BIS Standards Catalogue
BS IEC 61892-3:1999 BS IEC 61892-3:1999. Mobile and fixed offshore units. Electrical installations. Equipment
BS IEC 61892-6:1999 BS IEC 61892-6:1999. Mobile and fixed offshore units. Electrical installations. Installation
BS EN ISO 3164:2000, BS 6912-7:2000 BS EN ISO 3164:2000, BS 6912-7:2000. Earth-moving machinery. Laboratory evaluations of protective structures. Specifications for deflection-limiting volume
BS IEC 61892-7:1997 BS IEC 61892-7:1997. Mobile and fixed offshore units. Electrical installations. Hazardous areas
DD ENV 13729:2000 DD ENV 13729:2000. Health informatics. Secure user identification. Strong authentication microprocessor cards
BS EN ISO 3411:2000, BS 6912-28:2000 BS EN ISO 3411:2000, BS 6912-28:2000. Earth-moving machinery. Human physical dimensions of operators and minimum operator space envelope
KIT 25 KIT 25. Technical drawings. Tolerancing and dimensioning kit (BS 8888)
KIT 26 KIT 26. Technical drawings. Computer aided engineering kit (BS 8888)
KIT 24 KIT 24. Technical drawings. General principles kit (BS 8888)
BS EN 12424:2000 BS EN 12424:2000. Industrial, commercial and garage doors and gates. Resistance to wind load. Classification
BS EN 12425:2000 BS EN 12425:2000. Industrial, commercial and garage doors and gates. Resistance to water penetration. Classification
BS EN 12426:2000 BS EN 12426:2000. Industrial, commercial and garage doors and gates. Air permeability. Classification
BS EN 12427:2000 BS EN 12427:2000. Industrial, commercial and garage doors and gates. Air permeability. Test method
BS ISO 1795:2000 BS ISO 1795:2000. Rubber, raw natural and raw synthetic. Sampling and further preparative procedures
BS EN 12428:2000 BS EN 12428:2000. Industrial, commercial and garage doors and gates. Thermal transmittance. Requirements for the calculation
BS EN 12489:2000 BS EN 12489:2000. Industrial, commercial and garage doors and gates. Resistance to water penetration. Test method
BS ISO 15671:2000 BS ISO 15671:2000. Rubber and rubber additives. Determination of total sulfur content using an automatic analyser
BS EN ISO 3630-2:2001 BS EN ISO 3630-2:2001. Dental root-canal instruments. Enlargers
BS ISO 15672:2000 BS ISO 15672:2000. Rubber and rubber additives. Determination of total nitrogen content using an automatic analyser
BS EN ISO 1798:2000 BS EN ISO 1798:2000. Flexible cellular polymeric materials. Determination of tensile strength and elongation at break
BS EN ISO 2440:2000 BS EN ISO 2440:2000. Flexible and rigid cellular polymeric materials. Accelerated ageing tests
BS ISO 14887:2000 BS ISO 14887:2000. Sample preparation. Dispersing procedures for powders in liquids
BS EN 12874:2001 BS EN 12874:2001. Flame arresters. Performance requirements, test methods and limits for use
BS ISO 15371:2000 BS ISO 15371:2000. Ships and marine technology. Fire-extinguishing systems for protection of galley deep-fat cooking equipment. Fire tests
BS EN 60825-2:2000, IEC 60825-2:2000 BS EN 60825-2:2000, IEC 60825-2:2000. Safety of laser products. Safety of optical fibre communication systems
BS EN ISO 11254-1:2000 BS EN ISO 11254-1:2000. Lasers and laser-related equipment. Determination of laser-induced damage threshold of optical surfaces. 1-on-1 test
BS EN ISO 8028:2000 BS EN ISO 8028:2000. Rubber and/or plastics hose assemblies for airless paint spraying. Specification
BS EN 12814-5:2000 BS EN 12814-5:2000. Testing of welded joints of thermoplastics semi-finished products. Macroscopic examination
BS EN 13627:2000, BS 6912-6:2000 BS EN 13627:2000, BS 6912-6:2000. Earth-moving machinery. Falling-object protective structures. Laboratory tests and performance requirements
BS ISO 3374:2000 BS ISO 3374:2000. Reinforcement products. Mats and fabrics. Determination of mass per unit area
BS EN ISO 12005:2000 BS EN ISO 12005:2000. Lasers and laser-related equipment. Test methods for laser beam parameters. Polarization
BS EN 60086-1:1999 BS EN 60086-1:1999. Primary batteries. General
BS EN 12225:2000 BS EN 12225:2000. Geotextiles and geotextile-related products. Method for determining the microbiological resistance by a soil burial test
BS 7272-1:2000 BS 7272-1:2000. Writing and marking instruments. Specification for safety caps
BS EN 13277-1:2000 BS EN 13277-1:2000. Protective equipment for martial arts. General requirements and test methods
BS EN 13277-2:2000 BS EN 13277-2:2000. Protective equipment for martial arts. Additional requirements and test methods for instep protectors, shin protectors and forearm protectors
BS ISO 7341:2000 BS ISO 7341:2000. Banking. Nostro accounts reconciliation
BS EN 12350-1:2000 BS EN 12350-1:2000. Testing fresh concrete. Sampling
BS EN 12350-2:2000 BS EN 12350-2:2000. Testing fresh concrete. Slump test
BS EN 12350-5:2000 BS EN 12350-5:2000. Testing fresh concrete. Flow table test
BS EN 12350-3:2000 BS EN 12350-3:2000. Testing fresh concrete. Vebe test
BS EN 12350-6:2000 BS EN 12350-6:2000. Testing fresh concrete. Density
BS EN 12350-4:2000 BS EN 12350-4:2000. Testing fresh concrete. Degree of compactability
BS EN 60086-2:1998 BS EN 60086-2:1998. Primary batteries. Specification sheets
BS EN ISO 4066:2000 BS EN ISO 4066:2000. Construction drawings. Bar scheduling
BS 6043-3.6:2000, ISO 11713:2000 BS 6043-3.6:2000, ISO 11713:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of electrical resist
BS 6043-3.3:2000, ISO 12985-1:2000 BS 6043-3.3:2000, ISO 12985-1:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of the bulk dens
BS 6043-3.4:2000, ISO 12985-2:2000 BS 6043-3.4:2000, ISO 12985-2:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of the open poro
BS ISO 4720:1992 BS ISO 4720:1992. Essential oils. Nomenclature
BS ISO 3218:1976 BS ISO 3218:1976. Essential oils. Principles of nomenclature
PD ISO/TR 210:1999 PD ISO/TR 210:1999. Essential oils. General rules for packaging, conditioning and storage
PD ISO/TR 211:1999 PD ISO/TR 211:1999. Essential oils. General rules for labelling and marking of containers
BS ISO 212:1973 BS ISO 212:1973. Essential oils. Sampling
BS ISO 356:1996 BS ISO 356:1996. Essential oils. Preparation of test samples
BS EN 61709:2000, IEC 61709:1996 BS EN 61709:2000, IEC 61709:1996. Electronic components. Reliability. Reference conditions for failure rates and stress models for conversion
BS IEC 60300-3-10:2001 BS IEC 60300-3-10:2001. Dependability management. Application guide. Maintainability
DD ENV 927-2:2000 DD ENV 927-2:2000. Paints and varnishes. Coating materials and coating systems for exterior wood. Performance specification
BS EN 927-4:2000 BS EN 927-4:2000. Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of the water-vapour permeability
BS EN 927-5:2000 BS EN 927-5:2000. Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of the liquid water permeability
BS EN 60335-2-48:1997, IEC 60335-2-48:1995 BS EN 60335-2-48:1997, IEC 60335-2-48:1995. Specification for safety of household and similar electrical appliances. Particular requirements. Commercial elec
BS EN 12369-1:2001 BS EN 12369-1:2001. Wood-based panels. Characteristic values for structural design. OSB, particleboards and fireboards
BS ISO 11450:1999 BS ISO 11450:1999. Equipment for harvesting and conservation. Round balers. Terminology and commercial specifications
DISC PD 0014:2000 DISC PD 0014:2000. Guide to the evaluation of fieldbus protocols. Selecting the best fieldbus for your application
WD/DISC PD0014 FIELDBUS [DISKETTE] V2 WD/DISC PD0014 FIELDBUS [DISKETTE] V2.
