BIS Standards Catalogue
BS EN 61373:1999, IEC 61373:1999 BS EN 61373:1999, IEC 61373:1999. Railway applications. Rolling stock equipment. Shock and vibration tests
BS EN 61076-3-001:2000, IEC 61076-3-001:1999 BS EN 61076-3-001:2000, IEC 61076-3-001:1999. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data appl
BS EN 61076-3:2000, IEC 61076-3:1999 BS EN 61076-3:2000, IEC 61076-3:1999. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectan
BS EN 60598-2-23:1997, IEC 60598-2-23:1996 BS EN 60598-2-23:1997, IEC 60598-2-23:1996. Luminaires. Particular requirements. Extra low voltage lighting systems for filament lamps
ISO6362-5 : 2001 EDTN 2 (R08) ISO6362-5 : 2001 EDTN 2 (R08). ISO 6362-5 Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles. Extruded round, square and hexagonal bars - Tolera
BS EN 1213:2000 BS EN 1213:2000. Building valves. Copper alloy stopvalves for potable water supply in buildings. Tests and requirements
BS EN 60804:2001, IEC 60804:2001 BS EN 60804:2001, IEC 60804:2001. Integrating-averaging sound level meters
BS 5871-3:2001 BS 5871-3:2001. Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances. Decorative fuel effect gas appliances of hea
ISO12721 : 2000 (R05) ISO12721 : 2000 (R05) . ISO 12721 Non-destructive testing - Thermal neutron radiographic testing - Determination of L/D ratio
DD 250:1999 DD 250:1999. Road materials. Test method for the analysis of bituminous mixtures by ignition
BS ISO/IEC TR 13243:1999 BS ISO/IEC TR 13243:1999. Information technology. Quality of service. Guide to methods and mechanisms
ISO15605 : 2000 EDTN.1 ISO15605 : 2000 EDTN.1. ISO 15605 Adhesives - Sampling
BS EN 1538:2000 BS EN 1538:2000. Execution of special geotechnical works. Diaphragm walls
BS EN 1536:2000 BS EN 1536:2000. Execution of special geotechnical work. Bored piles
BS IEC TS 60825-6:1999 BS IEC TS 60825-6:1999. Safety of laser products. Safety of laser products with optical sources, exclusively used for visible information transmission to the human eye
BS EN 61512-1:1999, IEC 61512-1:1997 BS EN 61512-1:1999, IEC 61512-1:1997. Batch control. Models and terminology
DC00/241411 DC00/241411. Draft British Standard BS IEC 82045 MANAGEMENT DATA FOR TECHNICAL DOCUMENTS . Part1: Principles and methods
DC99/562488 DC99/562488. Draft British Standard, BS IEC 60601-2-18-A1, Medical electrical equipment. Part 2: Particular requirements for safety of endoscopic equipment
WD/ISO15187 : 2000 EDTN 1 WD/ISO15187 : 2000 EDTN 1. Manipulating industrial robots - Graphical user interfaces for programming and operation of robots (GUI-R)
DC99/403879 DC99/403879. Draft British Standard, BS EN 13619, Automatic identification of items - Optical characteristics for processing letters
ISO/IEC9594-9 : 1998 EDTN 3 ISO/IEC9594-9 : 1998 EDTN 3. ISO/IEC 9594-9 Information technology - Open Systems Interconnection - The Directory. Replication
ISO/IEC9594-8 : 1998 EDTN 3 ISO/IEC9594-8 : 1998 EDTN 3. ISO/IEC 9594-8 Information technology - Open Systems Interconnection - The Directory. Authentication framework
WD/ISO/IEC9594-7 : 1998 EDTN 3 WD/ISO/IEC9594-7 : 1998 EDTN 3. ISO/IEC 9594-7 Information technology - Open Systems Interconnection - The Directory. Selected object classes
ISO/IEC9594-6 : 1998 EDTN 3 ISO/IEC9594-6 : 1998 EDTN 3. ISO/IEC 9594-6 Information technology - Open Systems Interconnection - The Directory. Selected attribute types
ISO/IEC9594-5 : 1998 EDTN 3 ISO/IEC9594-5 : 1998 EDTN 3. ISO/IEC 9594-5 Information technology - Open Systems Interconnection - The Directory. Protocol specifications
WD/ISO/IEC9594-4 : 1998 EDTN.3 WD/ISO/IEC9594-4 : 1998 EDTN.3. ISO/IEC 9594-4 Information technology - Open Systems Interconnection - The Directory. Procedures for distributed operation
ISO/IEC9594-3 : 1998 EDTN 3 ISO/IEC9594-3 : 1998 EDTN 3. ISO/IEC 9594-3 Information technology - Open Systems Interconnection - The Directory. Abstract service definition
BS EN 60990:2000, IEC 60990:1999 BS EN 60990:2000, IEC 60990:1999. Methods of measurement of touch current and protective conductor current
BS EN ISO 2064:2000 BS EN ISO 2064:2000. Metallic and other inorganic coatings. Definitions and conventions concerning the measurement of thickness
BS ISO/IEC 9979:1999 BS ISO/IEC 9979:1999. Information technology. Security techniques. Procedures for the registration of cryptographic algorithms
BS ISO/IEC 6592:2000 BS ISO/IEC 6592:2000. Information technology. Guidelines for the documentation of computer-based application systems
BS IEC 60748-2-11:1999 BS IEC 60748-2-11:1999. Semiconductor devices. Integrated circuits. Digital integrated circuits. Blank detail specification for single supply integrated circuit, electrically er
ISO/IECTR15294 : 2000 ISO/IECTR15294 : 2000 . ISO/IEC TR 15294 Methods for data flow control and synchronous and asynchronous DTE-DCE interfaces
BS EN 60282-1:1996, BS 2692-1:1996,IEC 60282-1:1994 BS EN 60282-1:1996, BS 2692-1:1996,IEC 60282-1:1994. High-voltage fuses. Current-limiting fuses
ISO/IEC8208 : 2000 EDTN.4 ISO/IEC8208 : 2000 EDTN.4. ISO/IEC 8208 Information processing systems - Data communications - X.25 packet level protocol for data terminal equipment
DC99/242702 DC99/242702. Draft British Standard, BS IEC 60287-1-1-AMDX, Electric cables - Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses. Gene
BS EN 50215:1999 BS EN 50215:1999. Railway applications. Testing of rolling stock after completion of construction and before entry into service
BS EN 50206-2:1999 BS EN 50206-2:1999. Railway applications. Rolling stock. Pantographs: characteristics and tests. Pantographs for metros and light rail vehicles
BS EN 50206-1:1999 BS EN 50206-1:1999. Railway applications. Rolling stock. Pantographs: characteristics and tests. Pantographs for main line vehicles
BS EN 50125-1:1999 BS EN 50125-1:1999. Railway applications. Environmental conditions for equipment. Equipment on board rolling stock
BS EN 50146:2000 BS EN 50146:2000. Cable ties for electrical installations
DC99/564192 DC99/564192. Draft British Standard BS EN ISO 9241-3-A1 Ergonomic requirements for office work with visual display terminals (VDTs). Part 3: Visual display requirements
BS EN 61808:2001, IEC 61808:1999 BS EN 61808:2001, IEC 61808:1999. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride button rechargeable sin
DC99/703904 DC99/703904. Draft British Standard, BS 4466, Specification for scheduling, dimensioning, bending and cutting of steel, reinforcement for concrete
DD ENV 1991-2-6:2000 DD ENV 1991-2-6:2000. Basis of design and actions on structures. Actions on structures. Actions during execution. Actions during execution
WD/ISO3842 : 2001 EDTN 3 WD/ISO3842 : 2001 EDTN 3. ISO 3842 Road vehicles - Fifth wheels - Interchangeability
BS EN 60439-5:1996, IEC 60439-5:1996 BS EN 60439-5:1996, IEC 60439-5:1996. Specification for low-voltage switchgear and controlgear assemblies. Particular requirements for assemblies intended to be in
BS 7877:1999 BS 7877:1999. Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers
BS EN 1420-1:1999 BS EN 1420-1:1999. Influence of organic materials on water intended for human consumption. Determination of odour and flavour assessment of water in piping systems. Influence of orga
ISO3064 : 2000 EDTN 2 ISO3064 : 2000 EDTN 2. ISO 3064 Oil of petitgrain, Paraguayan type (Citrus aurantium L. subsp. aurantium, syn. Citrus aurantium L. subsp. amara var. pumilia
BS EN 1151:1999 BS EN 1151:1999. Pumps. Rotodynamic pumps. Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations. Requirement
BS EN 1293:1999 BS EN 1293:1999. General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers
BS EN 773:1999 BS EN 773:1999. General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
DD ENV 12299:1999 DD ENV 12299:1999. Railway applications. Ride comfort for passengers. Measurement and evaluation
PD CR 13455:1999 PD CR 13455:1999. Soil improvers and growing media. Guidelines for the safety of users, the environment and plants
DC00/240716 DC00/240716. Draft British Standard BS CISPR 11-A3 Specification - Limits and methods of measurement of radio interference characteristics of industrial, scientific and medical [ISM] radio
WD/ISO7396-2 : 2000 EDTN.1 WD/ISO7396-2 : 2000 EDTN.1. ISO 7396-2 Medical gas pipeline systems. Part 2: Anaesthetic gas scavenging disposal systems
BS EN 13829:2001 BS EN 13829:2001. Thermal performance of buildings. Determination of air permeability of buildings. Fan pressurization method
BS EN 50152-3-2:2001 BS EN 50152-3-2:2001. Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Measurement, control and protection devices for specific use in a.c.
DD ENV 50152-3-1:1999 DD ENV 50152-3-1:1999. Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Measurement, control and protection devices for specific use in a.c
WD/ISO5359 : 2000 EDTN 2 WD/ISO5359 : 2000 EDTN 2. ISO 5359 Low-pressure hose assemblies for use with medical gases
BS EN 50239:2000 BS EN 50239:2000. Railway applications. Radio remote control system of traction vehicle for freight traffic
DD ENV 50129:1999 DD ENV 50129:1999. Railway applications. Safety related electronic systems for signalling
BS EN ISO 4042:2000 BS EN ISO 4042:2000. Fasteners. Electroplated coatings
BS 7870-4.20:1999 BS 7870-4.20:1999. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated vol
BS 7870-4.11:1999 BS 7870-4.11:1999. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated vol
BS 7870-4.10:1999 BS 7870-4.10:1999. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated vol
BS EN 61310-3:1999, IEC 61310-3:1999 BS EN 61310-3:1999, IEC 61310-3:1999. Safety of machinery. Indication, marking and actuation. Requirements for the location and operation of actuators
PD R009-003:1999 PD R009-003:1999. Railway applications. Guide to the specification of a guided transport system
BS IEC 60489-2:1991 BS IEC 60489-2:1991. Radio equipment used in mobile services. Methods of measurement. Transmitters employing A3E, F3E or G3E emissions
ISO3214 : 2000 EDTN 2 ISO3214 : 2000 EDTN 2. ISO 3214 Oil of Litsea cubeba (Litsea cubeba Pers.)
