BIS Standards Catalogue
TH 42043 TH 42043. Motor Vehicles and Equipment. An international guide to the application of EC, ECE and national approval schemes
TH 20344 TH 20344. Boilers and Pressure Vessels. An international survey of design and approval requirements
TH 42056 TH 42056. CE Marking for Electromagnetic Compatibility. A guide to the EMC Directive
TH 42072 TH 42072. CE Marking for Personal Protective Equipment. A guide to the European Directive
TH 42075 TH 42075. The Low Voltage Directive. A guide to CE marking
TH 42073 TH 42073. CE Marking for Machinery. A guide to the European Directive
BS EN 12044:2005 BS EN 12044:2005. Footwear, leather and imitation leather goods manufacturing machines. Cutting and punching machines. Safety requirements
BS EN 13476-1:2007 BS EN 13476-1:2007. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypro
BS 6472-1:2008 BS 6472-1:2008. Guide to evaluation of human exposure to vibration in buildings. Vibration sources other than blasting
BS EN ISO 15883-4:2008 BS EN ISO 15883-4:2008. Washer-disinfectors. Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes
08/19974897 DC 08/19974897 DC. BS ISO 16269-4. Statistical interpretation of data. Part 4. Detection and treatment of outliers
08/19979365 DC 08/19979365 DC. BS ISO 15928-3. Houses. Description of performance. Part 3. Structural durability
ISO12574-2 : 2008 EDTN1 ISO12574-2 : 2008 EDTN1. ISO12574 : 2008 Thermal insulation - Cellulose-fibre loose fill for horizontal applications in ventilated roof spaces. Part 2:Principal responsibilitie
DD 14035:2007 DD 14035:2007. Fireworks. Selection packs. Specification
ISO10303-221 : 2007 (CDROM) ISO10303-221 : 2007 (CDROM). ISO10303-221 : 2007 Industrial automation systems and integration. Product data representation and exchange. Part 221. Application protocol. Fu
BS 8471:2007 BS 8471:2007. Guide to particle sizing methods
07/19990769 DC 07/19990769 DC. BS EN 2857-002. Aerospace series. Metallic materials. Tests for ferromagnetic materials. Non-destructive testing. Magnetic particle inspection. Part 2. Inspection requir
07/19990771 DC 07/19990771 DC. BS EN 2857-001. Aerospace series. Metallic materials. Test methods for ferromagnetic materials. Non- destructive testing. Magnetic particle inspection. Part 1. General r
ISO12580 : 2007 EDTN1 ISO12580 : 2007 EDTN1. ISO12580 : 2007 Timber structures - Glued laminated timber - Glue-line delamination
ISO12579 : 2007 EDTN1 ISO12579 : 2007 EDTN1. ISO12579 : 2007 Timber structures - Glued laminated timber - Method of test for shear strength of glue lines
ISO12578 : 2008 EDTN1 ISO12578 : 2008 EDTN1. ISO12578 : 2008 Timber structures. Glued laminated timber. Component performance and production requirements
PD ISO/TR 22514-4:2007 PD ISO/TR 22514-4:2007. Statistical methods in process management. Capability and performance. Process capability estimates and performance measures
BS ISO 8999:2001 BS ISO 8999:2001. Reciprocating internal combustion engines. Graphical symbols
BS EN 4346:2007 BS EN 4346:2007. Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm
BS EN 4347:2007 BS EN 4347:2007. Aerospace series. Steel FE-PM1506 (X3CrNiMoAl13-8-2). Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D ≤ 300 mm
BS 8410:2007 BS 8410:2007. Code of practice for lightweight temporary cladding for weather protection and containment on construction works
BS ISO 14127:2008 BS ISO 14127:2008. Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents
BS EN 10253-2:2007 BS EN 10253-2:2007. Butt-welding pipe fittings. Non alloy and ferritic alloy steels with specific inspection requirements
BS EN 3361:2007 BS EN 3361:2007. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a ≤ 6mm, 1070 MPa ≤ Rm ≤ 1
BS EN 3364:2007 BS EN 3364:2007. Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, softened, forging stock a or D ≤ 300 mm
BS ISO 461-1:2003 BS ISO 461-1:2003. Aircraft. Connectors for ground electrical supplies. Design, performance and test requirements
DD ISO/TS 22600-1:2006 DD ISO/TS 22600-1:2006. Health informatics. Privilege management and access control. Overview and policy management
TH 42097 TH 42097. The Construction Products Directive. A guide to the requirements and CE marking
BS ISO 16850:2007 BS ISO 16850:2007. Road vehicles. Pedestrian protection. Child head impact test method
BS EN 14392:2007 BS EN 14392:2007. Aluminium and aluminium alloys. Requirements for anodised products for use in contact with foodstuff
BS ISO 12500-1:2007 BS ISO 12500-1:2007. Filters for compressed air. Test methods. Oil aerosols
BS ISO 12500-2:2007 BS ISO 12500-2:2007. Filters for compressed air. Test methods. Oil vapours
DD ISO/TS 17924:2007 DD ISO/TS 17924:2007. Soil quality. Assessment of human exposure from ingestion of soil and soil material. Guidance on the application and selection of physiologically based extra
BS EN 3745-411:2007 BS EN 3745-411:2007. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Resistance to fluids
BS EN 4165-001:2007 BS EN 4165-001:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Technical specification
BS EN 4165-002:2007 BS EN 4165-002:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Specification of performance and contact arrangements
BS EN 4165-004:2007 BS EN 4165-004:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Stackable mounting receptacle 2 and 4 modules, series 2
BS EN 4165-005:2007 BS EN 4165-005:2007. Aerospace series. Connectors, electrical, rectangular, Modular. Operating temperatures 175 °C continuous. Stackable receptacle 2 and 4 modules, series 3. Produ
BS EN ISO 15012-2:2008 BS EN ISO 15012-2:2008. Health and safety in welding and allied processes. Requirements, testing and marking of equipment for air filtration. Determination of the minimum air vo
BS ISO 11078:2007 BS ISO 11078:2007. Aircraft. De-icing/anti-icing fluids. ISO type II, III and IV
BS EN 13921:2007 BS EN 13921:2007. Personal protective equipment. Ergonomic principles
BS EN 3745-203:2008 BS EN 3745-203:2008. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cable dimensions
BS EN 3745-410:2007 BS EN 3745-410:2007. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Thermal life
BS EN 3745-705:2007 BS EN 3745-705:2007. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Contrast measurement
BS ISO 20280:2007 BS ISO 20280:2007. Soil quality. Determination of arsenic, antimony and selenium in aqua regia soil extracts with electrothermal or hydride-generation atomic absorption spectrometry
BS ISO 6194-1:2007 BS ISO 6194-1:2007. Rotary shaft lip-type seals incorporating elastomeric sealing elements. Nominal dimensions and tolerances
BS ISO 6194-5:2008 BS ISO 6194-5:2008. Rotary-shaft lip-type seals incorporating elastomeric sealing elements. Identification of visual imperfections
BS EN 12952-11:2007 BS EN 12952-11:2007. Water-tube boilers and auxiliary installations. Requirements for limiting devices of the boiler and accessories
BS EN ISO 12215-6:2008 BS EN ISO 12215-6:2008. Small craft. Hull construction and scantlings. Structural arrangements and details
DD CEN/TS 15127-1:2005 DD CEN/TS 15127-1:2005. Health informatics. Testing of physiological measurement software. General
BS ISO 16031-2:2003 BS ISO 16031-2:2003. Aerospace fluid systems. O-Rings, inch series. Inside diameters and cross sections, tolerances and size-identification codes. Standard tolerances for non-hydra
BS EN ISO 11611:2007 BS EN ISO 11611:2007. Protective clothing for use in welding and allied processes
BS EN ISO 12215-5:2008 BS EN ISO 12215-5:2008. Small craft. Hull construction and scantlings. Design pressures for monohulls, design stresses, scantlings determination
PD ISO/IEC TR 15443-3:2007 PD ISO/IEC TR 15443-3:2007. Information technology. Security techniques. A framework for IT security assurance. Analysis of assurance methods
BS EN 61730-1:2007 BS EN 61730-1:2007. Photovoltaic (PV) module safety qualification. Requirements for construction
BS EN 61730-2:2007 BS EN 61730-2:2007. Photovoltaic (PV) module safety qualification. Requirements for testing
BS EN ISO 22435:2007 BS EN ISO 22435:2007. Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
BS 5385-3:2007 BS 5385-3:2007. Wall and floor tiling. Design and installation of internal and external ceramic floor tiles and mosaics in normal conditions. Code of practice
