BIS Standards Catalogue
BS EN ISO 11111-4:2005 BS EN ISO 11111-4:2005. Textile machinery. Safety requirements. Yarn processing, cordage and rope manufacturing machinery
BS EN ISO 11111-5:2005 BS EN ISO 11111-5:2005. Textile machinery. Safety requirements. Preparatory machinery to weaving and knitting
BS EN ISO 11111-6:2005 BS EN ISO 11111-6:2005. Textile machinery. Safety requirements. Fabric manufacturing machinery
BS EN ISO 11111-7:2005 BS EN ISO 11111-7:2005. Textile machinery. Safety requirements. Dyeing and finishing machinery
BS EN 60191-6-2:2002, IEC 60191-6-2:2001 BS EN 60191-6-2:2002, IEC 60191-6-2:2001. Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface
BS EN 13855-1:2003 BS EN 13855-1:2003. Manufactured articles solely filled with feathers and down. Measurement of thickness and compressibility of cushions. Test method by rotation
BS EN 13855-2:2003 BS EN 13855-2:2003. Manufactured articles solely filled with feathers and down. Measurement of thickness and compressibility of cushions. Test method by oscillation
BS EN ISO 3251:2003, BS 3900-B18:2003 BS EN ISO 3251:2003, BS 3900-B18:2003. Paints, varnishes and plastics. Determination of non-volatile-matter content
BS EN 61188-5-6:2003 BS EN 61188-5-6:2003. Printed boards and assemblies. Design and use. Attachment (land/joint) considerations. Chip carriers with J-leads on four sides
BS EN 61192-4:2003 BS EN 61192-4:2003. Workmanship requirements for soldered electronic assemblies. Terminal assemblies
BS EN 13854:2003 BS EN 13854:2003. Manufactured articles solely filled with feather and down. Requirements for upholstered parts and cushions
BS EN 1765:2004 BS EN 1765:2004. Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
BS EN 61850-10:2005 BS EN 61850-10:2005. Communication networks and systems in substations. Conformance testing
BS EN 61968-3:2004 BS EN 61968-3:2004. Application integration at electric utilities. System interfaces for distribution management. Interface for network operations
BS EN 60726:2003 BS EN 60726:2003. Dry-type power transformers
BS EN 61800-5-1:2003 BS EN 61800-5-1:2003. Adjustable speed electrical power drive systems. Safety requirements. Electrical, thermal and energy
BS EN 10266:2003 BS EN 10266:2003. Steel tubes, fittings and structural hollow sections. Symbols and definitions of terms for use in product standards
BS 7540-2:2005 BS 7540-2:2005. Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. Harmonized cable types from HD 21 and HD 22
BS 7540-3:2005 BS 7540-3:2005. Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. National standard cables not included in HD 21 and HD 22
WD/ISO/IEC17341 : 2005 EDTN2 WD/ISO/IEC17341 : 2005 EDTN2. ISO/IEC17341 : 2005 Information technology -- Data interchange on 120 mm and 80 mm optical disk using +RW format -- Capacity: 4,7 Gbytes and
BS EN 511:2006 BS EN 511:2006. Protective gloves against cold
BS EN 12810-1:2003 BS EN 12810-1:2003. Facade scaffolds made of prefabricated components. Product specifications
BS ISO 15740:2005 BS ISO 15740:2005. Photography. Electronic still picture imaging. Picture transfer protocol (PTP) for digital still photography devices
BS EN ISO 14971:2007 BS EN ISO 14971:2007. Medical devices. Application of risk management to medical devices
BS EN ISO 7389:2003 BS EN ISO 7389:2003. Building construction. Jointing products. Determination of elastic recovery of sealants
BS EN ISO 7390:2003 BS EN ISO 7390:2003. Building construction. Jointing products. Determination of resistance to flow of sealants
PD 7974-4:2003 PD 7974-4:2003. Application of fire safety engineering principles to the design of buildings. Detection of fire and activation of fire protection systems. (Sub-system 4)
BS EN ISO 8130-14:2004, BS 3900-J14:2004 BS EN ISO 8130-14:2004, BS 3900-J14:2004. Coating powders. Terminology
BS EN 13022-1:2006 BS EN 13022-1:2006. Glass in building. Structural sealant glazing. Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazin
BS 7969:2004 BS 7969:2004. Adhesives. Ethyl and methyl cyanoacrylate types 1,2 and 3
03/102124 DC 03/102124 DC. EN 14636-1. Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC). Part 1: Pipes and fittings with flexible joints
BS EN 13022-2:2006 BS EN 13022-2:2006. Glass in building. Structural sealant glazing. Assembly rules
BS EN 81-28:2003 BS EN 81-28:2003. Safety rules for the construction and installation of lifts. Remote alarm on passenger and goods passenger lifts
BS EN 15434:2006 BS EN 15434:2006. Glass in building. Product standard for structural and/or ultraviolet resistant sealant (for use with structural sealant glazing and/or insulating glass units with e
BS EN 14629:2007 BS EN 14629:2007. Products and systems for the protection and repair of concrete structures. Test methods. Determination of chloride content in hardened concrete
BS EN 14630:2006 BS EN 14630:2006. Products and systems for the protection and repair of concrete structures. Test methods. Determination of carbonation depth in hardened concrete by the phenolphthale
BS EN 60335-2-75:2002 BS EN 60335-2-75:2002. Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for commercial dispensing applian
BS ISO 18172-1:2007 BS ISO 18172-1:2007. Gas cylinders. Refillable welded stainless steel cylinders. Test pressure 6 MPa and below
BS 2471:2005 BS 2471:2005. Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area
BS EN 13023:2003 BS EN 13023:2003. Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment. Accuracy grades 2 and 3
BS 4060:2006 BS 4060:2006. Pressed wool felts. Specification
BS 6810-2:2005 BS 6810-2:2005. Determination of metals in textiles. Analysis by atomic emission spectroscopy
BS EN ISO 1969:2004 BS EN ISO 1969:2004. Fibre ropes. Polyethylene. 3- and 4-strand ropes
BS 4248:2004 BS 4248:2004. Supersulfated cement
BS EN 14772:2005 BS EN 14772:2005. Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
BS ISO 11104:2003 BS ISO 11104:2003. Space data and information transfer systems. Time code formats
DD ISO/TS 13474:2003 DD ISO/TS 13474:2003. Acoustics. Impulse sound propagation for environmental noise assessment
DD ISO/TS 15666:2003 DD ISO/TS 15666:2003. Acoustics. Assessment of noise annoyance by means of social and socio-acoustic surveys
BS EN 60071-1:2006 BS EN 60071-1:2006. Insulation co-ordination. Definitions, principles and rules
ISO15442 : 2005 EDTN1 ISO15442 : 2005 EDTN1. ISO15442 : 2005 Cranes. Safety requirements for loader cranes
BS EN ISO 14577-4:2007 BS EN ISO 14577-4:2007. Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS EN ISO/IEC 17024:2003 BS EN ISO/IEC 17024:2003. Conformity Assessment. General requirements for bodies operating certification of persons
BS EN ISO 483:2005 BS EN ISO 483:2005. Plastics. Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at constant value
CWA 14708:2003 CWA 14708:2003. The practical use of electronic signatures in e-commerce: a guide for SMEs
CWA 14698-1:2003 CWA 14698-1:2003. Principles to create a standardized framework for the classification of non-food products
CWA 14698-2:2003 CWA 14698-2:2003. Conceptual description of basic elements to support the classification product description
BS EN 14640:2005 BS EN 14640:2005. Welding consumables. Solid wires and rods for fusion welding of copper and copper alloys. Classification
BS EN 13938-3:2003 BS EN 13938-3:2003. Explosives for civil uses. Propellants and rocket propellants. Determination of deflagration to detonation transition
BS EN ISO 1805:2006 BS EN ISO 1805:2006. Fishing nets. Determination of breaking force and knot breaking force of netting yarns
BS EN ISO 4167:2006 BS EN ISO 4167:2006. Polyolefin agricultural twines
BS EN 14573:2004 BS EN 14573:2004. Foodstuffs. Determination of 3-monochloropropane-1,2-diol by GC/MS
BS EN 1010-3:2002 BS EN 1010-3:2002. Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Cutting machines
BS EN 50289-4-12:2004 BS EN 50289-4-12:2004. Communication cables. Specifications for test methods. Environmental test methods. Vertical flame spread test on bunched small communication cables
BS EN 60917-2-3:2006 BS EN 60917-2-3:2006. Modular order for the development of mechanical structures for electronic equipment practices. Sectional specification. Interface co-ordination dimensions fo
BS EN 50406-1:2004 BS EN 50406-1:2004. End user multi-pair cables used in high bit rate telecommunication networks. Aerial cables
BS EN 50406-2:2004 BS EN 50406-2:2004. End user multi-pair cables used in high bit rate telecommunication networks. Duct and buried cables
BS EN 50407-1:2004 BS EN 50407-1:2004. Multi-pair cables used in high bit rate digital access telecommunication networks. Outdoor cables
BS EN ISO 8033:2006 BS EN ISO 8033:2006. Rubber and plastics hoses. Determination of adhesion between components
BS ISO 17373:2005 BS ISO 17373:2005. Road vehicles. Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact
BS ISO 3046-3:2006 BS ISO 3046-3:2006. Reciprocating internal combustion engines. Performance. Test measurements
BS EN 62252:2004 BS EN 62252:2004. Maritime navigation and radiocommunication equipment and systems. Radar for craft not in compliance with IMO SOLAS Chapter V. Performance requirements methods of tes
BS ISO 16152:2005 BS ISO 16152:2005. Plastics. Determination of xylene-soluble matter in polypropylene
ISO/IEC14496-5 AMD5(11/04)CD-ROM ISO/IEC14496-5 AMD5(11/04)CD-ROM. ISO/IEC14496-5 : 2001 Information technology - Coding of audio-visual objects -. Part 5: Reference software
BS ISO 6415:2005 BS ISO 6415:2005. Internal combustion engines. Spin-on filters for lubricating oil. Dimensions
BS EN ISO 1874-2:2006 BS EN ISO 1874-2:2006. Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS ISO 22498:2005 BS ISO 22498:2005. Plastics. Vinyl chloride homopolymer and copolymer resins. Particle size determination by mechanical sieving
BS EN 14180:2003 BS EN 14180:2003. Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing
BS EN ISO 13000-1:2005 BS EN ISO 13000-1:2005. Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Requirements and designation
