BIS Standards Catalogue
ISO19220 : 2004 EDTN1 ISO19220 : 2004 EDTN1. ISO19220 : 2004 Plastic piping systems for soil and waste discharge (low and high temperature) inside buildings - Stryene copolymer blends (SAN + PVC)
BS EN ISO 9311-3:2005 BS EN ISO 9311-3:2005. Adhesives for thermoplastic piping systems. Test method for the determination of resistance to internal pressure
BS 7911:2003 BS 7911:2003. Specification for organizations conducting market research
BS EN ISO 15536-1:2005 BS EN ISO 15536-1:2005. Ergonomics. Computer manikins and body templates. General requirements
BS ISO 6989:1981 BS ISO 6989:1981. Textiles fibres. Determination of length and length distribution of staple fibres (by measurement of single fibres)
BS ISO 6939:1988 BS ISO 6939:1988. Textiles. Yarns from packages. Method of test for breaking strength of yarn by the skein method
ISO/ASTM51276 : 2002 EDTN2 ISO/ASTM51276 : 2002 EDTN2. ISO/ASTM51276 : 2002 Practice for use of a polymethylmethacrylate dosimetry system
BS G 264:2005 BS G 264:2005. Specification for avionic data transmission interface systems. Utilities bus
BS EN 12697-25:2005 BS EN 12697-25:2005. Bituminous mixtures. Test methods for hot mix asphalt. Cyclic compression test
BS EN ISO/IEC 15421:2002 BS EN ISO/IEC 15421:2002. Information technology. Automatic identification and data capture techniques. Bar code master test specifications
BS EN ISO/IEC 15419:2002 BS EN ISO/IEC 15419:2002. Information technology. Automatic identification and data capture techniques. Bar code digital imaging and printing performance testing
BS EN ISO 13567-2:2002 BS EN ISO 13567-2:2002. Technical product documentation. Organization and naming of layers for CAD. Concepts, format and codes used in construction documentation
BS EN ISO 13567-1:2002 BS EN ISO 13567-1:2002. Technical product documentation. Organization and naming of layers for CAD. Overview and principles
BS EN ISO 787-13:2002 BS EN ISO 787-13:2002. General methods of test for pigments and extenders. Determination of water-soluble sulfates, chlorides and nitrates
BS EN ISO 787-14:2002 BS EN ISO 787-14:2002. General methods of test for pigments and extenders. Determination of resistivity of aqueous extract
BS EN 60335-2-101:2002 BS EN 60335-2-101:2002. Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for vaporizers. Particular requ
PD IEC/TR 60725:2005 PD IEC/TR 60725:2005. Consideration on reference impedances and public supply network impedances for use in determinig disturbance characteristics of electrical equipment having a
BS EN ISO 9934-2:2002 BS EN ISO 9934-2:2002. Non-destructive testing. Magnetic particle testing. Detection media
PD IEC TR 61997:2001, IEC TR 61997:2001 PD IEC TR 61997:2001, IEC TR 61997:2001. Guidelines for the user interface in multimedia equipment for general purpose use
BS EN ISO/IEC 15416:2002 BS EN ISO/IEC 15416:2002. Information technology. Automatic identification and data capture techniques. Bar code print quality test specification. Linear symbols
BS EN 13084-8:2005 BS EN 13084-8:2005. Free-standing industrial chimneys. Design and execution of mast construction with satellite components
BS EN ISO 15537:2004 BS EN ISO 15537:2004. Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
ISO21049 : 2004 EDTN.1 ISO21049 : 2004 EDTN.1. ISO21049 : 2004 Pumps - Shaft sealing systems for centrifugal and rotary pumps
BS ISO 15314:2004 BS ISO 15314:2004. Plastics. Methods for marine exposure
BS ISO 9631:2004 BS ISO 9631:2004. Rubber seals. Joint rings for pipelines for hot water supply, drainage and sewerage pipelines up to 110°C. Specifications for the material
BS EN ISO 6185-2:2001 BS EN ISO 6185-2:2001. Inflatable boats. Boats with a maximum motor power rating of 4.5 kW to 15 kW inclusive
BS EN ISO 6185-1:2001 BS EN ISO 6185-1:2001. Inflatable boats. Boats with a maximum motor power rating of 4,5 kW
BS EN ISO 10441:2007 BS EN ISO 10441:2007. Petroleum, petrochemical and natural gas industries. Flexible couplings for mechanical power transmission. Special-purpose applications
BS EN ISO 6185-3:2001 BS EN ISO 6185-3:2001. Inflatable boats. Boats with maximum motor power rating of 15 kW and greater
PD CR 14311:2002 PD CR 14311:2002. Packaging. Marking and material identification system
BS ISO 6489-4:2004 BS ISO 6489-4:2004. Agricultural vehicles. Mechanical connections between towed and towing vehicles. Dimensions of piton-type coupling
BS ISO 5692-1:2004 BS ISO 5692-1:2004. Agricultural vehicles. Mechanical connections on towed vehicles. Dimensions for hitch-rings
BS ISO 11237-1:2005 BS ISO 11237-1:2005. Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification. Oil-based fluid applications
BS EN ISO 17292:2004 BS EN ISO 17292:2004. Metal ball valves for the petroleum, petrochemical and allied industries
BS ISO 10330:2002 BS ISO 10330:2002. Photography. Synchronizers, ignition circuits and connectors for cameras and photoflash units. Electrical characteristics and test methods
BS EN 61223-3-5:2004 BS EN 61223-3-5:2004. Evaluation and routine testing in medical imaging departments. Acceptance tests. Imaging performance of computed tomography X-ray equipment
BS EN ISO 14403:2002, BS 6068-2.75:2002 BS EN ISO 14403:2002, BS 6068-2.75:2002. Water quality. Determination of total cyanide and free cyanide by continuous flow analysis
DD IEC TS 60695-7-51:2002 DD IEC TS 60695-7-51:2002. Fire hazard testing. Toxicity of fire effluent. Estimation of toxic potency. Calculation and interpretation of test results
BS EN 175101-809:2004 BS EN 175101-809:2004. Harmonized system of quality assessment for electronic components. Detail specification. Two-part connectors for printed boards having a grid of 2,54 mm, s
BS EN 14447:2005 BS EN 14447:2005. Fibre reinforced plastics. Glass mat reinforced thermoplastics (GMT). Determination of flowability and solidification
DD CLC/TS 50217:2005 DD CLC/TS 50217:2005. Guide for in situ measurements. In situ measurement of disturbance emission
BS EN 55016-2-2:2004 BS EN 55016-2-2:2004. Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity - Measurement of distur
ISO10303-14 : 2005 EDTN1 ISO10303-14 : 2005 EDTN1. ISO10303-14 : 2005 Industrial automation systems and integration - Product data representation and exchange. Part 14: Description methods: The EXPRES
BS ISO 727-1:2002 BS ISO 727-1:2002. Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain socket
BS ISO 727-2:2002 BS ISO 727-2:2002. Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain socket
ISO17709 : 2004 EDTN1 ISO17709 : 2004 EDTN1. ISO17709 : 2004 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
DD CEN/TS 12390-9:2006 DD CEN/TS 12390-9:2006. Testing hardened concrete. Freeze-thaw resistance. Scaling
BS EN 14449:2005 BS EN 14449:2005. Glass in building. Laminated glass and laminated safety glass. Evaluation of conformity/product standard
ISO17706 : 2003 EDTN 1 ISO17706 : 2003 EDTN 1. ISO17706 : 2003 Footwear - Methods of test for uppers - Tensile strength and elongation
PD IEC TR 61282-5:2002 PD IEC TR 61282-5:2002. Fibre optic communication system design guides. Accommodation and compensation of dispersion
DD IEC/PAS 61499-4:2002 DD IEC/PAS 61499-4:2002. Function blocks for industrial-process measurement and control systems. Rules for compliance profiles
PAS 42:2002 PAS 42:2002. Method of test for establishing the efficiency of decorative fuel effect gas fires
BS EN 60505:2004 BS EN 60505:2004. Evaluation and qualification of electrical insulation systems
WD/ISO/IEC9594-9 : 2001 EDTN 3 WD/ISO/IEC9594-9 : 2001 EDTN 3. ISO/IEC9594-9 : 2001 Information technology- Open Systems Interconnection- The Directory: Replication.
