BIS Standards Catalogue
BS EN 50383:2002 BS EN 50383:2002. Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal st
PD ISO/IEC TR 18044:2004 PD ISO/IEC TR 18044:2004. Information technology. Security techniques. Information security incident management
BS EN 13609-1:2005 BS EN 13609-1:2005. Health informatics. Messages for maintenance of supporting information in healthcare systems. Updating of coding schemes
CWA 14356:2001 CWA 14356:2001. Agreed requirements on multimodal tracking and tracing systems
CWA 14357:2001 CWA 14357:2001. Quality of internet service. Project team final report
CWA 14167-1:2001 CWA 14167-1:2001. Security requirements for trustworthy systems managing certificates for electronic signatures. System security requirements
CWA 14172-4:2001 CWA 14172-4:2001. EESSI conformity assessment guidance. Signature creation applications and procedures for electronic signature verification
CWA 14172-3:2001 CWA 14172-3:2001. EESSI conformity assessment guidance. Trustworthy systems managing certificates for electronic signatures
CWA 14172-5:2001 CWA 14172-5:2001. EESSI conformity assessment guidance. Secure signature creation devices
CWA 14249:2001 CWA 14249:2001. FunStep (furniture product and business data) - funStep application reference model - ARM
BS ISO 9398-1:2003 BS ISO 9398-1:2003. Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Flatwork ironing machines
BS ISO 9398-2:2003 BS ISO 9398-2:2003. Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Batch drying tumblers
BS ISO 9398-3:2003 BS ISO 9398-3:2003. Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Washing tunnels
BS ISO 9398-4:2003 BS ISO 9398-4:2003. Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics. Washer-extractors
BS EN ISO 14001:2004 BS EN ISO 14001:2004. Environmental management systems. Requirements with guidance for use
BS ISO 14004:2004 BS ISO 14004:2004. Environmental management systems. General guidelines on principles, systems and supporting techniques
BS EN 12098-5:2005 BS EN 12098-5:2005. Controls for heating systems. Start-stop schedulers for heating systems
BS EN 14407:2004, BS 6068-5.35:2004 BS EN 14407:2004, BS 6068-5.35:2004. Water quality. Guidance standard for the identification, enumeration and interpretation of benthic diatom samples from running
PD IEC/TR 62266:2002, IEC/TR 62266:2002 PD IEC/TR 62266:2002, IEC/TR 62266:2002. Medical electrical equipment. Guidelines for implementation of DICOM in radiotherapy
DD ENV 14226:2002 DD ENV 14226:2002. Advanced technical ceramics. Test methods for ceramic powders. Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic abs
PD IEC TR 62284:2003 PD IEC TR 62284:2003. Effective area measurements of single-mode optical fibres. Guidance
ISO/IEC20061 : 2001 EDTN 1 ISO/IEC20061 : 2001 EDTN 1. ISO/IEC20061 : 2001 Information technology- 12,65 mm wide magnetic tape cassette for information interchange- Helical scan recording- DTF-2
BS EN 60789:2005 BS EN 60789:2005. Medical electrical equipment. Characteristics and test conditions of radionuclide imaging devices. Anger type gamma cameras
BS EN 13320:2002 BS EN 13320:2002. Surface active agents. Gas chromatographic trace determination of free ethylene oxide in ethoxylates
BS EN 13435:2002 BS EN 13435:2002. Surface active agents. Determination of free amine content of alkyl dimethyl betaines
NC/BSEN13560 : 2001 NC/BSEN13560 : 2001. bsen13560 : 2001 Surface active agents - Determination of amide nitrogen content - Potentiometric titration
BS EN 13716:2002 BS EN 13716:2002. Surface active agents. Determination of total base nitrogen. Potentiometric titration
BS EN 643:2002 BS EN 643:2002. Paper and board. European list of standard grades of recovered paper and board
BS EN ISO 10111:2002 BS EN ISO 10111:2002. Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods
BS ISO 1762:2001 BS ISO 1762:2001. Paper, board and pulps. Determination of residue (ash) on ignition at 525°C
BS EN 13770:2002 BS EN 13770:2002. Textiles. Determination of the abrasion resistance of knitted footwear garments
BS EN ISO 389-8:2004 BS EN ISO 389-8:2004. Acoustics. Reference zero for the calibration of audiometric equipment. Reference equivalent threshold sound pressure levels for pure tones and circumaural e
BS EN 442-3:2003 BS EN 442-3:2003. Specification for radiators and convectors. Evaluation of conformity
BS ISO 5248:2003 BS ISO 5248:2003. Textile machinery and accessories. Dyeing and finishing machinery. Vocabulary of ancillary devices
BS ISO 5250:2003 BS ISO 5250:2003. Textile machinery and accessories. Dyeing and finishing machinery. Terms for tentering and heat-treatment machinery
BS EN 230:2005 BS EN 230:2005. Automatic burner control systems for oil burners
BS EN 61965:2003 BS EN 61965:2003. Mechanical safety of cathode ray tubes
ISO/IEC20161 : 2001 EDTN 1 ISO/IEC20161 : 2001 EDTN 1. ISO/IEC20161 : 2001 Information technology- Private Integrated Services Network (PISN) Use of QSIG at the C reference point between a PINX and an
BS EN 13654-2:2001 BS EN 13654-2:2001. Soil improvers and growing media. Determination of nitrogen. Dumas method
BS EN ISO 20685:2005 BS EN ISO 20685:2005. 3-D scanning methodologies for internationally compatible anthropomteric databases
PD IEC TR 61282-4:2003 PD IEC TR 61282-4:2003. Fibre optic communication system design guides. Accommodation and utilization of non-linear effects
BS 8726-2:2002 BS 8726-2:2002. Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and design. Torsion springs
ISO6406 : 2005 EDTN2 ISO6406 : 2005 EDTN2. ISO6406 : 2005 Gas cylinders - Seamless steel gas cylinders - Periodic inspection and testing
ISO10460 : 2005 EDTN2 ISO10460 : 2005 EDTN2. ISO10460 : 2005 Gas cylinders - Welded carbon steel gas cylinders - Periodic inspection and testing
ISO10461 : 2005 EDTN 2 ISO10461 : 2005 EDTN 2. ISO10461 : 2005 Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic inspection and testing
ISO11372 : 2005 EDTN2 ISO11372 : 2005 EDTN2. ISO11372 : 2005 Cylinders for dissolved acetylene - Inspection at time of filling
BS EN 81714-3:2001, IEC 81714-3:1998 BS EN 81714-3:2001, IEC 81714-3:1998. Design of graphical symbols for use in the technical documentation of products. Classification of connect nodes, networks and
BS EN ISO 11341:2004, BS 3900-F14:2004 BS EN ISO 11341:2004, BS 3900-F14:2004. Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiatio
BS EN 12900:2005 BS EN 12900:2005. Refrigerant compressors. Rating conditions, tolerances and presentation of manufacturer's performance data
PD IEC TR 61774:1997 PD IEC TR 61774:1997. Overhead lines. Meteorological data for assessing climatic loads
BS ISO 10007:2003 BS ISO 10007:2003. Quality management systems. Guidelines for configuration management
BS ISO 10006:2003 BS ISO 10006:2003. Quality management systems. Guidelines for quality management in projects
DD ENV 13287:2002 DD ENV 13287:2002. Safety, protective and occupational footwear for professional use. Test method for the determination of slip resistance
DD ENV 807:2001 DD ENV 807:2001. Wood preservatives. Determination of the effectiveness against soft rotting micro-fungi and other soil inhabiting micro-organisms
BS ISO 15736:2006 BS ISO 15736:2006. Ships and marine technology. Pyrotechnic life-saving appliances. Testing, inspection and marking of production units
BS ISO 12128:2001 BS ISO 12128:2001. Plain bearings. Lubrication holes, grooves and pockets. Dimensions, types, designation and their application to bearing bushes
PD 6682-1:2003 PD 6682-1:2003. Aggregates. Aggregates for concrete. Guidance on the use of BS EN 12620
PD 6682-2:2003 PD 6682-2:2003. Aggregates. Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas. Guidance on the use of BS EN 13043
PD 6682-3:2003 PD 6682-3:2003. Aggregates. Aggregates for mortar. Guidance on the use of BS EN 13139