BS EN ISO 13000-2:2005 BS EN ISO 13000-2:2005. Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Preparation of test specimens and determination of properties
BS ISO 13555-1:2003 BS ISO 13555-1:2003. Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment. Preconditioning
BS ISO 13555-2:2003 BS ISO 13555-2:2003. Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment. Test method
PAS 62:2003 PAS 62:2003. Refrigerated transport. Procedure for determining performance and calculating energy efficiency
BS EN 50307:2002 BS EN 50307:2002. Lead and lead alloys. Lead and lead alloy sheaths and sleeves of electric cables
BS ISO 9912-1:2004 BS ISO 9912-1:2004. Agricultural irrigation equipment. Filters for micro-irrigation. Terms, definitions and classification
ISO/IEC17594 : 2004 EDTN1 ISO/IEC17594 : 2004 EDTN1. ISO/IEC17594 : 2004 Information technology -- Cases for 120 mm and 80 mm DVD-RAM disks
ISO/IEC17592 : 2004 EDTN1 ISO/IEC17592 : 2004 EDTN1. ISO/IEC17592 : 2004 Information technology -- 120 mm (4,7 Gbytes per side) and 80 mm (1,46 Gbytes per side) DVD rewritable disk (DVD-RAM)
BS EN 61935-1:2001, IEC 61935-1:2000 BS EN 61935-1:2001, IEC 61935-1:2000. Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173. Install
ISO/IEC17342 : 2004 EDTN1 ISO/IEC17342 : 2004 EDTN1. ISO/IEC17342 : 2004 Information technology -- 80 mm (1,46 Gbytes per side)and 120 mm (4,70 Gbytes per side) DVD re-recordable disk (DVD-RW)
BS EN 61094-6:2005 BS EN 61094-6:2005. Measurement microphones. Electrostatic actuators for determination of frequency response
BS ISO 16412:2005 BS ISO 16412:2005. Air cargo equipment. Air cargo pallets. Utilization guidelines
BS ISO 5287:2003 BS ISO 5287:2003. Belt drives. Narrow V-belts for the automotive industry. Fatigue test
BS EN ISO 19952:2006 BS EN ISO 19952:2006. Footwear. Vocabulary
BS EN ISO 8502-2:2005 BS EN ISO 8502-2:2005. Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Laboratory determinatio
BS EN 205:2003 BS EN 205:2003. Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints
ISO/IEC15938-9 : 2005 EDTN1 ISO/IEC15938-9 : 2005 EDTN1. ISO/IEC15938-9 : 2005 Information technology - Multimedia content description interface . Part 9 : Profiles and Levels
BS EN ISO 13691:2002 BS EN ISO 13691:2002. Petroleum and natural gas industries. High-speed special-purpose gear units
BS EN ISO 3977-5:2003 BS EN ISO 3977-5:2003. Gas turbines. Procurement. Applications for petroleum and natural gas industries
BS EN 88528-11:2004 BS EN 88528-11:2004. Reciprocating internal combustion engine driven alternating current generating sets. Rotary uninterruptible power systems. Performance requirements and test me
DD CLC/TS 62367:2005 DD CLC/TS 62367:2005. Safety aspects for xDSL signals on circuits connected to telecommunication networks (DSL: digital subscriber line)
BS EN 14620-4:2006 BS EN 14620-4:2006. Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatur
ISO4144 : 2003 (R08) EDTN 2 ISO4144 : 2003 (R08) EDTN 2. ISO4144 : 2003 Pipework- Stainless steel fittings threaded in accordance with ISO 7-1
BS ISO 11648-1:2003 BS ISO 11648-1:2003. Statistical aspects of sampling from bulk materials. General principles
BS EN 14045:2003 BS EN 14045:2003. Packaging. Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions
06/30092082 DC 06/30092082 DC. ISO 16293-1. Glass in building. Basic soda lime silicated glass products. Part 1. Definitions and general physical and mechanical properties
BS EN 14046:2003 BS EN 14046:2003. Packaging. Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions. Method by analysis o
04/30092090 DC 04/30092090 DC. ISO 20039. Acoustical test methods and sound power equipment rating procedure for transportation refrigeration equipment
BS EN 60603-7-7:2006 BS EN 60603-7-7:2006. Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz
BS EN 13698-2:2003 BS EN 13698-2:2003. Pallet production specification. Construction specification for 1000 mm x 1200 mm flat wooden pallets
BS EN 60384-9-1:2005 BS EN 60384-9-1:2005. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors of ceramic dielectric, Class 2. Assessment level EZ
BS EN 60384-8:2005 BS EN 60384-8:2005. Fixed capacitors for use in electronic equipment. Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
BS EN 60384-9:2005 BS EN 60384-9:2005. Fixed capacitors for use in electronic equipment. Sectional specification: fixed capacitors of ceramic dielectric, class 2
BS EN 60384-8-1:2005 BS EN 60384-8-1:2005. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors of ceramic dielectric, class 1. Assessment level EZ
PD IEC/TR 60479-4:2004 PD IEC/TR 60479-4:2004. Effects of current on human beings and livestock. Effects of lightning strokes on human beings and livestock
BS ISO 14243-3:2004 BS ISO 14243-3:2004. Implants for surgery. Wear of total knee-joint prostheses. Loading and displacement parameters for wear-testing machines with displacement control and correspo
BSISO12640-2 : 2004 BSISO12640-2 : 2004 . BSISO12640-2 : 2004 Graphic technology . Prepress digital data exchange . . Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID)
ISO/IEC14496-5 AMD4(08/04)CD-ROM ISO/IEC14496-5 AMD4(08/04)CD-ROM. ISO/IEC14496-5 : 2001 Information technology - Coding of audio-visual objects - . Part 5 : Reference software
BS ISO 21188:2006 BS ISO 21188:2006. Public key infrastructure for financial services. Practices and policy framework
BS ISO 8296:2003 BS ISO 8296:2003. Plastics. Film and sheeting. Determination of wetting tension
BS ISO 7401:2003 BS ISO 7401:2003. Road vehicles. Lateral transient response test methods. Open-loop test methods
BS EN 13481-8:2006 BS EN 13481-8:2006. Railway applications. Track. Performance requirements for fastening systems. Fastening systems for track with heavy axle loads
BS ISO 8573-7:2003 BS ISO 8573-7:2003. Compressed air. Test method for viable microbiological contaminant content
BS EN ISO 8996:2004 BS EN ISO 8996:2004. Ergonomics of the thermal environment. Determination of metabolic rate
BS EN ISO 15927-1:2003 BS EN ISO 15927-1:2003. Hygrothermal performance of buildings. Calculation and presentation of climatic data. Monthly means of single meteorological elements
BS EN ISO 14577-1:2002 BS EN ISO 14577-1:2002. Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS EN ISO 14577-2:2002 BS EN ISO 14577-2:2002. Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
BS EN ISO 14577-3:2002 BS EN ISO 14577-3:2002. Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BIP 3001:2003 BIP 3001:2003. CE marking of insulating glass units. Manufacturer's toolkit
BS EN ISO 8224-1:2003 BS EN ISO 8224-1:2003. Traveller irrigation machines. Operational characteristics and laboratory and field test methods
BIP 2013:2003 BIP 2013:2003. Understanding ISO 9001:2000 and Process-based Management Systems
BIP 2014:2003 BIP 2014:2003. Creating a Process-based Management System for IS0 9001:2000 and Business Improvement
BIP 2015:2003 BIP 2015:2003. Process Management Auditing for ISO 9001:2000
BS ISO 22917:2004 BS ISO 22917:2004. Superabrasives. Limit deviations and run out tolerances for grinding wheels with diamond or cubic boron nitride
BS ISO 6106:2005 BS ISO 6106:2005. Abrasive products. Checking the grit size of superabrasives
BS ISO 14416:2003 BS ISO 14416:2003. Information and documentation. Requirements for binding of books, periodicals, serials and other paper documents for archive and library use. Methods and materials
BS ISO 17733:2004 BS ISO 17733:2004. Workplace air. Determination of mercury and inorganic mercury compounds. Method by cold vapour atomic absorption spectrometry or atomic fluorescence spectrometry
BS ISO 9136-1:2004 BS ISO 9136-1:2004. Abrasive grains. Determination of bulk density. Macrogrits
BS EN 1094-3:2003 BS EN 1094-3:2003. Insulating refractory products. Classification of insulating products made from ceramic fibres
BS ISO 15864:2004 BS ISO 15864:2004. Space systems. General test methods for space craft, subsystems and units
BS ISO 22669:2003 BS ISO 22669:2003. Space data and information transfer systems. Space link extension (SLE). Return-all-frames service
BS ISO 3919:2005 BS ISO 3919:2005. Coated abrasives. Flap wheels with shaft
BS EN 14649:2005 BS EN 14649:2005. Precast concrete products. Test method for strength retention of glass fibres in cement and concrete (SIC test)
BS EN 14650:2005 BS EN 14650:2005. Precast concrete products. General rules for factory production control of metallic fibered concrete
BS EN ISO 7539-6:2003 BS EN ISO 7539-6:2003. Corrosion of metals and alloys. Stress corrosion testing. Preparation and use of pre-cracked specimens for tests under constant load or constant displaceme
BS EN ISO 2789:2003 BS EN ISO 2789:2003. Information and documentation. International library statistics
BS ISO 5429:2005 BS ISO 5429:2005. Coated abrasives. Flap wheels with incorporated flanges or separate flanges
BS ISO 2976:2005 BS ISO 2976:2005. Coated abrasives. Abrasive belts. Selection of width/length combinations
BS EN ISO 7823-3:2004 BS EN ISO 7823-3:2004. Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics. Continuous cast sheets
BS ISO 15105-2:2003 BS ISO 15105-2:2003. Plastics. Film and sheeting. Determination of gas-transmission rate. Equal-pressure method
PD 6678:2005 PD 6678:2005. Guide to the specification of masonry mortar
BS EN 14639:2005 BS EN 14639:2005. Crude tar and crude benzole. Characteristics and test methods
BS ISO 13894-2:2005 BS ISO 13894-2:2005. High-pressure decorative laminates. Composite elements. Specifications for composite elements with wood-based substrates for interior use
BS ISO 21368:2005 BS ISO 21368:2005. Adhesives. Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures
BS EN 62271-108:2006 BS EN 62271-108:2006. High-voltage switchgear and controlgear. High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above
BS EN 62271-3:2006 BS EN 62271-3:2006. High-voltage switchgear and controlgear. Digital interfaces based on IEC 61850
BS EN 14653-1:2005 BS EN 14653-1:2005. Manually operated hydraulic shoring systems for groundwork support. Product specifications
BS EN 14653-2:2005 BS EN 14653-2:2005. Manually operated hydraulic shoring systems for groundwork support. Assessment by calculation or test
