BIS Standards Catalogue
BS ISO 11357-6:2002 BS ISO 11357-6:2002. Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time
ISO10383 : 2003 EDTN 2 ISO10383 : 2003 EDTN 2. ISO10383 : 2003 Securities and related financial instruments- Codes for exchanges and market identification (MIC)
BS ISO 16820:2004 BS ISO 16820:2004. Sensory analysis. Methodology. Sequential analysis
PD IEC/TR 62195:2002 PD IEC/TR 62195:2002. Power system control and associated communications. Deregulated energy market communications
BS ISO 11003-1:2001 BS ISO 11003-1:2001. Adhesives. Determination of shear behaviour of structural adhesives. Torsion test method using butt-bonded hollow cylinders
BS 8420:2003 BS 8420:2003. Methods of measuring irregularities on surfaces of roads, footways and other paved areas using straightedges and wedges
BS EN ISO 7937:2004 BS EN ISO 7937:2004. Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of Clostridium perfringens. Colony-count technique
BS ISO 4649:2002 BS ISO 4649:2002. Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device
BS EN 480-13:2002 BS EN 480-13:2002. Admixtures for concrete, mortar and grout. Test methods. Reference masonry mortar for testing mortar admixtures
BS EN ISO 14224:2006 BS EN ISO 14224:2006. Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
BS ISO 11003-2:2001 BS ISO 11003-2:2001. Adhesives. Determination of shear behaviour of structural adhesives. Tensile test method using thick adherends
BS EN ISO 8256:2004 BS EN ISO 8256:2004. Plastics. Determination of tensile-impact strength
BS EN 13553:2002 BS EN 13553:2002. Resilient floor coverings. Polyvinyl chloride floor coverings for use in special wet areas. Specification
BS EN 1279-6:2002 BS EN 1279-6:2002. Glass in building. Insulating glass units. Factory production control and periodic tests
BS EN 1279-4:2002 BS EN 1279-4:2002. Glass in building. Insulating glass units. Methods of test for the physical attributes of edge seals
BS EN 140400:2003 BS EN 140400:2003. Harmonized system of quality assessment for electronic components. Sectional specification. Fixed low power surface mount (SMD) resistors
ISO/IEC9995-2 : 2002 EDTN 2 ISO/IEC9995-2 : 2002 EDTN 2. ISO/IEC9995-2 : 2002 Information technology -- Keyboard layouts for text and office systems --. Part 2: Alphanumeric section
PD 6627:2001 Issue 3.1 PD 6627:2001 Issue 3.1. PNO-ISC Information document number 007. UK Interconnect use of SCCP & MTP
BS EN 61514-2:2004 BS EN 61514-2:2004. Industrial process control systems. Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
BS 4164:2002 BS 4164:2002. Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer
ISO/IEC9995-4 : 2002 EDTN 2 ISO/IEC9995-4 : 2002 EDTN 2. ISO/IEC9995-4 : 2002 Information technology -- Keyboard layouts for text and office systems --. Part 4: Numeric section
BS EN 14385:2004 BS EN 14385:2004. Stationary source emissions. Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
BS EN 60873-2:2004 BS EN 60873-2:2004. Electrical and pneumatic analogue chart recorders for use in industrial process control systems. Guidance for inspection and routine testing
BS EN 60811-4-1:2004 BS EN 60811-4-1:2004. Insulating and sheathing materials of electric and optical cables. Common test methods. Methods specific to polypropylene and polypropylene compounds. Resist
BS EN 61003-1:2004 BS EN 61003-1:2004. Industrial-process control systems. Instruments with analogue inputs and two- or multi-state outputs. Methods of evaluating performance
ISO/IEC9995-3 : 2002 EDTN 2 ISO/IEC9995-3 : 2002 EDTN 2. ISO/IEC9995-3 : 2002 Information technology -- Keyboard layouts for text and office systems --. Part 3: Complementary layouts of the alphanumer
BS EN 12789:2002 BS EN 12789:2002. Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure. Determination of flexural strength
PD 6683:2001 PD 6683:2001. Specification Number DPNSS [188]. Digital Private Network Signalling System No 1
BS EN 14372:2004 BS EN 14372:2004. Child use and care articles. Cutlery and feeding utensils. Safety requirements and tests
ISO/IEC22050 : 2002 EDTN 1 ISO/IEC22050 : 2002 EDTN 1. ISO/IEC 22050 Information technology- Data interchange on 12,7 mm, 384-track magnetic tape cartridges -- Ultrium-1 format
ISO/IEC22051 : 2002 EDTN 1 ISO/IEC22051 : 2002 EDTN 1. ISO/IEC22051 : 2002 Information technology- Data interchange on 12,7 mm, 448-track magnetic tape cartridges- SDLT1 format
PD 6684:2001 PD 6684:2001. Specification number DPNSS [189]. Interworking between DPNSS 1 and other signalling systems
PD 6685:2001 PD 6685:2001. Specification Number DPNSS [189-I]. Interworking between DPNSS 1 and ISDN Signalling Systems
BS EN 13349:2002 BS EN 13349:2002. Copper and copper alloys. Pre-insulated copper tubes with solid covering
BS EN 14366:2004 BS EN 14366:2004. Laboratory measurement of noise from waste water installations
BS EN 13604:2002 BS EN 13604:2002. Copper and copper alloys. Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications
BS EN 13806:2002 BS EN 13806:2002. Foodstuffs. Determination of trace elements. Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after pressure digestion
BS EN 45510-4-4:2002 BS EN 45510-4-4:2002. Guide for the procurement of power station equipment. Boiler auxiliaries. Fuel preparation equipment
BS EN 45510-4-5:2002 BS EN 45510-4-5:2002. Guide for the procurement of power station equipment. Boiler auxiliaries. Coal handling and bulk storage plant
DD ENV 623-5:2002 DD ENV 623-5:2002. Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of phase volume fraction by evaluation of micrographs
BS EN 13863-4:2004 BS EN 13863-4:2004. Concrete pavements. Test methods for the determination of wear resistance of concrete pavements to studded tyres
BS EN 13286-49:2004 BS EN 13286-49:2004. Unbound and hydraulically bound mixtures. Accelerated swelling test for soil treated by lime and/or hydraulic binder
BS EN 13377:2002 BS EN 13377:2002. Prefabricated timber formwork beams. Requirements, classification and assessment
BS ISO 3063:2004 BS ISO 3063:2004. Oil of ylang-ylang (Cananga odorato (Lam) Hook.f.et.Thomson forma genuina
PD IEC TR 60870-1-5:2000 PD IEC TR 60870-1-5:2000. Telecontrol equipment and systems. General considerations. Influence of modem transmission procedures with scramblers on the data integrity of transm
BS ISO 4725:2004 BS ISO 4725:2004. Oil of cedarwood, Texas (Juniperus mexicana Schiede)
BS EN ISO 12216:2002 BS EN ISO 12216:2002. Small craft. Windows, portlights, hatches, deadlights and doors. Strength and watertightness requirements
BS EN 1639:2004 BS EN 1639:2004. Dentistry. Medical devices for dentistry. Instruments
BS EN 61920:2004 BS EN 61920:2004. Infrared free air applications
BS EN 1640:2004 BS EN 1640:2004. Dentistry. Medical devices for dentistry. Equipment
BS EN 61340-4-5:2004 BS EN 61340-4-5:2004. Electrostatics. Standard test methods for specific applications. Methods for characterizing the electrostatic protection of footwear and flooring in combinat
BS EN 1641:2004 BS EN 1641:2004. Dentistry. Medical devices for dentistry. Materials
BS EN 1642:2004 BS EN 1642:2004. Dentistry. Medical devices for dentistry. Dental implants
BS EN ISO 8536-4:2004 BS EN ISO 8536-4:2004. Infusion equipment for medical use. Infusion sets for single use, gravity feed
BS EN ISO 7726:2001 BS EN ISO 7726:2001. Ergonomics of the thermal environment. Instruments for measuring physical quantities
BS EN 15424:2007 BS EN 15424:2007. Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for
ISO13408-6 : 2005 EDTN1 ISO13408-6 : 2005 EDTN1. ISO13408-6 : 2005 Aseptic processing of health care products Part 6: Isolator systems
BS ISO/IEC 23270:2003 BS ISO/IEC 23270:2003. Information technology. C# Language Specification
ISO22958 : 2005 EDTN 1 ISO22958 : 2005 EDTN 1. ISO22958 : 2005 Textiles - Water resistance - Rain tests: exposure to horizontal water spray
BS EN 14370:2004 BS EN 14370:2004. Surface active agents. Determination of surface tension
BS EN 14371:2004 BS EN 14371:2004. Surface active agents. Determination of foamability and degree of foamability. Circulation test method
02/101755 DC 02/101755 DC. prEN 13286-53. Unbound and hydraulically bound mixtures. Methods for making test specimens. Part 53: Making cylindrical specimens by axial compression
BS EN 13286-53:2004 BS EN 13286-53:2004. Unbound and hydraulically bound mixtures. Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression
BS EN 13286-52:2004 BS EN 13286-52:2004. Unbound and hydraulically bound mixtures. Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression
BS EN 14970:2006 BS EN 14970:2006. Textiles. Knitted fabrics. Determination of stitch length and yarn linear density in weft knitted fabrics
BS EN 14971:2006 BS EN 14971:2006. Textiles. Knitted fabrics. Determination of number of stitches per unit of length and unit area
ISO22254 : 2005 EDTN1 ISO22254 : 2005 EDTN1. ISO22254 : 2005 (HEADER) EDTN1 Manual toothbrushes - Resistance of tufted portion to deflection - Test method
BS EN 1103:2005 BS EN 1103:2005. Textiles. Fabrics for apparel. Detailed procedure to determine the burning behaviour
BS 4213:2004 BS 4213:2004. Cisterns for domestic use. Cold water storage and combined feed and expansion (thermoplastic) cisterns up to 500 l. Specification
BS EN 61061-2:2001, IEC 61061-2:1992 BS EN 61061-2:2001, IEC 61061-2:1992. Non-impregnated densified laminated wood for electrical purposes. Methods of test
03/522467 DC 03/522467 DC. ISO 18773. Securities and related financial instruments. Abbreviations
03/522468 DC 03/522468 DC. ISO 18774. Securities related financial instruments. Finanical instruments short description (FISN)
BS ISO 10381-3:2001 BS ISO 10381-3:2001. Soil quality. Sampling. Guidance on safety
BS EN 2591-217:2002 BS EN 2591-217:2002. Elements of electrical and optical connection. Test methods. Voltage drop under specified current for terminal lugs and in-line splices
BS EN 2591-218:2002 BS EN 2591-218:2002. Elements of electrical and optical connection. Test methods. Ageing of terminal lugs and in-line splices by temperature and current cycling
BS EN 2591-219:2002 BS EN 2591-219:2002. Elements of electrical and optical connection. Test methods. Voltage strength for insulated terminal lugs and in-line splices
PD 5000-1:2002 PD 5000-1:2002. International Code of Practice for electronic documents and e-business transactions as legally admissible evidence. Information stored electronically.
