BIS Standards Catalogue
PD 3001:2002 PD 3001:2002. Preparing for BS 7799-2 certification
PD 3002:2002 PD 3002:2002. Guide to BS 7799 risk assessment
PD 3003:2002 PD 3003:2002. Are you ready for a BS 7799-2 audit?
PD 3004:2002 PD 3004:2002. Guide to the implementation and auditing of BS 7799 controls
BS EN 14702-2:2006 BS EN 14702-2:2006. Characterisation of sludges. Settling properties. Determination of thickenability
BS EN 1277:2003 BS EN 1277:2003. Plastics piping systems. Thermoplastics piping systems for buried non-pressure applications. Test methods for leaktightness of elastomeric sealing ring type joints
BS EN 10169-1:2003 BS EN 10169-1:2003. Continuously organic coated (coil coated) steel flat products. General information (definitions, materials, tolerances, test methods)
BS EN 13900-1:2003 BS EN 13900-1:2003. Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. General introduction
BS EN 13900-2:2003 BS EN 13900-2:2003. Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination of colouristic properties and ease of dispersion in pla
BS EN 13900-3:2003 BS EN 13900-3:2003. Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination of colouristic properties and ease of dispersion of bla
BS ISO 15375:2004 BS ISO 15375:2004. Hanging devices for multiple use with infusion bottles. Requirements and test methods
04/30086336 DC 04/30086336 DC. BS ISO 8871-5. Elastomeric parts for parenterals and for devices for pharmaceutical use. Part 5. Functional requirements and testing
ISO8871-5 : 2005 EDTN 1 ISO8871-5 : 2005 EDTN 1. ISO8871-5 : 2005 Elastomeric parts for parenterals and for devices for pharmaceutical use. Part 5: Functional requirements and testing
BS ISO 11900-3:2004 BS ISO 11900-3:2004. Tools for pressing. Ball-lock punch retainers. Type E, reduced for heavy duty
BS EN ISO 294-3:2003 BS EN ISO 294-3:2003. Plastics. Injection moulding of test specimens of thermoplastic materials. Small plates
BS 7870-3.12:2001 BS 7870-3.12:2001. LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insula
BS EN ISO 13849-1:2006 BS EN ISO 13849-1:2006. Safety of machinery. Safety-related parts of control systems. General principles for design
BS ISO 2909:2002, BS 2000-226:2002 BS ISO 2909:2002, BS 2000-226:2002. Methods of test for petroleum and its products. Petroleum products. Calculation of viscosity index from kinematic viscosity
ISO/TR19358 : 2002 EDTN 1 ISO/TR19358 : 2002 EDTN 1. ISO/TR19358 : 2002 Ergonomics- Construction and application of tests for speech technology
BS ISO 22866:2005 BS ISO 22866:2005. Equipment for crop protection. Methods for field measurement of spray drift
ISO9409-1 : 2004 EDTN.3 ISO9409-1 : 2004 EDTN.3. ISO9409-1 : 2004 Manipulating industrial robots - Mechanical interfaces . Part 1: Plates
BS EN ISO 9409-1:2004 BS EN ISO 9409-1:2004. Manipulating industrial robots. Mechanical interfaces. Plates
02/124268 DC 02/124268 DC. BS ISO 11673. Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes. Determination of the fracture toughness properties
BS EN 13384-2:2003 BS EN 13384-2:2003. Chimneys. Thermal and fluid dynamic calculation methods. Chimneys serving more than one heating appliance
BS 8433:2004 BS 8433:2004. Microwavable personal warmers. Specification
ISO23753-2 : 2005 EDTN1 ISO23753-2 : 2005 EDTN1. ISO23753-2 : 2005 Soil quality - Determination of dehydrogenase activity. Part 2: Method using iodotetrazolium chloride
ISO15952 : 2006 EDTN1 ISO15952 : 2006 EDTN1. ISO15952 : 2006 Soil quality - Effects of pollutants on juvenile land snails (helicidae) - Determination of the effects on growth by soil contamination
BS EN 13597:2003 BS EN 13597:2003. Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs
BS EN ISO 13625:2002 BS EN ISO 13625:2002. Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings
DD ISO/PAS 18152:2003 DD ISO/PAS 18152:2003. Ergonomics of human-system interaction. Specification for the process assessment of human-system issues
DD ISO/TS 17450-2:2002 DD ISO/TS 17450-2:2002. Geometrical product specifications (GPS). General concepts. Basic tenets, specifications,operators and uncertainties
BS 6200-3.0:2002 BS 6200-3.0:2002. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Reference methods of analysis. Summary of methods
BS EN ISO 15546:2002 BS EN ISO 15546:2002. Petroleum and natural gas industries. Aluminium alloy drill pipe
BS ISO 10966:2005 BS ISO 10966:2005. Sports and recreational equipment. Fabrics for awnings and camping tents. Specification
BS EN 10268:2006 BS EN 10268:2006. Cold rolled steel flat products with high yield strength for cold forming. Technical delivery conditions
BS EN 10131:2006 BS EN 10131:2006. Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimension
BS EN 13895:2003 BS EN 13895:2003. Textiles. Monofilaments. Determination of tensile properties
BS 8723-1:2005 BS 8723-1:2005. Structured vocabularies for information retrieval. Guide. Definitions, symbols and abbreviations
BS EN 13772:2003 BS EN 13772:2003. Textiles and textile products. Burning behaviour. Curtains and drapes. Measurement of flame spread of vertically oriented specimens with large ignition source
DD IEC/TS 62332-1:2005 DD IEC/TS 62332-1:2005. Electrical insulation systems (EIS). Thermal evaluation of combinedliqui d and solid components. General requirements
BS ISO 10416:2002 BS ISO 10416:2002. Petroleum and natural gas industries. Drilling fluids. Laboratory testing
BS EN 13913:2003 BS EN 13913:2003. Railway applications. Rubber suspension components. Elastomer-based mechanical parts
BS IEC 61577-3:2002 BS IEC 61577-3:2002. Radiation protection instrumentation. Radon and radon decay product measuring instruments. Specific requirements for radon decay product measuring instruments
BS IEC 61577-2:2000 BS IEC 61577-2:2000. Radiation protection instrumentation. Radon and radon decay product measuring instruments. Specific requirements for radon measuring instruments
05/30086722 DC 05/30086722 DC. EN 15329. Railway applications. Braking. Brake block holder and brake shoe key for railway vehicles
05/30086725 DC 05/30086725 DC. EN 15328. Railway applications. Braking. Brake pads
BS EN 13316:2002 BS EN 13316:2002. Tanks for transport of dangerous goods. Service equipment for tanks. Pressure balanced footvalve
BS EN 13308:2002 BS EN 13308:2002. Tanks for transport of dangerous goods. Service equipment for tanks. Non pressure balanced footvalve
BS ISO 17687:2007 BS ISO 17687:2007. Transport information and control systems (TICS). General fleet management and commercial freight operations. Data dictionary and message sets for electronic ident
BS EN 658-4:2003 BS EN 658-4:2003. Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of interlaminar shear strength by compression loading of
BS EN 1071-1:2003 BS EN 1071-1:2003. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by contact probe filometer
BS EN 12617-1:2003 BS EN 12617-1:2003. Products and systems for the protection and repair of concrete structures. Test methods. Determination of linear shrinkage for polymers and surface protection sy
BS IEC 61888:2002 BS IEC 61888:2002. Nuclear power plants. Instrumentation important to safety. Determination and maintenance of trip setpoints
PD IEC TR 62096:2002 PD IEC TR 62096:2002. Nuclear power plants. Instrumentation and control. Guidance for the decision on modernization
BS EN 1007-5:2003 BS EN 1007-5:2003. Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of distribution of tensile strength and of tensile strain to fai
BS ISO 15706:2002 BS ISO 15706:2002. Information and documentation. International Standard Audiovisual Number (ISAN)
BS ISO 15152:2003 BS ISO 15152:2003. Tobacco. Determination of the content of total alkaloids as nicotine. Continuous-flow analysis method
BS ISO 15153:2003 BS ISO 15153:2003. Tobacco. Determination of the content of reducing substances. Continuous-flow analysis method
BS ISO 15154:2003 BS ISO 15154:2003. Tobacco. Determination of the content of reducing carbohydrates. Continuous-flow analysis method
BS ISO 4724:2004 BS ISO 4724:2004. Oil of cedarwood, Virginian type (Juniperus virginiana L.)
BS ISO 3849:2003 BS ISO 3849:2003. Oil of citronella, Sri Lanka type [Cymbopogon nardus (L.) W. Watson var. lenabatu Stapf.]