BS EN ISO 10846-3:2002 BS EN ISO 10846-3:2002. Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Indirect method for determination of the dyn
BS EN ISO 2039-1:2003 BS EN ISO 2039-1:2003. Plastics. Determination of hardness. Ball indentation method
BS EN 61921:2003 BS EN 61921:2003. Power capacitors. Low-voltage power factor correction banks
BS ISO 18437-2:2005 BS ISO 18437-2:2005. Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Resonance method
BS ISO 6673:2003 BS ISO 6673:2003. Green coffee. Determination of loss in mass at 105°C
BS EN 14036:2003 BS EN 14036:2003. Child use and care articles. Baby bouncers. Safety requirements and test methods
BS EN 10107:2005 BS EN 10107:2005. Grain-oriented electrical steel sheet and strip delivered in the fully processed state
BS 4987-1:2003 BS 4987-1:2003. Coated macadam (asphalt concrete) for roads and other paved areas. Specification for constituent materials and for mixtures
BS 594-1:2003 BS 594-1:2003. Hot rolled asphalt for roads and other paved areas. Specification for constituent materials and asphalt mixtures
CWA 13937-1:2003 CWA 13937-1:2003. J/extensions for financial service (J/XFS) for the Java platform. Base architecture. Programmer's reference
CWA 13937-2:2003 CWA 13937-2:2003. J/extensions for financial service (J/XFS) for the Java platform. Pin keypad device class interface. Programmer's reference
CWA 13937-3:2003 CWA 13937-3:2003. J/extensions for financial service (J/XFS) for the Java platform. Magnetic stripe & chip card device class interface. Programmer's reference
CWA 13937-4:2003 CWA 13937-4:2003. J/extensions for financial service (J/XFS) for the Java platform. Text input/output device interface. Programmer's reference
CWA 13937-5:2003 CWA 13937-5:2003. J/extensions for financial service (J/XFS) for the Java platform. Cash dispenser, recycler and ATM device class interface. Programmer's reference
BS 7967-1:2005 BS 7967-1:2005. Carbon monoxide in dwellings and the combustion performance of gas-fired appliances. Guide for identifying and managing sources of fumes, smells, spillage/leakage of com
CWA 13937-6:2003 CWA 13937-6:2003. J/extensions for financial service (J/XFS) for the Java platform. Printer device class interface. Programmer's reference
CWA 13937-7:2003 CWA 13937-7:2003. J/extensions for financial service (J/XFS) for the Java platform. Alarm device interface. Programmer's reference
CWA 13937-8:2003 CWA 13937-8:2003. J/extensions for financial service (J/XFS) for the Java platform. Sensors and indicators unit device class interface. Programmer's reference
BS 7967-2:2005 BS 7967-2:2005. Carbon monoxide in dwellings and the combustion performance of gas-fired appliances. Guide for using electronic portable combustion gas analysers in the measurement of c
CWA 13937-9:2003 CWA 13937-9:2003. J/extensions for financial service (J/XFS) for the Java platform. Depository device class interface. Programmer's reference
CWA 13937-10:2003 CWA 13937-10:2003. J/extensions for financial service (J/XFS) for the Java platform. Check reader/scanner device class interface. Programmer's reference
BS 7967-3:2005 BS 7967-3:2005. Carbon monoxide in dwellings and the combustion performance of gas-fired appliances. Guide for responding to measurements obtained from electronic portable combustion ga
CWA 13937-11:2003 CWA 13937-11:2003. J/extensions for financial service (J/XFS) for the Java platform. Camera specification. Programmer's reference
CWA 13937-12:2003 CWA 13937-12:2003. J/extensions for financial service (J/XFS) for the Java platform. Vendor dependant mode specification. Programmer's reference
BS EN 13631-13:2003 BS EN 13631-13:2003. Explosives for civil uses. High explosives. Determination of density
BS EN 13631-14:2003 BS EN 13631-14:2003. Explosives for civil uses. High explosives. Determination of velocity of detonation
BS ISO 18437-3:2005 BS ISO 18437-3:2005. Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Cantilever shear beam method
BS ISO 20806:2004 BS ISO 20806:2004. Mechanical vibration. Criteria and safeguards for the in-situ balancing of medium and large rotors
BS EN 13310:2003 BS EN 13310:2003. Kitchen sinks. Functional requirements and test methods
BS ISO 4733:2004 BS ISO 4733:2004. Oil of cardamom [Elettaria cardamomum (L.) Maton]
BS EN ISO 10077-2:2003 BS EN ISO 10077-2:2003. Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. Numerical method for frames
BS EN ISO 15083:2003 BS EN ISO 15083:2003. Small craft. Bilge-pumping systems
BS EN ISO 11816-2:2003 BS EN ISO 11816-2:2003. Milk and milk products. Determination of alkaline phosphatase activity using a fluorimetric method. Fluorometric method for cheese
BS ISO 16014-3:2003 BS ISO 16014-3:2003. Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
BS ISO 16155:2006 BS ISO 16155:2006. Ships and marine technology. Computer applications. Shipboard loading instruments
BS ISO 11345:2006 BS ISO 11345:2006. Rubber. Assessment of carbon black and carbon black/silica dispersion. Rapid comparative methods
BS EN 1544:2006 BS EN 1544:2006. Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep under sustained tensile load for synthetic resin produc
BS ISO 19860:2005 BS ISO 19860:2005. Gas turbines. Data acquisition and trend monitoring system requirements for gas turbine installations
BS EN 1067:2005 BS EN 1067:2005. Adhesives. Examination and preparation of samples for testing
BS EN 13198:2003 BS EN 13198:2003. Precast concrete products. Street furniture and garden products
BS EN ISO 10380:2003 BS EN ISO 10380:2003. Pipework. Corrugated metal hoses and hose assemblies
BS ISO 14793:2003 BS ISO 14793:2003. Road vehicles. Heavy commercial vehicles and buses. Lateral transient response test methods
BS EN 60974-3:2003 BS EN 60974-3:2003. Arc welding equipment. Arc striking and stabilizing devices
BS EN ISO 19901-2:2004 BS EN ISO 19901-2:2004. Petroleum and natural gas industries. Specific requirements for offshore structures. Seismic design procedures and criteria
ISO11343 : 2003 EDTN 2 ISO11343 : 2003 EDTN 2. ISO11343 : 2003 Adhesives- Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions- Wedge impact method
BS EN 10247:2007 BS EN 10247:2007. Micrographic examination of the non-metallic inclusion content of steels using standard pictures
BS EN 14606:2004 BS EN 14606:2004. Inland navigation vessels. Studless anchor chain. Accessories
BS ISO 7967-5:2003 BS ISO 7967-5:2003. Reciprocating internal combustion engines. Vocabulary of components and systems. Cooling systems
BS EN 13560:2001 BS EN 13560:2001. Surface active agents. Determination of amide nitrogen content. Potentiometric titration
DD CEN/TS 14425-5:2004 DD CEN/TS 14425-5:2004. Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Single-edge vee-notch beam (SEVNB) method
BS EN 1999-1-4:2007 BS EN 1999-1-4:2007. Eurocode 9. Design of aluminium structures. Cold-formed structural sheeting
BS EN 1999-1-5:2007 BS EN 1999-1-5:2007. Design of aluminium structures. Shell structures
BS ISO 10005:2005 BS ISO 10005:2005. Quality management systems. Guidelines for quality plans
PD CEN/TR 14823:2003 PD CEN/TR 14823:2003. Durability of wood and wood-based products. Quantitative determination of pentachlorophenol in wood. Gas chromatographic method
BS EN 1991-1-6:2005 BS EN 1991-1-6:2005. Eurocode 1. Actions on structures. General actions. Actions during execution
BS EN ISO 19901-1:2005 BS EN ISO 19901-1:2005. Petroleum and natural gas industries. Specific requirements for offshore structures. Metocean design and operating considerations
BS ISO 5007:2003 BS ISO 5007:2003. Agricultural wheeled tractors. Operator's seat. Laboratory measurement of transmitted vibration
05/30093062 DC 05/30093062 DC. prEN 15269-2. Extended application of test results for doorsets and shutter assemblies. For doors and shutters. Part 2. Steel hinged and pivoted doorsets
BS ISO 15142-1:2003 BS ISO 15142-1:2003. Implants for surgery. Metal intramedullary nailing systems. Intramedullary nails
BS ISO 15142-2:2003 BS ISO 15142-2:2003. Implants for surgery. Metal intramedullary nailing systems. Locking components
BS ISO 15142-3:2003 BS ISO 15142-3:2003. Implants for surgery. Metal intramedullary nailing systems. Connection devices and reamer diameter measurements
CWA 14711:2003 CWA 14711:2003. Guidance on interim migration from UN/EDIFACT messages to XML solutions
ISO19004 : 2004 EDTN 1 ISO19004 : 2004 EDTN 1. ISO19004 : 2004 Rubber and rubber products . Evaluation of the sensitivity of test methods
BS ISO 2599:2003 BS ISO 2599:2003. Iron ores. Determination of phosphorus content. Titrimetric method
BS EN 14658:2005 BS EN 14658:2005. Continuous handling equipment and systems. General safety requirements for continuous handling equipment for opencast lignite mining
BS ISO 3808:2002 BS ISO 3808:2002. Road vehicles. Unscreened high-voltage ignition cables. General specifications, test methods and requirements
BS EN 12441-7:2004 BS EN 12441-7:2004. Zinc and zinc alloys. Chemical analysis. Determination of tin. Flame atomic absorption spectrometric method after extraction
BS ISO 8178-10:2002 BS ISO 8178-10:2002. Reciprocating internal combustion engines. Exhaust emission measurement. Test cycles and test procedures for field measurement of exhaust gas smoke emissions f
BS EN 12441-9:2004 BS EN 12441-9:2004. Zinc and zinc alloys. Chemical analysis. Determination of nickel in zinc alloys. Flame atomic absorption spectrometric method
BS EN 12441-10:2004 BS EN 12441-10:2004. Zinc and zinc alloys. Chemical analysis. Determination of chromium and titanium in zinc alloys. Spectrophotometric method
BS EN ISO 3815-1:2005 BS EN ISO 3815-1:2005. Zinc and zinc alloys. Analysis of solid samples by optical emission spectrometry
BS EN ISO 3815-2:2005 BS EN ISO 3815-2:2005. Zinc and zinc alloys. Analysis by inductively coupled plasma optical emission spectrometry
BS EN 61162-402:2005 BS EN 61162-402:2005. Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Multiple talkers and multiple listeners. Ship systems interconnections.
