BIS Standards Catalogue
BS EN 60695-1-30:2008 BS EN 60695-1-30:2008. Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. Preselection testing process. General guidelines
BS EN 15288-1:2008 BS EN 15288-1:2008. Swimming pools. Safety requirements for design
BS EN ISO 945-1:2008 BS EN ISO 945-1:2008. Microstructure of cast irons. Graphite classification by visual analysis
BS EN 61996-1:2008 BS EN 61996-1:2008. Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR). Voyage data recorder (VDR). Performance requirements, met
BS ISO/IEC 15946-1:2008 BS ISO/IEC 15946-1:2008. Information technology. Security techniques. Cryptographic techniques based on elliptic curves. General
BS EN 62220-1-3:2008 BS EN 62220-1-3:2008. Medical electrical equipment. Characteristics of digital X-ray imaging devices. Determination of the detective quantum efficiency. Detectors used in dynamic
BS EN 12517-2:2008 BS EN 12517-2:2008. Non-destructive testing of welds. Evaluation of welded joints in aluminium and its alloys by radiography. Acceptance levels
BS EN 15268:2008 BS EN 15268:2008. Petrol filling stations. Safety requirements for the construction of submersible pump assemblies
BS EN 15527:2008 BS EN 15527:2008. Characterization of waste. Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS)
08/30135161 DC 08/30135161 DC. BS ISO/IEC 18014-2. Information technology. Security techniques. Time-stamping services. Part 2. Mechanisms producing independent tokens
BS ISO/IEC 18014-1:2008 BS ISO/IEC 18014-1:2008. Information technology. Security techniques. Time- stamping services. Framework
BS ISO 22010:2007 BS ISO 22010:2007. Space systems. Mass properties control
08/30135059 DC 08/30135059 DC. BS ISO/IEC 9797-2. Information technology. Security techniques. Message authentication codes (MACs). Part 2. Mechanisms using a dedicated hash-function
BS EN ISO 148-2:2008 BS EN ISO 148-2:2008. Metallic materials. Charpy pendulum impact test. Verification of testing machines
BS EN ISO 148-3:2008 BS EN ISO 148-3:2008. Metallic materials. Charpy pendulum impact test. Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact
BS EN ISO 14607:2007 BS EN ISO 14607:2007. Non-active surgical implants. Mammary implants. Particular requirements
BS EN ISO 7197:2006 BS EN ISO 7197:2006. Neurosurgical implants. Sterile, single-use hydrocephalus shunts and components
BS EN 60335-2-108:2008 BS EN 60335-2-108:2008. Household and similar electrical appliances. Safety. Particular requirements for electrolysers
BS EN ISO 10456:2007 BS EN ISO 10456:2007. Building materials and products. Hygrothermal properties. Tabulated design values and procedures for determining declared and design thermal values
BS ISO 25101:2009 BS ISO 25101:2009. Water quality. Determination of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA). Method for unfiltered samples using solid phase extraction and liqui
BS EN ISO 12718:2008 BS EN ISO 12718:2008. Non-destructive testing. Eddy current testing. Vocabulary
BS ISO 21278-1:2008 BS ISO 21278-1:2008. Equipment for crop protection. Induction hoppers. Test methods
BS ISO 22900-2:2009 BS ISO 22900-2:2009. Road vehicles. Modular vehicle communication interface (MVCI). Diagnostic protocol data unit application programming interface (D-PDU API)
BS EN 15227:2008 BS EN 15227:2008. Railway applications. Crashworthiness requirements for railway vehicle bodies
BS ISO 22915-10:2008 BS ISO 22915-10:2008. Industrial trucks. Verification of stability. Additional stability test for trucks operating in the special condition of stacking with load laterally displac
BS ISO 22915-8:2008 BS ISO 22915-8:2008. Industrial trucks. Verification of stability. Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and
BS EN 60076-6:2008 BS EN 60076-6:2008. Power transformers. Reactors
BS EN ISO 21003-2:2008 BS EN ISO 21003-2:2008. Multilayer piping systems for hot and cold water installations inside buildings. Pipes
BS EN ISO 21003-1:2008 BS EN ISO 21003-1:2008. Multilayer piping systems for hot and cold water installations inside buildings. General
BS EN 1177:2008 BS EN 1177:2008. Impact attenuating playground surfacing. Determination of critical fall height
BS EN 60317-55:2008 BS EN 60317-55:2008. Specifications for particular types of winding wires. Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 180
BS EN ISO 13790:2008 BS EN ISO 13790:2008. Energy performance of buildings. Calculation of energy use for space heating and cooling
BS ISO 22901-1:2008 BS ISO 22901-1:2008. Road vehicles. Open diagnostic data exchange (ODX). Data model specification
ISO18213-3 : 2009 EDTN1 ISO18213-3 : 2009 EDTN1. Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy. Part 3: Statistical methods
08/30133461 DC 08/30133461 DC. BS ISO/IEC 27003. Information technology. Security techniques. Information security management system implementation guidance
BS EN 13071-2:2008 BS EN 13071-2:2008. Stationary waste containers up to 5000 l, top lifted and bottom emptied. Additional requirements for underground or partly underground systems
BS EN 13071-1:2008 BS EN 13071-1:2008. Stationary waste containers up to 5000 l, top lifted and bottom emptied. General requirements
BS ISO 812:2006 BS ISO 812:2006. Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness
BS EN 1090-2:2008 BS EN 1090-2:2008. Execution of steel structures and aluminium structures. Technical requirements for the execution of steel structures
BS ISO 6550-3:2009 BS ISO 6550-3:2009. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M10 glow-plugs
BS EN ISO 15743:2008 BS EN ISO 15743:2008. Ergonomics of the thermal environment. Cold workplaces. Risk assessment and management
DD ISO TS 17837:2008 DD ISO TS 17837:2008. Milk and milk products. Determination of nitrogen content and crude protein calculation. Kjeldahl method