BS IEC 60489-6:1999 BS IEC 60489-6:1999. Radio equipment used in mobile services. Methods of measurement. Data equipment
ISO/IECTR15067-3 : 2000 EDTN1 ISO/IECTR15067-3 : 2000 EDTN1. ISO/IEC TR 15067-3 Information Technology - Home Electronic Systems (HES) Application model. Model of an energy management system for HES
BS EN ISO 7518:1999 BS EN ISO 7518:1999. Construction drawings. Simplified representation of demolition and rebuilding
BS EN 60086-4:2000, IEC 60086-4:2000 BS EN 60086-4:2000, IEC 60086-4:2000. Primary batteries. Safety standard for lithium batteries
WD/ISO11140-5 : 2000 EDTN 1 WD/ISO11140-5 : 2000 EDTN 1. ISO 11140-5 Sterilization of healthcare products - Chemical indicators. Part 5: Class 2 Indicators for air removal test sheets and packs
WD/ISO11140-3 : 2000 EDTN 1 WD/ISO11140-3 : 2000 EDTN 1. ISO 11140-3 Sterilization of healthcare products - Chemical indicators. Part 3: Steam penetration test with user-assembled and preassembled tes
DD ENV 13800:2000 DD ENV 13800:2000. Lead and lead alloys. Analysis by flame atomic absorption spectromerty (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), without separation of t
DC99/565740 DC99/565740. Draft British Standard, BS ISO 15383, Protective gloves for structural fire fighting, Laboratory test methods and performance requirements
ISO5577 : 2000 ISO5577 : 2000 . ISO 5577 Non-destructive testing - Ultrasonic inspection - Vocabulary
DC99/402577 DC99/402577. Draft British Standard, BS ISO 8502-12, Preparation of steel substrates before application of paints and related, products - Methods for the assessment of surface cleanliness.
ISO/IECTR10171 : 2000 EDTN 2 ISO/IECTR10171 : 2000 EDTN 2. ISO/IEC TR 10171 Information technology - Telecommunications and information exchange between systems - List of standard data link layer prot
BS EN 60834-1:2000, IEC 60834-1:1999 BS EN 60834-1:2000, IEC 60834-1:1999. Teleprotection equipment of power systems. Performance and testing. Command systems
BS EN 50261:1999 BS EN 50261:1999. Railway applications. Mounting of electronic equipment
BS 5266-5:1999 BS 5266-5:1999. Emergency lighting. Specification for component partsof optical fibre systems
DC99/716062 DC99/716062. Draft British Standard, BS ISO 15136, Petroleum and natural gas industries - Drilling and production equipment -, Downhole progressive cavity pumps
BS EN 60519-4:1997, IEC 60519-4:1995 BS EN 60519-4:1997, IEC 60519-4:1995. Safety in electroheat installations. Particular requirements for arc furnace installations
DC99/100269 DC99/100269. Draft British Standard, BS 5950-2 Amendment No. 2, Structural use of steelwork in building, Specification for materials,fabrication and erection; hot-rolled sections
DD ENV 1992-2:2001 DD ENV 1992-2:2001. Eurocode 2: Design of concrete structures. Concrete bridges
DC99/122614 DC99/122614. Draft British Standard, BS EN13655, Mulching thermoplastic films for use in agriculture and horticulture
DC99/621481 DC99/621481. Draft British Standard, BS ISO 10196, Document imaging applications - Recommendations for the creation of, original documents
BS EN 60204-11:2001, IEC 60204-11:2000 BS EN 60204-11:2001, IEC 60204-11:2000. Safety of machinery. Electrical equipment of machines. Requirements for HV equipment for voltages above 1000 V a.c. or 15
ISO/TR13732-2 : 2001 EDTN 1 ISO/TR13732-2 : 2001 EDTN 1. ISO TR 13732-2 Ergonomics of the thermal environment - Method for the assessment of human responses to contact with surfaces . Part 2: Moderate
ISO15178 : 2000 EDTN 1 ISO15178 : 2000 EDTN 1. ISO 15178 Soil quality - Determination of total sulfur by dry combustion
DD ENV 1090-3:2000 DD ENV 1090-3:2000. Execution of steel structures. Supplementary rules for high yield strength steels
ISO5755 : 2001 EDTN 2 ISO5755 : 2001 EDTN 2. ISO5755 : 2001 Sintered metal products - Material specifications
BS EN 45544-3:2000 BS EN 45544-3:2000. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Performance requiremen
BS EN 45544-2:2000 BS EN 45544-2:2000. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Performance requiremen
BS EN 45544-1:2000 BS EN 45544-1:2000. Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. General requirements a
BS EN 50055:1999 BS EN 50055:1999. Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (V/V) methane in air
BS EN 50054:1999 BS EN 50054:1999. Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
BS EN 50157-2-3:1999 BS EN 50157-2-3:1999. Domestic and similar electronic equipment interconnection requirements: AV. link. System oriented application. System oriented application
BS EN 50201:1999 BS EN 50201:1999. Interfaces for DVB-IRD
BS EN 50241-2:1999 BS EN 50241-2:1999. Specification for open path apparatus for the detection of combustible or toxic gases and vapours. Performance requirements for apparatus for the detection of co
BS EN 60034-2:1999 BS EN 60034-2:1999. Rotating electrical machines. Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles
BS 4089:1999 BS 4089:1999. Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases
DC99/203697 DC99/203697. Draft British Standard, BS IEC 60191-2-A28, Mechanical standardization of semiconductor devices. Dimensions. Plastic small outline package J-lead (P-SOJ), 10,16 mm body family
BS EN ISO 11591:2001 BS EN ISO 11591:2001. Small craft, engine driven. Field of vision from helm position
DD ENV 13563:2000 DD ENV 13563:2000. Traffic control equipment. Vehicle detectors
BS EN 12675:2001 BS EN 12675:2001. Traffic signal controllers. Functional safety requirements
BS EN 50181:1999 BS EN 50181:1999. Plug-in type bushings above 1 kV up to 36 kV and from 250 A to 1.25 kA for equipment other than liquid filled transformers
BS EN 50180:1999 BS EN 50180:1999. Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers
BS EN 50152-1:1999 BS EN 50152-1:1999. Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Single-phase circuit-breakers with Um above 1 kV
BS EN 50152-2:1999 BS EN 50152-2:1999. Railway applications. Fixed installations. Particular requirements for a.c. switchgear. Single-phase disconnectors, earthing switches and switches with Um above
DC99/621458 DC99/621458. Draft British Standard, BS ISO 14991, Electronic folder interchange datastream
BS EN 61169-32:2000, IEC 61169-32:1999 BS EN 61169-32:2000, IEC 61169-32:1999. Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw co
WD/ISO15002 : 2000 EDTN 1 WD/ISO15002 : 2000 EDTN 1. ISO 15002 Flow-metering devices for connection to terminal units of medical gas pipeline systems
WD/ISO/IEC9594-10 : 1998 EDTN.1 WD/ISO/IEC9594-10 : 1998 EDTN.1. ISO/IEC 9594-10 Information technology - Open Systems Interconnection - The Directory. Use of Systems Management for Administration of
BS EN ISO 8442-6:2001 BS EN ISO 8442-6:2001. Materials and articles in contact with foodstuffs. Cutlery and table holloware. Lightly silver plated table holloware protected by laquer
DC00/101644 DC00/101644. Draft British Standard BS 5628-1-A2 Code of practice for use of masonry. Part 1 : Structual use of unreinforced masonry
BS EN 50267-2-3:1999 BS EN 50267-2-3:1999. Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures. Determination of degree
BS EN 50267-2-2:1999 BS EN 50267-2-2:1999. Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures. Determination of degree
BS EN 50265-2-2:1999 BS EN 50265-2-2:1999. Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable. Procedures
BS EN 50265-2-1:1999 BS EN 50265-2-1:1999. Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable. Procedures
ISO9606-5 : 2000 ISO9606-5 : 2000 . ISO 9606-5 Approval testing of welders - Fusion welding. Titanium and titanium alloys
BS EN 61114-1:1999, IEC 61114-1:1999 BS EN 61114-1:1999, IEC 61114-1:1999. Methods of measurement on receiving antennas for satellite broadcast transmissions in the 12 GHz band. Electrical measurement
BS EN 12193:1999 BS EN 12193:1999. Light and lighting. Sports lighting
WD/ISO/IECTR14543-3 : 2000 EDTN1 WD/ISO/IECTR14543-3 : 2000 EDTN1. ISO/IEC TR 14543-3 Information technology - Home Electronic System (HES) architecture. Communications layers
WD/ISO/IECTR14543-2 : 2000 EDTN1 WD/ISO/IECTR14543-2 : 2000 EDTN1. ISO/IEC TR 14543-2 Information technology - Home Electronic System (HES) architecture. Device modularity
ISO12891-3 : 2000 (R05) ISO12891-3 : 2000 (R05). ISO 12891-3 Implants for surgery - Retrieval and analysis of surgical implants. Part 3: Analysis of retrieved polymeric surgical implants
BS ISO/IEC TR 15504-5:1999 BS ISO/IEC TR 15504-5:1999. Information technology. Software process assessment. An assessment model and indicator guidance
BS 7000-1:1999 BS 7000-1:1999. Design management systems. Guide to managing innovation
ISO789-12 : 2000 ISO789-12 : 2000 . ISO 789-12 Agricultural tractors-Test procedures. Low temperature starting
BS EN 1838:1999, BS 5266-7:1999 BS EN 1838:1999, BS 5266-7:1999. Lighting applications. Emergency lighting
BS EN 50298:1999 BS EN 50298:1999. Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
ISO1342 : 2000 EDTN 2 ISO1342 : 2000 EDTN 2. ISO 1342 Oil of rosemary (Rosmarinus officinalis L.)