03/306584 DC 03/306584 DC. EN 4400-5. Aerospace series. Aluminium and aluminium- and magnesium-alloy products. Technical specification. Part 5: Aluminium and aluminium alloy rivet wire
03/306585 DC 03/306585 DC. EN 4400-7. Aerospace series. Aluminium and aluminium- and magnesium- alloy products. Technical specification. Part 7. Aluminium alloy forgings
BS ISO 16183:2002 BS ISO 16183:2002. Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test con
BS EN 15136:2006 BS EN 15136:2006. Materials and articles in contact with foodstuffs. Certain epoxy derivatives subject to limitation. Determination of BADGE, BFDGE and their hydroxy and chlorinated d
BS EN 15137:2006 BS EN 15137:2006. Materials and articles in contact with foodstuffs. Certain epoxy derivatives subject to limitation. Determination of NOGE and its hydroxy and chlorinated derivatives
BS ISO 5738:2004 BS ISO 5738:2004. Milk and milk products. Determination of copper content. Photometric method. (Reference method)
BS ISO 15648:2004 BS ISO 15648:2004. Butter. Determination of salt content. Potentiometric method
BS EN 14671:2006 BS EN 14671:2006. Characterization of sludges. Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride
BS EN 1143-2:2001 BS EN 1143-2:2001. Secure storage units. Requirements, classification and methods of test for resistance to burglary. Deposit systems
BS EN ISO 11334-1:2007 BS EN ISO 11334-1:2007. Assistive products for walking manipulated by one arm. Requirements and test methods. Elbow crutches
BS EN 14675:2006 BS EN 14675:2006. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the v
BS ISO 16740:2005 BS ISO 16740:2005. Workplace air. Determination of hexavalent chromium in airborne particulate matter. Method by ion chromatography and spectrophotometric measurement using diphenyl
BS EN 14663:2005 BS EN 14663:2005. Foodstuffs. Determination of vitamin B6 (including its glycosylated forms) by HPLC
BS ISO 18669-1:2004 BS ISO 18669-1:2004. Internal combustion engines. Pistons pins. General specifications
BS ISO 18669-2:2004 BS ISO 18669-2:2004. Internal combustion engines. Pistons pins. Inspection measuring principles
BS EN 847-2:2001 BS EN 847-2:2001. Tools for woodworking. Safety requirements. Requirements for the shank of shank-mounted milling tools
BS EN 60404-6:2003 BS EN 60404-6:2003. Magnetic materials. Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200
BS ISO/IEC 9798-6:2005 BS ISO/IEC 9798-6:2005. Information technology. Security techniques. Entity authentication. Mechanisms using manual data transfer
BS EN ISO 18777:2005 BS EN ISO 18777:2005. Transportable liquid oxygen systems for medical use. Particular requirements
BS ISO 10368:2006 BS ISO 10368:2006. Freight thermal containers. Remote condition monitoring
BS EN 284:2006 BS EN 284:2006. Swap bodies. Non-stackable swap bodies of class C. Dimensions and general requirements
BS EN 12641-1:2005 BS EN 12641-1:2005. Swap bodies and commercial vehicles. Tarpaulins. Minimum requirements
BS EN 12641-2:2006 BS EN 12641-2:2006. Swap bodies and commercial vehicles. Tarpaulins. Minimum requirements for curtainsiders
DD CEN/TS 14993:2005 DD CEN/TS 14993:2005. Swap bodies for combined transport. Stackable swap bodies type A 1371.Di mensions, design requirements and testing
BS EN 13042-5:2003 BS EN 13042-5:2003. Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Presses
BS EN ISO 9000:2005 BS EN ISO 9000:2005. Quality management systems. Fundamentals and vocabulary
BS EN 1514-2:2005 BS EN 1514-2:2005. Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Spiral wound gaskets for use with steel flanges
BS 8441-2:2006 BS 8441-2:2006. Health informatics. Medical digital imaging profiles. “M-IHE6-4.8MIS-CT” CT images stored
BS EN 61883-7:2003 BS EN 61883-7:2003. Consumer audio/video equipment. Digital interface. Transmission of ITU-R BO.1294 System B
BS EN ISO 534:2005 BS EN ISO 534:2005. Paper and board. Determination of thickness, density and specific volume
BS EN 1866:2005 BS EN 1866:2005. Mobile fire extinguishers
BS ISO 14490-4:2005 BS ISO 14490-4:2005. Optics and optical instruments. Test methods for telescopic systems. Test methods for astronomical telescopes
BS ISO 17744:2004 BS ISO 17744:2004. Plastics. Determination of specific volume as a function of temperature and pressure (pVT diagram). Piston apparatus method
BS ISO 20965:2005 BS ISO 20965:2005. Plastics. Determination of the transient extensional viscosity of polymer melts
BS ISO 16790:2005 BS ISO 16790:2005. Plastics. Determination of drawing characteristics of thermoplastics in the molten state
BS ISO 20683-1:2005 BS ISO 20683-1:2005. Aircraft ground equipment. Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear . Main-line aircraft
BS ISO 15994:2005 BS ISO 15994:2005. Graphic technology. Testing of prints. Visual lustre
BS ISO 4094:2005 BS ISO 4094:2005. Paper, board and pulps. International calibration of testing apparatus. Nomination and acceptance of standardizing and authorized laboratories
ISO15531-31 : 2004 EDTN 1 ISO15531-31 : 2004 EDTN 1. ISO15531-31 : 2004 Industrial automation systems and integration - Industrial manufacturing management data - . Part 31: Resource information model
BS ISO 6588-1:2005 BS ISO 6588-1:2005. Paper, board and pulps. Determination of pH of aqueous extracts. Cold extraction
BS ISO 6588-2:2005 BS ISO 6588-2:2005. Paper, board and pulps. Determination of pH of aqueous extracts. Hot extraction
BS ISO 16305:2005 BS ISO 16305:2005. Butter. Determination of firmness
BS ISO 8791-3:2005 BS ISO 8791-3:2005. Paper and board. Determination of roughness/smoothness (air leak methods). Sheffield method
BS EN 60118-7:2005 BS EN 60118-7:2005. Electroacoustics. Hearing aids. Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes
BS 8888:2004 BS 8888:2004. Technical product specification (TPS). Specification
BS EN 1274:2004 BS EN 1274:2004. Thermal spraying. Powders. Composition, technical supply conditions
BS ISO 4587:2003 BS ISO 4587:2003. Adhesives. Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
BS EN 657:2005 BS EN 657:2005. Thermal spraying. Terminology, classification
BS EN 14665:2004 BS EN 14665:2004. Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
BS EN 13630-2:2002 BS EN 13630-2:2002. Explosives for civil uses. Detonating cords and safety fuses. Determination of thermal stability of detonating cords and safety fuses
BS EN 13630-3:2002 BS EN 13630-3:2002. Explosives for civil uses. Detonating cords and safety fuses. Determination of sensitiveness to friction of the core of detonating cords
BS EN 13630-4:2002 BS EN 13630-4:2002. Explosives for civil uses. Detonating cords and safety fuses. Determination of sensitiveness to impact of detonating cords
BS EN 13630-6:2002 BS EN 13630-6:2002. Explosives for civil uses. Detonating cords and safety fuses. Determination of resistance to tension of detonating cords
BS EN 13630-7:2002 BS EN 13630-7:2002. Explosives for civil uses. Detonating cords and safety fuses. Determination of reliability of initiation of detonating cords
BS EN 13630-8:2002 BS EN 13630-8:2002. Explosives for civil uses. Detonating cords and safety fuses. Determination of resistance to water of detonating cords and safety fuses
BS EN 13630-11:2002 BS EN 13630-11:2002. Explosives for civil uses. Detonating cords and safety fuses. Determination of velocity of detonation of detonating cords
BS EN 13630-12:2002 BS EN 13630-12:2002. Explosives for civil uses. Detonating cords and safety fuses. Determination of burning duration of safety fuses
BS EN 13631-2:2002 BS EN 13631-2:2002. Explosives for civil uses. High explosives. Determination of thermal stability of explosives
BS EN 13631-4:2002 BS EN 13631-4:2002. Explosives for civil uses. High explosives. Determination of sensitiveness to impact of explosives
BS EN 13631-5:2002 BS EN 13631-5:2002. Explosives for civil uses. High explosives. Determination of resistance to water
BS EN 13631-6:2002 BS EN 13631-6:2002. Explosives for civil uses. High explosives. Determination of resistance to hydrostatic pressure
BS EN 13763-2:2002 BS EN 13763-2:2002. Explosives for civil uses. Detonators and relays. Determination of thermal stability
BS EN 13763-3:2002 BS EN 13763-3:2002. Explosives for civil uses. Detonators and relays. Determination of sensitiveness to impact
BS EN 13763-23:2002 BS EN 13763-23:2002. Explosives for civil uses. Detonators and relays. Determination of the shock-wave velocity of shock tube
BS EN 13763-24:2002 BS EN 13763-24:2002. Explosives for civil uses. Detonators and relays. Determination of the electrical non-conductivity of shock tube
BS EN 1555-5:2002 BS EN 1555-5:2002. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fitness for the purpose of the system