BS EN 15060:2006 BS EN 15060:2006. Paints and varnishes. Guide for the classification and selection of coating systems for wood based materials in furniture for interior use
BS EN 927-6:2006 BS EN 927-6:2006. Paints and varnishes. Coating materials and coating systems for exterior wood. Exposure of wood coatings to artificial weathering using fluorescent UV lamps and wate
BS EN 936:2006 BS EN 936:2006. Chemicals used for treatment of water intended for human consumption. Carbon dioxide
BS ISO 4126-9:2008 BS ISO 4126-9:2008. Safety devices for protection against excessive pressure. Application and installation of safety devices excluding stand-alone bursting disc safety devices
BS ISO 6194-4:2009 BS ISO 6194-4:2009. Rotary shaft lip-type seals incorporating elastomeric sealing elements. Performance test procedures
BS ISO 6194-2:2009 BS ISO 6194-2:2009. Rotary shaft lip-type seals incorporating elastomeric sealing elements. Vocabulary
BS ISO 22434:2006 BS ISO 22434:2006. Transportable gas cylinders. Inspection and maintenance of cylinder valves
BS EN 1019:2005 BS EN 1019:2005. Chemicals used for treatment of water intended for human consumption. Sulfur dioxide
BS EN 15094:2008 BS EN 15094:2008. Safety of machinery. Safety requirements for cold flat rolling mills
BS EN 15093:2008 BS EN 15093:2008. Safety of machinery. Safety requirements for hot flat rolling mills
BS EN 15181:2008 BS EN 15181:2008. Measuring method of the energy consumption of gas fired ovens
BS EN 901:2007 BS EN 901:2007. Chemicals used for treatment of water intended for human consumption. Sodium hypochlorite
BS EN 15078:2006 BS EN 15078:2006. Chemicals used for treatment of swimming pool water. Sulfuric acid
BS EN 15077:2006 BS EN 15077:2006. Chemicals used for treatment of swimming pool water. Sodium hypochlorite
BS EN 15076:2006 BS EN 15076:2006. Chemicals used for treatment of swimming pool water. Sodium hydroxide
BS EN 15075:2006 BS EN 15075:2006. Chemicals used for treatment of swimming pool water. Sodium hydrogen carbonate
BS EN 15074:2006 BS EN 15074:2006. Chemicals used for treatment of swimming pool water. Ozone
BS EN 15427:2008 BS EN 15427:2008. Railway applications. Wheel/rail friction management. Flange lubrication
BS EN 15166:2008 BS EN 15166:2008. Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements
BS ISO 1496-2:2008 BS ISO 1496-2:2008. Series 1 freight containers. Specification and testing. Thermal containers
BS EN ISO 8254-1:2009 BS EN ISO 8254-1:2009. Paper and board. Measurement of specular gloss. 75 degree gloss with a converging beam, TAPPI method
NA to BS EN 1999-1-3:2007 NA to BS EN 1999-1-3:2007. UK National Annex to Eurocode 9. Design of aluminium structures. Structures susceptible to fatigue
NA to BS EN 1999-1-1:2007 NA to BS EN 1999-1-1:2007. UK National Annex to Eurocode 9. Design of aluminium structures. General structural rules
BS EN 61753-084-2:2008 BS EN 61753-084-2:2008. Fibre optic interconnecting devices and passive components performance standard. Non connectorised single-mode 980/1550 nm WWDM devices for category C. C
BS 8521:2009 BS 8521:2009. Specification for dual-tone multi-frequency (DTMF) signalling protocol for social alarm systems
BS ISO 12575-2:2007 BS ISO 12575-2:2007. Thermal insulation products. Exterior insulating systems for foundations. Principal responsibilities of installers
BS EN ISO 9073-9:2008 BS EN ISO 9073-9:2008. Textiles. Test methods for nonwovens. Determination of drapability including drape coefficient
BS ISO 16889:2008 BS ISO 16889:2008. Hydraulic fluid power. Filters. Multi-pass method for evaluating filtration performance of a filter element
BS ISO 9255:2008 BS ISO 9255:2008. Aerospace. Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to
BS ISO 3186:2008 BS ISO 3186:2008. Aerospace. Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 M
BS ISO 13921:2008 BS ISO 13921:2008. Aerospace. Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metal
BS ISO 5857:2008 BS ISO 5857:2008. Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1250 MPa. Procurement specification
BS ISO 5856:2008 BS ISO 5856:2008. Aerospace. Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic
BS ISO 3193:2008 BS ISO 3193:2008. Aerospace. Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal
BS ISO 3185:2008 BS ISO 3185:2008. Aerospace. Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equa
BS ISO 8279:2008 BS ISO 8279:2008. Aerospace. Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient
BS ISO 7689:2008 BS ISO 7689:2008. Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa. Procurement specification
BS ISO 20860-1:2008 BS ISO 20860-1:2008. Road vehicles. 50 ohms impedance radio frequency connection system interface. Dimensions and electrical requirements
BS EN 60318-6:2008 BS EN 60318-6:2008. Electroacoustics. Simulators of human head and ear. Mechanical coupler for the measurement of bone vibrators
BS EN 15041:2006 BS EN 15041:2006. Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Polyphosphates
BS EN 15040:2006 BS EN 15040:2006. Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Phosphonic acids and salts
BS EN 15039:2006 BS EN 15039:2006. Chemicals used for treatment of water intended for human consumption. Antiscalants for membranes. Polycarboxilic acids and salts
BS EN 15031:2006 BS EN 15031:2006. Chemicals used for treatment of swimming pool water. Aluminium based coagulants
BS EN 15030:2006 BS EN 15030:2006. Chemicals used for treatment of water intended for human consumption. Silver salts for the conservation of drinking water for intermittent use
BS EN 15029:2006 BS EN 15029:2006. Products used for treatment of water intended for human consumption. Iron (III) hydroxide oxide