BS IEC 61710:2000 BS IEC 61710:2000. Power law model. Goodness-of-fit tests and estimation methods
BS EN 60534-3-1:2000, IEC 60534-3-1:2000 BS EN 60534-3-1:2000, IEC 60534-3-1:2000. Industrial-process control valves. Dimensions. Face-to-face dimensions for flanged, two-way, globe-type, straight pat
BS ISO 230-5:2000 BS ISO 230-5:2000. Test code for machine tools. Determination of the noise emission
BS EN 1847:2001 BS EN 1847:2001. Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Methods for exposure to liquid chemicals including water
BS ISO 1998-6:2000 BS ISO 1998-6:2000. Petroleum industry. Terminology. Measurement
BS EN ISO 7787-2:2001 BS EN ISO 7787-2:2001. Dental rotary instruments. Cutters. Carbide laboratory cutters
BS EN 1877-1:2000 BS EN 1877-1:2000. Products and systems for the protection and repair of concrete structures. Test methods. Reactive functions related to epoxy resins. Determination of epoxy equival
BS EN 1877-2:2000 BS EN 1877-2:2000. Products and systems for the protection and repair of concrete structures. Test methods. Reactive functions related to epoxy resins. Determination of amine functio
BS EN 334:1999 BS EN 334:1999. Gas pressure regulators for inlet pressures up to 100 bar
BS ISO 1998-99:2000 BS ISO 1998-99:2000. Petroleum industry. Terminology. General and index
BS EN 1929-1:1998 BS EN 1929-1:1998. Basket trolleys. Requirements and tests for basket trolleys with or without a child carrying facility
BS EN ISO 3262-16:2000 BS EN ISO 3262-16:2000. Extenders for paints. Specifications and methods of test. Aluminium hydroxides
BS EN ISO 3262-21:2000 BS EN ISO 3262-21:2000. Extenders for paints. Specifications and methods of test. Silica sand (unground natural quartz)
BS ISO 13894-1:2000 BS ISO 13894-1:2000. High-pressure decorative laminates. Composite elements. Test methods
DD ENV 12837:2000 DD ENV 12837:2000. Paints and varnishes. Qualification of inspectors for corrosion protection of steel structures by protective paint systems
BS EN 13145:2001 BS EN 13145:2001. Railway applications. Track. Wood sleepers and bearers
BS IEC 61839:2000 BS IEC 61839:2000. Nuclear power plants. Design of control rooms. Functional analysis and assignment
BS ISO 6953-2:2000 BS ISO 6953-2:2000. Pneumatic fluid power. Compressed air pressure regulators and filter-regulators. Test methods to determine the main characteristics to be included in literature
BS ISO 10945:1994 BS ISO 10945:1994. Hydraulic fluid power. Gas-loaded accumulators. Dimensions of gas ports
BS EN 60146-2:2000, IEC 60146-2:1999 BS EN 60146-2:2000, IEC 60146-2:1999. Semiconductor convertors. General requirements and line commutated convertors. Self-commutated semiconductor converters inclu
BS EN ISO 3262-19:2000 BS EN ISO 3262-19:2000. Extenders for paints. Specifications and methods of test. Precipitated silica
BS EN ISO 3262-18:2000 BS EN ISO 3262-18:2000. Extenders for paints. Specifications and methods of test. Precipitated sodium aluminium silicate
BS EN ISO 3262-17:2000 BS EN ISO 3262-17:2000. Extenders for paints. Specifications and methods of test. Precipitated calcium silicate
BS EN ISO 3262-20:2000 BS EN ISO 3262-20:2000. Extenders for paints. Specifications and methods of test. Fumed silica
BS ISO 10299:2000 BS ISO 10299:2000. Aerospace. Rivets, solid. Material and metric series identification
BS EN ISO 11978:2000 BS EN ISO 11978:2000. Ophthalmic optics. Contact lenses and contact lens care products. Information supplied by the manufacturer
PD 6638:2000 PD 6638:2000. PNO-ISC specification number 003. C7 interconnect signalling connection control part (SCCP)
BS ISO 15217:2000 BS ISO 15217:2000. Fluid power systems and components. 16mm square electrical connector with earth contact. Characteristics and requirements
BS ISO 15871:2000 BS ISO 15871:2000. Industrial trucks. Specification for indicator lights for container handling and grappler arm operations
BS EN 593:1998 BS EN 593:1998. Industrial valves. Metallic butterfly valves
BS EN 197-2:2000 BS EN 197-2:2000. Cement. Conformity evaluation
BS EN 12050-2:2001 BS EN 12050-2:2001. Wastewater lifting plants for buildings and sites. Principles of construction and testing. Lifting plants for faecal-free wastewater
BS EN 1450:1997, BS 2782-12:Method 1224F:1997 BS EN 1450:1997, BS 2782-12:Method 1224F:1997. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove th
ISO6296 : 2000 EDTN 1 ISO6296 : 2000 EDTN 1. ISO 6296:2000 Petroleum products - Determination of water - Potentiometric Karl Fischer titration method
BS EN ISO 9974-1:2000 BS EN ISO 9974-1:2000. Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing. Threaded ports
BS EN 50174-1:2001 BS EN 50174-1:2001. Information technology. Cabling installation. Specification and quality assurance
BS EN 50174-2:2001 BS EN 50174-2:2001. Information technology. Cabling installation. Installation planning and practices inside buildings
BS EN 50310:2000 BS EN 50310:2000. Application of equipotential bonding and earthing in buildings with information technology equipment
BS EN 1313-1:1997 BS EN 1313-1:1997. Round and sawn timber. Permitted deviations and preferred sizes. Softwood sawn timber
BS EN 61909:2000, IEC 61909:2000 BS EN 61909:2000, IEC 61909:2000. Audio recording. Minidisc system
BS ISO 14558:2000 BS ISO 14558:2000. Rubber. Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy
BS EN 12445:2001 BS EN 12445:2001. Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Test methods
BS EN 12453:2001 BS EN 12453:2001. Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Requirements
BS EN ISO 11608-1:2001 BS EN ISO 11608-1:2001. Pen-injectors for medical use. Pen-injectors. Requirements and test methods
BS EN ISO 11608-2:2001 BS EN ISO 11608-2:2001. Pen-injectors for medical use. Needles. Requirements and test methods
BS EN ISO 11608-3:2001 BS EN ISO 11608-3:2001. Pen-injectors for medical use. Finished cartridges. Requirements and test methods
BS ISO 8379:1998 BS ISO 8379:1998. Industrial trucks. Rough terrain trucks. Stability tests
BS ISO 18906:2000 BS ISO 18906:2000. Imaging materials. Photographic films. Specifications for safety film
BS ISO 18915:2000 BS ISO 18915:2000. Imaging materials. Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation
KIT 28 KIT 28. Drainage systems set
BS ISO 14707:2000 BS ISO 14707:2000. Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use
BS EN 10279:2000 BS EN 10279:2000. Hot rolled steel channels. Tolerances on shape, dimension and mass
BS EN ISO 11403-1:2000 BS EN ISO 11403-1:2000. Plastics. Acquisition and presentation of comparable multipoint data. Mechanical properties
BS EN 12862:2000 BS EN 12862:2000. Transportable gas cylinders. Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders
BS EN 50244:2000 BS EN 50244:2000. Electrical apparatus for the detection of combustible gases in domestic premises. Guide on the selection, installation, use and maintenance
BS EN 1069-2:2000 BS EN 1069-2:2000. Water slides over 2 m height. Instructions
BS EN 10273:2000 BS EN 10273:2000. Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
BS ISO 14897:2000 BS ISO 14897:2000. Plastics. Polyols for use in the production of polyurethane. Determination of water content
BS EN 461:1999 BS EN 461:1999. Specification for dedicated liquefied petroluem gas appliances. Flueless non-domestic space heaters not exceeding 10 kW
BS EN ISO 7885:2001 BS EN ISO 7885:2001. Sterile dental injection needles for single use
BS EN ISO 15528:2000 BS EN ISO 15528:2000. Paints, varnishes and raw materials for paints and varnishes. Sampling
BS 8203:2001 BS 8203:2001. Code of practice for installation of resilient floor coverings
BS EN 12775:2001 BS EN 12775:2001. Solid wood panels. Classification and terminology
DD ENV 12872:2000 DD ENV 12872:2000. Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs
BS EN ISO 11721-1:2001 BS EN ISO 11721-1:2001. Textiles. Determination of resistance of cellulose-containing textiles to micro-organisms. Soil burial test. Assessment of rot-retardant finishing
BS EN 1337-1:2000 BS EN 1337-1:2000. Structural bearings. General design rules
BS ISO 13491-2:2000 BS ISO 13491-2:2000. Banking. Secure cryptographic devices (retail). Security compliance checklists for devices used in magnetic stripe cards systems
BS EN 12629-4:2001 BS EN 12629-4:2001. Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Concrete and tile making machines
BS ISO 5796:2000 BS ISO 5796:2000. Rubber compounding ingredients. Natural calcium carbonate. Test methods
DD ENV 1997-3:2000 DD ENV 1997-3:2000. Eurocode 7. Geotechnical design. Design assisted by fieldtesting
BS 3734-1:1997, ISO 3302-1:1996 BS 3734-1:1997, ISO 3302-1:1996. Rubber. Tolerances for products. Dimensional tolerances
BS EN 12200-1:2000 BS EN 12200-1:2000. Plastics rainwater piping systems for above ground external use. Unplasticized poly (vinyl chloride) (PVC-U). Specifications for pipes, fittings and the system