BS ISO 12353-1:2002 BS ISO 12353-1:2002. Road vehicles. Traffic accident analysis. Vocabulary
ISO17705 : 2003 EDTN 1 ISO17705 : 2003 EDTN 1. ISO17705 :2003 Footwear - Methods of test for uppers, lining and insocks - Thermal insulation
ISO17703 : 2003 EDTN 1 ISO17703 : 2003 EDTN 1. ISO17703 : 2003 Footwear - Methods of test for uppers - High temperature behaviour
ISO17702 : 2003 EDTN 1 ISO17702 : 2003 EDTN 1. ISO17702 : 2003 Footwear - Methods of test for uppers - Water resistance
ISO17701 : 2003 EDTN 1 ISO17701 : 2003 EDTN 1. ISO17701 : 2003 Footwear - Methods of test for uppers, lining and insocks - Colour migration
ISO17698 : 2003 EDTN 1 ISO17698 : 2003 EDTN 1. ISO17698 : 2003 Footwear - Methods of test for uppers - Delamination resistance
ISO17695 : 2004 EDTN1 ISO17695 : 2004 EDTN1. ISO17695 : 2004 Footwear - Methods of test for uppers - Deformability
BS ISO/IEC 14143-2:2002 BS ISO/IEC 14143-2:2002. Information technology. Software measurement. Functional size measurement. Conformity evaluation of software size measurement methods to ISO/IEC 14143-
BS 2A 293:2005 BS 2A 293:2005. Procurement of self-locking nuts with non-metallic locking elements. Metric series. Specification
BS EN ISO 1120:2002 BS EN ISO 1120:2002. Conveyor belts. Determination of strength of mechanical fastenings. Static test method
BS EN 60286-6:2004 BS EN 60286-6:2004. Packaging of components for automatic handling. Bulk case packaging for surface mounting components
ISO/IEC16448 : 2002 EDTN 2 ISO/IEC16448 : 2002 EDTN 2. ISO/IEC 16448:2002 Information technology- 120 mm DVD- Read-only disk
ISO/IEC16449 : 2002 EDTN 2 ISO/IEC16449 : 2002 EDTN 2. ISO/IEC16449 : 2002 Information technology- 80 mm DVD- Read-only disk
BS EN 60384-23-1:2005 BS EN 60384-23-1:2005. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed metallized polyethylene naphthalate film dielectric chip d.c. capacitor
BS EN ISO 12217-3:2002 BS EN ISO 12217-3:2002. Small craft. Stability and buoyancy assessment and categorization. Boats of hull length less than 6 m
BS EN 60384-14-2:2004 BS EN 60384-14-2:2004. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors for electromagnetic interference suppression and connection
BS EN 60384-14-3:2004 BS EN 60384-14-3:2004. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors for electromagnetic interference suppression and connection
BS ISO 7507-1:2003 BS ISO 7507-1:2003. Petroleum and liquid petroleum products. Calibration of vertical cylindrical tanks. Strapping method
BS EN 1402-8:2003 BS EN 1402-8:2003. Unshaped refractory products. Determination of complementary properties
BS EN 1402-7:2003 BS EN 1402-7:2003. Unshaped refractory products. Tests on pre-formed shapes
BS EN 1402-4:2003 BS EN 1402-4:2003. Unshaped refractory products. Determination of consistency of castables
BS EN 60335-2-91:2003 BS EN 60335-2-91:2003. Specification for safety of household and similar electrical appliances. Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge
BS EN 14411:2003 BS EN 14411:2003. Ceramic tiles. Definitions, classification, characteristics and marking
BS ISO 7800:2003 BS ISO 7800:2003. Metallic materials. Wire. Simple torsion test
BS EN ISO 9513:2002 BS EN ISO 9513:2002. Metallic materials. Calibration of extensometers used in uniaxial testing
BS EN ISO 20844:2004 BS EN ISO 20844:2004. Petroleum and related products. Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
BS EN 13528-1:2002 BS EN 13528-1:2002. Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. General requirements
BS EN 13528-2:2002 BS EN 13528-2:2002. Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. Specific requirements and te
BS EN ISO 3758:2005 BS EN ISO 3758:2005. Textiles. Care labelling code using symbols
BS ISO 10771-1:2002 BS ISO 10771-1:2002. Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Test method
BS EN ISO 22868:2005 BS EN ISO 22868:2005. Forestry machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (grade 2 accuracy)
BS EN ISO 10432:2004 BS EN ISO 10432:2004. Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
BS ISO 22072:2005 BS ISO 22072:2005. Electrohydrostatic actuator (EHA). Characteristics to be defined in procurement specifications
BS EN ISO 105-P02:2004 BS EN ISO 105-P02:2004. Textiles. Tests for colour fastness. Colour fastness to pleating. Steam pleating
BS EN ISO 1:2002 BS EN ISO 1:2002. Geometrical Product Specifications (GPS). Standard reference temperature for geometrical product specification and verification
BS EN 80416-2:2001 BS EN 80416-2:2001. Basic principles for graphical symbols for use on equipment. Form and use of arrows
BS EN 3724:2003 BS EN 3724:2003. Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001 MoS2 coated. Classification: 1 100 MPa (at ambient temperature)
BS EN 3752:2003 BS EN 3752:2003. Aerospace series. Nuts, self-locking, MJ threads, in heat resisting steel FE-PA92HT (A286), MoS2 coated. Classification: 1100 MPa (at ambient temperature) / 425°C. Tec
BS EN 3818:2003 BS EN 3818:2003. Bolts with MJ threads, in titanium alloy TI-P64001. Classification:1100 MPa (at ambient temperature). Technical specification
BS EN 3851:2003 BS EN 3851:2003. Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Swivel nuts, straight
BS EN 3855:2002 BS EN 3855:2002. Aerospace series. Pipe couplings, 60° spherical, in titanium alloy TI-P64001. Caps
BS EN 3858:2002 BS EN 3858:2002. Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Thrust wires in steel FE-PA 13
BS EN 4011:2003 BS EN 4011:2003. Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy TI-P100HT (Inconel 718), silver plated. Classification: 1550 MPa (at ambient tem
BS EN 4013:2003 BS EN 4013:2003. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification: 1550 MPa (at ambient temperatur
ISO17064 : 2004 EDTN.1 ISO17064 : 2004 EDTN.1. ISO17064 : 2004 (HEADER) EDTN.1 Wood-based panels - Fireboard, particleboard and oriented strand board (OSB) - Vocabulary
BS 7976-2:2002 BS 7976-2:2002. Pendulum testers. Method of operation
BS EN 4051:2002 BS EN 4051:2002. Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy. Port connection
BS EN 4117:2003 BS EN 4117:2003. Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH 2601 (Inconel 718), silver plated on thread. Classification: 1 550 MPa (at
BS EN 4123:2003 BS EN 4123:2003. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread. Classification: 1550 MPa (at ambient
BS 7976-3:2002 BS 7976-3:2002. Pendulum testers. Method of calibration
BS ISO 18413:2002 BS ISO 18413:2002. Hydraulic fluid power. Cleanliness of parts and components. Inspection document and principles related to contaminant collection, analysis and data reporting
BS ISO 1268-6:2002 BS ISO 1268-6:2002. Fibre-reinforced plastics. Methods of producing test plates. Pultrusion moulding
BS EN 61010-2-061:2003 BS EN 61010-2-061:2003. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers wit
BS EN 61010-2-010:2003 BS EN 61010-2-010:2003. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for the heatin
ISO20509 : 2003 EDTN 1 ISO20509 : 2003 EDTN 1. ISO20509 : 2003 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of oxidation resistance of non-oxide monolithic ceramics
BS ISO 20508:2003 BS ISO 20508:2003. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of light transmittance of ceramic films with transparent substrate
BS 5400-2:2006 BS 5400-2:2006. Steel, concrete and composite bridges. Specification for loads
ISO20501 : 2003 (EDTN1) HEADER ISO20501 : 2003 (EDTN1) HEADER. ISO20501 : 2003 Fine ceramics (advanced ceramics, advanced technical ceramics) - Weibull statistics for strength data
ISO18756 : 2003 (EDTN1) HEADER ISO18756 : 2003 (EDTN1) HEADER. ISO18756 : 2003 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic cerami
BS ISO 10934-1:2002 BS ISO 10934-1:2002. Optics and optical instruments. Vocabulary for microscopy. Light microscopy