BS EN 3155-034:2007 BS EN 3155-034:2007. Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 08, male, type D, crimp, class R. Product standard
BS ISO 8843:2005 BS ISO 8843:2005. Aircraft. Crimp-removable contacts for electrical connectors. Identification system
BS ISO 16938-1:2008 BS ISO 16938-1:2008. Building construction. Determination of the staining of porous substrates by sealants used in joints. Test with compression
BS ISO 16938-2:2008 BS ISO 16938-2:2008. Building construction. Determination of the staining of porous substrates by sealants used in joints. Test without compression
BS EN 4604-004:2007 BS EN 4604-004:2007. Aerospace series. Cable, electrical, for signal transmission. Cable, microcoaxial, high immunity, 50 Ohms, 200°C, type WS. Product standard
BS EN 4604-007:2007 BS EN 4604-007:2007. Aerospace series. Cable, electrical, for signal transmission. Cable, coaxial 50 Ohms, 200°C, type WN. Product standard
BS ISO 18589-1:2005 BS ISO 18589-1:2005. Measurement of radioactivity in the environment. Soil. General guidelines and definitions
BS ISO 18589-2:2007 BS ISO 18589-2:2007. Measurement of radioactivity in the environment. Soil. Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
BS ISO 18589-3:2007 BS ISO 18589-3:2007. Measurement of radioactivity in the environment. Soil. Measurement of gamma-emitting radionuclides
BS EN 1993-1-7:2007 BS EN 1993-1-7:2007. Eurocode 3. Design of steel structures. Plated structures subject to out of plane loading
BS EN 1993-6:2007 BS EN 1993-6:2007. Eurocode 3. Design of steel structures. Crane supporting structures
BS EN 1999-1-1:2007 BS EN 1999-1-1:2007. Eurocode 9. Design of aluminium structures. General structural rules
BS EN 1999-1-3:2007 BS EN 1999-1-3:2007. Eurocode 9. Design of aluminium structures. Structures susceptible to fatigue
BS EN ISO 10286:2007 BS EN ISO 10286:2007. Gas cylinders. Terminology
BS ISO 7176-26:2007 BS ISO 7176-26:2007. Wheelchairs. Vocabulary
BS EN 4165-006:2007 BS EN 4165-006:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Plug for 2 and 4 modules, series 2. Product standard
BS EN 4165-009:2007 BS EN 4165-009:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Rack and panel plug for 2 and 4 modules, series 3. Prod
BS EN 4165-023:2007 BS EN 4165-023:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Tooling for assembly receptacle coding component. Produ
BS EN 4165-008:2007 BS EN 4165-008:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Rack and panel plug for 2 and 4 modules, series 2. Prod
BS EN 4165-018:2007 BS EN 4165-018:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Protective cover for receptacle 2 or 4 modules, series
BS EN 4165-020:2007 BS EN 4165-020:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Coupling system keyway for receptacle. Product standard
BS EN 4165-007:2007 BS EN 4165-007:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Plug for 2 and 4 modules, series 3. Product standard
BS EN 4165-010:2007 BS EN 4165-010:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Rack and panel rear mounted plug for 2 and 4 modules, s
BS EN 4165-011:2007 BS EN 4165-011:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Flange mounting receptacle 2 and 4 modules, series 2. P
BS EN 4165-021:2007 BS EN 4165-021:2007. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous. Coupling system keyway for plug. Product standard
ISO/IEC14476-3 : 2008 EDTN1 ISO/IEC14476-3 : 2008 EDTN1. ISO/IEC14476-3 : 2008 Information technology. Enhanced communications transport protocol. Specification of duplex multicast transport
BS EN 61249-4-1:2008 BS EN 61249-4-1:2008. Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilay
DD IEC/TS 61836:2007 DD IEC/TS 61836:2007. Solar photovoltaic energy systems. Terms, definitions and symbols
BS ISO 3724:2007 BS ISO 3724:2007. Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant
BS EN 14931:2006 BS EN 14931:2006. Pressure vessels for human occupancy (PVHO). Multi-place pressure chambers for hyperbaric therapy. Performance, safety requirements and testing
BS ISO 80000-3:2007 BS ISO 80000-3:2007. Quantities and units. Space and time
BS EN ISO 20743:2007 BS EN ISO 20743:2007. Textiles. Determination of antibacterial activity of antibacterial finished products
BS EN 13063-3:2007 BS EN 13063-3:2007. Chimneys. System chimneys with clay/ceramic flue liners. Requirements and test methods for air flue system chimneys
BS ISO 80000-4:2006 BS ISO 80000-4:2006. Quantities and units. Mechanics
BS EN 14492-1:2006 BS EN 14492-1:2006. Cranes. Power driven winches and hoists. Power driven winches
BS EN 14492-2:2006 BS EN 14492-2:2006. Cranes. Power driven winches and hoists. Power driven hoists
BS EN ISO 22674:2006 BS EN ISO 22674:2006. Dentistry. Metallic materials for fixed and removable restorations and appliances
BS EN 61753-1:2007 BS EN 61753-1:2007. Fibre optic interconnecting devices and passive components performance standard. General and guidance for performance standards
WD/ISO22794 : 2007 EDTN1 WD/ISO22794 : 2007 EDTN1. ISO22794 : 2007 Dentistry. Implantable materials for bone reconstruction in oral and maxillofacial surgery. Content of a technical file
BS EN 62282-3-1:2007 BS EN 62282-3-1:2007. Fuel cell technologies. Stationary fuel cell power systems. Safety
BS EN 378-3:2008 BS EN 378-3:2008. Refrigerating systems and heat pumps. Safety and environmental requirements. Installation site and personal protection
BS EN 378-4:2008 BS EN 378-4:2008. Refrigerating systems and heat pumps. Safety and environmental requirements. Operation, maintenance, repair and recovery
BS EN 62464-1:2007 BS EN 62464-1:2007. Magnetic resonance equipment for medical imaging. Determination of essential image quality parameters
BS EN 1497:2007 BS EN 1497:2007. Personal fall protection equipment. Rescue harnesses
BS EN 352-8:2008 BS EN 352-8:2008. Hearing protectors. Safety requirements and testing. Entertainment audio ear-muffs
BS EN 62132-3:2007 BS EN 62132-3:2007. Integrated circuits. Measurement of electromagnetic immunity, 150 kHz to 1 GHz. Bulk current injection (BCI) method
BS IEC 62340:2007 BS IEC 62340:2007. Nuclear power plants. Instrumentation and control systems important to safety. Requirements for coping with common cause failure (CCF)
BS ISO 12789-2:2008 BS ISO 12789-2:2008. Reference radiation fields. Simulated workplace neutron fields. Calibration fundamentals related to the basic quantities
BS EN ISO 9185:2007 BS EN ISO 9185:2007. Protective clothing. Assessment of resistance of materials to molten metal splash
BS EN 60027-2:2007 BS EN 60027-2:2007. Letter symbols to be used in electrical technology. Telecommunications and electronics
BS EN 60027-4:2007 BS EN 60027-4:2007. Letter symbols to be used in electric technology. Rotating electric machines
BS EN 3999:2007 BS EN 3999:2007. Aerospace series. Aluminium alloy AL-P2024-T351. Sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm
BS EN 4002:2007 BS EN 4002:2007. Aerospace series. Aluminium alloy AL-P2219-T81. Sheet and strip 0,5 mm ≤ a ≤ 6 mm
BS EN 140101-806:2008 BS EN 140101-806:2008. Detail Specification: Fixed low power film resistors. Metal film resistors on high grade ceramic, conformal coated or molded, axial or preformed leads
BS ISO 18695:2007 BS ISO 18695:2007. Textiles. Determination of resistance to water penetration. Impact penetration test
BS EN 14704-2:2007 BS EN 14704-2:2007. Determination of the elasticity of fabrics. Multiaxial tests
BS EN 14878:2007 BS EN 14878:2007. Textiles. Burning behaviour of children's nightwear. Specification
BS ISO 13506:2008 BS ISO 13506:2008. Protective clothing against heat and flame. Test method for complete garments. Prediction of burn injury using an instrumented manikin
BS EN 60068-2-2:2007 BS EN 60068-2-2:2007. Environmental testing. Tests. Test B. Dry heat
BS EN ISO 10424-2:2007 BS EN ISO 10424-2:2007. Petroleum and natural gas industries. Rotary drilling equipment. Threading and gauging of rotary shouldered thread connections
BS EN 1051-2:2007 BS EN 1051-2:2007. Glass in building. Glass blocks and glass pavers. Evaluation of conformity/Product standard
DD CEN/TS 14421:2006 DD CEN/TS 14421:2006. Hose tail and ferrule for crimping and swaging
BS 5702-3:2008 BS 5702-3:2008. Guide to statistical process control (SPC) charts for variables. Charting techniques for short runs and small mixed batches