CWA 13937-1:2000 CWA 13937-1:2000. J/extensions for financial service (J/XFS) for the Java platform. Base architecture. Programmer's reference
CWA 13937-2:2000 CWA 13937-2:2000. J/extensions for financial service (J/XFS) for the Java platform. Pin keypad device class interface. Programmer's reference
CWA 13937-3:2000 CWA 13937-3:2000. J/extensions for financial service (J/XFS) for the Java platform. Magnetic stripe & chip card device class interface. Programmer's reference
CWA 13937-4:2000 CWA 13937-4:2000. J/extensions for financial service (J/XFS) for the Java platform. Text input/output device interface. Programmer's reference
CWA 13937-5:2000 CWA 13937-5:2000. J/extensions for financial service (J/XFS) for the Java platform. Cash dispenser, recycler and ATM device class interface. Programmer's reference
CWA 13937-6:2000 CWA 13937-6:2000. J/extensions for financial service (J/XFS) for the Java platform. Printer device class interface. Programmer's reference
CWA 13937-7:2000 CWA 13937-7:2000. J/extensions for financial service (J/XFS) for the Java platform. Alarm device interface. Programmer's reference
CWA 13937-8:2000 CWA 13937-8:2000. J/extensions for financial service (J/XFS) for the Java platform. Sensors and indicators unit device class interface. Programmer's reference
CWA 13937-9:2000 CWA 13937-9:2000. J/extensions for financial service (J/XFS) for the Java platform. Depository device class interface. Programmer's reference
CWA 13937-10:2000 CWA 13937-10:2000. J/extensions for financial service (J/XFS) for the Java platform. Check reader/scanner device class interface. Programmer's reference
CWA 13994:2000 CWA 13994:2000. X.500 profile ADY12. DUA support of distributed operations
CWA 13995:2000 CWA 13995:2000. X.500 profile ADY12. DAS support of directory access protocol
CWA 13992:2000 CWA 13992:2000. Recommendations for standardization in the field of XML for electronic data interchange
CWA 13993:2000 CWA 13993:2000. Recommendations and guidance on the use of XML for electronic data interchange
BS EN ISO 3740:2001 BS EN ISO 3740:2001. Acoustics. Determination of sound power levels of noise sources. Guidelines for the use of basic standards
PD IEC 61955:2000, IEC 61955:1998 PD IEC 61955:2000, IEC 61955:1998. Primary batteries. Summary of research and actions limiting risks to reversed installation of primary batteries
BS ISO 15870:2000 BS ISO 15870:2000. Powered industrial trucks. Safety signs and hazard pictorials. General principles
BS ISO 11520-2:2001 BS ISO 11520-2:2001. Agricultural grain driers. Determination of drying performance. Additional procedures and crop-specific requirements
BS EN 1547:2001 BS EN 1547:2001. Industrial thermoprocessing equipment. Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
BS EN 1503-1:2000 BS EN 1503-1:2000. Valves. Materials for bodies, bonnets and covers. Steels specified in European Standards
BS EN 1503-2:2000 BS EN 1503-2:2000. Valves. Materials for bodies, bonnets and covers. Steels other than those specified in European Standards
BS EN 583-2:2001 BS EN 583-2:2001. Non-destructive testing. Ultrasonic examination. Sensitivity and range setting
BS EN 13477-1:2001 BS EN 13477-1:2001. Non-destructive testing. Acoustic emission. Equipment characterization. Equipment description
BS EN 13477-2:2001 BS EN 13477-2:2001. Non-destructive testing. Acoustic emission. Equipment characterization. Verification of operating characteristic
BS EN ISO 13297:2001 BS EN ISO 13297:2001. Small craft. Electrical systems. Alternating current installations
BS ISO 13583-1:2000 BS ISO 13583-1:2000. Centrifugally cast steel and alloy products. General testing and tolerances
BS AU 50-1.1.2:2001, ISO 17269:2000 BS AU 50-1.1.2:2001, ISO 17269:2000. Tyres and wheels. Tyres. Car tyres. Methods for measuring rolling circumference. Loaded new tyres
BS EN ISO 8099:2001 BS EN ISO 8099:2001. Small craft. Toilet waste retention systems
BS EN ISO 13929:2001 BS EN ISO 13929:2001. Small craft. Steering gear. Geared link systems
BS EN 55011:1998 BS EN 55011:1998. Limits and methods of measurement of radio disturbance characteristics of industrial, scientific and medical (ISM) radio-frequency equipment
BS ISO 6025:2000 BS ISO 6025:2000. Cinematography. Analogue photographic sound test films, 35 mm and 16mm. Specifications
BS ISO 12307-2:2000 BS ISO 12307-2:2000. Plain bearings. Checking of wrapped bushes. Checking the inside diameter
BS ISO 12965:2000 BS ISO 12965:2000. Butadiene rubber. Determination of microstructure by infra-red spectrometry
BS 5766-21:2001, BS ISO 7485:2000 BS 5766-21:2001, BS ISO 7485:2000. Methods for analysis of animal feeding stuffs. Determination of potassium and sodium contents. Methods using flame-emission spectro
BS EN 1423:1998 BS EN 1423:1998. Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two
KIT 46 KIT 46. Quality management systems (BS EN ISO 9000:2000 Series)
KIT 47 KIT 47. BSI Electronic Book. Quality Management 2000 Version 1 (BS EN ISO 9000:2000 Series CD-ROM Kit)
KIT 48 KIT 48. BSI Electronic Book. Quality Management 2000 Version 2 (BS EN ISO 9000:2000 Series CD-ROM Toolkit)
KIT 30 KIT 30. Testing fresh concrete set
KIT 29 KIT 29. Fire safety engineering set
DD ISO/TS 16668:2000 DD ISO/TS 16668:2000. Basic semantics register (BSR)
BS EN ISO 10545-16:2000 BS EN ISO 10545-16:2000. Ceramic tiles. Determination of small colour differences
ISO 9001:2000 Insight Guidance CD ISO 9001:2000 Insight Guidance CD. ISO 9001:2000 Insight Guidance CD
HB 10179:2000 HB 10179:2000. Mitchell's Structure & Fabric - Part 2
BS ISO 5781:2000 BS ISO 5781:2000. Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces
HB 10177:2000 HB 10177:2000. Mitchell's Structure & Fabric - Part 1
BS EN 13016-1:2000, BS 2000-394:2001 BS EN 13016-1:2000, BS 2000-394:2001. Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP)
BS EN 12975-1:2000 BS EN 12975-1:2000. Thermal solar systems and components. Solar collectors. General requirements
BS EN 13016-2:2000, BS 2000-409:2001 BS EN 13016-2:2000, BS 2000-409:2001. Liquid petroleum products. Vapour pressure. Determination of absolute vapour pressure (AVP) between 40 °C and 100 °C
BS EN ISO 105-Z06:2000 BS EN ISO 105-Z06:2000. Textiles. Tests for colour fastness. Evaluation of dye and pigment migration
BS ISO/IEC 14478-2:1998 Version 2 BS ISO/IEC 14478-2:1998 Version 2. Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO). Foundation
BS EN 12467:2000 BS EN 12467:2000. Fibre-cement flat sheets. Product specifications and test methods
BS EN 13429:2000 BS EN 13429:2000. Packaging. Reuse
WD/BS1113 : 1999 WD/BS1113 : 1999. Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers)
wd/BS8800 HEALTH SAFETY ELECTRONIC BOOK wd/BS8800 HEALTH SAFETY ELECTRONIC BOOK.
BS ISO 4268:2000, ISO 4268:2000 BS ISO 4268:2000, ISO 4268:2000. Petroleum and liquid petroleum products. Temperature measurements. Manual methods
BS EN ISO 3098-6:2000 BS EN ISO 3098-6:2000. Technical product documentation. Lettering. Cyrillic alphabet
BS EN 1089-3:1997 BS EN 1089-3:1997. Transportable gas cylinders. Gas cylinder identification (excluding LPG). Colour coding
BS EN 10245-3:2001 BS EN 10245-3:2001. Steel wire and wire products. Organic coatings on steel wire. PE coated wire
BS EN 60601-2-34:2001, IEC 60601-2-34:2000 BS EN 60601-2-34:2001, IEC 60601-2-34:2000. Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety, includi
BS EN 13199-2:2000 BS EN 13199-2:2000. Packaging. Small load carrier systems. Column Stackable System (CSS)
BS EN ISO 3098-2:2000 BS EN ISO 3098-2:2000. Technical product documentation. Lettering. Latin alphabet, numerals and marks
BS EN ISO 3098-3:2000 BS EN ISO 3098-3:2000. Technical product documentation. Lettering. Greek alphabet
BS EN ISO 2898-1:2000 BS EN ISO 2898-1:2000. Plastics. Plasticized poly (vinyl chloride) (PVC-P) moulding and extrusion materials. Designation system and basis for specifications
BS EN 920:2001 BS EN 920:2001. Paper and board intended to come into contact with foodstuffs. Determination of dry matter content in an aqueous extract
BS EN 646:2001 BS EN 646:2001. Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board
BS EN ISO 8502-9:2001, BS 7079-B9:1998 BS EN ISO 8502-9:2001, BS 7079-B9:1998. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cl
BS EN ISO 10720:2007 BS EN ISO 10720:2007. Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas
BS EN 12763:2000 BS EN 12763:2000. Fibre-cement pipes and fittings for discharge systems for buildings. Dimensions and technical terms of delivery
BS ISO 9924-2:2000 BS ISO 9924-2:2000. Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Acrylonitrile-butadiene and halobutyl rub
BS EN ISO 11064-3:2000 BS EN ISO 11064-3:2000. Ergonomic design of control centres. Control room layout
BS 6004:2000 BS 6004:2000.
