BIS Standards Catalogue
BS EN 12588:1999 BS EN 12588:1999. Lead and lead alloys. Rolled lead sheet for building purposes
BS EN 10095:1999 BS EN 10095:1999. Heat resisting steels and nickel alloys
BS EN 1367-1:2000 BS EN 1367-1:2000. Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing
BS EN 932-6:1999 BS EN 932-6:1999. Tests for general properties of aggregates. Definitions of repeatability and reproducibility
BS EN 932-5:2000 BS EN 932-5:2000. Tests for general properties of aggregates. Common equipment and calibration
PD 6640:1999 PD 6640:1999. Recommendations for short term solutions to support a sevice provider access interface
BS EN ISO 8785:1999 BS EN ISO 8785:1999. Geometrical product specification (GPS). Surface imperfections. Terms, definitions and parameters
BS EN 61249-2-13:1999, IEC 61249-2-13:1999 BS EN 61249-2-13:1999, IEC 61249-2-13:1999. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unc
BS EN 1034-3:2000 BS EN 1034-3:2000. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Winders and slitters, plying machines
BS EN 1034-1:2000 BS EN 1034-1:2000. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Common requirements
BS EN 10160:1999 BS EN 10160:1999. Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
BS EN 61162-1:2001 BS EN 61162-1:2001. Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Single talker and multiple listeners
BS EN 12584:1999 BS EN 12584:1999. Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts. Terminology
BS EN 288-9:1999 BS EN 288-9:1999. Specification and approval of welding procedures for metallic materials. Welding procedure test for pipeline welding on land and offshore site butt welding of transm
BS EN 61189-2:1997, IEC 61189-2:1997 BS EN 61189-2:1997, IEC 61189-2:1997. Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Test methods for m
BS EN 12885:1999 BS EN 12885:1999. Biotechnology. Performance criteria for cell disrupters
BS EN 12884:1999 BS EN 12884:1999. Biotechnology. Performance criteria for centrifuges
BS EN 12690:1999 BS EN 12690:1999. Biotechnology. Performance criteria for shaft seals
BS EN 12582:1999 BS EN 12582:1999. Surface active agents. Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
BS EN 12458:1999 BS EN 12458:1999. Surface active agents. Determination of stability in hard water
BS EN 12139:1999 BS EN 12139:1999. Surface active agents. Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC
BS EN 1890:1999 BS EN 1890:1999. Surface active agents. Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
BS EN 12157:1999 BS EN 12157:1999. Rotodynamic pumps. Coolant pump units for machine tools. Nominal flow rate, dimensions
00/713078DC 00/713078DC. Draft British Standard BS ISO 5555 Animal and vegetable fats and oils - Sampling
BS EN 635-5:1999 BS EN 635-5:1999. Plywood. Classification by surface appearance. Methods for measuring and expressing characteristics and defects
BS EN 61000-2-10:1999, IEC 61000-2-10:1998 BS EN 61000-2-10:1999, IEC 61000-2-10:1998. Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Conducted disturbance
BS EN 12109:1999 BS EN 12109:1999. Vacuum drainage systems inside buildings
BS EN 1542:1999 BS EN 1542:1999. Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pull-off
BS 5045-8:2000 BS 5045-8:2000. Transportable gas containers. Specification for seamless aluminium alloy gas containers of water capacity 0.5 L up to 15 L and up to 300 bar charged pressure at 15°C for
BS 5045-7:2000 BS 5045-7:2000. Transportable gas containers. Specification for seamless steel gas containers of water capacity 0.5 L up to 15 L for special portable applications
BS EN 720-1:1999 BS EN 720-1:1999. Transportable gas cylinders. Gases and gas mixtures. Properties of pure gases
BS EN 61943:1999, IEC 61943:1999,QC 211001:1999 BS EN 61943:1999, IEC 61943:1999,QC 211001:1999. Integrated circuits. Manufacturing line approval application guideline
BS 7804-2:1999, ISO 9884-2:1999 BS 7804-2:1999, ISO 9884-2:1999. Tea sacks. Performance specification for sacks for palletized and containerized transport of tea
BS EN ISO 4618-3:2000 BS EN ISO 4618-3:2000. Paints and varnishes. Terms and definitions for coating materials. Surface preparation and methods of application
BS EN ISO 4618-2:2000 BS EN ISO 4618-2:2000. Paints and varnishes. Terms and definitions for coating materials. Special terms relating to paint characteristics and properties
BS EN 1808:1999 BS EN 1808:1999. Safety requirements on suspended access equipment. Design calculations, stability criteria, construction. Tests
BS EN ISO 13230:1999 BS EN ISO 13230:1999. Ophthalmic optics. Bar code specifications
BS EN 12316-2:2000 BS EN 12316-2:2000. Flexible sheets for waterproofing. Determination of peel resistance of joints. Plastic and rubber sheets for roof waterproofing
BS EN 12317-2:2000 BS EN 12317-2:2000. Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing
BS EN ISO 11334-4:1999 BS EN ISO 11334-4:1999. Walking aids manipulated by one arm. Requirements and test methods. Walking sticks with three or more legs
BS EN 60843-4:2001, IEC 60843-4:2000 BS EN 60843-4:2001, IEC 60843-4:2000. Helical-scan video tape cassette system using 8 mm magnetic tape. 8 mm video. Video subcode (VSC)
ISO11602-2 : 2000 EDTN 1 ISO11602-2 : 2000 EDTN 1. ISO 11602-2 Fire protection equipment - Portable and Wheeled extinguishers - Inspection and Maintenance
ISO11602-1 : 2000 EDTN 1 ISO11602-1 : 2000 EDTN 1. ISO 11602-1 Fire protection equipment - Portable and Wheeled extinguishers - Inspection and Maintenance
BS EN 1863-1:2000 BS EN 1863-1:2000. Glass in buildings. Heat strengthened soda lime silicate glass. Definition and description
BS EN 356:2000 BS EN 356:2000. Glass in building. Security glazing. Testing and classification of resistance against manual attack
BS EN 1036:1999 BS EN 1036:1999. Glass in building. Mirrors from silver-coated float glass for internal use
BS ISO/IEC 15408-3:1999 BS ISO/IEC 15408-3:1999. Information technology. Security techniques. Evaluation criteria for IT security. Security assurance requirements
BS ISO/IEC 15408-2:1999 BS ISO/IEC 15408-2:1999. Information technology. Security techniques. Evaluation criteria for IT security. Security functional requirements
BS ISO/IEC 15408-1:1999 BS ISO/IEC 15408-1:1999. Information technology. Security techniques. Evaluation criteria for IT security. Introduction and general model
PD 7777:2000 PD 7777:2000. Alternative steel selection and its effect on design and testing of tanks to BS 7777
DC99/242132 DC99/242132. Draft British Standard BS EN 60086-1-A1F2 Primary batteries. General
BS ISO 15621:1999 BS ISO 15621:1999. Urine-absorbing aids. General guidance on evaluation
BS EN 933-8:1999 BS EN 933-8:1999. Tests for geometrical properties of aggregates. Assessment of fines. Sand equivalent test
BS ISO 8058:1999 BS ISO 8058:1999. Air cargo. Insulated containers. Thermal efficiency requirements
BS 5766-5:1999, ISO 6495:1999 BS 5766-5:1999, ISO 6495:1999. Methods for analysis of animal feeding stuffs. Determination of water-soluble chlorides content
BS EN 12742:1999 BS EN 12742:1999. Fruit and vegetable juices. Determination of free amino acids content. Liquid chromatographic method
DC99/562766 DC99/562766. Draft British Standard BS EN 271-A1 Specification for respiratory protective equipment - Compressed air line breathing apparatus for use in abrasive blasting operations
DC99/562765 DC99/562765. Draft British Standard, BS EN 270-A1, Specification for respiratory protective equipment;compressed air line, breathing apparatus incorporating a hood
BS EN 60068-2-39:1999, IEC 60068-2-39:1999 BS EN 60068-2-39:1999, IEC 60068-2-39:1999. Environmental testing. Test methods. Tests. Test Z/AMD. Combined sequential cold, low air pressure and damp heat
BS EN 60068-2-38:1999, IEC 60068-2-38:1974 BS EN 60068-2-38:1999, IEC 60068-2-38:1974. Environmental testing. Test methods. Tests. Test Z/AD:composite temperature/humidity cyclic test
BS EN 60068-2-30:1999, IEC 60068-2-30:1980 BS EN 60068-2-30:1999, IEC 60068-2-30:1980. Environmental testing. Test methods. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)
BS EN 60068-2-13:1999, IEC 60068-2-13:1983 BS EN 60068-2-13:1999, IEC 60068-2-13:1983. Environmental testing. Test methods. Tests. Test M. Low air pressure
BS EN 60068-3-2:1999, IEC 60068-3-2:1976 BS EN 60068-3-2:1999, IEC 60068-3-2:1976. Environmental testing. Guidance. Combined temperature/low air pressure tests. Combined temperature/low air pressure t
BS EN 60068-3-1:1999, IEC 60068-3-1:1974,IEC 60068-3-1A:1978 BS EN 60068-3-1:1999, IEC 60068-3-1:1974,IEC 60068-3-1A:1978. Environmental testing. Guidance. Cold and dry heat tests. Cold and dry heat t
BS EN 60068-2-11:1999, IEC 60068-2-11:1981 BS EN 60068-2-11:1999, IEC 60068-2-11:1981. Environmental testing. Test methods. Tests. Test KA. Salt mist
BS 5776:1996 BS 5776:1996. Specification for powered stairlifts
DC99/710552 DC99/710552. Draft British Standard, BS 5776 A1, Specification for powered stairlifts
BS EN 12325-1:1999 BS EN 12325-1:1999. Irrigation techniques. Centre pivot and moving lateral systems. Presentation of the technical characteristics
BS EN 60707:1999, IEC 60707:1999 BS EN 60707:1999, IEC 60707:1999. Flammability of solid non-metallic materials when exposed to flame sources. List of test methods