BS EN 60384-23:2005 BS EN 60384-23:2005. Fixed capacitors for use in electronic equipment. Sectional specification. Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitor
BS ISO 23181:2007 BS ISO 23181:2007. Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using high viscosity fluid
BS EN 14637:2007 BS EN 14637:2007. Building hardware. Electrically controlled hold-open systems for fire/smoke door assemblies. Requirements, test methods, application and maintenance
BS EN 61189-3:2008 BS EN 61189-3:2008. Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Test methods for interconnection structures (printed b
BS IEC 61892-2:2005 BS IEC 61892-2:2005. Mobile and fixed offshore units. Electrical installations. System design
BS EN 60454-2:2007 BS EN 60454-2:2007. Pressure-sensitive adhesive tapes for electrical purposes. Methods of test
BS ISO 24343-1:2007 BS ISO 24343-1:2007. Resilient and laminate floor coverings. Determination of indentation and residual indentation. Residual indentation
BS ISO 24344:2008 BS ISO 24344:2008. Resilient floor coverings. Determination of flexibility and deflection
BS EN 1367-1:2007 BS EN 1367-1:2007. Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing
BS EN ISO 2692:2006 BS EN ISO 2692:2006. Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity require
BS EN 62311:2008 BS EN 62311:2008. Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
BS EN ISO 10931:2005 BS EN ISO 10931:2005. Plastics piping systems for industrial applications. Poly(vinylidene fluoride) (PVDF). Specifications for components and the system
BS EN 60745-2-21:2007 BS EN 60745-2-21:2007. Hand-held motor-operated electric tools. Safety. Particular requirements for drain cleaners
BS EN 61192-5:2007 BS EN 61192-5:2007. Workmanship requirements for soldered electric assemblies. Rework, modification and repair of soldered electronic assemblies
BS EN 61753-092-6:2007 BS EN 61753-092-6:2007. Fibre optic interconnecting devices and passive components performance standard. Non-connectorized single-mode circulators for category O. Uncontrolled e
BS ISO/IEC 25030:2007 BS ISO/IEC 25030:2007. Software engineering. Software product quality requirements and evaluation (SQuaRE). Quality requirements
BS ISO 9696:2007 BS ISO 9696:2007. Water quality. Measurement of gross alpha activity in non-saline water. Thick source method
BS 7394-2:2007 BS 7394-2:2007. Complete spectacles. Specification for prescription spectacles
ISO2137 : 2007 EDTN3 ISO2137 : 2007 EDTN3. ISO2137 : 2007 Petroleum products and lubricants. Determination of cone penetration of lubricating greases and petrolatum
BS EN 61340-5-1:2007 BS EN 61340-5-1:2007. Electrostatics. Protection of electronic devices from electrostatic phenomena. General requirements
BS ISO/IEC 15944-4:2007 BS ISO/IEC 15944-4:2007. Information technology. Business operational view. Business transaction scenarios. Accounting and economic ontology
BS EN 13476-2:2007 BS EN 13476-2:2007. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypro
08/30083041 DC 08/30083041 DC. BS ISO/IEC 20944-2. Information technology. Metadata Registry Interoperability and Bindings (MDR-IB). Part 2. Coding bindings
08/30083044 DC 08/30083044 DC. BS ISO/IEC 20944-3. Information technology. Metadata Registry Interoperability and Bindings (MDRIB). Part 3. API bindings
08/30083153 DC 08/30083153 DC. BS ISO/IEC 20944-1. Information technology. Metadata Registries Interoperability and Bindings (MDR-IB). Part 1. Framework, common vocabulary, and common provisions for c
BS EN 14944-3:2007 BS EN 14944-3:2007. Influence of cementitious products on water intended for human consumption. Test methods. Migration of substances from factory-made cementitious products
BS 1363-5:2008 BS 1363-5:2008. 13 A plugs, socket-outlets, adaptors and connection units. Specification for fused conversion plugs
BS EN 12967-1:2007 BS EN 12967-1:2007. Health informatics. Service architecture. Enterprise viewpoint
BS EN 13606-2:2007 BS EN 13606-2:2007. Health informatics. Electronic health record communication. Archetypes interchange specification
BS ISO 22538-1:2007 BS ISO 22538-1:2007. Space systems. Oxygen safety. Design of oxygen systems and components
BS ISO 22538-2:2007 BS ISO 22538-2:2007. Space systems. Oxygen safety. Selection of metallic materials for oxygen systems and components
08/30084134 DC 08/30084134 DC. BS ISO 22538-5. Space systems. Oxygen safety. Part 5. Operational and emergency procedures
BS ISO 11073-90101:2008 BS ISO 11073-90101:2008. Health informatics. Point-of-care medical device communication. Analytical instruments. Point-of-care test
BS ISO 17115:2007 BS ISO 17115:2007. Health informatics. Vocabulary for terminological systems
BS ISO 21930:2007 BS ISO 21930:2007. Sustainability in building construction. Environmental declaration of building products
BS ISO 15392:2008 BS ISO 15392:2008. Sustainability in building construction. General principles
BS ISO 15686-8:2008 BS ISO 15686-8:2008. Buildings and constructed assets. Service-life planning. Reference service life and service-life estimation
ISO3452-1 : 2008 EDTN1 ISO3452-1 : 2008 EDTN1. ISO3452-1 : 2008 Non-destructive testing. Penetrant testing. Part 1. General principles
BS EN 14587-1:2007 BS EN 14587-1:2007. Railway applications. Track. Flash butt welding of rails. New R220, R260, R260Mn and R350HT grade rails in a fixed plant
BS EN ISO 21587-1:2007 BS EN ISO 21587-1:2007. Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method). Apparatus, reagents, dissolution and gravimetric
BS ISO 23893-1:2007 BS ISO 23893-1:2007. Water quality. Biochemical and physiological measurements on fish. Sampling of fish, handling and preservation of samples
DD ISO/TS 23893-2:2007 DD ISO/TS 23893-2:2007. Water quality. Biochemical and physiological measurements on fish. Determination of ethoxyresorufin-O-deethylase (EROD)
BS 6400-3:2007 BS 6400-3:2007. Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not exceeding 6 m3/h. Low and medium pressure (3rd family gases)
BS 6100-3:2007 BS 6100-3:2007. Building and civil engineering. Vocabulary. Civil engineering. General
BS 6100-4:2008 BS 6100-4:2008. Building and civil engineering. Vocabulary. Transport
BS 6100-6:2008 BS 6100-6:2008. Building and civil engineering. Vocabulary. Construction parts
BS 6100-7:2008 BS 6100-7:2008. Building and civil engineering. Vocabulary. Services
BS 6100-8:2007 BS 6100-8:2007. Building and civil engineering. Vocabulary. Work with timber and wood-based panels
BS 6100-10:2007 BS 6100-10:2007. Building and civil engineering. Vocabulary. Contract terms
BS 6100-11:2007 BS 6100-11:2007. Building and civil engineering. Vocabulary. Performance characteristics, measurement and joints
BS 8204-6:2008 BS 8204-6:2008. Screeds, bases and in situ floorings. Synthetic resin floorings. Code of practice
BS EN 1744-5:2006 BS EN 1744-5:2006. Tests for chemical properties of aggregates. Determination of acid soluble chloride salts
BS EN 1744-6:2006 BS EN 1744-6:2006. Tests for chemical properties of aggregates. Determination of the influence of recycled aggregate extract on the initial setting time of cement
BS ISO 10651-5:2006 BS ISO 10651-5:2006. Lung ventilators for medical use. Particular requirements for basic safety and essential performance. Gas-powered emergency resuscitators
BS EN 60534-8-4:2005 BS EN 60534-8-4:2005. Industrial-process control valves. Noise considerations. Prediction of noise generated by hydrodynamic flow
BS EN ISO 8185:2007 BS EN ISO 8185:2007. Respiratory tract humidifiers for medical use. Particular requirements for respiratory humidification systems
BS EN 61753-062-6:2008 BS EN 61753-062-6:2008. Fibre optic interconnecting devices and passive components performance standard. Non-connectorized single-mode fibre optic pigtailed isolators for catego
BS EN ISO 283:2007 BS EN ISO 283:2007. Textile conveyor belts. Full thickness tensile strength, elongation at break and elongation at the reference load. Test method
BS EN 62282-5-1:2007 BS EN 62282-5-1:2007. Fuel cell technologies. Portable fuel cell power systems. Safety
08/30089959 DC 08/30089959 DC. BS 3998. Recommendations for tree work
BS EN 60445:2007 BS EN 60445:2007. Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals and conductor terminations
BS EN 60446:2007 BS EN 60446:2007. Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours or alphanumerics
BS EN 60745-2-5:2007 BS EN 60745-2-5:2007. Hand-held motor-operated electric tools. Safety. Particular requirements for circular saws
