BIS Standards Catalogue
WD/98/260973DC WD/98/260973DC. IEC 60684-3-145 to 147. Flexible insulating sleeving. Part 3. Specifications for individual types of sleeving. Sheets 145 to 147. Extruded PTFE sleeving (IEC/15C/964/CDV
BS 5489-8:1998 BS 5489-8:1998. Road lighting. Code of practice for lighting that may affect the safe use of aerodromes, railways, harbours and navigable inland waterways
BS 192-2:1998 BS 192-2:1998. Open-ended wrenches. BS and Whitworth
BS 5763-13:1998 BS 5763-13:1998. Methods for microbiological examination of food and animal feeding stuffs. Enumeration of Escherichia coli. Colony-count technique at 44°C using membranes
BS 6913-3:1998, ISO 7129:1997 BS 6913-3:1998, ISO 7129:1997. Operation and maintenance of earth-moving machinery. Specification for cutting edges used on tractor-dozers, graders and scrapers. Principa
BS ISO 11907-4:1998 BS ISO 11907-4:1998. Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Dynamic decomposition method using a conical radiant heater
98/706277DC 98/706277DC. ISO 10231:1997/DAM 1. Motorcycle tyres. Test methods for verifying tyre capabilities. Amendment 1
BS ISO 11907-1:1998 BS ISO 11907-1:1998. Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Guidance
BS ISO 11907-3:1998 BS ISO 11907-3:1998. Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Dynamic decomposition method using a travelling furnace
98/540940DC 98/540940DC. ISO/DIS 11393-3. Protective clothing for users of hand-held chain-saws. Part 3. Test methods for footwear. Part 3: Test methods for footwear
98/637039DC 98/637039DC. prEN 50098-1. Customer premises cabling for information technology. Part 1. ISDN basic access. Part 1 ISDN basic access
BS ISO 11599:1997 BS ISO 11599:1997. Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste
BS EN 12083:1998 BS EN 12083:1998. Respiratory protective devices. Filters with breathing hoses, (non-mask mounted filters). Particle filters, gas filters, and combined filters. Requirements, testing,
BS ISO 69:1998 BS ISO 69:1998. Cinematography. 16 mm motion-picture magnetic film. Cutting and perforating dimensions
98/201414DC 98/201414DC. EN 60034-12:1995. Rotating electrical machines. Part 12. Starting performance of single-speed three-phase cage induction motors for voltages up to and including 690 V, 50 Hz (
98/560828DC 98/560828DC. BS EN 45502-2-2. Active implantable medical devices. Part 2-2. Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes inpla
BS EN 186270:1998 BS EN 186270:1998. Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type LSH
DISC PD 3000:1998 DISC PD 3000:1998. Information security management: an introduction
DISC PD 3001:1998 DISC PD 3001:1998. Preparing for BS 7799 certification
DISC PD 3002:1998 DISC PD 3002:1998. Guide to BS 7799 risk assessment and risk management
DISC PD 3003:1998 DISC PD 3003:1998. Are you ready for a BS 7799 audit?
DISC PD 3004:1998 DISC PD 3004:1998. Guide to BS 7799 auditing
BS EN 233:1997 BS EN 233:1997. Wallcoverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wallcoverings
BS 3598:1998 BS 3598:1998. Fissile materials. Criticality safety in handling and processing. Recommendations
DISC PD 2000-3:1998 DISC PD 2000-3:1998. Understanding the century date change problem
BS EN 60268-16:1998, BS 6840-16:1998,IEC 60268-16:1998 BS EN 60268-16:1998, BS 6840-16:1998,IEC 60268-16:1998. Sound system equipment. Objective rating of speech intelligibility by speech transmission
BS EN 60849:1998, IEC 60849:1998 BS EN 60849:1998, IEC 60849:1998. Sound systems for emergency purposes
BS EN 60503:1998, IEC 60503:1998 BS EN 60503:1998, IEC 60503:1998. Spools for broadcast videotape recorders (VTRS)
BS EN 60118-14:1998, IEC 60118-14:1998 BS EN 60118-14:1998, IEC 60118-14:1998. Hearing aids. Specification of a digital interface device
BS EN 60679-4-1:1998, IEC 60679-4-1:1998 BS EN 60679-4-1:1998, IEC 60679-4-1:1998. Quartz crystal controlled oscillators of assessed quality. Blank detail specification. Capability approval
BS EN 61810-5:1999, IEC 61810-5:1998 BS EN 61810-5:1999, IEC 61810-5:1998. Electromechanical non-specified time all-or-nothing relays. Insulation coordination
BS EN 61333:1998, IEC 61333:1996 BS EN 61333:1998, IEC 61333:1996. Marking on U and E ferrite cores
BS EN 61846:1999, IEC 61846:1998 BS EN 61846:1999, IEC 61846:1998. Ultrasonics. Pressure pulse lithotripters. Characteristics of fields
BS EN 61760-2:1998, IEC 61760-2:1998 BS EN 61760-2:1998, IEC 61760-2:1998. Surface mounting technology. Transportation and storage conditions of surface mounting devices (SMD). Application guide
BS EN 61883-1:1998, IEC 61883-1:1998 BS EN 61883-1:1998, IEC 61883-1:1998. Consumer audio/video equipment. Digital interface. General
BS EN 61883-2:1998, IEC 61883-2:1998 BS EN 61883-2:1998, IEC 61883-2:1998. Consumer audio/video equipment. Digital interface. SD-DVCR data transmission
BS EN 61883-3:1998, IEC 61883-3:1998 BS EN 61883-3:1998, IEC 61883-3:1998. Consumer audio/video equipment. Digital interface. HD-DVCR data transmission
BS EN 61883-4:1998, IEC 61883-4:1998 BS EN 61883-4:1998, IEC 61883-4:1998. Consumer audio/video equipment. Digital interface. MPEG2-TS data transmission
BS EN 61883-5:1998, IEC 61883-5:1998 BS EN 61883-5:1998, IEC 61883-5:1998. Consumer audio/video equipment. Digital interface. SDL-DVCR data transmission
BS EN 61920:1998, IEC 61920:1998 BS EN 61920:1998, IEC 61920:1998. Infrared transmission systems. Free air applications
BS EN 12347:1998 BS EN 12347:1998. Biotechnology. Performance criteria for steam sterilizers and autoclaves
BS EN 972:1998 BS EN 972:1998. Tannery machines. Reciprocating roller machines. Safety requirements
BS 684-2.47:1998, ISO 15302:1998 BS 684-2.47:1998, ISO 15302:1998. Methods of analysis of fats and fatty oils. Other methods. Determination of benzo[α]pyrene content by reverse-phase high-performance
BS EN 60601-2-7:1998, BS 5724-2.7:1998,IEC 60601-2-7:1998 BS EN 60601-2-7:1998, BS 5724-2.7:1998,IEC 60601-2-7:1998. Medical electrical equipment. Particular requirements for safety. Specification for
BS EN 61675-3:1998, IEC 61675-3:1998 BS EN 61675-3:1998, IEC 61675-3:1998. Radionuclide imaging devices. Characteristics and test conditions. Gamma camera based wholebody imaging systems
BS EN ISO 11905-1:1998, BS 6068-2.62:1998 BS EN ISO 11905-1:1998, BS 6068-2.62:1998. Water quality. Determination of nitrogen. Method using oxidative digestion with peroxodisulfate
BS EN 60601-2-40:1998, BS 5724-2.40:1998,IEC 60601-2-40:1998 BS EN 60601-2-40:1998, BS 5724-2.40:1998,IEC 60601-2-40:1998. Medical electrical equipment. Particular requirements for safety. Specificati
BS ISO 14408:1998 BS ISO 14408:1998. Tracheal tubes designed for laser surgery. Requirements for marking and accompanying information
BS 7251-14:1998, ISO 7207-2:1998 BS 7251-14:1998, ISO 7207-2:1998. Orthopaedic joint prostheses. Components for partial and total knee-joint prostheses. Articulating surfaces made of metal, ceramic an
BS EN 1911-1:1998 BS EN 1911-1:1998. Stationary source emissions. Manual method of determination of HCI. Sampling of gases
BS EN 1911-2:1998 BS EN 1911-2:1998. Stationary source emissions. Manual method of determination of HCI. Gaseous compounds absorption
BS EN 1911-3:1998 BS EN 1911-3:1998. Stationary source emissions. Manual method of determination of HCI. Absorption solutions analysis and calculation
BS EN 1706:1998 BS EN 1706:1998. Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties
BS EN 10228-3:1998 BS EN 10228-3:1998. Non-destructive testing of steel forgings. Ultrasonic testing of ferritic or martensitic steel forgings
BS ISO 3086:1998 BS ISO 3086:1998. Iron ores. Experimental methods for checking the bias of sampling
DD ENV 1090-1:1998 DD ENV 1090-1:1998. Execution of steel structures. General rules and rules for buildings (together with United Kingdom national application document)
BS EN ISO 14160:1998 BS EN ISO 14160:1998. Sterilization of single-use medical devices incorporating materials of animal origin. Validation and routine control of sterilization by liquid chemical ster
BS 7755-5.4:1998, ISO 11277:1998 BS 7755-5.4:1998, ISO 11277:1998. Soil quality. Physical methods. Method by sieving and sedimentation
BS 6068-4.12:1998, ISO 11731:1998 BS 6068-4.12:1998, ISO 11731:1998. Water quality. Microbiological methods. Detection and enumeration of Legionella
BS 7012-10.4:1998, ISO 15362:1998 BS 7012-10.4:1998, ISO 15362:1998. Light microscopes. Minimum requirements for stereo microscopes. Information provided to the user
BS 7011-1-1.1:1998, ISO 8036-1:1998 BS 7011-1-1.1:1998, ISO 8036-1:1998. Consumable accessories for light microscopes. Immersion oils. Specification for immersion oils for general use
BS ISO 13741-1:1998 BS ISO 13741-1:1998. Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-c
BS ISO 13741-2:1998 BS ISO 13741-2:1998. Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-c
BS ISO 1628-5:1998, BS 2782-7:Method 732E:1998 BS ISO 1628-5:1998, BS 2782-7:Method 732E:1998. Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Ther
BS EN 60238:1996 BS EN 60238:1996. Specification for Edison screw lampholders
BS EN 1413:1998 BS EN 1413:1998. Textiles. Determination of pH of aqueous extract
BS AU 50-1.5.5:1998, ISO 10499-2:1998 BS AU 50-1.5.5:1998, ISO 10499-2:1998. Tyres and wheels. Tyres. Industrial vehicle tyres. Specification for solid tyres (metric series) for pneumatic tyre rims. L
BS EN ISO 105-Z05:1998 BS EN ISO 105-Z05:1998. Textiles. Tests for colour fastness. Determination of the dusting behaviour of dyes
BS 1344-9:1998, ISO 2744:1998 BS 1344-9:1998, ISO 2744:1998. Methods of testing vitreous enamel finishes. Determination of resistance to boiling water and water vapour
BS EN ISO 9241-4:1998 BS EN ISO 9241-4:1998. Ergonomic requirements for office work with visual display terminals (VDTs). Keyboard requirements
BS EN ISO 13565-1:1998 BS EN ISO 13565-1:1998. Geometric Product Specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Filtering and general measurem
BS EN ISO 13565-2:1998 BS EN ISO 13565-2:1998. Geometric Product Specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Height characterization using
BS EN ISO 105-Z03:1998 BS EN ISO 105-Z03:1998. Textiles. Tests for colour fastness. Intercompatibility of basic dyes for acrylic fibres
98/121868DC 98/121868DC. Adhesives. Wood-to-wood adhesive bonds. Determination of shear strength by compressive loading (ISO/DIS 6238)
98/561114DC 98/561114DC. Caps made of aluminium-plastics combinations for infusion bottles and injection vials. Requirements and test methods (ISO/DIS 10985)
98/561115DC 98/561115DC. Infusion equipment for medical use. Part 7. Caps made of aluminium-plastics combinations for infusion bottles (ISO/DIS 8536-7). Part 7: Caps made of aluminium-plastics combina
98/561116DC 98/561116DC. Infusion equipment for medical use. Part 3. Aluminium caps for infusion bottles (ISO/DIS 8536-3). Part 3: Aluminium caps for infusion bottles
98/645146DC 98/645146DC. ISO/IEC ISP 10609-5/DAM 1. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service. Part 5. Definition of profiles TB1
98/645147DC 98/645147DC. ISO/IEC ISP 10609-8/DAM 1. Information technology. International standardized profiles TB, TC, TD and TE. Connection mode transport service over connection-mode network servic
98/645148DC 98/645148DC. ISO/IEC ISP 10609-6/DAM 1. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network servic
98/645149DC 98/645149DC. ISO/IEC ISP 10609-7/DAM 1. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network servic
98/645150DC 98/645150DC. ISO/IEC ISP 10609-12/DAM 1. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network servi
98/645151DC 98/645151DC. ISO/IEC ISP 10609-14/DAM 1. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network servi
98/645152DC 98/645152DC. ISO/IEC ISP 10609-15/DAM 1. Information technology. International standardized profiles TB, TC, TD and TE. Connection-mode transport service over connection-mode network servi
98/645153DC 98/645153DC. ISO/IEC ISP 10614-5/DAM 1. Information technology. International standardized profile RC. X.25 protocol. Part 5. Definition of profile RC51.1111, X.25 protocol relaying betwee
98/645154DC 98/645154DC. ISO/IEC ISP 10614-6/DAM 1. Information technology. International standardized profile RC - X.25 protocol relaying. Part 6. Definition of profile RC51.1121, X.25 protocol relay
98/645155DC 98/645155DC. ISO/IEC ISP 12067-4/DAM 1. Information technology. International standardized profile RB. Relaying the connection-mode network service. Part 4. Definition of profile RB51.1111
98/645156DC 98/645156DC. ISO/IEC ISP 12067-5/DAM 1. Information technology. International standardized profile RB. Relaying the connection-mode network service. Part 5. Definition of profile RB51.1121
98/706176DC 98/706176DC. Bolts, mushroom headed, slotted drive, unified thread aluminium alloys (BS 4A 170:1998)
98/706642DC 98/706642DC. Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore). Specifications (prEN 13195)
BS 1344-11:1998, ISO 2746:1998 BS 1344-11:1998, ISO 2746:1998. Methods of testing vitreous enamel finishes. High voltage test for enamelled articles for service under highly corrosive conditions
BS EN 1810:1998 BS EN 1810:1998. Body-piercing post assemblies. Reference test method for determination of nickel content by flame atomic absorption spectrometry
BS EN 1371-2:1998 BS EN 1371-2:1998. Founding. Liquid penetrant inspection. Investment castings
BS EN 12454:1998 BS EN 12454:1998. Founding. Visual examination of surface discontinuities. Steel sand castings
BS EN 1330-8:1998 BS EN 1330-8:1998. Non-destructive testing. Terminology. Terms used in leak tightness testing
PD 6623:1998 PD 6623:1998. PNO-ISC specification number 007. ISDN user part (ISUP)
BS EN ISO 3452-4:1999 BS EN ISO 3452-4:1999. Non-destructive testing. Penetrant testing. Equipment
BS EN ISO/IEC 11159:1998 BS EN ISO/IEC 11159:1998. Information technology. Office equipment. Minimum information to be included in specification sheets. Copying machines
BS ISO/IEC 10036:1996 BS ISO/IEC 10036:1996. Information technology. Font information interchange. Procedures for registration of font-related identifiers
BS EN ISO 2739:1998 BS EN ISO 2739:1998. Sintered metal bushes. Determination of radial crushing strength
BS EN 12421:1998 BS EN 12421:1998. Magnesium and magnesium alloys. Unalloyed magnesium
BS EN 12438:1998 BS EN 12438:1998. Magnesium and magnesium alloys. Magnesium alloys for cast anodes
BS EN 10139:1998 BS EN 10139:1998. Cold rolled uncoated mild steel narrow strip for cold forming. Technical delivery conditions
DD 239:1998 DD 239:1998. Recommendations for the preservation of timber
BS EN 130500:1998 BS EN 130500:1998. Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct cu
BS EN 130501:1998 BS EN 130501:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct
BS EN 130502:1998 BS EN 130502:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct
BS EN 133100:1998 BS EN 133100:1998. Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression. Filte
BS EN 133101:1998 BS EN 133101:1998. Harmonized system of quality assessment for electronic components. Blank detail specification:passive filter units for electromagnetic interference suppression. Fi
BS EN 130202:1998 BS EN 130202:1998. Harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with non-solid electrolyte, porous anode (
DD ENV 13093:1998 DD ENV 13093:1998. Public transport. Road vehicles. Driver's console mechanical interface requirements. Minimum display and keypad parameters
DD ENV 12313-1:1998 DD ENV 12313-1:1998. Traffic and traveller information (TTI). TTI messages via traffic message coding. Coding protocol for Radio data system. Traffic message channel (RDS-TMC) (RDS
DD ENV 13106-1:1998 DD ENV 13106-1:1998. Road transport and traffic telematics. Traffic and travel data dictionary. General definitions, entities, attributes
BS EN 1303:1998 BS EN 1303:1998. Building hardware. Cylinders for locks. Requirements and test methods
98/706424 DC 98/706424 DC. prEN 81-11. Safety rules for the construction and installation of lifts. Part 11. New lifts in existing buildings
BS ISO 14848:1998 BS ISO 14848:1998. Plastics. Unsaturated-polyester resins. Determination of reactivity at 130°C
BS ISO 844:1998 BS ISO 844:1998. Cellular plastics. Compression test for rigid materials. Specification
BS EN 12277:1998 BS EN 12277:1998. Mountaineering equipment. Harnesses. Safety requirements and test methods
BS EN 12278:1998 BS EN 12278:1998. Mountaineering equipment. Pulleys. Safety requirements and test methods
DD ENV 1007-5:1998 DD ENV 1007-5:1998. Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of distribution of tensile strength and tensile strain to fail
DD ENV 12788:1998 DD ENV 12788:1998. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of flexural strength
DD ENV 12789:1998 DD ENV 12789:1998. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure. Determination of flexural strength
BS EN ISO 9999:1998 BS EN ISO 9999:1998. Technical aids for disabled persons. Classification
WD/HB10146 : 1998 WD/HB10146 : 1998. Countdown to 2000. A guide to the legal issues
BS 559:1998 BS 559:1998. Specification for design, construction and installation of signs
98/707273DC 98/707273DC. Ventilation for buildings. Instrumentation requirements for air velocity measurements in ventilated spaces (prEN 13182)
98/201767DC 98/201767DC. IEC 60335-2-6, ED. 4. Part 2-6. Particular requirements for cooking ranges, hobs, ovens and similar appliances, subclauses 7, 19 and 22. Particular requirements for cooking ra
BS EN ISO 3452-3:1999 BS EN ISO 3452-3:1999. Non-destructive testing. Penetrant testing. Reference test blocks
BS EN 12575:1998 BS EN 12575:1998. Plastics. Thermoset moulding compounds. Determination of the degree of fibre wet out in SMC
BS EN 12576:1998 BS EN 12576:1998. Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC
BS EN 60265-1:1998, IEC 60265-1:1998 BS EN 60265-1:1998, IEC 60265-1:1998. Specification for high-voltage switches. Switches for rated voltages above 1 kV and less than 52 kV
BS EN 60646:1999 BS EN 60646:1999. Test methods for crucible induction furnaces
BS EN 61436:1998, IEC 61436:1998 BS EN 61436:1998, IEC 61436:1998. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride rechargeable single cel
BS EN ISO 2286-1:1998 BS EN ISO 2286-1:1998. Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of length, width and net mass
BS EN ISO 2286-2:1998 BS EN ISO 2286-2:1998. Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of total mass per unit area, mass per unit area of coa
BS EN ISO 2286-3:1998 BS EN ISO 2286-3:1998. Rubber- or plastics-coated fabrics. Determination of roll characteristics. Method for determination of thickness
BS 1344-17:1998, ISO 2745:1998 BS 1344-17:1998, ISO 2745:1998. Methods of testing vitreous enamel finishes. Resistance to hot sodium hydroxide solution
98/122131DC 98/122131DC. Road vehicles. Labelling of containers for petroleum based and non-petroleum based brake fluid (ISO/CD 3871)
BS EN ISO 7944:1998 BS EN ISO 7944:1998. Optics and optical instruments. Reference wavelengths
BS EN 10048:1997 BS EN 10048:1997. Hot rolled narrow steel strip. Tolerances on dimensions and shape
BS EN ISO 13918:1998 BS EN ISO 13918:1998. Welding. Studs and ceramic ferrules for arc stud welding
BS EN 60454-3-2:1998, IEC 60454-3-2:1998 BS EN 60454-3-2:1998, IEC 60454-3-2:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials
DD ENV 50208-6:1998 DD ENV 50208-6:1998. Data interchange format for simulated and measured data (ISMD)
BS 7816-3:1998, IEC 61244-3:1998 BS 7816-3:1998, IEC 61244-3:1998. Determination of long-term radiation ageing in polymers. Procedures for in-service monitoring of low-voltage cable materials
BS EN 130300:1998 BS EN 130300:1998. Harmonized system of quality assessment for electronic components. Sectional specification:aluminium electrolytic capacitors with solid and non-solid electrolyte
BS IEC 60050-807:1998 BS IEC 60050-807:1998. International electrotechnical vocabulary. Digital recording of audio and video signals
98/707587DC 98/707587DC. Food processing machinery. Vegetable peelers. Safety and hygiene requirements (prEN 13208)
98/707306DC 98/707306DC. Aerospace series. Rivets, solid, in nickel alloy. Procurement specification (ISO/CD 1228)
98/707307DC 98/707307DC. Aerospace series. Rivets, solid, in titanium alloy. Procurement specification (ISO/CD 12290)
98/122128DC 98/122128DC. Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48/DAM 1)
98/122135DC 98/122135DC. Plastics. Determination of physical dimensions of solid plastic specimens (ISO/CD 16012)
PD 6612:1997 PD 6612:1997. Guidance on the preparation of codes of practice for building
BS EN ISO 3651-1:1998 BS EN ISO 3651-1:1998. Determination of resistance to intergranular corrosion of stainless steels. Austenitic and ferritic-austenitic (duplex) stainless steels. Corrosion test in
BS EN ISO 3651-2:1998 BS EN ISO 3651-2:1998. Determination of resistance to intergranular corrosion of stainless steels. Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels. Corrosi
BS ISO 10972-1:1998 BS ISO 10972-1:1998. Cranes. Requirements for mechanisms. General
BS ISO 8566-4:1998 BS ISO 8566-4:1998. Cranes. Cabins. Jib cranes
WD/HB10148 WD/HB10148. Commentary on BS 7671:1992, Requirements for Electrical Installations. IEE Wiring Regulations
BS EN 1518:1998 BS EN 1518:1998. Non-destructive testing. Leak testing. Characterization of mass spectrometer leak detectors
BS EN 12014-7:1998 BS EN 12014-7:1998. Foodstuffs. Determination of nitrate and/or nitrite content. Continuous flow method for the determination of nitrate content of vegetables and vegetable products
BS EN ISO 11216:1998 BS EN ISO 11216:1998. Modified starch. Determination of content of carboxymethyl groups in carboxymethyl starch
BS 5268-3:1998 BS 5268-3:1998. Structural use of timber. Code of practice for trussed rafter roofs
BS 148:1998 BS 148:1998. Specification for unused and reclaimed mineral insulating oils for transformers and switchgear
Video "Profiting from the environment" Video "Profiting from the environment".
98/122154DC 98/122154DC. Technical report ISO/DTR 11856. Textile floor coverings. Test methods for determination of fibre bind
WD/HB10004 WD/HB10004. Newnes Mechanical Engineer's Pocket Book
DD ENV 13154-2:1998 DD ENV 13154-2:1998. Data communication for HVAC application field net. Protocols
BSISO12640 : 1997 (R03) BSISO12640 : 1997 (R03).