ISO1272 : 2000 EDTN 2 ISO1272 : 2000 EDTN 2. ISO 1272 Essential oils - Determination of phenols content
BS EN 483:1999+A4:2007 BS EN 483:1999+A4:2007. Gas-fired central heating boilers. Type C boilers of nominal heat input not exceeding 70 kW
98/706084 DC 98/706084 DC. Qualification of domestic hot water function of gas-fired appliances for domestic use (prEN 13203)
DC00/714133 DC00/714133. Draft British Standard BS EN 13951 Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use
BS EN 1194:1999 BS EN 1194:1999. Timber structures. Glued laminated timber. Strength classes and determination of characteristic values
BS EN 61721:2000, IEC 61721:1995 BS EN 61721:2000, IEC 61721:1995. Susceptibility of a photovoltaic (PV) module to accidental impact damage (resistance to impact test)
BS EN 61702:2000, IEC 61702:1995 BS EN 61702:2000, IEC 61702:1995. Rating of direct coupled photovoltaic (PV) pumping systems
BS EN 61701:2000, IEC 61701:1995 BS EN 61701:2000, IEC 61701:1995. Salt mist corrosion testing of photovoltaic (PV) modules
BS EN 50209:1999 BS EN 50209:1999. Test of insulation of bars and coils of high-voltage machines
DD ENV 50123-7-1:1999 DD ENV 50123-7-1:1999. Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems. Applicat
BS EN 50123-4:1999 BS EN 50123-4:1999. Railway applications. Fixed installations. d.c. switchgear. Outdoor d.c. in-line switch-disconnectors, disconnectors and d.c. earthing switches
BS EN 50123-6:1999 BS EN 50123-6:1999. Railway applications. Fixed installations. D.C. switchgear. D.C. switchgear assemblies
DD ENV 1991-3:2000 DD ENV 1991-3:2000. Eurocode 1. Basis of design and actions on structures. Traffic loads on bridges (United Kingdom Application Document)
PD CR 1750:1999, CR 1750:1999 PD CR 1750:1999, CR 1750:1999. Identification card systems. Inter-sector messages between devices and hosts. Acceptor to acquirer messages
ISO11162 : 2001 EDTN 1 ISO11162 : 2001 EDTN 1. ISO 11162 Green pepper (Piper nigrum L.) in brine - Specification
ISO11226 : 2000 EDTN 1 ISO11226 : 2000 EDTN 1. ISO 11226 Ergonomics - Evaluation of working postures
ISO7086-2 : 2000 ISO7086-2 : 2000 . ISO 7086-2 Glass ware in contact with food - Release of lead and cadmium. Permissible limits
ISO7086-1 : 2000 ISO7086-1 : 2000 . ISO 7086-1 Glass ware in contact with food - Release of lead and cadmium. Method of test
ISO13658 : 2000 ISO13658 : 2000 . ISO 13658 Zinc sulfide concentrates - Determination of zinc content - Hydroxide precipitation and EDTA titrimetric method
ISO13545 : 2000 ISO13545 : 2000 . ISO 13545 Lead sulfide concentrates - Determination of lead content - EDTA titration method after acid digestion
BS EN 61599:2000, IEC 61599:1999 BS EN 61599:2000, IEC 61599:1999. Videodisk players. Methods of measurement
DC99/564775 DC99/564775. Draft British Standard, ISO/IEC DIS80416-1, General principles for the creation of graphical symbols. Part 1: Graphical symbols for use on equipment
DC99/703392 DC99/703392. Draft British Standard, BS EN 60839-7-7, Alarm systems. Part 7-7: Message formats and protocols for serial data interfaces in, alarm transmission systems - Alarm system interf
DC99/703386 DC99/703386. Draft British Standard, BS EN 60839-7-1, Alarm systems. Part 7-1: Message formats and protocols for serial data interfaces in, alarm transmission systems - General
DC99/703395 DC99/703395. Draft British Standard, BS EN 60839-7-20, Alarm systems. Part 7-20: Message formats and protocols for serial data interfaces in, alarm transmission systems - Terminal interfac
DC99/703393 DC99/703393. Draft British Standard, BS EN 60839-7-11, Alarm systems. Part 7-11: Message formats and protocols for serial data interfaces in, alarm transmission systems - Serial protocol f
DC99/703391 DC99/703391. Draft British Standard, BS EN 60839-7-6, Alarm systems. Part 7-6: Message formats and protocols for serial data interfaces in alarm transmission systems - Alarm system interfa
DC99/703390 DC99/703390. Draft British Standard, BS EN 60839-7-5, Alarm systems. Part 7-5: Message formats and protocols for serial data interfaces in, alarm transmission systems - Alarm system interf
DC99/703389 DC99/703389. Draft British Standard, BS EN 60839-7-4, Alarm systems. Part 7-4: Message formats and protocols for serial data interfaces in, alarm transmission systems - Common transport la
DC99/703388 DC99/703388. Draft British Standard, BS EN 60839-7-3, Alarm systems. Part 7-3: Message formats and protocols for serial data interfaces in, alarm transmission systems - Common data link la
DC99/703387 DC99/703387. Draft British Standard, BS EN 60839-7-2, Alarm systems. Part 7-2: Message formats and protocols for serial data interfaces in, alarm transmission systems - Common application
DC99/703394 DC99/703394. Draft British Standard, BS EN 60839-7-12, Alarm systems. Part 7-12: Message formats and protocols for serial data interfaces in, alarm transmission systems - PTT interfaces fo
DC99/566932 DC99/566932. Draft British Standard, BS ISO 13641-2, Water quality - Determination of inhibition of activity of, anaerobic bacteria. Part 2: Test at low biomass concentrations
ISO/TR13881 : 2000 ISO/TR13881 : 2000 . ISO 13881 Petroleum & Natural Gas Industries-Classification of Products & Services
BS EN 50267-2-1:1999 BS EN 50267-2-1:1999. Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures. Determination of the amo
DC99/652593 DC99/652593. Draft British Standard, BS ISO/IEC 15816, Information technology - Security techniques -, Security information objects (SIOs)
BS EN 726-5:1999 BS EN 726-5:1999. Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Payment methods
WD/ISO/IEC14496-4 : 2000(CD-ROM) WD/ISO/IEC14496-4 : 2000(CD-ROM). ISO/IEC 14496-4 Information technology - Coding of audio-visual objects. Conformance testing
WD/ISO/IEC14496-2 : 1999 WD/ISO/IEC14496-2 : 1999 . ISO/IEC 14496-2 Information technology - Coding of audio visual objects. Visual
DD ENV 13376:1999 DD ENV 13376:1999. Geographic information. Data description. Rules for application schemas
BS 7870-6.1:1999 BS 7870-6.1:1999.
BS ISO/IEC 14519:1999 BS ISO/IEC 14519:1999. Information technology. POSIX Ada language interfaces. Binding for system application program interface (API). Realtime extensions
DC99/710043 DC99/710043. Draft British Standard BS ISO 12214 Road vehicles - Drivers direction of motion stereotypes for hand controls
DD ENV 387:1999 DD ENV 387:1999. Glued laminated timber. Large finger joints. Performance requirements and minimum production requirements
DC99/614043 DC99/614043. Draft British Standard, BS ISO 10303-209, Industrial automation systems and integration -, Product data representation and exchange. Application protocol: Composite and metall
ISO14273 : 2000 EDTN.1 ISO14273 : 2000 EDTN.1. ISO 14273 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
ISO14272 : 2000 EDTN.1 ISO14272 : 2000 EDTN.1. ISO 14272 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
ISO14271 : 2000 EDTN.1 ISO14271 : 2000 EDTN.1. ISO 14271 Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)
ISO14270 : 2000 EDTN.1 ISO14270 : 2000 EDTN.1. ISO 14270 Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
BS EN 726-7:1999 BS EN 726-7:1999. Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Security module
BS EN 477:1999 BS EN 477:1999. Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Determination of the resistance to impact of main profiles by falling mass
BS EN 478:1999 BS EN 478:1999. Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Appearance after exposure at 150°C. Test method
BS EN 479:1999 BS EN 479:1999. Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Determination of heat reversion
ISO14181 : 2000 EDTN 1 ISO14181 : 2000 EDTN 1. ISO 14181 Animal feeding stuffs - Determination of organochlorine pesticide residues content
DD ENV 1995-1-2:2000 DD ENV 1995-1-2:2000. Eurocode 5. Design of timber structures. General rules. Structural fire design (together with United Kingdom National Application Document)
BS EN 50223:2001 BS EN 50223:2001. Automatic electrostatic application equipment for flammable flock material
BS EN 60335-2-24:1999, IEC 60335-2-24, Ed 4.1:1999 BS EN 60335-2-24:1999, IEC 60335-2-24, Ed 4.1:1999. Specification for safety of household and similar electrical appliances. Particular requirements
ISO/IEC9314-26 : 2001 EDTN 1 ISO/IEC9314-26 : 2001 EDTN 1. ISO/IEC9314-26 : 2001 Information technology - Fibre Distributed Data Interface (FDDI). Part 26: MAC ATS
ISO/IEC9314-20 : 2001 EDTN 1 ISO/IEC9314-20 : 2001 EDTN 1. ISO/IEC 9314-20 Information technology - Fibre Distributed Data Interface (FDDI). Part 20: Abstract test suite for FDDI physical medium depen
ISO/IEC9314-21 : 2000 EDTN1 ISO/IEC9314-21 : 2000 EDTN1. ISO/IEC 9314-21 Information technology - Fibre Distributed Data Interface (FDDI). Part21: Abstract test suite for FDDI physical layer protocol
DC99/710685 DC99/710685. Draft British Standard, , Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
BS EN 527-1:2000 BS EN 527-1:2000. Office furniture. Work tables and desks. Dimensions
DC99/203699 DC99/203699. Draft British Standard, BS IEC 60191-2-A20, Mechanical standardization of semiconductor devices. Dimensions. Plastic thin small outline package(P-TSOP II)10.16 mm body family
BS 1722-2:2000 BS 1722-2:2000. Fences. Specification for strained wire and wire mesh netting fences
ISO12945-2 : 2000 (R05) EDTN 1 ISO12945-2 : 2000 (R05) EDTN 1. ISO 12945-2 Textiles - Determination of the resistance to pilling and change of appearance of fabrics. Modified Martindale method
WD/ISO5173 : 2000 EDTN.2 WD/ISO5173 : 2000 EDTN.2. ISO 5173 Destructive tests on welds in metallic materials - Bend tests
ISO4136 : 2001 EDTN 2 ISO4136 : 2001 EDTN 2. ISO 4136 Destructive tests on welds in metallic materials - Transverse tensile test
BS 5266-4:1999 BS 5266-4:1999. Emergency lighting. Code of practice for design, installation, maintenance and use of optical fibre systems
DC99/565154 DC99/565154. Draft British Standard, BS ISO 7176-19, Wheelchairs. Part 19: Wheeled mobility devices for use in motor vehicles
BS ISO TR 11925-1:1999 BS ISO TR 11925-1:1999. Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame. Guidance on ignitability
BS 8233:1999 BS 8233:1999. Sound insulation and noise reduction for buildings. Code of practice
BS EN 60335-2-86:2001 BS EN 60335-2-86:2001. Specification for safety of household and similar electrical appliances. Particular requirements for electric fishing machines. Particular requirements for