BS EN 30-2-2:1999 BS EN 30-2-2:1999. Domestic cooking appliances burning gas. Rational use of energy. Appliances having forced-convection ovens and/or grills. Section 2. Forced convection ovens/grills
BS EN 30-1-2:1999 BS EN 30-1-2:1999. Domestic cooking appliances burning gas. Safety. Appliances having forced-convection ovens and/or grills
BS EN 60107-5:1999, IEC 60107-5:1992 BS EN 60107-5:1999, IEC 60107-5:1992. Methods of measurement on receivers for television broadcast transmission. Electrical measurements on multichannel sound tele
BS 143 and 1256:2000 BS 143 and 1256:2000. Threaded pipe fittings in malleable cast iron and cast copper alloy
BS EN 12324-1:1999 BS EN 12324-1:1999. Irrigation techniques. Reel machine systems. Size series
BS EN ISO 6887-1:1999 BS EN ISO 6887-1:1999. Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Gene
BS EN 12386:1999 BS EN 12386:1999. Chemicals used for treatment of water intended for human consumption. Copper sulfate
WD/ISO14704 : 2000 EDTN 1 WD/ISO14704 : 2000 EDTN 1. ISO 14704 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room tempera
BS EN ISO 898-1:1999 BS EN ISO 898-1:1999. Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs
BS EN ISO 8385:1999 BS EN ISO 8385:1999. Ships and marine technology. Dredgers. Classification
BS ISO/IEC 13249-1:2000 BS ISO/IEC 13249-1:2000. Information technology. Database languages. SQL multimedia and application packages. Framework
BS 5766-17:1999, ISO 14797:1999 BS 5766-17:1999, ISO 14797:1999. Methods for analysis of animal feeding stuffs. Determination of furazolidone content. Method using high-performance liquid chromatograp
BS EN ISO 90-2:1999 BS EN ISO 90-2:1999. Light gauge metal containers. Definitions and determination of dimensions and capacities. General use containers
BS EN ISO 90-1:1999 BS EN ISO 90-1:1999. Light gauge metal containers. Definitions and determination of dimensions and capacities. Open-top cans
BS EN ISO 2233:1999 BS EN ISO 2233:1999. Packaging. Complete, filled transport packages. Conditioning for testing
BS 600:2000 BS 600:2000. A guide to the application of statistical methods to quality and standardization
DC99/563886 DC99/563886. Draft British Standard BS EN ISO 9241-1-A1 Ergonomic requirements for office work with visual display terminals (VDTs). Part 1: Introduction
BS EN 12050-3:2001 BS EN 12050-3:2001. Wastewater lifting plants for buildings and sites. Principles of construction and testing. Lifting plants for wastewater containing faecal matter for limited app
BS EN 12050-1:2001 BS EN 12050-1:2001. Wastewater lifting plants for buildings and sites. Principles of construction and testing. Lifting plants for wastewater containing faecal matter
BS 4190:2001 BS 4190:2001. ISO metric black hexagon bolts, screws and nuts. Specification
BS EN 50295:1999 BS EN 50295:1999. Low-voltage switchgear and controlgear. Controller and device interface systems. Actuator sensor interface (AS-i)
BS ISO 10526:1999 BS ISO 10526:1999. CIE standard illuminants for colorimetry
BS EN 61076-4-104:1999, IEC 61076-4-104:1999 BS EN 61076-4-104:1999, IEC 61076-4-104:1999. Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for
ISO10333-2 : 2000 ISO10333-2 : 2000 . ISO 10333-6 Personal fall-arrest systems. Part 6: Systems performance tests
BS EN 60446:2000, IEC 60446:1999 BS EN 60446:2000, IEC 60446:1999. Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours or numeral
DD ENV ISO 11079:1999 DD ENV ISO 11079:1999. Evaluation of cold environments. Determination of required clothing insulation (IREQ)
BS EN ISO 8536-1:1999 BS EN ISO 8536-1:1999. Infusion equipment for medical use. Infusion glass bottles
DC00/561891 DC00/561891. SOIL QUALITY-CHARCECTIZATUIN OF EXCAVATED SOIL
ISO11406 : 2001 EDTN 2 ISO11406 : 2001 EDTN 2. ISO11406 : 2001 Commercial road vehicles-Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers-Interchangeability
BS EN 50186-2:1999 BS EN 50186-2:1999. Live-line washing systems for power installations with nominal voltages above 1 kV. National annexes
BS EN 50186-1:1999 BS EN 50186-1:1999. Live-line washing systems for power installations with nominal voltages above 1 kV. Commonrequirements
BS EN 1926:1999 BS EN 1926:1999. Natural stone test methods. Determination of compressive strength
BS EN 12370:1999 BS EN 12370:1999. Natural stone test methods. Determination of resistance to salt crystallization
BS EN 1925:1999 BS EN 1925:1999. Natural stone test methods. Determination of water absorption coefficient by capillarity
BS EN 1936:1999 BS EN 1936:1999. Natural stone test methods. Determination of real density and apparent density and of total and open porosity
BS EN 60695-9-1:1999, IEC 60695-9-1:1998 BS EN 60695-9-1:1999, IEC 60695-9-1:1998. Fire hazard testing. Surface spread of flame. General guidance. General guidance
ISO16590 : 2000 EDTN.1 ISO16590 : 2000 EDTN.1. ISO 16590 Water quality - Determination of mercury - Enrichment methods by amalgamation
BS EN 12295:2000, BS 2782-11:Method 1123P:2000 BS EN 12295:2000, BS 2782-11:Method 1123P:2000. Plastics piping systems. Thermoplastics pipes and associated fittings for hot and cold water. Test method
BS EN 12294:2000, BS 2782-11:Method 1123V:2000 BS EN 12294:2000, BS 2782-11:Method 1123V:2000. Plastic piping systems. Systems for hot and cold water. Test method for leaktightness under vacuum
BS EN 12293:2000, BS 2782-11: Method 1123T:2000 BS EN 12293:2000, BS 2782-11: Method 1123T:2000. Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the
BS IEC 60825-8:1999 BS IEC 60825-8:1999. Safety of laser products. Guidelines for the safe use of medical laser equipment
BS EN ISO 11058:1999 BS EN ISO 11058:1999. Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, without load
DC99/715605 DC99/715605. Draft British Standard BS EN 71-3-A1 Safety of toys. Migration of certain elements
BS IEC 60747-14-1:2000 BS IEC 60747-14-1:2000. Discrete semiconductor devices and integrated circuits. Semiconductor devices. Semiconductor sensors. General and classification. Sensor generals and cla
BS EN 1032:1997 BS EN 1032:1997. Mechanical vibration. Testing of mobile machinery in order to determine the whole-body vibration emission value. General
BS EN 60068-2-58:1999, IEC 60068-2-58:1999 BS EN 60068-2-58:1999, IEC 60068-2-58:1999. Environmental testing. Test methods. Test Td. Test methods for solderability, resistance to dissolution of metall
BS EN 1253-1:1999 BS EN 1253-1:1999. Gullies for buildings. Requirements
BS EN ISO 4759-3:2000 BS EN ISO 4759-3:2000. Tolerances for fasteners. Plain washers for bolts, screws and nuts. Product grades A and C
BS EN 1946-2:1999 BS EN 1946-2:1999. Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Measurements by g
BS EN 1946-1:1999 BS EN 1946-1:1999. Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Common criteria
BS EN 1946-3:1999 BS EN 1946-3:1999. Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Measurements by h
BS EN 61036:1997, IEC 61036:1996 BS EN 61036:1997, IEC 61036:1996. Alternating current static watt-hour meters for active energy (classes 1 and 2)
BS EN ISO 12228:1999, BS 684-2.38:1999 BS EN ISO 12228:1999, BS 684-2.38:1999. Animal and vegetable fats and oils. Determination of individual and total sterols contents. Gas chromatographic method
DD 243:1999 DD 243:1999. Code of practice for intruder alarm systems signalling to alarm receiving centres
BS Z 100:1999, ISO 14625:1999 BS Z 100:1999, ISO 14625:1999. Space systems. Ground support equipment for use at launch, landing, or retrieval sites. General requirements
BS EN 12173:1999 BS EN 12173:1999. Chemicals used for treatment of water intended for human consumption. Sodium fluoride
BS EN 12126:1999 BS EN 12126:1999. Chemicals used for treatment of water intended for human consumption. Liquefied ammonia
BS EN 12125:1999 BS EN 12125:1999. Chemicals used for treatment of water intended for human consumption. Sodium thiosulfate
BS EN 12124:1999 BS EN 12124:1999. Chemicals used for treatment of water intended for human consumption. Sodium sulfite
BS EN 12123:1999 BS EN 12123:1999. Chemicals used for treatment of water intended for human consumption. Ammonium sulfate
BS EN 12122:1999 BS EN 12122:1999. Chemicals used for treatment of water intended for human consumption. Ammonia solution
BS EN 12121:1999 BS EN 12121:1999. Chemicals used for treatment of water intended for human consumption. Sodium disulfite
BS EN 12120:1999 BS EN 12120:1999. Chemicals used for treatment of water intended for human consumption. Sodium hydrogen sulfite
BS EN 1278:1999 BS EN 1278:1999. Chemicals used for treatment of water intended for human consumption. Ozone
BS ISO 5832-2:1999 BS ISO 5832-2:1999. Implants for surgery. Metallic materials. Unalloyed titanium
BS EN 1722:1999 BS EN 1722:1999. Light conveyor belts. Test method for the determination of the maximum tensile strength
BS EN 1637:1999 BS EN 1637:1999. Light conveyor belts. Test methods for the measurement of the electrical resistances
BS EN 61280-2-1:1999, IEC 61280-2-1:1998 BS EN 61280-2-1:1999, IEC 61280-2-1:1998. Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Receiver sensitivity
BS EN 12631:1999 BS EN 12631:1999. Fruit and vegetable juices. Enzymatic determination of D- and L-lactic acid (lactate) content. NAD spectrometric method
