2-2:1996+A2:2007 BS EN 50090-2-2:1996+A2:2007. Home and building electronic systems (HBES). System overview. General technical requirements
BS EN 50144-1:1999 BS EN 50144-1:1999. Safety of hand-held electric motor operated tools. General requirements
BS EN 1811:1998+A1:2008 BS EN 1811:1998+A1:2008. Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
BS EN 1457:1999 BS EN 1457:1999. Chimneys. Clay/ceramic flue liners. Requirements and test methods
BS EN ISO 4823:2001 BS EN ISO 4823:2001. Dentistry. Elastomeric impression materials
BS EN ISO 11542-2:1998 BS EN ISO 11542-2:1998. Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials. Preparation of test specimens and determination of propert
BS EN 60700-1:1998+A2:2008, IEC 60700-1:1998 BS EN 60700-1:1998+A2:2008, IEC 60700-1:1998. Thyristor valves for high-voltage direct current (HVDC) power transmission. Electrical testing
BS EN 853:1997 BS EN 853:1997. Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification
BS EN 12254:1998+A2:2008 BS EN 12254:1998+A2:2008. Screens for laser working places. Safety requirements and testing
BS EN ISO 6330:2001+A1:2009 BS EN ISO 6330:2001+A1:2009. Textiles. Domestic washing and drying procedures for textile testing
BS ISO/TR 15070:1996 BS ISO/TR 15070:1996. Series 1 freight containers. Rationale for design and structural test criteria
BS EN 60599:1999, IEC 60599:1999 BS EN 60599:1999, IEC 60599:1999. Mineral oil-impregnated electrical equipment in service. Guide to the interpretation of dissolved and free gases analysis
BS EN 673:1998 BS EN 673:1998. Glass in building. Determination of thermal transmittance (U value). Calculation method
BS 5467:1997+A3:2008 BS 5467:1997+A3:2008. Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V
BS 6724:1997+A3:2008 BS 6724:1997+A3:2008. Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases when a
BS EN 50083-7:1996+A1:2000 BS EN 50083-7:1996+A1:2000. Cable networks for television signals, sound signals and interactive services. System performance
BS EN 50088:1996 BS EN 50088:1996. Safety of electric toys
BS EN 1492-2:2000+A1:2008 BS EN 1492-2:2000+A1:2008. Textile slings. Safety. Roundslings, made of man-made fibres, for general purpose use
BS EN 50122-1:1998 BS EN 50122-1:1998. Railway applications. Fixed installations. Protective provisions relating to electrical safety and earthing
BS EN 60335-2-58:1997 BS EN 60335-2-58:1997. Safety of household and similar electrical appliances. Particular requirements. Commercial electric dishwashing machines
BS EN 1037:1995+A1:2008 BS EN 1037:1995+A1:2008. Safety of machinery. Prevention of unexpected start-up
BS ISO 1100-2:1998 BS ISO 1100-2:1998. Measurement of liquid flow in open channels. Determination of the stage-discharge relation
BS EN ISO 10270:2008 BS EN ISO 10270:2008. Corrosion of metals and alloys. Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
BS EN ISO 11463:2008 BS EN ISO 11463:2008. Corrosion of metals and alloys. Evaluation of pitting corrosion
BS EN ISO 11782-1:2008 BS EN ISO 11782-1:2008. Corrosion of metals and alloys. Corrosion fatigue testing. Cycles to failure testing
BS EN ISO 11782-2:2008 BS EN ISO 11782-2:2008. Corrosion of metals and alloys. Corrosion fatigue testing. Crack propagation testing using precracked specimens
BS EN ISO 11846:2008 BS EN ISO 11846:2008. Corrosion of metals and alloys. Determination of resistance to intergranular corrosion of solution heat- treatable aluminium alloys
BS EN ISO 15324:2008 BS EN ISO 15324:2008. Corrosion of metals and alloys. Evaluation of stress corrosion cracking by the drop evaporation test
BS EN 61770:1999+A2:2006, IEC 61770:1998 BS EN 61770:1999+A2:2006, IEC 61770:1998. Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets
BS EN 286-1:1998+A2:2005 BS EN 286-1:1998+A2:2005. Simple unfired pressure vessels designed to contain air or nitrogen. Pressure vessels for general purposes
BS EN 1492-1:2000+A1:2008 BS EN 1492-1:2000+A1:2008. Textile slings. Safety. Flat woven webbing slings made of man-made fibres for general purpose use
BS EN 12644-1:2001+A1:2008 BS EN 12644-1:2001+A1:2008. Cranes. Information for use and testing. Instructions