BS 5900:1999 BS 5900:1999. Specification for powered domestic lifts with partially enclosed cars and no lift-well enclosures
BS ISO 8368:1999 BS ISO 8368:1999. Hydrometric determinations. Flow measurements in open channels using structures. Guidelines for the selection of structure
DC99/121207 DC99/121207. Draft British Standard BS EN ISO 6296 Liquid petroleum products - Determination of water - Karl Fischer method
DC99/716304 DC99/716304. Draft British Standard EN 3733-004 Aerospace Series - Connector optical circular, single channel, coupled by self-locking ring - Operating temperatures up to 150 ?C continuous
DC99/716303 DC99/716303. Draft British Standard EN 3733-002 Aerospace Series - Connector optical circular, single channel, coupled by self-locking ring - Operating temperatures up to 150 ?C continuous
DC99/565079 DC99/565079. Draft British Standard BS IEC 60601-2-10-A1 Medical electrical equipment. Part 2-10: Particular requirements for safety of nerve and muscle stimulators
ISO/IECTR10021-11 : 2000 EDTN 1 ISO/IECTR10021-11 : 2000 EDTN 1. ISO/IEC 10021-11 Information technology - Message Handling Systems (MHS):. Methodology for management of MHS routing
DC99/711311 DC99/711311. Draft British Standard, BS EN 13615, Methods for the analysis of ingot tin. Determination of impurity element contents in tin grades Sn 99.90 and, Sn 99.85 by atomic spectrome
BS ISO/IEC 13211-2:2000 BS ISO/IEC 13211-2:2000. Information technology. Programming languages. Prolog. Modules
DC99/124737 DC99/124737. Draft British Standard, BSISO15972-1, Natural gas - Measurement of properties - Single components and, condensation properties. Part 1. Water content and water dew-point deter
BS ISO 12651:1999 BS ISO 12651:1999. Electronic imaging. Vocabulary
BS ISO 3272-5:1999 BS ISO 3272-5:1999. Microfilming of technical drawings and other drawing office documents. Test procedures for diazo duplicating of microfilm images in aperture cards
DD ENV 13834:2000 DD ENV 13834:2000. Cookware. Ovenware for use in domestic thermal ovens
WD/ISO10385-1 : 2000 EDTN 1 WD/ISO10385-1 : 2000 EDTN 1. ISO 10385-1 Measurement of water flow in closed conduits-Meters for hot water. Specification requirements
ISO9652-2 : 2000 ISO9652-2 : 2000 . ISO 9652-3 Masonry. unreinforced masonry design by simple ru les
BS EN 495-5:2001 BS EN 495-5:2001. Flexible sheets for waterproofing. Determination of foldability at low temperature. Plastic and rubber sheets for roof waterproofing
ISO657-14 : 2000 ISO657-14 : 2000 . ISO 657-14 Hot rolled steel sections. Hot-finished structural hollow sections -dimensions and sectional properties
BS ISO 1116:1999 BS ISO 1116:1999. Micrographics. 16 mm and 35 mm microfilm spools and reels. Specifications
WD/ISO/IEC11179-2 : 2000 EDTN1 WD/ISO/IEC11179-2 : 2000 EDTN1. ISO/IEC 11179-2 Information technology - Specification and standardization of data elements. Classification for Data Elements
ISO1087-2 : 2000 ISO1087-2 : 2000 . ISO 1087-2 Terminology work - Vocabulary. Computer applications
WD/ISO3272-6 : 2000 WD/ISO3272-6 : 2000 . ISO 3272-6 Microfilming of technical drawings and other drawing office documents. Part 6 Enlargement from 35 mm microfilm - Quality criteria and control
ISO11970 : 2001 EDTN.1 ISO11970 : 2001 EDTN.1. ISO 11970 Specification and approval of welding procedures for production welding of steel castings
ISO2426-1 : 2000 EDTN.1 ISO2426-1 : 2000 EDTN.1. ISO 2426-1 Plywood - Classification by surface appearance. Part 1: General
DC99/108663 DC99/108663. Draft British Standard BS EN 933-6 Tests for geometrical properties of aggregates. Assessment of surface characteristics - Flow coefficient of aggregates
WD/ISO12742 : 2000 WD/ISO12742 : 2000 . ISO 12742 Copper, lead and zinc sulphide concentrates - Determination of transportable moisture limit - Flow table method
ISO6362-3 : 2001 EDTN 2 (R08) ISO6362-3 : 2001 EDTN 2 (R08). ISO 6362-3 Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles. Part 3: Extruded rectangular bars - Tolerances on
WD/ISO/IECTR14543-1 : 2000 EDTN1 WD/ISO/IECTR14543-1 : 2000 EDTN1. ISO/IEC TR 14543-1 Information technology - Home Electronic System (HES) architecture. Introduction
ISO9015-1 : 2001 EDTN 1 ISO9015-1 : 2001 EDTN 1. ISO 9015 Welding - Welded joints in metallic materials - Hardness testing. Hardness test on arc welded joints
WD/ISO/IEC15506 : 2000 WD/ISO/IEC15506 : 2000 . ISO/IEC 15506 SECOND EDITION Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network
WD/ISO/IEC15505 : 2000 WD/ISO/IEC15505 : 2000 . ISO/IEC 15505 SECOND EDITION Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network
BS 2X 26:2001 BS 2X 26:2001. Doping and finishing schemes for fabric covered aircraft
ISO/IEC11572 : 2000 ISO/IEC11572 : 2000 . ISO/IEC 11572 THIRD EDITION Information technology - telecommunications and information exchange between systems - Private integrated services network (PISN)
BS 7799-1:1999 BS 7799-1:1999. Information security management. Code of practice for information security management
ISO7291 : 1999 ISO7291 : 1999 . ISO 7291 Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar
WD/ISO9187-1 : 2000 WD/ISO9187-1 : 2000 . ISO 9187-1 Injection equipment for medical use. Part 1: Ampoules for injectables
ISO/IEC14776-381 : 2000 EDTN 1 ISO/IEC14776-381 : 2000 EDTN 1. ISO/IEC 14776-381 Information technology - Small computer system interface. Optical memory card device commands (SCSI OMC)
ISO11452-3 : 2001 EDTN 2 ISO11452-3 : 2001 EDTN 2. ISO 11452-3 Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Component test methods. Transverse electromagneti
BS 7835:2000 BS 7835:2000. Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having lo
PD 6662:2000 PD 6662:2000. Scheme for the application of European Standards for intruder alarm systems
BS EN 1615:2000 BS EN 1615:2000. Enteral feeding catheters and enteral giving sets for single use and their connectors. Design and testing
ISO12131-3 : 2001 EDTN 1 ISO12131-3 : 2001 EDTN 1. ISO 12131-3 Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions. Part 3: Guide values for the calculation of thrust
ISO12131-2 : 2001 EDTN 1 ISO12131-2 : 2001 EDTN 1. ISO12131-2 : 2001 Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions. Part 2: Functions for the calculation of thr
ISO12131-1 : 2001 EDTN 1 ISO12131-1 : 2001 EDTN 1. ISO12131-1 : 2001 Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions. Part 1: Calculation of thrust pad bearings
BS 6920-2.4:2000 BS 6920-2.4:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of tes
BS 6920-2.3:2000 BS 6920-2.3:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of
BS 6920-3:2000 BS 6920-3:2000. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. High temperatu
WD/ISO/IEC13239 : 2000 WD/ISO/IEC13239 : 2000 . ISO/IEC 13239 SECOND EDITION Information technology - Telecommunications and information exchange between systems - High-level data link control procedu
BS 5884:1999 BS 5884:1999. Magnetic materials. Methods for the determination of the relative magnetic permeability of feebly magnetic materials
BS 7959-2:2000 BS 7959-2:2000. Materials used for the control of liquid spillages. Determination of water repellency or buoyancy for hydrophobic (oil sorbent) materials
BS 7957:2000 BS 7957:2000. Vitreous enamel systems. Determination of self-cleaning properties
BS 5577:1999 BS 5577:1999. Specification for table cutlery with non-metallic handles
ISO15500-1 : 2000 ISO15500-1 : 2000 . ISO 15500-1 Road vehicles - compressed natural gas fuelling system. General requirements and definitions
BS EN 186310:1999 BS EN 186310:1999. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type MF
BS ISO/IEC 14598-2:2000 BS ISO/IEC 14598-2:2000. Information technology. Software production evaluation. Planning and management
BS 7664:2000 BS 7664:2000. Specification for undercoat and finishing paints
ISO14372 : 2000 EDTN.1 ISO14372 : 2000 EDTN.1 . ISO 14372 Welding consumables - Determination of mositure resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
ISO6847 : 2000 ISO6847 : 2000 . ISO 6847 Welding consumables - Deposition of a weld metal pad for chemical analysis
BS 7937:2000 BS 7937:2000. Specification for portable fire extinguishers for use on cooking oil fires (class F)
BS 7028:1999 BS 7028:1999. Eye protection for industrial and other uses. Guidance on selection, use and maintenance
BS 7965:2000 BS 7965:2000. The selection, installation, operation and calibration of diagonal path transit time ultrasonic flowmeters for industrial gas applications
BS 7954:1999 BS 7954:1999. Beaded desiccant activated alumina. Specification
BS 7958:1999 BS 7958:1999. Closed-circuit television (CCTV). Management and operation. Code of practice
BS 7945:1999 BS 7945:1999. Non-domestic furniture. Seating. Determination of stability
BS 489:1999 BS 489:1999. Specification for turbine lubricants
BS 6079-3:2000 BS 6079-3:2000. Project management. Guide to the management of business related project risk
WD/ISO9506-2 : 2000 EDTN 1 WD/ISO9506-2 : 2000 EDTN 1. ISO/IEC 9506-2 Industrial automation systems - Manufacturing Message Specification. Protocol specification
WD/ISO9506-1 : 2000 EDTN 1 WD/ISO9506-1 : 2000 EDTN 1. ISO9506-1 Industrial automation systems - Manufacturing Message Specification. Service definition
WD/AMD10575 (TO BS5500) WD/AMD10575 (TO BS5500). BS 5500-A6 Specification for unfired fusion welded pressure vessels. Third annual amendment
BS 4A 170:1999 BS 4A 170:1999. Specification for aluminium alloy, mushroom-headed, slotted drive, bolts (unified thread)
BS 4A 114:1999 BS 4A 114:1999. Specification for corrosion-resisting steel, mushroom-headed, slotted-drive, bolts (strength class 880/1080)
BS 7944:1999 BS 7944:1999. Type 1 heavy duty fire blankets and type 2 heavy duty heat protective blankets
ISO6238 : 2001 EDTN 2 ISO6238 : 2001 EDTN 2. ISO 6238 Adhesives - Wood-to-wood adhesive bonds - Determination of shear strength by compressive loading
ISO15968 EDTN.1 : 2000 ISO15968 EDTN.1 : 2000 . ISO 15968.2 Direct reduced iron - Determination of apparent density and water absorption of hot briquetted iron (HBI)
WD/ISO15967 : 2000 EDTN 1 WD/ISO15967 : 2000 EDTN 1. ISO 15967.2 Direct reduced iron - Determination of tumble strength of hot briquetted iron (HBI)
BS 1113:1999 BS 1113:1999. Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers)
ISO9405 : 2001 EDTN 1 ISO9405 : 2001 EDTN 1. ISO 9405 Textile floor coverings - Assessment of changes in appearance
ISO14230-4 : 2000 EDTN 1 ISO14230-4 : 2000 EDTN 1. ISO 14230-4 Road vehicles - Diagnostic systems - Keyword Protocol 2000 -. Requirements for emission related systems.