BS ISO 17381:2003, BS 6068-2.88:2003 BS ISO 17381:2003, BS 6068-2.88:2003. Water quality. Selection and application of ready-to-use test kit methods in water analysis
DD IEC/PAS 61290-3-1:2002 DD IEC/PAS 61290-3-1:2002. Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters. Optical spectrum analyzer
BS EN 60848:2002 BS EN 60848:2002. GRAFCET specification language for sequential function charts
BS ISO 17997-1:2004 BS ISO 17997-1:2004. Milk. Determination of casein-nitrogen content. Indirect method (Reference method)
BS ISO 17997-2:2004 BS ISO 17997-2:2004. Milk. Determination of casein-nitrogen content. Direct method
BS EN 14450:2005 BS EN 14450:2005. Secure storage units. Requirements, classification and methods of test for resistance to burglary. Secure safe cabinets
BS EN 12736:2001 BS EN 12736:2001. Electrically propelled road vehicles. Airborne acoustical noise of vehicle during charging with on-board chargers. Determination of sound power level
BS EN 50205:2002 BS EN 50205:2002. Relays with forcibly guided (mechanically linked) contacts
BS EN 892:2004 BS EN 892:2004. Mountaineering equipment. Dynamic mountaineering ropes. Safety requirements and test methods
BS ISO 9393-1:2004 BS ISO 9393-1:2004. Thermoplastics valves for industrial applications. Pressure test methods and requirements. General
PD TR 13480-7:2002 PD TR 13480-7:2002. Metallic industrial piping. Guidance on the use of conformity assessment procedures
BS EN ISO 580:2005 BS EN ISO 580:2005. Plastics piping and ducting systems. Injection-moulded thermoplastics fittings. Methods for visually assessing the effects of heating
BS EN 14460:2006 BS EN 14460:2006. Explosion resistant equipment
BS 1154:2003 BS 1154:2003. Natural rubber compounds. Specification
BS 1155:2003 BS 1155:2003. Natural rubber compounds for extrusion. Specification
BS 2752:2003 BS 2752:2003. Chloroprene rubber compounds. Specification
BS 3227:2003 BS 3227:2003. Butyl rubber compounds (including halobutyl compounds). Specification
BS ISO 4156-1:2005 BS ISO 4156-1:2005. Straight cylindrical involute splines. Metric module, side fit. Generalities
BS ISO 4156-2:2005 BS ISO 4156-2:2005. Straight cylindrical involute splines. Metric module, side fit. Dimensions
BS ISO 4156-3:2005 BS ISO 4156-3:2005. Straight cylindrical involute splines. Metric module, side fit. Inspection
BS ISO 11783-7:2002 BS ISO 11783-7:2002. Tractors and machinery for agriculture and forestry. Serial control and communications data network. Implement messages application layer
BS EN ISO 16201:2006 BS EN ISO 16201:2006. Technical aids for disabled persons. Environmental control systems for daily living
ISO17055 : 2002 EDTN 1 ISO17055 : 2002 EDTN 1. ISO17055 : 2002 Steel -Determination of silicon content Inductively coupled plasma atomic emission spectrometric method
ISO10333-4 : 2002 EDTN 1 ISO10333-4 : 2002 EDTN 1. ISO10333-4 : 2002 Personal fall arrest systems. Part 4: Vertical rails and vertical lifelines incorporating a sliding-type fall arrester
BS EN 14452:2005 BS EN 14452:2005. Devices to prevent pollution by backflow of potable water. Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20. Family D, t ype B
BS EN 14455:2005 BS EN 14455:2005. Devices to prevent pollution by backflow of potable water. Pressurised air inlet valves DN 15 to DN 50. Family L, type A and type B
QMS BOXED SET QMS BOXED SET. Quality management systems boxed set
DD CEN ISO/TS 14907-1:2005 DD CEN ISO/TS 14907-1:2005. Road transport and traffic telematics. Electronic fee collection. Test procedures for user and fixed equipment. Description of test procedures
BS EN 1942:2003 BS EN 1942:2003. Self adhesive tapes. Measurement of thickness
HB 10211:2002 HB 10211:2002. Marking Systems for Plastics Materials
KIT 103 KIT 103. Markings for plastics
KIT 104 KIT 104. Essentials of plastics marking
BS EN 14410:2003 BS EN 14410:2003. Self adhesive tapes. Measurement of breaking strength and elongation at break
BS EN ISO 20643:2005 BS EN ISO 20643:2005. Mechanical vibration. Hand-held and hand-guided machinery. Principles for evaluation of vibration emission
BS EN 61811-50:2002 BS EN 61811-50:2002. Electromechanical all-or-nothing relays. Sectional specification. Electromechanical all-or-nothing telecom relays of assessed quality
BS EN ISO 14816:2005 BS EN ISO 14816:2005. Road transport and traffic telematics. Automatic vehicle and equipment identification. Numbering and data structure
BS EN ISO 14815:2005 BS EN ISO 14815:2005. Road transport and traffic telematics. Automatic vehicle and equipment identification. System specifications
BS EN 12697-9:2002 BS EN 12697-9:2002. Bituminous mixtures. Test methods for hot mix asphalt. Determination of the reference density
BS EN 61811-51:2002 BS EN 61811-51:2002. Electromechanical all-or-nothing relays. Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Non-standardized type
BS EN 61811-52:2002 BS EN 61811-52:2002. Electromechanical all-or-nothing relays. Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over conta
BS EN 61811-53:2002 BS EN 61811-53:2002. Electromechanical all-or-nothing relays. Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over conta
BS EN 61811-54:2002 BS EN 61811-54:2002. Electromechanical non-specified time all-or-nothing relays of assessed quality. Blank detail specification. Electromechanical all-or-nothing telecom relays of
BS EN 61811-55:2002 BS EN 61811-55:2002. Electromechanical non-specified time all-or-nothing relays of assessed quality. Blank detail specification. Electromechanical all-or-nothing telecom relays of
BS EN 60384-21:2004 BS EN 60384-21:2004. Fixed capacitors for use in electronic equipment. Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
BS EN ISO 1735:2004 BS EN ISO 1735:2004. Cheese and processed cheese products. Determination of fat content. Gravimetric method (Reference method)
BS EN 60384-21-1:2004 BS EN 60384-21-1:2004. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1. Ass
BS EN 1870-6:2002 BS EN 1870-6:2002. Safety of woodworking machines. Circular sawing machines. Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw
BS EN 60384-22:2004 BS EN 60384-22:2004. Fixed capacitors for use in electronic equipment. Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
BS EN 60384-22-1:2004 BS EN 60384-22-1:2004. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2. Ass
BS EN 13149-1:2004 BS EN 13149-1:2004. Public transport. Road vehicle scheduling and control systems. WORLDFIP definition and application rules for onboard-data transmission
BS ISO 14952-6:2003 BS ISO 14952-6:2003. Space systems. Surface cleanliness of fluid systems. Precision-cleaning processes
BS ISO 14952-5:2003 BS ISO 14952-5:2003. Space systems. Surface cleanliness of fluid systems. Drying processes
BS ISO 14952-4:2003 BS ISO 14952-4:2003. Space systems. Surface cleanliness of fluid systems. Rough-cleaning processes
BS ISO 14952-3:2003 BS ISO 14952-3:2003. Space systems. Surface cleanliness of fluid systems. Analytical procedures for the determination of nonvolatile residues and particulate contamination
BS ISO 14952-2:2003 BS ISO 14952-2:2003. Space systems. Surface cleanliness of fluid systems. Cleanliness levels
BS ISO 14952-1:2003 BS ISO 14952-1:2003. Space systems. Surface cleanliness of fluid systems. Vocabulary
BS EN 14414:2004 BS EN 14414:2004. Geosynthetics. Screening test method for determining chemical resistance for landfill applications
BS EN 14415:2004 BS EN 14415:2004. Geosynthetic barriers. Test method for determining the resistance to leaching
DD CEN/TS 14416:2005 DD CEN/TS 14416:2005. Geosynthetic barriers. Test method for determining the resistance to roots
DD CEN/TS 14417:2005 DD CEN/TS 14417:2005. Geosynthetic barriers. Test method for the determination of the influence of wetting/drying cycles on the permeability of clay geosynthetic barriers
BSEN50361 : 2001 with CD ROM CAD files BSEN50361 : 2001 with CD ROM CAD files.