BS ISO 11800:1998 BS ISO 11800:1998. Information and documentation. Requirements for binding materials and methods used in the manufacture of books
BS EN 1923:1998 BS EN 1923:1998. European character repertoires and their coding. 8-bit single-byte coding
BS EN 844-10:1998 BS EN 844-10:1998. Round and sawn timber. Terminology. Terms relating to stain and fungal attack
BS EN 844-11:1998 BS EN 844-11:1998. Round and sawn timber. Terminology. Terms relating to degrade by insects
BS EN 755-2:1997 BS EN 755-2:1997. Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties
BS EN ISO 8618:1998, BS 2782-4:Method 451M:1998 BS EN ISO 8618:1998, BS 2782-4:Method 451M:1998. Plastics. Liquid phenolic resins. Conventional determination of non-volatile matter
BS EN ISO 8619:1998, BS 2782-8:Method 835H:1998 BS EN ISO 8619:1998, BS 2782-8:Method 835H:1998. Plastics. Phenolic resin powder. Determination of flow distance on a heated glass plate
BS EN 60454-3-8:1998, IEC 60454-3-8:1998 BS EN 60454-3-8:1998, IEC 60454-3-8:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials
BS EN 60454-3-9:1998, IEC 60454-3-9:1998 BS EN 60454-3-9:1998, IEC 60454-3-9:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials
BS EN 60454-3-11:1998, IEC 60454-3-11:1998 BS EN 60454-3-11:1998, IEC 60454-3-11:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual mater
BS EN 60454-3-12:1998, IEC 60454-3-12:1998 BS EN 60454-3-12:1998, IEC 60454-3-12:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual mater
BS EN 60454-3-4:1998, IEC 60454-3-4:1998 BS EN 60454-3-4:1998, IEC 60454-3-4:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials
BS EN 60454-3-5:1998, IEC 60454-3-5:1998 BS EN 60454-3-5:1998, IEC 60454-3-5:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials
BS EN 60454-3-6:1998, IEC 60454-3-6:1998 BS EN 60454-3-6:1998, IEC 60454-3-6:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials
BS EN 60454-3-7:1998, IEC 60454-3-7:1998 BS EN 60454-3-7:1998, IEC 60454-3-7:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials
BS EN 12128:1998 BS EN 12128:1998. Biotechnology. Laboratories for research, development and analysis. Containment levels of microbiology laboratories, areas of risk, localities and physical safety re
BS EN 12296:1998 BS EN 12296:1998. Biotechnology. Equipment. Guidance on testing procedures for cleanability
BS EN 12297:1998 BS EN 12297:1998. Biotechnology. Equipment. Guidance on testing procedures for sterilizability
BS EN 12298:1998 BS EN 12298:1998. Biotechnology. Equipment. Guidance on testing procedures for leaktightness
PD 6630:1998, CR 13217:1998 PD 6630:1998, CR 13217:1998. Nomenclature system for medical devices for the purpose of regulatory data exchange. Rationale
BS EN ISO 13370:1998 BS EN ISO 13370:1998. Thermal performance of buildings. Heat transfer via the ground. Calculation methods
BS EN 60695-1-1:1996, IEC 60695-1-1:1995 BS EN 60695-1-1:1996, IEC 60695-1-1:1995. Fire hazard testing. Guidance for assessing fire hazard of electrotechnical products. General guidance
BS EN 12308:1998 BS EN 12308:1998. Installations and equipment for LNG. Suitability testing of gaskets designed for flanged joints used on LNG piping
98/202052DC 98/202052DC. IEC 60335-2-8. Ed. 4. Safety of household and similar electrical appliances. Part 2-8. Particular requirements for electric shavers, hair clippers and similar appliances (61/1
98/202051DC 98/202051DC. IEC 60335-2-14:Ed. 3. Safety of household and similar electrical appliances. Part 2. Particular requirements for kitchen machines (61/1456/CD). Particular requirements for ele
98/202066DC 98/202066DC. IEC 60044-2. Voltage transformers. Measurement of radio interference voltage (R.I.V.). Inductive Voltage transformers
BS 4756:1998 BS 4756:1998. Specification for ready-mixed aluminium priming paints for woodwork
KIT 50 KIT 50. Information security guidance kit
BS ISO/IEC 14478-1:1998 BS ISO/IEC 14478-1:1998. Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO). Fundamentals of PREMO
BS ISO/IEC 14478-2:1998 BS ISO/IEC 14478-2:1998. Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO). Foundation component
BS ISO/IEC 14478-3:1998 BS ISO/IEC 14478-3:1998. Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO). Multimedia systems services
BS ISO/IEC 14478-4:1998 BS ISO/IEC 14478-4:1998. Information technology. Computer graphics and image processing. Presentation environment for multimedia objects (PREMO). Modelling, rendering and inter
BS ISO 8543:1998 BS ISO 8543:1998. Textile floor coverings. Methods for determination of mass
BS EN 692:1997 BS EN 692:1997. Mechanical presses. Safety
BS 4483:1998 BS 4483:1998. Steel fabric for the reinforcement of concrete
BS EN ISO 7371:1996 BS EN ISO 7371:1996. Household refrigerating appliances. Refrigerators with or without low temperature compartment. Characteristics and test methods
BS 7854-3:1998, ISO 10816-3:1998 BS 7854-3:1998, ISO 10816-3:1998. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Industrial machines with nominal power a
BS 7854-4:1998, ISO 10816-4:1998 BS 7854-4:1998, ISO 10816-4:1998. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Gas turbine driven sets excluding aircra
BS ISO 10791-4:1998 BS ISO 10791-4:1998. Test conditions for machining centres. Accuracy and repeatability of positioning of linear and rotary axes
98/231051DC 98/231051DC. IEC 61260:1995. Electroacoustics. Octave-band and fractional-octave-bank filters. Electromagnetic and electrostatic compatibility requirements and test procedures (IEC DOCUMEN
BS EN ISO 1421:1998 BS EN ISO 1421:1998. Rubber-or plastics-coated fabrics. Determination of tensile strength and elongation at break
BS EN 1097-3:1998 BS EN 1097-3:1998. Tests for mechanical and physical properties of aggregates. Determination of loose bulk density and voids
98/122471DC 98/122471DC. Plastics. Determination of caprolactam and its cyclic and linear oligomers by HPLC. ISO/DIS 15033
98/541375DC 98/541375DC. Protective helmets. Test methods. Part 8. Electrical properties (prEN 13087-8). Part 8: Electrical properties
98/261629DC 98/261629DC. IEC 60721-4-3. Technical report type 3. Edition 1.0. Classification of environmental conditions. Part 4-3. Guidance for the correlation and transformation of the environmental
98/122295DC 98/122295DC. Petroleum and liquid petroleum products. Determination of volume, density and mass of the contents of vertical cylindrical tanks by hybrid tank measurement systems (ISO/CD 151
BS ISO 13592:1998 BS ISO 13592:1998. Small craft. Backfire flame control for petrol engines
BS Z 10:1998, ISO 15395:1998 BS Z 10:1998, ISO 15395:1998. Space data and information transfer systems. Standard formatted data units. Control Authority data structures
BS EN 752-6:1998 BS EN 752-6:1998. Drain and sewer systems outside buildings. Pumping installations
DD ENV 12014-4:1998 DD ENV 12014-4:1998. Foodstuffs. Determination of nitrate and/or nitrite content. Ion-exchange chromatographic (IC) method for the determination of nitrate and nitrite content of m
DD ENV 12014-3:1998 DD ENV 12014-3:1998. Foodstuffs. Determination of nitrate and/or nitrite content. Spectrometric determination of nitrate and nitrite content of meat products after enzymatic reduct
BS EN 12346:1999 BS EN 12346:1999. Gymnastic equipment. Wall bars, lattice ladders and climbing frames. Safety requirements and test methods
BS EN 957-8:1998 BS EN 957-8:1998. Stationary training equipment. Steppers, stairclimbers and climbers. Additional specific safety requirements and test methods
BS EN 957-7:1999 BS EN 957-7:1999. Stationary training equipment. Rowing machines, additional specific safety requirements and test methods
BS EN ISO 8561:1996 BS EN ISO 8561:1996. Household refrigerating appliances. Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by forced air circulation. Char
BS EN 12015:1998 BS EN 12015:1998. Electromagnetic compatibility. Product family standard for lifts, escalators and passenger conveyors. Emission
BS EN 12016:1998 BS EN 12016:1998. Electromagnetic compatibility. Product family standard for lifts, escalators and passenger conveyors. Immunity
BS EN 60601-2-23:1998, BS 5724-2.123:1996,IEC 60601-2-23:1993 BS EN 60601-2-23:1998, BS 5724-2.123:1996,IEC 60601-2-23:1993. Medical electrical equipment. Particular requirements for the safety of tra
BS EN 1737:1998 BS EN 1737:1998. Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggrega
BS EN 1738:1998 BS EN 1738:1998. Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete
BS EN 1317-1:1998 BS EN 1317-1:1998. Road restraint systems. Terminology and general criteria for test methods
BS ISO 7198:1998 BS ISO 7198:1998. Cardiovascular implants. Tubular vascular prostheses