ISO/IEC2382-7 : 2000 ISO/IEC2382-7 : 2000 . ISO/IEC 2382-7 Information technology - Vocabulary. Computer programming
DD 8855-1:1999 DD 8855-1:1999. Soil analysis. Determination of polycyclic aromatic hydrocarbons (PAH)
BS ISO/IEC ISP 15122-2:1999 BS ISO/IEC ISP 15122-2:1999. Information technology. International standardized profiles AOM3nn. OSI management. AOM312. Lower layer systems and network management ensemble
DD 251:2000 DD 251:2000. Sprinkler systems for residential and domestic occupancies. Code of practice
BS ISO/IEC 13249-3:1999 BS ISO/IEC 13249-3:1999. Information technology. Database languages. SQL multimedia and application packages. Spatial
BS ISO/IEC 13249-2:2000 BS ISO/IEC 13249-2:2000. Information technology. Database languages. SQL multimedia and application packages. Full-text
BS 6767-1:1999 BS 6767-1:1999. Transportable accommodation units. Recommendations for design and construction of the basic unit
BS EN ISO 1401:2000 BS EN ISO 1401:2000. Rubber hoses for agricultural spraying
WD/ISO8937 : 2000 WD/ISO8937 : 2000 . ISO 8937 Caravan awnings - Functional requirements and test methods
ISO15893 : 2000 EDTN 1 ISO15893 : 2000 EDTN 1. ISO 15893 Space data and information transfer systems - Protocol specification for space communications - Transport protocol
ISO15892 : 2000 EDTN 1 ISO15892 : 2000 EDTN 1. ISO 15892 Space data and indformation transfer systems - Protocol specification for space communications - Security protocol
ISO15891 : 2000 EDTN 1 ISO15891 : 2000 EDTN 1. ISO 15891 Space data and information transfer systems - Protocol specification for space communications - Network protocol
WD/ISO15889 : 2000 EDTN 1 WD/ISO15889 : 2000 EDTN 1. ISO 15889 Space data and information transfer systems - Data description language - EAST specification
ISO15888 : 2000 EDTN.1 ISO15888 : 2000 EDTN.1 . ISO 15888 Space data and information transfer systems - Standard formatted data units - Referencing environment
ISO15887 : 2000 EDTN.1 ISO15887 : 2000 EDTN.1 . ISO 15887 Space data and information transfer systems - Data systems - Lossless data compression
BS ISO/IEC 9075-4:1999 BS ISO/IEC 9075-4:1999. Information technology. Database languages. SQL. Persistent stored modules (SQL/PSM)
ISO14708-1 : 2000 EDTN 1 ISO14708-1 : 2000 EDTN 1. ISO 14708-1 Implants for surgery - Active implantable medical devices. Part 1: General requirements for safety, marking and information to be provide
BS EN 50285:1999 BS EN 50285:1999. Energy efficiency of electric lamps for household use. Measurement methods
BS 6100-1.0:1999 BS 6100-1.0:1999. Glossary of building and civil engineering terms. General and miscellaneous. General
BS ISO/IEC 9075-2:1999 BS ISO/IEC 9075-2:1999. Information technology. Database languages. SQL. Foundation (SQL/foundation)
AMD10486 (TO BS8118-2) AMD10486 (TO BS8118-2). BS 8118-2-A1 Structural use of aluminium. Specification for materials, workmanship and protection
ISO6312 : 2001 EDTN 2 ISO6312 : 2001 EDTN 2. ISO 6312 Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies
WD/ISO6310 : 2001 EDTN 2 WD/ISO6310 : 2001 EDTN 2. ISO 6310 Road vehicles - Brake linings - Compressive strain test method
BS ISO/IEC 8859-15:1999 BS ISO/IEC 8859-15:1999. Information technology. 8-bit single-byte coded graphic character sets. Latin alphabet No. 9
BS ISO/IEC 15852:1999 BS ISO/IEC 15852:1999. Information technology. Programming languages. M Windowing API
BS 7953:1999 BS 7953:1999. Entrance flooring systems. Selection, installation and maintenance
BS ISO/IEC 10918-4:1999 BS ISO/IEC 10918-4:1999. Information technology. Digital compression and coding of continuous-tone still images. Registration of JPEG profiles, SPIFF profiles, SPIFF tags, SPIF
BS ISO/IEC 14753:1999 BS ISO/IEC 14753:1999. Information technology. Open distributed processing. Interface references and binding
BS ISO 14139:2000 BS ISO 14139:2000. Hydrometric determinations. Flow measurements in open channels using structures. Compound gauging structures. Compound gauging structures
BS 1722-10:1999 BS 1722-10:1999. Fences. Specification for anti-intruder fences in chain link and welded mesh
ISO3807-2 : 2000 ISO3807-2 : 2000 . ISO 3807-2 Cylinders for acetylene - Basic requirements. Cylinders with fusible plugs
ISO3807-1 : 2000 ISO3807-1 : 2000 . ISO 3807-1 Cylinders for acetylene - Basic requirements. Cylinders without fusible plugs
ISO3098-4 : 2000 ISO3098-4 : 2000 . ISO 3098-4 Technical product documentation - Lettering. Cyrillic characters
ISO3098-3 : 2000 ISO3098-3 : 2000 . ISO 3098-3 Technical product documentation - Lettering. Diacritical and particular marks for the Latin alphabet
ISO3098-2 : 2000 ISO3098-2 : 2000 . ISO 3098-2 Technical product documentation - Lettering. Greek characters
ISO8298 : 2000 ISO8298 : 2000 . ISO 8298 Determination of milligram amounts of plutonium in nitric acid solutions - Potentiometric titration with potassium dichromate after Ce(IV)oxidation and Fe(II)r
BS 6183-3:2000 BS 6183-3:2000. Protective equipment for cricketers. Leg protectors for batsmen, wicket-keepers and fielders, and thigh, arm and chest protectors for batsmen
BS 6879:1999 BS 6879:1999. Code for the representation of names of counties and similar areas
BS ISO/IEC 13210:1999 BS ISO/IEC 13210:1999. Information technology. Requirements and guidelines for test methods specifications and test method implementation for measuring conformance to POSIX stand
BS 6222-3:1999 BS 6222-3:1999. Domestic kitchen equipment. Performance requirements for durability of surface finish and adhesion of surfacing and edging materials. Specification
ISO13563-2 : 2001 EDTN 1 ISO13563-2 : 2001 EDTN 1. ISO 13563-2 Single side loading fork-lift trucks. Additional stability tests for trucks handling freight containers of 6 m length and above
ISO15031-7 : 2001 EDTN 1 ISO15031-7 : 2001 EDTN 1. ISO 15031-7 Road vehicles - Communication between vehicle and external equipment for emission related diagnostics. Data Link Security
WD/ISO15526-2 : 2000 EDTN1 WD/ISO15526-2 : 2000 EDTN1. ISO 15526-2 Plastics - Polyketone (PK) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS 3367:1999 BS 3367:1999. Specification for ropes and lines for fire service use other than for rope rescue purposes
BS 5871-2:2001 BS 5871-2:2001. Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances. Inset live fuel effect gas fires of heat inp
BS 5871-1:2001 BS 5871-1:2001. Specification for installation of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances. Gas fires, convector heaters, fire/back boil
BS 7273-1:2000 BS 7273-1:2000. Code of practice for the operation of fire protection measures. Electrical actuation of gaseous total flooding extinguishing systems
BS 8600:1999 BS 8600:1999. Complaints management systems. Guide to design and implementation
BS 7899-2:1999 BS 7899-2:1999. Code of practice for assessment of hazard to life and health from fire. Guidance on methods for the quantification of hazards to life and health and estimation of time t
BS 10175:2001 BS 10175:2001. Investigation of potentially contaminated sites. Code of practice
ISO14791 : 2000 ISO14791 : 2000 . ISO 14791 Road vehicles - Heavy commercial vehicle combinations and articulated buses - Lateral stability test procedures
ISO8717 : 2000 EDTN 2 ISO8717 : 2000 EDTN 2. ISO 8717 Commercial road vehicles - Fifth wheel couplings - Strength tests
ISO4009 : 2000 EDTN 3 ISO4009 : 2000 EDTN 3. ISO 4009 Commercial vehicles - Location of electrical and pneumatic connections between towing vehicles and trailers
ISO1726-1 : 2000 (EDTN.1) ISO1726-1 : 2000 (EDTN.1) . ISO 1726 Road vehicles-Mechanical coupling between tractors and semi-trailers. Part 1 : Interchangeability between tractors and semi-trailers for