DD CEN/TS 14418:2005 DD CEN/TS 14418:2005. Geosynthetic barriers. Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers
WD/ADM A6 : 2001 WD/ADM A6 : 2001. Safety devices against excess pressure MCR-safety devices
WD/ADM HP4 : 2001 WD/ADM HP4 : 2001. Test supervisors and testers in non-destructive testing
WD/ADM HP5/2 : 2001 WD/ADM HP5/2 : 2001. Manufacture and testing of joints Production testing of welds, Testing of base metal after postweld heat treatment
AD2000M HP7/3 : 2001 AD2000M HP7/3 : 2001. Heat treatment Austenitic steels
AD2000M HP8/1 : 2001 AD2000M HP8/1 : 2001. Testing of pressings made from steel, aluminium and aluminium alloys
AD2000M S3/1 : 2001 AD2000M S3/1 : 2001. General verification of stability for pressure vessels Vessels on skirt supports
WD/ADM S3/2 : 2001 WD/ADM S3/2 : 2001. Verification of load-carrying capacity for horizontal vessels on saddle supports
AD2000M S3/3 : 2001 AD2000M S3/3 : 2001. General verification of stability for pressure vessels Vessels with domed ends on feet
AD2000M S3/4 : 2001 AD2000M S3/4 : 2001. General verification of stability for pressure vessels Vessels with support brackets
AD2000M S3/6 : 2001 AD2000M S3/6 : 2001. General verification of stability for pressure vessels Vessels with nozzles subject to additional loadings
AD2000M W8 : 2001 AD2000M W8 : 2001. Clad steels
BS ISO 15323:2002 BS ISO 15323:2002. Dried milk protein products. Determination of nitrogen solubility index
BS ISO 5765-1:2002 BS ISO 5765-1:2002. Dried milk, dried ice-mixes and processed cheese. Determination of lactose content. Enzymatic method utilizing the glucose moiety of the lactose
BS ISO 5765-2:2002 BS ISO 5765-2:2002. Dried milk, dried ice-mixes and processed cheese. Determination of lactose content. Enzymatic method utilizing the galactose moiety of the lactose
BS ISO 6670:2002 BS ISO 6670:2002. Instant coffee. Sampling method for bulk units with liners
BS EN 62122:2002 BS EN 62122:2002. Methods of measurement for consumer-use digital VTRs. Electronic and mechanical performances
BS EN 13925-3:2005 BS EN 13925-3:2005. Non-destructive testing. X-ray diffraction from polycrystalline and amorphous materials. Instruments
BS EN 62219:2002 BS EN 62219:2002. Overhead electrical conductors. Formed wire, concentric lay, stranded conductors
BS ISO 10840:2003 BS ISO 10840:2003. Plastics. Guidance for the use of standard fire tests
BS EN 61977:2002, IEC 61977:2002 BS EN 61977:2002, IEC 61977:2002. Fibre optic filters. Generic specification
BS EN ISO 6321:2002, BS 684-1.3:2002 BS EN ISO 6321:2002, BS 684-1.3:2002. Animal and vegetable fats and oils. Determination of melting point in open capillary tubes (slip point)
BS EN ISO 14891:2002 BS EN ISO 14891:2002. Milk and milk products. Determination of nitrogen content. Routine method using combustion according to the Dumas principle
BS EN 60269-4-1:2002 BS EN 60269-4-1:2002. Low-voltage fuses. Supplementary requirements for fuse-links for the protection of semiconductor devices. Sections I to III: Examples of types of standardize
ISO17699 : 2003 EDTN 1 ISO17699 : 2003 EDTN 1. ISO17699 Footwear - Test methods for uppers and lining - Water vapour permeability and absorption
BS EN 10314:2002 BS EN 10314:2002. Method for the derivation of minimum values of proof strength of steel at elevated temperatures
BS EN ISO 15587-1:2002, BS 6068-2.76:2002 BS EN ISO 15587-1:2002, BS 6068-2.76:2002. Water quality. Digestion for the determination of selected elements in water. Aqua regia digestion
ISO4633 : 2002 EDTN 3 ISO4633 : 2002 EDTN 3. ISO4633 : 2002 Rubber seals- Joint rings for water supply, drainage and sewerage pipelines- Specification for materials
DD IEC/PAS 61162-100:2002 DD IEC/PAS 61162-100:2002. Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Single talker and multiple listeners. Extra requirements to I
BS EN 13878:2003 BS EN 13878:2003. Leisure accommodation vehicles. Terms and definitions
BS EN 14042:2003 BS EN 14042:2003. Workplace atmospheres. Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents
BS EN 13857-3:2002 BS EN 13857-3:2002. Explosives for civil uses. Information to be provided by the manufacturer or his authorised representative to the user
BS EN 61193-1:2002, IEC 61193-1:2001 BS EN 61193-1:2002, IEC 61193-1:2001. Quality assessment systems. Registration and analysis of defects on printed board assemblies
BS EN 12697-7:2002 BS EN 12697-7:2002. Bituminous mixtures. Test methods for hot mix asphalt. Determination of the bulk density of bituminous specimens by gamma rays
BS EN 12697-29:2002 BS EN 12697-29:2002. Bituminous mixtures. Test methods for hot mix asphalt. Determination of the dimensions of a bituminous specimen
BS EN ISO 10539:2002 BS EN ISO 10539:2002. Animal and vegetable fats and oils. Determination of alkalinity
BS EN ISO 13438:2004 BS EN ISO 13438:2004. Geotextiles and geotextile-related products. Screening test method for determining the resistance to oxidation
BS EN 61300-2-44:2005 BS EN 61300-2-44:2005. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Flexing of the strain relief of fibre optic devic
BS EN 12484-4:2002 BS EN 12484-4:2002. Irrigation techniques. Automatic turf irrigation systems. Installation and acceptance
DD IEC/PAS 61300-3-35:2002 DD IEC/PAS 61300-3-35:2002. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Fibre optic cyl
BS EN 14227-5:2004 BS EN 14227-5:2004. Hydraulically bound mixtures. Specifications. Hydraulic road binder bound mixtures
PAS 54:2003 PAS 54:2003. Specification for domestic ceramicware and glassware. Articles intended for contact with foodstuffs, and vases
KIT 105 KIT 105. Gaseous fire-extinguishing set
BS EN ISO 10328:2006 BS EN ISO 10328:2006. Prosthetics. Structural testing of lower-limb prostheses. Requirements and test methods
BS EN ISO 4545-1:2005 BS EN ISO 4545-1:2005. Metallic materials. Knoop hardness test. Test method
BS EN ISO 4545-2:2005 BS EN ISO 4545-2:2005. Metallic materials. Knoop hardness test. Verification and calibration of testing machines
BS EN ISO 5534:2004 BS EN ISO 5534:2004. Cheese and processed cheese. Determination of the total solids content (Reference method)
BS EN ISO 22523:2006 BS EN ISO 22523:2006. External limb prostheses and external orthoses. Requirements and test methods
BS EN ISO 7787-4:2002 BS EN ISO 7787-4:2002. Dental rotary instruments. Cutters. Miniature carbide laboratory cutters
BS EN ISO 4545-3:2005 BS EN ISO 4545-3:2005. Metallic materials. Knoop hardness test. Calibration of reference blocks
BS EN ISO 1519:2002, BS 3900-E1:2002 BS EN ISO 1519:2002, BS 3900-E1:2002. Paints and varnishes. Bend test (cylindrical mandrel)
BS EN ISO 4545-4:2005 BS EN ISO 4545-4:2005. Metallic materials. Knoop hardness test. Tables of hardness values
BS EN ISO 10451:2002 BS EN ISO 10451:2002. Dental implant systems. Contents of technical file
BS EN ISO 6508-1:2005 BS EN ISO 6508-1:2005. Metallic materials. Rockwell hardness test. Test method (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN ISO 6508-3:2005 BS EN ISO 6508-3:2005. Metallic materials. Rockwell hardness test. Calibration and reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
BS EN ISO 6508-2:2005 BS EN ISO 6508-2:2005. Metallic materials. Rockwell hardness test. Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
PD ISO/TS 12029:2002 PD ISO/TS 12029:2002. Electronic imaging. Forms design optimization for electronic image management
BS ISO 15348:2002 BS ISO 15348:2002. Pipework. Metal bellows expansion joints. General
BS EN 13287:2004 BS EN 13287:2004. Safety, protective and occupational footwear for professional use. Test method for slip resistance
BS EN 3853:2002 BS EN 3853:2002. Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Straight unions, threaded
BS EN 3854:2002 BS EN 3854:2002. Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Ferrules, welded
BS EN 3856:2002 BS EN 3856:2002. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Swivel nuts for thrust wire
BS EN 3857:2002 BS EN 3857:2002. Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Elbows 90°, welded