BS ISO 7206-10:2003 BS ISO 7206-10:2003. Implants for surgery. Partial and total hip-joint prostheses. Determination of resistance to static load of modular femoral heads
BS EN 14678-1:2006 BS EN 14678-1:2006. LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations. Dispensers
BS EN 14662-1:2005 BS EN 14662-1:2005. Ambient air quality. Standard method for measurement of benzene concentrations. Pumped sampling followed by thermal desorption and gas chromatography
BS EN 14662-2:2005 BS EN 14662-2:2005. Ambient air quality. Standard method for measurement of benzene concentrations. Pumped sampling followed by solvent desorption and gas chromatography
BS EN 14662-3:2005 BS EN 14662-3:2005. Ambient air quality. Standard method for measurement of benzene concentrations. Automated pumped sampling with in situ gas chromatography
ISO21128 : 2006 EDTN1 ISO21128 : 2006 EDTN1. ISO21128 : 2006 Cork Stoppers . Determination of oxidizing residues-Iodometric titration method
ISO12480-3 : 2005 EDTN1 ISO12480-3 : 2005 EDTN1. ISO12480-3 : 2005 Cranes - Safe use. Part 3: Tower cranes
BS ISO 21128:2006 BS ISO 21128:2006. Cork stoppers. Determination of oxidizing residues. Iodometric titration method
BS EN 61285:2004 BS EN 61285:2004. Industrial-process control. Safety of analyser houses
BS EN 14662-4:2005 BS EN 14662-4:2005. Ambient air quality. Standard method for measurement of benzene concentrations. Diffusive sampling followed by thermal desorption and gas chromatography
BS EN 14662-5:2005 BS EN 14662-5:2005. Ambient air quality. Standard method for measurement of benzene concentrations. Diffusive sampling followed by solvent desorption and gas chromatography
BS EN 13160-1:2003 BS EN 13160-1:2003. Leak detection systems. General principles
DD IEC TS 62370:2004 DD IEC TS 62370:2004. Electroacoustics. Instruments for the measurement of sound intensity. Electromagnetic and electrostatic compatability requirements and test procedures
BS EN 13160-3:2003 BS EN 13160-3:2003. Leak detection systems. Liquid systems for tanks
BS EN 13160-4:2003 BS EN 13160-4:2003. Leak detection systems. Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces
BS EN 13160-6:2003 BS EN 13160-6:2003. Leak detection systems. Sensors in monitoring wells
BS EN 13160-7:2003 BS EN 13160-7:2003. Leak detection systems. General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
BS EN 61857-1:2005 BS EN 61857-1:2005. Electrical insulation systems. Procedures for thermal evaluation. General requirements. Low-voltage
ISO/IEC21000-10 : 2006 EDTN1 ISO/IEC21000-10 : 2006 EDTN1. ISO/IEC21000-10 : 2006 Information technology - Multimedia framework (MPEG-21). Part 10: Digital item processing
BS ISO 9345-2:2003 BS ISO 9345-2:2003. Optics and optical instruments. Microscopes. Imaging distances related to mechanical reference planes. Infinity-corrected optical systems
BS EN 14873-1:2005 BS EN 14873-1:2005. Furniture removal activities. Storage of furniture and personal effects for private individuals. Specification for storage facility and related storage provision
BS EN 14873-2:2005 BS EN 14873-2:2005. Storage of furniture and personal effects for private individuals. Provision of the service
DD CEN/TS 14825:2003 DD CEN/TS 14825:2003. Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Testing and rating at part load
BS 6165:2002 BS 6165:2002. Specification for small disposable fire extinguishers of the aerosol type
ISO/IEC18036 : 2003 EDTN 1 ISO/IEC18036 : 2003 EDTN 1. ISO/IEC18036 Information technology -- Icon symbols and functions for World Wide Web browser toolbars
BS ISO 14461-1:2005 BS ISO 14461-1:2005. Milk and milk products. Quality control in microbiological laboratories. Analyst performance assessment for colony counts
BS ISO 14461-2:2005 BS ISO 14461-2:2005. Milk and milk products. Quality control in microbiological laboratories. Determination of the reliability of colony counts of parallel plates and subsequent di
BS EN 60704-3:2006 BS EN 60704-3:2006. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Procedure for determining and verifying declared noise
BS EN 62149-5:2003 BS EN 62149-5:2003. Fibre optic active components and devices. Performance standards. ATM-PON transceivers with LD driver and CDR ICs
CWA 14722-1:2003 CWA 14722-1:2003. Embedded financial transactional IC card reader (embedded FINREAD). Business requirements
CWA 14722-2:2003 CWA 14722-2:2003. Embedded financial transactional IC card reader (embedded FINREAD). Functional architecture and technical requirements
BS EN ISO 8501-1:2001 BS EN ISO 8501-1:2001. Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Rust grades and preparation gr
CWA 14722-3:2003 CWA 14722-3:2003. Embedded finacial transactional IC card reader (embedded FINREAD). Functional and security specifications
CWA 13988:2003 CWA 13988:2003. Guidance information for the use of Dublin Core in Europe
BS EN 14022:2003 BS EN 14022:2003. Structural adhesives. Determination of the pot life (working life) of multicomponent adhesives
DD CEN/TS 14689:2006 DD CEN/TS 14689:2006. Leather. Physical and mechanical tests. Determination of bagginess, creep and relaxation
03/106722 DC 03/106722 DC. EN 14690. Leather. Physical and mechanical tests. Determination of soiling
BS ISO 8082:2003 BS ISO 8082:2003. Self-propelled machinery for forestry. Roll-over protective structures. Laboratory tests and performance requirements
BS EN 13529:2003 BS EN 13529:2003. Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance to severe chemical attack
BS EN ISO 9241-110:2006 BS EN ISO 9241-110:2006. Ergonomics of human-system interaction. Dialogue principles
BS 5871-1:2005 BS 5871-1:2005. Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances. Gas fires, convector hea
BS 5871-3:2005 BS 5871-3:2005. Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances. Decorative fuel effect g
BS EN 61029-2-1:2002 BS EN 61029-2-1:2002. Safety of transportable motor-operated tools. Particular requirements for circular saw benches
BS EN ISO 15761:2002 BS EN ISO 15761:2002. Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
BS EN ISO 14644-4:2001 BS EN ISO 14644-4:2001. Cleanrooms and associated controlled environments. Design, construction and start-up
BS EN ISO 3727-3:2003 BS EN ISO 3727-3:2003. Butter. Determination of moisture, non-fat solids and fat contents. Calculation of fat content
BS EN 13032-1:2004 BS EN 13032-1:2004. Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. Measurement and file format
BS EN ISO 8362-3:2003 BS EN ISO 8362-3:2003. Injection containers and accessories. Aluminium caps for injection vials
BS EN 13035-3:2003 BS EN 13035-3:2003. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Cutting machines
BS EN 13035-4:2003 BS EN 13035-4:2003. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Tilting tables
BS EN 60239:2005 BS EN 60239:2005. Graphite electrodes for electric arc furnaces. Dimensions and designation
BS ISO 4081:2005 BS ISO 4081:2005. Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification
BS EN ISO 10139-1:2005 BS EN ISO 10139-1:2005. Dentistry. Soft lining materials for removable dentures. Materials for short-term use
BS ISO 5285:2004 BS ISO 5285:2004. Conveyor belts. Guidelines for storage and handling
BS EN 1159-2:2003 BS EN 1159-2:2003. Advanced technical ceramics. Ceramic composites. Thermophysical properties. Determination of thermal diffusivity
DD IEC TS 61804-1:2003 DD IEC TS 61804-1:2003. Function blocks (FB) for process control. Overview of system aspects
PD 0026:2003 PD 0026:2003. Software and systems quality framework. A guide to the use of ISO/IEC and other standards for understanding quality in software and systems
03/306346 DC 03/306346 DC. EN 14695. Flexible sheets for waterproofing. Reinforced bitumen sheets for waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Defini
PD CEN/TR 14613:2003 PD CEN/TR 14613:2003. Thermal performance of building materials and components. Principles for the determination of thermal properties of moist materials andcomponent s
BS 8723-2:2005 BS 8723-2:2005. Structured vocabularies for information retrieval. Guide. Thesauri
BS EN 62271-2:2003 BS EN 62271-2:2003. High-voltage switchgear and controlgear. Seismic qualification for rated voltages of 72,5 kV and above
DD CEN/TS 1555-7:2003 DD CEN/TS 1555-7:2003. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Guidance for the assessment of conformity
PD ISO/IEC TR 10176:2003 PD ISO/IEC TR 10176:2003. Information technology. Guidelines for the preparation of programming languages standards
BS EN 60728-11:2005 BS EN 60728-11:2005. Cable networks for television signals, sound signals and interactive services. Safety