BS 6883:1999 BS 6883:1999. Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
WD/ISO6743-15 : 2000 WD/ISO6743-15 : 2000 . ISO 6743-15 Lubricants, industrial oils and related products (class L) - Classification. Part 15: Family E (Internal combustion engine oils)
BS EN 60255-25:2000, IEC 60255-25:2000 BS EN 60255-25:2000, IEC 60255-25:2000. Electrical relays. Electromagnetic emission tests for measuring relays and protection equipment
ISO9904 : 2000 ISO9904 : 2000 . ISO 9904 Textile machinery and accessories - Steel pins for spinning preparatory and spinning machinery
ISO8636-1 : 2000 ISO8636-1 : 2000 . ISO 8636-1 Acceptance conditions for plano-milling machines - Testing of the accuracy. Portal type machines (REV)
BS EN 50263:2000 BS EN 50263:2000. Electromagnetic compatibility (EMC). Product standard for measuring relays and protection equipment
ISO9809-2 : 2000 EDTN 1 ISO9809-2 : 2000 EDTN 1. ISO 9809-2 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing. Quenched and tempered steel cylinders with tensi
ISO4343 : 2000 EDTN.2 ISO4343 : 2000 EDTN.2. Numerical control of machines - NC processor output - Post processor commands
ISO15601 : 2000 EDTN 1 ISO15601 : 2000 EDTN 1. ISO 15601 Hammers - technical specifications concerning hammer heads in steel - Test procedures
ISO/IEC14776-341 : 2000 EDTN 1 ISO/IEC14776-341 : 2000 EDTN 1. ISO/IEC 14776-341 Information technology - Small computer system interface. Controller Commands (SCSI-3 SCC)
BS EN 50144-2-18:2000 BS EN 50144-2-18:2000. Safety of hand-held electric motor operated tools. Particular requirements for laminate trimmers
BS EN 61964:1999, IEC 61964:1999 BS EN 61964:1999, IEC 61964:1999. Integrated circuits. Memory devices pin configurations
ISO14539 : 2000 (R05) EDTN 1 ISO14539 : 2000 (R05) EDTN 1. Manipulating industrial robots - Vocabulary of object handling with end effectors and of characteristics of grasp-type gripper
BS 8221-1:2000 BS 8221-1:2000. Code of practice for cleaning and surface repair of buildings. Cleaning of natural stones, brick, terracotta and concrete
BS 8221-2:2000 BS 8221-2:2000. Code of practice for cleaning and surface repair of buildings. Surface repair of natural stones, brick and terracotta
ISO9513 : 1999 ISO9513 : 1999 . ISO 9513 Metallic materials - Method for verification of extensometers used in uniaxial testing
BS 5454:2000 BS 5454:2000. Recommendations for the storage and exhibition of archival documents
WD/ISO376 : 1999 WD/ISO376 : 1999 . ISO 376 Metallic materials - Calibration of force proving instruments used for the verification of uniaxial testing machines
BS 7942:2000 BS 7942:2000. Thermostatic mixing valves for use in care establishments
BS ISO/TS 15768:2000 BS ISO/TS 15768:2000. Measurement of liquid velocity in open channels. Design, selection and use of electromagnetic current meters
BS EN 50144-2-5:2000 BS EN 50144-2-5:2000. Safety of hand-held electric motor operated tools. Particular requirements for circular saws and circular knives
BS EN 50144-2-4:2000 BS EN 50144-2-4:2000. Safety of hand-held electric motor operated tools. Particular requirements for sanders
ISO15349-2 : 1999 ISO15349-2 : 1999 . ISO 15349-2 Unalloyed steel - Determination of low carbon content. Infrared absorption method after combustion in an induction furnace (with preheating)
ISO12884 : 2000 ISO12884 : 2000 . ISO 12884 Air quality - Determination of gas- and particle-phase polycyclic aromatic hydrocarbons in ambient air - Collection on sorbent-backed filters with gas chrom
BS EN 50157-2-2:1999 BS EN 50157-2-2:1999. Domestic and similar electronic equipment interconnection requirements: AV. link. Basis system oriented commands. Basic system oriented commands
BS 6183-1:2000 BS 6183-1:2000. Protective equipment for cricketers. General requirements
WD/ISO11979-8 : 1999 WD/ISO11979-8 : 1999. ISO 11979-8 Optics and optical instruments - Intraocular lenses. Part 8: Fundamental requirements
BS EN 12352:2000 BS EN 12352:2000. Traffic control equipment. Warning and safety light devices
BS EN 12368:2000 BS EN 12368:2000. Traffic control equipment. Signal heads
ISO15579 : 2000 (R05) EDTN 1 ISO15579 : 2000 (R05) EDTN 1. ISO 15579 Metallic materials - Tensile testing at low temperature
BS EN 1837:1999 BS EN 1837:1999. Safety of machinery. Integral lighting of machines
BS 5628-2:2000 BS 5628-2:2000. Code of practice for use of masonry. Structural use of reinforced and prestressed masonry
ISO9366 : 2001 EDTN 2 ISO9366 : 2001 EDTN 2. ISO9366 : 2001 Agglomerated cork floor tiles - Determination of dimensions and control of squareness and straightness of edges
BS EN 50267-1:1999 BS EN 50267-1:1999. Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Apparatus
BS EN 50265-1:1999 BS EN 50265-1:1999. Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable. Apparatus
ISO15119 : 2000 EDTN 1 ISO15119 : 2000 EDTN 1. ISO 15119 Packaging - Sacks - Determination of the friction of filled sacks
ISO10360-5 : 2000 EDTN 1 ISO10360-5 : 2000 EDTN 1. ISO 10360-5 Geometrical product specifications (GPS) - Acceptance test and reverification test for coordinate measuring machines (CMM). Part 05: CMMs
BS 951:1999 BS 951:1999. Electrical earthing. Clamps for earthing and bonding. Specification
BS 4072:1999 BS 4072:1999. Copper/chromium/arsenic preparations for wood preservation
ISO669 : 2000 ISO669 : 2000 . ISO 669 Resistance welding equipment. Mechanical and electrical requirements
BS 4N 100-7:1999 BS 4N 100-7:1999. Aircraft oxygen systems and equipment. Guide to cleaning labelling and packaging
BS 4N 100-6:1999 BS 4N 100-6:1999. Aircraft oxygen systems and equipment. Guidance and recommendations on the selection of materials for use with oxygen
BS 4N 100-5:1999 BS 4N 100-5:1999. Aircraft oxygen systems and equipment. Guide to fire and explosion hazards associated with oxygen
BS 7533-6:1999 BS 7533-6:1999. Pavements constructed with clay, natural stone or concrete pavers. Code of practice for laying natural stone, precast concrete and clay kerb units
BS 7533-1:2001 BS 7533-1:2001. Pavements constructed with clay, natural stone or concrete pavers. Guide for the structural design of heavy duty pavements constructed of clay pavers or precast concrete
BS 2F 142:1999 BS 2F 142:1999. Hydrolysis resistant, thermoplastic polyether polyurethane elastomer coated nylon fabric for aerospace purposes
ISO/IEC14575 : 2000 EDTN 1 ISO/IEC14575 : 2000 EDTN 1. ISO/IEC 14575 Heterogeneous InterConnect (HIC) (low cost, low latency, scalable, serial interconnect for parallel system construction)
ISO5826 :1999 ISO5826 :1999 . ISO 5826 Transformers for resistance welding machines - General Specifications applicable to all transformers
BS 7956:2000 BS 7956:2000. Specification for primers for woodwork
WD/ISO14509 : 2000 EDTN 1 WD/ISO14509 : 2000 EDTN 1. ISO 14509 Small craft - Measurement of sound pressure level of the airborne sound emitted by powered recreational craft
BS 7924:1999 BS 7924:1999. Code of practice for the repair and overhaul of certified electrical apparatus intended for use in mines susceptible to firedamp
ISO13829 : 2000 ISO13829 : 2000 . ISO 13829 Water quality - Genotoxicity - Determination of genotoxicity of water and wastewater using the umu-test
BS 4G 198-3:1999 BS 4G 198-3:1999. Sleeves and moulded components for aircraft electric cables and equipment wires. Specification for heat-shrinkable sleeving for binding, insulation, and identificati
BS EN 60672-2:2000, IEC 60672-2:1999 BS EN 60672-2:2000, IEC 60672-2:1999. Ceramic and glass insulating materials. Methods of test
ISO3269 : 2000 (EDTN 3) ISO3269 : 2000 (EDTN 3) . ISO 3269 Fasteners - acceptance inspection.