BS 6043-2.16:1998, ISO 11412:1998 BS 6043-2.16:1998, ISO 11412:1998. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of water conte
BS EN 45510-6-1:1998 BS EN 45510-6-1:1998. Guide for the procurement of power station equipment. Turbine auxiliaries. Deaerators
98/708312DC 98/708312DC. ISO/DIS 10464. Gas cylinders. Refillable welded steel cylinders for LPG. Periodic requalification
98/708298DC 98/708298DC. ISO/DIS 4223-1. Definitions of some terms used in the tyre industry. Part 1. Pneumatic tyres. Pneumatic tyres
BS EN 60875-1:1998, IEC 60875-1:1996,QC 810000:1996 BS EN 60875-1:1998, IEC 60875-1:1996,QC 810000:1996. Fibre optic branching devices. Generic specification
BS EN 60875-1-1:1998, IEC 60875-1-1:1996,QC 810001:1996 BS EN 60875-1-1:1998, IEC 60875-1-1:1996,QC 810001:1996. Fibre optic branching devices. Blank detail specification
BS ISO TR 3313:1998 BS ISO TR 3313:1998. Measurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on flow-measurement instruments
BS ISO TR 15377:1998 BS ISO TR 15377:1998. Measurement of fluid flow by means of pressure differential devices. Guidelines for specification of nozzles and orifice plates beyond the scope of ISO 5167-
BS ISO 14180:1998 BS ISO 14180:1998. Solid mineral fuels. Guidance on the sampling of coal seams
BS EN 61300-3-21:1998, IEC 61300-3-21:1998 BS EN 61300-3-21:1998, IEC 61300-3-21:1998. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations a
BS EN 61300-3-40:1998, IEC 61300-3-40:1998 BS EN 61300-3-40:1998, IEC 61300-3-40:1998. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations a
BS EN 1770:1998 BS EN 1770:1998. Products and systems for the protection and repair of concrete structures. Test methods. Determination of the coefficient of thermal expansion
BS ISO 9022-10:1998 BS ISO 9022-10:1998. Optics and optical instruments. Environmental test methods. Combined sinusoidal vibration and dry heat or cold
BS ISO 4619:1998 BS ISO 4619:1998. Driers for paints and varnishes
BS ISO 11994:1997 BS ISO 11994:1997. Cranes. Availability. Vocabulary
BS ISO 11630:1997 BS ISO 11630:1997. Cranes. Measurement of wheel alignment
BS ISO 12478-1:1998 BS ISO 12478-1:1998. Cranes. Maintenance manual. General
BS EN 1861:1998 BS EN 1861:1998. Refrigerating systems and heat pumps. System flow diagrams and piping and instrument diagrams. Layout and symbols
BS EN 2644:1998 BS EN 2644:1998. Rod assemblies for flight controls. Technical specification
98/122587DC 98/122587DC. Rubber- or plastics-coated fabrics. Determination of resistance to penetration by water (ISO/CD 1420)
98/122588DC 98/122588DC. BS ISO 7617-3. Plastics-coated fabrics for upholstery. Part 3. Specification for polyurethane-coated woven fabrics (ISO/CD 7617-3). Part 3: Specification for polyurethane-coat
98/122589DC 98/122589DC. BS ISO 8096-3. Rubber- or plastics-coated fabrics for water-resistant clothing. Specification. Part 3. Natural rubber- and synthetic rubber-coated fabrics (ISO/CD 8096-3). Par
BS EN 4105:1998 BS EN 4105:1998. Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Tape
BS EN 3948:1998 BS EN 3948:1998. Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Wire
BS EN 3947:1998 BS EN 3947:1998. Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Rolled foil
BS EN 3944:1998 BS EN 3944:1998. Nickel base alloy NI-B41204 (NiCr13Si4B3). Filler metal for brazing. Tape
BS EN 3940:1998 BS EN 3940:1998. Nickel base alloy NI-B46001 (NiCo20Si5B3). Filler metal for brazing. Tape
BS EN 3931:1998 BS EN 3931:1998. Nickel base alloy NI-B31001 (NiCr19Si10). Filler metal for brazing. Tape
BS EN 3928:1998 BS EN 3928:1998. Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Tape
BS EN 3924:1998 BS EN 3924:1998. Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Tape
BS EN 3922:1998 BS EN 3922:1998. Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Borided foil
BS EN 3919:1998 BS EN 3919:1998. Nickel base alloy NI-B41202 (NiCr14Si5B3). Filler metal for brazing. Amorphous foil
BS EN 3918:1998 BS EN 3918:1998. Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Tape
BS EN 3207:1998 BS EN 3207:1998. Rubber compounds. Technical specification
BS EN 3917:1998 BS EN 3917:1998. Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Powder or paste
BS EN 60454-3-3:1998, IEC 60454-3-3:1998 BS EN 60454-3-3:1998, IEC 60454-3-3:1998. Specifications for pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials
BS EN 61395:1998, IEC 61395:1998 BS EN 61395:1998, IEC 61395:1998. Overhead electrical conductors. Creep test procedures for stranded conductors
BS EN 186170:1998 BS EN 186170:1998. Harmonized system of quality assessment for electronic components. Sectional specification:connector sets for optical fibres and cables. Type RCC
BS EN 61300-2-41:1998, IEC 61300-2-41:1998 BS EN 61300-2-41:1998, IEC 61300-2-41:1998. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Screen
BS EN 61751:1998, IEC 61751:1998 BS EN 61751:1998, IEC 61751:1998. Laser modules used for telecommunication. Reliability assessment
BS EN 1740:1998 BS EN 1740:1998. Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly
BS EN 1741:1998 BS EN 1741:1998. Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concret
BS EN 1742:1998 BS EN 1742:1998. Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open struc
BS 4363:1998 BS 4363:1998. Specification for distribution assemblies for reduced low voltage electricity supplies for construction and building sites
BS EN ISO 6877:1998 BS EN ISO 6877:1998. Dental root-canal obturating points
98/122511DC 98/122511DC. ISO/DIS 15875-7. Plastics piping systems for hot and cold water. Crosslinked polyethylene (PE-X). Part 7. Assessment of conformity. Part 7 : Assessment of conformity
98/122516DC 98/122516DC. ISO/DIS 15876-7. Plastics piping systems for hot and cold water. Polybutylene (PB). Part 7. Assessment of conformity. Part 7 : Assessment of conformity
98/122521DC 98/122521DC. ISO/DIS 15877-7. Plastics piping systems for hot and cold water. Chlorinated poly(vinyl chloride) (PVC-C). Part 7. Assessment of conformity. Part 7 : Assessment of conformity
98/541500DC 98/541500DC. Industrial safety helmets
BS EN 920:1998 BS EN 920:1998. Paper and board intended to come into contact with foodstuffs. Determination of dry matter content in an aqueous extract
BS EN 1541:1998 BS EN 1541:1998. Paper and board intended to come into contact with foodstuffs. Determination of formaldehyde in an aqueous extract
BS EN 539-2:1998 BS EN 539-2:1998. Clay roofing tiles for discontinuous laying. Determination of physical characteristics. Test for frost resistance
BS EN 410:1998 BS EN 410:1998. Glass in building. Determination of luminous and solar characteristics of glazing
BS EN 2942:1998 BS EN 2942:1998. Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated
BS EN 2944:1998 BS EN 2944:1998. Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
BS EN 2945:1998 BS EN 2945:1998. Inserts, screw thread, helical coil, self-locking. Assembly procedure
BS EN 3008:1998 BS EN 3008:1998. Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification:1275 MPa (at ambient temperature)/650°C
BS EN 3009:1998 BS EN 3009:1998. Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification. 1275 MPa (at ambient temp
BS EN 3010:1998 BS EN 3010:1998. Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730°C
BS EN 3011:1998 BS EN 3011:1998. Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification:1210 MPa (at ambient temperat
BS EN 3044:1998 BS EN 3044:1998. Installation holes for inserts, screw thread, helical coil, self-locking. Design standard
BS EN 3542:1998 BS EN 3542:1998. Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750)
BS ISO 6751:1998 BS ISO 6751:1998. Tools for moulding. Ejector pins with cylindrical head
BS ISO 6753-2:1998 BS ISO 6753-2:1998. Tools for pressing and moulding. Machined plates. Machined plates for moulds
BS ISO 8694:1998 BS ISO 8694:1998. Tools for moulding. Shouldered ejector pins
BS ISO 11415:1997 BS ISO 11415:1997. Tools for pressing. Die sets
BS EN ISO 13090-1:1998 BS EN ISO 13090-1:1998. Mechanical vibration and shock. Guidance on safety aspects of tests and experiments with people. Exposure to whole-body mechanical vibration and repeated
PD 6631:1998 PD 6631:1998. Technical guide to ISO/IEC 13522-5:1997. Information technology. Coding of multimedia and hypermedia information. Support for base-level interactive applications (MHEG-5)
BS IEC 61428:1998 BS IEC 61428:1998. Nuclear instrumentation. Sample containers for gamma-ray spectrometry with Ge-detectors
BS ISO/IEC 8802-2:1998 BS ISO/IEC 8802-2:1998. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Logical