BS EN 12630:1999 BS EN 12630:1999. Fruit and vegetable juices. Determination of glucose, fructose, sorbitol and sucrose contents. Method using high-performance liquid chromatography
BS EN 12632:1999 BS EN 12632:1999. Fruit and vegetable juices. Enzymatic determination of acetic acid (acetate) content. NAD spectrometric method
BS EN ISO 15147:1999 BS EN ISO 15147:1999. Light conveyor belts. Tolerances on widths and lengths of cut light conveyor belts
DC99/645131 DC99/645131. Draft British Standard, BS ISO/IEC 11579-3, Information technology - Telecommunications and information exchange, between systems - Private integrated services network - Refer
BS 6582:2000 BS 6582:2000. Continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products
BS EN 415-3:2000 BS EN 415-3:2000. Safety of packaging machines. Form, fill and seal machines
WD/BS5500 EQ126 WD/BS5500 EQ126. BS 5500-ENQ126 Specification for unfired fusion welded pressure vessels. Requirements for limpet coils
BS EN 12420:1999 BS EN 12420:1999. Copper and copper alloys. Forgings
BS EN ISO/TR 11688-2:2001 BS EN ISO/TR 11688-2:2001. Acoustics. Recommended practice for the design of low-noise machinery and equipment. Introduction to the physics of low-noise design
BS EN 932-2:1999 BS EN 932-2:1999. Tests for general properties of aggregates. Methods for reducing laboratory samples
BS EN ISO 7783-2:1999 BS EN ISO 7783-2:1999. Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination and classification of water-vapour transmissio
DD ENV 1186-14:1999 DD ENV 1186-14:1999. Materials and articles in contact with foodstuffs. Plastics. Test methods for $0Qsubstitute tests$0R for overall migration from plastics intended to come into
DD ENV 1186-13:1999 DD ENV 1186-13:1999. Materials and articles in contact with foodstuffs. Plastics. Test method for overall migration at high temperatures
DD ENV 13130-8:1999 DD ENV 13130-8:1999. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of isocyanates in plastics
DD ENV 13130-7:1999 DD ENV 13130-7:1999. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of monoethylene glycol and diethylene glycol in foo
DD ENV 13130-6:1999 DD ENV 13130-6:1999. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of vinylidene chloride in plastics
DD ENV 13130-5:1999 DD ENV 13130-5:1999. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of vinylidene chloride in food simulants
DD ENV 13130-4:1999 DD ENV 13130-4:1999. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of 1,3-butadiene in plastics
DD ENV 13130-3:1999 DD ENV 13130-3:1999. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of acrylonitrile in food and food simulants
DD ENV 13130-2:1999 DD ENV 13130-2:1999. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Determination of terephthalic acid in food simulants
DD ENV 13130-1:1999 DD ENV 13130-1:1999. Materials and articles in contact with foodstuffs. Plastics substances subject to limitation. Guide to the test methods for the specific migration of substance
BS CECC 265001:1998 BS CECC 265001:1998. Harmonized system of quality assessment for electronic components. Technology approval schedule. Film and hybrid integrated circuits
BS EN 60966-3-2:1999, IEC 60966-3-2:1996 BS EN 60966-3-2:1999, IEC 60966-3-2:1996. Radio frequency and coaxial cable assemblies. Detail specification for flexible coaxial cable assemblies for GSM use
BS EN 60966-2-3:1999, IEC 60966-2-3:1996 BS EN 60966-2-3:1999, IEC 60966-2-3:1996. Radio frequency and coaxial cable assemblies. Detail specification for flexible coaxial cable assemblies
BS EN 12598:1999, BS 5724-2.27:1999 BS EN 12598:1999, BS 5724-2.27:1999. Oxygen monitors for patient breathing mixtures. Particular requirements
BS EN 12484-1:1999 BS EN 12484-1:1999. Irrigation techniques. Automatic turf irrigation systems. Definition of the programme of equipment by the owner
BS EN 1124-3:1999 BS EN 1124-3:1999. Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. System X. Dimensions
BS EN 1124-2:1999 BS EN 1124-2:1999. Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. System S. Dimensions
BS EN 1123-2:1999 BS EN 1123-2:1999. Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Dimensions
BS 3N 3:2000 BS 3N 3:2000. Breathing oxygen for airborne applications
BS EN ISO 10320:1999 BS EN ISO 10320:1999. Geotextiles and geotextile-related products. Identification on site
BS EN 12673:1999, BS 6068-2.65:1999 BS EN 12673:1999, BS 6068-2.65:1999. Water quality. Gas chromatographic determination of some selected chlorophenols in water
BS ISO/IEC 14888-2:1999 BS ISO/IEC 14888-2:1999. Information technology. Security techniques. Digital signatures with appendix. Identity-based mechanisms
BS EN ISO 15098-2:2000 BS EN ISO 15098-2:2000. Dental tweezers. Meriam types
BS EN 50303:2000 BS EN 50303:2000. Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust
BS EN 50284:1999 BS EN 50284:1999. Special requirements for construction, test and marking of electrical apparatus of equipment group II, category 1 G
BS EN 50014:1998 BS EN 50014:1998. Electrical apparatus for potentially explosive atmospheres. General requirements
BS EN 60335-2-37:1996, IEC 60335-2-37:1994 BS EN 60335-2-37:1996, IEC 60335-2-37:1994. Specification for safety of household and similar electrical appliances. Particular requirements. Commercial elec
BS EN 60335-2-38:1996, IEC 60335-2-38:1994 BS EN 60335-2-38:1996, IEC 60335-2-38:1994. Specification for safety of household and similar electrical appliances. Particular requirements. Commercial elec
ISO5366-1 : 2000 (R05) EDTN.4 ISO5366-1 : 2000 (R05) EDTN.4. ISO 5366-1 Anaesthetic and respiratory equipment - Tracheostomy tubes. Part 1: Tubes for use in adults
ISO15792-3 : 2000 EDTN 1 ISO15792-3 : 2000 EDTN 1. ISO 15792-3 Welding consumables - Test methods. Classification testing of positional capacity and root penetration of welding consumables in a fillet
ISO15792-2 : 2000 EDTN 1 ISO15792-2 : 2000 EDTN 1. ISO 15792-2 Welding consumables - Test methods. Preparation of single-run and two-run technique test specimens in steel
BS EN 60774-2:2000, IEC 60774-2:1999 BS EN 60774-2:2000, IEC 60774-2:1999. Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS. FM audio recording
ISO15792-1 : 2000 EDTN 1 ISO15792-1 : 2000 EDTN 1. ISO 15792-1 Welding consumables - Test methods. Test methods for all-weld metal test specimens in steel, nickel and nickel alloys
BS EN 1799:1999 BS EN 1799:1999. Products and systems for the protection and repair of concrete structures. Test methods. Tests to measure the suitability of structural bonding agents for application
BS EN 1169:1999 BS EN 1169:1999. Precast concrete products. General rules for factory production control of glass-fibre reinforced cement
DD ENV 50247-1:1999 DD ENV 50247-1:1999. Pinnacles Component Information Standard 1.2. The PCIS tag library
DD ENV 50247-2:2000 DD ENV 50247-2:2000. Pinnacles Component Information Standard 1.2. The SGML declaration and SGML document type definitions (DTDs)
BS EN 12309-1:2000 BS EN 12309-1:2000. Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW. Safety
BS EN ISO 7785-1:1999, ISO 7785-1:1997 BS EN ISO 7785-1:1999, ISO 7785-1:1997. Dental handpieces. High-speed air turbine handpieces
BS EN 1979:1999, BS 2782-11:Method 1110C:1999 BS EN 1979:1999, BS 2782-11:Method 1110C:1999. Plastics piping and ducting systems. Thermoplastics spirally-formed structured-wall pipes. Determination of
DD ENV 13321-1:1999 DD ENV 13321-1:1999. Data communication for HVAC application automation net. BACnet, Profibus, World FIP
BS EN 12490:1999 BS EN 12490:1999. Durability of wood and wood-based products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood
BS EN 61340-2-3:2000, IEC 61340-2-3:2000 BS EN 61340-2-3:2000, IEC 61340-2-3:2000. Electrostatics. Methods of test for determining the resistance and resistivity of solid planar materials used to avoi
BS EN 12572:1999 BS EN 12572:1999. Artificial climbing structures. Protection points, stability requirements and test methods
PD 6614:1999 PD 6614:1999. Obsolescence management. Guide to the substitution of components in electronic equipment
BS IEC 61831:1999 BS IEC 61831:1999. On-line analyser systems. Guide to design and installation
BS IEC 61832:1999 BS IEC 61832:1999. Analyser systems. Guide to technical enquiry and bid evaluation
BS EN 60770-1:1999, IEC 60770-1:1999 BS EN 60770-1:1999, IEC 60770-1:1999. Transmitters for use in industrial-process control systems. Methods for performance evaluation
BS EN 60534-8-3:2000, IEC 60534-8-3:2000 BS EN 60534-8-3:2000, IEC 60534-8-3:2000. Industrial-process control valves. Noise considerations. Control valve aerodynamic noise prediction method. Control v
BS EN 60216-4-3:2000, IEC 60216-4-3:2000 BS EN 60216-4-3:2000, IEC 60216-4-3:2000. Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating
BS EN 60216-4-2:2001, IEC 60216-4-2:2000 BS EN 60216-4-2:2001, IEC 60216-4-2:2000. Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating
BS EN ISO 9606-4:1999 BS EN ISO 9606-4:1999. Approval testing of welders. Fusion welding. Nickel and nickel alloys
BS ISO 128-23:1999 BS ISO 128-23:1999. Technical drawings. General principles of presentation. Lines on construction drawings
BS EN 60684-3-409:1999, IEC 60684-3-409:1999 BS EN 60684-3-409:1999, IEC 60684-3-409:1999. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving.