02/209094 DC 02/209094 DC. IEC 60335-2-XXX. Household and similar electrical appliances. Safety. Part 2-XXX: Particular requirements for commercial microwave appliances with insertion or contacting ap
BS ISO 15840:2004 BS ISO 15840:2004. Ships and marine technology. Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
BS EN ISO 1107:2003 BS EN ISO 1107:2003. Fishing nets. Netting. Basic terms and definitions
BS EN ISO 4797:2004 BS EN ISO 4797:2004. Laboratory glassware. Boiling flasks with conical ground joints
BS ISO 1126:2006 BS ISO 1126:2006. Rubber compounding ingredients. Carbon black. Determination of loss on heating
BS EN 1462:2004 BS EN 1462:2004. Brackets for eaves gutters. Requirements and testing
BS EN 61196-2:2003 BS EN 61196-2:2003. Radio-frequency cables. Specifications. Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation
BS EN 10336:2007 BS EN 10336:2007. Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming. Technical delivery conditions
BS ISO 10110-1:2006 BS ISO 10110-1:2006. Optics and photonics. Preparation of drawings for optical elements and systems. General
BS ISO 14133-1:2006 BS ISO 14133-1:2006. Optics and optical instruments. Specifications for binoculars, monoculars and spotting scopes. General purpose instruments
BS ISO 14133-2:2006 BS ISO 14133-2:2006. Optics and optical instruments. Specifications for binoculars, monoculars and spotting scopes. High performance instruments
BS EN ISO 24276:2006 BS EN ISO 24276:2006. Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. General requirements and definitions
BS ISO 14134:2006 BS ISO 14134:2006. Optics and optical instruments. Specifications for astronomical telescopes
BS EN 248:2002 BS EN 248:2002. Sanitary tapware. General specification for electrodeposited coatings of Ni-Cr
BS EN 12541:2002 BS EN 12541:2002. Sanitary tapware. Pressure flushing valves and automatic closing urinal valves PN 10
BS EN 12603:2002 BS EN 12603:2002. Glass in building. Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
HB 10216:2002 HB 10216:2002. Pre-contract Practice and Contract Administration
BS EN 1784:2003 BS EN 1784:2003. Foodstuffs. Detection of irradiated food containing fat. Gas chromatographic analysis of hydrocarbons
BS EN 1785:2003 BS EN 1785:2003. Foodstuffs. Detection of irradiated food containing fat. Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones
BS ISO 22857:2004 BS ISO 22857:2004. Health informatics. Guidelines on data protection to facilitate trans-border flows of personal health information
BS ISO 3053:2004 BS ISO 3053:2004. Oil of grapefruit (Citrus x paradisi Macfad.), obtained by expression
BS ISO 24134:2006 BS ISO 24134:2006. Industrial trucks. Additional requirements for automated functions on trucks
BS EN 13076:2003 BS EN 13076:2003. Devices to prevent pollution by backflow of potable water. Unrestricted air gap. Family A. Type A
BS EN ISO 2580-1:2002 BS EN ISO 2580-1:2002. Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 10366-1:2002 BS EN ISO 10366-1:2002. Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 8536-2:2002 BS EN ISO 8536-2:2002. Infusion equipment for medical use. Closures for infusion bottles
BS EN ISO 14284:2002 BS EN ISO 14284:2002. Steel and iron. Sampling and preparation of samples for the determination of chemical composition
BS EN 61249-4-2:2005 BS EN 61249-4-2:2005. Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad. Multifunctional expoxide woven
BS EN 61249-4-5:2005 BS EN 61249-4-5:2005. Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad Polymide, modified or unmodified
BS EN 61249-4-11:2005 BS EN 61249-4-11:2005. Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad. Non-halogenated epoxide woven
BS EN 61249-4-12:2005 BS EN 61249-4-12:2005. Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad. Non-halogenated multifuctiona
02/210280 DC 02/210280 DC. BS IEC 61755-3-1. Fibre optic connector optical interfaces. Part 3-1: Optical interface, cylindrical zirconia ferrule for non-angled physically contacting single mode fibres
BS EN 1279-3:2002 BS EN 1279-3:2002. Glass in building. Insulating glass units. Long term test method and requirements for gas leakage rate and for gas concentration tolerances
BS EN ISO 11904-1:2002 BS EN ISO 11904-1:2002. Acoustics. Determination of sound immission from sound sources placed close to the ear. Technique using a microphone in a real ear (MIRE technique)
BS EN 60076-11:2004 BS EN 60076-11:2004. Power transformers . Dry-type transformers
BS EN 13892-5:2003 BS EN 13892-5:2003. Methods of test for screed materials. Determination of wear resistance to rolling wheel of screed material for wearing layer
BS EN 13892-7:2003 BS EN 13892-7:2003. Methods of test for screed materials. Determination of wear resistance to rolling wheel of screed material with floor coverings
ISO22156 : 2004 EDTN1 ISO22156 : 2004 EDTN1 . ISO22156 : 2004 Bamboo - Structural design
ISO/TR22157-2 : 2004 EDTN.1 ISO/TR22157-2 : 2004 EDTN.1. ISO22157-2 : 2004 Bamboo - Determination of physical and mechanical properties . Part 2: Laboratory manual
BS EN 1279-1:2004 BS EN 1279-1:2004. Glass in building. Insulating glass units. Generalities, dimensional tolerances and rules for the system description
BS EN ISO 10548:2003 BS EN ISO 10548:2003. Carbon fibre. Determination of size content
BS EN 1279-2:2002 BS EN 1279-2:2002. Glass in building. Insulating glass units. Long term test method and requirements for moisture penetration
BS EN 14686:2004 BS EN 14686:2004. Fibre ropes of polyester/polyolefin dual fibres
BS EN 14685:2004 BS EN 14685:2004. Polyamide fibre ropes. Double braid construction
BS EN 14684:2004 BS EN 14684:2004. Polyester fibre ropes. Double braid construction
BS EN 14687:2004 BS EN 14687:2004. Mixed polyolefin fibre ropes
BS IEC 60747-7-5:2005 BS IEC 60747-7-5:2005. Semiconductor devices. Discrete devices. Bipolar transistors for power switching applications
BS EN 60745-2-5:2003 BS EN 60745-2-5:2003. Hand-held motor-operated electric tools. Safety. Particular requirements for circular saws
BS EN ISO 5164:2005, BS 2000-237:2005 BS EN ISO 5164:2005, BS 2000-237:2005. Petroleum products. Determination of knock characteristics of motor fuels. Research method
BS EN ISO 15547:2001 BS EN ISO 15547:2001. Petroleum and natural gas industries. Plate heat exchangers
BS EN 3960:2001 BS EN 3960:2001. Aerospace series. Gold base alloy AU-B40001 (AuNi18). Filler metal for brazing. Powder or paste
BS 7533-7:2002 BS 7533-7:2002. Pavements constructed with clay, natural stone or concrete pavers. Code of practice for the construction of pavements of natural stone setts and cobbles
BS ISO 14531-1:2002 BS ISO 14531-1:2002. Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Pipes
BS EN 10089:2002 BS EN 10089:2002. Hot rolled steels for quenched and tempered springs. Technical delivery conditions
BS EN 12697-39:2004 BS EN 12697-39:2004. Bituminous mixtures. Test methods for hot mix asphalt. Binder content by ignition
BS EN 12697-41:2005 BS EN 12697-41:2005. Bituminous mixtures. Test methods for hot mix asphalt. Resistance to de-icing fluids
BS ISO 2929:2002 BS ISO 2929:2002. Rubber hoses and hose assemblies for bulk fuel delivery by truck. Specification
BS EN 14488-5:2006 BS EN 14488-5:2006. Testing sprayed concrete. Determination of energy absorption capacity of fibre reinforced slab specimens
DD CEN/TS 13547:2006 DD CEN/TS 13547:2006. Industrial valves. Copper alloy ball valves
BS ISO 7314:2002 BS ISO 7314:2002. Aerospace. Fluid systems. Metal hose assemblies
BS EN 14598-1:2005 BS EN 14598-1:2005. Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC). Designation
BS EN 14598-3:2005 BS EN 14598-3:2005. Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC). Specific requirements
EP 202 EP 202. BSI Electronic Book. Environmental Management Systems
BS EN 13353:2003 BS EN 13353:2003. Solid wood panels (SWP). Requirements
DD CEN/TS 13354:2003 DD CEN/TS 13354:2003. Solid wood panels. Bonding quality. Test method
BS EN 14697:2005 BS EN 14697:2005. Textiles. Terry towels and terry towel fabrics. Specifications and methods of test
PAS 57:2003 PAS 57:2003. Cellar cooling equipment. Procedure for determining performance and calculating energy efficiency
CWA 14249:2002 CWA 14249:2002. FunStep (furniture product and business data) - funStep application reference model - ARM
DD 260:2003 DD 260:2003. Water quality. Enumeration of micro-organisms in water samples. Guidance on the estimation of variation of results with particular reference to the contribution of uncertainty
ISO7963 : 2006 EDTN2 ISO7963 : 2006 EDTN2. ISO 7963 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
BS EN 12503-1:2001 BS EN 12503-1:2001. Sports mats. Gymnastic mats, safety requirements
BS EN 10263-1:2001 BS EN 10263-1:2001. Steel rod, bars and wire for cold heading and cold extrusion. General technical delivery conditions