BS EN 15028:2006 BS EN 15028:2006. Chemicals used for treatment of water intended for human consumption. Sodium chlorate
NA to BS EN 1991-1-7:2006 NA to BS EN 1991-1-7:2006. National Annex to Eurocode 1. Actions on structures. Accidental actions
BS ISO 9988-2:2006 BS ISO 9988-2:2006. Plastics. Polyoxymethylene (POM) moulding and extrusion materials. Preparation of test specimens and determination of properties
09/30128274 DC 09/30128274 DC. NA to BS EN 1997-2. UK National Annex to Eurocode 7. Geotechnical design. Part 2. Ground investigation and testing
BS ISO 22493:2008 BS ISO 22493:2008. Microbeam analysis. Scanning electron microscopy. Vocabulary
NA to BS EN 1993-1-11:2006 NA to BS EN 1993-1-11:2006. UK National Annex to Eurocode 3. Design of steel structures. Design of structures with tension components
NA to BS EN 1993-1-10:2005 NA to BS EN 1993-1-10:2005. National Annex (informative) to Eurocode 3. Design of steel structures. Material toughness and through thickness properties
NA to BS EN 1993-1-8:2005 NA to BS EN 1993-1-8:2005. UK National Annex to Eurocode 3. Design of steel structures. Design of joints
NA to BS EN 1993-1-4:2006 NA to BS EN 1993-1-4:2006. UK National Annex to Eurocode 3. Design of steel structures. General rules. Supplementary rules for stainless steels
NA to BS EN 1993-1-3:2006 NA to BS EN 1993-1-3:2006. UK National Annex to Eurocode 3. Design of steel structures. General rules. Supplementary rules for cold-formed members and sheeting
NA to BS EN 1993-1-2:2005 NA to BS EN 1993-1-2:2005. UK National Annex to Eurocode 3. Design of steel structures. General rules. Structural fire design
NA to BS EN 1993-1-1:2005 NA to BS EN 1993-1-1:2005. UK National Annex to Eurocode 3. Design of steel structures. General rules and rules for buildings
08/30128080 DC 08/30128080 DC. BS ISO/IEC 19770-2. Software asset management. Part 2. Software identification tag
ISO22951 : 2009 ED1 ISO22951 : 2009 ED1. Data dictionary and message sets for pre-emption and Prioritization signal systems for emergency and public transport vehicles (PRESTO)
BS EN ISO 15927-6:2007 BS EN ISO 15927-6:2007. Hygrothermal performance of buildings. Calculation and presentation of climatic data. Accumulated temperature differences (degree days)
BS EN ISO 6946:2007 BS EN ISO 6946:2007. Building components and building elements. Thermal resistance and thermal transmittance. Calculation method
BS ISO 15364:2007 BS ISO 15364:2007. Ships and marine technology. Pressure/vacuum valves for cargo tanks
BS ISO 19730:2008 BS ISO 19730:2008. Soil quality. Extraction of trace elements from soil using ammonium nitrate solution
09/30127481 DC 09/30127481 DC. BS ISO 7967-9. Reciprocating internal combustion engines. Vocabulary of components and systems. Part 9. Control and monitoring systems
ISO/IEC24747 : 2009 ED1 ISO/IEC24747 : 2009 ED1. Information technology. Programming languages, their environments and system software interfaces. Extensions to the C Library to support mathematical s
NA to BS EN 1991-1-4:2005 NA to BS EN 1991-1-4:2005. UK National Annex to Eurocode 1. Actions on structures. General actions. Wind actions
BS ISO 80000-11:2008 BS ISO 80000-11:2008. Quantities and units. Characteristic numbers
BS ISO 80000-9:2009 BS ISO 80000-9:2009. Quantities and units. Physical chemistry and molecular physics
BS ISO 80000-7:2008 BS ISO 80000-7:2008. Quantities and units. Light
BS EN 80000-6:2008 BS EN 80000-6:2008. Quantities and units. Electromagnetism
BS ISO 22915-3:2008 BS ISO 22915-3:2008. Industrial trucks. Verification of stability. Reach and straddle trucks
BS ISO 22915-2:2008 BS ISO 22915-2:2008. Industrial trucks. Verification of stability. Counterbalanced trucks with mast
BS ISO 22915-1:2008 BS ISO 22915-1:2008. Industrial trucks. Verification of stability. General
BS EN 10088-5:2009 BS EN 10088-5:2009. Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
BS EN ISO 10407-2:2008 BS EN ISO 10407-2:2008. Petroleum and natural gas industries. Rotary drilling equipment. Inspection and classification of used drill stem elements
BS EN 13082:2008 BS EN 13082:2008. Tanks for transport of dangerous goods. Service equipment for tanks. Vapour transfer valve
BS EN 13081:2008 BS EN 13081:2008. Tanks for transport of dangerous goods. Service equipment for tanks. Vapour collection adaptor and coupler
BS EN ISO 15403-1:2008 BS EN ISO 15403-1:2008. Natural gas. Natural gas for use as a compressed fuel for vehicles. Designation of the quality
BS ISO 21927-1:2008 BS ISO 21927-1:2008. Smoke and heat control systems. Specification for smoke barriers
09/30125465 DC 09/30125465 DC. BS ISO 8769. Reference sources. Calibration of surface contamination monitors. Alpha-, beta- and photon emitters
ISO9278 : 2008 EDTN2 ISO9278 : 2008 EDTN2. ISO9278 : 2008 Nuclear energy - Uranium dioxide pellets - Determination of density and volume fraction of open and closed porosity
BS EN 15609:2008 BS EN 15609:2008. LPG equipment and accessories. LPG propulsion systems for boats, yachts and other craft. Installation requirements
BS EN 61758-1:2008 BS EN 61758-1:2008. Fibre optic interconnecting devices and passive components. Interface standard for closures. General and guidance
BS EN 62343-1-2:2008 BS EN 62343-1-2:2008. Dynamic modules. Performance standards. Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C)
BS EN 61300-3-2:2009 BS EN 61300-3-2:2009. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Polarization dependent loss
BS EN 1094-1:2008 BS EN 1094-1:2008. Insulating refractory products. Terminology, classification and methods of test for high temperature insulation wool products
BS EN 13598-2:2009 BS EN 13598-2:2009. Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE).