BS 7951:2000 BS 7951:2000. Electricity meters. Alternating-current single-phase static watt-hour telemeters of accuracy class 1 or 2
BS 4261:1999 BS 4261:1999. Wood preservation. Vocabulary
BS 1282:1999 BS 1282:1999. Wood preservatives. Guidance on choice, use and application
BS 7941-2:2000 BS 7941-2:2000. Methods for measuring the skid resistance of pavement surfaces. Test method for measurement of surface skid resistance using the GripTester braked wheel fixed slip devic
ISO/IEC10175-3 : 2000 EDTN 1 ISO/IEC10175-3 : 2000 EDTN 1. ISO/IEC 10175-3 Information technology - Document printing application (DPA). Management abstract service definitions and procedures
BS 5266-6:1999 BS 5266-6:1999. Emergency lighting. Code of practice for non-electrical low mounted way guidance systems for emergency use. Photoluminescent systems
BS 7940:1999 BS 7940:1999. Analogue PSTN terminal support interface
BS EN 1866:1999 BS EN 1866:1999. Mobile fire extinguishers
ISO/IECTR10192-2 : 2000 EDTN1 ISO/IECTR10192-2 : 2000 EDTN1. ISO/IEC TR 10192-2 Information technology - Home electronic system (HES) interfaces. Simple Interface Type 1
BS 8220-1:2000 BS 8220-1:2000. Guide for security of buildings against crime. Dwellings
BS 8000-9:1999 BS 8000-9:1999. Workmanship on building sites. Cementitious levelling screeds and wearing screeds. Code of practice
BS 7843-3.1:1999 BS 7843-3.1:1999. Guide to the acquisition and management of meteorological precipitation data. Specification for raingauges. Storage raingauges. Storage raingauges
BS ISO/IEC 14598-5:1998 BS ISO/IEC 14598-5:1998. Information technology. Software production evaluation. Process for evaluators
BS 6463-103:1999 BS 6463-103:1999. Quicklime, hydrated lime and natural calcium carbonate. Methods for physical testing
ISO13707 : 2000 EDTN 1 ISO13707 : 2000 EDTN 1. EN ISO 13707 Petroleum and natural gas industries - Reciprocating compressors
BS 1722-11:2000 BS 1722-11:2000. Fences. Specification for prefabricated wood panel fences
BS 598-105:2000 BS 598-105:2000. Sampling and examination of bituminous mixtures for roads and other paved areas. Methods of test for the determination of texture depth
BS 4074:2000 BS 4074:2000. Specification for steel trench struts
WD/ISO11979-7 : 2001 EDTN 1 WD/ISO11979-7 : 2001 EDTN 1. ISO 11979-7 Optics and optical instruments - Intraocular lenses. Part 7: Clinical investigations
ISO10360-3 : 2000 (R05) ISO10360-3 : 2000 (R05) . ISO 10360-3.2 Geometrical product specifications (GPS) - Acceptance test and reverification test for coordinate measuring machines (CMM). Part 03: CMM
ISO975 : 2000 (R05) EDTN.3 ISO975 : 2000 (R05) EDTN.3 . ISO 975 Brown coals and lignites - Determination of yield of benzene-soluble extract - Semi-automatic method
WD/ISO12092 : 2000 WD/ISO12092 : 2000 . ISO 12092 Fittings, valves and other piping system components of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonit
DD 246:1999 DD 246:1999. Recommendations for the use of the cone calorimeter
BS 7955:1999 BS 7955:1999. Containment nets and sheets on construction works. Specification for performance and test methods
BS 6187:2000 BS 6187:2000. Code of practice for demolition
ISO11254-1 : 2000 (R05) EDTN 1 ISO11254-1 : 2000 (R05) EDTN 1. ISO 11254-1 Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces. 1 on 1 test
ISO/IEC10164-20 : 1999 ISO/IEC10164-20 : 1999. ISO/IEC10164-20 : 1999 Information technology- Open Systems Interconnection- Systems Mangement: Time management function
ISO11236 : 2000 ISO11236 : 2000 . ISO 11236 Rubber compounding ingredients - p-Phenylenediamine antidegradants - Test methods
BS 500:2000 BS 500:2000. Steel sleepers
ISO12945-1 : 2000 (R05) EDTN 1 ISO12945-1 : 2000 (R05) EDTN 1. ISO 12945-1 Textiles - Determination of the resistance to pilling and change of appearance of fabrics. Pilling box method
ISO3592 EDTN.2 : 2000 ISO3592 EDTN.2 : 2000 . Numerical control of machines - NC processor output - File structure and language format
BS S 206:1999 BS S 206:1999. Chromium-nickel-aluminium corrosion resisting steel (precipitation hardening) rod, cold drawn wire and springs
WD/ISO10549 : 2000 EDTN 1 WD/ISO10549 : 2000 EDTN 1. ISO 10549 Micrographics - A6-size aperture cards
BS 5482-3:1999 BS 5482-3:1999. Domestic butane- and propane-gas-burning installations. Installations in boats, yachts and other vessels
BS EN 60455-2:1999, IEC 60455-2:1998 BS EN 60455-2:1999, IEC 60455-2:1998. Resin based reactive compounds used for electrical insulation. Methods of test
BS EN ISO 283-1:2000 BS EN ISO 283-1:2000. Textile conveyor belts. Full thickness tensile testing. Determination of tensile strength, elongation at break and elongation at the reference load
BS ISO 8138:1998 BS ISO 8138:1998. Hydraulic fluid power. Single rod cylinders, 16 MPA (160 bar) compact series. Port dimensions
BS ISO 639-2:1998 BS ISO 639-2:1998. Codes for the representation of the names of languages. Alpha-3 code
DD ENV 1998-4:1999 DD ENV 1998-4:1999. Eurocode 8: Design provisions for earthquake resistance of structures. Silos, tanks and pipelines
BS ISO 113:1999 BS ISO 113:1999. Rolling bearings. Plummer block housings. Boundary dimensions
BS ISO 13215-3:1999 BS ISO 13215-3:1999. Road vehicles. Reduction of misuse risk of child restraint systems. Prediction and assessment of misuse by misuse mode and effect analysis (MMEA)
PAS 27:1999 PAS 27:1999. Unplasticized poly(vinyl chloride) alloy (PVC-A) pipes and bends for water under pressure
HB 10158:1999 HB 10158:1999. The Continuous Improvement Toolkit. A practical resource for achieving organizational excellence
BS EN 1766:2000 BS EN 1766:2000. Products and systems for the protection and repair of concrete structures. Test methods. Reference concretes for testing
KIT 20:1999 KIT 20:1999. Information security standards kit
DISC PD 1999-2:1998 DISC PD 1999-2:1998. You and the Euro
DISC PD 1999-3:1999 DISC PD 1999-3:1999. The impact of the euro on spreadsheets
BS EN 1097-4:1999 BS EN 1097-4:1999. Tests for mechanical and physical properties of aggregates. Determination of the voids of dry compacted filler
BS ISO 8051:1999 BS ISO 8051:1999. Long shank taps with nominal diameters from M3 to M10. Full-diameter shank taps with recess
BS EN ISO 13407:1999 BS EN ISO 13407:1999. Human-centred design processes for interactive systems
BSISO10303-45 : 1998 BSISO10303-45 : 1998 .
BSISO10303-45 : 1998 (DISK) BSISO10303-45 : 1998 (DISK).
BS EN 12419:1999 BS EN 12419:1999. Respiratory protective devices. Light duty construction compressed airline breathing apparatus incorporating a full face mask, half mask or quarter mask. Requirement
BS EN 1835:2000 BS EN 1835:2000. Respiratory protective devices. Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood. Requirements, testing, marking
BS ISO 13999-1:1999 BS ISO 13999-1:1999. Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knives. Chain-mail gloves and arm guards
BS EN ISO 10993-5:1999 BS EN ISO 10993-5:1999. Biological evaluation of medical devices. Tests for in vitro cytotoxicity
BS 6221-21:2001 BS 6221-21:2001. Printed wiring boards. Guide to the rework of unassembled boards
BS ISO 15566:1998 BS ISO 15566:1998. Practice for use of the alanine-EPR dosimetry system
CWA 13449-8:1998 CWA 13449-8:1998. Extensions for financial services (XFS) interface specification. Depository device class interface. Programmer's reference
CWA 13449-11:1998 CWA 13449-11:1998. Extensions for financial services (XFS) interface specification. Vendor dependent mode device class interface. Programmer's reference
CWA 13449-7:1998 CWA 13449-7:1998. Extensions for financial services (XFS) interface specification. Check reader/scanner device class interface. Programmer's reference
CWA 13449-4:1998 CWA 13449-4:1998. Extensions for financial services (XFS) interface specification. Identification card device class interface. Programmer's reference
CWA 13449-6:1998 CWA 13449-6:1998. Extensions for financial services (XFS) interface specification. PIN keypad device class interface. Programmer's interface
CWA 13449-9:1998 CWA 13449-9:1998. Extensions for financial services (XFS) interface specification. Text terminal unit device class interface. Programmer's reference
CWA 13449-10:1998 CWA 13449-10:1998. Extensions for financial services (XFS) interface specification. Sensors and indicators unit device class interface. Programmer's reference
CWA 13449-3:1998 CWA 13449-3:1998. Extensions for financial services (XFS) interface specification. Printer device class interface. Programmer's reference
CWA 13449-5:1998 CWA 13449-5:1998. Extensions for financial services (XFS) interface specification. Cash dispenser device class interface. Programmer's reference
CWA 13449-1:1998 CWA 13449-1:1998. Extensions for financial services (XFS) interface specification. Application programming interface (API). Service provider interface (SPI). Programmer's reference
CWA 13449-12:1998 CWA 13449-12:1998. Extensions for financial services (XFS) interface specification. Camera device class interface. Programmer's reference
CWA 13449-2:1998 CWA 13449-2:1998. Extensions for financial services (XFS) interface specification. Service classes definition
BS AU 50-1.1.4b:1996, ISO 10191:1995 BS AU 50-1.1.4b:1996, ISO 10191:1995. Tyres and wheels. Tyres. Car tyres. Method of test for verifying tyre capabilities
BS 7932:1998 BS 7932:1998. Method for determination of polished paver value (PPV)
KIT 18 KIT 18. Safe working at heights pack
KIT 12 KIT 12. Industrial safety pack
KIT 16 KIT 16. Eye protection pack
KIT 17 KIT 17. Non destructive testing (radiography) pack
BS EN 1330-4:2000 BS EN 1330-4:2000. Non-destructive testing. Terminology. Terms used in ultrasonic testing
HB 10159:1999 HB 10159:1999. Pre-contract Practice for the Building Team. 8th edition
HB 10160:1999 HB 10160:1999. Contract Administration for the Building Team. 8th edition
HB 10161:1999 HB 10161:1999. Tenders and Contracts for Building. 3rd edition
PD CR 13576:1999, CR 13576:1999 PD CR 13576:1999, CR 13576:1999. Implementation of EN 729 on quality requirements for fusion welding of metallic materials
BS EN ISO 9888:1999, BS 6068-5.13:1999 BS EN ISO 9888:1999, BS 6068-5.13:1999. Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium. Static test (Zahn-
BS ISO/IEC 13238-3:1998 BS ISO/IEC 13238-3:1998. Information technology. Data management. IRDS export/import facility
BS ISO 10817-1:1999 BS ISO 10817-1:1999. Rotating shaft vibration measuring systems. Relative and absolute sensing of radial vibration
BS ISO 10303-22:1998 BS ISO 10303-22:1998. Industrial automation systems and integration. Product data representation and exchange. Implementation methods. Standard data access interface
BS EN ISO 11130:1999 BS EN ISO 11130:1999. Corrosion of metals and alloys. Alternate immersion test in salt solution
BS EN 10222-2:2000 BS EN 10222-2:2000. Steel forgings for pressure purposes. Ferritic and martensitic steels with specified elevated temperature properties
BS EN 10222-5:2000 BS EN 10222-5:2000. Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels
BS EN 10230-1:2000 BS EN 10230-1:2000. Steel wire nails. Loose nails for general applications
BS 7860:1996 BS 7860:1996. Specification for carbon monoxide detectors (electrical) for domestic use
BS 7698-12:1998, ISO 8528-12:1997 BS 7698-12:1998, ISO 8528-12:1997. Reciprocating internal combustion engine driven alternating current generating sets. Emergency power supply to safety devices
BS 7563:1999 BS 7563:1999. Specification for non-prescriptive graduated support hosiery
BS EN 50131-6:1998 BS EN 50131-6:1998. Alarm systems. Intrusion systems. Power supplies
BS EN ISO 11102-1:1997 BS EN ISO 11102-1:1997. Reciprocating internal combustion engines. Handle starting equipment. Safety requirements and tests
BS EN ISO 11102-2:1997 BS EN ISO 11102-2:1997. Reciprocating internal combustion engines. Handle starting equipment. Method of testing the angle of disengagement
BS ISO 6336-1:1996 BS ISO 6336-1:1996. Calculation of load capacity of spur and helical gears. Basic principles, introduction and general influence factors
BS ISO 6336-2:1996 BS ISO 6336-2:1996. Calculation of load capacity of spur and helical gears. Calculation of surface durability (pitting)
BS EN 12422:1999 BS EN 12422:1999. Sisal twines
BS EN 12423:1999 BS EN 12423:1999. Polypropylene twines
BS 5306-8:2000 BS 5306-8:2000. Fire extinguishing installations and equipment on premises. Selection and installation of portable fire extinguishers. Code of practice
BS 5306-3:2000 BS 5306-3:2000. Fire extinguishing installations and equipment on premises. Maintenance of portable fire extinguishers. Code of practice
DISC PD 0008:1999 DISC PD 0008:1999. Code of practice for legal admissibility and evidential weight of information stored electronically
KIT 38 KIT 38. Legal admissibility guidance kit
BS EN 381-4:1999 BS EN 381-4:1999. Protective clothing for users of hand-held chain saws. Test methods for chainsaw protective gloves
BS EN 381-7:1999 BS EN 381-7:1999. Protective clothing for users of hand-held chain saws. Requirements for chainsaw protective gloves
BS EN 1330-9:2000 BS EN 1330-9:2000. Non-destructive testing. Terminology. Terms used in acoustic emission testing
BS EN 12543-1:1999 BS EN 12543-1:1999. Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Scanning method
BS EN 12543-2:1999 BS EN 12543-2:1999. Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Pinhole camera radiographic method
BS EN 12543-3:1999 BS EN 12543-3:1999. Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Slit camera radiographic method
BS EN 12543-4:1999 BS EN 12543-4:1999. Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Edge method
BS EN 12543-5:1999 BS EN 12543-5:1999. Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Measurement of the effective focal spot s
BS EN 12544-1:1999 BS EN 12544-1:1999. Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Voltage divider method
BS EN 12544-3:1999 BS EN 12544-3:1999. Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Spectrometric method
BSISO2094 : 1999 (R05) BSISO2094 : 1999 (R05).