BS EN 12510:2002 BS EN 12510:2002. Wood poles for overhead lines. Strength grading criteria
ISO8619 : 2003 EDTN 3 (R08) ISO8619 : 2003 EDTN 3 (R08). ISO8619 : 2003 Plastics- Phenolic resin powder- Determination of flow distance on a heated glass plate
BS EN 13049:2003 BS EN 13049:2003. Windows. Soft and heavy body impact. Test method, safety requirements and classification
BS EN 12975-2:2001 BS EN 12975-2:2001. Thermal solar systems and components. Solar collectors. Test methods
BS EN 13143:2003 BS EN 13143:2003. Metallic and other inorganic coatings. Definitions and conventions concerning porosity
BS EN ISO 14620-1:2002 BS EN ISO 14620-1:2002. Space systems. Safety requirements. System safety
BS EN 13144:2003 BS EN 13144:2003. Metallic and other inorganic coatings. Method for quantitative measurement of adhesion by tensile test
BS EN 14601:2005 BS EN 14601:2005. Railway applications. Straight and angled end cocks for brake pipe and main reservoir pipe
ISO20725 : 2004 (R08) EDTN1 ISO20725 : 2004 (R08) EDTN1. ISO20725 : 2004 Textile machinery - Condenser for cotton spinning - Vocabulary and principles of construction
ISO20726 : 2004 (R08) EDTN1 ISO20726 : 2004 (R08) EDTN1. ISO20726 : 2004 Textile machinery - Hoppers feeders for cotton spinning - Vocabulary and principles of construction
ISO20727 : 2004 (R08) EDTN1 ISO20727 : 2004 (R08) EDTN1. ISO20767 : 2004 Textile machinery - Mixing bale openers for cotton spinning - Vocabulary principles of construction
BS EN ISO 10848-1:2006 BS EN ISO 10848-1:2006. Acoustics. Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms. Frame document
BS 848-7:2003, ISO 14694:2003 BS 848-7:2003, ISO 14694:2003. Fans for general purposes. Specifications for balancing and vibration
BS EN ISO 16348:2003 BS EN ISO 16348:2003. Metallic and other inorganic coatings. Definitions and conventions concerning appearance
BS EN 14602:2004 BS EN 14602:2004. Footwear. Test methods for the assessment of ecological criteria
BS EN 14597:2005 BS EN 14597:2005. Temperature control devices and temperature limiters for heat generating systems
BS EN 60068-2-80:2005 BS EN 60068-2-80:2005. Environmental testing. Tests. Test Fi: Vibration. Mixed mode
BS EN 50377-7-2:2004 BS EN 50377-7-2:2004. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LC-PC duplex terminated on IEC 60793-2
BS EN 50377-7-3:2004 BS EN 50377-7-3:2004. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LC-APC duplex terminated on IEC 60
BS EN 50377-7-4:2004 BS EN 50377-7-4:2004. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LC-PC simplex terminated on IEC 60793-2
BS EN 50377-9-2:2004 BS EN 50377-9-2:2004. Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type MT-RJ terminated on IEC 60793-2 ca
BS EN ISO 8092-2:2002 BS EN ISO 8092-2:2002. Road vehicles. Connections for on-board electrical wiring harnesses. Definitions, test methods and general performance requirements
BS EN ISO 10423:2001 BS EN ISO 10423:2001. Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment
BS 8204-1:2003 BS 8204-1:2003. Screeds, bases and in situ floorings. Concrete bases and cement sand levelling screeds to receive floorings. Code of practice
BS EN 60873-1:2004 BS EN 60873-1:2004. Electrical and pneumatic analogue chart recorders for use in industrial-process control systems. Methods for performance evaluation
BS 8204-2:2003 BS 8204-2:2003. Screeds, bases and in situ floorings. Concrete wearing surfaces. Code of practice
BS EN 622-1:2003 BS EN 622-1:2003. Fibreboards. Specifications. General requirements
WD/ISO/IEC13818-7 : 2003 EDTN 2 WD/ISO/IEC13818-7 : 2003 EDTN 2. ISO/IEC13818-7 : 2003 Information technology- Generic coding of moving pictures and associated audio information-. Part 7: Advanced Aud
BS EN 12697-37:2003 BS EN 12697-37:2003. Bituminous mixtures. Test methods for hot mix asphalt. Hot sand test for the adhesivity of binder on precoated chippings for HRA
BS EN 384:2004 BS EN 384:2004. Structural timber. Determination of characteristic values of mechanical properties and density
BS EN ISO 6402-1:2002 BS EN ISO 6402-1:2002. Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials. Designation syst
BS EN 459-3:2001 BS EN 459-3:2001. Building lime. Conformity evaluation
BS EN 61175:2005 BS EN 61175:2005. Industrial systems, installation and equipment and industrial products. Designation of signals
BS EN 60664-3:2003 BS EN 60664-3:2003. Insulation coordination for equipment within low-voltage systems. Use of coating, potting or moulding for protection against pollution
BIP 0014:2004 BIP 0014:2004. Guide to the evaluation of fieldbus protocols. Selecting the best fieldbus for your application
BS EN ISO 3449:2005 BS EN ISO 3449:2005. Earth-moving machinery. Falling object protective structures. Laboratory tests and performance requirements
BS EN ISO 6683:2005 BS EN ISO 6683:2005. Earth-moving machinery. Seat belts and seat belt anchorages. Performance requierments and tests
BS EN ISO 5167-1:2003 BS EN ISO 5167-1:2003. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. General principles and requir
BS EN 62271-202:2007 BS EN 62271-202:2007. High-voltage switchgear and controlgear. High voltage/low voltage prefabricated substation
BS EN 1051-1:2003 BS EN 1051-1:2003. Glass in building. Glass blocks and glass pavers. Definitions and description
BS EN ISO 11733:2004 BS EN ISO 11733:2004. Water quality. Determination of the elimination and biodegradability of organic compounds in an aqueous medium. Activated sludge simulation test
BS EN ISO 9862:2005 BS EN ISO 9862:2005. Geosynthetics. Sampling and preparation of test specimens
BS EN ISO 9863-1:2005 BS EN ISO 9863-1:2005. Geosynthetics. Determination of thickness at specified pressures. Single layers
BS EN ISO 9864:2005 BS EN ISO 9864:2005. Geosynthetics. Test method for the determination of mass per unit area of geotextiles and geotextile-related products
BS EN 14030:2001 BS EN 14030:2001. Geotextiles and geotextile-related products. Screening test method for determining the resistance to acid and alkaline liquids
BS EN 61811-10:2003 BS EN 61811-10:2003. Electromechanical all-or-nothing relays. Sectional specification. Relays for industrial application
BS EN 61811-11:2003 BS EN 61811-11:2003. Electromechanical all-or-nothing relays. Blank detail specification. Relays for industrial application
BS EN 60704-2-10:2004 BS EN 60704-2-10:2004. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for electric cooking ran
ISO22743 : 2006 EDTN1 ISO22743 : 2006 EDTN1. ISO22743 : 2006 Water quality - Determination of sulfates. Method of continuousflow anal ysis (CFA)
06/30088025 DC 06/30088025 DC. ISO 17378-2. Water quality. Determination of arsenic. Part 2. Method using hydride generation atomic absorption spectrometry (HG-AAS)
06/30088031 DC 06/30088031 DC. ISO 17379-2. Water quality. Determination of selenium. Part 2. Method using hydride generation atomic absorption spectrometry (HG-AAS)
BS ISO 18649:2004 BS ISO 18649:2004. Mechanical vibration. Evaluation of measurement results from dynamic tests and investigations on bridges
BS EN ISO 9692-4:2003 BS EN ISO 9692-4:2003. Welding and allied processes. Joint preparation. Clad steels
BS EN 60335-2-34:2002 BS EN 60335-2-34:2002. Specification for safety of household and similar electrical appliances. Particular requirements for motor-compressors
BS ISO 3888-2:2002 BS ISO 3888-2:2002. Passenger cars. Test track for a severe lane-change manoeuvre. Obstacle avoidance
BS ISO/IEC 18028-2:2006 BS ISO/IEC 18028-2:2006. Information technology. Security techniques. IT network security. Network security architecture
BS ISO 4498:2005 BS ISO 4498:2005. Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness
BS ISO/IEC 18028-3:2005 BS ISO/IEC 18028-3:2005. Information technology. Security techniques. IT network security. Securing communications between networks using security gateways
BS ISO/IEC 18028-4:2005 BS ISO/IEC 18028-4:2005. Information technology. Security techniques. IT network security. Securing remote access
BS ISO 857-2:2005 BS ISO 857-2:2005. Welding and allied processes. Vocabulary. Soldering and brazing processes and related terms
BS ISO 7539-9:2003 BS ISO 7539-9:2003. Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
BS ISO 15987:2003 BS ISO 15987:2003. Plastics. Film and sheeting. Biaxially oriented polyamide (nylon) films
BS EN 13226:2002 BS EN 13226:2002. Wood flooring. Solid parquet elements with grooves and/or tongues
BS EN 49-1:2005 BS EN 49-1:2005. Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival. Application by surface treatme
BS EN 49-2:2005 BS EN 49-2:2005. Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival. Application by impregnation (l
BS EN 14519:2005 BS EN 14519:2005. Solid softwood panelling and cladding. Softwood machined profiles with tongue and groove