PD 5000-2:2002 PD 5000-2:2002. International Code of Practice for electronic documents and e-business transactions as legally admissible evidence. Electronic communication and e-mail policy
PD 5000-3:2002 PD 5000-3:2002. International Code of Practice for electronic documents and e-business transactions as legally admissible evidence. Identity, signature and copyright
PD 5000-4:2002 PD 5000-4:2002. International Code of Practice for electronic documents and e-business transactions as legally admissible evidence. Using certification authorities
PD 5000-5:2002 PD 5000-5:2002. International Code of Practice for electronic documents and e-business transactions as legally admissible evidence. Using trusted third party archives
PD 5000-6:2002 PD 5000-6:2002. International Code of Practice for electronic documents and e-business transactions as legally admissible evidence. Compliance workbook for use with parts 1-5 of DISC PD
BS ISO 787-17:2002 BS ISO 787-17:2002. General methods of test for pigments and extenders. Comparison of lightening power of white pigments
BS EN 2591-422:2002 BS EN 2591-422:2002. Elements of electrical and optical connection. Test methods. Locking wire hole strength
BS EN 2591-325:2002 BS EN 2591-325:2002. Elements of electrical and optical connection. Test methods. Ice resistance
BS EN 2591-421:2002 BS EN 2591-421:2002. Elements of electrical and optical connection. Test methods. Free fall
BS EN 2591-428:2002 BS EN 2591-428:2002. Elements of electrical and optical connection. Test methods. Sinusoidal vibrations with passage of current for crimped terminal lugs
BS EN 2591-501:2002 BS EN 2591-501:2002. Elements of electrical and optical connection. Test methods. Soft solderability
BS EN 2591-507:2002 BS EN 2591-507:2002. Elements of electrical and optical connection. Test methods. Plating porosity
BS EN 2591-514:2002 BS EN 2591-514:2002. Elements of electrical and optical connection. Test methods. Solderability of contacts with self-contained solder and flux
BS EN 2591-513:2002 BS EN 2591-513:2002. Elements of electrical and optical connection. Test methods. Magnetic permeability
BS EN 2591-512:2002 BS EN 2591-512:2002. Elements of electrical and optical connection. Test methods. Effectiveness of non-removable fixing of hermetically sealed connector shell
EP 208 EP 208. ISO 2000 Worldwide Transition Tool (electronic file)
DD ENV 1317-4:2002 DD ENV 1317-4:2002. Road restraint systems. Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers
BS EN 353-2:2002 BS EN 353-2:2002. Personal protective equipment against falls from a height. Guided type fall arresters including a flexible anchor line
BS EN 12697-38:2004 BS EN 12697-38:2004. Bituminous mixtures. Test methods for hot mix asphalt. Test equipment and calibration
BS EN 354:2002 BS EN 354:2002. Personal protective equipment against falls from a height. Lanyards
BS EN 355:2002 BS EN 355:2002. Personal protective equipment against falls from a height. Energy absorbers
BS EN 360:2002 BS EN 360:2002. Personal protective equipment against falls from a height. Retractable type fall arresters
EP 240 EP 240. BSI Electronic Book. Information technology equipment. Safety (BS EN 60950-1)
EP 207 EP 207. BSI Electronic Book. Quality Management 2000 Implementation CD-ROM
BS EN 425:2002 BS EN 425:2002. Resilient and laminate floor coverings. Castor chair test
BS EN 12312-13:2002 BS EN 12312-13:2002. Aircraft ground support equipment. Specific requirements. Lavatory service equipment
BS ISO 8548-5:2003 BS ISO 8548-5:2003. Prosthetics and orthotics. Limb deficiencies. Description of the clinical condition of the person who has had an amputation
BS EN 203-2-1:2005 BS EN 203-2-1:2005. Gas heated catering equipment. Specific requirements. Open burners and wok burners
ISO16853 : 2003 EDTN 1 ISO16853 : 2003 EDTN 1. ISO16853 : 2003 Textile machinery - Sliver cans, rectangular - Main dimensions and tolerances
BS 5588-12:2004 BS 5588-12:2004. Fire precautions in the design, construction and use of buildings. Managing fire safety
BS EN ISO 6218:2005 BS EN ISO 6218:2005. Inland navigation vessels. Manually operated coupling devices for push tows. Safety requirements and main dimensions
BS ISO 8551:2003 BS ISO 8551:2003. Prosthetics and orthotics. Functional deficiencies. Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requir
BS EN 13074:2002, BS 2000-493:2002 BS EN 13074:2002, BS 2000-493:2002. Methods of test for petroleum and its products. Petroleum products. Bitumen and bituminous binders. Recovery of binder from bitum
BS ISO/IEC 13249-1:2002 BS ISO/IEC 13249-1:2002. Information technology. Database languages. SQL multimedia and application packages. Framework
BS EN 203-2-3:2005 BS EN 203-2-3:2005. Gas heated catering equipment. Specific requirements. Boiling pans
BS EN 203-2-4:2005 BS EN 203-2-4:2005. Gas heated catering equipment. Specific requirements. Fryers
BS EN 203-2-6:2005 BS EN 203-2-6:2005. Gas heated catering equipment. Specific requirements. Hot water heaters for beverage
BS EN 13075-1:2002, BS 2000-494:2002 BS EN 13075-1:2002, BS 2000-494:2002. Methods of test for petroleum and its products. Determination of breaking value of cationic bitumen emulsions, mineral filler
BS EN 13071:2002 BS EN 13071:2002. Selective waste collection containers. Above-ground mechanically-lifted containers with capacity from 80 l to 5000 l for selective collection of waste
BS EN 12574-1:2002 BS EN 12574-1:2002. Stationary waste containers. Containers with a capacity from 1700 l to 5000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting devices.
BS EN 12574-2:2002 BS EN 12574-2:2002. Stationary waste containers. Performance requirements and test methods
BS EN 12574-3:2002 BS EN 12574-3:2002. Stationary waste containers. Safety and health requirements
BS EN 3475-805:2002 BS EN 3475-805:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Characteristic impedance
BS EN 3475-804:2002 BS EN 3475-804:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Velocity of propagation
BS EN 3475-803:2002 BS EN 3475-803:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Capacitance variation
BS EN 3475-802:2002 BS EN 3475-802:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Capacitance unbalance
BS EN 3475-801:2002 BS EN 3475-801:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Capacitance per unit length
BS EN 3475-705:2002 BS EN 3475-705:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Contrast measurement
BS EN 3475-704:2002 BS EN 3475-704:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Flexibility
BS EN 3475-605:2002 BS EN 3475-605:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Wet short circuit test
BS EN 3475-604:2002 BS EN 3475-604:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to dry arc propagation
BS EN 3475-603:2002 BS EN 3475-603:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to wet arc tracking
BS EN 3475-512:2002 BS EN 3475-512:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Flexure endurance
BS EN 3475-511:2002 BS EN 3475-511:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Cable-to-cable abrasion
BS EN 3475-510:2002 BS EN 3475-510:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Tensile strength and elongation of extruded insulation, sheath and jacket material
BS EN 3475-509:2002 BS EN 3475-509:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Solderability
BS EN 3475-508:2002 BS EN 3475-508:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Plating thickness
BS EN 3475-413:2002 BS EN 3475-413:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Wrap back test
BS EN 3475-412:2002 BS EN 3475-412:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Humidity resistance
BS EN 3475-806:2002 BS EN 3475-806:2002. Aerospace series. Cables, electrical, aircraft use. Test methods. Attenuation
BS EN 2591-6323:2002 BS EN 2591-6323:2002. Aerospace series. Elements of electrical and optical connection. Test methods. Optical elements. Thermal shock (Hermetically sealed devices)
BS EN 2591-6321:2002 BS EN 2591-6321:2002. Aerospace series. Elements of electrical and optical connection. Test methods. Optical elements. Damp heat, cyclic test
BS EN 2591-617:2002 BS EN 2591-617:2002. Aerospace series. Elements of electrical and optical connection. Test methods. Optical elements. Temperature cycling
BS EN 2591-614:2002 BS EN 2591-614:2002. Aerospace series. Elements of electrical and optical connection. Test methods. Optical elements. Connector radial compression
BS EN 2591-613:2002 BS EN 2591-613:2002. Elements of electrical and optical connection. Test methods. Optical elements. Impact test
BS EN 2591-607:2002 BS EN 2591-607:2002. Elements of electrical and optical connection. Test methods. Optical elements. Immunity to ambient light coupling
BS EN 2591-606:2002 BS EN 2591-606:2002. Aerospace series. Elements of electrical and optical connection. Test methods. Optical elements. Crosstalk
BS EN 2591-605:2002 BS EN 2591-605:2002. Elements of electrical and optical connection. Test methods. Optical elements. Return loss
BS EN 203-2-7:2007 BS EN 203-2-7:2007. Gas heated catering equipment. Specific requirements. Salamanders and rotisseries
BS EN 2591-603:2002 BS EN 2591-603:2002. Elements of electrical and optical connection. Test methods. Optical elements. Change of power distribution
BS ISO 8528-2:2005 BS ISO 8528-2:2005. Reciprocating internal combustion engine driven alternating current generating sets. Engines
BS ISO 8528-3:2005 BS ISO 8528-3:2005. Reciprocating internal combustion engine driven alternating current generating sets. Alternating current generators for generating sets