BS EN 3852:2002 BS EN 3852:2002. Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Straight unions, welded, threaded
BS EN 62231:2007 BS EN 62231:2007. Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria
BS EN 61937-6:2002 BS EN 61937-6:2002. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the MPEG-2 AAC format
BS EN 61937-5:2002 BS EN 61937-5:2002. Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the DTS (Digital Theater Systems)
BS ISO 611:2003 BS ISO 611:2003. Road vehicles. Braking of automotive vehicles and their trailers. Vocabulary
BS EN 14469-1:2004 BS EN 14469-1:2004. Pigments and extenders. Testing of colouring materials in plasticized polyvinyl chloride (PVC-P). Composition and preparation of basic mixtures
BS EN 14469-2:2004 BS EN 14469-2:2004. Pigments and extenders. Testing of colouring materials in plasticized polyvinyl chloride (PVC-P). Preparation of test specimens
BS EN 14469-3:2004 BS EN 14469-3:2004. Pigments and extenders. Testing of colouring materials in plasticized polyvinyl chloride (PVC-P). Determination of the relative tinting strength of white pigment
BS EN 14469-4:2004 BS EN 14469-4:2004. Pigments and extenders. Testing of colouring materials in plasticized polyvinyl chloride (PVC-P). Determination of bleeding of colouring materials
BS EN 717-1:2004 BS EN 717-1:2004. Wood-based panels. Determination of formaldehyde release. Formaldehyde emission by the chamber method
BS ISO 7425-1:1988 BS ISO 7425-1:1988. Hydraulic fluid power. Housing for elastomer-energized, plastic-faced seals. Dimensions and tolerances. Piston seal housings
BS ISO 7425-2:1989 BS ISO 7425-2:1989. Hydraulic fluid power. Housing for elastomer-energized, plastic-faced seals. Dimensions and tolerances. Rod seal housings
BS EN 60947-7-2:2002 BS EN 60947-7-2:2002. Specification for low-voltage switchgear and controlgear. Ancillary equipment. Protective conductor terminal blocks for copper conductors
BS EN 13315:2002 BS EN 13315:2002. Tanks for transport of dangerous goods. Service equipment for tanks. Gravity discharge coupler
BS EN ISO 15744:2002 BS EN ISO 15744:2002. Hand-held non-electric power tools. Noise measurement code. Engineering method (grade 2)
PD CEN/TR 14748:2004 PD CEN/TR 14748:2004. Non-destructive testing. Methodology for qualification of non-destructive tests
BS IEC 61892-1:2001 BS IEC 61892-1:2001. Mobile and fixed offshore units. Electrical installations. General requirements and conditions
BS EN ISO 228-1:2003 BS EN ISO 228-1:2003. Pipe threads where pressure-tight joints are not made on the threads. Dimensions, tolerances and designation
BS EN 13551:2003 BS EN 13551:2003. Inland navigation vessels. Vocabulary
BS EN ISO 228-2:2003 BS EN ISO 228-2:2003. Pipe threads where pressure-tight joints are not made on the threads. Verification by means of limit gauges
BS EN ISO 8166:2003 BS EN ISO 8166:2003. Resistance welding. Procedure for the evaluation of the life of spot welding electrodes using constant machine settings
BS EN 12446:2003 BS EN 12446:2003. Chimneys. Components. Concrete outer wall elements
BS EN 61754-21:2005 BS EN 61754-21:2005. Fibre optic connector interfaces. Type SMI connector family for plastic optical fibre
BS ISO 17631:2002 BS ISO 17631:2002. Ships and marine technology. Shipboard plans for fire protection, life-saving appliances and means of escape
BS ISO 13821:2001 BS ISO 13821:2001. Corrugated fibreboard. Determination of edgewise crush resistance. Waxed edge method
BS EN 61754-22:2005 BS EN 61754-22:2005. Fibre optic connector interfaces. Type F-SMA connector family
DD IEC/PAS 61300-3-29:2002 DD IEC/PAS 61300-3-29:2002. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Measurement tec
BS EN 14532-3:2004 BS EN 14532-3:2004. Welding consumables. Test methods and quality requirements. Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
BS EN 14532-1:2004 BS EN 14532-1:2004. Welding consumables. Test methods and quality requirements. Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
BS EN ISO 7711-3:2004 BS EN ISO 7711-3:2004. Dentistry. Diamond rotary instruments. Grit sizes, designation and colour code
BS ISO 19819:2004 BS ISO 19819:2004. Metallic materials. Tensile testing in liquid helium
BS EN 648:2003 BS EN 648:2003. Paper and board intended to come into contact with foodstuffs. Determination of the fastness of fluorescent whitened paper and board
BS EN 61019-1:2005 BS EN 61019-1:2005. Surface acoustic wave (SAW) resonators. Generic specification
BS ISO 12917-1:2002 BS ISO 12917-1:2002. Petroleum and liquid petroleum products. Calibration of horizontal cylindrical tanks. Manual methods
BS ISO 12917-2:2002 BS ISO 12917-2:2002. Petroleum and liquid petroleum products. Calibration of horizontal cylindrical tanks. Internal electro-optical distance-ranging method
BS EN ISO 6877:2006 BS EN ISO 6877:2006. Dentistry. Root-canal obturating points
BS EN 12380:2002 BS EN 12380:2002. Air admittance valves for drainage systems. Requirements, test methods and evaluation of conformity
BS EN 13101:2002 BS EN 13101:2002. Steps for underground man entry chambers. Requirements, marking, testing and evaluation of conformity
BS EN 62330-1:2004 BS EN 62330-1:2004. Helical-scan digital video cassette recording system using 12.65 mm (0,5 in) magnetic tape. Format HD-D5. VTR specifications
BS EN 60811-4-2:2004 BS EN 60811-4-2:2004. Insulating and sheathing materials of electric and optical cables. Common test methods. Methods specific to polyethylene and polypropylene compounds. Tensile
BS EN 62330-3:2004 BS EN 62330-3:2004. Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape. Format HD-D5. Data stream format
BS EN 62330-2:2004 BS EN 62330-2:2004. Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape. Format HD-D5. Compression format
BS EN 131201:2002 BS EN 131201:2002. Blank detail specification: fixed capacitors with metallized electrodes and polypropylene dielectric
BS EN 381-11:2002 BS EN 381-11:2002. Protective clothing for users of hand-held chain saws. Requirements for upper body protectors
BS EN 381-10:2002 BS EN 381-10:2002. Protective clothing for users of hand-held chain saws. Test method for upper body protectors
ISO7296-3 : 2006 EDTN1 ISO7296-3 : 2006 EDTN1. ISO 7296-3 Cranes - Graphical symbols -. Part 3: Tower cranes
BS EN 60282-1:2006 BS EN 60282-1:2006. High-voltage fuses. Current-limiting fuses
06/30075307 DC 06/30075307 DC. BS EN ISO 472. Plastics. Vocabulary
BS EN 131200:2002 BS EN 131200:2002. Harmonized system of quality assessment for electronic components. Sectional Specification. Fixed capacitors with metallized electrodes and polypropylene dielectri
BS EN 4530-001:2006 BS EN 4530-001:2006. Aerospace series. Sealing sleeves used in elements of connection. Technical specification
BS EN 4530-002:2006 BS EN 4530-002:2006. Aerospace series. Sealing sleeves used in elements of connection. List and utilization of sealing sleeves
BS EN 4530-005:2006 BS EN 4530-005:2006. Aerospace series. Sealing sleeves used in elements of connection. Sealing sleeves for external diameter cable 3 mm to 4.1 mm. Product standard
BS EN 4530-006:2006 BS EN 4530-006:2006. Aerospace series. Sealing sleeves used in elements of connection. Sealing sleeves for external diameter cable 4,68 mm to 5,05 mm. Product standard
BS EN ISO 15465:2004 BS EN ISO 15465:2004. Pipework. Stripwound metal hoses and hose assemblies
BS EN 60695-10-3:2002 BS EN 60695-10-3:2002. Fire hazard testing. Abnormal heat. Mould stress relief distortion test
BS EN 14474:2004 BS EN 14474:2004. Precast concrete products. Concrete with wood-chips as aggregate. Requirements and test methods
BS EN 14117:2004 BS EN 14117:2004. Products and systems for the protection and repair of concrete structures. Test methods. Determination of time of efflux of cementitious injection products
ISO10303-50 : 2002 EDTN 1 ISO10303-50 : 2002 EDTN 1. ISO10303-50 : 2002 Industrial automation systems and integration - Product data representation and exchange. Part 50: Integrated generic resource:
03/111497 DC 03/111497 DC. EN 12953-13. Shell boilers. Part 13. Operating instructions