BS EN 60730-2-10:2007 BS EN 60730-2-10:2007. Automatic electrical controls for household and similar use. Particular requirements for motor-starting relays
ISO13408-1 : 2008 EDTN2 ISO13408-1 : 2008 EDTN2. ISO13408-1 : 2008 Aseptic processing of health care products . Part 1. General requirements
BS ISO 7176-14:2008 BS ISO 7176-14:2008. Wheelchairs. Power and control systems for electrically powered wheelchairs and scooters. Requirements and test methods
BS EN 179:2008 BS EN 179:2008. Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes. Requirements and test methods
BS EN 1125:2008 BS EN 1125:2008. Building hardware. Panic exit devices operated by a horizontal bar, for use on escape routes. Requirements and test methods
BS ISO 13628-11:2007 BS ISO 13628-11:2007. Petroleum and natural gas industries. Design and operation of subsea production systems. Flexible pipe systems for subsea and marine applications
BS EN ISO 7233:2008 BS EN ISO 7233:2008. Rubber and plastics hoses and hose assemblies. Determination of resistance to vacuum
BS EN ISO 11970:2007 BS EN ISO 11970:2007. Specification and approval of welding procedures for production welding of steel castings
08/30092426 DC 08/30092426 DC. BS ISO 12162. Thermoplastics materials for pipes and fittings for pressure applications. Classification, designation coefficient, and designation
BS EN 131-3:2007 BS EN 131-3:2007. Ladders. User instructions
BS EN 50444:2008 BS EN 50444:2008. Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for arc welding and allied processes
BS ISO 23269-1:2008 BS ISO 23269-1:2008. Ships and marine technology. Breathing apparatus for ships. Emergency escape breathing devices (EEBD) for shipboard use
DD ISO/TS 14934-4:2007 DD ISO/TS 14934-4:2007. Fire tests. Calibration of heat flux meters. Guidance on the use of heat flux meters in fire tests
08/30093077 DC 08/30093077 DC. BS EN 15269-10. Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements o
BS EN 12798:2007 BS EN 12798:2007. Transport quality management system. Road rail and inland navigation transport. Quality management system requirements to supplement EN ISO 9001 for the transport of
BS EN ISO 9241-151:2008 BS EN ISO 9241-151:2008. Ergonomics of human-system interaction. Guidance on World Wide Web user interfaces
BS EN ISO 252:2007 BS EN ISO 252:2007. Conveyor belts. Adhesion between constitutive elements. Test methods
BS EN ISO 583:2007 BS EN ISO 583:2007. Conveyor belts with a textile carcass. Total belt thickness and thickness of constitutive elements. Test methods
DD 8723-5:2008 DD 8723-5:2008. Structured vocabularies for information retrieval. Guide. Exchange formats and protocols for interoperability
BS EN 14688:2006 BS EN 14688:2006. Sanitary appliances. Wash basins. Functional requirements and test methods
BS ISO 7183:2007 BS ISO 7183:2007. Compressed-air dryers. Specifications and testing
BS ISO 12006-3:2007 BS ISO 12006-3:2007. Building construction. Organization of information about construction works. Framework for object-oriented information
BS EN ISO 216:2007 BS EN ISO 216:2007. Writing paper and certain classes of printed matter. Trimmed sizes. A and B series, and indication of machine direction
08/30094862 DC 08/30094862 DC. BS EN ISO 11201. Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions in
08/30094866 DC 08/30094866 DC. BS ISO 11202. Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions apply
08/30094874 DC 08/30094874 DC. EN ISO 11204. Acoustics. Noise emitted by machinery and equipment. Measu rement of emission sound pressure levels at a work station and at other specified positions appl
BS ISO 17751:2007 BS ISO 17751:2007. Textiles. Quantitative analysis of animal fibres by microscopy. Cashmere, wool, speciality fibres and their blends
BS ISO 10190:2008 BS ISO 10190:2008. Motor cycle chains. Characteristics and test methods
BS ISO 5489:2008 BS ISO 5489:2008. Ships and marine technology. Embarkation ladders
BS EN 443:2008 BS EN 443:2008. Helmets for fire fighting in buildings and other structures
BS EN 1077:2007 BS EN 1077:2007. Helmets for alpine skiers and snowboarders
DD ISO/TS 19708:2007 DD ISO/TS 19708:2007. Geosynthetics. Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method
BS EN 14845-1:2007 BS EN 14845-1:2007. Test methods for fibres in concrete. Reference concretes
BS EN 62314:2006 BS EN 62314:2006. Solid-state relays
BS ISO 13404:2007 BS ISO 13404:2007. Prosthetics and orthotics. Categorization and description of external orthoses and orthotic components
DD IEC/TS 60519-5:2008 DD IEC/TS 60519-5:2008. Safety in electroheat installations. Specifications for safety in plasma installations
08/30096501 DC 08/30096501 DC. BS ISO 12111. Metallic materials. Fatigue testing. Strain-controlled thermomechanical fatigue testing method
BS EN 1486:2007 BS EN 1486:2007. Protective clothing for fire-fighters. Test methods and requirements for reflective clothing for specialized fire-fighting
BS ISO 2490:2007 BS ISO 2490:2007. Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module. Nominal dimensions
BS 5871-4:2007 BS 5871-4:2007. Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances. Independent gas-fired fl
BS EN 934-5:2007 BS EN 934-5:2007. Admixtures for concrete, mortar and grout. Admixtures for sprayed concrete. Definitions, requirements, conformity, marking and labelling
BS EN 3746:2007 BS EN 3746:2007. Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Hardness 80 IRHD
BS EN 3747:2007 BS EN 3747:2007. Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Technical specification
BS EN 15343:2007 BS EN 15343:2007. Plastics. Recycled plastics. Plastics recycling traceability and assessment of conformity and recycled content
BS EN 15344:2007 BS EN 15344:2007. Plastics. Recycled plastics. Characterization of polyethylene (PE) recyclates
BS EN 15345:2007 BS EN 15345:2007. Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates
BS EN 15346:2007 BS EN 15346:2007. Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates
BS EN 15348:2007 BS EN 15348:2007. Plastics. Recycled plastics. Characterization of poly(ethylene terephthalate) (PET) recyclates
BS EN 15342:2007 BS EN 15342:2007. Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates
BS EN 15347:2007 BS EN 15347:2007. Plastics. Recycled Plastics. Characterization of plastics waste
BS ISO 23714:2007 BS ISO 23714:2007. Pulps. Determination of water retention value (WRV)
BS EN 60730-2-11:2008 BS EN 60730-2-11:2008. Automatic electrical controls for household and similar use. Particular requirements for energy regulators
BS ISO 13344:2004 BS ISO 13344:2004. Estimation of the lethal toxic potency of fire effluents
BS ISO 16232-5:2007 BS ISO 16232-5:2007. Road vehicles. Cleanliness of components of fluid circuits. Method of extraction of contaminants on functional test bench
BS ISO 14999-4:2007 BS ISO 14999-4:2007. Optics and photonics. Interferometric measurement of optical elements and optical systems. Interpretation and evaluation of tolerances specified in ISO 10110
BS ISO 16232-8:2007 BS ISO 16232-8:2007. Road vehicles. Cleanliness of components of fluid circuits. Particle nature determination by microscopic analysis
BS ISO 16232-10:2007 BS ISO 16232-10:2007. Road vehicles. Cleanliness of components of fluid circuits. Expression of results
BS ISO 21018-1:2008 BS ISO 21018-1:2008. Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid. General principles
BS ISO 21018-3:2008 BS ISO 21018-3:2008. Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid. Use of the filter blockage technique
BS EN 14566:2008 BS EN 14566:2008. Mechanical fasteners for gypsum plasterboard systems. Definitions, requirements and test methods
BS EN 13434:2006 BS EN 13434:2006. Devices to prevent pollution by backflow of potable water. Mechanical disconnector, hydraulic actuated. Family G, type B
BS EN 13433:2007 BS EN 13433:2007. Devices to prevent pollution by backflow of potable water. Mechanical disconnector, direct actuated. Family G, type A
PD ISO/TR 22335:2007 PD ISO/TR 22335:2007. Surface chemical analysis. Depth profiling. Measurement of sputtering rate. Mesh-replica method using a mechanical stylus profilometer
BS EN 131-1:2007 BS EN 131-1:2007. Ladders. Terms, types, functional sizes
BS EN 131-4:2007 BS EN 131-4:2007. Ladders. Single or multiple hinge-joint ladders