ISO/IEC17309 : 2000 EDTN 1 ISO/IEC17309 : 2000 EDTN 1. ISO/IEC 17309: Information technology -- Telecommunications and information exchange between systems -- Private Intergrated Services Networks --
ISO/IEC17310 : 2000 EDTN 1 ISO/IEC17310 : 2000 EDTN 1. ISO/IEC 17310: Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Ma
ISO/IEC17311 : 2000 EDTN 1 ISO/IEC17311 : 2000 EDTN 1. ISO/IEC 17311: Information technology -- Telecommunication and information exchange between systems -- Private Integrated Services Network -- Map
CWA 13987-1:2000 CWA 13987-1:2000. Smart card systems. Interoperable citizen services. User related information (based on DISTINCT). Definition of user related information
CWA 13987-2:2000 CWA 13987-2:2000. Smart card systems. Interoperable citizen services. User related information (based on DISTINCT). Implementation guidelines
CWA 13987-3:2000 CWA 13987-3:2000. Smart card systems. Interoperable citizen services. User related information (based on DISTINCT). Guidelines for creating, operating and maintaining an interoperable
BS EN 12625-7:2000 BS EN 12625-7:2000. Tissue paper and tissue products. Determination of optical properties
PD 6660:2000 PD 6660:2000. PNO-ISC information document number 008. Management of partial calling line identity
BS EN 12781:2001 BS EN 12781:2001. Wallcoverings. Specification for cork panels
CWA 14040:2000 CWA 14040:2000. A standardization work programme for learning and training technologies & educational multimedia software
BS EN 1122:2001 BS EN 1122:2001. Plastics. Determination of cadmium. Wet decomposition method
BS EN 60130-9:2001, IEC 60130-9:2000 BS EN 60130-9:2001, IEC 60130-9:2000. Connectors for frequencies below 3 MHz. Circular connectors for radio and associated sound equipment
BS 8204-1:1999 BS 8204-1:1999. Screeds, bases and in-situ floorings. Concrete bases and cement sand levelling screeds to receive floorings. Code of practice
BS 8204-2:1999 BS 8204-2:1999. Screeds, bases and in-situ floorings. Concrete wearing surfaces. Code of practice
BS EN 3920:2001 BS EN 3920:2001. Aerospace series. Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3). Filler metal for brazing. Powder or paste
BS EN ISO 14644-2:2000 BS EN ISO 14644-2:2000. Cleanrooms and associated controlled environments. Specifications for testing and monitoring to prove continued compliance with ISO 14644-1
BS EN ISO 7823-1:2000 BS EN ISO 7823-1:2000. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics. Cast sheets
BS EN 795:1997 BS EN 795:1997. Protection against falls from a height. Anchor devices. Requirements and testing
BS EN 60335-2-62:1997 BS EN 60335-2-62:1997. Specification for safety of household and similar electrical appliances. Particular requirements for commercial electric rinsing sinks
WD/ITSMF - BS15000 : 2000 WD/ITSMF - BS15000 : 2000.
ISO/IEC10021-8 : 1999 (EDTN 2) ISO/IEC10021-8 : 1999 (EDTN 2). ISO/IEC 10021-8:1999 (2nd Edition) Informatioon technology -- Message handling Systems (MHS) --. Part 8: Electronic Data Interchange Mess
BS EN 62027:2001 BS EN 62027:2001. Preparation of parts lists
BS EN 12373-11:2001 BS EN 12373-11:2001. Aluminium and aluminium alloys. Anodizing. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60°, and
BS EN 12373-12:2001 BS EN 12373-12:2001. Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
BS EN 12373-13:2001 BS EN 12373-13:2001. Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotome
BS EN 12373-14:2001 BS EN 12373-14:2001. Aluminium and aluminium alloys. Anodizing. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
BS EN 12373-15:2001 BS EN 12373-15:2001. Aluminium and aluminium alloys. Anodizing. Assessment of resistance of anodic oxidation coatings to cracking by deformation
BS EN 867-4:2001 BS EN 867-4:2001. Non-biological systems for use in sterilizers. Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration
DD ENV 13154-1:2001 DD ENV 13154-1:2001. Data communication for HVAC application field net. Objects
BS ISO 11698-1:2000 BS ISO 11698-1:2000. Micrographics. Methods of measuring image quality produced by aperture card scanners. Characteristics of the test images
BS ISO 11698-2:2000 BS ISO 11698-2:2000. Micrographics. Methods of measuring image quality produced by aperture card scanners. Quality criteria and control
BS EN 61346-2:2001, IEC 61346-2:2000 BS EN 61346-2:2001, IEC 61346-2:2000. Industrial systems, installations and equipment and industrial products. Structuring principles and reference designations. C
BS 6043-2-18:2001, ISO 5931:2000 BS 6043-2-18:2001, ISO 5931:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of total sulfur
WD/ISO/IEC19460 : 2001 EDTN 1 WD/ISO/IEC19460 : 2001 EDTN 1. ISO/IEC19460 : 2001 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Ne
ISO/IEC19459 : 2001 EDTN 1 ISO/IEC19459 : 2001 EDTN 1. ISO/IEC19459 : 2001 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
BS IEC 62118:2000 BS IEC 62118:2000. Nuclear reactor instrumentation. Pressurized water reactor (PWR) of VVER design. Monitoring adequate cooling within the core during cold shutdown
BS ISO 15100:2000 BS ISO 15100:2000. Plastics. Reinforcement fibres. Chopped strands. Determination of bulk density
BS ISO 2559:2000 BS ISO 2559:2000. Textile glass. Mats (made from chopped or continuous strands). Designation and basis for specifications
PD 6645:2000 PD 6645:2000. PNO-ISC specification number 006. Interconnect user part (IUP)
BS EN 12629-1:2001 BS EN 12629-1:2001. Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Common requirements
BS EN 12601:2001 BS EN 12601:2001. Reciprocating internal combustion engine driven generating sets. Safety
BS ISO/TR 19121:2000 BS ISO/TR 19121:2000. Geographic information. Imagery and gridded data
BS EN ISO 7899-1:1999, BS 6068-4.3:1999 BS EN ISO 7899-1:1999, BS 6068-4.3:1999. Water quality. Detection and enumeration of intestinal enterococci in surface and waste water. Miniaturized method (Mos
BS EN ISO 9308-3:1999, BS 6068-4.10:1999 BS EN ISO 9308-3:1999, BS 6068-4.10:1999. Water quality. Detection and enumeration of Escherichia Coli and coliform bacteria in surface and waste water. Miniat
BS EN 12976-1:2001 BS EN 12976-1:2001. Thermal solar systems and components. Factory made systems. General requirements
BS EN 12976-2:2001 BS EN 12976-2:2001. Thermal solar systems and components. Factory made systems. Test methods
BS EN 1337-7:2001 BS EN 1337-7:2001. Structural bearings. Spherical and cylindrical PTFE bearings
BS EN 60601-2-38:1997, BS 5724-2.38:1997,IEC 60601-2-38:1996 BS EN 60601-2-38:1997, BS 5724-2.38:1997,IEC 60601-2-38:1996. Medical electrical equipment. Particular requirements for safety. Particular
BS EN 1337-2:2001 BS EN 1337-2:2001. Structural bearings. Sliding elements
RA Software Tool RA Software Tool. RA Software Tool
KIT 61 KIT 61. Information security management (RA software) condensed Toolkit
KIT 51 KIT 51. Information security management (RA software tool and DISC PD 3000 set)
BS EN 12835:2001 BS EN 12835:2001. Airtight shutters. Air permeability test
BS EN 1596:1998 BS EN 1596:1998. Specification for dedicated liquefied petroleum gas appliances. Mobile and portable non-domestic forced convection direct fired air heaters
BS ISO 13562-1:2000 BS ISO 13562-1:2000. Industrial variable-reach trucks. Stability tests
BS ISO 13562-2:2001 BS ISO 13562-2:2001. Industrial variable-reach trucks. Additional stability tests for trucks handling freight containers of length 6m and above
BS ISO 15794:2001 BS ISO 15794:2001. Bi-directional and multi-directional fork-lift trucks. Stability tests
BS 7870-1:1996 BS 7870-1:1996. LV and MV polymeric insulated cables for use by distribution and generation utilities. General
BS EN 60335-2-59:1998, IEC 60335-2-59:1997 BS EN 60335-2-59:1998, IEC 60335-2-59:1997. Specification for safety of household and similar electrical appliances. Particular requirements. Insect killers
BS EN ISO 10249:2000 BS EN ISO 10249:2000. Fluid fertilizers. Preliminary visual examination and preparation of samples for physical testing
BS EN 62020:1999, IEC 62020:1998 BS EN 62020:1999, IEC 62020:1998. Electrical accessories. Residual current monitors for household and similar uses (RCMs)
BS EN ISO 10248:2000 BS EN ISO 10248:2000. Fluid fertilizers. De-aeration of suspension samples by film disentrainment
KIT 31 KIT 31. Office furniture seating pack
PD 6639:2001 PD 6639:2001. PNO-ISC specification number 005 C7. Interconnect message transfer part (MTP)
PD 6627:2001 PD 6627:2001. PNO-ISC Information document number 007. UK Interconnect user of SCCP and MTP
BS ISO 14606:2000 BS ISO 14606:2000. Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
BS EN 12440:2001 BS EN 12440:2001. Natural stone. Denomination criteria
BS EN ISO 12569:2001 BS EN ISO 12569:2001. Thermal insulation in buildings. Determination of air change in buildings. Tracer gas dilution method
BS EN ISO 14161:2001 BS EN ISO 14161:2001. Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results
BS EN 61747-3:2000, IEC 61747-3:1998 BS EN 61747-3:2000, IEC 61747-3:1998. Liquid crystal and solid-state display devices. Sectional specification for liquid crystal display (LCD) cells