BS ISO 8528-4:2005 BS ISO 8528-4:2005. Reciprocating internal combustion engine driven alternating current generating sets. Controlgear and switchgear
BS ISO/IEC 15945:2002 BS ISO/IEC 15945:2002. Information technology. Security techniques. Specification of TTP services to support the application of digital signatures
BS ISO 8528-5:2005 BS ISO 8528-5:2005. Reciprocating internal combustion engine driven alternating current generating sets. Generating sets
BS EN 203-2-8:2005 BS EN 203-2-8:2005. Gas heated catering equipment. Specific requirements. Brat pans and paella cookers
BS ISO 8528-6:2005 BS ISO 8528-6:2005. Reciprocating internal combustion engine driven alternating current generating sets. Test methods
BS EN 203-2-9:2005 BS EN 203-2-9:2005. Gas heated catering equipment. Specific requirements. Solid tops, warming plates and griddles
BS EN 13075-2:2002, BS 2000-495:2002 BS EN 13075-2:2002, BS 2000-495:2002. Methods of test for petroleum and its products. Determination of fines mixing time of cationic bitumen emulsions
BS 7255:2001 BS 7255:2001. Code of practice for safe working on lifts
BS EN 361:2002 BS EN 361:2002. Personal protective equipment against falls from a height. Full body harnesses
BS ISO 9085:2002 BS ISO 9085:2002. Calculation of load capacity of spur and helical gears. Application for industrial gears
BS IEC 60397:1994 BS IEC 60397:1994. Test methods for batch furnaces with metallic heating resistors
BS EN 10300:2005 BS EN 10300:2005. Steel tubes and fittings for onshore and offshore pipelines. Bitumen hot applied materials for external coating
BS EN 1437:2002 BS EN 1437:2002. Plastics piping systems. Piping systems for underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading
BS EN 62300:2005 BS EN 62300:2005. Consumer audio/video equipment digital interface with plastic optical fibre
BS EN 14367:2005 BS EN 14367:2005. Non controllable backflow preventer with different pressure zones. Family C, type A
BS EN 12354-6:2003 BS EN 12354-6:2003. Building acoustics. Estimation of acoustic performance of buildings from the performance of elements. Sound absorption in enclosed spaces
PD CR 12952-17:2002 PD CR 12952-17:2002. Water boilers and auxiliary installations. Guidelines for the involvement of an inspection body independent of the manufacturer
PD CR 12953-14:2002 PD CR 12953-14:2002. Shell boilers. Guideline for involvement of an inspection body independent the manufacturer
ISO/IEC22091 : 2002 EDTN 1 ISO/IEC22091 : 2002 EDTN 1. ISO/IEC22091 : 2002 Information technology- Streaming Lossless Data Compression Algorithm (SLDC)
ISO/IEC22092 : 2002 EDTN 1 ISO/IEC22092 : 2002 EDTN 1. ISO/IEC22092 : 2002 Information technology -- Data interchange on 130 mm magneto-optical disk cartridges -- Capacity: 9,1 Gbytes per cartridge
ISO18276 : 2005 EDTN1 ISO18276 : 2005 EDTN1. ISO18276 : 2005 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classifica
ISO636 : 2004 EDTN 3 ISO636 : 2004 EDTN 3. ISO636 : 2004 Welding consumables - Rods, wires, deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification
BS EN ISO 6360-3:2005 BS EN ISO 6360-3:2005. Dentistry. Number coding system for rotary instruments. Specific characteristics of burs and cutters
ISO17634 : 2004 EDTN1 (R08) ISO17634 : 2004 EDTN1 (R08). ISO17634 : 2004 Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification
BS EN 680:2005 BS EN 680:2005. Determination of the drying shrinkage of autoclaved aerated concrete
BS EN 14345:2004 BS EN 14345:2004. Characterization of waste. Determination of hydrocarbon content by gravimetry
BS EN 14293:2006 BS EN 14293:2006. Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements
BS 5815-1:2005 BS 5815-1:2005. Sheets, sheeting, pillowslips, towels, napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector. Specification for sheeting, sh
BS EN 1062-6:2002 BS EN 1062-6:2002. Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination of carbon dioxide permeability
BS EN 1062-11:2002 BS EN 1062-11:2002. Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Methods of conditioning before testing
ISO17558 : 2006 EDTN1 ISO17558 : 2006 EDTN1. ISO 17558 Steel wire ropes - Socketing procedures - Molten metal and resin socketing
BS ISO 21669:2005 BS ISO 21669:2005. Steel wire ropes. Determination of rotational properties
BS EN ISO 14557:2002 BS EN ISO 14557:2002. Fire-fighting hoses. Rubber and plastics suction hoses and hose assemblies
PD CEN ISO/TR 11610:2004 PD CEN ISO/TR 11610:2004. Protective clothing. Vocabulary
DD CEN/TS 15256:2005 DD CEN/TS 15256:2005. Protective clothing. Hand, arm, leg, genital and neck protectors for use in ice hockey. Protectors for players other than goalkeepers. Requirements and test
BS EN ISO 13982-1:2004 BS EN ISO 13982-1:2004. Protective clothing for use against solid particulates. Performance requirements for chemical protective clothing providing protection to the full body a
BS EN ISO 13982-2:2004 BS EN ISO 13982-2:2004. Protective clothing for use against solid particulates. Test method of determination of inward leakage of aerosols of fine particles into suits
BS EN ISO 10551:2001 BS EN ISO 10551:2001. Ergonomics of the thermal environment. Assessment of the influence of the thermal environment using subjective judgement scales
BS EN ISO 11064-4:2004 BS EN ISO 11064-4:2004. Ergonomic design of control centres. Layout and dimensions of workstations
BS EN ISO 11064-6:2005 BS EN ISO 11064-6:2005. Ergonomic design of control centres. Environmental requirements for control centres
BS EN ISO 11064-7:2006 BS EN ISO 11064-7:2006. Ergonomic design of control centres. Principles for the evaluation of control centres
BS EN 2591-211:2002 BS EN 2591-211:2002. Elements of electrical and optical connection. Test methods. Capacitance
DD ENV 14236:2002 DD ENV 14236:2002. Ultrasonic domestic gas meters
BS EN 13523-8:2002 BS EN 13523-8:2002. Coil coated metals. Test methods. Resistance to salt spray (fog)
BS 8419-1:2005 BS 8419-1:2005. Interoperability between metadata systems used for learning, education and training. Code of practice for the development of application profiles
BS ISO 12989-2:2004 BS ISO 12989-2:2004. Carbonaceous materials used in the production of aluminium. Baked anodes and sidewall blocks. Determination of the reactivity to air. Thermogravimetric method
BS ISO 125:2003 BS ISO 125:2003. Natural rubber latex concentrate. Determination of alkalinity
BS 8419-2:2005 BS 8419-2:2005. Interoperability between metadata systems used for learning, education and training. Code of practice for the development of interoperability between application profile
BS EN 1073-2:2002 BS EN 1073-2:2002. Protective clothing against radioactive contamination. Requirements and test methods for non-ventilated protective clothing against particulate radioactive contami
BS ISO 11443:2005 BS ISO 11443:2005. Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
DD ENV 13939:2002 DD ENV 13939:2002. Health informatics. Medical data interchange: HIS/RIS-PACS and HIS/RIS. Modality interface
BS EN 60862-3:2003 BS EN 60862-3:2003. Surface acoustic wave (SAW) filters of assessed quality. Standard outlines
BS EN ISO 15748-1:2002 BS EN ISO 15748-1:2002. Ships and marine technology. Potable water supply on ships and marine structures. Planning and design
BS EN ISO 15748-2:2002 BS EN ISO 15748-2:2002. Ships and marine technology. Potable water supply on ships and marine structures. Method of calculation
BS 5176:2003 BS 5176:2003. Classification system for vulcanized rubbers. Specification
BS ISO 4730:2004 BS ISO 4730:2004. Oil of Melaleuca, terpinen-4-ol type (Tea Tree oil)
BS ISO 9988-2:1999 BS ISO 9988-2:1999. Plastics. Polyoxymethylene (POM) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS 8422:2003 BS 8422:2003. Force measurement. Strain gauge load cell systems. Calibration method
PD IEC/TR 61000-2-8:2002 PD IEC/TR 61000-2-8:2002. Electromagnetic compatibility (EMC). Environment. Voltage dips and short interruptions on public electric power supply systems with statistical measu
BS 5191:2004 BS 5191:2004. Production planning and control. Vocabulary
BS ISO 5742:2004 BS ISO 5742:2004. Pliers and nippers. Nomenclature
BS ISO 5743:2004 BS ISO 5743:2004. Pliers and nippers. General technical requirements
BS ISO 5744:2004 BS ISO 5744:2004. Pliers and nippers. Methods of test
BS ISO 5745:2004 BS ISO 5745:2004. Pliers and nippers. Pliers for gripping and manipulating. Dimensions and test values
BS EN 14395-1:2004 BS EN 14395-1:2004. Influence of organic materials on water intended for human consumption. Organoleptic assessment of water in storage systems. Test method
BS ISO 5748:2004 BS ISO 5748:2004. Pliers and nippers. End cutting nippers. Dimensions and test values
BS ISO 5749:2004 BS ISO 5749:2004. Pliers and nippers. Diagonal cutting nippers. Dimensions and test values
BS ISO 8976:2004 BS ISO 8976:2004. Pliers and nippers. Multiple slip joint pliers. Dimensions and test values
BS EN 13748-2:2004 BS EN 13748-2:2004. Terrazzo tiles. Terrazzo tiles for external use
BS ISO 8979:2004 BS ISO 8979:2004. Pliers and nippers for electronics. Nomenclature
BS ISO 9654:2004 BS ISO 9654:2004. Pliers and nippers for electronics. Single purpose nippers. Cutting nippers
BS ISO 9343:2004 BS ISO 9343:2004. Pliers and nippers. Slip joint pliers. Dimensions and test values
PD ISO/TR 14062:2002 PD ISO/TR 14062:2002. Environmental management. Integrating environmental aspects into product design and development