BS EN 13121-1:2003 BS EN 13121-1:2003. GRP tanks and vessels for use above ground. Raw materials. Specification conditions and acceptance conditions
BS EN 61837-4:2004 BS EN 61837-4:2004. Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. Hybrid enclosure outlines
BS ISO 15037-2:2002 BS ISO 15037-2:2002. Road vehicles. Vehicle dynamics test methods. General conditions for heavy vehicles and buses
BS EN ISO 2342:2003 BS EN ISO 2342:2003. Slotted headless screws with shank
BS ISO 20462-1:2005 BS ISO 20462-1:2005. Photography. Psychophysical experimental methods for estimating image quality. Overview of psychophysical elements
BS ISO 20462-3:2005 BS ISO 20462-3:2005. Photography. Psychophysical experimental methods for estimating image quality. Quality ruler method
BS EN ISO 21269:2004 BS EN ISO 21269:2004. Hexagon socket head cap screws with metric fine pitch thread
BS EN 55016-1-3:2006 BS EN 55016-1-3:2006. Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Ancillary equipment. Di
BS EN 14717:2005 BS EN 14717:2005. Welding and allied processes. Environmental check list
BS EN 402:2003 BS EN 402:2003. Respiratory protective devices. Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape
BS EN 50090-7-1:2004 BS EN 50090-7-1:2004. Home and building electronic systems (HBES). System management. Management procedures
BS EN 50090-5-2:2004 BS EN 50090-5-2:2004. Home and building electronic systems (HBES). Media and media dependent layers. Network based on HBES Class 1, Twisted Pair
BS EN 50090-3-2:2004 BS EN 50090-3-2:2004. Home and building electronic systems (HBES). Aspects of application. User process for HBES Class 1
BS EN 50090-4-1:2004 BS EN 50090-4-1:2004. Home and building electronic systems (HBES). Media independent layers. Application layer for HBES Class 1
BS EN 50090-4-2:2004 BS EN 50090-4-2:2004. Home and building electronic systems (HBES). Media independent layers. Transport layer, network layer and general parts of data link layer for HBES Class 1
BS ISO 12097-1:2002 BS ISO 12097-1:2002. Road vehicles. Airbag components. Vocabulary
BS ISO 12097-3:2002 BS ISO 12097-3:2002. Road vehicles. Airbag components. Testing of inflator assemblies
BS ISO 12345:2002 BS ISO 12345:2002. Diesel engines. Cleanliness assessment of fuel injection equipment
BS ISO 19959:2005 BS ISO 19959:2005. Visual examination of the surface condition of investment castings. Steel, nickel alloys and cobalt alloys
BS EN 55016-1-4:2004 BS EN 55016-1-4:2004. Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Ancillary equipment. Ra
BS EN ISO 10642:2004 BS EN ISO 10642:2004. Hexagon socket countersunk head screws
BS 4515-1:2004 BS 4515-1:2004. Specification for welding of steel pipelines on land and offshore. Carbon and carbon manganese steel pipelines
BS EN ISO 4028:2003 BS EN ISO 4028:2003. Hexagon socket set screws with dog point
BS EN ISO 4762:2004 BS EN ISO 4762:2004. Hexagon socket head cap screws
BS ISO 7176-21:2003 BS ISO 7176-21:2003. Wheelchairs. Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters
BS EN 13739-2:2003 BS EN 13739-2:2003. Agricultural machinery. Solid fertilizer broadcasters and full width distributors. Environmental protection. Test methods
BS EN ISO 5167-2:2003 BS EN ISO 5167-2:2003. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. Orifice plates
ISO/ASTM51401 : 2003 EDTN2 ISO/ASTM51401 : 2003 EDTN2. ISO/ASTM51401 : 2003 Practice for use of a dichromate dosimetry system
BS EN 1360:2005 BS EN 1360:2005. Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
BS EN 13483:2005 BS EN 13483:2005. Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
BS 903-5:2004 BS 903-5:2004. Physical testing of rubber. Guide to the application of rubber testing to finite element analysis
BS 594-2:2002 BS 594-2:2002. Hot rolled asphalt for roads and other paved areas. Specification for transport, laying and compaction of hot rolled asphalt
BS IEC 61111:1992 BS IEC 61111:1992. Matting of insulating material for electrical purposes
BS EN ISO 3679:2004, BS 2000-523:2004 BS EN ISO 3679:2004, BS 2000-523:2004. Methods of test for petroleum and its products. BS 2000-523. Determination of flash point. Rapid equilibrium closed cup met
BS IEC 61112:1992 BS IEC 61112:1992. Blankets of insulating material for electrical purposes
BS EN ISO 3680:2004, BS 2000-524:2004 BS EN ISO 3680:2004, BS 2000-524:2004. Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup
BS ISO 2790:2004 BS ISO 2790:2004. Belt drives. V-belts for the automotive industry and corresponding pulleys. Dimensions
BS EN 46-1:2005 BS EN 46-1:2005. Wood preservatives. Determination of the preventive action against Hylotrupes bajalus (Linnaeus). Larvicidial effect (laboratory method)
BS EN 335-1:2006 BS EN 335-1:2006. Durabiltity of wood and wood-based products. Definitions of use classes. General
BS EN 335-2:2006 BS EN 335-2:2006. Durability of wood and wood-based products. Definition of use classes. Application to solid wood
BS ISO 1268-9:2003 BS ISO 1268-9:2003. Fibre-reinforced plastics. Methods of producing test plates. Moulding of GMT/STC
BS EN 13301:2003, BS 2000-504:2003 BS EN 13301:2003, BS 2000-504:2003. Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of staining tendency of bitumens
BS EN 13302:2003, BS 2000-505:2003 BS EN 13302:2003, BS 2000-505:2003. Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of viscosity of bitumen using a rot
BS EN ISO 4254-1:2005 BS EN ISO 4254-1:2005. Agricultural machinery. Safety. General requirements
PD IEC/TR 62152:2004 PD IEC/TR 62152:2004. Background of terms and definitions of cascaded two-ports
BS EN 62150-2:2004 BS EN 62150-2:2004. Fibre optic active components and devices. Test and measurement procedures. ATM-PON transceivers
PD CLC/TR 50403:2002 PD CLC/TR 50403:2002. Standardization and the liberalization of the energy market
BS ISO 13674-1:2003 BS ISO 13674-1:2003. Road vehicles. Test method for the quantification of on-centre handling. Weave test
BS 2000-143:2001 BS 2000-143:2001. Methods of test for petroleum and its products. Determination of asphaltenes (heptane insolubles) in crude petroleum and petroleum products
DD CEN/TS 15083-2:2005 DD CEN/TS 15083-2:2005. Durability of wood and wood-based products. Determination of the natural durability of solid wood against wood-destroying fungi, test methods. Soft-rotti
DD CEN/TS 12037:2003 DD CEN/TS 12037:2003. Wood preservatives. Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact. Horizontal
BS 2000-313:2001 BS 2000-313:2001. Methods of test for petroleum and its products. Determination of air release of lubricating and hydraulic oils
PD CR 14378:2002, CR 14378:2002 PD CR 14378:2002, CR 14378:2002. Ventilation for buildings. Experimental determination of mechanical energy loss coefficients of air handling components
BS ISO 12649:2004 BS ISO 12649:2004. Graphic technology. Safety requirements for binding and finishing systems and equipment
BS ISO 23833:2006 BS ISO 23833:2006. Microbeam analysis. Electron probe microanalysis (EPMA). Vocabulary
BS ISO 15379-1:2004 BS ISO 15379-1:2004. Carbonaceous materials for the production of aluminium. Cathode block materials. Determination of the expansion due to sodium penetration with application of p
BS ISO 15379-2:2004 BS ISO 15379-2:2004. Carbonaceous materials for the production of aluminium. Cathode block materials. Determination of the expansion due to sodium penetration without application o
BS ISO 17544:2004 BS ISO 17544:2004. Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Determination of rammability of unbaked pastes
BS ISO 14427:2004 BS ISO 14427:2004. Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Preparation of unbaked test specimens and determination of apparent dens
BS ISO 20202:2004 BS ISO 20202:2004. Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Preparation of baked test pieces and determination of loss on baking
BS ISO 14428:2004 BS ISO 14428:2004. Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Expansion/shrinkage during baking
BS EN 13863-2:2003 BS EN 13863-2:2003. Concrete pavements. Test method for the determination of the bond between two layers
BS ISO 8858-3:2004 BS ISO 8858-3:2004. Hard coal. Froth flotation testing. Release evaluation
PD 2379:2005 PD 2379:2005. Register of colours of manufacturers' identification threads for electric cables and cords. Tenth Edition
BS EN 298:2003 BS EN 298:2003. Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
BS EN 12506:2003 BS EN 12506:2003. Characterization of waste. Analysis of eluates. Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr VI, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn
BS EN 13370:2003 BS EN 13370:2003. Characterization of waste. Analysis of eluates. Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN-, F-