BS EN ISO 8434-4:2000 BS EN ISO 8434-4:2000. Metallic tube connections for fluid power and general use. 24° cone connectors with O-ring weld-on nipples
BS EN ISO 182-4:2001 BS EN ISO 182-4:2001. Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any oth
BS EN ISO 182-3:2001 BS EN ISO 182-3:2001. Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any oth
BS EN 13318:2000 BS EN 13318:2000. Screed material and floor screeds. Definitions
BS EN 60942:1998, IEC 60942:1997 BS EN 60942:1998, IEC 60942:1997. Electroacoustics. Sound calibrators
BS EN 1444:2001 BS EN 1444:2001. Fibre-cement pipelines. Guide for laying and on-site work practices
KIT 40 KIT 40. Complete service life planning pack
CWA 13988:2000 CWA 13988:2000. Guidance information for the use of Dublin Core in Europe
CWA 13989:2000 CWA 13989:2000. Description of structure and maintenance of the web based observatory of European work on metadata
CWA 14050-1:2000 CWA 14050-1:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Application programming interface (API). Service provider interface (SPI). Programmer's
CWA 14050-2:2000 CWA 14050-2:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Service classes definition
CWA 14050-3:2000 CWA 14050-3:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Printer device class interface
CWA 14050-4:2000 CWA 14050-4:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Identification card unit device class interface
CWA 14050-5:2000 CWA 14050-5:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Cash dispenser device class interface
CWA 14050-6:2000 CWA 14050-6:2000. Extensions for financial services (XFS) interface specification. Release 3.0. PIN keypad device class interface
CWA 14050-7:2000 CWA 14050-7:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Check reader/scanner device
CWA 14050-8:2000 CWA 14050-8:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Depository device class interface
CWA 14050-9:2000 CWA 14050-9:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Text terminal unit device class interface
CWA 14050-10:2000 CWA 14050-10:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Sensors and indicators unit device class interface
CWA 14050-11:2000 CWA 14050-11:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Vendor dependent mode class interface
CWA 14050-12:2000 CWA 14050-12:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Camera device class interface
CWA 14050-13:2000 CWA 14050-13:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Alarm device class interface
CWA 14050-14:2000 CWA 14050-14:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Card embossing unit class interface
CWA 14050-15:2000 CWA 14050-15:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Cash in module device class interface
CWA 14050-16:2000 CWA 14050-16:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Application programming interface (API). Service provider interface (SPI). Migration
CWA 14050-17:2000 CWA 14050-17:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Printer device class interface. Migration from version 2.0 (see CWA 13449) to version
CWA 14050-18:2000 CWA 14050-18:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Identification card device class interface. Migration from version 2.0 (see CWA 13449
CWA 14050-19:2000 CWA 14050-19:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Cash dispenser device class interface. Migration from version 2.0 (see CWA 13449) to
CWA 14050-20:2000 CWA 14050-20:2000. Extensions for financial services (XFS) interface specification. Release 3.0. PIN keypad device class interface. Migration from version 2.0 (see CWA 13449) to vers
CWA 14050-21:2000 CWA 14050-21:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Depository device class interface. Migration from version 2.0 (see CWA 13449) to vers
CWA 14050-22:2000 CWA 14050-22:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Text terminal unit device class interface. Migration from version 2.0 (see CWA 13449)
CWA 14050-23:2000 CWA 14050-23:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Sensors and indicators unit device class interface. Migration from version 2.0 (see C
CWA 14050-24:2000 CWA 14050-24:2000. Extensions for financial services (XFS) interface specification. Release3.0. Camera device class interface. Migration from version 2.0 (see CWA 13449) to version 3
CWA 14050-25:2000 CWA 14050-25:2000. Extensions for financial services (XFS) interface specification. Release 3.0. Identification card device class interface. PC/SC integration guidelines
BS IEC 61892-5:2000 BS IEC 61892-5:2000. Mobile and fixed offshore units. Electrical installations. Mobile units
PD 6654:2001 PD 6654:2001. PNO-ISC/SER/004 Call forwarding on subscriber not reachable. Supplementary service
BS ISO/IEC 9075-10:2000 BS ISO/IEC 9075-10:2000. Information technology. Database languages. SQL. Object Language Bindings (SQL/OLB)
BS EN ISO 105-B02:1999 BS EN ISO 105-B02:1999. Textiles. Tests for colour fastness. Colour fastness to artificial light: Xenon arc fading lamp test
BS EN ISO 14565:2001, BS 5766-26:2001 BS EN ISO 14565:2001, BS 5766-26:2001. Animal feeding stuffs. Determination of vitamin A content. Method using high-performance liquid chromatography
BS EN ISO 6869:2001, BS 5766-25:2001 BS EN ISO 6869:2001, BS 5766-25:2001. Animal feeding stuffs. Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zi
BS 8297:2000 BS 8297:2000. Code of practice for Design and installation of non-loadbearing precast concrete cladding
BS EN ISO 2411:2000 BS EN ISO 2411:2000. Rubber or plastics-coated fabrics. Determination of coating adhesion
BS EN ISO 13534:2001 BS EN ISO 13534:2001. Petroleum and natural gas industries. Drilling and production equipment. Inspection, maintenance, repair and re-manufacture of hoisting equipment
BS ISO 15544:2000 BS ISO 15544:2000. Petroleum and natural gas industries. Offshore production installations. Requirements and guidelines for emergency response. Requirements and guidelines for emerge
BS EN ISO 9241-14:2000 BS EN ISO 9241-14:2000. Ergonomic requirements for office work with visual display terminals (VDTs). Menu dialogues
BS EN 12286:1999 BS EN 12286:1999. In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Presentation of reference measurement procedures
BS 4475:2000 BS 4475:2000. Specification for straight mineral lubricating oils
BS EN 60065:1998, BS 415:1998 BS EN 60065:1998, BS 415:1998. Audio, video and similar electronic apparatus. Safety requirements
BS ISO 15730:2000 BS ISO 15730:2000. Metallic and other inorganic coatings. Electropolishing as a means of smoothing and passivating stainless steel
PD ISO/TR 20461:2001 PD ISO/TR 20461:2001. Determination of uncertainty for volume measurements made using the gravimetric method
BS EN ISO 3961:2000 BS EN ISO 3961:2000. Animal and vegetable fats and oils. Determination of iodine value
BS EN ISO 11468:2000 BS EN ISO 11468:2000. Plastics. Preparation of PVC pastes for test purposes. Dissolver method
BS EN 12816:2001 BS EN 12816:2001. Transportable refillable steel and aluminium LPG cylinders. Disposal
BS ISO/IEC 17799:2000, BS 7799-1:2000 BS ISO/IEC 17799:2000, BS 7799-1:2000. Information technology. Code of practice for information security management
BS EN 61232:1997 BS EN 61232:1997. Aluminium-clad steel wires for electrical purposes
BS ISO 15911:2000, BS 2000-355:2001 BS ISO 15911:2000, BS 2000-355:2001. Methods of test for petroleum and its products. Estimation of net specific energy of aviation turbine fuels using hydrogen cont
BS EN 1074-5:2001 BS EN 1074-5:2001. Valves for water supply. Fitness for purpose requirements and appropriate verification tests. Control valves
BS EN 12560-1:2001 BS EN 12560-1:2001. Flanges and their joints. Gaskets for Class-designated flanges. Non-metallic flat gaskets with or without inserts
BS EN 12560-2:2001 BS EN 12560-2:2001. Flanges and their joints. Gaskets for Class-designated flanges. Spiral wound gaskets for use with steel flanges
BS EN 12560-3:2001 BS EN 12560-3:2001. Flanges and their joints. Gaskets for Class-designated flanges. Non-metallic PTFE envelope gaskets
BS EN 12560-4:2001 BS EN 12560-4:2001. Flanges and their joints. Gaskets for Class-designated flanges. Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
BS EN 12560-5:2001 BS EN 12560-5:2001. Flanges and their joints. Gaskets for Class-designated flanges. Metallic ring joint gaskets for use with steel flanges
NC/BSENISO12937/IP : 2001 NC/BSENISO12937/IP : 2001. BS EN ISO 12937 BS 2000-438 Petroleum products - Determination of water Coulometric Karl Fischer titration method
BS 7800:2000 BS 7800:2000. Automotive fuel. High octane (super) unleaded petrol. Specification
ISO/IEC10165-9 : 2000 EDTN 1 ISO/IEC10165-9 : 2000 EDTN 1. ISO/IEC 10165-9 Information technology -- Open Systems Interconnection -- Structure of Management Information. Part :9 System management appl
BS EN 55015:1996, CISPR 15:1996 BS EN 55015:1996, CISPR 15:1996. Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
HB 10181:2001 HB 10181:2001. Transition to ISO 9001:2000
WD/HB10164 : 1999 (revised text 12/00) WD/HB10164 : 1999 (revised text 12/00).