BS ISO 3828:2008 BS ISO 3828:2008. Shipbuilding and marine structures. Deck machinery. Vocabulary and symbols
BS ISO 1704:2008 BS ISO 1704:2008. Ships and marine technology. Stud-link anchor chains
BS EN 14389-1:2007 BS EN 14389-1:2007. Road traffic noise reducing devices. Procedures for assessing long term performance. Acoustical characteristics
BS EN 60745-2-3:2007 BS EN 60745-2-3:2007. Hand-held motor-operated electric tools. Safety. Particular requirements for grinders, polishers and disk-type sanders
BS ISO 17812:2007 BS ISO 17812:2007. Paper, board and pulps. Determination of total magnesium, total calcium, total manganese, total iron and total copper
DD ISO/TS 16976-1:2007 DD ISO/TS 16976-1:2007. Respiratory protective devices. Human factors. Metabolic rates and respiratory flow rates
BS EN ISO 6520-1:2007 BS EN ISO 6520-1:2007. Welding and allied processes. Classification of geometric imperfections in metallic materials. Fusion welding
08/30099661 DC 08/30099661 DC. BS ISO 16900-2. Respiratory protective devices. Methods of test and test equipment. Part 2. Determination of breathing resistance
BS EN 62388:2008 BS EN 62388:2008. Maritime navigation and radiocommunication equipment and systems. Shipborne radar. Performance requirements, methods of testing and required test results
BS ISO 5350-3:2007 BS ISO 5350-3:2007. Pulps. Estimation of dirt and shives. Visual inspection by reflected light using equivalent black area (EBA) method
BS EN 14500:2008 BS EN 14500:2008. Blinds and shutters. Thermal and visual comfort. Test and calculation methods
DD CEN/TS 14754-1:2007 DD CEN/TS 14754-1:2007. Curing compounds. Test methods. Determination of water retention efficiency of common curing compounds
BS ISO/IEC 25020:2007 BS ISO/IEC 25020:2007. Software engineering. Software product quality requirements and evaluation (SQuaRE). Measurement reference model and guide
PD ISO/IEC TR 25021:2007 PD ISO/IEC TR 25021:2007. Software engineering. Software product quality requirements and evaluation (SQuaRE). Quality measure elements
BS ISO/IEC 14143-1:2007 BS ISO/IEC 14143-1:2007. Information technology. Software measurement. Functional size measurement. Definition of concepts
BS EN 61025:2007 BS EN 61025:2007. Fault tree analysis (FTA)
BS EN 61124:2006 BS EN 61124:2006. Reliability testing. Compliance tests for constant failure rate and constant failure intensity
BS EN 61163-1:2006 BS EN 61163-1:2006. Reliability stress screening. Repairable assemblies manufactured in lots
BS EN 61165:2006 BS EN 61165:2006. Application of Markov techniques
BS ISO 3977-3:2004 BS ISO 3977-3:2004. Gas turbines. Procurement. Design requirements
BS ISO 15686-5:2008 BS ISO 15686-5:2008. Buildings and constructed assets. Service life planning. Life cycle costing
BS EN 570:2007 BS EN 570:2007. Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specification
BS EN 363:2008 BS EN 363:2008. Personal fall protection equipment. Personal fall protection systems
BS IEC 62385:2007 BS IEC 62385:2007. Nuclear power plants. Instrumentation and control important to safety. Methods for assessing the performance of safety system instrument channels
BS EN 13035-1:2008 BS EN 13035-1:2008. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Storage, handling and transportation equipment inside the f
BS ISO 8791-4:2007 BS ISO 8791-4:2007. Paper and board. Determination of roughness/smoothness (air leak methods). Print-surf method
BS EN ISO 19493:2007 BS EN ISO 19493:2007. Water quality. Guidance on marine biological surveys of hard-substrate communities
08/30102884 DC 08/30102884 DC. BS ISO 16972. Respiratory protective devices. Terms, definitions, graphical symbols and units of measurement
BS EN ISO 20776-2:2007 BS EN ISO 20776-2:2007. Clinical laboratory testing and in vitro diagnostic test systems. Susceptibility testing of infectious agents and evaluation of performance of antimicrob
08/30103108 DC 08/30103108 DC. BS ISO 13474. Acoustics. Framework for calculating a distribution of sound exposure levels of impulsive sound events for purposes of environmental noise assessment
BS ISO 18512:2007 BS ISO 18512:2007. Soil quality. Guidance on long and short term storage of soil samples
BS ISO 17616:2008 BS ISO 17616:2008. Soil quality. Guidance on the choice and evaluation of bioassays for ecotoxicological characterization of soils and soil materials
BS ISO 18772:2008 BS ISO 18772:2008. Soil quality. Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils and soil materials
BS EN 61995-1:2008 BS EN 61995-1:2008. Devices for the connection of luminaires for household and similar purposes. General requirements
BS ISO 3297:2007 BS ISO 3297:2007. Information and documentation. International standard serial number (ISSN)
BS EN 14829:2007 BS EN 14829:2007. Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW
BS ISO 2469:2007 BS ISO 2469:2007. Paper, board and pulps. Measurement of diffuse radiance factor
BS ISO 22891:2007 BS ISO 22891:2007. Paper. Determination of transmittance by diffuse reflectance measurement
08/30103869 DC 08/30103869 DC. BS ISO 2146. Information and documentation. Registry services for libraries and related organizations
BS ISO 1003:2008 BS ISO 1003:2008. Spices. Ginger (Zingiber officinale Roscoe). Specification
BS EN ISO 16266:2008 BS EN ISO 16266:2008. Water quality. Detection and enumeration of Pseudomonas aeruginosa. Method by membrane filtration
BS ISO 10001:2007 BS ISO 10001:2007. Quality management. Customer satisfaction. Guidelines for codes of conduct for organizations
BS EN 13445-8:2006 BS EN 13445-8:2006. Unfired pressure vessels. Additional requirements for pressure vessels of aluminium and aluminium alloys
BS EN 60730-2-13:2008 BS EN 60730-2-13:2008. Automatic electrical controls for household and similar use. Particular requirements for humidity sensing controls
BS EN 62347:2007 BS EN 62347:2007. Guidance on system dependability specifications
BS EN 351-1:2007 BS EN 351-1:2007. Durability of wood and wood-based products. Preservative-treated solid wood. Classification of preservative penetration and retention
BS ISO 3166-2:2007 BS ISO 3166-2:2007. Codes for the representation of names of countries and their subdivisions. Country subdivision code
PD CISPR/TR 16-4-4:2007 PD CISPR/TR 16-4-4:2007. Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modeling. Statistics of complaint
BS EN ISO 22442-1:2007 BS EN ISO 22442-1:2007. Medical devices utilizing animal tissues and their derivatives. Application of risk management
BS EN ISO 22442-2:2007 BS EN ISO 22442-2:2007. Medical devices utilizing animal tissues and their derivatives. Controls on sourcing, collection and handling
BS EN ISO 22442-3:2007 BS EN ISO 22442-3:2007. Medical devices utilizing animal tissues and their derivatives. Validation of the elimination and/or inactivation of viruses and transmissible spongiform
BS EN ISO 8192:2007 BS EN ISO 8192:2007. Water quality. Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation
BS EN ISO 17872:2007 BS EN ISO 17872:2007. Paints and varnishes. Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
ISO/IEC21000-14 : 2007 EDTN1 ISO/IEC21000-14 : 2007 EDTN1. ISO/IEC21000 : 2007 Information technology - Multimedia Framework (MPEG-21). Part 14:Conformance testing
BS EN 61300-2-22:2007 BS EN 61300-2-22:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Change of temperature
BS ISO 17792:2006 BS ISO 17792:2006. Milk, milk products and mesophilic starter cultures. Enumeration of citrate-fermenting lactic acid bacteria. Colony-count technique at 25°C
BS EN ISO 11608-4:2007 BS EN ISO 11608-4:2007. Pen-injectors for medical use. Requirements and test methods for electronic and electromechanical pen-injectors
08/30107200 DC 08/30107200 DC. BS ISO 10241-1. Terminological entries in standards. Part 1. General requirements and examples of presentation
BS ISO 639-5:2008 BS ISO 639-5:2008. Codes for the representation of names of languages. Alpha-3 code for language families and groups
08/30107258 DC 08/30107258 DC. BS ISO 24611. Language resource management. Morpho-syntactic annotation framework
BS ISO/IEC 19794-7:2007 BS ISO/IEC 19794-7:2007. Information technology. Biometric data interchange formats. Signature/sign time series data
PD ISO/IEC TR 19795-3:2007 PD ISO/IEC TR 19795-3:2007. Information technology. Biometric performance testing and reporting. Modality-specific testing