BS EN 10225:2001 BS EN 10225:2001. Weldable structural steels for fixed offshore structures. Technical delivery conditions
BS EN 60086-2:2007 BS EN 60086-2:2007. Primary batteries. Physical and electrical specifications
BS EN 14607-1:2004 BS EN 14607-1:2004. Space engineering. Mechanical. Thermal control
BS EN 14607-2:2004 BS EN 14607-2:2004. Space engineering. Mechanical. Structural
BS EN 14607-5-1:2004 BS EN 14607-5-1:2004. Space engineering. Mechanical. Liquid and electric propulsion for spacecraft
BS EN 14607-6:2004 BS EN 14607-6:2004. Space engineering. Mechanical. Pyrotechnics
BS EN 14607-7:2004 BS EN 14607-7:2004. Space engineering. Mechanical. Mechanical parts
BS EN 14607-8:2004 BS EN 14607-8:2004. Space engineering. Mechanical. Materials
BS EN 61982-1:2006 BS EN 61982-1:2006. Secondary batteries for the propulsion of electric road vehicles. Test parameters
BS EN 14612:2003 BS EN 14612:2003. Space product assurance. Verification and approval of automatic machine wave soldering
03/100166 DC 03/100166 DC. IEC 60603-7-5. Ed.1.0. Connectors for electronic equipment. Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with freque
BS EN ISO 14155-2:2003 BS EN ISO 14155-2:2003. Clinical investigation of medical devices for human subjects. Clinical investigation plans
BS EN 61076-3-112:2006 BS EN 61076-3-112:2006. Connectors for electronic equipment. Rectangular connectors. Detail specification for rectangular connectors with four contacts for high performance seri
03/100165 DC 03/100165 DC. IEC 60603-7-2. Ed.1.0. Connectors for electronic equipment. Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmission with frequ
03/100167 DC 03/100167 DC. IEC 60603-3-105 Ed.1 Connectors for electronic equipment. Part 3-105. Detail specification for 4 pair balanced, individually shielded, fixed and free connectors with charact
BS EN ISO 10424-1:2004 BS EN ISO 10424-1:2004. Petroleum and natural gas industries. Rotary drilling equipment. Rotary drill stem elements
PD IEC TR 60878:2003 PD IEC TR 60878:2003. Graphical symbols for electrical equipment in medical practice
BS ISO 14507:2003 BS ISO 14507:2003. Soil quality. Pretreatment of samples for determination of organic contaminants
BS EN ISO 23953-1:2005 BS EN ISO 23953-1:2005. Refrigerated display cabinets. Vocabulary
BS ISO 16014-2:2003 BS ISO 16014-2:2003. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Universal calibration method
BS EN ISO 23953-2:2005 BS EN ISO 23953-2:2005. Refrigerated display cabinets. Classification, requirements and test conditions
BS EN 60086-5:2005 BS EN 60086-5:2005. Primary batteries. Safety of batteries with aqueous electrolyte
BS EN ISO 5840:2005 BS EN ISO 5840:2005. Cardiovascular implants. Cardiac valve prostheses
BS EN 60950-22:2006 BS EN 60950-22:2006. Information technology equipment. Safety . Equipment installed outdoors
BS EN 14605:2005 BS EN 14605:2005. Protective clothing against liquid chemicals. Performance requirements for clothing with liquid-tight (type 3) or spray-tight (type 4) connections, including items p
BS ISO 7612:2006 BS ISO 7612:2006. Diesel engines. Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions
BS EN ISO 2639:2002 BS EN ISO 2639:2002. Steels. Determination and verification of the depth of carburized and hardened cases
ISO9328-3 : 2004 EDTN2 ISO9328-3 : 2004 EDTN2. ISO9328-3 : 2004 Steel flat products for pessure purposes - Technical delivery conditions. Part 3: Weldable fine grain steels, normalized
ISO9328-5 : 2004 EDTN2 ISO9328-5 : 2004 EDTN2. ISO9328-5 : 2004 Steel plates and strips for pressure purposes - Technical delivery conditions . Part 5: Weldable fine grain steels, thermomechanically r
ISO9328-6 : 2004 EDTN1 ISO9328-6 : 2004 EDTN1. ISO9328-6 : 2004 Steel flat productsfor pressure purposes - Technical delivery conditions - . Part 6: Weldable fine grain steels, quenched and tempered
BS 6701:2004 BS 6701:2004. Telecommunications equipment and telecommunications cabling. Specification for installation, operation and maintenance
BS EN 60793-2-50:2004 BS EN 60793-2-50:2004. Optical fibres. Products specification. Sectional specification for class B single-mode fibres
BS EN 13410:2001 BS EN 13410:2001. Gas-fired overhead radiant heaters. Ventilation requirements for non-domestic premises
BS EN 10263-4:2001 BS EN 10263-4:2001. Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for steels for quenching and tempering
ISO8796 : 2004 EDTN 2 ISO8796 : 2004 EDTN 2. ISO8796 : 2004 Polyethylene PE 32 and PE 40 pipes for irrigation laterals - Susceptibility to environmental stress cracking induced by insert-type fittings
BS ISO 9084:2000 BS ISO 9084:2000. Calculation of load capacity of spur and helical gears. Application to high speed gears and gears of similar requirements
BS ISO/IEC 9945-1:2002 BS ISO/IEC 9945-1:2002. Information technology. Portable operating system interface (POSIX). Base Definitions
WD/ERROR WD/ERROR. BSEN16241 : 2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe fittin products (PENT)
BS EN ISO 8496:2004 BS EN ISO 8496:2004. Metallic materials. Tube. Ring tensile test
BS EN ISO 16671:2003 BS EN ISO 16671:2003. Ophthalmic implants. Irrigating solutions for ophthalmic surgery
BS EN 60439-4:2004 BS EN 60439-4:2004. Low-voltage switchgear and controlgear assemblies. Particular requirements for assemblies for construction sites (ACS)
BS EN 9121:2005 BS EN 9121:2005. Aerospace series. Quality management systems. Assessment applicable to stockist distributors
BS EN ISO 21627-1:2003 BS EN ISO 21627-1:2003. Plastics. Epoxy resins. Determination of chlorine content. Inorganic chlorine
BS EN ISO 21627-2:2003 BS EN ISO 21627-2:2003. Plastics. Epoxy resins. Determination of chlorine content. Easily saponifiable chlorine
BS EN ISO 21627-3:2003 BS EN ISO 21627-3:2003. Plastics. Epoxy resins. Determination of chlorine content. Total chlorine
BS ISO/IEC 15420:2000 BS ISO/IEC 15420:2000. Information technology. Automatic identification and data capture techniques. Bar code symbology specification. EAN/UPC
BS EN 61788-11:2003 BS EN 61788-11:2003. Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb3Sn composite superconductors
BS ISO 7769:2006 BS ISO 7769:2006. Textiles. Test method for assessing the appearance of creases in fabrics after cleansing
BS ISO 7768:2006 BS ISO 7768:2006. Textiles. Test method for assessing the smoothness appearance of fabrics after cleansing
ISO633 : 2007 EDTN2 ISO633 : 2007 EDTN2. ISO 633 Cork - Vocabulary
BS ISO 18118:2004 BS ISO 18118:2004. Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Guide to the use of experimentally determined relative sensitivity fac
BS ISO 19318:2004 BS ISO 19318:2004. Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of methods used for charge control and charge correction
BS 8446:2005 BS 8446:2005. Specification for the installation and maintenance of open-flued, non-domestic gas-fired laundry appliances
BS EN ISO 20863:2004 BS EN ISO 20863:2004. Footwear. Test method for stiffeners and toepuffs. Bondability
BS EN ISO 20864:2004 BS EN ISO 20864:2004. Footwear. Test method for stiffeners and toepuffs. Mechanical characteristics
BS EN 45502-2-1:2003 BS EN 45502-2-1:2003. Active implantable medical devices. Particular requirements for active implantable medical devices intended to treat bradyarrhythmia (cardiac pacemakers)
BS EN ISO 5366-1:2004 BS EN ISO 5366-1:2004. Anaesthetic and respiratory equipment. Tracheostomy tubes. Tubes and connectors for use in adults
BS EN ISO 10524-2:2006 BS EN ISO 10524-2:2006. Pressure regulators for use with medical gases. Manifold and line pressure regulators
BS EN ISO 8666:2002 BS EN ISO 8666:2002. Small craft. Principal data
PD CLC/TR 50404:2003 PD CLC/TR 50404:2003. Electrostatics. Code of practice for the avoidance of hazards due to static electricity
BS EN ISO 8222:2002 BS EN ISO 8222:2002. Petroleum measurement systems. Calibration. Temperature corrections for use when calibrating volumetric proving tanks
BS 5656-2:2004 BS 5656-2:2004. Escalator and moving walks. Safety rules for the construction and installation of escalators and moving walks. Code of practice for the selection, installation and locat
BS EN ISO 3715-1:2004 BS EN ISO 3715-1:2004. Ships and marine technology. Propulsion plants for ships. Vocabulary for geometry of propellers
BS 8430:2005 BS 8430:2005. Terminology work. Fundamentals made simple
BS EN ISO 9614-3:2002 BS EN ISO 9614-3:2002. Acoustics. Determination of sound power levels of noise sources using sound intensity. Precision method for measurement by scanning
BS EN ISO 9999:2002 BS EN ISO 9999:2002. Technical aids for persons with disabilities. Classification and terminology
BS EN 12272-2:2003 BS EN 12272-2:2003. Surface dressing. Test methods. Visual assessment of defects
BS EN ISO 105-C12:2006 BS EN ISO 105-C12:2006. Textiles. Tests for colour fastness. Colour fastness to industrial laundering