BS 6043-3.8.1:2001, ISO 12988-1:2000 BS 6043-3.8.1:2001, ISO 12988-1:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Carboxy reactivity of preb
BS ISO 13746:2000 BS ISO 13746:2000. Textile floor coverings. Guidelines for installation and use on stairs
BS EN ISO 7094:2000 BS EN ISO 7094:2000. Plain washers. Extra large series. Product grade C
BS EN 12164:1998 BS EN 12164:1998. Copper and copper alloys. Rod for free machining purposes
BS 6043-2.20.1:2001, ISO 12981-1:2000 BS 6043-2.20.1:2001, ISO 12981-1:2000. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Carboxy reactivity o
BS EN 60601-2-18:1997, BS 5724-2.18:1997,IEC 60601-2-18:1996 BS EN 60601-2-18:1997, BS 5724-2.18:1997,IEC 60601-2-18:1996. Medical electrical equipment. Particular requirements for safety. Specificati
BS EN ISO 7490:2001 BS EN ISO 7490:2001. Dental gypsum-bonded casting investments
BS EN 60335-2-73:1997 BS EN 60335-2-73:1997. Specification for safety of household and similar electrical appliances. Particular requirements. Fixed immersion heaters
BS ISO 9924-1:2000 BS ISO 9924-1:2000. Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Butadiene, ethylene-propylene copolymer a
BS ISO 98:2001 BS ISO 98:2001. Textile machinery and accessories. Spinning preparatory and spinning machinery. Main dimensions of coverings for top rollers
TS 1:2000 TS 1:2000. Issue 5.0 of the TickIT Guide
BS 7799-2:1999 BS 7799-2:1999. Information security management. Specification for information security management systems
BS ISO 15490:2000 BS ISO 15490:2000. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for tensile strength of monolithic ceramics at room temperature
BS EN 60383-1:1998 BS EN 60383-1:1998. Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic or glass insulator units for a.c. systems. Definitions, test methods and acceptance cr
BS EN 1107-2:2001 BS EN 1107-2:2001. Flexible sheets for waterproofing. Determination of dimensional stability. Plastic and rubber sheets for roof waterproofing
CWA 14087:2000 CWA 14087:2000. European call centre standards for training and qualification. Customer contact representatives
BS EN 13073:2001 BS EN 13073:2001. Footwear. Test methods for whole shoe. Water resistance
WD/ISO/IEC14496-3 : 1999 WD/ISO/IEC14496-3 : 1999 . ISO/IEC 14496-3 Information technology - Coding of audio-visual objects. Audio
BS EN 12699:2001 BS EN 12699:2001. Execution of special geotechnical work. Displacement piles
BS EN ISO 3497:2001 BS EN ISO 3497:2001. Metallic coatings. Measurement of coating thickness. X-ray spectrometric methods
BS EN 13366:2001 BS EN 13366:2001. Fertilizers. Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients
BS EN 13368-1:2001 BS EN 13368-1:2001. Fertilizers. Determination of chelating agents in fertilizers by ion chromatography. EDTA, HEDTA and DTPA
BS ISO 704:2000 BS ISO 704:2000. Terminology work. Principles and methods
BS EN 912:2000 BS EN 912:2000. Timber fasteners. Specifications for connections for timber
BS EN 1096-3:2001 BS EN 1096-3:2001. Glass in building. Coated glass. Requirements and test methods for class C and D coatings
BS EN 1096-2:2001 BS EN 1096-2:2001. Glass in building. Coated glass. Requirements and test methods for class A, B and S coatings
BS EN 13011:2001 BS EN 13011:2001. Transport services. Goods transport chains. System for declaration of performance conditions
BS EN 12444:2001 BS EN 12444:2001. Industrial, commercial and garage doors and gates. Resistance to wind load. Testing and calculation
BS ISO 1998-5:1998 BS ISO 1998-5:1998. Petroleum industry. Terminology. Transport, storage, distribution
BS EN 752-3:1997 BS EN 752-3:1997. Drain and sewer systems outside buildings. Planning
BS EN ISO 10683:2000 BS EN ISO 10683:2000. Fasteners. Non-electrolytically applied zinc flake coatings
BS EN 13274-1:2001 BS EN 13274-1:2001. Respiratory protective devices. Methods of test. Determination of inward leakage and total inward leakage
BS EN 13274-2:2001 BS EN 13274-2:2001. Respiratory protective devices. Methods of test. Practical performance tests
BS ISO 13296:1997 BS ISO 13296:1997. Diesel engines. High pressure fuel injection pipe assemblies. General requirements and dimensions
BS EN ISO 12215-1:2000 BS EN ISO 12215-1:2000. Small craft. Hull construction and scantlings. Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate
BS EN ISO 2580-1:2001 BS EN ISO 2580-1:2001. Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials. Designation system and basis for specifications
ISO/IEC2593 : 2000 EDTN 4 ISO/IEC2593 : 2000 EDTN 4. ISO/IEC2593 ISO/IEC 2593 Fourth Edition Information technology -- Telecommunications and information exchange between systems -- 34-pole DTC/DCE in
BS EN 13214:2001 BS EN 13214:2001. Thermal spraying. Thermal spray coordination. Tasks and responsibilities
DD ENV 1453-2:2001 DD ENV 1453-2:2001. Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (
BS EN 60870-5-101:1996, IEC 60870-5-101:1995 BS EN 60870-5-101:1996, IEC 60870-5-101:1995. Telecontrol equipment and systems. Transmission protocols. Companion standard for basic telecontrol tasks
BS EN ISO 10441:1999 BS EN ISO 10441:1999. Petroleum and natural gas industries. Flexible couplings for mechanical power transmission. Special purpose applications
BS EN 375:2001 BS EN 375:2001. Information supplied by the manufacturer with in vitro diagnostic reagents for professional use
BS EN 771-6:2001 BS EN 771-6:2001. Specification for masonry units. Natural stone masonry units
BS 2000-323:2000 BS 2000-323:2000. Methods of test for petroleum and its products. Determination of thermal oxidation stability of gas turbine fuels. JFTOT method
BS 2000-61:1999 BS 2000-61:1999. Methods of test for petroleum and its products. Determination of sulfur. High pressure combustion method
BS EN ISO 389-5:2001 BS EN ISO 389-5:2001. Acoustics. Reference zero for the calibration of audiometric equipment. Reference equivalent threshold sound pressure levels for pure tones in the frequency
BS 2000-455:2001 BS 2000-455:2001. Methods of test for petroleum and its products. Determination of manganese in gasoline. Atomic absorption spectrometry (AAS) method
CWA 13943:2000 CWA 13943:2000. Lightweight directory access protocol (LDAP) V3: Level of support of LDAP server
CWA 13944:2000 CWA 13944:2000. X.500 profile ADY42. Directory system access (DAS) authentication as directory access protocol (DAP) responder
BS EN ISO 11126-7:2001 BS EN ISO 11126-7:2001. Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Specificatio
BS 2000-456:2000 BS 2000-456:2000. Methods of test for petroleum and its products. Determination of potassium in gasoline. Atomic absorption spectrometry (AAS) method
BS EN 13523-1:2001 BS EN 13523-1:2001. Coil coated metals. Test methods. Coating thickness
ISO15500-3 : 2001 EDTN.1 ISO15500-3 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 3: Check valve
ISO15500-4 : 2001 EDTN.1 ISO15500-4 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 4: Manual valve
ISO15500-5 : 2001 EDTN.1 ISO15500-5 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 5: Manual cylinder valve
ISO15500-6 : 2001 EDTN.1 ISO15500-6 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 6: Automatic valve
ISO15500-8 : 2001 EDTN.1 ISO15500-8 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 8: Pressure indicator
ISO15500-9 : 2001 EDTN.1 ISO15500-9 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 9: Pressure regulator
ISO15500-10 : 2001 EDTN.1 ISO15500-10 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 10: Gas-flow adjuster