BS EN 13391:2004 BS EN 13391:2004. Mechanical tests for post-tensioning systems
BS ISO 11850:2003 BS ISO 11850:2003. Machinery for forestry. Self-propelled machinery. Safety requirements
BS EN 13922:2003 BS EN 13922:2003. Tanks for transport of dangerous goods. Service equipment for tanks. Overfill prevention systems for liquid fuels
BS EN 1998-1:2004 BS EN 1998-1:2004. Eurocode 8. Design of structures for earthquake resistance. General rules, seismic actions and rules for buildings
BS ISO 14064-1:2006 BS ISO 14064-1:2006. Greenhouse gases. Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals
BS ISO 14064-2:2006 BS ISO 14064-2:2006. Greenhouse gases. Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or remova
BS EN 1998-3:2005 BS EN 1998-3:2005. Eurocode 8. Design of structures for earthquake resistance. Assessment and retrofitting of buildings
BS EN 1998-5:2004 BS EN 1998-5:2004. Eurocode 8. Design of structures for earthquake resistance. Foundations, retaining structures and geotechnical aspects
BS EN 13062:2003 BS EN 13062:2003. Products and systems for the protection and repair of concrete structures. Test method. Determination of thixotropy of products for protection of reinforcement
BS EN 1998-6:2005 BS EN 1998-6:2005. Eurocode 8. Design of structures for earthquake resistance. Towers, masts and chimneys
BS EN 60684-3-116 and 117:2003 BS EN 60684-3-116 and 117:2003. Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving. Extruded polychloroprene. Ge
BS EN ISO 3834-1:2005 BS EN ISO 3834-1:2005. Quality requirements for fusion welding of metallic materials. Criteria for the selection of the appropriate level of quality requirements
BS EN ISO 3834-2:2005 BS EN ISO 3834-2:2005. Quality requirements for fusion welding of metallic materials. Comprehensive quality requirements
BS EN ISO 3834-3:2005 BS EN ISO 3834-3:2005. Quality requirements for fusion welding of metallic materials. Standard quality requirements
BS EN ISO 3834-4:2005 BS EN ISO 3834-4:2005. Quality requirements for fusion welding of metallic materials. Elementary quality requirements
BS ISO 16063-21:2003 BS ISO 16063-21:2003. Methods for the calibration of vibration and shock transducers. Vibration calibration by comparison to a reference transducer
BS EN 1545-1:2005 BS EN 1545-1:2005. Identification card systems. Surface transport applications. Elementary data types, general code lists and general data elements
BS EN 1545-2:2005 BS EN 1545-2:2005. Identification card systems. Surface transport applications. Transport and travel payment related data elements and code lists
03/306745 DC 03/306745 DC. ISO/IEC 9594:2001 all parts. The Directory. Fourth Edition. Amendment 1. Extensions to support paged results on the DSP (ITU-T Rec. X.500)
03/306744 DC 03/306744 DC. ISO/IEC 9594:2001 All parts. The Directory. Fourth Edition. Amendment 2. Extensions to support the concept of friend attributes
BS ISO 21988:2006 BS ISO 21988:2006. Abrasion-resistant cast irons. Classification
PD IEC/TR 60825-13:2006 PD IEC/TR 60825-13:2006. Safety of laser products. Measurements for classification of laser products
BS EN 14010:2003 BS EN 14010:2003. Safety of machinery. Equipment for power driven parking of motor vehicles. Safety and EMC requirements for design, manufacturing, erection and commissioning stages
BS 4592-0:2006 BS 4592-0:2006. Industrial type flooring and stair treads. Common design requirements and recommendations for installation
BS 4592-1:2006 BS 4592-1:2006. Industrial type flooring and stair treads. Metal open bar gratings. Specification
BS 4592-2:2006 BS 4592-2:2006. Industrial type flooring and stair treads. Expanded metal gratings. Specification
BS 4592-3:2006 BS 4592-3:2006. Industrial type flooring and stair treads. Cold formed metal planks. Specification
BS 4592-4:2006 BS 4592-4:2006. Industrial type flooring and stair treads. Glass reinforced plastics (GRP) open bar gratings. Specification
BS 4592-5:2006 BS 4592-5:2006. Industrial type flooring and stair treads. Solid plates in metal and glass reinforced plastics (GRP). Specification
BS EN ISO 22827-1:2005 BS EN ISO 22827-1:2005. Acceptance tests for Nd:YAG laser beam welding machines. Machines with optical fibre delivery. Laser assembly
BS EN ISO 22827-2:2005 BS EN ISO 22827-2:2005. Acceptance tests for Nd:YAG laser beam welding machines. Machines with optical fibre delivery. Moving mechanism
BS EN 14700:2005 BS EN 14700:2005. Welding consumables. Welding consumables for hard-facing
BS EN ISO 9073-13:2007 BS EN ISO 9073-13:2007. Textiles. Test methods for nonwovens. Repeated liquid strike-through time
BS EN ISO 9073-14:2007 BS EN ISO 9073-14:2007. Textiles. Test methods for nonwovens. Coverstock wetback
BS EN 14705:2005 BS EN 14705:2005. Heat exchangers. Method of measurement and evaluation of thermal performances of wet cooling towers
BS EN 14175-4:2004 BS EN 14175-4:2004. Fume cupboards. On-site test methods
EN60086-3 (IEC60086-3 : 2004) AS EN60086-3 (IEC60086-3 : 2004) AS. EN60086-3 : 2005 Primary batteries. Part 3: Watch batteries
BS EN 60086-3:2005 BS EN 60086-3:2005. Primary batteries. Watch batteries
BS EN ISO 14675:2003 BS EN ISO 14675:2003. Milk and milk products. Guidelines for a standardized description of competitive enzyme immunoassays. Determination of aflatoxin M1 content
BS EN ISO 14155-1:2003 BS EN ISO 14155-1:2003. Clinical investigation of medical devices for human subjects. General requirements
PAS 1188-1:2003 PAS 1188-1:2003. Flood protection products. Specification. Building apertures
ISO7331 : 2005 EDTN 3 ISO7331 : 2005 EDTN 3. ISO7331 : 2005 Ski-poles for alpine skiining. Requirements and test methods
BS EN 60704-2-5:2005 BS EN 60704-2-5:2005. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for electric thermal stora
BS EN 14691:2005 BS EN 14691:2005. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Compatibility by heat conditioning
BS EN 12274-5:2003 BS EN 12274-5:2003. Slurry surfacing. Test methods. Determination of wearing
BS EN 14692:2005 BS EN 14692:2005. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the resistance to com
BIP 2003:2003 BIP 2003:2003. Fire Extinguishing Systems. A guide to the types, application and considerations
BIP 2009:2003 BIP 2009:2003. Fire Detection and Alarm Systems. A guide to the BS Code, BS 5839-1 :2002
BIP 2004:2003 BIP 2004:2003. Fire Safety in Care Homes for Older People and Children
BS EN 14693:2006 BS EN 14693:2006. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the behaviour of bitu
BS EN 14694:2005 BS EN 14694:2005. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of resistance to dynamic
BIP 2005:2003 BIP 2005:2003. (IMS). Management of Customer Satisfaction. (Integrated Management Systems Series)
BIP 2007:2003 BIP 2007:2003. Basic Guide to Fire Engineering
BS EN 55016-4-2:2004 BS EN 55016-4-2:2004. Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Uncertainty in EMC measureme
BS EN 60379:2004 BS EN 60379:2004. Methods for measuring the performance of electric storage water-heaters for household purposes
PD ISO/TR 10017:2003 PD ISO/TR 10017:2003. Guidance on statistical techniques for ISO 9001:2000
BS ISO 5700:2006 BS ISO 5700:2006. Wheeled tractors for agriculture and forestry. Roll-over protective structures (ROPS). Static test method and acceptance conditions
BS EN ISO 15084:2003 BS EN ISO 15084:2003. Small craft. Anchoring, mooring and towing. Strong points
BS EN 60317-15:2004 BS EN 60317-15:2004. Specifications for particular types of winding wires. Polyesterimide enamelled round aluminium wire, class 180
BS EN 60317-18:2004 BS EN 60317-18:2004. Specifications for particular types of winding wires. Polyvinyl acetal enamelled rectangular copper wire, class 120
BS EN 60317-22:2004 BS EN 60317-22:2004. Specifications for particular types of winding wires. Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
BS EN 14666:2005 BS EN 14666:2005. Surface active agents. Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules. Gas chromatographic method
BS EN 14667:2005 BS EN 14667:2005. Surface active agents. Determination of low boiling solvents in liquid formulations. Gas chromatographic method
05/30094604 DC 05/30094604 DC. BS 7000-3. Design management systems. Part 3. Managing the design of services. Guide
BS EN ISO 21329:2004 BS EN ISO 21329:2004. Petroleum and natural gas industries. Pipeline transportation systems. Test procedures for mechanical connectors
BS EN 14669:2005 BS EN 14669:2005. Surface active agents. Determination of anionic surface active agents and soaps in detergents and cleansers. Potentiometric two-phase titration method
BS EN 14670:2005 BS EN 14670:2005. Surface active agents. Sodium dodecyl sulfate. Analytical method