BS EN ISO 15587-2:2002, BS 6068-2.77:2002 BS EN ISO 15587-2:2002, BS 6068-2.77:2002. Water quality. Digestion for the determination of selected elements in water. Nitric acid digestion
BS EN 14329:2004 BS EN 14329:2004. Inland navigation vessels. Installation of berths and loading areas
BS EN 14330:2003 BS EN 14330:2003. Inland navigation vessels. Studless anchor chain. Round steel link chain
BS 8416:2002 BS 8416:2002. Specification for hole-saws
BS EN 1939:2003 BS EN 1939:2003. Self adhesive tapes. Determination of peel adhesion properties
BS EN ISO 6874:2005 BS EN ISO 6874:2005. Dentistry. Polymer-based pit and fissure sealants
BS EN 13502:2002 BS EN 13502:2002. Chimneys. Requirements and test methods for clay/ceramic flue terminals
BS EN 61747-2-2:2004 BS EN 61747-2-2:2004. Liquid crystal display devices. Matrix colour LCD modules. Blank detail specification
BS EN 60749-23:2004 BS EN 60749-23:2004. Semiconductor devices. Mechanical and climatic test methods. High temperature operating life
BS EN 60749-33:2004 BS EN 60749-33:2004. Semiconductor devices. Mechanical and climatic test methods. Accelerated moisture resistance. Unbiased autoclave
PD 6545:2005 PD 6545:2005. Intended use of human head and ear simulators-guide
BS EN 61010-2-040:2005 BS EN 61010-2-040:2005. Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for sterilizers and washer-disinfectors
BS EN ISO 22000:2005 BS EN ISO 22000:2005. Food safety management systems. Requirements for any organization in the food chain
BS 7714:2005 BS 7714:2005. Care and handling of seals for fluid power applications. Guide
BS EN 60622:2003 BS EN 60622:2003. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-cadmium prismatic rechargeable single cells
BS EN 61951-2:2003 BS EN 61951-2:2003. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells. Nickel-metal hydride
BS EN 62133:2003 BS EN 62133:2003. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed secondary cells, and for batteries made fro
BS EN 61960:2004 BS EN 61960:2004. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications
BS EN 62259:2004 BS EN 62259:2004. Secondary cells and batteries containing alkaline or other non-acid electrolytes. Nickel-cadmium prismatic secondary single cells with partial gas recombination
BS EN 60086-2:2001 BS EN 60086-2:2001. Primary batteries. Physical and electrical specifications
BS EN 62281:2004 BS EN 62281:2004. Safety of primary and secondary lithium cells and batteries during transport
BS EN 1159-1:2003 BS EN 1159-1:2003. Advanced technical ceramics. Ceramic composites. Thermophysical properties. Determination of thermal expansion
BS EN 10330:2003 BS EN 10330:2003. Magnetic materials. Method of measurement of the coercivity of magnetic materials in an open circuit
BS EN ISO 20846:2004, BS 2000-490:2004 BS EN ISO 20846:2004, BS 2000-490:2004. Methods of test for petroleum and its products. BS 2000-490: Petroleum products. Determination of sulfur content of liqui
BS EN 60794-3-30:2003 BS EN 60794-3-30:2003. Optical fibre cables. Outdoor cables. Family specification for optical telecommunication cables for lake and river crossings
BS EN 60793-2:2004 BS EN 60793-2:2004. Optical fibres. Product specifications. General
BS EN 62271-101:2006 BS EN 62271-101:2006. High-voltage switchgear and controlgear. Synthetic testing
BS EN 10332:2003 BS EN 10332:2003. Magnetic materials. Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties
BS EN 10331:2003 BS EN 10331:2003. Magnetic materials. Specification for sintered soft magnetic materials
BS EN ISO 20847:2004, BS 2000-496:2004 BS EN ISO 20847:2004, BS 2000-496:2004. Methods of test for petroleum and its products. BS 2000-496. Petroleum products. Determination of the sulfur content of a
BS EN 62315-1:2003 BS EN 62315-1:2003. DTV profiles for uncompressed digital video interfaces. General
BS EN ISO 20884:2004, BS 2000-497:2004 BS EN ISO 20884:2004, BS 2000-497:2004. Methods of test for petroleum and its products. BS 2000-497. Determination of sulfur content of automotive fuels. Wavelen
BS EN ISO 15438:2003 BS EN ISO 15438:2003. Information technology. Automatic identification and data capture techniques. Bar code symbology specifications. PDF417
BS EN 62271-105:2003 BS EN 62271-105:2003. High-voltage switchgear and controlgear. Alternating current switch-fuse combinations
BS EN 13331-2:2002 BS EN 13331-2:2002. Trench lining systems. Assessment by calculation or test
BS ISO 3007:1999, BS 2000-69:2001 BS ISO 3007:1999, BS 2000-69:2001. Methods of test for petroleum and its products. BS 2000-69. Petroleum products. Determination of vapour pressure. Reid method
BS EN 62271-107:2005 BS EN 62271-107:2005. High-voltage switchgear and controlgear. Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV
BS EN 62271-200:2004 BS EN 62271-200:2004. High-voltage switchgear and controlgear. AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
BS EN 13146-1:2002 BS EN 13146-1:2002. Railway applications. Track. Test methods for fastening systems. Determination of longitudinal rail restraint
BS EN 13146-2:2002 BS EN 13146-2:2002. Railway applications. Track. Test methods for fastening systems. Determination of torsional resistance
BS EN 13146-3:2002 BS EN 13146-3:2002. Railway applications. Track. Test methods for fastening systems. Determination of attenuation of impact loads
BS EN ISO 13626:2004 BS EN ISO 13626:2004. Petroleum and natural gas industries. Drilling and production equipment. Drilling and well-servicing structures
BS EN 13146-5:2002 BS EN 13146-5:2002. Railway applications. Track. Test methods for fastening systems. Determination of electrical resistance
BS EN 13146-7:2002 BS EN 13146-7:2002. Railway applications. Track. Test methods for fastening systems. Determination of clamping force
BS ISO 14397-1:2002, BS 6911-15.1:2002 BS ISO 14397-1:2002, BS 6911-15.1:2002. Earth-moving machinery. Loaders and backhoe loaders. Calculation of rated operating capacity and test method for verifyin
BS ISO 14397-2:2002, BS 6911-15.2:2002 BS ISO 14397-2:2002, BS 6911-15.2:2002. Earth-moving machinery. Loaders and backhoe loaders. Test method for measuring breakout forces and lift capacity to maxim
DD IEC/TS 61400-14:2005 DD IEC/TS 61400-14:2005. Wind turbines. Declaration of apparent sound power level and tonality values
BS EN 61472:2004 BS EN 61472:2004. Live working. Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV. A method of calculation
BS EN 61189-2:2006 BS EN 61189-2:2006. Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Test methods for materials for interconnection structu
BS EN 62237:2005 BS EN 62237:2005. Live working. Insulating hoses with fittings for use with hydraulic tools and equipment
BS EN 60896-11:2003 BS EN 60896-11:2003. Stationary lead-acid batteries. General requirements and methods of test. Vented types. General requirements and methods of tests
BS EN 60896-22:2004 BS EN 60896-22:2004. Stationary lead-acid batteries. Valve regulated types. Requirements
BS EN 60870-5-101:2003 BS EN 60870-5-101:2003. Telecontrol equipment and systems. Transmission protocols. Companion standard for basic telecontrol tasks
BS EN 61850-6:2004 BS EN 61850-6:2004. Communication networks and systems in substations. Configuration description language for communication in electrical substations related to IEDs
BS EN 61850-8-1:2004 BS EN 61850-8-1:2004. Communication networks and systems in substations. Specific communication service mapping (SCSM). Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC
BS ISO 11359-3:2002 BS ISO 11359-3:2002. Plastics. Thermomechanical analysis (TMA). Determination of penetration temperature
BS EN 13719:2002 BS EN 13719:2002. Geotextiles and geotextile-related products. Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers
BS EN 60519-2:2006 BS EN 60519-2:2006. Safety in electroheat installations. Particular requirements for resistance heating equipment
BS EN 60519-3:2005 BS EN 60519-3:2005. Safety in electroheat installations. Particular requirements for induction and conduction heating and induction melting installations