PD 6651:2002 PD 6651:2002. PNO-ISC Specification Number 008 IUP. ISUP Interworking
PD 6623:2002 PD 6623:2002. PNO-ISC Specification Number 007 ISDN User Part (ISUP)
BS EN ISO 13426-2:2005 BS EN ISO 13426-2:2005. Geotextiles and geotextile-related products. Strength of internal structural junctions. Geocomposites
PD 6645:2002 PD 6645:2002. PNO-ISC Specification Number 006 Interconnect User Part (IUP)
PD ISO/IEC TR 19760:2003 PD ISO/IEC TR 19760:2003. Systems engineering. A guide for the application of ISO/IEC 15288 (System life cycle processes)
BS EN ISO 4921:2002 BS EN ISO 4921:2002. Knitting. Basic concepts. Vocabulary
BS EN ISO 5555:2002 BS EN ISO 5555:2002. Animal and vegetable fats and oils. Sampling
BS EN 61691-3-3:2002, IEC 61691-3-3:2001 BS EN 61691-3-3:2002, IEC 61691-3-3:2001. Design automation. Behavioural languages. Synthesis in VHDL
BSEN61691-3-3 : 2002 (DISK) BSEN61691-3-3 : 2002 (DISK). BSEN61691-3-3 : 2002 Behavioural Languages. Part 3-3: Synthesis in VDHL
BS EN 61691-3-2:2002, IEC 61691-3-2:2001 BS EN 61691-3-2:2002, IEC 61691-3-2:2001. Design automation. Behavioural languages. Mathematical operation in VHDL
BSEN61691-3-2 : 2002 (DISK) BSEN61691-3-2 : 2002 (DISK). BSEN61691-3-2 : 2002 Behaviour language. Part 3-2: Mathematical operation in VHDL
BS ISO 5746:2004 BS ISO 5746:2004. Pliers and nippers. Engineer's and "Lineman's" pliers. Dimensions and test values
WD/ISO/TS22763 : 2002 EDTN 1 WD/ISO/TS22763 : 2002 EDTN 1. ISO/TS22763 : 2002 Crop protection equipment- Sprayers Demonstration track for field crop sprayers
BS ISO 9655:2004 BS ISO 9655:2004. Pliers and nippers for electronics. Single-purpose nippers. Pliers for gripping and manipulating
BS EN 60034-3:2005 BS EN 60034-3:2005. Rotating electrical machines. Specific requirements for cylindrical rotor synchronous machines
BS ISO 9656:2004 BS ISO 9656:2004. Pliers and nippers for electronics. Test methods
BS ISO 9657:2004 BS ISO 9657:2004. Pliers and nippers for electronics. General technical requirements
ISO1711-2 : 2005 EDTN1 ISO1711-2 : 2005 EDTN1. ISO1711-2 : 2005 Assembly tools for screws and nuts - Technical specifications. Part 2: Machine operated sockets ('impact')
BS EN ISO 14271:2001 BS EN ISO 14271:2001. Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)
BS EN 14374:2004 BS EN 14374:2004. Timber structures. Structural laminated veneer lumber. Requirements
BS EN 14346:2006 BS EN 14346:2006. Characterization of waste. Calculation of dry matter by determination of dry residue or water content
BS EN 14259:2003 BS EN 14259:2003. Adhesives for floor covering. Requirements for mechanical and electrical performance
BS ISO 20282-1:2006 BS ISO 20282-1:2006. Ease of operation of everyday products. Design requirements for context of use and user characteristics
BS ISO 2846-4:2000 BS ISO 2846-4:2000. Graphic technology. Colour and transparency of ink sets for four-colour-printing. Screen printing
BS EN ISO 15908:2002 BS EN ISO 15908:2002. Adhesives for thermoplastic piping systems. Test method for the determination of thermal stability of adhesives
BS EN ISO 14273:2001 BS EN ISO 14273:2001. Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds
BS EN ISO 11592:2001 BS EN ISO 11592:2001. Small craft less than 8 m length of hull. Determination of maximum propulsion power rating
BS EN ISO 19133:2007 BS EN ISO 19133:2007. Geographic information. Location based services. Tracking and navigation
BS EN ISO 15136-1:2001 BS EN ISO 15136-1:2001. Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Pumps
BS EN ISO 9556:2001 BS EN ISO 9556:2001. Steel and iron. Determination of total carbon content. Infrared absorption method after combustion in an induction furnace
BS EN ISO 14584:2001 BS EN ISO 14584:2001. Hexalobular socket raised countersunk head screws
BS EN ISO 10156-2:2005 BS EN ISO 10156-2:2005. Gas cylinders. Gases and gas mixtures. Determination of oxidizing ability of toxic and corrosive gases and gas mixtures
BS EN ISO 14272:2001 BS EN ISO 14272:2001. Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
BS EN 601:2004 BS EN 601:2004. Aluminum and aluminium alloys. Castings. Chemical composition of castings for use in contact with foodstuff
BS EN ISO 19135:2007 BS EN ISO 19135:2007. Geographic information. Procedures for item registration
BS EN 602:2004 BS EN 602:2004. Aluminium and aluminium alloys. Wrought products. Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff
BS EN 14384:2005 BS EN 14384:2005. Pillar fire hydrants
BS EN 10328:2005 BS EN 10328:2005. Iron and steel. Determination of the conventional depth and hardening after surface heating
DD ENV 13381-2:2002 DD ENV 13381-2:2002. Test methods for determining the contribution to the fire resistance of structural members. Vertical protective membranes
DD ENV 13381-3:2002 DD ENV 13381-3:2002. Test methods for determining the contribution to the fire resistance of structural members. Applied protection to concrete members
DD ENV 13381-4:2002 DD ENV 13381-4:2002. Test methods for determining the contribution to the fire resistance of structural members. Applied protection to steel members
DD ENV 13381-5:2002 DD ENV 13381-5:2002. Test methods for determining the contribution to the fire resistance of structural members. Applied protection to concrete/profiled sheet composite members
DD ENV 13381-6:2002 DD ENV 13381-6:2002. Test methods for determining the contribution to the fire resistance of structural members. Applied protection to concrete filled hollow steel columns
DD ENV 13381-7:2002 DD ENV 13381-7:2002. Test methods for determining the contribution to the fire resistance of structural members. Applied protection to timber members
BS ISO 4365:2005 BS ISO 4365:2005. Liquid flow in open channels. Sediment in streams and canals. Determination of concentration, particle size distribution and relative density
BS EN 13204:2004 BS EN 13204:2004. Double acting hydraulic rescue tools for fire and rescue service use. Safety and performance requirements
CWA 14426:2002 CWA 14426:2002. Investigation of possible roles for directories within electronic commerce
CWA 14446:2002 CWA 14446:2002. European generic article register. Conceptual description of EGAR, working methodology and relation to the tendering and procurement process in the healthcare sector
CWA 14445:2002 CWA 14445:2002. European generic article register. Recommendations regarding terminology of product groups and article designations and relation to other nomenclatures
CWA 14167-2:2002 CWA 14167-2:2002. Security requirements for trustworthy systems managing certificates for electronic signatures. Cryptographic module for CSP signing operations. Protection profile (M
CWA 14169:2002 CWA 14169:2002. Secure signature-creation devices "EAL 4+"
CWA 14050-10:2002 CWA 14050-10:2002. Extensions for financial services (XFS) interface specification. Release 3.01. Sensors and indicators unit device class interface
CWA 14050-23:2002 CWA 14050-23:2002. Extensions for financial services (XFS) interface specification. Release 3.01. Sensors and indicators unit device class interface. Migration from version 2.0 (see
BS EN ISO 4490:2002 BS EN ISO 4490:2002. Metallic powders. Determination of flow time by means of a calibrated funnel (Hall flowmeter)
PD IEC TR 62316:2003 PD IEC TR 62316:2003. Guidance for the interpretation of OTDR backscattering traces
BS EN ISO 14586:2001 BS EN ISO 14586:2001. Hexalobular socket countersunk head tapping screws
BS EN ISO 14270:2001 BS EN ISO 14270:2001. Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
BS EN ISO 15245-2:2001 BS EN ISO 15245-2:2001. Gas cylinders. Parallel threads for connection of valves to gas cylinders. Gauge inspection
BS EN ISO 14579:2001 BS EN ISO 14579:2001. Hexalobular socket head cap screws
BS EN 60191-6-12:2002 BS EN 60191-6-12:2002. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages
BS EN ISO 663:2001 BS EN ISO 663:2001. Animal and vegetable fats and oils. Determination of insoluble impurities content
BS EN 60793-1-41:2003 BS EN 60793-1-41:2003. Optical fibres. Measurement methods and test procedures. Bandwidth
BS EN ISO 3175-3:2003 BS EN ISO 3175-3:2003. Textiles. Dry cleaning and finishing. Procedure for testing performance when cleaning and finishing using hydrocarbon solvent
PD IEC TR 61292-3:2003 PD IEC TR 61292-3:2003. Optical amplifiers. Classification, characteristics and applications
BS 4729:2005 BS 4729:2005. Clay and calcium silicate bricks of special shapes and sizes. Recommendations
BS EN ISO 3175-4:2003 BS EN ISO 3175-4:2003. Textiles. Dry cleaning and finishing. Procedure for testing performance when cleaning and finishing using simulated wetcleaning
BS ISO 9735-1:2002 BS ISO 9735-1:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax rules common to all parts
BS EN ISO 13936-1:2004 BS EN ISO 13936-1:2004. Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics. Fixed seam opening method
KIT 101 KIT 101. DISC PD 5000. Parts 1-5. An international code of practice for electronic documents and e-business transactions for evidence, audit, long term duty of care
KIT 102 KIT 102. DISC PD 5000. Parts 1-6. An international code of practice for electronic documents and e-business transactions for evidence, audit, long term duty of care
BS ISO 9735-2:2002 BS ISO 9735-2:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax rules specific to batch EDI
BS ISO 9735-3:2002 BS ISO 9735-3:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax rules specific to interactive EDI
BS ISO 9735-4:2002 BS ISO 9735-4:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax and service report message for batch EDI