BS EN 14863:2005 BS EN 14863:2005. Vitreous and porcelain enamels. Determination of the edge covering of enamelled steel plate to be used in heat exchangers
BS EN 14866:2005 BS EN 14866:2005. Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications
WD/ISO/IEC18051 : 2004 EDTN2 WD/ISO/IEC18051 : 2004 EDTN2. ISO/IEC18051 : 2004 Information technology - Telecommunications and information exchange between systems - Services for Computer Supported Te
BS EN 50289-1-13:2004 BS EN 50289-1-13:2004. Communication cables. Specifications for test methods. Electrical test methods. Coupling attenuation or screening attenuation of patch cords/coaxial cable
BS EN 50289-1-14:2004 BS EN 50289-1-14:2004. Communication cables. Specifications for test methods. Electrical test methods. Coupling attenuation or screening attenuation of connecting hardware
BS EN 50289-1-15:2004 BS EN 50289-1-15:2004. Communication cables. Specifications for test methods. Electromagnetic performance. Coupling attenuation of links and channels (laboratory conditions)
WD/ISO/IEC18056 : 2004 EDTN1 WD/ISO/IEC18056 : 2004 EDTN1. ISO/IEC18056 Information technology - Telecommunications and information exchange between systems - XML Protocol for Computer Supported Telec
WD/ISO/IEC17343 : 2004 EDTN.1 WD/ISO/IEC17343 : 2004 EDTN.1. ISO/IEC 17343 Information technology - Telecommunications and information exchange between systems - Corporate telecommunication networks -
BS EN 62047-1:2006 BS EN 62047-1:2006. Semiconductor devices. Micro-electromechanical devices. Terms and definitions
BS ISO 11093-9:2006 BS ISO 11093-9:2006. Paper and board. Testing of cores. Determination of flat crush resistance
BS EN 13920-8:2003 BS EN 13920-8:2003. Aluminium and aluminium alloys. Scrap. Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes
BS EN 61000-6-2:2005 BS EN 61000-6-2:2005. Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments
BS EN 61000-6-1:2007 BS EN 61000-6-1:2007. Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light-industrial environments
BS ISO 13284:2003 BS ISO 13284:2003. Fork-lift trucks. Fork-arm extensions and telescopic fork arms. Technical characteristics and strength requirements
BS EN 2632:2005 BS EN 2632:2005. Aerospace series. Aluminim alloy AL-P7075. T73511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
BS ISO 251:2003 BS ISO 251:2003. Conveyor belts with textile carcass. Widths and lengths
BS EN 3338:2005 BS EN 3338:2005. Aerospace series. Aluminim alloy AL-P7050. T74511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
BS EN 3342:2005 BS EN 3342:2005. Aerospace series. Aluminim alloy AL-P6061. T4 or T42. Drawn or extruded bar and section. a or D ≤ 150 mm
BS EN 3344:2005 BS EN 3344:2005. Aerospace series. Aluminim alloy AL-P7050. T76511. Extruded bar and section. a or D $3l 150 mm with peripheral coarse grain control
BS EN 3347:2005 BS EN 3347:2005. Aerospace series. Aluminim alloy AL-P2024. T8511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
BS EN 2635:2005 BS EN 2635:2005. Aerospace series. Aluminium alloy AL-P2014A. T6511. Extruded bar and section. a or D ≤ 200 mm with peripheral coarse grain control
06/30094759 DC 06/30094759 DC. EN ISO 9241-171. Ergonomics of human-system interaction. Part 171. Guidance on software accessibility
BS EN 2702:2005 BS EN 2702:2005. Aerospace series. Aluminium alloy. AL-P6061. T6 or T62. Drawn or extruded bar and section. a or D ≤ 200 mm
BS ISO/IEC 15423:2004 BS ISO/IEC 15423:2004. Information technology. Automatic identification and data capture techniques. Bar code scanner and decoder performance testing
PD ISO/IEC TR 19782:2006 PD ISO/IEC TR 19782:2006. Information technology. Automatic identification and data capture techniques. Effects of gloss and low substrate opacity on reading of bar coding sym
BS EN 13427:2004 BS EN 13427:2004. Packaging. Requirements for the use of European Standards in the field of packaging and packaging waste
BS EN 13428:2004 BS EN 13428:2004. Packaging. Requirements specific to manufacturing and composition. Prevention by source reduction
BS EN 13429:2004 BS EN 13429:2004. Packaging. Reuse
BS EN 13430:2004 BS EN 13430:2004. Packaging. Requirements for packaging recoverable by material recycling
BS EN 13431:2004 BS EN 13431:2004. Packaging. Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value
BS ISO 226:2003 BS ISO 226:2003. Acoustics. Normal equal-loudness-level contours
CWA 14729-1:2003 CWA 14729-1:2003. The Intrastat system. The implementation model
CWA 14729-2:2003 CWA 14729-2:2003. The Intrastat system. Message implementation guideline of INSTA/XML
BS EN 61360-5:2004 BS EN 61360-5:2004. Standard data element types with associated classification scheme for electric components. Extensions to the EXPRESS dictionary schema
06/30094836 DC 06/30094836 DC. ISO 3743-1. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering method for small movable sources in
05/30094854 DC 05/30094854 DC. ISO 3746. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Survey method using an enveloping measurement sur
BS EN 60601-2-2:2007 BS EN 60601-2-2:2007. Medical electrical equipment. Particular requirements for the safety of high frequency surgical equipment
DD ISO/TS 19138:2006 DD ISO/TS 19138:2006. Geographic information. Data quality measures
BS ISO 16902-1:2003 BS ISO 16902-1:2003. Hydraulic fluid power. Test code for the determination of sound power levels using sound intensity techniques. Engineering method. Pumps
BS ISO 15886-1:2004 BS ISO 15886-1:2004. Agricultural irrigation equipment. Definition of terms and classification
BS ISO 15886-3:2004 BS ISO 15886-3:2004. Agricultural irrigation equipment. Sprinklers. Characterization of distribution and test methods
BS EN ISO 14159:2004 BS EN ISO 14159:2004. Safety of machinery. Hygiene requirements for the design of machinery
BS EN 10140:2006 BS EN 10140:2006. Cold rolled narrow steel strip. Tolerances on dimensions and shape
ISO24214 : 2006 EDTN1 ISO24214 : 2006 EDTN1. ISO24214 : 2006 Skin barrier adhesives for ostomy aids. Vocabulary
BS ISO 18899:2004 BS ISO 18899:2004. Rubber. Guide to the calibration of test equipment
ISO12468-2 : 2005 EDTN 1 ISO12468-2 : 2005 EDTN 1. ISO12468-2 : 2005 External exposure of roofs to fire. Part 2: Classification of roofs
ISO7240-6 : 2004 EDTN1 ISO7240-6 : 2004 EDTN1. ISO7240-6 : 2004 Fire detection and alarm systems -. Part 6: Carbon monoxide fire detectors using electro-chemical cells
ISO7240-11 : 2005 EDTN1 ISO7240-11 : 2005 EDTN1. ISO7240-11 : 2005 Fire detection and alarm systems -. Part 11: Manual call points
PD IEC TR 62210:2003 PD IEC TR 62210:2003. Power system control and associated communications. Data and communication security
BS ISO 1431-1:2004 BS ISO 1431-1:2004. Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Static and dynamic strain testing
03/308588 DC 03/308588 DC. ISO/IEC 19777-1. Extensible 3D (X3D) Language bindings. Part 1. ECMA Script
DD CEN ISO/TS 15011-5:2006 DD CEN ISO/TS 15011-5:2006. Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Identification of thermal-degradation products
DD CEN/TS 14632:2006 DD CEN/TS 14632:2006. Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester
BS EN 10169-2:2006 BS EN 10169-2:2006. Continuously organic coated (coil coated) steel flat products. Products for building exterior applications
BS EN ISO 139:2005 BS EN ISO 139:2005. Textiles. Standard atmospheres for conditioning and testing
ISO661 : 2003 EDTN 3 ISO661 : 2003 EDTN 3. ISO661 : 2003 Animal and vegetable fats and oils- Preparation of test sample
BS EN ISO 13927:2003 BS EN ISO 13927:2003. Plastics. Simple heat release test using a conical radiant heater and a thermopile detector
BS EN 14016-2:2004 BS EN 14016-2:2004. Binders for magnesite screeds. Caustic magnesia and magnesium chloride. Test methods
BS EN 14016-1:2004 BS EN 14016-1:2004. Binders for magnesite screeds. Caustic magnesia and magnesium chloride. Definitions, requirements
BS EN 10319-2:2006 BS EN 10319-2:2006. Metallic materials. Tensile stress relaxation testing. Procedure for bolted joint models
BS 7533-3:2005 BS 7533-3:2005. Pavements constructed with clay, natural stone or concrete pavers. Code of practice for laying precast concrete paving blocks and clay pavers for flexible pavements
BS 7533-4:2006 BS 7533-4:2006. Pavements constructed with clay, natural stone or concrete pavers. Code of practice for the construction of pavements of precast concrete flags or natural stone slabs
PD 6612:2004 PD 6612:2004. Guidance on the preparation of codes of practice for building
BS ISO 302:2004 BS ISO 302:2004. Pulps. Determination of Kappa number