BS EN ISO 9187-1:2003 BS EN ISO 9187-1:2003. Injection equipment for medical use. Ampoules for injectables
BS EN 61056-2:2003 BS EN 61056-2:2003. Portable lead-acid cells and batteries (valve-regulated types). Dimensions, terminals and marking
BS EN ISO 8536-1:2003 BS EN ISO 8536-1:2003. Infusion equipment for medical use. Infusion glass bottles
BS EN 61427:2005 BS EN 61427:2005. Secondary cells and batteries for photovoltaic energy systems (PVES). General requirements and methods of test
BS EN ISO 8420:2002 BS EN ISO 8420:2002. Animal and vegetable fats and oils. Determination of content of polar compounds
BS EN ISO 7287:2002 BS EN ISO 7287:2002. Graphical symbols for thermal cutting equipment
ISO20723 : 2004 EDTN1 ISO20723 : 2004 EDTN1. ISO20723 : 2004 Structural steels - Surface condition of hot-rolled sections - Delivery requirements
BS EN 60216-6:2004 BS EN 60216-6:2004. Electrical insulating materials. Thermal endurance properties. Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed
BS EN 60544-4:2003 BS EN 60544-4:2003. Electrical insulating materials. Determination of the effects of ionizing radiation. Classification system for service in radiation environments
BS EN 60544-5:2003 BS EN 60544-5:2003. Electrical insulating materials. Determination of the effects of ionizing radiation. Procedures for assessment of ageing in service
BS EN 60893-3-2:2004 BS EN 60893-3-2:2004. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requi
BS EN 14412:2004 BS EN 14412:2004. Indoor air quality. Diffusive samplers the determination of concentrations of gases and vapours. Guide for selection, use and maintenance
02/201465 DC 02/201465 DC. IEC 60092-508. Ed.1. Electrical installations in ships. Part 508: Switchgear and controlgear assemblies for rated voltages above 1kV and up to and including 15kV
BS EN 60684-3-214:2005 BS EN 60684-3-214:2005. Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, not flame retarted, shrink ratio 3:1
BS EN 61212-3-2:2006 BS EN 61212-3-2:2006. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual ma
BS EN 61212-3-3:2006 BS EN 61212-3-3:2006. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual ma
BS EN 61212-1:2006 BS EN 61212-1:2006. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Definitions, designations and genera
BS IEC 60092-506:2003 BS IEC 60092-506:2003. Electrical installations in ships. Special features. Ships carrying specific dangerous goods and materials hazardous only in bulk
BS EN 61212-2:2006 BS EN 61212-2:2006. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Methods of test
BS EN 61212-3-1:2006 BS EN 61212-3-1:2006. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual ma
BS EN 60454-3-2:2006 BS EN 60454-3-2:2006. Pressure-sensitive adhesive tapes for electrical purposes. Specifications for individual materials. Requirements for polyester film tapes with rubber thermos
BS EN 60794-4:2003 BS EN 60794-4:2003. Optical fibre cables. Sectional specification. Aerial optical cables along electrical power lines
PD IEC TR 62324:2003 PD IEC TR 62324:2003. Single-mode optical fibres. Raman gain efficiency measurement using continuous wave method. Guidance
BS 5516-1:2004 BS 5516-1:2004. Patent glazing and sloping glazing for buildings. Code of practice for design and installation of sloping and vertical patent glazing
BS 5516-2:2004 BS 5516-2:2004. Patent glazing and sloping glazing for buildings. Code of practice for sloping glazing
DD CLC/TS 60034-25:2005 DD CLC/TS 60034-25:2005. Rotating electrical machines. Guide for the design and performance of cage induction motors specifically designed for converter supply
BS EN 13100-3:2004 BS EN 13100-3:2004. Non-destructive testing of welded joints in thermoplastics semi-finished products. Ultrasonic testing
BS EN 60909-3:2003 BS EN 60909-3:2003. Short-circuit current calculation in three-phase a.c. systems. Currents during two separate simultaneous single phase line-to- earth short circuits and partial s
BS EN 60793-1-47:2002 BS EN 60793-1-47:2002. Optical fibres. Measurement methods and test procedures. Macrobending loss
BS EN ISO 1516:2002, BS 2000-491:2002 BS EN ISO 1516:2002, BS 2000-491:2002. Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method
BS ISO 11563:2003 BS ISO 11563:2003. Crude petroleum and petroleum products. Bulk cargo transfer. Guidelines for achieving the fullness of pipelines
BS EN 62309:2004 BS EN 62309:2004. Dependability of products containing reused parts. Requriements for functionality and tests
BS EN 13555:2004 BS EN 13555:2004. Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
BS ISO 14050:2002 BS ISO 14050:2002. Environmental management. Vocabulary
BS EN 993-20:2004 BS EN 993-20:2004. Methods of test for dense shaped refractory products. Determination of resistance to abrasion at ambient temperature
BS EN 13757-1:2002 BS EN 13757-1:2002. Communication system for meters and remote reading of meters. Data exchange
BS EN 50423-1:2005 BS EN 50423-1:2005. Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV. General requirements. Common specifications
BS ISO 4377:2002 BS ISO 4377:2002. Hydrometric determinations. Flow measurement in open channels using structures. Flat-V weirs
BS ISO 639-1:2002 BS ISO 639-1:2002. Codes for the representation of the names of languages. Alpha-2 code
BS EN ISO 21281:2005 BS EN ISO 21281:2005. Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks. Rules for the construction and layout of pedals
BS AU 257:2002 BS AU 257:2002. Code of practice for remanufacture of spark and compression ignition engines
BS EN ISO 140-11:2005 BS EN ISO 140-11:2005. Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurements of the reduction of transmitted impact sound by f
BS EN ISO 140-14:2004 BS EN ISO 140-14:2004. Acoustics. Measurement of sound insulation in buildings and of building elements. Guidelines for special situations in the field
BS EN 14456:2004 BS EN 14456:2004. Products used for treatment of water intended for human consumption. Bone charcoal
BS EN 878:2004 BS EN 878:2004. Chemicals used for treatment of water intended for human consumption. Aluminium sulfate
BS ISO 16702:2001 BS ISO 16702:2001. Workplace air quality. Determination of total isocyanate groups in air using 2-(1-methoxyphenyl) piperazine and liquid chromatography
ISO22878 : 2004 EDTN.1 ISO22878 : 2004 EDTN.1. ISO22878 : 2004 Castors and wheels - Test methods and apparatus
ISO22879 : 2004 EDTN.1 ISO22879 : 2004 EDTN.1. ISO22879 : 2004 Castors and wheels - Requirements for castors for furniture
ISO22880 : 2004 EDTN.1 ISO22880 : 2004 EDTN.1. ISO22880 : 2004 Castors and wheels - Requirements for castors for swivel chairs
ISO22881 : 2004 EDTN1 ISO22881 : 2004 EDTN1. ISO22881 : 2004 Castors and wheels - Requirements for use on manually propelled equipment for institutional applications
ISO22882 : 2004 EDTN.1 ISO22882 : 2004 EDTN.1. ISO22882 : 2004 Castors and wheels - Requirements for castors for hospital beds
ISO22883 : 2004 EDTN1 ISO22883 : 2004 EDTN1. ISO22883 : 2004 Castors and wheels -- Requirements for applicatios up to 1,1 m/s (4km/h)
ISO22884 : 2004 EDTN.1 ISO22884 : 2004 EDTN.1. ISO22884 : 2004 Castors and wheels - Requirements for applications over 1,1 m/s (4km/h) and up to 4,4 m/s (16km/h)
BS ISO 7743:2004 BS ISO 7743:2004. Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
BS ISO 7619-2:2004 BS ISO 7619-2:2004. Rubber, vulcanized or thermoplastic. Determination of indentation hardness. IRHD pocket meter method
BS EN 50249:2002 BS EN 50249:2002. Electromagnetic locators for buried pipes and cables. Performance and safety
PD IEC TR 60893-4:2003 PD IEC TR 60893-4:2003. Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Typical values
BS EN 61189-6:2006 BS EN 61189-6:2006. Test methods for electrical materials, interconnection structures and assemblies. Test methods for materials used in manufacturing electronic assemblies
BS ISO 14869-2:2002 BS ISO 14869-2:2002. Soil quality. Dissolution for the determination of total element content. Dissolution by alkaline fusion
BS ISO 8640-3:2002 BS ISO 8640-3:2002. Textile machinery and accessories. Flat warp knitting machines. Vocabulary. Vocabulary of patterning devices