PD 6682-4:2003 PD 6682-4:2003. Aggregates. Lightweight aggregates for concrete, mortar and grout. Guidance on the use of BS EN 13055-1
PD 6682-5:2005 PD 6682-5:2005. Aggregates. Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications. Guidance on the use of BS EN 13055-2
PD 6682-7:2003 PD 6682-7:2003. Aggregates. Armourstone. Guidance on the use of BS EN 13383
PD 6682-8:2004 PD 6682-8:2004. Aggregates. Aggregates for railway ballast. Guidance on the use of BS EN 13450
PD 6682-9:2003 PD 6682-9:2003. Aggregates. Guidance on the use of European test method standards
BS ISO 1922:2001 BS ISO 1922:2001. Rigid cellular plastics. Determination of shear strength
BS EN 943-2:2002 BS EN 943-2:2002. Protective clothing against liquid and gaseous chemicals, aerosols and solid particles. Performance requirements for $0Qgas-tight$0R (Type 1) chemical protective sui
BS EN ISO 14438:2002 BS EN ISO 14438:2002. Glass in building. Determination of energy balance value. Calculation method
BS ISO 15169:2003 BS ISO 15169:2003. Petroleum and liquid petroleum products. Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurem
ISO8895 : 2004 EDTN2 ISO8895 : 2004 EDTN2 . ISO8895 : 2004 Shaped insulating refractory products - Determination of cold crushing strength
BS 1088-1:2003 BS 1088-1:2003. Marine plywood. Requirements
BS 1088-2:2003 BS 1088-2:2003. Marine plywood. Determination of bonding quality using the knife test
PD ISO/IEC TR 9294:2005 PD ISO/IEC TR 9294:2005. Information technology. Guidelines for the management of software documentation
ISO/IEC14496-5 : 2001(CD-ROM) ISO/IEC14496-5 : 2001(CD-ROM). ISO/IEC14496-5: 2001 Information technology- Coding of audio-visual objects. Part 5: Reference Software
BS EN 61076-2-001:2002, IEC 61076-2-001:2001 BS EN 61076-2-001:2002, IEC 61076-2-001:2001. Connectors for electronic equipment. Circular connectors. Blank detail specification
BS ISO 7781:2001 BS ISO 7781:2001. Styrene-butadiene rubber, raw. Determination of soap and organic acid content
BS 7543:2003 BS 7543:2003. Guide to durability of buildings and building elements, products and components
BS EN 13523-21:2003 BS EN 13523-21:2003. Coil coated metals. Test methods. Evaluation of outdoor exposed panels
BS EN 13523-22:2003 BS EN 13523-22:2003. Coil coated metals. Test methods. Colour difference. Visual comparison
BS EN 61076-4-100:2002, IEC 61076-4-100:2001 BS EN 61076-4-100:2002, IEC 61076-4-100:2001. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data appl
BS 7079-A3:2002, ISO 8501-3:2001 BS 7079-A3:2002, ISO 8501-3:2001. Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Preparat
BS ISO 18165:2001 BS ISO 18165:2001. Petroleum and natural gas industries. Performance testing of cementing float equipment
BS ISO 9073-11:2002 BS ISO 9073-11:2002. Textiles. Test methods for nonwovens. Run-off
BS ISO 9073-12:2002 BS ISO 9073-12:2002. Textiles. Test methods for nonwovens. Demand absorbency
BS EN 1496:2006 BS EN 1496:2006. Personal fall protection equipment. Rescue lifting devices
BS EN 1498:2006 BS EN 1498:2006. Personal fall protection equipment. Rescue loops
BS EN 60099-4:2004 BS EN 60099-4:2004. Surge arresters. Metal-oxide surge arresters without gaps for a.c. systems
PD 6614:2002 PD 6614:2002. Obsolescence management. Guide to the substitution of components in electronic equipment
BS EN 14296:2005 BS EN 14296:2005. Sanitary appliances. Communal washing troughs
BS ISO/IEC 13888-1:2004 BS ISO/IEC 13888-1:2004. IT security techniques. Non-repudiation. General
BS ISO 10399:2004 BS ISO 10399:2004. Sensory analysis. Methodology. Duo-trio test
DD ISO/TS 12902:2002 DD ISO/TS 12902:2002. Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen. Instrumental methods
BS EN 9133:2004 BS EN 9133:2004. Aerospace series. Quality management systems. Qualification procedure for aerospace standard parts
BS EN 14231:2003 BS EN 14231:2003. Natural stone test methods. Determination of the slip resistance by means of the pendulum tester
BS EN 10289:2002 BS EN 10289:2002. Steel tubes and fittings for onshore and offshore pipelines. External liquid applied epoxy and epoxy-modified coatings
BS EN ISO 11904-2:2004 BS EN ISO 11904-2:2004. Acoustics. Determination of sound immission from sound sources placed close to the ear. Technique using a manikin
BS ISO 8404:2003 BS ISO 8404:2003. Tools for moulding. Angle pins
BS EN 12101-10:2005 BS EN 12101-10:2005. Smoke and heat control systems. Power supplies
BS ISO 10457:2002 BS ISO 10457:2002. Textile machinery. Dyeing and finishing machines. Nominal speeds
ISO11659-2 : 2004 EDTN 1 ISO11659-2 : 2004 EDTN 1. ISO11659-2 : 2004 Textile machinery and accessories - Machine parts in contact with textile processing oils . Part 2: Determination of the impact on
ISO11659-3 : 2004 EDTN 1 ISO11659-3 : 2004 EDTN 1. ISO11659-3 : 2004 Textile machinery and accessories - Machine parts in contact with textile processing oils . Part 3: Determination of the impact on
BS EN 60623:2001, IEC 60623:2001 BS EN 60623:2001, IEC 60623:2001. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Vented nickel-cadmium prismatic rechargeable single
BS ISO 15186-2:2003 BS ISO 15186-2:2003. Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity. Field measurements
NC/BSENISO8092-2 : 2002 NC/BSENISO8092-2 : 2002. Road vehicles - Connections for on-board electrical wiring harnesses. Part 2: Definitions, test methods and general performance requirements
BS ISO 446:2004 BS ISO 446:2004. Micrographics. ISO character and ISO test chart No 1. Description and use
BS EN ISO 15848-1:2006 BS EN ISO 15848-1:2006. Industrial valves. Measurement, test and qualification procedures for fugitive emissions. Classification system and qualification procedures for type tes
BS EN ISO 15848-2:2006 BS EN ISO 15848-2:2006. Industrial valves. Measurement, test and qualification procedures for fugitive emissions. Production acceptance test of valves
BS ISO 16063-13:2001 BS ISO 16063-13:2001. Methods for the calibration of vibration and shock transducers. Primary shock calibration using laser interferometry
BS EN 13084-7:2005 BS EN 13084-7:2005. Free-standing chimneys. Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners.
BS ISO 7919-2:2001 BS ISO 7919-2:2001. Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. Land-based steam turbines and generators in excess o
BS ISO 10816-2:2001 BS ISO 10816-2:2001. Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Land-based steam turbines and generators in excess of 50 MW with n
BS EN 142:2002 BS EN 142:2002. Respiratory protective devices. Mouthpiece assemblies. Requirements, testing, marking
ISO/IEC14496-13 : 2004 EDTN 1 ISO/IEC14496-13 : 2004 EDTN 1. ISO/IEC14496-13 : 2004 Coding of audio-visual objects . Part 13 : Intellectual Property Management and Protection (IPMP) extensions
BS EN ISO 7886-3:2005 BS EN ISO 7886-3:2005. Sterile hypodermic syringes for single use. Auto-disable syringes for fixed dose immunization
BS EN 54-17:2005 BS EN 54-17:2005. Fire detection and fire alarm systems. Short-circuit isolators
BS EN ISO 21171:2006 BS EN ISO 21171:2006. Medical gloves. Determination of removable surface powder
BS ISO/TR 12391-3:2002 BS ISO/TR 12391-3:2002. Gas cylinders. Refillable seamless steel. Performance tests. Fracture performance tests. Cyclical burst tests
BS EN 2088:2005 BS EN 2088:2005. Aerospace series. Aluminium alloy AL-P2014A. T4 or T42. Clad sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 61691-2:2001, IEC 61691-2:2001 BS EN 61691-2:2001, IEC 61691-2:2001. Design automation. Behavioural languages. VHDL multilogic system for model interoperability
BSEN61691-3-2 : 2002 BSEN61691-3-2 : 2002 . BSEN61691-3-2 : 2002 Behaviour language. Part 3-2: Mathematical operation in VHDL
BSEN61691-3-3 : 2002 , IEC 61691-3-3:2001 BSEN61691-3-3 : 2002 , IEC 61691-3-3:2001.