BS ISO/IEC 19795-4:2008 BS ISO/IEC 19795-4:2008. Information technology. Biometric performance testing and reporting. Interoperability performance testing
BS ISO/IEC 24713-1:2008 BS ISO/IEC 24713-1:2008. Information technology. Biometric profiles for interoperability and datainterchange. Overview of biometric systems and biometric profiles
BS ISO/IEC 24713-2:2008 BS ISO/IEC 24713-2:2008. Information technology. Biometric profiles for interoperability and data interchange. Physical access control for employees at airports
BS EN 14399-7:2007 BS EN 14399-7:2007. High-strength structural bolting assemblies for preloading. System HR. Countersunk head bolt and nut assemblies
BS EN 14399-8:2007 BS EN 14399-8:2007. High-strength structural bolting assemblies for preloading. System HV. Hexagon fit bolts and nut assemblies
BS EN 62353:2008 BS EN 62353:2008. Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment
BS ISO/IEC 14888-1:2008 BS ISO/IEC 14888-1:2008. Information technology. Security techniques. Digital signatures with appendix. General
BS ISO/IEC 14888-2:2008 BS ISO/IEC 14888-2:2008. Information technology. Security techniques. Digital signatures with appendix. Integer factorization based mechanisms
BS EN 61968-4:2007 BS EN 61968-4:2007. Application integration at electric utilities. System interfaces for distribution management. Interfaces for records and asset management
BS EN ISO 20815:2008 BS EN ISO 20815:2008. Petroleum, petrochemical and natural gas industries. Production assurance and reliability management
BS ISO 21349:2007 BS ISO 21349:2007. Space systems. Project reviews
BS EN 54-16:2008 BS EN 54-16:2008. Fire detection and fire alarm systems. Voice alarm control and indicating equipment
BS EN ISO 15181-3:2007, BS 3900-K3:2007 BS EN ISO 15181-3:2007, BS 3900-K3:2007. Paints and varnishes. Determination of release rate of biocides from antifouling paints. Calculation of the zinc ethyle
BS EN ISO 11499:2007 BS EN ISO 11499:2007. Dentistry. Single-use cartridges for local anaesthetics
BS EN ISO 13295:2007 BS EN ISO 13295:2007. Dentistry. Mandrels for rotary instruments
BS EN 60068-3-11:2007 BS EN 60068-3-11:2007. Environmental testing. Supporting documentation and guidance. Calculation of uncertainty of conditions in climatic test chambers
BS ISO 3976:2006 BS ISO 3976:2006. Milk fat. Determination of peroxide value
BS EN 1845:2007 BS EN 1845:2007. Footwear manufacturing machines. Footwear moulding machines. Safety requirements
BS EN 13858:2006 BS EN 13858:2006. Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components
08/30110642 DC 08/30110642 DC. BS EN 1071-12. Advanced technical ceramics. Methods of test for ceramic coatings. Part 12. Reciprocating wear test
BS EN ISO 3630-1:2008 BS EN ISO 3630-1:2008. Dentistry. Root-canal instruments. General requirements and test methods
BS ISO 18517:2005 BS ISO 18517:2005. Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide
BS EN 61300-2-49:2007 BS EN 61300-2-49:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Connector installation test
BS EN 61300-2-50:2007 BS EN 61300-2-50:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Fibre optic connector proof test with static load
BS EN 61300-2-51:2007 BS EN 61300-2-51:2007. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Fibre optic connector test for transmission with
BS EN 88-1:2007 BS EN 88-1:2007. Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures up to and including 500 mbar
BS EN 88-2:2007 BS EN 88-2:2007. Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
08/30111284 DC 08/30111284 DC. BS IEC 62376. Maritime navigation and radiocommunication equipment and systems. Electronic chart system (ECS). Operational and performance requirements, methods of testi
BS ISO 17714:2007 BS ISO 17714:2007. Meteorology. Air temperature measurements. Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
BS ISO 11475:2007 BS ISO 11475:2007. Paper and board. Determination of CIE whiteness, D65/10° (outdoor daylight)
BS EN 14910:2007 BS EN 14910:2007. Garden equipment. Walk-behind combustion engine powered trimmers. Safety
BS EN 14909:2006 BS EN 14909:2006. Flexible sheets for waterproofing. Plastic and rubber damp proof courses. Definitions and characteristics
BS EN 60664-1:2007 BS EN 60664-1:2007. Insulation coordination for equipment within low-voltage systems. Principles, requirements and tests
BS ISO 4409:2007 BS ISO 4409:2007. Hydraulic fluid power. Positive-displacement pumps, motors and integral transmissions. Methods of testing and presenting basic steady state performance
BS ISO 3070-1:2007 BS ISO 3070-1:2007. Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindle. Machines with fixed column and movable table
BS ISO 3070-2:2007 BS ISO 3070-2:2007. Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindle. Machines with movable column and fixed table
BS ISO 3070-3:2007 BS ISO 3070-3:2007. Machine tools. Test conditions for testing the accuracy of boring and milling machines with horizontal spindle. Machines with movable column and movable table
BS EN 60312:2008 BS EN 60312:2008. Vacuum cleaners for household use. Methods of measuring the performance
BS ISO 11568-4:2007 BS ISO 11568-4:2007. Banking. Key management (retail). Asymmetric cryptosystems. Key management and life cycle
BS ISO 21771:2007 BS ISO 21771:2007. Gears. Cylindrical involute gears and gear pairs. Concepts and geometry
BS EN 60079-29-1:2007 BS EN 60079-29-1:2007. Explosive atmospheres. Gas detectors. Performance requirements of detectors for flammable gases
BS EN 60079-29-2:2007 BS EN 60079-29-2:2007. Explosive atmospheres. Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen
BS EN 13035-2:2008 BS EN 13035-2:2008. Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Storage, handling and transportation equipment outside the
BS EN 62366:2008 BS EN 62366:2008. Medical devices. Application of usability engineering to medical devices
BS ISO 20473:2007 BS ISO 20473:2007. Optics and photonics. Spectral bands
BS EN 60034-2-1:2007 BS EN 60034-2-1:2007. Rotating electrical machines. Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
BS EN 62320-2:2008 BS EN 62320-2:2008. Maritime navigation and radiocommunication equipment and systems. Automatic identification system (AIS). AIS AtoN Stations. Operational and performance requireme
BS IEC 60747-9:2007 BS IEC 60747-9:2007. Semiconductor devices. Discrete devices. Insulated-gate bipolar transistors (IGBTs)
BS 6472-2:2008 BS 6472-2:2008. Guide to evaluation of human exposure to vibration in buildings. Blast-induced vibration
BS EN 14930:2007 BS EN 14930:2007. Agricultural and forestry machinery and gardening equipment. Pedestrian controlled and hand-held machines. Determination of accessibility of hot surfaces
BS EN 14933:2007 BS EN 14933:2007. Thermal insulation and light weight fill products for civil engineering applications. Factory made products of expanded polystyrene (EPS). Specification
BS EN 14934:2007 BS EN 14934:2007. Thermal insulation and light weight fill products for civil engineering applications. Factory made products of extruded polystyrene foam (XPS). Specification
BS EN 60079-19:2007 BS EN 60079-19:2007. Explosive atmospheres. Equipment repair, overhaul and reclamation
BS ISO 4666-4:2007 BS ISO 4666-4:2007. Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Constant-stress flexometer
BS EN ISO 8330:2008 BS EN ISO 8330:2008. Rubber and plastics hoses and hose assemblies. Vocabulary
BS ISO/IEC 15944-5:2008 BS ISO/IEC 15944-5:2008. Information technology. Business Operational View. Identification and referencing of requirements of jurisdictional domains as sources of external cons
BS EN ISO 10440-1:2007 BS EN ISO 10440-1:2007. Petroleum, petrochemical and natural gas industries. Rotary-type positive-displacement compressors. Process compressors
BS EN ISO 16000-7:2007 BS EN ISO 16000-7:2007. Indoor air. Sampling strategy for determination of airborne asbestos fibre concentrations
BS EN 13480-8:2007 BS EN 13480-8:2007. Metallic industrial piping. Additional requirements for aluminium and aluminium alloy piping
BS EN 50410:2008 BS EN 50410:2008. Household and similar electrical appliances. Safety. Particular requirements for decorative robots
BS EN 60745-2-13:2007 BS EN 60745-2-13:2007. Hand-held motor-operated electric tools. Safety. Particular requirements for chain saws.