BS ISO 9735-6:2002 BS ISO 9735-6:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Secure authentication and acknowledgement messa
BS ISO 9735-5:2002 BS ISO 9735-5:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Security rules for batch EDI (authenticity, int
BS ISO 9735-7:2002 BS ISO 9735-7:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Security rules for batch EDI (confidentiality)
BS ISO 9735-10:2002 BS ISO 9735-10:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Syntax service directories
BS ISO 9735-8:2002 BS ISO 9735-8:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Associated data in EDI
BS ISO 9735-9:2002 BS ISO 9735-9:2002. Electronic data interchange for administration, commerce and transport (EDIFACT). Application level syntax rules. Security key and certificate management message
BS ISO 2230:2002 BS ISO 2230:2002. Rubber products. Guidelines for storage
BS EN ISO 14673-3:2001 BS EN ISO 14673-3:2001. Milk and milk products. Determination of nitrate and nitrite contents. Method using cadmium reduction and flow injection analysis with in-line dialysis (
BS EN ISO 14673-1:2001 BS EN ISO 14673-1:2001. Milk and milk products. Determination of nitrate and nitrite contents. Method using cadmium reduction and spectrometry
BS EN ISO 14673-2:2001 BS EN ISO 14673-2:2001. Milk and milk products. Determination of nitrate and nitrite contents. Method using segmented flow analysis (Routine method)
BS 3837-1:2004 BS 3837-1:2004. Expanded polystyrene boards. Boards and blocks manufactured from expandable beads. Requirements and test methods
BS ISO 9261:2003 BS ISO 9261:2003. Agricurltural irrigation equipment. Emitters and emitting pipe. Specification and test methods
BS EN ISO 10477:2004 BS EN ISO 10477:2004. Dentistry. Polymer-based crown and bridge materials
BS ISO 18933:2006 BS ISO 18933:2006. Imaging materials. Magnetic tape. Care and handling practices for extended usage
BS EN 60539-1:2002, IEC 60539-1:2002 BS EN 60539-1:2002, IEC 60539-1:2002. Directly heated negative temperature coefficient thermistors. Generic specification
BS EN ISO 8980-3:2004 BS EN ISO 8980-3:2004. Ophthalmic optics. Uncut finished spectacle lenses. Transmittance specifications and test methods
BS EN ISO 3727-2:2002 BS EN ISO 3727-2:2002. Butter. Determination of moisture, non-fat solids and fat contents. Determination of non-fat solids content (Reference method)
BS EN ISO 3262-12:2001 BS EN ISO 3262-12:2001. Extenders for paints. Specifications and methods of test. Muscovite-type mica
BS EN ISO 3727-1:2002 BS EN ISO 3727-1:2002. Butter. Determination of moisture, non-fat solids and fat contents. Determination of moisture content (Reference method)
BS EN ISO 14896:2001 BS EN ISO 14896:2001. Plastics. Polyurethane raw materials. Determination of isocyanate content
BS EN ISO 4610:2001 BS EN ISO 4610:2001. Plastics. Vinyl chloride homopolymer and copolymer resins. Sieve analysis using air-jet sieve apparatus
BS EN ISO 10993-14:2001 BS EN ISO 10993-14:2001. Biological evaluation of medical devices. Identification and quantification of degradation products from ceramics
PD CR R106-001:2002 PD CR R106-001:2002. Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fields
DD IEC TS 62239:2003 DD IEC TS 62239:2003. Process management for avionics. Preparation of an electronic components management plan
BS EN 62282-3-2:2006 BS EN 62282-3-2:2006. Fuel cell technologies. Stationary fuel cell power systems. Performance test methods
BS EN ISO 9311-2:2002 BS EN ISO 9311-2:2002. Adhesives for thermoplastic piping systems. Determination of shear strength
BS ISO 7206-4:2002 BS ISO 7206-4:2002. Implants for surgery. Partial and total hip joint prostheses. Determination of endurance properties of stemmed femoral components
BS EN 263:2002 BS EN 263:2002. Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
BS EN 60079-0:2004 BS EN 60079-0:2004. Electrical apparatus for explosive gas atmospheres. General requirements
PD IEC TR 61278:1997, IEC TR 61278:1997 PD IEC TR 61278:1997, IEC TR 61278:1997. Live working. Guidelines for dielectric testing of tools and equipment
BS EN 60079-15:2005 BS EN 60079-15:2005. Electrical apparatus for explosive gas atmospheres. Construction, test and marking of type of protection "n" electrical apparatus
ISO/IEC14776-326 : 2002 EDTN 1 ISO/IEC14776-326 : 2002 EDTN 1. ISO/IEC14776-326 : 2002 Information technology Small Computer System Interface (SCSI). Part 326: Reduced Block Commands (RBC)
ISO/IEC14776-331 : 2002 EDTN.1 ISO/IEC14776-331 : 2002 EDTN.1. ISO/IEC 14776-331 Information technology - Small Computer System Interface (SCSI). Part 331: Stream Commands (SSC)
ISO/IEC23289 : 2002 EDTN 1 ISO/IEC23289 : 2002 EDTN 1. ISO/IEC23289 : 2002 Information technology- Telecommunications and information exchange between systems- Corporate telecommunication networks- Si
WD/ISO/IEC23290 : 2002 EDTN 1 WD/ISO/IEC23290 : 2002 EDTN 1. ISO/IEC23290 : 2002 Information technology- Telecommunications and information exchange between systems - Private Integrated Services Netwo
BS EN ISO 604:2003 BS EN ISO 604:2003. Plastics. Determination of compressive properties
BS EN ISO 3167:2003 BS EN ISO 3167:2003. Plastics. Multipurpose test specimens
PD CLC R0BT-005:2001 PD CLC R0BT-005:2001. Information concerning plugs for household appliances covered by CLC/TC 61 used in various CENELEC countries
BS EN 61082-1:2006 BS EN 61082-1:2006. Preparation of documents used in electrotechnology. Rules
BS EN 60695-11-2:2003 BS EN 60695-11-2:2003. Fire hazard testing. Test flames. 1 kW nominal pre-mixed flame. Apparatus, confirmatory test arrangement and guidance
DD IEC TS 60695-2-20:2004 DD IEC TS 60695-2-20:2004. Fire hazard testing. Glowing/hot wire based test methods. Hot-wire coil ignitability. Apparatus, test method and guidance
BS EN 60068-2-1:2007 BS EN 60068-2-1:2007. Environmental testing. Tests. Test A. Cold
BS IEC 61942:1997 BS IEC 61942:1997. Live working. Gloves and mitts with mechanical protection
BS EN 50174-3:2003 BS EN 50174-3:2003. Installation technology. Cabling installation. Installation planning and practices outside buildings
BS EN 60068-2-30:2005 BS EN 60068-2-30:2005. Environmental testing. Tests. Test Db and guidance: Damp heat, cyclic (12 h + 12 h cycle)
BS EN 60068-2-47:2005 BS EN 60068-2-47:2005. Environmental testing. Tests. Mounting of specimens for vibration, impact and similar dynamic tests
BS EN 14255-1:2005 BS EN 14255-1:2005. Measurement and assessment of personal exposures to incoherent optical radiation. Ultraviolet radiation emitted by artifical sources in the workplace
BS EN ISO 13788:2002 BS EN ISO 13788:2002. Hygrothermal performance of building components and building elements. Internal surface temperature to avoid critical surface humidity and interstitial conde
BS EN 60332-1-1:2004 BS EN 60332-1-1:2004. Tests on electrical and optical cables under fire conditions. Test for a vertical flame propagation for a single insulated wire or cable. Apparatus
BS EN 756:2004 BS EN 756:2004. Welding consumables. Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels. Classificat
BS ISO 23874:2006 BS ISO 23874:2006. Natural gas. Gas chromatographic requirements for hydrocarbon dewpoint calculation
BS EN 12758:2002 BS EN 12758:2002. Glass in building. Glazing and airborne sound insulation. Product descriptions and determination of properties
BS EN 60332-1-2:2004 BS EN 60332-1-2:2004. Tests on electric and optical fibre cables under fire conditions. Test for vertical flame propagation for a single insulated wire or cable. Procedure for 1 k
WD/ISO18286 : 2004 EDTN.1 WD/ISO18286 : 2004 EDTN.1. ISO18286 : 2004 Hot-rolled stainless steel plates - Tolerances on dimensions and shape
BS EN 60332-1-3:2004 BS EN 60332-1-3:2004. Tests on electric and optical fibre cables under fire conditions. Test for vertical flame propagation for a single vertical insulated wire or cable. Procedur
BS EN 60332-2-2:2004 BS EN 60332-2-2:2004. Tests on electric and optical fibre cables under fire conditions. Tests for vertical flame propagation for a single small insulated wire or cable. Procedure
BS EN 60332-2-1:2004 BS EN 60332-2-1:2004. Tests on electric and optical fibre cables under fire conditions. Test for vertical flame propagation for a single small insulated wire or cable. Apparatus
PD IEC/TR 61000-1-5:2004 PD IEC/TR 61000-1-5:2004. Electromagnetic compatibility (EMC). General. High power electromagnetic (HPEM) effects on civil systems
PD CISPR/TR 31:2003 PD CISPR/TR 31:2003. Database on the characteristics of radio services
PD IEC TR 61010-3-041:2002 PD IEC TR 61010-3-041:2002. Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-041:199
PDIEC/TR61010-3-041 : 2002 (DISK) PDIEC/TR61010-3-041 : 2002 (DISK). PDIEC/TR61010-3-041 : 2002 Safety requirements for electrical equipment for measurment, control, and laboratory use. Part 3-041: Co
BS EN ISO 10438-1:2003 BS EN ISO 10438-1:2003. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. General requirements
ISO/TR9564-4 : 2004 EDTN.1 ISO/TR9564-4 : 2004 EDTN.1. ISO/TR9564-4 : 2004 Banking -- Personal Identification Number (PIN) management and security -. Part 4: Guidelines for PIN handling in open networ
BS EN 14398-1:2003 BS EN 14398-1:2003. Cryogenic vessels. Large transportable non-vacuum insulated vessels. Fundamental requirements
PD IEC TR 61010-3-042:2002 PD IEC TR 61010-3-042:2002. Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-042:199
PDIEC/TR61010-3-042 : 2002 (DISK) PDIEC/TR61010-3-042 : 2002 (DISK).