BS EN 50134-2:2000 BS EN 50134-2:2000. Alarm systems. Social alarm systems. Trigger devices
PD IEC 61941:1999, IEC/TS 61941:1999 PD IEC 61941:1999, IEC/TS 61941:1999. Optical fibres. Polarization mode dispersion measurement techniques for single-mode optical fibres
BS EN 60350:1999, IEC 60350:1999 BS EN 60350:1999, IEC 60350:1999. Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance
BS EN 997:1999 BS EN 997:1999. WC pans with integral trap
ISO15500-11 : 2001 EDTN 1 ISO15500-11 : 2001 EDTN 1. ISO 15500-11 Road vehicles - compressed natural gas (CNG) fuel system components (ISO/DIS 15500-11). part 11 Gas/air mixer
BS EN ISO 9241-12:1999 BS EN ISO 9241-12:1999. Ergonomic requirements for office work with visual display terminals (VDTs). Presentation of information
PD ISO/TR 14049:2000, ISO/TR 14049:2000 PD ISO/TR 14049:2000, ISO/TR 14049:2000. Environmental management. Life cycle assessment. Examples of application of ISO 14041 to goal and scope definition and
PAS 29:1999 PAS 29:1999. Disposable pulp products for use in healthcare
BS EN 732:1999 BS EN 732:1999. Specifications for dedicated liquefied petroleum gas appliances. Absorption refrigerators
BS EN 61753-2-1:2001, IEC 61753-2-1:2000 BS EN 61753-2-1:2001, IEC 61753-2-1:2000. Fibre optic interconnecting devices and passive components performance standard. Fibre optic connectors terminated on
BS EN ISO 9606-3:1999 BS EN ISO 9606-3:1999. Approval testing of welders. Fusion welding. Copper and copper alloys
BS EN ISO 9455-15:2000 BS EN ISO 9455-15:2000. Soft soldering fluxes. Test methods. Copper corrosion test
BS EN ISO 9455-13:2000 BS EN ISO 9455-13:2000. Soft soldering fluxes. Test methods. Determination of flux spattering
BS EN 12063:1999 BS EN 12063:1999. Execution of special geotechnical work. Sheet pile walls
BS EN ISO 11070:1999 BS EN ISO 11070:1999. Sterile, single-use intravascular catheter introducers
BS EN 12376:1999 BS EN 12376:1999. In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
BS EN 772-10:1999 BS EN 772-10:1999. Methods of test for masonry units. Determination of moisture content of calcium silicate and autoclaved aerated concrete units
DD 249:1999 DD 249:1999. Testing aggregates. Method for the assessment of alkali-silica reactivity. Potential accelerated mortar-bar method
BS EN 50130-5:1999 BS EN 50130-5:1999. Alarm systems. Environmental test methods
BS EN 12571:1999 BS EN 12571:1999. Materials and articles in contact with foodstuffs. Transport units for catering containers containing prepared foodstuffs. Thermal and hygienic requirements and test
DC01/120099 DC01/120099. Draft British Standard BS EN 13763-20 Explosives for civil uses - Detonators and relays. Part 20 Determination of total resistance of electric detonators
WD/BSEN60095-1 : 1993 WD/BSEN60095-1 : 1993 . BS EN 60095-1:1993 Lead-acid starter batteries. General requirements and methods of test
BS EN 12585:1999 BS EN 12585:1999. Glass plant, pipeline and fittings. Pipeline and fittings DN 15 to 1000. Compatibility and interchangeability
WD/BS5500 EQ124 WD/BS5500 EQ124. BS 5500-ENQ 124 Specification for unfired fusion welded pressure vessels. Stiffening rings
BS EN 951:1999 BS EN 951:1999. Door leaves. Method for measurement of height, width, thickness and squareness
BS EN 949:1999 BS EN 949:1999. Windows and curtain walling, doors, blinds and shutters. Determination of the resistance to soft and heavy body impact for doors
BS EN 947:1999 BS EN 947:1999. Hinged or pivoted doors. Determination of the resistance to vertical load
BS EN 61281-1:1999, IEC 61281-1:1999 BS EN 61281-1:1999, IEC 61281-1:1999. Fibre optic communication subsystems. Generic specification
BS EN 12104:2000 BS EN 12104:2000. Resilient floor coverings. Cork floor tiles. Specification
BS EN 12103:1999 BS EN 12103:1999. Resilient floor coverings. Agglomerated cork underlays. Specification
WD/ISO16061 : 2000 WD/ISO16061 : 2000 . ISO 16061 Instrumentation to be used in association with non-active surgical implants
BS EN 1397:1999 BS EN 1397:1999. Heat exchangers. Hydronic room fan coil units. Test procedures for establishing the performance
BS EN ISO 748:2000 BS EN ISO 748:2000. Measurement of liquid flow in open channels. Velocity-area methods
BS EN 13291-1:1999 BS EN 13291-1:1999. Space products assurance. General requirements. Policy and principles
BS EN 13290-1:1999 BS EN 13290-1:1999. Space project management. General requirements. Policy and principles
BS EN 13292:1999 BS EN 13292:1999. Space engineering standards. Policy and principles
DC00/705062 DC00/705062. Draft British Standard, BS EN ISO 16931, Animal and vegetable fats and oils - Determination of polymerized, triglycerides by high performance size-exclusion chromatography (HP
BS EN 50268-2:2000 BS EN 50268-2:2000. Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions. Procedure
BS EN 50268-1:2000 BS EN 50268-1:2000. Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions. Apparatus
BS EN ISO 8442-8:2001 BS EN ISO 8442-8:2001. Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for silver table and decorative holloware
BS EN ISO 8442-7:2001 BS EN ISO 8442-7:2001. Materials and articles in contact with foodstuffs. Cutlery and table holloware. Requirements for table cutlery made of silver, other precious metals and th
BS EN 12221-2:2000 BS EN 12221-2:2000. Changing units for domestic use. Test methods
BS EN 12221-1:2000 BS EN 12221-1:2000. Changing units for domestic use. Safety requirements
BS EN 61331-3:1999, BS 7817-3:1999,IEC 61331-3:1998 BS EN 61331-3:1999, BS 7817-3:1999,IEC 61331-3:1998. Protective devices against diagnostic medical X-radiation. Protective clothing and protective d
DC00/716618 DC00/716618. Draft British Standard BS 341-3 Transportable gas container valves. Part 3: Valve outlet connections
ISO/IEC14776-342 : 2000 EDTN 1 ISO/IEC14776-342 : 2000 EDTN 1. ISO/IEC 14776-342 Information technology - Small computer system interface. Controller Commands-2 (SCSI SCC-2)
BS EN 61754-13:1999, IEC 61754-13:1999 BS EN 61754-13:1999, IEC 61754-13:1999. Fibre optic connector interfaces. Type FC-PC connector family
BS EN 61300-3-33:1999, IEC 61300-3-33:1999 BS EN 61300-3-33:1999, IEC 61300-3-33:1999. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations a
BS EN 60869-1:2000, IEC 60869-1:1999 BS EN 60869-1:2000, IEC 60869-1:1999. Fibre optic attenuators. Generic specification
BS EN ISO 12224-2:1999 BS EN ISO 12224-2:1999. Solder wire, solid and flux cored. Specification and test methods. Determination of flux content
DC99/123117 DC99/123117. Draft British Standard, BS ISO 15493-1, Plastics piping systems for industrial applications -, Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride), (PVC-
BS EN 303-5:1999 BS EN 303-5:1999. Heating boilers. Heating boilers with forced draught burners. Heating boilers for solid fuels, hand and automatically fired, nominal heat output of up to 300 kW. Ter
BS EN 1751:1999 BS EN 1751:1999. Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves
BS EN 415-2:2000 BS EN 415-2:2000. Safety of packaging machines. Pre-formed rigid container packaging machines
BS EN 50270:1999 BS EN 50270:1999. Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
BS EN 60068-2-57:2000, IEC 60068-2-57:1999 BS EN 60068-2-57:2000, IEC 60068-2-57:1999. Environmental testing. Test methods. Test Ff. Vibration. Time-history method
BS EN 60068-2-47:2000, IEC 60068-2-47:1999 BS EN 60068-2-47:2000, IEC 60068-2-47:1999. Environmental testing. Test methods. Mounting of components, equipment and other articles for vibration, impact a