ISO15500-15 : 2001 EDTN.1 ISO15500-15 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 15: Gas-tight housing and ventilation hose
ISO15500-17 : 2001 EDTN.1 ISO15500-17 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 17: Flexible fuel line
ISO15500-18 : 2001 EDTN.1 ISO15500-18 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 18: Filter
ISO15500-19 : 2001 EDTN.1 ISO15500-19 : 2001 EDTN.1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 19: Fittings
ISO15500-16 : 2001 EDTN 1 ISO15500-16 : 2001 EDTN 1. ISO15500-16 : 2001 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 16: NGV rigid fuel line
ISO15500-2 : 2001 EDTN 1 ISO15500-2 : 2001 EDTN 1. ISO 15500 Road vehicles - Compressed natural gas (CNG) fuel system components -. Part 2: Performance & Tests
BS EN 13523-4:2001 BS EN 13523-4:2001. Coil coated metals. Test methods. Pencil hardness
BS EN 13523-5:2001 BS EN 13523-5:2001. Coil coated metals. Test methods. Resistance to rapid deformation (impact test)
BS EN 13523-7:2001 BS EN 13523-7:2001. Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
BS EN 13523-10:2001 BS EN 13523-10:2001. Coil coated metals. Test methods. Resistance to fluorescent UV light and water condensation
KIT 63 KIT 63. Cleanrooms kit
KIT 62 KIT 62. Soil improvers methods kit
BS EN 1896:2001 BS EN 1896:2001. Adhesives for paper and board, packaging and disposable sanitary products. Determination of tensile strength and elongation
PD 6668:2000 PD 6668:2000. Managing risk for corporate governance
BS EN 50301:2001 BS EN 50301:2001. Methods of measurement for the power consumption of audio, video and related equipment
BS EN ISO 13402:2001, BS 7891:1997 BS EN ISO 13402:2001, BS 7891:1997. Surgical and dental hand instruments. Determination of resistance against autoclaving, corrosion and thermal exposure
KIT 64 KIT 64. Electric cables. Low voltage pack
KIT 65 KIT 65. Essential oils. Starter kit
KIT 66 KIT 66. Functional safety set (BS IEC 61508)
KIT 67 KIT 67. Acceptance sampling pack
KIT 68 KIT 68. TickIT guide (issue 5). Offer pack 1
BS EN ISO 12086-2:2001 BS EN ISO 12086-2:2001. Plastics. Fluoropolymer dispersions and moulding and extrusion materials. Preparation of test specimens and determination of properties
KIT 69 KIT 69. Packaging and the environment set
KIT 70 KIT 70. Accuracy and precision pack
KIT 71 KIT 71. TickIT guide (issue 5). Offer pack 2
BS EN 61000-3-11:2001, IEC 61000-3-11:2000 BS EN 61000-3-11:2001, IEC 61000-3-11:2000. Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in p
HB 10187:2001 HB 10187:2001. Reliability, Maintainability and Risk. 6th edition
BS EN 12050-4:2001 BS EN 12050-4:2001. Wastewater lifting plants for buildings and sites. Principles of construction and testing. Non-return valves for faecal-free wastewater and wastewater containing
CWA 14088-1:2001 CWA 14088-1:2001. European electronic commerce for hospital procurement (ECHOP). Common operations carried out by HPDs (hospital procurement departments) in Europe
CWA 14088-2:2001 CWA 14088-2:2001. European electronic commerce for hospital procurement (ECHOP). List of standardized functional and technical specifications V.0.1
BS EN 12898:2001 BS EN 12898:2001. Glass in building. Determination of the emissivity
CWA 14088-3:2001 CWA 14088-3:2001. European electronic commerce for hospital procurement (ECHOP). Protocols of security and the interoperable authentication at the level of the sector V.0.1
CWA 14088-4:2001 CWA 14088-4:2001. European electronic commerce for hospital procurement (ECHOP). Future operations that should need to be standardized (due to the appearance of a standardized denomin
CWA 14088-5:2001 CWA 14088-5:2001. European electronic commerce for hospital procurement (ECHOP). Technology that still needs to be standardized
CWA 14088-6:2001 CWA 14088-6:2001. European electronic commerce for hospital procurement (ECHOP). Legal issues to facilitate the standardization of electronic commerce
CWA 14094:2001 CWA 14094:2001. European culturally specific ICT requirements
CWA 14051-1:2001 CWA 14051-1:2001. Information technology. European generic locales. General specifications
CWA 14051-2:2001 CWA 14051-2:2001. Information technology. European generic locales. Narrative cultural specifications, POSIX locales, and repertoiremap
DC01/560320 DC01/560320. Draft British Standard BS ISO 14460:1999/DAM1 Protective clothing for automobile drivers - Protection against heat and flame - Performance requirements and test methods Amendm
BS ISO 3384:1999, BS 903-A42:1999 BS ISO 3384:1999, BS 903-A42:1999. Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression at ambient and at elevated temperatures
BS EN ISO 734-1:2001 BS EN ISO 734-1:2001. Oilseed residues. Determination of oil content. Extraction method with hexane (or light petroleum)
BS EN ISO 734-2:2001 BS EN ISO 734-2:2001. Oilseed residues. Determination of oil content. Rapid extraction method
BS EN ISO 12086-1:2001 BS EN ISO 12086-1:2001. Plastics. Fluoropolymer dispersions and moulding and extrusion materials. Designation system and basis for specifications
BS EN 1147:2001 BS EN 1147:2001. Portable ladders for fire service use
BS ISO 279:1998 BS ISO 279:1998. Essential oils. Determination of relative density at 20°C. Reference method
DD ISO 709:1980 DD ISO 709:1980. Essential oils. Determination of ester value
BS EN 50165:1997 BS EN 50165:1997. Electrical equipment of non-electric appliances for household and similar purposes. Safety requirements
BS ISO 8038-2:2001 BS ISO 8038-2:2001. Optics and optical instruments. Screw threads for microscope objectives and related nosepieces. Screw thread type M25 x 0,75 mm
BS EN ISO 10519:2001, BS 4289-10:1998 BS EN ISO 10519:2001, BS 4289-10:1998. Rapeseed. Determination of chlorophyll content. Spectrometric method
BS ISO 12653-1:2000 BS ISO 12653-1:2000. Electronic imaging. Test target for the black-and-white scanning of office documents. Characteristics
BS 5979:2000 BS 5979:2000. Code of practice for remote centres receiving signals from security systems
BS EN 13311-3:2001 BS EN 13311-3:2001. Biotechnology. Performance criteria for vessels. Glass pressure vessels
BS ISO 14900:2001 BS ISO 14900:2001. Plastics. Polyols for use in the production of polyurethane. Determination of hydroxyl number
BS EN 13311-6:2001 BS EN 13311-6:2001. Biotechnology. Performance criteria for vessels. Chromatography columns
CWA 14113-1:2001 CWA 14113-1:2001. Electronic commerce for the sanitaryware and heating systems industry. Product terminology and classification
CWA 14113-2:2001 CWA 14113-2:2001. Electronic commerce for the sanitaryware and heating systems industry. Digital formats
CWA 14113-3:2001 CWA 14113-3:2001. Electronic commerce for the sanitaryware and heating systems industry. Rights and rules
CWA 14113-4:2001 CWA 14113-4:2001. Electronic commerce for the sanitaryware and heating systems industry. Industry common data bank
HB 10183:2001 HB 10183:2001. Effective EMS Auditing
HB 10184:2001 HB 10184:2001. Climate Change. A manager's guide
HB 10186:2001 HB 10186:2001. Engaging Employees. Environmental training and internal communication
BS EN 836:1997 BS EN 836:1997. Garden equipment. Powered lawnmowers. Safety
BS EN 13085:2001 BS EN 13085:2001. Wallcoverings. Specification for cork rolls
BS EN ISO 3690:2001 BS EN ISO 3690:2001. Welding and allied processes. Determination of hydrogen content in ferritic steel arc weld metal
BS EN ISO 12945-1:2001 BS EN ISO 12945-1:2001. Textiles. Determination of fabric propensity to surface fuzzing and to pilling. Pilling box method
KIT 72 KIT 72. Welding (BS EN 1011 Parts 1 and 2)