BS ISO 5351:2004 BS ISO 5351:2004. Pulps. Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
BS EN 14706:2005 BS EN 14706:2005. Thermal insulation products for building equipment and industrial installations. Determination of maximum service temperature
BS EN 14349:2004 BS EN 14349:2004. Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of bacterial activity of chemical disinfectants and antiseptics used in the vete
BS EN 60352-2:2006 BS EN 60352-2:2006. Solderless connections. Crimped connections. General requirements, test methods and practical guidance
BS EN ISO 15065:2005 BS EN ISO 15065:2005. Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
BS EN 12266-1:2003 BS EN 12266-1:2003. Industrial valves. Testing of valves. Pressure tests, test procedures and acceptance criteria. Mandatory requirements
BS EN 12266-2:2002 BS EN 12266-2:2002. Industrial valves. Testing of valves. Tests, test procedures and acceptance criteria. Supplementary requirements
BS EN ISO 389-7:2005 BS EN ISO 389-7:2005. Acoustics. Reference zero for the calibration of audiometric equipment. Reference threshold of hearing under free-field and diffuse-field listening condition
BS EN 12697-42:2005 BS EN 12697-42:2005. Bituminous mixtures. Test methods for hot mix asphalt. Amount of coarse foreign matter in reclaimed asphalt
BS EN ISO 6506-1:2005 BS EN ISO 6506-1:2005. Metallic materials. Brinell hardness test. Test method
BS EN ISO 6506-2:2005 BS EN ISO 6506-2:2005. Metallic materials. Brinell hardness test. Verification and calibration of testing machines
BS EN ISO 6506-3:2005 BS EN ISO 6506-3:2005. Metallic materials. Brinell hardness test. Calibration of reference blocks
BS EN ISO 6506-4:2005 BS EN ISO 6506-4:2005. Metallic materials. Brinell hardness test. Table of hardness values
BS EN 14710-2:2005 BS EN 14710-2:2005. Fire-fighting pumps. Fire-fighting centrifugal pumps without primer. Verification of general and safety requirements
BS EN 60730-1:2001+A2:2008 BS EN 60730-1:2001+A2:2008. Automatic electrical controls for household and similar use. General requirements
BS EN 12412-2:2003 BS EN 12412-2:2003. Thermal performance of windows, doors and shutters. Determination of thermal transmittance by hot box method. Frames
BS EN 12412-4:2003 BS EN 12412-4:2003. Thermal performance of windows, doors and shutters. Determination of thermal transmittance by hot box method. Roller shutter boxes
BS ISO 17557:2003 BS ISO 17557:2003. Plastics. Film and sheeting. Cast polypropylene (PP) films
DD ENV 14464:2002 DD ENV 14464:2002. Sawn timber. Method for assessment of case-hardening
DD CEN ISO/TS 17845:2004 DD CEN ISO/TS 17845:2004. Welding and allied processes. Designation system for imperfections
BS ISO 9898:2000 BS ISO 9898:2000. Equipment for crop protection. Test methods for air-assisted sprayers for bush and tree crops
BS ISO 7270-2:2005 BS ISO 7270-2:2005. Rubber. Analysis by pyrolytic gas-chromatographic methods. Determination of styrene/butadiene/isoprene ratio
BS ISO 17555:2003 BS ISO 17555:2003. Plastics. Film and sheeting. Biaxially oriented polypropylene (PP) films
PD CEN/TR 14589:2003 PD CEN/TR 14589:2003. Characterization of waste. State of the art document. Chromium VI specification in solid matrices
03/308804 DC 03/308804 DC. ISO 4254-6. Tractors and machinery for agriculture and forestry. Technical means for ensuring safety. Part 6: Sprayers and liquid fertilizer distributors
ISO16834 : 2006 EDTN1 ISO16834 : 2006 EDTN1. ISO16834 : 2006 Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification
BS ISO 13296:2005 BS ISO 13296:2005. Diesel engines. High-pressure fuel injection pipe assemblies. General requirements and dimensions
BS ISO 2974:2005 BS ISO 2974:2005. Diesel engines. High-pressure fuel injection pipe end-connections with 60° female cone
BS EN ISO 10437:2003 BS EN ISO 10437:2003. Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications
BS ISO 23718:2007 BS ISO 23718:2007. Metallic materials. Mechanical testing. Vocabulary
BS 6150:2006 BS 6150:2006. Painting of buildings. Code of practice
BS EN 50350:2004 BS EN 50350:2004. Charging control systems for household electric room heating of the storage type. Methods for measuring performance
PAS 55-2:2003 PAS 55-2:2003. Asset management. Guidelines for the application of PAS 55-1
BS EN 14845-2:2006 BS EN 14845-2:2006. Test methods for fibres in concrete. Effect on concrete
BS EN 451-1:2003 BS EN 451-1:2003. Method of testing fly ash. Determination of free calcium oxide content
BS ISO 14794:2003 BS ISO 14794:2003. Heavy commercial vehicles and buses. Braking in a turn. Open-loop test methods
BS ISO 3140:2005 BS ISO 3140:2005. Oil of sweet orange [Citrus sinensis (L.) Obsbeck], obtained by mechanical treatment
BS ISO 4121:2003 BS ISO 4121:2003. Sensory analysis. Guidelines for the use of quantitative response scales
03/108067 DC 03/108067 DC. IEC 60044-2 ED. 2.0. Instrument transformers. Part 2. Inductive voltage transformers
BS EN 60384-14:2005 BS EN 60384-14:2005. Fixed capacitors for use in electronic equipment. Sectional specification. Fixed capacitors for electromagnetic interference suppression and connection to the
BS EN 60384-14-1:2005 BS EN 60384-14-1:2005. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors for electromagnetic interference suppression and connection
BS ISO 21005:2004 BS ISO 21005:2004. Ships and marine technology. Thermally toughened safety glass panes for windows and side scuttles
BS ISO 16247:2004 BS ISO 16247:2004. Road vehicles. Detection of exhaust systems leaks. Helium test method and detection device specification
BS ISO 5797:2004 BS ISO 5797:2004. Ships and marine technology. Windows and side scuttles for fire-resistant constructions
BS EN 60758:2005 BS EN 60758:2005. Synthetic quartz crystal. Specifications and guide to the use
BS EN 62276:2005 BS EN 62276:2005. Single crystal wafers applied for surface acoustic wave (SAW) device applications. Specification and measuring methods
04/30095586 DC 04/30095586 DC. EN 1254-6. Copper and copper alloys. Plumbing fittings. Part 6. Fitting with push-fit ends
04/30095590 DC 04/30095590 DC. EN 1254-7. Copper and copper alloys. Plumbing fittings. Part 7. Fittings with press ends for metallic tubes
03/107475 DC 03/107475 DC. IEC 61249-6-3 ED.1.0. Materials for interconnection structures. Part 6-3. Sectional specification for reinforcements. Woven fibreglass fabrics
BS EN ISO 11641:2003 BS EN ISO 11641:2003. Leather. Tests for colour fastness. Colour fastness to perspiration
BS EN ISO 11644:2003 BS EN ISO 11644:2003. Leather. Test for adhesion of finish
03/106712 DC 03/106712 DC. IEC 62326-3 ED.1.0. Printed boards. Part 3. Safety certification of rigid printed circuit boards for electronic assemblies
BS EN 62044-2:2005 BS EN 62044-2:2005. Cores made of soft magnetic materials. Measuring methods. Magnetic properties at low excitation level
BS EN 60974-1:2005 BS EN 60974-1:2005. Arc welding equipment. Welding power sources
BS EN 61400-1:2005 BS EN 61400-1:2005. Wind turbines. Design requirements
BS ISO 17853:2003 BS ISO 17853:2003. Wear of implant materials. Polymer and metal wear particles. Isolation, characterization and quantification
BS EN 13832-1:2006 BS EN 13832-1:2006. Footwear protecting against chemicals. Terminology and test methods
BS EN 13832-2:2006 BS EN 13832-2:2006. Footwear protecting against chemicals. Requirements for footwear resistant to chemicals under laboratory conditions
BS EN 13832-3:2006 BS EN 13832-3:2006. Footwear protecting against chemicals. Requirements for footwear highly resistant to chemicals under laboratory conditions
BS EN ISO 7500-2:2006 BS EN ISO 7500-2:2006. Metallic materials. Verification of static uniaxial testing machines. Tension creep testing machines. Verification of the applied force
PD ISO/IEC TR 19755:2003 PD ISO/IEC TR 19755:2003. Information technology. Programming languages, their environments and system software interfaces. Object finalization for programming language COBOL
BS EN 14713:2005 BS EN 14713:2005. Adhesives for paper and board, packaging and disposable sanitary products. Determination of friction properties of films potentially suitable for bonding
BS EN 13440:2003 BS EN 13440:2003. Packaging. Rate of recycling. Definition and method of calculation
BS ISO 3438:2003 BS ISO 3438:2003. Subland twist drills with Morse taper shanks for holes prior to tapping screw threads
BS EN 61858:2005 BS EN 61858:2005. Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS
BS EN 61857-21:2004 BS EN 61857-21:2004. Electrical insulation systems. Procedures for thermal evaluation. Specific requirements for general purpose models. Wire-wound applications
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