BS EN 60908:1999, IEC 60908:1999 BS EN 60908:1999, IEC 60908:1999. Audio recording. Compact disc digital audio system
BS EN 993-7:2000, BS 1902-4.5:2000 BS EN 993-7:2000, BS 1902-4.5:2000. Methods of test for dense shaped refractory products. Determination of modulus of rupture at elevated temperatures
BS EN 993-5:2000, BS 1902-4.3:2000 BS EN 993-5:2000, BS 1902-4.3:2000. Methods of test for dense shaped refractory products. Determination of cold crushing strength
ISO/TS15539 : 2000 EDTN 1 ISO/TS15539 : 2000 EDTN 1. ISO TS 15539 Cardiovascular implants - Endovascular devices
WD/ISO16369 : 2000 WD/ISO16369 : 2000 . ISO 16369 Lifting Platforms--Mast climbing platforms
BS EN 81714-2:1999, IEC 81714-2:1998 BS EN 81714-2:1999, IEC 81714-2:1998. Design of graphical symbols for use in the technical documentation of products. Specification for graphical symbols in a comp
DC99/706218 DC99/706218. Draft British Standard, BS ISO 16030, Connections for pneumatic fluid power applications - Ports and stud ends
BS EN ISO 4824:1997 BS EN ISO 4824:1997. Dentistry. Ceramic denture teeth
DC00/108040 DC00/108040. Draft British Standard BS EN #DDDD-18 Methods of test for screed materials. Determination of wear resistance (BCA)
BS EN 60626-3:1997, IEC 60626-3:1996 BS EN 60626-3:1997, IEC 60626-3:1996. Combined flexible materials for electrical insulation. Specifications for individual materials
BS EN 60335-2-13:1996, IEC 60335-2-13:1993 BS EN 60335-2-13:1996, IEC 60335-2-13:1993. Specification for safety of household and similar electrical appliances. Particular requirements. Deep fat fryers
BS EN 1854:1997 BS EN 1854:1997. Pressure sensing devices for gas burners and gas burning appliances
DC99/244374 DC99/244374. Draft Amendment to IEC 61000-4-3, Revision of the callibration procedure and verification of the correct, application of the modulation during the test, . 77B/283/CD. Possible
BS EN 60317-53:1999, IEC 60317-53:1999 BS EN 60317-53:1999, IEC 60317-53:1999. Specifications for particular types of winding wires. Aromatic polyamide (aramid) tape wrapped rectangular copper wire, t
BS EN 60317-52:1999, IEC 60317-52:1999 BS EN 60317-52:1999, IEC 60317-52:1999. Specifications for particular types of winding wires. Aromatic polyamide (aramid) tape wrapped round copper wire, tempera
BS EN 60264-3-4:1999, IEC 60264-3-4:1999 BS EN 60264-3-4:1999, IEC 60264-3-4:1999. Packaging of winding wires. Taper barrelled delivery spools. Basic dimensions of containers for taper barrelled deliv
BS EN 60264-3-2:1999, IEC 60264-3-2:1999 BS EN 60264-3-2:1999, IEC 60264-3-2:1999. Packaging of winding wires. Taper barrelled delivery spools. Specification for returnable spools made from thermoplas
DC99/710501 DC99/710501. Draft British Standard, ISO 11748-3, Road vehicles - Technical documentation of electrical and electronic, systems. Part 3: Application example
DC99/710502 DC99/710502. Draft British Standard, ISO 11748-2, Road vehicles - Technical documentation of electrical and electronic, systems. Part 2: Documentation agreement
BS EN 60938-2-2:2000, IEC 60938-2-2:1999 BS EN 60938-2-2:2000, IEC 60938-2-2:1999. Fixed inductors for electromagnetic interference suppression. Blank detail specification. Inductors for which safety
BS EN 60938-2-1:2000, IEC 60938-2-1:1999 BS EN 60938-2-1:2000, IEC 60938-2-1:1999. Fixed inductors for electromagnetic interference suppression. Blank detail specification. Inductors for which safety
BS EN 60601-2-2:2001 BS EN 60601-2-2:2001. Medical electrical equipment. Particular requirements for the safety of high frequency surgical equipment
PD 6634-5:1999 PD 6634-5:1999. Vehicle restraint systems. Development of barrier transitions and terminals
PD 6634-4:1999 PD 6634-4:1999. Vehicle restraint systems. Development of bridge parapets in the United Kingdom
PD 6634-3:1999 PD 6634-3:1999. Vehicle restraint systems. Development of vehicle highway barriers in the United Kingdom
PD 6634-2:1999 PD 6634-2:1999. Vehicle restraint systems. Fundamentals of highway restraint systems
PD 6634-1:1999 PD 6634-1:1999. Vehicle restraint systems. Fundamentals. Database
DD ENV 1999-2:2000 DD ENV 1999-2:2000. Eurocode 9. Design of aluminium structures. Structures susceptible to fatigue
DD ENV 1999-1-2:2000 DD ENV 1999-1-2:2000. Eurocode 9. Design of aluminium structures. General rules. Structural fire design
DD ENV 1999-1-1:2000 DD ENV 1999-1-1:2000. Eurocode 9. Design of aluminium structures. General rules. General rules and rules for buildings
BS EN ISO 11151-2:2000 BS EN ISO 11151-2:2000. Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
BS EN 3774-004:1999 BS EN 3774-004:1999. Circuit breakers, three-pole, temperature compensated, rated currents 2A to 25A, switching capacity 65 In. UNC thread terminals. Product standard
BS EN 3774-003:1999 BS EN 3774-003:1999. Circuit breakers, three-pole, temperature compensated, rated currents 2A to 25A, switching capacity 65 In. Metric thread terminals. Product standard
BS EN 3774-001:1999 BS EN 3774-001:1999. Circuit breakers, three-pole, temperature compensated, rated currents 2A to 25A, switching capacity 65 In. Technical specification
BS EN 3773-004:1999 BS EN 3773-004:1999. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 In/1000 A max. UNC thread terminals. Product standard
BS EN 3773-003:1999 BS EN 3773-003:1999. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 In/1000 A max. Metric thread terminals. Product stand
BS EN 3773-001:1999 BS EN 3773-001:1999. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 In/1000 A max. Technical specification
BS EN 2794-004:1999 BS EN 2794-004:1999. Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals. Product standard
BS EN 2794-003:1999 BS EN 2794-003:1999. Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals. Product standard
BS EN 2794-001:1999 BS EN 2794-001:1999. Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. Technical specification
BS EN 2665-003:1999 BS EN 2665-003:1999. Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals. Product standard
BS EN 2665-001:1999 BS EN 2665-001:1999. Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. Technical specification
BS EN 737-3:2000 BS EN 737-3:2000. Medical gas pipeline systems. Pipelines for compressed medical gases and vacuum
BS EN 61300-3-2:1999, IEC 61300-3-2:1999 BS EN 61300-3-2:1999, IEC 61300-3-2:1999. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and m
BS EN 61300-3-17:2000, IEC 61300-3-17:1999 BS EN 61300-3-17:2000, IEC 61300-3-17:1999. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations a
BS EN ISO 13753:1999 BS EN ISO 13753:1999. Mechanical vibration and shock. Hand-arm vibration. Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm sy
BS EN ISO 13666:1999 BS EN ISO 13666:1999. Ophthalmic optics. Spectacle lenses. Vocabulary
DD ENV 1630:1999 DD ENV 1630:1999. Windows, doors, shutters. Burglar resistance. Test method for the determination of resistance to manual burglary attempts
DD ENV 1629:1999 DD ENV 1629:1999. Windows, doors, shutters. Burglar resistance. Test method for determination of resistance under dynamic loading
DD ENV 1628:1999 DD ENV 1628:1999. Windows, doors, shutters. Burglar resistance. Test method for the determination of resistance under static loading
DD ENV 1627:1999 DD ENV 1627:1999. Windows, doors, shutters. Burglar resistance. Requirements and classification
BS EN 61557-9:2000, IEC 61557-9:1999 BS EN 61557-9:2000, IEC 61557-9:1999. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or m
BS EN 61290-3:2000, IEC 61290-3:2000 BS EN 61290-3:2000, IEC 61290-3:2000. Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters
BS EN ISO 11246:2000 BS EN ISO 11246:2000. Dental ethyl silicate bonded casting investments
DC99/710058 DC99/710058. Draft British Standard BS ISO 15031-4 Road vehicles - Communication between vehicle and external equipment for emission related diagnostics . Part 4: External test equipment
DD ENV ISO 12960:2000 DD ENV ISO 12960:2000. Geotextiles and geotextile-related products. Screening test method for determining the resistance to liquids
ISO4951-3 : 2001 EDTN 1 ISO4951-3 : 2001 EDTN 1. ISO 4951-3 High yield strength steel bars and sections. Delivery conditions for thermomechanically-rolled steels
ISO4951-2 : 2001 EDTN 1 ISO4951-2 : 2001 EDTN 1. ISO 4951-2 High yield strength steel bars and sections. Delivery conditions for normalized, normalized rolled and as-rolled steels
ISO4951-1 : 2001 EDTN 1 ISO4951-1 : 2001 EDTN 1. ISO 4951-1 High yield strength steel bars and sections. General delivery conditions
BS EN 60417-1:1999, IEC 60417-1:1998 BS EN 60417-1:1999, IEC 60417-1:1998. Graphical symbols for use on equipment. Overview and application
WD/BSEN60417-2 : 1999 WD/BSEN60417-2 : 1999 . BS EN 60417-2 Graphical symbols for use on equipment. Symbol originals
ISO15793 : 2000 EDTN 1 ISO15793 : 2000 EDTN 1. ISO 15793 Durum wheat semolina - Determination of the undersize fraction
BS EN 12068:1999 BS EN 12068:1999. Cathodic protection. External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection. Tapes
BS ISO 701:1998 BS ISO 701:1998. International gear notation. Symbols for geometrical data
WD/ISO16163 : 2000 EDTN 1 WD/ISO16163 : 2000 EDTN 1. ISO 16163 Continuously hot-dipped coated sheet steel products-Dimensional and shape tolerances
WD/ISO16162 : 2000 EDTN 1 WD/ISO16162 : 2000 EDTN 1. ISO 16162 Continuously cold-rolled sheet steel products-Dimensional and shape tolerances
WD/ISO16160 : 2000 EDTN 1 WD/ISO16160 : 2000 EDTN 1. ISO 16160 Continuously hot-rolled sheet steel products-Dimensional shape and tolerances.
WD/ISO6316 : 2000 3RD EDTN. WD/ISO6316 : 2000 3RD EDTN. . ISO 6316 Hot-rolled steel strip of structural quality
BS EN ISO 9241-5:1999 BS EN ISO 9241-5:1999. Ergonomic requirements for office work with visual display terminals (VDTs). Workstation layout and postural requirements
ISO8782-5 : 2000 ISO8782-5 : 2000 . ISO 8782-5 Safety, protective and occupational footwear for professional use. Part 5: Additional requirements and test methods
BS EN 46003:1999 BS EN 46003:1999. Quality systems. Medical devices. Particular requirements for the application of EN ISO 9003
BS EN 170000:1999 BS EN 170000:1999. Harmonized system of quality assessment for electronic components. Generic specification: waveguide type dielectric resonators
DC99/563147 DC99/563147. Draft British Standard BS ISO 5841-3 Implants for surgery - Cardiac pacemakers. Part 3: Low-profile connectors (IS-1) for implantable pacemakers
BS EN ISO 1746:2001 BS EN ISO 1746:2001. Rubber or plastics hoses and tubing. Bending tests
BS EN 1845:1999 BS EN 1845:1999. Footwear manufacturing machines. Footwear moulding machines. Safety requirements
BS 8855-2:2000 BS 8855-2:2000. Soil analysis. Method for determination of coal tar-derived phenolic compounds
PAS 25:1999 PAS 25:1999. Plastics frames for use in gully tops and manhole tops for pedestrian areas
DC99/654250 DC99/654250.
DD ENV 13372:1999 DD ENV 13372:1999. Road traffic and transport telematics (RTTT). Dedicated short-range communication (DSRC). DSRC profiles for RTTT applications
WD/ISO14705 : 2000 WD/ISO14705 : 2000 . ISO 14705 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature
WD/ISO14703 : 2000 WD/ISO14703 : 2000 . ISO 14703 Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic pow
BS EN 303-4:1999 BS EN 303-4:1999. Heating boilers. Heating boilers with forced draught burners. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil b
WD/ISO8601 : 2000 EDTN 2 WD/ISO8601 : 2000 EDTN 2. ISO 8601 Data elements and interchange formats - Information interchange - Representation of dates and times
PD R009-002:1999 PD R009-002:1999. Guide for the use of the terminology for testing procedures
PD ES 59008-6-1:1999 PD ES 59008-6-1:1999. Data requirements for semiconductor die. Exchange data formats and data dictionary. Data exchange. DDX file format
PAS 015:1999 PAS 015:1999. Helmets for equestrian use
BS EN 1644-2:2000 BS EN 1644-2:2000. Test methods for nonwoven compresses for medical use. Finished compresses
BS EN ISP 15124-1:1999 BS EN ISP 15124-1:1999. Information technology. International standardized profile FOD126. Open document format: image applications. Enhanced document structure. Character, rast
ISO8287 : 2000 ISO8287 : 2000 . ISO 8287 Unalloyed magnesium ingots - Chemical composition
WD/ISO16220 : 2000 (1ST EDTN.) WD/ISO16220 : 2000 (1ST EDTN.) . ISO 16220 Magnesium and magnesium alloys - Magnesium alloy ingots and castings
BS EN 133200:1999 BS EN 133200:1999. Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression (filte
BS ISO/IEC TR 15294:2000 BS ISO/IEC TR 15294:2000. Information technology. Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
BS EN 60660:2000, IEC 60660:1999 BS EN 60660:2000, IEC 60660:1999. Insulators. Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not inc
DC99/654250 DC99/654250. Draft British Standard, BS ISO/IEC 14496-6-A1, Information technology - Generic coding of moving pictures and associated, audio information. Delivery Multimedia Integration Fr
BS EN 50321:2000 BS EN 50321:2000. Electrically insulating footwear for working on low voltage installations
BS EN 61076-2:1999, IEC 61076-2:1998 BS EN 61076-2:1999, IEC 61076-2:1998. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Circul
DD ENV 583-6:2000 DD ENV 583-6:2000. Non-destructive testing. Ultrasonic examination. Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
DC99/202081 DC99/202081. Draft British Standard, BS IEC 60947-2, Low voltage switchgear and controlgear. Circuit breakers
PD IEC TR 61361:1999, CENELEC Tech Report R013-001 PD IEC TR 61361:1999, CENELEC Tech Report R013-001. Electricity metering. Local and remote data exchange. Applications and performance
BS EN 62056-31:2000 BS EN 62056-31:2000. Electricity metering. Data exchange for meter reading, tariff and load control. Use of local area networks on twisted pair with carrier signalling
ISO5367 : 2000 (R05) (EDTN 4) ISO5367 : 2000 (R05) (EDTN 4) . ISO 5367 Breathing tubes intended for use with anaesthetic apparatus and ventilators
BS EN 60127-3:1996, IEC 60127-3:1988 + A1:1991 BS EN 60127-3:1996, IEC 60127-3:1988 + A1:1991. Miniature fuses. Specification for sub-miniature fuse-links
DC99/565981 DC99/565981. Draft British Standard, BS EN 13274-6, Respiratory protective devices - Methods of test. Part 6: Determination of carbon dioxide content of inhalation air
BS EN 13044:2001 BS EN 13044:2001. Swap bodies. Coding, identification and marking
BS EN 1253-3:1999 BS EN 1253-3:1999. Gullies for buildings. Quality control
BS EN 61209:1999, IEC 61209:1999 BS EN 61209:1999, IEC 61209:1999. Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requir
BS EN 61023:2000, IEC 61023:1999 BS EN 61023:2000, IEC 61023:1999. Maritime navigation and radiocommunication equipment and systems. Marine speed and distance measuring equipment (SDME). Performance r
BS EN 12022:1999 BS EN 12022:1999. Blood-gas exchangers
BS EN 60118-6:1999 (Edition 2), IEC 60118-6:1999 Edition 2 BS EN 60118-6:1999 (Edition 2), IEC 60118-6:1999 Edition 2. Hearing aids. Characteristics of electrical input circuits for hearing aids
BS EN 60268-3:2001, IEC 60268-3:2001 BS EN 60268-3:2001, IEC 60268-3:2001. Sound system equipment. Amplifiers
BS 7870-6.3:1999 BS 7870-6.3:1999.