PD CEN/TR 15068:2009 PD CEN/TR 15068:2009. Gas welding equipment. Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering. Measurement method
BS EN 50216-10:2009 BS EN 50216-10:2009. Power transformer and reactor fittings. Oil-to-air heat exchangers
BS ISO 6279:2006 BS ISO 6279:2006. Plain bearings. Aluminium alloys for solid bearings
BS IEC 61577-4:2009 BS IEC 61577-4:2009. Radiation protection instrumentation. Radon and radon decay product measuring instruments. Equipment for the production of reference atmospheres containing rad
BS ISO 15112:2007 BS ISO 15112:2007. Natural gas. Energy determination
BS EN 12409:2008 BS EN 12409:2008. Plastics and rubber machines. Thermoforming machines. Safety requirements
BS EN 62369-1:2009 BS EN 62369-1:2009. Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz. Fields
BS EN ISO 15181-4:2008, BS 3900-K4:2008 BS EN ISO 15181-4:2008, BS 3900-K4:2008. Paints and varnishes. Determination of release rate of biocides from antifouling paints. Determination of pyridine-trip
BS EN ISO 10218-1:2006 BS EN ISO 10218-1:2006. Robots for industrial environments. Safety requirements. Robot
BS ISO 15754:2009 BS ISO 15754:2009. Paper and board. Determination of z-directional tensile strength
BS EN ISO 11348-3:2008 BS EN ISO 11348-3:2008. Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using
BS EN ISO 11348-2:2008 BS EN ISO 11348-2:2008. Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using
BS EN ISO 11348-1:2008 BS EN ISO 11348-1:2008. Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Method using
BS EN 13126-10:2008 BS EN 13126-10:2008. Building hardware. Requirements and test methods for windows and doors height windows. Arm-balancing systems
BS ISO/IEC 19757-8:2008 BS ISO/IEC 19757-8:2008. Information technology. Document schema definition languages (DSDL). Document semantics renaming language (DSRL)
08/30121777 DC 08/30121777 DC. BS ISO/IEC 19757-5. Information technology. Document Schema Definition Languages (DSDL). Part 5. Extensible datatypes
BS ISO 21243:2008 BS ISO 21243:2008. Radiation protection. Performance criteria for laboratories performing cytogenetic triage for assessment of mass casualties in radiological or nuclear emergencies.