KIT 73 KIT 73. Welding (BS EN 1011 Parts 1 and 3)
KIT 74 KIT 74. Welding (BS EN 1011 Parts 1 and 4)
KIT 75 KIT 75. Welding (BS EN 1011 Parts 1, 2, 3 and 4)
EP 800 EP 800. Envoy Web
BS EN ISO 2808:2001, BS 3900-C5:1997 BS EN ISO 2808:2001, BS 3900-C5:1997. Paints and varnishes. Determination of film thickness
BS ISO 13586:2000 BS ISO 13586:2000. Plastics. Determination of fracture toughness (Gic and Kic). Linear elastic fracture mechanics (LEFM) approach
BS EN ISO 3248:2001, BS 3900-G7:1998 BS EN ISO 3248:2001, BS 3900-G7:1998. Paints and varnishes. Determination of the effect of heat
BS EN ISO 1522:2001, BS 3900-E5:1998 BS EN ISO 1522:2001, BS 3900-E5:1998. Paints and varnishes. Pendulum damping test
ISO/IEC13818-2 : 2000 (CD-ROM) ISO/IEC13818-2 : 2000 (CD-ROM). ISO/IEC 13818-2: 2ND EDITION Information technology -- Generic coding of moving pictures and associated audio information: Video
BS EN 60601-2-16:1998, BS 5724-2.16:1998,IEC 60601-2-16:1998 BS EN 60601-2-16:1998, BS 5724-2.16:1998,IEC 60601-2-16:1998. Medical electrical equipment. Particular requirements for safety. Particular
BS EN 60335-2-14:1997 BS EN 60335-2-14:1997. Specification for safety of household and similar electrical appliances. Particular requirements for kitchen machines
BS EN 848-1:1999 BS EN 848-1:1999. Safety of woodworking machines. One side moulding machines with rotating tool. Single spindle vertical moulding machines
BS EN 60254-2:1997 BS EN 60254-2:1997. Lead-acid traction batteries. Dimensions of cells and terminals and marking of polarity on cells
BS EN 13451-1:2001 BS EN 13451-1:2001. Swimming pool equipment. General safety requirements and test methods
BS EN 13451-3:2001 BS EN 13451-3:2001. Swimming pool equipment. Additional specific safety requirements and test methods for pool fittings for water treatment purposes
BS EN 13451-4:2001 BS EN 13451-4:2001. Swimming pool equipment. Additional specific safety requirements and test methods for starting platforms
BS EN 13451-5:2001 BS EN 13451-5:2001. Swimming pool equipment. Additional specific safety requirements and test methods for lane lines
BS EN 13451-6:2001 BS EN 13451-6:2001. Swimming pool equipment. Additional specific safety requirements and test methods for turning boards
BS EN 13451-7:2001 BS EN 13451-7:2001. Swimming pool equipment. Additional specific safety requirements and test methods for water polo goals
BS EN 13451-8:2001 BS EN 13451-8:2001. Swimming pool equipment. Additional specific safety requirements and test methods for leisure water features
BS EN 12566-1:2000 BS EN 12566-1:2000. Small wastewater treatment systems for up to 50 PT. Prefabricated septic tanks
BS 7892:2000 BS 7892:2000. Specification for seal coats on cement mortar lined ductile iron pipes and fittings
BS 8100-3:1999 BS 8100-3:1999. Lattice towers and masts. Code of practice for strength assessment of members of lattice towers and masts
BS EN 12320:2001 BS EN 12320:2001. Building hardware. Padlocks and padlock fittings. Requirements and test methods
DD ENV 1090-4:2001 DD ENV 1090-4:2001. Execution of steel structures. Supplementary rules for hollow section structures
ISO/TR10201 : 2001 EDTN 4 ISO/TR10201 : 2001 EDTN 4. ISO TR10201 Aerospace series - Standards for electronic instruments and systems -
BS EN 1763-1:2001 BS EN 1763-1:2001. Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase. Requirements for rubber
BS EN ISO 6165:2001, BS 6914-1:1997 BS EN ISO 6165:2001, BS 6914-1:1997. Earth-moving machinery. Basic types. Vocabulary
BS EN 60311:1998, IEC 60311:1997 BS EN 60311:1998, IEC 60311:1997. Electric irons for household or similar use. Methods for measuring performance
BS EN 13312-1:2001 BS EN 13312-1:2001. Biotechnology. Performance criteria for piping and instrumentation. General performance criteria
BS EN 13312-2:2001 BS EN 13312-2:2001. Biotechnology. Performance criteria for piping and instrumentation. Couplings
HB 10188:2001 HB 10188:2001. ISO 9001:2000 for Small Businesses. 2nd edition
HB 10189:2001 HB 10189:2001. ISO 9001:2000 in Brief
BS EN 13312-3:2001 BS EN 13312-3:2001. Biotechnology. Performance criteria for piping and instrumentation. Sampling and inoculation devices
KIT 76 KIT 76. Refrigeration and heat pumps. Safety and environment set (BS EN 378)
BS EN 13312-4:2001 BS EN 13312-4:2001. Biotechnology. Performance criteria for piping and instrumentation. Tubes and pipes
BS EN 13312-5:2001 BS EN 13312-5:2001. Biotechnology. Performance criteria for piping and instrumentation. Valves
BS EN 13312-6:2001 BS EN 13312-6:2001. Biotechnology. Performance criteria for piping and instrumentation. Equipment probes
WD/BSEN60350 : 1999 (TEXT) WD/BSEN60350 : 1999 (TEXT). Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance
BS EN ISO 14644-1:1999 BS EN ISO 14644-1:1999. Cleanrooms and associated controlled environments. Classification of air cleanliness
BS EN 12934:2000 BS EN 12934:2000. Feather and down. Composition labelling of processed feathers and down for use as sole filling material
BS EN 60335-2-47:1997, IEC 60335-2-47:1995 BS EN 60335-2-47:1997, IEC 60335-2-47:1995. Specification for safety of household and similar electrical appliances. Particular requirements. Commercial elec
BS EN 1653:1998 BS EN 1653:1998. Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units
ISO15733 : 2001 EDTN 1 ISO15733 : 2001 EDTN 1. ISO 15733 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for tensile stress-strain behaviour of continuous, fibre-reinforce
BS EN 61121:1999 BS EN 61121:1999. Tumble dryers for household use. Methods for measuring the performance
BS EN ISO 1061:1999 BS EN ISO 1061:1999. Plastics. Unplasticized cellulose acetate. Determination of free acidity
BS EN ISO 12209-2:2001 BS EN ISO 12209-2:2001. Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air. Threaded connections
BS 3692:2001 BS 3692:2001. ISO metric precision hexagon bolts, screws and nuts. Specification
BS EN 774:1996 BS EN 774:1996. Garden equipment. Hand held, integrally powered hedge trimmers. Safety
BS EN 786:1996 BS EN 786:1996. Garden equipment. Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers. Mechanical safety
BS 8666:2000 BS 8666:2000. Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete
BS EN ISO 6179:2001 BS EN ISO 6179:2001. Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique)
DD ENV 10247:1998 DD ENV 10247:1998. Micrographic examination of the nonmetallic inclusion content of steels using standard pictures
BS ISO 10965:1998 BS ISO 10965:1998. Textile floor coverings. Determination of electrical resistance
CWA 14162:2001 CWA 14162:2001. Datatyping for electronic data interchange
HB 10185:2001 HB 10185:2001. Eco-management Accounting
BS 7272-2:2000 BS 7272-2:2000. Writing and marking instruments. Specification for end closures
BS EN 60570:1997 BS EN 60570:1997. Electrical supply track systems for luminaires
BS EN ISO 662:2001, BS 684-1.10:1998 BS EN ISO 662:2001, BS 684-1.10:1998. Animal and vegetable fats and oils. Determination of moisture and volatile matter content
ISO/IEC19058 : 2001 EDTN 1 ISO/IEC19058 : 2001 EDTN 1. ISO/IEC19058 : 2001 Information technology -- Telecommunications and information exchange between systems -- Broadband Private Integrated Service
BS EN ISO 175:2001, BS 2782-8:Method 830A:1999 BS EN ISO 175:2001, BS 2782-8:Method 830A:1999. Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals
BS EN 60335-2-68:1999 BS EN 60335-2-68:1999. Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for spray extraction appliances,
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