ISO/TR19038 : 2005 EDTN 1 ISO/TR19038 : 2005 EDTN 1. ISO/TR19038 : 2005 Banking and related financial services - Triple DEA - Modes of operation - Implementation guidelines
PD IEC TR 61292-2:2003 PD IEC TR 61292-2:2003. Optical amplifier technical reports. Theoretical background for noise figure evaluation using the electrical spectrum analyzer
BS EN ISO 11199-2:2005 BS EN ISO 11199-2:2005. Walking aids manipulated by both arms. Requirements and test methods. Rollators
BS EN ISO 14692-1:2002 BS EN ISO 14692-1:2002. Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Vocabulary, symbols, applications and materials
BS EN 13408:2002 BS EN 13408:2002. Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of bond strength
ISO/IEC23651 : 2003 EDTN 1 ISO/IEC23651 : 2003 EDTN 1. ISO/IEC23651 : 2003 Information technology- 8 mm wide magnetic tape cartridge for information interchange- Helical scan recording AIT-3 format
BS EN 14373:2005 BS EN 14373:2005. Explosion suppression systems
BS EN ISO 16812:2003 BS EN ISO 16812:2003. Petroleum and natural gas industries. Shell-and-tube heat exchangers
BS EN 14399-1:2005 BS EN 14399-1:2005. High-strength structural bolting assemblies for preloading. General requirements
BS EN 14399-2:2005 BS EN 14399-2:2005. High-strength structural bolting assemblies for preloading. Suitability test for preloading
BS EN 62028:2004 BS EN 62028:2004. General methods of measurement for digital television receivers
BS EN 14399-3:2005 BS EN 14399-3:2005. High-strength structural bolting for preloading. System HR. Hexagon bolt and nut assemblies
BS EN 14399-4:2005 BS EN 14399-4:2005. High-strength structural bolting assemblies for preloading. System HV. Hexagon bolt and nut assemblies
BS ISO/IEC 19762-2:2005 BS ISO/IEC 19762-2:2005. Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary. Optically readable media (ORM)
BS 7990:2003 BS 7990:2003. Tube furnace method for the determination of toxic product yields in fire effluents
BS ISO/IEC 19762-3:2005 BS ISO/IEC 19762-3:2005. Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary. Radio frequency identification (RFID)
BS ISO/IEC 19762-1:2005 BS ISO/IEC 19762-1:2005. Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary. General terms relating to AIDC
BS EN 13409:2002 BS EN 13409:2002. Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of setting time
BS EN 13415:2002 BS EN 13415:2002. Adhesives. Test of adhesives for floor coverings. Determination of the electrical resistance of adhesive films
KIT 97 KIT 97. TickIT guide. Combi-kit (PDF and hard copy)
ISO/IEC13869 : 2003 EDTN.2 ISO/IEC13869 : 2003 EDTN.2. ISO/IEC13869 : 2003 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network -
ISO/IEC14846 : 2003 EDTN 2 ISO/IEC14846 : 2003 EDTN 2. ISO/IEC14846 : 2003 Information technology- Telecommunications and information exchange between systems- Private Integrated Services Network - In
ISO/IEC13873 : 2003 EDTN 1 ISO/IEC13873 : 2003 EDTN 1. ISO/IEC13873 : 2003 Information technology- Telecommunications and information exchange between systems- Private Integrated Services Network- Int
ISO/IEC14843 : 2003 EDTN 2 ISO/IEC14843 : 2003 EDTN 2. ISO/IEC14843 : 2003 Information technology- Telecommunications and information exchange between systems- Private Integrated Services Network- Int
BS EN ISO 13936-2:2004 BS EN ISO 13936-2:2004. Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics. Fixed load method
ISO/IEC17878 : 2003 EDTN 2 ISO/IEC17878 : 2003 EDTN 2. ISO/IEC17878 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
ISO/IEC17876 : 2003 EDTN 2 ISO/IEC17876 : 2003 EDTN 2. ISO/IEC17876 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
ISO/IEC15992 : 2003 EDTN 2 ISO/IEC15992 : 2003 EDTN 2. ISO/IEC15992 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
ISO/IEC15991 : 2003 EDTN 2 ISO/IEC15991 : 2003 EDTN 2. ISO/IEC15991 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
ISO/IEC15772 : 2003 EDTN 2 ISO/IEC15772 : 2003 EDTN 2. ISO/IEC15772 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
ISO/IEC15433 : 2003 EDTN 2 ISO/IEC15433 : 2003 EDTN 2. ISO/IEC15433 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
ISO/IEC15431 : 2003 EDTN 2 ISO/IEC15431 : 2003 EDTN 2. ISO/IEC15431 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
ISO/IEC13868 : 2003 EDTN.2 ISO/IEC13868 : 2003 EDTN.2. ISO/IEC13868 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
ISO/IEC13865 : 2003 EDTN 2 ISO/IEC13865 : 2003 EDTN 2. ISO/IEC13865 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
ISO/IEC19460 : 2003 EDTN 2 ISO/IEC19460 : 2003 EDTN 2. ISO/IEC19460 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
ISO/IEC15054 : 2003 EDTN 2 ISO/IEC15054 : 2003 EDTN 2. ISO/IEC15054 : 2003 Information technology- Telecommunications and information exchange between systems- Private Integrated Services Network -- I
ISO/IEC15053 : 2003 EDTN 2 ISO/IEC15053 : 2003 EDTN 2. ISO/IEC15053 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
ISO/IEC15051 : 2003 EDTN 2 ISO/IEC15051 : 2003 EDTN 2. ISO/IEC15051 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
ISO/IEC15050 : 2003 EDTN 2 ISO/IEC15050 : 2003 EDTN 2. ISO/IEC15050 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
ISO/IEC15506 : 2003 EDTN 2 ISO/IEC15506 : 2003 EDTN 2. ISO/IEC15506 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
ISO/IEC15505 : 2003 EDTN 3 ISO/IEC15505 : 2003 EDTN 3. ISO/IEC15505 : 2003 Information technology- Telecommunications and information exchange between systems- Private Integrated Services Network- Spe
BS ISO 15849:2001 BS ISO 15849:2001. Ships and marine technology. Guidelines for implementation of a fleet management system network
ISO8061 : 2004 EDTN.3 ISO8061 : 2004 EDTN.3. ISO8061 : 2004 Alpine ski-bindings - Selection of release torque values
ISO11755 : 2005 EDTN 1 ISO11755 : 2005 EDTN 1. ISO11755 : 2005 Gas cylinders - Cylinder bundles for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling
BS ISO/IEC 18043:2006 BS ISO/IEC 18043:2006. Information technology. Security techniques. Selection, deployment and operations of intrusion detection systems
BS EN ISO 11403-2:2004 BS EN ISO 11403-2:2004. Plastics. Acquisition and presentation of comparable multipoint data. Thermal and processing properties
DD ENV 14273:2002 DD ENV 14273:2002. Advanced technical ceramics. Ceramic powders. Determination of crystalline phases in zirconia
04/30068987 DC 04/30068987 DC. ISO/DIS 19702. Analysis of fire gases using Fourier infra-red technique (FTIR)
ISO19702 : 2006 EDTN1 ISO19702 : 2006 EDTN1. ISO19702 : 2006 Toxicity testing of fire effluents - Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis
BS EN 60728-6:2003 BS EN 60728-6:2003. Cable networks for television signals, sound signals and interactive services. Optical equipment
BS EN ISO 186:2002 BS EN ISO 186:2002. Paper and board. Sampling to determine average quality
BS ISO 12214:2002 BS ISO 12214:2002. Road vehicles. Direction-of-motion stereotypes for automotive hand controls
BS EN 60695-1-30:2002 BS EN 60695-1-30:2002. Fire hazard testing. Guidance for assessing fire hazard of electrotechnical products. Use of preselection testing procedures
BS ISO 16565:2002 BS ISO 16565:2002. Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
BS EN ISO 19953:2004 BS EN ISO 19953:2004. Footwear. Test methods for heels. Resistance to lateral impact
BS EN ISO 19956:2004 BS EN ISO 19956:2004. Footwear. Test methods for heels. Fatigue resistance
BS ISO 13373-1:2002 BS ISO 13373-1:2002. Condition monitoring and diagnostics of machines. Vibration condition monitoring. General procedures
BS EN ISO 19958:2004 BS EN ISO 19958:2004. Footwear. Test methods for heels and top pieces. Top piece retention strength
PP 7312:2002 PP 7312:2002. Structural design. Extracts from British Standards for students of structural design
BS ISO 7475:2002 BS ISO 7475:2002. Mechanical vibration. Balancing machines. Enclosures and other protective measures for the measuring station
BS ISO 8122:2003 BS ISO 8122:2003. Textile machinery. Knitting machines. Number of needles for circular knitting machines of large nominal diameter
BS ISO 8117:2003 BS ISO 8117:2003. Textile machinery. Knitting machines. Nominal diameters of circular machines
BS EN 61211:2005 BS EN 61211:2005. Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1000 V. Impulse puncture testing in air
ISO16100-2 : 2003 EDTN 1 ISO16100-2 : 2003 EDTN 1. ISO16100-2 : 2003 Industrial automation systems and integration - Manufacturing software capability profiling - . Part 2: Profiling methodology
BS EN 14034-1:2004 BS EN 14034-1:2004. Determination of explosion characteristics of dust clouds. Determination of the maximum explosion pressure pmax of dust clouds
BS EN ISO 5349-1:2001 BS EN ISO 5349-1:2001. Mechanical vibration. Measurement and evaluation of human exposure to hand-transmitted vibration. General requirements
NC/BS6399-2 : 1997 (TEXT) NC/BS6399-2 : 1997 (TEXT). BS6399-2 : 1997 Loading for buildings. Part 2: Code of practice for wind loads
ISO/IEC13870 : 2003 EDTN 3 ISO/IEC13870 : 2003 EDTN 3. ISO/IEC13870 : 2003 Information technology- Telecommunications and information exchange between systems- Private Integrated Services Network- Int
BS 8888:2002 BS 8888:2002. Technical product documentation (TPD). Specification for defining, specifying and graphically representing products
ISO/IEC13872 : 2003 EDTN 2 ISO/IEC13872 : 2003 EDTN 2. ISO/IEC13872 : 2003 Information technology- Telecommunications and Information exchange between systems- Private Integrated Services Network- Spe
ISO/IEC14844 : 2003 EDTN 2 ISO/IEC14844 : 2003 EDTN 2. ISO/IEC14844 : 2003 Information technology- Telecommunications and Information exchange between systems- Private Integrated Services Network- Do
DD 16792:2002 DD 16792:2002. Technical product documentation (TPD). Digital product definition data practices
ISO/IEC15052 : 2003 EDTN 2 ISO/IEC15052 : 2003 EDTN 2. ISO/IEC15052 : 2003 Information technology- Telecommunications and Information exchange between systems- Private Integrated Services Network- Int
ISO/IEC15429 : 2003 EDTN 2 ISO/IEC15429 : 2003 EDTN 2. ISO/IEC15429 : 2003 Information technology- Telecommunications and information exchange between systems- Private Integrated Services Network - In
BS EN 61249-2-4:2002, IEC 61249-2-4:2001 BS EN 61249-2-4:2002, IEC 61249-2-4:2001. Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad.