BS EN 61290-1-3:2005 BS EN 61290-1-3:2005. Optical amplifiers. Test methods. Power and gain parameters. Optical power meter method
BS EN 13919:2002 BS EN 13919:2002. Natural stone test methods. Determination of resistance to ageing by SO2 action in the presence of humidity
BS EN 50370-1:2005 BS EN 50370-1:2005. Electromagnetic compatibility (EMC). Product family standard for machine tools. Emission
BS EN 55016-1-1:2007+A2:2008 BS EN 55016-1-1:2007+A2:2008. Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Measuri
BS EN 3726:2003 BS EN 3726:2003. Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-PA92HT (A286), MoS2 coated. Classification: 1 100 MPa (at ambient temperature)/425°C
BS EN 3741:2003 BS EN 3741:2003. Aerospace series. Nuts, clip, metric. Installation holes and assembly
BS EN 3831:2003 BS EN 3831:2003. Aerospace series. Inserts, thickwall, self-locking, in heat resisting steel FE-PM3801 (17-4PH), MoS2 coated
BS EN 3832:2003 BS EN 3832:2003. Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification: 1550 MPa (at am
BS EN 3833:2003 BS EN 3833:2003. Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1550 MPa (at ambient temperature) / 650°C. Technical
BS EN 3867:2003 BS EN 3867:2003. Aerospace series. Pipe couplings, loose flanges and seals. Flanges in titanium alloy TI-P64001
BS EN 3868:2003 BS EN 3868:2003. Aerospace series. Pipe couplings, loose flanges and seals. Flange connectors, welded, in titanium alloy TI-P64001
BS EN 3899:2003 BS EN 3899:2003. Aerospace series. Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH). Technical specification
BS EN 4009:2003 BS EN 4009:2003. Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification:
BS EN 4012:2003 BS EN 4012:2003. Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P100HT (Inconel 718), MoS2 coated. Classification: 1500 MPa (at ambient tempe
BS EN 4014:2003 BS EN 4014:2003. Aerospace series. Inserts, thickwall, self-locking. Design standard
BS EN 4015:2003 BS EN 4015:2003. Aerospace series. Inserts, thickwall, self-locking. Installation and removal procedure
BS EN 60684-3-211:2002 BS EN 60684-3-211:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable sleeving, semi-rigid polyole
BS EN 4054:2003 BS EN 4054:2003. Aerospace series. Pipe couplings, loose flanges and seals. Seals in fluorocarbon rubber and armature in aluminium alloy. Technical specification
BS EN 4116:2003 BS EN 4116:2003. Aerospace series. Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread. Classification: 1 100 MPa (at ambient temperature)/
BS EN 4118:2003 BS EN 4118:2003. Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread. Classification: 1 100 MPa (at ambient temperature
BS EN 4119:2003 BS EN 4119:2003. Aerospace series. Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated on thread. Classification: 1 100 MPa (at
BS EN 4121:2003 BS EN 4121:2003. Aerospace series. Shank nuts, serrated, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperatu
PD IEC TR 60825-14:2004 PD IEC TR 60825-14:2004. Safety of laser products. A user's guide
BS EN 4122:2003 BS EN 4122:2003. Aerospace series. Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature)/650°C
BS EN 4166:2003 BS EN 4166:2003. Aerospace series. Clips, spring tension, three parts. PTFE bushes
BS EN 4167:2003 BS EN 4167:2003. Aerospace series. Clips, spring tension, three parts. Inner clips in heat resisting steel FE-PA92HT (A286)
BS EN 4168:2003 BS EN 4168:2003. Aerospace series. Clips, spring tension, three parts. Outer clips in heat resisting steel FE-PA92HT (A286)
BS EN 4321:2003 BS EN 4321:2003. Aerospace series. Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickelbase alloy NI-PH2601 (Inconel 718), silver plate
BS EN 4352:2003 BS EN 4352:2003. Aerospace series. Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH 2601 (Inconel 718), MoS2 coate
BS EN 4549:2003 BS EN 4549:2003. Aerospace series. Pipe coupling, in heat resisting steel or in heat resisting nickel alloy. Coupling end, welded. Design configuration. Inch series
BS EN 4550-1:2003 BS EN 4550-1:2003. Aerospace series. Pipe coupling 37°. Design configuration. Inch series. Male sealing ends, spherical
BS EN 4550-2:2003 BS EN 4550-2:2003. Aerospace series. Pipe coupling 37°. Design configuration. Inch series. Port ends
BS EN 4550-3:2003 BS EN 4550-3:2003. Aerospace series. Pipe coupling 37°. Design configuration. Inch series. Port connections
BS EN 4550-4:2003 BS EN 4550-4:2003. Aerospace series. Pipe coupling 37°. Design configuration. Inch series. Female sealing ends
BS 8425:2003 BS 8425:2003. Code of practice for installation of laminate floor coverings
WD/ISO6914 : 2004 EDTN.2 WD/ISO6914 : 2004 EDTN.2. ISO6914 : 2004 Rubber, vulcanized or thermoplastic - Determination of ageing characteristics by measurement of stress relaxation
BS EN 3907:2003 BS EN 3907:2003. Aerospace series. Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS2 coated. Classification: 1100 MPa (at ambient temperature)/35
BS EN ISO 4126-6:2003 BS EN ISO 4126-6:2003. Safety devices for protection against excessive pressure. Application, selection and installation of bursting disc safety devices
BS EN 4124:2003 BS EN 4124:2003. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH-1302 (Waspaloy), silver plated on thread, for 60 swage. Classification: 1210 MPa
BS EN 61347-2-7:2006 BS EN 61347-2-7:2006. Lamp controlgear. Particular requirements for d.c. supplied electronic ballasts for emergency lighting
BS EN 4420:2003 BS EN 4420:2003. Aerospace series. Clips, spring tension, in alloy steel FE-PA3903
BS EN 4323:2003 BS EN 4323:2003. Aerospace series. Screws, 100° countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS2 coated. Classification: 900 MPa (at amb
BS EN 61048:2006 BS EN 61048:2006. Auxiliaries for lamps. Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements
BS EN 4322:2003 BS EN 4322:2003. Aerospace series. Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS2 coated. Strength class: 1100
BS ISO 15902:2004 BS ISO 15902:2004. Optics and photonics. Diffractive optics. Vocabulary
BS CISPR 16-4:2002 BS CISPR 16-4:2002. Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainty in EMC measurements
BS EN 1307:2005 BS EN 1307:2005. Textile floor coverings. Classification of pile carpets
BS EN 4551:2003 BS EN 4551:2003. Aerospace series. Pipe coupling 37°, in heat resisting steel. Swivel nuts. Inch series
BS EN 986:2005 BS EN 986:2005. Textile floor coverings. Tiles. Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
BS EN 12665:2002 BS EN 12665:2002. Light and lighting. Basic terms and criteria for specifying lighting requirements
BS EN 1318:2005 BS EN 1318:2005. Textile floor coverings. Determination of the apparent effective thickness of the backing
BS EN 4552:2003 BS EN 4552:2003. Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Straight nipples, welded end. Inch series
BS ISO 10390:2005 BS ISO 10390:2005. Soil quality. Determination of pH
BS ISO 16387:2004 BS ISO 16387:2004. Soil quality. Effects of pollutants on Enchytraeidae (Enchytraeus sp.). Determination of effects on reproduction and survival
BS EN 60444-7:2004 BS EN 60444-7:2004. Measurement of quartz crystal unit parameters. Measurement of activity and frequency dips of quartz crystal units
BS EN 4553:2003 BS EN 4553:2003. Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Elbow 90° nipples, welded end. Inch series
BS EN 4554:2003 BS EN 4554:2003. Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Straight unions, threaded. Inch series
BS ISO 24334:2006 BS ISO 24334:2006. Laminate floor coverings. Determination of locking strength for mechanically assembled panels
BS ISO 8660:2002 BS ISO 8660:2002. Plastics. Determination of permanganate absorption number of caprolactam. Spectrometric method
02/707771 DC 02/707771 DC. BS 192-1. Open-ended wrenches. Part 1: Unified sizes
02/707772 DC 02/707772 DC. BS 192-2. Open-ended wrenches. Part 2: BS/Whitworth sizes
02/707773 DC 02/707773 DC. BS 7586-1. Combination wrenches. Part 1: Unified sizes
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