BS 7870-6.2:1999 BS 7870-6.2:1999.
BS EN 41003:1999 BS EN 41003:1999. Particular safety requirements for equipment to be connected to telecommunications networks
DD ENV ISO 14816:2000 DD ENV ISO 14816:2000. Road transport and traffic telematics. Automatic vehicle and equipment identification. Numbering and data structures
BS EN 1273:2001 BS EN 1273:2001. Child care articles. Baby walking frames. Safety requirements and test methods
DD ENV ISO 14815:2000 DD ENV ISO 14815:2000. Road transport and traffic telematics. Automatic vehicle and equipment identification. System specification
BS EN 61969-1:2000, IEC 61969-1:1999 BS EN 61969-1:2000, IEC 61969-1:1999. Mechanical structures for electronic equipment. Outdoor enclosures. Design guidelines
BS EN 61300-3-6:1997, IEC 61300-3-6:1997 BS EN 61300-3-6:1997, IEC 61300-3-6:1997. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and m
BS EN 61300-2-45:1999, IEC 61300-2-45:1999 BS EN 61300-2-45:1999, IEC 61300-2-45:1999. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Durabil
BS EN 12115:2000 BS EN 12115:2000. Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification
BS 4317-21:1999 BS 4317-21:1999. Methods of test for cereals and pulses. Determination of rheological properties of doughs using an extensograph
BS 4317-20:1999 BS 4317-20:1999. Methods of test for cereals and pulses. Determination of water absorption of flour and rheological properties of doughs using a farinograph
BS 7917:1999 BS 7917:1999. Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
BS EN 50144-2-2:2000 BS EN 50144-2-2:2000. Safety of hand-held electric motor operated tools. Particular requirements for screwdrivers and impact wrenches
DD ENV 13777:2000 DD ENV 13777:2000. Road transport and traffic telematics. DATEX specifications for data exchange between traffic and travel information centres (version 1.2a)
BS EN 50144-2-1:2000 BS EN 50144-2-1:2000. Safety of hand-held electric motor operated tools. Particular requirements for drills
BS EN 60893-3-2:2000, IEC 60893-3-2:1998 BS EN 60893-3-2:2000, IEC 60893-3-2:1998. Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specificat
ISO/TS13475-2 : 2000 EDTN 1 ISO/TS13475-2 : 2000 EDTN 1. ISO 13475-2 Stationary audible warning devices used outdoors. Part 2: Determination of sound emission quantities - Precision methods
WD/ISO/IECISP11186-3 : 2000 WD/ISO/IECISP11186-3 : 2000 . ISO/IEC ISP 11186-3 Information technology - International Standardized Profiles FVT3nn - Virtual Terminal Basic Class - Register of attribute
PD ES 59008-4-4:2000, ES 59008-4-4:1999 PD ES 59008-4-4:2000, ES 59008-4-4:1999. Data requirements for semiconductor die. Specific requirements and recommendations. Electrical simulation
PD ES 59008-4-3:2000, ES 59008-4-3:1999 PD ES 59008-4-3:2000, ES 59008-4-3:1999. Data requirements for semiconductor die. Specific requirements and recommendations. Thermal
PD ES 59008-4-2:2001, ES 59008-4-2:2000 PD ES 59008-4-2:2001, ES 59008-4-2:2000. Data requirements for semiconductor die. Specific requirements and recommendations. Handling and storage
PD ES 59008-4-1:2001, ES 59008-4-1:2000 PD ES 59008-4-1:2001, ES 59008-4-1:2000. Data requirements for semiconductor die. Specific requirements and recommendations. Test and quality
DC99/563723 DC99/563723. Draft British Standard, BS IEC 61217-A1, Radiotherapy equipment - Coordinates, movements and scales
PD ES 59008-3:1999 PD ES 59008-3:1999. Data requirements for semiconductor die. Mechanical, material and connectivity requirements
PD ES 59008-2:1999 PD ES 59008-2:1999. Data requirements for semiconductor die. Vocabulary
PD ES 59008-1:2000, ES 59008-1:1999 PD ES 59008-1:2000, ES 59008-1:1999. Data requirements for semiconductor die. General requirements
DD ENV 13149-1:2000 DD ENV 13149-1:2000. Public transport. Road vehicle scheduling and control systems. WORLDFIP definition and application rules for onboard data transmission
BS 1000:Auxiliaries 1e [41/435]:1999 BS 1000:Auxiliaries 1e [41/435]:1999. Universal Decimal Classification. English full edition. Universal Decimal Classification. Auxiliary table 1e [41/435], Common
BS EN ISO 13789:1999 BS EN ISO 13789:1999. Thermal performance of buildings. Transmission heat loss coefficient. Calculation method
BS EN 2591-412:1999 BS EN 2591-412:1999. Elements of electrical and optical connection. Test methods. Contact insertion and extraction forces
BS EN 2591-407:1999 BS EN 2591-407:1999. Elements of electrical and optical connection. Test methods. Durability of contact retention system and seals
BS EN 61429:1997, IEC 61429:1995 BS EN 61429:1997, IEC 61429:1995. Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135
BS ISO 13332:2000 BS ISO 13332:2000. Reciprocating internal combustion engines. Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal c
BS EN 2591-409:1999 BS EN 2591-409:1999. Elements of electrical and optical connection. Test methods. Contact retention in insert
BS AU 138b:2000 BS AU 138b:2000. Towing vehicle, trailer and semi-trailer pneumatic braking systems. "Contact" type couplings
WD/ISO/IEC8802-11 : 1999 WD/ISO/IEC8802-11 : 1999 . ISO/IEC 8802-11 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specif
DC99/565513 DC99/565513. Draft British Standard, BS ISO 16284, Ophthalmic optics-Information interchange for ophthalmic optical equipment
BS EN ISO 13786:1999 BS EN ISO 13786:1999. Thermal performance of building components. Dynamic thermal characteristics. Calculation methods
BS EN 1238:1999 BS EN 1238:1999. Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball)
BS EN 50293:2001 BS EN 50293:2001. Electromagnetic compatibility. Road traffic signal systems. Product standard
DD ENV ISO 14819-3:2001 DD ENV ISO 14819-3:2001. Traffic and travel information (TTI). TTI Messages via traffic message coding. Location referencing for ALERT-C
BS EN ISO 6284:1999 BS EN ISO 6284:1999. Construction drawings. Indication of limit deviations
BS EN 1065:1999 BS EN 1065:1999. Adjustable telescopic steel props. Product specifications, design and assessment by calculation and tests
BS EN ISO 9241-13:1999 BS EN ISO 9241-13:1999. Ergonomic requirements for office work with visual display terminals (VDTs). User guidance
BS ISO/IEC 11770-3:1999 BS ISO/IEC 11770-3:1999. Information technology. Security techniques. Key management. Mechanisms using asymmetric techniques
BS EN 60872-2:1999, IEC 60872-2:1999 BS EN 60872-2:1999, IEC 60872-2:1999. Maritime navigation and radiocommunication equipment and systems. Radar plotting aids. Automatic tracking aids (ATA). Methods
BS EN ISO 11990:2000 BS EN ISO 11990:2000. Optics and optical instruments. Lasers and laser-related equipment. Determination of laser resistance of tracheal tube shafts
BS EN 60130-17:1999, IEC 60130-17:1998 BS EN 60130-17:1999, IEC 60130-17:1998. Connectors for frequencies below 3 MHz. Detail specification for interconnection devices which permit multi-directional m
ISO/IEC8882-2 : 2000 ISO/IEC8882-2 : 2000 . ISO/IEC 8882-2 Information technology - Telecommunications and information exchange between systems - X.25 DTE conformance testing. Data link layer conforma
BS EN 60424-1:2000, IEC 60424-1:1999 BS EN 60424-1:2000, IEC 60424-1:1999. Guidance of the limits of surface irregularities of ferrite cores. General specification
BS EN 50083-10:1999 BS EN 50083-10:1999. Cabled distribution systems for television and sound signals. System performance for return paths
DC99/123597 DC99/123597. Draft British Standard, BS ISO 6993, Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of, gaseous fuels- Specification
DC00/561657 DC00/561657. Draft British Standard BS ISO 8624 Ophthalmic optics - Spectacle frames - Measuring systems
99/563633DC 99/563633DC. Draft British Standard BS EN ISO 16021 Urine-absorbing aids - Evaluation of single-use adult-urine-absorbing aids from the perspective of users and caregivers
BS EN 60398:1999, IEC 60398:1999 BS EN 60398:1999, IEC 60398:1999. Industrial electroheating installations. General test methods
ISO/IECTR15044 : 2000 EDTN 1 ISO/IECTR15044 : 2000 EDTN 1. ISO/IEC TR 15044 Information technology - Terminology for Home Electronic Systems (HES)
ISO15223 : 2000 ISO15223 : 2000 . ISO 15223 Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied (Type 3 technical report)
ISO6930-1 : 2001 EDTN 1 ISO6930-1 : 2001 EDTN 1. ISO 6930-1 High yield strength flat steel products for cold forming Part 1: Delivery conditions for themomechanically-rolled steels
BS EN 45510-6-4:2000 BS EN 45510-6-4:2000. Guide for the procurement of power station equipment. Turbine auxiliaries. Pumps. Pumps
ISO1087-1 : 2000 EDTN 1 ISO1087-1 : 2000 EDTN 1. ISO 1087-1 Terminology work - Vocabulary. Theory and applications
ISO14250 : 2000 (R05) EDTN 1 ISO14250 : 2000 (R05) EDTN 1. ISO 14250 Steel- Metallographic characterization of duplex grain size and distributions.