PD ISO/TS 16949:1999, ISO/TS 16949:1999 PD ISO/TS 16949:1999, ISO/TS 16949:1999. Quality systems. Automotive suppliers. Particular requirements for the application of ISO 9001:1994
BS EN 61169-31:2000, IEC 61169-31:1999,QC 223100:1999 BS EN 61169-31:2000, IEC 61169-31:1999,QC 223100:1999. Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 1,
BS EN 12409:1999 BS EN 12409:1999. Rubber and plastics machines. Thermoforming machines. Safety requirements
BS EN 12414:1999 BS EN 12414:1999. Vehicle parking control equipment. Pay and display ticket machine. Technical and functional requirements
PAS 32-2:1999 PAS 32-2:1999. Specification for examination and test of new lifts before putting into service. Hydraulic lifts
BS EN 1853:1999 BS EN 1853:1999. Agricultural machinery. Trailers with tipping body. Safety
BS EN 707:1999 BS EN 707:1999. Agricultural machinery. Slurry tankers. Safety
BS 7755-4.2.4:1999, ISO 11267:1999 BS 7755-4.2.4:1999, ISO 11267:1999. Soil quality. Biological methods. Effects of pollutants on soil fauna. Inhibition of reproduction of Collembola (Folsomia candida
BS EN ISO 11737-2:2000 BS EN ISO 11737-2:2000. Sterilization of medical devices. Microbiological methods. Tests of sterility performed in the validation of a sterilization process
NC/BSEN12868 : 1999 NC/BSEN12868 : 1999.
BS ISO 12151-3:1999 BS ISO 12151-3:1999. Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 6162 flange ends
BS ISO 78-2:1999 BS ISO 78-2:1999. Chemistry. Layout for standards. Methods of chemical analysis
BS ISO 4161:1999 BS ISO 4161:1999. Hexagon nuts with flange. Coarse thread
BS EN 12586:1999 BS EN 12586:1999. Child care articles. Soother holder. Safety requirements and test methods
BS EN 175101-802:2000 BS EN 175101-802:2000. Harmonized system of quality assessment for electronic components. Detail specification. Two-part connectors for printed boards for high number of contacts
BS EN 175101-809:2000 BS EN 175101-809:2000. Harmonized system of quality assessment for electronic components. Detail specification. Detail Specification: Two-part connectors for printed boards havin
BS EN 175201-804:2000 BS EN 175201-804:2000. Harmonized system of quality assessment for electronic components. Detail specification. Circular connectors. Round contacts, size diameter 1,6 mm, threade
BS EN 175301-803:2000 BS EN 175301-803:2000. Harmonized system of quality assessment for electronic components. Detail specification. Rectangular connectors. Flat contacts, 0,8 mm thickness, locking s
BS EN 175301-801:2000 BS EN 175301-801:2000. Harmonized system of quality assessment for electronic components. Detail specification. High density rectangular connectors, round removable crimp contact
BS EN 10250-1:1999 BS EN 10250-1:1999. Open steel die forgings for general engineering purposes. General requirements
WD/ELECTRONIC BOOK - QMS V2.0 (CD ROM) WD/ELECTRONIC BOOK - QMS V2.0 (CD ROM).
wd/ELECTRONIC BK - ISM V1.0 (BS7799 CDRO wd/ELECTRONIC BK - ISM V1.0 (BS7799 CDRO.
BS EN 12679:2000 BS EN 12679:2000. Non-destructive testing. Determination of the size of industrial radiographic sources. Radiographic method
BS EN ISO 4491-2:1999 BS EN ISO 4491-2:1999. Metallic powders. Determination of oxygen content by reduction methods. Loss of mass on hydrogen reduction (hydrogen loss)
BS IEC 61010-3-010:1999 BS IEC 61010-3-010:1999. Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-010, particul
BSIEC61010-3-020 : 1999 BSIEC61010-3-020 : 1999. British Standard BS IEC 61010-3-020 Safety measurements for electrical equipment for measurement, control, and laboratory use. Part 3-020 Conformity ve
BS IEC 61010-3-051:1999 BS IEC 61010-3-051:1999. Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-051, particul
BS IEC 61010-3-061:1999 BS IEC 61010-3-061:1999. Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-061, particul
BS ISO 11859:1999 BS ISO 11859:1999. Textile floor coverings. Pure wool, hand-knotted pile carpets. Specification
BS ISO 11861:1999 BS ISO 11861:1999. Textile floor coverings. Coir mats. Types and specification
BS ISO 11157:1999 BS ISO 11157:1999. Road vehicles. Brake lining assemblies. Inertia dynamometer test method
BS EN ISO 305:1999 BS EN ISO 305:1999. Plastics. Determination of thermal stability of poly (vinyl chloride) related chlorine-containing homopolymers and copolymers and their compounds. Discoloration
BS ISO 7113:1999 BS ISO 7113:1999. Portable hand-held forestry machines. Cutting attachments for brush cutters. Single piece metal blades
BS EN ISO 3915:1999 BS EN ISO 3915:1999. Plastics. Measurement of resistivity of conductive plastics
BS EN 12413:1999 BS EN 12413:1999. Safety requirements for bonded abrasive products
BS EN ISO 4577:1999 BS EN ISO 4577:1999. Plastics. Polypropylene and propylene-copolymers. Determination of thermal oxidative stability in air. Oven method
BS ISO 14164:1999 BS ISO 14164:1999. Stationary source emissions. Determination of the volume flowrate of gas streams in ducts. Automated method
BS EN ISO 4615:1999 BS EN ISO 4615:1999. Plastics. Unsaturated polyesters and epoxide resins. Determination of total chlorine content
BS EN 12653:2000 BS EN 12653:2000. Footwear, leather and imitation leather manufacturing machines. Nailing machines. Safety requirements
BS EN 61811-1:1999 BS EN 61811-1:1999. Electromechanical non-specified time all-or-nothing relays of assessed quality. Generic specification
BS EN 12628:1999 BS EN 12628:1999. Diving accessories. Combined buoyancy and rescue devices. Functional and safety requirements, test methods
BS EN ISO 642:1999 BS EN ISO 642:1999. Steel hardenability test by end quenching (Jominy test)
BS EN ISO 4613-1:1999 BS EN ISO 4613-1:1999. Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials. Designation and specification
BS EN 50320:2001 BS EN 50320:2001. Digital audio broadcasting system. Specification of the DAB command set for receivers (DCSR)
BS ISO 9667:1998 BS ISO 9667:1998. Aircraft ground support equipment. Tow bars
BS EN ISO 11116-1:1999 BS EN ISO 11116-1:1999. Gas cylinders. 17E taper thread for connection of valves to gas cylinders. Specifications
BS ISO 10663:1999 BS ISO 10663:1999. Hexagon nuts with flange. Fine pitch thread
BS ISO 1817:1999, BS 903-A16:1999 BS ISO 1817:1999, BS 903-A16:1999. Rubber, vulcanized. Determination of the effect of liquids
BS ISO 5433:1999 BS ISO 5433:1999. Leather. Bovine wet blue. Specification
BS ISO 8573-3:1999 BS ISO 8573-3:1999. Compressed air. Test methods for measurement of humidity
BS EN 609-2:2000 BS EN 609-2:2000. Agricultural and forestry machinery. Safety of log splitters. Screw splitters
BS EN 61800-3:1997 BS EN 61800-3:1997. Adjustable speed electrical power drive systems. EMC product standard including specific test methods
BS 5266-1:1999 BS 5266-1:1999. Emergency lighting. Code of practice for the emergency lighting of premises other than cinemas and certain other specified premises used for entertainment
BS 6043-3.1.1:1999, ISO 8007-1:1999 BS 6043-3.1.1:1999, ISO 8007-1:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of cathod
BS 6043-3.1.2:1999, ISO 8007-2:1999 BS 6043-3.1.2:1999, ISO 8007-2:1999. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of anodes
BS EN 12738:1999 BS EN 12738:1999. Biotechnology. Laboratories for research, development and analysis. Guidance for containment of animals inoculated with microorganisms in experiments
BS EN 12740:1999 BS EN 12740:1999. Biotechnology. Laboratories for research, development and analysis. Guidance for handling, inactivating and testing of waste
BS EN 12741:1999 BS EN 12741:1999. Biotechnology. Laboratories for research, development and analysis. Guidance for biotechnology laboratory operations
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