BS EN 12644-2:2000+A1:2008 BS EN 12644-2:2000+A1:2008. Cranes. Information for use and testing. Marking
BS EN ISO 13694:2000 BS EN ISO 13694:2000. Optics and optical instruments. Lasers and laser-related equipment. Test methods for laser beam power (energy) density distribution
BS EN ISO 13703:2000 BS EN ISO 13703:2000. Petroleum and natural gas industries. Design and installation of piping systems on offshore production platforms
BS EN 613:2001 BS EN 613:2001. Independent gas-fired convection heaters
BS EN 574:1996+A1:2008 BS EN 574:1996+A1:2008. Safety of machinery. Two-hand control devices. Functional aspects. Principles for design
BS EN 626-2:1996+A1:2008 BS EN 626-2:1996+A1:2008. Safety of machinery. Reduction of risk to health from hazardous substances emitted by machinery. Methodology leading to verification procedures
BS EN 1093-4:1996+A1:2008 BS EN 1093-4:1996+A1:2008. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Capture efficiency of an exhaust system. Tracer method
BS ISO 11843-2:2000 BS ISO 11843-2:2000. Capability of detection. Methodology in the linear calibration case
BS EN ISO 2320:1998 BS EN ISO 2320:1998. Prevailing torque type steel hexagon nuts. Mechanical and performance properties
BS EN 1114-2:1998+A1:2008 BS EN 1114-2:1998+A1:2008. Plastics and rubber machines. Extruders and extrusion lines . Safety requirements for die face pelletisers
BS EN 1417:1996+A1:2008 BS EN 1417:1996+A1:2008. Plastics and rubber machines. Two roll mills. Safety requirements
BS EN 12301:2000+A1:2008 BS EN 12301:2000+A1:2008. Plastics and rubber machines. Calenders. Safety requirements
BS EN 1612-1:1997+A1:2008 BS EN 1612-1:1997+A1:2008. Plastics and rubber machines. Reaction moulding machines. Safety requirements for metering and mixing units
BS EN 1612-2:2000+A1:2008 BS EN 1612-2:2000+A1:2008. Plastics and rubber machines. Reaction moulding machines. Safety requirements for reaction moulding plant
BS EN 61466-1:1997, IEC 61466-1:1997 BS EN 61466-1:1997, IEC 61466-1:1997. Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V. Standard strength classes an
BS EN ISO 2818:1996 BS EN ISO 2818:1996. Plastics. Preparation of test specimens by machining
BS EN 1550:1997+A1:2008 BS EN 1550:1997+A1:2008. Machine-tools safety. Safety requirements for the design and construction of work holding chucks
BS EN 1093-6:1998+A1:2008 BS EN 1093-6:1998+A1:2008. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Separation efficiency by mass, unducted outlet
BS EN 1093-7:1998+A1:2008 BS EN 1093-7:1998+A1:2008. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Separation efficiency by mass, ducted outlet
BS EN 1093-8:1998+A1:2008 BS EN 1093-8:1998+A1:2008. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Pollutant concentration parameter, test bench method
BS EN 1093-9:1998+A1:2008 BS EN 1093-9:1998+A1:2008. Safety of machinery. Evaluation of the emission of airborne hazardous substances. Pollutant concentration parameter, room method
BS EN 999:1998+A1:2008 BS EN 999:1998+A1:2008. Safety of machinery. The positioning of protective equipment in respect of approach speeds of parts of the human body
BS EN 61000-4-27:2000+A1:2009, IEC 61000-4-27:2000 BS EN 61000-4-27:2000+A1:2009, IEC 61000-4-27:2000. Electromagnetic compatibility (EMC). Testing and measurement techniques. Unbalance, immunity test
BS EN 61000-4-28:2000+A2:2009 BS EN 61000-4-28:2000+A2:2009. Electromagnetic compatibility (EMC). Testing and measurement techniques. Variation of power frequency, immunity test for equipment with inp
BS EN 1526:1997+A1:2008 BS EN 1526:1997+A1:2008. Safety of industrial trucks. Additional requirements for automated functions on trucks
BS EN 1265:1999+A1:2008 BS EN 1265:1999+A1:2008. Safety of machinery. Noise test code for foundry machines and equipment
BS EN 1299:1997+A1:2008 BS EN 1299:1997+A1:2008. Mechanical vibration and shock. Vibration isolation of Machines. Information for the application of source isolation
BS 7919:2001 BS 7919:2001. Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments
BS EN 1493:1999+A1:2008 BS EN 1493:1999+A1:2008. Vehicle lifts