BS EN 1398:2009 BS EN 1398:2009. Dock levellers. Safety requirements
BS ISO 10129:2006 BS ISO 10129:2006. Plain bearings. Testing of bearing materials. Resistance to corrosion by lubricants under static conditions
BS ISO 21011:2008 BS ISO 21011:2008. Cryogenic vessels. Valves for cryogenic service
BS ISO 21013-3:2006 BS ISO 21013-3:2006. Cryogenic vessels. Pressure-relief accessories for cryogenic service. Sizing and capacity determination
BS EN 61310-3:2008 BS EN 61310-3:2008. Safety of machinery. Indication, marking and actuation. Requirements for the location and operation of actuators
BS EN 61310-2:2008 BS EN 61310-2:2008. Safety of machinery. Indication, marking and actuation. Requirements for marking
BS EN 61310-1:2008 BS EN 61310-1:2008. Safety of machinery. Indication, marking and actuation. Requirements for visual, acoustic and tactile signals
BS EN 725-3:2007 BS EN 725-3:2007. Advanced technical ceramics. Methods of test for ceramic powders. Determination of the oxygen content of nonoxides by thermal extraction with a carrier gas
BS EN 15004-1:2008 BS EN 15004-1:2008. Fixed firefighting systems. Gas extinguishing systems. Design, installation and maintenance
BS EN 15001-2:2008 BS EN 15001-2:2008. Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial
BS EN 15000:2008 BS EN 15000:2008. Safety of industrial trucks. Self propelled variable reach trucks. Specification, performance and test requirements for longitudinal load moment indicators and longi
DD CEN/TS 45545-6:2009 DD CEN/TS 45545-6:2009. Railway applications. Fire protection on railway vehicles. Fire control and management systems
BS ISO 5598:2008 BS ISO 5598:2008. Fluid power systems and components. Vocabulary
BS EN ISO 10350-1:2008 BS EN ISO 10350-1:2008. Plastics. Acquisition and presentation of comparable single-point data. Moulding materials
BS EN ISO 13789:2007 BS EN ISO 13789:2007. Thermal performance of buildings. Transmission and ventilation heat transfer coefficients. Calculation method
BS EN 61326-3-1:2008 BS EN 61326-3-1:2008. Electrical equipment for measurement, control and laboratory use. EMC requirements. Immunity requirements for safety-related systems and for equipment intend
BS EN 80416-1:2009 BS EN 80416-1:2009. Basic principles for graphical symbols for use on equipment. Creation of graphical symbols for registration
BS EN ISO 3826-2:2008 BS EN ISO 3826-2:2008. Plastics collapsible containers for human blood and blood components. Graphical symbols for use on labels and instruction leaflets
BS EN 747-1:2007 BS EN 747-1:2007. Furniture. Bunk beds and high beds for domestic use. Safety, strength and durability requirements
BS EN ISO 23993:2008 BS EN ISO 23993:2008. Thermal insulation products for building equipment and Industrial installations. Determination of design thermal conductivity
BS EN ISO 6872:2008 BS EN ISO 6872:2008. Dentistry. Ceramic materials
ISO/IECTR24732 : 2009 ED1 ISO/IECTR24732 : 2009 ED1. Information technology. Programming languages, their environments and system software interfaces. Extension for the programming language C to suppo
BS EN 747-2:2007 BS EN 747-2:2007. Furniture. Bunk beds and high beds for domestic use. Test methods
BS ISO 21350:2007 BS ISO 21350:2007. Space systems. Off-the-shelf item utilization
BS ISO 5416:2006 BS ISO 5416:2006. Direct reduced iron. Determination of metallic iron. Bromine-methanol titrimetric method
BS EN 61649:2008 BS EN 61649:2008. Weibull analysis
BS EN ISO 9241-300:2008 BS EN ISO 9241-300:2008. Ergonomics of human-system interaction. Introduction to electronic visual display requirements
BS EN 62271-1:2008 BS EN 62271-1:2008. High-voltage switchgear and controlgear. Common specifications
BS EN 81-40:2008 BS EN 81-40:2008. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Stairlifts and inclined lifting platforms intended
BS EN 60137:2008 BS EN 60137:2008. Insulated bushings for alternating voltages above 1000 V
BS EN 61952:2008 BS EN 61952:2008. Insulators for overhead lines. Composite line post insulators for A.C. systems with a nominal voltage greater than 1000 V. Definitions, test methods and acceptance c
BS EN 13245-2:2008 BS EN 13245-2:2008. Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. PVC-U profiles and PVC-UE profiles for internal and external wall and ce
BS ISO 6395:2008 BS ISO 6395:2008. Earth-moving machinery. Determination of sound power level. Dynamic test conditions
BS ISO 6393:2008 BS ISO 6393:2008. Earth-moving machinery. Determination of sound power level noise emissions. Stationary test conditions
BS EN ISO 6802:2008 BS EN ISO 6802:2008. Rubber and plastics hoses and hose assemblies with wire reinforcements. Hydraulic impulse test with flexing
BS EN ISO 4641:2008 BS EN ISO 4641:2008. Rubber hoses and hose assemblies for water suction and discharge. Specification
BS EN 1501-3:2008 BS EN 1501-3:2008. Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements. Front loaded refuse collection vehicles
BS EN 50242:2008, BS EN 60436:2008 BS EN 50242:2008, BS EN 60436:2008. Electric dishwashers for household use. Methods for measuring the performance
BS EN ISO 16634-1:2008 BS EN ISO 16634-1:2008. Food products. Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content. O
PAS 67:2008 PAS 67:2008. Laboratory tests to determine the heating and electrical performance of heat-led micro-cogeneration packages primarily intended for heating dwellings