BS EN 61069-8:1999, IEC 61069-8:1999 BS EN 61069-8:1999, IEC 61069-8:1999. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Assessment
BS EN 61069-7:1999, IEC 61069-7:1999 BS EN 61069-7:1999, IEC 61069-7:1999. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Assessment
BS 598-102:1996 BS 598-102:1996. Sampling and examination of bituminous mixtures for roads and other paved areas. Analytical test methods
DC99/101024 DC99/101024. Draft British Standard, BS 598-102, Sampling and examination of bituminous mixtures for roads and other paved, areas. Part 102 : Analytical test methods
BS ISO/IEC 14598-1:1999 BS ISO/IEC 14598-1:1999. Information technology. Software production evaluation. General overview
BS EN 50237:2000 BS EN 50237:2000. Gloves and mitts with mechanical protection for electrical purposes
DC99/714046 DC99/714046. Draft Standard, ISO 11119-1, Gas cylinders of composite material - Specification and test methods. Hoop wrapped composite gas cylinders
DC99/714047 DC99/714047. Draft Standard, ISO 11119-2, Gas cylinders of composite material - Specification and test methods. Fully-wrapped fibre reinforced composite gas cylinders with load sharing met
DC99/714048 DC99/714048. Draft Standard, ISO 11119-3, Gas cylinders of composite material - Specification and test methods. Fully-wrapped fibre reinforced composite gas cylinders with non-metallic and
ISO3527 : 2000 EDTN 2 ISO3527 : 2000 EDTN 2. ISO 3527 Oil of parsley fruits (Petroselinum sativum Hoffm., Petroselinum crispum L.)
BS EN 61000-6-2:1999, IEC 61000-6-2:1999 BS EN 61000-6-2:1999, IEC 61000-6-2:1999. Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments. Generic immunity standa
ISO14744-6 : 2000 ISO14744-6 : 2000 . ISO 14744-6 Welding - Acceptance inspection of electron beam welding machines. Measurement of stability of spot position
ISO14744-5 : 2000 ISO14744-5 : 2000 . ISO 14744-5 Welding - Acceptance inspection of electron beam welding machines. Measurement of run-out accuracy
ISO14744-4 : 2000 ISO14744-4 : 2000 . ISO 14744-4 Welding - Acceptance inspection of electron beam welding machines. Measurement of welding speed.
DC99/241970 DC99/241970. Draft British Standard BS IEC 61000-4-4-A2 Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test Basic EMC pub
ISO14744-3 : 2000 ISO14744-3 : 2000 . ISO 14744-3 Welding - Acceptance inspection of electron beam welding machines. Measurement of beam current
ISO14744-2 : 2000 ISO14744-2 : 2000 . ISO 14744-2 Welding - Acceptance inspection of electron beam welding machines. Measurement of accelerating voltage
WD/ISO14744-1 : 2000 WD/ISO14744-1 : 2000 . ISO 14744-1 Welding - Acceptance inspection of electron beam welding machines. Principles and acceptance conditions
ISO/TS14253-2 : 1999 (R05) ISO/TS14253-2 : 1999 (R05) . ISO TS 14253-2 Geometrical Product Specifications(GPS) -Inspection by measurement of workpieces and measuring equipment. Guide to the estimation
DC99/714151 DC99/714151. Draft British Standard, BS ISO 15630-2, Steel for the reinforcement and prestessing of concrete - test methods. welded fabric
DC99/563951 DC99/563951. Draft British Standard, BS ISO 13473-3, Characterization of pavement texture by use of surface profiles. Part 3: Specifications and classification of profilometers
BS EN 61837-1:1999, IEC 61837-1:1999 BS EN 61837-1:1999, IEC 61837-1:1999. Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. P
BS ISO/IEC 14771:1999 BS ISO/IEC 14771:1999. Information technology. Open distributed. Processing. Naming framework
DC00/705734 DC00/705734. Draft British Standard, BS ISO 15663-3, Petroleum and natural gas industries - Life cycle costing. Part 3: Process facilities
DC00/707801 DC00/707801. Draft British Standard BS ISO 15663-2 Petroleum and natural gas industries - Life cycle costing. Part 2: Guidance on application of methodology and calculation methods
DC99/714369 DC99/714369. Draft British Standard, BS ISO 15546, Petroleum and natural gas industries - Aluminium alloy drill pipe
ISO/TR14600 : 2000 EDTN 1 ISO/TR14600 : 2000 EDTN 1. ISO 14600 Transportable gas cylinders - International quality assurance system
WD/ISO6317 : 2000 2ND EDTN WD/ISO6317 : 2000 2ND EDTN . ISO 6317 Hot rolled carbon steel strip of commercial and drawing qualities.
WD/ISO5950 : 2000 EDTN 3 WD/ISO5950 : 2000 EDTN 3. ISO 5950 Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
BS EN 61249-2-12:1999, IEC 61249-2-12:1999 BS EN 61249-2-12:1999, IEC 61249-2-12:1999. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unc
BS EN 61249-3-5:1999, IEC 61249-3-5:1999 BS EN 61249-3-5:1999, IEC 61249-3-5:1999. Materials for interconnection structures. Sectional specification set for unreinforced base materials, clad and uncla
BS EN 61249-3-4:1999, IEC 61249-3-4:1999 BS EN 61249-3-4:1999, IEC 61249-3-4:1999. Materials for interconnection structures. Sectional specification set for unreinforced base materials, clad and uncla
BS EN 61249-3-3:1999, IEC 61249-3-3:1999 BS EN 61249-3-3:1999, IEC 61249-3-3:1999. Materials for interconnection structures. Sectional specification set for unreinforced base materials, clad and uncla
BS EN 50123-7-3:1999 BS EN 50123-7-3:1999. Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems. Isolating
BS EN 50123-7-2:1999 BS EN 50123-7-2:1999. Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems. Isolating
BS EN 13401:1999 BS EN 13401:1999. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of Clostridium perfringens. Colony count technique
BS EN 196403:2000 BS EN 196403:2000. Harmonized systems of quality assessment for electronic components. Blank detail specification: push button switches. Assessment level Y
BS EN 196103:2000 BS EN 196103:2000. Blank detail specification: Rotary switches. Assessment level Y
BS EN 12696:2000 BS EN 12696:2000. Cathodic protection of steel in concrete
BS EN ISO 8560:1999 BS EN ISO 8560:1999. Construction drawings. Representation of modular sizes, lines and grids
BS EN ISO 3766:1999 BS EN ISO 3766:1999. Construction drawings. Simplified representation of concrete reinforcement
BS ISO 4097:2000 BS ISO 4097:2000. Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure
DC00/703851 DC00/703851. Draft British Standard, BS EN 13816, Transport Services - Public passenger transport - Service definition, and performance targeting and measurement
BS AU 187:2000 BS AU 187:2000. Tow rope assemblies for towing passenger cars and light vans
BS EN 1458-2:1999 BS EN 1458-2:1999. Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW. Rational use of energy
BS EN 1458-1:2000 BS EN 1458-1:2000. Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW. Safety
DC99/245379 DC99/245379. Draft British Standard BS IEC 61000-4-15-A1 Electromagnetic compatibility (EMC). Testing and measurement techniques. Functional and design specifications.
ISO14232 : 2000 (EDTN.1) ISO14232 : 2000 (EDTN.1) . ISO 14232 Thermal spraying - Powders - Composition and technical supply conditions
BS EN 61587-1:2000, IEC 61587-1:1999 BS EN 61587-1:2000, IEC 61587-1:1999. Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Climatic, mechanical tests and safety aspe
BS EN 50227:1999 BS EN 50227:1999. Control circuit devices and switching elements proximity sensors, d.c. interface for proximity sensors and switching amplifiers (NAMUR)
BS EN 61076-4-103:1999, IEC 61076-4-103:1999 BS EN 61076-4-103:1999, IEC 61076-4-103:1999. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data appl
ISO9809-3 : 2000 EDTN 1 ISO9809-3 : 2000 EDTN 1. ISO 9809-3 Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing. Normalized steel cylinders
DC99/712265 DC99/712265. Draft British Standard, BS ISO 9809-3, Gas cylinders - Refillable seamless steel gas cylinders - Design,, construction and testing. Normalized steel cylinders
BS 7570:2000 BS 7570:2000. Code of practice for validation of arc welding equipment
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