BS ISO/IEC TR 15947:2002 BS ISO/IEC TR 15947:2002. Information technology. Security techniques. IT intrusion detection framework
BS EN 60749-14:2003 BS EN 60749-14:2003. Semiconductor devices. Mechanical and climatic test methods. Robustness of terminations (lead integrity)
KIT 98 KIT 98. Fire classification and testing pack
BS EN 60749-25:2003 BS EN 60749-25:2003. Semiconductor devices. Mechanical and climatic test methods. Temperature cycling
BS EN 60684-3-240 to 243:2002 BS EN 60684-3-240 to 243:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Heat-shrinkable PTFE sleeving
BS EN 60684-3-300:2002 BS EN 60684-3-300:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Glass textile fibre sleeving, braided, uncoa
BS EN 13723:2002, BS 2000-489:2002 BS EN 13723:2002, BS 2000-489:2002. Methods of test for petroleum and its products. Petroleum products. Determination of low lead contents in gasolines. Wavelength-d
BS EN 61207-3:2002 BS EN 61207-3:2002. Expression of performance of gas analyzers. Paramagnetic oxygen analyzers
BS EN 60684-3-320:2002 BS EN 60684-3-320:2002. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Polyethylene terephthalate textile sleeving,
BS EN 10329:2005 BS EN 10329:2005. Steel tubes and fittings for onshore and offshore pipelines. External field joint coatings
BS EN 61000-2-4:2002 BS EN 61000-2-4:2002. Electromagnetic compatibility (EMC). Environment. Compatibility levels in industrial plants for low-frequency conducted disturbances
BS EN 10326:2004 BS EN 10326:2004. Continuously hot-dip coated strip and sheet of structural steels. Technical delivery conditions
ISO4955 : 2005 EDTN3 ISO4955 : 2005 EDTN3. ISO4955 : 2005 Heat-resisting steels
BS EN 10327:2004 BS EN 10327:2004. Continuously hot-dip coated strip and sheet of low carbon steels for cold forming. Technical delivery conditions
ISO6931-2 : 2005 EDTN2 ISO6931-2 : 2005 EDTN2. ISO6931-2 : 2005 Stainless steels for springs -. Part 2: Narrow strip
BS EN ISO 4623-1:2002, BS 3900-F13:2002 BS EN ISO 4623-1:2002, BS 3900-F13:2002. Paints and varnishes. Determination of resistance to filiform corrosion. Steel substrates
BS EN ISO 1043-1:2002 BS EN ISO 1043-1:2002. Plastics. Symbols and abbreviated terms. Basic polymers and their special characteristics
BS EN ISO 8968-5:2002 BS EN ISO 8968-5:2002. Milk. Determination of nitrogen content. Determination of protein-nitrogen content
BS EN ISO 8968-4:2002 BS EN ISO 8968-4:2002. Milk. Determination of nitrogen content. Determination of non-protein nitrogen content
BS EN ISO 8968-2:2002 BS EN ISO 8968-2:2002. Milk. Determination of nitrogen content. Block-digestion method (Macro method)
BS EN ISO 8968-1:2002 BS EN ISO 8968-1:2002. Milk. Determination of nitrogen content. Kjeldahl method
DD IEC TS 61994-1:2003 DD IEC TS 61994-1:2003. Piezoelectric and dielectric devices for frequency control and selection. Glossary. Piezoelectric and dielectric resonators
BS EN 12477:2001 BS EN 12477:2001. Protective gloves for welders
BS EN ISO 19019:2005 BS EN ISO 19019:2005. Sea-going vessels and marine technology. Instructions for planning, carrying out and reporting sea trials
BS EN ISO 306:2004 BS EN ISO 306:2004. Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS EN 61000-4-25:2002, IEC 61000-4-25:2001 BS EN 61000-4-25:2002, IEC 61000-4-25:2001. Electromagnetic compatibility (EMC). Testing and measurement techniques. Testing and measurement techniques. HEMP
BS EN ISO 18278-1:2004 BS EN ISO 18278-1:2004. Resistance welding. Weldability. Assessment of weldability for resistance spot, seam and projection welding of metallic materials
BS EN ISO 18278-2:2004 BS EN ISO 18278-2:2004. Resistance welding. Weldability. Alternative procedures for the assessment of steel sheets for spot welding
BS ISO 8020:2002 BS ISO 8020:2002. Tools for pressing. Punches with cylindrical head and straight or reduced shank
BS ISO 21389:2004 BS ISO 21389:2004. Oil of gum turpentine, Chinese (mainly from Pinus massoniana Lamb.)
BS ISO 21390:2005 BS ISO 21390:2005. Oil of wintergreen, China [Gaultheria yunnanensis (Franch.) Rehd.], redistilled
BS EN 62087:2003 BS EN 62087:2003. Methods of measurement for the power consumption of audio, video and related equipment
DD CEN/TS 14235:2002 DD CEN/TS 14235:2002. Materials and articles in contact with foodstuffs. Polymeric coatings on metal substrates. Guide to the selection of conditions and test methods for overall
DD CEN/TS 14234:2002 DD CEN/TS 14234:2002. Materials and articles in contact with foodstuffs. Polymeric coatings on paper and board. Guide to the selection of conditions and test methods for overall m
BS EN 12260:2003, BS 6068-2.83:2003 BS EN 12260:2003, BS 6068-2.83:2003. Water quality. Determination of nitrogen. Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides
BS EN 13258:2003 BS EN 13258:2003. Materials and articles in contact with foodstuffs. Test methods for crazing resistance of ceramic articles
BS EN 14419:2003 BS EN 14419:2003. District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Surveillance systems
BS EN 62134-1:2002 BS EN 62134-1:2002. Fibre optic enclosures. Generic specification
BS EN 60794-3-10:2002 BS EN 60794-3-10:2002. Optical fibre cables. Outdoor cables. Family specification for duct and directly buried optical telecommunication cables
BS EN 60794-3-20:2002 BS EN 60794-3-20:2002. Optical fibre cables. Outdoor cables. Family specification for optical self-supporting aerial telecommunication cables
BS EN 14420-2:2004 BS EN 14420-2:2004. Hose fittings with clamp units. Hose side parts of hose tail
BS EN 14420-3:2004 BS EN 14420-3:2004. Hose fittings with clamp units. Clamp units, bolted or pinned
BS EN 14413-1:2004 BS EN 14413-1:2004. Recreational diving services. Safety related minimum requirements for the training of scuba instructors. Level 1
DD CLC/TS 62081:2002 DD CLC/TS 62081:2002. Arc welding equipment. Installation and use
BS EN 14420-5:2004 BS EN 14420-5:2004. Hose fittings with clamp units. Threaded connections
BS EN ISO 4590:2003 BS EN ISO 4590:2003. Rigid cellular plastics. Determination of the volume percentage of open cells and of closed cells
BS EN 14420-8:2004 BS EN 14420-8:2004. Hose fittings with clamp units. Symmetrical half coupling (Guillemin system)
BS EN ISO 15025:2002 BS EN ISO 15025:2002. Protective clothing. Protection against heat and flame. Method of test for limited flame spread
BS EN 14422:2004 BS EN 14422:2004. Clamp type coupling assemblies for LPG transfer hoses
BS EN 1929-2:2004 BS EN 1929-2:2004. Basket trolleys. Requirements, tests and inspection for basket trolleys with of without a child carrying facility, intended to be used on passenger conveyors
BS EN 14423:2004 BS EN 14423:2004. Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
BS EN 14406:2004 BS EN 14406:2004. Products and systems for the protection and repair of concrete structures. Test methods. Determination of the expansion ratio and expansion evolution
BS EN 14424:2004 BS EN 14424:2004. Hose fittings with screwed ferrules
BS EN 60745-2-12:2003 BS EN 60745-2-12:2003. Hand-held motor-operated electric tools. Safety. Particular requirements for concrete vibrators
BS EN ISO 17078-1:2004 BS EN ISO 17078-1:2004. Petroleum and natural gas industries. Drilling and production equipment. Side-pocket mandrels
WD/DISC PD0025-1 : 2002 RECORDS MNGT WD/DISC PD0025-1 : 2002 RECORDS MNGT. Effective records management. A management guide to the value of BS ISO 15489-1
WD/DISC PD0025-2 : 2002 RECORDS MNGT WD/DISC PD0025-2 : 2002 RECORDS MNGT. Effective records management. Practical implementation of BS ISO 15489-1
DD ENV 1071-6:2002 DD ENV 1071-6:2002. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of the abrasion resistance of coatings by a micro-abrasion wear test
KIT 99 KIT 99. Records management standards & guidance kit
KIT 100 KIT 100. Records management guidance kit
BS ISO 8900:2005 BS ISO 8900:2005. Oil of bergamot petitgrain [Citrus bergamia (Risso et Poit.)]