BS EN 61467:2008 BS EN 61467:2008. Insulators for overhead lines. Insulator strings and sets for lines with a nominal voltage greater than 1000 V. AC power arc tests
BS EN 60904-3:2008 BS EN 60904-3:2008. Photovoltaic devices. Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
BS ISO 9707:2008 BS ISO 9707:2008. Information and documentation. Statistics on the production and distribution of books, newspapers, periodicals and electronic publications
PD ISO/IEC TR 24714-1:2008 PD ISO/IEC TR 24714-1:2008. Information technology. Biometrics. Jurisdictional and societal considerations for commercial applications. General guidance
BS ISO/IEC 24708:2008 BS ISO/IEC 24708:2008. Information technology. Biometrics. BioAPI Interworking Protocol
09/30107264 DC 09/30107264 DC. BS ISO 24612. Language resource management. Linguistic annotation framework (LAF)
BS EN 13718-1:2008 BS EN 13718-1:2008. Medical vehicles and their equipment. Air ambulances. Requirements for medical devices used in air ambulances
BS EN 14805:2008 BS EN 14805:2008. Chemicals used for treatment of water intended for human consumption. Sodium chloride for on site electrochlorination using non-membrane technology
BS EN ISO 2082:2008 BS EN ISO 2082:2008. Metallic coatings. Electroplated coatings of cadmium with supplementary treatments on iron or steel
BS EN ISO 11612:2008 BS EN ISO 11612:2008. Protective clothing. Clothing to protect against heat and flame
BS EN 14846:2008 BS EN 14846:2008. Building hardware. Locks and latches. Electromechanically operated locks and striking plates. Requirements and test methods
BS ISO 19003:2006 BS ISO 19003:2006. Rubber and rubber products. Guidance on the application of statistics to physical testing
BS ISO 21789:2009 BS ISO 21789:2009. Gas turbine applications. Safety
PD CEN/TR 15276-1:2009 PD CEN/TR 15276-1:2009. Fixed firefighting systems. Condensed aerosol extinguishing systems. Requirements and test methods for components
PD CEN/TR 15276-2:2009 PD CEN/TR 15276-2:2009. Fixed firefighting systems. Condensed aerosol extinguishing systems. Design, installation and maintenance
BS EN ISO 10846-2:2008 BS EN ISO 10846-2:2008. Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Direct method for determination of the dynam
BS EN 60730-2-6:2008 BS EN 60730-2-6:2008. Automatic electrical controls for household and similar use. Particular requirements for automatic electrical pressure sensing controls including mechanical
BS EN ISO 2081:2008 BS EN ISO 2081:2008. Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel
BS ISO 7207-1:2007 BS ISO 7207-1:2007. Implants for surgery. Components for partial and total knee joint prostheses. Classification, definitions and designation of dimensions
BS ISO 13356:2008 BS ISO 13356:2008. Implants for surgery. Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
BS EN 61784-3:2008 BS EN 61784-3:2008. Industrial communication networks. Profiles. Functional safety fieldbuses. General rules and profile definitions
BS EN 61784-2:2008 BS EN 61784-2:2008. Industrial communication networks. Profiles. Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3
BS ISO 817:2005 BS ISO 817:2005. Refrigerants. Designation system
BS ISO 17334:2008 BS ISO 17334:2008. Metallic and other inorganic coatings. Autocatalytic nickel over autocatalytic copper for electromagnetic shielding
BS ISO/IEC 19793:2008 BS ISO/IEC 19793:2008. Information technology. Open distributed processing. Use of UML for ODP viewpoint specifications
BS EN 62374:2007 BS EN 62374:2007. Semiconductor devices. Time dependent dielectric breakdown (TDDB) test for gate dielectric films
BS EN 10253-3:2008 BS EN 10253-3:2008. Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
08/30099658 DC 08/30099658 DC. BS ISO 16900-4. Respiratory protective devices. Methods of test and test equipment. Part 4. Determination of gas filter capacity
08/30099655 DC 08/30099655 DC. BS ISO 16900-3. Respiratory protective devices. Methods of test and test equipment. Part 3. Determination of particle filter penetration
08/30099651 DC 08/30099651 DC. BS ISO 16900-1. Respiratory protective devices. Methods of test and test equipment. Part 1. Determination of inward leakage
BS ISO 5832-9:2007 BS ISO 5832-9:2007. Implants for surgery. Metallic materials. Wrought high nitrogen stainless steel
BS ISO 5832-1:2007 BS ISO 5832-1:2007. Implants for surgery. Metallic materials. Wrought stainless steel
BS ISO 16454:2007 BS ISO 16454:2007. Space systems. Structural design. Stress analysis requirements
BS EN ISO 9241-410:2008 BS EN ISO 9241-410:2008. Ergonomics of human-system interaction. Physical input devices. Design criteria for products
ISO17512-1 : 2008 EDTN1 ISO17512-1 : 2008 EDTN1. ISO17512 : 2008 Soil quality - Avoidance test for determining the quality of soils and effects of chemicals on behaviour. Part 1:Test with earthworms (
BS EN ISO 10846-1:2008 BS EN ISO 10846-1:2008. Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Principles and guidelines
BS EN 15381:2008 BS EN 15381:2008. Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays
BS EN ISO 10993-7:2008 BS EN ISO 10993-7:2008. Biological evaluation of medical devices. Ethylene oxide sterilization residuals
BS EN 61076-3-001:2008 BS EN 61076-3-001:2008. Connectors for electronic equipment. Product requirements. Rectangular connectors. Blank detail specification
BS EN 61076-3:2008 BS EN 61076-3:2008. Connectors for electronic equipment. Product requirements. Rectangular connectors. Sectional specification