PAS 44:2002 PAS 44:2002. Official identification eartags for cattle. Specification
BS EN 61988-4:2007 BS EN 61988-4:2007. Plasma display panels. Climatic and mechanical testing methods
ISO21069-1 : 2004 (R08) EDTN1 ISO21069-1 : 2004 (R08) EDTN1. ISO21069-1 : 2004 Road vehicles - Test of braking systems on vehicles with a permissible mass 0f over 3,5 t using a roller brake tester. Pa
BS EN 14205:2003 BS EN 14205:2003. Natural stone test methods. Determination of Knoop hardness
BS EN 2089:2005 BS EN 2089:2005. Aluminium alloy AL-P2014A T6 or T62. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 2090:2005 BS EN 2090:2005. Aluminium alloy AL-P2024-T3. Clad sheet and strip. 0,3 mm ≤ a ≤ 6 mm
BS EN 2092:2005 BS EN 2092:2005. Aerospace series. Aluminium alloy AL-P7075-T6 or T62. Clad sheet and strip. 0,4 mm ≤a ≤6 mm
BS EN 2395:2005 BS EN 2395:2005. Aerospace series. Aluminium alloy AL-P2014A-T4 or T42. Sheet and strip. 0,4 mm ≤a ≤6 mm
BS EN 2422:2005 BS EN 2422:2005. Aluminium alloy AL-P2124-T351. Plate. 25 mm < a ≤ 120 mm
BS EN 2693:2005 BS EN 2693:2005. Aerospace series. Aluminium alloy AL-P5086-H111. Sheet and strip. 0,3 mm ≤a ≤6 mm
BS EN 2694:2005 BS EN 2694:2005. Aerospace series. Aluminium alloy AL-P6061-T6 or T62. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 2511:2005 BS EN 2511:2005. Aluminium alloy AL-P7075-T7351. Plate. 6 mm < a ≤ 100 mm
BS EN 2695:2005 BS EN 2695:2005. Aerospace series. Aluminium alloy AL-P6081-T6. Sheet and strip. 0,3 mm ≤a ≤6 mm
BS EN 2696:2005 BS EN 2696:2005. Aerospace series. Aluminium alloy AL-P7075-T6 or T62. Sheet and strip. 0,4 mm ≤a ≤6 mm
BS 2751:2001 BS 2751:2001. General purpose acrylonitrile-butadiene rubber compounds. Specification
BS EN 593:2004 BS EN 593:2004. Industrial valves. Metallic butterfly valves
BS EN 1789:2007 BS EN 1789:2007. Medical vehicles and their equipment. Road ambulances
BS EN ISO 2867:2006 BS EN ISO 2867:2006. Earth-moving machinery. Access systems
BS EN ISO 10993-1:2003 BS EN ISO 10993-1:2003. Biological evaluation of medical devices. Evaluation and testing
BS ISO 1268-1:2001 BS ISO 1268-1:2001. Fibre-reinforced plastics. Methods of producing test plates. General conditions
BS ISO 15024:2001 BS ISO 15024:2001. Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, Gic, for unidirectionally reinforced materials
BS EN 13286-48:2005 BS EN 13286-48:2005. Unbound and hydraulically bound mixtures. Test method for the determination of degree of pulverisation
BS EN 14984:2006 BS EN 14984:2006. Liming materials. Determination of product effect on soil pH. Soil incubation method
BS EN 14888:2005 BS EN 14888:2005. Fertilizers and liming materials. Determination of cadmium content
BS EN 13286-50:2004 BS EN 13286-50:2004. Unbound and hydraulically bound mixtures. Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating tab
BS EN 13286-51:2004 BS EN 13286-51:2004. Unbound and hydraulically bound mixtures. Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction
BS ISO 18894:2006 BS ISO 18894:2006. Coke. Determination of coke reactivity index (CRI) and coke strength after reaction (CSR)
ISO/IEC21000-3 : 2003 EDTN 1 ISO/IEC21000-3 : 2003 EDTN 1. ISO/IEC21000-3 : 2003 Information technology- Multimedia framework (MPEG-21). Part 3: Digital Item Identification
BS EN 60115-9:2004 BS EN 60115-9:2004. Fixed resistors for use in electronic equipment. Sectional specification. Fixed surface mount resistor networks with individually measurable resistors
BS EN 60115-9-1:2004 BS EN 60115-9-1:2004. Fixed resistors for use in electronic equipment. Blank detail specification. Fixed surface mount resistor networks with individually measurable resistors. As
BS EN 10323:2004 BS EN 10323:2004. Steel wire and products. Bead wire
BS EN 10290:2002 BS EN 10290:2002. Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings
BS ISO 16869:2001 BS ISO 16869:2001. Plastics. Assessment of the effectiveness of fungistatic compounds in plastics formulations
WD/ISO/ASTM51204 : 2002 EDTN 1 WD/ISO/ASTM51204 : 2002 EDTN 1. ISO/ASTM51204 Practice for dosimetry in gamma irradiation facilities for food processing
BS EN 12206-1:2004 BS EN 12206-1:2004. Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes. Coatings prepared from coating powder
WD/ISO/ASTM51818 : 2002 EDTN 1 WD/ISO/ASTM51818 : 2002 EDTN 1. ISO/ASTM51818 : 2002 Practice for dosimetry in an electron beam facility for radiation processing at tenergies between 80 and 300 KeV
WD/ISO/ASTM51276 : 2002 EDTN 1 WD/ISO/ASTM51276 : 2002 EDTN 1. ISO/ASTM51276 : 2002 Practice for use of a polymethylmethacrylate dosimetry system
WD/ISO/ASTM51649 : 2002 EDTN 1 WD/ISO/ASTM51649 : 2002 EDTN 1. ISO/ASTM51649 : 2002 Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 KeV and 25 MeV
WD/ISO/ASTM51401 : 2002 EDTN 1 WD/ISO/ASTM51401 : 2002 EDTN 1. ISO/ASTM51401 : 2002 Practice for use of a diochromate dosimetry system
WD/ISO/ASTM51702 : 2002 EDTN 1 WD/ISO/ASTM51702 : 2002 EDTN 1. ISO/ASTM51702 : 2002 Practice for dosimetry in a gamma irradiation facility for radiation processing
WD/ISO/ASTM51631 : 2002 EDTN 1 WD/ISO/ASTM51631 : 2002 EDTN 1. ISO/ASTM51631 : 2002 Practice for use of calometric dosimetry systems for electron beam doe measurements and dosimeter calibrations
WD/ISO/ASTM51607 : 2002 EDTN 1 WD/ISO/ASTM51607 : 2002 EDTN 1. ISO/ASTM51607 : 2002 Practice for use of the alanine- EPR dosimetry system
WD/ISO/ASTM51707 : 2002 EDTN 1 WD/ISO/ASTM51707 : 2002 EDTN 1. ISO/ASTM51707 : 2002 Guide for estimating uncertainties in dosimetry for radiation processing
WD/ISO/ASTM51400 : 2002 EDTN 1 WD/ISO/ASTM51400 : 2002 EDTN 1. ISO/ASTM51400 : 2002 Practice for characterization and performance of a high dose radiation dosimetry calibration laboratory
ISO/IEC18021 : 2002 EDTN 1 ISO/IEC18021 : 2002 EDTN 1. ISO/IEC18021 : 2002 Information technology- User interfaces for mobile tools for management of database communications in a client-server model
BS EN 13277-5:2002 BS EN 13277-5:2002. Protective equipment for martial arts. Additional requirements and test methods for genital protectors and abdominal protectors
BS EN 13894-1:2003 BS EN 13894-1:2003. Products and systems for the protection and repair of concrete structures. Test methods. Determination of fatigue under dynamic loading. During cure
BS EN 450-2:2005 BS EN 450-2:2005. Fly ash for concrete. Conformity evaluation
ISO/IEC14776-113 : 2002 EDTN 1 ISO/IEC14776-113 : 2002 EDTN 1. ISO/IEC14476-113 : 2002 Information technology- Small Computer system interface (SCSI). Part 113: Parallel Interface-3 (SPI-3)
ISO/IEC8859-11 : 2001EDTN1 (R08) ISO/IEC8859-11 : 2001EDTN1 (R08). ISO/IEC8859-11 : 2001 Information technology- 8-bit single-byte coded graphic character sets. Part 11: Latin/Thai alphabet
BS EN ISO 658:2002 BS EN ISO 658:2002. Oilseeds. Determination of content of impurities
BS IEC 60092-101:1994 BS IEC 60092-101:1994. Electrical installation in ships. Definitions and general requirements
BS EN 14341:2006 BS EN 14341:2006. Industrial valves. Steel check valves
BS IEC 60092-202:1994 BS IEC 60092-202:1994. Electrical installation in ships. System design. Protection
BS IEC 60092-301:1980 BS IEC 60092-301:1980. Electrical installation in ships. Equipment. Generators and motors
BS IEC 60092-303:1980 BS IEC 60092-303:1980. Electrical installation in ships. Equipment. Transformers for power and lighting
BS IEC 60092-304:1980 BS IEC 60092-304:1980. Electrical installation in ships. Equipment. Semiconductor convertors
BS EN ISO 9342-1:2005 BS EN ISO 9342-1:2005. Optics and optical instruments. Test lenses for calibration of focimeters. Test lenses for focimeters used for measuring spectacle lenses
BS IEC 60092-305:1980 BS IEC 60092-305:1980. Electrical installation in ships. Equipment. Accumulator (storage) batteries
BS IEC 60092-401:1980 BS IEC 60092-401:1980. Electrical installation in ships. Installation and test of completed installation