BSI Shade gauge BSI Shade gauge. Methods of measuring the performance of household electrical appliances. Methods of measuring the performance of household electrical appliances. Shade gauge for the a
98/708732DC 98/708732DC. Aerospace series. Rivets, solid. Test methods (ISO/CD 17057)
98/541527DC 98/541527DC. Respiratory protective devices. Self-contained closed-circuit breathing apparatus, compressed oxygen or compressed oxygen-nitrogen type. Requirements, testing, marking
BS 7926:1998 BS 7926:1998. Quantitative micrographic methods to determine the percentage content of non-metallic inclusions in cast steel
BS 7925-1:1998 BS 7925-1:1998. Software testing. Vocabulary
BS 7925-2:1998 BS 7925-2:1998. Software testing. Software component testing
BS EN 1254-5:1998 BS EN 1254-5:1998. Copper and copper alloys. Plumbing fittings. Fittings with short ends for capillary brazing to copper tubes
BS EN 1254-1:1998 BS EN 1254-1:1998. Copper and copper alloys. Plumbing fittings. Fittings with ends for capillary soldering or capillary brazing to copper tubes
BS EN 12462:1998 BS EN 12462:1998. Biotechnology. Performance criteria for pumps
BS EN 12682:1998 BS EN 12682:1998. Biotechnology. Modified organisms for application in the environment. Guidance for the characterization of the genetically modified organism by analysis of the funct
BS EN 12683:1998 BS EN 12683:1998. Biotechnology. Modified organisms for application in the environment. Guidance for the characterization of the genetically modified organism by analysis of the molec
BS EN 12685:1998 BS EN 12685:1998. Biotechnology. Modified organisms for application in the environment. Guidance for the monitoring strategies for deliberate release of genetically modified micro-org
BS EN 12686:1998 BS EN 12686:1998. Biotechnology. Modified organisms for application in the environment. Guidance for the sampling strategies for deliberate releases of genetically modified micro-orga
BS EN 12687:1998 BS EN 12687:1998. Biotechnology. Modified organisms for application in the environment. Guidance for the characterization of the genetically modified organism by analysis of the genom
BS EN 12689:1998 BS EN 12689:1998. Biotechnology. Guidance on assessment of the purity, biological activity and stability of micro-organism based products
PD 6632:1998, CR 12739:1998 PD 6632:1998, CR 12739:1998. Biotechnology. Laboratories for research, development and analysis. Guidance on the selection of equipment needed for biotechnology laboratorie
BS EN 61400-12:1998, IEC 61400-12:1998 BS EN 61400-12:1998, IEC 61400-12:1998. Wind turbine generator systems. Wind turbine power performance testing
BS EN 1017:1998 BS EN 1017:1998. Chemicals used for treatment of water intended for human consumption. Half-burnt dolomite
BS EN 1018:1998 BS EN 1018:1998. Chemicals used for treatment of water intended for human consumption. Calcium carbonate
BS EN 1405:1998 BS EN 1405:1998. Chemicals used for treatment of water intended for human consumption. Sodium alginate
BS EN 1406:1998 BS EN 1406:1998. Chemicals used for treatment of water intended for human consumption. Modified starches
BS EN 1407:1998 BS EN 1407:1998. Chemicals used for treatment of water intended for human consumption. Anionic and non-ionic polyacrylamides
BS EN 1408:1998 BS EN 1408:1998. Chemicals used for treatment of water intended for human consumption. Poly(diallyldimethylammonium chloride)
BS EN 1409:1998 BS EN 1409:1998. Chemicals used for treatment of water intended for human consumption. Polyamines
BS EN 1410:1998 BS EN 1410:1998. Chemicals used for treatment of water intended for human consumption. Cationic polyacrylamides
98/122849DC 98/122849DC. ISO/DIS 836. Refractories. Vocabulary
98/202315DC 98/202315DC. IEC 60335-2-11 Ed. 4. Particular requirements for tumble dryers. Amendment to sub-clause 19.102 concerning bare heating elements (IEC Document 61/1459/CD). Particular requirem
BS EN ISO 5165:1998, BS 2000-41:1998,ISO 5165:1998 BS EN ISO 5165:1998, BS 2000-41:1998,ISO 5165:1998. Petroleum products. Determination of the ignition quality of diesel fuels. Cetane engine method
BS EN 116:1998, BS 2000-309:1998 BS EN 116:1998, BS 2000-309:1998. Diesel and domestic heating fuels. Determination of cold filter plugging point
BS EN ISO 6246:1998, BS 2000-131:1998,ISO 6246:1995 BS EN ISO 6246:1998, BS 2000-131:1998,ISO 6246:1995. Petroleum products. Gum content of light and middle distillate fuels. Jet evaporation method
BS EN ISO 13736:1998, BS 2000-170:1998 BS EN ISO 13736:1998, BS 2000-170:1998. Petroleum products and other liquids. Determination of flash point. Abel closed cup method
BS EN 521:1998 BS EN 521:1998. Specification for dedicated liquefied petroleum gas appliances. Portable vapour pressure liquefied petroleum gas appliances
BS N 6:1998 BS N 6:1998. Specification for aeromedical portable oxygen concentrator systems. General requirements
BS 4001-1:1998 BS 4001-1:1998. Care and maintenance of underwater breathing apparatus. Recommendations for the compressed air open circuit type
BS CECC 200025:1998 BS CECC 200025:1998. Harmonized system of quality assessment for electronic components. Process assessment schedule: printed board assembly facilities
BS EN 60601-2-24:1998, BS 5724-2.124:1998,IEC 60601-2-24:1998 BS EN 60601-2-24:1998, BS 5724-2.124:1998,IEC 60601-2-24:1998. Medical electrical equipment. Particular requirements for safety. Particula
BS EN ISO 14982:1998 BS EN ISO 14982:1998. Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria
BS ISO 15469:1997 BS ISO 15469:1997. Spatial distribution of daylight. CIE standard overcast sky and clear sky
BS ISO 1122-1:1998 BS ISO 1122-1:1998. Vocabulary of gear terms. Definitions related to geometry
BS A 327:1998, ISO 13589:1998 BS A 327:1998, ISO 13589:1998. Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1100 MPa (at ambient temperature)/425°C, 1100 MPa (at am
BS 2A 294:1998, ISO 7403:1998 BS 2A 294:1998, ISO 7403:1998. Spline drives. Wrenching configuration. Metric series
BS A 325:1998, ISO 245:1998 BS A 325:1998, ISO 245:1998. Lockwire. Diameters
BS A 326:1998, ISO 3230:1998 BS A 326:1998, ISO 3230:1998. Rivets, solid, 100° normal countersunk head with dome, metallic material, with or without surface treatment. Dimensions
BS EN ISO 10673:1999 BS EN ISO 10673:1999. Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A
BS Z 11:1998, ISO 15396:1998 BS Z 11:1998, ISO 15396:1998. Space data and information transfer systems. Cross support reference model. Space link extension services
BS ISO 15:1998 BS ISO 15:1998. Rolling bearings. Radial bearings. Boundary dimensions, general plan
BS EN 153000:1998 BS EN 153000:1998. Harmonized system of quality assessment for electronic components. Generic specification: discrete pressure contact power semiconductor devices (qualification appr
BS ISO 7278-3:1998, ISO 7278-3:1998 BS ISO 7278-3:1998, ISO 7278-3:1998. Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters. Pulse interpolation techniques
BS 684-1.17:1998, ISO 15267:1998 BS 684-1.17:1998, ISO 15267:1998. Methods of analysis of fats and fatty oils. Physical methods. Flashpoint limit test using Pensky-Martens closed-cup flash tester
98/541608DC 98/541608DC. Ergonomic requirements for office work with visual display terminals (VDTs). Part 9. Requirements for non-keyboard input devices (prEN ISO 9241-9). Part 9: Requirements for no
98/654079DC 98/654079DC. ISO/IEC FCD 13818-10. Information technology. Generic coding of moving pictures and associated audio information. Part 10. Conformance extensions for digital storage media com
98/708827DC 98/708827DC. Aerospace series. Primary active lithium battery. Aircraft use. Technical specification (prEN 4240)
BS ISO 1985:1998 BS ISO 1985:1998. Machine tools. Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table. Testing of the accuracy
98/261911DC 98/261911DC. IEC 60068-2-28. Edition 4.0. Environmental testing. Part 2-28. Tests. Guidance for damp heat tests (IEC/104/71/CD). Tests. Guidance for damp heat tests
BS ISO 8548-4:1998 BS ISO 8548-4:1998. Prosthetics and orthotics. Limb deficiencies. Description of causal conditions leading to amputation
BS EN 61069-6:1998, IEC 61069-6:1998 BS EN 61069-6:1998, IEC 61069-6:1998. Industrial-process measurement and control. Evaluation of system properties for the purpose of system assessment. Assessment
BS IEC 60874-10-3:1997, QC 910003XX0003:1997 BS IEC 60874-10-3:1997, QC 910003XX0003:1997. Connectors for optical fibres and cables. Detail specification for fibre optic adaptor type BFOC/2,5 for sing
BS IEC 60874-14-1:1997, QC 910004XX0001:1997 BS IEC 60874-14-1:1997, QC 910004XX0001:1997. Connectors for optical fibres and cables. Detail specification for fibre optic connector type SC-PC standard
BS 4553-1:1998 BS 4553-1:1998.