BS EN 15304:2007 BS EN 15304:2007. Determination of the freeze-thaw resistance of autoclaved aerated concrete
BS EN 573-5:2007 BS EN 573-5:2007. Aluminium and aluminium alloys. Chemical composition and form of wrought products. Codification of standardized wrought products
ISO3941 : 2007 EDTN2 ISO3941 : 2007 EDTN2. ISO3941 : 2007 Classification of fires
BS EN 60601-1-9:2008 BS EN 60601-1-9:2008. Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Requirements for environmentally consciou
BS EN 14989-1:2007 BS EN 14989-1:2007. Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications. Vertical air/flue termi
BS ISO 23935:2006 BS ISO 23935:2006. Aircraft. Environmental test procedures for airborne fluid system components. Resistance to fire in designated fire zones
DD CEN/TS 13149-3:2007 DD CEN/TS 13149-3:2007. Public transport. Road vehicle scheduling and control systems. WorldFIP message content
BS ISO 21308-3:2007 BS ISO 21308-3:2007. Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP). General, mass and administrative exchange parameters
BS ISO 16653-1:2008 BS ISO 16653-1:2008. Mobile elevating work platforms. Design, calculations, safety requirements and test methods relative to special features. MEWPs with retractable guardrail syst
BS ISO 1103:2007 BS ISO 1103:2007. Road vehicles. Coupling balls for caravans and light trailers. Dimensions
BS EN 61689:2007 BS EN 61689:2007. Ultrasonics. Physiotherapy systems. Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz
BS ISO 14697:2007 BS ISO 14697:2007. Reaction-to-fire tests. Guidance on the choice of substrates for building and transport products
08/30116059 DC 08/30116059 DC. BS ISO 14155. Clinical investigation of medical devices for human subjects. Good clinical practice
BS EN 60974-10:2007 BS EN 60974-10:2007. Arc welding equipment. Electromagnetic compatibility (EMC) requirements
BS EN ISO 15614-3:2008 BS EN ISO 15614-3:2008. Specification and qualification of welding procedures for metallic materials. Welding procedure test. Fusion welding of non-alloyed and low-alloyed cast
BS EN ISO 15614-7:2007 BS EN ISO 15614-7:2007. Specification and qualification of welding procedures for metallic materials. Welding procedure test. Overlay welding
BS ISO 7975:2006 BS ISO 7975:2006. Passenger cars. Braking in a turn. Open-loop test method
ISO/IECTR24731-1 : 2007 EDTN1 ISO/IECTR24731-1 : 2007 EDTN1. ISO/IEC/TR24731 : 2007 Information technology. Programming languages, their environments and system software interfaces. Extensions to the
BS EN ISO 10438-1:2007 BS EN ISO 10438-1:2007. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. General requirements
BS EN ISO 10438-2:2007 BS EN ISO 10438-2:2007. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. Special-purpose oil systems
BS EN ISO 10438-3:2007 BS EN ISO 10438-3:2007. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. General-purpose oil systems
BS EN ISO 10438-4:2007 BS EN ISO 10438-4:2007. Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries. Self-acting gas seal support sys
BS EN ISO 389-6:2007 BS EN ISO 389-6:2007. Acoustics. Reference zero for the calibration of audiometric equipment. Reference threshold of hearing for test signals of short duration
BS ISO 10835:2007 BS ISO 10835:2007. Direct reduced iron and hot briquetted iron. Sampling and sample preparation
BS EN 13040:2007 BS EN 13040:2007. Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted
BS EN 60645-3:2007 BS EN 60645-3:2007. Electroacoustics. Audiometric equipment. Test signals of short duration
BS EN 14892:2005 BS EN 14892:2005. Transport service. City logistics. Guideline for the definition of limited access to city centres
BS EN 60079-2:2007 BS EN 60079-2:2007. Explosive atmospheres. Equipment protection by pressurized enclosure "p"
BS ISO/IEC 27005:2008 BS ISO/IEC 27005:2008. Information technology. Security techniques. Information security risk management
BS ISO 14397-1:2007 BS ISO 14397-1:2007. Earth-moving machinery. Loaders and backhoe loaders. Calculation of rated operating capacity and test method for verifying calculated tipping load
BS ISO 14397-2:2007 BS ISO 14397-2:2007. Earth-moving machinery. Loaders and backhoe loaders. Test method for measuring breakout forces and lift capacity to maximum lift height
BS EN 54-24:2008 BS EN 54-24:2008. Fire detection and fire alarm systems. Components of voice alarm systems. Loudspeakers
BS EN 54-25:2008 BS EN 54-25:2008. Fire detection and fire alarm systems. Components using radio links
BS EN 725-5:2007 BS EN 725-5:2007. Advanced technical ceramics. Methods of test for ceramic powders. Determination of particle size distribution
BS EN 725-1:2007 BS EN 725-1:2007. Advanced technical ceramics. Methods of test for ceramic powders. Determination of impurities in alumina
BS EN 725-10:2007 BS EN 725-10:2007. Advanced technical ceramics. Methods of test for ceramic powders. Determination of compaction properties
BS EN 3840:2007 BS EN 3840:2007. Aerospace series. Paints and varnishes. Technical specification
BS EN ISO 14121-1:2007 BS EN ISO 14121-1:2007. Safety of machinery. Risk assessment. Principles
BS ISO 3739-1:2007 BS ISO 3739-1:2007. Industrial tyres and rims. Pneumatic tyres (metric series) on 5° tapered on flat base rims. Designation, dimensions and marking
BS ISO 3739-3:2008 BS ISO 3739-3:2008. Industrial tyres and rims. Rims
BS EN 50438:2007 BS EN 50438:2007. Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks
DD CEN ISO/TS 22475-2:2006 DD CEN ISO/TS 22475-2:2006. Geotechnical investigation and testing. Sampling methods and groundwater measurements. Qualification criteria for enterprises and personnel
DD CEN ISO/TS 22475-3:2007 DD CEN ISO/TS 22475-3:2007. Geotechnical investigation and testing. Sampling methods and groundwater measurements. Conformity assessment of enterprises and personnel by thir
BS ISO 16840-2:2007 BS ISO 16840-2:2007. Wheelchair seating. Determination of physical and mechanical characteristics of devices intended to manage tissue integrity. Seat cushions
BS ISO 15529:2007 BS ISO 15529:2007. Optics and photonics. Optical transfer function. Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
BS ISO 21013-2:2007 BS ISO 21013-2:2007. Cryogenic vessels. Pressure-relief accessories for cryogenic service. Non-reclosable pressure-relief devices
BS ISO 21013-1:2008 BS ISO 21013-1:2008. Cryogenic vessels. Pressure-relief accessories for cryogenic service. Reclosable pressure-relief valves
BS IEC 60747-4:2007 BS IEC 60747-4:2007. Semiconductor devices. Discrete devices. Microwave diodes and transistors
BS EN ISO 11079:2007 BS EN ISO 11079:2007. Ergonomics of the thermal environment. Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effec
BS ISO 6281:2007 BS ISO 6281:2007. Plain bearings. Testing under conditions of hydrodynamic and mixed lubrication in test rigs
BS EN 15012:2007 BS EN 15012:2007. Plastics piping systems. Soil and waste discharge systems within the building structure. Performance characteristics for pipes, fittings and their joints
BS EN 61300-3-42:2008 BS EN 61300-3-42:2008. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Attenuation of single mod
BS EN 15014:2007 BS EN 15014:2007. Plastics piping systems. Buried and above ground systems for water and other fluids under pressure. Performance characteristics for pipes, fittings and their joints
BS EN 15015:2007 BS EN 15015:2007. Plastics piping systems. Systems for hot and cold water not intended for human consumption. Performance characteristics for pipes, fittings and their joints
BS EN 61098:2007 BS EN 61098:2007. Radiation protection instrumentation. Installed personnel surface contamination monitoring assemblies
BS IEC 62363:2008 BS IEC 62363:2008. Radiation protection instrumentation. Portable photon contamination meters and monitors
BS ISO 16792:2006 BS ISO 16792:2006. Technical product documentation. Digital product definition data practices
08/30121749 DC 08/30121749 DC. BS ISO/IEC 19757-1. Information technology. Document Schema Definition Languages (DSDL). Part 1. Overview
BS EN 1470:2008 BS EN 1470:2008. Textile floor coverings. Classification of needled floor coverings except for needled pile floor coverings
08/30121783 DC 08/30121783 DC. BS ISO/IEC 19757-7. Document Schema Definition Languages (DSDL). Part 7. Character Repertoire Description Language
08/30121799 DC 08/30121799 DC. BS ISO/IEC 18048. Information technology. Topic maps. Query Language (TMQL)
08/30121802 DC 08/30121802 DC. BS ISO/IEC 19756. Information technology. Topic maps. Constraint Language (TMCL)
DD CEN/TS 1591-3:2007 DD CEN/TS 1591-3:2007. Flanges and their joints. Design rules for gasketed circular flange connections. Calculation method for metal to metal contact type flanged joint
BS ISO 17412:2007 BS ISO 17412:2007. Oil of bitter fennel (Foeniculum vulgare Mill. ssp. vulgare var. vulgare)
BS EN 14989-2:2007 BS EN 14989-2:2007. Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications. Flue and air supply duc
BS EN 15495:2007 BS EN 15495:2007. Non-destructive testing. Acoustic emission. Examination of metallic pressure equipment during proof testing. Zone location of AE sources
BS EN 980:2008 BS EN 980:2008. Symbols for use in the labelling of medical devices
BS ISO 12642-2:2006 BS ISO 12642-2:2006. Graphic technology. Input data for characterization of 4-colour process printing. Expanded data set
BS EN ISO 15181-5:2008, BS 3900-K5:2008 BS EN ISO 15181-5:2008, BS 3900-K5:2008. Paints and varnishes. Determination of release rate of biocides from antifouling paints. Calculation of the tolylfluani