BS ISO 22608:2004 BS ISO 22608:2004. Protective clothing. Protection against liquid chemicals. Measurement of repellency, retention, and penetration of liquid pesticide formulations through protective
ISO10303-227 : 2005 CD-ROM EDTN2 ISO10303-227 : 2005 CD-ROM EDTN2. ISO10303-227 : 2005 Industrial automation systems and integration. Product data representation and exchange. Part 227. Application pr
03/301805 DC 03/301805 DC. IEC 60695-11-6. TS. Ed.1. Fire hazard testing. Part 11-6: Test flames. Comparative burning characteristics of tubular polymeric materials supported in a vertical position. A
BS EN 62356-3:2004 BS EN 62356-3:2004. Video recording. 12,65 mm type D-11 format. Data mapping over SDTI
BS EN 62356-2:2004 BS EN 62356-2:2004. Video recording. 12,65 mm type D-11 format. Picture compression and data stream
BS EN 62356-1:2004 BS EN 62356-1:2004. Video recording. 12,65 mm TYPE D-11 format. Tape recording
BS EN ISO 14915-1:2002 BS EN ISO 14915-1:2002. Software ergonomics for multimedia user interfaces. Design principles and framework
BS EN 61603-8-1:2004 BS EN 61603-8-1:2004. Transmission of audio and/or video and related signals using infrared radiation . Digital audio and related signals
BS EN 62298-3:2005 BS EN 62298-3:2005. Teleweb application. Superteletext profile
BS EN 62298-2:2005 BS EN 62298-2:2005. Teleweb application. Delivery methods
BS EN 62298-1:2005 BS EN 62298-1:2005. Teleweb application. General description
BS EN 62297-2:2005 BS EN 62297-2:2005. Triggering messages for broadcast applications. Transport methods
WD/ISO/IECTR14496-7 : 2002(CD-ROM)HEADER WD/ISO/IECTR14496-7 : 2002(CD-ROM)HEADER. ISO/IECTR14496-7 : 2002 Information technology- Coding of audio-visual objects. Part 7: Optimised reference software
BS EN 62297-1:2005 BS EN 62297-1:2005. Triggering messages for broadcast applications. Format
CWA 14642:2003 CWA 14642:2003. Electrical interface for domestic cogeneration. Requirements for distribution network connection for micro cogeneration systems for domestic use up to 16 A per phase low
CWA 14641:2003 CWA 14641:2003. Security management system of the secured printing producers section
CWA 14646:2003 CWA 14646:2003. Requirements for the installation of post-tensioning kits for prestressing of structures and qualification of the specialist company and its personnel
CWA 14365:2003 CWA 14365:2003. Guide on the use of electronic signatures
CWA 14644:2003 CWA 14644:2003. Quality assurance standards
CWA 14645:2003 CWA 14645:2003. Availability of alternative language versions of a learning resource in IEEE LOM
CWA 14643:2003 CWA 14643:2003. Internationalisation of the IEEE learning object metadata
BS EN 60645-5:2005 BS EN 60645-5:2005. Electroacoustics. Audiometric equipment. Instruments for the measurement of aural acoustic impedance/admittance
BS ISO 13674-2:2006 BS ISO 13674-2:2006. Road vehicles. Test method for the quantification of on-centre handling. Transition test
ISO11555-1 : 2003 EDTN 1 ISO11555-1 : 2003 EDTN 1. ISO11555-1 : 2003 Road vehicles- Stabilizing devices for caravans and light trailers -. Part 1: Integrated stabilizers
BS EN 60974-11:2004 BS EN 60974-11:2004. Arc welding equipment. Electrode holders
BS ISO 3968:2001 BS ISO 3968:2001. Hydraulic fluid power. Filters. Evaluation of differential pressure versus flow characteristics
DD CEN/TS 12201-7:2003 DD CEN/TS 12201-7:2003. Plastics piping systems for water supply. Polyethylene (PE). Guidance for the assessment of conformity
BS EN 60704-2-6:2004 BS EN 60704-2-6:2004. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for tumble dryers
BS ISO 22369-1:2006 BS ISO 22369-1:2006. Crop protection equipment. Drift classification of spraying equipment. Classes
BS 5701-3:2003 BS 5701-3:2003. Guide to quality control and performance improvement using qualitative (attribute) data. Technical aspects of attribute charting. Special situation handling
BS 5701-4:2003 BS 5701-4:2003. Guide to quality control and performance improvement using qualitative (attribute) data. Attribute inspection performance control and improvement
BS EN 636:2003 BS EN 636:2003. Plywood. Specifications
BS EN 71-10:2005 BS EN 71-10:2005. Safety of toys. Organic chemical compounds. Sample preparation and extraction
BS EN 60079-15:2003 BS EN 60079-15:2003. Electrical apparatus for explosive gas atmospheres. Type of protection "n"
BS EN 312:2003 BS EN 312:2003. Particleboards. Specifications
BS EN ISO 17511:2003 BS EN ISO 17511:2003. In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control
BS EN ISO 18153:2003 BS EN ISO 18153:2003. In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values for catalytic concentration of enzy
BS EN 62271-110:2005 BS EN 62271-110:2005. High-voltage switchgear and controlgear. Inductive load switching
BS EN 61241-18:2004 BS EN 61241-18:2004. Electrical apparatus for use in the presence of combustible dust. Protection by encapsulation 'mD'
BS EN ISO 6876:2002 BS EN ISO 6876:2002. Dental root canal sealing materials
BS EN 61672-1:2003 BS EN 61672-1:2003. Electroacoustics. Sound level meters. Specifications
BS EN 62304:2006 BS EN 62304:2006. Medical device software. Software life-cycle processes
BS EN 60079-17:2003 BS EN 60079-17:2003. Electrical apparatus for explosive gas atmospheres. Inspection and maintenance of electrical installations in hazardous areas (other than mines)
BS EN 60079-14:2003 BS EN 60079-14:2003. Electrical apparatus for explosive gas atmospheres. Electrical installations in hazardous areas (other than mines)
BS EN ISO 14880-2:2006 BS EN ISO 14880-2:2006. Optics and photonics. Microlens arrays. Test methods for wavefront aberrations
KIT 117 KIT 117. BS 5703 Series Kit on Cusum Methods
BS EN 61804-2:2004 BS EN 61804-2:2004. Function blocks (FB) for process control. Specification of FB concept and electronic device description language (EDDL)
BS EN 60836:2005 BS EN 60836:2005. Specifications for unused silicone insulating liquids for electrotechnical purposes
ISO/IEC9318-4 : 2003 EDTN 2 ISO/IEC9318-4 : 2003 EDTN 2. ISO/IEC9318-4 : 2003 Information technology- Intelligent Peripheral Interface -. Part 4: Device generic command set for magnetic tape drives (I
BS EN 61788-2:1999 BS EN 61788-2:1999. Superconductivity. Critical current measurement. DC critical current of Nb3Sn composite superconductors
BS EN 61788-3:2001 BS EN 61788-3:2001. Superconductivity. Critical current measurement. DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors
BS EN 61788-7:2002 BS EN 61788-7:2002. Superconductivity. Electronic characteristic measurements. Surface resistance of superconductors at microwave frequencies
PD IEC TR 61131-8:2003 PD IEC TR 61131-8:2003. Programmable controllers. Guidelines for the application and implementation of programming languages
BS EN 61788-8:2003 BS EN 61788-8:2003. Superconductivity. AC loss measurements. Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field
BS EN 61788-9:2005 BS EN 61788-9:2005. Superconductivity. Measurements for bulk high temperature superconductors. Trapped flux density of large grain oxide superconductors
BS EN 61788-13:2003 BS EN 61788-13:2003. Superconductivity. AC loss measurements. Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
BS EN 14621:2005 BS EN 14621:2005. Textiles. Multifilament yarns. Methods of test for textured or non-textured filament yarns
BS EN 61280-4-4:2006 BS EN 61280-4-4:2006. Fibre optic communication subsystem basic test procedures. Cable plants and links. Polarization mode dispersion measurement for installed links
BS EN 14624:2005 BS EN 14624:2005. Performances of mobile leak detectors and of room controllers of halogenated refrigerants
BS 9251:2005 BS 9251:2005. Sprinkler systems for residential and domestic occupancies. Code of practice
BS ISO 1641-1:2003 BS ISO 1641-1:2003. End mills and slot drills. Milling cutters with cylindrical shanks
BS ISO 1641-3:2003 BS ISO 1641-3:2003. End mills and slot drills. Milling cutters with 7/24 taper shanks
BS 2975-1:2004 BS 2975-1:2004. Sampling and analysis of glass-making sands. Methods for sampling and physical testing of glass-making sands
BS ISO 16587:2004 BS ISO 16587:2004. Mechanical vibration and shock. Performance parameters for condition monitoring of structures
BS EN 14628:2005 BS EN 14628:2005. Ductile iron pipes, fittings and accessories. External polythene coating for pipes. Requirements and test methods
BS EN ISO 2505:2005 BS EN ISO 2505:2005. Thermoplastics pipes. Longitudinal reversion. Test methods and parameters
BS ISO 10231:2003 BS ISO 10231:2003. Motorcycle tyres. Test methods for verifying tyre capabilities
BS EN 614-1:2006 BS EN 614-1:2006. Safety of machinery. Ergonomic design principles. Terminology and general principles
BS EN 50362:2003 BS EN 50362:2003. Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits
BS ISO 6336-5:2003 BS ISO 6336-5:2003. Calculation of load capacity of spur and helical gears. Strength and quality of materials
BS EN ISO 19118:2006 BS EN ISO 19118:2006. Geographic information. Encoding
BS ISO 13542:2006 BS ISO 13542:2006. Paper and board. Specification for internal diameters of cores for reels
BS EN 13811:2003 BS EN 13811:2003. Sherardizing. Zinc diffusion coatings on ferrous products. Specification
BS EN 14616:2004 BS EN 14616:2004. Thermal spraying. Recommendations for thermal spraying
BS EN ISO 14923:2003 BS EN ISO 14923:2003. Thermal spraying. Characterization and testing of thermally sprayed coatings
BS EN 881:2004 BS EN 881:2004. Chemicals used for treatment of water intended for human consumption. Aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric) and aluminium chloride hyd
BS EN 882:2004 BS EN 882:2004. Chemicals used for treatment of water intended for human consumption. Sodium aluminate
BS EN 883:2004 BS EN 883:2004. Chemicals used for treatment of water intended for human consumption. Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulfate
BS EN 888:2004 BS EN 888:2004. Chemicals used for treatment of water intended for human consumption. Iron (III) chloride
BS EN 889:2004 BS EN 889:2004. Chemicals used for treatment of water intended for human consumption. Iron (II) sulfate
BS EN 890:2004 BS EN 890:2004. Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate liquid
BS EN 891:2004 BS EN 891:2004. Chemicals used for treatment of water intended for human consumption. Iron (III) chloride sulfate
BS EN 12902:2004 BS EN 12902:2004. Products used for treatment of water intended for human consumption. Inorganic supporting and filtering materials. Methods of test
PD 6686:2006 PD 6686:2006. Guidance on directives, regulations and standards related to prevention of fire and explosion in the process industries
BS EN ISO 12625-7:2007 BS EN ISO 12625-7:2007. Tissue paper and tissue products . Determination of optical properties
BS EN 13740-1:2003 BS EN 13740-1:2003. Agricultural machinery. Solid fertilizer line-distributors. Environmental protection. Requirements
BS EN 60774-5:2004 BS EN 60774-5:2004. Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS. D-VHS
BS EN 61603-7:2003 BS EN 61603-7:2003. Transmission systems for audio and/or video and related signals using infra-red radiation. Digital audio signals for conference and similar applications
BS EN 62345:2005 BS EN 62345:2005. ID format for 50 mm magneto-optical disc system
03/103717 DC 03/103717 DC. IEC 60730-2-4. Automatic controls for household and similar use. Part 2: Particular requirements. Section 4: Thermal motor protectors for motor-compressors or hermatic and s
PD ISO/TR 16765:2003 PD ISO/TR 16765:2003. Comparison of worldwide safety standards on lifts for firefighters
BS EN 13186:2004 BS EN 13186:2004. Feather and down. Specification feather and down filled bedding articles
DD ISO/TS 5658-1:2006 DD ISO/TS 5658-1:2006. Reaction to fire tests. Spread of flame. Guidance on flame spread
BS ISO 5658-2:2006 BS ISO 5658-2:2006. Reaction to fire tests. Spread of flame. Lateral spread on building and transport products in vertical configuration
06/30090268 DC 06/30090268 DC. ISO 21489. Fire tests. Method of measurement of gases using fourier transform infrared spectroscopy (FTIR) in cumulative smoke test
BS EN 12255-16:2005 BS EN 12255-16:2005. Wastewater treatment plants. Physical (mechanical) filtration
BS EN 13796-2:2005 BS EN 13796-2:2005. Safety requirements for cableway installations designed to carry persons. Carriers. Slipping resistance tests for grips
BS ISO 5687:1999 BS ISO 5687:1999. Equipment for harvesting. Combine harvesters. Determination and designation of grain tank capacity and unloading device performance
DD CEN/TS 14494:2003 DD CEN/TS 14494:2003. Leather. Chemical tests. Determination of the content of pentachlorophenol in leather
BS EN 12965:2003 BS EN 12965:2003. Tractors and machinery for agriculture and forestry. Power take-off (PTO) drive shafts and their guards. Safety
BS EN 14627:2005 BS EN 14627:2005. Foodstuffs. Determination of trace elements. Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure
BS EN ISO 16484-2:2004 BS EN ISO 16484-2:2004. Building automation and control systems (BACS). Hardware
BS ISO 7971-1:2003 BS ISO 7971-1:2003. Cereals. Determination of bulk density, called "mass per hectolitre". Reference method
BS 6576:2005 BS 6576:2005. Code of practice for diagnosis of rising damp in walls of buildings and installation of chemical damp-proof courses
ISO20179 : 2005 EDTN1 ISO20179 : 2005 EDTN1. ISO20179 : 2005 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC)
ISO13408-3 : 2006 EDTN1 ISO13408-3 : 2006 EDTN1. ISO 13408-3 Aseptic processing of health care products - . Part 3: Lyophilization
ISO13408-4 : 2005 EDTN1 ISO13408-4 : 2005 EDTN1. ISO13408-4 : 2005 Aseptic processing of health care products. Part 4 : Clean-in-place technologies
ISO13408-5 : 2006 EDTN1 ISO13408-5 : 2006 EDTN1. ISO 13408-5 Aseptic processing of health care products - . Part 5: Sterilization in place
BS EN 60676:2002, IEC 60676:2002 BS EN 60676:2002, IEC 60676:2002. Industrial electroheating equipment. Test methods for direct arc furnaces
BS EN 12057:2004 BS EN 12057:2004. Natural stone products. Modular tiles. Requirements
BS EN 12058:2004 BS EN 12058:2004. Natural stone products. Slabs for floors and stairs. Requirements
BS EN 1469:2004 BS EN 1469:2004. Natural stone products. Slabs for cladding. Requirements
BS EN 61360-2:2002, IEC 61360-2:2002 BS EN 61360-2:2002, IEC 61360-2:2002. Standard data element types with associated classification scheme for electric components. EXPRESS dictionary schema
BS ISO 17361:2007 BS ISO 17361:2007. Intelligent transport systems. Lane departure warning systems. Performance requirements and test procedures
BS ISO 11464:2006 BS ISO 11464:2006. Soil quality. Pretreatment of samples for physio-chemical analysis
BS ISO 2017-1:2005 BS ISO 2017-1:2005. Mechanical vibration and shock. Resilient mounting systems. Technical information to be exchanged for the application of isolation systems
BS EN 60282-1:2002 BS EN 60282-1:2002. High-voltage fuses. Current-limiting fuses
BS ISO 18329:2004 BS ISO 18329:2004. Milk and milk products. Determination of furosine content. Ion-pair reverse-phase high-performance liquid chromatography method
BS EN 13765:2003 BS EN 13765:2003. Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification
BS EN 13766:2003 BS EN 13766:2003. Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification
BS EN ISO 12737:2005 BS EN ISO 12737:2005. Metallic materials. Determination of plane-strain fracture toughness
BS EN 1555-1:2002 BS EN 1555-1:2002. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). General
BS EN 1555-2:2002 BS EN 1555-2:2002. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Pipes
BS EN 1555-4:2002 BS EN 1555-4:2002. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Valves
BS EN 61479:2001, IEC 61479:2001 BS EN 61479:2001, IEC 61479:2001. Live working. Flexible conductor covers (line hoses) of insulating material
BS EN 60191-6-10:2003 BS EN 60191-6-10:2003. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages
BS EN 14619:2005 BS EN 14619:2005. Roller sports equipment. Kick scooters. Safety requirements and test methods
BS EN 50374:2004 BS EN 50374:2004. Conductor cars
ISO/TR10305-2 : 2003 EDTN 1 ISO/TR10305-2 : 2003 EDTN 1. ISO/TR10305-2 : 2003 Road vehicles- Calibration of electromagnetic field strength measuring devices -. Part 2: IEEE standard for calibration of
BS EN 14215:2003 BS EN 14215:2003. Textile floor coverings. Classification of machine-made pile rugs and runners
BS EN ISO 5264-2:2002 BS EN ISO 5264-2:2002. Pulps. Laboratory beating. PFI mill method
BS EN ISO 14915-3:2002 BS EN ISO 14915-3:2002. Software ergonomics for multimedia user interfaces. Media selection and combination
DD CEN/TS 14495:2003 DD CEN/TS 14495:2003. Leather. Chemical tests. Determination of chromium VI content
BS EN 820-2:2003 BS EN 820-2:2003. Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties. Determination of self-loaded deformation
BS ISO 14839-2:2004 BS ISO 14839-2:2004. Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings. Evaluation of vibration
ISO/IECTR18057 : 2004 EDTN1 ISO/IECTR18057 : 2004 EDTN1. ISO/IECTR18057 : 2004 Information Technology - Telecommunications and information exchange between systems - Using ECMA-323 (CSTA XML) in a Voi
03/102517 DC 03/102517 DC. BS EN 13633. Building hardware. Electrically controlled panic exit systems. Requirements and test methods
BS EN 12321:2003 BS EN 12321:2003. Underground mining machinery. Specification for the safety requirements of armoured face conveyors
BS EN ISO 9094-2:2002 BS EN ISO 9094-2:2002. Small craft. Fire protection. Craft with a hull length of over 15 m