BS 4553-2:1998 BS 4553-2:1998.
BS 4553-3:1998 BS 4553-3:1998.
BS 3900-J3:1998, ISO 8130-6:1992 and Amd1:1998 BS 3900-J3:1998, ISO 8130-6:1992 and Amd1:1998. Methods of test for paints. Testing of coating powders. Determination of gel time of coating powders
BS EN 60794-3:1998, IEC 60794-3:1998 BS EN 60794-3:1998, IEC 60794-3:1998. Optical fibre cables. Duct, buried and aerial cables. Sectional specification
BS EN 61360-2:1998, IEC 61360-2:1998 BS EN 61360-2:1998, IEC 61360-2:1998. Standard data element types with associated classification scheme for electric components. EXPRESS dictionary schema
BS IEC 61314-1-1:1996, IEC 61314-1-1:1996,QC 880001:1996 BS IEC 61314-1-1:1996, IEC 61314-1-1:1996,QC 880001:1996. Fibre optic fan-outs. Blank detail specification. Environmental categories 1, 2, 3, 5
BS EN 60143-3:1998, IEC 60143-3:1998 BS EN 60143-3:1998, IEC 60143-3:1998. Series capacitors for power systems. Internal fuses
BS EN 61557-6:1998, IEC 61557-6:1997 BS EN 61557-6:1998, IEC 61557-6:1997. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or m
BS ISO TR 12767:1998 BS ISO TR 12767:1998. Measurement of fluid flow by means of pressure-differential devices. Guidelines to the effect of departure from the specifications and operating conditions g
BS ISO 15166-1:1998 BS ISO 15166-1:1998. Adhesives. Methods of preparing bulk specimens. Two-part systems
98/202493DC 98/202493DC. IEC 61892-5. Mobile and fixed offshore units. Electrical installations. Part 5. Mobile units (IEC document 18/846/CD). Mobile units
98/122960DC 98/122960DC. Textile floor coverings. Assessment of changes in appearance (ISO/DIS 9405)
98/122962DC 98/122962DC. Textile floor coverings. Determination of size, squareness and straightness of edge tiles (ISO/DIS 13747)
98/122963DC 98/122963DC. Textile floor coverings. Determination of resistance to staining (ISO/DIS 13750)
98/541656DC 98/541656DC. Protective helmets. Test methods. Part 9. Mechanical rigidity (prEN 13087-9). Part 9: Mechanical rigidity
98/541667DC 98/541667DC. prEN 13238. Reaction to fire tests for building products. Conditioning procedures and general rules for selection of substrates
BS 7889:1997 BS 7889:1997.
BS EN ISO 15141-1:1998 BS EN ISO 15141-1:1998. Foodstuffs. Determination of ochratoxin A in cereals and cereal products. High performance liquid chromatographic method with silica gel clean up
BS EN ISO 15141-2:1998 BS EN ISO 15141-2:1998. Foodstuffs. Determination of ochratoxin A in cereals and cereal products. High performance liquid chromatographic method with bicarbonate clean up
BS EN 1900:1998 BS EN 1900:1998. Materials and articles in contact with foodstuffs. Non-metallic tableware. Terminology
BS EN 12655:1998 BS EN 12655:1998. Gymnastic equipment. Hanging rings. Functional and safety requirements, test methods
BS ISO TR 5658-1:1997 BS ISO TR 5658-1:1997. Reaction to fire tests. Spread of flame. Guidance on flame spread
BS EN 50107:1998 BS EN 50107:1998. Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV
BS ISO 9022-3:1998 BS ISO 9022-3:1998. Optics and optical instruments. Environmental test methods. Mechanical stress
BS ISO 9022-13:1998 BS ISO 9022-13:1998. Optics and optical instruments. Environmental test methods. Combined shock, bump or free fall and dry heat or cold
BS ISO 9022-15:1998 BS ISO 9022-15:1998. Optics and optical instruments. Environmental test methods. Combined digitally controlled broad-band random vibration and dry heat or cold
BS ISO 9022-16:1998 BS ISO 9022-16:1998. Optics and optical instruments. Environmental test methods. Combined bounce or steady-state acceleration and dry heat or cold
BS ISO 9022-21:1998 BS ISO 9022-21:1998. Optics and optical instruments. Environmental test methods. Combined low pressure and ambient temperature or dry heat
BS ISO 14050:1998 BS ISO 14050:1998. Environmental management. Vocabulary
BS EN 10130:1999 BS EN 10130:1999. Cold-rolled low-carbon steel flat products for cold forming. Technical delivery conditions
BS EN 60904-7:1998, IEC 60904-7:1998 BS EN 60904-7:1998, IEC 60904-7:1998. Photovoltaic devices. Computation of spectral mismatch error introduced in the testing of a photovoltaic device
BS EN 61345:1998, IEC 61345:1998 BS EN 61345:1998, IEC 61345:1998. UV test for photovoltaic (PV) modules
BS EN ISO 12224-1:1998 BS EN ISO 12224-1:1998. Solder wire, solid and flux cored. Specification and test methods. Classification and performance requirements
BS EN 12338:1998 BS EN 12338:1998. Water quality. Determination of mercury. Enrichment methods by amalgamation
BS EN 1981:1998 BS EN 1981:1998. Copper and copper alloys. Master alloys
BSI Shade chart BSI Shade chart. Methods of measuring the performance of household electrical appliances. Methods of measuring the performance of household electrical appliances. Shade chart for the a
98/561739DC 98/561739DC. BS 6068. Water quality. Part 5. Biological methods. New section. Determination of long term toxicity of substances to Daphnia magna Straus (ISO/DIS 10706)
BS EN 60904-8:1998, IEC 60904-8:1998 BS EN 60904-8:1998, IEC 60904-8:1998. Photovoltaic devices. Measurement of spectral response of a photovoltaic (PV) device
BS EN 60904-10:1998, IEC 60904-10:1998 BS EN 60904-10:1998, IEC 60904-10:1998. Photovoltaic devices. Methods of linearity measurement
BS 7920:1998 BS 7920:1998. Specification for luminance meters
98/104723DC 98/104723DC. ISO/DIS 14688. Geotechnics in civil engineering. Identification and classification of soils
98/123044DC 98/123044DC. Agglomerated cork floor tiles. Determination of dimensions and control of squareness and straightness of edges (ISO/DIS 9366)
98/655985DC 98/655985DC. ISO/IEC 14165-111. Information technology. Fibre channel. Part 111. Physical and signalling interface (FC-PH). Physical and Signaling Interface (FC-PH)
BS AU 50-1.4.1b:1998, ISO 4251-1:1998 BS AU 50-1.4.1b:1998, ISO 4251-1:1998. Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Specification for designation and dimensions for ply ratin
PD 6636:1998, CR 13033:1997 PD 6636:1998, CR 13033:1997. Personal protective equipment. Lifejackets and buoyancy aids. Guide for selection and use
BS 7370-5:1998 BS 7370-5:1998. Grounds maintenance. Recommendations for the maintenance of water areas
BS 1192-5:1998 BS 1192-5:1998. Construction drawing practice. Guide for structuring and exchange of CAD data
BS ISO 14740:1998 BS ISO 14740:1998. Forestry machinery. Backpack power units for brush cutters, grass trimmers, pole cutters and similar appliances. Safety requirements and testing
BS ISO 14865:1998 BS ISO 14865:1998. Machinery for forestry. Portable hand-held brush cutters and grass trimmers with backpack mounted combustion engine power source. Safety requirements and testing