09/30096507 DC 09/30096507 DC. BS ISO 1143. Metallic materials. Rotating bar bending fatigue testing
BS EN ISO 5263-3:2004 BS EN ISO 5263-3:2004. Pulps. Laboratory wet disintegration. Disintegration of mechanical pulps at greater than or equal to 85 °C
BS EN 45502-2-2:2008 BS EN 45502-2-2:2008. Active implantable medical devices. Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable de
BS EN 417:2003 BS EN 417:2003. Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances. Construction, inspection, testing and ma
BS ISO 16402:2008 BS ISO 16402:2008. Implants for surgery. Acrylic resin cement. Flexural fatigue testing of acrylic resin cements used in orthopaedics
BS ISO 5832-5:2005 BS ISO 5832-5:2005. Implants for surgery. Metallic materials. Wrought cobalt-chromium-tungsten-nickel alloy
BS IEC 60870-5-6:2006 BS IEC 60870-5-6:2006. Telecontrol equipment and systems. Guidelines for conformance testing for the IEC 60870-5 companion standards
BS EN ISO 14116:2008 BS EN ISO 14116:2008. Protective clothing. Protection against heat and flame. Limited flame spread materials, material assemblies and clothing
BS EN ISO 21534:2007 BS EN ISO 21534:2007. Non-active surgical implants. Joint replacement implants. Particular requirements
BS EN ISO 4373:2008 BS EN ISO 4373:2008. Hydrometry. Water level measuring devices
BS EN 15220-1:2008 BS EN 15220-1:2008. Railway applications. Brake indicators. Pneumatically operated brake indicators
BS EN 15327-1:2008 BS EN 15327-1:2008. Railway applications. Passenger alarm subsystem. General requirements and passenger interface for the passenger emergency brake system
BS EN 60730-2-3:2007 BS EN 60730-2-3:2007. Automatic electrical controls for household and similar use. Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps
BS ISO 7176-5:2008 BS ISO 7176-5:2008. Wheelchairs. Determination of dimensions, mass and manoeuvring space
BS EN 62282-3-3:2008 BS EN 62282-3-3:2008. Fuel cell technologies. Stationary fuel cell power systems. Installation
BS ISO 4195:2007 BS ISO 4195:2007. Conveyor belts with heat-resistant rubber covers. Heat resistance of covers. Requirements and test methods
08/30087659 DC 08/30087659 DC. BS ISO 10140-5. Acoustics. Laboratory measurement of sound insulation of building elements. Part 5. Requirements for test facilities and equipment
08/30087655 DC 08/30087655 DC. BS ISO 10140-4. Acoustics. Laboratory measurement of sound insulation of building elements. Part 4. Measurement procedures and requirements
08/30087650 DC 08/30087650 DC. BS ISO 10140-3. Acoustics. Laboratory measurement of sound insulation of building elements. Part 3. Measurement of impact sound insulation
08/30087646 DC 08/30087646 DC. BS ISO 10140-2. Acoustics. Laboratory measurement of sound insulation of building elements. Part 2. Measurement of airborne sound insulation
08/30087642 DC 08/30087642 DC. BS ISO 10140-1. Acoustics. Laboratory measurement of sound insulation of building elements. Part 1. Test codes
BS 6100-12:2008 BS 6100-12:2008. Building and civil engineering. Vocabulary. Plant, equipment and persons
BS 6100-5:2009 BS 6100-5:2009. Building and civil engineering. Vocabulary. Civil engineering. Water engineering, environmental engineering and pipe lines
ISO/IEC15444-10 : 2008 EDTN1 ISO/IEC15444-10 : 2008 EDTN1. ISO/IEC15444-10 : 2008 Information technology. JPEG 2000 image coding system. Part 10: Extensions for three-dimensional data
BS ISO 12639:2004 BS ISO 12639:2004. Graphic technology. Prepress digital data exchange. Tag image file format for image technology (TIFF/IT)
08/30084137 DC 08/30084137 DC. BS ISO 22538-6. Space systems. Oxygen safety. Part 6. Facility planning and implementation
DD 8483:2008 DD 8483:2008. Cranes. Condition monitoring. Specification for data logging equipment
BS EN ISO 734-2:2008 BS EN ISO 734-2:2008. Oilseed meals. Determination of oil content. Rapid extraction method
09/30082031 DC 09/30082031 DC. BS ISO/IEC 19763-4. Information technology. Metamodel framework for interoperability (MFI). Part 4. Metamodel for model mapping
BS ISO 4706:2008 BS ISO 4706:2008. Gas cylinders. Refillable welded steel cylinders. Test pressure 60 bar and below
BS ISO 9697:2008 BS ISO 9697:2008. Water quality. Measurement of gross beta activity in non-saline water. Thick source method
BS EN 60598-1:2008 BS EN 60598-1:2008. Luminaires. General requirements and tests
BS EN 14506:2005 BS EN 14506:2005. Devices to prevent pollution by backflow of potable Water. Automatic diverter. Family H, type C
BS EN 62059-31-1:2008 BS EN 62059-31-1:2008. Electricity metering equipment. Dependability. Accelerated reliability testing. Elevated temperature and humidity
BS EN 50413:2009 BS EN 50413:2009. Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)
BS EN ISO 4126-3:2006 BS EN ISO 4126-3:2006. Safety devices for protection against excessive pressure. Safety valves and bursting disc safety devices in combination
BS EN 61189-5:2006 BS EN 61189-5:2006. Test methods for electrical materials, interconnection structures and assemblies. Test methods for printed board assemblies
BS EN 1434-3:2008 BS EN 1434-3:2008. Heat Meters. Data exchange and interfaces
BS ISO 14347:2008 BS ISO 14347:2008. Fatigue. Design procedure for welded hollow-section joints. Recommendations
DD CLC/TS 45545-5:2009 DD CLC/TS 45545-5:2009. Railway applications. Fire protection on railway vehicles. Fire safety requirements for electrical equipment including that of trolley buses, track guide