BS ISO 9844:2006 BS ISO 9844:2006. Oil of bitter orange (Citrus aurantium L.)
BS ISO 21961:2003 BS ISO 21961:2003. Space data and information transfer systems. Data entity dictionary specification language (DEDSL). Abstract syntax
BS ISO 21962:2003 BS ISO 21962:2003. Aerospace series. Space data and information transfer systems. Data entity dictionary specification language (DEDSL). PVL syntax
BS EN 1870-16:2005 BS EN 1870-16:2005. Safety of woodworking machines. Circular sawing machines. Double mitre sawing machines for V-cutting
BS ISO 15889:2003 BS ISO 15889:2003. Space data and information transfer systems. Data description language. EAST specification
BS ISO 8179-1:2004 BS ISO 8179-1:2004. Ductile iron pipes. External zinc-based coating. Metallic zinc with finishing layer
BS EN ISO 2592:2001, BS 2000-36:2002 BS EN ISO 2592:2001, BS 2000-36:2002. Determination of flash and fire points. Cleveland open cup method
BS ISO/IEC 24703:2004 BS ISO/IEC 24703:2004. Information technology. Participant identifiers
BS 5950-8:2003 BS 5950-8:2003. Structural use of steelwork in building. Code of practice for fire resistant design
BS EN ISO 19980:2005 BS EN ISO 19980:2005. Ophthalmic instruments. Corneal topograpers
BS EN 62021-1:2003 BS EN 62021-1:2003. Insulating liquids. Determination of acidity. Automatic potentiometric titration
BS EN 14368:2003 BS EN 14368:2003. Products used for treatment of water intended for human consumption. Manganese dioxide coated limestone
BS EN 14369:2003 BS EN 14369:2003. Products used for treatment of water intended for human consumption. Iron-coated granular activated alumina
BS 5499-11:2002 BS 5499-11:2002. Graphical symbols and signs. Safety signs, including fire safety signs. Water safety signs
ISO/IEC9594-5 : 2001 EDTN 4 ISO/IEC9594-5 : 2001 EDTN 4. ISO/IEC9594-5 : 2001 Information technology- Open Systems Interconnection- The Directory: Protocol specification
BS EN 13172:2001 BS EN 13172:2001. Thermal insulating products. Evaluation of conformity
BS EN 60296:2004 BS EN 60296:2004. Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear
BS EN 10295:2002 BS EN 10295:2002. Heat resistant steel castings
BS EN 1015-18:2002 BS EN 1015-18:2002. Methods of test for mortar for masonry. Determination of water absorption coefficient due to capillary action of hardened mortar
BS EN 61842:2002 BS EN 61842:2002. Microphones and earphones for speech communications
BS EN 1015-21:2002 BS EN 1015-21:2002. Methods of test for mortar for masonry. Determination of the compatibility of one-coat rendering mortars with substrates
ISO/IEC21408 : 2003 EDTN 2 ISO/IEC21408 : 2003 EDTN 2. ISO/IEC21408 : 2003 Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network
DD ISO/TS 6090:2004 DD ISO/TS 6090:2004. Milk and dried milk, buttermilk and buttermilk powder, whey and whey powder. Detection of phosphatase activity
BS ISO 3334:2006 BS ISO 3334:2006. Micrographics. ISO resolution test chart No 2. Description and use
BS EN 14436:2004 BS EN 14436:2004. Copper and copper alloys. Electrolytically tinned strip
BS EN ISO 8974:2002 BS EN ISO 8974:2002. Plastics. Phenolic resins. Determination of residual phenol content by gas chromatography
BS EN 438-1:2005 BS EN 438-1:2005. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Introduction and general information
BS EN 438-2:2005 BS EN 438-2:2005. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Determination of properties
BS EN 438-3:2005 BS EN 438-3:2005. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for laminates less than
BS EN 438-4:2005 BS EN 438-4:2005. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for compact laminates of
BS EN 438-5:2005 BS EN 438-5:2005. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for flooring grade lamin
BS EN 1870-5:2002 BS EN 1870-5:2002. Safety of woodworking machines. Circular sawing machines. Circular sawbenches/up-cutting cross-cut sawing machines
BS EN 438-6:2005 BS EN 438-6:2005. Decorative high-pressure laminates (HPL) sheets based on thermosetting resins. Classification and specifications for exterior-grade compact laminates of thickness 2m
BS EN 438-7:2005 BS EN 438-7:2005. High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Compact laminate and HPL composite panels for internal and
BS EN 13283:2002 BS EN 13283:2002. Zinc and zinc alloys. Secondary zinc
BS EN 61108-1:2003 BS EN 61108-1:2003. Global navigation satellite systems (GNSS). Global positioning system (GPS). Receiver equipment. Performance standards, methods of testing and required test resu
BS ISO 17884:2004 BS ISO 17884:2004. Ships and marine technology. Navigation. Searchlights for high-speed craft
HB 10210:2002 HB 10210:2002. High Voltage Engineering and Testing
BS EN 12002:2002 BS EN 12002:2002. Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts
BS EN 10223-7:2002 BS EN 10223-7:2002. Steel wire and wire products for fences. Steel wire welded panels. For fencing
DD ENV 13803-1:2002 DD ENV 13803-1:2002. Railway applications. Track alignment design parameters. Track gauges 1435 mm and wider. Plain line
BS EN 12484-5:2002 BS EN 12484-5:2002. Irrigation techniques. Automatic turf irrigation systems. Testing methods of systems
BS EN 623-4:2004 BS EN 623-4:2004. Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of surface roughness
DD CLC/TS 50131-7:2003 DD CLC/TS 50131-7:2003. Alarm systems. Intrusion systems. Application guidelines
BS EN 61851-21:2002 BS EN 61851-21:2002. Electric vehicle conductive charging system. Electric vehicle requirements for conductive connection to an a.c./d.c. supply
BS ISO 105-F06:2000 BS ISO 105-F06:2000. Textiles. Tests for colour fastness. Specification for silk adjacent fabric
BS EN 14404:2004 BS EN 14404:2004. Personal protective equipment. Knee protectors for work in the kneeling position
BS ISO 6348:1980 BS ISO 6348:1980. Textiles. Determination of mass. Vocabulary
BS ISO 13875:2005 BS ISO 13875:2005. Liquid milk. Determination of acid-soluble β-lactoglobulin content. Reverse-phase HPLC method
BS ISO 7211-3:1984 BS ISO 7211-3:1984. Textiles. Woven fabrics. Construction. Methods of analysis. Determination of crimp of yarn in fabric
BS ISO 15081:2005 BS ISO 15081:2005. Agricultural irrigation equipment. Graphical symbols for pressurized irrigation systems
PD 6777:2003 PD 6777:2003. Guide to practical implementation of JPEG 2000
BS ISO 7211-4:1984 BS ISO 7211-4:1984. Textiles. Woven fabrics. Construction. Methods of analysis. Determination of twist in yarn removed from fabric
BS ISO 126:2005 BS ISO 126:2005. Natural rubber latex concentrate. Determination of dry rubber content
BS ISO 11285:2004 BS ISO 11285:2004. Milk. Determination of lactulose content. Enzymatic method
BS ISO 3045:2004 BS ISO 3045:2004. Oil of bay [Pimenta racemosa (Mill.) J.W. Moore]
BS ISO 7211-5:1984 BS ISO 7211-5:1984. Textiles. Woven fabrics. Construction. Methods of analysis. Determination of linear density of yarn removed from fabric
BS ISO 706:2004 BS ISO 706:2004. Rubber latex. Determination of coagulum content (sieve residue)
BS EN 50356:2002 BS EN 50356:2002. Method for spark testing of cables
BS ISO 4912:1981 BS ISO 4912:1981. Textiles. Cotton fibres. Evaluation of maturity. Microscopic method
BS ISO 1652:2004 BS ISO 1652:2004. Rubber latex. Determination of apparent viscosity by the Brookfield test method
BS ISO 6741-1:1989 BS ISO 6741-1:1989. Textiles. Fibres and yarns. Determination of commercial mass of consignments. Mass determination and calculations
BS ISO 6741-2:1987 BS ISO 6741-2:1987. Textiles. Fibres and yarns. Determination of commercial mass of consignments. Methods for obtaining laboratory samples
BS ISO 6741-3:1987 BS ISO 6741-3:1987. Textiles. Fibres and yarns. Determination of commercial mass of consignments. Specimen cleaning procedures
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