BS ISO 6344-2:1998 BS ISO 6344-2:1998. Coated abrasives. Grain size analysis. Determination of grain size distribution of macrogrits P12 to P220
BS EN ISO 12864:1998 BS EN ISO 12864:1998. Ophthalmic optics. Contact lenses. Determination of scattered light
BS EN ISO 9341:1998, BS 7208-10:1998 BS EN ISO 9341:1998, BS 7208-10:1998. Optics and optical instruments. Contact lenses. Determination of inclusions and surface imperfections for rigid contact lense
BS EN ISO 9340:1999, BS 7208-9:1999 BS EN ISO 9340:1999, BS 7208-9:1999. Optics and optical instruments. Contact lenses. Determination of strains for rigid contact lenses
BS EN ISO 14534:1998, BS 7208-17:1998 BS EN ISO 14534:1998, BS 7208-17:1998. Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements
BS EN ISO 9338:1998, BS 7208-15:1998 BS EN ISO 9338:1998, BS 7208-15:1998. Optics and optical instruments. Contact lenses. Determination of the diameters
BS EN ISO 11401:1998 BS EN ISO 11401:1998. Plastics. Phenolic resins. Separation by liquid chromatography
BS EN ISO 11409:1998 BS EN ISO 11409:1998. Plastics. Phenolic resins. Determination of heats and temperatures of reaction by differential scanning calorimetry
BS EN ISO 8987:1998, BS 2782-8:Methods 835I & J BS EN ISO 8987:1998, BS 2782-8:Methods 835I & J. Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate
BS EN ISO 8989:1998, BS 2782-4:Method 451T:1998 BS EN ISO 8989:1998, BS 2782-4:Method 451T:1998. Plastics. Liquid phenolic resins. Determination of water miscibility
BS EN ISO 11402:1998 BS EN ISO 11402:1998. Plastics. Condensation resins. Determination of free formaldehyde
98/202793DC 98/202793DC. IEC 60927. Auxiliaries for lamps. Starting devices (other than glow starters). Performance requirements
98/652420DC 98/652420DC. ISO/IEC 9797-1. Information technology. Security techniques. Message authentication codes (MACs). Part 1. Mechanisms using a block cipher. Mechanisms using a block cipher
98/708084DC 98/708084DC. Test sieves for cereals. Amendment 1. Additional sizes (ISO 5223:1995/DAM 1)
BS 7755-3.13:1998, ISO 11047:1998 BS 7755-3.13:1998, ISO 11047:1998. Soil quality. Chemical methods. Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc in aqua regia
98/654081DC 98/654081DC. ISO/IEC FCD 14496-1. Information technology. Very-low bitrate audio-visual coding. Part 1. Systems. Systems
BS EN 658-1:1998 BS EN 658-1:1998. Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of tensile strength
DD ENV 1402-7:1998 DD ENV 1402-7:1998. Unshaped refractory products. Tests for preformed shapes
BS EN ISO 10344:1998, BS 7208-11:1998 BS EN ISO 10344:1998, BS 7208-11:1998. Optics and optical instruments. Contact lenses. Saline solution for contact lens testing
BS ISO 12647-3:1998 BS ISO 12647-3:1998. Graphic technology. Process control for the manufacture of half-tone colour separations, proof and production prints. Coldset offset lithography and letterpres
BS EN ISO 14555:1998 BS EN ISO 14555:1998. Welding. Arc stud welding of metallic materials
BS ISO/IEC 11584:1996 BS ISO/IEC 11584:1996. Information technology. Telecommunications and information exchange between systems. Private integrated services network. Circuit-mode multi-rate bearer se
BS ISO/IEC TR 11802-2:1997 BS ISO/IEC TR 11802-2:1997. Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Technical reports and
BS EN ISP 12064-1:1998 BS EN ISP 12064-1:1998. Information technology. International standardized profile FOD112. Open document format: image applications. Simple document structure. Raster graphics c
BS 2782-5:Method 552A:1999, ISO 4582:1998 BS 2782-5:Method 552A:1999, ISO 4582:1998. Methods of testing plastics. Optical and colour properties, weathering. Determination of changes in colour and vari
BS ISO/IEC 13642:1996 BS ISO/IEC 13642:1996. Information technology. Elements of management information related to the OSI Physical Layer
BS ISO/IEC 8882-1:1996 BS ISO/IEC 8882-1:1996. Information technology. Telecommunications and information exchange between systems. X.25-DTE conformance testing. General principles
BS ISO/IEC 10022:1996 BS ISO/IEC 10022:1996. Information technology. Open systems interconnection. Physical service definition
BS EN 721:1999 BS EN 721:1999. Leisure accommodation vehicles. Safety ventilation requirements
BS EN 1645-2:1999 BS EN 1645-2:1999. Leisure accommodation vehicles. Caravans. User payloads
BS EN 1646-2:1999 BS EN 1646-2:1999. Leisure accommodation vehicles. Motor caravans. User payloads
BS EN 12429:1998 BS EN 12429:1998. Thermal insulating products for building applications. Conditioning to moisture equilibrium under specified temperature and humidity conditions
BS ISO 5270:1998 BS ISO 5270:1998. Pulps. Laboratory sheets. Determination of physical properties
PD 6633:1998, CR 13259:1998 PD 6633:1998, CR 13259:1998. Gas welding equipment. Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes
BS EN 2591-210:1998 BS EN 2591-210:1998. Elements of electrical and optical connection. Test methods. Electrical overload
98/123104DC 98/123104DC. Amendment No. 1 to BS 6728:Part 1:1986. Thermoplastics hot water bottles, Part 1. Specification for hot water bottles manufactured from PVC compounds. Specification for hot wa
98/123103DC 98/123103DC. Amendment No. 1 to BS 6728:Part 2:1993. Thermoplastics hot water bottles. Part 2. Specification for hot water bottles manufactured from polyolefin materials. Specification for
98/123102DC 98/123102DC. Amendment No. 3 to BS 1970:1984. Rubber hot water bottles
98/202745DC 98/202745DC. IEC 60092-504. Electrical installations in ships. Part 504. Special features. Control and instrumentation (IEC document 18/848/CD). Special features - Control and instrumentat
BS EN 2591-306:1998 BS EN 2591-306:1998. Elements of electrical and optical connection. Test methods. Mould growth
BS EN 2591-307:1998 BS EN 2591-307:1998. Elements of electrical and optical connection. Test methods. Salt mist
BS EN 2591-308:1998 BS EN 2591-308:1998. Elements of electrical and optical connection. Test methods. Sand and dust
BS EN 2591-310:1998 BS EN 2591-310:1998. Elements of electrical and optical connection. Test methods. Cold
BS EN 2591-315:1998 BS EN 2591-315:1998. Elements of electrical and optical connection. Test methods. Fluid resistance
BS EN 2591-317:1998 BS EN 2591-317:1998. Elements of electrical and optical connection. Test methods. Flammability
BS EN 2591-318:1998 BS EN 2591-318:1998. Elements of electrical and optical connection. Test methods. Fire-resistance
BS EN 2591-322:1998 BS EN 2591-322:1998. Elements of electrical and optical connection. Test methods. Hermeticity
BS EN 2591-324:1998 BS EN 2591-324:1998. Elements of electrical and optical connection. Test methods. Interfacial sealing
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