DD CEN ISO/TS 17234:2003 DD CEN ISO/TS 17234:2003. Leather. Chemical tests. Determination of certain azo colourants in dyed leathers
ISO10303-42 : 2003 EDTN 3 ISO10303-42 : 2003 EDTN 3. ISO10303-42 : 2003 Industrial automation systems and integration- Product data representation and exchange- . Part 42: Integrated generic resource:
BS EN ISO 16426:2002 BS EN ISO 16426:2002. Fasteners. Quality assurance system
BS EN ISO 8325:2004 BS EN ISO 8325:2004. Dentistry. Test methods for rotary instruments
DD CEN ISO/TS 17226:2003 DD CEN ISO/TS 17226:2003. Leather. Chemical tests. Determination of formaldehyde content
BS 8502:2003 BS 8502:2003. Graphical symbols and signs. Creation and design of public information symbols. Requirements
BS ISO 23079:2005 BS ISO 23079:2005. Magnesium and magnesium alloys. Returns. Requirements, classification and acceptance
BS EN ISO 12777-3:2002 BS EN ISO 12777-3:2002. Methods of test for pallet joints. Determination of strength of pallet joints
BS EN 60076-5:2006 BS EN 60076-5:2006. Power transformers. Ability to withstand short-circuit
BS ISO 15988:2003 BS ISO 15988:2003. Plastics. Film and sheeting. Biaxially oriented poly(ethylene terephthalate) (PET) films
BS EN ISO 4527:2003 BS EN ISO 4527:2003. Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods
BS EN ISO 75-1:2004 BS EN ISO 75-1:2004. Plastics. Determination of temperature of deflection under load. General test method
BS ISO 6296:2000, BS 2000-439:2001 BS ISO 6296:2000, BS 2000-439:2001. Methods of test for petroleum and its products. Petroleum product. Determination of water. Potentiometric Karl Fischer titration
BS EN 62008:2005 BS EN 62008:2005. Performance characteristics and caliberation for digital data acquisition systems and relevant software
BS EN 61188-5-1:2002 BS EN 61188-5-1:2002. Printed boards and assemblies. Design and use. Attachment (land/joint) considerations. Attachment (land/joint) considerations. Generic requirements
BS ISO 4138:2004 BS ISO 4138:2004. Passenger cars. Steady-state circular driving behaviour. Open-loop test methods
BS EN 61337-1:2004 BS EN 61337-1:2004. Filters using waveguide type dielectric resonators. Generic specification
BS EN 61338-1:2005 BS EN 61338-1:2005. Waveguide type dielectric resonators. Generic specification
BS EN ISO 3882:2003 BS EN ISO 3882:2003. Metallic and other inorganic coatings. Review of methods of measurement of thickness
BS ISO 2108:2005 BS ISO 2108:2005. Information and documentation. International standard book number (ISBN)
BS 8500-1:2002 BS 8500-1:2002. Concrete. Complementary British Standard to BS EN 206-1. Method of specifying and guidance for the specifier
BS 8500-2:2002 BS 8500-2:2002. Concrete. Complementary British Standard to BS EN 206-1. Specification for constituent materials and concrete
BS ISO 21869:2006 BS ISO 21869:2006. Rubber compounding ingredients. Magnesium oxide. Methods of test
BS ISO 21870:2005 BS ISO 21870:2005. Rubber compounding ingredients. Carbon black. Determination of high-temperature loss on heating by thermogravimetry
BS EN ISO 15493:2003 BS EN ISO 15493:2003. Plastics piping systems for industrial applications. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly (vinyl chloride) (PVC-U) and chlorinated poly
BS EN ISO 15494:2003 BS EN ISO 15494:2003. Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE) and polypropylene (PP). Specifications for components and the system.
ISO/TR17400 : 2003 EDTN 1 ISO/TR17400 : 2003 EDTN 1. ISO/TR17400 : 2003 Space systems- Space launchcomplexes,integration sites and other facilities- General testing guidelines
BS EN 13598-1:2003 BS EN 13598-1:2003. Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE).
BS EN 60335-2-76:2005 BS EN 60335-2-76:2005. Household and similar electrical appliances. Safety. Particular requirements for electric fence energizers
BS EN 60335-2-86:2003 BS EN 60335-2-86:2003. Specification for safety of household and similar electrical appliances. Particular requirements for electric fishing machines
ISO/IEC14882 : 2003 EDTN 2 ISO/IEC14882 : 2003 EDTN 2. ISO/IEC14882 : 2003 Space systems - Space launch complexes, integration sites and other facilities - General testing guidelines
BS EN ISO 16663-1:2003 BS EN ISO 16663-1:2003. Fishing nets. Method of test for the determination of mesh size. Opening of mesh
BS ISO 14695:2003, BS 848-6:2003 BS ISO 14695:2003, BS 848-6:2003. Fans for general purposes. Method of measurement of fan vibration
BS ISO/IEC 1989:2002 BS ISO/IEC 1989:2002. Information technology. Programming languages. COBOL
BSISO/IEC1989 : 2002 (CD-ROM) BSISO/IEC1989 : 2002 (CD-ROM).
BS EN 61061-1:2006 BS EN 61061-1:2006. Non-impregnated densified laminated wood for electrical purposes. Definitions, designation and general requirements
BS EN 62329-2:2006 BS EN 62329-2:2006. Heat shrinkable moulded shapes . Methods of test
BS EN 1273:2005 BS EN 1273:2005. Child use and care articles. Baby walking frames. Safety requirements and test methods
BS EN 60942:2003 BS EN 60942:2003. Electroacoustics. Sound calibrators
BS EN 13612:2002 BS EN 13612:2002. Performance evaluation of in vitro diagnostic medical devices
BS ISO 2836:1999 BS ISO 2836:1999. Graphic technology. Prints and printing inks. Assessment of resistance to various agents
BS ISO 2834:1999 BS ISO 2834:1999. Graphic technology. Test print preparation for offset and letterpress inks
BS EN 13336:2004 BS EN 13336:2004. Leather. Upholstery leather characteristics. Guide for selection of leather for furniture
BS EN 13843:2003 BS EN 13843:2003. Roller sports equipment. Inline-skates. Safety requirements and test methods
BS EN 13277-6:2003 BS EN 13277-6:2003. Protective equipment for martial arts. Additional requirements and test methods for breast protectors for females
BS ISO 15713:2006 BS ISO 15713:2006. Stationary source emissions. Sampling and determination of gaseous fluoride content
BS ISO 16121-1:2005 BS ISO 16121-1:2005. Road vehicles. Ergonomic requirements for the driver's workplace in line-service buses. General description, basic requirements
BS ISO 16121-2:2005 BS ISO 16121-2:2005. Road vehicles. Ergonomic requirements for the driver's workplace in line-service buses. Visbility
BS ISO 16121-3:2005 BS ISO 16121-3:2005. Road vehicles. Ergonomic requirements for the driver's workplace in line-service buses. Information devices and controls
BS ISO 16121-4:2005 BS ISO 16121-4:2005. Road vehicles. Ergonomic requirements for the driver's workplace in line-service buses. Cabin environment
PD ISO/IEC TR 19791:2006 PD ISO/IEC TR 19791:2006. Information technology. Security techniques. Security assessment of operational systems
03/102518 DC 03/102518 DC. BS EN 13637. Building hardware. Electrically controlled emergency exit systems for use on escape routes. Requirements and test methods
CWA 14659:2003 CWA 14659:2003. Traceability of fishery products. Specification of the information to be recorded in farmed fish distribution chains
CWA 14660:2003 CWA 14660:2003. Traceability of fishery products. Specification on the information to be recorded in captured fish distribution chains
CWA 14661:2003 CWA 14661:2003. Guidelines to standardisers of ICT products and services in the CEN ICT domain
BS EN ISO 14509-2:2006 BS EN ISO 14509-2:2006. Small craft. Airborne sound emitted by powered recreational craft. Sound assessment using reference craft
BS EN 14622:2005 BS EN 14622:2005. Devices to prevent pollution by backflow of potable water. Air gap with circular overflow (restricted). Family A, type F
BS EN 14623:2005 BS EN 14623:2005. Devices to prevent pollution by backflow of potable water. Air gaps with minimum circular overflow (verified by test or measurement). Family A, type G
BS EN 13790-1:2003 BS EN 13790-1:2003. Agricultural machinery. Sprayers. Inspection of sprayers in use. Field crop sprayers
BS EN 61192-3:2003 BS EN 61192-3:2003. Workmanship requirements for soldered electronic assemblies. Through-hole mount assemblies
BS ISO 8640-1:2004 BS ISO 8640-1:2004. Textile machinery and accessories. Flat warp knitting machines. Vocabulary of basic structure and knitting elements
BS ISO 8640-2:2004 BS ISO 8640-2:2004. Textile machinery and accessories. Flat warp knitting machines. Vocabulary of warp let-off, fabric take-up and batching
BS EN ISO 10821:2005 BS EN ISO 10821:2005. Industrial sewing machines. Safety requirements for sewing machines, units and systems
BS EN ISO 11111-1:2005 BS EN ISO 11111-1:2005. Textile machinery. Safety requirements. Common requirements
BS EN ISO 11111-2:2005 BS EN ISO 11111-2:2005. Textile machinery. Safety requirements. Spinning preparatory and spinning machines
BS EN ISO 11111-3:2005 BS EN ISO 11111-3:2005. Textile machinery. Safety requirements. Nonwoven machinery
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