BS EN 61300-2-48:2003 BS EN 61300-2-48:2003. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Temperature-humidity cycling
BS EN 81-73:2005 BS EN 81-73:2005. Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts. Behaviour of lifts in the event of fire
BS EN 60734:2003 BS EN 60734:2003. Household electrical appliances. Performance. Hard water for testing
DD ISO/TS 19979:2004 DD ISO/TS 19979:2004. Ophthalmic optics. Contact lenses. Hygienic management of multipatient use trial contact lenses
BS EN 81-80:2003 BS EN 81-80:2003. Safety rules for the construction and installation of lifts. Existing lifts. Rules for the improvement of safety of existing passenger and goods passenger lifts
BS EN 12015:2004 BS EN 12015:2004. Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Emission
BS ISO 17514:2004 BS ISO 17514:2004. Time-measuring instruments. Photoluminescent deposits. Test methods and requirements
BS EN 14325:2004 BS EN 14325:2004. Protective clothing against chemicals. Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages
BS ISO 6980-1:2006 BS ISO 6980-1:2006. Nuclear energy. Reference beta-particle radiation. Methods of production
DD CEN/TS 1071-10:2004 DD CEN/TS 1071-10:2004. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by cross section
BS EN 50065-2-2:2003 BS EN 50065-2-2:2003. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Immunity requirements for mains communications equipment and sy
DD CEN/TS 14441:2003 DD CEN/TS 14441:2003. Postal services. Automatic identification of receptacles and containers. Mail aggregates
BS EN 14615:2005 BS EN 14615:2005. Postal services. Digital postage marks. Applications, security and design
BS EN 14338:2003 BS EN 14338:2003. Paper and board intended to come into contact with foodstuffs. Conditions for determination of migration from paper and board using modified polyphenylene oxide (MPP
ISO17874-2 : 2004 (R08) EDTN1 ISO17874-2 : 2004 (R08) EDTN1. ISO17874-2 : 2004 Remote-handling devices for radioactive materials -. Part 2: Mechanical master-slave manipulators
BS EN 14322:2004 BS EN 14322:2004. Wood-based panels. Melamine faced boards for interior uses. Definition, requirements and classification
BS EN 847-3:2004 BS EN 847-3:2004. Tools for woodworking. Safety requirements . Clamping devices
BS EN 14323:2004 BS EN 14323:2004. Wood-based panels. Melamine faced boards for interior uses. Test methods
HB 10202:2002 HB 10202:2002. A Guide for the Adoption of ISO 9001:2000 in Healthcare
HB 10203:2002 HB 10203:2002. A Guide for the Adoption of ISO 9001:2000 for Industries within the Foodchain
ISO6651 : 2001 EDTN 3 ISO6651 : 2001 EDTN 3. ISO6651 : 2001 Animal feeding stuffs- Semi-quantative determination of aflatoxin B1 - Thin layer chromatographic methods
BS ISO 12164-2:2001 BS ISO 12164-2:2001. Hollow taper interface with flange contact surface. Receivers. Dimensions
BS EN 14178-1:2004 BS EN 14178-1:2004. Glass in building. Basic alkaline earth silicate glass. Float glass
BS EN 14321-1:2005 BS EN 14321-1:2005. Glass in building. Thermally toughened alkaline earth silicate safety glass. Definition and description
BS EN 14321-2:2005 BS EN 14321-2:2005. Glass in building. Thermally toughened alkaline earth silicate safety glass. Evaluation of conformity/Product standard
WD/ISO11088 : 2004 EDTN.3 WD/ISO11088 : 2004 EDTN.3. ISO11088 : 2004 Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system
BS EN 14334:2005 BS EN 14334:2005. Inspection and testing of LPG road tankers
BS ISO 15380:2002 BS ISO 15380:2002. Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HETG, HEPG, HEES and HEPR
BS ISO 12164-1:2001 BS ISO 12164-1:2001. Hollow taper interface with flange contact surface. Shanks. Dimensions
BS EN 14328:2005 BS EN 14328:2005. Protective clothing. Gloves and armguards protecting against cuts by powered knives. Requirements and test methods
BS EN 14331:2004 BS EN 14331:2004. Liquid petroleum products. Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates. Liquid chromatography (LC)/gas chromatography
PAS 47:2003 PAS 47:2003. Electric security fences. Design, installation and maintenance. Specification
ISO12364 : 2001 EDTN 1 ISO12364 : 2001 EDTN 1. ISO12364 : 2001 Two-wheeled motorcycles- Antilock braking systems (ABS)- Tests and measurement methods
BS EN 14337:2005 BS EN 14337:2005. Heating systems in buildings. Design and installation of direct electrical room heating systems
ISO12366 : 2001 EDTN 1 ISO12366 : 2001 EDTN 1. ISO12366 : 2001 Two-wheeled mopeds - Antilock braking systems (ABS)- Tests and measurement methods
BS EN 14179-1:2005 BS EN 14179-1:2005. Glass in building. Heat-soaked thermally-toughened soda lime silicate safety glass. Definition and description
BS EN 12600:2002 BS EN 12600:2002. Glass in building. Pendulum test. Impact test method and classification for flat glass
ISO/TS15007-2 : 2001 EDTN 1 ISO/TS15007-2 : 2001 EDTN 1. ISO/TS15007-2 : 2001 Road vehicles- Measurement of driver visual behaviour with respect to transport information and control systems. Part 2: E
PAS 43:2002 PAS 43:2002. Safe working of vehicle breakdown and recovery operators. Management system specification (Purchase from www.survivepas43.co.uk only. 2004 Amendment 1 now available).
ISO11003-2 : 2001 EDTN 2 ISO11003-2 : 2001 EDTN 2. ISO11003-2 : 2001 Adhesives- Determination of shear behaviour of structural adhesives -. Part 1: Tensile test method using thick adherents
PAS 49:2002 PAS 49:2002. Security consultancy. Code of practice
BS 7801:2004 BS 7801:2004. Escalators and moving walks. Code of practice for safe working on escalators and moving walks
BS EN 1828:2002 BS EN 1828:2002. Health informatics. Categorial structure for classifications and coding systems of surgical procedures
BS ISO/IEC 15946-4:2004 BS ISO/IEC 15946-4:2004. Information technology. Security techniques. Cryptographic techniques based on elliptic curves. Digital signatures giving message recovery
ISO/IEC14476-2 : 2003 EDTN1 ISO/IEC14476-2 : 2003 EDTN1. Information technology -- Enhanced Communications Transport Protocol (ECTS): Specification of QoS Management for Simple Multicast Transport (Co
BS EN 14348:2005 BS EN 14348:2005. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area in
ISO/IEC20062 : 2001 EDTN 1 ISO/IEC20062 : 2001 EDTN 1. ISO/IEC20062 : 2001 Information technology- 8 mm wide magnetic tape cartridge for information interchange- Helical scan recording- VXA-1 format
BS EN ISO 7539-7:2005 BS EN ISO 7539-7:2005. Corrosion of metals and alloys. Stress corrosion testing. Method for slow strain rate testing
BS ISO 3875:2004 BS ISO 3875:2004. Machine tools. Test conditions for external cylindrical centreless grinding machines. Testing of the accuracy
DD IEC/PAS 60793-1-49:2002 DD IEC/PAS 60793-1-49:2002. Optical fibres. Measurement methods and test procedures. Differential mode delay
BS EN 14350-2:2004 BS EN 14350-2:2004. Child use and care articles. Drinking equipment. Chemical requirements and test methods
BS EN 13371:2002 BS EN 13371:2002. Cryogenic vessels. Couplings for cryogenic service
BS EN 14340:2004 BS EN 14340:2004. Leather. Physical and mechanical tests. Determination of water repellency of garment leather
BS EN 14326:2003 BS EN 14326:2003. Leather. Physical and mechanical tests. Determination of resistance to horizontal spread of flame
DD IEC TS 61994-4-2:2003 DD IEC TS 61994-4-2:2003. Piezoelectric and dielectric devices for frequency control and selection. Glossary. Piezoelectric and dielectric materials. Piezoelectric ceramics
BS EN 60444-8:2003 BS EN 60444-8:2003. Measurement of quartz crystal unit parameters. Test fixture for surface mounted quartz crystal units
BS EN ISO 11812:2002 BS EN ISO 11812:2002. Small craft. Watertight cockpits and quick-draining cockpits
BS EN 14327:2003 BS EN 14327:2003. Leather. Physical and mechanical tests. Determination of abrasion resistance of automotive leather
BS EN 14350-1:2004 BS EN 14350-1:2004. Child use and care articles. Drinking equipment. General and mechanical requirements and tests