BS EN 15460:2007 BS EN 15460:2007. Water quality. Guidance standard for the surveying of macrophytes in lakes
BS EN 62282-6-200:2008 BS EN 62282-6-200:2008. Fuel cell technologies. Micro fuel cell power systems. Performance test methods
BS EN 15037-1:2008 BS EN 15037-1:2008. Precast concrete products. Beam-and-block floor systems. Beams
BS EN 60584-3:2008 BS EN 60584-3:2008. Thermocouples. Extension and compensating cables. Tolerances and identification system
BS EN 60793-1-42:2007 BS EN 60793-1-42:2007. Optical fibres. Measurement methods and test procedures. Chromatic dispersion
BS ISO 4992-1:2006 BS ISO 4992-1:2006. Steel castings. Ultrasonic examination. Steel castings for general purposes
BS EN 1041:2008 BS EN 1041:2008. Information supplied by the manufacturer of medical devices
BS EN 61188-5-5:2007 BS EN 61188-5-5:2007. Printed boards and printed board assemblies. Design and use. Attachment (land/joint) considerations. Components with gull- wing leads on four sides
PD 6609:2007 PD 6609:2007. Environmental cleanliness in enclosed spaces. Guide to in situ high efficiency filter leak testing
BS EN 1330-11:2007 BS EN 1330-11:2007. Non-destructive testing. Terminology. Terms used in X-ray diffraction from polycrystalline and amorphous materials
BS EN 60079-1:2007 BS EN 60079-1:2007. Explosive atmospheres. Equipment protection by flameproof enclosures "d"
BS EN ISO 748:2007 BS EN ISO 748:2007. Hydrometry. Measurement of liquid flow in open channels using current-meters or floats
BS EN 15050:2007 BS EN 15050:2007. Precast concrete products. Bridge elements
BS EN 15048-1:2007 BS EN 15048-1:2007. Non-preloaded structural bolting assemblies. General requirements
08/30123706 DC 08/30123706 DC. ISO 22282-1. Geotechnical investigation and testing. Geohydraulic testing. Part 1. General rules
08/30123709 DC 08/30123709 DC. ISO 22282-2. Geotechnical investigation and testing. Geohydraulic testing. Part 2. Water permeability tests in a borehole
BS EN 15048-2:2007 BS EN 15048-2:2007. Non-preloaded structural bolting assemblies. Suitability test
BS EN 62402:2007 BS EN 62402:2007. Obsolescence management. Application guide
BS EN 60086-4:2007 BS EN 60086-4:2007. Primary batteries. Safety of lithium batteries
BS EN 15026:2007 BS EN 15026:2007. Hygrothermal performance of building components and building elements. Assessment of moisture transfer by numerical simulation
BS EN 61300-2-26:2007 BS EN 61300-2-26:2007. Fibre optic interconnecting devices and passive Components. Basic test and measurement procedures. Tests. Salt mist
BS EN ISO 21549-7:2007 BS EN ISO 21549-7:2007. Health informatics. Patient healthcard data. Medication data
BS EN 415-8:2008 BS EN 415-8:2008. Safety of packaging machines. Strapping machines
BS EN 15067:2007 BS EN 15067:2007. Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements
BS EN 15193:2007 BS EN 15193:2007. Energy performance of buildings. Energy requirements for lighting
ISO7001 : 2007 EDTN3 ISO7001 : 2007 EDTN3. ISO7001 : 2007 Graphical symbols - Public information symbols
BS EN 60706-5:2007 BS EN 60706-5:2007. Maintainability of equipment. Testability and diagnostic testing
BS EN 15081:2007 BS EN 15081:2007. Industrial valves. Mounting kits for part-turn valve actuator attachment
BS EN 15049:2007 BS EN 15049:2007. Railway applications. Suspension components. Torsion bar, steel
BS EN 13032-3:2007 BS EN 13032-3:2007. Measurement and presentation of photometric data of lamps and luminaires. Presentation of data for emergency lighting of work places
BS EN 15069:2008 BS EN 15069:2008. Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
BS EN 61223-2-6:2007 BS EN 61223-2-6:2007. Evaluation and routine testing in medical imaging departments. Constancy tests. Imaging performance of computed tomography X-ray equipment
BS EN 14678-2:2007 BS EN 14678-2:2007. LPG equipment and accessories. Equipment for liquefied petroleum gas automotive filling stations. Components other than dispensers, and installation requirements
BS ISO 19973-1:2007 BS ISO 19973-1:2007. Pneumatic fluid power - Assessment of component reliability by testing. General procedures
BS ISO 19973-2:2007 BS ISO 19973-2:2007. Pneumatic fluid power. Assessment of component reliability by testing. Directional control valves
BS ISO 19973-3:2007 BS ISO 19973-3:2007. Pneumatic fluid power. Assessment of component reliability by testing. Cylinders with piston rod
BS ISO 16000-8:2007 BS ISO 16000-8:2007. Indoor air. Determination of local mean ages of air in buildings for characterizing ventilation conditions
BS ISO 10770-3:2007 BS ISO 10770-3:2007. Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for pressure control valves
BS EN 10111:2008 BS EN 10111:2008. Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions
BS EN 61557-3:2007 BS EN 61557-3:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Lo
BS EN 61557-6:2007 BS EN 61557-6:2007. Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures.
BS EN 61557-8:2007 BS EN 61557-8:2007. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. In
BS EN 15085-1:2007 BS EN 15085-1:2007. Railway applications. Welding of railway vehicles and components. General
BS EN 15085-2:2007 BS EN 15085-2:2007. Railway applications. Welding of railway vehicles and components. Quality requirements and certification of welding manufacturer
BS EN 15085-3:2007 BS EN 15085-3:2007. Railway applications. Welding of railway vehicles and components. Design requirements
BS EN 15085-4:2007 BS EN 15085-4:2007. Railway applications. Welding of railway vehicles and components. Production requirements
BS EN 15085-5:2007 BS EN 15085-5:2007. Railway applications. Welding of railway vehicles and components. Inspection, testing and documentation
BS EN ISO 9920:2007 BS EN ISO 9920:2007. Ergonomics of the thermal environment. Estimation of thermal insulation and water vapour resistance of a clothing ensemble
BS EN ISO 15236-3:2007 BS EN ISO 15236-3:2007. Steel cord conveyor belts. Special safety requirements for belts for use in underground installations
DD ISO/TS 24534-1:2007 DD ISO/TS 24534-1:2007. Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Architecture
DD ISO/TS 24534-2:2007 DD ISO/TS 24534-2:2007. Automatic vehicle and equipment identification. Electronic Registration Identification (ERI) for vehicles. Operational requirements
DD CEN ISO/TS 24534-3:2008 DD CEN ISO/TS 24534-3:2008. Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Vehicle data
DD CEN ISO/TS 24534-4:2008 DD CEN ISO/TS 24534-4:2008. Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Secure communications using asymmetric
PD ISO/TR 22979:2006 PD ISO/TR 22979:2006. Ophthalmic implants. Intraocular lenses. Guidance on assessment of the need for clinical investigation of intraocular lens design modifications
BS EN 61274-1:2008 BS EN 61274-1:2008. Adaptors for fibre optic connectors. Generic specification
BS ISO 10081-4:2007 BS ISO 10081-4:2007. Classification of dense shaped refractory products. Special products
BS 5702-2:2008 BS 5702-2:2008. Guide to statistical process control (SPC) charts for variables. Charts for individual values
BS EN 1568-1:2008 BS EN 1568-1:2008. Fire extinguishing media. Foam concentrates. Specification for medium expansion foam concentrates for surface application to water-immiscible liquids
BS EN 1568-2:2008 BS EN 1568-2:2008. Fire extinguishing media. Foam concentrates. Specification for high expansion foam concentrates for surface application to water-immiscible liquids
BS EN 1568-3:2008 BS EN 1568-3:2008. Fire extinguishing media. Foam concentrates. Specification for low expansion foam concentrates for surface application to water-immiscible liquids
BS EN 1568-4:2008 BS EN 1568-4:2008. Fire extinguishing media. Foam concentrates. Specification for low expansion foam concentrates for surface application to water-miscible liquids
DD CEN/TS 14822-4:2005 DD CEN/TS 14822-4:2005. Health informatics. General purpose information components. Message headers
BS EN 15102:2007 BS EN 15102:2007. Decorative wallcoverings. Roll and panel form products
BS EN 15099-1:2007 BS EN 15099-1:2007. Irrigation techniques. Remote monitoring and control for irrigation systems. General considerations
ISO/IEC18056 : 2007 EDTN3 ISO/IEC18056 : 2007 EDTN3. ISO/IEC18056 : 2007 Information technology - Telecommunications and information exchange between systems - XML Protocol for Computer Supported Tele
BS EN ISO 8308:2008 BS EN ISO 8308:2008. Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing walls
BS EN ISO 7326:2008 BS EN ISO 7326:2008. Rubber and plastics hoses. Assessment of ozone resistance under static conditions
BS ISO 81400-4:2005 BS ISO 81400-4:2005. Wind turbines. Design and specification of gearboxes
08/30126370 DC 08/30126370 DC. BS ISO 80000-1. Quantities and units. Part 1. General
08/30126378 DC 08/30126378 DC. BS ISO 80000-2. Quantities and units. Part 2. Mathematical signs and symbols to be used in the natural sciences and technology
BS ISO 80000-5:2007 BS ISO 80000-5:2007. Quantities and units. Thermodynamics
08/30126399 DC 08/30126399 DC. BS ISO 80000-10. Quantities and units. Part 10. Atomic and nuclear physics
BS EN 60749-38:2008 BS EN 60749-38:2008. Semiconductor devices. Mechanical and climatic test methods. Soft error test method for semiconductor devices with memory
BS EN ISO 20988:2007 BS EN ISO 20988:2007. Air quality. Guidelines for estimating measurement uncertainty
BS EN 1149-5:2008 BS EN 1149-5:2008. Protective clothing. Electrostatic properties. Material performance and design requirements
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