DD CEN/TS 45545-7:2009 DD CEN/TS 45545-7:2009. Railway applications. Fire protection on railway vehicles. Fire safety requirements for flammable liquid and flammable gas installations
DD CEN/TS 45545-3:2009 DD CEN/TS 45545-3:2009. Railway applications. Fire protection on railway vehicles. Fire resistance requirements for fire barriers
DD CEN/TS 45545-1:2009 DD CEN/TS 45545-1:2009. Railway applications. Fire protection on railway vehicles. General
DD CEN/TS 45545-4:2009 DD CEN/TS 45545-4:2009. Railway applications. Fire protection on railway vehicles. Fire safety requirements for railway rolling stock design
BS EN ISO 19132:2008 BS EN ISO 19132:2008. Geographic information. Location based services. Reference model
BS EN 813:2008 BS EN 813:2008. Personal fall protection equipment. Sit harnesses
BS EN ISO 19134:2008 BS EN ISO 19134:2008. Geographic information. Location-based services. Multimodal routing and navigation
BS ISO 20765-1:2005 BS ISO 20765-1:2005. Natural gas. Calculation of thermodynamic properties. Gas phase properties for transmission and distribution applications
BS ISO 8423:2008 BS ISO 8423:2008. Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
BS ISO 18589-6:2009 BS ISO 18589-6:2009. Measurement of radioactivity in the environment. Soil. Measurement of gross alpha and gross beta activities
BS ISO 18589-5:2009 BS ISO 18589-5:2009. Measurement of radioactivity in the environment. Soil. Measurement of strontium 90
BS ISO 18589-4:2009 BS ISO 18589-4:2009. Measurement of radioactivity in the environment. Soil. Measurement of plutonium isotopes (plutonium 238 and Plutonium 239 + 240) by alpha spectrometry
BS ISO 21048:2004 BS ISO 21048:2004. Plastics. Epoxy resins. Determination of 1,2-glycol content
BS 5385-5:2009 BS 5385-5:2009. Wall and floor tiling. Design and installation of terazzo, natural stone and agglomerated stone tile and slab flooring. Code of practice
BS 5385-4:2009 BS 5385-4:2009. Wall and floor tiling. Design and installation of ceramic and mosaic tiling in special conditions. Code of practice
BS EN 4532:2009 BS EN 4532:2009. Aerospace series. Cables, optical, single core 200 μm/280 μm fibre, 2,5 mm outer jacket. Technical specification
DD CLC/TS 61496-2:2006 DD CLC/TS 61496-2:2006. Safety of machinery. Electro-sensitive protective equipment. Particular requirements for equipment using active opto-electronic protective devices (AOPDs
BS ISO 20665:2008 BS ISO 20665:2008. Water quality. Determination of chronic toxicity to Ceriodaphnia dubia
ISO20666 : 2008 EDT1 ISO20666 : 2008 EDT1. Water quality - Determination of the chronic toxicity to Brachionus calyciflorus in 48 h
BS ISO 5834-3:2005 BS ISO 5834-3:2005. Implants for surgery. Ultra-high-molecular-weight polyethylene. Accelerated ageing methods
BS EN ISO 21531:2009 BS EN ISO 21531:2009. Dentistry. Graphical symbols for dental instruments
BS EN 15194:2009 BS EN 15194:2009. Cycles. Electrically power assisted cycles. EPAC bicycles
BS ISO 16055:2003 BS ISO 16055:2003. Tobacco and tobacco products. Monitor test piece. Requirements and use
BS ISO 5834-2:2006 BS ISO 5834-2:2006. Implants for surgery. Ultra-high-molecular-weight polyethylene. Moulded forms
BS ISO 20160:2006 BS ISO 20160:2006. Implants for surgery. Metallic materials. Classification of microstructures for alpha+beta titanium alloy bars
BS ISO 18145:2003 BS ISO 18145:2003. Environmental tobacco smoke. Determination of vapour phase nicotine and 3-ethenylpyridine in air. Gas chromatographic method
BS ISO 18144:2003 BS ISO 18144:2003. Environmental tobacco smoke. Estimation of its contribution to respirable suspended particles. Method based on solanesol
BS EN 15355:2008 BS EN 15355:2008. Railway applications. Braking. Distributor valves and distributor-isolating devices
BS ISO 18280:2005 BS ISO 18280:2005. Plastics. Epoxy resins. Test methods
BS ISO 6780:2003 BS ISO 6780:2003. Flat pallets for intercontinental materials handling. Principal dimensions and tolerances
BS ISO 22742:2005 BS ISO 22742:2005. Packaging. Linear bar code and two-dimensional symbols for product packaging
08/30017005 DC 08/30017005 DC. BS EN ISO 10848-4. Acoustics. Laboratory measurement of the flanking transmission of airborne and impact noise between adjoining rooms. Part 4. All other cases
BS ISO 16872:2008 BS ISO 16872:2008. Short link chains for lifting purposes. Grade VH, fine tolerance for manually operated chain hoists
BS EN 14033-1:2008 BS EN 14033-1:2008. Railway applications. Track. Railbound construction and maintenance machines. Technical requirements for running
09/19984091 DC 09/19984091 DC. BS EN ISO 19906. Petroleum and natural gas industries. Arctic offshore structures
BS 8214:2008 BS 8214:2008. Code of practice for fire door assemblies
ISO15835-1 : 2009 EDTN1 ISO15835-1 : 2009 EDTN1. ISO15835 : 2009 Steels for the reinforcment of concrete - Reinforcement couplers for mechanical splices for bars . Part 1:Requirements
ISO15835-2 : 2009 EDTN1 ISO15835-2 : 2009 EDTN1. ISO15835 : 2009 Steels for the reinforcement of concrete - Reinforcement couplers for mechanical splices of bars . Part 2:Test methods
ISO16840-4 : 2009 ED1 ISO16840-4 : 2009 ED1. ISO16840-4 : 2009 Wheelchair seating. Part 4: Seating systems for use in motor vehicles
BIS Standards Catalogue
|
|
| Partners & Friends |
Wenzhou Nanlong Im & Ex CO.
Supplier ,Exporter & Importer From China,Pipe Fitting,Auto Parts,Home Hardware,V Belt,Valve,Hydraulic Pressure,...
|
|
|