BS EN ISO 20823:2003 BS EN ISO 20823:2003. Petroleum and related products. Determination of the flammability characteristics of fluids in contact with hot surfaces. Manifold ignition test
BS EN 14344:2004 BS EN 14344:2004. Child use and care articles. Child seats for cycles. Safety requirements and test methods
BS EN 60539-2:2004 BS EN 60539-2:2004. Directly heated negative temperature coefficient thermistors. Sectional specification. Surface mount negative temperature coefficient thermistors
DD CEN/TS 14631:2003 DD CEN/TS 14631:2003. Automated processing of mail items. Automatic identification of receptacles and containers. Receptacle asset numbering
ISO22093 : 2003 EDTN 1 ISO22093 : 2003 EDTN 1. ISO22093 : 2003 Industrial automation systems and integration - Physical device control Dimensional measuring interface standard (DMIS)
BS EN 61076-3-106:2006 BS EN 61076-3-106:2006. Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for protective housings for use with 8-way shield
PD CEN/TR 14560:2003 PD CEN/TR 14560:2003. Guidelines for selection, use, care and maintenance of protective clothing against heat and flame
BS EN ISO 13709:2003 BS EN ISO 13709:2003. Centrifugal pumps for petroleum, petrochemical and natural gas industries
BS EN ISO 3613:2001 BS EN ISO 3613:2001. Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys. Test methods
BS 6002-3:2005 BS 6002-3:2005. Sampling procedures for inspection by variables. Guide to double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
BS EN 13458-1:2002 BS EN 13458-1:2002. Cryogenic vessels. Static vacuum insulated vessels. Fundamental requirements
BS EN 13648-1:2002 BS EN 13648-1:2002. Cryogenic vessels. Safety devices for protection against excessive pressure. Safety valves for cryogenic service
BS EN 13648-2:2002 BS EN 13648-2:2002. Cryogenic vessels. Safety devices for protection against excessive pressure. Bursting disc safety devices for cryogenic service
BS EN 14332:2004 BS EN 14332:2004. Foodstuffs. Determination of trace elements. Determination of arsenic in seafood by graphite furnace atomic absorption spectrometry (GFAAS) after microwave digestion
BS EN 14333-1:2004 BS EN 14333-1:2004. Non fatty foods. Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim). HPLC method with solid phase extraction clean
BS EN 14333-2:2004 BS EN 14333-2:2004. Non fatty foods. Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim). HPLC method with gel permeation chromatograph
BS EN 14333-3:2004 BS EN 14333-3:2004. Non-fatty foods. Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim). HPLC method with liquid/liquid-partition clea
BS EN 14352:2004 BS EN 14352:2004. Foodstuffs. Determination of fumonisin B1 and B2 in maize based foods. HPLC method with immunoaffinity column clean up
HB 10204:2002 HB 10204:2002. Handbook on the Wiring Regulations. 3rd edition
HB 10209:2002 HB 10209:2002. Wiring Regulations: Guidance Note 6: Protection against overcurrent. 4th edition
HB 10206:2002 HB 10206:2002. Wiring Regulations: Guidance Note 2: Isolation and switching. 4th edition
HB 10207:2002 HB 10207:2002. Wiring Regulations: Guidance Note 4: Protection against fire. 4th edition
HB 10208:2002 HB 10208:2002. Wiring Regulations: Guidance Note 5: Protection against electric shock. 4th edition
HB 10205:2002 HB 10205:2002. Wiring Regulations: Guidance Note 1: Selection and erection of equipment. 4th edition
BS EN 61754-7:2001 BS EN 61754-7:2001. Fibre optic connector interfaces. Type MPO connector family
BS EN 60862-1:2003 BS EN 60862-1:2003. Surface acoustic wave (SAW) filters of assessed quality. Generic specification
BS ISO 9123:2001 BS ISO 9123:2001. Measurement of liquid flow in open channels. Stage-fall-discharge relationships
PD R210-008:2002 PD R210-008:2002. Guide to EMC conformity of apparatus designed for military and other purposes
ISO10303-521 : 2003 EDTN 1 ISO10303-521 : 2003 EDTN 1. ISO10303-521 : 2003 Industrial automation systems and integration - Product data representation and exchange -. Part 521: Application interpreted
ISO13584-25 : 2004 (CD-ROM) EDTN 1 ISO13584-25 : 2004 (CD-ROM) EDTN 1. ISO13584-25 : 2004 Industrial automation systems and integration - Parts library . Part 25: Logical resource: Logical model of su
BS EN 61753-051-3:2002, IEC 61753-051-3:2001 BS EN 61753-051-3:2002, IEC 61753-051-3:2001. Fibre optic interconnecting devices and passive components performance standard. Single-mode fibre, plug-styl
BS EN 13138-3:2003 BS EN 13138-3:2003. Buoyant aids for swimming instruction. Safety requirements and test methods for swim seats to be worn
BS EN 61000-6-3:2007 BS EN 61000-6-3:2007. Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
BS EN 926-2:2005 BS EN 926-2:2005. Paragliding equipment. Paragliders. Requirements and test methods for classifying flight safety characteristics
BS EN 13451-10:2004 BS EN 13451-10:2004. Swimming pool equipment. Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment
BS EN 61753-052-3:2002, IEC 61753-052-3:2001 BS EN 61753-052-3:2002, IEC 61753-052-3:2001. Fibre optic interconnecting devices and passive components performance standard. Single-mode fibre, pigtailed
BS EN 61000-6-4:2007 BS EN 61000-6-4:2007. Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
BS EN 13451-11:2004 BS EN 13451-11:2004. Swimming pool equipment. Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads
ISO21727 : 2004 EDTN1 ISO21727 : 2004 EDTN1. ISO21727 : 2004 Cinematography - Method of measurement of perceived loudness of motion-picture audio material
BS EN ISO 11403-3:2001 BS EN ISO 11403-3:2001. Plastics. Acquisition and presentation of comparable multipoint data. Environmental influences on properties
BS EN ISO 6270-1:2001, BS 3900-F9:2001 BS EN ISO 6270-1:2001, BS 3900-F9:2001. Paints and varnishes. Determination of resistance to humidity. Continuous condensation
BS EN 13335:2002 BS EN 13335:2002. Leather. Physical and mechanical tests. Determination of flex resistance by the vamp flex method
BS EN ISO 6847:2001 BS EN ISO 6847:2001. Welding consumables. Deposition of a weld metal pad for chemical analysis
BS ISO 10185:2004 BS ISO 10185:2004. Tobacco and tobacco products. Vocabulary
BS EN 14339:2005 BS EN 14339:2005. Underground fire hydrants
BS ISO 15930-1:2001 BS ISO 15930-1:2001. Graphic technology. Prepress digital data exchange. Use of PDF. Complete exchange using CMYK data (PDF/X-1) and PDF/X-1a)
BS ISO 16833:2006 BS ISO 16833:2006. Road vehicles. Wheels. Measurement of radial and lateral run-out
BS ISO 16067-2:2004 BS ISO 16067-2:2004. Photography. Electronic scanners for photographic images. Spatial resolution measurements. Film scanners
BS ISO 4020:2001 BS ISO 4020:2001. Road vehicles. Fuel filters for diesel engines.Test methods
BS EN 764-1:2004 BS EN 764-1:2004. Pressure equipment. Terminology. Pressure, temperature, volume, nominal size
KIT 96 KIT 96. Software process kit
BS EN 764-2:2002 BS EN 764-2:2002. Pressure equipment. Quantities, symbols and units
BS EN 764-3:2002 BS EN 764-3:2002. Pressure equipment. Definition of parties involved
ISO14635-2 : 2004 EDTN.1 ISO14635-2 : 2004 EDTN.1. ISO14635-2 : 2004 Gears - FZG test procedures -. Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load- carrying capacity of high EP o
BS EN 60601-2-17:2004 BS EN 60601-2-17:2004. Medical electrical equipment. Particular requirements for the safety of automatically-controlled brachytherapy afterloading equipment
BS EN 60749-2:2002 BS EN 60749-2:2002. Semiconductor devices. Mechanical and climatic test methods. Low air pressure
BS EN 60749-4:2002 BS EN 60749-4:2002. Semiconductor devices. Mechanical and climatic test methods. Damp heat, steady state, highly accelerated stress test (HAST)
BS EN 60749-9:2002 BS EN 60749-9:2002. Semiconductor devices. Mechanical and climatic test methods. Permanence of marking
BS EN 60749-12:2002 BS EN 60749-12:2002. Semiconductor devices. Mechanical and climatic test methods. Vibration, variable frequency