BS EN 1494:2000+A1:2008 BS EN 1494:2000+A1:2008. Mobile or movable jacks and associated lifting equipment
BS 5930:1999 BS 5930:1999. Code of practice for site investigations
BS EN 81-3:2000+A1:2008 BS EN 81-3:2000+A1:2008. Safety rules for the construction and installation of lifts. Electric and hydraulic service lifts
BS EN 815:1996+A2:2008 BS EN 815:1996+A2:2008. Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock
BS EN 12198-1:2000+A1:2008 BS EN 12198-1:2000+A1:2008. Safety of machinery. Assessment and reduction of risks arising from radiation emitted by machinery. General principles
BS EN 982:1996+A1:2008 BS EN 982:1996+A1:2008. Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics
BS EN 983:1996+A1:2008 BS EN 983:1996+A1:2008. Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics
BS EN 877:1999+A1:2006 BS EN 877:1999+A1:2006. Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance
BS EN 792-1:2000+A1:2008 BS EN 792-1:2000+A1:2008. Hand-held non-electric power tools. Safety requirements. Assembly power tools for non-threaded mechanical fasteners
BS EN 792-2:2000+A1:2008 BS EN 792-2:2000+A1:2008. Hand-held non-electric power tools. Safety requirements. Cutting-off and crimping power tools
BS EN 792-3:2000+A1:2008 BS EN 792-3:2000+A1:2008. Hand-held non-electric power tools. Safety requirements. Drills and tappers
BS EN 792-4:2000+A1:2008 BS EN 792-4:2000+A1:2008. Hand-held non-electric power tools. Safety requirements. Non-rotary percussive power tools
BS EN 792-5:2000+A1:2008 BS EN 792-5:2000+A1:2008. Hand-held non-electric power tools. Safety requirements. Rotary percussive drills
BS EN 792-6:2000+A1:2008 BS EN 792-6:2000+A1:2008. Hand-held non-electric power tools. Safety requirements. Assembly power tools for threaded fasteners
BS EN 792-8:2001+A1:2008 BS EN 792-8:2001+A1:2008. Hand-held non-electric power tools. Safety requirements. Sanders and polishers
BS EN 792-9:2001+A1:2008 BS EN 792-9:2001+A1:2008. Hand-held non-electric power tools. Safety requirements. Die grinders
BS EN 792-10:2000+A1:2008 BS EN 792-10:2000+A1:2008. Hand-held non-electric power tools. Safety requirements. Compression power tools
BS EN 792-11:2000+A1:2008 BS EN 792-11:2000+A1:2008. Hand-held non-electric power tools. Safety requirements. Nibblers and shears
BS EN 792-12:2000+A1:2008 BS EN 792-12:2000+A1:2008. Hand-held non-electric power tools. Safety requirements. Small circular, small oscillating and reciprocating saws
BS EN 792-13:2000+A1:2008 BS EN 792-13:2000+A1:2008. Hand-held non-electric power tools. Safety requirements. Fastener driving tools
BS EN 12549:1999+A1:2008 BS EN 12549:1999+A1:2008. Acoustics. Noise test code for fastener driving tools. Engineering method
BS EN 12547:1999+A1:2009 BS EN 12547:1999+A1:2009. Centrifuges. Common safety requirements
BS 6920-2-1:2000+A3:2008 BS 6920-2-1:2000+A3:2008. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the w
BS 6920-2.2.1:2000+A2:2008 BS 6920-2.2.1:2000+A2:2008. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of t
BS EN 1827:1999+A1:2009 BS EN 1827:1999+A1:2009. Respiratory protective devices. Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or part
BS EN 12941:1998+A2:2008 BS EN 12941:1998+A2:2008. Respiratory protective devices. Powered filtering devices incorporating a helmet or a hood. Requirements, testing, marking
BS EN 12942:1998+A2:2008 BS EN 12942:1998+A2:2008. Respiratory protective devices. Power assisted filtering devices incorporating full face masks, half masks or quarter masks. Requirements, testing, m
BS EN 953:1997+A1:2009 BS EN 953:1997+A1:2009. Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
BS EN 547-1:1996+A1:2008 BS EN 547-1:1996+A1:2008. Safety of machinery. Human body measurements. Principles for determining the dimensions required for openings for whole body access into machinery
BS EN 547-2:1996+A1:2008 BS EN 547-2:1996+A1:2008. Safety of machinery. Human body measurements. Principles for determining the dimensions required for access openings
BS EN 547-3:1996+A1:2008 BS EN 547-3:1996+A1:2008. Safety of machinery. Human body measurements. Anthropometric data
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