DD CEN/TS 764-6:2004 DD CEN/TS 764-6:2004. Pressure equipment. Structure and content of operating instructions
BS ISO 16269-8:2004 BS ISO 16269-8:2004. Statistical interpretation of data. Determination of prediction intervals
BS EN 60512-25-7:2005 BS EN 60512-25-7:2005. Connectors for electronic equipment. Tests and measurements. Test 25g. Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
BS EN 60512-25-6:2004 BS EN 60512-25-6:2004. Connectors for electronic equipment. Tests and measurements. Test 25f. Eye pattern and jitter
BS EN ISO 10271:2001 BS EN ISO 10271:2001. Dental metallic materials. Corrosion test methods
PAS 51:2004 PAS 51:2004. Guide to industry best practice for organizing outdoor events
BS EN ISO 3107:2004 BS EN ISO 3107:2004. Dentistry. Zinc oxide/eugenol and zinc oxide/non-eugenol cements
BS ISO 687:2004 BS ISO 687:2004. Solid mineral fuels. Coke. Determination of moisture in the general analysis test sample
BS EN 10219-1:2006 BS EN 10219-1:2006. Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements
BS EN 10219-2:2006 BS EN 10219-2:2006. Cold formed welded structural hollow sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties
ISO16100-1 : 2002 EDTN 1 ISO16100-1 : 2002 EDTN 1. ISO16100-1 : 2002 Industrial automation systems and integration - Manufacturing software capability profiling -. Part 1: Framework for interoperabili
BS EN ISO 11674:2001 BS EN ISO 11674:2001. Ships and marine technology. Heading control systems
BS EN ISO 11542-1:2001 BS EN ISO 11542-1:2001. Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 18609:2001, BS 684-2.51:2001 BS EN ISO 18609:2001, BS 684-2.51:2001. Animal and vegetable fats and oils. Determination of unsaponifiable matter. Method using hexane extraction
BS EN ISO 3596:2001, BS 684-2.7:2001 BS EN ISO 3596:2001, BS 684-2.7:2001. Animal and vegetable fats and oils. Determination of unsaponifiable matter. Method using diethyl ether extraction
BS EN 13024-1:2002 BS EN 13024-1:2002. Glass in building. Thermally toughened borosilicate safety glass. Definition and description
BS 7998-3:2002, IEC 60027-3:2002 BS 7998-3:2002, IEC 60027-3:2002. Letter symbols to be used in electrical technology. Logarithmic and related quantities, and their units
PD R217-020:2002, CENELEC Report R217-020:2001 PD R217-020:2002, CENELEC Report R217-020:2001. Electronic system specification languages. VHDL modelling guidelines
PD R217-021:2002, CENELEC Report R217-021:2001 PD R217-021:2002, CENELEC Report R217-021:2001. Electronic system specification languages. Standard method for building VHDL models of component librarie
BS EN 60974-5:2002, IEC 60974-5:2002 BS EN 60974-5:2002, IEC 60974-5:2002. Arc welding equipment. Wire feeders
BS EN 14225-1:2005 BS EN 14225-1:2005. Diving suits. Wet suits. Requirements and test methods
BS EN 14225-2:2005 BS EN 14225-2:2005. Diving suits. Dry suits. Requirements and test methods
BS EN 14360:2004 BS EN 14360:2004. Protective clothing against rain. Test method for ready made garments. Impact from above with high energy droplets
BS EN ISO 9886:2001 BS EN ISO 9886:2001. Evaluation of thermal strain by physiological measurements
BS EN 13600:2002 BS EN 13600:2002. Copper and copper alloys. Seamless copper tubes for electrical purposes
BS EN ISO 15487:2001 BS EN ISO 15487:2001. Textiles. Method for assessing appearance of apparel and other textile end products after domestic washing and drying
BS EN 13601:2002 BS EN 13601:2002. Copper and copper alloys. Copper rod, bar and wire for general electrical purposes
BS EN 13602:2002 BS EN 13602:2002. Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors
BS EN 13603:2002 BS EN 13603:2002. Copper and copper alloys. Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
BS EN ISO 15087-1:2001 BS EN ISO 15087-1:2001. Dental elevators. General requirements
BS ISO 20022-2:2004 BS ISO 20022-2:2004. Financial services. UNIversal Financial Industry message scheme. Roles and responsibilities of the registration bodies
BS EN ISO 14257:2001 BS EN ISO 14257:2001. Acoustics. Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance
BS EN 62209-1:2006 BS EN 62209-1:2006. Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices. Human models, instrumentation, and procedures. Procedure
BS EN 62226-1:2005 BS EN 62226-1:2005. Exposure to electric or magnetic fields in the low and intermediate frequency range. Methods for calculating the current density and internal electric field indu
PD CR 14376:2002 PD CR 14376:2002. Adhesives. Ahesives for paper and board, packaging and disposable sanitary products. Description and assessment of the setting process
DD IEC/TS 61094-7:2006 DD IEC/TS 61094-7:2006. Measurement microphones. Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones
BS EN 60118-4:2006 BS EN 60118-4:2006. Electroacoustics. Hearing aids. Induction loop systems for hearing aid purposes. Magnetic field strength
BS EN 50363-0:2005 BS EN 50363-0:2005. Insulating, sheathing and covering materials for low voltage energy cables. General introduction
BS EN 50363-1:2005 BS EN 50363-1:2005. Insulating, sheathing and covering materials for low voltage energy cables. Cross-linked elastomeric insulating compounds
BS EN 50363-2-1:2005 BS EN 50363-2-1:2005. Insulating, sheathing and covering materials for low-voltage energy cables. Cross-linked elastomeric sheathing compounds
BS EN 50363-2-2:2005 BS EN 50363-2-2:2005. Insulating, sheathing and covering materials for low voltage energy cables. Cross-linked elastomeric covering compounds
BS EN 50363-3:2005 BS EN 50363-3:2005. Insulating, sheathing and covering materials for low voltage energy cables. PVC insulating compounds
BS EN 50363-4-1:2005 BS EN 50363-4-1:2005. Insulating, sheathing and covering materials for low voltage energy cables. PVC sheathing compounds
BS EN 50363-4-2:2005 BS EN 50363-4-2:2005. Insulating, sheathing and covering materials for low voltage energy cables. PVC covering compounds
BS IEC 60748-23-1:2002 BS IEC 60748-23-1:2002. Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certification. Generic specification
BS EN 50363-5:2005 BS EN 50363-5:2005. Insulating, sheathing and covering materials for low voltage energy cables. Halogen-free, cross-linked insulating compounds
BS IEC 60748-23-2:2002 BS IEC 60748-23-2:2002. Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certification. Internal visual inspection
BS EN 1503-4:2002 BS EN 1503-4:2002. Valves. Materials for bodies, bonnets and covers. Copper alloys specified in European Standards
BS EN 50363-6:2005 BS EN 50363-6:2005. Insulating, sheathing and covering materials for low-voltage energy cables. Halogen-free, cross-linked sheathing compounds
BS EN 61076-3-104:2003 BS EN 61076-3-104:2003. Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors. Detail spe
BS 5268-6.2:2001 BS 5268-6.2:2001. Structural use of timber. Code of practice for timber frame walls. Buildings other than dwellings not exceeding four storeys
BS EN 50363-7:2005 BS EN 50363-7:2005. Insulating, sheathing and covering materials for low voltage energy cables. Halogen-free, thermoplastic insulating compounds
BS EN 12846:2002, BS 2000-484:2003 BS EN 12846:2002, BS 2000-484:2003. Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of efflux time of bitumen emulsions
BS ISO 16832:2006 BS ISO 16832:2006. Acoustics. Loudness scaling by means of categories
06/30065340 DC 06/30065340 DC. ISO 7849. Acoustics. Determination of airborne sound power levels emitted by machinery using vibration measurement. Part 1. Survey method using a fixed radiation faxtor
BS EN 50363-8:2005 BS EN 50363-8:2005. Insulating, sheathing and covering materials for low voltage energy cables. Halogen-free, thermoplastic sheathing compounds
BS EN 50363-9-1:2005 BS EN 50363-9-1:2005. Insulating, sheathing and covering materials for low-voltage energy cables. Miscellaneous insulating compounds. Cross-linked polyvinyl chloride (XLPVC)
BS EN 50363-10-1:2005 BS EN 50363-10-1:2005. Insulating, sheathing and covering materials for low-voltage energy cables. Miscellaneous sheathing compounds. Cross-linked polyvinyl chloride (XLPVC)
BS EN 50363-10-2:2005 BS EN 50363-10-2:2005. Insulating, sheathing and covering materials for low-voltage energy cables. Miscellaneous sheathing compounds. Thermoplastic polyurethane
BS EN 12847:2002, BS 2000-485:2003 BS EN 12847:2002, BS 2000-485:2003. Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of settling tendency of bitumen emu
BS EN 12848:2002, BS 2000-486:2003 BS EN 12848:2002, BS 2000-486:2003. Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of mixing stability with cement of
BS EN 12849:2002, BS 2000-487:2003 BS EN 12849:2002, BS 2000-487:2003. Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of penetration power of bitumen emu
PP 8888-1:2001 PP 8888-1:2001. Engineering drawing practice. Part 1: A guide for schools and colleges to BS 8888:2001. Technical product documentation
BS EN 12850:2002, BS 2000-488:2003 BS EN 12850:2002, BS 2000-488:2003. Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the pH value of bitumen emulsion
BS EN 13774:2003 BS EN 13774:2003. Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements
03/110340 DC 03/110340 DC. BS EN 131-2. Ladders. Part 2. Requirements, testing, marking
ISO/IECTR15938-8 : 2002 EDTN 1 ISO/IECTR15938-8 : 2002 EDTN 1. ISO/IECTR15938-8 : 2002 Information technology- Multimedia content description interface. Part 8: Extraction and use of MPEG-7 descriptio
WD/ISO/IECTR14496-7 : 2002EDTN1 WD/ISO/IECTR14496-7 : 2002EDTN1. ISO/IECTR14496-7 : 2002 Information technology- Coding of audio-visual objects. Part 7: Optimised reference software for coding of audi
BS EN 130301:2002 BS EN 130301:2002. Harmonized system of quality assessment for electronic components. Blank Detail Specification. Aluminium electrolytic capacitors with non-solid electrolyte
DD ISO/TS 23556:2007 DD ISO/TS 23556:2007. Performance test method for diesel engine soot-removaldevices in lubricating oils. Initial filtration efficiency
BS ISO 13472-1:2002 BS ISO 13472-1:2002. Acoustics. Measurement of sound absorption properties of road surfaces in situ. Extended surface method
BS EN 61386-21:2004 BS EN 61386-21:2004. Conduit systems for cable management. Particular requirements. Rigid conduit systems
BS EN 61386-22:2004 BS EN 61386-22:2004. Conduit systems for cable management. Particular requirements. Pliable conduit systems
BS EN 61386-23:2004 BS EN 61386-23:2004. Conduit systems for cable management. Particular requirements. Flexible conduit systems
BS EN 3746:2003 BS EN 3746:2003. Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Hardness 80 IRHD
BS EN 3747:2003 BS EN 3747:2003. Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Technical specification
BS EN 10333:2005 BS EN 10333:2005. Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. Tin coated steel (tinpl
BS EN 10334:2005 BS EN 10334:2005. Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption. Non-coated steel (blac
BS EN 10335:2005 BS EN 10335:2005. Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. Non alloyed electrolyti
BS EN 3869:2003 BS EN 3869:2003. Aerospace series. Pipe couplings, loose flanges and seals. Seals in fluorocarbon rubber and armature in aluminium alloy
BS EN 318:2002 BS EN 318:2002. Wood based panels. Determination of dimensional changes associated with changes in relative humidity
BS EN 2002-2:2005 BS EN 2002-2:2005. Aerospace series. Metallic materials. Test methods. Tensile testing at elevated temperature
BS EN 500-1:2006 BS EN 500-1:2006. Mobile road construction machinery. Safety. Common requirements
BS EN 2703:2005 BS EN 2703:2005. Aluminium alloy AL-P2024-T4 or T42. Clad sheet and strip. 0,3 mm ≤ a ≤ 6 mm
BS EN 10325:2006 BS EN 10325:2006. Steel. Determination of yield strength increase by the effect of heat treatment (Bake-Hardening-Index)
ISO/TR17671-1 : 2002 EDTN 1 ISO/TR17671-1 : 2002 EDTN 1. ISO/TR17671-1 : 2002 Welding - Recommendations for welding of metallic materials. Part 1: General guidance for arc welding
ISO/TR17671-2 : 2002 EDTN 1 ISO/TR17671-2 : 2002 EDTN 1. ISO/TR17671-2 : 2002 Welding- Recommendations for welding of metallic materials. Part 2: Arc welding of ferritic steels
ISO/TR17671-3 : 2002 EDTN 1 ISO/TR17671-3 : 2002 EDTN 1. ISO/TR17671-3 : 2002 Welding- Recommendations for welding of metallic materials. Part 3: Arc welding of stainless steels
BS IEC 60748-23-3:2002 BS IEC 60748-23-3:2002. Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certification. Manufacturers' self-audit c
ISO/TR17671-4 : 2002 EDTN 1 ISO/TR17671-4 : 2002 EDTN 1. ISO/TR17671-4 : 2002 Welding- Recommendations for welding of metallic materials. Part 4: Arc welding of aluminium and aluminium alloys
BS EN 60684-3-216:2005 BS EN 60684-3-216:2005. Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, flame-retarded, limited-fire hazard sleeving
BS EN 60684-3-228:2004 BS EN 60684-3-228:2004. Flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving,
BS EN 60684-3-271:2004 BS EN 60684-3-271:2004. Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable elastomer sleeving, flame retarted, fluid resistant, shrin
ISO10303-21 : 2002 EDTN 2 ISO10303-21 : 2002 EDTN 2. ISO10303-21 : 2002 Industrial automation systems and integration- Product data representation and exchange-. Part 21: Implementation methods: Clear
EP 520 EP 520. Canopy Health and Safety Solution in a box
BS EN 2802:2005 BS EN 2802:2005. Aluminium alloy AL-P7475-T761. Sheet and strip. 0,6 mm ≤ a ≤ 6 mm
BS ISO 22702:2003 BS ISO 22702:2003. Utility lighters. General consumer-safety requirements
BS EN 2803:2005 BS EN 2803:2005. Aerospace series. Aluminium alloy AL-P7475-T761. Clad sheet and strip. 1,0 mm ≤ a ≤ 6 mm
BS ISO 16428:2005 BS ISO 16428:2005. Implants for surgery. Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices
BS EN 3332:2005 BS EN 3332:2005. Aerospace series. Aluminium alloy AL-P7475-T762. Clad sheet and strip. 1,0 mm≤ a ≤ 6 mm
BS EN 3333:2005 BS EN 3333:2005. Aluminium alloy AL-P7475-T762. Sheet and strip. 0,6 mm ≤ a ≤ 6 mm
BS EN 3335:2005 BS EN 3335:2005. Aluminium alloy AL-P7475-O2. Sheet for superplastic forming (SPF). 0,8 mm ≤ a ≤ 6 mm
BS EN 3341:2005 BS EN 3341:2005. Aluminium alloy AL-P6061-T4 or T42. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 3474:2005 BS EN 3474:2005. Aerospace series. Aluminium alloy AL-P2024-T81. Sheet and strip. 0,25 mm $3l a ≤ 6 mm
BS EN 3552:2005 BS EN 3552:2005. Aerospace series. Aluminium alloy AL-P2618A-T6 or T62. Clad sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 3872:2005 BS EN 3872:2005. Aerospace series. Aluminium alloy AL-R39002-H112. Die forgings. a ≤ 200mm
BS ISO 7176-24:2004 BS ISO 7176-24:2004. Wheelchairs. Requirements and test methods for user-operated stair-climbing devices
BS EN 3979:2005 BS EN 3979:2005. Aerospace series. Aluminium alloy AL-P8090-O2. Sheet for superplastic forming (SPF). 0,8 mm ≤ a ≤ 6 mm
BS EN 13564-1:2002 BS EN 13564-1:2002. Anti-flooding devices for buildings. Requirements
BS EN 13463-8:2003 BS EN 13463-8:2003. Non-electrical equipment for potentially explosive atmospheres. Protection by liquid immersion 'k'
ISO/IEC7816-4 : 2005 EDTN2 ISO/IEC7816-4 : 2005 EDTN2. ISO/IEC7816-4 : 2005 Identification cards - Integrated circuit cards -. Part 4: Organization, security and commands for interchange
ISO/IEC7816-9 : 2004 EDTN2 ISO/IEC7816-9 : 2004 EDTN2. ISO/IEC7816-9 : 2004 Identification cards -- Integrated cicuit cards --. Part 9: Commands for card management
PD IEC TR 61010-3-043:2002 PD IEC TR 61010-3-043:2002. Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-043:199
PDIEC/TR61010-3-043 : 2002 (DISKETTE) PDIEC/TR61010-3-043 : 2002 (DISKETTE).
PD IEC TR 61010-3-032:2002 PD IEC TR 61010-3-032:2002. Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-032:199
PDIEC/TR61010-3-032 : 2002 (DISKETTE) PDIEC/TR61010-3-032 : 2002 (DISKETTE).
BS EN 3997:2007 BS EN 3997:2007. Aerospace series. Aluminium alloy AL-P2024-T3. Sheet and strip 0,4 mm $3Q a $3Q 6 mm
BS EN 3998:2007 BS EN 3998:2007. Aerospace series. Aluminium alloy AL-P2024-T4 or T42. Sheet and strip. 0,3 mm ≤ a ≤ 6 mm
BS EN 4001:2007 BS EN 4001:2007. Aerospace series. Aluminium alloy AL-P2024-T351. Clad sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm
BS ISO 22643:2003 BS ISO 22643:2003. Space data and information transfer systems. Data entity dictionary specification language (DEDSL). XML/DTD Syntax
BS ISO 17355:2003 BS ISO 17355:2003. Space data and information transfer systems. CCSDS file delivery protocol
BS EN 4003:2006 BS EN 4003:2006. Aerospace series. Aluminium alloy AL-P2219-T87. Sheet and strip 0,5 mm ≤ a ≤ 6 mm
DD ENV 1452-6:2002 DD ENV 1452-6:2002. Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for installation
BS EN 4004:2007 BS EN 4004:2007. Aerospace series. Aluminium alloy AL-P3103-H16. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 4005:2007 BS EN 4005:2007. Aerospace series. Aluminium alloy AL-P5052-O. Sheet and strip 0,3 mm ≤ a ≤ 6 mm
BS EN 4006:2007 BS EN 4006:2007. Aerospace series. Aluminium alloy AL-P6082-T4 or T42. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS ISO 13419:2003 BS ISO 13419:2003. Space data and information transfer systems. Packet telemetry
BS ISO 12174:2003 BS ISO 12174:2003. Space data and information transfer systems. Telecommand. Architectural specification for the data management service
BS ISO 12173:2003 BS ISO 12173:2003. Space data and information transfer systems. Telecommand. Command operation procedures
BS ISO 12172:2003 BS ISO 12172:2003. Space data and information transfer systems. Telecommand. Data routing service
BS ISO 11754:2003 BS ISO 11754:2003. Space data and information transfer systems. Telemetry channel coding
BS ISO 17433:2003 BS ISO 17433:2003. Space data and information transfer systems. Packet telemetry services
BS EN 140401:2002 BS EN 140401:2002. Blank detail specification. Fixed low power non wire-wound surface mount (SMD) resistors
BS EN 10031:2003 BS EN 10031:2003. Semi finished products for forging. Tolerances on dimensions shape and mass
DD CEN/TS 1159-4:2004 DD CEN/TS 1159-4:2004. Advanced technical ceramics. Ceramic composites. Thermophysical properties. Determination of thermal conductivity
BS ISO 3977-4:2002 BS ISO 3977-4:2002. Gas turbines. Procurement. Fuels and environment
BS EN 12236:2002 BS EN 12236:2002. Ventilation for buildings. Ductwork hangers and supports. Requirements for strength
ISO/IEC7816-8 : 2004 EDTN2 ISO/IEC7816-8 : 2004 EDTN2. ISO/IEC 7816-8 : 2004 Identification cards -- Integrated circuit cards --. Part 8: Commands for security operaations
BS ISO 17101:2004 BS ISO 17101:2004. Agricultural machinery. Rotary and flail mowers. Thrown-object test and acceptance criteria
BS EN 10302:2002 BS EN 10302:2002. Creep resisting steels, nickel and cobalt alloys
BS EN 4007:2005 BS EN 4007:2005. Aerospace series. Aluminium alloy AL-P6082-T6 or T62. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 12201-4:2001 BS EN 12201-4:2001. Plastic piping systems for water supply. Polyethylene (PE). Valves
BS EN 4099:2005 BS EN 4099:2005. Aerospace series. Aluminium alloy AL-P2219-T6 or T62. Clad sheet and strip. 0,5 mm ≤ a ≤ 6 mm
BS EN 4100:2005 BS EN 4100:2005. Aerospace series. Aluminium alloy AL-P2219-T6 or T62. Sheet and strip. 0,5 mm ≤ a ≤ 6 mm
BS ISO/IEC 20968:2002 BS ISO/IEC 20968:2002. Software engineering. Mk II function point analysis. Counting practices manual
ISO/IEC7816-6 : 2004 EDTN 2 ISO/IEC7816-6 : 2004 EDTN 2. ISO/IEC7816-6 : 2004 Identification cards - Integrated circuit cards. Part 6: Interindustry data elements for interchange
BS ISO 2346:2001 BS ISO 2346:2001. Road vehicles. M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing
BS EN 4101:2005 BS EN 4101:2005. Aerospace series. Aluminium alloy AL-P2024-T4. Sheet and strip with improved stretch forming capability. 0,4 mm ≤ a ≤ 6 mm
BS EN 4102:2005 BS EN 4102:2005. Aerospace series. Aluminium alloy AL-P2219-T81. Clad sheet and strip. 0,5 mm ≤a ≤6 mm
BS EN 4202:2005 BS EN 4202:2005. Aerospace series. Aluminium alloy AL-P6082-T651. Plate. 6 mm <a ≤25 mm
BS EN 4203:2005 BS EN 4203:2005. Aerospace series. Aluminium alloy AL-P8090-T89. Sheet. 0,6 mm ≤ a ≤ 6 mm
BS EN 4204:2005 BS EN 4204:2005. Aerospace series. Aluminium alloy AL-P8090. T841. Sheet. 0,6 mm ≤ a ≤ 6 mm
BS EN 4209:2005 BS EN 4209:2005. Aerospace series. Aluminium alloy AL-P2219-T851. Plate. 6 mm <a ≤50 mm
BS EN 4211:2005 BS EN 4211:2005. Aerospace series. Aluminium alloy AL-P2024-T42. Clad plate. 6mm < a ≤ 25mm
ISO/IEC8824-1 : 2002 EDTN3 ISO/IEC8824-1 : 2002 EDTN3. ISO/IEC 8824-1 : 2003 EDTN3 Information technology - Abstract syntax notation one (ASN.1). Part 1: Specification of Basic Notation (ITU-T X.680)
BS EN 4212:2005 BS EN 4212:2005. Aerospace series. Aluminium alloy AL-P5086-H111. Plate. 6mm < a ≤8 0mm
BS EN 2731:2005 BS EN 2731:2005. Aerospace series. Magnesium alloy MG-C46001. T6. Sand casting
ISO/IEC8824-2 : 2002 EDTN3 ISO/IEC8824-2 : 2002 EDTN3. ISO/IEC 8824-2 : 2003 EDTN3 Information technology - Abstract syntax notation one (ASN.1). Part 2: Information Object Specification (ITU-T X.681)
BS EN 2732:2005 BS EN 2732:2005. Magnesium alloy MG-C46001-T6. Chill casting
ISO/IEC8824-3 : 2003 EDTN3 ISO/IEC8824-3 : 2003 EDTN3. ISO/IEC 8824-3 : 2003 EDTN 3 Information technology - Abstract syntax notation one (ASN.1) . Part 3: Constraint Specification (ITU-T X.682)
ISO/IEC8824-4 : 2002 EDTN3 ISO/IEC8824-4 : 2002 EDTN3. ISO/IEC 8824-4 : 2003 EDTN 3 Information technology - Abstract syntax notation one (ASN.1). Part 4: Parameterization of ASN.1 Specifications (ITU
ISO/IEC8825-1 : 2002 EDTN 3 ISO/IEC8825-1 : 2002 EDTN 3. ISO/IEC 8825-1: EDITION 3 Information technology - ASN.1 Encoding Rules. Part 1: Specification of Basic Encoding Rules (BER), Canonical Encodin
ISO/IEC8825-2 : 2002 EDTN3 ISO/IEC8825-2 : 2002 EDTN3. ISO/IEC 8825-2 : 2003 Information technology - ASN.1 Encoding Rules. Part 2: Specification of Packed Encoding Rules (PER) (ITU-T X.691)
BS ISO 15741:2001 BS ISO 15741:2001. Paints and varnishes. Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
BS EN 4213:2005 BS EN 4213:2005. Aerospace series. Aluminium alloy AL-P6061-T651. Plate. 6mm <a ≤ 80mm
BS EN 4214:2005 BS EN 4214:2005. Aerospace series. Aluminium alloy AL-P7010-T651. Plate. 6 mm <a ≤20 mm
BS EN 4215:2005 BS EN 4215:2005. Aerospace series. Aluminium alloy AL-P7175-T651. Plate. 6 mm <a ≤80 mm
BS ISO 8573-5:2001 BS ISO 8573-5:2001. Compressed air. Test methods for oil vapour and organic solvent content
BS EN 4247:2005 BS EN 4247:2005. Aerospace series. Aluminium alloy AL-P2024-T42. Plate. 6 mm <a ≤140 mm
BS EN ISO 10360-2:2002 BS EN ISO 10360-2:2002. Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs used for measuring size
BS EN 4283:2005 BS EN 4283:2005. Aerospace series. Aluminium alloy AL-P2219-T87. Plate. 6 mm < a ≤ 40 mm
BS EN 4286:2005 BS EN 4286:2005. Aerospace series. Aluminium alloy AL-P8090-T89. Die forgings. a ≤ 125 mm
BS EN 12642:2001 BS EN 12642:2001. Securing of cargo on road vehicles. Body structure of commercial vehicles. Minimum requirements
BS EN 4291:2005 BS EN 4291:2005. Aerospace series. Aluminium alloy AL-P8090. Forging stock
BS ISO 2939:2002 BS ISO 2939:2002. Cinematography. Picture image area on 35 mm motion-picture release prints. Position and dimensions
BS EN 4292:2005 BS EN 4292:2005. Aerospace series. Aluminium alloy AL-R39002. Forging stock
BS EN 4313:2005 BS EN 4313:2005. Aerospace series. Aluminium aloy AL-P6013-T6. Sheet and strip. 0,5 mm ≤a ≤6 mm
BS EN 4449:2005 BS EN 4449:2005. Aluminium alloy AL-P7050. T76. Sheet. 0,8 mm ≤ a ≤ 6 mm
BS EN 4450:2005 BS EN 4450:2005. Aerospace series. Aluminium alloy AL-P7050-T762. Sheet. 0,8 mm ≤a ≤6 mm
BS EN 62226-2-1:2005 BS EN 62226-2-1:2005. Exposure to electric or magnetic fields in the low and intermediate frequency range. Methods for calculating the current density and internal electric field
BS EN 61937-1:2003 BS EN 61937-1:2003. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC60958. General
BS EN 61937-2:2003 BS EN 61937-2:2003. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Burst-info
BS EN 61937-3:2003 BS EN 61937-3:2003. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the AC-3 format
BS EN 1870-7:2002 BS EN 1870-7:2002. Safety of woodworking machines. Circular sawing machines. Single blade log sawing machines with integrated feed table and manual loading and/or unloading
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
